Computer Support Forum

Device Driver failed

Question: Device Driver failed

I just bought the Nikon Coolpix L22 digital camera. I installed their software and when I connect the camera via USB port I receive error "MTP USB Device failed Nikon DSC Coolpix l22-PTP.
I am running Windows 7, 64 bit, 8GB RAM, AMD Athlon Dual-Core processor 7550, 2.50 GHz

Relevance 100%
Preferred Solution: Device Driver failed

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Device Driver failed

Hi,Try the Troubleshoot compatibility, and see does it works with XP Because some programs(drivers) doesn't work with windows 7 and worked with windows xp...You have the user manual for that model hereHope this help Max

4 more replies
Relevance 63.96%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 63.96%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 63.96%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 63.96%

trying to fix audio problems, volume control states that no audio output device is installed, i downloaded the appropriate driver from lenovo site, also downloaded two seperate versions of conexant, the installation process begins but is cut short and the following message displayed..."driver instalation failed could not find the MEDIA device for this driver" can anyone offer some advice?

Answer:R61e "driver instalation failed could not find the MEDIA device for this driver"

nath, welcome to the forum, have you installed the UAA HD audio driver? You can find it by scrolling down a bit on the R61e Audio Driver Site, please ensure you follow the instructions.  Hope this helps

2 more replies
Relevance 63.96%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 63.96%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 63.96%

I tried to update my older Radeon ATI 5450 GPU via windows update...

I received the message from windows update, and showed it failed update with the 0x800706be

However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?

Answer:Failed Update 0x800706be driver...but device mgr shows updated driver?

You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.

2 more replies
Relevance 63.96%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 63.96%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 63.96%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 63.96%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 63.96%

Hi , I just reinstalled my SL500 but i got a problem.I download the lastest audio driver from lenovo site and i've got this message Driver Installation Failed : Could not find MEDIA device for this driver....I've searched everything i could find in google and the forums but i've got nothing... I'm usin Win XP 

More replies
Relevance 63.14%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 63.14%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 63.14%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.14%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 63.14%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 63.14%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.14%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 63.14%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 63.14%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 60.68%

I have tried to fix this issue. I have Mobile Intel 965 Express Chip Set Family showing the Yield sign. I keep getting the Device Driver Failed to start and the picture is distorted and make the computer very slow. Is there a fix?

Thanks

More replies
Relevance 60.68%

Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 °C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 °C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 °C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 °C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 °C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 °C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio

Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.
On occasions the only response is the pop up message driver device failed to install.
The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.
Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same re... Read more

Answer:W7 + device driver failed to install

16 more replies
Relevance 60.27%

OS: Windows Vista Buisness Edition
Device: Zen Vision M

Hi guys, I've had this Zen for almost a year now, it docks jst fine with my win 2000 rig, however it fails to work with my vista laptop.

I plug in the Zen, the "installing device driver" icon comes up in the sys tray, after a few moments it says "driver install failed."

It recognizes it as a MTP device when it is loading.

The zen screen shows it as "docked."

Help!!
Gimpster
 

More replies
Relevance 60.27%

Periodically, I get a message which states:C:\Progra~1\Symantec\S32EVNT1.DLLAn installable Virtual Device Driver failed Dll initialisation. Choose close to terminate the application.I think this happens when my screen saver starts.i have recently uninstalled Norton antivirus as I was getting problems with my PC looping on shut down, I believe this was due to "common client" updates not installing.Any ideas please?

More replies
Relevance 60.27%

Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???

Answer:Windows says device driver installation failed

You have to reinstall your printer drivers or you're probably going to continue to get the error. If you are unsure how to go about updating your device drivers for the printer, I would suggest you start here:

What are device drivers? A quick device driver installation guide.

good luck.

2 more replies
Relevance 59.86%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 59.45%

"The installation failed because a function driver was not specified for this device instance"
I received this message while installing a USB driver. I have an 80GB External USB 2.0 hard drive attached that was working great a few days ago. I logged on one day to find this device "unrecognized". When I checked the device manager, it said that the driver was missing (?!). I searched for the driver on the MS website, and the device manager seemed to find a suitable one, but upon install I got the message above.

I found the old driver on my system – which seemed odd to me, deleted it, tried to reinstall and received the same message.

I understand that USB 2.0 is backwards compatible, plus it was working previously, so it seems strange that it suddenly died.

Any help is greatly appreciated.

BOB
 

More replies
Relevance 59.45%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 59.45%

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

Answer:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 58.63%

Hi, guys.

When I want to install certain programs, there is a set of error messages that makes the installation fail. They're as follows:

"c:\PROGRA~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver failed Dll initialization. Choose 'Close' to terminate the application."

If I push "ignore" then this message appears:

"c:\Windows\system32\autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application."

I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this?

I've been having this problem for the longest times and threw away a bunch of software because I simply couldn't install them. It's soooo frustrating. Please help!
 

Answer:Error Message: virtual device driver failed Dll initialization

It's a fairly common problem with an easy fix.

Download and run the file in this post from Elvandil:

http://forums.techguy.org/2178768-post2.html

It will fix the second error -- I'm not sure about the first.
 

3 more replies
Relevance 58.22%

I am using a Satellite L300 series laptop with a TSSTcorp CDDCDW TS-L633A CD/DVD drive, however the drive has presently stopped working, saying that:

"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"

I have tried uninstalling the drive and restarting the computer however when the laptop attempts to reinstall the driver I get an error message saying:

"Device driver software was not successfully installed"

Any ideas for how to get the disk drive up and running again?

Answer:Satellite L300: TSSTcorp CDDCDW TS-L633A Device Driver Failed

Hi

I think this can be solved very easily.
There are some threads which provide an solution;

Usually you need to delete this device in device manager.
Then you have to go to registry and have to remove the upper and lower filters from registry key.
Here you can get more details:
http://support.microsoft.com/kb/270008/en-us

After that reboot the unit.

