Computer Support Forum

gx280 fan makes load sound and appears error fan faliure error

Question: gx280 fan makes load sound and appears error fan faliure error

hi guys
when i strarts my computer its facs starts runs so fast and makes noices what could be the issue
but if i press f1 to continue it goes kingd of a normal sound but it then make loud again
please help ?
Alert! Previous fan failure. Strike F1 to continue or F2 to run setup utility.
tell me it the fan fan faulty or should i apply the heat compond to the heatsink ..!


Relevance 100%
Preferred Solution: gx280 fan makes load sound and appears error fan faliure error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: gx280 fan makes load sound and appears error fan faliure error

if it says "fan failure" then that is what needs replacing. Thermal paste will not fix a faulty fan!

1 more replies
Relevance 76.67%


This problem accrued couple of days ago all of a sudden, I was on facebook the site crashed and after that every time I try to load the page I get Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. I tried to clear cache and browsing data, SSL is on, Proxy is off, firewall is off and facebook is not on the list of restricted sites. All other pages are loading normally. Also strangely yesterday I noticed that my avira is gone, when I go to all programs-avira and try to start it shows that the folder is empty

Any idea about this problem?


More replies
Relevance 74.21%

PLease can someone help I believe this a virus. Computer prompts for Windows Xp Startup Password that I do not know.

It says: This computer is configured to require a password in order to start up. Please enter the startup Password below. Below the space to enter the password you can hit ok or restart.

After unsuccessful attempts because I do not know the password a system error comes on the screen.

lsass.exe- System Error Which says: When trying to update a password, this return indicates that the value provided as the current password is not correct.

This does not allow windows xp to open and the same startup password prompt box occurs in safemode. I have tried using the toshiba satellite l 25 s119 series recovery disk but to no avail, it not does work. Can anyone diagnose this for me? Thanks,


Answer:I cannot open windows, the recovery disk does not load, lsass.eve error appears.

Closing duplicate to:

1 more replies
Relevance 74.21%

hey i have this error message everytime i load up windows, i get this error message box appears which says frame work

an unhandled exception has occured in your application. if you click continue the appllication will ignore this error and attempt to continue. if you click quit the application will shut down

object reference not set to an instance of an object.

this error seems to be coming from an ipod file converter which i downloaded but i removed the program, but i still keep gettin this error appear everytime

can anyone help me with this please

Answer:error box appears called framework everytime i load windows up

Hello and Welcome to TSF

Sounds as if there is still something trying to run the ipod file converter software when you boot.
Look in the System Conifgurtion Utility Startup tab

1 more replies
Relevance 72.57%

i have dell inspiron 3558 when i charging my pc and watching videos on you tube my pc get a blue screen error  locale id 1033 bc code c2 and my pc restarts but when i charge my pc on another socket it works fine  when pc gets blue screen my pc makes sound for a while tell me why this happens PLESE!!!

More replies
Relevance 68.06%

I've tried changing the drive letter, but that doesn't help. The usb appears in the storage management window but states no media. Also, the computer recognizes the flash drive in printer and devices. But from that window all i can do it dismount the flash-drive.

The problem started Friday afternoon. That morning I loaded a document. When I went to print it at Office max that afternoon, the file wasn't in the folder and the other documents appeared to be in a unreadable programs. When the employee tried another computer, the same thing. When I got home, the thing won't even load.

Any help would be greatly appreciated

Answer:Laptop recognize USB (makes sound), but won't load!!! HELP!!

There's nothing you can do except buy another Usb stick.

1 more replies
Relevance 66.42%

Hi i am getting the Blue screen error of death while installing Windows in Dell optiplex GX280.................I dont know how to configure from SATA to IDE..Here is my BIOS screen

Answer:Blue screen error of death while installing Windows in Dell GX280

Follow these steps for Clean Reinstall Windows 7.

If they fail during install then work through these extra steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

Look through all of the settings choices in BIOS setup for SATA controller to set it at AHCI. But your board may not have it. Is there a newer BIOS update on the Dell Support Downloads webpage for your tag number?

1 more replies
Relevance 66.42%

I bought a computer identical to the DELL optiplex gx280 I own. I wanted to swap the hard drives but when I did and booted up the new (to me) computer, I got the message INTEL ACCELERATED SVGA BIOS .....DECOMPILATION OR DISASSEMBLY did I permanently wreck something?

Answer:Solved: dell optiplex gx280 windows xp boot error message

8 more replies
Relevance 66.42%

:cry anyone please help meeeeeee:cry

Answer:error in module rtl70.bpt error code 123 makes me cant use AV

well,im already read same thread including rtl70.bpt but its error code is 126

and im already do anything that thread need to do,but its not solve this problem

so,please,help meeeee

9 more replies
Relevance 66.42%

This message now appears on an otherwise excellent computer.

Cannot connect to wireless broadband (I'm doing this on my Equium P200D)

Any ideas. I've tried the Toshiba help to no avail.

Answer:Qosmio E10 CFSServ Listen Error & Recv InitConnect Error appears on startup


Someone wrote in this forum that the CFSServ is part of ConfigFree utility.
Remove ConfigFree application from the system and try to use and configure your WLan again or try to use the LAN connectivity!

Check it out

1 more replies
Relevance 64.78%

Hello, and thanks in advance for your time!Earlier this afternoon, I noticed that the sound on my Thinkpad W510 was no longer working. I hadn't really done anything of note with my computer- just updated Adobe Reader to v9.2, that I can think of. When I checked the notification area, I saw this:However, when I right click and click "Playback Devices", I get the following: I immediately checked Device Manager, and found that everything appeared to be fine:I tried uninstalled and reinstalling the Conexant and NVIDIA drivers, as well as updating BIOS. Nothing seems to help, When try to use the mute/volume buttons on the keyboard, the speaker mute button lights up when pressed, but the microphone mute and volume +/- buttons don't appear to do anything. I've also tried plugging in headphones, and that does not make any difference. When I boot from an Ubuntu CD, however, sound works fine, so I don't think that it's a hardware issue.Anything that you folks could do to point in the right direction would be greatly appreciated. Thanks!

More replies
Relevance 63.55%

I had a very bizarre problem today. I downloaded about 50 .mpg files and put them into a folder on my desktop. I opened one of them, and it worked fine, but after that every time I even opened the folder that the files were in, only half of the thumbnails would appear and then it would tell me that I had a Visual C++ Runtime Error, from explorer.exe aborting. At the same time as this, windows would pop up a little message saying that my virtual memory was low. Later, it popped up a message saying that my Media Player needed to be reinstalled and that my Norton Antivirus needed to be reinstalled. Then it disabled my Norton Firewall and my Norton Antivirus. Lastly, I started getting error messages telling me that my soundcard needed to be configured to handle voice files, by enabling hardware acceleration. The only problem with that was that Windows would not let me access the advanced sound settings!

I am running Windows XP (all patches up to date), 256 MB Ram, 75 Gig HD - so I figured the "low" virtual memory had to be an error. I tried tripling the virual memory to 1GB and also tried letting Windows automatically set the virtual memory size, but neither of these fixed the problem. My immediate thought was that it was a virus or trojan, but Norton VirusScan, Swat-It Trojan Scanner, and System Suite VirusScan all failed to detect anything, and all of them have their definitions up to date.

I ran a Google search to see what other things I should try and none of the... Read more

More replies
Relevance 62.73%


I have a Dell d410 laptop and now when I start the computer windows dos on load. It goes through bios and then a it hangs at the next screen with a flashing cursor.

I have powered off and on several times and nothing.

I've tried taking out the hard drive and putting in back in.

I also placed the computer and hard drive separately in the freezer

sometimes when I turn it on instead of the flashing cursor I get funny symbols...that look something like this:

picture of a heart, FA then a picture of a happy face and a few other letters, follow by the flashing cursor
any ideas/ help would be greatly appreciated.

ps. my luck the warranty ended 2 months ago

Answer:Boot Faliure - flashing cursor - windows xp wont load

Hi if you have a install disc you could try this

1 more replies
Relevance 62.32%

Recently my Hard Disc failed (30GB). It would rattle for a couple of minutes on boot up, then say: "Boot Faliure: System Halted"

I went out and got a new disc (120GB), I installed Win XP pro but I periodically got the same error. But this time it would say "Boot Faliure: System Halted" after only a few seconds, like it just couldn't see the disc at all. Where with the last disc it seemed to see it, but the disc was faulty.

I reinstalled windows a few times but still got the same error. Now my computer is working but only works if I go into the BIOS when I boot up. It seems to boot up if I select "save settings and exit". Also it seems to work if there is a CD in the drive. (It was not a bootable CD)

Do I need to update the BIOS? (That sounds scary.) Or is the the new disc just naff?

