Computer Support Forum

Cant run any program'unidentified program wants acess to ur computer'pops everytime

Question: Cant run any program'unidentified program wants acess to ur computer'pops everytime

Hi all. My problem started shortly after i downloaded some new nvidia game card drivers. after being istalled it asked to have pc rebooted. once i reboot at the screen right before administrator log in, the screen just stayed black and did nothing else. i ran the pc in safe mode to get rid off watever the pc caught with Mc Cafee and comcast spyware removal which did not hlep at all. i tried other things like checking memory for error and other things but nothing fixed the black screen problem at that point i was about to just reprogram the whole pc but of course i could not find and still cant find any of my pc disks. the only thing that worked temporarily was the system restore which only worked from the F8 boot. i set it for a day back it recovered everything everything worked fine til the next day after i start the pc and everything was loaded a message poped for permision "block or unblock" a program with a program name i did knew which was EA for some games i play. as soon as i did that my pc got messed up again, it boots fine i can go on the enternet but can not run any programs at all. i get this mesage evertime i try to."An unidentified program wants access to your computer" msdig.exe unidentified publisher Cacel or Allow which i press cacel everytime worried that it might just make my pc even worst. i also noticed that the name of the unidentified publisher changes everyime i boot the pc. even when i try to start my enternet explorer it asks for access i just x it and it starts my enternet but not any program. i also get another mesage when i try to open my enternet explorer or after i reboot my pc."iexplorer.exe Bad image C;\ Progra~1\manson\liser.dll is either not desingned to run on windows or it contains and error. try installing the program again using the original instalation media or contact your system administrator or the software vendor for support. i get another erorr message after i reboot my pc when desktop is loading, Desktop Could not load or run 'C;\Windossytem32\smljmm.exe' specified in the registry. make sure that file exists on your computer or remove the reference to it in the registry. i tried doing system restore again with the F8 boot but there arent any restore points to go back to. i waited a few days to see if it would create any but has not created any yet. oh and i tried doing mccaffe a few times in asfe mode which is the only way i can aceess limited programs but did not help any. Any knowledge will be appreciated Operating System= Windows Vista Premium. eMachines.

Relevance 100%
Preferred Solution: Cant run any program'unidentified program wants acess to ur computer'pops everytime

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Cant run any program'unidentified program wants acess to ur computer'pops everytime

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:23:22 PM, on 3/16/2010
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18385)
Boot mode: Normal
Running processes:
c:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\wbem\unsecapp.exe
C:\Program Files\Internet Explorer\ieuser.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\comcasttb\CIDGlobalLight.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Windows\system32\wuauclt.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Windows\system32\Macromed\Flash\FlashUtil10c.exe
C:\Users\Borikua Flava\Desktop\HijackThis exe.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://homepage.emachines.com/rdr.aspx?b=ACEW&l=0409&s=1&o=vp32&d=1208&m=et1161-07
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896" target="_blank" class="invilink">http://go.microsoft.com/fwlink/?LinkId=54896" target="_blank" class="invilink">http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.comcast.net/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://homepage.emachines.com/rdr.aspx?b=ACEW&l=0409&s=1&o=vp32&d=1208&m=et1161-07
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.comcast.net/
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = http://www.comcast.net/toolbar2.0/search/
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Window Title = Windows Internet Explorer provided by Comcast
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyServer = :0
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
R3 - Default URLSearchHook is missing
F3 - REG:win.ini: load=C:\Windows\system32\msituydk.exe
F3 - REG:win.ini: run=C:\Windows\system32\mssjk.exe
O2 - BHO: (no name) - {02478D38-C3F9-4efb-9B51-7695ECA05670} - (no file)
O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
O2 - BHO: WormRadar.com IESiteBlocker.NavFilter - {3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - (no file)
O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)
O2 - BHO: EmailBHO - {647FD14A-C4F1-46F4-8FC3-0B40F54226F7} - C:\Program Files\jZip\WebmailPlugin.dll
O2 - BHO: Comcast Toolbar - {79CEEA4E-C231-4614-9E3B-53B2A02F39B7} - C:\Program Files\comcasttb\comcastdx.dll
O2 - BHO: scriptproxy - {7DB2D5A0-7241-4E79-B68D-6309F01C5231} - C:\Program Files\McAfee\VirusScan\scriptsn.dll
O2 - BHO: Windows Live Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
O3 - Toolbar: Comcast Toolbar - {79CEEA4E-C231-4614-9E3B-53B2A02F39B7} - C:\Program Files\comcasttb\comcastdx.dll
O4 - HKLM\..\Run: [Windows Defender] %ProgramFiles%\Windows Defender\MSASCui.exe -hide
O4 - HKLM\..\Run: [RtHDVCpl] RtHDVCpl.exe
O4 - HKLM\..\Run: [Google Desktop Search] "C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe" /startup
O4 - HKLM\..\Run: [P2Go_Menu] "C:\Program Files\CyberLink\Power2Go\MUITransfer\MUIStartMenu.exe" "C:\Program Files\CyberLink\Power2Go" UpdateWithCreateOnce "SOFTWARE\CyberLink\Power2Go\6.0"
O4 - HKLM\..\Run: [WinampAgent] "C:\Program Files\Winamp\winampa.exe"
O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe"
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre6\bin\jusched.exe"
O4 - HKLM\..\Run: [ddoctorv2] "C:\Program Files\Comcast\Desktop Doctor\bin\sprtcmd.exe" /P ddoctorv2
O4 - HKLM\..\Run: [mcagent_exe] "C:\Program Files\McAfee.com\Agent\mcagent.exe" /runkey
O4 - HKLM\..\Run: [Skytel] Skytel.exe
O4 - HKLM\..\Run: [MRT] "C:\Windows\system32\MRT.exe" /R
O4 - HKLM\..\Run: [NvCplDaemon] RUNDLL32.EXE C:\Windows\system32\NvCpl.dll,NvStartup
O4 - HKLM\..\Run: [NvMediaCenter] RUNDLL32.EXE C:\Windows\system32\NvMcTray.dll,NvTaskbarInit
O4 - HKCU\..\Run: [WindowsWelcomeCenter] rundll32.exe oobefldr.dll,ShowWelcomeCenter
O4 - HKCU\..\Run: [DW6] "C:\Program Files\The Weather Channel FW\Desktop\DesktopWeather.exe"
O4 - HKCU\..\Run: [Aim6] "C:\Program Files\AIM6\aim6.exe" /d locale=en-US ee://aol/imApp
O4 - HKCU\..\Run: [ComcastAntispyClient] "C:\Program Files\comcasttb\ComcastSpywareScan\ComcastAntispy.exe" /hide
O4 - HKCU\..\Run: [EA Core] "C:\Program Files\Electronic Arts\EADM\Core.exe" -silent
O4 - HKCU\..\Run: [DAEMON Tools Lite] "C:\Program Files\DAEMON Tools Lite\daemon.exe" -autorun
O4 - HKCU\..\Run: [AdobeUpdater6] "C:\Program Files\Common Files\Adobe\Updater6\Adobe_Updater.exe"
O4 - HKCU\..\Run: [userinit] C:\Users\Borikua Flava\AppData\Roaming\sdra64.exe
O4 - HKCU\..\Run: [WMPNSCFG] C:\Program Files\Windows Media Player\WMPNSCFG.exe
O4 - HKLM\..\Policies\Explorer\Run: [exec] C:\Windows\system32\msaingw.exe
O4 - Startup: OneNote 2007 Screen Clipper and Launcher.lnk = C:\Program Files\Microsoft Office\Office12\ONENOTEM.EXE
O4 - Startup: OpenOffice.org 3.0.lnk = C:\Program Files\OpenOffice.org 3\program\quickstart.exe
O4 - Global Startup: BigFix.lnk = C:\Program Files\BigFix\bigfix.exe
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~2\Office12\EXCEL.EXE/3000
O9 - Extra button: Send to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~2\Office12\ONBttnIE.dll
O9 - Extra 'Tools' menuitem: S&end to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} - C:\PROGRA~1\MICROS~2\Office12\ONBttnIE.dll
O9 - Extra button: (no name) - {53F6FCCD-9E22-4d71-86EA-6E43136192AB} - (no file)
O9 - Extra button: (no name) - {925DAB62-F9AC-4221-806A-057BFB1014AA} - (no file)
O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\Office12\REFIEBAR.DLL
O13 - Gopher Prefix:
O16 - DPF: {2BC66F54-93A8-11D3-BEB6-00105AA9B6AE} (Symantec AntiVirus scanner) - http://security.symantec.com/sscv6/SharedContent/vc/bin/AvSniff.cab
O16 - DPF: {644E432F-49D3-41A1-8DD5-E099162EEEC5} (Symantec RuFSI Utility Class) - http://security.symantec.com/sscv6/SharedContent/common/bin/cabsa.cab
O20 - AppInit_DLLs: c:\windows\system32\lpkt.dll,c:\progra~1\Manson\liser.dll
O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - Agere Systems - C:\Windows\system32\agrsmsvc.exe
O23 - Service: Comcast AntiSpyware (AntiSpywareService) - Unknown owner - C:\Program Files\comcasttb\ComcastSpywareScan\ComcastAntiSpyService.exe
O23 - Service: Empowering Technology Service (ETService) - Unknown owner - C:\Program Files\EMACHINES\eMachines Recovery Management\Service\ETService.exe
O23 - Service: GameConsoleService - WildTangent, Inc. - C:\Program Files\eMachines Games\eMachines Game Console\GameConsoleService.exe
O23 - Service: getPlus(R) Helper - NOS Microsystems Ltd. - C:\Program Files\NOS\bin\getPlus_HelperSvc.exe
O23 - Service: Google Desktop Manager 5.7.808.7150 (GoogleDesktopManager-080708-050100) - Google - C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe
O23 - Service: Pest Patrol Realtime Service (ITMRTSVC) - CA, Inc. - C:\Program Files\CA\PPRT\bin\ITMRTSVC.exe
O23 - Service: McAfee Services (mcmscsvc) - McAfee, Inc. - C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
O23 - Service: McAfee Network Agent (McNASvc) - McAfee, Inc. - c:\PROGRA~1\COMMON~1\mcafee\mna\mcnasvc.exe
O23 - Service: McAfee Scanner (McODS) - McAfee, Inc. - C:\PROGRA~1\McAfee\VIRUSS~1\mcods.exe
O23 - Service: McAfee Proxy Service (McProxy) - McAfee, Inc. - c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exe
O23 - Service: McAfee Real-time Scanner (McShield) - McAfee, Inc. - C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
O23 - Service: McAfee SystemGuards (McSysmon) - McAfee, Inc. - C:\PROGRA~1\McAfee\VIRUSS~1\mcsysmon.exe
O23 - Service: McAfee Personal Firewall Service (MpfService) - McAfee, Inc. - C:\Program Files\McAfee\MPF\MPFSrv.exe
O23 - Service: Message Queuing Service (MSMQSVC) - Unknown owner - C:\Windows\system32\mqsv32.exe (file missing)
O23 - Service: NVIDIA Display Driver Service (nvsvc) - NVIDIA Corporation - C:\Windows\system32\nvvsvc.exe
O23 - Service: SupportSoft Sprocket Service (ddoctorv2) (sprtsvc_ddoctorv2) - SupportSoft, Inc. - C:\Program Files\Comcast\Desktop Doctor\bin\sprtsvc.exe
--
End of file - 9053 bytes

