Computer Support Forum

ERROR MESSAGES: ""hpqthb08.exe-strong name Validation Failed..."

Question: ERROR MESSAGES: ""hpqthb08.exe-strong name Validation Failed..."

I am receiving these 2 error messages (see below). Message #1 pops up first and then is followed by Message #2

Message #1:

"hpqthb08.exe-strong name Validation Failed which says, (Strong name validation failed for assembly C:\Program Files\HP\digital imaging\bin\hpqthb08.exe The file may have been tampered with or it was partially signed but not fully signed with correct private key )"

Followed by Message #2:

hpqth08.exe Common Language runtime Debugging Services. Click OK to Terminate or Cancel to Debug

HELP!

Relevance 100%
Preferred Solution: ERROR MESSAGES: ""hpqthb08.exe-strong name Validation Failed..."

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: ERROR MESSAGES: ""hpqthb08.exe-strong name Validation Failed..."

Closing duplicate to: http://forums.techguy.org/windows-nt-2000-xp/545998-error-messages-hpqthb08-exe-strong.html

1 more replies
Relevance 170.81%

I am receiving these 2 error messages (see below). Message #1 pops up first and then is followed by Message #2

Message #1:

"hpqthb08.exe-strong name Validation Failed which says, (Strong name validation failed for assembly C:\Program Files\HP\digital imaging\bin\hpqthb08.exe The file may have been tampered with or it was partially signed but not fully signed with correct private key )"

Followed by Message #2:

hpqth08.exe Common Language runtime Debugging Services. Click OK to Terminate or Cancel to Debug

HELP!
 

More replies
Relevance 106.14%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Relevance 103.53%

I am cleaning up a friend's Dell computer, but I've run into an annoying problem that manifests as Windows loads up. These are the error messages I get, in this particular order:

I've tried hitting either OK or Cancel, and it doesn't really help. If I hit Cancel, another error window pops up that looks like this:

Also, I get the same original error message for other files in the same directory, I think when those files are accessed by the operating system, such as:

So I assumed this had something to do with the "Dell Support" software that all Dell machines come with. I tried to uninstall it, but I get the same errors, which prevent the uninstaller from finishing. Any ideas?

Thanks,
*arjun
 

Answer:"Strong name validation" error -- Help!

you could just reformat it and not put any dell crap back on. this is why I don't like dell: they incorporate themselves into your PC as much as Microsoft does. its really annoying.
 

7 more replies
Relevance 92.22%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Relevance 90.48%

Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to input the name and password. This works fine on the intranet.

The problem is ... Read more

More replies
Relevance 90.48%

Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to input the name and password. This works fine on the intranet.

The problem is ... Read more

Answer:"401 Unauthorized" and "Protected Object" Error Messages

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/networking/865180-401-authorization-protected-object-error.html
 

1 more replies
Relevance 90.48%

"401 Authorization" and "Protected Object" Error Messages
Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to... Read more

Answer:"401 Unauthorized" and "Protected Object" Error Messages

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/networking/865180-401-authorization-protected-object-error.html
 

1 more replies
Relevance 88.16%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

Answer:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Relevance 86.13%

Mods, if you feel that this thread is more of a "Windows" issue, please feel free to move this thread.

Here last year I did my second build because I was having "boot" issues. Wasn't certain what exactly the problem was at the time. But something some how screwed up the boot sequence in my system, and where everything was pretty much "outdated." I just went ahead and did another build.

Though, since then I've been pondering around with the thought of using a SATA to IDE adapter so that I can retrieve what ever salvageable data I can from one of the two HDD's that was in my last build. So I finally broke down and ordered a couple different one's earlier this week.

Unfortunately, I've been running in to some problem(s) when I try to launch with the IDE in place.

Upon initial launching, the boot sequence seem to take some time longer than it normally does with out the IDE HDD in place. Though after a 15-20sec lapse I'll get an error screen displaying an windows error code of "0xc000000e" with a prompt message below stating "The boot selection failed because a required device is inaccessible"

I searched all over online to see what that error code represents, only to get "pages after pages" of sites with each site telling me something different.

I have no intentions of using this as a third HDD in my system. I just want to retrieve select data from it.
 

Answer:Error code "0xc000000e" "The boot selection failed because a required device.........

16 more replies
Relevance 86.13%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 85.26%

I know there are a handful of threads with the above error message and code, but I have yet to see a thread with what was my reason for the error code. I wanted to pass on what I discovered and how I fixed it.

I started with a standard Windows 7 Pro install joined to a domain. This machine has restricted Internet access so I downloaded the ISO on another machine, burned it to media and ran the upgrade on the test machine from within Windows. The machine passed all of the checks and tests and reported no issues. It would get to the first "Installing" screen, display 0% and then almost immediately give me the pop-up "Something Happened: Install Failed"

I ran it as administrator, I did a Clean Boot, I uninstalled all of the AV/Malware/security type stuff. Nothing worked. I finally found the setuperr.log in C:\$Windows.~BT\Sources\Panther. Found several error lines and the code was always 80070005. I found a line where the installer had a problem copying install.esd. I cleared out the $Windows.~BT in case there was file corruption in the directory somewhere and tried again - no change. Finally, I decided to create a USB install media and viola! The install completed. And I used the same ISO to make the USB that I had used to make the DVD.

I've read a few other threads where people had problems with the ISO. So the moral of the story is if you need to use install media, use the USB installer.

More replies
Relevance 84.97%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 84.1%

MS thinks that one of my PCs is running W7 that's not genuine. It is genuine - at least I bought it from Amazon and paid ?141 for it so that - to me - means it's genuine. It may not be but neither Amazon nor MS will take any responsibility for it not being genuine so I've given up with them both. I think that the issue arises because of hardware changes I've made. Oh - yes, I've lost the box with the key on it too.

Long story short. I use this PC very little and when I first first got the black screen and messages after I installed a larger hard drive and reinstated the drive image from an Acronis backup. I stupidly forgot to reinstate the drive signature. Then it happened again when I changed the ITX motherboard.

Now here's the real question. Every now and then it gives me the "black screen" treatment. I fix it by restoring a drive image and turning off W7 updates.
If the damned thing is told not to call home then it shouldn't should it? What's going on? It seems to give me a month or two and then goes psycho on me like HAL9000!

Answer:How do I stop W7 "calling home" and displaying "not genuine" messages?

If this is an OEM version then I can understand why it's doing this after you changed motherboards, since it is forever tied to the first one it is installed on.

If you can follow these instructions for activation issues,

Windows Genuine and Activation Issue Posting Instructions

The results of that can help resolve your issue.

Filling in your system specs will help as well,

System Info - See Your System Specs

If your installation is valid then there's no reason to turn off updates or try to keep it from calling home.

6 more replies
Relevance 83.81%

I have two issues, which I think are related. In the Device Manager, it shows under USB Controllers "Unknown device". "Windows has stopped this device because it has reported problems. (Code 43)"

I tried updating the driver, but the driver was correct.

I tried disabling the device.

I uninstalled the device. Windows reinstalled it at next boot, but the problem reappeared.

There is no Imaging Devices in the Device Manager.

At the same time, my webcam failed to open. Message "Webcamera initialization failed."

I downloaded the correct webcam program from Toshiba, installed it, but same result.

This all started when I uninstalled and reinstalled Skype. I have tried uninstalling it again, but still no webcam.

The webcam is enabled in the BIOS.

I really do not want to reinstall Windows.

All help appreciated.

Toshiba Satellite P500 16J
Windows 7 Ultimate x86
All updates installed

More replies
Relevance 82.94%

Can you please tell me the steps for removing the following messages-
they appear when the computer starts.
"c/windows/inf/other.exe" "c/windows/system32/config/win.exe"

Note: I have followed some steps to check if there is virus, this is ok, no problem with virus.
I just don't want to see this message appearing! It irritates me! Help!!!

Thanks a lot!

More replies
Relevance 82.94%

I have a home network of five computers where one acts as a common computer ("server") where most data from the other four computers is stored (music, pictures, word processing, movies, etc). All five are running XP Pro SP2.

