Computer Support Forum

Router won't work properly

Question: Router won't work properly

So,currently I have a modem in the living room (Cisco EPC3208) and then it goes all the way to my room to a Cisco WRTG54V1 router. Yesterday out of the blue it stopped working, This is because I previously had 2 routers in the network (Asus and Cisco) anyways I decided to disconnect my asus and use only the cisco,but the router just won't work,I reseted it to it's fabric settings. But when I log into it it says the router's IP adress is 0.0.0.0 ? And hands out IP adresses to my pc such as 192.168.1.103,I have no idea what to do!

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\MiKi>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : MiKi-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sbb.rs

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : sbb.rs
Description . . . . . . . . . . . : Intel(R) 82579V Gigabit Network Connectio
n
Physical Address. . . . . . . . . : 90-2B-34-31-B6-8E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::448d:137d:34ca:6197%11(Preferred)
IPv4 Address. . . . . . . . . . . : 94.189.187.170(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.252.0
Lease Obtained. . . . . . . . . . : Wednesday, June 25, 2014 9:06:18 AM
Lease Expires . . . . . . . . . . : Wednesday, June 25, 2014 10:06:18 AM
Default Gateway . . . . . . . . . : 94.189.184.1
DHCP Server . . . . . . . . . . . : 89.216.1.66
DHCPv6 IAID . . . . . . . . . . . : 244329268
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-B0-D1-EB-90-2B-34-31-B6-8E

DNS Servers . . . . . . . . . . . : 89.216.1.30
89.216.1.50
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.sbb.rs:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : sbb.rs
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:3488:334e:a142:4455(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::3488:334e:a142:4455%13(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter 6TO4 Adapter:

Connection-specific DNS Suffix . : sbb.rs
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:5ebd:bbaa::5ebd:bbaa(Preferred)
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : 89.216.1.30
89.216.1.50
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\MiKi>
This is my ipconfig with the modem and this is with my router
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\MiKi>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : MiKi-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82579V Gigabit Network Connectio
n
Physical Address. . . . . . . . . : 90-2B-34-31-B6-8E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::448d:137d:34ca:6197%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, June 25, 2014 9:27:52 AM
Lease Expires . . . . . . . . . . : Thursday, June 26, 2014 9:27:51 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 244329268
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-B0-D1-EB-90-2B-34-31-B6-8E

DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{8422BE24-1248-4BA9-823E-314B4361A85F}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\MiKi>

Relevance 100%
Preferred Solution: Router won't work properly

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Router won't work properly

Have you tried pressing the reset button on the router? (long press)
I have seen this 'reset button' on several router brands/models like tp-link (tl-wr941n, tl-wr740n old version, tl-wr740n newer version), buffalo draft-N routers, cdrking routers (made in china router brand sold in the Philippines).

if the reset process I described is the same as what you typed in your first post, try to manually change the router ip address.

my wimax modem ip address = 192.168.1.1
so for the tp-link wr-740 router, I use ip address - 192.168.0.1

login to your router and change it. if there's any save button, click it. my router prompts me to reboot the router. after a few seconds, the preferred ip address I have chosen is good for use.
(I have hidden my MAC address)

10 more replies
Relevance 63.55%

have purchased a SOHO broadband router from maplin to connect my pc and my wifesboth pc have win xp pro wife has amd duron 800 over 600mb sdrammy pc has xp2000+ with over gb of ddrcan get both sysyem talking then the system stops and cant connect to the netbroadband provided bt telewestcan any one help or give advicetelewest wont support the routerthanks in advance ray

Answer:cant get router to work properly

Which model router have you, telewest will only work with a cable router not an adsl router.

4 more replies
Relevance 61.09%

Cuz I Cant Connect To Some Ppl With My Router...i Have A Hard Time..

But Without The Router Its Fine..


I Contacted Linksys....but They Said I Needed To Find Out What Ports Need To Be Open..and To Open Them.
 

Answer:What Ports On My Router Need To Be Opened For Online Gaming To Work Properly?

read linksys manual on how to open the correct ports for the video game
the ports very from one vender to another
 

2 more replies
Relevance 53.3%

I have no idea what my sister and her friends were doing on the comp for a couple of days that i decided not to use it, but now:

- a few programs take forever to load or don't load at all, but they do show up under the processes tab in the task manager
- after pressing Ctrl Alt Del, the task manager icon appears in the system tray, but the thing only shows up a minute later
- my system recovery is "not able to protect my computer," and restarting does nothing
- actually, when restarting or shutting down Windows, it stops at where it only shows my desktop background and cursor [which is still able to move] and nothing else after that, so i have to hold the power button and force it to shut off
- when I right click the desktop and click on "Properties..." [or something similar to this action] it doesn't show up at all, and whenever I try to open any application after that, they don't even load at all either

Things i've tried to get rid of these problems:
- Virus scan with avast!, a couple viruses found and fixed, but nothing changed.
- disk clean up, nothing changed
- registry clean, nothing changed
- CURRENTLY defragging my C drive, hope something changes..

Anyone know what the heck's going on!?
Anyone got any suggestions on what to do next?
Anything helps and would be greatly appreciated!
 

Answer:Apps not starting properly, sys. recov. doesn't work, can't shut down properly, etc..

no replies yet?

anyway, just stopped by to say that when shutting down, it takes forever to get to the "Saving your settings..." screen, and that's where I decided that it stops and nothing else after that.
Defragged my C drive, still no results besides the computer feeling a bit smoother-running o_o
 

1 more replies
Relevance 49.2%

The title pretty much says it all. I'm honestly at the end of my rope. Device manager replies all is well, yet sound stopped working overnight.

It isn't muted,I'm not that oblivious.

I own Advanced System Care Pro ( and consequently, Driver Booster ) so I have already all of my drivers up to date, as well as any other problems I might have had.

Used a bunch of other scanners to figure out the problem to no avail. Plugging some headphones in also doesn't cut it, so it made me think that perhaps the hardware was actually fine and some software conflict was the cause of the problem. I have no freaking clue anymore, should I just get mad and yell at my computer for an hour or so to relieve stress now??
 

Answer:Laptop audio refuses to work, all devices work properly, sound isn't muted. Help?

First we need to know the EXACT make and model number of the laptop in question. Secondly the only place you should be looking for drivers for you laptop is the laptop manufacturers support website. Driver scanners really are not helpful.
 

2 more replies
Relevance 49.2%

Hello People Im in need of your expertise. here are a few scans i ran I hope these can help you tell what my problems are...ComboFix 08-07-31.04 - uuurbody 2008-11-02 8:36:39.2 - NTFSx86Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.256 [GMT -5:00]Running from: E:\Documents and Settings\uuurbody\Desktop\ComboFix.exe.- REDUCED FUNCTIONALITY MODE -.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).I:\Autorun.inf.((((((((((((((((((((((((( Files Created from 2008-10-02 to 2008-11-02 ))))))))))))))))))))))))))))))).2008-11-01 22:03 . 2008-11-01 22:03 <DIR> d-------- E:\Documents and Settings\All Users\Application Data\Nero2008-11-01 19:08 . 2008-11-01 19:08 0 --a------ E:\WINDOWS.0\Irremote.ini2008-11-01 18:16 . 2008-11-02 08:37 <DIR> d-a------ E:\Documents and Settings\All Users\Application Data\TEMP2008-10-22 13:12 . 2008-04-27 09:33 765,952 --a------ E:\WINDOWS.0\system32\xvidcore.dll2008-10-22 13:12 . 2008-04-27 09:35 180,224 --a------ E:\WINDOWS.0\system32\xvidvfw.dll2008-10-22 13:12 . 2007-06-28 17:55 77,824 --a------ E:\WINDOWS.0\system32\xvid.ax2008-10-15 01:11 . 2008-08-14 05:11 2,189,184 -----c--- E:\WINDOWS.0\system32\dllcache\ntoskrnl.exe2008-10-15 01:11 . 2008-08-14 05:09 2,145,280 -----c--- E:\WINDOWS.0\system32\dllcache\... Read more

Answer:comp is slow Nero doesnt work properly doesnt always start properly

ComboFix logs should not to be posted outside the HijackThis forums. It is an extremely powerful tool which should only be used when instructed to do so by someone who has been properly trained. ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again.Please create a new topic explaining the nature of your problem in the Am I infected? What do I do? forum. Describe pop-ups and system tray or desktop icons that have appeared. Explain what is "going wrong" with your computer. Note any tools you have used and their respective results.If needed, we will direct you to our HJT Preparation Guide.Thank you for using BleepingComputer as your malware removal source.I will have a moderator close this topic.

1 more replies
Relevance 48.79%

Hi,

My Sat Pro 6100 has just been away for the usual motherboard and power board replacement with Toshiba, but now I have a strange keyboard problem.

When I turn it on, all the keys work. After a few minutes, '3' doesn't work, then 'r' fails, then '5','7','8','9','0' stop working. At this stage I can feel something getting very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with an external PS2 keyboard, and the internal keyboard is still faulty (some keys work, others don't) but the external one works correctly.

Now if the pc didn't get so hot under the middle of the internal keyboard, then I would conclude that the keyboard was faulty, but for it to fail slowly and sequentially like this, and it fails the same way every day (Since the Toshiba rebuild!).

Maybe, internal keyboard controller overheating?
Does anyone know what this might be? :-(

Cheers,
Homer

Answer:Keyboard on Sat Pro 6100 doesn't work properly after remedial work

Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs into the same card). It is normal that this part becomes warm during usage.

It's strange that your problem appears after a while and not right away.

It might be just an improper reseating of the keyboard cable (it's a thin layer like a photo film-negative) that easily pops out, but... it can be something more serious, too. (Especially since you had the upgrade done where hardware had to be changed)

I would consult the service center once again and ask for instructions how to deal with this. Don't ignore it (by using an external keyboard instead of the malfunctioning internal) as it might end up into something more serious soon...

