Computer Support Forum

Outlook 2002 w/ Vista - "Stopped Working" pops up when sending

Question: Outlook 2002 w/ Vista - "Stopped Working" pops up when sending

Hey gang, I've got a big problem. I've got Outlook 2002 on Windows Vista. Sometimes when I send out emails as soon as I hit send, Outlook will pop up with a message that says, "Outlook has stopped working, Windows is looking for a solution." The solution it gives me is to upgrade. I would hope that just because I'm using an older Outlook that it wouldn't screw me over like that. What can I do? The problem seems to happen randomly but when it does it happens over and over and over again. HELP!

More replies
Relevance 100%
Preferred Solution: Outlook 2002 w/ Vista - "Stopped Working" pops up when sending

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 105.37%

I am using Outlook 2002 on Windows XP with two users. On both user accounts I select the delivery option to "leave mail on server." This works fine with one user, but it is not staying "selected" with the other user. Let me explain: I check the box that says "leave mail on server" and while I'm in Outlook that session it seems to be working fine, but when I close Outlook and then open it again later to check email, I notice that it is not leaving mail on my server. I go back to the delivery setting and the "leave mail on server" check box is unchecked?? I've gone in and selected it at least 10 times and each time I log back in it is not checked anymore.

I checked the settings against the other user, where this option is working just fine and as far as I can tell both users' Outlooks are set up exactly the same.

I'm using McAfee SpamKiller, not sure if this has anything to do with the problem, but I know these kinds of programs can affect email clients in wierd ways like this.

Does anyone know how I might be able to fix this?

I appreciate any advice that can be offered.

Thanks,

-B
 

Answer:Outlook 2002 "leave mail on server" not working

6 more replies
Relevance 102.09%

I'm getting: "A problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available". This happens within minutes of starting Outlook (in the non-safe mode)

Outlook works in safe mode.
I cannot turn off the addins.... see attached
Also attached is a snapshot from the event viewer...
Thoughts???
Thank you
Running Windows 7 Home Premium Edition (64 bit) SP1
Computer: Dell XPS 435T/9000
Microsoft Office Professional Plus 2007

Answer:Outlook 2007 "Microsoft Office Outlook has stopped working"

since when are you getting this error. have you tried a repair install from control panel >add/remove programs. you can also let this tool "microsoft office diagnostics" check for errors & fixes.

7 more replies
Relevance 100.45%

Hi

Am running windows vista home premium with office 2007 professional installed.

About a month or two ago, I've noticed that whenever I close outlook, i get an error message:

"outlook has stopped working"

Everything seems to work fine otherwise, but this is a little annoying and I'm wondering if there's any way to either fix the problem or turn the error warning off.

Thanks
Kevin
 

More replies
Relevance 100.04%

I'm getting the Program Has Stopped Working error dialog box when I try to launch MS Word, Excel, etc. and then the program closes. The programs will usually open successfully to a blank document or spreadsheet but then when I use a dropdown menu to try to open file, the dialog box appears and the program terminates. At first I thought malware was the problem so I posted in the MG malware, ran all the fixes that Chaslang recommended and Chaslang thinks my PC is clean of malware and that this is a software problem. The Malware thread is linked below.

Has anyone seen this problem and have any ideas? Am I looking at reinstalling the programs? I'm really worried that I will have to do an OS reinstall. That will cause me a ton of pain . . . .

http://forums.majorgeeks.com/showthread.php?t=280160
 

Answer:Multiple "Program Has Stopped Working" Errors Outlook, Word, Excel, PP, Adobe, etc.

Re: Multiple "Program Has Stopped Working" Errors Outlook, Word, Excel, PP, Adobe, et

Had a similar problem, and the solution for me was to reinstall flash and shockwave. I narrowed it down to activex controls being messed up by an uninstaller. I think it removed some shared .dlls or registry keys when I unistalled a program. :-o

Have you run the repair feature of MS Office in add/remove programs?
 

2 more replies
Relevance 98.81%

I recently re-installed Windows Vista on my laptop and everything was fine the first few days. But yesterday, I got a message of "_[Program]_ has stopped working." It was a minor/small program so I ignored it. But after it happened about 3 times, to 3 different programs, I did a drive check as it suggested. It was scheduled to the next restart, which I did immediately. It said it was clean. Then later that night, it says it unexpectedly shut down (I was not at the computer when this happened.)

As for the random freezes, I thought it was just in browsers, but it seems to be happening when I'm just going through the computer also (folders, etc.), but not as often.
I noticed it started happening after I downloaded Google Chrome. Is it because I have too many browsers? A friend told me that could slow my computer down. I have IE, Firefox, and Chrome. I use both Firefox and Chrome, but not at the same time of course. It freezes for some seconds, sometimes a few minutes, randomly when I'm not even doing anything big. It even freezes sometimes while I'm scrolling!

Again, I'm not doing anything that should lag it. I only go on a few widely-known websites and one instant-messaging program.

It was not like this before the re-install. (I was forced to re-install due to Windows being damaged, however.)


So, what's wrong with it? Is it the hard drive? Should I uninstall a browser?
Please help and thank you in advance.
If you need any other information, just let m... Read more

Answer:[SOLVED] [VISTA] "_____ has stopped working" + Random Freezing

Quote:





Originally Posted by YNO


I

I noticed it started happening after I downloaded Google Chrome.. . .




Run a System Restore - choose a restore point prior to the installation of Chrome
START | type rstrui - choose restore point

Regards. . .

jcgriff2

.

2 more replies
Relevance 98.81%

Ok I should also say the "search protocol host stopped working" pop up happens right after boot up ! IE9 starts up but when I go to a sight it acts like its there but the screen is blank !
tried this but its not working http://www.techsupportforum.com/for...er-stopped-working-and-was-closed-138952.html
posting this with google chrome because IE9 is not working !

I just noticed the windows spider sol and windows freecell sol are coming up blank screen also


any help would be apprciated thanks bill
 

Answer:"Search protocol host stopped working" Windows Vista

A friend at work experienced the same problem on his PC. Turns out he had a corrupt indexing file. You could try posting the details from Event Viewer, if that is possible. I wouldn't be able to help you interpreting them, but maybe some of the more experienced members could.

Have you tried disabling Windows Search? I did this on my friend's PC as a temporary measure . Got IE working, although searches were rather slow. It isn't a solution, but it could afford you a temporary -- albeit inconvenient -- workaround.

Sorry I couldn't be of more help. Stick around, though, and wait for inputs from the more knowledgeable members.
 

4 more replies
Relevance 98.81%

Hi all,

Just got my Vista machine from Dell, 2-days ago. Data transfer went smooth, things were going great.

The I started getting "Intel Alert Server Stopped Working" message on every startup.

I think I broke it with trying to load Norton Password Manager, which is not compatible with Vista, so I had to do an uninstall. It was after this reboot, the message started appearing.

Choosing RESTORE from several checkpoints did not work.
Cleaning the Registry, as best I could, did not work.
Googled "Intel Alert Server" nothing useful, from what I saw.
I have since reloaded Norton Internet Security and Money since it appears the the live update on both were also broke.

Two questions:
1. How do I get fixed the "Intel Alert Server" message?
2. Can you recommend a specific Vista-compatible password manager package?

Thanks, Nickie
 

Answer:"Intel Alert Server Stopped Working" Vista Message

oops...message is "Intel Alert Service Stopped Working". In the original post I quoted wrong.
 

2 more replies
Relevance 98.81%

Here is the situation:

Once I logon to my vista user account on my laptop all of my programs say "(program name) has stopped working". I will attach a pdf file of what I see! I can't use certain programs like paint and notepad and others. But I can use Internet Explorer.. PLEASE HELP!! I think this all began when I started to see the "reliability metrics analysis calculation" error a lot...I just started seeing that one alot more and now on top of that, I get the errors (like you see) in the link below


I get the following:

"Desktop windows manager has stopped working"
"msftstp.exe has stopped working"
"windows command processor has stopped working" (5 times)
"microsoft sync center has stopped working"

***PLEASE TAKE A LOOK AT THE .PDF FILES (ATTACHED) BELOW

PLEASE HELP FAST THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Answer:When I Startup Vista All of my programs say "(Program Name) has stopped working" HELP

See what happes if you run in startup mode? f8 on bootup.

You should try some malware scans while in safe mode too.

10 more replies
Relevance 98.81%

I have just tried installing some software on my laptop running Vista.  I have installed the same software from the same disks on 2 separate desktops running XP Home and XP Pro with no problems.On the laptop I get a MS Windows error message stating:  "Administration has stopped working""A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available"That's it!It does say "ADMINISTRATION" not "ADMINISTRATOR"I have only one user account, set up as administrator.Anyone have any ideas?

Answer:Error Message In Vista - "Administration has stopped working"

Vista 32-bit, or 64-bit? What program is it? Link, please.Do you have UAC enabled?Try to right click on installation file, and click "Run As Administrator".

4 more replies
Relevance 98.81%

This is my first post here. I have exhausted all other options and hope someone can give me some direction here. I'm running Vista and have had a recurrence lately when i try to open "my computer" I get the error message "windows explorer has stopped working and needs to restart", then it cycles and the second message appears " windows explorer is restarting", however I still am unable to open the folder. I have tried updating drivers, changing antivirus programs, checkdisk, i ran hijack this the log is below. I also started in safe mode and DO NOT have the problem in safe mode. Any ideas?

I attached the hijack this log seeing it won't allow me to paste it here, sats it has links in it.
 

Answer:"Windows Explorer has stopped working and needs to restart" in Vista,

Sounds like an infection (or a driver issue due to the fact you can access via Safe Mode). The best advice we can give you is to go to our Virus and Malware Removal forum.

Normally we would say to read the 8 step sticky and follow it step by step and when you go to post attach the required logs.

However, you can't access the internet on your possibly infected system. I would still post there and let them know of your issues. Either Bobbye or Broni or someone else will see your post and give excellent suggestions and help.

Make sure the tile of your post is solidly descriptive such as "Help: Can't Access Internet to Run 8 Steps" or some such thing.

Good luck.
 

1 more replies
Relevance 98.81%

Hi, On my Windows Vista OS some but not all Programmes when I try to install them I get the message "install Programme stopped working" and I cannot Install the programme.
Is there an easy fix or a settings I can change to get around this problem?
Kind regards Blood.

