Computer Support Forum

Open DNS typo on router

Question: Open DNS typo on router

Hi can someone please help clear up my concerns because I accidentally interned the wrong DNS address on my new router.
After entering this typo I almost immediately that my connection was unstable especially on Linux and yesterday evening when I logged back into my router the DNS settings were set to there defaults. But I was able to surf the web kinda in Windows though it timed out often and certain webpages wouldn't even open, and now when ever I enter the correct DNS settings it disconnects from the internet.  
 
Here's what I entered
 
222.67.222.222
220.67.220.220
 
Instead of
 
208.67.222.222
208.67.220.220
 
I'm really feeling uneasy and stressed about this, any advice?
 
 
 
Why does stuff like this happen whenever your in poor health or any other of life's trials and complications?

Relevance 100%
Preferred Solution: Open DNS typo on router

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Open DNS typo on router

Two things you might check:
 
1. In Windows, do your Network Properties have a DNS Server entry(s) that point(s) to your router (probably 192.168.1.1 or close) or do they point to the published OpenDNS IP addresses? Easy check: From an Elevated Command Prompt: ipconfig /all
 
2. After you corrected the DNS router entries, did you have the router do a cold reboot?
 
I believe you shouldn't overly stress yourself over this if you didn't make any financial transactions. But new passwords could be needed.

6 more replies
Relevance 61.09%

When I first open Google, in the Search Box is a typo which I cannot delete.Any ideas? Many thanks. pianojoe
 

Answer:Solved: how to delete typo which remains in Google search box when I first open Googl

6 more replies
Relevance 46.74%
Question: typo

For my typo read "explanatory". What am I up to?

Answer:typo

..

3 more replies
Relevance 46.74%
Question: Is this a typo?

the help infomation about bitlocker on windows 7 ultimate, i found this while reading through it, correct me if im wrong but its meant to be you right?

Answer:Is this a typo?

  
Quote: Originally Posted by F1FAN


the help infomation about bitlocker on windows 7 ultimate, i found this while reading through it, correct me if im wrong but its meant to be you right?


You have found one

1 more replies
Relevance 46.33%
Question: Typo error

Sorry.... 22%

More replies
Relevance 46.33%

A few people have commented on the typing / grammar used in the forum, just for a bit of fun I thought you might like to read this:Aoccdrnig to a rscheearch at an Elingsh uinervtisy, it deosn't mttaer in > > waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht > > frist and lsat ltteer is at the rghit pclae. The rset can be a toatl mses > > and you can sitll raed it wouthit porbelm. Tihs is bcuseae we do not raed > > ervey lteter by it slef but the wrod as a wlohe

Answer:On the subject of typo's

looks normal to me:-)

10 more replies
Relevance 46.33%
Question: Password Typo

I only have 1 password for all my docs but I have 4 of them which I can't open. Propably a typo when I saved these docs.

They are in OpenOffice writer format

Anyway for a back door?

Thanks
 

Answer:Password Typo

Please refer to the forum rules. We cannot assisst with password issues so I have to close this thread.

Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.
 

1 more replies
Relevance 46.33%

I mistyped a url earlier (I believe i typed 'radiosahck' instead of radioshack) and was redirected to a strange website (something about internet surveys I believe) I closed it right away and did a quick scan with malwarebytes to make sure nothing was wrong, and it came up empty. I'm probably being a bit paranoid here, but is this anything to really worry about?

Answer:Odd URL typo redirect...

Redirects can be something to worry about, as you have no idea what content is being hosted on the re-direct. Most popular anti virus programs, have real-time scanning, where it's constantly scanning your computer, and as soon as you're redirected to a bad website, it will block any content that's harmful to your computer. I use Eset and it does this.

1 more replies
Relevance 46.33%
Question: Microsoft Typo

Microsoft made a typo in their WinSAT application, How can we let them know about it?

Answer:Microsoft Typo

Hi Steven,

You can try contacting them by following the link below. Whether or not you will get a response I cannot say. I have managed to locate the error in the 'WinSAT.exe' file (notice the space between the letters), and you can edit it to replace the erroneous 'o' with an 'i', however by doing so you will probably cause it to fail an SFC scan. In my opinion, it is such a minor error that it is probably best left ignored.
Dwarf




https://support.microsoft.com/contac...&WS=aufeedback

6 more replies
Relevance 46.33%

Okay helping a friend via long distance phone calls and the random email. This is the only info I have, if someone could shed some light on this and help, we both would appreciate it. Here is the email she was able to send:

"Still messing with that damn trojan. AVG sees it and asks the usual, delete, heal, or move to vault. No matter how many times I choose delete, or heal or even move, it comes back again and again. This is what was causing my IE to try and dial out (at least, that's what I get from looking online for info on this damned thing) and share my info with the hacker. Avast does not seem to see...this file. It is saving itself (and apparently restoring itself) in my Windows folder as a dll file. prntsvr.dll to be exact.

The name AVG gives is PSW.Dumarin.C. The last thing I tried was to turn my
system restore off, delete the file and re-start... but guess what? lol, Yep, it is still there. *sigh* Why do people have to make these things???"

------------end of message--------------
Looking around for info I found only ONE place (so far) that had any info about it, and that is assuming she misspelled the name of the thing...

Name: [email protected]
Aliases: W32.Dumaru.B/C | [email protected] | W32/Dumaru-B

I think she mis-spelled the name, because Google found nothing about her original file name..

I found info here: http://www.bitdefender.com/bd/site/virusinfo.php?menu_id=1&v_id=160

And a free removal tool here, which I've... Read more

Answer:PSW.Dumarin.C (possible typo)

16 more replies
Relevance 45.92%
Question: typo on home page

The current Maxthon is 3.1.4.1000
You have 3.1.3.xxxx
just ab fyi. the download is right 314. just not the home page listing.:wave
 

More replies
Relevance 45.92%

Hello everyone,

I am experiencing the red typo lines when there are no typos. This happens on occasion when I'm typing emails and posting or responding to forums. It seems to occur when there is an actually typo and I correct the error. After that the entire post/email from that point on will have the red typo lines.

For example it is happening now... I'll try to post a pic for a better understanding.

Has anyone experience this as well and most importantly does anyone know of a solutions to this?

My unit is new and I have yet to DL Office 365 so I don't have Word. Not sure if that will matter.

Any input is greatly appreciated. Thanks

Answer:Red typo lines when no typos

Language settings?

8 more replies
Relevance 45.92%

Is there any way I can report this?

This is just my first post and I'm tryna help out a bit

Answer:I just found a typo in Windows 10 TP

skippr said:

Is there any way I can report this?

This is just my first post and I'm tryna help out a bit



Hey skippr, welcome to TenForums!
Try the Feedback App.
What'd ya find?

11 more replies
Relevance 45.92%

So I was browsing around in Windows Defender (Windows Settings > Update & Security > Windows Defender > Open Windows Defender Security Center > Virus & threat protection > Virus & threat protection settings, then scroll down to Controlled folder access.)

The sentence "Protect your files and folders from unauthorized changed by unfriendly applications" has a typo in it.
(Refer to the attached picture)

Either:
? The word "changed" has a typo in it and should be the word "changes" (with an 's' instead of a 'd'), or
? There is at least one missing word in between the words "unauthorized" & "changed"
Somebody should inform Microsoft about this typo.

But Also: I noticed that this is a new option, since the last time I was browsing around in there. What does this option exactly do? It was originally off, but I turned it On. Yet I must say that I have seen a few messages pop up in the right corner of the screen, stating that Windows Defender blocked some programs from making changes. One of them showed explorer.exe from modifying the Favorites folder without me doing anything with Favorites. Exactly what does this option do? Is it kind of like some sort of strict "Firewall"? Because if so, then I like that.

Answer:HAH, I Found A Typo In Windows!

Originally Posted by pepanee


The sentence "Protect your files and folders from unauthorized changed by unfriendly applications" has a typo in it. ...



Mine says 'unauthorised' (but then it should in the UK) - still has the typo though






But Also: I noticed that this is a new option, since the last time I was browsing around in there. What does this option exactly do?



Blocks access to your files and documents by unknown apps (malware/ransomware). It's off by default because not all 'good' apps are in it's 'trusted' list. It takes a bit of fiddling to get all your apps to work after you turn it on.