Regards

electrochain

P.S. Please keep us updated on your steps

1 more replies
Relevance 45.51%

I am having nearly the same problem at both my work and home. Though they are slightly different i think they can be handke in the smae way. First at work. We have our first router that controls nearly all of our computers and is workin properly. We have a second router that we installed so that our workers wth laptop could have wireless internet and networking. This was workin fine for a couple of weeks but not is on the frits. The computer notice that the wireless internet is there but it cant utilize the system. I cant renew or release the ip address and it doesnt display the whole network. Any suggestions?

Next whats up at home. I have a Linksys wireless router and cable modem for my computers at home. I have had multiple problems with the system at home but those problems were easily resolved with a simple reset. Now I have come across a bit of a big pickle. Whenever i get goin on the internet or a file sharing the connection will go dead in about 5 minutes. I reset everything and yet again the connection goes dead after a few minutes. What can I do do make all these little and big problems go away for good?
 

Answer:Router Not Workin Properly

I also forgot to mention that I'm pretty sure that it is just the router with the problems because i have ran a direct line from the modem to my computer and have had no problems.
 

3 more replies
Relevance 45.51%

I just bought a router and I want to make sure I have the appropriate security in place. I'm new to all this wireless home networking internet mumbo jumbo so please excuse my inexperience.

We just got a second computer for the house. We went to an electronics store and told them we wanted to share the same cable/modem internet connection. They recommended a D-Link router and USB Wireless adapter. I connected the router to the computer with the wire connection (Comp1) and connected the adapter to the computer which will receive the signal for the wireless connection (Comp2).

My concern is this, as I understand it, anyone with a USB adapter within 150ft of the router can pick up on the signal and share our network. As I installed the necessary softwares, it appears that there is at least one other wireless user in the area. His/her network is password protected. Ours is not. What is the best means to secure our network? Thank you very much.
 

Answer:New router... how do I properly secure?

6 more replies
Relevance 45.51%

I got a new router and it has full bar connection, but it always have trouble connecting.
Right now I'm on a different person's connection because of it.
But I'd like to connect to my own connection.

Answer:New router and cannot connect properly

what exactly is going on

9 more replies
Relevance 45.51%

I am having nearly the same problem at both my work and home. Though they are slightly different i think they can be handke in the smae way. First at work. We have our first router that controls nearly all of our computers and is workin properly. We have a second router that we installed so that our workers wth laptop could have wireless internet and networking. This was workin fine for a couple of weeks but not is on the frits. The computer notice that the wireless internet is there but it cant utilize the system. I cant renew or release the ip address and it doesnt display the whole network. Any suggestions?

Next whats up at home. I have a Linksys wireless router and cable modem for my computers at home. I have had multiple problems with the system at home but those problems were easily resolved with a simple reset. Now I have come across a bit of a big pickle. Whenever i get goin on the internet or a file sharing the connection will go dead in about 5 minutes. I reset everything and yet again the connection goes dead after a few minutes. What can I do do make all these little and big problems go away for good?

I'm pretty sure that it is just the router with the problems because i have ran a direct line from the modem to my computer and have had no problems.
 

More replies
Relevance 44.69%

I have a problem with one of my networked PC's when trying to use it with my new router.

PC: Windows 2000 (Wired)
PC: Windows Vista (Wired)
Laptop: Windows Vista (Wireless)
Cable Modem: Unknown brand from Comcast
Old Router: Linksys BEFSR41
New Router:Wireless D-Link DIR-655
Jet Direct box for the printer

The W2K machine will not load pages properly when attached (wired, it has no wireless card) to the new router. Sometimes it gives the page not found error but usually it trys to load the page but can't load graphics to various degrees. Sometime it can't get a few pictures and sometimes it's everything like page design graphics.

It works fine when attached directly to the Cable Modem. It also works fine when the old router is between the PC and the cable modem. Both of the other PC's work fine with the new router, one wired and one wireless.

I have worked with the router tech support and they have had me lower the MTU setting on the router in increments of 10 down from 1500 to 1400. No help. I did look at the MTU settings on the old router and it is marked disabled. There is no check box to disable MTU on the new router.

Right now I have both routers hooked up, Cable Modem > Old Router > New Router, with everything hooked up to the Old Router except the Laptop, which is using the wireless on the New Router. I guess this is OK except the Laptop can't see the printer.

Any advice?
 

Answer:W2K PC won't properly load web pages on new router

11 more replies
Relevance 44.69%

second time I post here.

I have a home Server and it not letting my friends come and play the games i have set up in it. Using internet normally works with no problems and so does WiFi. I'm using a TM-AC1900 Dual-band Wireless Router Can anyone
 

More replies
Relevance 44.69%

Hello comunnity!
I know there are plenty of threads like this, ive read as much as possible before i posted this one but nothing seems to be working for me. I will try to type this as easy to understand as possible.

ISSUE: My Zyxel router which we get from our new ISP few weeks ago started acting weird last days. Since we got it my brother had problems with it on his laptop with Ubuntu. He was getting DNS error once a day, he had to disconnect and connect from WiFi to make it work again. I was fine in that time. Now since yesterday i started to get this kind of error too. Pretty often i typed webpage it simply told me DNS could not be reached. Also I should have speed around 10 Mbit/s i was getting that speed at start but now its sometimes around half of that, then back to full speed than drop again and again. Like rollercoaster. Im pretty helpless right now dont know what to do.
I first noticed this problem when i was playing online games. My speed was great but ping was too high. I tried another game, another server, still the same. Now also speed drops.

I TRIED: Upgrading firmware, changing channel from 11 to 6 and 1, adding our laptops to Static DHCP instead of Dynamic, changing obtaining DNS from Dynamic to "From ISP" and also Static with Googles DNS and OpenDNS, tried to check my ISP if they dont have some kind of maintenance. Router is in open space in house, no walls around, no overheating, working fine on cable. So it has to be WiFi problem.

WHAT I DID N... Read more

Answer:Router suddenly not working properly

DrMattes said:


Connection Rate: 11 MbpsClick to expand...

Implies that your wireless adapter or the router is using 802.11b only. Make sure that the router's wireless mode is not set to that.
 

3 more replies
Relevance 44.69%

Currently have a Belkin F5D5231-4 Router & a Hawking Wireless G router. I'm looking to replace the Hawking Wireless G with a Wireless N router. I bought a Belkin N150 wireless router, but I can't get it to work with my Belkin Router. With the Hawking, it didn't matter if the Hawking was first off of the Modem or the Belkin, they both worked. Now with the Belkin N150, only one will work. I can't get them both to work. Any advice on getting them both to work or a Wireless N router that will?
 

More replies
Relevance 44.28%

:confused: Purchased new Belkin Wireless Router 54g Model F5D7230-4, 5 units, to provide wireless connection for 5 different sites, with PC cards, notebook adaptiors, all by Belkin.Followed all the instructions step-by-step in the Quick Installation Guide, and the User Manual, no step was skippedHowever, after the "Easy Install Wizard" finished "examining" my settings, the next window was the "finished"; instructions indicated that the hardware must be installed after the examination was complete, and then, I would see the "finished" window; anyway, I continues with the hardware installation EXACTLY as instructed to.After this, there was no "check", and no "configure" as indicated by the instruction manual. So I clicked on the "finish" button.1. The Power Led was a solid green, indicating router ready.2. The WLAN was solid green, indicating Wireless Network ready.3.The LAN port-status LED was orange, indicating 100Base-Txdevice connected.4. The WAN Status LED was orange; there is no explanation in either manuals for this colour.5. The "Connected LED" was blinking green, indicating router attempting to connect to the internet.i was unable also to connect to the internet using the PC, no page would display. Meanwhile, the DSL LED's were all as they should be, indicating a good and proper DSL link withthe ISP.Eventually, I reset the Belkin Router, no joy.I disconnected the Belkin Router and then the PC was able to connect to the internet with no problem, which is how I am sendin... Read more

Answer:Belkin Wireless Router 54g not installed properly?

The Belkin Router is jumping frmo Step 1, "Examine", to the last step, which is "Finished".I tried the install again, but the same result. Can anyone please help?Thanks

7 more replies
Relevance 44.28%

My modem (Siemens SpeedStream 4100) and router (Linksys WRT120) both function properly, but my desktop computer (HP-Pavillion Elite m9077c) won't connect to the internet. I never had a problem connecting up until a month ago, but since then, nothing. I know the modem and router function properly because all the wireless devices in our house (e.g., laptops, Wii, xbox) can still connect, and I can plug an ethernet cable into the router and the laptop and it connects. The device manager on the desktops says that the network adapter (Intel 82566DC-2 Gigabit) and the wireless adaptor (USB wireless 802.11 b/g) are functioning properly.

I tried several things to try to resolve this, such as, disabling the Windows firewall, but no luck. At this point, I think I need to work through this systematically, and that's where I need your help. Whatever information you need from me, let me know, and I'll provide it.

Below is a screen shot of my ipconfig/all.

Thanks in advance.

Mike

Answer:Modem/router function properly, but no internet

According to your ipconfig the wireless connection should be online and should be working.

If you want the wireless to work instead you will need to unplug the Ethernet cable because Windows can't use two connections at once and will tend to choose the wired connection if both are being used.

You may also need to go into the routers setting and make sure the wireless settings have the correct security and encryption. You should also go into the wireless profile for this connection in Windows and make sure the settings match the ones being used in your router.

2 more replies
Relevance 44.28%

Hello, i've lost the user manual for my router (Mercury KOB BR100). I dont think i set it up properly, and my internet disconnects quite alot, and i think its because of that. Can someone please help me?

If you need anymore information on my computers (theres 3), and other stuff just ask please.

