Computer Support Forum

AC adapter type cannot be determined

Question: AC adapter type cannot be determined

I had to replace the power cord (from the outlet to the box) on my AC adapter. It worked fine for awhile; but now I'm getting this message on boot up. "Warning. The AC adapter type cannot be determined. This will prevent optimal system performance. Please check AC adapter is connected properly. Remove AC adapter and plug it in again." I tried plugging it in again several times to no avail. Then my virus program (Trend Micro PC-cillin Internet Security 14) popped up a window to start in Safe Mode to fix the problem. I know how to start in Safe Mode but don't know what to do once I'm in there. Any help will be appreciated.

Relevance 100%
Preferred Solution: AC adapter type cannot be determined

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: AC adapter type cannot be determined

16 more replies
Relevance 91.02%

Dell Inspiron 5755 with a 17" display, running windows 10 and the latest BIOS version from Dell(as of 3/2/2017). AC adapter power supply is a 45W, 19.5V, 2.31A, Dell power supply. It works fine and is not damaged, (lite is lit on the brick and proper voltage out verified by using a VOM). When running on battery for a while and the battery low window pops up, I plug in the power supply and immediately get a message "The AC adapter power type cannot be determined. Your system will operate slower and battery will not charge". I ordered and tried another Dell 45W power supply. Same issue. I right clicked the battery icon in the system tray to display the Dell Power Manager. It says my battery is fine, 100% normal. As I unplug and plug in the power supply while the Dell Power Manager is up, I can see the word "charging" displayed in the management window for a bit, but then it disappears. The battery Icon itself shows that the power supply is plugged in as it displays a male electrical plug. If I remove the battery the laptop powers up fine. The BIOS in this machine does not display the charging device information, just that the battery is 100% normal. While in BIOS I hit the F9 key to reset basic bios functions to no avail. I also tried uninstalling the AC adapter and ACPI- compliant control method battery and re-booting to no avail. I can get the original power supply to charge a low battery by continuously unplugging and plugging back in the connector t... Read more

Answer:AC Power Adapter type cannot be determined

Since you've tried a new Dell adapter to no effect, next suspect is the DC jack -- replace this part:
www.parts-people.com/index.php
If that doesn't solve the problem, it's the mainboard that's bad.

1 more replies
Relevance 91.02%

Hi!

Awhile ago, I started getting this error message when I started up my computer (after the initial Dell screen). It stated:

The AC adapter type cannot be determined. This will prevent optimal system performance.

Strike the F3 key (before the F1 or F2 key) if you do not want to see power warning messages again.

Strike the F1 key to continue, F2 to run the set up utility.

-----

I ignored this problem for awhile by just hitting F1. However, within the last month, it has gotten worse. Instead of this error message coming up when I started my computer - after the initial Dell screen, nothing would come up except a little flashing line in the top left hand corner of the screen, and the computer would not start up passed that. I proceeded to fiddle with the plug that I plug into my laptop from adapter. I would push it harder into the laptop and/or twist it in after I hit the start up button, waiting to see if, after the initial Dell screen, I could get the error message to come up again so I could hit F1 so my computer would actually start up. I really don't know if any of that helped, but I figure if it was the adapter, then I should try something like that. I even blew it the plug and into the socket in the laptop tonight. However, tonight, I almost could not get the computer to start up all the way - I kept getting the screen with the little blinking line after the initial Dell screen and no error message. Eventually, after trying several times, I did get the error ... Read more

Answer:The AC power adapter type cannot be determined.

7 more replies
Relevance 91.02%

Hi everybody... my step daughter is having a problem with her dell precision m6300 laptop. Whenever she turns on her laptop, she gets the above message. The laptop will not go past this screen without the current plugged in. I also cannot access the bios menu or any setup menu or the desktop. It's just stuck on this one screen. I'm thinking it could just need a new charger but I'm not sure, any help would be appreciated.
 

Answer:Ac power adapter type cannot be determined

Closing dup. Please do not start multiple threads on the same topic.
 

1 more replies
Relevance 91.02%

So.. I see this problem has been posted about before, so I just wanna know what my options are.
This problem actually popped up on me a few months ago, but I was able to remove and insert the power cord a few times and the message would go away and I would be able to charge my battery. But as a month or two passed, it became more finicky, and I had to jiggle with it a little more, but still, I was able to charge my battery and use my laptop wire-free.
Now today, I've been trying all day, and cannot for the life of me get the battery to charge. I get the following message when I plug the wire in.
"The AC power adapter type cannot be determined. Your system will operate slower and the battery will not charge. Please connect a Dell 65W AC adapter or higher for best system operation."
Also, I think its worth nothing that a lot of people mention that this error message comes up while they are booting their Laptops, mine only comes up once Vista is loaded and I attempt to reinsert the cord.
So, I have tried another Dell charger, a 90W one, and the same problem does occur (My original is a 65W). I am planning on getting a different battery tomorrow to see if it is the battery, as this ones usable life was getting quite low, down to barely a half hour per full charge. My warranty, although I'm not sure of the specifics, was not expired when this problem first came up, but is now expired by I would say 2 months at the most.
Oh, I have a M1330, and I have gotten... Read more

Answer:AC Power Adapter Type Cannot Be Determined

At a minimum, the power jack on the mainboard needs to be replaced - if that doesn't fix it or a competent repair shop tells you it won't, you'll need to replace the system board.
 

more replies
Relevance 91.02%

Hi everybody... my step daughter is having a problem with her dell precision m6300 laptop. Whenever she turns on her laptop, she gets the above message. The laptop will not go past this screen without the current plugged in. I also cannot access the bios menu or any setup menu or the desktop. It's just stuck on this one screen. I'm thinking it could just need a new charger but I'm not sure, any help would be appreciated.
 

Answer:ac adapter power type cannot be determined

16 more replies
Relevance 91.02%

I am getting this error message. My battery is not charging. And it is clocking my cpu speed to 0.5 GHz. I heard that there is a pin in the DC jack that tells a chip on the computer to tell the computer that the AC adapter is not suitable (whether damage or low wattage). I'm wondering if there is a way to disable the chip and just use it at full speed, I don't really need a battery because I'm mainly on AC use anyways.

Answer:The wattage and type of the AC adapter cannot be determined

Mine will do that if the plug is not all the way in.  It has happened to me twice now and I would have thought it would take more than 1/16th of an inch to cause the situation.
Sorry I don't know of a way to bypass this check.

2 more replies
Relevance 90.2%

Ok, I have read through these forums, and others, and have been unable to resolve this issue after trying like a million things. Here's my issue:
This is on a Dell Inspiron N4030 running Windows 8 Pro with Bios Revision A07.
On boot-up I get this message:
"The AC power adapter wattage and type cannot be determined.
The battery may not charge.
The system will adjust the performance to match the power available.
Please connect a Dell 65W AC adapter or greater for the best system performance.
Strike the F3 key (before F1 or F2 key) if you do not want to see this power warning message again.
Strike the F1 key to continue, F2 to run the setup utility."

If I strike F2 and go into the bios it says "AC adapter type    unknown"
If I strike F1 to continue boot-up it boots into windows and then the battery indicator shows "Plugged in, Not charging"

In attempting to fix this issue I have:

1. Replaced the battery.
2. Replaced the motherboard
3. Replaced the Power Board
4. Swapped out the adapter with several other Dell adapters we have in the house (we have 6 Dell laptops). Adapter revisions used are A00, A01, and A02.
5. Did the whole rigamarole here: http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/
6. Tried various combinations of plugging/unplugging at different intervals and at different speeds that I have read on multiple sites.
7. Reset the Bios by disconnecting the battery and AC adapter and the hold... Read more

Answer:AC power adapter wattage and type cannot be determined, please help...

Hi alexkharden,Great job done on the troubleshooting, we appreciate that you’ve tried all possible steps to isolate and resolve the issue.However, please try removing the battery and inserting on another Dell Computer and charge the battery for at-least 50%.Once the charge is completed kindly insert the battery back on your Inspiron N4030 computer also connecting the original AC Adapter.
Turn on the computer and flash the BIOS by clicking on the link below.http://dell.to/1dFtXxLType the Service tag and under Drivers and Downloads select the Operating system and select option BIOS and install the same.NOTE: In order to flash BIOS the battery needs to be charged at least 20%.Please try the above mentioned steps and let us know your findings.

12 more replies
Relevance 90.2%

My Dell Inspiron 6400 HDD damaged without any warning last week and cannot be repaired, so i had to replace it with another HDD. Everything works fine after that except that when i plugged in my AC adapter, the power warning message “The AC power adapter type cannot be determined. Your system will operate slower and the battery will not charge. Please connect a Dell 65W AC adapter or higher for best system operation" will appear, and my battery will not charge.

Previously this power warning message will occur only when i didn't plug in properly and it worked fine after i replug the adapter. Since i changed my HDD, this warning message appears everytime i turn on my laptop. I tried updating the BIOS but it doesn't help, the problem is still there. I suspect that my AC adapter is damaged but when i tried it with another Inspiron 6400, it worked fine without the warning message appearing, that shows that there isn't any problem with my AC adapter..

Any solutions for this? I hope i don't have to change the motherboard or whatsoever, because my laptop is out of warranty. Is it something to do with the configuration? - since i formatted my computer and reinstalled everything..

thanks heaps for any comments!
 

