Computer Support Forum

Avg 7.5 Reports It Is Out-of-date And When I Update It Says Its Fully Up-to-date!

Question: Avg 7.5 Reports It Is Out-of-date And When I Update It Says Its Fully Up-to-date!

Well AVG 7.5 is reporting that it's internal virus database is out-of date so when I update it it says that it is fully updated, but still reports that it isn't. I have no idea what is going on here so if anyoen can help me it would be great!

Thanks, David.

Relevance 100%
Preferred Solution: Avg 7.5 Reports It Is Out-of-date And When I Update It Says Its Fully Up-to-date!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Avg 7.5 Reports It Is Out-of-date And When I Update It Says Its Fully Up-to-date!

I just thought of this, has AVG not released any updates since January 31st 2008? Is anyone else having this problem, I have looked on the internet an the latest updates for AVG 7.5 are January31st.

I think something is wrong here.

9 more replies
Relevance 97.17%

Hi All,

I'm trying to create a Form and a Report in a Database that I've built. Ideally, what I'm trying to do is create a yearly rolling Form (for data entry) and Report (that runs off that data in the table that is updated by the form).

The table I have is essentially this:
Effort in Days August September October November December etc
Project 1 1 2 0 1 1
Project 2 2 2 2 2 2
Project 3 0 0 4 4 4

To make it easier for myself to maintain in the future, I've included fields all the way up to the end of 2018. The reports and forms are pulled from this table.

The stakeholders I've made this for want to a) be able to update projects themselves (easy enough with a form and project search) and b) have the reports on a yearly view. My current solution is to delete the forms and reports each month and then recreate them, moving the months out to the right. This has been fine up until now as it's essentially been in UAT/ proof of concept. Now we're starting to properly use this and I do not have the time to spend forever updating this every month.

The reports and forms are pulled from a query that is currently this:

SELECT RealTime.[Project Name], RealTime.[Employee Name], RealTime.PPM, RealTime.[Actual or Prospect], RealTime.[01/08/2016], RealTime.[01/09/2016], RealTime.[01/10/2016], RealTime.[01/11/2016], RealTime.[01/12/2016], RealTime.[01/01/2017], RealTime.[01/02/2017]
FROM RealTime
WHERE (((RealTime.[Actual or Prospect])="Actual"... Read more

Answer:Can you create Reports and Forms that update based on date?

Apologies - the numbers under the months didn't come through clearly. What it should be is the months as column headers and the project name and effort in days per month under each project/ month.
 

3 more replies
Relevance 93.07%

Windows repeatedly asks me to update with the little yellow exclamation mark in the tray but it always fails and then keeps asking over and over again. It's trying to update something I don't even use I think PowerPoint or something; I had the option off at one point for those programs so it wouldn't keep asking but then a message pops up saying are you sure you want to leave these off you might need them.

Any ideas on how to get past this?
 

Answer:Windows Update...date...date...date....

Have a look at this link and see if it helps.

http://support.microsoft.com/kb/910339/en-us
 

1 more replies
Relevance 90.61%

The AVG on my Dell thinks the Virus database is out of date even though it has the most current update?

How can I change the date back and what might have caused this to happen in the first place. I've heard of some AVG update problem but didn't find much relevant information on it.

Any suggestion or links would be great.

Thanks,
Andre
 

Answer:AVG Free wrong date set; Update thinks it's out-of-date

Check the date on your computer.. And, maybe uninstall AVG and reinstall it..

http://www.majorgeeks.com/AVG_Free_Edition_d886.html
 

2 more replies
Relevance 88.97%

When viewing the software downloads page, all of the update dates are newer than the release dates.  And they are all very close to current date (Jun 20).  Running the HP tool doesn't show any update is needed.  So I'm puzzled. Are all these drivers/patches really out of date or is the earlier release date still the correct one.  Surprised that every available update shows close to current date.    

Answer:Update Date does not Match Release Date

Hi: The date you see next to the actual driver exe file is the correct driver date. The 'update' date you see is because HP redesigned the website and had to upload many of the drivers again.

1 more replies
Relevance 83.23%

I am trying to pull a date from a database using VB 6 and pass that date into a Crystal Report. The .ttx file has the date set up correctly, and when I preview the information, the date is there.

When I use the recordset, the date is not being pulled from the recordset. Is there something I need to do to get the date from the recordset? I can concatenate the information into a string, and it shows up in the report.

Thanks!
 

More replies
Relevance 83.23%

I am trying to make a pop up form with two text box controls. One is named txtBegin and the other is txtEnd. The two controls are for dates. I want my report to only show records that fall between txtBegin and txtEnd.

I am having a lot of trouble getting this done, I did try it as a parameter query set like this >=[Begin] And <=[End] but I would prefer to do it with the form.

I can open another report with this:
DoCmd.OpenReport "GRTimeSheet", acViewPreview, , _
"[EntryPerson] = '" & [txtEntryPerson] & "'" but that is working with one text string. I am working with two and using dates. The MS Northwind database has an example of what I am trying to do but I am not following the code and it requires you to have the report open first. Any ideas?

------------------
Building the Ultimate site list for PC support.
 

Answer:Date range criteria for reports

10 more replies
Relevance 83.23%

I'm hoping someone can help me with this....

I am grouping by week. The issue that I have is the grouping date that I am using does not always have activity for every day.

Example weeks go Sunday to Saturday
for week Sept 12 thru 18th there is only data for the date of spet 15th. So in my grouping header it used the 15th as the start date.

I want to be able to list start date and end date for each week.
It would look like this.

9-12-2010 to 9-18-2010
9-19-2010 to 9-25-2010
 

More replies
Relevance 82%

My granddau has an HP Pavilion Entertainment PC, AMD Turion 64x2, running Vista Home Premium. She has continually been unplugging the laptop without a proper shutdown. Now that I know this, I've tried to restore to a previous date, but the administrator side will not perform a complete restore. On the user account it won't restore at all & just maintains a blue screen with taskbar.

Any suggestions of how to get a complete restore without having to attempt a restore to factory defaults.

Help!!!
 

More replies
Relevance 81.18%

I recently bought a Fujitsu-Siemens PC with Norton InternetSuite pre-installed. I have tried on two occasions to update the ELL files. every time I access Norton to scan my PC and I see a report saying my library is still dated Nov 2005.When I access the Symantec folder on my C drive I can see 2 ELL folders dated last week and yesterday alongside the one for Nov 2005.THe question I need to be answered is how do I get these files into my library (they are not zipped files).joncuk

More replies
Relevance 80.36%

W520 - Slow Wired EthernetI bought my w520 in late 2011, added RAM and an mSATA, and I use it still for photography tethering and everyday computing. It is equipped with an Intel 82579LM NIC. I have moved to a community with "gigabit" home Internet service and find to my amazement that this w520's LAN connection is slower than the wireless on the G or non-G band. Something is way wrong here. Other Win7 Pro machines on the same network and wired through the same switch are getting 6 times the speed. The adapter's Properties panels show driver 12.15.30.0 installed on 8/18/2015, and declines to install anything newer. There are a lot of detailed properties to set in a NIC and I'd appreciate suggestions about any choices for better flow in the Advanced Properties list. I am also searching this forum for suggestions. Most delve into wireless optimization. I am certainly used to the idea that the NIC "just works" and the wireless is sketchy... not this time. Thanks, in advance, everyone.





4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

More replies
Relevance 79.54%

I just bought a Thinkpad E420S laptop. The DVD player worked once, but as I was updating the drivers and windows 7 I got a message that there is an issue with the hardware. Tried to uninstall and reboot, but its not working. According to windows the driver is up to date! Any idea how to solve the issue without returning it?Thanks The error message:Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

Answer:E420S DVD player not fully recognized, driver up to date/error code 19

Hi
 
Welcome to the community.
 
As per your concern, I would suggest you to please perform the following steps.
 
