Computer Support Forum

Fixed Length in Excel

Question: Fixed Length in Excel

Not very fluent in Excel. I am setting up a positive pay format for my company to transfer check information from my PC to a bank via an ASCII Flat-File. Question is, I have so many columns that need to be set at 10 characters fixed length.

Is there way for this to be done? Example if I key in a check for $1.95

I want it to automatically put it as 0000000195.

Can this be done?

Thanks

Relevance 100%
Preferred Solution: Fixed Length in Excel

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Fixed Length in Excel

6 more replies
Relevance 85.69%

Excel has a limitation of 240 characters when saving a file as .PRN. I need to create an ASCII file of greater record length with multiple records.How can I do this? Is there an Excel workaround or will I have to use another program? Will Access allow me to do this?Thanks for any assistance in advance.Squeals

Answer:ASCII fixed length files in Excel

You MIGHT be able to do this using a macro click here

2 more replies
Relevance 65.6%

Comp shut down on me yesterday. No blue screen, just restarted. Went about my business and it happened again, but this time I had this thing pop up yesterday saying I was infected (under taskbar, NOT the net).. So I didn't click on it. Just shut the WLAN off. Windows security center popped up saying I was under attack. (Also under task bar).. Didn't touch anything.

I couldn't do anything. Was trying to shut stuff off when the screen went black with a warning that I was under attack. Restarted to see what I could do and it shut down again (3rd time.) Started in safemode and it was running fine so I did two scans. one MWB scan and another Microsoft Security Essentials. MSE only found one file, Malwarebytes didn't find anything.

Usually when they don't find anything you can find some suspicious files under Msconfig > Startup and trace the item and delete it. Did that and couldn't delete a couple things, so I shut it off in MSconfig and startup (restarted), so it disabled it and was able to delete the files. Restarted > Safemode > MSCONFIG > Startup and ANOTHER one was showing as active. This time the warnings popped up again. :eek2: Got it just in time before it shut me down again.

Did the same thing again, traced and deleted sections until the file was gone. Restarted, scanned twice again, CHKDSK, and CC Clean. Here I am.

Got it. Prolly some lingering files, but I can't get that one out of the startup menu. It was some "AivL virus scan&q... Read more

Answer:Just fixed a NASTY virus on Laptop [length]

Combo fix log.

ComboFix 11-02-17.02 - Richard 02/18/2011 8:29.4.2 - x86
Microsoft? Windows Vista? Ultimate 6.0.6002.2.1252.1.1033.18.2814.1370 [GMT -5:00]
Running from: c:\users\Richard\Downloads\ComboFix.exe
AV: Microsoft Security Essentials *Disabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
SP: Microsoft Security Essentials *Disabled/Updated* {ABEC4DA7-E46C-2F39-81B5-AA334E5D1BDD}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.

((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))
.

c:\programdata\Desktop
c:\windows\system32\twunk_32.exe

.
((((((((((((((((((((((((( Files Created from 2011-01-18 to 2011-02-18 )))))))))))))))))))))))))))))))
.

2011-02-18 13:35 . 2011-02-18 13:35 -------- d-----w- c:\users\Richard\AppData\Local\temp
2011-02-18 13:35 . 2011-02-18 13:35 -------- d-----w- c:\windows\system32\config\systemprofile\AppData\L ocal\temp
2011-02-18 13:35 . 2011-02-18 13:35 -------- d-----w- c:\users\Public\AppData\Local\temp
2011-02-18 13:35 . 2011-02-18 13:35 -------- d-----w- c:\users\Default\AppData\Local\temp
2011-02-18 04:01 . 2011-02-18 04:01 28752 ----a-w- c:\programdata\Microsoft\Microsoft Antimalware\Definition Updates\{769D7F85-97CA-424C-BFFF-760DB758CE2E}\MpKslf95b8bfa.sys
2011-02-18 04:01 . 2011-01-13 09:41 5890896 ----a-w- c:\programdata\Microsoft\Microsoft Antimalware\Definition Updates\{769D7F85-97CA-424C-BFFF-760DB758CE2E... Read more

3 more replies
Relevance 64.37%

I have been asked to create a fixed length logical addressing map to allow for the potential of 6 subnets.

All internal interfaces use the 192.168.11.0 network.

using the following table:
https://docs.google.com/open?id=0B1lQ7u8ECu-hRldlb2hUZG02THM

any ideas?

thanks
 

Answer:create a fixed length logical addressing map to allow for the potential of 6 subnets

Lol... I think we've had this one already. Another student needing help?
 

7 more replies
Relevance 58.22%

So im using Excel 2010, and i making a timetable.

Right now the row going across saying period 1 2 3 they are all different sizes, some will be bigger and some would be smaller. I was wondering if there is a way to make them all the same size.


If you dont know what im talking about ask for a screenshot.

Im to busy to upload one now

Answer:Row Length in Excel

do you want the rows to all be the same height?

click on the first row number on the left - shift-click on the last one to select all the rows.

then right-click on the row numbers >> row height >> type in a number...

you can do a similar thing with the columns too.

is this what you meant?

4 more replies
Relevance 57.81%

I am new to Excel and can't find out how to limit my "book" to 2 pages. I know how to print only 2 pages (the other 424 are blank and will remain so) for my own purposes. However, I am e-mailing the file to others, so I want to simplify their work by eliminating the blank pages.

Still looking for a way to convert this to Word....

Thanks in advance for your help!
Tricia
 

Answer:Excel - document length ???

10 more replies
Relevance 56.99%

I have 2 Excel files that I create for my company, a list of items we sell, one with prices and one without.  I use 2 columns on a page for both of them.  Other than the prices, they are exactly the same.  However, when I print them out, the one with prices breaks one row lower than the other, even though the margins, row height, and other page setup settings are exactly the same, as well as the printer.  I would like to make them the same, as it makes it easier to copy and paste new data between them.  Any help would be most appreciated.
 

Answer:Excel worksheet page length

A suggestion for a quick and dirty fix !  You say it is the list with the prices that is breaking one row lower. Go into 'Print preview' and 'Setup . . .' and increase the bottom margin very slightly, say by 0.1 cm. this should make it break a row earlier to match the other.
 
Apart from the elegance aspect, does it make a difference that it is the printed version that is showing this behaviour ?  Surely, any copying and pasting you are doing is done on screen and you imply that any misalignment is only showing up in the printed version.
 
Chris Cosgrove

3 more replies
Relevance 56.17%

the answer to this might of been found with a search but hey i'm lazy today and wanted to see who the excel masters are

using excel 2007, cell a1 contains an array formula (CSE) like so - {=MAX(LEN(A2:A470000))}
cells a2 through a470000 contain dates such as
12/12/2011
etc, you get the idea, i need the formula or something else entirely to return 10 not 5

thanks in advance
 

Answer:Solved: excel length of date field

i'll answer if myself thanks to another web site, Mike these guys are slackin' 'round here it looks like

=MAX(LEN(TEXT(A2:A470000,"m/d/yyyy")))

exit celll with ctrl, shift, enter
 

1 more replies
Relevance 56.17%

Hi i am Jo

would need help in finding the length of the third side of a triangle in excel

I have three points number: AB- 235 BC- 156 need to find length AC - it's not a right angle triangle,
 

Answer:Find length of side of triangle in Excel

Welcome to the forums Jo.

Having the length of two sides of a triangle isn't enough to calculate the length of the 3rd side, for a non right-angle triangle. You'll also need to know one of the angles.
 