Answer:Power adapter type cannot be determined after replacing new HDD

You may have a damaged DC jack in the laptop if the adapter works on another laptop, which would go with you replugging the power adapter to clear the error in the past. Its not uncommon for the jacks to break from the motherboard and require re-soldering, in some cases the jacks crack or break and need to replaced. To get at the jack you will need to have the laptop completely disassembled.

P.S. 'spoiled' isn't not the correct term to use with failed electronics.
 

3 more replies
Relevance 88.97%

Hello, from few days a have problem with my AC power adapter.My system says: "The AC power adapter type cannot be determined... lalalala" when my Windows says Plugged in, not charging. CPU performance does not exceed 0,78GHz.I tried to uninstall the drivers - nothing.
I tried update my BIOS - nothing.
Replace AC - nothing
Exclude malfunctioning AC adapter.
Sometimes after a few connections begins to charge my battery, and it is a day where you do not try to charge.
But I found a solution, which is always charge my battery.
when i turn off the system, and then pulled out the battery. I push the button 'power on' for 10 seconds. And then I put back the battery and plug the charger. I turn on the system and everything works.
But once again, disconnect and plug the charger that stops charging

Where is the problem?

Answer:The AC power adapter type cannot be determined. Inspiron 15 3542

Hi WLODZIAK,
Are you using an original Dell OEM Adapter? When you plug in the adapter to the system, does the adapter stay firm or does it fall off easily? Is the adapter frayed? Is there any damage on the system?
Restart the system and press f2 key to enter BIOS - check the adapter status in BIOS with and without the adapter plugged in. Also, wiggle the adapter cable at the end and see if the status changes in BIOS at any point. Check the battery health in BIOS (if applicable).
Restart the system and press f12 key on startup - choose diagnostics. Let it run the diags and if you encounter any errors - make a note of the complete error and report the same to us.These are onboard diagnostics and they might possible pick some error if the hardware is not functional.
Since you have replaced the adapter, if the battery has good health, then then next part to be replaced would be the dc port - you would need this part - http://bit.ly/2d2vuCc
If nothing works, the motherboard might be at fault. 
If the system is under warranty, Please click my DELL-username and write me a private conversation with the service tag and your contact details(Name, Phone#, Address and Email). If there is no warranty, then you could contact our team to get a quote for a paid service call - http://dell.to/1vnT6CQ
Let us know if you have any other queries.

1 more replies
Relevance 88.97%

Hi,
I'm using an XPS 13 9350, and 'm currently having an issue whereby when I start up my laptop I'm receiving the error message.
"AC power adapter and type cannot be determined, the battery may mot charge, the system will adjust the performance to match the power available"
The laptop sticks at 1% and wont charge. Although the light is still on the adapter, the light does not appear at the front of the laptop where it would usually indicate charging, apart from occasionally brief moments before the laptop boots following pressing the on button.
I have forced the latest BIOS update past the 10% battery block, however this has not helped.
I've had the laptop and adapter roughly a year.
Any assistance would be much appreciated.

Answer:Dell XPS 13 9350 - AC power adapter and type could not be determined

If "roughly" is less than a year, call Dell for warranty repair.
If it's over a year, first thing to try is a new OEM Dell AC adapter -- most computer shops should have one you can try.  If that fixes it, replace the AC adapter.  If not, replace the DC power jack:
www.newegg.com/.../Product.aspx
And if that doesn't solve it, it's the charge circuit itself that's bad -- replace the mainboard.

1 more replies
Relevance 88.97%

Hi! I don't know what's the cause of my problem and will be appreciated for any info.
Suddenly, I started getting this message, when I turn my laptop on. It won't recognize my AC adapter, and won't charge the battery.
I have Dell Inspiron 6400/1505, windows XP.
I tried to flash BIOS, took out and put back in the battery. Check the plug, it looks ok. Battery's LED lights show it works fine.
I saw that so many people have this problem, but did not find any ways to solve it. Or any reasons why it happened. If anybody knows what to do, please share with us regular PC users.
 

Answer:The AC power adapter type can not be determined. Inspiron 6400

8 more replies
Relevance 88.15%

Sometimes the message says connect a Dell 45w adapter or higher. That is what I use. It's the original adapter. I've also received a message to use a 35w adapter. Sometimes it tells me to press F1 if I want to continue anyway.
Any suggestions?

Answer:Inspiron 7352 laptop AC power adapter type cannot be determined

First thing to try is a new OEM Dell AC adapter.  If that doesn't solve the problem, replace the DC power jack:
www.parts-people.com/index.php
And if that doesn't solve the problem, replace the mainboard.

1 more replies
Relevance 86.1%

This is a common problem (I see lots of posts)
The problem source is the [Dell] AC adapter.  PA-21 Family, 65W, P/N: NX061.  It is made in China.
I have an XPS M1330.  Using Dell after warranty service, replaced the Mother Board twice, replaced the battery twice, replaced the AC adapter twice - not fixing it.
Turns out the power warning message is very informative.  It states "Please connect a Dell 65W AC adapter or greater for best system performance".  So, I plugged in my Dell 95W adapter - WOW Problem Solved.
A lab test of my new Dell 65W AC adapter shows it to be 64.6 watts.  If this unit gets hot (like after several hours of use), it may not put out the full 65 watts - the system may not recognize the adapter, it may power the system ok, but won't charge the battery.
These units burn out after only a few months of use. Their cables are too fragile. If Dell's or their supplier's Quality Control can't produce a reliable 65W product - I found seveal "Made In USA" universal adapters.
 

Answer:AC Adapter - Alert - "AC power adapter wattage and type cannot be determined"

Well my solution was simple.
I just removed the battery pack and powered up my notebook. Then I turned off the notebook replaced the battery pack and VOILA. The error message was gone.

10 more replies
Relevance 72.16%

For the last two weeks, every time I start my Dell INSPIRON E1705 while using the power supply I am greeted with the following message. "The AC power adapter type cannot be determined. Your system will operate slower and the battery will not charge. Please connect a Dell 90W AC adapter or higher for best system operation". I press the F1 Key and everything works fine. I've read about this on other websites and most say it's a design flaw in the power supply after the cord has been properly wound around the supply as designed. Apparently a few of the cords internal wire strands become broken and cause this message. My computer is from June 2006 and shouldn't be having this issue so early...or ever. This seems like a flaw that should have created some type of manufacturers recall since so many people are having this issue. I'm of course out of warranty, will Dell replace this free of charge?
 
`

Answer:Power Supply - "The AC power adapter type cannot be determined....."

You are correct, the failure is due toloss of the power supply ID signal. Sometimes this happens because of strain on the plug, which breaks the signal wire. Some even are so severe that the insulation breaks away from the plug; this is due to rough handling. The other cause is one or more of the power socket solder connections to the system board become broken. This also is related to severe handling. I have seen one case where all three power connections and three of four mechanical connections were disconnected. If the power supply is bad, a replacement will cure the problem. If not, then the socket is bad, and this will require a system board replacement. If you are experienced, you can try to resolder the connections. I am experienced and was not able to get my daughter's E6000 to work by resoldered. More recent Dells are using a replacable power connection board which is a much cheaper repair.

64 more replies
Relevance 69.29%

...like Intel Northwood, etc. AMB Barton, etc...?


Thanks

Answer:How to determined type of CPU core...

http://www.cpuid.com/cpuz.php
cpu-z this is what everyone uses

3 more replies
Relevance 67.65%

My sister in law recently had the System Tool virus on her laptop and this was removed by installing Emsisoft Antimalware. I tested the laptop rigorously before it was returned to her in a fully functioning state. I have just had a phone call from her saying that on booting up she receives the message before anything else - "The AC adaptor type cannot be determined, this will prevent optimal system performance, please check AC adaptor connecting properly. Disconnect AC adaptor and reinsert, Thanks"Also on the accompanying black screen are the F1, F2 etc options for start up and only by pressing the F1 key does it boot up to perform correctly.This AC adaptor message does not ring true. Anyone with thoughts on this?

Answer:Error message AC Adaptor Type cannot be determined

Try thisclick hereBasically use F3 to avoid message again, but there are a number of suggestions as to what is causing it

6 more replies
Relevance 67.24%

I have an Inspiron 5758 (Win 10, original Dell AC adapter, 45W, no appearance of damage on male or female end, though truth be told, those are very small/hard to see well).  In the past when I've unplugged my laptop, if I don't plug it in almost immediately again, but run the battery a for a little while, when I plug the AC adapter back in, I get the old "plugged in, not charging" indicator in my taskbar. In the past when this has occurred I've followed various temporary solutions to get it return to "plugged in, charging," esp. the ubiquitous 12 step method of turning off/unplugging/removing battery/uninstall in Device manager/etc...  Sometime just unplugging and plugging back in repetitively works.
But now, none of that works.  After draining a battery to about 25%, I plugged it back in, and got  a "plugged in, charging" indicator for about 20 seconds and then a reversion to "plugged in, not charging."
In addition, I get the following message upon start up, "Alert!  The AC power adapter cannot be determined,. The battery may not charge. They system will adjust...Note: This warning can be disabled in BIOS setup" (which I did after lots of searching how to but that doesn't make a *** bit of difference)I've read countless community forum posts and followed all Dell tech suggestions about problems w/, AC adapters, have run diagnostics, updated my BIOS, etc. till I'm blue in the fa... Read more

Answer:AC Adapter Cannot Be Determined

It isn't clear if you've tried to solve the problem, but here's how you proceed:
Replace the adapter with a new OEM Dell AC adapter.  If that doesn't solve the problem, replace the DC jack:
www.parts-people.com/index.php
And if that doesn't get the adapter recognized, replace the mainboard.