4 more replies
Relevance 58.22%

I had Norton Internet Security 2006 on my PC, uninstalled it and also ran the Norton Removal Utility (Ver.2008.0.1.19)

When I try to install a program, (Presto PageManager 7.15), at the end of the install I got 2 error messages:
The 1st is "AddPrinter Error: 1796".

The 2nd is related to Symantec: (16 bit Windows Subsystem)

?C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DLL initialization. Choose 'Close' to terminate the application.?

I?ve researched the problem extensively. It relates to registry key Virtual Device Driver VDD. I tried to delete the key, delete the data value, etc. Nothing helps. When I remove Page Manager & try to reinstall I still get Error messages telling me the Virtual Device Driver is not setup properly or it?s data is wrong.

Below is my HJT log file.
Please let me know what I need to do.
 

Answer:C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DLL in

Re: C:\progra~1\Symantec\S32EVNT1.DLL. An installable Virtual Device Driver Failed DL

Try running SymNRT, the Norton Removal Tool from Symantec. It works better than any of the 3rd party Norton removers. It may be too late, but it might still be able to clean up any remnants. Get it here: http://www.majorgeeks.com/Norton_Removal_Tool_SymNRT_d4749.html You should probably also run a registry cleaner. CCleaner has proven itself both safe and effective; run both the disk cleaner and the registry cleaner using default settings and be sure to save the reg when prompted by CCleaner (just in case ). You'll be required to reboot after SymNRT (if it runs), and you should probably reboot after CCleaner. Then retry your installation. Download CCleaner from here: http://www.majorgeeks.com/CCleaner_Slim_No_Toolbar_d4191.html

....and Welcome to Major Geeks! :major
 

2 more replies
Relevance 58.22%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 57.81%

Hello everyone. Hope you are all doing good today and able to beat the heat on this very hot day. I have this really old laptop HP Pavillion dv6000. Originally it came with Windows Vista installed back when Windows Vista was first released but eventually I upgraded the laptop to Windows 7. Everything was fine and working until recently where the laptop has no sound. I try to install the sound driver from the HP website and it says "driver installation failed: could not find the device for this driver." No matter what I do I cannot get sound on this laptop. If I go to YouTube and watch a video the video plays just fine but with no sound. When I click on the sound icon next to the time on the desktop bar a window pops up that says "troubleshooting has completed" Problems found: "Hardware changes might not have been detected." I am not sure what is up with this or how to fix it but any help is appreciated thanks.

Answer:It says "driver installation failed could not find the device for this driver"

A Vista laptop likely doesn't have Win7 drivers written...try re-installing the originals from the Driver CD and reboot...Plus it's likely you are trying nVidia or AMD drivers gettin it to work which is a no-no on a laptop....

6 more replies
Relevance 57.4%

Hello i keep getting the same symptoms as everything(black screen followed by the igfx message) and frequent bsod. I have already ran everything in the virus, malware department, cleaned my system and even tried a system restore. I have updated all drivers(I have the intel chipset family graphics driver)

Heres some specs, if you need something else, let me know.

OS Name Microsoft? Windows Vista™ Home Premium
Version 6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TAMMY-PC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv4 Notebook PC
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.42, 5/14/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.18005"
User Name Tammy-PC\Tammy
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.90 GB
Available Physical Memory 2.13 GB
Total Virtual Memory 7.98 GB
Available Virtual Memory 5.96 GB
Page File Space 4.20 GB
Page File C:\pagefile.sys

The last time i got the blue screen of death and rebooted, it showed me this error message from windows.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 103... Read more

Answer:Device driver igfx has failed or recovered.(And i dont play online games)

Hello and welcome to the forum and I am sorry you are having system problems, start with this and someone who is an expert in BSOD will get back to you.


BSOD - Debugging a BSOD in Vista

BSOD with netio.sys or ndis.sys - Fix

1 more replies
Relevance 55.76%

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

More replies
Relevance 53.71%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Relevance 53.71%

I formatted my computer, installed winxp sp2 and the driver for my multimedia device was lost, i ran everest to check what it was and its SiS 7012 audio device, an odd thing was when it said my motherboard name is unknown, its a laptop.
I downloaded different drivers but non of them were succesful, i tried installing one and a failure error pop up, "failed to install driver for windows xp" (check link or thumbnail), i tried installing winme.exe for windows ME driver but it didnt work, tried changing install directories but didnt work either. i donwloaded drivers from SIS home page but didnt work either. please help, i am most concerned about my sound device rather than the mother board, here are my specs.

http://img211.imageshack.us/my.php?image=failed2wm.jpg

Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2600 MHz (13 x 200)
Motherboard Name Unknown
Motherboard Chipset SiS 648FX
System Memory 512 MB (PC2700 DDR SDRAM)
BIOS Type AMI (01/12/04)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter ATI Mobility Radeon 9600/9700 (M10/M11)
3D Accelerator ATI Mobility Radeon 9600/9700 (M10/M11)
Multimedia:
Audio Adapter SiS 7012 Audio Device
Storage:
IDE Controller SiS PCI IDE Controller
Disk Drive TOSHIBA MK602... Read more

Answer:SiS 7012 audio device "failed to install driver for Windows XP"

Hello and welcome to Techspot.

Go to your laptop manufacturers website. You should be able to get your drivers there.

Regards Howard :wave: :wave:
 

14 more replies
Relevance 53.71%

I have a Yiynova tablet monitor and its been working fine for about a month. I recently tried to download the beta version of a NVIDIA GeForce update (bad idea) and had to reinstall a previous version. After that, things started to go south for my tablet.

I uninstalled and reinstalled the tablet driver, and tried to plug it in a different USB port and it came up with the same message.

Is there a step that I'm missing?

I have dual screen setup, and that's working fine, but the driver that senses the pen just isn't installing, even though I installed the driver program.

I appreciate any ideas on how to fix this.

Answer:Yiynova tablet monitor "device driver failed to install"

The problem wasn't solved, but I believed I narrowed down the problem. The driver doesn't seem to fully install.