3 more replies
Relevance 56.17%

Hi all,
I am wondering how to overcome the problem of Excel chopping off data.Is there a way to set a large limit or possibly keep the record length unlimited.This data is the results retreived from Access queries. The data after querying is exported to the Excel sheet via the following do command:

DoCmd.OutputTo acQuery, "queryName", "MicrosoftExcel(*.xls)", "Report" & ".xls", False, ""
Thanx
 

Answer:Exporting from Access to Excel-length limits?

If you are trying to put the entire string as one line it will never work. I believe the charachter length is 255. You can however create a new cell in Excel for each record like a line break.
 

3 more replies
Relevance 56.17%

My lady wife is having a small problem with a formula she is trying to use in an Excel spreadsheet.

She is trying to make a formula that she can copy and paste into various spreadsheets she utilises to organise her staff's workflow.
The five staff deal with about 30 suppliers and she wishes to be able to associate each supplier with a particular member of staff, so, for example, if column A is 'Suppliers'and column B is 'Staff Member', a formula using the IF function is placed in column B using the following syntax:
=IF($A1="aaaa","Rashmi",IF($A1="bbbb","Laura",IF($A1="cccc","Linda",IF($A1="dddd","Denise",IF($A1="eeee","Mark","")))))Click to expand...

This works just fine with only a few suppliers, but if the string is lengthened to more than about 9 suppliers, as here:
=IF($A1="aaaa","Rashmi",IF($A1="bbbb","Laura",IF($A1="cccc","Linda",IF($A1="dddd","Denise",IF($A1="eeee","Mark",IF($A1="ffff","Rashmi",IF($A1="gggg","Laura",IF($A1="hhhh","Linda",IF($A1="iiii","Denise",IF($A1="jjjj","Mark",IF($A1="kkkk","Rashmi",IF($A1="llll","Laura",IF($A1="mmmm","Linda",IF($A1="nnnn",&quo... Read more

Answer:Solved: Excel formula length problem

11 more replies
Relevance 52.48%

I was having this issue on my recently updated pc. when i double clicked on an excel file it would not run. tried various things mentioned in the forum. nothing worked.

i always got an error message - filename.xls is not a valid win32 application. thing is that office was looking for "excel office component" - whatever that is.

So I went to Control Panel>Programs>Default Programs.

Tried to change the default program for xls and xlsx files to excel, but it would not show up.

So I went to start and searched for excel.exe. that gave me the path to the actual file.

copied it down - went back to the control panel >programs/default programs > change and scrolled down to the file types, clicked on change > browse . and pasted the file path there.

problem solved. should work for the other office programs as well.
 

Answer:FIXED IT: EXCEL WONT LAUNCH WHEN I DOUBLE CLICK ON THE FILE - INSTEAD HAVE TO USE FILE-OPEN IN EXCEL

WE are blessed and may you go forth and find enlightenment now you have the answer.
 

3 more replies
Relevance 50.02%

Hi

I have been struggling with this for a few days now. I have very basic marco knowledge so be gentle.

I have a macro

Sub Rectangle48_Click()
If Range("D12") = Date Then
Range("D13:255").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Sheet1").Range("A1:A4"), Unique:=False
Else
If Range("E12") = Date Then
Range("E13:E255").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Sheet1").Range("B1: B4 "), Unique:=False
Else
If Range("F12") = Date Then
Range("F13:F255").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Sheet1").Range("c1: c4 "), Unique:=False
Else
If Range("G12") = Date Then
Range("G13:F255").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Sheet1").Range("D1: D4 "), Unique:=False
Else
If Range("H12") = Date Then
Range("H13:H255").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Sheet1").Range("E1: E4 "), Unique:=False
Else
End If
End If
End If
End If
End If
End Sub

which sort of works but rather than writing it out hundreds of times can I loop it?

Thanks
 

Answer:incrementing columns with a fixed row in excel

11 more replies
Relevance 49.61%

As I started writing this thing, I thought back to some of my program language classes inwhich my professor always told me "think like a machine, not a like a human" when writing code. That comment helped fix my problem. So for the sake of anyone else, I will post my problem and then my solution.

My problem:
I have 2 spreadsheets worth of information. I used 3 columsn to determine if certain information matches in both spreadsheets, and then a 4th column with a nested if to provide a result of the matches. The first 3 columns would return with a FALSE or TRUE. I would then use a 4th column to collaborate the information from the 3 columns into a common result. The problem existed when I tested for "TRUE" AND "FALSE" answers in each of the 3 columns. In thinking like a machine, I remembered that if it returned those answers, it did not do so in a text format that you can compare text to, it did so more as a logical statement.

The formulas I was using in the first 3 columns (or a derivative of):
=ISNA(MATCH(A1, Sheet1!$C$2:$C$50, 0)

The formula I was uing in the last column:
=if(or(a2="FALSE" and(c2="FALSE", d2="FALSE")), "Site is built", "Site is not built")

The problem existed when I tried to match the logical statement result with text instead of another logical statement result.

How the fomula should have looked:
=if(or(a2=FALSE and(c2=FALSE, d2=FALSE)), "Site is built", "Sit... Read more

More replies
Relevance 49.2%

Hi,Whenever I try to open an excel file, it opens in notepad. If I try to start excel from the start menu, I get a Windows Installer instance.It was working just moments before - I was working with a csv file.Any ideas?Thanks & God Bless

Answer:[FIXED] Excel starts a Windows Installer Instance

What is the exact error message? Is Excel trying to install itself?What Operating System?

9 more replies
Relevance 49.2%

I am trying to write a macro in Excel... it's fairly simple, but I can't figure out one part. I used the record feature to get started (I'm quite rusty in writting macros)...

What I want to do:
I have lots of data in one worksheet. I want to pick out some of it and put in into another worksheet. I want the row to be variable, the columns set.

For example, I want the info from row 26. I want take the info from worksheet "pricing" cell F26 and put it in worksheet "report" in cell B5.

Excel gives me:

Range("B5").Select
ActiveCell.FormulaR1C1 = "=pricing!R[21]C[4]"

For whatever reason, using the record feature, it's selecting the row and column in reference to the cell that the data is going in to! (B5 + 21 rows + 4 columns = F26)

What I would like is it to pull info from a variable row and fixed column... can you help me with the scripting? I know how to set the variable and such.
 

More replies
Relevance 49.2%

right now i am using excel 2010. I have a file created in excel 2003, which has many filters set to it. when i work on the file from the pc where excel 2010 is installed and try to save the work i get pop up saying FIXED OBJECT WILL MOVE.I can't understand this error. what do i need to do to resolve this issue.

Answer:fixed objects will move error in excel 2010

Do a Google search on "FIXED OBJECT WILL MOVE".It appears to be a somewhat common issue and could be caused by a number of things, such as comments, buttons, shapes, etc.Read some of the posts in other forums (found via Google) and see if that helps.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

2 more replies
Relevance 48.38%

Hi everyone,

I'm sure everyone has experienced the inconsistent structure of pivot tables. I wasn't able to figure this out in Excel 2003.. but hopefully Excel 2007 has an updated functionality?

To illustrate: I have a monthly sales report that reports #s by employee in the column header. So it looks like:

Albert Brian Charlie
Sales $100 $150 $200
Expenses $50 $70 $100

Now, if Brian does not work one month, his name will not be shown when the pivot table is updated. Is there a way to set the pivot table to show the same columns regardless if the data is blank or empty?