The "server" had two 80GB hard drives, but SMART was indicating that one was failing, so I replaced it with a 200GB drive. Now, every computer in the house can access the 80GB drive and all of its files but none of the computers in the house (except the "server") can access the new hard drive. I have the file sharing set to full access, and I can view the file folders that are on the drive from the networked computers, they are all listed. But when I click on a folder, I get "Access is Denied." When I mouse over a folder, it reads, "Folder is Empty"

But the folder isn't empty though when accessed from the local computer, only when trying to access it over the network.

I have turned off the Windows Firewall, turned it on again, off again, etc, no change. I have Zone Alarm on all the computers, turned it off, still no change.

Any ideas??? I have over 500 CDs on that harddrive, and I want to listen to music from my other comuters! I'm going nuts here.
 

Answer:"Access Denied", "Folder Empty" messages

There are two ways that might work.

1. From a computer other than the server right-click "My Computer" and choose "Map Network Drive". Where is says "Folder" type "\\<ip address>\C$" if you want to share the C partition of that drive (don't type the quotes).
2.
Go to My Computer and and click on the Tools Menu and then Folder Options.

Click the view tab.
Scroll all the way down until you see "Use simple file sharing (Recommended)" and uncheck it.
Click OK.

Now right-click the drive you want to share and choose "Sharing and Security".
Click the security tab.
Click "add" and add "Everyone".
Give "Everyone" the rights you want them to have "Read only" or whatever you want.
 

2 more replies
Relevance 82.94%

I am in desperate need of help! First, I normally do back up, but my back up drive and recovery disks were stolen about 2 weeks ago while we were moving and I had not bought a new backup since.

System is configured as:
Lenovo T520
mSata (primary drive)
SSD for 2nd and 3rd drive.

I have many pieces of software some very complicated to reinstall (and many of the original disks were stolen like Chief Architect and some of my 3d cad software) , and have many accounts (I run several businesses) for email so I DON'T want to "clean" install.

I DO still have all of my data, so that is at least not too bad.

History is that yesterday, I lost access to my networks, and could not reconnect to get internet connections. I tried powering down and the computer was taking over 5 minutes (no messages about updating)
So I powered down with the power button.

After that, I tried to re-power the computer and I got a message "preparing to automatically repair" and then it went into Diagnosing this PC.

I have tried to go to a previous restore point to no avail (goes through all of the steps, but after finishing, says it was not able to and that the process made no changes.
I have tried rebooting using the Advanced Options and was given me the choice of sever things and tried Safeboot (I could boot to Safe Mode with command, but no other options worked)

I tried booting off of my first SSD, as this was on old boot drive, but it did not boot, said "inaccessible boot&q... Read more

More replies
Relevance 81.2%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

Answer:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Relevance 80.91%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

Answer:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Relevance 80.91%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 80.91%

I down loaded the NBC Direct Player 3 or 4 weeks ago and then uninstalled it due to it's lack of workability. No I get a box that pops up about every 3 or 4 minutes that says "DirectPlayerCore.exe" Validation Error. Any body know what I can do to get this to stop?

Answer:Need help with "DirectPlayerCore.exe" Validation Error

Go to "Start"
Click "RUN"
Type in the field "msconfig"
Popup will open
Go to "Startup Tab"

Find ANYTHING related to NBC Direct Player, "Uncheck the box" Save, and reboot computer.

This should fix it.

1 more replies
Relevance 80.62%

These illegal operation messages just started popping up:
"ATTNENGN" caused an invalid page fault in module MSVCRT.DLL at 0167:780018ee.
"WEB" caused a general protection fault in model WEB.EXE at 0001:0000bb4c.
I haven't installed anything or downloaded and everything seems to be operating OK. But these messages are appearing for a reason and I would like to fix the problem. Thanks.
 

More replies
Relevance 80.33%

I cannot open User Accounts in Control Panel, I keep getting ...

Microsoft (R) HTML Application host has encountered a problem and needs to close.

Anyone with a fix? . My appreciations in advance!
 

Answer:"User Accounts" in Control panel wont Open-Error is "Html application Host Error"

Do you have a recovery restore install disc or partition?
You can try doing a repair or system file check...
Scan For Missing/Corrupt System Files...

Windows XP comes with a wonderful tool called System File Checker (SFC)
Itscans and verifies the versions of all protected system files after you restart your computer...
To Do This:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following command:
SFC /scannow
And then click OK
You must be logged on as a member of the Administrators group to run SFC..
You will need your Windows XP CD during this procedure if SFC needs to get an original file. Please remember that Windows XP can have multiple instances of a .DLL file and remember which version is for which program.
Notes....
I have been asked if it is possible to have a "progress meter" show when SFC runs... This is the registry hack you need. PLEASE do not go messing with your registry if you do NOT know what you are doing!
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: SFCShowProgress
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)
 

1 more replies
Relevance 80.33%

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

Answer:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies
Relevance 80.33%

I have actually been getting this error for the past month, at least since March 29th. I've made several attempts to work around it but to no avail. It appears that there is an error with the other browsers as well. I have searched for solutions for this for several weeks, none of which fit my problem. I uninstalled my clamwin antivirus in favor of Windows Security Essentials, though, most people have fixed this problem by messing with AVG? I don't think I have AVG on my computer?

Anyway, if someone knows how to solve this problem please let me know, I'm willing to try anything.

Answer:"Failed-Virus scan failed" error when making downloads on chrome

Let's see what Anti-virus is installed ....

Download CKScanner from here http://downloads.malwareremoval.com/CKScanner.exe
Save it to your desktop. <=== IMPORTANT
Doubleclick CKScanner.exe and click Search For Files.
After a very short time, when the cursor hourglass disappears, click "Save List To File".
A message box will verify that the file is saved.
Double-click the CKFiles.txt icon on your desktop and copy/paste the contents in your next reply.

9 more replies
Relevance 80.04%

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

More replies
Relevance 80.04%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 80.04%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

Answer:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Relevance 79.46%

Hi there,
Can someone please help to shed some light on this, or possibly fix this issue?
I've been trying for ages to get my parents computer to download and install updates.
It's running 7 Home Premium 64 bit with SP1.
The Windows Update page shows that Windows could not search for updates, which resulted in the error 8007370B
The link on that page to get help for this error has no results.
The system update readiness tool failed to fix the issue
sfc /scannow in an elevated command prompt results in the error message
Windows resource protection could not perform the requested operation.
I also tried to force WSUS offline updates, but ended up having to remove the temp admin account and cancel the updates when that failed.

log files attached:
Attachment 362134

Answer:Failed updates "WindowsUpdate_8007370B" "WindowsUpdate_dt000"

Your first run of CheckSUR found a fair number of errors, and managed to fix them, mostly - but to remain until now...

Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 _isdel.exe wow64_microsoft-windows-i..llshield-wow64-main_31bf3856ad364e35_6.1.7600.16385_none_ca61f601a4548b8e
(f) CSI Corrupt Identity 0xC0150017 c64c420f5864b56f41d74a09d3a4941a, Culture=neutral, Version=6.1.7601.18283, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versyo~Scope=NonSxS c64c420f586..a09d3a4941a_31bf3856ad364e35_6>1.7601.18283_b5294749e54eed83 Bad identity

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

9 more replies
Relevance 79.46%

Fix for "Tuner Not Found" error and "Receiver service has stopped working" error listed in next post! -- Errors I'm receiving: "Tuner Not Found""Windows Media Center Receiver Service has stopped working.""Welcome - An upgrade is currently in progress."SpecsIntel P4 3GHz2GB RAMVisionTek Radeon X1300Hauppauge WinTV PVR-150 PCI IIWindows 7 32bit1. Tuner Not FoundOkay, the entire install went without a hitch. On opening Media Center I was told that I needed to setup Live TV. When I click the link I was given the dreaded "The TV signal cannot be configured because no tuner hardware was detected." If I run WinTV from Hauppauge I can view TV just fine.MCE ran fine this morning on Vista SP1 before the install.For the tuner issue I have done the following:-Reseated the card-Updated the drivers-Uninstalled the hardware and rescanned/installed the hardware and drivers-All Windows Updates-Uninstalled all references to Hauppauge on the machine and installed JUST the drivers, no Hauppauge software-Adjusted Log On preferences for Windows Media Center services to Local and manually started ehrecvr and ehsched along with cmd line manual starts-Downloaded new codecs from WinDVD and MSFT-Run the WMC Decoder Checkup Utility from MSFT and changed to Miscrosoft DTV-DVD Video Decoder (the utility recommended I change to this -- only one that is MCE compatible -- but once I did it told me that it is incompatible with sync on WMP10 and that... Read more