Would be glad of help



P3 1 GHz

Answer:Solved: Spasmodic error: "Boot Faliure: System Halted"

10 more replies
Relevance 59.86%

I get this error everytime I try to open this site.

"Message: Object required
Line: 1562
Char: 4
Code: 0

also get this:

Message: Unexpected call to method or property access.
Line: 264
Char: 5
Code: 0
URI: res://ieframe.dll/httpErrorPagesScripts.js

using I.E. 8 / Windows XP
all firewalls are down
no anti-virus software is running (including addons)
browser security is very minimal
addons are updated (or removed) latest version of java is installed
have latest version of flash and it is added onto I.E. browser
i meet all of the minimum requirements
What happens: I enter my email address into a form and click a button that should order this Starz thing I'm trying to get. When I click, it works and works and works until I finally get "page cannot load" error.

I have tried everything I've been able to troubleshoot with (via googling) and to no avail.

Also: I just got Qwest High Speed and MSN and Live (sort of a bundle) and my pc was updated -- I.E. to version 8 and whatever else Windows updated.

If you need more information, please let me know. (I also think I might be missing some libraries.

Thank you! :-D

Answer:Solved: Page load error every single time w/ error ...

7 more replies
Relevance 59.04%

I have Windows XP SP3. I have been infected with WINPC Defender. I went on line and checked out some sites they recomended Spy Blaster I installed this and the computer re-booted and now it gives and error message Booting GRLDR turning on gate A20 ..... Success and a black screen. XP Will not load

Answer:XP won't load error message Booting GRLDR error

Close this thread and mark it as resolved - then stick to your duplicate one.

1 more replies
Relevance 58.63%

MDT 6.3.8330.1000 , ADK 10, CM07 (work in progress to upgrade)

Hi All,

      i just caputure windows 7 x64 ent from MDT and trying to deploy with CM07, getting error  in setuperr.log"Error [DJOIN.EXE] Unattended Join: Failed to load all required input parameters, error occured processing [Username]: 0x57"
and " [DJOIN.EXE] Unattended Join: Unable to join; gdwError = 0x57". I am not using "Apply Network Settings" to join computer not unattend.xml file. After install driver, image stop at set up windows (looking for computername). I have
setup my osdcomputername in collection. 

   My production image works fine with osdcomputername. i just update this image with IE11 and rebuild the Unattend.xml file.

link is for my log files ...

thanks for help in advance.


More replies
Relevance 58.63%

Hi there, I have a refurbished Dell optiplex 280. It was working fine until a few weeks ago I loaded Avast Anti Virus. Then the whole system went craxy. I managed to reload windows but then the sound wouldnt work. I downloaded the sound drivers from the Dell website but still it doesnt work!! Before the system crash the sound and video worked perfectly. I have now upgraded to Windows 7 to try and get the sound to work, same thing. I keep getting the error message "no sound devices installed" I have speakers that are working perfectly! Please help

Answer:Dell Optiplex GX280 sound problems

There are no Windows 7 drivers.  However the Vista Driver works fine.

Use the windows vista driver.
Windows Vista
Analog Devices ADI 198x Integrated Audio  Release Date:     1/24/2007        Version:     A255.12.01.7010        Importance:     Recommended        Download Type:     Driver        File Format:     Hard-Drive        File Size:     3MB      R145551.EXE         32 BIT

R145149.EXE          64 BIT

SystemsDimension Desktop 2400Dimension Desktop 3000Dimension Desktop B110OptiPlex 170LOptiPlex GX270 / GX270NOptiPlex GX280OptiPlex GX520OptiPlex GX620OptiPlex SX270 / SX270NOptiPlex SX280Precision 360 / 360NPrecision 370Precision 450Precision 470Precision 650Precision 670   

4 more replies
Relevance 58.63%

Hello, various other people have posted this error (search function used), but noone has gotten an answer. Whenever i try to upgrade my sound driver to /,be it manually or via system update the sound driver gets messed up. To sound icon in the taskbar gets a red X, the sound card in device manager gets a "!", and says "Windows could not load driver". In other threads people suggested the driver is not signed so Vista64 refuses to load it, however under Driver details it says its signed by Microsoft...  I would appreciate if someone could tell me how they got this driver to work on their 64bit machine, i'd like to enjoy the fixes and benefits of the new version. Thanks.   

Thinkpad T400 (Windows 7 Ultimate x64)


Go to Solution.

Answer:T400 (sound/audio) Vista x64 Conexant II driver error "Could not load driver"

Hi there, I am having the exact same problem after updating the driver to Conexant Audio Software  / How did it resolved for you? Thanks, 

9 more replies
Relevance 56.58%

Does anyone know why a box randomly appears...(maybe system wanting to update or down load a patch). The box title is, Powered by support soft and says I am not logged on as an administrator please log off and back on as administrator(not word for word but close). In my user accounts file I am definitely an administrator...the only one. What could this be?

Answer:strange error box appears


This could be malware. If it appears again, capture it and reply posting the image. We need to know the EXACT words and spelling used.

3 more replies
Relevance 56.58%

I receive a box telling me "A runtime error has occured, do I wish to debug? Line 56. Error: Class not registered" When I click Yes it doesn't seem to do anything. Any ideas?Regards,Mike

Answer:Runtime Error Box Appears

click hereHow to disable script and runtime errors in Internet Explorer. Step-by-step guide.

1 more replies
Relevance 56.58%

Had this come up when trying to access a couple of my forum sites recently: IPS Driver Error There appears to be an error with the database. You can try to refresh the page by clicking here.-----Google seems to indicate it is a server overload.Is this correct or is it a PC problem?Refreshing as suggested doesn't solve it.First time in seven years of PCing.Just odd that it is happening on two different sites at any time of day.This is one site: click hereWhich I have just manage to access as far as the home page, but no further.Could someone test it for me.?Thanks.

Answer:IPS Driver Error There appears to be an er

a little sluggish here but otherwise no problems ie6 xp pro SP3johnny

2 more replies
Relevance 56.58%

Hi All,
I've been away for a while,and this morning when I clicked to Log On to the Forum I got the following error message (Screenshot)

I don't know where that came from!In any case,I can't make the correction,I can't see what missing Component needs to be re inserted!Any suggestions on how to fix this?Thanks.

Answer:Error Window appears !

I wouldn't install that.. It looks like spyware of some sort.
I recommend switching to Mozilla's Firefox

10 more replies
Relevance 56.58%

Since upgrading to this yesterday I keep getting the message:

Data execution Prevention: To help protect your computer windows has closed this program:

Name: Internet Explorer
Publisher: Microsoft

Then I get: Internet Explorer has encountered a problem and needs to close:

So I follow that through and double click again and then it's ok and doesn't close.

If I follow the advice of the first message and go to control panel then system and change the settings and restart the computer it always comes back!

Previously I was in IE 6 and was still having this trouble but it was only the second message (mentioned above) and usually only when opening Facebook.

It is driving me crazy, I can't think how to solve this. I has been told that upgrading to IE8 would solve any problems but clearly it's created more. Please can someone help me out, I'll appreciate it so much!

Answer:Error message, hope this makes sense....

read here

1 more replies
Relevance 56.58%

Think I have a virus, but all attempts to fix have failed. I have tried Norton, Adaware, UniblueSpyEraser, AVG...others. Error boxes pop up w/either nview or winlogon.exe error messages and when box is closed, pc shuts down and reboots. Here is the HJThis log:

Edit: removed inline hijackthis log

THANX for any help w/this!!

Answer:nview.exe virus/error makes pc reboot

Welcome to Majorgeeks!

As you likely already know is that malware is a massive pest these days and does its level best to hide itself in any number of places, So just a Hijackthis log will not show all the malware that can be on your PC, the full guide of our steps below has a few other logs that show alot of the malware on your PC and where they are located,

Please follow the instructions in the below link and attach the requested logs when you finish these instructions.

READ & RUN ME FIRST. Malware Removal Guide

plus a guide on how to attach the logs HOW TO: Attach Items To Your Post

1 more replies
Relevance 56.58%


I keep getting these awful error messages: "The instruction at referenced memory at...".

They vary; the current one says Microsoft Windows Search Protocol Host: wermgr.exe

Instruction at 0xfc5ed0e referenced memory at 0x00000000.

To spice things up, I get the occasional BSOD with the error message "IRQL equals or less."

I uninstalled ATI catalyst manager. I ran memtest and got a pass with no errors.

My system:

Windows 7 pro / 64bit. 12 GB ram, Intel I7 920.

Antivirus: Kaspersky, latest edition, trial version.

Any ideas?


Answer:Referenced memory error makes me miserable

ruzbayhhi said:

Any ideas?Click to expand...