Change Windows Defender Controlled Folder Access Settings - Windows 10

4 more replies
Relevance 45.92%
Question: Typo in Event 8003

Apparently, this bug (typo) was not fixed for several years!!! Still it read "bowser" instead of "browser". I see this in 64-bit Windows 7/Computer Management/Event Viewer/Windows Logs/SystemLevel "Error", Source "bowser", General "Log Name:      SystemSource:        bowserDate:          3/11/2010 2:07:25 PMEvent ID:      8003Task Category: NoneLevel:         ErrorKeywords:      ClassicUser:          N/AComputer:      NORMAN-CPDescription:The master browser has received a server announcement from the computer MEDIACENTER that believes that it is the master browser for the domain on transport NetBT_Tcpip_{7D3A7E95-23A7-42BA-B071-81703C4348F5}. The master browser is stopping or an election is being forced.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="bowser" />    <EventID Qualifiers="49152">8003</EventID>    <Level>2</Level>    <Task>0</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2010-... Read more

Answer:Typo in Event 8003

Hi,I think the following website explains the story:http://blogs.msdn.com/larryosterman/archive/2006/03/14/551368.aspx

3 more replies
Relevance 45.92%

OneDrive has over 7x that amount buy giving everyone that uses it 15GB.

More replies
Relevance 45.92%

I was trying out a freeware security suite and i encountered this typo that might make you laugh or not
 

Answer:security suite typo

Looks like an application I would have been involved with judging by the typo! dependant on where the app was developed it depends on the native language and who translated it possibily as I noticed many strange word in manuals translated to engwish over the years.

BTW what is the app you trying "swift"???
 

5 more replies
Relevance 45.1%

Hi,

I am having a problem when i misspell URLs.

When i type things like google.con instead of .com, i am redirected to a host of different search sites, including searchathand.com, and daplaces.com. I am pretty sure i must be infected with something, but i have ran several online and offline spyware and malware scanners and nothing seems to find a problem.

I am running Firefox version 1.5.0.6, but the problem also occurs in IE as well.

Advise please!

Cheers

Joel

Edit: I seem to have found what i think is the culprit for this...but this leads to another problem.

There is a HJT entry stating
O17 - HKLM\System\CCS\Services\Tcpip\..\{A2EA3617-0DD4-4C7B-89EC-1F1FB24D96E1}: NameServer = 85.255.114.7 85.255.112.174

I have removed this on a couple of occasions and it only returns a few minutes later.

Help please!!!
 

Answer:Solved: Typo browser hijacks

16 more replies
Relevance 45.1%

I have a Dell XS 15z Laptop
I am getting a windows 10 Recovery Message ( your PC couldn't start correctly )
I am attemting to create and use a recovery USB using the link below.
https://www.dell.com/support/article/us/en/19/sln298442/how-to-create-and-use-the-dell-recovery--restore-usb-drive?lang=en
Everything seems to work except I don't have the "Secure Boot" option in my Bios.
Anytime I try to boot the USB I get the message:
Operation System not found

Please advise.

Answer:Operation System Not Found ( not a typo )

Are you creating the recovery USB on a different PC?
I hope so.

1 more replies
Relevance 45.1%

I'm just setting up a new computer, and not used to the keyboard. When I was installing the operating system I was asked for a User name. Before I had a chance to do anything it had accepted the name GREU and moved on to the next step. No back button! Bloody i7's, so fast!

I've tried doing a search in regedit for GREU, changed it in one place, but its still showing up all over. Is there a complete fix to this or should I resign myself to being known as Greu for the next few years?
 

Answer:Typo when entering user name - I'm now Greu!

6 more replies
Relevance 45.1%

for your information:

Spyware authors and phishing fraudsters yanked an old scam out of the playbook Wednesday by directing malicious code at Internet users who may be prone to typing or spelling deficiencies, according to security researchers.

Finnish security firm F-Secure said they discovered an attack aimed at Web surfers attempting to land on Google's (Quote, Chart) homepage, but who may have mistyped the Web address.

Internet users who punch in "Googkle.com" are treated to a host malicious code, as the computer gets slammed with a heap of the unwanted software that is automatically downloaded and installed. The malware includes: Trojan droppers, Trojan downloaders, backdoors, a proxy Trojan and a spying Trojan. A few adware-related files are also installed, the firm said.

Google Typo Crashes Systems
 

More replies
Relevance 45.1%

Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help

Answer:TYPO I meant CTL.DLL ERROR BSOD

  
Quote: Originally Posted by etanas


Just got a news system built and am getting a CTL.dll error whenever I turn on my HDMI display ...not sure what is doing it.... I have attached the dump file as a zip..help is greatly appreciated.

Windows 7 64 bit Ultimate retail
All new hardware
OS build Service Pack 1 less than a month

I have attached my dump file and the system file checker results and any help is appreciatted... one thing to note is the system file checker results I get a
Could not reproject corrupted file [ml:60{30},l:58{29}]"\??\C:\Windows\SysWOW64\en-US"\[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted


Thank you for your help


Memory corruption caused by an unknown driver. Please run memtest and driver verifier.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.





Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup ... Read more

8 more replies
Relevance 45.1%

I installed Adobe 8 and now all of my Desktop icons have the Adobe logo and will only open up Adobe, not my usual shortcuts, like word, excel, games etc...I tried uninstalling Adobe, which fixed the problem, but when I re-installed it came back again. I don't knw how to fix this...I'm new to all this! I'm running windows vista Help!
 

Answer:Adobe error {fixed typo}

I'm not sure why that is happening but you can try and fix the icons by right clicking on the programs that are displaying the incorrect icons, select properties>change Icon and find the correct one
 

3 more replies
Relevance 45.1%

I think this is a virus behavior. Recently whenever I type in microsoft waord or notepad or fill up webforms in IE, the cursor jumps anywhere in the previous sentences, or highlights the last some letters somewhere and the entire type goes haywaire. Now Also this is getting typed anywhere and I have to delete, retype. very painful. I have Norton antivirus 2005, zerospyware (after reading the latest article in your mag only), adware, spybot and zone alarm, all fully updated. and none have been able to pick up a virus/spyware after a thorough system scan. I am going crazy typing, especially when i am prescribing medicines to my patients. I don't want to reload windows and all my applications again.Pl HelpDr Alok Modi MD

Answer:Typo errors due to cursor jumping

Go into Device Manager and uninstall your Mouse then restart computer

10 more replies
Relevance 45.1%

Purchased a new laptop and skipped making the MS email but created a password for my account.When I booted up my pc later on I was greeted with an incorrect password message. I must have made a typo in the pw set up because it does not work.I also didnt create a recovery disk because I had literally only used it for 30 mins before turning it off and this problem was the last thing I ever expected to happen.There is only one account and it's the one that is locked. A to rendered a $600 purchase obsolete until I can fix it.All help is appreciated.

More replies
Relevance 45.1%

Hi... I wasn't exactly sure where to post this, I'm posting it both here and in the linux forum

I accidentally made an ext2 filesystem (mke2fs) on top of my pre-existing Windows XP partition (accidentally typed /dev/sdb1 instead of /dev/sda1)... so now it won't boot, and I can't seem to mount it on any OS. Anyone have any ideas on how data on it could be recovered, or if there's any way to get it working again as-is?

Answer:ext2 + typo = dead WinXP

Pull the drive and put it into an External USB Enclosure/Adpater. Mount it on a working computer and copy the files you want.

2 more replies
Relevance 45.1%

NAME: Googkle
ALIAS: Googkle.com

Summary


F-Secure staff has found a malicious website that utilizes a spelling error when typing the name of the popular search engine - 'Google.com'. If a user opens a malicious website, his/her computer gets hijacked - a lot of different malware gets automatically downloaded and installed: trojan droppers, trojan downloaders, backdoors, a proxy trojan and a spying trojan. Also a few adware-related files are installed.

The name of the malicious website is 'Googkle.com'. PLEASE DO NOT GO TO THIS WEBSITE! Otherwise your computer will get infected! We have reported the case to the authorities.