2 more replies
Relevance 67.24%

my laptop says my AC power adapter type cannot be detected and i dont know how to enter the bios 

Answer:ac adapter cannot be determined

Hi intelligent person,
Thank you for writing to Dell Community Forum.
After you press the power button, on the Dell logo screen, keep tapping the <F2> key. This will take you to the BIOS. In BIOS please check what is the status of the adapter / battery listed as.
Update the BIOS and chipset drivers to the latest from the Dell support site.
Please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address.

1 more replies
Relevance 66.83%

Have the following 2 symptoms:

When turning it on, I get an error from BIOS which says AC type and wattage can't be determined and thus battery won't charge.
I have a spare battery which when inserted shows that is is 62% charged. But even with that, if I pull the power cord, the laptop doesn't stay on.

I have seen few posts regarding updating BIOS which I did. Doesn't seem to make a difference. Any suggestions.
This symptom started happening on this laptop at least 2 months ago when the laptop was in warranty. Unfortunately, I was a little late in calling Dell and the awesome Dell support says it is 25 days out of warranty so won't fix anything :-( So much for my 6th Dell laptop.

Answer:Inspiron 5559 13 months old - ac type & wattage cannot be determined....

First step:  try a new OEM  Dell AC adapter.
If that doesn't solve the issue, replace the DC power jack:
www.cdsparts.com/p-7764-new-dell-inspiron-5551-5555-5558-5559-vostro-3558-laptop-dc-jack-cable-kd4t9.aspx
One of those two parts should solve the issue -- if not, it's the mainboard that's bad.

1 more replies
Relevance 66.01%

PC Dell Inspiron ONE AIO win 7
This is what I get on boot up.
The AC adapter and wattage cannot be determined.
The system performance is unpredictable.
Please connect a Dell 180 Watt adapter and restart.
Or press F1 and continue.
It has the AC Addapter in use that came with the PC and has worked OK until now and still seems to be working OK.
I have been to the UK Dell site and I was going to email them unfortunately I cant as the first thing they want to know is the TAG Number and its not recognized. The PC is three weeks old and is registered.
I googled this and it seems to be common with laptops this is a desktop any advice would be appreciated.

Answer:The AC adapter and wattage cannot be determined. Dell

Three weeks old? Take it back, as there must be a glitch in the Dell software, I'd have thought.

9 more replies
Relevance 65.6%

Dell Battery Charging Problem Complicated
Could be one of those “Mother Board” Fixes but how can we get to the bottom of this?
The question is what allows the computer to determine the adapter wattage and type?
What part can I buy and rework on the board? Honestly the computer works fine minus this part.
Something is telling the computer to not charge the battery. Regardless if HDD is in the computer. Its something hardware related.
Warranty just expired last week =(
Latitude E6530
Other working units used to  test and swap components with is E6520 and E6540
NOTE** All batteries used and cables used are factory and known to work with other latitude computers. Using extended battery + dell 130W and 90W power supply with original batteries over 78% health on dell diagnostics.
Dell diagnostics shows 100% but the current in the battery is 0. Meaning it isnt charging. Downgraded to the lowest firmware too from the highest and it didnt fix the issue.
When the PC is shut off with battery inside, inserting a power cable will turn on the battery charging indicator symbol light. After 1 second it will turn off. Same thing while the computer is running.
Upon Boot :
ALERT! AC power wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available.
While running windows: Plugged in not charging.
Steps Tried:
Running windows 10 all current drivers
BIOS Update to 17 = No help
Blowing on the DC IN jack, tap... Read more

More replies
Relevance 48.79%

I would like to get a plug that would work in EU countries, if that is not available then a power supply. This is what the US plug looks like:













Solved!

Go to Solution.

Answer:Where can I get an EU type adapter to go on on the...

Hello, I found the part number of the "adapter" but I don't know if it is available in US:NC.20411.01YAC.CLIP.EU/KOR.WHITE

6 more replies
Relevance 48.79%
Question: adapter type

i just realize that my adapter type is still intel R hd graphic n yours is nvdia..
how to change it to nvdia?
pls help me

Answer:adapter type

Hello Dydiee, and welcome to Seven Forums.

Please fill out your system specs using the tutorial below to help so we can see what hardware you have.

System Info - See Your System Specs


This depends on what type of graphics card or chip on the motherboard for what option you have.

2 more replies
Relevance 48.79%

I would like to get a plug that would work in EU countries, if that is not available then a power supply. This is what the US plug looks like:

More replies
Relevance 48.38%

Microsoft said we'd be getting a Type-C adapter when the Surface Laptop was announced, so where in the world is it? Any ETA?

More replies
Relevance 48.38%

When i plug in HP USB type C to vga adapter i immediately get message "Try improving USB connection.  Display Port connection might not work. Try using different cable.".  This is the HP adapter  Cable accessory I ordered with the new HP Envy 17in notebook/laptop.  Tried different vga cable to HP monitor.  Both give same result.  Cannot connect to vga monitor.   Do I need to install a driver?   Do i have a bad type c  adapter?

More replies
Relevance 48.38%

I am planning on making this project myself but first I have one question. Here is the project I will be making:
http://siliconrepublic.blogspot.com.au/2011/02/arduino-based-pc-ambient-lighting.html

It says I need a 12V DC supply for powering the breadboard. When searching up for 12V DC supplies, I only get power supply's that plug into the wrong wall socket (I live in Australia).
Do I need to get something like the article suggests:
http://www.amazon.com/Garmin-AC-Veh...1KZ6/ref=sr_1_2?ie=UTF8&qid=1297231222&sr=8-2

Or can I get something such as this:
http://www.ebay.com.au/itm/DC-12V-1...?pt=AU_Laptop_Accessories&hash=item336678ae52
If the first option is the only possibility, how do I get the plug to go into my wall socket?
Also, how do I get the other end plugged into the breadboard when the product just has a single plug on the end?
 

Answer:What type of power adapter do I need?

You can use the Ebay adaptor, the easiest way to get 2 wires is to get a socket that fits the plug, like this one :- http://www.ebay.com.au/itm/5-5-x-2-...05?pt=LH_DefaultDomain_15&hash=item4167b5b34d and solder 2 wires to that socket.

The circuit at your link uses a 2 wire plug into the breadboard, you would have to get a similar plug OR you could push bare wires into the breadboard.

OR you could cut the plug off to reveal the 2 wires but they will probably be quite thin and may not connect well if pushed into the breadboard holes.
 

1 more replies
Relevance 47.56%

What adapters can I use to connect my laptop to wired internet connection? I'm using windows 10. Thank you!

More replies
Relevance 47.56%

What adapters can I use to connect my laptop to wired internet connection? I'm using windows 10. Thank you!

More replies
Relevance 47.56%

I want to use my existing ps2 keyboard with a kvm switch that has usb input. I bought what I thought was correct a usb/ps2 adapter but when I plug it in the keyboard will not work. What is the correct gismo that I need?thanks as always.sanap

Answer:NEED THE CORRECT TYPE KEYBOARD PS2 TO USB ADAPTER/

You can get these at Computer Fairs Maplins may have them bottom of this page click here

3 more replies
Relevance 47.56%

how do i find this out so that i can get one that is compatible with directX9.0c?
 

Answer:how do i find out what type of graphics adapter i have?

look here
 

1 more replies
Relevance 47.56%

Hi all.

I have a computer of which I don't know what kind of power adapter it requires or rather the name of the adapter that goes in. A dell laptop charger fits in but this doesn't suffice to power it. If I know the type that goes in I should be able to buy the new adapter.

Thanks in advance!
 

Answer:Not sure of type of power adapter for computer

11 more replies
Relevance 47.56%

Hi there forum,

I just bagged an Lcd monitor for nowt but have no power supply for it.
The rear panel says 12V 3.0A DC power supply, but I can't find any of this type, I've tried Maplin, play.com etc and all they suggest is 300mA, now I thought 3.0 A was 3000mA?

Do I need to go back to electronic school basics?
Thanks
 

More replies
Relevance 47.56%

Before I go out and buy this adapter. I need to kow if I will be able to get both Audio and Vidio all in this one adapter by plugging it into my surround sound receivers HDMI input/output?
 
Mod Comment: Corrected subject line, for more accurate search capability.













Solved!

Go to Solution.

Answer:yoga 900... USB Type-C to HDMI Adapter

Hello and welcome,
 
If you mean HDMI, I realized I hadn't ever checked if the sound works.  Just plugged it into my Samsung TV.  Got a movie playing now and sound works fine.
 
This is the adapter I'm using.  There are others but this one is working for me.
 
http://www.amazon.com/gp/product/B00X4S5C7G?psc=1&redirect=true&ref_=oh_aui_search_detailpage
 
Z.