How to find and post your Minidump Files:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor and don?t Zip each one individually.

3 more replies
Relevance 56.58%

Assume that you run an application that has a topmost window on a computer that is running Windows 7 or Windows Server 2008 R2. When you click the Show Desktop button two times, or when you press the Windows logo key+D two times, a non-topmost window appears above the topmost window. Additionally, the non-topmost window is formatted with the topmost property unexpectedly.
If you are facing this problem, apply this hotfix from KB2743148.

More replies
Relevance 56.17%

Our users have IE 7 and 8. We keep them locked into place by pointing IE to our firewall product (tools > internet options > connections > lan settings), so that only approved sites are the ones that our people can access.In the last few days, several of them report issues with specific websites loading very slowly - load times of over an hour just to get the log-in screen to appear.Troubleshooting Steps:1.) Unchecked the "use proxy server for your LAN" under the IE menus---> Site resolves instantly, as it should---> This pointed me to the direction that perhaps the site wasn't configured for our firewall2.) Re-checked the "use proxy server" box, and specifically configured the site in our firewall---> Site continues to resolve slowly, with the same load times as before performing step 1That would normally indicate that the problem is on the vendor's end. Something may be wrong with their site. And that's the line of thought I was pursuing until I was reported back to that the users are having the same problem on other websites. These new websites they're having problems with are, and have been for a long time, configured properly in the firewall.I'm not sure what my next step is to pursue. What am I looking for now? I don't know enough about networking to figure out where to track next.

Answer:Users are unable to load websites - no error, just 1-hour+ load times for pages


3 more replies
Relevance 56.17%


When I start the game "DiRT", press enter, the message like that, saying, that load profile is aborted, appears. Why? What I did wrong? Is this a bug in the game? I dont want to create a new profile. I wanna go on, but I can't because of this stupid issue.

Im running windows XP SP2. 2.33 GHz / 1,98 GB of RAM / NVIDIA GeForce 8800 GTS

I have a patch 1.2 installed to my DiRT.

Hope somebody will answer.


More replies
Relevance 56.17%

I have a NB100 And when it trys to boot i get Windows could not start because the following file is missing or corrupt: System32\Drivers\Ntfs.sys

I have connected a DVD drive with the product recovery disc GMR400882EN0 inside it and powered on, on booting i keep F12 pressed and I get the options for setting it to boot from HD FDD CD/DVD USB Memory, I set it to boot from CD/DVD

When it loads it gets to loading RAM image I get Error 32768 File PEBASE ISO Could Not Load.

I am suspecting faulty recovery disc? and a new one is £29.99? But the laptop is under warranty but they told me to do this.

My daughter has a Asus 904HD and once she had a problem... She had none of the poor support of go and do it yourself... Asus sent a courier very fast-confirmed pick by text-fixed-delivered back confirmed drop off by text within 5 days!!

Answer:NB100 Recovery Disc wont load - Error 32768 File PEBASE could not load

>I am suspecting faulty recovery disc? and a new one is £29.99? But the laptop is under warranty but they told me to do this.

I doubt it?s a faulty recovery disk.
The error message: missing or corrupt: System32\Drivers\Ntfs.sys could be caused by faulty HDD or another hardware component.
In your case I recommend contacting the Toshiba ASP for hardware check and new OS installation. The notebook is under warranty (as you suggested in the posting above) and therefore everything should be done for free because it?s covered by warranty


1 more replies
Relevance 56.17%

when i run live update, error 5 appears. what am i gonna do to fix live update?

Answer:when i run live update, error 5 appears.

Piece of advice.. Windows Vista is a mistake in itself, with that, it doesn't need any updates.. so automatic updates can literally be turned off. If you do need updates (which chances are you wont), you can download them directly off of Microsoft's website. The updates in Windows Vista (along with other OS's) will only make it worse. Just make sure your security is up to date and you'll be fine.

4 more replies
Relevance 56.17%

Hello Everyone    I cannot get rid of this Script Error Nag screen.
Please see attachment.
Note  I put a check mark in the box for Disable script debugging IE and also other.
I also Disabled notice of every script.
But I am still getting this nag screen can anyone tell me how to permanently disable it?  I have no quams about using the registry
to do this if necessary. Thanks

Answer:Script Error Disabled But Still Appears?

Exactly...where is the check box you used to attempt to disable script debugging?
There is a browser setting that dows that...what browser are you using?
Disable Script Debugging

1 more replies
Relevance 56.17%

I continously get the following error message while using IE-7:  "Do you want to allow software such as ActiveX controls and plug-ins to run?   Y or N"Is there a way to eliminate this message from continously poping up?

Answer:IE error message continously appears?

Yes, click Tools, Internet Options.Then click Advanced, then scroll down and check the two boxes next to "Allow active content to run...."Then click Ok and off you go!

4 more replies
Relevance 56.17%

So an annoying thing keeps happening. I will download videos (primarily .avi) from torrent sites, and when I open the folder that contains the files, an error message will come up. Downloading other types of files, such as .mp3s does not seem to produce the error.This only seems to happen when I download torrents of videos. There can be one .avi file in a folder, and after two seconds an error message will come up with three options, "OK", "Copy to Clipboard" and "Submit Report"... the text of the error msg is at the end of my post (it is long). The error messages are relentless, and will keep on popping up every second or so, after I click OK. Usually I just have to Ctrl-Alt-Del, and shutdown the not responding folder.I can view and move the contents of the folders if I use another program, such as GOM player. I will go into GOM player and click open file, and then I can browse the contents of the folders. There, I am even able to cut and paste them to new folders, and no error msgs will appear. Yet if I try to do this just using My Computer, the error msgs will appear.I really don't think that it's a virus, although I havent ruled out the possibility. I have AVG Antivirus/Antispyware, Sunbelt Firewall, AdAware, ASquared, Spybot, Spyware Blaster... None of the programs find anything.Any ideas? Thanks!ERROR MSG BELOW:OS: Windows XP Home Edition, SP2CPU: GenuineIntel, Intel Pentium 4, MMX @ 0 MHzApplication data:VmVyc2lvbjogV2xGQlhVSlF... Read more

Answer:Error Msg Appears Possibly Due To Downloading .avi's

Have you tried more than one torrent site?
Also, what torrent program do you have installed?

5 more replies
Relevance 56.17%

I'm trying for the last few days to downgrade vista to xp.
Whe I try to do a clean instal Ikeep getting error 0x0000007b (0xF7A8A524, 0xC0000034, 0x00000000, 0x00000000).

I have aslo tried going through dos (which i'm no good at) it keeps saying somthing about partion, which there isnt.
When i go through windows itself it says the version is newer than the one you are trying to install.

Answer:Error appears while downgrade Vista to XP


If you want to use the Win XP instead of Vista then you have to do a clean install!
The downgrade will not function because Vista is newer as XP.

I don?t know what notebook you have but most new notebooks support an SATA HDD controller and you need to include the SATA drivers in order to install Win XP.

Furthermore the SATA drivers are a part of Intel Storage Manger which should be released on the Toshiba page as well.

Just one hint; use the advanced search option of this Toshiba forum? there are a lot of threads regarding this theme!

1 more replies
Relevance 56.17%

Sometimes error messages pop up right when it shuts down, saying that a DLL file failed to initialize. I tried closing programs before shutting down, but it sometimes occurs too.

Here's a HijackThis! Log:

Logfile of HijackThis v1.99.1
Scan saved at 7:57:50 PM, on 8/29/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\vptray.exe
C:\Program Files\Common Files\AOL\1154294752\ee\AOLSoftware.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
D:\Advanced WindowsCare V2 Pro\Awc.exe
C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe
C:\Program Files\Common Files\hoty22011.exe
D:\DAEMON Tools\daemon.exe
C:\Program Files\Veoh Networks\Veoh\VeohClient.exe
C:\Program Files\WinZip\WZQKPICK.EXE
c:\program files\common files\aol\1154294752\ee\aim6.exe
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Network Monitor\netmon.exe
C:\Pr... Read more

More replies
Relevance 56.17%

Recently when I'm trying to connect to other PC on the same network, it gives me this ERROR 0x80070035. Previously I was able to connect to that computer, but sometimes I have had this error for a few days. After a while, without any changes been done, it disappeared and I was able to connect to it again. It happens quite frequently, but I need to do some work.... please if anyone can help me and suggest anything?!
there are 4 PC connected to the same network and other PC's doesn't have that problem. What can I do about it?

Thank you

Answer:Error 0x80070035 appears with no reason

Welcome to Seven Forums,

See this Thread for possible resolution, quite a long Thread but it might worth your time following all the recommendations.

I'd disable your AV or Security Program to start off and see if that's the culprit.

Please keep us posted.