1 more replies
Relevance 53.71%

Greetings all.

I monitor installation of apps with Systrace and Comodo Programs Manager. Using the latter, which includes the ability to uninstall Drivers, I've encountered a disastrous problem:
Specs:
Dell Inspiron 1525 laptop
Intel 2 x 2.0GHz, 8GB DDR2, 320GB 7200 HDD (20+GB free)
Windows 7 Ultimate 64bit, fully patched, updated and maintained
Norton IS 2012, Malwarebytes, Mamutu, Windows Firewall (regularly run Kaspersky, ESET, etc., scanners offline. No malware.)
Have 350+ third-party apps installed for reference, testing and troubleshooting others' computers.

Problem: Using Comodo Programs Manager (CPM) I uninstalled Windows Mobile 2003 Device Driver which required a reboot to complete and, now, I cannot boot the system. The Windows logon screen appears, a message displays, saying CPM's "Force delete jobs completing...". The system freezes there with a black screen, the mouse cursor responds but there is no other activity. Even the LED showing HDD activity ceases.

Attempted solutions:
-- Safe Mode(s), Last Known Good Config, etc., Startup Repair, (System Restore has been disabled.) To make matters worse, I carelessly began to run Windws 7 installation repair as though it was XP. Before I caught the mistake and cancelled, 7 had already begun to copy files. Now I have the SystemRoot as "windows\windows".
-- BCD rebuild successful but still have the "windows\windows".
-- SFC starts but will not complete from Windows RE Comm... Read more

Answer:Failed device-driver uninstall with "forcedelete" loop

"Have 350+ third-party apps installed for reference, testing and troubleshooting others' computers"... You should keep these on a separate hard drive or on an optical disk, but you actually know this already don't you You computer should be set up to easily reloaded as mine is, in case of a "disastrous problem" like you are having now. There's really no excuse
 

9 more replies
Relevance 53.3%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 50.84%

I am tying to sync my Samsung Galaxy J7Sky Pro phone with my computer using Samsung Smart Switch Program.
When I start the Smart Switch Program and plug in the USB cable from the phone to the computer USB port, the device driver for the phone does not install properly or recognize the phone, as depicted by a yellow exclaimation point for the Galaxy J7 Sky Pro
device driver and AMDA00 interface under system devices.
I tried reinstalling the Samsung phone device driver but still get the above exclaimation for these drivers.
I then shut down and restarted the Samsung phone and the drivers reinstalled properly and the Smart Switch Program worked. 

My issue is that the next time I restarted my computer, I get the same device driver errors.
Is there some way to prevent having to restart and reinstall the device drivers each time I want to sync my phone using the Smart Switch program? 
Same issue used to happen with my Samsung Galaxy SIII phone, before I upgraded to the Samsung Galaxy J7 Sky Pro.
It is a real pain in the neck and time waster.

More replies
Relevance 50.84%

Only bought Yoga 2 Pro for few days and start to have bluetooth issue where intermitten disconnection with my logitech M557 bluetooth mouse and now is totally failed with Unknown USB Device. Tried download and re-install new bluetooth driver from Lenovo Support Site but still shown as Unknown USB Device. Pls help!

Answer:Yoga 2 Pro Bluetooth - Unknown USB Device (Device Descriptor Request Failed)

Same issue,  been a problem since I purchased last Christmas.  Sometimes I want to throw this piece of crap out and buy a mac.  Lenovo, get your head out of your ass.

1 more replies
Relevance 50.84%

hey, im having problems with plugging in my mouse to any USB port, this just started around an hour ago. ive checked on the brand's website which carried no complaints on problems like this with the same mouse. tried pretty much everything, even looking
it up on youtube and forums... Nothing has worked, worser still, i got it for christmas and its stopped working, ive looked though the device manager too. Please try and help me, if u can. I use Razer Naga Waith Red if that helps

thanks,
onyx

Answer:Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Hi onyx,
This error means a device driver notified the operating system that the device failed. This circumstance can occur if the device hardware fails or if the device driver fails.
Have you tried to update the device driver for test?
Please follow this guide trying t resolve this issue:
Code 43: Windows has stopped this device because it has reported problems
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspxKaren Hu
TechNet Community Support

2 more replies
Relevance 50.84%

I was just working happily when my Microsoft Bluetooth Mouse just suddenly stopped working.
The Bluetooth settings page says "Bluetooth is turned off" and there are no options on the settings page or the system tray to turn Bluetooth on.
The Device Manager now has "Unknown USB device - device descriptor request failed" where it did not before.
Other devices all seem to be working fine - USB devices plugged in are being recognized and work properly. Only BT seems to be broken.
I've tried:
uninstalling the device and rebooting
installing the latest updated chipset drivers from the dell website
windows updates
pretty much all of the advice here: http ://troubleshooter.xyz/wiki/fix-usb-device-not-recognized-device-descriptor-request-failed

Any other ideas?
Thanks

Answer:XPS 15 9550 Bluetooth stopped working (Unknown USB device - device descriptor request failed)

So in desperation I just went into BIOS settings to see if there are any BT settings that may have become disabled. I didn't see any, and I didn't change any other settings.
After rebooting, BT and my mouse is now working again.
Something seems to be really flaky here, but hopefully this will help others with the same issue.

1 more replies
Relevance 50.84%

Since a day or two I get this error in my Lenovo Solution center.I've tried to update the driver, but that failed.The G710 is running W8.1 Any solution available?best regards Piet.

Answer:G710 Unknown USB-device (Device Descriptor Request Failed)

Hi Piet_Bos,
 
Welcome to the Forums    
    
As per the query we understood that you are facing issue  with error in USB device in your Lenovo G710 laptop.
 

Unplug all USB peripherals connected on the machine
Run Windows Update to get the latest patch and bug fixes (reboot if necessary) and try the USB devices.