Answer:Windows Vista "Install Programme" has stopped working

Are you rightclicking and choosing 'Run as Administrator' when you install them?
is there anything more in the message - like name of which program install has stopped working.
Are you installing a program d/loaded and saved to your Downloads folder or running the install straight from the internet Or is it a program on a DVD?
What antivirus and security etc programs have you got running? (they may be stopping the install)

1 more replies
Relevance 98.81%

Vista Home Premium SP1 - IE 7.0 - IE continually errors out after a max of 3 minutes. If I simply open Google and sit there, it's OK, but as soon as I try to surf, I have a max of 3 minutes before I get the error. Firefox works fine. I went to the Event Viewer > Applications Log and sure enough, there's an IE error. I attached the screen shot below. Under the System Log section, there's an error that occurred about 4 minutes or so before the IE error and it mentions the Kerebros thingy. I don't know if these 2 errors are related but I figured I'd mention 'em both..... any help will be appreciated!
 

Answer:"Internet Explorer has stopped working..." error in Vista

You can try upgrading to IE8 and see if that fixes your problem.
 

6 more replies
Relevance 98.81%

Is there a way to DISABLE the displaying of the "XX has stopped working" error dialog in Windows Vista?
 

Answer:Disabling the "XX has stopped working" error dialog in Vista

Hi there, Welcome
Let us know the exact name of the error you are getting and we could probably help you out better.
 

2 more replies
Relevance 98.81%

When I right click on certain shortcuts or programs, I get the following error message:

"Windows Explorer has stopped working. Windows is checking for a solution to the problem..." and then "Windows explorer is restarting"

It only seems to happen to recently installed/created programs.

(this has been happening for about a month)

Also when I was using a compiler called Dev-C++ it gave me an error message "out of memory" after about 20 minutes, so that I had to close it using task manager.

Specs:
Dell Laptop inspiron 6400
windows vista 32-bit
2GB memory
20GB free disk
2*1.73GHz CPU
 

Answer:Vista "Windows explorer has stopped working" error

Do you get the error if you start program from the start menu or just your desktop? Have you tried deleting the shortcuts and making new ones?
 

4 more replies
Relevance 98.81%

Once i logon to my vista user account on my laptop all of my programs stop working. I will attach a pdf file of what i see! I cant use certain programs like paint and notpad and others... PLEASE HELP!! I think this all started when I saterted to see the reliability metris analysis calculation error alot...i just started seeing that one and now i get the errors in the link below

also check here to see the screen i get when i log on...(the uploader said this was a big file so i couldnt upload) take a look thanks alot.

-----update i cannot upload this picture of what happening so i will type all the messages i get...

i get the
"Desktop windows manager has stopped working"
"msftstp.exe has stopped working"
"windows command processor has stopped working" (5 times)
"microsoft sync center has stopped working"

AND THE LAST ONE IS ATTACHED AS A PDF FILE


PLEASE HELP FAST THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 

Answer:When I start Vista all my programs say "(Program Name) has stopped working"

Can you try 'chkdsk' ? It is worth trying a simple check first, see what the effect is, before you do anything more serious. To use Windows 'chkdsk', in Vista, 1) Go to 'Start' type 'cmd' 2)in the list, right-click on 'cmd', choose 'Run as Administrator'
3)In the box, type, chkdsk/f (press enter) 3)type 'Y' 4) Reboot your PC and see if Windows can fix your problems with the system.
 

3 more replies
Relevance 98.81%

THIS ERROR MESSAGE SHOWS UP PERIODICALLY AND FORCES A PROGRAM CLOSE.

I HAVE INSTALLED THE LATEST PROGRAM AND UPDATE FROM NewSoft:
Page Manager Patch 6.16.10 for 6.02, 6.04, 6.05, 6.12, and 6.14.
Patch Description : 1. Support for Windows Vista.
2. Update Copyright to 2007.
3. Support for Microsoft Office 2007 and Vista E-mail.
4. Fixed Live Update issue.
5. Update Version number to 6.16.10.

PM61610Update_EN
 

More replies
Relevance 98.4%

Hi,

While using the computer I all of a sudden got the messages:
"Services and Controller App has stopped working". and "Windows has found a critical error and will restart in one minute".
Detailed box shows
APPCRASH
services.exe

After a restart, the computer does the same thing over and over again.

I managed to stop the problem by deactivating the wireless internet adapter via the radio switch.
Interestingly, whenever I make a connection to the internet (not when I activate the adapter), the error occurs again.
It does not matter whether I connect via Wireless or LAN, in both cases Vista comes up with these error messages and restarts.

Iīm on windows Vista Home Basic, SP2.

Does anyone know what this can be? And how to solve it?

thanks

Error message (in Dutch):

Probleemhandtekening:
Gebeurtenisnaam van probleem: APPCRASH
Naam van de toepassing: services.exe
Versie van toepassing: 6.0.6002.18005
Tijdstempel van toepassing: 49e01a51
Naam van foutmodule: unknown
Versie van foutmodule: 0.0.0.0
Tijdstempel van foutmodule: 00000000
Uitzonderingscode: c0000005
Uitzonderingsmarge: 01cceb66
Versie van besturingssysteem: 6.0.6002.2.2.0.768.2
Landinstelling-id: 1043

Lees onze privacyverklaring:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0413
 

Answer:"Services and Controller App has stopped working" - Vista restarts post internet conn

Re: "Services and Controller App has stopped working" - Vista restarts post internet

hello ... I have the same problem ...

could you fixed it?
 

3 more replies
Relevance 98.4%

Hi, I'm running Windows Vista Home Premium with SP1, and just recently my computer started telling me "Desktop window manage stopped working and was closed" as soon as I log into my account. For whatever reason, ever since this started happening, the program "Steam" will instantly crash as soon as it loads."

HJT log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:25:53 AM, on 11/27/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\WerFault.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\TortoiseSVN\bin\TSVNCache.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Zune\ZuneLauncher.exe
C:\Users\Nick\AppData\Local\Google\Update\GoogleUpdate.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Logitech\SetPoint\SetPoint.exe
C:\Program Files\Common Files\Logishrd\KHAL2\KHALMNPR.EXE
C:\Windows\System32\mobsync.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe
C:\Windows\system32\SearchFilterHost.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.... Read more

More replies
Relevance 98.4%

I get this popup everytime I try to use iTunes or plug in my iPod to charge. I've tried uninstalling, reinstalling, uninstalling, reinstalling an older version to no avail. This looked interesting until I realized that I can't even try that because I can't access iTunes at all in the first place to make those changes. I know some of my internet settings are screwed up from virus removal awhile back (my Windows can't search for updates either), could that have something to do with it? The problem is I can't remember for sure if the problem started when I upgraded to the latest version or after the virus removal, but I think it was after I upgraded to the latest version. Any suggestions?
 

More replies
Relevance 97.58%

I am running VISTA Ultimate Edition and of late am frequently getting the error message "Viewmgr has stopped working" - what can I do to get rid of this error message? It appears sporadically and upsets other processes sometimes. There certainly seems a dearth of tech support for VISTA online!

I am also informed by one of my diagnostic programs that there is an update available for my VISTA but when I run it I get an MS error message saying "this is not for your operating system".

One of my hobbies is simulators for infantry combat (FPS) and civilian and combat flying. I have without success been trying to get CFS3 to run under VISTA but only because I want to give a second try to Over Flanders Fields the total WW1 MOD which has apparently been much improved. Combat Flight Simulator 3 crashes to blue screen after a few minutes flight under VISTA. I gather from other Fora that this is a known issue and that MS have no intention (as usual) of supporting CFS3 or making it work with VISTA. Accordingly does anyone here have any fixes?

As for the issues of permissions in VISTA, even though I own the OS, the PC, and am the sole user & Administrator I STILL keep being told that I have "insufficient authorization" for no end of things.
VISTA's so called security seems designed to make it as hard as possible for the user to do anything at all. I am close to ditching it and going back to XP.

Answer:VISTA "Viewmgr has stopped working"

"Viewpoint Media Player" and Viewmgr are installed along with AOL IM.
Go to Programs and Features and uninstall both of these applications.
Next, go to C:\Program Files\ and delete the folder(s) if found:
C:\Program Files\Viewpoint Media Player <---folder
C:\Program Files\Viewpoint manager<--folder

If you are using Norton/Symantec antivirus (suite)...this may be a cause of your problems.
Also make sure your drivers are updated.

1 more replies
Relevance 97.58%

Hey all.

I'm getting these errors everyone once in a while, maybe twice or three times each session of using Windows.

It mostly happens in IE, but it has also happened in Zune. I close the window and a small window appears stating the application has stoppped working, it then "tries to find a solution" and re-launches the application (mostly IE in this case).

Anyone else having this problem?
 

Answer:Vista: "Application X has stopped working" huh?

Iíve had the same thing happen, just not as often as you. All IE for myself. Iím always having weird things happing with vista. My screen resolution always changes on me but I think its nivida driver not vista
 

2 more replies
Relevance 97.17%

My Windows login and logout sounds have stopped working. I went to the control panal and checked in the "sounds" and the login sound worked when I tested it there plus I checked the sound mixer and all sliders are active and pulled up. What could be the problem? All other sounds are working?

RBG
 

Answer:Windows "Login" and "Logout" sound stopped working

http://www.kellys-korner-xp.com/xp_tweaks.htm

line 211 left hand side

211. Restore Startup and Shutdown Sounds

hope it helps

joan
 

2 more replies
Relevance 97.17%

Good Morning
HP Dv7-6bxx laptop installed Windows 'Home' a few days ago.
I am plagued with an error in the Reliability History report...
"Bluetooth Device Monitor, Stopped working"
Path...C:\Program Files (x86)\Intel\Bluetooth\devmonsrv.exe
The errors occur irrespective of the power settings of the following devices:
I have a Bluetooth mouse that works fine powered On all the time
Printer/scanner which is Bluetooth and it makes no difference whether it is powered On of Off
Plantronics Headset that works fine whether it is powered On or Off...

I have attached the report and the frequency
In anticipation of help...Thank you
Stu

More replies
Relevance 94.3%

Using Windows 7 Enterprise Edition (64 bit) and Office 2010. When dragging a message from mail to the Calendar (in the lower left under the folder list) to create a new meeting/appointment, the calendar dialog will "pop under". How do I get the calendar dialog box to grab focus?