1 more replies
Relevance 56.17%

Very recently, when I open up a folder, an error SOMETIMES appear with the following content:

OS: Windows XP Professional, SP2
CPU: GenuineIntel, Intel Pentium 4, MMX @ 0 MHz

Application data:
GVtMzJcV0lOSU5F... Read more

Answer:Error appears when I open a folder..

Check your Folder option is set to Explore.

To check it open My Computer, and select Tools, Folder Options, and File Types. Then select Folder and click the Advanced button.

2 more replies
Relevance 56.17%

I have the following error message coming up every time I reboot. I have tried to run CCleaner to get rid of it. I also did a System Restore back to a date prior to the time the file appeared. I think the error message started coming up after I downloaded, and deleted, several copies of the setup (.exe) file for VLC Media Player. I deleted several of these before I got a working copy of VLC.

The error message says:

Could not load or run C:\Users\Ella\AppData\Local\Temp\csrss.exe specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry.

I would like any advice as to how I can get rid it it.

Answer:Error message appears when I reboot.

Hi -

csrss.exe is located in \windows\system32

I suggest that you have your system reviewed by a Security Analyst.

Please follow these steps - NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

Regards. . .



1 more replies
Relevance 56.17%

I have a Tercra A2 and am now getting an IDE #0 Error on start up - what is the cause and is there anything to fix this problem?

Answer:Tecra A2: IDE #0 Error message appears

The IDE #0 error message refers mostly to the wrong or missing HDD connection.
Did you replace the HDD in the past or are you able to boot from HDD?

Possibly the HDD is dead and the BIOS cannot recognize the HDD.

4 more replies
Relevance 56.17%


I use recovery DVD-ROM. Its work fine but after the laptop restart it gives me error, it miss some file.
I try to repair that but still error.

What I can do?
If I sent it to workshop it would take from 7 day to 2 month. :(
Last time I send it take 2 month and had to fix screen when it come black and not work.

So please help me here and don?t send me to them.
dont send me to them.

Answer:Error appears after the usage of Recovery CD

Hmm?. Maybe you don?t need to contact the ASP.
But how should someone help you without any details about the notebook model and the error message? ?:|

Could you post more informations?

2 more replies
Relevance 56.17%

After our service upgrade we have not been able to install the newest version of Lync from the software section of MOP. Each time I attempt to install it gets to about 11% and fails with either the following messages that I am attaching the screenshot of. I am able to install correctly if I go on the Microsoft downloads site and download Lync basic 2013 from there.
I have tried repairing office\running the O15CTRRemove file\re-downloading the installer.
We ran into a problem

Sorry, we couldn’t install Office
We ran into a problem. Please try installing Office again

Answer:Could not install Office error appears

<< able to install correctly if I go on the Microsoft downloads site and download Lync basic 2013 from there.>>
I guess that I am not understanding your topic.  What is MOP and why are you downloading MS software from it?

1 more replies
Relevance 56.17%

this error appears to me when my windows starts

please someone tell me how to fix this error

Answer:please someone help (an error appears to me when my windows starts)

Registry values still being present after uninstalling (or deleting)TWEAKUI.CPL is one reason for why you'll receive that error, maroon1.

Read more about it here though ..

1 more replies
Relevance 56.17%

I am having problems with a Satellite Pro A120 laptop. When the laptop is switched on it is possible to open the CD/DVD drive, hence I know that the drive functions.

However, when the laptop is switched on, the computer shows the screen "In touch with tomorrow TOSHIBA" for a long while, and then the screen goes black and the message CD-ROM ERROR" appears. The D drive does not show on explorer.

I have found instructions to delete LowerFilters and UpperFilters from
HKEY_LOCAL_MACHINE/SYSTEM CurrentControlSet/Control/Class/4D36E965-E325-11CE-BFC1-08002BE10318.

by running &ldquo;regedit&rdquo;, but when rebooting the laptop the problem remains.

I have tried also tried to run the &ldquo;Product recovery&rdquo; CD from an external Drive, but the reboot ignores the CD, although, once the reboot is complete it can be seen that it that the external drive has been registered.

When the computer is logged off a message about &ldquo;memory that could not be read&rdquo; appears.

I would be most grateful for a prompt response.

Answer:Re: Satellite Pro A120 - CD-ROM error appears


To be honest if the CD-ROM error message appears before Windows starts it seems to be a hardware malfunction. So maybe the CD/DVD drive is not recognized properly and so the Toshiba screen appears for a long while.

Deleting the upper- and lowerfilters will not help you, this is software based only?

You should search for a new CD/DVD drive. Therefore you can ask an authorized service provider in your country. They can offer you a compatible drive. :)


13 more replies
Relevance 56.17%

I' ve been working with my Portege 2000 without problems, but 2 days ago, when I turn on screen show "ide #0 error", i've tested hd 1'8" with and adapter in a standard pc and it looks ok, all files and folders appears.

When i turn on the laptop hd'led lights but "ide #0 error" appears.

BIOS show no drive.


Answer:Portege 2000: IDE #0 error appears


My first idea was a HDD malfunction because the HDD is connected to the DIE#0 controller.
Mostly the message appears if the BIOS is not able to recognize the HDD!
Try to access the BIOS and check if the HDD is listed and was set to primary IDE.

If BIOS tells you about this problem this means that it?s not a software problem, but a hardware problem.
Try to format the HDD on other computer and check if it?s possible to use the HDD in the notebook again.

If it does not help I presume the HDD must be replaced :(

2 more replies
Relevance 56.17%


i been searching everywhere for an answer to my problem maybe u guys on here can help me. Im gettin an ide #0 error when i boot up my laptop, basically the original hdd became faulty, i had to keep reinstalling windows on it because all of a udden it would just not recognise my os,

anyway, i recently bought a brand new hdd and it was all working fine for about a week then all of a sudden i turn on the laptop and no hdd is detected at all all i get is "ide #0 error", i have checked in the bios and its not reading the hdd at all.

got no clue what this means or what to do about it can anybody out there help me or point me in the right direction?


After some exstensive reading on this forum i believe it may have somthing to do with the size and make of the hard drive, its a 120gb fujitsu CA0653-B042, i have a feeling that maybe its not compatable or even to big!!

so...My question is if its not compatable is it still possible for it to work in the first place as it did fine for about a week?

Message was edited by: Abracadabra

Answer:Satellite 2450-101 - ide #0 error appears


It?s very mysterious case? as you already said the IDE #0 error appears because the BIOS cannot recognize the HDD? that clear.
But usually the BIOS should not recognize the HDD from the first time because of the HDD size? this is strange why the HDD has worked for one week?

Anyway, in my opinion the 120GB seems to be to too large and therefore you should try another size? maybe 60GB?

PS: Did you try to switch the jumper on the HDD to another position???

5 more replies
Relevance 56.17%

All Of A Sudden a Warning Error Appears on my laptop with a red cross saying Wireless Configuration - Notification dll has not been registered, program will not work properly.Although everything seems to work ok. How do I get rid of this annoying message? Thanks.

Answer:Warning Error All Of A Sudden Appears

Will this work for you?click here

1 more replies
Relevance 56.17%

There is an error message which appears on startup. It reads "QC Verify, QC Test not run".
It has come up for a while and since it has appeared, the computer has been freezing. Only the mouse is able to move but you can't click anything. I have tried numerous companys but they don't have a clue. Please can you help me

Answer:error message appears on startup

I tried to look this up yesterday and couldn't find anything. Where exactly does it appear at startup? Please also post details about your system.

1 more replies
Relevance 56.17%

My computer is giving me a beep then shuts down the program that Im running with an error ,this is while Im trying to record a dvd  and run a game at the same time I thought computers these days can run multiple programs what's going on can any one help with this Im running with  a 975  bx  intel mb    8600 gt  256  video card  4 gig 1066 memory processor is intel 6400 2.1 duo 1066

Answer:computer makes 1 beep then program stops with error

What program is shutting down with an error?What error are you getting?version of Windows?Quote from: redbird on January 26, 2008, 08:39:48 AMI thought computers these days can run multiple programsThat depends on what programs you're trying to run at the same time. A new DX 10 capable game can easily use all the system resources on even the most powerful home computer.

4 more replies
Relevance 56.17%

First of all I'm not certainly sure if It's the right place to post this issue.

I have a static IP and a VPN connection. I want to reach every IP in the range 192.168.0.X via the VPN interface, and exit through my static IP when reaching any other destination.

I'm trying to route my ip tables but every configuration I try lets me without internet or exiting through the VPN to every destination.

This is a config I tried that returns general failure error while pinging my static DNS ( set in my public and static ip interface (

Is there something wrong in the config? (I know it lacks the proper routing for LAN VPN, I'm just trying to exit through my static IP while on VPN and it fails).