9 more replies
Relevance 47.56%

I'm having trouble finding an adapter for my X1 Carbon M.2 SSD.  The laptop is fried, but I'm hoping to get some of the files out of the SSD.  The model number is Intel SSDSCMMW240A3L and I've found that it's a "B Key" 6 pin connector, but it seems like around the pins is different (less space alloted between the 6 and the next 20 pins).  So standard M.2 adapters won't work Is anyone aware of any type of external adapters that I can plug this unit into?  They can be Sata, USB, PCIE, doesn't matter. Thanks

Answer:Adapter for X1 Carbon (Type 3444-CUU) M.2 SSD

Hello and welcome,
 
Something like this?  I have no experience with this.  Just found via The Google
 
https://www.amazon.com/Adapter-Sandisk-SD5SG2-Lenovo-Ultrabook/dp/B00PRL9V5M
 
Z.

5 more replies
Relevance 47.15%

My laptop have usb type-c port.  I wanna use this port for connection to lan, hdmi and power at same time, via special dock and power adapter.   So i need a HP recomended devices for  this, please help me find it.I try macbook pro 2016 power adapter, but it didnt charge my laptop. 

More replies
Relevance 47.15%

I have fully upgraded windows 10 and all the latest drivers from Acer support pages installed to my Aspire S5-371.When I'm trying to connect a display into type-c USB-port using a type-c/HDMI adapter, windows shows an error message "Display connection is limited" and by clicking it, it opens following web site: https://msdn.microsoft.com/en-us/library/mt628692(v=vs.85).aspx#_5 I tried 2 different type-c/HDMI adapters with same results. Does my new laptop support dual display at all?

Answer:S5-371 dual display issue with type-c adapter

The end of the M$ note says "The hardware and software on the system, the device or adapter, or cable does not support the DisplayPort /DockPort or MHL alternate modes." Now since a regular USB port works (2.0 even) for DisplayPort that leaves MHL. Maybe you need one of these.

1 more replies
Relevance 47.15%

Is there a way for a Windows 10 firewall rule to determine what network adapter is in use? Can it differentiate between Wi-Fi, TAP, Ethernet, etc.?
Poking around Windows Firewall for the first time, I don't see any settings related to network adapter, but I wonder if the "local IP address" settings could be useful. Would the different adapters show up as different local IP addresses, in some way that is consistent enough to make a rule out of it?

More replies
Relevance 47.15%

My laptop have usb type-c port.  I wanna use this port for connection to lan, hdmi and power at same time, via special dock and power adapter.   So i need a HP recomended devices for  this, please help me find it.I try macbook pro 2016 power adapter, but it didnt charge my laptop. 

Answer:USB type-c power adapter and dock for HP Envy 15

it has a lot of thm but you can check this one http://store.hp.com/us/en/pdp/accessories-88342--1/kensington-usb-30-docking-station-with-dual-dvi-h...

1 more replies
Relevance 47.15%

Need to know which battery plug in adapter works for Real Tec Radio Model RTL8188EE.Its a HP laptop. Missing the plug in.

More replies
Relevance 47.15%

Is there a way for a Windows 10 firewall rule to determine what network adapter is in use? Can it differentiate between Wi-Fi, TAP, Ethernet, etc.?
Poking around Windows Firewall for the first time, I don't see any settings related to network adapter, but I wonder if the "local IP address" settings could be useful. Would the different adapters show up as different local IP addresses, in some way that is consistent enough to make a rule out of it?

More replies
Relevance 47.15%

I have fully upgraded windows 10 and all the latest drivers from Acer support pages installed to my Aspire S5-371.When I'm trying to connect a display into type-c USB-port using a type-c/HDMI adapter, windows shows an error message "Display connection is limited" and by clicking it, it opens following web site: https://msdn.microsoft.com/en-us/library/mt628692(v=vs.85).aspx#_5 I tried 2 different type-c/HDMI adapters with same results. Does my new laptop support dual display at all?

More replies
Relevance 47.15%

I have a Yoga Pro 3 I purchased here in the US a couple of months ago.  This summer I'll be moving to Moldova (eastern Europe) with the Peace Corps and plan to take my Yoga with me. Moldova has 220-240V Type C power outlets.  Ideally, I'd like to purchase a power adapter for my Yoga that is already configured with a Type C plug.  The US Lenovo customer service staff can't seem to tell me if I can buy one. I know Germany also uses Type C but I don't see the option to buy the 40W power adapter on their site. The below adapter is available on the UK site but I'm not sure UK adapters are compatible with Type C outlets:http://shop.lenovo.com/SEUILibrary/controller/e/gbweb/LenovoPortal/en_GB/catalog.workflow:item.detai... Does anyone out there who travels to Europe or owns a Yoga Pro 3 in Europe have any tips on buying a native adapter?  If I need to use a convertor I will... I'm just trying to cut down on the accessories I have to carry with me.

More replies
Relevance 47.15%

Hello! I've been around here for a sometimes but never registered as a users because I find all the solution I needed, but I have one follow problems that I can't solve and I need sevenforum's help!

I recently bought Sapphire Radeon HD 6770 and comparing game performance with my old graphic card Nvidia 9800 GT, I don't see much of a difference. According to my friend who builds computer, he said it's suppose to be superior differences between those 2 graphic cards. I also tried to sign up for BETA profile for Blizzard game series and apparently it kept detecting the Radeon HD 4200, which is my integrated card. Anyways, my question is, how can I change my Adapter Type? I posted a picture of it so you guys can see what's my problem is. I have the latest Catalyst Control Panel from the sites sticky thread .

I don't know how to check my computer stuff, so here's my computer on website: HP - Pavilion Desktop / AMD Athlon™ II Processor / 4GB Memory / 750GB Hard Drive - p6654y

My english is my second language so if you can't understand what I said I'll be glad to explain again lol. Rough draft xD.

I've already tried Driver Sweeper, failed on me .

I don't know what BIOS means either lol.

If my integrated graphic card is disabled for good, I think I might get to see my 6770's full performance. Also tried overclocking, didn't helped at all :[. I still think it's my integrated card's problem, but hey I could be wrong. I'm terrible at computers .

Thanks.
-youki412

Answer:Changing a video card adapter type help.

Assuming HP didn't hide the option in the bios (and I wouldn't put it past them), have a good look around likely in the Advanced section under Chipset. If it is don't disable it quite yet, first boot back to Windows and uninstall the AMD driver through Programs and Features using the Catalyst Install Manager. Then restart and go into the bios and disable, and re-install the AMD driver using the latest,

Latest AMD Catalyst Video Driver for Windows 7

unless that is the one you already have.

P.S. What you're seeing shouldn't happen, but with the way HP likes to hide/disable/monkey around in general with bios settings I'm not really surprised that it did. When it works properly (the AMD onboard video with an AMD video card) you can actually use both at the same time for running up to 4 (or 5 depending on video card) monitors at a time.

2 more replies
Relevance 46.74%

The Spectre x2 12 detachable is capable of charging through the two Type-C USB ports. The HP Type-C USB adapter charges using these two ports. However, no third party Type-C USB chargers (even with Power Delivery specifications) will charge this device. Meaning, there is no benefit to charging via Type-C since this device can only use the HP adapter charger. Another HP device that charges via Type-C USB, the Spectre 13.3 (HP Spectre 13-v151nr), received a BIOS update (F.26 Rev.A; sp77130.exe) in August that allows charging through third party Type C-USB chargers like Google and Apple chargers (see below in yellow;"- Expands support for the USB Type-C adaptor."). I am requesting a similar Type-C charging adapter BIOS update for the HP Spectre x2 - 12-a008nr, to remove the limitation described above. Not allowing to be charged through Type C chargers manufactured by Google and Apple is absurd. If you would please,  use the Power Delivery specifications that these reputable vendors use, and that you also used for the 13.3, and allow this device to truly be fantastic. Thank you! Below is the notes from the BIOS update for the 13.3:Fixes - Fixes an issue where certain keys generate the incorrect character when the keyboard on the system is used.- Fixes an issue where certain keys do not generate a character when the keyboard on the system is used.- Expands support for the USB Type-C adaptor.- Provides enhanced BIOS password security.- Provides enhance... Read more

More replies
Relevance 46.74%

Hi all, I happen to have a spare power adapter from my former W530. Can I use it with my X1 Carbon 20A7? Connector is the same but of course the W530 one is much more powerful, so I guess the question is: is the X1 protected against more Amperes than expected? Thanks and regards

More replies
Relevance 46.74%

My Dell XPS 13 has recently been unable to recognize my AC adapter. I've tried several outlets and chargers, but to no avail. Once I plug the charger into the laptop, the charging light on my Dell lights up for a second but turns off immediately after.
I am unable to get past the Dell SupportAssist and it seems to be an endless loop that won't allow me into my desktop. 
Would I be able to bypass the "AC Adapter Unknown" error by using Google's Pixel 2 charger? It would allow me to charge through Dell's USB-C port instead. Has anyone tried this method or has solved the issue in any other way?
Thanks for any help at all! 