If still the issue persists then please follow the below steps:-

Go to start button right click on my computer.
Select properties in left upper corner you have 4 options select ?advance system settings? option.

3.System properties pop up comes under that select hardware option and select device installation settings and disable the auto driver download option and select save changes and restart the system.
 

Now try to update the driver and check for the issue.

Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                              ... Read more

2 more replies
Relevance 50.84%

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

Answer:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

2 more replies
Relevance 50.84%

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

Answer:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

1 more replies
Relevance 50.43%

We have some symbol windows mobile-based handheld devices that we use in our business.  We connect these devices to our computers to copy files to.  This all worked fine until recently the devices come up as failed.
It appears in device manager with a yellow exclamation point.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.  (Code 19)
I've tried all the solutions I can find on the web and none of them work.
Including:
Uninstall the device in device manager and scan for changes.  It downloads the driver from windows-update and returns to code 19.
Tried hardware troubleshooter which basically seems to automate the process of uninstalling and scanning.
I've tried removing windows media player 12 feature and adding it back.
I've tried deleting USB controllers from Device Manager and rebooting, it re-detects them all and still gets code 19 on the device.
I've tried deleting upper and lower filter values in the registry which I found out later is mainly for CD/DVD devices, that didn't fix anything.
I've tried removing and re-installing Windows Mobile Device Center and driver pack and that did not fix it either.
Additionally Canon Powershot camera gives us similar results.  MTP USB Device failed.  
This is so far happening on 3 of our workstations that we know of.
At first we thought it was due to windows updates but nothing recent has been installed that looks rela... Read more

Answer:SOLVED:Windows Mobile-based device and Canon Powershot cameras showing code 19 and MTP USB Device failed.

Hi,

 

Thanks for posting in Microsoft TechNet forums.

 

Do you have Kaspersky installed? Kaspersky Filter driver caused that any USB device could not connect.

 

It is suggested to have a look at the following registry. Make a backup of it and remove the Upperfilters setting:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{EEC5AD98-8080-425F-922A-DABF3DE3F69A}

“Upperfilters” = klfltdrv

 

If the issue persists, please find a working machine and compare the registry settings.

 

Best Regards

Magon Liu

TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]

 
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

13 more replies
Relevance 50.43%

hello    i'm an embedded developer. i have an usb type ic programmer to burn microcontroller. now i'm getting this error "Unknown USB Device(Device Descripter Request Failed)" while plug my usb programmer into my pc socket. but this same hardware support in my friend same hp430 pc.

More replies
Relevance 50.43%

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

More replies
Relevance 50.43%

Im running windows 10 on an HP laptop, 64 bit, and i just got a micro usb to usb device so i can transfer stuff onto my phone. It worked when i first got it but now it comes up with a Device Descriptor Request Failed and a Code 43 error. Ive tried updating
the drivers, restarting my laptop, and plugging it into different usb ports but it still comes up with the error. Any suggestions? 

More replies
Relevance 50.43%

Turned on phone and said to plug into computer with USB and open Hisuite.  Is it an app that i can download and also how do i get the computer to recognize the phone?

More replies
Relevance 50.43%

My computer keeps telling me Unknown USB Device (Device Descriptor Request Failed), so I looked up how to fix it and they told me to uninstall it then scan for hardware changes and it will reappear working properly. Only it did not come back working properly, it came back the same. I am also 98% sure that this "unknown USB device" is my built-in webcam that has never once worked. So if someone wants to help me out and allow me to use my webcam that would be great!

Answer:Unknown USB Device (Device Descriptor Request Failed)

Hi there, can you first tell us what is the Name and Model number of your system?

What OS are you running

im sorry if you already listed this, as I cannot see your specs from the Windows Forum App..

I take it this is a laptop?

13 more replies
Relevance 50.43%

I know that a similar question has been asked before but, not with the last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
My question is; has anyone heard of Windows 8.1 having driver WHQL problems?? Very.

Any/all ideas, appreciated.

ps, I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.

Answer:Unknown USB Device (Device Descriptor Request Failed)

Is there only one USB port on the right hand side? Sometimes manufacturers connect internal devices via an unused USB port internally. USB ports are usually in groups of two, seeing only one port is usually a sign that the wiring has been redirected internally to something else like a Bluetooth adapter or wifi adapter. It may even be a card reader or touchpad. Is anything like that not working? If it is start looking for a driver for it.

19 more replies
Relevance 50.43%

Hi, i am having weird problem on windows 10. i fresh installed today and was installing drivers and other softwares. i couldnt set fingerprint because it says biometric device is not enabled. then i realized this error code : 43 . i dont know if it s related with fingerprint or not. also i installed old driver of integrated webcam in compatible mode win 7. i dont know if it caused this problem either. any help please?





ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800p / Dual boot Win10 Pro x64 - Ubuntu 16.04 LTS 64bit + X200 Ultrabase + ThinkVision LT2252p









Solved!

Go to Solution.

Answer:Unknown USB Device (Device Descriptor Request Failed)

Done!it was Fingerprint. fingerprint socket was unplugged. after i re-plugged the socket windows recognized biometric device. then i installed thinkpad fingerprint driver 6.0, all worked fine. there is no unknown usb device anymore. regards, 





ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800p / Dual boot Win10 Pro x64 - Ubuntu 16.04 LTS 64bit + X200 Ultrabase + ThinkVision LT2252p

1 more replies
Relevance 50.43%

I have bought a new windows 8.1 Toshiba laptop when I connect my external hard drive witch was working ok before it's telling me - unknown usb device (device descriptor request failed) code 43

Answer:unknown usb device (device descriptor request failed)

did you try to go to power manager, shut off usb power saving

17 more replies
Relevance 50.43%

Hey
1.)So my mouse(Corsair Harpoon RGB) was recently just working fine until one night i unplugged it and put it into computer and on that computer it didnt work so i went back to my laptop to plug it in there, but it showed the same problem it didnt respond the logo didn't light up so i went to the device manager and it said *title. So how do i fix this is there something with my mouse is there something with my software?
Oh yea and on top of that i have 2 more issues that i jut can't solve by myself.