Thanks
 

More replies
Relevance 44.28%

I have a cable modem for my computer. I also have a wireless router for my brother's laptop. Just yesterday, the internet was going haywire. It would work for 5 seconds and then the icon of the 2 computers on the bottom right of the task bar says Local Area Connection: A network cable is unplugged. It would continuously do that and i couldn't use the internet properly. I called Optimum Online to ask what was going on. They said it was a router problem. They said that something triggered the firewall in my router and that was causing the internet to go haywire. Ive tried resetting the router, ive tried turning everything off, and i tried a full computer virus scan. No viruses were found. After restarting everything, it still didnt work. The only way i can get the internet to work is if i only use the modem. The problem with that is that my brother cant get internet service on his laptop without the router. Does anyone know what i can do to fix the router problem? I dont know how to disable the firewall. I have a D-Link router. The model is Dl-614+. Thanks in advance.
 

Answer:My router is malfunctioning and I can't access the internet properly

uninstall the Firewall so that all you are using is the Windows Firewall. Check other security such as antispyware and antivirus stuff, particularly if free or cheap.
 

5 more replies
Relevance 44.28%

Hi

I cannot connect to the internet via my wireless connection.
I get an error about limited connectivity.

If I use an ethernet wire to cionnect to the modem the computer / internet works fine.

I have an Advent 9115 with windows vista.

when I call my internet provider they reset the router and I connected my Wii to test the connection. They now say it is a problem with my computer and cannot help.

Any suggestions?
 

Answer:Cannot connect wireless - Router working properly

Delete all the wireless profiles; then scan for networks and try to connect.
 

1 more replies
Relevance 44.28%

Hey! I was wondering if this RAm would fit in my PC:
http://cgi.ebay.co.uk/KINGSTON-1GB-...-DIMM-CL4_W0QQitemZ290317372527QQcmdZViewItem
(Scoll down and click Specifications for all the information on the RAM)

Here is my computer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00770214&cc=uk&lc=en&dlc=en&product=3264373

And the computer's motherboard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00714578&dlc=en&lc=en&cc=us

Thanks for any replies!
 

Answer:Will this RAM fit and work properly in my PC?

8 more replies
Relevance 44.28%

On my laptop I have a DVD CDRW combo drive (ie. I can watch DVDs and burn CDs). However the past three times I have tried to burn a music CD the buffer rate goes all the way down, then fixes itself, but shortly after completely fails and the burning process stops at 30%.

Variables:
>I have not changed the type of CD I use when burning since I have had the laptop.
>I have always used Nero burning software.
>I have installed new RAM recently.

Basically, I am wondering if there is anything I can do to fix this error. If it is the RAM that caused this (I'm pretty sure the errors started shortly after new RAM) will taking it out fix it? Should I try a new burning suite? If the problem is not fixable the laptop is still covered under a 12 month HP warranty and 3 year extended warranty so I can get it replaced or fixed but I would rather that be the last resort. Any help would be great, I don't know anything about hardware issues, etc.

Answer:DVD/CD-RW won't work properly

"(I'm pretty sure the errors started shortly after new RAM)"

well you found ur problem
try this
change back to the old ones, and try to burn, see if it works
if it works, ur new ram are not very compatiable

are the new rams same brand and PCXXXX as the old one?

7 more replies
Relevance 44.28%

My CD/DVD rom shows up in my device manager & states it is working properly.
Any disc that I put into the drive is not recognized. It pulls up zero info from the disc as if it can not read it. If I simply select play (even though no info is showing) I get the windows notice to add media to that drive.I thought the drive had died and I was ready to install a new one. BUT..
I ran the installed PC-Doctor program that is a HP diagnostic program and during that test, the drive played just fine. There are multiple test for the DVD/CD rom and it passed every test in the PC-Doctor program.
But after the test, I again placed different CD's , DVD's into it, and nothing.
 

Answer:DVD RW/CD Rom won't work properly

12 more replies
Relevance 44.28%

My "gamer" -PC has lost its connection to the rest of my LAN, WDlive, laptop.
The laptop can not "see" my "gamer" -PC more. And yet. Do I open a cmd in my "gamer" -PC and writes PING PHOTO PC (called my laptop), then the corresponding fine, but in the Windows network can not be seen, and I can not connect or network drive to it. Oddly enough, I have always had a network drive on "gamer" looking for PHOTO-PC, and this old connection still works fine, even though I reboot both computers
As I see it, so can the PCs well find each other in a CMD, but not in Windows Explorer or Total Commander. Both PCs are members of the same workgroup. I have been through all the settings in "Network and Sharing Center" and they are 110% identical (there are not corrected in them, since that time it worked).
Is there perhaps a service not running? Or a policy that has been changed?
The laptop and WDlive can see each other, and the laptop can easily see the wife's PC when she is on (it can "gamer" -PC'en no longer).

If I create entries in reg.databasen, it connects the network drive just fine after a reboot. See picture for examples of drive Y and Z. Both networking places are available as network drives, and in a CMD prompt with "PING PHOTO-PC" for example.
It is only in Windows Explorer that it can not find the names and / or network sites. Therefore, I believe that it is a service or a policy that has gone w... Read more

More replies
Relevance 44.28%

I have a laptop hp 15 ac 042 tu before one years ago. down keys is not work correctly, some times it press atomaticaly.

More replies
Relevance 44.28%

After installing windows 7 cpu fan won't run higher then 3125 rpm. So for the desktop applications it's ok but when i enter the game cpu temp. goes to 60 - 70 celsius. Before win 7 i had xp and it worked just fine.

So if anyone have any solution, please help.

Tnx!

Answer:CPU fan won't work properly

Turn off AMD cool and quiet.

6 more replies
Relevance 44.28%
Answer:cpu fan does not work properly

i get the message cpu fan does not work properly every time i try and install a new better cru cooler everytime i go back to my old one it works fine first i tried a heatpipe (coolermaster) and then i tried an artic copper silent and both gave me the same message what am i doing wrong??? i know how to put on thermal paste and ive been using artic silver any ideas???

10 more replies
Relevance 44.28%

IE & OE do not work properly. IE tabs slowly and hesitates and OE is slow to start. I tried the microsoft editing the reg fix from the 251787 article but no luck still have a problem. I tried everything that i know of, reintall windows 98 SE, IE 6.0 etc.. nothing corrects it. I even did the imagehlp.dll extraction and that didn't work either any ideas?

Mark
 

Answer:IE & OE do not work properly

9 more replies
Relevance 44.28%

Okay, i got dev c++ and i was following the tutorial and when i tried doing the hello world program it wouldn't start properly. heres my code

#include <stdio.h>
int main()
{
printf("Hello World\n");
reurn 0;
}
please note that i did compile and link it...
 

Answer:Dev c++ won't work properly.

return 0;
 

1 more replies
Relevance 44.28%

DDS (Ver_10-11-03.01) - NTFSx86
Run by Anne at 7:43:29.83 on Fri 11/05/2010
Internet Explorer: 8.0.6001.18975
Microsoft? Windows Vista? Home Basic 6.0.6002.2.1252.1.1033.18.1917.909 [GMT -5:00]

SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\system32\Ati2evxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\Ati2evxx.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\WLTRYSVC.EXE
C:\Windows\System32\bcmwltry.exe
C:\Windows\system32\WLANExt.exe
C:\Windows\System32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Windows\system32\dlcicoms.exe
C:\Windows\system32\svchost.exe -k NetworkServiceNetworkRestricted
C:\Windows\system32\svchost.exe -k imgsvc
C:\Windows\System32\svchost.exe -k WerSvcGrou... Read more

Answer:IE won't work properly

Hi all,
I am not sure how to post everything correctly, yes I read the instructions, but take a look at my screen name :-)

19 more replies
Relevance 44.28%

OS=WinXP Pro, 64-bit, installed on drive partition "D:\".

Have tried " sfc /scannow", following instructions online as follows:
1) copied folder I386 to "D:\"
2) Regedit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup>ServicePackSourcePath, where I changed location to "D:\".
3) Restarted computer, re-tried "sfc /scannow", after which still got "...need XP CD for more..."This was supposed to prevent the latter request for the CD, which didn't work for me anyway.
Will any of this work, specifically in XP 64-bit?
I need to check my system for errors: can you help to get sfc working for me?
Thanks in advance.
Art Miller

Answer:SFC won't work properly

Did you also change HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup - SourcePath to D:\?
And does the CD have the same service pack as is installed on the PC?

19 more replies
Relevance 44.28%

I have an old Dell PC with Windows2000. A few years ago I noticed that the it would not play cd's without skipping. I have had to use another computer for my ipod. A few months ago, the cd rom would no longer open so I just replaced it with a Pioneer DVR/DVD and it still skips while playing a cd! It also would not import to itunes. I was told my drivers could be bad but I am really lost while trying to find ones to update/ install. Please help!!!

Answer:My new cd rom does not work properly

 cluelessblond ..... Have you tried deleting your Pioneer optical drive and then rebooting the machine and have the drive be redetected .......? dl65  

14 more replies
Relevance 43.87%

i just had a very weird issue... i cannot connect the westell versalink to a wireless broadband router.. i did the basics (bridge, disable DHCP) but the westell is not giving IP address to the PC.. it did work when we just disable the wireless of the westell and connect the linksys, but thats not the standard way (very unstable).. how can i solve this without replacing the westell versalink with a modem?? help anyone?? please??
 

Answer:how can i make a modem/router work with a router??

14 more replies
Relevance 43.87%

Hello, posting here in the hopes that I can finally get this problem that has been going on for months fixed.

We have 2 computers in the home, one in the living room and one in my bedroom. Both of these up until recently ran on windows XP and the decision was made to upgrade to 7, which I'm starting to regret as I've had nothing but problems since doing so. But could be just me being an idiot and missing something completely obvious.

