Computer Support Forum

Sony Vegas 8 rendering problem (I get sound, but no video)

Question: Sony Vegas 8 rendering problem (I get sound, but no video)

Hey all.

When I render a video using Sony Vegas 8 Pro, I get sound, but no video. I have followed several tutorials closely but still no luck. I render as a wmv file, change the size to 640x480, but still no video (just sound).

What I think happened is that I had set up Sony Vegas 8 a few moths back and had no problem rendering videos, but yesterday I started the program while holding down Ctrl and Shift (this resets all settings to their original positions).

Does anyone have any ideas how I can get the video to appear?

Thanks,

More replies
Relevance 100%
Preferred Solution: Sony Vegas 8 rendering problem (I get sound, but no video)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 75.98%

Hey everyone. I've been having this problem for a while now, and it's starting to get really annoying. Every single time I render my WMVs in vegas with the ff settings:

Video rendering quality: Good
Audio
-MODE: CBR
-FORMAT: Windows Media Audio 9.2
- ATTRIBUTES: 128 kbps, 44kHz, stereo (a/v) CBR
Video
-MODE: Bit Rate VBR
-Frame Rate: 30.000
-Seconds per key frame: 3
-Average Bit Rate : 4.5 M

I get the video to render completely, however, Vegas states that only 52% has been rendered (I hope that made sense).
It then starts to render from the start for about 2 seconds, freezes, then crashes the software completely.

I tried rendering in AVI and MPEG, but the quality depleted. AVI takes up so much space as well.

I don't know what to do anymore. Help please? Thank you!
 

More replies
Relevance 106.19%

This is a pretty weird problem that I can't get my head around. I recently did a Let's Play on my computer, but for some reason the file was split into 11 parts. That's not really a problem because I could just put them together in a video editor. So I tried out Sony Vegas 11 first. No matter what I tried rendering my 13 minute video as, it would have a constant green-flickering, and when there was no flicker the frame rate was horrible. Needless to say I gave up on Vegas 11.

So now here's my problem with Vegas 9. I rendered one small part of my video to make sure it worked, and it came out perfectly. So then I go and try to render the whole 13 minute thing, but no matter what I try I get this error. "System is low on memory. You may be able to reduce memory usage by closing other applications." Now, look at my specs below and tell me if that should be happening. It shouldn't, which confuses me. It renders perfectly on my friends PC with 2GB of ram (and his ram is lower quality than the 4GB I have). Could anyone tell me what's wrong?

Windows 7 Home Premium 64-bit (6.1, Build 7601)
Intel Core i5 CPU 760 @ 2.80GHz (4 CPUs), ~2.8GHz
4GB RAM
Page file: 2223MB used, 5962MB available
DirectX 11
ATI Radeon HD 5830

Answer:Major rendering problem with Sony Vegas 9?

Try this app,
VirtualDub download (at SourceForge) - virtualdub.org

You can load the first clip and then append the rest of them.
then in the Video Button on the Menu, select "Direct Stream Copy", and check the Audio menu as well and have that set to "Direct Stream Copy"
And then save the AVI.
Should only take you a couple of minutes to do, as long as Virtual Dub can load the files.

2 more replies
Relevance 97.17%

Ok so i've spent the past week putting together clips to make a video. It's about 13 minutes and im ready make it into a movie. When rendering it, i first noticed that the end file size is around 1 mb. That's not right. So i checked the other media types (avi, mov, etc) and the highest i can get is about 16 mb. So i do the 16 mb one to check (avi). It makes the movie, and i open it. The movie is about 24 seconds long and its completely grey. So i try making it a .mov which is about 6 mb. It renders it and i open it. Before opening, it says its 667 mb, but its only 8 SECONDS LONG AND IS COMPLETELY BLACK.

what in the world do i do?
 

More replies
Relevance 97.17%

Hi,

Was wondering how you render videos with xvid in Sony Vegas 7. Whenever I try to render using the default settings it comes out as a huge file.

Thanks.
 

Answer:Rendering in Sony Vegas 7.

7 more replies
Relevance 95.94%

Hello everyone.
My PC Specs:
http://www.mediafire.com/view/go733blt213bo8c/DxDiag.txt
My BSOD Dump File:
http://www.mediafire.com/download/ypdd8kzy1slp74p/012915-16224-01.dmp
Every time i go to render a video, i begin to hear a loud beeping come out of my computer. I think its the warning beep on one of the parts. I'm not too experienced with pc parts so I dont know what that is. This beeping occasionally comes on when I game too, however, when i render, its more prevalent. Eventually my PC just blue screens with a warning message. This didn't always happen so I'm not sure what's going on. I hadnt tried to render a video in like half a year due to the fact that this issue was happening back then. So when I tried doing it today, it did it again. Please help. Thanks so much!
 

Answer:BSOD When Rendering In Sony Vegas

Is there a error code in that blue screen? And what is the warning message?
 

1 more replies
Relevance 95.94%

Hi everyone. I just finished creating a video in Vegas 8, and whenever I try to render my movie, the render usually makes it to around 60%, and then an error message pops up saying:

"An error occurred while creating the media file 'Name of file'. This reason for the error cannot be determined"

I've tried maked .avi, .wmv, and .wma. I've even messed around with each template, and the problem still keeps occurring.

Please help me.
 

More replies
Relevance 95.94%

I've been making videos on Youtube for almost 3 years now. But I've just recently started experiencing problems while rendering a video.

For longer videos (5-10 minutes), I would look at the finished version on the clip and notice that it's skipping/lagging like crazy.
I record at 29.97 fps (standard NTFS) and 1280 x 720 dimensions with about the best rendering settings you can choose. I think 44.000 mhz sound and 30/29.97 fps video. Also, it says my CPU is running at 97% - 100%. GRR. I have AMD fx series quad-core 3.4 ghz. That isn't right. If you want to see the video I created as an example, I'll give you the link. But does anybody know why this is happening? I highly appreciate any response and I hope I can find a solution to this as quick as possible. Thanks.
 

Answer:Sony Vegas Rendering issue??

Hi, did you choose "Match media settings" as the tutorial recommends. Its normal for the cpu to work that hard while rendering. And its best left alone (the computer) while rendering is in progess. Also 29.97 fps complies with the American/Japan standard which is the NTSC standard versus the PAL standard which is 25 fps used in the rest of the planet.
Agree with you that the sony software works best at 1280 x 720
 

3 more replies
Relevance 95.94%

I've had a few errors with Sony Vegas 9 so far and I've gotten this far but this one has me annoyed. I want to render my video to MP4 and I've outlined my settings which I've used in the past no problem.

When I click save, it starts rendering, then it will stop and bring up this error:

Problem Description
Application Name: Vegas Pro
Application Version: Version 9.0 (Build 563)
Problem: Unmanaged Exception (0xc0000005)
Fault Module: C:\Windows\SysWOW64\ntdll.dll
Fault Address: 0x76F471D3
Fault Offset: 0x000371D3

Fault Process Details
Process Path: C:\Program Files (x86)\Sony\Vegas Pro 9.0\vegas90.exe
Process Version: Version 9.0 (Build 563)
Process Description: Vegas Pro
Process Image Date: 2009-04-17 (Fri Apr 17) 08:12:56

I've run "sfc /scannow" and there are no problems and I've tried editing my rendering settings slightly such as the bitrate.

Anyone have any solution? It's taken me ages to do this project

Thanks

Answer:Sony Vegas 9 Crash After Rendering

You do know that Vegas 9 is obsolete, yes? Plus you have not provided any info about your system or the type of render you are doing. The best place to post your problem is here:

Sony Creative Software - Forums - Home

Go to either the Vegas Movie Studio or Vegas Pro forum, depending on which version you have.

Note that there is an established fix for Vegas 9 on 64-bit systems that involved editing 3 codec DLL's. THis is well documented in the forums I mentioned and could easily be the fix for your problem.

1 more replies
Relevance 95.94%

Hi. i aint sure who to post this, however i do have a problem.
i have a windows seven, quad core,6gb of ram, and 1 tb of hardrive. and i i get a blue screen of death whenever i try to render a video into WMV( for youtube)
its a new computer, and i don`t wanna have to return it and lose all my footage.
please. can anyone help me?

Answer:Sony vegas pro 9.0e bsod rendering

Attach the crash dumps found in your C:\Windows\Minidump.