2.) Unknown USB-device(port reset failed)
3.)DVD Drive(optical drive) doesnt show up on the device manager but it sounds like it's working and it opens and closes.
4.)Front ports of my PC doesnt work if i plug an USB in it doesnt do anything (it does work perfectly in the back)

I don't know though if i should make more threads but they somewhat relate to each other,
that's why they are just in 1 thread. If you need to ask any question, need pictures , my specifications or anything else just ask me.
Thanks in advance!
Best regards Hao.
 

More replies
Relevance 50.43%

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

Answer:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

9 more replies
Relevance 50.43%

I am running the Lenovo Ideapad y510p (the GT755m SLI version). I had my USB mouse and my flash drive connected to the 2x 3.0 USB ports (the ones on the left), everything was fine until suddenly both of them stopped working. When I try connecting the flash drive nothing happens, however, when I try connecting the USB mouse it says Unknown USB device (Device Descriptor Request Failed) in the device manager, windows error message "USB Device not recognized" also pops up in the bottom right corner. When I try connecting either of them (the mouse of the flash drive) to the 3rd USB port (the usb 2.0 port) they both work perfectly fine without any errors at all. I would like to know what may have caused that error and if there is any solution at all. Thanks in advance, Mersif.

Answer:Unknown USB device (Device Descriptor Request Failed)

Still looking for a solution.

3 more replies
Relevance 50.43%

When my girlfriend connects external USB device to any of the USB ports on Windows 10 Home she gets message:
USB Device Not Recognized.
She can not charge USB device via USB port.
I went to device manager and under USB Controllers I see following:
Unknown USB Device ( Device Descriptor Request Failed).
I tried some tricks I googled for this message but none of them returned result.
She didn't get any of the drivers with this device which needs to charge.
What should I do to be able to charge this device via USB?

Answer:USB Device Not Recognized Device Descriptor Request Failed

Try the device on a different USB port. This will figure out if problem is caused by a broken port.
Connect the device to another PC. This will figure out if the external device has problem.

Open Device Manager and expand category Universal Serial Bus Controllers and locate the USB device which is not being recognized by Windows.

Right-click on the device and select Uninstall from the context menu.

After finishing the uninstallation, restart your PC then Windows will reinstall the device automatically.

The problem can be caused by faulty USB driver. In this case, updating driver would fix the problem.

Obtaining Hardware ID's to help Identify Hardware
- Go to Start and type in "devmgmt.msc" (without the quotes) and press Enter
- Expand the "Unknown USB Device" category by clicking on the + sign to the left of it
- Right click on the "Unknown device" (if there's more than one, do this for all of them) and select Properties.
- Then select the Details tab.
- In the dropdown box, select "Hardware IDs" - and match the info to one of the following descriptions:
- - If the Hardware IDs description contains VEN_ and DEV_, then let us know the 4 characters immediately after the VEN_ and the 4 characters immediately after the DEV_
this is a PCI device and we'll look up the information at http://www.pcidatabase.com
- - If the Hardware IDs description contains VID_ and PID_, then let us know the 4 characters immediately after the VID_ an... Read more

2 more replies
Relevance 50.43%

I have had the Microsoft Wireless 2000 Keyboard and mouse for 10 months and it has been working fine. But recently when I plugged it in I got an error message which said :The last USB Device you connected to this computer malfunctioned. and Windows does
not recognize it.
I opened Devices and Printers and it said Unknown USB Device (Device Descriptor Request Failed).

Also it is on Windows 10 Home

More replies
Relevance 50.43%

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

Answer:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

6 more replies
Relevance 50.43%

After i updated my Lenovo G580 20150 to Win 8.1 all 3 USB ports stopped working. Now i can't use any USB device (Mouse, Flash drive, portable HDD etc, all working on my other Win8 computers). Below are some screen shots for further information.Please help to resolve this issue.

Answer:Unknown USB device (Device Descriptor Request Failed)

hi kmugal,
 
Welcome to the Lenovo Forums
 
The issue that your having is most likely the one discussed in this article.
 
If you have tried the USB 3.0 (x2) and USB 2.0 (x1) ports with the same issue, consider the following:
1. Unplug all USB peripherals connected on the machine
2. Run Windows Update to get the latest patch and bug fixes (reboot if necessary) and try the USB devices.
 
If the problem remains, consider going back to Windows 8 by doing a Refresh or Reset to isolate any issues on the OS level.
 
 
Regards

1 more replies
Relevance 50.43%

I HAVE TRIED THE WAY THAT HAS BIN SUGGESTION WITH NO LUCK
\_SB.PCI0.OHC1.RHUB.PRT2- BIOS DEVICE NAME
PROVIDER-MICROSOFT
IF YOU NEED MORE INF JUST ASK
PLEASE HELP

More replies
Relevance 50.43%

Can any help with this problem? Have a Pavilion G6 with no USB 3.0 as I am aware. USB (3 ports) not working.However, when the plugged the mobile, the mobile does get charged. Device Manager shows "Unknown USB Device (Device Descriptor Request Failed)".   Running Windows 10 64 bit. Tried everything like uninstalling, updating etc as the information on the internet. Also, updated the drivers using Driver Easy but still getting the error. Any suggests, please? Thanks in advance. Sanil Sukumaran.

More replies
Relevance 50.43%

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

EDIT: The problem is the motherboard. The computer was checked at a computer service, and it seems the time has come for it to be buried.

Answer:Unknown USB Device ( Device Descriptior Request Failed )

Hi Rostos and welcome to Ten Forums!

I would recommend two utilities. Maybe they can reveal what's going on.

USB Device tree viewer from Uwe Sieber and Nirsoft's USBDeview. They will give you info about connected devices..