2 more replies
Relevance 119.77%

Hi all. My problem started shortly after i downloaded some new nvidia game card drivers. after being istalled it asked to have pc rebooted. once i reboot at the screen right before administrator log in, the screen just stayed black and did nothing else. i ran the pc in safe mode to get rid off watever the pc caught with Mc Cafee and comcast spyware removal which did not hlep at all. i tried other things like checking memory for error and other things but nothing fixed the black screen problem at that point i was about to just reprogram the whole pc but of course i could not find and still cant find any of my pc disks. the only thing that worked temporarily was the system restore which only worked from the F8 boot. i set it for a day back it recovered everything everything worked fine til the next day after i start the pc and everything was loaded a message poped for permision "block or unblock" a program with a program name i did knew which was EA for some games i play. as soon as i did that my pc got messed up again, it boots fine i can go on the enternet but can not run any programs at all. i get this mesage evertime i try to."An unidentified program wants access to your computer" msdig.exe unidentified publisher Cacel or Allow which i press cacel everytime worried that it might just make my pc even worst. i also noticed that the name of the unidentified publisher changes everyime i boot the pc. even when i try to start my enternet explorer it asks for a... Read more

Answer:Cant run any program"unidentified program wants acess to ur computer"pops everytime

Hi, Welcome to TSG!!

If you still need help please post a HJT log.
Click here to download HJTInstall.exe

Save HJTInstall.exe to your desktop.
Doubleclick on the HJTInstall.exe icon on your desktop.
By default it will install to C:\Program Files\Trend Micro\HijackThis .
Click on Install.
It will create a HijackThis icon on the desktop.
Once installed, it will launch Hijackthis.
Click on the Do a system scan and save a logfile button. It will scan and the log should open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijackthis fix anything yet. Most of what it finds will be harmless or even required.

Also note that I have deleted your second post, let's keep the language clean, ok?
 

1 more replies
Relevance 101.27%

I need help with a long standing problem every time I open a programme or a web page or just anything the help and support page related to that program me or page pops up ..I even formated my machine and re installed the os but the problem still persists tried almost everythin I knew even disables the help and support option but it didn't go please help if u can

Answer:help and support pops up everytime i open a program

Hmmm, this is strange. What you are saying is that immediately after you re-installed Windows 7 you are still getting this issue? What are you using to install Windows 7? OEM recovery disk?

9 more replies
Relevance 84.87%

.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 6.0.2900.5512 BrowserJavaVersion: 10.4.1
Run by Artur Ferreira at 19:59:57 on 2012-05-26
Microsoft Windows XP Professional 5.1.2600.3.1252.351.2070.18.1023.311 [GMT 1:00]
.
AV: AntiVir Desktop *Enabled/Outdated* {AD166499-45F9-482A-A743-FDD3350758C7}
.
============== Running Processes ===============
.
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\spoolsv.exe
C:\Programas\Avira\AntiVir Desktop\sched.exe
svchost.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Programas\Avira\AntiVir Desktop\avgnt.exe
C:\WINDOWS\system32\RunDll32.exe
C:\Programas\ATI Technologies\ATI.ACE\Core-Static\MOM.exe
C:\Programas\Ficheiros comuns\Java\Java Update\jusched.exe
C:\Programas\DivX\DivX Update\DivXUpdate.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Programas\Avira\AntiVir Desktop\avguard.exe
C:\Programas\Application Updater\ApplicationUpdater.exe
C:\WINDOWS\system32\svchost.exe -k hpdevmgmt
C:\Programas\Avira\AntiVir Desktop\avshadow.exe
C:\Programas\ATI Technologies\ATI.ACE\Core-Static\ccc.exe
C:\Programas\Oracle\JavaFX 2.1 Runtime\bin\jqs.exe
C:\Programas\Malwarebytes' Anti-Malware\mbamservice.exe
C:\WINDOWS\System32\svchost.exe -k HPZ12
C:\WINDOWS\System32\svchost.exe -k HPZ12
C:\WINDOWS\system32\PnkBstrA.exe
C:\WINDOWS... Read more

Answer:Everytime i open a program (program name).exe bad image appears

this was solved by:
When i opened a program (program name.exe) appears
but inside the warning the following directory was written
C:\progra~1\imesha~1\mediaBar\datamngr\iebho.dll
destroyed the files on mediabar and it works.

2 more replies
Relevance 84.05%

hello all,

i keep getting the msg "an unidentified program wants to access your computer" from windows access control when i cancel it another one comes stright up but with a differant setup number "setup244948654" and so on does anyone know how to get rid of this ?

Answer:an unidentified program wants to access my computer

Hi welcome to the forum.
The following link should help explain some of the things to you:-
User Account Control Step-by-Step Guide
Hope this helps.

4 more replies
Relevance 82%

Each time I try to open something new my computer acts like it's the most taxing thing it's ever seen. It took about a minute an a half to open this browser, same thing happens when I open anything, basically. Once I get programs open they run alright, maybe a little slow here and there, but every program doesn't want to open in a reasonable amount of time. It jut kinda acts like nothing happened for a long time then will finally open it.
 
I've run a few free malware/spyware(ioBit, Adaware) scans and they all say my computer is running fine. Sometimes it seems to help if I move the mouse or click around, kinda like the computer "forgets" that it's trying to open something until I prod it, and sometimes it seems as though it suspends everything I'm doing for a while, until it tries really hard to catch up and does everything at once.
 
Can anyone help or give me advice? Also what information do I need to know/where do can I find that info on my computer so I don't have to waste everyone's time asking where to find the info, haha.
 
Also if you happen to know anything about making League of Legends perform better, I'd love to hear any performance tips, but also something similar will end up happening here and there on LoL. I'll be mid game and it'll be running fine, then it'll temporarily freeze of drop to around 4fps, until everything happens really quickly to catch up. It seems to be completely random, there can be a lot of things going on on the screen, or al... Read more

Answer:Everytime I open a new program computer is extremely slow about it

Oh and it doesn't seem to matter if it's opening the program brand new, or if it's in the bottom right hand box with the already running programs, just trying to maximize the window gives it problems.

7 more replies
Relevance 82%

hello guyz i'm just new at asking help from you but i just want to ask that why my computer hangs when i execute specific programs like:

1.Limewire
2.an Nintendo Ds emu
3.window security alert
4.picture manager

these are some 4 exe programs that hangs when i click on them.. i'll report my log after this...

here's my log:

Deckard's System Scanner v20071014.68
Run by user on 2008-03-21 12:28:49
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 5 Restore Point(s) --
48: 2008-03-21 04:28:54 UTC - RP101 - Deckard's System Scanner Restore Point
47: 2008-03-21 01:48:23 UTC - RP100 - Made by Registry Mechanic O
46: 2008-03-20 07:18:13 UTC - RP99 - Removed PIF DESIGNER
45: 2008-03-20 00:52:11 UTC - RP98 - Removed Microsoft .NET Framework 2.0 Service Pack 1
44: 2008-03-19 11:37:42 UTC - RP97 - System Checkpoint


-- First Restore Point --
1: 2008-01-14 19:20:57 UTC - RP54 - Installed Windows Installer KB893803v2.


Backed up registry hives.
Performed disk cleanup.



-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-03-21 12:32:10
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Int... Read more

Answer:Computer Hangs everytime i chose a specific program

Hi sapphirejp,

Sorry for the delay in looking into your log, as we are extremely busy in this section of the forums. If you still require assistance and are not seeking help elsewhere, then please carry out my instructions.

Please subscribe to this thread so that you are notified when you receive a reply. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Add Subscription.

--------------------------------------------------------------

Download SDFix and save it to your Desktop.

Double click SDFix.exe and it will extract the files to C:\SDFix

DO NOT run SDFix yet. We will shortly

--------------------------------------------------------------

Enter Safe Mode
Restart your computer
After hearing your computer beep once during startup, but before the Windows icon appears, press F8
Instead of Windows loading as normal, a menu should appear
Use the up arrow key to highlight Safe Mode and press Enter.
Login with your usual account
Once you have logged in, a warning message will appear regarding starting windows in Safe mode, click OK and windows will load your desktop environment

Note: Some systems, this may be the F5 key, so try that if F8 doesn't work.

--------------------------------------------------------------

Run SDFix
Open the extracted SDFix folder and double click RunThis.cmd to start the script.
Type Y to begin the cleanup process.
It will remove an... Read more

1 more replies
Relevance 81.18%

Hello,
I believe ever since I reinstalled this comcast internet thing on my computer (btw Comcast is my isp), I have had problems with this Windows Installer 1.2 box poppin up everytime I open up Windows Explorer to access my files and when I open up a Windows program like Word or Ms Publisher (my fave). How can I get this to stop? Make it worse, the guy who gave me this computer forgot to give me the backup winxp pro cd and I no longer deal with him anymore. I hate to have to purchase one. Also, I have searched everywhere for answers on how to do this and nothing is useful. I am hoping I can find final, useful answer here. Please help asap! Thanks.

Answer:Help! I have a 1706 error everytime I open a program on my winxp pro computer!

Check this same thread on Error 1706: http://www.techsupportforum.com/f57/...-a-222229.html

Looks like it's MS Office that's failing..