Detailed Description


Our investigation revealed that the whole infection starts from the 'googkle.com' website. This website, as well as a few related websites are owned by people with Russian names. Also several malicious files that are downloaded from these websites have Russian texts.

When the 'googkle.com' is opened in a browser, it shows 2 popup windows that are linked to the following websites:


www ntsearch.com
toolbarpartner.com

The 'ntsearch.com' website downloads and runs the 'pop.chm' file and the 'toolbarpartner.com' website downloads and runs the 'ddfs.chm' file. Both files are downloaded using exploits and they contain exploits themselves to run embedded executable files. One of the webpages of the 'toolbarpartner.com... Read more

More replies
Relevance 45.1%

My correct email address is logged with my Microsoft account, but typo is showing on my windows phone Microsoft account under email+accounts, message says attention required.  Click on message tried to correct using 'fix it here' then get message
There's a temporary problem, getting this message for 2 days now.  Help

More replies
Relevance 44.69%

Heads up about a string of blogs using familiar names like FileHippo and Softpedia in their URL, when searching for software downloads. I cannot guarantee their legitimacy, or safety to visit or download from these rip-off blogs.

Searching "avast 2017" in Google Search Engine crops up with many blogs using SEO techniques to distract users from the real FileHippo and Softpedia sites.



oFileHippo



downFileHippo



theFileHippo



eSoftpedia



Happy Safe Browsing!
 

Answer:Typo Squatting - Fake FileHippo, Softpedia and more!

Download links seem legit.. I love the tactic by the way.
I will take o-malwaretips.net lol
 

0 more replies
Relevance 44.28%

Hello, is some one know where finding free Helvetica and Time family typo ?
thank Kidkodak 57

Answer:Finding free Helvetica and Time family typo

Helvetica Fonts - DownloadFontsFree.Net
Regarding "Time family", you need to be more specific.

2 more replies
Relevance 44.28%

Is there a way to tell Microsoft Word to "guess" what I mean every time I make a typo? For example, I type "tsanding," and instead of changing it to "standing," it underlines it red. I know I can then right-click it, and select AutoCorrect > standing, so that, from now on, if the same exact typo arises in the future, in which I accidentally type "tsanding," it'll change it to "standing." I've thus far collected *hundreds* of specific typo corrections in this way. But that's very time-consuming, and is only a weak attempt at preventing typos I may be likely to make in the future (based on the fact that I made the exact typo at least once before). Is there any way to establish that I want Microsoft Word to go ahead and correct every single "underlined red" occurrence from now on, based on its best guess as to what I meant? (except in cases where the typo was so bad that it has no guess at all) That way, when it corrects something I *didn't* want corrected, I can then go back and add what I wanted to its dictionary, to tell it not to consider that word an accident from then on.

Answer:Is there a way to tell Microsoft Word to "guess" what I mean every time I make a typo?

Found this in the Word Help files. On the Tools menu, click AutoCorrect Options. In the Replace box, type a word or phrase that you often mistype or misspell ? for example, type usualy. In the With box, type the correct spelling of the word ? for example, type usually. Click Add. Is this what you're talking about?

2 more replies
Relevance 43.87%

So I decided to buy Windows 7 from eBay. I didn't trust the people selling product keys only, so I purchased a brand new retail package. When I shop on eBay, I always look for sellers that are really close to me so shipping is fast. So I found a seller, said to be located in Maryland (which is two states away from me), with a great price and great feedback for his W7 sells. I was pissed because when the guy sent me the tracking number, I found out that the item was coming from Beijing, China, not Maryland! But I figured, well at least he shipped it.

THEN, I get an email from eBay saying the listing for the item I just purchased because the copyright holder reported that the item may be a counterfeit. At first I was pissed at eBay because now I had to record of the transaction in my eBay account and could not contact the seller directly from within the item invoice, since eBay deleted. Plus, he had several other sells of this same item, all with positive feedback of the W7 package, and eBay did not remove the listings for them. So I was like, why me? Luckily, I had his email from paypal and contacted him. He assured me that he is the legal owner of the item and that he sent proof to eBay saying so. Still never got my records back.

Anyway, this prompted me to search counterfeit Windows 7 retail packages. I found some interesting info, but my package doesn't fit any of the counterfeit profiles Microsoft says to look out for. The top hologram is built onto the ... Read more

Answer:My Windows 7 copy looks fake. Typo on back cover. Came from China.

Have you tried contacting ebay?:

eBay Buyer Protection

James

9 more replies
Relevance 43.05%

So I decided to buy Windows 7 from eBay. I didn't trust the people selling product keys only, so I purchased a brand new retail package. When I shop on eBay, I always look for sellers that are really close to me so shipping is fast. So I found a seller, said to be located in Maryland (which is two states away from me), with a great price and great feedback for his W7 sells. I was pissed because when the guy sent me the tracking number, I found out that the item was coming from Beijing, China, not Maryland! But I figured, well at least he shipped it.

THEN, I get an email from eBay saying the listing for the item I just purchased because the copyright holder reported that the item may be a counterfeit. At first I was pissed at eBay because now I had to record of the transaction in my eBay account and could not contact the seller directly from within the item invoice, since eBay deleted. Plus, he had several other sells of this same item, all with positive feedback of the W7 package, and eBay did not remove the listings for them. So I was like, why me? Luckily, I had his email from paypal and contacted him. He assured me that he is the legal owner of the item and that he sent proof to eBay saying so. Still never got my records back.

Anyway, this prompted me to search counterfeit Windows 7 retail packages. I found some interesting info, but my package doesn't fit any of the counterfeit profiles Microsoft says to look out for. The top hologram is built onto the cds, no... Read more

Answer:My Windows 7 copy looks counterfeit. Typo on back cover. Came from China (eBay). Pics

It's fake, that's pretty obvious. The hologram thing is most likely a sticker on top of the actual disc surface - you can use a fingernail or razor blade at the very edge and lift it up a bit, that's 100% proof. The part numbers don't seem to match up with the actual Windows 7 Ultimate part number, and it just has a fake quality all the way around.

If you contact Microsoft, show them the pics, explain where you bought it from and your situation, there is a small - small but it exists - chance they'll provide you with a key just for making the report and identifying the seller you got it from.

No guarantees, but at the moment you're better off reporting it to them and going from there. Sure can't hurt to let them know, either way.

I'd report it, personally, without even really thinking about it. It just SCREAMS fake.
 

38 more replies
Relevance 39.36%
Question: Open DNS in router

All,
I am trying to use open dns. OpenDNS | Internet Navigation And Security

I decided to put the open dns ip's in my router so that when anyone uses my network they will get the open dns ip's instead of my isp dns derver ip's.

All of my pc's (2 xp home, 1 win 7 homeprem) are set up as dhcp clients.

My problem is that the win 7 box is still getting the isp dns ip's. The 2 xp's are getting the new opendns ip's.

Win 7, I have rebooted, disabled adapter/reenabled adapter, disabled ipv6....

Any ideas?

Answer:Open DNS in router

hi.....these might be of help....
OpenDNS Community > Forums > OpenDNS on windows 7 beta build 7000
OpenDNS Community > Forums > Windows 7 woes

6 more replies
Relevance 38.95%

hi everyone

i was wondering does anyone knows how to open port 21 on their router

i need help opening port 21

My router is DL-524
 

Answer:How do i open port 21 on my router

You need to get in to your routers settings by typing your routers ip address in your browsers address bar.
 

5 more replies
Relevance 38.95%

Ok, I don't even know if it's possible, I have just started playing a game (Crysis 2) and when I'm in the game it says I'm under a strict NAT type. I have looked around a lot to try and find a way to change my settings to open, but alas NO LUCK. Only links I find are ones that tell you how to do it if you're connection has a router. I'm not on a router, I'm using a Virgin Mobile Broadband card and the only firewall I'm behind is a windows firewall.

Now, you'd think I could just turn off the firewall and solve the problem.. but no. If I do that, it won't even let me log into the game. Terrible connection issues with this game. Soo.. yeah. I've come here because last time I came here people were real friendly and helpful.

So if there is a way to open NAT on windows 7, while having no router. Can someone please tell me? Thank you.
 

Answer:Open NAT Windows 7 No Router.