I've explored simply adding fake data (i.e. Brian has 0 sales and 0 expenses into the database) but wanted to know if there was an alternative method.

Thanks!

Simon
 

Answer:Solved: Excel Pivot Tables - Fixed Column Categories

"I'm sure everyone has experienced the inconsistent structure of pivot tables."

Not really. I read:

"By default, the Pivot Table shows only the items for which there is data."

Having said what it does, if it (then) only did it sporadically then ... that would be inconsistent.

TBH I can't get a handle on your data layout from "reports #s by employee in the column header" -- to me, that doesn't really sound "pivot table friendly".

Nevertheless, you can read about the "Show Items with No Data" option (available in, and maybe even from, XL2K) here. HTH
 

2 more replies
Relevance 47.97%

Try as I might, I can't seem to find a solution to my issue.  I have a spreadsheet and would like to save the spreadsheet dateas text and have the data output as a fixed column width with no delimiters (like an implied table) . I've tried altering each column in the spreadsheet using data, text to columns..No luck. When I copy and paste the data into a txt doc. the data remains as delimited.The original input to the spreadsheet is in delimited format.Anyone have any ideas for this?  Thanks

Answer:Excel - 2003 - save a spreadsheet in a fixed column text format

You can use Save As and choose "Text (MS-DOS) .txt" but you still have delimiters. I think you'd need a VBA macro such as the one in the spreadsheet on this page linked to here:http://www.databison.com/index.php/export-excel-as-fixed-width-text-file-format-using-vba/But I would prefer the time-honoured method of installing, as an additional printer, the "generic/text-only" printer and then, from the Excel print menu, choosing (1) that printer (2) checking the "Print to file" box, and (3) supplying a file name.The output will be a non-delimited text file. You may still have to do a bit of editing (e.g. in Notepad) but it gets you nearly there.Code: [Select] First Name   Surname   Date of birth Sex       Start Date
 John         Smith     01/01/1990    Male      02/02/2010
 Mary         Jones     02/02/1985    Female    05/05/2005
 Howard       Wilson    03/09/1980    Male      06/10/2001

3 more replies
Relevance 44.28%

Hi everyone who is having this isse, I got this issue for months, I spent alot of time to search for the solutions, I found a lot of here but can not fix my issue, I think you did, too. but today, when I decided to remove all of the FingerPrint softwares, you guys please notice that, when the Fingerprint software is disabled, your login windows will become normal as windows XP style. If it apprears in your system, the log in windows can be looked different. When I removed all of that software, I restart and problem has gone. But I am not sure 100% that it is the problem or not. May be we should report to LENOVO or IBM that they can upgrade the driver for Fingerprint or fix the bug in the fingerprint software. Please try this then let me know the result. Thanks.

Answer:FIXed:T400 Lenovo can not log in when wake up from suspend or sleep time FIXed ( but not sure 100%)

I forgot to let you know about how was the issue: - When we leave the laptop for about 45 minutes or more than that, and we wake it up, the windows showed the "this computer is being locked by <account> only that account or Administrator can unlock" etc... - Then we press Ctrl + Alt + Delete, and then nothing happens, only a blue screen without anything, the only way that we have to do is hold the power button until the laptop is off then back on. and I fixed that problem via uninstalling all of the Fingerprint softwares. I hope that LENOVO or IBM can upgrade the software and fix that bug.

1 more replies
Relevance 38.13%

right. i had another thread here but we fixed it. apparently though, we didn't. i just 2 BSOD's in a timespan of about an hour. i didn't package the first dumps, because i hoped that it was just an anomaly... anyway, a .rar is attached, can anyone please look at it? tnx

P.S i got my first few VPU recovery's today... a few minutes before the first BSOD and another few minutes after the BSOD in this package. CCleaner startup showed that some AMD files would be deleted upon startup, and since the only AMD hardware i own is my graphics card, i figure those two are connected.....

Answer:fixed BSOD isn't fixed :(

i got my first few VPU recovery's today... a few minutes before the first BSOD and another few minutes after the BSOD in this package. CCleaner startup showed that some AMD files would be deleted upon startup, and since the only AMD hardware i own is my graphics card, i figure those two are connected.....

3 more replies
Relevance 37.72%
Question: Get length of INT

Hey,

I was wondering if anyone could tell me the best way to get the legth of an integer in c/c++ e.g:
Code:
int N_Num = 4634;
Basically if I could somehow have an output of 4 because there are four characters 4634...anyone know a way?

Thanks

Doctorzeus
 

Answer:Get length of INT

Don't worry I got it except I used a char:
Code:
char Number[10];
int NNumbers = 0;
while (Number[NNumbers] != NULL)
{
++NNumbers;
}
Anyone got another way though??
 

2 more replies
Relevance 37.31%
Question: Y50 Battery Length

It says on the battery length is ~5 hours yet when my new Y50 is fully charged and on power saver it only holds for 2 hours while doing absolutly nothing on the laptop. It also drops from 100% to 95% charged when I take out the charger. Any ideas whats going on? did I get a faulty battery?

Answer:Y50 Battery Length

try doing a gauge reset via energy manager

3 more replies
Relevance 37.31%

Hello,
I have a small problem. I am currently creating a 2 dimensional array (or matrix) of size 100 by 100. Now I get errors when I make my matrix larger than 210 by 210.
The problem is is that I need a matrix 10000 by 10000.

example code:
double data[10000][10000]; //this gives errors
Okay, which would be the best way to go and will work?
First, don't do 2 dim array, do a 2 dim vector.
Second, don't do 2 dim array, do pointers in two directions.
Or Third do the 2 dim array but go in another direction.

I understand that that is like 800 Megabytes. I can shrink it down to 1000x1000. But that is the lowest I can possibly go

Thanks for the thoughts
Sincerely,
Ronald
 

Answer:C++, Matrix Max Length

Okay,
The data is going to be read in from a file. It is actually a docuement that is about 800 pages in length. My program parses the data, and stores all the necessary information. I believe I am going to store the data into a 2D Vector. THe problem is that I have no examples that are functioning, so I cannot see what I am going wrong. If you could help me out in this area (providing me an example of a working 2D Vector), I would be most appreciative.
~Ronald
 

1 more replies
Relevance 37.31%
Question: USB cord length

Anyone know if there's a working restriction on a length for USB 2 cord im running A 20FT cord, I have a touch screen on my media center screen as I use as the control for Media, Video, music and my big screen, any how it seems to work for about 15mins and then goes a little flakey and stops workin. the only way to rectify it is pull out the USB to the back of the monitor and plug it back in,

Answer:USB cord length

According to Wikipedia it is 5 meters. USB - Wikipedia, the free encyclopedia

9 more replies
Relevance 37.31%

Whats the longest i can run a USB cable from a printer to a PC without loosing the signal strength?

Answer:Max USB Lead length

Thanks.