1. Please type regedit in the search field.
2.  HKEY_LOCAL_MACHINE
3. SYSTEM-> CurrentControlSet->Control->Class
4. Select 4D36E965-E325-11CE-BFC1-08002BE10318
5. If a LowerFilters/UpperFilters value is listed on the right side of the registry editor window, select the LowerFilters/UpperFilters value and press the Delete key.
6. Close the Registry Editor and restart the system.
 
Also check the DVD drive is recognized in the Bios mode or not.
 
Regards,
Sameer





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 77.9%

I got a Refurbished Dell Latitude D600 Laptop from ebay yesterday on Tuesday, September 26th 2017, It had Intel Pentium M (Non-Centrino) and Windows XP Pro SP3, but when i boot it up, it resets to The Default BIOS Date, can someone help me?

Answer:Dell Latitude D600 Current Date Resets to The Default BIOS Date

The coin cell battery on the motherboard that keeps time while the system is powered off is probably dead.  Not too surprising given that the D600 is about 15 years old at this point.  If you open the system up, it should be easy to find, so just note the type of battery, e.g. CR2032, and then buy that type of battery at any grocery/convenience store.  Should only be about $2-3.

2 more replies
Relevance 77.9%

First the background: We are gradually deploying Office 2007, but not everyone in the agency has it. I have both 2003 and 2007 installed on my system, but I do my work in 2003, and none of our databases have actually been converted to 2007 format (at least, none that I work with). There are occasionally people who use 2007 when viewing databases, but I don't know if any of the people who are working in this particular database are using 2007. The problem is reproducible in 2003 and so I've been trying to fix it here. The query behind the problem report used to work. It has been a problem for several months (it is run monthly, and every month for the past five they've had problems with it) and I've finally gotten to the root of the actual issue.

The purpose of the report is to generate invoice for outstanding loans. The DateNextPayment is a calculated field based on the payment plan for the loan. It is calculated using a function in the query named qryGetSitesDDInvoices1. This is the function that is called (I did not write this function, I'm supporting this db long after the original writer has left):
Code:
Function DateNextPayment(PaymentSchedule As String, DateFirstPayment As Date, Balance As Currency)

On Error GoTo Handle_err

Dim Date1 As Date
Dim Date2 As Date
Dim Date3 As Date
Dim NextQtrDate As Date

'The code adds one month to datenextpayment at start of each month. Or yearly or weekly

... Read more

Answer:Solved: Date Parameter Failing in Query from calculated date field using DateValue Ac

16 more replies
Relevance 77.9%

Greetings, and thanks in advance for your help..

Awhile back I formatted my Windows 10 PCs to show ddd dd-mmm-yyyy on my taskbar clock. This worked happily on my desktop and laptop for months, maybe even a year +

Now (probably starting in the past couple days, if not today), on one of those two PC's, this format will no longer display. It is Okay on the other PC.
What has changed that the taskbar clock space used to expand to fit the "short date" format, but now it will no longer expand - and instead just refuses to display the date at all. (NOTE: I've verified the issue by testing shorter formats -- short formats, like "ddd" show up correctly. Only if you request a longer format will the date not display - evidently because it is too long for the clock area. )

Additional Notes that may help:

* "Working" pc is running build 10586 PC with too small a clock space that won't expand -- Build 14393

*Other differences: Notification/Action center Icon is left of clock on the working PC - Right of clock on the non-working
Right- Clicking on task bar gives "properties" option on working PC -- But "Settings" option on the non-working

( I don't want to prejudice responses - but clearly the implication to me is that some recent OS update is most likely the culprit.)

Thank You

Answer:Taskbar Time / Date area quit expanding to fit desired date format

I had a similar problem which has been greatly ameliorated thanks to a kind respondant - see https://www.tenforums.com/installatio...-new-post.html

1 more replies
Relevance 77.9%

Help! I am using a Seagate Central 4TB NAS drive attached to my router via Ethernet. It has been working fine so far for all kinds of file activities. But whenever I modify a file in one of its folders, the creation date for the file also updates and is
changed to the same time as the new modified date.
Maybe relevant details:
I can move/copy folders to the drive and they maintain their created dates.
It happens for both a private user share on the NAS and for the Public share on it.
It happens for at least image files and text files.
I am able to edit files across two computers on the network just fine, the create date stays the same.
This happens from a new Windows 10 machine and Vista machine both.
I notice sometimes the date created seems to stay same until I access the file the next time.
I can't update the NAS firmware because of error.

If it could be a permissions problem, I have been unable to change it from:
Everyone: Special Permissions only
nobody (Unix Group\nobody): Special Permissions only
nogroup (Unix Group\nogroup): Special Permissions only
(Those were there automatically, they are not something I manually put there. I get "Access is denied" whenever try to add permissions or change ownership.)

I have Googled many phrases of this problem far and wide and come up with nothing. I really need to save the original create date because that's how I sort them in programs like Windows Photo Gallery or Picasa. Does anyone know what's goin... Read more

More replies
Relevance 77.9%

Greetings, and thanks in advance for your help..

Awhile back I formatted my Windows 10 PCs to show ddd dd-mmm-yyyy on my taskbar clock. This worked happily on my desktop and laptop for months, maybe even a year +

Now (probably starting in the past couple days, if not today), on one of those two PC's, this format will no longer display. It is Okay on the other PC.
What has changed that the taskbar clock space used to expand to fit the "short date" format, but now it will no longer expand - and instead just refuses to display the date at all. (NOTE: I've verified the issue by testing shorter formats -- short formats, like "ddd" show up correctly. Only if you request a longer format will the date not display - evidently because it is too long for the clock area. )

Additional Notes that may help:

* "Working" pc is running build 10586 PC with too small a clock space that won't expand -- Build 14393

*Other differences: Notification/Action center Icon is left of clock on the working PC - Right of clock on the non-working
Right- Clicking on task bar gives "properties" option on working PC -- But "Settings" option on the non-working

( I don't want to prejudice responses - but clearly the implication to me is that some recent OS update is most likely the culprit.)

Thank You

More replies
Relevance 77.9%

The title is self-explanatory. So far, I found a software that is able to change this called 'Attribute Changer' but it only changes the date modified in the folder and, when you go into the actual word application > file > info, the date created and modified are not changed. Any help would be greatly appreciated! Thank you!
 

Answer:Changing 'date created' and 'date modified' in Microsoft Word 2013

7 more replies
Relevance 77.9%

Hello.
I'd like to see Long Date and Long Time in my System Tray instead of Short Date and Short Time. 
But due to some restrictions connected with my work I can not modify Short Date & Short Time to look how I want them to look in System Tray.
So basically I need Windows to show what is set as Long Date & Long Time in System Tray instead of showing Short ones.

Is it possible? Maybe some registry tweaks?

Answer:How to display Long Date in System Tray (without modifying Short Date)?

Hi,
There is no workaround to display the Long Date in taskbar without modifying the Short Date parameter.Ivan-Liu
TechNet Community Support

8 more replies
Relevance 77.9%

Hey guys,
I have a question about coding and setting an excel file to send emails. I am using an excel file to track maintenance work orders and I would like to get an email each day for each work order that is requested to be finished on that days date. I have attached the excel file I am using, and the column that is important is C, "Date Needed" - If that date is today's date, the cell turns red and I would also like to get email notification about it. A separate email for each cell that matches today's date.

Also, if possible, I would like for it to look at all the sheets, not just the current month's sheet. For example, if a work order was filed in July but wasn't needed until September, I would still like to get the email reminding me that it needs to be finished on xx date in September.

I have attached the excel file I want to use.

I have searched all over this forum and others and have found many posts similar to this, but I am not a great manipulator of code, so I cannot get any of the other solutions to work.

Any help would be greatly appreciated, thanks!
 