6 more replies
Relevance 38.95%
Question: Open Router Ports

Hello all , well i need some help , i want to open some ports of my router and i dont know how to do it , please someone tell me an easy way to open ports , i want to open some ports, not all. a program to OPEN ports not to see opened ports. My router is "TRENDnet" "TEW-231BRP" "802.11b Wireless Router".

Please someone give me a web page plz or a program.

thanks
thanks

Transporter
 

Answer:Open Router Ports

You mean you want to map some ports in your router to specific machines on your LAN. This should be possible through the router's web-based administration interface.Do you not have docs for the router? Or can you not download them from the manufacturer's website if you don't?
 

1 more replies
Relevance 38.95%

Platform: Westell UltraLine Series3
Model Number: A90-9100EM15-10

I know how to forward ports on this router, but ever since I had to restore my windows to a fresh copy, my router doesn't work right.

Also, I restored my router to default settings after I couldn't get it to forward any ports.

This is pretty much my problem, whenever I forward my port I want open, i check it and get the message "Error: I could not see your service on 71.244.125.180 on port (55655)
Reason: Connection refused"

It's driving me insane. I've forwarded ports before on this router, but it's not working this time.
 

Answer:My router will not let me open ports.

Make sure you set a static IP on the computer you want
to forward to and use that port for forwarding.
The IP in that error looks like it may be your modem IP.
 

1 more replies
Relevance 38.95%

I was wondering on how to open ports so i can run a server and be a host.
Can u please give me a simple guide on how to open ports on your router.
OR:
Is there any programs that can actually open ports on ur router for you?
cause im too lazy to do all that command promt stuff. but if using command prompt is the only wy ill do it.

Can u also teach me how to forward those ports to your router so that outside sources can access them.
 

Answer:How to open ports on your router

ragne2 said:





I was wondering on how to open ports so i can run a server and be a host.

Is there any programs that can actually open ports on ur router for you?
cause im too lazy to do all that command promt stuff. but if using command prompt is the only wy ill do it.Click to expand...

Opening a port is a goofy term - - let's start with just using a port.
For a port to exist, some program creates a socket and then uses it to LISTEN for connections. You can see this with (command prompt tool) netstat -oan
Programs which are awaiting connections show up like

Code:
TCP 0.0.0.0:[B]135 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]445 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]1030 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]3389 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]4186 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]8019 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]44334 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]44501 [/B]0.0.0.0:0 LISTENING
the nnn are the 'port numbers' created by the program.

Q? Which ports are open? A: only those that exist, eg: port 135 is open, and port 136 is closed (ie doesn't exist).
Regardless of your other setups for the router and firewall, the port is not open unless a program is LIST... Read more

1 more replies
Relevance 38.95%

I've got a Linksys router and I'm trying to SSH into my home machine (dunmatt.com), however in the UPnP Forwarding page of the router setup neither SSH nor SFTP are in the Preset Applications list. Whenever I try to add it to the customized applications list, if I use internal port 22 (external port shouldn't matter, right? though I've tried it both ways) via TCP it gives me the error "Failure: No space to add Virtual Server or have a duplication port:ssh." I get the same error if I try to use port 22 in Port Range Forwarding.

Not only that, but if I set the Preset Application for FTP to internal port 22 it makes the changes successfully, but doesn't work. So the question is, what else in the router is set to port 22 (I've looked and couldn't find anything that had a 22 in it) that might conflict with the UPnP forwarding? Also how would I fix it?

Edit: I should also mention that if I keep Preset FTP at internal port 21 as is default it works completely, likewise if I SSH from a machine on the LAN via IP address (thus bypassing the router) on port 22 it also works fine.

Edit again: Forgive me for being retarded, I assumed it was a linksys because that's what I usually buy, upon further inspection of the upper left corner of the screen it turns out that it's a Network Everyhwere nr041... so if you can solve my first two questions here's the extra credit: how did I get this router (I didn't buy it)?
... Read more

Answer:Can't open 22 on Linksys router??

I don't think you are on the right page to do the thing you want. You shouldn't be on the UPnP page to setup your port forwarding. There should be another page in the router labled port forwarding where you can specify the range of ports (22 to 22) and the address you want the port forwarded to (the machine you want to SSH into).
 

14 more replies
Relevance 38.95%

I ran an online security check with Symantic, the results of which said my ports 80 and ICMP Ping were open. Should I be concerned?TIA

Answer:Ports open on router

Nothing to worry about; Port80 is an alternative for http and ICMP Pings are simply the means of checking if a user is still on the site.If you have a good Antivirus program and windows firewall activated and combine these with common sense you will be ok.

2 more replies
Relevance 38.95%

Hey does anyone know how to open router prots? I need to be able to play some games, but also try a few other things for my computer. I can't figure out how to open the right ports. Any suggestions?
 

Answer:Can't open Router Ports!!!!

7 more replies
Relevance 38.95%

I've got a BeBox - a Thomson TG585v7 - and for the life of me I cannot find anywhere in the settings how to open ports. I need ports 80, 25, 443 and 987 open and I'm stymied until I can do that. Any suggestions, wise folk? Thanks in advance.

Answer:Open ports on my router

Try here click here

2 more replies
Relevance 38.95%

I need to change some settings on my router (the nat to open) how do I go about doing this? Very simple steps work the best with me lol!(how do i even get to the page to change router settings?!)
 

Answer:Setting NAT on router to open? help

You should start by reading your router manual. After that, try to figure out what you want to achieve and tell us too

"nat to open" does not make sense. Do you want to play some game with someone over the internet? What game is it? What kind of a router do you have?
 

5 more replies
Relevance 38.95%

hey everyone!
I have an router, edimax BR-6104, and I want to open ports for getting High ID in Emule. The ports I need to open are:
4662
4672
4661
4665
If you know something about how to do it please share me and help me on that.
Thanks,
Asaf.
 

Answer:Help me open ports on router!

Uh, I don't mean to sound cranky here, but RTFM?
I am sure there is an answer in the manual that it came with.
 

1 more replies
Relevance 38.95%

Heya!

So, i've been hosting games for a while but i don't know what happened, after i try to port forward router ports they just won't open :O. Yeh, as i go to
Open Port Check Tool it says ''Error: I could not see your service on 62.**.***.*** on port (*****)
Reason: Connection timed out''

So.... How can i open my ports?? Do i have to call my router provider or something??

Answer:Router ports won't open

It really depends on your specific router model to setup port forwarding, it's hard to tell really. But a few things you could do in advance are checking that your computer as a fixed LAN IP address, and forward the port to that IP and make sure a program is actually listening to that port when you run the check online.
Another way to check it would be to connect two computers to the router, one to a LAN port and another to the WAN port, and check whether or not they can see each other.

2 more replies
Relevance 38.54%

I want to know how to open a port on my Siemens Cable Router, I think the version is 2604, not sure where to find the version number (haven't found my original box for the router either).

I am trying to set up an FTP using guild ftp, and I have no idea what to do. A friend told me to open up port 21 or something...

How do I do this?
 

Answer:how do I open a port on my siemens router?

6 more replies
Relevance 38.54%

Got cable broadband installed recently and set up Mentor 4port cable router to share cable modem connection between two PCs running XP. Setup seems ok, both PCs connect to web no problem, decided to check how secure ports were via Sygate SOS and results got me worried.On ALL tests (QuickScan, Stealth, Trojan etc) the following ports are open - 80 and 8080.Spoke to ntl Tech Support who did not seem to worried about this just told me to keep my Virus Scanner (AntiVir) up to date, use a firewall, and run AdAware. Do you think i need to be worried about open ports? How do i close them?My firewall is zonealarm (free edition)

More replies
Relevance 38.54%

hi, I know this is more of a windows forum, but when I was searching this is the place most of my searches lead me too. Right now I'm in Russia using a Zyxel Keenetic router, which works fine without using OpenDns. There doesn't seem to be a model number either, just Keenetic. There's no way that I've found to change to point to the Open DNS servers on the router, only on the individual computers, maybe there's a conflict. The 4g company I'm going through is Yota. When I try to use OpenDNS the internet might work for a site or two but then stops. When I use the standard windows troubleshooting, it says the problem is the DNS server isn't responding. Also it doesn't work on those other guys' computers either. I'm using windows 7 Ultimate. Thanks for your time,
Tony

Answer:open dns not working through zyxel router

Hi Tony and welcome to W7 Forums

Take a look at pages 26 onwards of the manual. It seems to be regarding DNS. Sorry, but it's in Russian, so I can't give any more help than that.

http://www.keenetic4g.ru/public/down...etic-4g-ug.pdf

3 more replies
Relevance 38.54%

Greetings from Holly Jerusalem

Open settings page of any ROUTER

Hereunder step by step to open the page:

1. Go to Control Panel\All Control Panel Items\Internet option as fig



2. Select connections tab as fig



3. Select LAN settings as fig



4. Remove check mark in front Server if available as fig



I am sure that will work

More replies
Relevance 38.54%

Everytime i start up an online games of Gears of War 2 it brings up a notice saying that i have strict firewall settings. This means much slower matchmaking and that sometimes i cannot connect to other players. Does anyone know what to do?
 