9 more replies
Relevance 95.94%

I've been using Sony Vegas for quite a while, made quite some videos with it and when I tried to render another one today, I saw there are no render templates. Went to check the Render Template folder in App Data/Roaming/Sony and the folder was empty. I reinstalled Sony Vegas, but the folder remained empty. So is anyone else here using Vegas Pro 12 and if possible could upload their Render Template folder (If using Win7 it is located in probably C:\Users\(user name)\App Data\Roaming\Sony\Render Templates\) somewhere online so I could download them?
Thanks in advance,
Taura

Answer:Sony Vegas Pro 12 Rendering Templates

Anyone?

1 more replies
Relevance 95.94%

Hi , can anyone please help me shorten a clip in sony vegas without having to re-render ?
I want to cut 2 minutes off a clip I have but rendering at 720x480 takes forever and actually turns into about a 4 gig file just for 15 or so minutes of film , which was only 260 meg to start with.
Any help on this would be great , thanks.
 

Answer:Sony Vegas Rendering Question

6 more replies
Relevance 95.94%

Hello --
Hope this post finds everyone well.
I wonder if someone might be able to help me.

I'm trying to render a project to the .wmv format in Sony Vegas 3.0. The project is a little over four minutes (one video track and three audio tracks). Whenever I try to render it, I receive the following message...

"An error occurred while creating the media file Error 0xc00d0bc2 (message missing)"

Any idea what this means and how I can solve it? I was able to render the project to MPEG-2 but I really want the higher quality of .WMV.

Do I need to pre-render the project first? If so, how do I do that? I've tried to find solutions in my manual and online but so far, no luck.

Any help anyone could provide would be greatly appreciated.

Thank you very much for your time, consideration and help.

Appreciatively yours,

Dougie Gee
 

Answer:Sony Vegas 3.0 Rendering Woes

I hadn't realised WMV was higher than mpeg2 (which is dvd quality). Have you tried rendering to AVI (the best quality) then converting that file outside of Vegas to WMV?
 

1 more replies
Relevance 95.94%

I have just recently installed Windows 7 64 bit because I'm getting 6GB RAM coming in the mail soon and microsoft wouldn't let me get a free version of 64 bit vista, so i did a clean install of this. i did a clean install for 2 main reason 1 for getting more ram and 2 for fixing this BSOD i got when rendering in sony vegas. Now i get a completely different BSOD then before
Whenever i try to render any videos in sony vegas pro 9 i get a BSOD
it said something about clock interrupted:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 101
BCP1: 0000000000000061
BCP2: 0000000000000000
BCP3: FFFFF880009E6180
BCP4: 0000000000000001
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1

If there is any other info i can provide please ask i really need to make these videos

Thanks

Answer:BSOD when rendering in Sony Vegas Pro 9

Yeah I'm running windows 7 build 7100....maybe i should ugrade to RTM 7600? idk where to DL it tho

9 more replies
Relevance 94.71%

Hello, had some random blue screens before, wasn't sure of what it was but this happened just now when I was rendering in Sony Vegas.

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Original
- an OEM or full retail version? The site I purchased my computer from pre built it for me but I did purchase the Windows 7 disk so I guess full retail.

- What is the age of system (hardware)? About 5 months
- What is the age of OS installation (have you re-installed the OS?) About 5 months, no re-install
Forgot to mention that the computer came over clocked. I also used a program called blue screen viewer which is highlighting hal.dll as a problem, don't know if that can be of any extra help.

Answer:BSOD while rendering in sony vegas, 0x00000124

Security Software: ??? Recommend either of these two:Microsoft Security Essentials - Free Antivirus for Windows

Good and Free system security combination.


Possible out of date drivers:
Code:
lirsgt fffff880`06c72000 fffff880`06c7f000 Sat Mar 06 12:53:01 2004 (404a2c1d) 0001a199 lirsgt.sys
atksgt fffff880`07e2a000 fffff880`07e79000 Sun May 17 07:36:34 2009 (4a1012e2) 0004fc56 atksgt.sys
lirsgt.sys
atksgt.sys
Neither look too serious, so don't worry about these yet.



Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\Tombo\Windows_NT6_BSOD_jcgriff2\032412-31153-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02e65000 PsLoadedModuleList = 0xfffff800`030a9650
Debug session time: Sat Mar 24 12:08:05.996 2012 (UTC - 6:00)
System Uptime: 0 days 8:03:12.777
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* ... Read more

2 more replies
Relevance 94.71%

Hello everyone.
My PC Specs:
http://www.mediafire.com/view/go733blt213bo8c/DxDiag.txt
My BSOD Dump File:
http://www.mediafire.com/download/ypdd8kzy1slp74p/012915-16224-01.dmp
 
 
Every time i go to render a video, i begin to hear a loud beeping come out of my computer. I think its the warning beep on one of the parts. I'm not too experienced with pc parts so I dont know what that is. This beeping occasionally comes on when I game too, however, when i render, its more prevalent. Eventually my PC just blue screens with a warning message. This didn't always happen so I'm not sure what's going on. I hadnt tried to render a video in like half a year due to the fact that this issue was happening back then. So when I tried doing it today, it did it again. Please help. Thanks so much!
 

Answer:BSOD Windows 7 When Rendering In Sony Vegas

Hello Keller1223,
Please post a snapshot with Speccy for better system details -How to Publish a snapshot with Speccy <<= Full Directions Here (only Copy / Paste the link)
 
Thank You ...

8 more replies
Relevance 94.71%

Hey there, I've been seeking for help for weeks and I finally made an account to get some here.

Recently, I have been experiencing lots of BSOD when I am playing games like Driver San Francisco and Counter Strike Condition Zero and Rendering some of my videos in Vegas Pro 11. Please help. But these runs smooth and perfectly in my laptop.

System BASE Specs:

Asrock N68c-UCC (NVIDIA GeForce 7025/nForce 630a Chipset)
AMD Athlon x2 Dual Core
NVIDIA GT9400 512mb GPU
1.5gb of RAM
320gb Hard Drive

I also attached the dump files.

Hope you can help me. Thanks!

Answer:BSOD when gaming and rendering in Sony Vegas Pro 11

These two were related to USBPORT.SYS.

Updating to SP-1 should fix the issue.

Please run the System Update Readiness Tool (SURT) and then update to SP-1
32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

6 more replies
Relevance 94.71%

Looks like the latest Vegas Patch + restarting helped it rendering 2 min HD Video in under 2 minutes
 

Answer:Vista - Sony Vegas Rendering Times

Sony Vegas 7 has been one of the FEW probelms I've had with vista. The Media Manager crashes everytime. Did you have this issue also?
 

2 more replies
Relevance 94.71%

Hi there

I've already checked this issue on multiple different DV forums, recently switched from Premiere to this Vegas so I'm still considered a amateur, but hopefully work my way around this soon.

anyway

The Issue: My Sony Vegas isn't giving me the video quality I need compared to lesser programs (ie; NeroVision)

I've been rendering my videos in Sony Vegas from raw DV avi's to compressed Xvid/MPEG-3 .avi files.

I've been comparing that NeroVision's renderer has a better quality video with exactly the same compression settings, and is larger in terms of file size only by about less than 1mb's (Sony filesize: 2.14mb's Nero filesize: 2.96mb's)

Picture Legend:
1)NeroVision
2)Sony Vegas (May not be noticeable with the pictures, but it's cloudy and blurred, and possibly off-color by a degree or less.)
3)RAW DV

I've tried all other forms of compression, and even uncompressed, but Xvid is the standard for best quality with filesize. I've used Mpeg which are too big, and different AVI compressions, and they're no better.

Why don't I just use NeroVision? NeroVision doesn't have ANY features worth mentioning. It's made for stringing homeDV's together with transitions, nothing more. I need to be able to control my videos with Freeform.

I'm annoyed that the quality is not satisfactory considering it IS Sony Vegas, and Nero is, well, Nero (And you can't hear it, but the CCIT A-l... Read more

Answer:Solved: Sony Vegas 6.0d Rendering discontent

Since everyone avoided my post like the plague, I went and tinkered around a bit...

I guess I fixed the problem, I had my lower fields scanned first, so I set the field order to progressive, minor Color correcting and I think I should be happy.