1 more replies
Relevance 37.31%
Question: Cable Length help

I use win xp pro and I know that the new BIOS that talk back and forth to the Devices have a Length Limit.What I meen is I have a Scanner and it uses a USB Cable. Do I hjave to make shure that the USB Cable I use is not more then 15 Feet?I ask because I thought I remembered something about if a Cable is more then 15 Feet.Something about the way a Device works is it sends Data to the computer and the computer has to send Data back to the Device. And if the Cable is more then 15 Feet you may get problems.Or is this just with Serial Cables

Answer:Cable Length help

QuoteDue to the maximum length of the cable between two devices of 5 metres and a maximum number of 5 hubs , it is possible to create a chain 25 meters in length.http://en.kioskea.net/pc/usb.php3

4 more replies
Relevance 37.31%

Hi Folks, I recently bought a S440 and would like to add a SSM (M.2) now to install the OS on it. Unfortunately I'm not able to find an answer about the length of the SSM (2242, 2260, 2280). Is anyone able to provide me with this detail or can refer to a source? Thanks in advance.













Solved!

Go to Solution.

Answer:S440 - M.2 Length (SSM / SSD)

There are no "SSMs". They are still called SSDs. You will need a 2242 M.2 SSD.

3 more replies
Relevance 37.31%
Question: Length Required

Please help! I just got Hughesnet satellite high speed ( its my ONLY option for anything other than dial-up). I am using an HP Pavilion a1118x with an AMD Athlon 64 and Windows XP. When I try and sign into Myspace I get " Length Required" on a white screen. Here's the kicker..on the SAME computer...if I sign out of Windows and sign back in on my wife's user name..I can go to Myspace and sign in with no problem. What settings do I need to change to fix this? PLEASE HELP!
 

Answer:Length Required

Welcome to TSG....

Try this site it might help:

http://www.checkupdown.com/status/E411.html
 

3 more replies
Relevance 37.31%

I'm using Windows XP 64. This version has two shell32.dll, one in system32 and the other in syswow64.
The first (ver: 6.0.3290.1830) should be 10492416 bytes long, but when I try to open it with an hex editor (XVI32) it shows 8379392 bytes exactly like the other.
Obviously when I save it and reboot windows crashes.
Does someone know how it could be possible and if there's a workaround ?

Thanks.
 

More replies
Relevance 37.31%
Question: GET Header Length

I'm getting GET Header length of 32 bytes. is this the RFC Standard? If not, what should it be?
 

Answer:GET Header Length

are you talking about an HTTP header?
 

4 more replies
Relevance 37.31%

I'm fairly new to computers and need to change the length of the wep key code in vista. It wants 5 or 13 character code my modem wants a 10 character code (no option available here). Is there a way to change the wep code length in vista? I really don't want to go unsecured wireless.

Thanks for the help.

LoRetta
 

Answer:wep key change length

If you can go with WPA or WPA2, that would be better than WEP.
 

2 more replies
Relevance 37.31%
Question: video length?

How do I shorten the lenght of a video clip or just pick a certain clip of a video to play over and over? Basically there is a certain part of a video that i want played over and over. I am getting the video from someone else's site and want to play it on mine with just that certain part.
thanks!
 

Answer:video length?

Generally, you can bring the loop into an NLE, copy the clip as many times as you need, and play it. If you want to burn the loop to a DVD, you can set up the loop to endlessley play.
 

2 more replies
Relevance 37.31%
Question: USB cable length

Is there an optimum length for connecting a USB printer to my laptop? Lexmark say my 3m cable is too long and it should be 1.5-2.0m max? I have a problem with my X85 not being recongnised everytime I start up my computer. I then have to uninstal the software and then reinstal before I can use the printer.This sounds like waffle but they say that "the information is being lost due to the long cable"Any answers?

Answer:USB cable length

The maximum length for full speed devices is 5 metres and for low speed it is 3 metres.AH

5 more replies
Relevance 37.31%
Question: typical length?

i have google set to display 10 results/page; this usually works just fine.

but then when i google the following, i get 2!

http://www.google.com/search?sclient=psy-ab&q=mozart+"symphony+41"+"typical+length"&btnG=

are others seeing that?!

moreover, nothing particularly useful in either of the results shown. those very search terms used to yield dozens and dozens of hits (mostly CD reviews) clearly quoting "...typical length of a performance is..." yadda yadda pertinent information.

now i'm not sure HOW to google it up.

is "typical length" some sort of magical phrase which triggers google to play with its parameters?
 

Answer:typical length?

If there are less than the set amount of results to show, as is the case here, then you will see all they have. Google has 2 results based on your query.

Instead of:


Code:
mozart "symphony 41" "typical length"
drop the quotes and try this:


Code:
mozart symphony 41 typical length
You will see About 1,290,000 results.

The use of quotes can be helpful in refining a search, sometimes a hinderance. Maybe just quote one of the terms you are using instead of two...
 

3 more replies
Relevance 37.31%

I have a question regarding files. How many levels of subfolders can there be? I've seen the max amount of characters is 260, does this include the path with slashes? I remember back in the day when files could only be 8 characters long and I had to make shorthand notations to remember what the files were. I have several files with multiple levels of subfolders or categories of information, and I'm wondering at what point do I need to start making shorter names.

Answer:Max file name length

255...

Thats in NTFS.

1 more replies
Relevance 37.31%

has anybody out there any idea what is the maximum length that I can have a USB cable to drive my printer.I know they make USB cables 5m in length but is that the maximum that can be effectively used.

Answer:USB cables...max length

Has purchased a 10 Mtr from maplins. click here

6 more replies
Relevance 37.31%
Question: IDE Cable length

What is the maximum length I can make My IDE cables?
I know it probably is drive specific (due to variances in voltage etc) but as an average, how long can I go without data loss?
 

Answer:IDE Cable length

the ATA spec that a cable can be safely 18" in length before data cooruption occurs.
 

1 more replies
Relevance 37.31%

Hi,

I'm running Windows 7 Ultimate 64-bit and I'm trying to change the password for my main administrator account, but I come across the following error when I click the 'Change password' button:


Quote:




The password you typed does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements.




I did some Googling and came across how to change these things under the Local Security Policy window but couldn't find anything pertaining to setting the maximum password length.

If it helps at all I actually have a Yubikey. If you don't know what it is, then long story short this is a security-centric USB device, and it can be configured to punch out the same static text string everytime if you wish (it acts like a very secure keyboard, basically). This is what I've done with mine and I currently have it set to punch out a 64-character string which I would like to use as my password (much better security :D). But entering this gives me the above error which brings me here to ask for some help. I'm quite proficient with computers but this one has me stumped .

Any help would be appreciated. Thanks :).

Answer:Max password length?

Well it's supposed to be 128 characters but it's really 32 characters.

3 more replies
Relevance 37.31%
Question: encryption length

Question:
Can a plaintext character string be encrypted to a ciphertext string where the resulting ciphertext string is the same length as the original plaintext string?

Pointers to references would be big help.
Thanks in advance.
 

More replies
Relevance 37.31%
Question: cable length

want to network my computer with my daughters so she can use my broadband internet connection. What is the longest cable i can use to network our computers? Our computers are about 15 feet apart.
 

Answer:cable length

here's an article on home networking: http://www.compunotes.com/ArticleSection/networkhome.htm

If using ethernet cards, 328 feet.
 

2 more replies
Relevance 37.31%
Question: page length

Not for default but for a single page, I want to extend the printing below the point at which the print begins a new page.
 

Answer:page length

Welcome!

In what program do you wish to accomplish this? (Excel, Word ... etc)?

Have you tried setting a custom paper size, specifying it as longer?
 