Answer:How to open up ports on router for X360

http://www.rogerdickeyjr.com/61/how-to-setup-your-router-for-xbox-360-natport-forwarding-part-2
Any help ?
 

2 more replies
Relevance 38.54%

hi
I have a netgear router model wgr614v10 and a ATT motorola modem. I've been trying everything to open my nat so i can get my xbox live to work better. I've tried portforwarding, enabling UPnP, enabling DHCP, and more. Can anyone help with my problem. Also i'm not the best at this stuff so if it was easy instructions that would be perfererred.
 

Answer:Open nat on Netgear router WGR614v10

8 more replies
Relevance 38.54%

Hello folks... I am sick and tired of constantly fiddling with my static IP address on consoles and with my router in order to try and get Open NAT, or trying to choose which ONE of my many consoles get to be in the DMZ, only to have something reset my settings behind my back. Really sick of it.

So, I want a router than designates one of its physical Ethernet ports as OPEN NAT or DMZ, and anything connected to that port, all switches and devices that may be attached, are automatically OPEN NAT or DMZ. This would be phenomenal for me as I already have all my consoles and other entertainment devices already hooked to a series of switches going back to one port on my router, all hard wired.

Where can I buy such a router, and if it doesn't exist, why the hell not?

EDIT: Just found one that might work from T-P Link on Amazon... it seems to have a dedicated DMZ port, but then I realized that I am forced to use a specific router with MoCA by my ISP (I have FiOS). So can I then buy a second router, give it a static IP, set that static IP as DMZ in the first router, and hook all my devices that I want to be Open NAT/DMZ to the second router by turning off NAT completely on the second router? Will that even work?
 

Answer:Looking for router with an Open NAT/DMZ port! Does it exist?

just get a static ip for every console you have... plus one for your router to connect your household's other devices, pcs/tablets/phones

set them up all on a switch that connects directly to your isp, none of your consoles will need NAT or DMZ...

but tbh, most consoles are pretty NAT friendly, maybe your problems aren't with that...
 

11 more replies
Relevance 38.54%

I have a router.
How I check/test which port are really open ?
 

Answer:testing open ports of a router

10 more replies
Relevance 38.54%

Hi,

I'm hoping someone will be kind enough to help with a problem. I am connected to my internet network on my PC through an Ethernet cable, but cannot access the internet through a browser or anything else. This is the second time this week this has happened. I had a separate PC issue early this week which caused me to reinstall windows. I have had the issue with connecting to the internet occur twice now since reinstalling windows, both times after installing windows updates. I resolved the first occur acne by having my ISP come out. I do not know what they did to fix the problem, only that the router was not the source, and he changed something while logged into the modem settings. Any help would be appreciated.
 

Answer:Cannot open web page, connected to router

First get a command prompt and then issue these to commands
ping 8.8.8.8
nslookup www.google.com

both should give some answers, neither should timeout or show errors
 

3 more replies
Relevance 38.54%

Friend has relatively new custom built PC -AMD 3000, 512 MB ram,Win Xp with SP2 installed, Norton antivirus and personal firewall. Cable broadband connection via a router and ethernet port. After SP2 installed ran shields up on grc.com which showed Port 80 open.I don't know situation prior to SP2 install (mate knows very little about PC's and has never checked firewall)but wonder if this is connected in some way to router. i.e. does port 80 have to stay open to communicate with router and will all be closed on internet side of router. Any info would be of great value including how to close said port 80 if needed. Thanks.

Answer:Cable router and open port 80

on routers port 80 is open by default because its for basic internet connectivity with out it you wouldnt be able to onto the internet. This is open by deafult.

7 more replies
Relevance 38.54%

All,

How do I open ports in a Linksys Router firewall? I read the way to do it via Microsofts ICF (http://www.microsoft.com/WindowsXP/expertzone/columns/durham/03november10.asp) but what I need is to do the same with my router. Thanks!
 

Answer:How do I open ports in a Router Firewall?

see if your router is listed here
 

1 more replies
Relevance 38.54%

Hey. I have this router http://www.tp-link.ae/products/details/?model=TL-WR841N

I have tried everything to open the ports in order to use my Foscam IP Camera. I doubt my vonage modem would interfere as it is connected to one of the LAN ports in the router itself. Can anyone provide me with any ideas on how to open them? I dont want this foscam ip camera just sit and collect dust. Thanks
 

Answer:router wont open ports

Opening ports on the TP Link TL-WR841N model router
http://www.tp-link.com/en/article/?faqid=72

If that doesn't work, email support
http://www.tp-link.com/en/Support/contact/

or telephone
http://www.tp-link.com/en/Support/contact/?categoryid=530
 

3 more replies
Relevance 38.54%

Hi everyone !

This is my first post on this website but i really need help and please excuse my poor english

So recently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually

dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the

ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it.

Plus I am not allowed to reset the router to factory settings.

For about three days I have been looking up ways to change the ports on my router through my computer but nothing has

worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.

Can anyone please help me with this! I appreciate it !!!
below is my system's information,

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
I am not that good at computing but i am trying to learn~

Hope you guys can give me awesome feedback, thanks!

PS( i play league of legends! )
 

Answer:Possible way to open a port without router access?

well... are you sure that he didnt just block the ports on your computer?... and it the router is blocking a port... you must have access to the router to unblock them
 

2 more replies
Relevance 38.54%

Hi,
I have a TP-Link Archer C7.
Firmware Version: 3.14.1 Build 140929 Rel.33293n
Hardware Version: v2
There are a few sites I cannot access. For example, I cannot access www.frys.com, or www.dell.com.
Other than a few exceptions, I have good Internet access.
I cannot ping either site from a command line in Windows 7 (request times out).
I can ping them in the router admin pages using the ping diagnostics tool TP-Link provides.
I get the same results from all devices on my network, wired or wireless.
I can access these sites when I connect directly to the modem, but not when I connect the router.
MTU adjustment has made no difference (set to 1300 based on pinging Google.com and finding no fragmentation as high as 1272.).
I have double checked that no restrictions, filtering, scheduling or access control is enabled.
I tried temporarily disabling the SPI firewall.
I tried temporarily disabling IPv6.
I updated the firmware from the prior version 131217 last night, but I notice no difference.
I do not believe I need to use MAC cloning. My ISP is Astound. My WAN connection is dynamic IP.
I have not modified the primary and secondary entries for DNS servers.
It is after extensive Googling and attempts that I have compiled the above info. I do not understand all of it, but am just trying to dig up an answer. It seems a lot of people have posted about a similar issue (having a few sites inaccessible), and across various makes and models of routers, but... Read more

Answer:Solved: New router will not open some web sites

10 more replies
Relevance 38.13%

I was hosting a server fine off my computer until one day a virus took my computer for a spin to hell. After removing it my ports all seem to be closed. I used a port scanner and it keeps saying 25565 is closed, as well as other ports, but I need 25565 the most right now.

Things my tech did:
Tested if it was my IP by using a router and forwarding the ports on it. - Failed
Changed profiles on computer and hosted - Failed
Uninstalled and shut down all firewalls - Failed
Uninstalled all hamachi and tunngle services - Failed
Disabled any known ideas that he knew that would close the ports - Failed

However we ran the server with the same connection on a laptop and it worked just fine. So it is something to do with my system. This laptop ran the same anti-virus software as well when hosted.