Thank you very much

EDIT: I Fixed it.
By not allowing the vpn to take the the default gateway, i get all traffic to the remote network over vpn, and the rest the usual route through my router.

On the vpn "nic", Network->ipv4->properties->advanced->ip-settings Remove check in "Use default gateway in remote network"
you may close this thread, thank you

More replies
Relevance 56.17%

I have a Toshiba Satellite A500 with fan noise problem.
It was partially solved upgrading BIOS from v1.20 to v1.30, according to this thread:
<a href="" target="_newWindow" class="jive-link-external"></a> <br />

Yesterday <strong>I upgraded BIOS to v1.50, and fan noise returned</strong>.
I don't recommend this upgrade if you have had fan noise problem.<br />

I have downgrade BIOS to v1.30 and fan noise problem is solved again.
I know people have problems to get BIOS downgrade, so I describe proccess in this thread:
<a href="" target="_newWindow" class="jive-link-external"></a>

Answer:Satellite A500: BIOS V1.50 upgrade makes fan noise problem appears again

Thanks mate for sharing this with us?

But maybe you could use the BIOS v1.5 and could reduce/decrease the cooling module activity in Vista/Win7 power management settings.
It would be worth to check this?

Anyway? thanks for this info?

2 more replies
Relevance 56.17%


This is not the first time this has happened. When I attempt to turn on my computer, the computer plays three beeps [one beep, then two in succession (beep... beep beep...) and the monitor receives no signal. Before, when this happened, I usually turned the power supply or unplugged the computer and turned it back on and it worked. However, this time, the computer keeps making the beeping noises and the monitor displays nothing. I know it is not a problem with connections or the monitor, but what is happening?

Thanks for your help

By the way, the computer reads from the floppy and appears to be running

Answer:Monitor receives no signal, Computer Makes three beeps, appears to be booting however

Need to identify your specific moterboard model or PC model numbers.....couldn't hazard a specific guess until then.

Those beeps can usually be identified as to the cause of your hardware malfunction. Make note of how many and in what sequence (i.e. one quick, two short.....three long repeating......etc.).

Edit: Duh, you did make note to find the manual.

3 more replies
Relevance 55.76%


When playing a PC game, I got an error which said "Fatal Error - Load error". I tried uninstalling and re-installing it, but the same thing happened.

I find it confusing because the game ran fine for a few days after I first installed it, then the above error occurred.

The game that I was playing was Flatout 2.



More replies
Relevance 55.76%

For some reason the past couple times I have re-started my computer, I have been getting 1 of 2 error's, they both have the same effect. If I have any programs running the outbound sounds work's on those programs, however once of the 2 error's occur any programs loaded after that will not do any outbound sound.

szAppName : svchost.exe szAppVer : 5.1.2600.5512
szModName : kernel32.dll szModVer : 5.1.2600.5781 offset : 00012afb


szAppName : svchost.exe szAppVer : 5.1.2600.5512 szModName : unknown
szModVer : offset : 001a6f64

Those are the error's that occur.
I have done virus scan's with mbam, avira, and IObit security 360, and they up clean.

More replies
Relevance 55.35%

I am trying to load NT on a computer. It worked fine. Added SP6 and rebooted fine. Added sound card driver, vid. drivers, and network card drivers. Rebooted and I get this error. It then goes and tries to boot from CDROM and then says press N to boot from network. It then says "Boot failure Insert boot disk in A: press any key when ready" Of course, I didn't make a repair disk either. I am on location and need a fix ASAP. Thanks!!!!!!!!!!!!!!!


Answer:{Resolved} - NT boot error - "Load Error! Press any key to reboot..." - help ASAP

Reformated, reinstalled.
Same error.

Please help ASAP.




2 more replies
Relevance 55.35%

failed to load library 'd3d9.dll

Answer:can not load skype with this error failed to load library 'd

failed to load library 'd3d9.dll

3 more replies
Relevance 55.35%

Started receiving this message a few months ago???? I read another similar thread that said to search hidden folders and files so here's my results:(mag_hook.dll ----- C:\WINDOWS\system32)(narrhook.dll ----- C:\WINDOWS\system32)(NeroSearchTrayHook.dll----C:\Program Files\Common Files\Ahead\Lib)(QOEHook.dll ---- C:\Program Files\eTrust Internet Security Suite\etrust Anti-Spam\QSP- ---- C:\Program Files\CA\SharedComponents\PPRT\bin)(mslhook.dll ---- C:\Program Files\Common Files\InstallShield\Ebgube\6\Intel 32) Any suggestions as to how to stop the error message? Thanks, Jill

More replies
Relevance 55.35%

I've tried scanning my friends computer with CCleaner and Spybot as well as anti-virus and nothing was solved.The computer prompts "Application Failed to Load" errors upon log in. Then a program called PhotoGallery tries to install automatically but fails repeatedly. There is no internet connection either. The wireless signal shows it is connected but it can not load any websites. Here is the HiJackThis log please be aware that I probably will not be able to get to the computer until at least Friday at the latest. So please list every step to follow in order so I can take proper and prompts action so I don't hold up anyones time.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:43:16 PM, on 8/4/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16674)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\WINDOW... Read more

Answer:Application Fails To Load Error/websites Don't Load

::Edit::Replied to the following topic about issue.

2 more replies
Relevance 55.35%

Hello,I have been having the same problem with my computer for a while. Whenever I attempt to play "Warcraft 3" or "C&C Generals" an error window appears although this does not happen with "Doom 3" which runs perfectly. The message that appears says: "Please ensure you have Directx 8.1 or newer installed, also check that your drivers are current & up to date" and sometimes it also says: "Make sure your graphics card meets the minimum requirements". OK, I had this problem when I was running my "Gainward 64mb Geforce 4 mx440" and rather than updating the drivers I bought the bad boy "Radeon 9800 256mb" as I thought that as it is a recent graphics card there would be no need for updating the drivers (for a while at least). Also I have always had Directx 8.1 or newer installed on my computer (I recently downloaded directx 9 I it didn't change a thing), and the funniest thing is when I bought "Warcraft 3" nearly a year ago it worked fine for the first 6 months (with my old graphics card). When it was all running fine and I was enjoying "Warcraft 3" I thought I'd buy "C&C generals", however this game worked fine for a few days and then started the hole error message problem I am having now. I have tried several times un-installing & re-installing the games aswell as "Directx" but this has not changed a thing. What I really don't understand is "Warcraft 3" was running perfectly for so long and even when I started to play "C&C generals" that worked fine to (all be it only for a coupl... Read more

Answer:I can't play C&C Generals, an error window appears

HAve you tried the directX diagnostics:startrundxdiag

6 more replies
Relevance 55.35%


I own a Qosmio G30-201 and have had it for almost 2 years now.
Only a few weeks back I've been getting a error message *error nv4.disp* and my system shuts down.
I've even used the recovery cd many times and it does work for a day or 2

Can any 1 help plz?

thank you

Answer:nv4.disp error appears and Qosmio G30-201 shuts down

Do you see corruption or lines on the screen? The graphics chip may have a problem.

I would send the unit to an ASP for repair.

2 more replies
Relevance 55.35%

Can anybody help me, i have the recovery discs for satellite series, when i use the first recovery disc it gets to 49% then an error msg appears "extraction error" has anybody see this before and if so is there a way out of it or can you get new disc from toshiba.

Answer:Extraction error appears when I install OS from Recovery CD

Hello Deano

I have seen some recovery errors on the beginning of the recovery procedure but not at the end of CD1. Can you please tell us which notebook model you have? Did you notice this issue before?

2 more replies
Relevance 55.35%

Alright so when i turn my computer, windows loads and my desktop background appears as does the mouse arrow but I get an error message that is titled:

Explorer.EXE-Application Error

and in the box, it says:

The application failed to initialize properly (0xc0000006). Click OK to terminate the application.

But, no matter if i click the ok button or the X to close it, the window will close and nothing will load. I am left with my desktop wallpaper and and mouse. The start bar will not appear though the CTRL ALT delete menu will open if i press those buttons. Also, when i start the computer in safe mode, the same message appears. I have a very elementary knowledge of computers but any help with getting rid of this message and getting my computer back to normal will be greatly appreciated.

Answer:0xc0000006- this error appears when i start windows

6 more replies
Relevance 55.35%

When I start my computer this message appears "Failed to initialize Main Window Error HRESULT E_fail has been returned from a call to a COM component".
 I just started and I have no idea what to do about it!

Also, my Microsoft office is not working (all started at the same time) and this message appears when I open MS Word, Excel, etc. and when I click OK,
it closes automatically " Microsoft Office Home and Student 2010 cannot verify the license for this product.  You should repair the Office program by using the Control Panel.  I have tried to repair it and have un-installed and re-installed
Any help is much appreciated!