1 more replies
Relevance 74.62%

I want to block a program acess to the internet.
But I want to do it only by FIREWALL of XP , without the need to install a new firewall.
How I can do it?
I do not know the port which this program access the internet.
 

Answer:blocking program to acess the interent

6 more replies
Relevance 74.62%

My computer says that the program frostwire was downloaded via My Documents, but I cannot use the program

Answer:Frostwire downloads but cannot acess program

what errors are you getting? Also, where are you downloading it from?Some HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 74.62%

Does anybody know of a program to block certain website's that I specify?Preferably a free one.

Or is there a way to do it in windows.
 

Answer:Program to block acess to certain website's

Edit your hosts file.
 

7 more replies
Relevance 74.62%

Heres a n00b question for ya:
Where can I switch the default aplications in ubuntu? I got the xine movie player installed and I want to be able to use that instead of totem, but I can't figure out how I can set xine to be the default player when I open movie files off the net like .wmv files and such. Also does anyone know of any cool sites out there that would be helpful in making the transition from win xp to ubuntu? Preferably something dumbed down that a n00b is able to understand.


Thx for the help,

Grimmer
 

Answer:Ubuntu and program acess defaults

Grimmer, have you read the official Ubuntu Wiki articles on www.ubuntu.com?

Post again if you cannot find the specifics on how to set your preferences.
 

4 more replies
Relevance 73.8%

I have only recently had this problem and can not find a solution. Windows Installer pops up everytime I select My Computer or My Documents it is very very annoying. Any help would be great.

The process the installer is linked too is explorer.exe
 

Answer:Windows Installer pops up everytime I select My Computer or My Documents

16 more replies
Relevance 73.8%

Why is it that any program that touches the drive becomes intensly laggy when heavy drive acess happens? I mean, is it really that much of a stretch on the CPU to copy and *nix iso from drive to drive? Is it a hardware setup problem?

Same sort of thing happens when I use a USB key, so I don't think so. Any ideas?
 

Answer:Drive acess nukes program speed.

Should not happen in either xp or *nix.

Wait a min. Is it hard disk access? If so, then you google for how to speed up the hard disk in *nix. The default is usually the slowest.
 

2 more replies
Relevance 72.98%

I just recently bought a second hand t42 2378 from my dads work and Windows XP was reinstalled along with Office 2003. However, the wireless drivers have not been installed and ive been downloading the driver programs from the lenovo website (from the home comp) and trying to install them, but it still says that the 'driver is not installed' and is driving me up the wall. Any help would be greatly appreciated.

Answer:T42 does not have working wireless/network drivers or the "acess ibm" help program

Welcome to the forum! Could you please post the full 7-character model number of your T42 (2378-???) so we could direct you to the correct drivers?

8 more replies
Relevance 72.98%

I am trying to copy a new version of an .exe file from a CD to a subfolder on top of the old version of the file in c:\program files.

Every time I do so I get an "error:access denied" message.

I have taken ownership of all files and folders concerned.

I can copy the new file to any other location. I can delete the old file but still, if I try to copy the new file I get the same message
 

Answer:Error Acess Denied copying to c:\program files

7 more replies
Relevance 72.98%
Answer:Trying to extract rar into program files in a folder, acess denied.

does it ask for a password??

3 more replies
Relevance 72.57%

I was looking at my control panel-Add/Remove list and I have a program called Xed that's it just Xed It uses 625 MB so It's kind of sizable.  I was wondering if anybody else has this thing?  If so what is it?  What does it do? and most important.  Can i delete it?  I'm partial to having programs that I installed and understand their purpose for being on my computer.  Any help would be greatly appreciated. 

Answer:Unidentified program

Might be Xed mp3 converter... Can you locate it on the Program Files first? Look for the XED folder.

7 more replies
Relevance 72.57%

To Change Your Search Provider

Anyone familiar with this notification ? (Win 8.1/IE11)
I ran AdW Cleaner which recommended to uninstall the StumbleUpon/Favorites Folder, which I did.

Immediately after, I searched for an item and my search provider had been changed to Bing from Google. I changed it back and moments later I got the above notification but Google had not been changed.

After "Googling" the issue, others experienced the same after downloading freeware (which AdW is). But I downloaded AdW from the official site and have not had this problem in the past. Also, during download there was no option to accept or decline a search provider change.

My concern is that initially, before the warning, my search provider was changed from Google to Bing without authorization. I only received the warning after the fact.

Thoughts ?

Answer:An Unidentified Program Wants

I would run another adware program as well to get a second opinion.

3 more replies
Relevance 72.57%

My computer is saying I have an unidentified program running the background, or it also says abnormal program, here is my hijack this log.(Moderator edit: log post moved to HJT log Forum for team analysis and member assistance. jgweed)Logfile of HijackThis v1.99.1Scan saved at 8:35:41 PM, on 8/17/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\Program Files\Common Files\Symantec Shared\SNDSrvc.exeC:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exeC:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exeC:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exeC:\Program Files\Norton AntiVirus\navapsvc.exeC:\Program Files\Norton AntiVirus\IWP\NPFMntor.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDO... Read more

Answer:Unidentified Program

Hi and welcome to Bleeping Computer! My name is Sam and I will be helping you. Please download Ewido Anti-spyware and save that file to your desktop.This is a 30 day trial of the programOnce you have downloaded ewido anti-spyware, locate the icon on the desktop and double-click it to launch the set up program.Once the setup is complete you will need run ewido and update the definition files.On the main screen select the icon "Update" then select the "Update now" link.Next select the "Start Update" button, the update will start and a progress bar will show the updates being installed.Once the update has completed select the "Scanner" icon at the top of the screen, then select the "Settings" tab.Once in the Settings screen click on "Recommended actions" and then select "Quarantine".Under "Reports"Select "Automatically generate report after every scan"Un-Select "Only if threats were found"Close Ewido anti-spyware. Do not run a scan just yet. We will shortly.Reboot your computer into SafeMode. You can do this by restarting your computer and continually tapping the F8 key until a menu appears. Use your up arrow key to highlight SafeMode then hit enter.

Clean out your Temporary Internet filesClose Internet Explorer and close any instances of Windows Explorer.Click Start -> Control Panel and then double-click Internet Options.On the General tab, click Delete Files under Tem... Read more

2 more replies
Relevance 72.57%

My McAfee fire wall tels me that a program called Media Gateway wants access to the internet. I do not recognise this program and it resides in my "program files" folder as Media Gateway as a single file called MediaGateway.exe. can anyone tell me what it is?

Answer:Unidentified Program?

click here

9 more replies
Relevance 72.57%

Every afternoon at 3 pm a program appears to start up scanning my computer. I have Macaffee but it is not that. On checking Activity monitor nothing shows up but I can hear this scan churning away and everything then slows up and I have problems doing anything during this time. It last for about an hour.
Ops is windows XP

Answer:Unidentified program

See what settings you have for automatic scans on McAfee and any other anti-malware software installed.

4 more replies
Relevance 71.75%

can anyone tell me what a motive chorus daemon progrom is? my fire wall blocks it and ask's me if i would like to give it access.

Answer:an unidentified program is it good or bad

Which ISP?

6 more replies
Relevance 71.75%

I dont know what is this, is it a virus or a program of mine or whatever. I found this program running along with my startup. Does any one had seen in ur PC this kind before, then what could it be?

 

Answer:Unidentified Program at StartUp ?

purshupro said:


I dont know what is this, is it a virus or a program of mine or whatever. I found this program running along with my startup. Does any one had seen in ur PC this kind before, then what could it be?
View attachment 17734
Click to expand...

Never seen it on my system,but you could open the file location and do a VT check.
 

18 more replies
Relevance 71.75%

This unidentified program shows up in my task scheduler. Is this part of an update or is it some kind of invasive allowance when I conduct a specific operation? :-

(C904C594-F406-48C8-A3F2-FE3132F51714)

Hoping someone knows and that it's an OK instructive program.

Answer:[SOLVED] Unidentified program

You could check recent Windows updates to see if it matches anything.

12 more replies
Relevance 71.75%

I ran msconfig trying to clean up some programs that start when I boot and I noticed this program "Project1" by "HH." I have no idea what this is, is it dangerous and does it need to be removed? Any help is appreciated

Edit: Windows 7 if that helps
 

Answer:Help removing unidentified program

This is a Remote Administration Tool that is used by hackers to control the victim's machine remotely. The possibilities of such programs depend on the needs of the attacker. The attacker infects the PC via the e-mail or File and Print Sharing. A "server" allows him to connect via a "client" on his own machine. The functions of a RAT may vary, depending on the needs of the hacker. Some RATs can't really harm your PC and the only purpose they were made for is hooliganism. But some versions can steal vital information, delete files and even crash your system. This RAT changes port, on which NetBus runs. The author is a hacker called Cybernetic cowb0y. He wrote this pest in December 2002.
 

12 more replies
Relevance 71.75%

Well this window keeps popping up saying to allow this program to acces my computer well i click cancle so it pops up again and again to where the point where my computer freezes.
So i ran a QUICK sweep on safe mode (the window doesent pop up on safe mode) and it dident find any viruses just cookies, so etheir im thinking up backing up when i downloaded the program and this started happening or the antivirus is not finding anything on safe mode.
So please any help!

Answer:Window pops out saying to allow this program...

Run this

Malwarebytes.org


And Microsoft Security Essentials, to be sure that you are clean.

2 more replies
Relevance 71.75%

For a while now, i've had this annoying problem involving a program that pops up randomly from time to time and disrupts what I'm currently busy with. It pops up and disappears before I can figure out what it is. Is there anyway I can find this program and possibly stop it from doing that? Any ideas?

Answer:A program that pops up randomly

I'd suggest first to rule out the possibility that it could be something malware-related, by following the 5 Step Process.

13 more replies
Relevance 71.34%

Hey guys, I'm new over here and I've experienced quite a number of BSODs since i got this computer but I've never really got help and just used google and updated drivers etc.

Anyway, I've been using Vuze for the past few weeks and it's running fine and stuff but recently every time i run the program i get the PFN_LIST_CORRUPT BSOD without fail. I had the USB something error but i fixed it by updating my BIOS.

Any help would be useful because i tried reading on how to analyze the dumps but to no avail .

Thanks a lot in advance

P.s. I have Norton 360 installed even though the report says that i don't have any anti-virus..