Thank you
-Neal

Answer:Outlook 2010 - When dragging message to calendar, dialog "pops under"

If you still interested, could you please create and post a screenshot.

3 more replies
Relevance 94.3%

Last week I ended up mistakenly downloading the Rogue "PersonalAntivirus" program onto my machine.

I got the program removed by downloading the " Microsoft Malicious Software Tool"

Then as I was there I downloaded the free trial of "Windows Live One Care"

Since this all happened I can no longer recieve or send mail thru "Outlook 2002

I get an error box; error (0X80042108) ....unable to connect to your
(POP3) mail server.

I called my servers support, but they didn't know much about "Outlook"
They did tell me what should be in the Incoming Mail server box and the outgoing mail server box
When I test the account settings I get the following error.

Log onto incoming mail server (POP3): Unable to connect to the incoming mail server (Pop3) Please verify the port and SSL settings for the incoming server..................

Then same message error but for the ....outgoing (SMTP) server.......

Note;
1. I can access my mail from my servers web page
2. I have used Outlook fine for years with no glitches

Any ideas what I need to do

Gary
 

Answer:Outlook 2002 stopped sending and recieving

Was checking a few things and realized that the "Norton Automatic updates" have not been done for 4 days.

When I clicked "Run Live Update".
I got an error that it could not access the internet....that I should check my connection.

Gary
 

2 more replies
Relevance 93.89%

I installed MS Office XP (2002) on a new Sony laptop (OS Win XP). I moved my Outlook calendar pst files from the original computer to the new Sony. It transferred fine and I can open the calendar with all appointments. However, when I try to open an old appointent or start a new one, an Outlook error message pops up: "Not Implemented". Can anyone tell me what this means and how I can get my calendar going?
 

Answer:MS Outlook calendar-"Not Implemented" pops up when try new message.

Try the Detect and Repair feature under Help.

Steve
 

3 more replies
Relevance 93.48%

"A problem caused [name of program] to stop working correctly. Windows will close the program and notify you if a solution is available." But no solution shows. I have been using the same HP Pavilion tx1000 for a year and a half with no software or compatibility issues. I run Vista Home Premium, Service Pack 1 - 32 bit. Slowly this message began to appear with every microsoft program I opened and then started to spread to non microsoft programs. I tried reinstalling the programs, doing a system restore to the oldest restore point I could, I also tried uninstalling any window updates that were installed right before my problems. I have read some strings that indicate it may be a compatibility issue between the service pack 1 and vista but the service pack came with the computer and it has been working fine until recently. I am at loss what to try next. Has anyone using Vista Home Home Premium experience anything like this!!!
 

Answer:Windows Error Message "{Name of Program} has stopped working" "A Problem caused ...

hi and welcome the first thing to do is run your anti virus and malware progs this will check for issues there and hopefully rule it out the next thing to try is sfc/scnw http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html its a how to and also try this http://searchenterprisedesktop.techtarget.com/generic/0,295582,sid192_gci1276029,00.html this will check for other problems in both your files and your hard drive
 

1 more replies
Relevance 93.48%

I have a piece of software that periodically fails for some unknown reason. I have pretty much given up on trying to figure out what its problem is. I simply respawn the process if it fails to respond or no longer exists. The process runs several times a
minute. Occasionally, I get an error message saying my software "has stopped working" followed by another messagebox saying my software "is restarting". And then it restarts my process. This is beyond stupid since my process requires command
line arguments that are not being provided when this restart occurs. I simply want to disable these messages or at least
disable this auto restart. Is there any way to do this?


I have already tried the regedit hack:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting]
"DontShowUI "=dword:00000001

This didnt work. I still get these messages.

More replies
Relevance 93.07%

After the recent Win10 update, my nvidia graphics cards were updated too (Titan+1070) and since whenever I use Blender 3D (and I suppose any other graphics software including games but I haven't tried) audio (ie. background music) is making random clicks/pops.

It was never a problem before the update.

This is exactly the reason I hate when Win10 updates automatically and no options are available for disabling automatic download of updates. It ALWAYS make more problems than it solves. Before the update, my PC worked just fine there was absolutely no reason ever to have Microsoft mess up my PC!

I demand a solution to this problem!

More replies
Relevance 91.43%

Many people have been affected by the Vista and Sandbox 2 editor importing files to the program just Stops like a firewall, but not,
its a option is turned on by vista, for protection,
i believe,
not allowing the transfering of files,


I turned off UAC and it seems to me like it is still on, or something
anyway here some others explainig it better,

Crymod Modding Portal | Feedback & Support Forum | Sandbox 2 Texture loading crash
"Hey, I'm having a crash problem with the editor. Whenever I go to the texture menu under "terrain" and try to create a texture other than the regular "default" ( I follow the exact steps in the online manual), I press "load texture" and immediately the editor screen lights up white and i get a "this program has stopped working" message.

I'm running windows vista ultimate 32bit with all the updates off of windows update and the virtual memory space fix. Just let me know, and I can do the crash diagnostic report thing but I didn't just yet in case there was an obvious solution."
----
Crymod Modding Portal | Feedback & Support Forum | Sandbox2 Crashing

"I was going to uploade my Editor.log file, but there is a 200Kb file size limit for uploads so it won't let me. The file is over 200Kb.
My problem is, every time I go to the Terrain Layer Editor, select a layer, and then click Load Texture, and then select a file and click open, the Program crashes with a Vista Appcrash notice. C... Read more

Answer:Vista 64-"Sandbox 2 editor has Stopped working"- when importing files to editor.

Tried to edit post,
Just reinstalling Crysis didnt work!

The Real Fix,

I reformatted and reinstalled Vista 64!

I would recheck Crysis everytime your install a new program,
I wouldnt reinstall everything just essentials updates and programs first.

Then Crysis!

1 more replies
Relevance 91.43%

I keep getting strange warnings on some forum sites and stuff like craigslist and ebay at times. You know when you go to a sire that is "untrusted" and there is a "get me out of here" button in grey and under that there is the "Technical details" text (clickable" and the "I understand the Risks" text (also clickable). I get thee when I install a new server on my LAN and I go to an admin port on that server and it says it is an unknown connection.

But what I am getting, while browsing stuff on Craigslist, like in the forsale, I click on an ad (the ad hasn't even opened yet) and it takes me to this "Untrusted connection) screen. I also get this for a number of forums from time to time. I use the same URL on one computer and it doesn't show up, but on another computer it will, both loading at the same time. Also it seems that it can vary based upon which ISP I'm connected with at the time - sometimes one will have the warning while the other doesn't, sometimes both have it.

I've suspected MITM attacks on my machine and don't know what to do about figuring that out and how to stop it.

Can anyone shed any light on this issue or point me in the correct direction?
 

Answer:"This connection is Untrusted" - pops up in browser on "safe sites" - why?

What are you using for an antivirus program?
 

4 more replies
Relevance 91.02%

How can I prevent the "Outlook Send/Receive Progress"
window from popping up every time Outlook automatically
checks for new mail?
Your in the middle of something and it pops up, drives me
crazy!

Thanks
Will
 

Answer:Annoying "Send/Receive Progress" window, Outlook 2002

Wilbur said:

How can I prevent the "Outlook Send/Receive Progress"
window from popping up every time Outlook automatically
checks for new mail?
Your in the middle of something and it pops up, drives me
crazy!

Thanks
WillClick to expand...

Will,

Did you ever find out how to get rid of that $^T#$#$ display. I have the box checked (not to display) but that doesn't do any good.

Larry
[email protected]
 

2 more replies
Relevance 91.02%

When I click on "Outlook Today" in MS Outlook 2002, I get "A runtime error has occured, do you wish to debug? Line 297, error: Library not registered."

How do I fix this?

Thanks.
 

Answer:MS Outlook 2002 runtime error: "library not regisitered"

Hello. If anyone is reading this post, please let me know how to fix the runtime error in my 8/17 post regarding MS Outlook 2002.

Thanks.

Stuyve
 

1 more replies
Relevance 91.02%

All of a sudden, an address that I email to often won't go through. I get the message "DELIVERY FAILURE: User [email protected] not listed in public Name & Address Book"

I tried to access help but I can't understand what they're talking about. The address book, or whatever it is, is a mystery to me. It's not related to the "contacts", is it? Because I have all my email addresses in the contacts area. The address book, I don't know.

How do I resolve this?

thanks!
 

Answer:why do I get "delivery failure" when I send message in Outlook 2002?

are you able to type there address in and send that way?
 

3 more replies
Relevance 91.02%

WinXP PC running Office XP SP3. Sitting behind an Exchange 2003 Server and an Win 2000 SBS/ISA server.

Outlook 2002 issue - when recieving forwarded emails with file attachments of any type (in particular from <username>@bigpond.com), the forwarded email is recieved in <user> Exchange inbox with the attachment removed and the message body of the forwarded email ATTACHED to the email as the only attachment. (ie the original file attachment seems to get "dropped")

Other users on the same network using same version of office XP Pro that are CC'd the same email recieve both the forwarded message text and the original email attachment. They can double click on the attachment and see the forwarded message, then double click again to get to the original attachment.

Any ideas?...im running out of them...
 

Answer:Outlook 2002 "dropping" forwarded email attachments

The attachments can be .docs, pdf's, .xls...makes no difference. Outlook Security isnt blocking them as far as i can tell
 

1 more replies
Relevance 91.02%

For some strange reason (aren't all of these computer problems strange?), every time I click on the "Send/Receive" button in Outlook 2002 I get a pop-up box that says "Operation failed". My email will send and receive on it's programmed time schedule, but not if I click on the button manually.

This just started yesterday as far as I know.

I've rebooted, run Spybot, Ad-Aware SE, AVG, and no problems show up.

Any ideas?

Thanks!
 

Answer:"Send/Receive" function fails in Outlook 2002

Try creating a new Outlook profile.
http://support.microsoft.com/default.aspx?scid=kb;en-us;312354
 

2 more replies
Relevance 91.02%

Hi -

I'm having some trouble with Outlook XP (2002) and Exchange 2007 and haven't been able to find a solution elsewhere.