Anyway, since the upgrade I've had problems connecting to my wireless router via the PC in my bedroom. Every few days I have to rest my router to get it to connect. I keep getting the error 'Wireless Network Connection, does not have a valid IP configuration' and today I get told that there is a problem with my wireless adapter or access point. It will connect sometimes and keeps the connection for a dew days before coming up with the same error. I never had a problem connecting before the upgrade and anything else I try to connect to the router works completely fine.

The PC in the living room will not connect at all wirelessly but will via an Ethernet cable on windows 7. Seeing as this PCs hard drive is split, it also runs XP and will connect perfectly fine via the wireless when running XP. Not too concerned about this PC right now as we can get a steady connection Via the cable. But the PC in my bedroom is driving me mad.

Router: N300 wirless ADSL2+ Modem Router - Model: DGN 2200
Wireless Adapter: TP-LINK WN751ND
OS: 64bit ... Read more

Answer:Can't connect to wireless router properly after updating to Windows 7

Have you tried to update the firmware on this router? I only see two different firmware's showing up for this router but the latest one should work with Windows 7. The 1.0.0.36 is the latest version.

You should also set the router up to use WPA-2 security with AES encryption with Windows 7 drivers.

DGN2200v1

If the latest firmware doesn't improve the situation please post a screen shot of the ipconfig/all from the machine having the problems.

6 more replies
Relevance 43.87%

I have a Dell Inspiron 6400 that I bought in April 06 and I am having trouble getting the thing to work properly. It has been locked up since I last used Skype and will not run any programs like Skype, MediaPlayer or Limewire. Also, I cannot access the Internet at all and there are two popups that occur whenever I reboot the computer. One says, "Notification dll has not been registered program will not work properly." and "The application failed to initialized properly (0xc0000135). Click on OK to terminate the application."
Since the computer froze the Skype. Take a deep breath popup also occurs when I reboot as well as Windows Live Messenger. Any ideas? I have run anti-virus programs forever and they all come up with nothing. I am at the end of ability here.
 

Answer:Xp Sticks And Won't Work Properly

>> I have a Dell Inspiron 6400 that I bought in April 06 and I am having trouble getting the thing to work properly. slimbosansean <<

Hi Sean,

With all of these multiple problems you listed here and considering the fact that; according to your last post, you have had these problems for over a week and they have gotten only worse over time: My suggestion would be to back up all of your docs, picture, music, email settings, and files and then reformat and reinstall Windows XP.

I mean, if you think about this for a second: A reinstall of Windows will take only about a few hours or so; and with all of these problems you're experiencing (which could take weeks just to figure out what the problem actually is; much less fix it) you are better off doing the reinstall of Windows XP in my opinion.

If you do not have the Windows XP install disk you can get one from Dell support, either via their support site or by calling them. You can also call Dell directly at this number 1-800-WWW-DELL. Here are the three Dell Service Dept numbers as well (800)-820-8965 or (800)-624-9897 or (800)-627-1170. You can also try contacting Dell via this online tech support link.

Last year I bought a Dell 8400 (from eBay) which did not come with the Win XP Pro disk. Someone in another forum told me that Dell support would provide a Dell Win XP Reinstall (at either no cost or perhaps a small fee or shipping). All I had to do was to provide the express service code and prove th... Read more

1 more replies
Relevance 43.87%

Dear readers.

Just bod an Acer with Windows 7 Home Premium .
After running the Windows 7 install ( with all available updates downloaded) it looked perfect.
But then I found out that something was NOK


Problem description.

As example, I start up Skype ( it runs ok)
Now I want to quit the program ( not using the X, but terminate it)

I click on my Windows task bar and select Skype

Then I click my right mouse button and again a pop up menu appears (still ok) with several options for this program amongs them the desired option Quit
I select quit

Now the problem occurs:

When I click on the choosen option, a system file opens.
That?s it. ( its applicable for all options and the command opens always the same file)

Computer/Acer C:/windows/system32

This happens for all programs in the Start menu.
Nothing else happens, the system runs normal but the desired operation is not been performed.. I can quit the window with the sysyem file appearing . All looks fine but of course the program is still running


When I now really want to stop a program I need to go to taskmanager (by pressing CRL/ALT/DEL) to abort it.

Whats wrong with my Windows 7?
Started an SFC scan, no problems detected.

HELP please, thx.

Answer:TASKBAR doe not work properly

Can you post a screenshot of this?

zzz2496

3 more replies
Relevance 43.87%

For some reason on my two computers that run windows 10, I am not able to connect to ANY VPN server that is not hosted in the US, I am dumbfounded as pretty much I am the ONLY one with this problem and have no idea where to go for help. Mind you, on my phone all VPN'S work regardless of location. Also, I switch networks every week back and forth with the same problem on both networks, so I do not think it is a network issue? Anyways please help me in my struggles.

OS: windows 10
VPN used: VPN gate
 

More replies
Relevance 43.87%

Hi,

I'm having problems with the Tempo service.

I am not receiving ANY updates via this application (all settings of this application are correct, ie "full monitoring"). I know this because there are updates available online for my laptop via the toshiba driver site.

When I first installed Tempo, I received updates for about a month, then suddenly no updates came through. My firewall is not blocking this application either.

I have tried re-installing the application, but no change in the situation.

Does anyone know if ALL the updates that are available via the toshiba driver site come through to Tempo? Because, during the month that this service WAS working, I got a bios update, however I have recently seen a bios update online and Tempo still hasn't reported that it is available.

Any ideas on how to get Tempo to work properly?

Thanks.

Answer:Re: How to get Tempo to work properly?

I saw in your other thread that you have installed the SP1 on your Vista notebook.
Possibly there are some compatibility issues between the SP1 and the Tempo?

And yes? as far as I know Tempo reports all available updates!

3 more replies
Relevance 43.87%

For some reason, my LAN is not working for gaming. I CAN connect to the internet to play games online, like through Battle.net and Westwood Online (for Warcraft 3 and Renegade), but I cannot seem to play on Local Area Network with any of my games except for Half-Life: Counter-Strike 1.0 (NOT the steam version). I can also access the shared documents folders on my other computers, but the games will just not work unless it's Counter-Strike 1.0.

I have just recently manually uninstalled Windows OneCare Live after a virus removal(in accordance with the instructions from http://www.askdavetaylor.com/how_do_i_remove_windows_onecare.html), except for 2 folders inside called:
"C:\Program Files\Microsoft Windows OneCare Live\ClientSD" and
"C:\Program Files\Microsoft Windows OneCare Live\Database"
Inside the Database folder are six files, but I cannot access the Client SD folder. When I try to remove them, I get a message that says I cannot remove them due to write protection or current usage.

I'm pretty sure that Windows Live OneCare is the issue in not being able to play on LAN, since I could play games on LAN up until Windows OneCare Live's installation, but I am not getting any "This program is being blocked" notifications from OneCare or Windows firewall.

OS: Windows XP Professional, Version 2002, Service Pack 2
I also have both IPX and TCP/IP protocols installed on my machine, if that even matters.

Any help would be much apprecia... Read more

Answer:Question: How can I get my LAN to work properly?

After I searched around for a while, I came across this website called Major Geeks, and it provided me a tool that automatically removed the unremovable remnants of OneCare. Here is the URL to download the auto-uninstall tool:

Major Geeks OneCare removal utility

Special thanks to these guys that I searched for. Now my LAN games are running just like they were before I had OneCare.

NOTE: Be sure to unplug/disconnect yourself from the internet whilst you run the application, as Windows Firewall is temporarily deactivated, and you are prompted to restart the computer when the removal is finished.
 

1 more replies
Relevance 43.87%

I've downloaded an album in MP3 format from Amazon, and have burned it to a CD. I've done this successfully many times before, and I have a CD player that will play MP3 format music.But this time the CD refuses to behave normally. I've tried three times to create a useable one, but each time the player has had problems with it.First, the CD player clicks and stops and starts for maybe a minute or more. Then a track number appear in the display, but no sound is audible. Randomly, one or two tracks will play successfully, but then the next one won't. It all seems completely random and changes every time I try to play the CD.I run Windows 7. I'm using good-quality (TDK) disks, and I've tried burning with Windows Media Player and with CDBurnerXP - they give equally unsatisfactory results.The album plays completely normally on my MP3 player. Any ideas on why the CD version is a problem, please?

Answer:MP3 album won't work properly on a CD

Burn an Audio CD from whatever Media player you use on you PC.This will convert the MP3 to standard tracks.

5 more replies
Relevance 43.87%

Hey, for a new build i recently purchased an evga 7950 GX2.
i have yet to get it to work properly.

My system is:

Asus A8N SLI deluxe mobo
AMD Athlon 64 X2 4200+
2gigs DDR ram
600watt PS
DVD burner
80 & 160gb harddrives over 150gb free
Evga 7950 GX2

As far as i have been able to determine this should be able to work.
the problem: i can install the drivers and boot up my computer, the computer seems to be completly operational until i try to start up a game. When i try to start a game the computer freezes on a blank screen. the game i have tried that freeze are Half life 2 and other source based games, Everquest 2, and 3dmark03, all seem to freeze as soon as they try to load anything 3d, the menus will load, but it freezes when i try to start the game. for some reason i can get Oblivion to run.

when i turn the Nvidia "multi-gpu configuration" from "multi-gpu mode" to "multi-display" mode i can run all of these programs without a single problem.

i have updated my n-force4 chipset to the 6.86 version and updated the bios on my board to the ASUS 1016 bios version, with these settings nvidia's
website says that my motherboard should be compatible with the 7950 card. i have also tried this list of Drivers: 91.31, 91.33, 91.37, 91.45, 91.47, as well as the evga driver that came with the card. all have the same effect.