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7 Home Premium
- an OEM or full retail version? Full Retail

- What is the age of system (hardware)? Around 2 Years?
- What is the age of OS installation (have you re-installed the OS?)
Less than a year since it's a new hard disk

Answer:BSOD : Everytime i try to run this program

Your Razer Diamondback driver is the cause, please update it
Razer Support

An old 2004 driver should be updated, it belongs to a software from http://www.brother-usa.com/downloads/

Code:
BrPar64a.sys fffff880`04872000 fffff880`0487c000 0x0000a000 0x40e17e92 29/06/2004 18:37:06
If the above does not fix the isssue:

Use the Norton Removal Tool and remove your Norton product. Then reinstall the latest version

Code:
SYMEFA64.SYS+ce000 fffff880`012da000 fffff880`013be000 0x000e4000 0x4d7d899a 14/03/2011 07:20:58


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck CD, {fffff980717d7000, 0, fffff80002eca77a, 0}

Unable to load image \SystemRoot\system32\drivers\copperhd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for copperhd.sys
*** ERROR: Module load completed but symbols could not be loaded for copperhd.sys

Could not read faulting driver name
Probably caused by : copperhd.sys ( copperhd+16c9 )

PAGE_FAULT_BEYOND_END_OF_ALLOCATION (cd)
N bytes of memory was allocated and more than N bytes are bei... Read more

2 more replies
Relevance 71.34%

why everytime i open any program in my cpu hard drive always display

Answer:why everytime i open any program in my cpu ha

Please complete the statement then ask the question and include other information about your system and the problem (include this all within the text of the post please).edit: Also do not use CPU interchangably with computer or computer case, the CPU is one component within your computer's case. CPU stands for Central Processing Unit which the computer manufacturer purchased from Intel or AMD as the main force behind your system.You have to be a little bit crazy to keep you from going insane.

2 more replies
Relevance 70.93%

System WINXPSP2, IE7 - HP compaq laptop

A thing of concern to me is that periodically something is appearing on the taskbar. A gray tab button pops up on the taskbar, just for a couple of seconds. It doesn't have a name on it as a regular program would have - just an icon. The icon is the white box with the blue band across the top, indicative of an .exe or .bat file. This appears only for a couple of seconds and then goes.

I've seen it appear when the computer starts up, but it doesn't come on every time. At other times it appears on the taskbar whether there are other programs running in the foreground or whether just the desktop is on and only other background processes running.

I have previously sent a hijack this file for scrutiny and it was reported clean. However Hijack this only shows programs/processes running at the time. A suggestion was made elsewhere that I run Task Manager and when the batch/exe file runs to watch for it to appear in Task manager under processes, but it only appears for a couple of seconds and goes before I have a chance to see it there.

I have updated antivirus, Spybot and Adaware and have run them over the computer with no report. I rang the AV company and asked for further confirmation for viral presence and from what I told them (all programs in start up file were genuine), they considered there was no problem.

I realise that some background tasks run from time to time, however this has only been happening for the last co... Read more

Answer:Unidentified exe/bat program runnign on taskbar

You can try this:

Download "Autoruns" (freeware) here:

http://www.microsoft.com/technet/sysinternals/Utilities/AutoRuns.mspx

It will show you everything that is loaded at boot. You may be surprised to see how many items are loaded. Maybe something will show up in Autoruns that may not look quite right.

You say the gray tab sometimes shows up on boot, try the trial version of "Bootlog XP".

Download here: http://www.greatis.com/utilities/bootlogxp/

Maybe you'll get lucky and it will appear during one of the runnings of Bootlog XP.
 

2 more replies
Relevance 70.93%

How can I identify which program keeps trying to connect to the internet when I am offline and then how can I prevent it from doing this. This is a constant problem whenever I am offline. Many thanks to anyone who can help me. I am using vista ultimate
 

Answer:unidentified program trying to connect to the internet

8 more replies
Relevance 70.93%

A program called {DF4DDDE1-F540=11D2-9540-0040052FC4F9} runs every time I start up my Win XP Home PC. It does not appear to be malign and ending it simply removes for the current session but it restarts on booting up.Can anyone help tell me what this is, good or bad. Googling it has not helped me answer this.

Answer:Unidentified Program running at start up

If you do a Google search you will find loads about this. I've had a quick look but it doesn't appear to have been identified.

3 more replies
Relevance 70.93%

I have a program(?) or something that is running on Autoplay.It has no name and there is no means of identifying it?.It just starts up and appears like it is searching? for something(a torch swinging backwards and fowards)I try deleting it but it comes up again after a very short time.How can I find out what this is and how can I delete it?

Answer:An unidentified program running on Autoplay

Run > msconfig . This will give you a list of your Startup items. If there is one that has no description I would start by unticking it and rebooting.

4 more replies
Relevance 70.93%

I am using Windows XP and this scenerio just started happening. Using Outlook, I get the attached error message when trying to read or send mail. When using PageMaker, I get the same message when trying to export a PDF. I suspected a virus, but everything comes up clean. Ram & memory issues are OK. Seems there is no apparent reason nor any specific chain of events that make this occur. I am new to XP and have been running this os for about 6 months. This is the first I've had anything unusual happen.

Please advise.

Webmac
 

More replies
Relevance 70.93%

Well, I had 2 3rd gen x1 carbon in 3 month. the first one was totally defected, so I got the replacement. but first one and secone one has same problem that programs in background or minimized randomly pop up. second one does it less frequently, but still interferes my typing sometimes. is there any solution for this problem?

Answer:random background program pops up

I have noticed same on my 3rd gen as well when i do stuff the program "MalwareBytes" poped up on me every 5 mins or less i minimized it then shortly after it poped up again and it keep going on but after closing it a few times it has begun to stop poping up like it did so lately it's been staying minimized all time and doesent popup anymore.

1 more replies
Relevance 70.52%

Everytime I open up a program, this message keeps popping up "the applicatiion has failed to start because msymaibus.dll was not found. I also get other dll's that pop up. They also pop up when I try to close something. How do I get rid of this nightmare? Please help!!!!!!

Answer:Everytime I try to open a program, this keeps popping up

Being helped here:

http://forums.majorgeeks.com/showthread.php?p=1290587


From our pre-posting sticky, at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.


http://www.techsupportforum.com/f50/...lp-305963.html

which you did not read or provide logs from:


Quote:




NOTE: We are aware that users sometimes seek help from several Forums at the same time. Unfortunately, this can cause confusion and actually wastes time and resources - yours, ours and other Volunteers across the community. If you have already posted at another Forum, please advise us, or them, and choose just one.




Since you're already receiving help elsewhere, this topic is closed.

1 more replies
Relevance 70.52%

OK, so my computer will boot up and sit at the desktop all day if I don't do anything...even opens an image file I have on the desktop but that's about it. If I try to start any program (attempted to run norton/adaware/spybot/spysweeper and system restore or use internet) the computer just reboots without any error mesage or warning. Not sure what to do here, any ideas of what I can access to try to recover the PC? I have ZoneAlarm, Norton, Spysweeper, AdAware, Spysweeper, and Spybot Search and Destroy and check my PC often so a virus seems unlikely but you never know I guess. I was playing an online game (World of Warcraft) when the first reboot occured and can't do anything since. Any ideas? Thanks in advance!

Im running Windows XP Home SP1
 

Answer:PC reboots everytime I try to open a program

10 more replies
Relevance 70.52%

Im not computer savvy. Everytime I try to open a program a screen pops up and says what program u want to use to open this file. Then it shows the file with .exe added on end. it recommends use interent explorer and when you follow their prompts it just recycles the questions and nothing happens. Cant open many files now or start programs. Must be some type of virus or something affecting the registry. How can i remove it?

Answer:everytime i try to open program .exe appears

pjb,Welcome to the forum!If you cannot download the following file, the malware may be blocking the attempt. You need to download to a clean computer and then transfer to the infected one using a USB flash drive, or external media (an external drive or a CD).Please download exeHelper from one of these two places:http://www.raktor.net/exeHelper/exe...http://www.raktor.net/exeHelper/exe...Note: The malware on your computer does not allow you to launch executables (a file ending with .exe), so we must fix that first. This program has a .com or .scr file extensin, so it should bypass the malware hold.Save it to your USB Flash drive (or removable media), and then go to the infected computer, and place the file on the Desktop. XP users, double-click the file to run it.Vista or Windows 7 users, right click the downloaded file and select ?Run as Administrator"A black window should pop upPress any key to close, once the fix is completed.>>Please post the contents of the exehelperlog.txt in your reply.<<[It is created in the directory where you ran exeHelper, and should also open at the end of the scan.]Next, download RogueKillerhttp://tigzy.geekstogo.com/Tools/Ro...Save it to your Desktop.Now, close all open programs.XP users, double-click the file to run it.For Vista/Windows 7, right click the file and select: Run as AdministratorWhen prompted, type 1 and hit Enter.An RKreport.txt should appear on your Desktop.Note: If the program is blocked, do not hesitate to try several t... Read more

2 more replies
Relevance 70.52%

EDIT: After I posted this thread Mozilla Firefox instantly closed down so I'm now using my brother's computer.

The main problem is I can't run a spyware scanner. I open up spybot and it closes automatically when I try to scan. Then I tried adaware and before it finished loading it closed for some reason. Then I thought about trying an internet based one so I went for the trend micro one and as soon as I clicked the link to it my internet closed.

Anyways, here's my log:

Logfile of HijackThis v1.99.1
Scan saved at 1:11:13 PM, on 12/3/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\AntiVir PersonalEdition Classic\sched.exe
C:\Program Files\AntiVir PersonalEdition Classic\avguard.exe
C:\WINDOWS\System32\DRIVERS\CDANTSRV.EXE
C:\WINDOWS\System32\cisvc.exe
C:\WINDOWS\system32\RioMSC.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\hkcmd.exe
C:\Program Files\AntiVir PersonalEdition Classic\avgnt.exe
C:\WINDOWS\System32\NILaunch.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Paul\DAO\svchost.exe
C:\Program Files\Logitech\Desktop Messenger\... Read more

Answer:Help! Everytime I run a spyware program it closes!

Can anybody help?