Thanks anyway
 

1 more replies
Relevance 94.71%

I rendered a video no less than 4 days ago without any problems, yet today when I try to render a video using Sony Vegas Pro 12, the windows on my screen will stop responding (I can still move my mouse around by this point) and the computer will crash (BSOD). This came as a complete surprise to me, since I've been using this program to render projects for quite some time now. I tried turning off GPU acceleration, but my computer would still come to a grinding halt before blue-screening. I even went to the lengths of installing Sony Vegas Pro 13, which turned out actually BSOD'ing my computer when starting the program up.

Any help would be greatly appreciated.

Answer:BSOD after rendering in Sony Vegas Pro 12, starting pro 13

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa800bb94b30, Terminating object
Arg3: fffffa800bb94e10, Process image file name
Arg4: fffff800035e3270, Explanatory message (ascii)

Code:
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Run chkdsk. Disk Check

Uninstall DaemonTools, a known cause of BSODs.

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
3. Double click the executable to open it
4. Click the button shown below

If the button it is grayed out, as shown in the image, there is no more SPTD installation on yo... Read more

9 more replies
Relevance 93.89%

One of my friends are having issues with rendering videos in Sony Vegas . He says it's taking longer then usual and it also crashes as well , here are his system specs. Any solution to this problem.

Answer:Sony Vegas Pro Rendering Takes a Long Time....

Hey man I might have a solution for you I made a YouTube Video on how to fix the Sony Vegas pixel problem but I also cover the best render for quality and still have a fast render time! that should help you mate hope it does
(I am not look for likes for views or anything like that )

http://www.youtube.com/watch?v=sb--pKCOv9E

5 more replies
Relevance 93.89%

Hello everyone,

Recently I started getting BSODs while I was playing Test Drive Unlimited 2, The Division and other games. Then I found out my PC wil BSOD while trying to render something in Sony Vegas.

I already tried memtest and tried running Intel Processor Diagnostic tool, upgraded all drivers too, and still haven't found anything.

Iam attaching screenshot of error showing in WhoCrashed and archive from DM Log Collector.

PS: If you will need to help translate something from Czech (if there is going to be anything) Iam more than willing to help.

More replies
Relevance 93.89%

Hello! I seem to have some problems when rendering videos with Vegas 6.0. At some points the video becomes extremely laggy. (In certain points. Because even if I rerender the video for 100 times the problem occours in the same parts of the video.). I need those videos at 1280x720 resolution, but I just can't render them with out lag... (Lower resolutions are lag-free though...)

What help do I need:
Please specify the lowest possible settings for Vegas 1280x720 resolution to render the video. I think that my stupid old computer is to be blamed.

Or maybe there is something else I can do to prevent this problem?

regards,
archer9
 

Answer:Solved: Problems with rendering videos with Sony Vegas 6.0

I think I found a solution. But the video size is now much bigger. But I guess I'll have to live with that.

Sorry for littering your forums.
 

1 more replies
Relevance 93.89%

Hello,i recently built a custom PC with AMD FX 8320 3.50 Ghz,MSI 760GM-P23(FX) (MS-7641),Saphire 7770 Ghz edition 1GB,8GB DDR3 1333mhz RAM and 500gb hard drive.The computer works perfectly untill i try to play Battlefield 3,Need For Speed Most wanted 2012 or render a WMV file in Sony Vegas.Sometimes the PC will just restart without any error but most of the times it will just get BSOD.The BSOD sais that is collecting dumb files and then the system restarts saying something caused the system to shut down.I also tried reinstalling windows but nothing happened.Here are some information i got from EventViewer.

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2013-03-07T14:15:36.718017900Z

EventRecordID 4344

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer user-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 30
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0
If you can help me solve my problem i will be thankful.

Answer:BSOD playing Battlefield 3 or rendering in sony vegas

Please follow the Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Relevance 93.07%

Ok So I had just gotten a new computer and was downloading all my programs and stuff...and couldn't find the programs anywhere besides sites that were with viruses and porn and crap...and So My comp immediately got virused...So I couldn't render in vegas anymore and it was really making me mad...it would just say an unexpected error occured...and would shut down..either that or it would go til like %40 and then just like stop going up...
So I decided to Re-install my OS cuz I just though if i wipe my hdd clean then re-install the problem wont happen anymore....Well I then decided to get 7 Ultimate well I downloaded all my programs..this time safely and the first program i downloaded was AVG so that I knew everything was safe..
So then i dled my programs and all...Including Sony vegas pro 8.0....So I already had some .veg files saved from before i installed 7 and so It opened in vegas perfectly...well then I try to render and right after I click render it gives me this error....Vegas stopped working correctly Windows is trying to figure out the problem and will tell you if we found it...That wasn't word for word but along those lines...So I am about to throw my $500 computer outt he window I'm so pissed...oh yeah btw its a new computer my friend just built 4gbs of RAM it has a 2.3ghz quadcore processor and an ATI Radeon HD 4670 graphic card with 2809mb total memory....And so I know its not because the computer cant support it or something...
So can anyone h... Read more

More replies
Relevance 93.07%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: c5
BCP1: FFFFF80071FF0560
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80001F91872
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini011710-04.dmp
C:\Users\chris\AppData\Local\Temp\WER-2885737-0.sysdata.xml
C:\Users\chris\AppData\Local\Temp\WER3330.tmp.version.txt

Answer:vistax64 ulitmate BSOD error when rendering mp4 with sony vegas pro 9

Upload Dump Files:
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service - then post the link to it.
Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump

12 more replies
Relevance 93.07%

All of my clips are NTSC DV Widescreen (720x480), pixel aspect ratio 16:9. I want to render out the finished video project now as the same size and ratio. But nothing I've tried thus far will give me a widescreen output once I watch the finished video.

I'm usually quite good with codecs, formats, and such, but this one has me so confused. I've also tried it both with and without the "Stretch... Do not letterbox" option checked, to no avail. Uncompressed either crashes the program or comes out standard size, sometimes with faces a strange color-keyed-out grey. Any suggestions?

Answer:Sony Vegas Movie Studio Pro 9 - Rendering NTSC Widescreen?

It was merely a playback error due to codecs in WMP.

1 more replies
Relevance 90.2%

Hi, I just downloaded Sony Vegas 8.0, my goal was to make videos, what i cannot do since everything on put on this program turn into music file. Every images are cut, I tried everything I had (video), there is absolutely nothing left I can put in. I wish to know how i can convert these files into videos on Sony Vegas. The files are in .avi.

Thank you very much for your help.

PS: If i didn't look well at the FAQ, please send me the link explaining how I can do it.

More replies
Relevance 88.97%

--------------------------------------------------------------------------------

when i try to opend a window media movie the program vegas 4.0 freeze.ok i have a gateway 2.4 ghz with 756 ram.also my video card is a nvidia geforce mx 400 with 64 mb.someone please tell me i i use a radeon 256 mb ddr graphic card or something else fix the problem?thanks for the attention.the program is for edit videos
 

More replies
Relevance 88.15%

Hello,
I'd encountered a problem while I was trying to encode a 4:23 minutes long AVCHD clip with my Sony Vegas program.
It goes like this: I imported that clip, dragged it into the timeline, cropped about 20 seconds of it, added a transition in the middle (the cropped part), rendered as Sony AVC - AVCHD 1920x1080 PAL template and saved.
The size of the original clip is a 530 MB, and the size of the new encoded one is 480 MB which, so far, makes sense.
The problem is when I try to play the NEW clip. The first couple of minutes runs smoothly, quite the same as in the original clip. So far so good, but after that (and actually, it's even a few seconds after the cropping-transition) - the clip begins to go glitchy and jumpy, and you just can't watch it normally.

Does anyone have an idea why this problem occures? And even more important - how can I get it to be fixed?

Thanks a lot!
Jonathan
 

More replies
Relevance 82%

Well, maybe I'm just dead in the water here, but I spent 5 hours yesterday wittling away at a project in Windows Movie Maker. I cut together a music video using a ripped .avi of a movie (this is probably where my problem comes in ... ). After all that work, I rendered it to view my final piece. As I clicked play, I got the audio, I got my transitions but ... no video. None.

Am I SOL? Is there anything I can do to get the video? I've tried the DV-AVI format, nothing. I've tried viewing it in multiple programs, including VLC, WMV, even realplayer. Nothing. I'm probably SOL, but I just wondered if anyone had suggestions?

Also, anyone ever use the program handbrake to rip DVDs? Would that possibly solve my problem? I know I might have to just go back in and re-cut the entire video with the new rip, but ... if it'll work, then that's all I need to know.