Answer:Solved: Using Excel 07 to Send Emails When Date in Column = Today's Date

16 more replies
Relevance 77.9%

It looks like the 31 March deadline for the latest Edge promotions is the date of invoice rather than the date of order. Given Lenovo's reported long build time and slow delivery (= late invoice), I suspect that ording now from the Lenovo web site will see an invoice date outside the qualifying period. Even a dealer who says he can 'get one in' may not deliver and invoice until April or beyond. I think the only option is to find a dealer who unequivocally has current stock.Can anyone shed any light on the likely position. I do, though, wonder about trying to take advantage of Lenovo Cashback at all, given the horror stories reported here.

Answer:Edge 31 March promotion deadline - order date or invoice date?

My experience with cashback is a deathly silence from Lenovo to emails asking for progress on the cash or even recognition that there has been a registration for cashback...Currently considering giving Lenovo some publicity on the matter.Unless you have a lot of time to possibly get no where I would steer clear of the alleged cashback scheme...

1 more replies
Relevance 77.9%

Searching for files modified in a specified date range (of the past 3 days) gets a search result list titled "date modified", and with the column heading "Date Modified" but the date listed against a file modified today is wrong. The date displayed matches the file creation date & is within the specified range ... but how do I know what the Search is doing?

Can't trust it... !

Answer:File search (by date range) displays incorrect Mod Date in results

That is very strange. Bump for a possible solution, since I can't think of one off the top of my head.

1 more replies
Relevance 77.9%

hello to everybody

I need batch code to check if date is modified in three files and that date should be compared with current date (%date%).If so,do some job,otherwise quit (exit /b)

I found a bunch of solutions but what troubles me is date format.
On my machine it is dd.mm.yyyy

Thanks in advance.
 

Answer:Solved: batch to compare file modified date with current date

10 more replies
Relevance 77.9%

Hi! Does anyone know what is the format of the date in the field "(battery) Manufacture Date" informed by Lenovo Vantage (Hardware Configuration > Energy)? It seems not to follow Windows setting. In my case, it is set to Brazilian Portuguese DD/MM/YYYY, but there is not a leading "0" in the returned value (see attached image). Does it really disregard the Windows setting and presents it in a fixed format (maybe American English)? When was my battery manufactured (Oct. 07 or July 10)?Thanks in advance.  

More replies
Relevance 77.9%

After running a large update of windows on May 18 I found that ALL my files in ALL my folders are showing a Date Modified of May 18 2013. Can't find a similar report of this problem. Any ideas?
Using Windows 7 Professional 64-bit

Answer:File Date Modified reset to today's date after windows Udate

Would this help? enter link description here

1 more replies
Relevance 77.9%

I forgot my new mobile password.Also i remove battery then time setting is now incorrect.I try 5-6 type to set password

Answer:I forgoet my scree lock password?Also i remove battery ow date setting is not current date?

hard reset your phone using following steps :-
1. Turn off your Windows Phone. Use power button to power off the phone.
2. Press and hold Volume down key and connect the charger to phone. You will see a big exclamation mark on the screen.
3. Press these keys one after another in the same sequence. Volume Up, Volume Down, Power, Volume Down.
4. You will see the phone reset and boot normally. You will see wheel gears working on the screen. It will take few minutes.
Your phone will be reset to factory settings and you need to set up the phone again.
Or try to reset phone's setting if it is connected to Wi-Fi or data is enable through your account.

more replies
Relevance 77.49%

I need to return a number associated with a date based on today's date. For example: A1:A24 are numbers 1 to 24 and B1:B24 contain the 15th and 30th for each month of the year; 15-Jan, 30-Jan, 15-Feb, 28-Feb, ... 30-Dec.Cell C1 needs to return the number from A1:A24 based upon today's date compared to the date in B1:B24.For example today is 08/21/15, what number should be returned in Cell C1. It should be 15 as 08/21 is less than 30-Aug.message edited by jmichels

Answer:Return a number based on today's date compared another date.

Try this formula, see how it work for you:=INDEX(A1:B24,MATCH(TODAY(),B1:B24,1),1)This will work for most dates, but errors out if the Date is 01/14/15 or less.MIKEhttp://www.skeptic.com/message edited by mmcconaghy

4 more replies
Relevance 77.49%

I'm working on a spreadsheet that lists monthly recurring expenses. I have one cell on the sheet listing the current date (using the "=Now()" formula), but I'd like to have the other cells change at certain times throughout the month.

For example, if one cell currently says "April-15", when the actual date reads "April-16", the respective cell would change to "June-15". This way, whenever the spreadsheet is viewed the next recurring payment date will be seen.

I know this is the wrong tool for something like this - I'm using SharePoint at the office with a calendar list with workflows that shoot off emails in a much better put together format - but this is just for home use and I'd like to keep it all in one document if possible.

Any ideas or suggestions would be greatly appreciated. Thanks in advance.
 

Answer:Excel 2010: Cell Date Change with Current Date

The way I read it was that you have fixed recurring payment dates, so you just want to know the next date based on the day today. Hope the attached might assist.
You need to list the payment dates somewhere and then the formula looks up the next date. You might want to look up today plus 1 (or something) to reflect the fact that if the next payment date is today, there's a good chance you'll not get any unplanned payments on that run.
 

1 more replies
Relevance 77.49%

Hi all,I wish to create a macro that when i click a button i can input what month i wish to print out data for. I have 7 columns (A-G).Date Day Activity Income 02/01/2012 Monday Work (8) 48.00 02/01/2012 HMOT 5.00 02/01/2012 Peter Taylor 134024855 HMOT 5.00 02/01/2012 Susan Taylor 134023422 HMOT 5.00 02/01/2012 Steve Davy 13402737404/01/2012 Wednesday Work (8) 48.00 04/01/2012 HMOT 5.00 04/01/2012 Tom Thompson 134027410 HMOT 5.00 04/01/2012 John Ackroyd 134025131 HMOT 5.00 04/01/2012 Aftab Ilahi 134022546Above is an example of the sheet.In column A we have the date, B we have the day, C we have the activity, D we have the income, E is a cell with the previous month date in to track data for the month, F is a name and G is a number.I wish to be able to print all of january for example, rows A-G by clicking a button and entering something like 'january' or '01/12'. This will then select all of the rows with data in based on the date range in column A and print the selection.Please feel free if that doesn't make sense to ask questions.Thanks in advance.

Answer:acro to input date and print based on date range

Below is the code I have for a macro which I can't seem to get to work right.Thanks.
Public Sub PrintMonth()
On Error GoTo Proc_Error

Dim wksCurr As Worksheet
Dim rngTarget As Range

Dim strInput As String
Dim datInput As Date
Dim datStart As Date
Dim datEnd As Date

strInput = InputBox("input start date for month", "Enter date")
If strInput > "" Then
datInput = CDate(strInput)
If datInput > 0 Then
Set wksCurr = ActiveSheet
Set rngTarget = wksCurr.Columns(4)
datStart = WorksheetFunction.EoMonth(datInput, -1) + 1
datEnd = WorksheetFunction.EoMonth(datInput, 0) + 1
With wksCurr
If .AutoFilterMode Then
.AutoFilterMode = False
End If
.UsedRange.AutoFilter Field:=rngTarget.Column, Criteria1:=">=" & datStart, _
Operator:=xlAnd, Criteria2:="<" & datEnd
.PrintOut
.AutoFilterMode = False
End With

Set rngTarget = Nothing
Set rngDate = Nothing
Set wksCurr = Nothing
End If
End If

Proc_Exit:

Exit Sub

Proc_Error:

Select Case Err
Case Else
MsgBox "Error " & CStr(Err) & ": " & Err.Description
Resume Proc_Exit
End Select

Exit Sub

End Sub

3 more replies
Relevance 77.49%

Hi all,I need dos command to compare the file creation date and the modified date.My scenario is,If user inputs the folder path to the batch file, i have to provide the file list (which are under sub folders of the given folder) ,which do ot have creation date and modified date as same.can anyone help in thisThanksVanisree

Answer:Dos command to compare file creation date and modified date

You need a CMD.EXE Command Prompt solution, XP does not have MS-DOShttp://ss64.com/nt/ARM Devices are the future, great British Design !