32 more replies
Relevance 50.43%

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

Answer:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

8 more replies
Relevance 50.43%

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

Answer:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

1 more replies
Relevance 49.61%

i have acer e1-571 notebook.running windows 10.from last few days my pc giving this error-Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

A request for the USB device descriptor failed.                                                            
                                                                i have tried all kind of suggestions
given by microsoft related this problem .but   cant solved.card reader ,pen drive ,external keyboard ,or external mouse no one working.2.some  random  keys  is not working .please fix my issue .

More replies
Relevance 49.2%

I was tried to update Bios to 1.12 but not successed..It always came out this message " Driver Loading Failed. The Utility cannot proceed."..I tried to update under safe mode, still not work..I tried to use Winflash, it came out "Cannot open new BIOS file"..There's only one method that I didn't try is that burn a ISO CD and connect to External CDROM.. but I don't have External CDROM..The reason that I update Bios is that I want to install Toolbox; otherwise, I won't take this risk..For futhermore information click following link..http://forums.lenovo.com/t5/ThinkVantage-Technologies/This-version-of-Lenovo-ThinkVantage-Toolboox-i...

Answer:X120e update BIOS failed "Driver Loading Failed. The Utility cannot proceed"

Sounds like something wonky with your Windows install. I'd avoid doing a BIOS update through such an install.

4 more replies
Relevance 49.2%

Hello:
 
Windows 7 has been failing to boot and when I ran a startup repair, I got the following:
 
Problem signature:
  Problem Event Name: StartupRepairOffline
  Problem Signature 01: 6.1.7600.16385
  Problem Signature 02: 6.1.7600.16385
  Problem Signature 03: unknown
  Problem Signature 04: 21199678
  Problem Signature 05: AutoFailover
  Problem Signature 06: 11
  Problem Signature 07: BadDriver
  OS Version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
 
No new devices have been added to this computer recently. Problem first started with extremely long boot time into Windows 7.
 
FRST Report shows:
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:14-12-2015
Ran by SYSTEM on MININT-DP87NLO (14-12-2015 14:40:50)
Running from g:\
Platform: Windows 7 Professional Service Pack 1 (X64) Language: English (United States)
Internet Explorer Version 10
Boot Mode: Recovery
Default: ControlSet001
ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.
 
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Registry (Whitelisted) ===========================
 
(If an entry is included in the fixlist, the registry item will be restored to default or removed. The file will not be moved.)
 
HKLM\...\Run: [RTHDVCPL] => C:\P... Read more

More replies
Relevance 47.97%

I've spent 3 hours trying to find the drivers for this. Looked online, any gurus help me please? Ran ThinkVantage updates, Irks me it doesn't find it automatically.  I have a t520. if it's an update for the AMT, i cna't find it on the drivers pages, and lenovo removed direct links from URL's, so I don't know where to go from here.

Answer:Can't find driver. PCI Simple Communicatoins Driver and PCI Serial Port Driver in device manager.

http://support.lenovo.com/en_US/downloads/default.page?

3 more replies
Relevance 47.56%

I'm experiencing slim keyboard not being recognized in the Windows 8.1
The keyboard was working fine until just one day it just stopped working.
I tried factory reset literally 8 times along with most recent BIOS update and dell's recommended update software. + power setting --> disabling power saving on USB
It still come up as unrecognized each time even with fresh reinstall.
I was wondering if this is a hardware issue or just software bug from factory reset.
I don't think there is a available driver for this kind of problem is there?

Log Name:      Microsoft-Windows-Kernel-PnP/ConfigurationSource:        Microsoft-Windows-Kernel-PnPDate:          8/6/2016 1:09:35 PMEvent ID:      411Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      DellDescription:Device USB\VID_0000&PID_0002\5&1347b1a9&0&4 had a problem starting.
Driver Name: usb.infClass Guid: {36fc9e60-c465-11cf-8056-444553540000}Service: Lower Filters: Upper Filters: Problem: 0x2BStatus: 0x0
 

More replies
Relevance 47.15%

Looking through MSINFO32 I see the line: Device Encryption Support Reasons for failed automatic device encryption: Un-allowed DMA capable bus/device(s) detected What does it mean? My laptop C:\ drive is encrypted the whole thing. Does this mean I have a problem? I have these lines too: Secure Boot State On PCR7 Configuration Bound

System Information report written at: 09/22/17 20:02:42System Name: DESKTOP-4PCRIDJ[System Summary]
Item Value OS Name Microsoft Windows 10 Pro Version 10.0.15063 Build 15063 Other OS Description  Not Available OS Manufacturer Microsoft Corporation System Name DESKTOP-4PCRIDJ System Manufacturer Dell Inc. System Model XPS 15 9560 System Type x64-based PC System SKU 07BE Processor Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz, 2801 Mhz, 4 Core(s), 8 Logical Processor(s) BIOS Version/Date Dell Inc. 1.5.0, 8/30/2017 SMBIOS Version 3.0 Embedded Controller Version 255.255 BIOS Mode UEFI BaseBoard Manufacturer Dell Inc. BaseBoard Model Not Available BaseBoard Name Base Board Platform Role Mobile Secure Boot State On PCR7 Configuration Bound Windows Directory C:\WINDOWS System Directory C:\WINDOWS\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "10.... Read more

More replies
Relevance 45.92%

The AUDIO FADE PROBLEM is an issue with this laptop and I am wondering if it is related to the above.
I have upgraded to the latest BIOS and drivers using the Dell Product Support pages.
Every other day I have to reinstall the Realtek Audio Device to get audio from streaming media.
The current Driver Version is 6.0.1.7908 from Realtek Semiconductor Corp. Date 12/08/2016 which is what it defaults to upon reinstall.
I suspect that for whatever reason Dell has not yet come up with a fix. Has it something to do with the fact that although I bought the laptop new, it had been upgraded from Windows 8 to 10? (A fact that I only discovered later)
 

Answer:Inspiron 13 5368 2-in-1 High Definition Audio Device in Device Manager - no available driver

There are a couple of suggestions about the fading issue in the Recent Issues FAQ, under Inspiron 5368.