More replies
Relevance 46.33%

Hi, It's been a couple of weeks since I bought my Thinkpad E570 (Product SKU 20H5CTO1WW). Since I live in Greece and the laptop is on its way to me (I had it delivered to a friend of mine in UK), I'd like to know what kind of ac adapter the laptop is equipped with. If it's universal (110/220V) then I suppose an adaptor from type G to type F plug would suffice, otherwise I will probably need a new ac adapter. So, can anyone help me with my question? I forgot to ask my friend about it, I just realized about the different power plugs today. Regards,Vas













Solved!

Go to Solution.

Answer:Thinkpad E570 ac adapter type (bought from Lenovo e-shop)

Welcome to the forum.
 
> If it's universal (110/220V) then I suppose an adaptor from type G to type F plug would suffice
 
ThinkPad AC chargers are designed to work with input voltages from 110VAC to 240VAC so the charger that's shipped with your E570 will be just fine. If your new E570 was bought in the UK then yes, you'll need a G to F adapter to fit local power outlets.

2 more replies
Relevance 46.33%

Hi everyone,  I have bought a Lenovo T570 and a VGA to USB Type-C converter to had an external display on it. The problem is when I lock the computer I need to manually unplug and plug the converter to turn on the external display. Have you an isue like this and do you know how to avoid this ? Thank.

More replies
Relevance 46.33%

Normally when you insert a pccard into the slot you should feel a slight resistance at the end. After that the ejection pin pops out. also a card should fit in there completely. Now if i test a working pccard (32 bits gold connector) in this r500, it can not fit it in there completely. Also there is no resistance or connection. It will slide in loosely and does not connect. The last centimeter of the card will not fit in the adapter. No new device is found. I tested this in linux as well in windows7. I conclude the physical connection  between the card and the adapter is not there. So perhaps this is a hardware flaw ? Or perhaps i am missing something obvious.if i look closely into the slot, i can see there is a metal pin at the left side deep inside the slot, wich blocks access to the connection pins. It prevents my cards from beeing inserted completely. * I wonder if anyone has found this same problem.* also has anyone found a normal userguide for his laptop ? (r500 2714) i can only find the Hardware maintenance and safetey manuals. Thanks for your responses. 













Solved!

Go to Solution.

Answer:r500 2714 pcmcia/cardbus type i/ii adapter does not work.

Aha, the metal pin blocking access is released when the grey releasebutton is in the 'ejected' state. Now i can fit the pccard type in there. (32 bit pcmcia) These have a gold plated connector on the card and has the word pccard on it.the old style 16 bit cards dont seem to fit. Maybe this info will help other users. Still i would like to see a r500 usermanual in wich i cold have read this * Does anyone know where to find the usermanual ? regards  

1 more replies
Relevance 45.92%

Iv recently encountered the dreaded Plugged-In not charging Error
Upon Boot
ALERT! AC power wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. 
Iv come to the conclusion its the module that determines the adapter and wattage type.
As iv tested it with known working chargers and batteries.
Can anyone *** me with this knowledge or allow me to get a schematic for the mother board?

More replies
Relevance 45.92%

I have an XPS 12 9250 with an external Dell Adapter USB Type C to HDMI/VGA/Ethernet/USB 470-ABQN.  This adapter is working for Ethernet and VGA, but the USB port is not working.  I suspect that I need the correct drivers installed.  When I plug in my windows phone or my android phone, both devices show that they are charging, but windows 10 does not indicate that it sees the devices.  If I plug in an external keyboard to the adapter's USB port, windows 10 does not react, and the keyboard lights do not come on (keyboard works fine on 2 other computers).
So, I'm pretty sure I've installed all the latest drivers that are listed on support.dell.com for the xps 12 9250, but it's hard to tell as there seem to be scores of them.
Is anyone else having this problem?  Can anyone tell me which specific drivers I need to get USB working?  Thank you

More replies
Relevance 45.1%

Hello, I have a laptop yoga720-15IKB80X7. When I transfer a display to a computer screen (type-c to hdmi) I get a disappointing view (the adapter intel 630 are user) How do I change the video output settings and use the (nivida 1050 card) or just get a good view on the screen of computer/tv? Thanks for the help

More replies
Relevance 45.1%

In the week or two I have updated to Windows 10 from 8.1. The surface Pro 3 has been automatically doing updates. 2 days ago the type cover stopped working and disappeared from devices. Today the wifi does not work and says "The Marvell AVISTAR Wire4less-AC Network Controller is not fixed. Experiencing driver or hardware related problems." Also in device manager "The network adapter is experiencing problems. Failed". The Bluetooth has also disappeared. Can you offer some advice on how to resolve this please. Also when I can get wifi and can restore my devices, should I go back to windows 8.1? Thanks.
Maria

Answer:My Surface Pro 3 has lost hardware/device for wifi adapter, bluetooth and type cover.

Originally Posted by Windows Central Question In the week or two I have updated to Windows 10 from 8.1. The surface Pro 3 has been automatically doing updates. 2 days ago the type cover stopped working and disappeared from devices. Today the wifi does not work and says "The Marvell AVISTAR Wire4less-AC Network Controller is not fixed. Experiencing driver or hardware related problems." Also in device manager "The network adapter is experiencing problems. Failed". The Bluetooth has also disappeared. Can you offer some advice on how to resolve this please. Also when I can get wifi and can restore my devices, should I go back to windows 8.1? Thanks.
Maria go to device manager and disable the wifi and bluetooth adaptors and then enable them and see if that helps
Check this article for more info: https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/cant-connect-to-a-wireless-network?os=windows-10
You can go back to windows 8.1 only if you do it before a month is over since you upgraded
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

more replies
Relevance 45.1%

After running Windows updates, the Intel HD Graphics adapter has an error which takes out the use of multiple screens either through the HDMI out or USB 2.0.  I have tried disabling and re-enabling the adapter, uninstalling and re-installing the driver.  Searched on Intel and Lenovo sites for a driver that will work with no luck.  The only thing I have found to work so far is restoring to before the updates were ran - which only last so long until the updates run again. Anyone have any ideas?

More replies
Relevance 45.1%

Hi,im having a very frustrating issue with the built-in wirless network adapter. after starting up everything works ok and the wireless connection connects to my local wireless network.once every few hours it suddenly shows an error on the connection icon in the  right bottom corner (local area connection only, unable to connect to the internet ) nothing i do from that point solves the problem: i tried the following:1. disable and enable the wireless adpater from vista or the Thinkvantage software.2. turn Off\On the wireless switch infront.3. disconnect and reconnect to another network.4. restart wirless related services. the only thing i can do is restart the computer to fix the issue. im thinking it might be some kind of a hardware failure.but there is no other indication or related symptom of when this happens.could it be related to a fan issue i have been having lately ? Please help ThanksBoaz   

More replies
Relevance 44.69%

Our software requires a service user to have certain rights in the Local Security Policy. One of them of course being "Log on as a service".

Today I got a call saying our software wasnt working at one of our customer's locations. Error message was a logon failure. After verifying credentials werent changed I checked the LSP and sure enough our user was taken out of the several objects it needed to be in.

Tried looking through the event viewer. If its in there I probably missed it. Not entirely sure what I'm looking for in there. Google was no help.

Thanks.
 

Answer:How can I determined who did this...

Is there a GPO resetting your other GPOs? Or affecting services in general?
 

2 more replies
Relevance 44.28%

a got a person on the web ((hacker)) trying to spy on my data and damage it.he knows in case of contacting my computer with internet that I am contacted with it , while I am contacting my computer I got messages that my device data will be destroyed,now I have turned off my computer and stopped contacting it with internet ,I will show my case on Virus & Other Malware Removal but where I need to know now how can he knows my computer to be mine is there a hard part or something can I remove from my device to stop knowing the device is for me.
something like serial number for a specific part can be shown by a specific program in case of contacting with internet.
will be suitable in case of being cheap.
thank you.
 

More replies
Relevance 44.28%

I have this first PC with XP Pro in this room.My second PC (XP Pro) is next door and connected to my Theatre Projectors system. I have both linked with an Edimax box and cards in both PC's.This allows me to receive emails and get on the web and have Freeview in the Theatre.I have thousands of photographs on my first PC and want to get them onto the other PC. I'm adding to my photo stocks regularly.Question, without wires and more hardware, can I share files from here to there using this Edimax Wireless Lan.Many thanks dear readers.

Answer:I'm 77 but determined to have a network.

Is it "wired" together at the moment and are you sharing broad band internet connection?Is this your router click here+(108Mbps)/+Edimax+54Mbps+Wireless+ADSL2++Modem?productId=24341?

5 more replies
Relevance 44.28%

Just a question on, i suppose you would call it "networking theory"

How is throughput determined? For example, my connection to my router is 100meg up and down, but my router's connection to the internet is only 1.5/.5 meg. How does the router control the rate of transmission from my machine to match (or at least approximate), that of it's speed? Even simpler, how does a connection know that it has reached a saturation point somewhere along the link between sender and reciever? Is it a hardware level (along the level of MACs) or something higher, such as TCP that handles this?
 

More replies
Relevance 44.28%

I recently moved to NYC and have subscribed to Time Warner for the internet service.
Today using a new laptop to login my Facebook account, I got a email from Facebook saying
Operating System: Windows 7
Browser: Firefox
Location: Herndon, VA, US (IP=xxxx:xxxx:xxxx:xxx:xxx:xxxx:xxxx:xxxx)
 
OS and Brower are correct. Even the IP is correct (Google's find_your_IP_address shows the same address). But why is it "located" in VA?
 