Basically, I get a message when I try to log on telling me that the server is down or that there's a network problem. (The exact text is: "Unable to display the folder. Microsoft Outlook could not access the specified folder location. The Microsoft Exchange Server computer is not available. Either here are network problems or the Microsoft Exchange Server computer is down for maintenance.")

To get around this, I have to:

1) delete my mail account
2) re-create my mail account,
and
3) restart Outlook.

Going through this process will allow me to read my mail and access the calendar until I stop Outlook, at which time I need to go through this entire process again.

Another potential symptom of the problem is that if I put a name in as the exchange server in the mail setup window, this whole process doesn't work -- I actually have to put in the IP address. When I click "next" the address is replaced with the name (e.g., "EX03"), which might be related to why it doesn't work the next time I try to start Outlook).

Any help/suggestions would be greatly appreciated.

Thanks
 

Answer:Solved: Outlook XP (2002) vs Exchange 2007 -- reports "not available"

Sounds like a DNS issue, for some reason it is having problems resolving the hostname to the IP. Make an entry if your HOSTS file for the server.
 

2 more replies
Relevance 91.02%

I've been getting the following prompt for some time now: The data file "Archive Folders" was not closed properly. Checking file for problems. Then, the program would open.

It is now still giving me that message, but the program closes immediately after doing so. I am not sure what to do, can anyone help?
 

Answer:Outlook 2002- The data file "Archive Folders" was not closed properly

Have an update to Outlook problem - Help!!!!

I found the Inbox Repair Tool and scanned my .pst file. Everything went well, there were errors, and I ran repair afterward. I backed things up and all that happy stuff and thought I'd be all set, but the program still opens, says "The data file "Archive Folders" was not closed properly (actually the first time I ran Outlook it didn't check that) and then the program closes. Now where do I begin? I did a Detect and Repair on Office XP yesterday. Should I perhaps uninstall the whole program and reinstall it? Or, is there another file I need to address? Please someone help me with this. I've been going nuts with this problem for days. Thanks!!!!!
 

8 more replies
Relevance 90.61%

I have a problem with e-mails containing internet links. When I click on the link I expect Interner Explorer to open, but instead a window containing "My documents" opens.
Please help me!
 

More replies
Relevance 90.61%

XP Sp1, Office XP, Outlook 2002 Sp3, up to date.

This issue is in an additional mailbox the user (2 in this case) opens when Outlook starts up.
When trying to open an email in the folder, there's a good chance they get "Can't open this item. You don't have appropriate permission to perform this operation." Here's the kicker, if they keep trying, or try others, eventually they can open it. Once they are able to open the email once, they can open it over and over. Then they can go back and open some of the previously un-openable emails.
I've seen a reference in the KB articles, and it mentions a post Sp3 hotfix, but all updates have been applied. There are probably about 20 people that access this box, and so far only 2 have said anything. Maybe the others are more patient.
Another thing that stumps me is that one user says it only happens in the morning, before anyone else comes in. In the afternoon, everything's hunky-dorey.
I set up this users mail on a spare box, and cannot recreate the problem. I guess it's something on the local PC, but figured I'd ask. The mailbox currently has about 47mb in it, with a 60mb limit, and a 300mb cutoff.
My next course of action is to recreate the user's profile on his box, but he won't be available until Monday, plus I want to do it in the morning.
Anyone else have an idea?
 

Answer:Outlook 2002 error: "Can't open this item. You don't have...."

Anyone?
 

1 more replies
Relevance 90.61%

In any windows app (or at least all the ones I've tried), if I choose Send - As Attachment, outlook will open a new message, but the "Send" button seems to be disabled. It's not grayed out and it looks like I've successfully clicked on it, but it doesn't send or close the message. There's no error message - nothing. It's as if the button itself is fine but there's no action specified for the click. All the other toolbar buttons seem normal.

However, if I create a new message in outlook, and add the same file as an attachment, it sends the message with no problem.

I'm running Office 2002 SP3 on Win XP Pro Version 5.1.

Obviously since it doesn't completely prevent me from sending attachments, this isn't a huge problem, just an irritation, but I'd be interested if anyone knows anything about it.
 

Answer:"Send as Attachment" problem in Outlook 2002

8 more replies
Relevance 90.61%

I recently upgraded from Windows 98 SE to XP Home. When I did, I opted to use Outlook 2002 rather than Outlook Express which I had used with '98. Two things happened from which I don't seem to be able to recover.

First - I lost all the messages from Outlook Express. I wish I had them back, but I can live without them - so far.

Second - I have somehow acquired a duplicate "Personal Folders" list. I have two "Outlook Today" - [Personal Folders] listed in my folders list. Everything in the first one is duplicated in the second. When I download messages, they appear in both "Inbox" folders. When I add a folder to the first, it appears in the second and visa-versa. If I delete a message in any of the sub-folders. it disappears from the other "mirror" sub-folder.

So far, I have been unable locate an actual duplicate file anywhere. It's almost like Outlook is reading the same file twice and displaying it's contents in two identical folders. Although it doesn't seem to hurt anything, I'd like to get rid of the duplicate displayed folder.

I'm a rookie on this stuff, so any help would be appreciated.

Thanks.
 

Answer:Outlook 2002 Duplicate "Personal Folders"

Open Windows Explorer.
Go to Tools-Folder options.
Hit the View tab.
Make sure you ARE viewing hidden files/folders.
Make sure you can SEE file extensions for known file types.

Do a search for *.pst files.

You probably have two in the same location somehow.
Just move one of them someplace else.

You can't do it when Outlook is open. Only when it's closed.

You can also try running Detect and Repair from the help menu.
 

1 more replies
Relevance 90.61%

I have MS Outlook 2002 SP-2, which I'm starting to use over Eudora 6 for a variety of reasons (mostly because Eudora seems to jumble up my older emails). However, it seems that Outlook doesn't have a function that I use very often, the "Send Again" where you basically re-edit a message you sent out previously to be sent again to the same recipient or others. It seems that this function would be very simple, but I haven't figured it out in Outlook. Any help would be appreciated.
 

Answer:MS Outlook 2002 - can it do a simple "Send Again"? My old Eudora did.

6 more replies
Relevance 90.61%

Hey people...I think i have a problem nobody can help me with.I run Outlook 2002, with newest updates and all...If i use the find feature, it'll work. It starts searching.If i then press the STOP button, it will continue searching.The only way to stop it, is changing folders. But that'll cause you to loose the selection.I searched through the MS Knowlegdebase, but couldnt find anything. I've used google... that didnt profide me with any help.This situation is on every machine. I used multiple workstations, reinstalled the application a couple of times, even installed a new image.Local i cannot get it to stop.If i use outlook 2002 through a Citrix-session it can be stopped.. so my guess is, that resources are short on the client. BUT these workstations are not old.. there all P4 3.2Ghz with 1GB mem.This is not a big problem, it just annoys me..  The PST files aren't that big, about 400MB, as is the mailbox.Running with Exchange... If anyone thinks he can help me, and needs some more info...Just reply... ;-)Thanks in advance!Rox

More replies
Relevance 90.2%

Hello, got a bit of an odd problem, not sure if it's an outlook or a server issue but I'm suspecting outlook.
We're running terminal services with windows server 2008 and for the most part it's grand, but there's one user that has a bit of a problem.
When they send mail the mail gets sent no problem but about a quarter of the time the frame of the message remains. The border is there but the main text field is transparent. It'll stay there until it's closed.

It's not exactly mission critical but it's rather odd and I haven't been able to do anything about it so far

any ideas?


 

More replies
Relevance 90.2%

Hello -

Using Windows XP Pro with all the available patches and SRs fyi.

I've had this sending phantom messages problem for several months and finally decided to do something about it today I'm posting my case here in the hopes that it might help you fix this issue with Outlook 2003 (and/or possibly other versions of Outlook as well).

In addition to the phantom message issue, I was having an issue where messages would hang around in the Outbox and not be sent even after restarting Outlook 2003, and sometimes even after rebooting. That was causing some real problems, particularly when I wouldn't notice messages were hanging until several hours later lol.

So I started researching both problems at the same time, and just for kicks decided to change the port for outgoing mail (SMTP) to see if it helped with the stuck/hanging messages in the outbox. I set my main email account to use port 465 with SSL. I then sent a test message to myself and watched to see if it got hung up, but it did not. Cool, I thought, that might be one problem solved.

Then, before I received the test message back, I saw two read receipts arrive in the inbox - they were from January of this year! Having read that the "Sending 1 of X messages - when the outbox is empty" issue in Outlook can be related to read receipts I was curious if that problem would go away as well.

Sure enough I sent another test message, and for the first time in months Outlook said "Sending 1 of 1 ... Read more

More replies
Relevance 89.79%

This should be a basic question but I could not find the answer in Outlook Express Help. Using Outlook Express. When I send out a group email, is there a way to just have the name of the group in the "TO" box, for instance "Friends" At present, Outlook Express spells out each and every email address and this upsets some recipients.
Thank you.
 

Answer:Solved: Keep "TO" addresses private when sending a group email in Outlook Express

11 more replies
Relevance 89.79%

Hi I run Windows Vista Home Premium and Outlook 2007. I've set up POP3 access for Gmail and to download mail from mail.bigpond.com (an Australian ISP). Initial setup was fine and I can send test messages to myself.

Recently I've had trouble sending (but not receiving) email via Outlook. The following error message is shown:

Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) email server. If you continue to receive this message, contact your server administrator or Internet Service Provider (ISP).

This message occurs for both my email accounts.

If I reboot the computer, then sometimes the mail will be sent successfully. I've checked the "account settings" on Outlook- and they are exactly as those given by my ISP/Gmail. But when I click on "test account settings", the test message can't be sent.

What's going on?!
 

Answer:Outlook 2007 "Sending reported error"- can receive mail but can't send!!

Angela,

Refer to the earlier query in this section dated 10th April under heading " OE suddenly asking for Logon Password" which shows possible ways of overcoming this . I reckon it's server problem as I had it re-occur a couple of days ago . My Mail is Btinternet which started rejecting my outward messages. I know that BT uses Yahoo so Isubstituted "mail.yahoo.com" for "mail.btinternet.com" ( OE/Tools/Accounts/Properties/Servers) and it immediately started working . So whatever the ISP says it IS their fault and somehow their systems start rejecting things for no valid reason .
 