19 more replies
Relevance 70.11%

A program has started running on my computer that shows up whenever I go to any website. At the task-bar area of my laptop, there is a bar that starts with a white circle with a blue S in the middle. It has to do with monitoring scripts on the site. In the right corner of this task-bar is a button labeled OPTIONS. When I click on it, a long menu comes up asking me to choose how or if I want to run scripts on this site, eg. temporarily allow, not allow, globally allow (dangerous), revoke temporary permissions, allow, etc. I have never had this before, until yesterday when I had to do a windows system repair (using windows built-in repair when there's a problem). It seems to be something that is trying to protect me, but why now? I have had this laptop for several years and it is just now appearing. If I don't make the proper selections for the website, some things don't show up...just leave blank spaces on the website. I don't want this running, but how do I stop it when I can't find out what it is. Nothing new shows under programs, so it must be something in windows that's always been there but never activated. I need help identifying it and stopping it.

Answer:Unidentified program running on my laptop is very annoying

Welcome to the Seven Forums

Are you using FireFox? What you have described sounds like a extension called NoScript, it can be disabled or removed by going to Tools> Add-ons and then located it and disable or remove it and then restart Firefox

Jerry

1 more replies
Relevance 70.11%

Good morning, On the very infrequent occasion when MBAM Pro happens to display an OUTGOING block message, I will try and ascertain which program on my computer is making the call using the TcpView program. Unfortunately, it seems I can never get TcpView going fast enough to catch the program responsible. (Being I use an XP Pro machine, the block message only displays the IP address).Question: Is there some other method I can use to see which application on my machine is making these infrequent outgoing calls? (HpHosts shows the IP address to be malicious and located in Germany).Thanks for any info.

Answer:MBAM outgoing block; Any program besides TcpView to find originating program on computer?

Yes, use procmon. Start procmon before you get the warning, and filter on "Operation is TCP Connect".

7 more replies
Relevance 70.11%

Hey everyone, i have a trouble, my laptop yesterday shows a blue screen "STOP: c0000135 The program can`t start because %hs is missing from your computer. Try reinstalling th program to fix this problem."
Please I need your help.

*I can't start in safe mode
*I can't repair since DVD Windows 7
*I can't Restore System

I installed in a USB flash driver FARBAR recovery scan tool in the command propt

It was the log:

Scan result of Farbar Recovery Scan Tool (FRST) (x86) Version: 21-01-2013 02
Ran by SYSTEM at 24-01-2013 11:13:13
Running from F:\
Service Pack 1 (X86) OS Language: Spanish Modern Sort
Attention: Could not load system hive.
Attention: System hive is missing.

==================== Registry (Whitelisted) ===================

Attention: Software hive is missing.

ATTENTION: Unable to load Software hive.
==================== Services (Whitelisted) ===================
==================== Drivers (Whitelisted) ====================
==================== NetSvcs (Whitelisted) ===================
==================== One Month Created Files and Folders ========
==================== One Month Modified Files and Folders ========
==================== Known DLLs (Whitelisted) =================
==================== Bamital & volsnap Check =================

C:\Windows\explorer.exe IS MISSING <==== ATTENTION!.
C:\Windows\System32\winlogon.exe IS MISSING <==== ATTENTION!.
C:\Windows\S... Read more

Answer:STOP: c0000135 The program can`t start because %hs is missing from your computer. Try reinstalling th program to fix this problem

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/482878 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

2 more replies
Relevance 70.11%

Two problems.

1.) When I start my computer these days, a window pops up titled C:\Program Files\NVIDIA.
It contains a file folder icon and an Nvidia file.

2.) In my control panels, I also have Nvidia Nview Desktop Manager, but when I click on it I receive an error loading message, and 'the specified module could not be found'.

I was looking at the Nvidia Control panel a couple of months ago, trying to figure out this and that, and I ran 'Tune System' and some other options. (By the way, there was a big improvement in the games I play.) I must have accidentally done something else to create the pop up window, and error messages, but I don't know what.

Does anyone have any suggestions?

(I did do a search on this topic, but while I saw other Nvidia problems I didn't see anything about these problems.)

Thank you.

Vera Lenora
Scottville, MI
 

Answer:C:\Program Files\NVIDIA -- window pops up

Try uninstalling your NVIDIA software and reinstalling it.
 

2 more replies
Relevance 70.11%

Setup wizard of a program called total video converter pops up at every start up. I've uninstalled this program completely long time ago (4 months) but i believe something is wrong in the registry. Even if I install it as advised and reboot, I will get a setup wizard on the next startup to install it again. Please help! thank you

Answer:A program setup wizard pops up at startup

tourist_94, SWAG, a couple of 'maybes', take a look at your startup menu and be sure it isn't in there (sorta doubt it, but...). A popup is most likely a worm/trojan nasty. There're several free scanners around that can handle one, but be aware that a virus and a worm/trojan aren't the same and not all AVs can clean one. Be sure to run a worm/trojan specific cleaner.HTHEd in Texas

4 more replies
Relevance 70.11%

What can i do? i have Windows vista, and it happened just after i went for an anti spyware scan from virgin media
 

Answer:when double clicking a program, it pops up with open with

6 more replies
Relevance 70.11%

Whenever I logon to (XPhome, 2003 Server) the Program files folder automatically pops up. The event takes place on three of my PCs, but only on my personal user-ids and not on the others.

I've tried the following:

- disabling "Restore previous folder windows at logon"
- Verified that its not related to the StartUp folder.

Any other sugestions?

Thanks
 

Answer:(XP) Upon Logon the Program Files folder always pops up.

Maybe this can help:

http://support.microsoft.com/kb/170086/
 

1 more replies
Relevance 70.11%

i don't know a ton about computers so i'm kinda bamboozled here. i did the first five steps that were posted...so from there i'm not quite sure what to do.
the issue is that this winfixer program pops up frequently. it's obviously slowing my computer down a whole lot. i tried to do my macafee virus scan, it doesn't pick it up at all.

the help is much appreciated.



Mod's Message

Please post the required logs as instructed in Step #5

Thanks for your cooperation.

More replies
Relevance 70.11%

Whenever I exit any program window, or even a simple file folder, a blank Internet Explorer brower pops up somewhere on the screen.

I have beencleaning this system off using Spybot, CCleaner and Adaware, however this issue still exists.

Any suggestions?

Answer:IE browser pops up when closing any folder or program

Hi Chris

This has to be malware related. Follow the HJT link in my sig and go through the whole 5 steps process. Post your final log in the HijackThis section where security techs will review it. It can take some time before you get an answer from them as that section is overcrowded, just be patient. Once they'll start reviewing your log you'll have quick feedback.

You can also check this thread :
http://www.techsupportforum.com/secu...val-guide.html

1 more replies
Relevance 70.11%

There used to be one of these in the days of W98 or maybe W95. It was called TrayList or DeskList or something like that. I'm sure one of you uh, ahem, more senior gentlemen, will remember it.

It had a small unobtrusive icon that sat, if I recall correctly, in the systray, the notification area.

When clicked, up popped an alphabetized text list of all the app shortcuts you'd previously added to it. If you had heaps of 'em , there'd be several columns of the things.

Your list might read, say, 'Acronis, Beyond Compare, CamTech.....SevenForums, Word,etc etc. To open a program, you single-clicked a name.

For me, there's never been a quicker, easier way to start apps and software than a quick scan of an alphabetic list to find your target. Sure, clicking a shortcut's icon is pretty quick, and you can do this fast with the handful you're most familiar with. But for the others you use less frequently, it's sometimes a challenge to recall which icon is which.

Anyway, the developer lost interest in his little program and it never worked properly past W98. Or was that XP?...

So, my question is: Does anyone know of something like this? Shucks, it's times like this I wish I knew more about programming. I can't believe this little piece of software could be that hard to write. For someone with a full deck of cards, that is :-)

Answer:Anyone seen a tray app that pops up a list of program shortcuts?

Something like this?

Create Customizable System Tray Shortcuts For Any Windows App With Tray Tools

4 more replies
Relevance 70.11%

Whenever I insert an audio CD into my drive, I get a window which pops up asking "What do you want Windows to do?".

The options I have are to either Rip, Copy or Play the CD using a variety of programs that are automatically added to the list.

I want to add EAC (Exact Audio Copy) to that list, but I don't know how.

Any suggestions?

Answer:How Do You Add A Program To The Window That Pops Up When You Insert An Audio CD?

Hello Son of Spam,

This can be configured in the File Types section.
To open up this you :
- open a Windows Explorer
- Go Tools > Folder Options
- on the file types tab you select the extension (NONE) Audio CD, click Advanced and there you go to add Programs on to the list.

Same goes for a lot of other content.

Greetz
Stumpy

1 more replies
Relevance 70.11%

There used to be one of these in the days of W98 or maybe W95. It was called TrayList or DeskList or something like that. I'm sure one of you uh, ahem, more senior gentlemen, will remember it.

It had a small unobtrusive icon that sat, if I recall correctly, in the systray, the notification area.

When clicked, up popped an alphabetized text list of all the app shortcuts you'd previously added to it. If you had heaps of 'em , there'd be several columns of the things.

Your list might read, say, 'Acronis, Beyond Compare, CamTech.....SevenForums, Word,etc etc. To open a program, you single-clicked a name.

For me, there's never been a quicker, easier way to start apps and software than a quick scan of an alphabetic list to find your target. Sure, clicking a shortcut's icon is pretty quick, and you can do this fast with the handful you're most familiar with. But for the others you use less frequently, it's sometimes a challenge to recall which icon is which.

Anyway, the developer lost interest in his little program and it never worked properly past W98. Or was that XP?...

So, my question is: Does anyone know of something like this? Shucks, it's times like this I wish I knew more about programming. I can't believe this little piece of software could be that hard to write. For someone with a full deck of cards, that is :-)

Answer:Anyone seen a tray app that pops up a list of program shortcuts?

Something like this?

Create Customizable System Tray Shortcuts For Any Windows App With Tray Tools

2 more replies
Relevance 69.7%

Everytime I open a program I get a bad image message such as :

Dll c:/windows/system32/spinella is not a valid windows image. Please check this against your installation diskette.

Please tell me what I can do to stop this problem. Its been going on for about 3 weeks now no matter how much times I scan my computer.
 