And if I use another site to find out my IP (e.g. http://whatismyipaddress.com/), it shows a "different" IP (all numbers, whereas Facebook and Google detect an alphanumeric IP). The IP shown by whatismyipaddress is located in NYC.
 
Hopefully I am just being paranoid, but why would Faceook/Google detect an IP that is in VA ?? Am I being hacked? And why would another IP detection website locate my IP to be in NY ??
 
Any insight will be appreciated. Thank you.

Answer:How is IP address determined ?

Time Warner has buildings all over the planet. The main office is in New York City,
 
http://en.wikipedia.org/wiki/Time_Warner
 
and one of their offices is in Herndon, VA
 
https://www.google.com/?gws_rd=ssl#q=Time+Warner+herndon%2C+va

1 more replies
Relevance 43.87%

Hi i am sorry if this is in the wrong place, but i have a big issue with windows 10 determed to install - to the point i have this window thats telling me its ready to u pdate - i am not sure i can even reestart the pc withoput it starting all i have ever done is reserve a copy in CASE i wanted to upgrade

HELP

Answer:Windows 10 determined to install

Get the GWX Control Panel: Ultimate Outsider - Software Downloads

It will remove those unwanted files and prevent W10 from installing.

4 more replies
Relevance 43.87%

hello friends my pc specs are intel g33 chipset , dual core processor 2.7 ghz 2 gb ram , i know that g33 chipset support only shader model 2.0 but when i used gpu z it shows shader model 3.0

Answer:how to determined shader model of my pc

you could try using PCWizard:
CPUID - System & hardware benchmark, monitoring, reporting

you can download it for free..
it will examine your rig and report hardware details in full..

3 more replies
Relevance 43.87%

How is entropy and bits determined?

if my password has 10 characters, then:
95 ^ 10 - 59,873,693,923,837,894,000 [with symbols]
62 ^ 10 - 839,299,365,868,340,200 [lower&upper case+numbers]
26 ^ 10 - 141,167,095,653,376 [lower/upper case only]
10 ^ 10 - 10,000,000,000 [numbers]

Thus, even a 5 character pw is secure as the size of the pool of characters is very large.

How does 2^128(bits) relate to this? 2 of what? 2 bits, 1 or 0?

AMT pin has 4 digits. That is only 10^4 = 10000

<t3 Q%f#8S
Entropy: 48.3 bits
close to
G5riCf8A3s
Entropy: 45.7 bits

DRSVNBJXLR
Entropy: 41 bits

better and less to type than

41264795296359061794
Length: 20
Entropy: 36.8 bits

but finally:
y~g1 bTehQ xPr4j1>)p9Z%u}
Length: 25
Strength: Very Strong
Entropy: 130.4 bits
Charset Size: 93 characters


http://lastbit.com/pswcalc.asp
pw length: 8
Speed: 10m/sec
# comps: 10
Full ASCII
up to 28 months [2.3years].

Cool. Thus proving an 8 character pw is more than secure against anyone not hooking up 1000 PCs.
 

More replies
Relevance 43.87%

Hello.

First of all, thanks to everyone who helps out on this forum. I'll forwarn you that these logs will not be pretty.

Rootkit has been persistent for 2 weeks. Infected my old laptop to the point where I finally agreed to have my boyfriend buy me a new one as an early bday present. My router transmitted the rootkit to my new laptop. : ( (there's no other explanation - no flash drives/externals/etc).

I am a freelance writer and this is now seriously impacting my job. Sounds dumb, but. I wiped using Kill Disk. Reformatted. Took to a repair shop where the guy didn't believe me apparently, he wiped the disk and reformatted and assured me it was gone. It wasn't.

It adapts. Gmer/Combofix/Runhooker all catch it. Everything else - Malwarebytes & all the big AV's - don't. Bit Defender caught one trojan in an online scan.

I've investigated this stupid thing for long enough to learn a few things. A, it actually boots from "\device\multi(0)disk(0)rdisk(0)partition(1)\windows". Guessing that's a virtual drive which is why nothing detects it.

Another interesting fact - the cmd.exe prompt, located in the windows\system32 folder, actually routes to a WinNT (that's part of the trojan, the hidden WinNt logins) command line. When I type in "bootcfg /?" it specifically lists commands, one of which references whistler. Heh. (It has the WinNt command strings vs the XP command strings I get in recovery console.... Read more

Answer:Determined Whistler Bootkit Won't Die

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

2 more replies
Relevance 43.87%

Hi All,
Install of Tivoli client fails with error 1607: Unable to install InstallShield

Tried to Install ISScript1050 -> Error - The windows Installer Service could not be accessed. This error can occur if you are running windows in safe mode or if the windows Installer is not correctly installed. Contact support personnel for assistance.

A look at the detail log shows: Failed to connect to server Error: 0x80070005 Main Engine Thread is returning 1601

Ran wmidebug and it says that the problem is not with wmi but with a security setting.

Any ideas?

Thanks,
Jim
 

More replies
Relevance 43.87%

Hey everyone. My computer has recently become pretty infected after lending it to a friend. Spybot and AVG took care of what they could but I then realized that I might not be the best person to tackle this, so I came here. If someone could help it would be hugely appreciated. Here is the DDS.


DDS (Version 1.1.0) - NTFSx86
Run by Lori at 15:38:06.54 on Mon 01/05/2009
Internet Explorer: 6.0.2900.2180
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.447.166 [GMT -8:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\brsvc01a.exe
C:\WINDOWS\system32\brss01a.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe -k imgsvc
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\VTTimer.exe
C:\WINDOWS\system32\VTtrayp.exe
C:\Program Files\Analog Devices\SoundMAX\Smax4.exe
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\WINDOWS\System32\svchost.exe -k HTTPFilter
C:\Program Files\Internet Explorer\iexplore.exe
C:\PROGRA~1\AVG\AVG8\aAvgApi.exe
C:\Documents and Settings\L... Read more

Answer:Various determined problems/infections

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

While Spybot's TeaTimer is an excellent tool for the prevention of spyware, it can sometimes prevent tools from fixing certain things.
Please disable TeaTimer for now until you are clean. TeaTimer can be re-activated once your HijackThis log is clean.Open Spybot Search & Destroy.
In the Mode menu click "Advanced mode" if not already selected.
Choose "Yes" at the Warning prompt.
Expand the "Tools" menu.
Click "Resident".
Uncheck the "Resident "TeaTimer" (Protection of overall system settings) active." box.
If TeaTimer gives you a warning that changes were made, click the "Allow Change" box when prompted.
In the File menu click "Exit" to exit Spybot Search & Destroy.
------------------------------------------------------

Download ResetTeaTimerand Save it to your Desktop.
Double-click ResetTeaTimer.zip
Double-click ResetTeaTimer.bat and click Run to remove all entries set by TeaTimer.
A DOS window will open and close again, this is nor... Read more

2 more replies
Relevance 43.87%

I've got one on the bench now that was loaded with crap that I pretty much have taken care of EXCEPT... Altnet.exe. Spybot finds it but cannot remove it because it's in memory. I allow it to run on the next boot, it finds it again but still can't get rid of it. SO,... then I try booting up in safe mode hoping it won't find it's way into memory but, of course, it does. I also ran SuperAntiSpyware and it still remains. When I do reboot, I get this cryptic message that a registry key or something had to be recovered and the recovery was successful. I'm sure that means "you tried to get rid of me but here I am...". Anyone out there have any sure-fire methods of getting rid of this pest? Thanks!
rtg
 

Answer:ALTnet: a determined little bugger...

6 more replies
Relevance 43.46%

There seems to be almost no correlation to performance - 5 bars could be a 100+ Mbps connection, or it could be < 5 Mbps... On the other hand, 4, 3, 2, and 1 bars all mean that the connection is going to be flaky and unstable

Answer:How are the wifi connectivity bars determined?

I may be wrong but I think the bars are for the signal strength and not the speed of the connection.

Jim

4 more replies
Relevance 43.46%

Does anyone know how MS determines the status of an update? I have a patch deployment appliance which uses Lumension to analyze patches, but there is a disconnect between what they see and what MS sees. Windows updates has patches such as KB2533552 or KB2868116 that show up as Important updates, but Lumension says they are just recommended. I assume that it is because there are no bulletins posted for those patches (search for them here Microsoft Security Bulletins ? Updates & News), but I don't know if that is true. Does anyone know about this?

Answer:How is criticality of Windows updates determined?

Note that there is a difference between Security ratings and non-security ratings.

Note the following articles apply to the two patches above..
Updates are available that improve the content in warning messages that you receive when you run local executable files in Windows
An update that prevents a "0xC0000034" error message when you try to install Windows 7 SP1, Windows Server 2008 R2 SP1, or Windows Embedded Standard 7 SP1 is available

Neither are Security patches

I suspect that Lumension may be applying their own system, and perhaps downgrading based on their own evaluation.
The KB2533552 patch is one which really only applies to RTM - any machine produced since SP1 released would have had that installed already. It's really only application in limited circumstances, but MS pushed it out to everyone to reduce further support problems.
The KB286116 is really only a cosmetic thing - but it can make troubleshooting a lot easier.