Answer:*RESOLVED* Media Center "Tuner Not Found" error, "Receiver service has stopped"

Okay, I resolved the first two issues, Tuner error and ehrecvr error.It had to do with multiple Admin user accounts on my computer. My computer was originally set up with a user Robert Baker with full privileges as administrator. I then also set up a MediaCenter account with full privilidges. For whatever reason the MediaCenter account has access to EVERY action on the computer except starting the ehrecvr service.1.  First set Media Center Service Launcher to log on at NT Authority    Services > Right-Click Windows Media Center Service Launcher > Properties > Log On tab > Log On As 'This account: ' > Type " NT AUTHORITY/LocalService " > Click Apply > General tab > Start service.2. I then set the Media Center Scheduler Service AND Media Center Receiver Service to log on as my other admin account. Same as above but with other account credentials and started the services.3. Reboot and no ehrecvr errors. Since this was a good sign I tried WMC and was able to set up my TV fine.I STILL, however, get the "Upgrade in progress" message when I open Media Center. Anyone know how to fix that? I've run setup again and can't get rid of it.

19 more replies
Relevance 79.17%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 79.17%

MODS MOVE THIS TO THE RIGHT SECTION IF ITS IN THE WRONG?..thanks!

help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird....

i have no clue on what to do.. im stuck at a screen that says this





?..? said:



"Server Infomation"
"Select the type of incoming server you are using"
"[_??_] POP [_??_] IMAP"

"Enter the name of your incoming server (for example, "mail.example.net")."

"Incoming Server: [___????????????????___]"
______________________________________________________________________

"Uncheck this checkbox to store mail for this account in its own directory. that will make this account appear as a top-level acount."

"[_??_] Use Global Inbox (Store mail in Local Folders}"

"Enter the name of your outgoing server (SMTP)(for example, "smtp.example.net")."

"outgoing Server: [___????????????????___]"Click to expand...


 

Answer:help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird...

afaik hotmail does not provide pop\imap or smtp for free you may get it if you pay for the hotmail service but i would not recommend you do that just so you can get pop\imap or smtp

hrrm tbird and hotmail from the thunderbird faq
Can I access my Netscape WebMail or Hotmail accounts through Thunderbird?

No. Netscape WebMail and Hotmail use proprietary protocols. To access WebMail directly through an e-mail client requires you to use Netscape 6+ with AIM; to do so with Hotmail requires either Microsoft Outlook or Outlook Express. Of course, you can access your WebMail account on the Web at http://webmail.netscape.com/, or Hotmail at http://www.hotmail.com/.
 

8 more replies
Relevance 79.17%

I'm running Windows 7 on a DELL XPS. Before this happened a disk scan was running and I reset the computer before it was finished. It restarted the first time, but by the time I got back to the computer it was on the "Strike f1 to retry boot" screen.I've tried turning on CAPS LOCK, NUM LOCK & SCROLL LOCK and hitting ALT - E,F,B, but that did not seem to work. I don't know if I did the combination work or something, but I tried a variety of combos and none of them seemed to work. I also tried reloading the default settings in the Boot options menu and that did not seem to help either. I've read resetting the BIOS is a possible solution, but I'm not sure what the next step is at this point.Any help would be greatly appreciated.* UPDATE: I just ran a diagnostics test and it said Error Code 0141 - No Drive Detected

Answer:Getting "Strike f1 to retry boot" "Error Code 0141 - No Drive Detected"

Its having issues detecting the hard drive. What is the exact make/model number of this computer?Curious as to why you didnt allow it to finish properly? Did it take forever getting hung at a certain point of the scandisk in which you told it to reboot because it was not progressing further? I have a strong feeling you will need to replace the hard drive. The system sensed an issue with the drive before it died and it attempted a scandisk to try to repair, and right now it sounds like the issue with the drive got worse from the point in which the system detected a scandisk was necessary to correct for errors.

14 more replies
Relevance 79.17%

I've been having some problems with my computer and I've always somehow managed to work my way around the issues spyware/malware etc. have created but lately it's been getting out of hand.. Some time ago I got a virus or something that made the entire tab under "Processes" dissapear. So I could not see process-names in the task-manager. I have re-installed XP but this problem persists. I have been using a different application to monitor and handle processes.

The problem now is the constant pop-ups generated from this fake anti-virus program calling itself "Anti Virus Pro 2007" or something.. It pops up with fake commercials, and even attach itself into other explorer-windows while I view other pages.

As popups and messageboxes keep popping up, I close them, but after a while windows will open a messagebox telling me "Buffer overrun detected in e:\Windows\system32\explorer.exe" (or \\windows\explorer.exe I don't remember really but you get the idea) and explorer.exe will be terminated, sometimes taking some internet explorer windows along with it, other times explorer.exe just starts up again and all my windows remain.

I used to have Norton but was forced to remove it as it was sucking up all my CPU. It rendered my computer useless, as I mainly use it for gaming.

I've also experienced having the connection between me and my modem broken while beeing on the internet, and I don't know if my computer actually is offline or if -I'm- just... Read more

Answer:Infected - "Win Anti Spyware" "Buffer overrun error" and a fake dialer or something++

Hello and welcome to TSF

Please download ComboFix

Note: It is important that it is saved directly to your desktop.

Close all browsers. Double click combofix.exe & follow the prompts.
When finished, it will produce a log for you. Post that log in your next reply.
Note: Do not mouseclick combofix's window while it's running. That may cause it to stall.

You are using an older version of HijackThis. Please do the following to download and install the latest version of HijackThis v2.0.2:

CLICK HERE to download the HijackThis Installer:Save HJTInstall.exe to your desktop.
Double-click on HJTInstall.exe to run the program.
By default it will install to C:\Program Files\Trend Micro\HijackThis.
Accept the license agreement by clicking the "I Accept" button.
Click on the "Do a system scan and save a log file" button. It will scan and then ask you to save the log.
Click "Save log" to save the log file and then the log will open in Notepad.
Click on "Edit -> Select All" then click on "Edit -> Copy" to copy the entire contents of the log.
Come back here to this thread and paste the log in your next reply.
Do NOT have HijackThis fix anything yet! Most of what it finds will be harmless or even required.

You may delete the older version once you have successfully downloaded and installed the latest version of HijackThis v2.0.2.

Expected logs:

Combofix.txt
HijackThis log

19 more replies
Relevance 79.17%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

Answer:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Relevance 78.88%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

Answer:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Relevance 78.59%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

Answer:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Relevance 78.59%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

Answer:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Relevance 78.59%

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

More replies
Relevance 78.59%

I have an IBM thinkpad (a friend of mine) that I'm trying to see what's wrong with it.  Whenever you start it up, it runs through the diagnostic tests and eventually provides the message listed in my subject.  I attempted to press f12 during one of the reboots since i saw something on here from someone else that had luck but didn't really see anything i felt comfortable about changing.  After i exited, it began rebooting and displayed the error "No operating system found".  I then turned the power off and began receiving the same message as i originally got "a disk read error occurred".  Before i received the computer, my friend was told the hard drive was shot and there was no hope in retrieving any files.  Is this true?  Any help would be greatly appreciated. Thank you,Frank

Answer:"A disk read error occurred" "Press Ctrl+Alt+Del to restart"

Quote from: Katman_09 on October 29, 2010, 05:04:19 PM...Before i received the computer, my friend was told the hard drive was shot and there was no hope in retrieving any files.  Is this true?....Your description seems to indicate this is true.

2 more replies
Relevance 78.59%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Relevance 78.59%

Hey guys, I'm having a bit of trouble with the board. I'm using Firefox 1.0.4 and I'm seeing just regular text instead of these buttons. I'm sure I probably fudged something in Firefox, but I can't figure out how to fix it.

Any ideas? Thanks!
 