2 more replies
Relevance 37.31%
Question: USB cable length

I need to run a usb cable with a wireless usb adapter at the end of it to my pc. I`m using an Huawei E5331 MiFi mobile Wi-Fi hotspot and unfortunately it doesn`t have an ethernet port. The best signal in my house is in the attic and with the house being very old cottage the wifi doesn`t tend to travel too well so what i want to do is put the wireless usb adapter as close to the mifi lite as i can so as to maximise the wireless speed.
What i`m wondering is if i go over the usual 16 feet limit for usb 2 do i need to put a powered usb hub in the middle or is it possible to use a longer usb cable without losing too much strength of signal?
 

Answer:USB cable length

A powered hub does nothing to the signal. It is solely for providing electric power for attached devices. I'm not aware of any "USB amplifiers", but if there was ever a demand for them, I'm sure someone made them. The problem is that it would need to amplify signals in both directions, for sending and for receiving.

The cable manufacturer should have specs available on maximum lengths. Specially designed cables have longer reaches. If you don't get a sufficient signal (and I wouldn't in general recommend trying to extend the USB cable as a means of improving it), you might consider putting a repeater somewhere else in the house (if your setup permits it), using a better antenna in the attic, or even extending that antenna to an external location. There are also USB adapters that have larger, extensible antennas.

Others will propose other ideas. Many of them will be better than a long USB cable, though that is still a possibility failing anything better in practical terms. If you can't find specs on your particular cable, at least make sure that it is erll-insulated. They have pretty good USB cables at the $ store, but they are nearly uninsulated and only good for some uses.
 

2 more replies
Relevance 37.31%
Question: Ethernet length?

Hey Guys,
I don't quite understand how/why this works. If you have a piece of....oh let's say, CAT5e cable the maximum length that you can run is 300ft. before you need to put in a repeater,hub,switch etc. But why is it 300ft.? Why at that distance do you start to encounter problems with the transfer of data?( I understand all that I posted just not as to why.)
If anyone could shed some light here that would be great!
Thanks,
Spock96
 

Answer:Ethernet length?

Wire has resistance so when it arrives at the other end it might have lost too many volts.
 

2 more replies
Relevance 37.31%

Hello,
I will be running from my (wireless) D-Link Broad-Band Router to my daughters upstairs room PC. I plan to use standard cat-5 (cable run about 125ft. with all the wire curves etc. How long can that cable be before distance becomes an issue?

OR.. I also will be toying with doing it wiresless as the D-link Router is wireless, but will compare cost or cable to buying another wireless NIC and adding a "Booster Antenna" from the router.

Thanks for letting me know.
jtbest
 

Answer:What is the LENGTH limit for CAT-5 ?

11 more replies
Relevance 37.31%
Question: USB Cable Length

Does anyone know if there a limit to the length of USB cable that can successfully be used with a printer and a scanner?I was looking at 5m cables. A friend of mine suggested that this might cause problems?

Answer:USB Cable Length

click here for a guide to length of cable for different items. j.

4 more replies
Relevance 36.9%

Does anyone know how I can extend the ringtone for SMS and Messenger.
I have downloaded some ringtones and assigned them to SMS and Messenger but they only play for 3 or 4 seconds, not long enough but I can not find anywhere how to make it play longer.

Answer:How can extend my ringtone length?

Whole ringtones, audio profile situation on WP is pathetic. I hope MS spends considerable time during WP10 development on Ringtones.
Coming from,Symbian and Blackberry this ringtones algorithm is DOA.
I could only extend the audio till 6 seconds using ringtones maker.

2 more replies
Relevance 36.9%

Hi all ,first for me ,hope i do it right. Ihave searched all the appropiate posts on my problem with noe sucess . I'ts down to you all there . I have Win XP / Firefox/ Hotmail 250 mb and I just like to write long and descriptive e-mails ( why use 10 words ,when a hundred will do ) and i run out of space by the time i have typed 12 lines of text. Any tips on how to increase the size of my type face.Thanks in advance, Francie.Mode Edit: Closed open tags. ~ Animal

Answer:How Do I Increase The Length Of My E-mails

The only tools in hotmail are spell check, dictionary, and thesauraus. Did you mean DEcrease type face? Out of curiosity (I have the same programs) I ran a check on how many lines I could type in hotmail and stopped at about 40. Maybe there is a different program for Spain. There are other free emails such as Yahoo and Gmail. Gmail allows you to change type and colors.

4 more replies
Relevance 36.9%

So I have a MP3 file from a while ago. The song itself is about 2.5 mins long, but every media player displays it as being 16 mins. The track ends when the counter is at 2.5...
So is there a way to get it to display at 2.5 rather than 16?
 

Answer:MP3 Song length error

7 more replies
Relevance 36.9%

I asked recently about the max length of cat 5 cable, which it turns out is at least 100m. I have set up a network with a PC connected to my router by a 60m (approx) cat 5e cable. No lights on the nic show and the connection is listed as diconnected. I have tested the cable with a cable tester and it is fine. I then connected the PC to the router with a 5m cable (after I'd moved it ;-) ) and the PC works fine, lights on nic and it can see the other PCs on the network.Whilst checking settings on the router and refreshing the client list, an extra IP address was shown, but the host name was (null), after refreshing that IP would disappear.My question really hangs on whether the nic/router has enough umpf to communicate over 60m, and are nics with a bit more available?TIA

Answer:Network cable length

what type of NIC is it? not sure if it matters but 10BaseT and all those sort of things...but I am sure someone else will know...

10 more replies
Relevance 36.9%

I sell scientific software that uses an A/D converter. These require full-length PCI slots, which are getting harder to find. Any computer resellers that offer full-size slots with their PCs?
 

Answer:Full-length PCI card

Is a rackmount enclosure an option? Check out adlinktech.com and rackmount.com
 

1 more replies
Relevance 36.9%

An application failed to D/L .Net Framework Version upgrade from MS, apparently because the Server did not specify content length.

Does anyone have any idea how I can fix this ?

I recently installed Firefox and re-installed my OS, I am sure it needs updates but I would like to proceed, I have been having problems updating.

More replies
Relevance 36.9%

I have to make a cable run that is around 640' and setup two PC's in a workgroup. I know that 10BT max is 100m or 328'. Are my options here installing a hub or a small switch half way to break it up or act as a repeater? I need to keep these two PC's off my main network due to traffic issues.
 

Answer:Max 10BT cable length?

8 more replies
Relevance 36.9%

My X100e battery only gives 1.5 hours per charge on a clean Win 7 Starter install with no additional software. Is this normal?

Answer:X100e battery length

If you have the 3 cell battery it's normal. With the usual 6 cell battery you should expect about 3,5/4 h

2 more replies
Relevance 36.9%

Hello all,

We are troubleshooting a system in which our keyboard (PS2) has just stopped working. It is not the keyboard as it works on another system. We thought we had it narrowed down to cable failure for when we plugged in another keyboard it worked.

On this particular system we have to have the monitor setup across the room and we run the cables under the floor. Today we replaced the PS2 cable and it still doesn't work.

It's too far for Bluetooth and Wireless so now we are thinking of trying a USB Keyboard and cable. So my question is what is the maximum length for a USB cable to still work?

Thanks
David
 

Answer:Maximum cable length for USB?

6 more replies
Relevance 36.9%
Question: Cat5 cable length

Can someone remind me of the max length of a cat 5 cable, before degradation. 100m rings a bell, but can anyone confirm it?

Answer:Cat5 cable length

I think it may be 300ft.But I'm not totally sure.