3 more replies
Relevance 43.46%

I have a copy of a Windows 7 setup disk here. Is there a way to determine whether it is 32-bit or 64-bit by examining some of the files on the setup disk?

If so, how?
 

Answer:Solved: 32-bit - 64-bot - can it be determined by looking at files on the Setup DVD

11 more replies
Relevance 43.46%

I need a little help on accessing the... 'User detemined problems' area. Under the 'Value data' column there are lots of 'null' entries.Are these useless registar entries ? and should I tick their boxes for RegScrub to delete ?

Answer:RegScrub XP....'User Determined Problems'

As far as I know they are unused registry keys. I have never had any problem with RegScrub XP, and always select all keys and let the program delete them. A restore point is automatically created in any case.

4 more replies
Relevance 43.46%

Hi,

I have tried this many times and I am missing something so need help, scenario is: A 80486 comp, can't get to the specs of the mobo, comps runs good, installed Win95 on it, runs fine on my LAN with its ISA NIC, have plenty of older ISA modem, Zooltrix FM9628, Cardinal 3250 56k for exemple, no jumpers. I usually find their drivers, install them, then will get the message there is no modem detected. I use Modem from Control Panel to install the modem, direct Windows to the driver files, it will install the modem, then when I try to do the diag test, the modem is not responding, the modem usually installs on Com2, I am not sure how to tell it to go on an other com port if that would solve something.

I am usually told to forget about that has ISA modem, Win95, 80486 are a horrific combinaison. It might be true, but I somehow don't beleive it can't be done. I am not genned in on the ins and out what is preventing me from getting that handled.

Any help would be really cool.

Cheers!

Answer:Stubbornly determined to install this ISA modem

I had the same problem with a lucent winmodem in a laptop. Is the modem itself okay? Have you checked to see if there are conflicts? You can go into Bios and see whtehr it tells you which port the modem SHOULD be on but that might not be the right one. Check what the IRQ is and see if that tallys with what you're getting in device manager for the modem after you install it.

I never did solve the lucent--I just bought a pcmcia card modem and done--it did the job.

6 more replies
Relevance 43.46%

I understand some of the power options pretty well when I'm logged in and at my own desktop: Screen, disk activity times, sleep mode, etc. I know how to change them. But what determines which of these options are in use when logged out and at the login screen?
Is it the set of options that were in place for the last person who logged out? Or...???
Thank you.

Answer:When logged OUT, how are power options determined?

The last set of options selected when a user was logged in are used when no one is logged in (remember, power settings are per machine, not per user - if a user sets power options, those are the options per machine until changed).

1 more replies
Relevance 43.46%

Hi there,

My site has been attacked constantly in my shared server 1and1 and despite me cleaning the scripts from some files in the server, strong passwording all my accounts (including email ones) and spending all day yesterday hunting the cause (online antivirus scanners, running full scans from Malwarebytes, Microsoft Security Essentials and System Protect from Advanced System Optimizer), I keep getting the following message from Malwarebytes: Successfully blocked access to a potentially malicious website: 93.125.99.4 (it?s a russian IP and it varies a bit, of course) type: outgoing, port:49690 (this also varies) and process: iexplore.exe or firefox.exe (depending on what browser I use). I run Windows 7 Ultimate x64, so GMER log came blank.

Please, DO help me find the problem inside my computer, PLEASE!!!!!

.
DDS (Ver_2011-06-23.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421
Run by Clarita Maia at 10:43:51 on 2011-06-25
Microsoft Windows 7 Ultimate 6.1.7601.1.1252.55.1033.18.4096.2111 [GMT -3:00]
.
AV: Microsoft Security Essentials *Enabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
SP: Microsoft Security Essentials *Enabled/Updated* {ABEC4DA7-E46C-2F39-81B5-AA334E5D1BDD}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k ... Read more

Answer:HELP! Outgoing threat not determined by Malwarebyte┤s

I am sorry but I unknowngly posted in other forum for the same problem. I got an answer yesterday (http://forums.malwarebytes.org/index.php?showtopic=88055&st=0&p=446409&fromsearch=1&#entry446409)...so I guess this disqualifies me from your help, which I most looked forward to. He has not answered my answer to his post since yesterday....if I get no answers from him at Malwarebytes forum, may I count on you? Thank you so much for your great and generous work and again I´m very sorry for not having thought well before posting at different forums. And of course this is a necessary bump.

2 more replies
Relevance 43.46%

I was looking at some graphic cards and I came across these.

My card:

Chipset:GeForce 6600 GT
Memory: 128MB
DX Version:9.0c
Core Speed:500MHz
Memory Speed:1000MHz
Bus Width: 128bit
Pixel Pipelines/TMU:8x1

And here's the other:

Chipset:GeForce 6800GT
Memory: 256MB
DX Version:9.0c
Core Speed:350MHz
Memory Speed:1000MHz
Bus Width:256bit
Pixel Pipelines/TMU:16x1

Now just by looking at the 6800GT with its memory, bus width, and pipelines, it's obviously a better card. But I noticed that the 6600GT has a faster Core speed. Is that better than the 6800GTs? And could you help explain a little to me? Thanks.
 

Answer:How GREAT graphic cards are determined..

The 6600's core is a simpler chip so can run at a higher clock speed, the 6800 is still faster, the 6600 would have to run at 700MHz to equal it.
 

1 more replies
Relevance 42.64%

So I have been using iTunes for years (hate it with a passion though). Few weeks back this laptop had a bad case of malware/viruses. Eventually got rid of all that, now the laptop refuses to allow any method of fixing my iPod problem. Which goes a little like this...

The iPod won't show in My Computer...until I disconnect it and then the iPod symbol appears as a drive for about a second. I have tried every method on the Apple website, but it always leads to a dead end because when I get a screen with a progress bar updating driver etc, the progress bar just goes on forever, until I unplug the ipod! Then obviously the device disappears from Device Manager so I can't change the bloody driver!

The iPod appears as a USB mass storage device, and also sometimes as a Portable Device.

It's not an issue with iTunes, it's definitely a Vista driver/file issue somewhere.

Any ideas? I'll happily supply an extra info.

What is infuruiating is how the iPod appears in device manager but won't let me change the Microsoft driver to an Apple one (as this would certainly fix the issue).

I think the problem is changing the iPod from a USB Mass Storage Device to what it actually is, an Apple Ipod.

Thanks
 

Answer:Argh! Laptop is determined to not work with my ipod!

nickyboy29 said:


Few weeks back this laptop had a bad case of malware/viruses. Eventually got rid of all that, now the laptop refuses to allow any method of fixing my iPod problem.
Click to expand...

This part of your comments says a lot.

If the infection was that bad, it's probably damaged the operating system.

You might want to consider a repair or reinstall of Vista.

--------------------------------------------------------
 

3 more replies
Relevance 42.64%

I recently installed win 8 on new clean 1Tb hdd but forgot to firstly disconnect the second 250Gb hdd disk #0, so the OS ended up on disk #1. I then disconnected the 250Gb drive and reinstalled Win 8 on the 1Tb drive. I then checked Disk Management and found, as I thought, that the 1Tb drive was now disk #0.
However, when I reconnected the 250Gb drive and then checked Disk Management again I found that the 1Tb drive had reverted to disk #1 and the 250Gb to disk #0. I would prefer that my 1Tb C:\ drive be disk #0. Could I achieve this by swapping the SATA connections on the HDDs or on the motherboard?
Help appreciated.
Pedro

Answer:Is HDD disk# determined by mobo sata socket?

Hello Pedro,

Yes, that would be correct. Whatever the SATA port number the disk is connected to will be the disk #.

5 more replies
Relevance 42.64%

When I use Google Map on my Yoga 2 Pro and click on show my location, it says "Your location could not be determined"  Do I need to set something up to use the show my location on Google maps?  Does the Yoga 2 Pro have that capability?Ron

Answer:The Yoga 2 Pro using Google maps - "Your location could not be determined"

Go to Control Panel, Location settings.If both check boxes are checked then unchek them, press Apply, and then check them and press Apply.Open Google Maps again and press My location icon. It should work.

2 more replies
Relevance 42.23%

After thinking about it I noticed a burning smell the night I used it and then next morning just a white screen. I am fairly techy...can I repair myself? Any help please ? Thanks!













Solved!

Go to Solution.

Answer:C710-2847 has white screen. Google determined it t...

Hi.. Since you have noticed a burning smell it coulf be an hardwrae issue.If the Chromebook boots to white screen with Chrome logo, you may follow the steps in this weblink to fix the issueChromebook Whitescreen

2 more replies
Relevance 42.23%

Hi. Running Win 7 Professional 32bit machine. I have up-to-date versions of IE10, Firefox and Chrome.

If I go to HTML5 Demo: geolocation using Firefox and Chrome and confirm that I want to share my location, both browsers successfully show the map.

IE10, however, fails. The failure is immediate. This also occurs on my colleague's machine too running a Win 7 Professional 64bit machine. It's not only on this site either. I only noticed it wasn't working because I'm coding a Javascript geolocation service and, while checking cross-browser compatibility, it failed on that too. The error is "current position could not be determined'.