Technologically Frustrated,
Jules
 

Answer:WMM problem! Sound no video after rendering!

Ripped .avi---emmmmmmmmm, sounds like piracy and that will get you busted in here. DO NOT PIRATE MOVIES--
 

2 more replies
Relevance 79.13%

hi guys, i was just wondering if there was a problem with vegas video 4 and the xvid codec. i used another program, videomach, to compress a bunch of bmp images into a xvid coded avi file. now, when i go to open it up with vegas to add effects and such, it wont open at all. but, it will open other avi movies that are NOT coded with xvid. so, is this a vegas 4 problem, and that it doesnt like the xvid codec or something? any help on this would be appreciated.
 

More replies
Relevance 78.31%

I am capturing a half hour long video from a dv recorder to my hardrive using Sony Vegas studio and the hour and a half long clip is 20gb.

Am I doing somehting wrong? How do you guys and gals that use Sony Vegas Studio do it?

Also I dont like the fact that it breaks the video into several clips. How do I capture so it is one video?
 

Answer:why is my captured video so big (sony vegas)

You can capture it in full quality which you must be doing or lower quality......you can also capture it for editing in much lower quality and work with it as a much smaller file until you want to render it for burning to disk....when render to burn to disk you have then camera plugged in and it takes the full quality from the camera.

Have you got a extra Hard drive for those big files because you will need one.
 

3 more replies
Relevance 77.49%

Hello everyone, I sure do ask a lot of questions but hardly give answers, I apologize for this I'm just not very helpful when it comes to most things because my knowledge is heavily limited, now on to my problem.

I've recently started recording gaming videos with Fraps, and the video that comes from Fraps is fine, however after I render it in Sony Vegas for upload to Youtube, the sound becomes out of sync. The sync isn't that bad but if you pay attention or watch for a long period if time, you start to notice it.

Below I have linked to a video of mine that has this problem. The sound is almost synced correctly, however there is a short delay and I would REALLY like to fix this as it makes the videos less intriguing. You'll really notice it during the fighting and also with the talking.

http://www.youtube.com/watch?list=PL6677465FB7138E0B&v=9Kh5yHuuhxg&feature=player_detailpage#t=638s
 

Answer:Rendered Sound Out of Sync (Sony Vegas Pro 10.0)

Anyone?
 

1 more replies
Relevance 77.49%

I am using Sony Vegas Pro 9.

For example, Say my project setting is a 50x50 vid.

Now say I import a 25x25 vid. It will show a vid half the size in the preview part.

NOW say I import a 75x75 vid. Here is my question and problem:

Vegas resizes the 75x75 vid to fit within the 50x50 project settings. I don't want it to do that. I want to be able to import the 75x75 vid *AS* a 75x75 vid with it's full resolution intact. When it resizes the 75x75 vid to a 50x50 vid, it affects the resolution to crappy.

Plz tell me I can do this because if I can't then I will have to cleanse the Earth of this program with fire.

And BTW, yes, I know there's Final Cut Pro too. I don't have a Mac at home yet and Adobe's video editing prog doesn't like my POS computer. But I do like both Vegas and Final Cut pretty much equally. They both have their pros and cons and can do certain things easier than the other. Both work so I use them both when I can.

EDIT: I was thinking more on this issue. Maybe I'm supposed to do it in reverse. My Project settings are supposed to be the largest width and height of the video's that I'm using and I'm to set something else that sets....ummmm....the size of something else. I dunno. Nah, that can't be it cuz, I dunno. Just thinking aloud. I'm freakin' confused.
 

Answer:Sony Vegas Pro 9: Importing video question.

yes you can do this, resize it use the pan/crop tool on the clip itself. in the properties of the clip, I tend to "disable resampling" and check the field order to make sure it's not blending two feilds together (which will look crappy) then in the project properties check the de-interlace mode, field order and the render quality.
 

2 more replies
Relevance 76.67%

I'm trying to get a youtube partnership, by making my own webshow about games, movies, you know the drill. Of these two I only tried Vegas Pro, and it's great although pretty complex for newcomers xD

But recently i've heard about Adobe Premiere, and i've only heard great things about it. It is rather expensive though, which leans me more towards Vegas. But still, i'd like some input on this.

Which of these two professional video editors is better, Adobe Premiere or Sony Vegas Pro (features, ease of use, performance, specs, etc.)?

Answer:Adobe Premiere vs Sony Vegas Pro - Which is the best video editor?

For YouTube stuff I doubt you will need the additional capabilities of Vegas Pro. I'd suggest Vegas Movie Studio instead. Pro has stuff for multi-camera shoots, compositing, and things associated with big-screen feature films. Plus it is much more expensive than Movie Studio - and Premiere as well.

I personally shy away from all Adobe products (other than Photoshoip Elements) but I have tried all the other video editors and found Vegas to be the most logical and easy to use. I agree it does seem a bit daunting at first, but the inline Help screens are very good and once you learn how to do things it all flows very seamlessly. I'd say check out the free demo of Movie Studio before you make a purchase that is more expensive than your needs.

1 more replies
Relevance 76.67%

He guys,
Does anyone know if an Alienware 13 with i7 processor is fast enough to edit 4K video's in Sony Vegas Pro? I currently own a desktop computer but i'd like to have a laptop for portability. Futhermore i'd like to know if an Alienware laptop works exactly the same as a 'normal' laptop like the XPS laptops. 

More replies
Relevance 75.85%

I bought easy cap and I am using it with my laptop. Ulead video studio 10.0 came with it. Now, I don't know if the video editor, the easy cap itself or the camera but when I go to capture the video it lags so much. It doesn't lag when I watched it in the preview in Ulead Video Studio, so I don't know what the problem is. In Sony Vegas when I go to capture it, it doesn't lag but the video itself looks crappy. It looks like it is choppy. Does anyone know how to fix this. I don't believe its the camera because I tried to capture a video through my xbox and it still did the same thing. Can somebody help me?

~BoonDock11
 

Answer:Problems with Easy Cap & video editing with Ulead and Sony Vegas 7.0

sounds like a lack of drivers for the camera. alot of windows os's support a webcam and other camera devices natively but the support you get with them is HORRIBLE.
 

2 more replies
Relevance 75.44%

This post is to hopefully throw some more light onto a problem that I've only just found a workaround for.
The workaround is not a fix by any means but it allows the software in question to work again.

Problem :
Sony Vegas 10.0c ?Stopped Working? and no amount of uninstall/reinstall and/or deleting all traces in the registry would fix the problem.
The problem is apparent with all versions of Sony Vegas prior to 10.0c, Sony Vegas Movie Studio HD, and associated packages (DVD Architect Studio 5.0 and Sound Forge Audio Studio 10.0 etc)

Diagnosis and workaround:
Turns out that there is some sort of conflict when Microsoft Office 2007 is installed too.
?WowExec.dll? in the Office install folder is the offending article and as soon as the dll is renamed (wowexec_bak.dll) the ?Stopped working? issue vanishes. I don?t know if either Microsoft and/or Sony have made a fix for this problem but renaming the WowExec.dll file is a temporary workaround. A few error messages may appear when running Vegas for the first time when WowExec.dll is disabled but it allows Vegas to run again.
This issue was on Windows XPSP3.
Anyone else encounter this problem? If so, is anyone aware of a permanent fix?

J

Answer:Sony Vegas Pro / Vegas Movie Studio HD 'Stopped Working' Fix. Windows XP SP3

Its NOT wowexex.dll at all!! it's Grooveutil.dll !
I don't know what I was thinking but it wasn't this!

1 more replies
Relevance 75.44%

Why do I lose contrast on my video when rendering it in .wmv format in Sony Vegas Pro 9.0? I've spent hours, once again, trying to render my video for YouTube and pretty much the only good video type seems to be the Windows Media Video V11, the quality looks good, but when rendering about 30 percent of the contrast disappears, so it basically gets more grey. This haven't got to do anything with my media players' overlay-settings since it looks like this bad in YouTube too. And if you don't know why this happens, suggest what would be an other good codec for rendering? I have downloaded ffdshow video codecs, which has h.264, mpeg2 etc. but my Sony Vegas crashes every time when I try to render with it. So any suggestions?