3 more replies
Relevance 36.9%

In column A, I have the following data: 2, 2, x, 2, b, 3, 4, 5. A total of 8 rows of data. The first data can be in any row, I mean the starting row will vary. Now I want to insert 3 rows after the ?b? and place the sum of all data above it directly below the ?b?. In this brief example, the total would be 6. The macro cannot be column specific as the data will not always be in column A. Further, the macro cannot be row specific since data can start at any row and I may want to add just the first row or add the first 25 rows. This macro was exceptionally easy in the spreadsheet I was using but in Excel, I can?t begin to write the necessary code. Any help is greatly appreciated.

Answer:How to sum a column of unspecified length?

re: "This macro was exceptionally easy in the spreadsheet I was using but in Excel, I can?t begin to write the necessary code."What macro are you talking about? What spreadsheet were you using?How did the other macro work? How did it know about all of the variables (row, column, number of cells, etc) that it needed? Did it ask you a series of questions?Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

2 more replies
Relevance 36.9%

How do I determine the length of the CCFL tube I need for my T60 (2613 EAU, SXGA+)? The maintenance manual doesn't  say. 

More replies
Relevance 36.9%

i want to use cat6 cable to connect an outdoor wireless radio (CPE) to a PC. the distance from the rooftop (where the radio will be placed) to the PC is more than 100m. Can I still use cat6 or use a repeater? i dont have the financial capacity for fibre.
Please help!
 

Answer:recommended cat 6 cable length

Recommended length for cat6 is 100m... but I've stretched that before. I would say give it a shot. If it doesn&#8217;t work well, cut it in the middle and slap in a repeater.
 

3 more replies
Relevance 36.9%

I bought a home in the woods, 2200 feet from the nearest DSL point of presence (the nearest home, where it works great). There's no cable TV at the new digs either, not that I care--I have a satellite receiver. But I need the Internet before I can truly retreat from my city apartment. Question: can I simply bury 2200 feet of Cat-5 wire from the POP to my home? I've got a tractor/backhoe and can do it; will it work? If that won't work, I can of course get a satellite Internet system, but here in the Northwest the weather can be rainy for weeks at a time, and that certainly hinders satellite TV.

Does anyone have experience with a long DSL run like that, except the phone company?
 

Answer:DSL line length issue

Nope, 2200 feet is far in excess of how far you can run CAT5, 100 meters is the specification.

If you want to bury something from that POP, you'll need to consider fiber, which isn't all that expensive, but more than CAT5. Ethernet to fiber converters on each end, and you'll have your connection.
 

1 more replies
Relevance 36.9%

Hi,

I want to connect a pc in another room, using about 20-25m of ethernet cable, to my router. Will it work ok over that length of cable?

Thanks
 

Answer:Ethernet cable length

Yes. 100 Mbit and GigE is good on cable lengths up to 100 meters with Cat5e and Cat 6.
 

1 more replies
Relevance 36.9%

I have a network with /30 address and I have to the last available subnets for 6 interfaces.Will I use .245, .246,.249.,250,253,254 or.241,.242,.245,.246,.249,.250.I will be very interested to know ?

More replies
Relevance 36.9%

I have two desktops running XP pro. I am connected to the internet via Verizon DSL with a Fujitsu Speedport modem. I had been using a Linksys wireless broadband router to connect to the DSL modem and ran my two computers (via hardwire, rather than the wireless mode) as a home network off of the router, manually setting the IP addresses for the PCs off of the router (192.168.1.XX). I replaced the Linksys router with a 3Com OfficeConnect Dual Speed Switch 5 because I didn't want to use the wireless network anymore. Initially the 3Com wouldn't allow me to connect to the internet; then after talking with Verizon, they said to shut down the modem and the switch, allow two hours for the Verizon network server to lose the MAC address of the router, then turn the modem back on and the 3Com, so the server would pick up the MAC address of the 3Com. I then turned one of my PCs back on and it was able to sync up thru the 3Com and go out on the internet - picking up the IP address from the network. However, the NIC card in my second PC will not pick up an IP from the network, instead taking it internally from XP. When I try releasing and renewing with IPCONFIG, it comes back and says it can't contact the DHCP server and I get a limited or no connectivity message from the Local Area Connection icon, even though it says it's connected at 100Mbs.

What I don't understand is why my first PC takes it's IP off the network, but the second one doesn't? I'v... Read more

Answer:IPconfig issue? (sorry about the length)

I replaced the Linksys router with a 3Com OfficeConnect Dual Speed Switch 5 Click to expand...

Howdy sashurst...

There's your problem a switch can't asighn an IP address, where as the Liknsys router can act as a DHCP server and asign an IP address...

then turn the modem back on and the 3Com, so the server would pick up the MAC address of the 3Com.Click to expand...

Don't know what their talking about here as a switch doesn't have a MAC address...
 

3 more replies
Relevance 36.9%
Question: Music Video Length

ok, i got this videos from yahoo...

using LyFOX and VLC (if this is illegal stuff please delete the post)

the video plays (the whole video) but the timing stops at 1 minute and some seconds (1-17)
since i want the video for my ipod, i tried converting to MP4, but it only converts the time that the video timing displayz..

it happens with other videos too not just with one...

how can i fix that problem? or set a proper timing for the video..
ex) the video is 4 min long, and it plays. (the whole video) but the time bar or thingy stops at 1 minute and some seconds..

how can i edit so it stops at the correct time, (i want to do this because it prevents me from converting the whole video to mp4, it only converts the minutes that it shows.)

hehe.. sorry if i didnt make my self clear.. but i dont know how to explain it..
 

More replies
Relevance 36.9%

Hi,

Recently, I started having a serious problem with some of my *.mpg video clips. WMP 10 will report the length of the clip less than the actual length, even then it will play the full clip.

This also happens with other players except of VLC which is the only player will report the correct length of the clip.

I checked the clips with GSpot and it reported the correct length also.

I think this is some kind of codec or OS-based problem. Like I said, this just started recently- these files used to play fine and still play fine in any other PC. I uninstalled all my codecs and reinstalled them, but it didn't make any difference.

This doesn't happen with AVI files, just with certain MPEG-1 files,

Any ideas?

Thanks
 

Answer:mpg playing length problem in WMP

don't know, but i would run chkdisk in case a file is out wack or try restore. wmp10 does some funny things.
 

1 more replies
Relevance 36.9%
Relevance 36.9%

DocFletcher is shown on my desktop as taking 14 minutes to download. Is that normal?
Adblock is shown as taking nearly as long. Is that normal.
A computer magazine suggests dumping Flash then the next news item I wanted to run demanded that I run with just that. What should I do to get it to run?

Answer:Length download time for add ons.

Flash player is riddled with security flaws.
unfortunately a lot of web sites still run Flash files and have not yet changed to the more secure HTML5.
Best advice is to dump Flash to stay secure and avoid the sites that still use it.

8 more replies
Relevance 36.9%

Back in April I read that BT were conducting trials,with the intention of increasing the maximum line length for Adsl to 6km.Has anyone heard anything since, BT claim to have no knowledge of when/if this may happen.

Answer:Broadband line length.

It is called RADSL - see click hereAs always, go to the bt.com site and enter your phone number, if you want to know whether you can get DSL /ADSL / RADSL through your local phone exchange

10 more replies
Relevance 36.9%

What is the maximum length for the IDE cable for a Floppy Disk Drive?

------------------
Chris the Tiff
 

Answer:What is the max length for a floppy cable?