Answer:Error message appears when I turn on my computer, help please!


I suggest you perform a startup repair to fix this start issue, please refer to this link
For the office issue, here are some workarounds, check if it can help you
And you can get more professional suggestions in this forum
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
does not control these sites and has not tested any software or information found on these sites.

TechNet Community Support

3 more replies
Relevance 55.35%

It says error message 2319 appears and windows live 2011 won't give me any messages. Please help me. I am unable to retrieve any of my new email messages in live2011 email account.

Answer:please help me. I have windows 7 and my windowslive2011 error message appears.

Originally Posted by Windows Central Question It says error message 2319 appears and windows live 2011 won't give me any messages. Please help me. I am unable to retrieve any of my new email messages in live2011 email account. is it 2319 r 3219?
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

1 more replies
Relevance 55.35%

tried using different browsers.
tried changing/using open dns servers.
tried ipconfig release and renew.
tried cleaning cookies, etc.

but still failed miserably.

it only happens on a single site.
but other computers can view the page.
corrupted dns?


More replies
Relevance 55.35%

I have a laptop that starts up ok only to be presented with the windows error message generic win 32 host prosess and an invitation to send a report to microsoft about it. if you click the debug option or cancel buttons the computer then stops responding to anything and you have to hit the power button to get it to switch off.The content of the error report refers to a couple of files in the temp section that have I think been cleared but from start up you cant do a safe mode start up and the error appears once windows is fully loaded on the desktop. I dont want to have to reload windows as if the drive is wiped OK that would cure it I cant find the machine drivers I would need its an acer aspire 3610 any ideas guys

Answer:win 32 generic host error appears in windows

Googled,Will give you something to look at untill someone can help. click here

2 more replies
Relevance 55.35%

Hello! Through the help of google and some specific key words, I was able to come across you guys.
I figured that some insight into this somewhat reoccurring issue would be a good idea at this point because I have no idea where to go.
 At first, I thought it was a game related issue because it only seemed to happen while playing RAGE. It then started happening even when I was just performing simple computer tasks. Basically what happens is that a "script error" with (red letters in a black box I believe) appears at the top of the monitor briefly, and then all of a sudden everything running begins to fail//crash. Audio becomes completely distorted, and just sounds like a bunch of scratchy-beeping. . very annoying. There will also be random graphic distortions with horizontal and vertical lines that replace what an image used to be. Attached are some examples of the video distortion ( please excuse the left side image on each)
It seems that the only way to make all of this to go away, is to simply restart the computer. I've updated every possible driver I can think of, and nothing has seemed to work yet.
System Info:
Windows 7 Home Premium 64 bit
AMD Phenom II X4 960T Processor 3.0 GHz
Corsair XMS DDR3 8GB    (x2)
Seagate Barracuda 2TB SATA Hard Drive
XFX Radeon HD 6870 1GB

Answer:Script Error Appears, and then Everything Begins to Crash

"Random graphic distortions with horizontal and vertical lines " Looks like a hardware issue or driver issue.
Just to rule out malware as cause:

 Install and run MBAM
Information about MBAM:
If this scan has been done, please post the the log into your next reply.

  Running TDSSKiller to obtain log
Note: Don't cure or delete a threat, but choose skip for all instead.
Please download TDSSKiller from here and save it to your Desktop
Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters

In the Additional options: Check Detect TDLFS file system
Click Start Scan and allow the scan process to run

Choose for all threats to Skip for all of them.
Click Continue
Please post the TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)
 ESET Online Scanner
Note: If your AV is blocking Eset online scanner, please temporarily disable your AV.
I'd like us to scan your machine with ESET OnlineScan This process may may take several hours, that is normal.
Hold down Control and click on this link to open ESET OnlineScan in a new window.
Click the  button.
For alternate browsers only:... Read more

4 more replies
Relevance 55.35%


i was just browsing the web as many of us do,anyways an error pops up saying acgshccg.exe has stopped working. im assuming this is an app due to the exe appearing.
but the file names really long,its called "YYggwBB udXFzgnnQszxf" heres the problem signature:

Problem signature:
Problem Event Name: APPCRASH
Application Name: acgshccg.exe
Application Version:
Application Timestamp: 4b55c976
Fault Module Name: StackHash_fd00
Fault Module Version:
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 92401cf8
OS Version: 6.0.6001.
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

now ive had to log on in safe mode,currently getting by,but the acg.exe file is on my computer just on my computer. its strange,i tried to do a system restore,but no luck as am not a domain user although i though i bought this laptop and it is my laptop... strange,trying to turn uac atm,is it worth doing the system restore point? or not?

am usually good with computes tbh,just afraid i may ruin this lol. so i turned to the forums.

hope some one can help


Answer:Blue screen of death appears out of nowhere due to app error please help

Hello iMosh,
Have you got this fixed yet ?.
If not, go to C > Windows > Minidump, zip up your files and upload them with your next post, you may need to copy them to your desktop first.

1 more replies
Relevance 55.35%


I was recently laying on my bed watching a DVD when I fell asleep with the laptop sat next me on my bed. During the night however I moved and accidently knocked it off the side of my bed.
The next day when I booted it up on loading it said IDE#1 Error which I have since come to understand is a CD/DVD drive error, The unit itself works fine, boots up ok (except the IDE error), and I can use it as normal except that there is no DVD drive in 'My computer' which is a bit of a pain when I want to watch a film/play a game or install something.

The drive itself is totally unresponsive, when I press the eject button the tray it doesn't do a thing.
I decided to try and remove and re-seat the drive to see if it was just knocked loose when it fell off the bed as it only fell a short way (about an 18" drop.)

I removed all the covers on the bottom of the laptop and checked that everything was seated correctly and to try and figure out how to remove the drive but didn't want to get too adventurous as to make the situation worse, the only thing i did do is remove the CPU fan and remove some fluff and remove the HDD and had a look to make sure it wasn't damaged in anywhere (it wasn't) and then replaced it and replaced all the covers.

When I rebooted the system it booted up fine as usual and the drive responds when I press the eject button, but the DVD drive is now (sometimes) displayed in 'My computer' but only when I insert something (be it a DVD/Game/Program) and... Read more

Answer:Satellite Pro A10: IDE#1 Error - drive appears only if CD is inserted

Hi Michael,

It is possible that reseating your optical drive may be necessary to return it to full functionality. Unfortunately on the A10 this will involve some dismantling in order to reach its securing screw which is underneath the keyboard.

Please check the following link for full dismantling instructions. The DVD drive is covered in step 13.


1 more replies
Relevance 55.35%

I got the following message a week ago, it said controller error found on hardisk1.
Any solution please ?

Your HDD has the SMART Predict Failure function which monitors the HDD operating status.
Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail.

Toshiba strongly recommends you create a back-up for your HDD data.
Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.

Answer:HDD failure error message appears on my Satellite C


I think the message says everything:
The HDD fitness has been checked and it look like some problems have been detected?

I would recommend to back-up the important data? in case the HDD would die, you could restore it again from another HDD, disk or flash memory?

1 more replies
Relevance 55.35%


BSOD appears when using Firefox after a few minutes. (When I use Google Chrome, no crash)
The morning before the first appearance, I installed, and used Deamon Tolls once, and I unstalled it.

I have done sfc /scannow - chkdsk at the start
The attempts "System Restore" before the date of installing "Daemon Tolls" didn't work (probleme of registry)

Thanks for your help

Answer:BSOD appears using Firefox, error 0x80070570

Hi TiglioNoce.

It appears that the BSOD is caused by fonts. Have you installed any font/program including fonts lately?

Browse to C:\Windows\Fonts, and delete the fonts those you have lately installed before the BSODs started to occur.

If you cannot access to the fonts folder in normal mode, try in safe mode.

Then rebuild the font cache. Go to C:\Windows\System32\ and delete the "Fntcache.dat" file there. Then restart the computer. On restart, a fresh font cache will be built.

Moreover, it appears that he G Data AntiVirus is also contributing to the BSODs.

fffff880`069dd9c8 fffff880`015ecc16Unable to load image \??\C:\Windows\system32\drivers\MiniIcpt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MiniIcpt.sys
*** ERROR: Module load completed but symbols could not be loaded for MiniIcpt.sys
Description here: Driver Reference Table - MiniIcpt.sys.

Uninstall G Data AntiVirus. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

3 more replies
Relevance 55.35%

Hi, I keep getting this message when I boot up RUN DLL Error loading fimp.elo, the specific module could not be found.

I have a Dell 4550, XP Home with SP3.

Back in October of 2009 I did have the Spytector by Andrei Radu Poleacu and was able to get rid of it.