2 more replies
Relevance 77.49%

I have a field that reads 2009-12-30-15.42.22.81298 as text. i want to make in be a date of 12/30/2009 15:42:23 and ignore the milliseconds. Is this possible?

Thanks
Ted
 

Answer:Converting complex date text fields into date or numbers

Ted, what software are you talking about?
Are there always 8 values in the date part?
 

3 more replies
Relevance 77.49%

Hi all,

I'm new to Windows 7 (Home Premium 32-bit) and I just can't figure out what's going on here! Basically I want my short date format to be dd/mm/yyyy (UK format) e.g. 05/11/2010, but when I key a date into Excel 2002 it is appearing as 05 11 2010. In Control Panel I have the short date format set to ddd dd/MM/yyyy and the example is shown as Fri 05/11/2010, but in Excel all the date formats are shown with space separators, e.g. 14 03 2001! I don't think it's an Excel problem though as in Windows Task Scheduler the dates are shown with spaces there e.g. '19:25 on Mon 01 11 2010'. The date by the clock though is shown correctly with slash separators!

I know in Windows XP you can select the date separator from a drop-down list, but this option seems to be absent in Windows 7. Under HKEY_CURRENT_USER\Control Panel\International in the registry, sDate was set to a space, but changing that to a slash (and rebooting) didn't fix the problem.

Does anyone have any ideas please what's wrong and how to fix it?

Thanks
Steven

Answer:Date format using space as date separator rather than forward slash!

Hi,

The option you're after is controlled from within Excel. If you right-click the cell(s) in question you can select 'format cells' and under 'Date' you can select the desired format.


OS

9 more replies
Relevance 77.49%

Somehow the date on one of my old Excel files has turned from 1999-10-04 (i.e. October 4, 1999) to 4617-04-11. How can I change all the rest of the incorrect dates back to what they should be? This is the only date that I can confirm. And I have no idea what the rest of all the dates should be on this spreadsheet. TIA.

Answer:Excel date problem - to convert incorrect date to original

I have no idea what the rest of all the dates should be on this spreadsheetThen how do you purpose to change them, when you don't know what year they are supposed to be?Somehow the date on one of my old Excel filesAny Macros running that may have in some way impacted the dates?How is the data stored? As Text or as a Date?MIKEhttp://www.skeptic.com/

5 more replies
Relevance 76.67%

Hello, I have spreadsheet with a number of dates and times ie (11/19/07 8:57 AM) in column A and data going along with each of these dates and times from columns B-CK. I am trying to limit the list to show the information that is for all times after 2:45PM. The problem is I cannot sort by time and the dates attached to all the times span from 2004-2007. Please help!
 

Answer:Stripping the date portion of date/time in excel

7 more replies
Relevance 76.67%

Excel 2013 and Windows 10 Pro

Today is May-14

Date format is set to show: Mar-16
Pressing Ctrl+; shows: 05 14 2016 in the cell
and it converts to: May-16 after I exit that cell.

Any ideas as to how to fix this or why it adds 2 days to the date?

I don't do much on computer now because of health but when I do and there is a problem, I know some of the experts are here.

Thank you in advance, Ron
 

Answer:Excel Date shortcut posts proper date and then changes

Hey Ron,

This should be a fairly simple one. I'd hazard a guess and say the May-16 is the month and year rather than the month and day.
If you click the format drop down as shown below, and click the last option for more formatting options.

In the box that pops up, navigate to Custom using the left hand panel to navigate.
Here you can make your own (or use a preset if you wish) format to suit your needs.

Here is a quick key to help you get by:
dd = Day in Number format
ddd = Day in Short text
dddd = Day in Long text
mm = Month in Number format
mmm = Month in Short text
mmmm = Month in Long text
yy = year in 2 digits
yyyy = year in 4 digits

You can separate these with pretty much whatever you want.
All of this data is input into the "Type" field as shown in the picture above.

See the picture for an example, Ironically it is May 16th today so it will appear the same as your issue does, but rest assured, as long as you have those D's in there, it will display the day!

Best of luck,
Let us know how you get on,

Xsage
 

1 more replies
Relevance 76.67%

So I have this excel spreadsheet and an example of it basically looks like this:
Project Phase Person Capacity Start Date End Date
A Design 1 25% 1/15 3/16
A Model 1 25% 3/17 5/11
A Design 2 25% 1/15 3/16
A Model 2 25% 3/17 5/11

I'm looking to track a monthly outlook of capacity % over time for each person (in a pivot table), but I'm unable to get it exactly the way it should be. Essentially I would like it to look like this below:

Dates
Person Jan Feb Mar Apr May
1 25% 25% 25% 25% 25%
2 25% 25% 25%

Is this even possible, either in a pivot table, or even using formulas?
 

Answer:Excel 2007 - Start Date and End Date question

You should have posted that in "Business Applications" here: http://forums.techguy.org/16-business-applications/
 

3 more replies
Relevance 76.67%

ok i have a folder on my HD that contains over 60GB of data. within this folder there is many folders and files. is there a way of simply selecting this main 60GB folder and useing a prog to make all the file and folders have the same date/time that i wish?

i basicly want all the files and folders in this 60GB folder to be ...say todays date / time.

can this be done?
 

Answer:file date on a 60GB folder - setting them all to the same date? can it be done?

http://www.febooti.com/products/filetweak/

40 day fully working trial version.

Looks like it will do what you want.
 

1 more replies
Relevance 76.67%

I have a Date/Time field that I need converted to just a Time field.

It comes back with 2/11/12 0:00:00

I need just the 2/11/12

I thought about changing it to a text field but I think there will be an issue with the month because it does not bring back a 0 in from the months with only 1 digit.

This table that I am creating is being sent to a txt file and that is where I see the issue. It looks good in Access, but not the txt file.

Any suggestions?
 

Answer:Solved: Access - Convert Date Time to Date

10 more replies
Relevance 76.67%

Hello, I am having trouble finding the previous 2 days totals in a query. I have a totals query with the following fields:
JobID - Criteria: Between 500 And 599
WorkType
JulianDate
Batch
TotalProcessed - calculated field, grouped on Sum. sums field entry
ProdDate - Short Date - Grouped on Where - Criteria Date()-1 Or Date()-2

Today's Julian Date is 199 so query should give me Julian Dates 197 & 198, but instead returns Julian Dates 188 - 196.

Thank you for your help!
 

Answer:Solved: AC2007 Find Date()-1 And Date()-2 in Query

The criteria that you should use for a date period is
Between Date()-1 and Date()-2
 

2 more replies
Relevance 76.67%

I accidentally formatted the date cell & it only accept numbers

Answer:how to correct a date field when you enter a date a number a

I don't know what you mean by "it only accepts numbers".Why can't you just format it as a date again?Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

2 more replies
Relevance 76.67%

The column heading in Win 10 File Explorer is 'Date'. But which one?

I've always been used in XP to the default being 'Date modified', but it seems that here it's Date created? Several re-saves have left 'Date' unchanged.

--
Terry, East Grinstead, UK

Answer:File Explorer Date column - whiich date is it?

Hi:
What is the column in Windows 7 explorer? It matches no date column from Windows XP explorer - Super User

2 more replies
Relevance 76.67%

Hello,

I have a large report of application forms which have been submitted including the date when they were submitted however the dates are formatted incorrectly.

1. Although the cell formatting is dd/mm/yyyy the data is being shown in mm/dd/yyyy which means the dates are incorrect (e.g. 2nd January would read as 1st February.)
2. As a result of this dates which are passed the 12th of a month are not accepted as dates (it reads the day figure as months and there is no 13th month etc)

I have tried to use the text to columns function but that makes no difference and I have tried to extract just the dates but I've had no luck.

Can anyone help, I've attached a small sample of the data.