Answer:Strange error using forum buttons ("Go to first new post", "View first unread", etc.)

get myie2
 

8 more replies
Relevance 78.59%

While using "Windows Explorer" as an FTP client I have put the system into a state where any attempts to access an FTP folder from "Windows Explorer" produces the following dialog:
Dialog Title: "FTP Folder Error"
Dialog Icon: Information Icon
Dialog Text: "Windows cannot access this folder.  Make sure you typed the file name correctly and that you have permission to access the folder.  Details: No more Internet handles can be allocated"
Dialog Buttons: OK
I had used the "Add a network location" feature of "Windows Explorer" to add an FTP site.  The FTP folder appears under "Computer" in the left panel of "Windows Explorer." 
It is not mapped to a drive letter.  I then initiated a large FTP transfer operation by using drag-and-drop from the FTP folder to a local folder.  A portion of the transfer completed as expected but after some time it produced the "No more Internet
handles can be allocated" error.  When OK was clicked the transfer was terminated.  In this case I am using large to refer to many thousands of files and directories to be transferred as opposed to a small count of files having many bytes.
After the initial error dialog is cleared with the OK button and the transfer is terminated I can then reliably reproduce the dialog.  Any attempt to open an FTP network location
from "Windows Explorer" will produce a n... Read more

More replies
Relevance 78.59%

Anyone tried deleting a registry key in Windows 7?  Got "access denied" or "Error while deleting key"?
The usual response is, "You need to run regedit as an administrator".  but I *AM* logged in as Administrator, and running regedit as administrator, trying to assign administrator full permissions on that registry key in order to delete it!!  
Am I mistaken, or isn't Administrator supposed to be able to administer and control all the settings on the computer, in order to set it up for the "Average Joe" user?
So, under the permissions menu of that key, go to advanced, change the owner from System to Administrator, and try again.  It's no longer saying "access denied", but "Cannot delete xxxxxx. Error while deleting key".

The scenario: Basically, the wireless has stopped working on a laptop. The device does not show up in Device Manager, but is in the registry, so the normal procedure is to delete the registry entry for the device in HKLM/System/CurrentControlSet (and /ControlSet001) /Enum/PCI    ,then attach the device or restart the computer, it finds the "new" hardware and reinstalls it. Easy!...

Not with permission restrictions on the administrator account it's not!  So I need to give myself permission, to give myself permission, to do a simple task like delete a single registry key!  Why, Microsoft, why???!!!  Please just make the Administrator accoun... Read more

More replies
Relevance 78.59%

I have upgraded 5 machines and clean installed 3 machines.

Experienced an issue with one machine with continuous corruption problems

After the 3rd attempt I discovered that even with a Clean Install of Win 10 I get unrepairable errors - Sorry I don't have screen captures of the "exact" wording:

(Just to be clear, I have not installed ANYTHING ELSE, other than Windows 10 and the corruption is unrepairable immediately)

Heres what I did to find the issue;

Open CMD in Administrator (type cmd in Cortana search bar, RIGHT CLICK and select "Run as Administrator")

After using command:

sfc /scannow

Windows reports errors which cannot be repaired

Running the following command should repair the issue:

DISM /Online /Cleanup-Image /RestoreHealth

BUT DOESN'T - You get this message:

Deployment Image Servicing and Management tool
Version: 10.xxxxxxxxx
Image Version: 10.xxxxxxxxx
[==========================100.0%==========================]
Error: xxxxxxxxx
The source files could not be downloaded. Use the "source" option to specify the location of the files that are required to restore the feature.

For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

I have tried a few different options, including mounting the ISO and directing the DISM command to look directly on the mounted drive

Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:D:\sources\install.wim:1 /limitaccess
(where "D" i... Read more

More replies
Relevance 78.59%

I only get the BSOD when playing games, not any specific game, but any, sometime i can go a whole week of playing games and have no BSOD at all, and somedays 5 minutes after a game is running it will BSOD everytime, all day long. When I try to Run any game like GW2 Or Inquisition my pc turns into Bluescreen with an error CRITICAL_PROCESS_DIED or KERNEL_DATA_INPAGE_ERROR ..I've already Updated all my drivers and reinstalled all my games, also run chkdsk /f and memtest with no problems.


This is the screen:

Also this is my dump config:
(note that i have windows 8.1, not 7)

Still it doesn't create any File or Folder and when the BSOD happens the blue screen say that its collecting info but it doesn't get off 0% .
It's the same with the critical process died it just goes to the blue screen saying its collecting info but it also doesn't get off 0%.

I'm completely baffled with what to do as the blue screen view hasn't picked up anything and i cant find the dump files.
 

Answer:"Critical Process Died" & "Kernel Data Inpage Error"

Hi BTW, welcome to the TSG Forums....

You may find this from the MS Community helpful. If Greek is easier to understand than this article then come back to this Forum and someone will help you.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/windows-81-bsod-kernel-data-inpage-error-and/b67ae41a-9228-4462-9c53-d1f5d115f784

T.
 

1 more replies
Relevance 78.3%

Hi;
Had a sudden inability to go much further than a third or forth-level download on ANY given webpage and then PC would seize-up, requiring "cont+alt+del" in order to get freed-up. Thought perhaps I picked-up a bug of some sort during a recent google search, and went immediately to Panda and Trendmicro to perform both virus as well as malware scans. While the Panda scan was loading-up, I received the following error message....

... " DoPatch....dll reports error....Error "C:\WINNT\patch.utp"....unreadable or not a patch file..."

Was able to complete both scans. Nothing found other than tracking cookies.

I then did a file serch for the above and located it. It was installed TODAY apparently, and not by me, within minutes of the problem starting.

I'm guessing someone/thing slipped this patch into my WINNT file or modified it while I was doing the google search, so I have included a HJT scan below.

Hope this all makes sense and ties-out to something. Any help would be genuinely appreciated-
thanks
Webz

__________________HIJACK SCAN BELOW__________________________
Logfile of HijackThis v1.99.1
Scan saved at 12:42:23 PM, on 5/11/2005
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE
C:\WINNT\syste... Read more

Answer:"DoPatch" error message - "dll reports error" causing pc to seize-up (HJT attached)

Bump for HJT expert
 

1 more replies
Relevance 78.3%

im not sure why windows vista is doing this error how can i fix it The application error "0x7c919af2"referenced memory ae"0x00000010" the memory could not be written'

there shouldnt be any reason it has happening on several applications from games to ie fire fox has done it as well if u can help i would be ever so gratefull
 

Answer:vista The application error "0x7c919af2"referenced memory ae"0x00000010" error

Hi, let us have some Pc specifications.
Check and post
TSG System Information Utility - found here.
http://static.techguy.org/download/SysInfo.exe
======
Download Security Check by screen317 from.
http://screen317.spywareinfoforum.org/
Or
http://www.bleepingcomputer.com/download/securitycheck/

Save it to your Desktop.
Double click the install icon.
If using Vista or Win 7 - right click the icon - run as Administrator
A command Prompt window will open.
Let it scan the Pc - press any key when asked.
It should now open in Notepad.
Copy and Paste the result of the scan in the reply box below.

The saved log will be called checkup.txt.
 

3 more replies
Relevance 78.3%

I'm getting this error message on 90% of programs I try to open. But if I keep trying it will eventually open. It doesn't happen on chrome/firefox, thankfully.

Another problem that I believe is connected to it is that I can't open a browse window. On photobucket for example I'll click "browse" and it won't open. But if I restart the browser a few times it will eventually work, just like the problem above. I had some sort of worm on my computer earlier this month. I removed it and since then ran multiple more scans (malware anti-bytes) and nothing new comes up.

Any help will be appreciated. I know this will be hard to diagnosis, but maybe the problem with the browse window might help narrow it down? It's the first time I've ever heard of that problem occurring.

Thanks.

Answer:"encountered a problem and needs to close" error messages, Can't open programs

Please avoid using IE as it only works if you purchase it and that too if its under warranty, else it might throw some or the other errors. Instead, you can try Google Chrome which never give you this sort of problem.

Moderator Edit: Ignore this post. It's completely untrue.