Solution( ? ): Well, I went to my ATI CCC Video-settings and started clicking stuff and came across "Dynamic Range - Full ( 0 - 255)" no idea what this means though perhaps referring to High Dynamic Range? I checked it and the .wmv looks exactly how it's supposed to. There's now the right amount of contrast. I wonder why this wasn't checked by default? Still, I'm not sure how the video is going to look on YouTube, I have to try it out. Here's a picture: http://img143.imageshack.us/f/52534500.jpg/

Solved: Yes, it now looks exactly right when uploaded to YouTube. I remember having this problem for years, I'm glad it solved so easily, I never thought it could be because of graphic card's video se... Read more

More replies
Relevance 74.21%

Hooray for codec BS. I've installed K-Lite FULL codec pack, as well as DivX, but ANY .AVI file I put into Vegas only loads the Audio track, while saying the Video track is offline. I load the exact same file into Vegas on another PC and there is no problems whatsoever.

Solutions? I mean, this is a fresh install of Windows XP here.
 

Answer:Sony Vegas refuses to load .AVI video files correclty. Codec nonsense.

From a Google Search for MJPEG codec for Vegas, ironically, this thread showed up.
Why can't Vegas see the video from a file captured by a still camera? Audio plays, just not video.
Most digital still cams use an MJPEG codec to compress the media. You'll need to install an MJPEG codec. Visit:
http://www.matrox.com/video/support/ds/software/codec/home.cfm (freebie) <-- I filled out the info, and it doesn't download anything, keeps timing out.
http://www.morgan-multimedia.com/
http://www.mainconcept.com
http://www.pegasusimaging.com/picvideomjpeg.htm
http://www.softpile.com/Multimedia/Video/Review_10792_index.html
to find an MJPEG codec/decoder.

-Ed
 

4 more replies
Relevance 73.39%

i have a few things that i want to do to a .mov clip in sony vegas that i was editing in final cut pro, borught the clips home and when i put them in sony vegas they only show up as music files, when i play them in quicktime im told to download something, when i play them in VLC player it works perfectly? some1 tell me what im doing wrong please?
 

More replies
Relevance 73.39%
Question: Sony Vegas problem

I have just loaded sony vegas and just started playing around with it i use a kodak easyshare. when i load my videos on to the computer they are .mov files, i downloaded quick time so they would open. now when i import the .mov file into vegas it makes another .skf file where the .mov is located. so i have to keep delete all these stupid .skf files that are popping up..... i probly caused this to happen my self but im not sure how does any one know how to stops this?
 

More replies
Relevance 73.39%
Question: Sony Vegas Problem

 Hello, I have a Windows 8 64-bit Lenovo Ideapad Y500 laptop. Recently, I did a complete reset of my laptop. After the reset, I installed AVG Free Antivirus, and all my other software that I had before, including Sony Vegas Pro 11. However, even after updating Windows from the control panel, the video clips I have in Vegas appears different than before. The video clips and its effects were running fine before the reset. Now, the effects seem to appear different on the video clips.  Any ideas on how to fix this? Thanks.

More replies
Relevance 73.39%

when i try to opend a window media movie the program vegas 4.0 freeze.ok i have a gateway 2.4 ghz with 756 ram.also my video card is a nvidia geforce mx 400 with 64 mb.someone please tell me i i use a radeon 256 mb ddr graphic card or something else fix the problem?thanks for the attention.the program is for edit videos
 

Answer:problem with sony vegas 4.0

there seems to be a “newer version of vegas 5.0 are there any patches for your program ( vegas 4.0 ) , and updates ? have you updated your operating system ?
have you scanned for any viruses , adware , malware ? have you added any new component ( s ) to your system ? any system changes ?did this just start or has this been an on-going thing ? yes for video editing you should have a better graphics card , and what are your system specs ..?
cheers
 

1 more replies
Relevance 73.39%

can you help me with my Sony Vegas?

im using SV 8.0, i got it in a while, and i don't know what happened. It crashes in the startup, in the Initializing Scripting... I've tried re-installing but it didn't help.

thanks in advance help...
 

Answer:Sony Vegas Problem.

thanks in advance help...
 

1 more replies
Relevance 72.57%

I have three tapes from my camera, taken at a single event. I want to select some video frames only, without sound, from two of them and place in as video overlay into the master version in Vegas 8. I have captured the tapes into separate sessions with Vegas, want to make my selections from tape 2 and 3, save just the video portion not the audio, and move those into the primary Vegas session. (1) I cannot seem to be able to cut off the audio track, only mute it, while working on session 2 and 3. iIm concerned that this will result in an over-write of audio track in the primary session when imported. (2) I have not figured out how to save the portions of the clips from tape 2 and 3 so that i can then insert them into the primary session.

Any ideas? I cannot find the answers in SONY Vegas 8 Help nor online...
Dave
 

Answer:SONY Vegas 8 editing problem

10 more replies
Relevance 72.57%

iam not able to install sonyvegas pro 9 on my win 7 32 b it..it gives the error make sure administative privileges on lthis system..pls help me..as im very much depended on this software..plllllllllllllllls help needed urgently.thanx in advance

Answer:problem installing sony vegas pro 9

From what you say, it looks like UAC is involved here.

Are you using a standard user account or an administrative one?

If you're using a standard one, your PC may have UAC configured to deny administrative rights to simple users no-matter-what (you may want to read THIS for further information).
If it asks you to authenticate, on the other hand, you'll be asked to provide details (username - password) for an administrative account to proceed.

If it just asks you to confirm to proceed, you'll probably be already running it as administrator, so you'd just hit "Yes" or "Continue" to get past the UAC screen.

By the way, shouldn't this be moved to "software" instead?

5 more replies
Relevance 72.57%

Hey, I post on this forum occasionally and it never ceases to fix my problem. I can't find a fix for this so I decided to ask here.

In sony vegas pro 8, my effect browser was just suddenly "popped into" the rest of my software. I took a screenshot of it below.

http://img18.imageshack.us/img18/2329/builtin.jpg

I have the feeling that its a very easily solvable problem that I can't manage to fix...
Thanks in advance.

EDIT: I can't finish my movie until I figure this out...its really frustrating.
 

Answer:Easy Sony Vegas Pro 8 Problem

6 more replies
Relevance 72.57%

Hello! I am new to editing with Sony Vegas. I have Sony Vegas Pro 9.0 I recently made a series of videos. I used many smaller clips to make these videos. Those small clips are now deleted, but I recently realised that I have made the videos with wrong resolution and they are also too big. I figured that I could just drop these files in to vegas and rerender them with the proper settings. (They are now 720x480 but I need them 640x360. And the file size must be also be smaller.)

here comes the problem: when I finnish rerendering those files, they become very blurry. Especially on sharp camera turns. It's horiible to watch them. It seems they hurt my eyes at some points. What is causing this???

These were the settings I used to render the original 720x480 videos:
http://imgur.com/DU0SN.jpg
http://imgur.com/FPIUw.jpg

These are the settings that I use to rerender the new videos:
http://imgur.com/cgdtn.jpg
http://imgur.com/9Os3w.jpg

What could POSSIBLY cause the blur? I have experimented and changed a lot of different settings including Motion blur, but nothing helps. So... I am desperate now.
 

Answer:Frustrating Sony Vegas 9.0 problem

Come on people. I'm sure somebody can help me.
 

1 more replies
Relevance 72.57%

I'm trying to render a video off Sony Vegas 8 Pro, and it always freezes and I have to Ctrl+Alt+Del to close it. Anyone know how to fix this problem?
 

Answer:Solved: Sony Vegas 8 Pro Problem

try re-installing Sony Vegas or consulting Sony Creative software to take it further
http://www.sonycreativesoftware.com/corporate/contacts
 

1 more replies
Relevance 72.57%

Im using Sony Vegas 6 on Windows XP and this problem immerged out of nowhere.
When I press the play button to preview a movie I'm working on, it gives me the following error:
An Error occurred while starting playback
An Invalid Device was specified

When I click the detail button, this is added:
The playback device does not support the output format.
The playback device does not exist
I tried going in Options>Preferences>Preview Device
and they are all unavailable for some reason.

Please help.
 

Answer:Sony Vegas 6.0 problem with Preview. Please Help

nobody knows?
 

2 more replies
Relevance 72.57%

Hi I have just brought Sony Vegas Pro 11 and when I open it from a shortcut it gets stuck at "Initializing GPU accelerated video processing".

I have seen other posts saying change compatibility mode but I am not a expert at computers so I don't know exactly what to do, any sort of help would be appreciated!