Since this RUN DLL error, I have done several scans using TrendMicro, MSRT, SpyBot and there is no malware. I was told this could be either a malware problem or registry problem. By process of elimination, I guess it's a registry problem but I am unsure. At this point I need some guidance. Thanks

Answer:RUN DLL, error loading fimp.elo appears when booting up

Hello and Welcome.

This is indicative of an infection, which may or may not be completely neutralized. It appends the Winlogon Shell registry entry.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a

Having problems with spyware and pop-ups? First Steps

link at the top of each page.


Please follow our pre-posting process outlined here:

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Relevance 55.35%

Hello,I have been having the same problem with my computer for a while. Whenever I attempt to play "Warcraft 3" or "C&C Generals" an error window appears although this does not happen with "Doom 3" which runs perfectly. The message that appears says: "Please ensure you have Directx 8.1 or newer installed, also check that your drivers are current & up to date" and sometimes it also says: "Make sure your graphics card meets the minimum requirements". OK, I had this problem when I was running my "Gainward 64mb Geforce 4 mx440" and rather than updating the drivers I bought the bad boy "Radeon 9800 256mb" as I thought that as it is a recent graphics card there would be no need for updating the drivers (for a while at least). Also I have always had Directx 8.1 or newer installed on my computer (I recently downloaded directx 9 I it didn't change a thing), and the funniest thing is when I bought "Warcraft 3" nearly a year ago it worked fine for the first 6 months (with my old graphics card). When it was all running fine and I was enjoying "Warcraft 3" I thought I'd buy "C&C generals", however this game worked fine for a few days and then started the hole error message problem I am having now. I have tried several times un-installing & re-installing the games aswell as "Directx" but this has not changed a thing. What I really don't understand is "Warcraft 3" was running perfectly for so long and even when I started to play "C&C generals" that worked fine to (all be it only for a coupl... Read more

Answer:I can't play C&C Generals, an error window appears

Have you updated every driver, sound, motherboard etc?Sometimes these can cause problems.

2 more replies
Relevance 55.35%

i have tried to delete any file or folder and i get the error message " cannot delete : ***** access denied. make sure the disk is not write protected or full or the file is not currently in use." how to delete the files and folders ? can anyone suggest any solution?

Answer:trying to delete file and error message appears as below

It depends what files or folders exactly you are trying to delete, as Windows won't allow you to delete files that are vital to the operating system, or files that are already in use such as those which start automatically when Windows starts, or files which are open (eg a picture or a document).If they are definitely not protected operating system files or startup files, restart Windows and then try to delete them. If still no joy, try using File Assassin:

2 more replies
Relevance 55.35%

Hi,I was 'tidying up' my programs listings the oter night and used the add/remove programs function to delete some unnecessary software applications from my system.Now I always get a message box upon login stating that 'The feature you are trying to use is on a CD-ROm or other removable disk that is not available. Insert the 'Sonic Update Manager' disk and click Ok'How do I get around this error message - it won't go away and I've noticed that my PC is producing no sound at the minute.Thanks in advance for any advice forthcoming,FM.

Answer:Error - Sonic Update Manger appears to have gone

Anyone know what to do here??? :-/

10 more replies
Relevance 55.35%

ok i just installed a program and when i try to load it an error comes up saying that directx 9.0c adapters are not in my system or something like that and i tried installing directx 9.0c update and directx 9.0c fullpackage plus the program was supposed to install it when it installed

Answer:i need help running a program and error appears saying something about directx

Hello and welcome to Techspot.

Go HERE and read my post. A message for all newcomers.

What that error message is telling you, is your videocard isn`t up to the standard required.

Look at the programmes system requirements.

Regards Howard :wave: :wave:

1 more replies
Relevance 55.35%

After I sign in to open my computer, when I try to open Yahoo or Google a pop-up Error box opens stating " IM32 FAX. DIL not found", when I press okay, a 2nd. window opens up saying " Please wait while Windows Installer configures a spare back up", at this point another window opens up and says " The features you are trying to use is on a network resource unavailable, and then said, click okay to try again, or enter an altenate path to a folder containing the installation package Spare BackUp msi in the box below, then when that doesn't work and I close the bos out, another pop-up opens saying ERROR 1706, then says " No valid source could be found for product Spare Backup, Windows Installer cannot continue.

Make a long story short, Its tireing closing these pop-ups all day, I tried twice to restore my system, but the restore point only went back a week, honestly, I wish I could just restore my computer to the day that I
bought it, I have nothing for documents, is there are way to remove these pop-ups, or can I wipe out ever thing, then reload all the back up disk??
Thanks, John

Answer:Numerous Error Pop-Up Window Appears at Start Up

6 more replies
Relevance 55.35%

On my kid's pc - When opening internet explorer, or when opened and having entered an address, a dialog box appears stating "Cannot find '(website name)'. Make sure the path or internet address is correct". The only time it will work is when clicking on a link within the favorites menu. Have tried to use the Internet Explorer fix but this has not rectified the problem. Also, updated antivirus and ran check, which is ok. I'm hoping that someone can give me some other suggestions on how to fix this problem.

Answer:IE6 - Dialog box error appears cannot find sites

Same problem with my brothers pc also tried the reg.fix from kelly's korner but no joy.Anybody any ideas.

2 more replies
Relevance 55.35%

Well i have just tryied to install my paint shop pro program and i inserted it and i found to my surprise a blue error screen pop up and said 'An exception 0E has occurred at 0028:24000000 in VxD -- This was called from 0028:C1832738 in VxD Sc5i1hlp (03) + 00000508. It may be possible to continue normally' and when ever i try to install a program i cant install any disks/software so i was wondering if you can help

Answer:Software cant be installed, Error screen appears

What operating system and what is the specification of the machine.Try the system file checkerstartrun sfc

1 more replies
Relevance 55.35%

I have a box I have built up from scratch. Has two 2T SATA drives, one 750GB SATA drive, one 80GB IDE drive used to house XP Pro 32 bit.Win 7 Pro 64 is installed on one of the 2T drives and has been working fine til recently.Received NTLDR is missing press CTL+ALT+DEL to restart.Tried this, no luck.Entered disc repair from OEM XP disk and tried to install new NTLDR and NTDETECT from disc, now says NTLDR is Compressed press CTL+ALT+DRL to restart.Tried to use expand etc as read online, no luck.Got a clean drive, and installed same version of XP on this drive, using it as a slave in an XP based only box I had.Install went perfectly as expected, moved drive to primary box, drive is recognized but it too gives NTLDR is missing error.Removed drive from primary box and re-tried in second box, and it loads just fine.Issue seems to be something in the 7 Pro file but not sure.Will try to unhook 7 Pro drive from loop and see if XP will boot but have not done it yet...thoughtsÉÉ

Answer:Suddenly NTLDR is missing error appears

If you have a modern motherboard you can isolate each operating system as long as each is on a separate hard drive. The advantage of this is that you can add or remove hard drives at will without messing up the boot files. On the computer I am currently on the way to boot to any drive other than the default drive is to hit F11 at start up. You board should have something similar. If you disconnect all but the drive you are installing to you will not have boot files on one drive that serve to boot another drive.Another thing to note is that Windows 7 creates an extra partition that may be used for security of your system (see link below). If you don't need or want that feature then use a third party partitioning program instead of Windows 7.One other point is this. When you have more than one identical hard drive installed in the same system and they are being used independently (no RAID), then when you are setting up the hard drive you can assign a label to each drive. This is imperative if you want to use the method I suggested above. For example, WinXP, Windows 7 x64bit, programs, etc.If you don't do that, you will not know which drive to select from the menu. I have 5 hard drives and 2 optical drives installed. Each has a distinctive name.

4 more replies
Relevance 55.35%

kernal error 17f:0040ace occurs

Answer:miexplore.exe error appears when computer start up

run hardrive diagnostics

1 more replies
Relevance 55.35%

Hi all,

I have a Samsung R580 laptop and bad things appeared two days ago and continues until now.

The first thing happened is my computer freezes while I'm doing normal things with it. No way for Ctrl-Alt-Del, no way for soft reset. All I could do is Power off the computer, and then turn it on. After turning on, I saw that the system could not boot but stopping at POST screen. If I Ctrl-Alt-Del at that time, it can boot to Windows. If I let the system freezes again, the procedure returns. If I shut down Windows by myself, the next time I turn on the laptop is OK, no freezing at boot time but freezing in Windows will be a certain fact.

The symptom returns after some random time. Maybe 1 hour, maybe more or less.

Initially I thought it was the cooling system problem. I had the laptop to service, they clean it carefully and the heating problem could be bypassed.

Nevertheless, the problem still came after I brought the laptop home.