I can't give an exact figure, but I would say not very long at all. The problem with long parallel cables is that the data moves along the individual wires at different speeds. In long cables you get to the point where the data being read is corrupted, because the data in each wire is out of phase with its accompanying data in the other. I think the correct terminology is propagation delay.

Hope that helps a little bit.
 

3 more replies
Relevance 36.9%

Hello all,
Does anybody know where the maximum user defined path length is set. As I understand the situation 255 characters is the default value, with the actual maximum being 511.

Best Regards,
nosbm

Answer:Windows XP path length

It depends on the actualy path...
If you are talking about an endless heirarchy then thats 255 I believe.

1 more replies
Relevance 36.9%

I was wondering what is the best length for connecting a scanner by parallel cable (LPT)?
We have a scanner which is a few meters away from the computer and wanted to know if it wouldn't work if the cable is too long.

Thanks
Grenge
 

Answer:Cable length for scanner

The physical maximum length for parallel cables is only 3 meters (ten feet) so your peripherals need to be pretty close to the computer.
 

2 more replies
Relevance 36.9%

I need to connect a new HP printer for two users in an office. Due to the "looks" of the office, I am extremely limited on how cables are allowed to be setup and the cabinet where is located that this needs to be.

The bottomline: It requires approximately 38 feet of USB cabling to go from the printer to the computer that it will connect to. I can figure the length and how many cables I need from a catalog: 2-16' and 1-10' will do it.
QUESTION: Will the printer work properly with this length of cabling? Or are we seriously sacrificing performance?

Thank you for your input.
 

Answer:Solved: USB Length Question

6 more replies
Relevance 36.9%

Ok, a few months ago I posted here asking why I couldnt update my BIOS because I had a frequent crashing problem with graphics intense video games and it was suggested (by others in the games who fixed the same problem) that upping the RAM or CPU voltage by .1 to .2 would stop the crashes but my BIOS doesnt allow me to change that.

So I went to the PC forums specifically for M848ALU motherboards and discovered that I didnt need to change the voltage, rather I needed to change the clock ratios between the CPU and the RAM. I found a stable ratio and was doing fine for a few months.

Well a couple weeks ago there was a minor electrical storm in my area and I forgot I had mt pc turned on until the power flickered and rebooted my PC. I went to shut down the PC once it was finished booting but there was another surge and rebooted my PC again. So I shut it down from the power supply before it started to post.

The next day I tried to boot up the machine and you could hear the fans and HDD spin up but wouldnt post. So I reset the CMOS thinking maybe comething in the surge changed something. Still no post. I took it in and had the power supply tested and sure enough a line in the power supply went out. I replaced the 450 with a 480 watt and again I started suffering game crashes.

I tried to look back into some of these forums to see what I did to fix it last time and made the BIOS changes. But now I am having a heat problem. My CPU used to idle at 48C and now it idles at 51C. Wh... Read more

Answer:Heat problems (sorry for length)

16 more replies
Relevance 36.9%

Write a program that asks the user to enter a word. The program will then repeat word for as many times as it has characters:

Enter a word:
Hello

Hello
Hello
Hello
Hello
Hello

To do this you will need to use the length() method that counts the number of characters in a string:

String inputString;
int times;

. . . .

times = inputString.length()

//The above is the question and when run its tells me that the java.lang.String cannot be applied to (int)

and it refers to the line times = inputString.length(word);
 

Answer:Need help wiith length() method

What is "times = inputString.length(word);" supposed to do? I am not aware of any length method that takes a parameter. What type is the "word" variable?
 

2 more replies
Relevance 36.9%

I want to connect a scanner and a photo printer to my computer with a USB cable. Due to the location, the cable will be about 16 ft. long. Will this length affect the efficiency of the scanner or the printer?

l8nighter
 

Answer:Maximum USB cable length

Hi and welcome

From what I've read the maximum USB cable length is 16.5 ft with out a signal boost, so you might be just barely OK.
It may make a difference if it's USB 2 or the slower USB 1.

If you have signal problems or need to go longer a powered USB hub would help. There are also some cables that have a built in signal booster available.

Here are some items for that purpose, there are no doubt many other places you can check if needed:

http://www.usbgear.com/USB-Extenders.html
 

2 more replies
Relevance 36.9%

I've heard (and read) that USB cables cannot be over 15 feet in length; if it is, the device on the other end will not be able to 'push' the signal. Is this true? I need to run about 35 feet of USB cable. Is there some kind of powered "repeater" I could use? Maybe put one at the 12 foot point, and another at the 25 foot mark. Any ideas will be appreciated. This isn't for a printer so a wireless print server won't work, unless I can use other USB devices in a wireless print server. I don't think I can though. If I could, they'd call them 'wireless USB device thingamajigs'. Any ideas from the geniuses (or is it genii?) here at MG will be appreciated. Thanks.

PS- I'm pretty sure that 'thingamajig' is a technical term.
 

Answer:USB cable length limitations

See if this will help you out dlb
http://www.usb.org/about/faq/ans5
Powered hub.

And the correct term is whatyamacallit.
 

3 more replies
Relevance 36.9%

Is there anyway to quickly tell how long my powerpoint presentation is? I am in PPT 2000. Just was wondering how long in minutes. As I want to put a song in the background.

Thanks
 

Answer:powerpoint presentation length

It's as long as you make it with the transition settings. You could go to View-Slide Sorter view. If you've already got transition settings on it, then you'll see the time for each slide in slide sorter view.

If you're not setting it to automatically go from slide to slide (and you're using mouse-clicks to move to each slide), then you'll need to "rehearse timing"
 

1 more replies
Relevance 36.9%

Hi all--

I am trying to create a file in Excel in a fixed record length to provide to a customer. I have it pretty well worked out except that they are asking for a record that is 535 characters!!!!!! I have my data and added spaces to account for the rest.

When I open in Access or Wordpad, however, Some of those spaces are missing. I need it in .txt format but don't know if I can go beyond 255 characters in record length.

Any ideas?

Thanks so much!!!!!
 

Answer:Maximum Record Length

I'm trying to figure out what you want.

Is it how many characters you can have in a single cell reference?
From Excel help:
Length of cell contents (text) 32,767 characters. Only 1,024 display in a cell; all 32,767 display in the formula bar. Click to expand...

Are you referring to the name and path of the file?
From How Windows Generates 8.3 File Names from Long File Names:
Windows supports long file names up to 255 characters in lengthClick to expand...
 

1 more replies
Relevance 36.9%

I'm trying to convert a CD into ogg format and CDex won't save to my drive unless I reduce the length of a filename. I tried that only to find out that when I tried to rename it what it's supposed to be named that I could not fit the name of the song in the file name space. How do I get around this? Google says it's a limitation of the file system, but I think there's a way around it.
 

Answer:File name length in Windows 7

Vista upped the file length limit to 260 characters, but this includes the full path iirc. Although some media programs limit the length even shorter, one of the apple players, i think its the podcast thing limits to 63.
 

3 more replies
Relevance 36.9%

can anyone offer insight as to why i absolutely cannot adjust the length of the address and search bars in windows explorer in my fresh install of win7? this is my first time working with win7 so i have no frame of reference if this is any kind of normal thing or not.
if i mouseover the little segment in between where i expect to be able to drag i get the double horizontal arrow but clicking and dragging does absolutely nothing. i can adjust the length correctly in save/open dialogs but not a regular explorer window. it's driving me nuts.

google has turned up limited results of similar issues but they were discussing win7 beta and said it started working in a later build. i'm using release (i.e. 7600). the only possible thing is it's the $30 student upgrade instead of retail but i can't see how that would make a difference
 

Answer:Win7 Address Bar Length

Hit the alt key, right-click an empty area of the menubar and see if "Lock the Toolbar" is checked.
 