I've ran MS Essentials, Avast, Kerpenski or w/e it's called, Combofix, Spybot S&D, Malware Bytes and some other things that my brother ran but he uninstalled them later.

Completely stumped on this one.
 

More replies
Relevance 38.13%

Hi Everybody
I want to make a normal minecraft server for my friends.. But I can't forward ports because my internet connection has 2 router and i don't have access for the second router (the reason of that is my internet provider).
I thought the second router has opened port (eg.: 80) and I should use that, but i don't know... Isn't worked.
Can I open port in this case?
Thanks for any help, and sorry if made same language-mistake the English isn't my mother tongue and i just learn it.

Answer:Open port on 2 router system, without access

You cannot have two routers connected so I suspect you have a BT Openreach Modem connected to a Router, this is the usual set up for a Fibre connection unless you replace both with a VDSL Router.
You need only access the Router and Open ports on that but many routers supplied by service providers are quite basic and cannot be changed from a standard setup.

10 more replies
Relevance 38.13%

If you rely on BT for high-speed internet or VoIP, there's a good chance a pair of UK-based researchers know how to enable a backdoor in your router that leaves you wide open to eavesdropping, caller spoofing and other nasty attacks.
The vulnerability resides in the BT Home Hub, one of the UK's most popular home routers, according to Adrian Pastor and Petko D. Petkov. A constellation of bugs in the router, which is made by Thomson/Alcatel, make it possible to bypass the device's password authentication system and gain complete administrative control.

All an attacker needs to do to exploit the weaknesses is lure the victim to a maliciously crafted website, according to this post on the GNUCitizen blog. The exploit doesn't require knowledge of the administrator password.
"The BT Home Hub is vulnerable to an authentication bypass that allows us to make any administrative requests to the router from a malicious website WITHOUT needing username and password," Pastor wrote in an email to The Reg. He and Petkov have confirmed the vulnerability in the BT Home Hub running the most recent firmware. They believe the exploit will work on all Thomson/Alcatel Speedtouch 7G routers.
US-based BT representatives didn't immediately respond to requests for comment.
The scope of the vulnerability and the ease in carrying it out means that a remote attacker can quietly gain full administrator control over a device simply by social engineering a user into visiting a website. The exploi... Read more

More replies
Relevance 38.13%

I've been using ClarkConnect for over 2 years now and have been trying out a few other gateway/router/firewall distros lately so I thought I'd post info on them.

Here is what I have come across so far (not in any particular order).

Router Projects:

LEAF: "A secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways; it's primarily used as a Internet gateway, router, firewall, and wireless access point."

SmoothWall: "SmoothWall Express is an open source firewall distribution based on the GNU/Linux operating system. Linux is the ideal choice for security systems; it is well proven, secure, highly configurable and freely available as open source code. SmoothWall includes a hardened subset of the GNU/Linux operating system, so there is no separate OS to install. Designed for ease of use, SmoothWall is configured via a web-based GUI, and requires absolutely no knowledge of Linux to install or use."

Freesco:"FREESCO (stands for FREE ciSCO) is a free replacement for commercial routers supporting up to 10 ethernet/arcnet/token_ring/arlan network cards and up to 10 modems.
Like most players in this field, it runs off one floppy
FREESCO runs in as little as 8 Mb RAM."

ClarkConnect: "ClarkConnect transforms standard PC hardware into a dedicated broadband gateway and easy-to-use server. The award-winning Linux-based solution ... Read more

Answer:Open Source Router/Firewall Distros

Nice job nomar!
 

3 more replies
Relevance 38.13%

i have a blitzz 4 port router, and i cant do file transfers on AIM and stuff like that, and i cant figure out how to manually open the ports necessary to send and get files
 

Answer:i need to figure out how to manually open ports with my router

Don't know which Blitzz router your using but taking the user manual "MU_BRT200_01.pdf" as a guide, opening the ports is described in the section "Virtual Server" (page 17 onwards).

There is a "Virtual Server" Menu page into which the the configuration details have to be entered.
The Application Port drop-down list on the "Virtual Server " menu may offer up AIM (in the same way as it offers FTP, telnet, etc). If not, then you should be able to add it.
The port type is, I expect, TCP for AIM (but I could be corrected on that as I am not a regular user of AIM).
You need to know the ports AIM uses. Judging by the list on http://kbserver.netgear.com/kb_web_files/n100495.asp AIM requires port 5190.
So you'd select "Single". But it you need a range then select "Range" (again that is AIM-specific info someone else may be able to provide if you don't already know it).
Then enter the port number. Thus "5190 to 5190" in the provided fields if a single port or the range if that is what AIM requires.
Pick the LAN IP address of the PC you want to run AIM on and enter that in "Local Server IP address". So that would be 192.168.1.2 or something of that ilk depending on your LAN set-up.
If all your details are correct press ADD.
That should be it as far as I can see.

I don't know with the Blitzz routers, but with some (many?) SOHO router models it is only possible to port-forward a particul... Read more

1 more replies
Relevance 38.13%

Hi (hope this is in the right forum)I access the control panel for my own website using the URL : click hereI am behind a Netgear RP614v2 router, and had set the port forwarding up on port 2083. I recently became unable to access the site from home. It is just timing out when trying to connect. If I disconnect the router and go straight through my modem, the site works fine. And from other people's PCs it is working OK.I have tried: Restoring the router to default settings, and upgrading the firmware to the latest version. Any ideas?

Answer:RP614v2 router - blocking port that I need open?

Port forwarding wont work.Try disabling the firewall, seeing if that prevents it.

1 more replies
Relevance 38.13%

Im sure you've all been asked this question before about how to open the NAT settings for Xbox Live. I searched the internet and found thousands of different solutions but none seem to work for me.

I know a bit about networking and the like so i had a little head start but this has really stumped me. I've tried UPnP enabling and setting the Xbox's IP address with DMZ but nothing, ive tried manually entering the ports for forwarding and disbaling UPnP but nothing......

Ive tried disabling the firewall but still nothing. No matter what i try i cannot get the NAT setting to 'open' it is always on 'strict'

Ive phoned my ISP and tried different DNS server addresses but still it says NAT STRICT.

Can any please help, this is driving me mad!!!

My internet connection goes from my router via ethernet and to a switch. This then goes to my PC, my Xbox and my sisters laptop. The switch couldn't be causing a problem could it?

Thanks in advance guys
 

Answer:NAT settings on SmartAX MT882 router? How to open?

10 more replies
Relevance 38.13%

I typically open a single port for torrents, and leave it alone. Upon coming back home from college however, I noticed that my family's network for opening ports is filled with randomly opened ports for ips in the network. I've closed the ports and opened ports for myself, but that is undone after some degree of time with a new set of opened ports. No one else in the family is doing it, and I've since taken security precautions. Previously, the network had no password, but I now changed the router password from default and I've added WPA-2 Personal password. However, the ports keep on opening (and overriding mine). I've asked the people in my family to run virus checks, although I'm not sure all of them have.So, back to the question:Could this be a virus or spyware? I also found this term on wikipedia:http://en.wikipedia.org/wiki/Firewall_pinholeCould that be related to my plight?

More replies
Relevance 38.13%

I know there have routers that have been crowdfunded. I think there would be a big demand for a dd-wrt that has the full verson on it but also has simple mode for people who still wannt the advanged that a router but just not the complex menu then people who still wanted the accass the full dd-wrt enalbe advance mode
I think this would be cool to have something that and that router firmware for the router would be completely open source
I have been thinking about wanting to make a router like this but have no coding experience just a idea what do u think
 

Answer:crowdfunded router idea (truly open source)

It has been tried, and shot down. There were also legal issues involving the FCC. In the end, it is not a new idea, and has not been worth the headache for someone to try to deal with.
 

15 more replies
Relevance 38.13%

my new room mate helped me with a router set up before and at some point I changed the ISP and reset everything with a new password. My room mate asked for the new password, so I logged into my router and from there he took over, copied the password and also opened up a port range to go to some IP address which I don't know whose it is. The next day my laptop wouldn't start and ran some Repair application. Eventually it started back up and I ran a virus and spam check but found nothing. My question is: why would my roomate open up a range of ports? And what risk does this pose for me? I actually just disabled the open ports but I don't want to overreact either. Thanks!