I wanna seek for minidump file. Things I did to have it are as follow

The OS did not ask me to restart but I did it to avoid any complicated things.

The crashes still occurred and after a long time waiting, I saw this BSOD screen

After a long time waiting (the record of waiting is the amount of 5 hours 30 mins), the collecting process is still 0%. No minidump file found.

I formatted the C: partition and reinstall Windows 8.1. Just Windows and Firefox, no more softwares. The BSOD problem still occur, but the error code changed to CRITICAL... Read more

Answer:Random error messages appears in BSODSs

Updated CrystalDiskInfo images. I have two hard drive, 1 SSD for Windows System and 1 HDD for data storage. Paging file let system managed and it use my 3 partitions from those 2 hard drives.

4 more replies
Relevance 55.35%

I am still occasionally getting the Windows 10 Critical error warning:START MENU AND CORTANA ARENT WORKING, WE'LL TRY TO FIX IT NEXT TIME YOU SIGN IN.
Is there now a patch to solve this, if not, any suggestions?

Answer:Windows 10 critical error warning still appears

There was an update within the last 2-3 weeks that updates the whole system to a new version. have you tried that.

5 more replies
Relevance 54.94%

How do I resolve the Socket Error # 11004 that appears every time I boot? It has a tile of Windows Update in the top of the error message. Is there something in the registry or internet connections I can fix?

Answer:Socket Error # 11004 appears every time I boot up

Hi 47DeerePuller and welcome to TSF !

When did the problem start ? Have you installed/uninstalled some program recently ?

Socket error (#11004): Valid name, no data of requested type

Go to the eventviewer : start => run => eventvwr.msc. Search the different sections there for that error (since it happens everytime you boot the computer you should be able to find it by looking at the date and time), double-click it and click on the third button on the right to copy the information then paste it here (right-click => paste). This will tell us which program is trying to access the internet.

That error can also happen if invalid DNS servers are used. If there's some mail client that checks your e-mails on startup then contact your internet or mail service provider or go on their website to know which servers you have to use and how to setup your mail client accordingly.

6 more replies
Relevance 54.94%

I have a Satellite Pro A40.
I have cleaned the cooling system (cooling pipe and fan), after I heard some strange noise from the cooling fan.
After having cleaned the system, the error message "you have cooling trouble shut down your computer and bring it to a service center" appears.
The fan is running on a low level, but do not accelerate as usual after opening several applications.
In that case the error message appears and the system gets extremly slow.

Thank you in advance for your advice


Answer:Satellite Pro A40: error message appears - cooling troubles

Hi there,

sounds something went wrong after the cleanup. I recommend you to send your machine immediately to an service partner and let them check your machine because the notebook could have some serious hardware malfunction.

Before sending your machine to them I would check the cable of the cooling fan and reattach it, maybe this could remove the error message.

If you need to find an ASP then click [HERE|] and find the nearest one in your country.

Greets and good luck :)

3 more replies
Relevance 54.94%

Just few minutes ago I uninstalled Revo uninstaller and after that my laptop is unusable
I got instant BSOD(see image)
I cant do anything now as it goes on rebooting after 5-10 seconds from boot
Quick help needed.

Answer:Epic BSOD error appears just after few seconds from boot

Hi ankush.

You need to supply some more information. Click on the button below:

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

If you cannot do it in normal mode for instant BSODs, boot the computer in Safe Mode and perform it.

We will start troubleshooting after we have the necessary data.

9 more replies
Relevance 54.94%

Hi Folks,

Bit of a problem here, I tried to install WXP whilst vista was on my Satellite A200-1AI and it would not let me. Regardless of how I set the bios, vista booted from the HDD and I could not boot from the WXP boot cd.


I formatted the HDD using another PC. Now when the HDD is in my notebook and I try to boot from the WXP cd I get the following msg:

"For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
PXE-E61: Media test failure, check cable
PXE-M0F: Existing PXE ROM.

BOOTMGR is missing
Press Ctrl+Alt+Del to restart"

Any ideas? Any suggestions would be really helpful.

Thanks for your time,


Answer:Satellite A200: PXE-E61 and BOOTMGR is missing error appears


You have formatted the HDD in another computer and the ?boot manager? was destroyed.
There is no operating system on the HDD and therefore the error message: ?BOOTMGR is missing Press Ctrl+Alt+Del to restart" appears

The second message ?PXE-M0F: Existing PXE ROM? says that the notebook tries to boot form the LAN but it?s not able to find an OS using the LAN connection!

Why all this error messages appears?!
Well, I think the CD/DVD drive cannot read the inserted WinXP CD and therefore in switches to LAN.

Note; You can boot from the drive by pressing the ?C? button immediately after notebook starting or you will press the F12 to get the booting menu. Then you could choose the ODD as booting source.

If you will be not able to boot from your WinXP CD I assume either the CD is faulty or the CD/DVD drive cannot handle this CD.

3 more replies
Relevance 54.94%

Hello everyone,

I've been using all Office 2010 features (Word, Excel etc.) absolutely fine for years on my computer that runs Windows 7 Home Premium 64 bit, but suddenly from yesterday I've been unable to open anything - not any document saved on my desktop or through any shortcuts or folders. I haven't installed any recent programs or made any changes to my computer (that I know of).

When I try to open something in Office 2010 a Windows Installer box appears saying 'preparing to install' and then 'configuring Microsoft Office Professional Plus 2010.' An error box then appears saying 'Fatal error during installation' and that's it.

I've checked my programs and I've got Office 2010 and Office Professional Plus 2010, but there's only the option to Change the Professional Plus version in the Uninstall or Change Program panel. However when I click Change on the Professional Plus version there's no option to repair it.

Should I try and uninstall Office 2010 and then reinstall it?

I'm sorry if this is a dumb question and if it's been answered elsewhere - I'm just worried that I won't ever be able to open my Word documents again!

Thank you very much for any help you can give me!

Answer:'Fatal Error During Installation' appears when I try to open Office 20

Hi Fishsticks13, welcome to Windows Seven Forums.

Do you have both Office 2010 & Office 2010 Pro Plus installed. If that is so why do you need 2 versions of Office.

Have a look at this website for a possible fix. It does recommend uninstalling & reinstalling Office.

Office Programs won&#39;t reload, "Fatal error during - Microsoft Community

3 more replies
Relevance 54.94%

I'm trying to upgrade from cyan to lumia denim on my lumia 630 dual sim. but every time i try to check for updates this error appears : we are currently unable to check for updates.(801901f8) or (801901f7). please help

Answer:How do I resolve 801901f8 error that appears when trying to check for update?

Since I wasn't able to search for the code online I'll ask a couple of questions and provide answers.
1 - Is your phone storage full? If so you need to make room
2 - Is your time and date correct? If not then fix that and it should work (you need to be within 5 minutes for time)
3 - Is your account properly synced? If not ensure that it is so that. Settings -> email + accounts -> long press -> sync
Are you using WiFi or data?
If none of these work then you need to see if you are able to download apps. If you can then that ensures all your settings are correct.
It could then just be a server error, which means waiting.

2 more replies
Relevance 54.94%

If i turn UEFi off and enable legacy, the system boots normally
i am now using mbr partition
UEFI doesent detect either my DVD drive, HDD, USB
Please help,
My Hard Disk is ok and good

Answer:3F0 Error Appears when UEFI is Enabled [Please Reply Urgen

Your other thread.
3F0 Error while enabling UEFi and Secure boot

2 more replies
Relevance 54.94%


On monday I bought Norton Internet Security 2007 and tried to install it. I was reading a word document while I was installing it. I received an error message and was asked to restart Windows XP.

When I tried to restart Windows XP. I received a message telling me there was an error that caused Windows to shut down. The message ask me to choose between: mode mode with command prompt

3.last know good configuration

4.start windows normally.

I choose "start windows normally"

MS Windows XP started normally for a few seconds then instead of my normally log on page I received a blue screen with this message:

"A problem has been detected and windows has been shut down to prevent damage to your computer.


if this is the first time you have seen this error screen, restart your computer. If this screen appears again follow these steps.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching and shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select start up options, and then select safe mode.

Technical information:

STOP: 0x00000ED (0x80E(1E30, 0xC000031, 0X000000000) "

And the then my computer shut down and then restart in the same sequence.

IT keep repeating the sequence: error message safe mode ect ect then blue screen, shut down and resta... Read more

Answer:Unmountable Boot Volume error message appears


I don?t know why but it seems that your master boot sector is damage?
You could try to access the repair console (boot from original windows CD and then press R)
Then try to use this command: chkdsk /p
This command should repair some sectors on the HDD. Maybe it helps.

If not then you should format the whole HDD and reinstall the OS again!

2 more replies