Thanks

Daniel
 

Answer:Exported date field not recognized as date in Excel

Where does the data come from?
What do you get if you have no cell format?
 

3 more replies
Relevance 76.67%
Answer:ican not set date and time an error is occurewhile date and

Enter the BIOS & change the date/time. If it resets after the system has been shutdown for a while & then restarted, the CMOS battery is probably bad.

2 more replies
Relevance 76.67%

So I have this excel spreadsheet and an example of it basically looks like this:

Project Phase Person Capacity Start Date End Date
A Design 1 25% 1/15 3/16
A Model 1 25% 3/17 5/11
A Design 2 25% 1/15 3/16
A Model 2 25% 3/17 5/11

I'm looking to track a monthly outlook of capacity % over time for each person (in a pivot table), but I'm unable to get it exactly the way it should be. Essentially I would like it to look like this below:

Dates
Person Jan Feb Mar Apr May
1 25% 25% 25% 25% 25%
2 25% 25% 25%

(Sorry, the text keeps left aligning so person 2 should actually have 25% under Mar, Apr, and May.)

Is this even possible, either in a pivot table, or even using formulas?
 

Answer:Excel 2007 - Start Date and End date question

16 more replies
Relevance 76.67%

I received a .csv file from a company with a date field that looks like this: Tue Jan 03 12:12:20 PST 2012I have tried using the Data Type options to change this to a mm/dd/yyyy format but it will not apply. I tried converting it to a serial number using*mm/dd/yyyy and it will not work ~ nothing happens. I tried using a DATEVALUE formula but keep getting a #VALUE error .. I obviously don't know how to lay it out. Can anyone give me the DATEVALUE formula for this example? I am not sure what "right", "left" or "mid" represent or how to count the value placements. THANKS!!!

Answer:How do I convert a complex date to a simple date in Excel?!?

Try this:With your date in cell A1,First, format cell B1 as a DATE fieldRight click your mouse, select Format Cell, Select Number Tab,select Date, choose the date format you want.Next, in cell B1 enter the formula:=DATEVALUE(MID(A1,5,3)&" "&MID(A1,9,2)&", "&RIGHT(A1,4))That should give you what your looking for.MIKEhttp://www.skeptic.com/

3 more replies
Relevance 76.67%

Hi All,
I am using LUMIA 1320 that has Lumia Cyan.
Sometimes the time and date is getting reset to a specific date, i.e. 22nd May 2014
Due to this all reminder, alarms and new messages are not coming in sync.
Is this a virus? Does it have come from an app. If that is the case then it questions Microsoft App policies...
Anyone who has encountered this issue and has done something to eradicate it let me know.

Answer:Why is my phones time and date getting reset to a specific date?

First, windows phone can never get a virus. Its the safest platform after iOS . And no, a particular app can't affect the system's time and date. I think your should try to manually set the time and date in the settings. And see if it works.

3 more replies
Relevance 76.67%

I am using the "microsoft access date/ time picker" control to pick dates. These dates like termination date of a contract will end up in the database. The problem I have is that when I do this,

rst!dateIntoForce = Me!ActiveXCtlDOForce

I end up with this in my database:

1/6/2003 5:48:43 PM

How can I extract only the date part from "1/6/2003 5:48:43 PM" so that only

1/6/2003

goes into the database
Thanks
 

Answer:Date Part only from MS Access Date picker control

Format the date before it gets entered into the db. Format([Date], "m/dd/yyyy")
 

1 more replies
Relevance 76.67%

I am looking to set up a macro or formula that basically inserts the current time when a cell is filled SO:

when a2:a100 is populated with any thing then the corresponding C cell will be populated with the time.

AND

when e2:e1000 is populated wiith anything then the corresponding D Cell will be populated.

Currently I am using this macro.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A6:A100")) Is Nothing Then
With Target(1, 4)
.Value = Time
.EntireColumn.AutoFit
End With
End If
End Sub

which works great for the A and C cells

but it does not work for the other one.. how do i add and modify this so all my needs are met.
I need another 2 sets of 2 macros accross the sheet for time entry.
 

Answer:Excel date auto populate date/time

11 more replies
Relevance 76.67%

Dell Dimensions XP PC bought 9 years ago.On opening date 7 time reverts to date of purchase.Can change and all ok.Can anyone Help Please? Thank you

Answer:Date & Time reverts to Date of PC purchase 9 Years Ago

Wait for the more knowledgeable to report but a new CMOS Battery would seem to be in order.
Easy to replace and only £1, or so, to buy, in almost any Supermarket.
About the size of a 10p piece on the motherboard, with a number like CM032. Don't take it out until you are ready to replace it.
Get the replacement > Take the old one out > Instal the new one and, with luck, that should be it.

6 more replies
Relevance 76.67%

Hi there

I know how to do add a criteria to a Query. For example in the QBE pane in design view in the criteria row I enter this statement: Between [Start Date] And [End Date]. When I open up the form that is bound to the query, a message box pops up and I enter the required dates and I get the required data that is between the dates that I specify. However, I'm now finding out that this method is now becoming a nuisance.

Is there a way that I can have 2 unbound controls - one for the start date and the other for the end date in a criteria form. This way I input the dates I want for a particular customer and the form with the required data shows up. For example, I have already developed a criteria form for customers. I have an unbound combo box control that has customer names and when I click on a particular customer name, all the data for that customer is displayed in a form. In the row source of the unbound combo box control there is a SELECT .... FROM ... statement. I also have a button next to the unbound combo box control that opens up the form for that particular customer. Now I want to add two more Unbound controls in the criteria form, one for Start Date and another for End Date.

This way I can select a customer from the customer combo Box, select the start start date from the start date combo box and the end date from the second combo box control and get the desired data for that particular customer between the specified dates. I have attempted to do this bu... Read more

Answer:Access - Start Date and End Date in a Criteria form

Mario: What you want is called a query by form (QBF). I don't know how to do them myself, offhand, but here's the MS Technet article:
http://support.microsoft.com/?kbid=235359
 

2 more replies
Relevance 76.67%

I want to calculate how long a member of staff has worked for the company and therefore need to subtract their starting date from the current date.

Answer:How to subtract a date from a date ie years/months elapsed

If you use google to search:Time elapsed calculatorThere are a few online results to help. I hope they help. For the fun of it I calculated how long I have been in existence : 2,177.43 total weeks or: 15,242.00 total days or: 365,808.00 total hours or: 21,948,480.00 total minutes or: 1,316,908,800.00 total secondsThat was from the first result google gave me. Thank god no one will be able to figure out when I was born. message edited by btk1w1

9 more replies
Relevance 76.67%

Dell Dimensions XP PC bought 9 years ago.On opening date 7 time reverts to date of purchase.Can change and all ok.Can anyone Help Please? Thank you

Answer:Date & Time reverts to Date of PC purchase 9 Years Ago

http://www.pcadvisor.co.uk/forums/1/tech-helproom/4204823/date-amp-time-reverts-to-date-of-pc-purchase-9-years-ago/
see duplicate thread

1 more replies
Relevance 76.67%

Eg: In the below table (Excel) right now date is numeric want to convert them to DATE format Date of Birth Sex Date of diagnosis1 1/07/41 F 21.02.092 12/06/90 M 2/24/22614 1/07/62 M 11/02/095 1/07/48 F 26.05.096 1/07/39 F 11.02.097 1/07/76 F 2.05.098 1/07/60 F 30.05.099 1/07/80 F 1.03.0911 1/07/56 F 22.03.0914 1/07/65 F 22.02.0916 1/07/74 M 22.02.0917 1/07/67 F 24.03.0919 1/07/33 M 25.02.0920 1/07/45 F 21.03.09

Answer:Convert multiple date entries to DATE format

Whoever wrote the file couldn't even decide on a standard date format. Needs two routines. I prefer to normalize to yyyy/mm/dd.