Answer:risk of open application port on router

Ports are how your computer (or router) communicates with the outside world. Your roommate may need to open some ports for programs that demand specific ports to function optimally. He may have a game system that requires port activation. Not as scary as it sounds. I would ask your roommate just to make sure he knows what hes doing.

2 more replies
Relevance 38.13%

netbook shows connection but will not open any sites

Answer:my netbook shows it is connected to the router won't open

The netbook is connected to the router okay, but that doesn't necessarily mean the router is connected to the internet.You need to check that the router is actually connected to the internet. It may need restarting to re-establish a connection, or your ISP may be having technical problems at their end.

2 more replies
Relevance 38.13%

Hi I've been having this problem for quite a long time and I've done everything under the sun that I can think of. Right so here's the situation.
For over a year now I've been trying to open ports on my Linksys WRT54GS and it just won't have it. I have a Static Ip, and when I remove the router from the equation I can get access through the port so I know its not my ISP blocking the ports.

I've set up port forwarding on a different router and its worked fine so that pretty much eliminates the possibility that I'm doing something wrong. The only thing I can think of is I have a faulty router, I hope its not the case but I'm at the end of my rope and I want to get this fixed.

Windows Xp Professional x64
Core 2 Quad Q6600
Evga 790I Ultra
Geforce 8800GT x2
4GB 1333 @ 1066

Linksys WRT54GS Firmware V1.52.5
 

Answer:Solved: Linksys router won't open ports

11 more replies
Relevance 38.13%

My wife has a computer at work that is a PC (standalone) that is sometimes connected to the internet via a USB wireless adapter (Linksys). I can open Internet explorer, when the usb adapter is not connected, however, once the computer is connected to the Internet, IE does not respond. All other programs and applications are sluggish. I searched these forums and tried some suggestions, but did not have any luck.

Your help is appreciated.
 

Answer:Cannot open Internet explorer when connected to router

6 more replies
Relevance 38.13%

I have a Netgear router model WGR614v10 and att motorola modem and my NAT is strict. I have tried everything from port forwarding and nothing worked. Also i even tried just going to wan settings on my netgear router and just change it to open and still wouldn't work. Can anyone help me and make the instructions easy for someone who isn't a very good tech person?
 

Answer:Open my NAT on my router to play xbox live

Try this to have your NAT as open is to make sure DHCP is enabled in the router and make sure the 360 does NOT have a static IP. I cleared all the LIVE ports i was told to forward and don't have the 360 IP in the DMZ (the 360's IP is now set as dynamic and not static). Finally make sure UPnP is enabled and reboot the router. Works fine now and have no restrictions on using XBox Live.
 

2 more replies
Relevance 38.13%

A Win98SE computer will not open the router's webpage with either USB nor ethernet connections. I have tried two different routers, a Dynalink RTA1320 which is the PCs router, and my own router, a Dynalink RTA300.

When hooked up to my router the PC can browse the internet, but not open the router's homepage.

When hooked up to the PC's router (the RTA1320) I cannot open the router's homepage in order to setup the ADSL internet connection.

I also cannot ping either of the routers' webpages, 192.168.1.1. The ipconfig /all is as follows:

Physical Address. . . . . . : xx-xx-xx-xx-xx-xx
DHCP Enabled. . . . . . . . : No
IP Address. . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . :
Primary WINS Server . . . . :
Secondary WINS Server . . . :
Lease Obtained. . . . . . . :
Lease Expires . . . . . . . :

net adapter :

Description . . . . . . . . : Realtek 8139-series PCI NIC

Physical Address. . . . . . : xx-xx-xx-xx-xx-xx
DHCP Enabled. . . . . . . . : No
IP Address. . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . : 192.168.1.1
Primary WINS Server . . . . :
Secondary WINS Server . . . :
Lease Obtained. . . . . . . :
Lease Expires . . . . . . . :
That's all I am able to copy from that list - I can't seem to grab the the bit at the top.

Any ideas on how to solve this would be appreciated.
 

Answer:Solved: Cannot open router webpage on Win98

14 more replies
Relevance 38.13%

Hello, i am trying to update a Router model Asus RT N10 firmware but the files have a TRX ending , anybody know how to open these?

Thank you

Answer:how to open a TRX file to upgrade router firmware

You don't open them, you just point it to that file,



Looks pretty straight forward, here's a link to your manual too,

http://setuprouter.com/router/asus/r...anual-1095.pdf

Page 30 is what that snip is from.

9 more replies
Relevance 38.13%

Hello,
I'm brand new to this site. Just read about your site in my AARP newspaper, so that should tell you I'm 60+.
My son, a high school teacher, has set up all the desktops I've ever had and the current laptop, as well as the Belkin router. My desktop is Dell dimension E521, purchased May, 2007. The operating system is Windows Vista home premium. My laptop, which is what I'm using to send this message, is a Dell, purchased in 2013, with Windows 8.1 operating system. Up until about 3 weeks ago, I was able to access my email and surf the web from the desktop. The router is Belkin, purchased right after I got the laptop, and has worked fine until 3 weeks ago. I can access everything with no problem from the laptop, but the desktop and the router now fight each other. Just tried to get on so that I could tell you what happens. I click my browser icon, Mozilla Firefox, and the home screen comes up fine. I then click to sign in to email and the router light goes from blue to orange and after about a minute, I get a message "server not found". I close that window and the router light returns to blue. My granddaughters are not happy either because I let them use the desktop to play their games and access sites such as funbrain. Frustration level now runs deep as I'm seriously considering getting another router. My house is a 1-story ranch. ISP is AT&T, DSL with a Westell 2100 wired modem. Your help will be greatly appreciated by this frustrat... Read more

Answer:Belkin Router won't let my Dell PC open email

goto control panel
internet options
and look at connection

anything in the "dialup and private settings" box

click on LAN
and see if a Proxy is set - see below

How is the PC connected to the router - by cable, by wireless or are you using powerlines, connected via the house electrical system ?

I click my browser icon, Mozilla Firefox, and the home screen comes up fine. I then click to sign in to email and the router light goes from blue to orange and after about a minute, I get a message "server not found". I close that window and the router light returns to blueClick to expand...

what happens if you open say google.com or bbc.co.uk pages ?
is it any webpage that is opened after the homepage ?
what is your homepage ?
what happens if you click on a link from the homepage OR just do a refresh of the homepage
Is the homepage updating at all ?
------------------------------------------------------------------------

Remove any proxy settings
Check your browser's settings, remove or uncheck any proxy settings if found

http://www.plus.net/support/software/browsers/proxies.shtml
http://www.ehow.com/how_5512742_remove-proxy-server.html

Google Chrome
https://support.google.com/chrome/answer/96815?hl=en-GB
This will open the Internet Explorer Properties dialogue (Windows) or the Network dialogue (Mac) where you can adjust your network settings

Firefox
Tools>Options>Advanced>Network Tab>connections Settings... button>
Newer release ... Read more

2 more replies
Relevance 37.72%

hi, i have wireless internet access through a motorola canopy wireless router, and i just want to open up port 21, because no1 can connect to my ftp or i cant connect to other ftp's.. i dont know why, ive tried port 21 and other ports as well but nothing seems 2 b working and its extremely fustrating, now i have access to the router config. and the only place i can put ports is something called "user defined port filtering configuration" and it also asks me to put in some decimal value.. well that kinda throws me off so.. huh.. if anyone can help, id really appreciate it...

thanks in advance
 

Answer:how to open ports on a motorola canopy wireless router

First, FTP is much more complicated than just forwarding port 21. You might want to read up on FTP and firewalls

Second, the exact model of the router would be helpful..
 

5 more replies
Relevance 37.72%

My 3 year old Dell laptop has recently become extremely slow
slow to boot up
Slow to open firefox browser
Slow to connect to my router
Slow to execute commands (open programs)
And slow to awake from Sleep
I am running W 7 have minimal start up programs and would appreciate any advice on what the problem might be.. Thanks for any help

More replies
Relevance 37.72%

Hi all,

BACKGROUND:
So I have had a moderate NAT while gaming on Xbox Live. From what I understand, opening the ports on my router will better enable my network hardware to communicate with Xbox live servers, changing my NAT to open, and thus allowing me to connect to my best friends party so we can play team doubles on Halo 4!