1 more replies
Relevance 45.92%

Okay add to the questions... when i first start my computer up now it says add new hardware and it says something like its searching...... for USB Imaging Device, windows was unable to locate driver for this device..whats this mean?? how do i fix this? I right clicked on my computer, properties, Device manger..there is a yellow ? beside other Devices the the little thing that comes below it has a yellow ? with(!) over it. USB Imaging Device..whats all this mean??? does it have anything to do with why i can install my new modem?
thanks much
Leigh
 

Answer:USB Imaging Device, windows was unable to locate driver for this device..whats this m

At some stage recently you have placed a new scanner/digital camera, or the likes of, in your computer. Windows hasn't been able to apply a driver to that device and so it asks you if you want to connect to the internet to try and find a matching driver on the microsoft web site. The problem is easily solved. If you still have the device connected and plan on using it, then grab the CD that came with it and follow the installation instructions on it. If you don't have it connected then go back to the 'my computer' 'properties' into 'device manager'. In there disable the imaging device that has the yellow ! next to it. And hopefully next time you restart, no more problem.
 

1 more replies
Relevance 45.92%

Hi,
I sporadically gets the "USB Device Not Recognized Device Descriptor Request Failed"; however, while I have 6 USB devices connected, none of them seem to be the cause of the error. When I use devmgmt.msc to get the Hardware Ids, the value is simply "USB\DEVICE_DESCRIPTOR_FAILURE". I use TARGET software to control two joysticks and a rudder. (Besides these three USB devices I have a keyboard, a mouse and a TrackIR 5). In some instances everything works even though I got the error but in others instances none of the joysticks are working as expected. Sometimes restarting the computer helps or uninstalling the "mystic" USB device, however the problem always reappear and I would really like to get rid of it permanently.
Anyone got some idea what could be causing this?
I have updated all drivers but it did not help.
Thanks,
Klaus

More replies
Relevance 45.92%

So anyone got any ideas for this issue? It seems as if though its not hardware related and more driver/software related. I've put my cpu at stock settings underclocked my graphics card changed ram timings and this is a new set of sticks since i replaced them following someones post saying that that was their issue so gave it a try but apparently it isn't go in safe mode uninstall drivers run driver sweep reboot reinstall nothing problem persists and yes i do have the latest mobo/vid drivers.

[CPU] Intel? Core? i7 CPU 920 @ 2.67GHz (8 CPUs), Overclocked~4.2GHz
[RAM] 6GB Corsair Dominator DDR3 1600 Triple channel
[MOBO] Asus Rampage II Extreme X58
[GPU] GTX 285 SSC X2 SLI 740/1660/2800
[HDD] WD Velociraptor 300GB x2 raid 0 stripe
[PSU] Corsair 1000HX
[SC] X-FI Titanium
[Case] Lian Li PC-P80
[OS] Windows Vista? Ultimate SP1

Everything looks in order?

More replies
Relevance 45.92%

I need assistance finding the drivers for my elitebook 8570w.  Hardware ids are attached.  Please help thanks

More replies
Relevance 45.92%

Hello,
My integrated speakers and audio port do not seem to be working. It happened after I was playing around with bluetooth trying to get that to work. Now only bluetooth is able to connect. 
So far I have tried:
System restore
Deleting and redownloading audio drivers
Adding legacy hardware for Realtek
ePSA test was able to hear the tones
The audio logo has a red X through it and only the bluetooth headphones drivers appear in device manager. Any ideas what might be the issue and how to solve them? 

More replies
Relevance 45.92%

Not sure which forum category I should use, thus using software (for Driver Problems).  Various times to fix a device you can go into Device Manager  and uninstall the driver, go to top of page click on Actions and click on Search For New Devices.  I am under the impression this will uninstall the device driver, then reinstall the exact same driver (code).  Why does this work?  It appears that the exact same code is now reinstalled and many times fixes a problem.  I have used this technique on mouse driver, internet driver, keyboard driver.  THis is a good and easy first process to try and make a quick fix.
 
Again, I am just trying to figure out why it works - I know I am missing something.  As an ex-programmer trying to figure out why the same code now will work when it had stopped working.
 
Why or under what circumstances does the driver code stop working, and then why does a reinstall of it at times lets it start working again.

Answer:Why Does Uninstall / Reinstall a Device Driver via Device Manager Fix Problems

The drivers can become corrupted, which is why a re-install will fix the problems.As to how they get corrupted, that's anyone's guess...

1 more replies
Relevance 45.92%

I have an old Western Digital drive that came with Dell Inspiron One 2305 and replaced it after 5 years. There are some files I need from it now and I'm trying to connect via usb to sata. The WD volume does not show up. I got to device manager and found it listed in in unknown devices and it needs a driver to install. Where do I go to find the driver. Western digital site basically said that I need to go to the manufactures webstie (dell) for the driver but once im on dell i see nothing that hints at a Western Digital Driver. Here is the Wester Digital info from there site
Here is Dell Website of the model I use drivers section[/B]

Dell Inspiron One 2305 Drivers Download for Windows 7, 8, XP, Vista

EDIT****

I think I found it, would it in fact be this driver . It is listed on the availale drivers for the model I have after entering my express service code. I assume it is but would feel better if someone could confirm this to be true.

Western Digital WD2500AALX/WD3200AALX/WD5000AALX/WD10EALX 3.5 7200 RPM SATA3.0 Firmware UpdateView details
R313263.exe | Hard-Drive (1 MB)

Answer:WD SES Device USB Device driver not found from old internal hard drive

could installing that drivers mess up my computer. I'm using another similar Hard drive.

5 more replies
Relevance 45.92%

Hello!

So I did some searching for a way to fix this problem but I believe that my problem is different than the Bluetooth Peripheral Device problem that most people have.

I am NOT trying to connect a cell phone to my laptop. I am not trying to connect anything I don't think (unless my bluetooth mouse counts?).