More replies
Relevance 69.7%

C:\ProgamData\Quoteex\Geodex.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support" Error status 0xc00012F.Whatever I do, this opens all the time, now I know i got viruses, malwarebytes and avast cant detect alot of them, some of them say ''access denied'' Really need help here!

Answer:Bad image error everytime I open a program

"I know i got viruses, malwarebytes and avast cant detect alot of them"Copy & Paste the contents of the logs in your reply please.

25 more replies
Relevance 69.7%

hi,

after i installed sp2 i try to start a program and the windows installer for
that program would run and i would have to cancel the installer before the program would start.

for an example i start msn messenger the installer for messenger would start
i canel it and then program will start.
it seems that any program that was installed using windows installer has
this problem

I`ve Tryied using the Windows Installer CleanUp Utility it works ok, but i have to reinstall the program that i "cleaned up" and then the problem comes
back .

Any ideas
Thanks
Brendan
 

Answer:Installer runs everytime a program starts.

10 more replies
Relevance 69.7%

Hi all and nice to meet you

I tried to search the answer around the web without a positive result.
I've a customer where we're running a windows 7 machine with something like a supervisor software

Over the same machine (windows 7 x64bit) I've configured a standard screensaver using the built-in option inside windows.

The question is: how can I setup the screensaver in order to stop it everytime the supervisor software goes in alarm ?

Thinking about the same situation with Outlook, how can I setup the screensaver in order to stop it evrytime I receive a new email ?

Thanks in advance for your feedback
Alessio

More replies
Relevance 69.7%

hi,

after i installed sp2 i try to start a program and the windows installer for
that program would run and i would have to cancel the installer before the program would start.

for an example i start msn messenger the installer for messenger would start
i canel it and then program will start.
it seems that any program that was installed using windows installer has
this problem

I`ve Tryied using the Windows Installer CleanUp Utility it works ok, but i have to reinstall the program that i "cleaned up" and then the problem comes
back .

Any ideas
Thanks
Brendan
 

Answer:Installer runs everytime a program starts.

10 more replies
Relevance 69.7%

Everytime i try and open a program i get a bad image error...i.e. chrome.exe- Bad Image C:\ProgramData\api-ms-win-core-memory-[1-1-032.dll is either not designed to run on Windows or it contains an error.
I have windows 7 and dont know how or why this started happening if anyone know any information please share
Thanks!
 

Answer:Bad Image error everytime i open a program please help!

This looks like your Solved thread. If it's not solved use the button at the upper left of the page to mark it Unsolved. Please do not open multiple threads on the same topic.
 

1 more replies
Relevance 69.7%

GMER log came up emtpy, but on Safe Mode. I cannot open it regularly.

Answer:Virus Alert everytime I open a program

Hello and welcome to the forums!My secret agent name on the forums is SweetTech (you can call me ST for short), it's a pleasure to meet you. I am very sorry for the delay in responding, but as you can see we are at the moment being flooded with logs which, when paired with the never-ending shortage of helpers, resulted in the delayed responding to your thread.I would be glad to take a look at your log and help you with solving any malware problems.If you have since resolved the issues you were originally experiencing, or have received help elsewhere, please inform me so that this topic can be closed. If you have not, please adhere to the guidelines below and then follow instructions as outlined further below:Logs from malware removal programs (OTL is one of them) can take some time to analyze. I need you to be patient while I analyze any logs you post. Please remember, I am a volunteer, and I do have a life outside of these forums.Please make sure to carefully read any instruction that I give you. Attention to detail is important! Since I cannot see or directly interact with your computer I am dependent on you to "be my eyes" and provide as much information as you can regarding the current state of your computer.If you're not sure, or if something unexpected happens, do NOT continue! Stop and ask!In Windows Vista and Windows 7, all tools need to be started by right clicking and selecting Run as Administrator!These instru... Read more

2 more replies
Relevance 69.7%

Hi there!

So I've been getting this BSOD problem for a few months now and it actually hasn't hassled me too much in the past since I'm a good "saver" and it typically was a good reminder for me to get up and take a break every now and then. The problem recently has gotten much worse, however.

It typically happens when I'm running a program called "FL Studio", a program for music production. The BSOD usually occurs when switching songs or when recording from my external soundcard/interface, the Digidesign MBOX 2... I've since uninstalled the program until I can fix this issue

Now I know there's a whole slew of combatting drivers playing a role in this problem. Or maybe I don't know the gist of it at all--that's where I'm hoping you folks can lend a hand.

? OS - Windows 7
? x86 (32-bit
? Originally had Vista installed.. did a clean install of Windows 7 (not upgrade)
? Purchased from a retailer
? Hardware is roughly 2 years old
? Windows 7 was installed over the summer (July of 2010)
? CPU - AMD Athlong 64 X2 Dual Core Processor 6000+ 3.00 Ghz
? Video Card - NVIDIA GeForce 8400 GS
? MotherBoard - Asus M3N72-D
? Power Supply - brand & wattage -How do I find this?

I attached the .zip file too!
Hope to hear back soon

Thanks!

Answer:BSOD problem.. typically in same program everytime

take the side off the case and look at the label on the psu for the details

3 more replies
Relevance 69.29%

I have a program called Replay 4 from AppAssure.com.  this is a backup and recovery software.  I am running Windows 7.  On an XP machine a standard user can access the program but on a Windows 7 machine a standard user cannot access that
program.  they are asked to enter an administrator credentials.  The UAC pops up.  How can I allow a standard user to access this application without having to enter admin rights.  I do not want to give admin rights to my users nor do i
want to disable the UAC.  When I check on the .exe file of the app it does not have the checkmark on the "Run this program as an administrator" checked.  How do I resolve this.

More replies
Relevance 69.29%

whenever i try to open the explorer, view and track downloads pops up multiple times asking for "run or save". nothing happens even if i click on either of these. I fi try to download an appplication and run, only the view and download pops up and nothing happens.
 
But i could able to open the explorer in guest mode, and if i need to run any donwloaded application it asks for an admin password and again the screen pops up and i couldnt able to run any application.
 
please help on this

Answer:"view and track downloads" pops up every time when trying to run a program

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware (MBAM) to your desktop.NOTE. If you already have MBAM 2.0 installed scr... Read more

7 more replies
Relevance 69.29%

on the computer start up a IE window pops up, with an ad for trend-micro to buy a expiring program that I do not have.

I have had to restart my computer 10 times from fresh in the past two weeks, last week I had to use the two disk to start it again, I also just had to go into user accounts and create a new account because windows would only open in temporary run, and I would loose it all when i turned it off, just did the new account a little while ago, have not turned it off since, I google "cannot find local profile" and was given the directions to create a new account.

running XP
running avast
I use firefox
spybot
tried malwarebytes,
some times they find things like doubleclick, redo, faxclick, ad revolver, bluestreak.

they remove them, and next time there will be more.

I did print screen when IE opened last time,

thanks

PS< I just saw that the title is wrong I have IR instead of IE, Internet Explorer. can not figure out how to delete it or edit it???

Answer:on start up IR pops up with a trend-micro ad to buy an expired program

Hi,I'm sorry for the late reply. Please do the following:Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on Download_mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back a... Read more

1 more replies
Relevance 69.29%

How do i run SRVMGR.EXE on a Windows 7 box to manage Windows XP and Windows 2003 server.
This tool runs on Windows XP but not on Windows 7.

Answer:Application popup: SRVMGR.EXE - System Error : The program can't start because NETUI0.dll is missing from your computer. Try reinstalling the program to fix this problem.

Hi,
To run Server Manager on Windows 7 you need to download and install the Remote Server Management toolkit from MS.

Info link:
http://technet.microsoft.com/en-us/library/dd759202.aspx

Download link:
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=7887

Hope this helps.Spencer
TechNet Community Support

2 more replies
Relevance 68.88%

I am looking for a way to run a particular program as the Domain Admin without the users seeing any prompt for username or password. Any script would do, I can put the users that need it into another group and have that group have its own logon script or just run it locally upon startup. We are running XP workstations on a Windows domain network.
 

Answer:Runas Domain Admin for a program seamlessly everytime

You need it to run as Domain Admin or as a Local Admin. Domain Admin would probably be really bad policy.

I think EPAL can do what you need, but I'm not totally sure.
 

1 more replies
Relevance 68.88%

Hey,

Everytime I download a program, say mIRC or something, when I try to open up the install program it says Encountered a problem and needs to close. The mod name always says nview.dll aswell, so I don't know if that has something to do with all this. Anyway it is really starting to bug me and I really need help with this, as I try to install anything I need like an update for Black Hawk Down game or mIRC or winrar it all comes up with encountered a problem.

Can anyone help me with this because I really need help with it?

The error signature says

AppName: mirc63.exe AppVer: 6.3.0.0 ModName: nview.dll
ModVer: 6.13.10.3190 Offset: 00009ddf

It says this for just about anything.
Thanks
 

Answer:Everytime I download a program, encounteres a problem when I try to install

6 more replies
Relevance 68.88%

Hi there I tried everything I know to do from uninstalling and reinstalling drivers as well as programs in order to fix a BSOD issue I have been getting.

I have a razer blackwidow keyboard and it has a configurator to assign values to keys. However when ever I try to launch the program nothing seems to happen. But when I check my task manager's processes its there. SO I tried to end-task the configurator and the whole system crashes. And it is only with this program that i find this issues and I can replicate the results every time I try it. I have also had this program work fine before so I cant figure out what it is. I tried googling however there didnt seem to be any solutions for this particular problem.

I Was hoping you can take a look at these error reports and help me figure out whats wrong.

Windows 7 SP1 - x64 - Windows 7 - OEM

- My RAID 0 Boot drives which is the OCZ Vertex 30GB x2 is about 1 1/2 to 2 years old the rest are less than 6 months old. - I Have Not reinstalled the OS
Thank you So much

Answer:BSOD Everytime I Try to EndTask a Specific Non Responsive Program

Crashes are being caused by your Thermaltake MS1 driver. Do you have any thermaltake components connected? You say you have a razer keyboard. If you used to have it the driver might be conflicting with your razer.