Thanks,

Chris
 

More replies
Relevance 72.57%

Before I bought the real thing, I had an expired 30 day trial of vegas studio 9, which I uninstalled prior to buying it. I can install the disk, no problem, but when I open the icon on my desktop, it says that:
Your Vegas Movie Studio Trial has Expired
If you would like to continue using Vegas Movie Studio software click Buy Now below.

But I have already bought it, and I do not want to waste another £30 by buying it again. Is there a way to get rid of this message? I have tried uninstalling and reinstalling, and turning it off and on again.

So can anyone help me out?
 

Answer:sony vegas 9 registration problem

Uninstall your Vegas Movie Studio with "Revo Uninstaller". It will remove completely Vegas Movie studio even form registry entries.
After that reinstall it again.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
 

1 more replies
Relevance 72.16%

I have a problem. I have a vegas file. It previews fine but when i render it, the first frame flashes and everything goes black. Please help!!

More replies
Relevance 71.75%

Recently I was developing a video in which I was using different formats such as MPG and AVI - I was trying to get the best quality and decided later that the AVI files were my best choice. Problem was, when I tried to PREPARE the files for burning in Sony DVD Architect, it would go through the entire file until it reached the end, then gave me an error message stating the a SIFF file header was missing. What's that and what can I do to make sure this doesn't happen again?
BTW - I later converted ALL my files to AVI, and there was no problem. Could it have been that I tried to mix file-types on one DVD?
 

Answer:SONY Vegas DVD Architect file problem

If no one can help here try here http://www.sonycreativesoftware.com/forums/showtopics.asp?forumid=12
 

1 more replies
Relevance 71.75%

I have just installed windows vista ultimate on my computer and sony vegas 7.When I try to launch sony vegas 7 it says that my computers virtual memory is to low.I dont understand how is could be when I have 2Gb of ram and 160gb HD.I increased the virtual memory to 4095 initial and 4095 maximum and it still doesn't work.I re-installed it and still doesnt work. PLZ help!!!
 

More replies
Relevance 71.75%

i tried to export my vegas project and i signed up and stuff just to see an error that prevents me from publishing it. I tried to render it and when i open the file, my movie is a black screen.
 

More replies
Relevance 71.75%

Hello. I had Sony Vegas and it handled .avi files perfectly, I had made a video which was mostly made up of .avi files.

Then I had problem with codecs and now Vegas doesn't handle them and it says 'media offline'. It plays the sound but not video. But .avi files work fine when I play them! I tried uninstalling and reinstalling vegas, plus the codecs but to no avail.

Only difference I have seen outside of Vegas is that the thumbnails in folders do not show up for .avi files anymore. I think whatever would make them show up would possibly make them work in Vegas too.

Does anyone have any help?

More replies
Relevance 71.75%

When trying to edit a .avi file in Sony Vegas Pro 8.0 I get this message: Stream attributes could not be determined.
This is not the first time this have happened and I usually solve it buy running a codec finder program and download the suitably codec. But this did not work for all of the files this time.

The codec I downloaded this time was: Fraunhofer MPEG Layer-3 Audio Decoder

I get this information when I run the files that did not work in a codec finder program:
128 Kbps, 48,0 KHz, 16 bits, 2 channels, MPEG Audio (MP3) (Version 1) (Layer 3) (Joint stereo / MS Stereo)

In the files that worked because of the codec I downloaded I get this information:
128 Kbps, 48,0 KHz, 2 channels, MPEG Audio (MP3) (Version 1) (Layer 3) (Joint stereo / MS Stereo)

The only difference I can spot is the 16 bits part. Is it this that is the problem?

I have Windows Vista.
Help would be highly appreciated!
 

Answer:Audio codec problem in Sony Vegas Pro 8.0

6 more replies
Relevance 71.75%

Today I was editing with Sony Vegas Pro 8 when the following message appeared, "An error occurred while starting playback. The system is low on memory. You may be able to reduce memory usage by closing other applications." I tried closing other applications, and it still didn't work. I then checked the memory usage of my computer, and it appeared fine. I took a print screen of it just in case (seeing as I'm not exactly computer savvy).



I've used Sony Vegas Pro 8 for almost two years now and I've never had a problem like this before.

Answer:Memory usage problem with Sony Vegas 8

I note you have 62 processes running - somewhere in the 30's is 'normal' I believe.

1 more replies
Relevance 71.75%

I've been using this guide to render my movies - I want to be able to upload them to Vimeo in HD. I'm recording with a Canon HF100 in 60i, so the video is de-interlaced and encoded using H.264.

http://eugenia.gnomefiles.org/2007/11/09/exporting-with-vegas-for-vimeo-hd/

Everything works great, but the moment I try to render a movie that's actually kind of long (it's an hour long Christmas movie), it doesn't work.

It's odd - all the tests I do (sample clips of the few few minutes) work perfectly. The moment I let it go all night an render the entire movie, it gives me the following error when trying to open the video:

Error -2048: Couldn't open the file Christmas-2009.mp4 because it's not a file that Quicktime understands.Click to expand...

Does this have something to do with the file size? The resulting rendered video is pretty huge; 2.13GB to be exact. I was planning on burning this to a DVD, and simply playing it in a PS3 when we wanted to watch family videos.

Thanks in advance for any help.
 

Answer:Vegas Pro 8 - Rendering Movies

caleb2001r said:


I've been using this guide to render my movies - I want to be able to upload them to Vimeo in HD. I'm recording with a Canon HF100 in 60i, so the video is de-interlaced and encoded using H.264.

http://eugenia.gnomefiles.org/2007/11/09/exporting-with-vegas-for-vimeo-hd/

Everything works great, but the moment I try to render a movie that's actually kind of long (it's an hour long Christmas movie), it doesn't work.

It's odd - all the tests I do (sample clips of the few few minutes) work perfectly. The moment I let it go all night an render the entire movie, it gives me the following error when trying to open the video:

Does this have something to do with the file size? The resulting rendered video is pretty huge; 2.13GB to be exact. I was planning on burning this to a DVD, and simply playing it in a PS3 when we wanted to watch family videos.

Thanks in advance for any help.Click to expand...
What are the specs on your computer?
 

10 more replies
Relevance 70.93%

Hello there.

I've recently encountered this problem where Sony Vegas crashes immediately during the startup once it reaches the Initializing UI part. Here's a screencapture:

I've tried all possible solutions: Reinstalling Vegas, and reinstalling the Visual C++ that comes with the Vegas installation. I've searched every possible thread out there for solutions, but no one seems to know anything. I sincerely hope someone here does.

Any help is greatly appreciated.
 

Answer:Solved: Sony Vegas Pro 8 Crash Problem (Initializing UI)

15 more replies
Relevance 70.93%

Hi, well a little FYI about my problem...

I have Vista 64 Bit.

I downloaded Sony Vegas 9, and i could never get the video to fully work. it would play sound, but no imagine. the video file is Xvid.

I downloaded the K Lite Codec Pack but it doesnt seem to help in vegas although it plays in Windows Media player which it use to not.


anyway i did a little research and there is no codec pack yet to allow it to play in vegas 9, so i downloaded 8.

still have the same problem. I have Vegas 8 64 bit.

basically was wondering if anyone knew a codec pack that will play my Xvid in sony vegas ? it doesnt even play in Window movie maker

please help....


cheers guys

Answer:Sony Vegas Problem (no imagine) need codec pack

Originally Posted by nick1407


Hi, well a little FYI about my problem...

I have Vista 64 Bit.

I downloaded Sony Vegas 9, and i could never get the video to fully work. it would play sound, but no imagine. the video file is Xvid.

I downloaded the K Lite Codec Pack but it doesnt seem to help in vegas although it plays in Windows Media player which it use to not.


anyway i did a little research and there is no codec pack yet to allow it to play in vegas 9, so i downloaded 8.

still have the same problem. I have Vegas 8 64 bit.

basically was wondering if anyone knew a codec pack that will play my Xvid in sony vegas ? it doesnt even play in Window movie maker

please help....


cheers guys



if the game is 64-bit, did you d/l the k-lite 64-bit codec?

5 more replies
Relevance 70.93%

After I finished a 110 minute video, no matter what video format I choose, Vegas 8.0c simply crashes with no warning and no error report. Please help!
 

Answer:Vegas 8.0c Crashes when rendering any format!