I have no idea what a Bluetooth Peripheral Device is. I took some screenshots of the messages I receive every time a wake my computer up or turn it on. (1st, smaller picture)

It tries to update a driver but always fails and gives me this. (2nd, larger picture)

The suggestion my laptop gives me is this

There may be an easy solution to this, but I feel really lost right now.

Thanks in advance!

Answer:Bluetooth Peripheral Device Driver Device Unplugged/Not Found

Welcome to SF.

Go to Dell Support
Welcome to Dell Technical Support

Select drivers

Choose whichever option you want to located your 1555 notebook.

Select network
Select Dell Application R226750.exe
This applies to the Wireless 370 mini bluetooth card

And yes, your bluetooth mouse would be a bluetooth peripheral.

Let us know how that goes for you.

5 more replies
Relevance 45.92%

Hello all, first say that my English is very bad.My sister bought a Lenovo G560 laptop that had Windows 7 operating system. She asked me to change the operating system because she likes most Windows XP.I installed Windows XP normally. all good, but the audio driver is given on this page does not work. I've searched around the internet and I could not find the driver. According toEverest, the driver is "Conexant Cx20585".Please, I need your help, I'm going crazy and I did not concentrate on my studies for this.pleaseeee!!for more information, the error when installing the driver on this page is this:Failure to install the driver: Could not find the device for this driver(In Spanish: fallo en la instalación del controlador: No fue posible encontrar el dispositivo para este controlador)













Solved!

Go to Solution.

Answer:Failed installation of audio driver for Windows XP. Lenovo G560. Driver --> (Conexant Cx20585)

Hi Jose_Galdos,
 
 
That's listed as the Conexant Pebble High Definition Smart Audio.
Seeing as how it's HD sound, I think you'll need to load the Microsoft UAA driver first to get it running under XP.
 
Is  this the driver that you tried to install?
 
Dave

7 more replies
Relevance 45.51%

Hi,
I have a USB device (lets say XXX) and its driver. It has one configuration and one interface (interface value = 0).
Now I have updated this device to be a composite device by adding another interface (interface value = 1). For this:
I have modified device class, subclass and protocol as 0x0.
I have provided different PID (otherwise, composite driver is not loaded).
When I connect this modified device, I see that composite driver is associated and shown as two two devices in device manager. I have disabled the other device with MI_01. For MI_00, I want to use XXX driver. So I uploaded the driver by pointing to XXX driver
for MI_00. When I tried this, I got this error:This device cannot start. (Code 10).
Please let me know if I have to do any modifications to XXX driver INF file. Infact, I tried updating INF to specify same .sys file for new PID and MI_00 (and created cat file using Inf2Cat). Then I get this error: A problem was encountered while attempting
to add the driver to the store.
Please let me know if its possible to re-use XXX driver without any modifications (except for possible changes to INF file) as this driver is from 3rd party.
Rgds,
Venkat.

More replies
Relevance 45.51%

I have 2 Aspire One netbooks, both worked fine a major crash. I installed a newer xp with SP3 and all the drivers from Acers download site for my netbook by serial number. After everything appeared to be working fine I made an image and cloned the other netbook. Now when opening a youtube item the video closes and I puts up an error message about device configuration When I open my control panel and look at sounds it states that "No Audio Device is found" Under device manager I have a PCI device not configuring and have pinned it down to "PCI\VEN_8086&DEV_27D8&SUBSYS_015B1025&REV_02\3&B1BFB68&0&D8" I believe the sound device issue or pci issue are related and causing youtube video to error out. I checked the bios versions tonight and the computer has the latest bios. Any advice? Thanks......... My wife uses her netbook all the time that's why in need to get it working again. My netbook sits sits most of the time until I travel. I have a 15" aspire I normally use.













Solved!

Go to Solution.

Answer:Audio Device notfound & PCI Device driver issue on...

Ok, checking better the HardwareIDs, appears to be the high definition microsoft audio device. Microsoft patch is required before any of the HD device drivers are installed, but the patch will only go on windows  XP SP2 computers.Refer the link: http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=888111&kbln=en-us Open the device manger by typing the command devmgmt.msc. Select sound, Video and game controllers.If any driver installed uninstall it one by one.Open the registry editor and browse the following locationHKLM\SYSTEM\CurrentControlSet\Control\Windows\Change the CSDVersion value to 200. Restart the computerDownload the Microsoft patch kb888111xpsp2.exeRefer the link: http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=888111&kbln=en-us After updating the patch install the the correct audio drivers for the system.Restart the computer.Open the registry editor again.Locate the HKLM\SYSTEM\CurrentControlSet\Control\Windows path and change the CSDVersion value to old one i.e 300.  Realtek audio drivers:http://global-download.acer.com/GDFiles/Driver/Audio/Audio_Realtek_5.10.0.6010_XPx86_A.zip?acerid=63...  

11 more replies
Relevance 45.51%

Had to reinstall Windows XP on a T42 (2372k3U). Got all drivers loaded but one. Says unknown device on Intel 82801DBM LPC Interface Controller (24cc). What the heck is this thing? I thought I loaded all available drivers. Help.

Answer:Can't find driver for unknown device in device manager on T42

that would be this chip set driver http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-46058





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

6 more replies
Relevance 44.69%

Recently had my computer crash and come up with this message. Went through the bios and discovered the hard disk was not being recognized. So I opened it up and unplugged/replugged it in. It is still giving me the same message and wanting me to boot from a network, but now in the bios it is recognizing the hard disk. Any other ideas?  Thanks a ton in advance for anyones help!!

Answer:Lenovo y50 failed to boot (default boot device missing or boot failed)

Hi Oldsm66 , 
 
Welcome to the Community Forums. 
You may want to check for the hard drive integrity .
If you have a spare harddrive to boot from or use a rescue USB drive to boot into and run diagnotics .
You can also try to back up your files from the original harddrive once booted from the rescue media if needed. 
 
Update us how it goes.
 
Regards 

1 more replies