8 more replies
Relevance 36.9%

I recenlty had to change to another machine.  Both have Windows 7.  I custumized the startup and exit sounds, which last about 6 or 7 seconds.  However, on the new machine, the same sounds (and sound files) get cut off at 1 or 2 seconds on both startup and shutdown.  I didn't know that was changeable.  Why will the new machine not play the whole 6 seconds but the old one did?  How do I change it?
 
Thanks.

Answer:Startup sound length

I have searched this problem, but only found that it was because the original sound file was not as long as thought, but that is not my circumstances.  I am using the same files as before and I even played them to make sure.

4 more replies
Relevance 36.9%

KB3102429 for Windows 7 causes MAPI to deliver a zero length attachment to Thunderbird (or any other eMail client).


And they moved it from "optional" to "important", so if you had it "hidden", you got it back again.


And if your computer is under PCI (Payment Card Industry) security, hiding it makes you "non-compliant".


Does anyone know of a way to work around the issue other "hiding" the bad update?

More replies
Relevance 36.9%

Hi All,

What is the maximum character length for a file name?

What is the maximum character length for a file path?

If this combined maximum is exceeded, is there a recovery method for the file?

I have 3 files that have exceeded the maximum length; I don't know how... they just have...
I am unable to delete the files ithe the current location, I can copy them but not move them. I can not rename them.

WinXP sp2, files are stored on a mapped (2003 sp1 server) drive.

Interesting hey!

Thanks,
Stuart.
 

Answer:XP Filename/Path length

According to:

http://msdn.microsoft.com/en-us/library/930f87yf(VS.80).aspx

The max length of a filename path is 32768 characters.
 

1 more replies
Relevance 36.9%

So, I'm stuck using satellite in one of my shops....and I'm having some pretty big connection issues. Because of some recent remodeling, we've had to move the modem to the other side of the shop, and because of this, we've got about 250-300 feet of coax round trip.....and speeds are slower than dial-up at this point....

Anybody know if the length of the coax could be effecting connection speeds?

Thanks......
 

Answer:Coax length question...

Length shouldn't, at least not at that length. I would put my money on a bad end or something of that nature. That would very easily cause problems. See if you can get the ends reterminated.
 

4 more replies
Relevance 36.9%
Relevance 36.9%

If the length of cat.5 wire is over 100m (~130m-150m), the signals will be lost using normal 10-100Mbit switch, so What is the solution? Is Gigabit switch will resolve the length problem?
 

Answer:Over 100m length. . Solution??

At work we had to decrease the speed from 100mb to 10mb and things started working fine at that length. Don't really care to think why it works b/c 10/100/1000 speed cables are all cat5/cat6 which top out a little over 100m. All I know is that it works.
 

39 more replies
Relevance 36.9%

Ok heres the scenario folks. We have a user in the warehouse who has a machine that needs to hit the network. The existing network drop was to long and he had something like 50% packet loss. So I spliced it half way and put a switch in. He gets close to 0% loss now but still cannot surf the net or access our ERP system. He can barely check email and virus updates taken FOREVER. It uses an onboard NIC and windows 2000. Would adding a PCI NIC give me better signal? Also how can I boost the signal more.

Thanks
 

Answer:Ethernet length question

If it was my warehouse, i would setup a new closet\rack and i would run fibre to it from the main wiring closet. You then shouldnt have to worry about distance running cat5 from the warehouse wiring closet to workstations there.

Different nic most likely wont help unless there is something wrong with the onboard one.

Have you put a pentascanner, fluke or some other test equipment on the run to see how long it is and to verify the path back to your existing equipment?
 

22 more replies
Relevance 36.9%

I have to run some CAT6 for about 300ft.

the maxium for the ethernet standard is 100m which is about 328ft.

but since this is so close to the max would you recommend running CAT6 that far without a repeater.

will I experience signal lose and lose in performance?

-thank you-

greg
 

Answer:would you recommend this length of CAT6?

First I am curious why you are using CAT6. If you are talking gigabit then it is doubtful you will go 300ft.

I have successfully used CAT5e in runs of over 450 feet. Now, your overall cabling design comes into play a little. I've noticed that if most of your cable runs are short, you will be fine. For instance, here is a cable run at one of my schools:

<router -- 3ft -- switch -- 3ft -- switch -- 100ft -- switch -- 450ft -- machine>

While the one run is long, I am nowhere near the maximum end to end distance of a network (5*328ft). If you had longer runs in between, or more hubs, you could have problems.

<router -- 328ft -- switch -- 328ft -- switch -- 328ft -- switch -- 328ft --switch -- 450ft -- machine>

Would be likely to have some problems. The problem is that the beginning of a packet has to reach the farthest end of the network before the device finishes sending. If the device finishes before it gets to the furthest devices, CDMA/CD cannot work and packets could potentially become jumbled together.

Long story short, if you are using good hardware (3com, Cisco, HP, etc.) you should be more than fine, and see no loss at all.

Brian Taylor
 

7 more replies
Relevance 36.9%

Hey guys. I ran ethernet wire through my attic to my computer, which is roughly 90ft. from my router. I am using the standard Verizon DSL router, and from that I use a hardwire/wireless router. The wireless router is used for my laptop, but the 90ft. of ethernet chord is used to hardwire my computer. When I play CS, I often get ping spikes of up to 800...I'm so confused I don't know what I can do to lower my ping/latency. Any help or advice would be appreciated.

Thanks,

~Jay
 

Answer:Ethernet chord length

Cat5 and Cat5E can go upto 100 meters, or about 330 feet. One thing that you may want to look into, is to see if the cable is near any thing in the attic that could be putting out nasty Electro Magnetic Feilds. Which could cause distortion of the data on the wire. Which would make the PC and or router have to resend data and thus increacing the ping in your games.
 

4 more replies
Relevance 36.9%
Question: Sata Cable Length?

I was wondering if they made some shorter HDD Sata cables. Something along the lines of 4-8". The standard ones that came with the my mobo are just fine, but it'd be nicer if I could get my hands on some shorter ones for cable management.

Thanks in advance.
 

Answer:Sata Cable Length?

9 more replies
Relevance 36.9%

I am having to attend a clients site this week to troubleshoot connectivity issues. I don't know if its Wifi or his actual link to the internet (via radio) that is the issue.

Part of the information given to me is that he has AP's on ethernet runs in excess of 300 feet. I think 350' was the number I was given. This guy is going to be one of those difficult guys, as he presents himself as an "I/T person", and this wiring "worked before"....

So this is a bit of pre-visit leg work. ...and here come the questions...

- The recommended maximum run for ethernet is 280', allowing 10 at each end for connecting equipment...300' total.

- is it ever "OK" to go beyond that.
- what actually can happen at excessive lengths?
- is there a way to "boost" the signal so it can travel the distance?

These are straight from the VoiceMail Iw as forwarded.

I hate to be the bearer of bad news on jobs like these, but I have a feeling about this one....
I would think he'd be better served by some kind of wireless bridge, the kind of thing I've put in at other locations. While this is may be the case, the above situation is what I am going to have to address.

S~
 

Answer:Ethernet length limits

8 more replies