7 more replies
Relevance 76.67%

I have a file that lists a Julian date of, for instance, 37573. How do I convert that into something like 11/06/02?

Thanks in advance!
 

Answer:Julian Date--How to convert to calendar date in Excel

That's not a Julian date, Beth.

That is actually a date value that Excel provides.

That's how many days it's been since 1/1/1900.

To change it to a real date, you should be able to select that cell or entire column, hit Format-Cell, Number tab, and choose Date, and then any one of the date formats.

Julian dates are what numbered day of the year. For instance, January 3, 2002 would be 3.

Learn lots about dates and times in Excel:

http://www.cpearson.com/excel/datetime.htm

Be prepared to be there for a while.

Happy Thanksgiving!
 

2 more replies
Relevance 76.67%

I've just moved "My Documents" contents from one laptop to another
I now find that some of the Word Documents are showing the current date in letters to customers that were created & dated months ago
As these letters are records documents sent out is there a way of preventing them opening with the current date

I've already checked, Wotd - Insert - Date & Time & the Automatic Updates box is unchecked

Thanks for any help

Answer:In Word the Original Date in a letter changes to current date

Is this the file modified date or the file created date? Moving the file will give it a new "modified" date.

1 more replies
Relevance 76.67%

Hello. I have a cell on my spread sheet which calculates an earliest date due. The cell references other cells to achieve this and looks like this '=C51+(F8*7)' where cell C51 is a date field in the format DD/MM/CCYY and contains the date 26/12/2015. And cell F8 is a number field which contains the value '4'. This value '4' is indicating a number of weeks. So the calculation (F8*7) gets me the number of days and I then add those days to the date in cell C51 to get 23/01/2016.I want this cell to output the current date if the calculation above results in a date that is in the past. Can anyone tell me if there is a simple way to achieve this? Thank you.

Answer:Excel: Substitute a past date with the current date

If I understand you correctly, this should get you what you want:=IF("your calculation"< TODAY(),TODAY(),"your calculation")However, the TODAY() will update every day to always show the current date, assuming "your calculation" results in a date that is in the past.In other words, it will not lock in the first date it calculates. It will always display "today's" date.Is that what you want to see?One other issue: As explained at the link below, the TODAY() function is "volatile". That means that is will recalculate every time the sheet calculates, even if none of the arguments have changed. A large number of volatile functions can slow a worksheet down.https://msdn.microsoft.com/en-us/li...Volatile and Non-Volatile Functions

Excel supports the concept of a volatile function, that is,
one whose value cannot be assumed to be the same from one
moment to the next even if none of its arguments (if it
takes any) has changed. Excel reevaluates cells that contain
volatile functions, together with all dependents, every time
that it recalculates. For this reason, too much reliance on
volatile functions can make recalculation times slow. Use them
sparingly.

The following Excel functions are volatile:

NOW
TODAY
RAND
OFFSET
INDIRECT
INFO (depending on its arguments)
CELL (depending on its arguments)Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

4 more replies
Relevance 75.44%

Hi all!
Before I ask my question I just want to let everyone know that this site has been a great help.

So, I have a TextBox that needs to accept a date and time. Simple enough. However, the data that I need to collect has to always have a date and time but when I use General Date it will accept either Date or Time or both as its designed to do so.

I have tried setting

Format as " m/d/yyyy h:nn:ss ampm "
Input Mask as " 90/90/0000\ 99:00:00\ >LL;0;_ "

and tinkered with me.textbox.format() as an if statment

But this leads to the other issue that most of this data will be pasted into the form in either of the below formats.

7/19/2017 12:08:14 PM
Wednesday, July 19, 2017 12:08:14 PM

I'm stumped and haven't been able to figure this out through research or my own luck.

Any help is appreciated and thank you all.
 

Answer:General Date Forced To Have Date And Time

So.... I think I figured it out. Been testing it and it seems to result in the way i need it to. So I have the Form/Table set to Date/Time Field formatted as a General Date. This will at least validate that the information inputted in the text-box is a date/time of some sort. Then I added the below code to make it follow a validation rule of sort. So far it seems regardless of the way information is pasted in the end result is always MM/DD/YYYY HH:MM:SS AMPM
If Me.YourTextBox Like "**/**/**** **:**:** **" Then
Cancel = False
Else
MsgBox ("Please enter a date and time in this format MM/DD/YYYY HH:MM:SS AM/PM")
Cancel = True
End If
I'm still open to suggestions if there is a more efficient way of doing this. If not I hope this information will be found helpful to others.
Thanks All,
 

5 more replies
Relevance 75.44%

All --

Please help with this question about file data created VS date modifed in Windows 7.

Suppose a file is created at time1.

How come Windows7 reports "date created" as "time1" and "date modified" as "time2" where "time2" is a time earlier than time1?

See the attached file, "WindowsDateIssue201203061503.png", for an example.

Thanks.

-- Mark Kamoski
 

Answer:date-created VS date-modified on Windows 7

Good question, but it does not effect the performance of the computer.
An explanation could be the DLL file could be updated via a recent Windows update and it was last modified date was inherited from the previous file that has been overwritten.
 

2 more replies
Relevance 75.44%

In excel I am trying to compare a column of various dates against the current date (reported in one cell using the =today() function) and if the dates in the column is past today's date it will report "Late" in the adjacent row or if the date in the column is the same as the current date it will report "Due" in the adjacent row. "If/then" doesnt seem to work. I have thousands of columns of dates but simplied exampleCurrent Date = 04/21/2014Column A, Column B, Due Date, Status, 04/12/2014, Late04/21/2014, Due

Answer:Comparing a date in column against today's date

First, a posting tip...If you click on the blue line at the bottom of this post, you can read the instructions on how to post data in this forum so that the columns line up and your data is easier for us to read. It may take some trial and error via the Preview screen, as explained in the instructions, but it can be done. Second, you told us what you want if the date to be checked has past or is the same as TODAY(), but you didn't tell us what you want if the date is later than TODAY().I assumed you want a blank cell.

A B
1 =TODAY()
2 Due Date Status
3 4/12/2014 =IF(A3<$A$1,"Late",IF(A3=$A$1,"Due",""))
4 4/21/2014 =IF(A4<$A$1,"Late",IF(A4=$A$1,"Due","")) Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.message edited by DerbyDad03

3 more replies
Relevance 75.44%

Does anyone know how to convert a date entry from Unix format to Gregorian calendar format?

I have a long table with Unix values for date and want to plot a count of row entries within a certain date range...

Any ideas?
 

Answer:Excel: Unix date to gregorian date

Also... how do I count the number of occurrences of similar entries in a column... i.e.

1
1
1
2
2
3
3
3
3
4
4

I want to be able to count the number of occurrences of 1, then the number of occurrences of 2 etc etc
 

2 more replies
Relevance 75.44%

Help! This should be easy but I can't get it to work.

I have a report that must group by Trip# and sort by ascending activity date all of the various activities that took place on multiple days of the trip.
Further, the trip with the earliest date must come first regardless of the Trip#.
I've accomplished getting the earliest starting date trip first and grouping its detail with a unique string made up of the earliest date of each trip formatted to YYYYMMDD+Trip#. This prints a trip total and works fine.

But the daily activity for the trip is out of date sequence.
Adding a Date field to the 'Sorting and Grouping' insists on breaking on and printing a sub-total for each of the trips activity dates.
Without the sorting & grouping by date the trip records are out of sequence even though the data source query is sorted ascending by activity date.

(see attachments that show the above)

The only solution I can think of is to create a sub-report sorted by activity date.

Does anyone have any better ideas?

Jim Shannon
JES Computer Systems
Access Developer.
 

Answer:How sort by 2nd field (date) without grouping when date changes?

7 more replies
Relevance 72.57%

Hello,
On Windows Embedded Standard PosReady 7 64 bits, I try to find in the registry the values for :

 # install OS Date
 # install Updates Dates
 # Boot OS Date
Can you help me ?

Do I need to search at WMIC level ?