Is there a setting that i have missed? Could the card be bad? Has anyone else had a simi... Read more

Answer:Cannot get my 7950 gx2 to work properly

Try reposting this in "Audio and Video", and you'll get more replies.

No need - I moved it.
SNGX1275
 

2 more replies
Relevance 43.87%

Hello my new PC arrived today from Dell, and i have to say Microsoft.com wont load hotmail.co.uk wont load and MSN wont either, i have to say that msn Messenger i mean wont load on my @hotmail.co.uk but will on my net passport @ink4-u.

The websites will load in my AOL browser but not my IE!

I am having the same trobule on my other pc as well, but my laptop seems to be fine, any help? Cheers Jay

Answer:IE and MSN dont work properly

Will Firefox load them?

9 more replies
Relevance 43.87%

I've got a 10/100 wireless router, and a planning on getting a gigabit unmanaged switch connected to one of the router's ports. To the gigabit switch, I will have 2 PC's each with gigabit NIC's.

Will the 2 PC's connected via the switch have full gigabit transfer speed, or does the traffic need to go through the 10/100 router, introducing a bottleneck?
 

Answer:Will this configuration work properly?

They will get full gigabit connectivity, the only time you will traverse the router is when you want to be getting out to the internet.
 

2 more replies
Relevance 43.87%

VLC is fine, but why does Windows Media Player have problems? It always closes and says it encountered a problem playing the file. It only seems that .mkv files is the issue. Avi files etc, seem perfectly fine. Anyone else have same problems or a way of resolving the issue? Not that it's major, but still annoying!

Answer:.MKV files don't work properly with WMP?

VLC has buitin codec to play MKV. Wmp doesn't. To play MKV file with WMP, you'd need to install some third party Codecs such as:
Shark007: Windows 10 codecs - Windows 8.1 codecs - Windows 7 codecs or
Download K-Lite Mega Codec Pack 12.2.5

7 more replies
Relevance 43.87%

I had currently built a pc for the first time. It all went swell until my moniter displayed: "no signal". I had looked this up and I've tryed everything to prevent it.I had also an extra pair of eyes but they didn't know either. So, I came to the understanding that it might be the parts which might be the down side to this error. My Build:

Zotac 1060 3gb.
AMD Athlon X4-860k CPU, 4 cores, 3.7 - 4GHz.
Kingston HyperX 3k ssd 120gb.
Aerocool 80 plus 600w PSU.
GA-F2A68HM-HD2 gigabyte.
16GB 2x8GB DDR3

(Budget build for the time being)

All the wiring is done correctly and I don't know what I'm doing wrong. I've followed the manual redid some of the steps so I'm just thinking its one of parts but which one?
(I know the cpu is probably bottlenecking but I plan to upgrade it in the future.)

Thanks for reading.
 

Answer:Does my build work properly?

8 more replies
Relevance 43.87%

Hi im new to this so here i go...

I recently bought Farcry (the first one) for my vista laptop, it says on the box that its vista compatible.
But whenever i boot it up i get a black screen for 5 mins until it eventually works, then every time it loads (at beginning of level or when i die) i have to wait 3 mins for it to start to load and then 2 mins after its loaded.
This is very irritating, boring etc and is spoiling the game for me. I am very sure i have the lastest drivers and i definetly have the 1.4 patch for Farcry... i really dont know what to do.
Any help would be greatly appreciated.

System info:
Windows Vista 32 bit
Model: HP Pavillion dv9700 Notebook PC
Graphics Card: Nvidia Geforce 8400M GS
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-60 2.00 GHz
RAM: 2GB
 

Answer:Getting Farcry to work properly

7 more replies
Relevance 43.87%

I'm using Win 7 64 bit, IE 9 and Chrome. Recently downloaded JAVA 7 update 45. Didn't work on either browser including 32 bit version of IE.

Deleted all Java through Control Panel, used Revo to get rid of leftover files. Used offline Java installer to install both 32 and 64 bit versions. Used Java control panel to delete temporary files. Java still not being detected/working properly. Don't know what else to do. Does anyone have any suggestions?

Thanks, JTU
 

Answer:Can't get JAVA to work properly

What are you specifically trying to view with Java?
 

6 more replies
Relevance 43.87%

My CD ROM does not work properly because of corrupted drivers. I have tried uninstalling etc. How do you load new drivers or even reformat from the recovery disc when the CD ROM drive won't work?

Seems like catch 22. Anyone help?

Answer:Satellite A30 - CD-ROM does not work properly

If it is really a problem with the drivers for your CD-Rom, you can recover it.

Because you need to boot your Notebook with the Recovery CD/DVD.
This has nothing to do with missing drivers in the Windows Operating System.

And if you can not boot with the Recovery Disc, I would say your Disc drive is broken.

2 more replies
Relevance 43.87%

After Microsoft automatically changed my Hotmail to Outlook, I started to have problems. When I click "Contact Us" on a commercial website, it states "Sorry, there seems to be a problem with Hotmail right now". I've tried numerous corrective solutions (including switching back to Hotmail), but nothing works. When someone sends me a pic and then I forward it to another party, the pic shows up blank on the recipient's email. I'm using Internet Explorer 8. HELP??Wellgo

Answer:Hotmail won't work properly

Hi,I would suggest you to try another browser like chrome, Firefox etc. and check if the issue occurs on this browser or not.Thanks & RegardsDebbie B#iworkfordell

4 more replies
Relevance 43.87%

HI: i have an old laptop using versus. It has a problem turning on the WI-FI. iT WORKS IN SAFE MODE ONLY. iT IS A SONY. It will not connect.
 

Answer:Solved: wi-Fi does not work properly

old laptop using versusClick to expand...

not sure - what is versus
 

3 more replies
Relevance 43.87%

Hi,

Im having "issues" with playing DVD's and CD's on the internal DVD/CD drive on my Equium M50-192
While playing DVD's the images stutter and the audio is very slightly out of sync with the video. When playing CD's, they play slow.

Have tried various players (Nero, Intervideo etc) and all seem the same.
Have also tried an external drive and this seems to solve the problem for 99% of the time with DVD's (still get the occasional stutter) and CD's play OK.

Has anybody got any ideas?

Thanks.

Answer:ODD on Equium M50 does not work properly

Hi there,

it sounds like your ODD has a hardware problem which needs to be fixed by an toshiba technician which means you must bring your machine to an authorized service partner.

So I suggest you to visit the following link:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

Pick your ASP which is the nearest in your region and then let them do the rest.

Greets

1 more replies
Relevance 43.87%

After Microsoft automatically changed my Hotmail to Outlook, I started to have problems. When I click "Contact Us" on a commercial website, it states "Sorry, there seems to be a problem with Hotmail right now". I've tried numerous corrective solutions (including switching back to Hotmail), but nothing works. When someone sends me a pic and then I forward it to another party, the pic shows up blank on the recipient's email. I'm using Internet Explorer 8. HELP??

Answer:Hotmail will not work properly

Clear IE 8's Browser Cache: How to Clear Your Browser's Cache (with screenshots) - wikiHow

3 more replies
Relevance 43.87%

Well I only noticed this now, when I tried burning the Windows 10 ISO on a DVD. The setup doesn't work, it returns an error. I also tried using Alcohol 120% to burn the image but it also fails with an error. I had a rewritable DVD lying around so I put it on my laptop, tried erasing it but that also fails.

Basically the only thing I can do with the laptops DVD-Rom/burner is reading CDs/DVDs and nothing else. This didn't happen before? I'm really bummed, as I don't know what could be causing this issue. Any help is greatly appreciated!

More replies
Relevance 43.87%

For a couple of days I cannot open messages anymore, either send messages.
Opening the messages: The "hand" comes out but the opening does not take place.
Sending messages: I can open the NEW tag but noway to put an address.

However emails continue to arrive as usual but of course they are piling up as I cannot,
open them.
Anyone can help fix that ?
Thanks a lot.

More replies
Relevance 43.87%

This is an ATAPI iHAP122W and my PC is a Dimension 3100C and Windows XP.
I have put a new DVD driver.
My PC is in the floor vertical and when I want to put in or out a disc, the drive moves the fast for me to put it in or take out.
If put the PC horizontal, it works OK.
Johngibb
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 4 Stepping 9
Processor Count: 2
RAM: 2038 Mb
Graphics Card: Intel(R) 82915G/GV/910GL Express Chipset Family, 128 Mb
Hard Drives: C: Total - 53968 MB, Free - 14543 MB; D: Total - 19045 MB, Free - 18980 MB; F: Total - 238475 MB, Free - 200110 MB;
Motherboard: Dell Inc. , 0DD332, , ..CN7082166D005I.
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
 

Answer:DVD Drive will not work properly.

6 more replies
Relevance 43.87%

Hi everyone,

I am facing some small problem with my built-in web cam. I am using Acer Aspire 5520. My web cam have function of video conference and take pictures manualy by clicking in webcam application. However I just found out recently it didn't work as it should, the application to take manual pics just couldnt load up the web cam, it showed black screen.While in the other hand if I am using it for video conference, it works perfectly.

Any idea how to fix this problem up? I've updated my webcam driver but still no help at all, thank you guys
 

More replies
Relevance 43.87%

i am using a pair of tsunmi speakers, i can hear sound when i dial up, but got no sound on anything else anyone got any suggestions please
 

Answer:my sound does not work properly

Hello, and welcome to techspot!

We need to know a bit more about your computer. Please fill in as much info as you know in your "profile".

A couple of questions:

1. How long have you had the computer?
2. Did it EVER have sound?

The problem is likely one of two things.

1. You have the volume on mute in your sound settings
2. You don't have the drivers installed.

Do you know how to check to see if it is problem #1?
 