3 more replies
Relevance 78.3%

For about the past 3 month I have started to see fairly frequent app crashes with the "application has stopped working error". It appears this started the week of 4/8 (from what I can tell via Reliability Monitor.)

Here are some of the applications that have been affected:
Zune.exe
wlmail.exe
Microsoft intellipoint
Windows Desktop Gadgets
Skype
ehshell.exe

I did not make any major system/application changes (besides plugging in a new wireless keyboard temporarily)

My system is a Dell XPS 420 running Windows 7 Ultimate x86 (about 4 years old). OS runs on a 100GB SSD that was clean installed about 22 months ago.

Trying to find out if there is some larger issue mounting. Any help or guidance would be greatly appreciated.

Thank you!

Answer:Frequent "application has stopped working" error messages -Win7 x86

Device Concerns:
Code:
XPS MiniView USB\VID_BEEF&PID_0006\AAAAAAAAAAAAAAAAAAAA This device is disabled.
Was the above intentional? If so, please explain your troubleshooting steps.
Analysis:Your crashes all seem to stem from the same source:
Code:
Event[2162]:
Log Name: Application
Source: Application Error
Date: 2012-07-05T15:14:38.000
Event ID: 1000
Task: Application Crashing Events
Level: Error
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: MediaCenterSSD
Description:
Faulting application name: ipoint.exe, version: 8.20.468.0, time stamp: 0x4e320b14
Faulting module name: ipoint.exe, version: 8.20.468.0, time stamp: 0x4e320b14
Exception code: 0xc0000005
Fault offset: 0x000ab79e
Faulting process id: 0x820
Faulting application start time: 0x01cd5ac4c65b5408
Faulting application path: C:\Program Files\Microsoft IntelliPoint\ipoint.exe
Faulting module path: C:\Program Files\Microsoft IntelliPoint\ipoint.exe
Report Id: 0bac771a-c6de-11e1-affa-00222cffffff
See if re-installing your Microsoft Mouse software resolves your problems. First, uninstall the software through Start Menu -> Control Panel -> Uninstall a program. Then download the latest version of the software if you can. If it is not available for download, use your disc that came with your mouse. Install the software fresh.

My understanding of the information given in your logs came from Microsoft IntelliPoint Readme and Release Notes. Good luck!

3 more replies
Relevance 78.3%

Hi
Recently I've started getting an explorer window after starting up and loggin into XP and I get a file not found error, always with "/idlist,:xxx.yyy" where xxx and yyyy change each time. I've checked through the startup items in MSCONFIG and disabled some, to no avail. I'm extremely grateful for any insight you may have! Are we looking at something malicious?

Here is a Hijack This! log.

Logfile of HijackThis v1.99.1
Scan saved at 11:02:51 AM, on 1/31/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Cisco Systems\VPN Client\cvpnd.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\r_server.exe
C:\Program Files\Symantec AntiVirus\SavRoam.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\WINDOWS\system32\fxssvc.exe
... Read more

Answer:XP Startup with explorer window and an error with varying "idlist" messages

6 more replies
Relevance 78.3%

I posted this in the XP forum and was directed here, so I'll just paste my post from there. I will also include all logs the sticky reccomends.

I'm getting this error message on 90% of programs I try to open. But if I keep trying it will eventually open. It doesn't happen on chrome/firefox, thankfully.

Another problem that I believe is connected to it is that I can't open a browse window. On photobucket for example I'll click "browse" and it won't open. But if I restart the browser a few times it will eventually work, just like the problem above. I had some sort of worm on my computer earlier this month. I removed it and since then ran multiple more scans (malware anti-bytes) and nothing new comes up.

Any help will be appreciated. I know this will be hard to diagnosis, but maybe the problem with the browse window might help narrow it down? It's the first time I've ever heard of that problem occurring.

Thanks.



DDS (Ver_10-03-17.01) - NTFSx86
Run by Owner at 7:27:26.90 on Wed 05/26/2010
Internet Explorer: 6.0.2900.5512 BrowserJavaVersion: 1.6.0_20
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1527.784 [GMT -6:00]

AV: AVG 7.5.552 *On-access scanning enabled* (Outdated) {41564737-3200-1071-989B-0000E87B4FB1}
AV: avast! antivirus 4.8.1296 [VPS 100526-0] *On-access scanning disabled* (Updated) {7591DB91-41F0-48A3-B128-1A293FD8233D}

============== Running Processes ===============

C:\WINDOWS2\system32\svchost -k DcomL... Read more

Answer:"encountered a problem and needs to close" error messages, Can't open programs

Just going to bump this.

3 more replies
Relevance 78.3%

I get a number of these "task is corrupt or been tampered with" error messages when loading Task Scheduler.

In particular, I'm concerned about the System Restore task, found in \windows\system32\tasks\microsoft\windows\tasks\systemrestore (the SR task). I get the message and error code of 0x80041321.

I have lots of current and recent restore points in \system volume information.

I ran sfc /scannow to rebuild any problem system files.

vssadmin seems to show everything is ok with shadow copies.

I get the error message when running Control Panel...System...System Protection...Create. , so I cannot create a system restore point on my own. Restore points are created ok by Windows Update and other installer programs. I get "corrupt" message and error code of 0x80041321 when trying to run.

I have a clean system (no viruses) and am kind of stumped as to why these errors are occuring.
 

Answer:Solved: Task Scheduler "corrupt or tampered with" error messages

9 more replies
Relevance 78.3%

Hi, I have a very frustrating problem. One day I was playing a game and then my cp BSOD (it?s OC?d so I wasn?t too alarmed). Then I went to boot back up and all I got was a blinking cursor. No msg, no text, NOTHING! Well I looked around on the internet and though a combination of windows startup repair and bootrec, bootsec, diskpart and chkdsk I was able to get it to where now all it will say is ?Disk Read Error, press ctrl+alt+del to restart?. Of course pressing that does nothing. The weird thing is that I know the drive is good, I can read all the data off of it just fine. I don?t think it?s going out as it?s an 80gb intel ssd in a desktop with very good airflow, no issues there. Then when I try to go through windows startup repair it says no problems, clearly lying. Another weird thing is that when I first go to recovery options it will detect my os just fine, but then I run bootrec /scanos and it comes up with a BIG, FAT NOTHING!! I?ve been at this for about 8 hours on and off and I?m at my wits end. Any suggestions or tips are greatly appreciated! I really, really want to avoid formatting and re-installing because I very much want to not have to go through the huge hassle of re-installing EVERYTHING!! And even more so because I know the drive and data are good!
Thanks in advance guys J

Answer:Repeated "Disk Read Error" messages for no reason!

Anyone?

5 more replies
Relevance 78.3%

Lately whenever I attempt to install a new application I get the "application has stopped working" error message. Has happened now with several different applications. Sometimes I get an installation error 1001. Does anyone know why this occurs? Do I have a corrupt system file or registry? I have tried several different registry cleaners to no avail. Any help would be GREATLY appreciated. Thanks.

Answer:Frequent "application has stopped working" error messages!

Is it any program you try to install? Or just certain ones?

Can you upload a report so I can take a look at your event logs
http://www.sevenforums.com/crashes-d...tructions.html

5 more replies
Relevance 78.3%

I am using a host file to block ads with IE. When the ads are blocked an "Action cancelled" script appears where the ad would have been. Is there anyway to hideor remove this "error message" and only have blank space show up?

Thanks!
 

More replies
Relevance 78.3%

Hi,

After booting up my laptop (Dell studio 7 running Windows 7 Premium 64) today, two strange "Command Prompt Error" message appeared. They had something like "Hidden Startup" as the window title (I might not have remembered this completely accurately as I didn't think to take a screenshot or save them at the time).
I haven't seen these messages before, and since rebooting they haven't returned.
Is there a way of viewing them again so I can work out what they are and what might have caused them to appear? Any advice would be greatly appreciated.

Answer:Strange "Command Prompt Error" Messages on Startup

There may be others that know how to review the messages but before that
run an anti virus scan
Download and run a full scan with malwarebytes
Run a full scan with eset online.

9 more replies
Relevance 78.01%

the service cannot accept control messages at this time
Hi, I keep getting this message when I try to run anything. I've tried reinstalling programs or downloading anit-virus software, but nothing will run. I first noticed when I couldn't install drivers for a new printer. Anyone that can help is greatly appreciated. I don't know what's wrong and I don't know what else to do. Please help.
 