Regards,

More replies
Relevance 72.57%

Since installing Windows 10 - previously on Windows 7 - all dates in Excel have turned into the American date format i.e. previously 12/08/15 in a cell displayed as 12th August 2015. Now it displays correctly but the cell contents have changed, so, in previous example, the cell now contains 08/12/15. How can I put this right? I have gone into anything I could see re language and have ensured it is English (United Kingdom) but this hasn't made any difference.

Answer:Windows 10 has turned my British date format in Excel into the American date format. How can I get it to turn back?

Freeeeeeeeeeeeedom!

10 more replies
Relevance 72.57%

I noticed that the "date modified" on the recovery file in the Recovery d: drive is the date I last had problems and did a recovery install.  Is this field supposed to update to the date of last recovery?  I am just wondering whether that date modified might indicate that it was modified with virus/malware so that recovering would not result in a clean install.  Thank you!

More replies
Relevance 72.57%

I am frustrated with the following problem.
I need to convert the date to US formatting.
I receive a file in .csv format and the dates come as text and a normal date format all within the same column.

Example:

12/4/2012 23:16
12/4/2012 23:21
13/04/12 12:04 AM
13/04/12 12:52 AM
13/04/12 3:20 AM

The top 2, Excel reads as date. The bottom 3 excel reads as text...I need the bottom 3 to read as date.

Please HelP!!!
 

Answer:Excel 2010 UK Date to US Date

11 more replies
Relevance 72.57%

Hello allIs there anyway that I can type in a date like: 010199 and it then gets recognized as a date format and displays it as 01-01-1999 ?I can do it the other way around, if I type 01-01-1999 and have modified the date format to be ddmmyy, it works, but somehow it doesnt work the other way around.Any ideas for this? I know it is possible to make it happen by using another column and the number 010199 then gets converted to 01-01-1999, but I need this to be done automaticly (and with no macros)Thanks in advance/Jacob

Answer:Date format when typing the date?

Where are you typing this address - presumably in an Excel column?

6 more replies
Relevance 72.57%

This happens to the Winodws XP Explorer.

Would people out there please explain it to me. And also what I wish to see is the downloaded file creation date which should be identical to the one kept by the hosting web site. Or maybe other ways around

Answer:Why can Last Modified Date and Creation Date be the same

If I understand what your asking:


Quote:




Why can Last Modified Date and Creation Date be the same




They would be the same, for example. You draw a picture in paint, save it and dont edit it again. When you save it you create the file, and seeing you dont edit it the modfication date and the creation date will be the same.


Quote:




And also what I wish to see is the downloaded file creation date which should be identical to the one kept by the hosting web site.




I am not sure if that is possible.

1 more replies
Relevance 72.57%

Date plus days - how do I get a date answer? Date of arrival, plus the number of days needed to be there, I'm trying to get the formula for ending up with a date of departure.

Answer:Date plus days - how do I get a date answer?

With 12/01/2011 in A1, and 5 in B1, this formula in C1 will return 12/06/2011:=A1+B1Is that not what you get?Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

3 more replies
Relevance 72.57%

In Win Explorer why do some files show that they were modified before they were creatted. B....y confusing!

Answer:Date Created - Date Modified

It could well be because yoour "view" settings are set that way. go to view, arrange icons by. and see.

10 more replies
Relevance 72.57%

I set a restore date, and now it won't let me go there because it only goes back a month. I am constantly having to set the computer back, certain files just disappear if I don't go back in time.
 

Answer:I need to set restore date to an earlier date than it will let me.

Then you've got some sort of problem with your system. You shouldn't have to be doing that. I've had to do a system restore maybe twice in the last 10 years.
 

1 more replies
Relevance 72.57%

Is there a programme/add on that will display the date down by the clock in the System Tray?As I get older I find myself increasingly unaware not just of the hour but even the day!

Answer:Date on Screen (No, not that sort of date!)

Try unlocking the toolbar and raise it a bit. The clock will now show the time, day and date. Lock the toolbar.

10 more replies
Relevance 72.57%

Hello.

I am trying to set my laptop date to a past date for the purposes of data entry into a program that requires that i back date my laptop. My problem is that even after i backdate it by entering a particular past date, when i restart my laptop it reverts back to the current date. having to reset the dates each time after the laptop is switched on is a pain. Isnt there a way I can permanently keep my date in the past?

::I had thought of unchecking the synchronize with internet time server checkbox but for some reason my internet time tab is missing from the date and time pop up box.

How can I go about achieving this?
 

Answer:How do i back date my laptop date

7 more replies
Relevance 72.16%

Pun.
Just curious... Why not: "Date & Time Modified"? Whatever happened to Time? It flew by so quick...

More replies
Relevance 72.16%

Hi There

I can't seem to get this line of macro to work properly

If ActiveCell<=Range("C4") then......(Some lines get deleted)

Both the active cell and Range("C4") have dates in them. This line of code does not work properly. It does't matter if the date in the Active Cell is greater than the date in Range("C4"), the macro still executes the next lines of code and still deletes lines that it should not delete.

What am I doing wrong??

Mario
 

Answer:Solved: Date: VBA - One date less than another date

This would happen if either or both of the cells being evaluated are not dates or if the ActiveCell is blank. Try this test to see if this is the case; in either case you should use the DateValue function when evaluating ActiveCell vs C4. This is because the VBA interpretation of a date is much more forgiving than the Excel interpretation. VBA will interpret anything that looks like a date as a date e.g. " 12/21/2013" (with the leading spaces) will be interpreted by Excel as text whilst VBA will recognise it as a date.

Code:
Sub test()
If IsDate(ActiveCell) = False Then
MsgBox (ActiveCell.Address & " is not a Date")
ElseIf IsDate(Range("C4")) = False Then
MsgBox ("Cell C4 is not a Date")
Else
If DateValue(ActiveCell) <= DateValue(Range("C4")) Then [B] [COLOR=red]'use this in your macro[/COLOR][/B]
MsgBox ("OK")
End If
End If
End Sub
 

2 more replies
Relevance 72.16%

HI 
Please someone guide for this Powershell script for the above question.For wintel 2012/r2 server.
Thank you

More replies
Relevance 71.34%

I want to know an exel formual for the following - Any help would be great

Date Range
01/12/2013 - 03/14/2013

How many days from the date range 01/22/2013 - 02/21/2013 are in the above date range

So answer for the above would be 31

Thank you for your help!
 

Answer:Excel 2010 - Count # Of Days In A Date Range That Are Part of Another Date Range

Hi LucianC - try entering this info:
Start Date in A1
End Date in B1
=DateDif(A1,B1, "D") in C1
 

2 more replies
Relevance 70.11%

Can anyone help me please.
I want to create a batch file that will display both the date modified and date created of some folders including its subfolders and files and output the result to a txt file.
This is what I made but it does not show both the date modified and date created.

@echo off

rem echo. ------------------------ DATE CREATED & DATE MODIFIED------------------------ >> "C:\Documents and Settings\administrator\Desktop\dir.txt"

dir /t:c /t:w /s /q "C:\Documents and Settings\administrator\Desktop\fileinfo_test" >> "C:\Documents and Settings\administrator\Desktop\dir.txt"
pause
exit/b


can somebody help me please.
thank you very much in advance..

mhel
 

More replies
Relevance 70.11%

mY OFFICE FILES : DOC, XLS, PPT, PDF, JPEG ARE ARE CORRUPTED SUDDENLY.

WHEN I JUST LOOK AT THEM ALL THE FILES HAVE SAME MODIFIED DATE AND TIME, THAT FILES ARE NOT OPENED AND CORRUPTED

ALL OTHER DATE FILES ARE OPENING WITHOUT ANY PROBLEM. I TRIED MORE DATA RECOVERY SOFTWARE, BUT NO RECOVERY POSSIBLE.