1 more replies
Relevance 89.79%

Hi,

running ie 9 & win 7 & avg

did cmd - sfc /scannow - no errors
no virus

problem started after ie9 install , so it seems

"windows explorer has stopped working"/"windows is restarting"

after error and little time all tabs pop up good and ready to go

just annoying - like my dog barking at 4:30am thinking she's a rooster

thanks,
marcus

Answer:[SOLVED] &quot;windows explorer has stopped working&quot;/&quot;windows is restarting&quot;

Hello Marcus,

Do you get this error when opening up IE? If yes does it happen instantly? or after browsing for a little while?

9 more replies
Relevance 89.79%

I receive this message when trying to open new emails, and I am also unable to preview new emails. Also, when I try to look at deleted emails, once again I get "Can't open this item". Suggestions??? Help!
 

Answer:Outlook 2002 SP3 "Can't open this item"

I have also already tried creating new .ost file, to no avail
 

1 more replies
Relevance 89.79%

When composing an e-mail in Outlook 2002 (which I've only used about twice) when you start to type a name in the "To" field, after a few characters it will display a combo box with a list of all matching addresses you've previously e-mailed.

I've found where I can turn this feature off (Under Tools, Options), but I've been asked how to edit the list so that only a few addresses appear. I have been assured it's been done before, but I can't find out how to do it anywhere.

Can anyone tell me how to edit the list?

Alison
 

More replies
Relevance 89.79%

I recently tried to install the 'notorious" Act program and do an email merge using Outlook 2002. The system froze and I had to manually shut down the computer.

When I later tried to use Outlook 2002 and clicked on Send/Receive I got a message which states precisely "Operation Failed" (That is exact message and I am making this point since it appears that Outlook has many similar error messages, all with their own fix, but there was nothing on the net related to this 2 word error).

I have uninstalled and reinstalled Outlook 2002, either on its own, or did a complete reinstall of Office 2002. Still get same message.

I also did 2 or 3 System Restores and reinstalled but still get same message.

Spent some time with my ISP who say it appears that registry has been corrupted and Outlook is picking up a corrupted registry value. I thought that the Restore would have restored my registry to a previous and "good" time. Is that correct? Does System restore also restore the registry values?

Would appreciate any help on this.

Thanks
John

Answer:Outlook 2002 - "Operation Failed"

No the System Restore doesnt fix all registry problems. As even though you restored you still could have a courruptes Registry. As you restore point could be after it got corrupted.

Try using CCleaner and see if that helps clean up the registry.

1 more replies
Relevance 89.79%

I'm using Windows 7 and for the last couple days I've been flooded with all sorts of "Program" has stopped working" notifications, from everything from the nvidia control panel to windows explorer to various processes that I don't even recognize that must be other ordinary windows processes. These just happen without warning, and when I restart my computer, I get about ten of them right on startup, everything is crashing and I don't know why?



Operating System
Windows 7 Ultimate (x64) Service Pack 1 (build 7601)

Processor
3.20 gigahertz Intel Core i5-3470
128 kilobyte primary memory cache
1024 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded

Board:
Gigabyte Technology Co., Ltd. H77M-D3H
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. F5 03/29/2012

RAM:
Slot 'ChannelB-DIMM0' has 8192 MB

Display:
NVIDIA GeForce GTX 660 [Display adapter]
Samsung SyncMaster [Monitor] (24.0"vis, s/n YCUYHVDZ702086, July 2010)

Audio:
NVIDIA High Definition Audio
VIA High Definition Audio
 

Answer:Windows 7: "Program" has stopped working"

Continuous, errors at start-up may be a sign of malware infection.

Publish a snapshot using Speccy..
Link: http://filehippo.com/download_speccy/

Once installed, click file > publish snapshot. Copy & Paste the url into your next reply.
 

1 more replies
Relevance 89.79%

I'm using Windows 7 and for the last couple days I've been flooded with all sorts of "Program" has stopped working" notifications, from everything from the nvidia control panel to windows explorer to various processes that I don't even recognize that must be other ordinary windows processes. These just happen without warning, and when I restart my computer, I get about ten of them right on startup, everything is crashing and I don't know why?

chkdsk came up with nothing.
as per suggestion by another user I booted into safe mode -- the crashes do not occur within safe mode -- good to know. I opened cmd and ran 'sfc /scannow'. no results.

also, a user suggested it may be my ram -- I don't believe this is the case because my XP installation runs just fine on the same hardware.

i restarted the computer into normal windows and even before windows could boot it said userinit.exe and runoncewrapper both crashed then windows media player, then realtek audio, then nvidia, and a ton of other processes. In fact it seems like every process that runs it happens to, even the screensaver. thats what i mean by it being system programs.

Also, it seems to for whatever reason be knocking my games from 40fps down to 12.
Avira and Malwarebytes and Spybot all have nothing to report in the way of viruses or spyware, but this problem behaves like malware. The sticky said that 64 bit scans cannot do rootkits? I did a rootkit scan with Avira with ... Read more

More replies
Relevance 89.79%

I'm using Windows 7 and for the last couple days I've been flooded with all sorts of "Program" has stopped working" notifications, from everything from the nvidia control panel to windows explorer to various processes that I don't even recognize that must be other ordinary windows processes. These just happen without warning, and when I restart my computer, I get about ten of them right on startup, everything is crashing and I don't know why?
Operating System
Windows 7 Ultimate (x64) Service Pack 1 (build 7601)

Processor
3.20 gigahertz Intel Core i5-3470
128 kilobyte primary memory cache
1024 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded

Board:
Gigabyte Technology Co., Ltd. H77M-D3H
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. F5 03/29/2012

RAM:
Slot 'ChannelB-DIMM0' has 8192 MB

Display:
NVIDIA GeForce GTX 660 [Display adapter]
Samsung SyncMaster [Monitor] (24.0"vis, s/n YCUYHVDZ702086, July 2010)

Audio:
NVIDIA High Definition Audio
VIA High Definition Audio
 

Answer:Windows 7: "Program" has stopped working"?

14 more replies
Relevance 89.79%

Hi all

Our firm has recently upgraded from Outlook 2002 on XP SP1 to Outlook 2003 on XP SP2. We have noticed an increase in the number of "Not found" messages that people receive when trying to send an email/appointment containing an attachment(s). These attachments are inserted via 'Insert menu --> Item', then selecting another email.

I have searched MS Support website and google'd it, but no joy.

Has anyone else seen this issue before? Do you know what the fix is please?



Thanks
Scott
 

Answer:"Not found" when sending Outlook 2003 attachments

How about just dragging and dropping the file into the message?
 

3 more replies
Relevance 89.79%

My Outlook Express opens and immediatly starts sending messages and won't recieve unless I hit stop and then click recieve. If I let it go on sending it takes forever then ends in error. I suppose that there must be a way to delete the outgoing message, whatever it may be, so Outlook won't keep trying to send it every time I open Outlook Express. If anyone can help me I'd appreciate it. My os is Windows xp home edition. Thanks, Mike.
 

Answer:Solved: Outlook Express won't stop "sending"

Hi urdmann

Welcome to Tech Support Guy Forums!

For Windows XP:
Enable: Hidden files and folders:
Open My Computer,
Tools > Folder Options > View tab,
under Hidden Files and Folders,
verify Show Hidden Files and Folders is selected.
uncheck Hide Extensions for known file types
Apply, OK, to save and close.

________________________________________________________________

Start > Search > For Files or Folders
All Files and Folders
key in:
.dbx
Look in: Local Drives
click the arrow for More Advanced Options
place a checkmark in:
Search System Folders
Search hidden files and folders
Search subfolders
Click Search
Locate the Outbox.dbx file and rename it Outbox.old
Or just delete the Outbox.dbx file, Outlook Express will create a fresh new one.

You can also configure Outlook Express to NOT Send/Receive at startup.
Tools > Options > General tab
Uncheck: Send and receive messages at startup
Apply, OK, to save and close.

Let us know what happens.
 

3 more replies
Relevance 88.97%

When I run Outlook 2010 and send an email from within the program it will always send it instantly once I hit "Send.'

However, when I click the emails links on the "Contact Me" sections of a website that loads just a blank email I can type in and click send, I noticed that it doesn't send it immediately if Outlook was not already open. I have to manually load the main Outlook app and you'll see that it has saved the message in the "Outbox" and THEN it will send it once it receives the auto-send command once the app starts up.

This could be problematic if I need to send an email via a web link immediately and forget to load Outlook to actually send it. It could potentially sit in the "Outbox" all day.

Any thoughts?
 

Answer:Outlook Sending "Sent" Emails To Outbook?

I don't know of any way to change that; Outlook has always been acting this way.

I have Outlook open all day long, so this has never been a problem for me.
 

2 more replies
Relevance 88.97%

Outlook has begun trying to send three phantom messages during send-and-receive, which don't exist in the outbox. I always cancel it, because it seems likely to be some kind of malware, but neither AVG or Avast free antivirus programs have been able to capture it.

Does anyone recognize this symptom, or know what the cause might be?

I'm using Outlook Office Basic Edition 2003 on Windows XP Home.

Thanks in advance for any help!
 

Answer:Outlook "Sending 1 of 3" - but outbox is empty!

This probably isn't a malware issue so moving to Software Forum.

This happens when a read receipt gets stuck. Try working through this link.

http://www.outlook-tips.net/howto/delete_rr.htm
 

8 more replies
Relevance 88.97%

When going to my email in Outlook 2003, I get a message saying that I have one message to be sent, which I don't, and it keeps flashing the same message. Is there a way to clean this so I won't continue to receive this message?

Thanks,
Cougarone
 

More replies
Relevance 88.97%

Hi everyone,
This is my first post so hope it goes ok.
When I open Outlook, I have it on automatically send/receive. Just lately I've noticed it sending e-mails and I have no idea what they are.
When I look in the send window there is nothing there that shouldn't be.
Does anyone know what these "phantom" e-mails are and if they pose any threat?