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Jun 25 16:35:47.234 2011 (UTC - 4:00)
System Uptime: 0 days 0:16:53.139
*** WARNING: Unable to verify timestamp for MS1Filter.sys
*** ERROR: Module load completed but symbols could not be loaded for MS1Filter.sys
Probably caused by : MS1Filter.sys ( MS1Filter+4450 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000046 - An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
BUGCHECK_STR: 0x3B
PROCESS_NAME: BlackWidowConf
FAILURE_BUCKET_ID: X64_0x3B_MS1Filter+4450
BiosReleaseDate = 03/08/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 3619
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Jun 25 16:03:54.433 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:26.339
Probably caused by : ntkrnlmp.exe ( nt!RtlRaiseStatus+18 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000046 - An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
B... Read more

5 more replies
Relevance 68.47%

Help with Trojan, malware - cant execute any program - security window opens
 

Answer:Cant execute any program - Security Alert pops up - detplock, dyzap,

Hello,

How many profiles do you have on this PC?
 

0 more replies
Relevance 68.47%

Ran SPYBOT SEARCH AND DESTROY. could not remove 3 "wildtangent" programs due to being in use.Any help would be appreciated. Thank you.Todd Log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:11:49 AM, on 10/17/2008Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16735)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\uesiuqcr.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\System32\WLTRYSVC.EXEC:\WINDOWS\System32\bcmwltry.exeC:\Program Files\Lavasoft\Ad-Aware\aawservice.exeC:\WINDOWS\system32\spoolsv.exeC:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exec:\program files\mcafee.com\agent\mcdetect.exec:\PROGRA~1\mcafee.com\vso\mcshield.exec:\PROGRA~1\mcafee.com\agent\mctskshd.exec:\PROGRA~1\mcafee.com\vso\OasClnt.exeC:\PROGRA~1\McAfee.com\PERSON~1\MpfServ... Read more

Answer:Not able to remove program that pops up on task bar and says I have spyware and keeps opening ads to various products.

Hello tntdreamsWelcome to BleepingComputer ========================Download random's system information tool (RSIT) by random/random from here and save it to your desktop.Double click on RSIT.exe to run RSIT.Click Continue at the disclaimer screen.Once it has finished, two logs will open. Please post the contents of both log.txt (<<will be maximized) and info.txt (<<will be minimized)

25 more replies
Relevance 68.47%

I am trying to work on a friend's computer. She had downloaded Super Antispyware before all this started happening. We can no longer access any applications, sytem info, or anything. i.e., If you click on the Control Panel, then Add or Remove Programs, the pop up comes up that says:
C:\WINDOWS\System32\rundll32.exe
Application not found.
Also, if you click on an icon on the desktops let's say for IE the window pops up that says:
Open With
Choose the program you want to open the file. IE is actually the only one that will open after this pop up.
Anything else, such as, Cache Cleaner, Yahoo Messenger, the Open With box pops up but I have no idea what program to use for any of these items, or how to access them.
Did something happen while running antispyware? Is there a virus? The system was running super slow before this, and getting lots of popups. Which is why I suggested to her to download SuperAS.
 

Answer:Solved: Open With Program box pops up all the time ...can't access any applications.

HollyG, Go to the link below and scroll down to line 12 (left column) and click on "EXE (lnk and regfile) Fix for Windows XP" to download a reg file fix. Save the REG File to your hard disk. Double click it and answer yes to the import prompt.

http://www.kellys-korner-xp.com/xp_tweaks.htm

If you can't access the Internet use another computer to download it onto a floppy or CD and transfer it to the problem computer. If you can't run the file do the following:

Press CTRL-ALT-DEL and open Task Manager. Once there, click File, then hold down the CTRL key and click New Task (Run). This will open a Command Prompt window. Enter REGEDIT.EXE and press Enter. Once regedit is open click File>Import and locate that reg file fix, hilite it and click Open.

Tufenuf
 

3 more replies
Relevance 68.47%

A few months ago I had Conduit control center appear on my PC and I removed both it and Search Protect by Conduit from my computer and removed all the files associated with them (or so I thought) yesterday when my computer started I received a long string of repeating errors, I also receive an error every time a program initializes. Here is what the errors look like:
 
 
    C:\PROGRA~2\SearchProtect\SearchProtect\bin\VC32Loader.dll is either not designed to run on Windows or it contains       an error. Try installing the program again using the original installation media or contact your system administrator or the     software vendor for support.
 
    C:\PROGRA~2\SearchProtect\SearchProtect\bin\VC64Loader.dll is either not designed to run on Windows or it contains       an error. Try installing the program again using the original installation media or contact your system administrator or the     software vendor for support.
 
 
Try as I might I can't figure out how to remove these errors and so here I am, asking for assistance. Even while running FRST64.exe I got 6 of the errors while the scan ran.
 
 
Here is the information from FRST.txt:
 
 
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 11-03-2015
Ran by Owner (administrator) on OWNER-PC on 15-03-2015 15:10:04
Running from C:\Users\Owner\Downloads
Loaded Profiles: Owner (Available... Read more

Answer:SearchProtect VC64Loader.dll 'Bad Image' recieved everytime a program starts

Hello MyDearBrutus and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.
 
My name is Yılmaz and I'll help you with the cleanup of malware from your computer.
Before we move on, please read the following points carefully.
Please complete all steps in the specified order.
Even if tools don't find malware, I want you to post the logfiles anyway.
Please copy and paste the logfiles directly into your posts. Please do not attach them unless you are instructed to do so.
Read the instructions carefully. If you have problems, stop what you  were doing and describe the problems you encountered as precisely as  you can.
Don't install or uninstall software during the cleanup unless you are told to do so.
If you can't answer for the next few days, please let me know. If  you haven't answered within 5 days, I am assuming that you don't need  help anymore and your topic will be closed.
I can not guarantee that we will find and be able to remove all  malware. The cleaning process is not instant. Please continue to review  my answers until I tell you that your computer is clean
Please reply to this thread. Do not start a new topic
As my first language is not English, please do not use slang or idioms. It could be hard for me to understand.
Please open as administrator  the computer. How is open as administrator  the computer?
Disable your AntiVirus and AntiSpyware applications, as they will  interfere with our tools and ... Read more

6 more replies
Relevance 67.65%

I downloaded a free software for editting and burning my home digital video tapes to DVD, "BurnToDisk" via forum.videohelp.com. But when I try to open it I get a message, MSVCR100.dll can't be found. How do I replace it. Or do you know of/should I try a different editting software? I can still open and use the free software that came with various cameras I have bought over the years. But their bit rate onto the final DVD is too low and I am getting blur/checkering (pixelation?) on action scenes.

Answer:Downloaded a free DVD editting /Burn program but MSVCR100.dll missing pops up?

See this Microsoft fix which sounds like the same problem you have.

4 more replies
Relevance 67.24%

Ran a scan of malwarebytes and ZOEK a number of days ago and have been having difficulties with my internet.

I have a dsl modem that's wifi capable, wifi works fine on all other devices, however the computer that it's plugged into can't access the internet.

The event log shows error 0x79, your computer was not assigned an ip from the network by the DHCP server.

Did a number of the netsh, ip /renew, /release, ect commands to no avail.

Any clue as to what's going on?
 

Answer:Unidentified Network, No Internet Acess after

This topic will be closed due to presence of pirated content.

Piracy policy
 

1 more replies
Relevance 67.24%

Recently re installed windows 7 onto my laptop and now I have been unable to connect to internet. I usually connect to the internet through Ethernet cable. My first issue was that the Ethernet controller driver needed to be updated, after updating it now I get the message that I am connecting to an unidentified network with no internet access. When I connect the Ethernet cable to another laptop it works perfectly. I have done alot of the command prompts already. and I have been googling and everything that I have come across has not worked . Any help is greatly appreciated.

ipconfig /all with plug out

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : paulfamily-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8152/8158 PCI-E Fast Ethernet C
ontroller (NDIS 6.20)
Physical Address. . . . . . . . . : 00-26-6C-98-B4-D0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{BAA04D62-65B5-4E9B-AE99-F54E51C1BD68}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . ... Read more

Answer:Unidentified Network- No Internet Acess

Outside chance that it is a driver issue, so make sure you have the latest driver from your PC (or motherboard) manufacturer's web site.

But, probably the NIC or cable is defective. I didn't find the specs for that ethernet adapter, so don't know if it is gigabit or 10/100 Mbps. Remember that the former uses all eight wires while the latter uses only four.
 

1 more replies
Relevance 66.42%

I have litterally tried everything (besides full reset)
to fix this problem, i need my documents on my laptop but i have this shitty unidentified network problem.
This site is my last hope.
My pc is a Packard bell with a Qualcomm Atheros AR5B91 Wireless adapter
and YES i have tried to delete the adapter and reinstall it
i have tried cmd commands like netsh winsock reset idk what it is
But im a rookie with computers can the comunitty please help me?
Im really pissed off about this problem.

More replies
Relevance 65.6%

Dear Experts I have some problem with my Lenovo y460p laptop - "A Custom Program Settings" window randomly appears when I am working, and strange text appears in a text document, as if a key is held down (though the text editor shows the pipe symbol, rather than a common character).The shift key appears pressed when I check the ON SCREEN keyboard. This happens always and if I hit my keyboard then it will be fine for some time and again happens just like that. I am using an external keyboard now. My laptop is out of warranty period. Please let me know how can this be resolved.  Thanks Pravin 

Answer:Y460p Keyboard issue - Custom Program Settings window pops up and "|" character appears continuously

Hi
 
Welcome To Lenovo Community
 
This issue is caused by software called GuardedID software
 
Prevent GID application from Starting Up  

Click Start
Click Run
Type "msconfig"
Select "Startup" tab
Unchecked GID desktop application
Press OK then reboot laptop.

or
 Uninstall GID Application from Windows 

Click Start
Click Control Panel
Click Add / Remove Programs
Search for "GID" / "GID Desktop Application
Select the item and select uninstall
Reboot when uninstallaion is done.

http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Typed-letters-appearing-as-increasing-num...
 
http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Y560-Custom-Program-settings-keeps-poppin...
 
 
Hope This Helps
Cheers!!!
 
 
 
_______________________________________________________________________________________________
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
 
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
 
Follo @LenovoForums on Twitter!