I've checked the IE options, taken it in and out of protected mode, and ensured that "Never allow websites to request your physical location" is unchecked, but it still won't work. There don't appear to be any issues raised anywhere else on the internet, so I'm assuming this is an isolated incident, which makes it more of a problem I suppose. Is there something I'm missing?

cheers, and TIA.

Answer:IE10 geolocation fails: current position could not be determined

I get a popup on the bottom of ie asking stating the site want to track.... I personally closed the popup and exited the site,
But did you get a prompt ?
Attachment 284529
Seems the most straight forward thing to try is reset or possibly use No add-ons mode,
No Add-ons mode/ Click the Start button and type in the search box,
Internet explorer
Click on the suggestion or it’s located at,
Start/ All programs/ Accessories folder/ System tools folder/ No add-ons.
http://www.sevenforums.com/tutorials/1222-internet-explorer-reset.html
Check the box to Delete personal settings.
Post what Security suite you have installed and also the other computer.

8 more replies
Relevance 42.23%

Anyone out there who can tell me what to do to prevent Event Log errors reading as follows:
They all start with the same:

Microsoft-Windows-CodeIntegrity Code Integrity determined that a process (\Device\HarddiskVolume2\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorsvw.exe) attempted to load \Device\HarddiskVolume2\Windows\assembly\GAC\

then followed with:

.....\GAC\Microsoft.StdFormat\7.0.3300.0__b03f5f7f11d50a3a\Microsoft.stdformat.dll that did not meet the 8 signing level requirements.

.....\GAC\ADODB\7.0.3300.0__b03f5f7f11d50a3a\adodb.dll that did not meet the 8 signing level requirements.

.....\GAC\MSDATASRC\7.0.3300.0__b03f5f7f11d50a3a\msdatasrc.dll that did not meet the 8 signing level requirements.

.....\GAC\Microsoft.StdFormat\7.0.3300.0__b03f5f7f11d50a3a\Microsoft.stdformat.dll that did not meet the 8 signing level requirements.

.....\GAC\ADODB\7.0.3300.0__b03f5f7f11d50a3a\adodb.dll that did not meet the 8 signing level requirements.

.....\GAC\MSDATASRC\7.0.3300.0__b03f5f7f11d50a3a\msdatasrc.dll that did not meet the 8 signing level requirements.

.....\GAC\stdole\7.0.3300.0__b03f5f7f11d50a3a\stdole.dll that did not meet the 8 signing level requirements.

All are Event-ID 3033

==

Thanks
-
Windows 10 x64
=
Attachment 31018

=

More replies
Relevance 42.23%

I got the notification that my upgrade was available from windows 7 Home Prem. I followed the instructions and did a normal upgrade, not a clean install. All my personal files are still on the PC as are my bookmarks etc.

Windows 10 is working fine, but says it's not activated. It shows the last 5 digits of the product key info, and they are different from my previous windows 7 key, so somehow they have automatically changed. My windows 7 key obviously doesn't work to activate 10 either.

I get an error code Error code: 0xC004C003 - The activation server determined the specific product key has been blocked??

At no point in the upgrade did I change or enter any product keys. I just followed the on screen instructions.

What should I do now? I can roll back to 7 but when I upgrade again I assume the same thing will happen?

Answer:Activation server determined specific product key has been blocked?

I rolled back to 7, checked everything was fine it was definitely activated, and all updates installed. I then followed the upgrade procedures again, but am having the same error with trying to activating. This is very frustrating.

10 more replies
Relevance 42.23%

Looking for usb or serial external PCMCIA type ll slot.

Now what im tring to do, is...

I currently use my cell phone with a data cable to connect to any computer as a modem. then i can dial out using a special service from alltel called Acess mobile link (slightly higher speeds than regular dialup and this eliminates the middle man and i have unlimited data download) Anyways... they also offer a PC card for type ll slots (common on laptops not on PCs) witch is setup to basicaly do the same thing that my cellphone is doing only i can not find any thing that would allow me to use the card with out having a type ll slot. ANYTHING would be nice. like a "usb adapter" would be nice, or even an "external type ll slot".

Any ideas besides "buying a laptop" would be nice
 

Answer:"Wireless PC card" adapter? USB or External type ll slot or ANYTHING

Not sure if I am understanding your right or not....

But would something like THIS do the trick?

It'll give you a type II PCMCIA slot in the back of your computer.
 

3 more replies
Relevance 41.82%

Greetings, So I got the BSOD. Initially thought my hdd died. Purchased a new hdd, still no luck. Determined that the bridge connecting the hdd to the motherboard is loose, presumably from holding the laptop with only 1 hand on the right side of the mouse pad. Now trying to determine my cheapest option. 1 suggestion was to boot off of a external hard drive, but then I loose the portability or make it far more cumbersome.  Another suggestion was to replace the motherboard. Does anyone know if the motherboard in a 15.1inch is the same size and the motherboard in my 14.1inch? Any help/suggestions would be greatly appreciated. Regards, Ryan

Answer:t43 2687-d3u bsod determined to be short in bridge connecting hdd to mobo now what?

or you can use the ultrabay as your main hdd compartment, with a ultrabay slim hdd adapter.

1 more replies
Relevance 41.41%

A short while back, for no real reason I'm aware of (I don't think ANYTHING has changed in my system setup -- certainly I can't think of anything in any way harddrive or partition related unless it was the removal of Acronis tools, but I would swear this issue occurred well after that...) Windows XP on my minimal computer suddenly decided to see and mount partitions it's supposed to ignore. I have a Linux EXT4 partition as well as a swap partition, and while Windows normally utterly ignores such partitions, it has all of a sudden randomly decided to assign drive letters to them. I've also just recently added a hidden FAT32 partition where I keep some data for various live linux distros and Windows is assigning a letter to it as well. I think I remember that Windows is supposed to show hidden partitions with NT versions now, but it won't let me change anything. Neither the Linux partitions, nor the hidden FAT32 partition can be adjusted in any way in the "Computer Management" section of the Administrative Tools. (I was hoping to just remove the mount point entirely. I don't want it assigning drive letters to these partitions in the first place.) It's odd that it won't even let me change the one for the hidden FAT32 partition though even though it at least knows the filesystem well enough that I can see the files and everything. Interestingly enough, it manages to offer the option to change the drive letter for my Windows p... Read more

More replies
Relevance 41.41%

Hi all,

the other day I switched off the XP restore function after seeing my total drive capacity was out my 2gb. I went into Computer Management > Disk Management and found there was a partition 'unknown health partition'. I downloaded PartitionMagic to merge that partition with the main partition and everything seemed to have worked fine. Now trying to open PartitonMagic again, I get the following error, Init failed: Error 117, Partition's drive letter cannot be determined.
An error also pops up if I attempt to defragment the drive, 'Drive C might be corrupted, run chkdsk /f'. I've done that, no problems found, but I still keep getting the error. Any ideas how to fix this thing?

Thanks
 

Answer:PartitionMagic-Init failed: Error 117, Partition's drive letter cannot be determined

From here (archived) http://www.reference.com/browse/Symantec+norton+partition+magic&




Compatibility issues
PartitionMagic is compatible with Windows NT, 98, ME, 2000, and XP desktop editions. However, it is not compatible with Windows NT, 2000, or .NET server editions. It crashes if a Windows Vista partition is present, even if it is run from a different operating system, with the error "Init failed: Error 117. Partition's drive letter cannot be identified". However this error can be avoided if the Windows Vista partition is configured using Windows XP instead of creating the partition using Windows Vista or its installation disk. To fix this, all partitions on the hard drive need to be deleted and formatted into new partitions using the Windows XP installation disk, allowing for a working partition for Windows Vista to be created. The same error occurs in some conditions under WindowsClick to expand...

Normally it's best to use the bootup option (Dos) to access PM, sometimes within Windows it cannot find the drive letter correctly
 

16 more replies
Relevance 38.13%


Hello All,

We are facing issue in domain machines as group policy is not updating. after rejoin the domain it's working perfectly.

Below are the event IDs : 7320, 7007, 7326, 1017, 7016

local administrator is able to update group policy properly but non of domain user able to update grou policy properly.

below is the error.


Component Status
Component Name
Status
Last Process Time
Group Policy Infrastructure Success 8/20/2015 1:58:15 PM
Folder Redirection Pending 8/20/2015 1:58:05 PM
Folder Redirection did not complete policy processing because the user needs to log on again for the settings to be applied. Group Policy will attempt to apply the settings at the user's next logon.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 8/20/2015 1:58:04 PM and 8/20/2015 1:58:05 PM.



Thanks, dashrath Chate 9763107923

More replies
Relevance 37.72%

How do reset the manchine type.    After a  R40e F11 rebuild, Machine type has changed to TP-1S____  .I need to reset to the type 2684-KRG where do I do that?  

More replies
Relevance 37.72%

I haven't figured out how to get rid of it.. i don't see anything I set in ease of access.  it's making like s a squish sound every few letter i type.  it doesn't do it like for every letter.  it's not when i touch the mouse pad either.  please give me some ideas on how this happened..??

Answer:Inspiron. I don't know what settings I screw up on but when i type I hear like a squishing sound on every so many letters i type.

Always include your model name and number as well as the operating system when posting a question. Also include a clearer explanation of the problem.

3 more replies