Thanks in advance

BourneGooner
 

Answer:Outlook sending "phantom" e-mails

sounds like a virus or spyware .why don't you run a free panda on line scan. it will tell you what you have and then you will have a idea which forum to post in.
http://www.pandasecurity.com/homeus...5D4-4DA2-B310-B1DBEC2971F2}&NRCACHEHINT=Guest
 

2 more replies
Relevance 88.97%

Here's some info:

I use Outlook.com as my email provider.
I have a web address - [email protected]

When someone sends an email to [email protected], the website automatically forwards it to the [email protected] address. I have added the address in Outlook.com as an alias, which enables me to send email as [email protected] - to the recipient, they cannot see I use outlook.com as my interface.

I have a subscription to Office so want to start using Outlook the program to handle my email (from various accounts). I know there is the Windows 10 Mail app but it isn't that great and is a little slow to sync.

I know there was a system to set outgoing email to send that through my web server, and thus it wouldn't send "on behalf of", but is there a way to do this with Outlook the program?

Thank you

More replies
Relevance 88.15%

I have used "Data Execution Prevention" (DEP) listing my ACDC file viewer. I listedACDC because after it completes normally each time, there is an error message that says "Application has stopped working." I no longer want to see this error message.I use ACDC 7 for viewing and editing graphic files, here with this Windows 7 (64) system.

I usually select files with Windows Explorer, and they open using ACDC.

When I close the last file viewed, I get this error message that says "ACDSee 7.0 Application has stopped working"Installations of this ACDC on other Windows 7 computers do not have this issue. So I need to resolve it.

More replies
Relevance 88.15%

My question involves Ďrulesí in Outlook 2002. Even if you donít have 2002 I doubt it would make a difference. Anyhow, I have two e-mail accounts in my Outlook program. I have many rules set up for each e-mail account. This is what Iím trying to doÖ

Any e-mails sent to: [email protected], move them into [email protected] folder. Then once they are in that folder, I want the other rules to apply and move into other sub folders, given a rule applies to them.

Now, my problem is that when I receive an e-mail, I receive the e-mail in folder [email protected] and the sub folder it should be going into. So basically two copies of the e-mail.

:::lol::: Reading over this, Iím sure none of this is making any sense to you. Let me try explaining this a better way. Seeing how I have two e-mail accounts in Outlook 2002, all the new e-mails I will receive will default and go into my inbox. Well obviously, I want the e-mails from each account to remain separate. So I created folders, that are named after that specific e-mail address. Thatís basically where I want them to default to, but my only way of doing this is creating a rule for it. Which seemed fine.

But, seeing how once they are in their own folders, I then want other rules to apply to the e-mails and then move them off into sub-catagories. Well when I have all these rules working, I receive one e-mail in the e-mail folder specific to that e-mail address, and then another rule takes over and appli... Read more

Answer:Outlook 2002 "Rules"

Can't you apply all of these rules in the Inbox instead of the relevant [email protected] folder? So instead of it going from the inbox to [email protected] to [email protected]/xxx it would go straight from the inbox to [email protected]/xxx.

Would that work?

Spu
 

1 more replies
Relevance 88.15%

My question involves Ďrulesí in Outlook 2002. Even if you donít have 2002 I doubt it would make a difference. Anyhow, I have two e-mail accounts in my Outlook program. I have many rules set up for each e-mail account. This is what Iím trying to doÖ

Any e-mails sent to: [email protected], move them into [email protected] folder. Then once they are in that folder, I want the other rules to apply and move into other sub folders, given a rule applies to them.

Now, my problem is that when I receive an e-mail, I receive the e-mail in folder [email protected] and the sub folder it should be going into. So basically two copies of the e-mail.

:::lol::: Reading over this, Iím sure none of this is making any sense to you. Let me try explaining this a better way. Seeing how I have two e-mail accounts in Outlook 2002, all the new e-mails I will receive will default and go into my inbox. Well obviously, I want the e-mails from each account to remain separate. So I created folders, that are named after that specific e-mail address. Thatís basically where I want them to default to, but my only way of doing this is creating a rule for it. Which seemed fine.

But, seeing how once they are in their own folders, I then want other rules to apply to the e-mails and then move them off into sub-catagories. Well when I have all these rules working, I receive one e-mail in the e-mail folder specific to that e-mail address, and then another rule takes over and applies i... Read more

Answer:Outlook 2002 "Rules"

One rule per *variable*. Don't use a rule to move it to folder X, then another to move it to folder X-1. Just create a rule to move it to folder X-1.

Does that make sense?

At this point, seems you could remove the rules to move it to folder X.
 

1 more replies
Relevance 86.51%

Title is supposed to say that it is NOT animated.

I recently purchased a Dell Studio 1737 direct from Dell.

Every time I turn on my laptop and log into my account, there would be a blue, animated circle cursor indicating that the laptop was just turned on and that it is working in the background.

Later on however, I noticed that whenever there were programs working in the background, my cursor shows a blue circle with a light in it, but it wouldn't be animated. This usually happens about 15 minutes after the laptop has turned on. I'm assuming that the cursor SHOULD be animated just like how it was during start-up.

I tried switching the pointers (eg. aero large to aero regular) and it seemed to solve the problem (i think), but after a while, the circle becomes frozen again; I am faced with the same issue. I tried downloading and installing different cursor sets (from DeviantART), and the ones that WERE animated in ANYWAY, were also frozen after a couple minutes.

I'm wondering if anybody else has had this problem and would greatly appreciated it if they provided a solution.

I'm using a 64-bit 7 Home Premium with ATI Radeon HD 3650.

Thanks in advance!

Answer:Windows Vista/7 "Working In Background/"Busy" Cursor NO

  
Quote: Originally Posted by Andresu


I recently purchased a Dell Studio 1737 direct from Dell.

Every time I turn on my laptop and log into my account, there would be a blue, animated circle cursor indicating that the laptop was just turned on and that it is working in the background.

Later on however, I noticed that whenever there were programs working in the background, my cursor shows a blue circle with a light in it, but it wouldn't be animated. This usually happens about 15 minutes after the laptop has turned on. I'm assuming that the cursor SHOULD be animated just like how it was during start-up.

I tried switching the pointers (eg. aero large to aero regular) and it seemed to solve the problem (i think), but after a while, the circle becomes frozen again; I am faced with the same issue. I tried downloading and installing different cursor sets (from DeviantART), and the ones that WERE animated in ANYWAY, were also frozen after a couple minutes.

I'm wondering if anybody else has had this problem and would greatly appreciated it if they provided a solution.

I'm using a 64-bit 7 Home Premium with ATI Radeon HD 3650.

Thanks in advance!


Hi and welcome

How much ram? can you take a screen shot of task manager (right click task bar) in teh performance tab. to get to task manager right click task bar

Thanks

Ken J+

7 more replies
Relevance 86.1%

Fix for "Tuner Not Found" error and "Receiver service has stopped working" error listed in next post! --†Errors I'm receiving: "Tuner Not Found""Windows Media Center Receiver Service has stopped working.""Welcome - An upgrade is currently in progress."SpecsIntel P4 3GHz2GB RAMVisionTek Radeon X1300Hauppauge WinTV PVR-150 PCI IIWindows 7 32bit1. Tuner Not FoundOkay, the entire install went without a hitch. On opening Media Center I was told that I needed to setup Live TV. When I click the link I was given the dreaded "The TV signal cannot be configured because no tuner hardware was detected." If I run WinTV from Hauppauge I can view TV just fine.MCE ran fine this morning on Vista SP1 before the install.For the tuner issue I have done the following:-Reseated the card-Updated the drivers-Uninstalled the hardware and rescanned/installed the hardware and drivers-All Windows Updates-Uninstalled all references to Hauppauge on the machine and installed JUST the drivers, no Hauppauge software-Adjusted Log On preferences for Windows Media Center services to Local and manually started ehrecvr and ehsched along with cmd line manual starts-Downloaded new codecs from WinDVD and MSFT-Run the WMC Decoder Checkup Utility from MSFT and changed to Miscrosoft DTV-DVD Video Decoder (the utility recommended I change to this -- only one that is MCE compatible -- but once I did it told me that it is incompatible with sync on WMP10 and that... Read more

Answer:*RESOLVED* Media Center "Tuner Not Found" error, "Receiver service has stopped"

Okay, I resolved the first two issues, Tuner error and ehrecvr error.It had to do with multiple Admin user accounts on my computer. My computer was originally set up with a user Robert Baker with full privileges as administrator. I then also set up a MediaCenter account with full privilidges. For whatever reason the MediaCenter account has access to EVERY action on the computer except starting the ehrecvr service.1.† First set Media Center Service Launcher to log on at NT Authority††† Services > Right-Click Windows Media Center Service Launcher > Properties > Log On tab > Log On As 'This account: ' > Type " NT AUTHORITY/LocalService " > Click Apply > General tab > Start service.2. I then set the Media Center Scheduler Service AND Media Center Receiver Service to log on as my other admin account. Same as above but with other account credentials and started the services.3. Reboot and no ehrecvr errors. Since this was a good sign I tried WMC and was able to set up my TV fine.I STILL, however, get the "Upgrade in progress" message when I open Media Center. Anyone know how to fix that? I've run setup again and can't get rid of it.

19 more replies
Relevance 85.28%

I updated to Google Earth 4.3 earlier today but now if I try to open it I get an error message saying that 'DirectX' mode not supported.
It gives 4 fix suggestions:
1) Set color depth to 'True Color' (32 bit) in display properties
2) Start Google Earth after waiting a minute
3) Close other applications (particularly if they use 3D)
4) Download and install DirectX9.0c or above by following the link

Here's what happened:
1) I already had it set to 'True Color' (32 bit)
2) Tried starting after a minute - same as before
3) No other applications were open
4) Downloaded DirectX as per instructions

I still get the same error message. I found from Googling that it might be a problem with the graphics card/drivers. I think the graphics card is a SiS AG200T8-64 ( I hope I got that right!). I went into the advanced tab in the display properties and asked it to search for an updated driver, it put on version 6.13.0010.3030

This also makes no difference to opening Google Earth though.
Does anyone have any suggestions?

Thank you

Jenny

More replies
Relevance 85.28%

Since yesterday when I try to launch several applications they don't work and show "... has stopped working" error message. They had been working perfectly before. I didn't change or install anything. They just stopped working.

So far I found these apps not working:
DS3_Tool.exe
LANoirelauncher.exe
FIFA13Demo.exe
Xbox 360 Controller Manager.exe

I reinstalled every aplication several times, also reinstalled .NET Framework, graphics drivers, scanned whole pc with KIS 2013, CCleaner, jv16 Power Tools and performed a SFC Scan. Didn't help.