6 more replies
Relevance 70.93%

Hello everyone (this is my first post here btw   )I am facing an issue with sony vegas pro 13 which when as soon as I click render it says vegas pro has stopped working..
I have tried EVERYTHING, please help me!!
I am on Windows 8.1 and no, it's not a CPU problem.

Answer:Vegas Pro Has Stopped Working [When Rendering]

Please anyone?

2 more replies
Relevance 70.11%

While working on Vegas Pro 8 (Rendering), after several minutes it shut down completely. In the past this has never occured, ever. I retried and again and again it shut down, and I re-booted. Later I was working on Photoshop and after an hour, once again it shutdown.

Can you assist me?
 

Answer:My computer shuts down during rendering Vegas Pro8

Welcome to Major Geeks!

This is the Malware Removal forum and problems with the programs you have mentioned should be discussed in the Software Forum. If the reason you posted here was because you suspected malware (which is unlikely that it would attach just those two programs) then you would need to run our cleaning procedure which is given below.

Please read ALL of this message including the notes before doing anything.

Pleases follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide
and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:
If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC an... Read more

1 more replies
Relevance 70.11%

After few minutes of rendering I get a blue screen. Here are is what I get in my dmp file:

==================================================
Dump File : 082212-14757-01.dmp
Crash Time : 8/22/2012 12:14:22 PM
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`0808c028
Parameter 3 : 00000000`b0800000
Parameter 4 : 00000000`00040151
Caused By Driver : hal.dll
Caused By Address : hal.dll+12903
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+71f00
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\082212-14757-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7600
Dump File Size : 290,808
==================================================

I'm rendering with fx-8120 overclocked to 3.9Ghz.

Answer:BSOD rendering on vegas pro 11, error 0x00000124

Welcome
You have only given us one BSOD report, which is not enough for a definitive answer. Your report indicates Bugcode 124, hardware
Post number 2 will give you help in this area
http://www.sevenforums.com/crashes-d...aking-out.html

3 more replies
Relevance 69.29%

Hey i just installed Sony Vegas Movie Studio HD 10.0 and wanted to start it but when i start it up then it freezes at Initializing DirectX Plug Ins. I have searched on the internet, but i can't find a solution that works for me. I hope you guys can help me.
Greetz Kevin

Answer:Sony Vegas Movie Studio HD 10.0 Initializing DirectX Plug Ins Problem

try uninstalling third party software connected to the movie studio, then reinstall it. for example, New
blue

1 more replies
Relevance 69.29%

Are there any experts on Ulead Video Studio 7 out there, please.I am just starting to experiment in burning video to VCD captured via a leadtek TV card from a VHS player. However, whilst the captured clip initially plays back in Ulead VS 7 OK [i.e with picture/sound in sync] when the clip is rendered for burning to VCD - if it is then played back, even before burning to CD, the sound is about 10-15 seconds behind the picture!?? Can anyone offer any suggestions as to what might be causing this, please?

More replies
Relevance 69.29%

I have just bought a new pc from dell a installed with windows 7 on a 64 bit system.
whenever i try to render videos my video software crashes. its the same whether i click render in sony vegas or visonlab from fxhome.
I also get vertical white lines over videos in youtube.
videos play fine with media player or vlc.
I spent 1100 with dell and they havent replied to offer any support.

Fxhome have been great but cant find a solution and from checking the internet it all seems to be a permissions issue.

The thing is in the fxhome folder there are example projects and these projects render fine.

but all my other video clips dont

i cant install new project or render anything else


Yes i have the latest flash yes i have the latest quicktime and drivers for my graphics card. yes i have claimed ownership of the folders the files are in and i dont think u should have to attempt this for every file on a 1tb external hardrive.

so please can someone help. Ive read this forums and seen a lot of users seeking help get abuse.

Answer:brand new windows 7 pc crashes on rendering vegas or visionlab

Upload your dumps
http://www.sevenforums.com/crashes-d...tructions.html

3 more replies
Relevance 65.19%

when i render my video it renders as if the whole video is skewed, and nomatter what settings i change, it stays the same.

its as if the clipped image from the skewing is then transfered into the what should be black space on the other side of the screen.

Thanks in advance

More replies
Relevance 64.78%

how do you put the words that you want in the video while playing the video. example. in music videos they have the words at the bottom left of the artist and the song and some other info while the video is playing. how do you render that?
 

Answer:vegas problem:words on video

In those music videos they're probably using a fairly expensive peice of equipment called a Tricaster that overlays that text on the screen.

You can add your own text to video when you're making them. I have Studio and Premiere Elements so I don't know how you do it exactly in Vegas but in the two I have I just click on the add or insert text/title and put a simple line or two in where and for however long I want it to display. Then when I make the video or burn it to DVD its in the video.
 

1 more replies
Relevance 64.37%

I have a friend who has the following system specs and problems, so if you guys could help that would be great. He send me his specs and the following synopsis of the problem.

Alright here are the specs:
Motherboard - Gigabyte GA-K8NS Ultra-939
Ram - 1024 mb Geil DDR PC3200
Cpu - AMD Athlon 64 3500+ 939 socket
Video Card - Visiontek Xtasy 9600 256mb DDR

Heres the issue, I am running Adobe Premiere 6.5 on my computer, and I'm having trouble with the video rendering, but when I earlier had a ATI 9000 64 MB video card everything ran smoothly. I recently upgraded from an older computer, but I've put the older video card in the new system and everything runs fine. Everything on the newly built computer runs excellent, including Half Life 2 and so forth, all extensive processes. But whenever I play through a render video on Adobe Premiere it seems to jump and when the video hits an area that is not render it can lead to freezing. It has never frozen enough to disable my program. I'm using the Catalyst 4.11 drivers downloaded from the Visiontek website. Any attempt to downoad and install the Catalyst 5.4 drivers from ATi's website results in the computer crashing. What could be causing this probblem?

Answer:Help for a friend...video rendering problem

When you try to play a non-rendered portion of video obviously it's going to lag as its trying to play non-rendered data on the fly. If you're trying to load a ton more effects than you did before (because of your new system) that will make it crash too. For the life of me, i can't remember if adobe renders through gpu or cpu. Liquid 6 wont let you play (or cant rather, at least on my system) until it finishes rendering. You're going to want the newest drivers for your card, the catalyst 5.4 is what you really want. Does it crash on install or on download?

2 more replies
Relevance 63.96%

Hello,

I am trying to install Song Vegas 8 onto my Windows Vista via the installation disk.I have been having several small issues, first it takes forever to start installation and then when it does FINALLY begin installing I receive this message "Your system has not been modified. To install this program at a later time, please run the installation again" why does it do this? what does this mean? and what on earth do I do?

Also to try and combat this I have already e moved the start up file to the desktop and have been starting the installation manually. Also I deleted some files to ensure I had enough space.

what on earth should I do???? I have been trying for three weeks to get this to work, I know it's probably a simple fix but I have no idea what on earth to do!
 

Answer:Sony Vegas 8.0 - Installation Problem "Your System has not been Modified"

My advice would be to post your problem on the Sony forums http://www.sonycreativesoftware.com/forums/default.asp

They're a good community and very helpful.
 

3 more replies
Relevance 63.55%

Hi , I have recently installed Sony Vegas pro 8.0 and Moyea FLV to video converter.The problem is when I import the converted .avi files into Vegas I only get the audio and where the video thumb should be I have a window which read "media offline"
Can anyone please help with this problem ? Thanks in advance.
 

Answer:Sony Vegas "media offline" problem

Sound like the conversion may not have gone as anticipated.

Have you tried their forums?
 

2 more replies
Relevance 63.55%

Hi , I have recently installed Sony Vegas pro 8.0 and Moyea FLV to video converter.The problem is when I import the converted .avi files into Vegas I only get the audio and where the video thumb should be I have a window which read "media offline"
Can anyone please help with this problem ? Thanks in advance.
 

Answer:Sony vegas "media offline" problem

If you have no joy here try the own Vegas forum which is very helpful http://www.sonycreativesoftware.com/forums/showtopics.asp?forumid=12
 

2 more replies
Relevance 62.73%

*note to mods* if this is in the wrong place, I apologize -- please move it.

hey all. i am working on a project for a friend where I am taking a promotional DVD for his organization and making smaller (relatively) DivX-encoded files for his employees to store on PCs and take with them.