2 more replies
Relevance 65.6%

I am unable to connect to the internet through ethernet, it says unidentified network. I have tried searching this problem and trying the solutions suggested all of which do not work, This is the first time i have booted up this computer after i brought it out of storage and did a system reset. Please help
 

Answer:Unidentified network acess: limited connecticity on ethernet

I saw other posts where people wanted to see results from ipconfig /all so here that is
 

3 more replies
Relevance 63.96%

Hi guys I'm new here; I have a problem using the internet...I use firefox and everytime the internet explorer pops up with random stuff; it's getting annoying. I tried to scan the system with HijackThis, but I don't know what's the problem and don't want to delete anything I don't know of. Here is the log:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 20:40:55, on 24/05/2010
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18904)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Windows\Cpahua.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Motorola\SMSERIAL\sm56hlpr.exe
C:\Program Files\Realtek\Audio\HDA\RtHDVCpl.exe
C:\Program Files\AVG\AVG9\avgtray.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\Synaptics\SynTP\SynTPHelper.exe
C:\Program Files\iTunes\iTunes.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HiJackThis\HiJackThis.exe
C:\Windows\system32\DllHost.exe
C:\Windows\system32\SearchFilterHost.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.google.co.uk/
R1 - HKLM\Software\Microsoft\Internet Explorer\M... Read more

Answer:IE Pops Up Everytime using Firefox

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

In IE, go Tools > Internet Options > Connections > LAN Settings and untick 'Use a proxy server for your LAN' or reconfigure the Proxy server again in case it was previously configured, then 'OK' your way out.

In Firefox, go Tools > Options > Advanced > Network > Settings and tick 'No Proxy', then 'OK' your way out.

------------------------------------------------------

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post/attach the logs in your next reply.

If you have trouble with one of the s... Read more

2 more replies
Relevance 63.14%

Hi,
I get a StatusMonitorHost error pop up everytime I log onto my user account (on XP). I haven't been able to find out any information on this error message and what to do to fix it..any ideas?
Thank you.
 

More replies
Relevance 63.14%

Hi guys i wonder if someone here could help me with my problem, i have a fresh installed os windows 7 ultimate 64 bit. And everytime i open a browser cmd keeps on popping up with but instantly closes..

i have already did a Full System Scan with my Antivirus kaspersky 2012, Did a Full System Scan using MalwareByte's Anti-Malware, Did a Full System Scan using SuperAntiSpyware found some infected files but still the cmd popup thingy is still there heres a copy of my hijackthis log file..

http://www.4shared.com/file/bHpI0vjs/hijackthis.html?

thanks primo

Answer:ms dos pops up everytime i open a browser

Please copy and past the log into a reply and I will merge it into your post above and remove my reply. The method you have employed to post your log is too roundabout.Please note that I am not a member of the Malware Removal Team and will not be assisting you in removing the infection. I'm simply helping you to post the information they need in order to assist you.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.Orange Blossom ~ forum moderator

35 more replies
Relevance 63.14%

Every time i click something an error pops up that says "This file does not have a program associated with it for performing this action create an association in the set associations control panel. Please Help and when i say click everything i mean. the only way i can get things to work is if i right click and it will say run as administrator and then it will work but that is just annoying please help.

Answer:Help everytime i click anything an error pops up

Did this just start? If so, what led up to it (virus, error, new hw, sw, etc)?

1 more replies
Relevance 63.14%

We get a message from the web page, object does not support pop up everytime we move from a web page. Very little computer knowledge, can anybody help?

Answer:Message from webpage pops up everytime!

Welcome aboard Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish. * If an update is found, it will download and install the latest version. * Once the program has loaded, select Perform quick scan, then click Scan. * When the scan is complete, click OK, then Show Results to view the results. * Be sure that everything is checked, and click Remove Selected. * When completed, a log will open in Notepad. * Post the log back here.Be sure to restart th... Read more

1 more replies
Relevance 63.14%

Guys,
 
I have a got a new problem now.
 
Everytime I open the IE , it gives me this Manage add-ons windows. and talks about the Default Search. which I don't want to come..
 
I have downgraded the IE to default IE8. still the same. I have tried adding the "Bing" search to the Search Providers. No go.
 
I have tried to deleted the 3 registry value suggested by the Microsoft support. Still the same issue.
 
I have again tried upgrading it back to the IE 9, thinking if that could fix the issue. Still the same issue. :-(
 
I have run the Malwarebytes & the Hitman pro to check for infections & removed the infections which was there. Still the same.
 
Any other suggestions please??...
 
Please help me guys...
 
Thanx in advance.

Answer:manage add ons pops up everytime i open ie9

If Google is set for your default search provider, you need to remove it from the list, or simply choose another search provider.
 
1. Goto Tools-Manage Addons
2. Remove Google from the list if it's listed
3. Choose another provider. If none is showing up, then simply click "Find more search providers" on the bottom.
4. Choose one from the list.
 
*Note if you only have 1 selection in the Addons list, it will not allow you to remove it. You have to have more than 1 in the list*

14 more replies
Relevance 62.32%

I have checked msconfig and the only programs there under the startup tab work just fine. I looked at the start/all programs/startup folder and its empty. This unknown shell of some program (just a blue box image) used to pop up very seldomly on boot up, but now seems to pop up every 3 or 4 days and the image now stays there for several minutes whereas it used to disappear after 3 or 4 seconds. How can I trace it to delete it? Done all the virus scans etc.

Answer:"ghost" image of unknown program pops up occasionally on boot up?

You could try this method of finding where the program file is located. Download Home Folder from this page

Put a shortcut to Home Folder in your startup so it will be in the tray after Windows starts. If the mystery window displays, click on it to give it the focus. Press hotkeys Shift-NumPadSubtract (hold down a shift key while pressing the minus key on the number pad.) If it can, Home Folder will get the location of the exe file that owns the window. This should at least give a clue what it is and where it is.

8 more replies
Relevance 62.32%

hello, when ever i load an explorer window, it loads a popup saying that my computer is infected with a win32 trojan or something..

i have scanned my computer with adaware and spybot, didnt really find anything.

EDIT- i thought i would mention that this pops up even when i load the explorer, like when i launch "run..". or even open a file folder.

here is what it says,
Your browser was hijacked by Trojan.Win32.Agent.akk
You need to clean you system immediately, in other case it can be crashed soon!
Click OK to download the high-tech antispyware protection software! (recommended)

here is my hijackthis log:

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 10:38:40 AM, on 12/6/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Intel Audio Studio\IntelAudioStudio.exe
C:\Program Files\Google\Google Talk\googletalk.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\Logitech\G-series So... Read more

Answer:Solved: problem with IE, pops up window everytime.

13 more replies
Relevance 62.32%

I'm working on a friends pc[xp],and everytime I try to access anything an "ACTIVE X"warning pops up asking "do you want to allow software such as active x controls and plug ins to run".I've clicked "yes" once,but it pops up every time again and again!Help!

Answer:active x!!warning pops up everytime on explorer...

It's all about his security settings.Start>Right click the IE icon (not the short cut) Choose 'Properties or Internet Properties' in the pop-up menu click the 'Security' tab. Scroll down to the various settings for Active X.

7 more replies
Relevance 62.32%

So for a couple of days theres been cmd popping up every time i start up my pc and it shows for 1 sec and disappears, i checked my running processes and scanned with hitmanpro and malwarebytes and also checked procexp and i don't find anything strange there, any reason why this is happening?

Answer:Blank CMD pops up everytime i start windows

Welcome onboard.

Start > In the Search field type msconfig > msconfig.exe > In the System configuration Window Startup

That will show you all the stratups. Check which program runs the Command Cmd.exe

In my case it is the AMD Accelerated Video Transcoding device initialisation. ( It can be some other program like Nero etc., too)



As long as you know that it is a genuine program starting and closing it you need not bother and can let it be as I have done/do

If you want you can uncheck it to keep it starting/staring - sorry scaring you at startup . I wouldn't advise modifying/deleting the Registry "Run" entry pertaining to it though.

1 more replies
Relevance 62.32%

I need help I've just uninstalled Internet Explorer on my laptop and I've deleted everything related about Internet Explorer Including the Internet Explorer Folder Located in Local Disk (C: )/Program Files. Then after I've restarted my laptop I opened a folder and instead of the folder opening in the same window, it opened in a new window. I've tried Researching the internet for help but the result was frustrating. I've even tried the folder Options by Clicking the "Open each folder In the same Window" Button but Nothing Happened . I'm Using an Acer Windows 7 Ultimate Laptop

Answer:New window Pops Up everytime I open a folder

Sorry if this sounds kind of vague, but I believe IE is used for some filing that is offline as well. Again, I am not the most knowledgeable about this, I am sure someone will chime in here shortly...

9 more replies
Relevance 62.32%

If i bootup my laptop(i'm now using an old desktop) Everytime system recovery pops up. I can't turn it out. Even how hard i try! Please someone help me!

I'm using Windows 7 64 bits (dutch version(don't know if that matters))

Answer:Everytime system recovery pops up at startup

this might help
Startup Programs - Change

please let me know if i have helped you

3 more replies
Relevance 61.91%

LOOK:
http://img469.imageshack.us/my.php?image...

i dont know what to do! i dont even know if i have the program installed becaused i've tried several times to uninstall it and cant
find the folder where it is installed. I've
tried remove programme from control panel,
ccleaner and tune-up utilities uninstall
manager.

thanks for your time.
 

Answer:Window pops up everytime i right click a folder or file

tsuwal said:

LOOK:
http://img469.imageshack.us/my.php?image...

i dont know what to do! i dont even know if i have the program installed becaused i've tried several times to uninstall it and cant
find the folder where it is installed. I've
tried remove programme from control panel,
ccleaner and tune-up utilities uninstall
manager.
thanks for your time.Click to expand...

Howdy tsuwal
I just did a google search on this and it seems to be something to do with the source code of whatever you are tryin to look at
I'm not sure what causes it and it may be something to do with flash but I'm not sure.Hopefully this will bump you up the queue and someone with more knowledge will be able to help you.
Regards Paula :S
 

1 more replies
Relevance 61.91%

You know what I'm talking about. The annoying freaking green slider that indicates how high the ovlume and/or the brightness of the screen is everytime you hit the Fn up/down arrows. Can someone please tell me how to get rid of that? I'm on a Y560 notebook running Windows 7. I hav already looked for "On Screen Display" in my Control Panel Appearance options as well as the Hotkey driver, unable to find any of the two. Someone please tell me how to disable this?!!!

Answer:Need help with the volume/brightness control slider that pops up everytime I hit Fn up/down, etc.

Maybe un-install Hotkey driver?

1 more replies