I can't also install SF Diagnostic Tool. The following error message appers:
"This tool will collect the logs files required to troub has stopped working"

Does anyone know how can I fix this? Any help would be greatly appreciated.

Thanks & Greetings.
Kani

Answer:"has stopped working" on starting apps ;can't install SF Diagnost Tool

Welcome aboard.

Do a System Restore to a point earlier than yesterday? It may work.

9 more replies
Relevance 85.28%

My win 10 computer has just started giving me the above error code.
I can log in using mouse & keyboard, but when I get to the start screen I get the above error code 0XC000021a.

I have tried several times to do a fix, like shutting off the power supply, rebooting, waiting etc.

Any solutions out there?

I am sending this Email on my Win 8.1 desk top.

Tully

Answer:Error code 0XC000021a "Keyboard & Mouse stopped working"

Can you boot in Safe Mode?

5 more replies
Relevance 85.28%

Hi

I am running Windows 7 Pro 64-bit on a Lenovo T510.

Every single time I do a Properties on My Computer, I get this pop up message that "Windows Control Panel has stopped working". Oddly, I just cancel that window and everything otherwise seems to work normally. But it happens every time and I can't figure out why.

Anyone else experience this?

Thanks

Answer:"Windows Control Panel has stopped working" on My Computer Properties

Hi

This usually happens when you dont remove the software completely, some process are attached to the Windows Explorer ... thats causing this.

Try using Autoruns and look under Explorer... and look for file that highlighted in yellow.. usually should say "File not Found". Uncheck or delete these and restart you computer.

Try these and let me know.

9 more replies
Relevance 85.28%

For some strange reason the play all button in all of my mp3 file folders ceased to function. The songs play fine by any other method. Any clue as to why this would occur? Thanks.
 

Answer:XP music folder "play all" feature suddenly stopped working?

Did you just install/uninstall another media player, or change any settings in Windows Media Player?
 

11 more replies
Relevance 85.28%

I have a couple of laptops with Windows 10 Pro running version 1511 where I've set the Defer Upgrades option in Advanced Options.

I've nothing against 1607, but I tend to have full disks and hadn't got round to freeing up the necessary disk space and also doing the full backup image which I like to do before upgrading.

Both laptops have today started trying to download version "Feature update to Windows 10, version 1607".

Has the timescale on that Defer Upgrades option run out?

Edit: I should probably have posted this over in Windows Updates and Activation- my mistake!

Answer:"Defer Upgrades" option has stopped working for 1511 Win10 Pro

I would say the time delay has run out. If you click the learn more under defer upgrades you get this.

Windows Update - Defer Upgrades in Windows 10

Defer upgrades in Windows 10

Some Windows 10 editions let you defer upgrades to your PC. When you defer upgrades, new Windows features won?t be downloaded or installed for several months. Deferring upgrades doesn?t affect security updates. Note that deferring upgrades will prevent you from getting the latest Windows features as soon as they?re available.

1 more replies
Relevance 85.28%

Microsoft has fixed the "Launcher_Main.exe has stopped working" error (Logitech Webcam) that occurred when using the Logitech Software. The issue was caused when Microsoft originally removed support for compressed MJPG and H.264 streams for webcams with the launch of Windows 10 Anniversary Update.

Cumulative Update KB3194496 for Windows 10 PC Build 14393.222 restores full functionality of the Logitech Webcam & software.

More replies
Relevance 85.28%

Hello all. I hope this is the right place to post this support thread.

I am trying to install Open Office, but every time it is crashing during the installation process. This has happened the same way for three different .exes from their website - 4.1.1 en-GB, 4.0.1 en-GB, and 4.1.1 en-US.

I run the .exe, click next on Installation Preparation, select a location to unpack the files, and it extracts them. Once it reaches the Installation Wizard window, it works on 'Computing space requirements' for a second or two, and then crashes, saying "Windows(R) installer has stopped working".

I have looked around a couple of help threads, and tried a few things. I have been into regedit, but there was nothing except '(default)' under HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\ SQMClient\Windows\DisabledSessions. I ran 'sfc /scannow' in the command prompt, but got "Windows Resource Protection did not find any integrity violations". Can anyone suggest a fix? Thank you

Answer:OpenOffice install crash - "Windows(R) installer has stopped working"

While not a solution to fix your problem, here is something you could try to get a free Office suite.

I have Libre Office Portable, similar to Open Office, and the portable version doesn't install Libre Office.
If you're interested, it's available here:
LibreOffice Portable | PortableApps.com - Portable software for USB, portable and cloud drives

3 more replies
Relevance 85.28%

I've got a fully patched version of Windows 7 Professional.

When I'm running Windows Update, I get to the window that lists the updates that are available, e.g. "3 optional updates are available, 2 important update are available," or whatever.
If I then click on one of those links to get a list of what the updates are, Windows Explorer crashes. Every single time. It gives the message "Windows Explorer has stopped working."
I have tried running in Safe mode, except Windows Update doesn't run in Safe mode so that's no help.
I've tried setting up a clean boot. That didn't help.
I've scanned for viruses with a couple of different anti-virus/malware products. Nothing found.
I've run sfc /scannnow. It found no errors.
Any other ideas?

More replies
Relevance 85.28%

For about the past 3 month I have started to see fairly frequent app crashes with the "application has stopped working error". It appears this started the week of 4/8 (from what I can tell via Reliability Monitor.)

Here are some of the applications that have been affected:
Zune.exe
wlmail.exe
Microsoft intellipoint
Windows Desktop Gadgets
Skype
ehshell.exe

I did not make any major system/application changes (besides plugging in a new wireless keyboard temporarily)

My system is a Dell XPS 420 running Windows 7 Ultimate x86 (about 4 years old). OS runs on a 100GB SSD that was clean installed about 22 months ago.

Trying to find out if there is some larger issue mounting. Any help or guidance would be greatly appreciated.

Thank you!

Answer:Frequent "application has stopped working" error messages -Win7 x86

Device Concerns:
Code:
XPS MiniView USB\VID_BEEF&PID_0006\AAAAAAAAAAAAAAAAAAAA This device is disabled.
Was the above intentional? If so, please explain your troubleshooting steps.
Analysis:Your crashes all seem to stem from the same source:
Code:
Event[2162]:
Log Name: Application
Source: Application Error
Date: 2012-07-05T15:14:38.000
Event ID: 1000
Task: Application Crashing Events
Level: Error
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: MediaCenterSSD
Description:
Faulting application name: ipoint.exe, version: 8.20.468.0, time stamp: 0x4e320b14
Faulting module name: ipoint.exe, version: 8.20.468.0, time stamp: 0x4e320b14
Exception code: 0xc0000005
Fault offset: 0x000ab79e
Faulting process id: 0x820
Faulting application start time: 0x01cd5ac4c65b5408
Faulting application path: C:\Program Files\Microsoft IntelliPoint\ipoint.exe
Faulting module path: C:\Program Files\Microsoft IntelliPoint\ipoint.exe
Report Id: 0bac771a-c6de-11e1-affa-00222cffffff
See if re-installing your Microsoft Mouse software resolves your problems. First, uninstall the software through Start Menu -> Control Panel -> Uninstall a program. Then download the latest version of the software if you can. If it is not available for download, use your disc that came with your mouse. Install the software fresh.

My understanding of the information given in your logs came from Microsoft IntelliPoint Readme and Release Notes. Good luck!

3 more replies
Relevance 85.28%

At some point in the last three months, a number of machines have stopped being able to add new USB devices.


These can be USB headsets, mass storage devices, anything. This includes devices which previously have installed fine and been working without issue.
In device manager, the devices show as "No drivers are installed for this device". However, if you click update drivers, and then manually select the Mass Storage (for example), you can install the device without a problem.
This has nothing to do with any vendor specific drivers - This is a Windows 7 issue.

Has anyone seen anything similar?
Is anyone aware of a recent update that may have had an impact on the USB stack or the operation of PnP?
Any other ideas?

Cheers

More replies
Relevance 85.28%

Hello,
I problem I have been geting in the past 2 days is that whenever I use the search index, like for example look in my librarys, program files, or look for anything on my computer, a box pops up saying "Windows explorer has stopped working", and whatever im searching for will automaticaly close. This is very frustrating because like everyone who owns a PC I search for files and such, and I have tried many things to try and fix this, including:

-System restore
-Uninstalling windows updates
-Restarting computer
-Disabeling Index service
-Disabeling Windows search service

I have read of a solution to this problem that involves deleting files related to the index, but again I cannot do this because every time I look in search index it automaticaly closes.

Any help on this issue would be greatly appreciated

Answer:Search Index "Windows explorer has stopped working" error

Try to do system file check first:
Start-->cmd (run as administrator)-->sfc /scannow (space between sfc and /)

If it does not work
Try a scan disk.
Disk Check

If it doesn't work, you might want to do a Repair Install , it will preserve your data, user account, and system driver

2 more replies
Relevance 85.28%

My Maps app that came with Windows 10 no longer works in Aerial view. It's just blackness with my location dot in the middle. The blackness remains, even when I pan and zoom, but the road/normal layer works fine. I have the most current & up to date OS, Win 10 Home, 10586.36 & new Dell laptop.

Answer:"Aerial" view stopped working in Bing/Windows Maps app

(Screenshot)

1 more replies
Relevance 85.28%

I work remotely through an F5 VPN with RSA dual authentication.  Once inside the firewall and into the intranet, I run RDC and connect to my work computer.  This has worked without fail for a year, but a couple of days ago, even though I VPN in
with no trouble and have access to other features and locations within the company's intranet, when I click Connect on the RDC dialog box, I get "An Internal Error has Occurred."  If I try "edit" on the RDC, it shows my internal userID
and asks for my pwd.  Then it gives me the same Internal Error message.  It doesn't seem to find the computer through RDC even though ping and tracert do see it. I spent hours on the phone with company tech support and they assured me the remote
box is on and they were able to remote into it.  I can also ping and tracert the remote box while VPN is active - I just can't connect.  No changes have been made in any configuration since it was set up over a year ago.
I need ideas on how to debug this as it seems to be on my home client machine.  Are there any diagnostics or tools I can use to try to find the problem?  I need this ASAP to be able to work.