1 more replies
Relevance 43.87%

Hello, when i make a testcall to Skype i hear my voice back, works as it should.. but when i call a real person they do not hear me.It works perfect on my PC with the exact same setup and headset, I have also tried with just the speakers and mic on Chromebook but that does not work either, any suggestions anyone?? 

More replies
Relevance 43.87%

Well I only noticed this now, when I tried burning the Windows 10 ISO on a DVD. The setup doesn't work, it returns an error. I also tried using Alcohol 120% to burn the image but it also fails with an error. I had a rewritable DVD lying around so I put it on my laptop, tried erasing it but that also fails.

Basically the only thing I can do with the laptops DVD-Rom/burner is reading CDs/DVDs and nothing else. This didn't happen before? I'm really bummed, as I don't know what could be causing this issue. Any help is greatly appreciated!

More replies
Relevance 43.87%

Hi, after a few minutes of usage, or moving the PC while running. Causes the screen to go black with dottes of colour on..

After that the comp. either shutsdown, and the little lights that shows if the PC gets power starts to blink.
Allthough, i removed the battery and im using only the power from the adapter. And then it works fine, but that means i cant move the pc, or it will shut down.
Do i need a new battery? And if i do, where do i get it?

If anyone has had the same problem as me, how did you solve it? (im from sweden btw)

Thank you, (sorry for the bad english><)

Answer:Qosmio F20 does not work properly

Hi there,

it sounds strange, I never heard that a battery would be the cause for such error. Maybe it would be interesting if you can reproduce the
error when attaching the battery back to the machine. If the error appears again, try first to update the bios to the newest available and
if the error persists, bring your machine to a local service partner.

I think maybe it?s a hardware-related problem, but I cannot tell you securely if yes or not.

If you need really a servicepartner, then follow this link to find the nearest available in your country:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?subs=tais

Cheers

2 more replies
Relevance 43.87%

 My device's fingerprint doesn't work properly with windows 10.Please give me a sollution.

More replies
Relevance 43.87%

Hey, So I updated the Y510P to windoes 8.1 (Most regretted thing I've done with this laptop, that includes doing a battery reset.)  As many people have found out there are issues with 8.1 and SLI. I used the recomended BIOS update, and that seemed to fix the issue.  Unfortunatly, for some reason I'm not sure about, the 750M does not seem to be working right. Before the windows 8.1, and after updating the BIOS, League of Legens ran at the 60 FPS capped at max settings.  After the 8.1 and now, LoL will run around 10-15 FPS at max settings, and only 25 FPS at the lowest graphics settings.  I'm not sure why the laptop's performance has dropped.  I'm also getting major lag in Path of Exiles, where I used to have no issues playing it.  As I mentioned, I have used the BIOS update, and it did fix the issue I had with 8.1  I've specified that the laptop use the 750M as the default graphics GPU, and in the GPU monitor, the games show up and using it.  But as I've stated, their performance is at par with using the integrated  Intell graphics card.  Any thoughts or suggestions of what I can try to fix this issue would be greatly appreaciated. Sincerly,Jinotad.

More replies
Relevance 43.87%

I have bought a skylake desktop,everything works fine.
I installed as dual boot windows 7,(to play games that 10 will not)
win 7 installs well, but it will not see ethernet, and all my usb sockets
will not work when I plug in a key drive.
in control panel I enabled everthing in autoplay, still did not work.
I installed a different win 7 disc, got the same result

Answer:windows 7 will not work properly

you will need to load usb drivers and network drivers in windows 7

3 more replies
Relevance 43.87%

Hello everyone.

My name is George Sebros and I owe a Toshiba Satellite A300.
The reason why I am posting this new thread is that I need a little help from anyone who knows something about my problem above:
One day, about 2 months ago... I turn on my Satellite A300.
When it logged in, not only none of my icons appeared but also the start menu didn't....
The only thing that appeared in a totally BLACK screen, was my "Documents and Settings" folder which was opened automatically.
There was no way I could find neither the Start menu (I mean the task bar) nor my icons...
So, everytime I closed the Documents and Settings folder that was appeared, the only thing I could see was a black screen....
It was a kind of shock for me and I could not believe in my eyes...

After a few days, I tried the well-known combination "Ctrl+Alt+Del" in order to see what was working and what was not.
Then, I pressed the "FILE" and then "NEW TASK" and finally, I typed the word "explorer" in it.
That was it!! Suddenly, everything turn to normal as like the day before the problem begun. I was happy because with this way, I was able to use my Satellite A300 again!
However, this is an indirect way to make my PC work!
That means that I am still fain to use that indirect way to make the icons and the taskbar appear.
Does it mean that the "explorer.exe" is not working ?
A lot of registry programs I use, notify me about some HKY... Read more

Answer:Explorer.exe does not work properly.

Hi

Seems your Vista is muddled up?
You could try to clean the OS and the registry in order to avoid new OS installation.
Please use the CCLeaner.

I use this tool as well? it free and it cleans the registry and other temporally files.
It helps really!

But if the OS will still not work as it should then you should try a new installation?
Of course this procedure is drastically because the HDD would be formatted but at the other hand you will get a clean and fully functional OS

1 more replies
Relevance 43.87%

Cpu : AMD FX-6300 Box
gpu : Gigabyte GeForce GTX960 4GB WindForce 2X OC
MotherBoard : Ga-970a-ds3p
pcu: Corsair VS Series VS550 80Plus
Hard Drive : Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal
Ram : HyperX Fury White 8GB DDR3-1333MHz
Case : BitFenix / BitFenix Nova window

More replies
Relevance 43.87%

My friend has a sony vaio desktop pc which he bought like 2 years ago. The problem is the DVDRW.

It reads original Audio/Video CDs, ORIGINAL DVDs, CD-Rs. But it won't read DVD-Rs. I thought the problem could be the laser beam. Since its 2 years old and used really efficiently, laser beam might be losing its strength?

What other problems could it be? We've formatted hdd and installed windows xp again but it didn't help.

Since its under warranty, should he take it to sony? will they change dvdrw just because its not reading DVD-Rs? Should he try to break it down completely somehow before he takes it to sony?

Any suggestions, ideas, opinions are welcome!

Thanx,
 

Answer:DVDRW Don't Work Properly

Did it read DVD-r's before? what DVD-R's have your tried? ( brand) also what DVD burning software is installed on the machine?

taking the burner apart will void the warranty.
 

5 more replies
Relevance 43.87%

I recently installed a new 60GB SSD to handle gaming better, and I kept my old HDD for storage. To handle transferring my OS to it I used a program called "Migrate OS to SSD". When I did the transfer I only moved my Windows directory, and now when I start up I get an error message saying my user account was not loaded properly. I also cannot get any of my internet browsers to connect to the internet either. The only reason I added this SSD was for gaming. I am to the point where I am thinking it might be easier just to wipe both hard drives and re-install windows onto the SSD. Also, some of the programs that were left on the old HD are not working now, but I don't know if it is because I do not have admin rights or not because my profile won't load. Thanks for any help.

Answer:Trying to get OS migration to work properly

Hi,

Is the SSD too small for a complete clone of the system?

If not, clone the old drive onto the SSD, when that is up & running, wipe the old drive & use it for storage.

Else you need to start again with the system & use extra space & install your programs to a storage drive (Old one or another). OK?

1 more replies
Relevance 43.87%

i am running asus k40ij laptop wth operating system win 7.but cananot use the webcame properly though life frame2 camera is installed from the driver cd.when i turn on the webcam it shows me horrizonally. my head shows bellow.

Answer:webcam does not work properly

I think this is a problem with your computer itself. Contact ASUS.

1 more replies
Relevance 43.87%

I am a hold off and planned to keep Windows 7 to EOL in 2020. I recently did a Windows 7 to 10 upgrade for a friend and was so delighted with it that I now updated my own system to Windows 10. Very smooth install, update a few drivers and some programs, but working very well. Except for Mail.

What kind of joke is this Windows 7 Mail? It has to be the prettiest mail client I ever used, and the most inept and useless one at that. I install my AT&T email accounts and they configure nicely, but some never sync. I send myself some test mails, they never arrive but do arrive on my Android phone. There is no contact list, but typing a few bits into the To: line offers contact suggestions. This AT&T account I use most for friends and when I get, say, 2 emails and read them, they are gone! I must have hundreds or thousands of old emails, yet NONE show on Win10 email. Nothing to see. I used my Live 2012 server settings for win10 mail, did not work, says outdated settings. One hour later, "Not synced yet". Blue dots moving, no significant data downloading. No way to use with One Drive so I imagine sending 6 full size high res images will be a thing of the past. The gmail account synced well, I have mail going back to 2011 in that folder. My GoDaddy domain name email is working and showing past mail.

I will send a test mail from AT&T account to yahoo account to see if I can even send mail. Syncing, up to date, message present. Yahoo inbox somewhat full but I neve... Read more

Answer:Win 10 Mail, does any of it work properly?

Thunderbird. I went independent of MS after they swapped from Outlook Express to Win Mail then took that away (some of that is STILL there in Win 10!). MS wanted to play 'now you see it, now you don't' with email clients, and I just didn't want to play any more.

Too tiresome working out how to move their randomly distributed email client data around.

4 more replies
Relevance 43.87%

VLC is fine, but why does Windows Media Player have problems? It always closes and says it encountered a problem playing the file. It only seems that .mkv files is the issue. Avi files etc, seem perfectly fine. Anyone else have same problems or a way of resolving the issue? Not that it's major, but still annoying!

Answer:.MKV files don't work properly with WMP?