More replies
Relevance 78.01%

I never ever had this issue with Outlook Express. Suddenly, after I tried to delete some messages, I get the above error. I tried to move the messages to my deleted folder, nothing. I tried to move the store folder to another directory, nothing. I even uninstalled and uinstalled Windows Live, same thing. No success.

Any ideas? Workarounds?

Answer:Windows Live Mail: "Unexpected Error" - Unable to delete some messages

Hi Sammy, are all messages in your inbox fully downloaded ?

9 more replies
Relevance 78.01%

Hi all my computer has been playing up today when ever I open internet explorer 6 and go to another page its fine for about 20 seconds then an error message pops up regarding spyware/antivirus software then I click no and it redirects the page to a free antivirus page.
I have tried scanning for viruses and spyware with Mcaffe, viruses and spyware with AVG (picked up a few and removed) and also tried spybot which picked up heaps but the problem is still there.
I have been through the control panel and there is no software that shouldnt be there and have tried my best looking through the program files .

Please help me I am out of ideas.
Cheers Shane

Answer:Pop up error messages and "Free antivirus removal tool popup" how do I remove ??

I have downloaded another internet viewing program and thats working but if anyone knows how to fix this please let me know.

3 more replies
Relevance 78.01%

I'm posting this in the Vista forum because this has never happened with Windows 2000 or XP.

I bought two exact duplicate models of hard disks. I set up Vista Ultimate on one of my systems. I used Acronis True Image 10 to clone the operating disk to the factory-new, never-used, same model disk as a backup drive in the event the first disk failed. I put in the clone to be sure it runs; but, I get the error mentioned in the title of this thread.

Now, if the second disk is supposed to be a clone of the first, why does this happen and how can I fix it?

I'm not married to Acronis for this job so I would use any disk cloning tool that makes a sector-for-sector copy. I use Norton Ghost 2003 for making sector-for-sector raw image (forensic) copies of PATA drives; but, these are SATA drives and Ghost 2003 simply sits there like Tarbaby and he don't say nuttin' to no SATA drive.
 

Answer:"Windows failed to start" "\Windows\System32\winload.exe missing or corrupt"

7 more replies
Relevance 78.01%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Relevance 78.01%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

Answer:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Relevance 78.01%

Please help review my HijackThis File. My computer has problems with "Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups".

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:46:28 PM, on 10/24/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal

Edit by chaslang: Inline HJT log removed. READ & RUN ME FIRST. Malware Removal Guide sticky not followed.
 

Answer:"Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups"

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Please follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide
and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:

If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
If you cannot seem to login to an infected user account, try using a different user... Read more

5 more replies
Relevance 78.01%

Windows 7 Home Premium

I would provide a screenshot (or three) however that is at the crux of my problem - I should perhaps say my current problem...now, with "7" (I am beginning to tire RAPIDLY of 7, much more quickly than I did with either XP, or Vista).

PROBLEM: When I attempt to "Save As" a document (Notepad, for instance), or even a Paint image, I get a window/page/screen/whatever, that has no "Buttons" ... no button to "Save", no button to "Cancel". Simply NO BUTTONS???

I had this problem the other night, and we "faked" or cheated our way through it, by using the Enter (Return?) Key to advance the cursor (cursor??) to where we wanted to be (well, we "hoped" we were "there", anyway, since we could not "see" what button or drop-down dialog box was selected or highlighted).

It's almost as if I had a "Resolution" problem, whereby the resolution is set too low (say, 800 x 600), things are too big to be seen/won't FIT on the page. However, my resolution is set to the "Recommended" 1366 x 768.

Please help...this Netbook would be a WHOLE LOT easier to throw against a wall than my desktops ever were . . .

Thanks in advance,
glenn . . .
PS, Hoping I was/am clear here...under the drop-down boxes of "File Name" and "Save as Type", there is nothing to select - not "Save" or "OK" or "Cancel" ... NOTHING????... Read more

Answer:No "Buttons" to "Save" or "Cancel" in Dialog Boxes WIN7

Hi,

Type dpi into the Search box and choose "Make text smaller or larger" at the top of the search result list. In the window that opens see what it is set to. You want it at 100% rather than 125% or 150%. So if higher than 100% change it back to 100%. Hit Apply. You will need to reboot. See if that helps.
 

5 more replies
Relevance 78.01%

Hey there...I found a folder that I've never seen in my D partition before...I partition my hdd into 3 parts...C=OS installation...D=Programs and Games...E=Misc downloads and music and pr0n ...

Well I've never had a virus or anything in my D partition before...I just found this folder named "winnt" and it had some bat files and some kind of Airline JScript and something that looks like an airplane tracker...

Then in a folder named sdata (still in the winnt folder) there's files like 911, police, air, fire, etc...OMFG!!! This is like some terrorist thing or something...FBI is gonna find me and I'll never see the light of day again!!! I'll miss the [H] and I haven't even watched LOTR Extended Platinum Collectors DVD thing (the big ass package with those book holder things)...I haven't even completed Doom 3 or started playing HL2 or even had a chance to buy an X-Box and play Halo 2!!!

AHHHHHH!!!!!! WTF is this crap on my computer??? I'm gonna delete this...I should delete it right??? Scans say it isn't a virus but what do they know...I'm screwed...

THANX
C'YA
 

Answer:OMG!!! Found some folder with files like "911" "police" "air" and a airplane tracker!

if youre os is on C: there shouldn't be a winnt dir on d:, should be safe to delete it.
 

7 more replies
Relevance 78.01%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

Answer:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Relevance 78.01%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

Answer:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Relevance 78.01%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 78.01%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

Answer:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Relevance 78.01%

Hi, my sister dropped off a gateway MT3432 laptop and when i turned it on, nothing works, It starts up but nothing shows on the screen. I hear the system booting up and spinning off the hard drive but cant get to the BIOS screen or nothing. I tried plugging in an external monitor and still nothing. I don't know what the deal is. Plz Help. I replaced the ram and the harddrive and still doing the same thing.

Answer:GATEWAY LAPTOP WONT BOOT """"HELP""""

Did your sister say she had did anything to the machine?  Played with registry? dropped it?

3 more replies
Relevance 78.01%

I've recently started getting a series of bad image messages at start up and when I initiate a program for the first time. I have run Hijackthis and submit my log for any advice you may have.
Martyn
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 19:56:12, on 01/09/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\DRIVERS\CDANTSRV.EXE
C:\Program Files\iPod Access for Windows\iPAHelper.exe
C:\Program Files\Kontiki\KService.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
F:\Program Files\Photodex\ProShowProducer\ScsiAccess.exe
C:\Program Files\Spyware Doctor\pctsAuxs.exe
C:\Program Files\Spyware Doctor\pctsSvc.exe
C:\Program Files\Spyware Doctor\pctsTray.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WIND... Read more

Answer:Solved: "Bad Image" error messages at start up

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

3 more replies
Relevance 78.01%

I'm not sure where my original post went so I'll try again.

Please help, my computer is a mess! See attached HJT log.

I've been getting many error messages saying "This program has performed an illegal operation and will be shut down..."
It does not matter what program I'm running, I get this message all the time. I can no longer access MSN.com, but can access other websites.

I have Windows 98 SE and have run SuperAnti spyware V4.0.1154 and CCleaner V.2.06.567.
Please check this Hijack report and see if there is anything I'm missing that is harming this computer. I used the HP Pavilion recovery disk yesterday after windows became corrupt.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:30:17 PM, on 5/9/08
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v5.00 (5.00.2614.3500)
Boot mode: Normal

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\WINDOWS\SYSTEM\MSGLOOP.EXE
C:\WINDOWS\SYSTEM\MSG32.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\WINDOWS\SYSTEM\HPSYSDRV.EXE
C:\WINDOWS\SYSTEM\USBMMKBD.EXE
C:\PROGRAM FILES\DIRECTCD\DIRECTCD.EXE
C:\WINDOWS\RunDLL.exe
C:\PROGRAM FILES\SUPERANTISPYWARE\SUPERANTISPYWARE.EXE
C:\PROGRAM FILES\MICROSOFT OFFICE\OFFICE\OSA.EXE
C:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\WORKS SHARED\WKCALREM.EXE
C:\PROGRAM FILES\MICRO... Read more

More replies
Relevance 78.01%

Hi all - hope you enjoyed the holidays.