More replies
Relevance 85.28%

Hi there,
I am getting a repeated "Windows Module Installer has stopped working" message which says that the file that describes the problem is:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_TrustedInstaller_5480538538f23ac44dfcd994b 3e5d340663098_cab_670b9c43\WER9B8A.tmp.hdmp.

Windows Update hangs and gives no error message but says no Windows Updates have been carried out (ever). Have tried to run SURT but it just hangs on the first step, searching for updates (left it for 3 hours or so). SFC Scan gives error message "Windows Resource Protection could not start the repair service". I attach CBS folder.

Be very grateful for any help.

Best
Miguel

Answer:"Windows Module Installer has stopped working" message constantly

There's a fairly critical error in the last CheckSUR that ran -

Code:
(f) CSI Payload File Corrupt 0x00000000 cmiv2.dll amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f
this file is central to the servicing capabilities of Windows, so the fact it's missing may be causing all your other problems.

The CBS log however is more interesting.
SInce early November, almost the only activity recorded has been repeated installations of the same software at boot.

Code:
2013-11-17 10:28:44, Info CSI 00000006 IAdvancedInstallerAwareStore_ResolvePendingTransactions call 1 loaded 8 pending advanced installer operations
2013-11-17 10:28:44, Info CSI 00000007 Begin executing advanced installer phase 8 index 0 (sequence 0)
Old component: [l:0]""
New component: [l:0]""
Install mode: uninstall
Installer ID: {51d813ef-83f1-42de-a2ee-89ee4633a7c9}
Installer name: [25]"RegistryKey SD Applicator"
2013-11-17 10:28:44, Info CSI 00000008 End executing advanced installer (sequence 0)
Completion status: S_OK
One or two people have reported uninstalling .NET 4 for a while, then reinstalling it solves this problem - it's certainly worth trying.

Uninstall it from the Programs listing reboot, then run the cleanup tool from here...
.NET Framework Cleanup Tool User's Guide - Aaron Stebner&#39;s WebLog - Site Home - MSDN Blogs

Reboot ... Read more

9 more replies
Relevance 85.28%

Hey i have installed Windows Server 2008 64bit (very similar to Vista x64)

now i have installed all the usual crap, such as .net 3.5 sp1, directx n all the updates/patches n watnot

but certian things, naimly skype, realmcrafter, GTA IV and a few others just come up with This program has stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: Skype.exe
Application Version: 3.6.32.244
Application Timestamp: 2a425e19
Fault Module Name: StackHash_1703
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 74100e40
OS Version: 6.0.6001.2.1.0.274.10
Locale ID: 2057
Additional Information 1: 1703
Additional Information 2: 2264db07e74365624c50317d7b856ae9
Additional Information 3: 1344
Additional Information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

PLEASE HELP, i have nearly distroyed my pc allready & i can't afford another 1 at the moment. i have no clue what i'm doing wrong & i have never had this problem before
 

Answer:Tuns of "Stopped working" errors on different apps, clean install HELP!

Have you used Vista home premium on the machine before?
 

1 more replies
Relevance 85.28%

Clean install of Vista Business on a new HD, Dell 8400 w/2.5GB memory.

I keep getting a dialog box that pops up and says:

"Microsoft Windows
Host Process for Windows Service stopped working and was closed.

A problem caused the application of stop working correctly. Windows will notify you if a solutiion is available."

There doesn't appear to be any rhyme or reason for it... it just arbitrarily shows up from time to time. It's not related to booting Vista, I don't think, b/c it'll pop up occasionally during the same session.
 

Answer:"Host Process for Windows Services stopped working and was closed."

9 more replies
Relevance 85.28%

Hello Everyone,

I've never seen this problem with the previous O.S., Windows 7, but Windows 10 is throwing me this error message approximately 70% of the time when I run the network troubleshooter...either from the Control Panel, or by right clicking on the task bar's connection icon.

Though Win10 is the first O.S. to give me this error, the Microsoft support forums indicate that it's been fairly annoying to Windows 7 users back to 2010. Also, Microsoft support employees just give vague general tips for trying to nail down the cause.

I'm only experiencing this in EDGE. Edge sometimes freezes on a webpage when I'm attempting to post a message to a forum, similar to what I'm doing now. I run the Network Troubleshooter and get the "Native Host Has Stopped..." error. I open a new Edge tab, come to this forum and try to do a search for the answer, but this forum's search function ignores my input. So, I opened IE-11, navigate to Win10 forum, and all works well.

Rather than go through their pages of discussions, I'll simply ask members of this top notch forum if you have experienced the "Scripted Diagnostic Native Host has Stopped Working" error when running the network troubleshooter? And, how did you fix it? Thanks in advance for your feedback.
-Allen

Answer:Error: "Scripted Diagnostic Native Host has Stopped Working"

Greetings,

I have the same problem. NEVER saw this before the Win10 upgrade. Just started searching for a solution and found this thread.

2 more replies
Relevance 85.28%

I know this issue has been brought up before, but I am unable to solve the problem following the below solution -

Index - Windows Search Service

I am using a Vista Home Premium 64 bit computer, and when I try to do this solution the computer tells me that I am unable to get access to the folder C:\ProgramData\Microsoft\Search\Data\Applications\Windows. It says "You don't currently have access to this folder", and when I click "Continue for access" nothing happens.

This problem is plaguing me and I would love to have it resolved.

Thank you for helping.

Answer:"Microsoft Windows Search Indexer Stopped Working" Issues

Although this is for a file, use it to take ownership of the folder: Take Ownership of file

If other problems occur, then I'd have to wonder if you're infected.
Try this:





Please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks

1 more replies
Relevance 85.28%

Hello, this is my first post here on this forum.
About a week or two, I Downgraded my Computer (Dell l502x) from Windows 8 to Windows 7 Ultimate 64 Bits, installed the drivers from the Dell Page, and everything worked good, except for the Realtek HD Audio Driver Version 6.0.1.6312 (Recommended for my PC on Dell Website), This is the problem:
When I Start my computer, a message shows up with the following error: "Realtek HD Audio Manager has stopped working" and then, I Have to close the message and open Realtek HD Audio Manager again from the Control Panel. I Have already tried re-installing Windows and the error keeps appearing After I Install that driver, I Was wondering if maybe that version of the driver is faulty or something (It would be weird, since it's the one Dell recommends for this computer on the page)
I Have visited many forums, including this one looking for a fix to this issue, but I have not found a solution yet. So I was wondering if someone had this issue before and has a solution to this annoying problem.
any Help would be appreciated, Thanks.

Here's a picture of the issue im having when I start Windows 7 (It's in Spanish, but I think you will understand it)

Answer:"Realtek HD Audio Manager has stopped working" at Windows Startup

Try the R275 version on the RealTek site. Its the latest version and will work on your PC. When you run the Realtek installation the first thing it will do is uninstall the current version you have installed and then restart the PC. After the restart it will continue and install the R275 version. This is the version I have on all my PC's for both Win 7 64 bit and Win 8 64 bit.

Download the High Definition Audio Codec R.275 64 bit OS version.
Realtek

BTW, here is the info on posting screen shots on this forum. You con't have to upload them to a host.
Screenshots and Files - Upload and Post in Seven Forums

2 more replies
Relevance 85.28%

Microsoft has fixed the "Launcher_Main.exe has stopped working" error (Logitech Webcam) that occurred when using the Logitech Software. The issue was caused when Microsoft originally removed support for compressed MJPG and H.264 streams for webcams with the launch of Windows 10 Anniversary Update.

Cumulative Update KB3194496 for Windows 10 PC Build 14393.222 restores full functionality of the Logitech Webcam & software.

More replies
Relevance 85.28%

Hey guys,

First let me thank you all who dedicate many hours to helping this community. My laptop is much slower than usual, and even though I can access the internet through Firefox the IE error message pops up every 5 min or so. Please help. I have included a HJT log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:02:19 AM, on 1/7/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\Program Files\TOSHIBA\Power Saver\TPwrMain.exe
C:\Program Files\TOSHIBA\SmoothView\SmoothView.exe
C:\Program Files\TOSHIBA\FlashCards\TCrdMain.exe
C:\Program Files\TOSHIBA\ConfigFree\NDSTray.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Apoint2K\Apoint.exe
C:\Program Files\ltmoh\ltmoh.exe
C:\Windows\System32\ThpSrv.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\Zune\ZuneLauncher.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\TOSHIBA\TOSCDSPD\TOSCDSPD.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Common Files\InstallShield\UpdateService\ISUSPM.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Apoint2K\ApMsgFwd.exe
C:\Program Files\Protector Suite QL\psqltray.exe
C:\Windows\ehome\ehmsas.exe
C:\Program Files\Apoint2K... Read more

Answer:"Internet Explorer has stopped working" repeated message, HJT log included

8 more replies
Relevance 85.28%

I'm getting this problem on a desktop running Windows 7 and on a laptop running Vista.

On the Win7 system (on which I'm typing this,) I'm getting the "Windows Explorer has stopped working" and "Windows Explorer is restarting" message pair every time I try to open any program from the desktop (such as MalwareBytes, Spybot, IrfanView, anything,) using right click and "Run As Administrator." They'll open and run normally if I do the ordinary left-click, or if I right-click and "Run As Admin" from the Start menu.

On the Vista laptop it's less consistent and seemingly not dependent on the right-click/Admin selection. On vacation I tried to download and run Verizon's VZAccessManager software - so as to use my ancient flip-phone as a tether - and couldn't get the system to detect the phone ("A wireless device was not detected!" is the message I would get.) After attempting multiple tweaks with the assistance of Verizon Tech Support via that phone, he came to the conclusion that I've got a problem with the system - something running on it that shouldn't be there.

On both systems there's also been a marked delay time in program initiation (when they start at all,) and running the usual malware/spyware detection programs such as MalwareBytes, SuperAntiSpyware, Spybot S&D, etc., comes up empty; the same with virus scans.

Though the coincidence suggests a connection and that it&#... Read more

Answer:"Windows Exporer Has Stopped Working" (repeatedly, on two separate systems)

'Coming up on three weeks and still getting Windows Explorer restarts every time I try to open a program from the desktop. Any advice?
.
 

1 more replies