VLC has buitin codec to play MKV. Wmp doesn't. To play MKV file with WMP, you'd need to install some third party Codecs such as:
Shark007: Windows 10 codecs - Windows 8.1 codecs - Windows 7 codecs or
Download K-Lite Mega Codec Pack 12.2.5

7 more replies
Relevance 43.87%

hiii have installed all drivers properly in my notebook from the hp site.But the 3.5 audio jack supposed to make trouble as though the port connect to the  headfone or audio system,the laptop speakers also sounds up.....pl provide me a sloution 

Answer:3.5 jack does not work properly

Hi @iarijit, Welcome to the HP Forum! Thank you for becoming a HP Forum member. It is a dynamite location to get help from the community, get suggestions and find what has worked for others. For you have the best experience, here is a link for you to review, should you have any concerns: First Time Here? Learn How to Post and More I grasp that you have updated all the drivers in your notebook, but when you connect a headset/ headphones you hear sound from the laptop speakers also. Have you run the HP Support Assistant to aid with any HP updates? Here is a link to HP Notebook PCs - Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 that should help to alleviate this issue. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for. Also, clicking the ?Thumbs Up? below is a great way to say thanks!

1 more replies
Relevance 43.87%

Hi, I've made a bit of a mess of my computer and now don't know what to do. It won't start up properly at all now. It's a Packard Bell, about 1 1/2 years old, operating on Vista Basic.
Basically, I downloaded a film that I think was dodgy and now it's caused me all sorts of problems and I'm worried I may have lost everything on my hard drive. After I realised the film was no good, I deleted it and thought I better run a quick virus scan, just in case. I use AVG for this. I started the scan and walked away but a minute or two later I heard the pc 'pip' as if it was turning itself back on. Then I got the black and white screen and just two options ; 'Start Windows Normally' and 'Start Windows Recovery'. I tried to start normally but after the splash screen, the screen just stays black and nothing happens. Then I turned off/on and tried the 'Windows Recovery' option. From the menu within this option, I took the ioption to go back to a restore point, which involved several scans to fix any problems first (which lasted about 45 mins). The scans said that they could find nothing wrong with the system but it still wouldn't start from the last restore point. I also tried other options in this menu, such as letting the Windows recover try to fix files etc. but still no good. When I start the computer, I still just get the two options, both of which seem a bit futile now.
Is it worth trying to start the system in Safe Mode (even though at the moment it's not giving me ... Read more

Answer:Can't get my computer to work properly - Help!

You'll have to see if the data still exists on the drive before doing anything else.
There's several ways to do this, the easiest way is to access it by the Command Prompt option in the Startup Repair menu (which I think that you're getting to).

If the data is still intact, you'll have to take measures to recover the data before proceeding. Let us know if the data is there and we'll work from that.

2 more replies
Relevance 43.87%

i may have deleted some windows programmes and downloaded a virus as i cant get my taskbar to work

DDS (Ver_09-02-01.01) - NTFSx86
Run by User at 4:09:08.47 on 25/02/2009
Internet Explorer: 7.0.5730.13
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.511.88 [GMT 0:00]

AV: avast! antivirus 4.8.1296 [VPS 090223-0] *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\WINDOWS\System32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorsvw.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\system32\lxducoms.exe
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program Files\Alwil Software\Avast4\ashWebSv.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\WINDOWS\vsnp2uvc.exe
C:\Program Files\IObit\Advanced SystemCare 3\AWC.exe
C:\Program Files\Yahoo!\Messenger\YahooMessenger.exe
C:\Progr... Read more

Answer:cant get taskbar to work properly

Welcome to the BleepingComputer Forums. Since it has been a few days since you scanned your computer with HijackThis, we will need a new HijackThis log. If you have not already downloaded Random's System Information Tool (RSIT), please download Random's System Information Tool (RSIT) by random/random which includes a HijackThis log and save it to your desktop. If you have RSIT already on your computer, please run it again. Double click on RSIT.exe to run RSIT. Click Continue at the disclaimer screen. Please post the contents of log.txt. Thank you for your patience.Please see Preparation Guide for use before posting about your potential Malware problem. If you have already posted this log at another forum or if you decide to seek help at another forum, please let us know. There is a shortage of helpers and taking the time of two volunteer helpers means that someone else may not be helped. Please post your HijackThis log as a reply to this thread and not as an attachment. I am always leery of opening attachments so I always request that HijackThis logs are to be posted as a reply to the thread. I do not think that you are attaching anything scary but others may do so. While we are working on your HijackThis log, please: Reply to this thread; do not start another! Do not make any changes on your computer during the cleaning process or download/add programs on your computer unless instructed to do so. Do not run any other tool until instruc... Read more

2 more replies
Relevance 43.87%

July 5, 2004

System:
AMD Athlon 3200XP+ (2.2GHz - Barton)
ASUS A7N8X-E Deluxe Motherboard
- 400MHz FSB
- nForce2 chipset
- Dual DDR 400
Corsair TwinX1024-3200C2PT RAM (2x512)
PNY GeForce FX 5900 AGP (128MB DDR)
Creative SoundBlaster Audigy 2ZS
(2) 80GB Maxtor SATA drives (Raid 0)
Mitsumi 1.44 floppy drive
Sony DWU18A DVD +/- RW 8X
Microsoft Keyboard and IR Mouse
Antec 1080AMG w/420 watt true pwr supply
Windows XP Professional w/ SP1

Patches:
ASUS BIOS 1011
Current nVidia nVidia GForce2 driver (WHQL)
nVidia graphics driver 53.03
MS DirectX 9.0b

Problem:
Originally I had an ATI Radeon AIW 9800 Pro graphics card installed. Windows Desktop viewing and television viewing worked fine; however when running MS Flight Simulator 2004 or Rainbow Six
games the system would crash. Either a bluescreen or just exiting back to the desktop. Sometimes it would note there was a serious error and it wanted to send a report to Microsoft. PC is not
connected yet so I've never sent a report.

Replaced the ATI graphics card with a PNY GeForce FX 5900 and completely rebuilt the OS. Again Windows Desktop viewing was okay, however MS Flightsim 2004 and Comanche 4 games would run for about a minute and then crash giving either a bluescreen or error report.

Troubleshooting:
I have removed the SoundBlaster card using instead the onboard audio, and then rebuilt everything - still have same problems. Also I've tried either RAM stick by itself to no avail.

A local PC shop performed diagnosi... Read more

Answer:Videocard won't work properly

9 more replies
Relevance 43.87%

I am a hold off and planned to keep Windows 7 to EOL in 2020. I recently did a Windows 7 to 10 upgrade for a friend and was so delighted with it that I now updated my own system to Windows 10. Very smooth install, update a few drivers and some programs, but working very well. Except for Mail.

What kind of joke is this Windows 7 Mail? It has to be the prettiest mail client I ever used, and the most inept and useless one at that. I install my AT&T email accounts and they configure nicely, but some never sync. I send myself some test mails, they never arrive but do arrive on my Android phone. There is no contact list, but typing a few bits into the To: line offers contact suggestions. This AT&T account I use most for friends and when I get, say, 2 emails and read them, they are gone! I must have hundreds or thousands of old emails, yet NONE show on Win10 email. Nothing to see. I used my Live 2012 server settings for win10 mail, did not work, says outdated settings. One hour later, "Not synced yet". Blue dots moving, no significant data downloading. No way to use with One Drive so I imagine sending 6 full size high res images will be a thing of the past. The gmail account synced well, I have mail going back to 2011 in that folder. My GoDaddy domain name email is working and showing past mail.

I will send a test mail from AT&T account to yahoo account to see if I can even send mail. Syncing, up to date, message present. Yahoo inbox somewhat full but I neve... Read more

Answer:Win 10 Mail, does any of it work properly?

Thunderbird. I went independent of MS after they swapped from Outlook Express to Win Mail then took that away (some of that is STILL there in Win 10!). MS wanted to play 'now you see it, now you don't' with email clients, and I just didn't want to play any more.

Too tiresome working out how to move their randomly distributed email client data around.

1 more replies
Relevance 43.87%

Hi folks
I recently placed an advert in the paper for my small business, and when someone clicks on the advert, it should bring up a box where readers can email me for more information.
However, I have tried this out myself, and when I click on the advert, a box appears on the screen, and on top of the box it says ‘enter your user name and pass word for the following server’. Underneath, in the same box, there is a sub heading saying
Server: smtp.mail.yahoo.co.uk. Underneath in the same box, the user name heading appears and my first name automatically is filled in there with a password. (about half a dozen asterisks).
No matter how many times I press the ok button in that box, the box reappears and does not go away. While all this is happening, there appears a larger box in the background which would enable readers to email me there queries for more information etc.
So, at the moment, I am totally confused with why this is happening. More importantly, does that mean I would not be able to accept emails from readers?
By the way, my inbox does except ‘normal’ emails from other users.
Thanks in advance for your response.

Answer:How can I get my emails to work properly?

Difficult to answer without knowing what the "paper" is that you've placed the advert in and the format of the ad. Normally, a link to send an email takes the form...
mailto:[email protected]
...and clicking on it opens a new message window in the user's email program.

1 more replies
Relevance 43.87%

Hello all :) About 3 months ago I downloaded a RC to try W7 out and I had a problem with MSN, which froze for about 2 seconds whenever I tried to open up a conversation with someone.. I just went back to Vista thinking that this would be fixed in the final version of W7.

But I bought it last week.. installed everything and now I'm having the same problem again. It's just annoying and stupid because I dont get how MSN works slow on a high end PC. Anyway, I had Eset Smart Security installed, I unistalled it and went back to my old version of Nod32 Antivirus, and this seemed to fix the problem somehow for most of the day. Late at night it happened again. I have to close MSN and re open it to fix it for a while it seems..

I'm running a 64 bit OS by the way. Any help is appreciated :(

More replies
Relevance 43.87%

Hey Guys

My laptop decided to stop working today :(.

It wont go further then the XP Bootscreen, it just freezes there.
I can get in with safe mode and everything looks fine.
So I reinstalled my OS but I got no luck.

I have updated my Bios but still no luck .