Husband installed a Windows update this morning.

Upon reboot, system went into Check Disk and reported multiple errors.

Once Windows loaded, a bunch of DOS shell windows began opening.

Then every program he clicked gave an error message that the DLL file was missing.

He has IE running and MSN Messenger; no sound. I Googled one error message and then had him try to open Add/Remove Programs at the cmd prompt. It wouldn't, and the error message given was:

Error in shell32.dll

Missing entry: control_run.dll

NOD32 system scan hung up at 20% so he gave up on that.

He says his computer occasionally runs Check Disk on reboot. Are we looking at an infiltrator here or maybe a failing hard drive?

Thanks for anything you can offer. That is our "business" PC so he's freaking out, of course.
 

Answer:Solved: Bunch of "missing DLL" error messages

15 more replies
Relevance 77.72%

My computer gets the following Error Message everytime I try to go on Fire Fox, Restore to an ealier date, go to a website from a web address in an email in Outlook Express, download certain software or downloads:

XUL Runner
Errorlatform version 1.9.0.4 is not compatible with min version>=1.9.0.5. max version<=1.9.0.5 .

I am able, however, to get on the Internet with Internet Explorer. When I Clean the Disk, the number value of stuff to erase increases rather than get wipped out. It is now up over 300,000 MB's. It slowly started at 25 MB's and has grown very, very slowly. I Clean the Disk and Degfrag every time I use the computer.

My system is a Dell Dimension 3000 using Windows XP Home Edition.

This ubiquitous error message constantly pops up and blocks me from doing certain things. I have tried Restoring the computer to an earlier date. I have used the Dell drivers to try to clean the hard drive, but I am blocked.

I first noticed this in early November 2008. The Verizon Anti-Virus System did nothing to alert me to any viruses.

I have spent a good amount of time trying to solve the problem, but it is out of my knowledge of information.

Any help is appreciated.
Thanks
Zyklon
 

Answer:Error Message "XUL Runner" Platform Version "1.9.0.4" not Compatible

Ok let us start simply
This may just be a corrupted install of firefox or and incompatability issue with a add-on.

Some Firefox issues can be resolved by downloading a new Firefox installer from Mozilla.com and then closing Firefox, deleting the Firefox installation directory and reinstalling Firefox. (On a typical Windows install, you would delete the C:\Program Files\Mozilla Firefox folder and then reinstall Firefox using the "Standard" Setup Type.) Another option would be to uninstall Firefox and then reinstall into a different folder location, which is done using the "Custom" Setup Type on Windows and choosing a different Destination Folder for the install location (e.g., C:\Program Files\Firefox3). [3]

or for a completely clean install of FF

* First, download an official version of Firefox from Mozilla.com (or download Firefox 2 if your system can't run the current version) and save it to your desktop or other location. Avoid unofficial download sites that bundle Firefox with other software such as the Google Toolbar.
* Next, completely uninstall your current version of Firefox as outlined in Uninstalling Firefox. (Note that removing the Firefox installation directory will also fix some problems related to old or incompatible browser plugins on Windows systems, by removing plugin files that may be contained in the C:\Program Files\Mozilla Firefox\plugins folder.)
* Important: If you haven't already created a new Firefox profil... Read more

2 more replies
Relevance 77.72%

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

One suggestion that I found is to download drivers for my "chipset" or mobo. Unfortunately, I don't know what my chipset/mobo brand/model is, and don't know how to find out. If this is the solution, how can I find out? If this isn't the solution, what is?

If this could be solved ASAP, that would be lovely, as I'm going through video game withdrawl here (also scrolling in Firefox is all jerky and some videos are jerky when playing).

Thanks in advance,
Robbie B

Answer:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

After an unedifying series of adventures I got to http://www.msi.com.tw/program/suppor...?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mentioned a VGA upgrade, but I'm uncomfortable with upgrading the BIOS if it's possible that that's not the main issue.

3 more replies
Relevance 77.72%

Windows XP
SP 2

I have two main problems and from some of the other threads I've viewed they might be related. 1) Whenever I try to open "My Computer" or "Control Panel", etc. I get this "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience." Then my system freezez up for a while until I CTRL ALT DEL and end "drwtsn" manually. 2) I think I have some adware. My internet hope page keeps reverting to "about:blank" regardless of what I change it to. I am also getting some porn links in my "favorites" list and if I delete them they just go back. I've run scans with Norton, AdAware SE, SpyBot, and Nod32 and I also have SpywareBlaster running. I don't know what to do! Please help!

Here's my hijack this scan:

Logfile of HijackThis v1.99.1
Scan saved at 6:33:20 PM, on 3/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common File... Read more

More replies
Relevance 77.72%

Every time i try to download a file i get a box saying "Explorer cannot open site "x" the site may be busy pls try again later..... this happens EVERY TIME i can't download anything.... can't open attachments on emails..... hellllllllp!!!!! what have i done!!!!
 

Answer:every time i download i get error " explorer cannot open site "x"......."

7 more replies
Relevance 77.72%

Windows XP
SP 2

I have two main problems and from some of the other threads I've viewed they might be related. 1) Whenever I try to open "My Computer" or "Control Panel", etc. I get this "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience." Then my system freezez up for a while until I CTRL ALT DEL and end "drwtsn" manually. 2) I think I have some adware. My internet hope page keeps reverting to "about:blank" regardless of what I change it to. I am also getting some porn links in my "favorites" list and if I delete them they just go back. I've run scans with Norton, AdAware SE, SpyBot, and Nod32 and I also have SpywareBlaster running. I don't know what to do! Please help!

Here's my hijack this scan:

Logfile of HijackThis v1.99.1
Scan saved at 6:33:20 PM, on 3/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common File... Read more

More replies
Relevance 77.72%

Windows XP
SP 2

I have two main problems and from some of the other threads I've viewed they might be related. 1) Whenever I try to open "My Computer" or "Control Panel", etc. I get this "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience." Then my system freezez up for a while until I CTRL ALT DEL and end "drwtsn" manually. 2) I think I have some adware. My internet hope page keeps reverting to "blank: about" regardless of what I change it to. I am also getting some porn links in my "favorites" list and if I delete them they just go back. I've run scans with Norton, AdAware SE, SpyBot, and Nod32 and I also have SpywareBlaster running. I don't know what to do! Please help!

Here's my hijack this scan:

Logfile of HijackThis v1.99.1
Scan saved at 6:33:20 PM, on 3/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common Fil... Read more

More replies
Relevance 77.72%

Hi,

I have a Toshiba r700-181 (PT310E) work laptop. It is running Windows 7 x64 Enterprise.

It has one 4GB stick of ram which is PC3 10600. Windows works fine with this.

I have obtained a 4GB stick of ram which is PC3 12800. With just this one in, Windows works fine.

However, if I have BOTH sticks put in, the BIOS recognises that there is 8GB installed, but Windows fails to boot.

It gets stuck at the "Starting Windows" screen. If I restart it asks me if I want to start windows normally or to run the Windows repair. If I try that I get the message: "Error: 0xc0000225. The boot selection failed because a required device is inaccessible."

I tried using a Windows 7 System Restore disc but that doesnt work...

If I try either of the sticks in the laptop one at a time, then Windows 7 boots up fine.

Is this just down to the laptop not being compatible with the mixture of speeds? I thought that if they were mixed it would just use the lower speed by default?

So confused

Answer:Laptop hangs at "Starting Windows" or getting "Error 0xC0000225"

Hello borito, Welcome to SevenForums!

Is this a laptop provided by a company you work for by any chance?