CURRENTLY:
Anyway... I have tried opening the ports by accessing my router by typing its IP address into the URL. When I do this however, I receive an error message saying "this webpage is unavailable." I have tried this with both the Default Gateway and the IPv4 Address to no avail.

ADDITIONAL INFORMATION:
C:\Users\TomBot500>ipconfig

Windows IP Configuration

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::2a:b84b:1e23:6a9%13
IPv4 Address. . . . . . . . . . . : 192.168.2.32
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

MORE ADDITIONAL INFORMATION:
Also, I want to note that the router I am currently using is a DELL TrueMobile 2300 Model: WX-5565D

WHAT THE INDIAN DELL GUY SAID:
Moreover, I called DELL technical support for help on the issue and they told me that the router I was using is approx. 9 years old (about 2,518 in technology years).

SO BASICALLY:
With that said I am left to assume that maybe, just maybe, the operations I am trying to perform on my ro... Read more

Answer:Trying to open my router ports for xbox live NAT issues.

So you've tried typing 192.168.2.1 into your browser's address bar, and you get "cannot display webpage"?
Try resetting your internet browser's settings, then try it again.
Or type in http://my.router in the address bar.

9 more replies
Relevance 37.72%

Hello all,

I am planning to buy a router that will go in my structured media panel. It is a Leviton brand one. I put a piece of plywood behind the panel so it doesn't matter if the router mount holes match with the panel. I can drill through the panel and mount the device to the plywood. I am thinking to just get a couple of wireless access points to place around the house and a wired router that goes in the panel. I would like to get it without the wireless (don't want antennas wasting any space in the panel). I also want to find one that can handle open firmwares. Can anyone recommend a good router for this situation? Thanks.
 

Answer:Need open firmware router that will fit in structured media panel

Mikrotik Routerboard 750GL. A little larger than the size of a patch of cards. 5 ports ethernet, no wifi (optional I think).

edit: Here's a 10 port model, 5 GigE and 5 FaE.
http://routerboard.com/RB2011L
 

3 more replies
Relevance 37.72%

hi all just as the title says, i cannot figure out how to do it, what is a trigger port ? questions questions can anyone help me please

Answer:how do i open port 6888 in my belkin router/modem?

sorry it was port 6881

9 more replies
Relevance 37.72%

Can someone help me with a dummyproof step by step how to: Linksys 8 port router: Open up firewall for PcAnywhere 10.5

I now that I will need to logon to the Linksys router and then open up the port(s). The questions is what prot number for PCAnywhere 10.50 and what do I need to change on PCanywhere to go in thru that said port?

help please..
 

Answer:Linksys 8 port router: Open up firewall for PcAny

By default PCA uses ports 5631 TCP and 5632 UDP
 

1 more replies
Relevance 37.72%

Im back
ok I now have fibernet,,did have dsl..went to 3.m then a few days later upgraded to 5m
I bought a new cisco router.I help on a few sites and now I can't get on silentground.org is the one I've been trying different things to do..First of all I disabled my internet connection and hooked to my sons wireless router across the street,I could get on site.I copy and pasted site to trusted sites threw tools >internet option>security same thing says

Home Network Defender

Web Threats Detected

Code:

http://www.silentground.org/forums/

The Safe Web Surfing feature blocked this website, which has a: LOW SECURITY SCORE
I've searched for Home Network Defender and looked in add and remove>found nothing.I think after I put pass in my router and secured it I done something to block certain sites..can you help me please..?
 

Answer:Solved: Can't open certain website After adding fibernet and or new router

I am running XP windows on main computer,mylaptop anf bf's vista laptop all same problem,all hooked threw router
 

2 more replies
Relevance 37.72%

I recently purchased a new laptop that came with Windows 8. Now, I'm not at all certain the issue is windows 8 related.

So I've been trying to host games with friends in multi-player (minecraft, terraria, risk of rain, borderlands, etc) but they never can seem to join my game. I've tried turning off my firewall and my antivirus. (I wasn't even on the internet, so it wasn't a big risk) We're connecting by ethernet, PC to PC, and I've ensured our IP addresses are in the same subnet.

So here's the kicker: I can join any game, so long as they host it, not me. And i can ping their PCs just fine, but if they try to ping my machine they get a "Destination Host Unreachable".

Anyone have any clue as to what could be blocking my ports from opening?

PS: don't worry about burying me with jargon, I'm a network administrator in training.

Answer:PC Ports wont open to host a game (NO ROUTER) PC to PC LAN ONLY

I assume you are using a Crossover cable and not a standard Ethernet Cable?
Have you assigned a Static IP address for all the computers playing the game? and is it in the same scope as the other computers? (eg) 192.168.2.x ?
Go to each computer and go to Search and type CMD Right click the CMD results and Run As Administrator. In the Elevated Command Prompt type
ipconfig /all and press enter. Copy the text and paste it into your next post.
You might get a better response if you post in the online gaming forum or the Networking forum: Online/Network Gaming Support

16 more replies
Relevance 37.72%

Hi,
I have been looking for a new router as my current one has packed in. I am mostly interested in a router with a fast and stable wifi and high throughput which can manage a high amount of maximum simultaneous connections. The linksys e4200 seems perfect and very well reviewed.
I am currently on adsl, no cable in area, so i would need one to have an adsl modem. Is there a version with a modem? Or will i need to look around for another?
I am mainly interested in throuput and the reviews and comparison sites sugest that linksys seems perfect midway between max simultaneous connections and price
Does anyone know of a comparison website that has adsl routers. The information am looking for on that's between 60 and 160 with high amount of ram, high throuput for Maximum Simultaneous Connections, similar to link text

Answer:recommend router high open connections without freezing

Linksys E4200 wireless router could be used to connect to ADSL modem, so no problem if you want to use it. In addition, you could also have a look on other wireless routers here.
Hope this helps.

2 more replies
Relevance 37.31%

Hi,
When I soft-boot my UTStarcom UT 300 R2U modem/router, some sites open fine and others don't. Some others take terribly long to open. Then when I hard-boot it they all open fine. Is this an issue with its software (firmware) or hardware?
 

Answer:After ADSL modem/router soft-boot some sites don't open

you could check with their website to see if they have a firmware update
 

1 more replies
Relevance 37.31%

Anyone know how to crack open a Belkin Router Case - Model: F5D7234-4 v3
Need to open the router case, in order to attach pigtails for external replacement antennas. Have not yet found any screws, any suggestions anyone?
 

More replies
Relevance 37.31%

Hello

I have a Sagemcom FAST3686 router. I use it for my PC with cable and wireless for PS4, Xbox1 MacBook Pro, IMac, Sonos, and a lot of other stuff.

For a long time, I have had problems with a NAT3 and strict NAT in games. Both on the PC and on the consoles. Nothing have worked, port forwarding, MTZ or anything.

Then today I put my Apple Airport Express on the network. I put cable from router to the Airport and I still have the cable from the Sagemcom to my PC.

I have put the Sagemcom in bridge mode and disabled the wireless network in it. I have then set the Airport to DHCP and NAT.

Now I have open NAT on the PC and the consoles 😊

But is this a correct setup? What about security?

I simply don?t understand why PC now have an open NAT, when it?s still cabled from the Sagemcom, that is in bridge mode now?

More replies
Relevance 37.31%

Dear all,

My Client has Internet Shop in a Resort. he gives access to people to use internet through this Wireless Router. Guest use their Laptop. he wants to setup in a way that as soon as people open internet first browsing page to open (e.g.: www.yahoo.com) never mind whatever Default homepage is in their laptop and after that page opens, than user can go to any page their like. can it be done or not? if yes than is there any settings i can do in the Router or i have to use any software? am using D-Link Wireless Router.
Hope my question is not confusing, any suggestion will be highly appreciated..

Thanks
Wild_West11

More replies
Relevance 37.31%

Need to open the router case, in order to attach pigtails for external replacement antennas. Have found two screws under model label, which appear to be the only screws, but still cannot snap open case.
 

More replies