Basically, he wants his clients (and some staff members who do not have DVD drives) to be able to take the video with them and show on-site to folks.

I successfully ripped the DVD down to MPEG just fine. then, I DivX encoded it, leaving the final video size right at 1.5 GB. However, the target laptops (P3-700MHz, 256MB RAM, 8MB VRAM, Windows 2000 SP4) cannot play the videos. I can successfully play videos smaller (about 600MB) than 1GB on the laptops though. however, whenever I attempt to play the large file, Windows media player just simply crashes. I also tried Media Player Classic and it crashes too.

Interestingly, I copied the large file over to my personal desktop box (Athlon FX-55, 1.0GB RAM, 256MB VRAM, Windows 2000 SP4) and it plays just fine--quite beautifully, actually.

Could it be the amount of system RAM that is hurting the laptops? If so, how can I get around this?

I made sure I have the latest DivX codec and I also have the latest Windows Media Player and updates on the target laptop, but still no dice.

Any help would be greatly appreciated.
 

Answer:Problem rendering large (>1.0 GB) DivX Video Files

http://www.rojakpot.com/ > Windows Desktop Heap Tweak Guide!

Ever had problems opening or running applications even when your system has a LOT of free memory? Isn't it puzzling to get "Out Of Memory" errors when you evidently have a lot of free memory?? What you are actually facing is a lack of desktop heap! Today, we will show you just how to fix this annoying problem once and for all!Click to expand...

might be worth a go on one of those laptops as a test since its doesnt seem to be a hardware issue

The Symptoms

Before we proceed further, ask yourself if you have ever encountered any of the following problems :-

1. You try to open an application but it refuses to load or it starts to load and then it disappears!
2. You try to open or use an application but you get an "Out Of Memory" error message!
3. One of your running applications inexplicably quits!
4. When you right-click on your application, nothing happens! The command menu refuses to pop-up!
5. Your web browser simply refuses to load any more windows or tabs!
6. Your application is missing some menus or toolbars!
7. You get the following error messages :
Initialization of the dynamic library <system>\system32\user32.dll failed. The process is terminating abnormally.
Initialization of the dynamic library <system>\system32\kernel32.dll failed. The process is terminating abnormally.

A quick check of the Task Manager will usually show plenty of free memory,Click to expand... Read more

2 more replies
Relevance 62.32%

Okay I am taking a multimedia class and for extra credit my teacher gets us to use a support forum to get the answer to a specific question. The question this time is :

In Sony Vegas 5.0 What is a Crossfade? And is there a way/tool to create an automatic crossfade?

So if anyone could help it would be much apprieciated. i need the answer written in the forum. no links to other places otherwise i won't get the credit for doing this.

Thanks to all that help
 

Answer:Sony Vegas 5.0 Help

In the time line if you take two images/videos and overlap them you'll kinda see an "X" form and that will crossfade from one to the other.
 

4 more replies
Relevance 62.32%
Question: Sony Vegas 8 Help

I've been trying to open Sony Vegas 8, but for some reason, every time I open it, this message box pops up.I was hoping someone here will know what it means and how to fix it.

More replies
Relevance 62.32%
Question: Sony Vegas 5

I have installed Sony Vegas 5 and when I try to run this program it gives me An error occured. The system is low on memory.You may be able to reduce memory usage by closing other applications. My system is Win xp home,P4 2.8, 2gigs ram,and approx 40gigs free space on hard drive. I have tried shutting down all application but no luck. Any ideas will be appreciated. Thanks

Answer:Sony Vegas 5

Greetings $C13%...Welcome to TSF!

Could you please post back with more details of the 'program' that you are trying to run on your computer; particularly the actual 'error message'.

This information will assist us to help you resolve this issue.

Kind Regards,

3 more replies
Relevance 62.32%

I can't playback anything. When I try to press PLAY, this shows up:


 

More replies
Relevance 62.32%
Question: Sony Vegas help

If possible, what would be the quickest and easiest way to record multiple drum tracks simultaneously with sony vegas. What hardware would i need?
 

More replies
Relevance 62.32%
Question: Sony Vegas? help!!

Hi everyone thats reading this, i go to UVSC and I need a question answered. ok, In Sony Vegas, what does the "auto-ripple" effect do for a sound file? and How do you get it to work on you sound file?

can someone please help me with this?
 

Answer:Sony Vegas? help!!

http://forums.techguy.org/all-other-software/636197-sony-vegas-7-a.html
 

2 more replies
Relevance 62.32%

Hey Everyone and thank you very much for visiting my thread, hopefully you'll be able to solve my problem....

I Have an HP Pavillion Laptop with Windows Vista 32bit SP2 Home Premium
I've had it for two years now and it's wonderful.

Well except for two things....
1) I'm a film major and I use Windows version of Adobe Premier, which is Sony Vegas Pro 9. The program was working fine when I first got it, but recently it continuously becomes non-responsive. I make one or two moves, and the whole program just freezes...the "window message" pops up and I have to close down the program.
-Now I?ve tried programming my computer making SV (sony vegas) the highest priority when it's running, but so far it doesn't help.
- I also run Adobe After Effects on my computer and it works perfectly fine, but I only use that for motion graphics instead of the video editing

2) When ever I do run SV, my fan goes crazy and my computer heats up! I bought an external fan, but it does not seem to help. (And yes I know my CPU fan is working properly because you can practically hear it. And I clean it every month)

...and in all honesty, i really don't want to spend $$$ for a Mac.

----
Because I know you?re going to ask here are my computer specs:
OS Name: Microsoft? Windows Vista? Home Premium
Version: 6.0.6002 Service Pack 2 Build 6002
System Model: HP Pavilion dv6700 Notebook PC
System Type: X86-based PC
Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor ... Read more

Answer:Bad Sony Vegas, Bad.

Heyy!
Welcome to Vista Forums!

I use Sony Vegas Pro 9 too, and iv'e never experienced anything like that...

When does the problem happen, like when your rendering the movie?

I'm just thinking here, when the program freezes, leave it for a while, 10 minutes maybe, when you try to close or stop the program from doing anything, it "confuses" the computer even more.

Hope this helps you,
And please remember to post back with what you have tried,
Daniel =)

5 more replies
Relevance 62.32%
Question: Sony vegas?

When i open up sony vegas 7.0 i cant see the program. when i go to my task manager it says ots opned but i cant see it.

More replies
Relevance 62.32%

So I just downloaded Vegas 9.0b today and I get an error before the program can open saying that theres an internal error in the Common Language Runtime's Execution Engine and that the script host failed to initialize. How do I fix this?

Answer:Sony Vegas 9.0b Help

My first step would be to download it again, from a different place if possible, and try reinstalling it. Sounds like the download was corrupted.

2 more replies
Relevance 62.32%
Question: Sony Vegas 6

I torrented this program but when i install it most of it works but the media manager part doesnt. Then when i opened up the program and tried to insert video it wouldn't work. Was it because the media manager messed up? How do i fix it?

More replies
Relevance 62.32%
Question: Sony Vegas Help!

hey guys, i need some help in vegas pro 9. i recently downloaded two short clips off of youtube using "youtube downloader" and it saved them as two .mp4 files. i imported them into vegas in an attempt to merge the two clips together for viewing simplicity. upon exporting, i noticed that the video quality DRASTICALLY dropped when i used the same format (.mp4), however, when i tried using .wmv, the quality was equal to the original. can someone explain this to me? (im a complete noob at video)

*also, can someone recommend a format that will yield the BEST quality, at all costs
**is there a hierarchy of video formats? if so, can someone tell me?

thx guys.

Answer:Sony Vegas Help!

Hi,

I do not have that software, but it could be down to the export settings for that file type.

3 more replies
Relevance 62.32%

HEY! I have managed to download Sony Vegas pro 10.0 and seeing that I downloaded it, I do not have a serial number or any other information necessary to get the full version. Would anyone by chance have a serial number and any other info I could use?

Answer:Sony Vegas Pro 10.0

Hello,

We do not support cracked software here. Please see the Forum Rules.

This thread is now closed.

2 more replies
Relevance 62.32%
Question: Sony Vegas

Hi guys,
I have accidentally changed some settings in Vegas. For some reason when I add a video effect (ie brightness) to the clip, it will no longer show the effect of the video effect (on the timeline) until I render the clip. I've had all the settings go back to default layout but it still won't show up. Very frustrating. If anyone can help me out it would be greatly appreciated.
 

More replies