9 more replies
Relevance 77.72%

To anyone that can help me out:

I purchased a windows anytime upgrade key and upgraded my system from windows 7 home premiuim to windows 7 ultimate now when my windows tries to update I get this: (See image titled "message")



To bring you up to speed as to what I've done so far:
I ran sfc\scannow and no errors were found
I downloaded the hotfixes and apllied them and still could not update
I tried to do a system restore to the point before I upgraded, but I could not perform one because all of my previous attempts to update windows automatically creates a system restore and all the restore points were within a 24 hour period
I installed a system update readiness tool as per "windows help and support" dialogue box

To see the updates that did not install, refer to the image titled "update"

Really, I feel like I've done my homework and I've exhausted my efforts as to how to fix this problem. I'm currently going to school for computers and so I really like to apply what I learn in real world situations, but this one has got me stumped!

I'm also attaching my checksur.log I don't understand it now and it looks like a foreign language to me, but as I progress through my information systems degree I hope one day I can become a techsupport forum partner.

Any help would be greatly appreciated!!

Thanks in advance,

Techstudent36

HERE IS MY CHECKSUR.LOG


=================================
Checking System Update Read... Read more

Answer:windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt000"

Hi have you tried running a start up repair An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

7 more replies
Relevance 77.72%

Hi, just as the question title says, I am having a RunDLL error with the windows dll "streamci.dll".

I am getting this error while trying to install my Audio Drivers on my newly set up XP OS.

During the installation of XP, a couple of files were not copied properly.
because the CD was scratched up pretty badly, but I had no other copy of the CD, I had to just skip and hope windows installed, and was usable...

Are there any tools, that can scan your computer for missing windows DLL's and re-install them?
I have already tried downloading the file streamci.dll from the internet and installing it with

Code:
regsvr32 streamci.dll
in the command line, but I get the following error:
RegSvr32

"Streamci.dll was loaded, but the DllRegisterServer entry point was not found.
This file can not be registered."Click to expand...

Would downloading and re-installing SP2 from microsoft, possibly fix this problem?

Any Ideas?
 

Answer:RUNDLL ~ "Error Loading Streamci" ~ "The Specified module could not be found"

What version of XP Pro did you install with that CD?

XP Pro original

XP Pro SP1

XP Pro SP2

Have you downloaded and installed the SP3 upgrade?

-----------------------------------------------------------------
 

1 more replies
Relevance 77.72%

Wanted to resurrect an older thread, but its closed :
http://forums.techguy.org/windows-xp/652638-error-moving-file-folder-directory.html

Please read completely before responding.
I am a 30 year IT pro, most of it as a programmer. I am the geek in charge of a tech non profit org in Hawaii. www.HawaiianHope.org
so yea.. i have at least half a clue.

Here is the deal.
In doing drive copies, data recoveries, etc... when we are moving a mass amount of data from one drive to another we run into this problem a lot.
"Error moving file or folder" -- "directory is not empty"
If you restart the move, it will continue on and keep going, restart enough times and eventually it will move all directories.

I think its a programming issue with windows and wonder if anyone has a work around ?

I have a suspicion that the copy process is getting out of sequence. That it is trying to move a folder before it actually emptied it. Possibilities are :
1) windows forgot its place in moving through and navigating numerous sub directories and it is having a problem with “recursive calls.”
2) Computers with hyper threading or dual core processors are spawning the movement of files across multiple processes, and some are getting ahead of the other.
3) It did actually move the file, but the cache or something in memory has not updated, or the full data write has not completed yet before it tried to move the directory. (delayed write)
Yes, you can copy and then delete the old... Read more

Answer:"Error moving file or folder" -- "directory is not empty"

This is a known issue. It is by design.

As you may know, moving is in its essence an unsafe process. It would be better to use the actual sequence of copy and then delete.
 

3 more replies
Relevance 77.72%

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

Answer:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

13 more replies
Relevance 77.43%

Question 



Applies to 

Windows Windows 7 Security, privacy, & accounts Security and privacy

15 views
Windows 7 Ultimate- error regarding allowing Log in as Service "An unexpected error has occurred, Failed to save Local Policy Database"



TA

TageAndersson asked on <button aria-label="Date" class="msaActionText msgHistoryBtn info-panel-toggle-link"
data-panelcontainer=".userInfo" data-paneltarget="#message-history-holder-4326ef11-7243-4aff-947a-6bf7ef764212" style="color:#006cd8;font-style:inherit;font-variant:inherit;font-weight:inherit;font-size:inherit;line-height:inherit;font-family:inherit;margin:0px;cursor:pointer;padding:0px;border:none;display:inline;"
title="See post history">April 7, 2016</button>


During a long period, I'm  doing a huge jobs to take back ownership for files, as attributes (write protected) atrib. My database for network policy setting, secedit.sdb have problem, corrupted(?). So to check my database, I went to CMD as
administrator. From CMD I run:
esentutl /g %windir%\security\database\secedit.sdb

Result:
C:\Windows\system32>esentutl /g %windir%\security\database\secedit.sdb
 
Extensible Storage Engine Utilities for Microsoft(R) Windows(R)
Version 6.1
Copyright (C) Microsoft Corporation. All Rights Reserved.
 
Error: Access to source database 'C:\Windows\security\database\... Read more

More replies
Relevance 77.14%

I keep getting this error when trying to do an online restore, "Failed to initialize reporter: Cannot open database <DBName> requested by the login. Login Failed."  What can I do to resolve this issue?  We are running Management Console 3.0 Version 6.3 (Build 9600).
Recovery Manager for Active Directory
Dell Inc.
Version: 8.7.1.8918
Thanks.
 

Answer:Dell Recovery Manager Error "Failed to initialize reporter: Cannot open database <DBName> requested by the login. Login Failed"

We have discovered, that if we uncheck the Generate reports while trying to run the online restore, that it will work. We are unsure yet what exactly is causing the issue, but unchecking Generate Report allows us to move forward and complete the process.

1 more replies
Relevance 77.14%

I'm using XP on a Dell inspiron 1501 with a linksys wtg-54G router. My other laptop works fine on the network but with this one I get a strong signal but limited or no connectivity.
Wireless Network Connection :
Physical Address...................................00-1A-92-1F-5F
Dhcp enabled....................................... Yes
Autoconfiguration Enabled...................... Yes
Autoconfiguration IP Address.................. 169.254.129.113
Subnet Mask ...................................... 255.255.0.0
Default Gateway ................................. 169.254.129.113

Any ideas ?

Any ideas ?
 

Answer:Solved: XP "Limited or no connectivity" with strong signal

16 more replies
Relevance 77.14%

I keep receiving error messages stating that there are registry and system errors. But they look kinda shady and they refer around 10 web sites (a diff. one in each msg) like regscan32.com and regwinclean.com. I've had about 25-30(and counting) pop up in the last couple of hours.However,when scanning system I can't find anything wrong, but the msgs wont stop. PLEASE HELP!!! Newest message reads: "Buffer overrun in messenger service allows remote code execution,virus infection and unexpected shutdowns,Affected Software is Windows NT Workstation, NT Server 4.0, 2000, XP, Win98, Server 2003 and the Non Affected Software is Windows Millennium Edition." I am not so computer savvy, so if anyone has any idea whats going on it would be a great help.Thanks, Shilly
 

More replies
Relevance 77.14%

Hi

I wonder if you can help me. I own a 2008 Dell Studio laptop running Vista. Recently I've been getting three error messages on start up which read:

"Error loading C:\Users\[Name]\AppDate\Local\Temp\xxyvwUOh.dll
The specified module could not be found."

"Error loading C:\Users\[Name]\AppDate\Local\Temp\qeeykrv.dll
The specified module could not be found."

"Error loading C:\Users\[Name]\AppDate\Local\Temp\_c00CD681.dat
The specified module could not be found."

I've run HijackThis and this is the log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:24:46 p.m., on 23/10/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
c:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\DellTPad\Apoint.exe
C:\Program Files\IDT\WDM\sttray.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Windows\System32\WLTRAY.EXE
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Program Files\ATI Technologies\ATI.ACE\Core-Static\MOM.exe
C:\Program Files\Dell Webcam\Dell Webcam Central\WebcamDell.exe
C:\Program Files\Dell\MediaDirect\PCMService.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\WIDCOMM\Bluetooth Software\BTTray.exe
C:\Program Files\Dell\QuickSet\quickset.exe
C:\Program Files\WinZi... Read more

Answer:3 "Error loading" messages on start up

12 more replies