MY DATAS ARE VERY IMPORTANT, HOW TO RECOVER THIS, PLS HELP

More replies
Relevance 70.11%

I think what happened. Sunday night began a manual backup by trying to select entire My Docs and copy to laptop DVD R/W drive disk. Computer said it would take 2 days so 35 mins in I cancelled. It said there was a large set of temp files and I could retain or remove, I removed.

Went to bed.

Next day 11:04 am ran a malware prgm called CacheCleaner. Have run it 1000+ times and no issue this time.

Few days later go to access Quicken - no can do. File is damaged. Went to open my budget file in excel, says" file is in a different format than specified by the file extension. ..." Open it anyways, its completely empty. Go to open a MS word doc, cannot open,says there are problems with the contents. PDF problems too.

Every file has been mysteriously updated Date Modified to 1/4/2010 11:04am. None will open. Any file not dated 1/4/2010 11:04am opens fine.

Was there some temp pointer type file created during my aborted backup operation that was then deleted when I emptied my temp files etc when I ran Cache Cleaner.
This is horribly impactful b/c my last backup is old. Please help if you can.....
Thanks
T

More replies
Relevance 70.11%

I need help writing VBA code in Excel to do the following:Current data is in three columns Can have more than one rows per date Date Gallons Location 11/1/11 100 A 11/1/11 50 C 11/2/11 75 C 11/5/11 30 A 11/6/11 110 B 11/6/11 40 C 11/7/11 50 A 11/8/11 20 A 11/8/11 80 B Need VBA code to move data to: One row per date and gallons moved to corresponding Location columns Date Gallons Location A Gallons Location B Gallons Location C11/1/11 100 5011/2/11 7511/5/11 30 11/6/11 110 11/7/11 50 11/8/11 20 80

Answer:VBA code to move multiple date list to single date list

Do you need help writing the code or do you need someone to write the code for you?In other words, have you tried anything? Post it if you have, after reading the blue line at the end of this post.We'll see what help we can offer.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

2 more replies
Relevance 70.11%

Have set the correct time zone, set the date and time, and within half an hour, the time jumps ahead significantly. Time then continues jumping periodically, and date as well. Any patch available for this?
Thanks.

Answer:Date/Time jumps after correct setting of date/time/timezone?

Welcome to the Seven Forums

Perhaps a change of cmos battery is needed. What is happening is a sign of the battery having packed up.

2 more replies
Relevance 69.7%

I logged on today and the AVG was out of date. I tried to update it and got an error message at the end - unable to connect, check internet settings.I am not techie at all and don't know what to do.Any advice? (In very simple terms, please!)

Answer:AVG out of date and won't update

OK just a few questions , What Operating system are you using? eg. XP home or Win ME etc Also Are you using Zone Alarm or another FireWall eg the XP inbuilt firewall?Pavel

6 more replies
Relevance 69.29%

This should be simple enough . . .

I have a column of numbers that I would like to increase in value by 1 every Sept. 1. I could easily cut and paste or find and replace on Sept. 1, but I'd prefer to use a formula so that the update is done automatically. Any ideas?
 

Answer:Excel: update value by date

9 more replies
Relevance 69.29%

How do i get the drivers and which ones do i update

Answer:How do I update out of date drivers

If all is working well then done update drivers. If you are a gamer with a gaming graphics card then you could try a newer driver. Most cards are either based on ATI or nVidia GPUs. You get those drivers from the respective GPU manufacturer. http://support.amd.com/us/gpudownlo...http://www.nvidia.com/Download/Scan...All other drivers come from the manufacturer of the hardware. integrated drivers come from the manufacturer of the motherboard or if a pre-built system then the OEM like Dell, etc.

3 more replies
Relevance 69.29%

This thing started appearing a few days ago. I don't trust it. It appears when I reboot, and I also see it in the morning after the PC has been idle. (I don't shut it down at night, I log off everything and just the monitor goes to sleep.)
I don't tell it to update anything, I click the X and it goes away for a while. There's also a quick-launch button on the far right that appears to be associated with it. (See screen capture 1).

1. I don't use IE, I use Chrome, but I keep IE installed for trouble-shooting purposes, e.g. to see if a problem is browser specific. I have IE set for automatic updates. (Screen capture 2).

2. I ran Spybot when I first spotted this, it found nothing to be alarmed about. Avira runs every night also, no warnings there either.

3. I've checked the official Microsoft site, it says my version of IE is NOT out of date. (Screen capture 3).

4. I found the program that appears to be the one displaying this message in the list of programs (UpdateAdmin). My first instinct was to uninstall it, but I want to make sure it's not something I need. (Screen capture 4).

So what is this thing? Can I safely uninstall it?

Answer:Icon saying I need to update IE, but it's not out of date

Hi,

Could be malware or it could be one of those 'optional' extras you forgot to untick. Lets see what we can find out about it.

Please download SystemLook from one of the links below and save it to your Desktop.

Download Mirror #1
Download Mirror #2
Double-click SystemLook.exe to run it.
Copy the contents of the following codebox into the main textfield:


Code:
:folderfind
*UpdateAdmin*

Click the Look button to start the scan.
When finished, a notepad window will open with the results of the scan. Please post this log in your next reply.
Note: The log can also be found on your Desktop entitled SystemLook.txt

I have to go out for a couple of hours but will have a look when I get back.

6 more replies
Relevance 69.29%

So i recently build my brother a PC for Christmas and i have installed windows 7 pro on it. its working fine and dandy however when i try to run the next lot of windows updates it tells me that i am up to date, when i know that I'm not. I have run 3 round of windows update and installed something close to 300 updates and not one has failed but when i try to update the next lot it wont let me. I know that i need to update from previous experience and it is still in the original UI from early service pack 1 (it changes slightly with one of the updates) which allows the task bar to be colour customisable. I have run the trouble shooter and everything was fixed and the only error I got was the 0x80070005 error. But i still can't update. Anyone know what it going on here? I've also ran the update readiness tool, and reset the windows update components which didn't work either.
I will attach my SUR log

Answer:Windows update says I'm up to date. But I'm not.

Hi TomXD1 & welcome to sevenforums.

Are you receiving any error code?

Please post WindowsUpdate.log located at: C:\Windows

2 more replies
Relevance 69.29%

Release date

Answer:What is WP 8.1 update 2 release date?

Well there hasn't been a fixed release date of official wp8.1 gdr 1 & you are expecting gdr 2?

2 more replies
Relevance 69.29%

I have three servers, all running Symantec Antivirus Corporate Edition vs. 8.1. They all have Windows Server 2003. Two of them are working fine however, one of them is not updating when I run live update. I run live update manually every morning. Although, the server appears to be updating the date of the virus definition files is still displaying 11/10/04. Also when I go into Symantec Center Console and select the server in question no clients show up in the right window pane. I used to have approximately five users. I have ran full system scans through norton, and have also done scans from both trendmicro.com and pandasoftware.com. However, no viruses are found. I ran hijack this and here is the log. I am running out of ideas Any help is greatly apprecited

Logfile of HijackThis v1.98.2
Scan saved at 9:27:07 AM, on 11/30/2004
Platform: Unknown Windows (WinNT 5.02.3790)
MSIE: Internet Explorer v6.00 (6.00.3790.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\SAV\DefWatch.exe
C:\WINDOWS\system32\Dfssvc.exe
C:\WINDOWS\System32\dns.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\cba\pds.exe
C:\WINDOWS\System32\ismserv.exe
C:\Program Files\Dell\OpenManage\Array Manager\mr2kserv.exe
C:\PROGRA~1\SAV\Rtvscan.exe
C:\WINDOWS\system32\ntfr... Read more

More replies
Relevance 69.29%

Can someone please tell me why the latest Nvidia drivers from Windows Update are for Dec. 2007, nearly 12 months old!?

(I have Vista Home Premium x64 and 8800 GTX)

Answer:Nvidia update out of date?

Just download from nvidia's website.

10 more replies