What can it be? I have never seen anthing like this before.

Thanks for your help

Michael

Answer:Qosmio F20-137 would not work properly

Hi,

so, check your RAM with the help of Memtest86, because this sounds like a hardware issue. Or maybe it will better to download a knoppix-live-cd from the internet and try it with this one.
I don?t want to say that you have a hardware failure, you can test it, if you just remove one of your memory modules or exchange the harddisk, to check if one of these components is faulty and causes
the "freeze" of your machine.

If you encounter after all that checks the same problem, then you only the choice to bring your machine to a authorized service partner or your dealer, they have to check your machine then on hardware failures.

Good luck

Greets

2 more replies
Relevance 43.46%

My problem is very similar to the problem in this post. http://forums.techguy.org/networking/689920-host-names-netgear-router.html. I have had a heck of a time getting this server up and running and it looks like I finally have it, except for one thing. Everything works except for the vpn. I do not have the vpn portion on the router configured since the SBS server will be acting as the vpn host, but maybe I need to configure the vpn elements on this router for it to allow vpn connections in?

The other thing that is "off" as the title of this post indicates is that the server is not showing up on the router's attached devices under the correct name. It's showing as some generic WIN-****** name.

I am doing this project for a non-profit without compensation and the networking part of it has been a nightmare. So I'm really hoping that someone has a solution that doesn't entail me reconfiguring the server. Everything else appears to be functioning properly, dhcp, dns, ingoing, outgoing mail and the web interface.

Any thoughts would be appreciated!
Thanks,
Mary.
 

Answer:SBS 2011 Server not showing up properly on Netgear VPN 318v3 router

7 more replies
Relevance 43.05%

I have used a web site, an ils website, to communicate with others. On that site, you click the name, or 'call' button, and it calls the party with netmeeting. I have an intel PC Pro camera, and loaded an update of the intel software for the camera for Windows XP. When I did, it became the default video software, and the site no longer worked as it did. I removed the intel software and now when I hit that 'call' button I get the following pop-up:

"This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel."
When I hit the ok button, I get another that says: "Internet Explorer cannot open this helper application for callto:ils (etc). The protocol specified in this address is not valid. Make sure the address is correct and try again."

Two questoins...1. Can I create an association as it says? or 2. How can I remove netmeeting from my computer and then download it again? This is a Dell 8400 Pentium 4 with Windows XP Pro, and I don't see anything on the netmeeting website to download to XP.

Help!

Thanks!!!
 

Answer:Netmeeting doesn't work properly

right click on one of the files ( you may need to hold the shift key or control key at the same time ) to get an openwith menu option

customise

then a box will come up with all the programs
find the dega program in the list
then click always use this program box

http://www.baxbex.com/products.html
software called openexpert

netmeeting download
http://www.microsoft.com/downloads/...7c-f778-4422-a6f4-efb8abba021e&DisplayLang=en
I have version 3.01 on my XP PC
 

1 more replies
Relevance 43.05%

Hi!
I'm about to prepare some OEM computers and have made a simple unattend.xml-file with help from the answering file sample from WAIK, but I can't get it to work properly.

I have copied the file to the root directory of an USB drive and it seemes like the installation program is reading the file (e.g. I don't have to specify an computer name when finalizing the installation) but it's not as automated that I would like it to be. I have to choose wich Windows version to install (basic, HP etc.), the disk partitions listed in the xml-file is not automated (I have to choose wich drive to use for installation), I need to confirm the license agreement, choose date and time options.

What can be wrong? I would like a clean, working autounattend.xml-file that automatically installs and also temporarily activates the administrator account so I can install updates, drivers and such and then seal everything up with sysprep.

Can anyone help me with this?
Here's my autounattend.xml file (I've deleted the OEM info):

autounattend.xml

//Henrik

Answer:Autounattend.xml doesn't work properly

Hi HITData, welcome to the forums, Have a look at this Windows 7 doesn&#39;t detect autounattend.xml? It may help you

9 more replies
Relevance 43.05%

My friend thought he'd do me the favor of setting up my new ideacentre k-450 for me....I ended up using the recovery option...Can not enable Pokki and Lenovo Solution Center toolbars;When I first boot the pc I am taken to Start, but after almost a minute I am switched to the desktop  (properities>navigation>  When I sign in...destop instead of Start    IS   NOT   ticked )Lenovo Support app> tips & tricks can not detect my system - is this normal?  Is there any way to get recovery discs for this pc? TIA,Diane

More replies
Relevance 43.05%

Dear, I purchase a new laptop model number is 15-r036tu I got this laptop with window 8.1 after using few month I did not fill comfortable with this 8.1 I DID DOWN grade from 8.1 to window 7 (32 bit) now my all software are missing but I am able to download my all software BUT MY MOUSE DOUBLE CLICK IT DOES NOT WORK. HP management and right click but is unable to update driver please give me any advice or link to how to download software. Thanks Og2

More replies
Relevance 43.05%

Trying to install HP Photosmart to operate with my Dell desktop and Windows XP Home version.
I used the CD to install the program and it will make any document I open print.

BUT... when I click on the desktop icon I can't get the program to scan a new document through the printer, as it should.

Can someone help me???

Thanks,
1es00m
 

More replies
Relevance 43.05%

I have occured a problem recently with my scroller wheel located in the middle of my mouse. It seems as if something has hijacked the mouse scroller when I am browsing within IE 6. Whenver I scroll down a page with the mouse scroller, it takes me back to previous web pages I have already explored, instead of doing its job and scrolling down the page. It never did that till recently. I have always been able to scroll down pages in IE with no problem. I have also gone to my control panel/mouse options/wheel and it was checked as "scrolling 3 lines at a time".Could this be a hijacker virus or something else??
 

Answer:Mouse wheel will not work properly

7 more replies
Relevance 43.05%

Hi all!I wonder if you sages could help this old chap? I've been having a bit of trouble with my PC of late and yesterday, I obviously deleted something i shouldn't of done and when restarting the computer froze and i couldn't do anything about it!Anyway, In my old, but dumb, wisdom, decided to repair XP on my fujitsu computer using the disk supplied with it.Well, the computer is working ok, but obviously needs to update itself.But, i can get it to connect to the internet but it jumps out within a second or two!I am using a Belkinwireless G usb network adaptor as usual.and it is working as it should, but the computer seems to be rejecting connection.Is there any advise you sages could give me?Rusty

Answer:Repaired xp now internet won't work properly

System restore to a time before you "obviously deleted something"?

8 more replies
Relevance 43.05%

Having issues when typing characters are not coming out as typed or missing

Example
This is an eampe owhat shappnng when I am tying

Answer:Equium L20 - 197: Keyboard does not work properly

I think, the only solution would be to send your machine to an authorized service partner for a hardware checkup, since such errors are rather hardware- then software-related. You can also try if you have the same error when using a external keyboard.

But nowadays: you should bring your machine to an ASP and let them check your machine on possible hardware faults.
Check the following link to find the nearest available Authorized Service Partner in your country:

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

Greets

3 more replies
Relevance 43.05%

My Bluetooth keyboard stopped working with just one specific laptop. (acer aspire E5-771G-76QZ)Laptop says it is paired but my keyboard his Bluetooth light lights up when pressing a button (this means it's not connected to anything).so I tried the keyboard on other devices (laptop, desktop, phone) and it works just fine.When trying to delete the keyboard from the paired devices, it "installs" it self when restarting the laptop, I even deleted my Bluetooth drivers and deleted all the files with iobit uninstaller, after restarting my laptop, Bluetooth was installed by it self again and the keyboard was "paired".ps. I can pair my phone or other Bluetooth devices without any problem with this laptop, so it looks like it's a quarrel between the laptop and the Bluetooth keyboard.

More replies
Relevance 43.05%

I'm a new user of VOIP. My network connect is Cable modem -> router (Dir 615) -> ATA (SPA122) .
Outbound calls have no problem. But inbound calls sometimes work, sometimes not ( got message: not in service)
Anyone can help?
 

Answer:inbound calls do not work properly

Tried reversing the routers?
 

1 more replies
Relevance 43.05%

Hi
I've just bought a second-hand Equium A60. The seller reformatted the laptop using the drive. However, the drive will not play any disc now (tried CD,DVD and Toshiba support discs. Device manager says the drive is working but the programme tells me to insert a disc. Using advice gleaned on this forum I have tried cleaning the lens, system restore, booting with the C button pressed, tried F12, downloaded a driver for the DVDram drive, and finally removing the drive and putting it back.
The seller says it always worked fine for him and the laptop arrived in perfect condition. Anyone got any other ideas?

Answer:CD/DVD drive of Equium A60 does not work properly

Hi,

sounds tricky, especially because you recovered the machine and that means that the drive works flawlessly. So whats now your problem I don?t understand whats really the matter.
You mean you cannot read cd?s under windows? Do you have a burning program or something else which could block the drive (prevents the drive from reading)

Can you clarify your problem a little more precisely?

Cheers

11 more replies
Relevance 43.05%

Hello, I seem to be having an annoying problem with my Windows search. (The one at the bottom of the 'Start' menu..)

The past few months it doesn't search for files I KNOW are on the computer. (In my documents)

It just says 'No items match your search'.

My search settings are as follows



This is REALLY frustrating. I hope someone can help! Thanks!

Answer:Windows 7 Search Does Not Work Properly.

  
Quote: Originally Posted by North Antri


Hello, I seem to be having an annoying problem with my Windows search. (The one at the bottom of the 'Start' menu..)

The past few months it doesn't search for files I KNOW are on the computer. (In my documents)

It just says 'No items match your search'.

My search settings are as follows



This is REALLY frustrating. I hope someone can help! Thanks!


Have a look at the tutorial Windows Search - Configure and Use. It may help.

3 more replies