Computer Support Forum

250GB hard drive only shows 110GB

Question: 250GB hard drive only shows 110GB

I bought a Seagate hybrid hard drive listed at 250GB. when I look at the disk using Acronis disk Director it show the disk size as 110GB. I know the actual size is usually smaller than the listed size but more than 50% smaller? Seems bogus to me.

Relevance 100%
Preferred Solution: 250GB hard drive only shows 110GB

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: 250GB hard drive only shows 110GB

16 more replies
Relevance 92.66%

Hi all,

A friend of mine is having problems with a 250GB Seagate Hard drive.

It was bought from a computer shop and they fitted it for him. When he took it home the computer didnít recognise it. It then recognised it as 250gb, but his Windows OS wouldnít work properly (it would some times work and other times wouldnít).

He had the drive refreshed, re-formatted and had the partitions removed and rebuilt. Its then that 130GB disappeared.

Does anyone know what may have caused this (sorry I havenít given much info, but this is all I know) and if so, whether itís fixable. I have suggested that the drive be taken back to the shop that it was bought from, under warranty.

If you need any more info, please ask, and I will try and find out.

Any help would be appreciated.

Thanks in advance.

Answer:250GB Hard drive only shows 120GB.

7 more replies
Relevance 92.66%

I have recently fitted a Hitachi Deskstar 250gb Hard drive(model:HDS722525VLAT80) to my computer.

After Re-instaling windows (xp) the drive was showing as 125gb.

I have been told this is because windows xp will only support 125gb without service pack 2.

I have now downloaded SP2. but it still shows as 125gb.

Any ideas what I can do to fix this????????????

Answer:250gb Hard drive shows as 125gb

When you partitioned and formatted the drive, it didn't have any service packs, so it limited the format to what you see. If you go into Disk Management, you'll find that you now have about half the drive listed as "Unallocated". You can create a partition on this section and format it, then it will be available for use as a new drive letter.

1 more replies
Relevance 73.39%

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

Answer:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

2 more replies
Relevance 67.65%

Hi beautiful people,

Currently im using a 60gb partition for windows 7 32 bits ultimate in a SATA HD (AIHC mode), i've been told in the past that it is not recommended to use the entire HD as one partition cause slows the system (the needle works more), is that still true?

Answer:Windows 7 in a 250GB Hard Drive

To a certain extent yes, It is better to have one partition in the top of your drive to hold your system files (programs, drivers, etc) and another partition to hold your data. This will help your system run faster.

However, you cannot just rely on this alone. You should do regular disk cleanup using a program like CCleaner (don't use the registry cleaner option) and defragment your hard drive regularly as well.

9 more replies
Relevance 67.65%

Hello guys.. newbie here.. just want to seek help regarding HARD Drive replacement , for some reason my laptop wont boot upit only does lights (LED) but will not continue to boot or show the logo/ BIOS so we suspected probably HArdisk problem - in that sense we decided just to BUY a new hard drive and replace the existing 160GB with a 250GB.. Now im not sure if this is compatible enough with the MoBO..and the bios..MODEL : LENOVO 3000 G430 just bought it 4months ago here in Hong Kong.. Advice & tips is appreciated.

Answer:is it ok to put a 250GB Hard drive replacement?

You probably can't update the bios in the machine's current condition and if it's only 4 months old that's probaly unwarranted.Check the size to make sure it slot 1, 2 or 3 ( Different thickness) and bring the old HD with you to the store.Also check to see if the HD is IDE, SATA or PATA. It should say on the HD. If not then check out the spec sheets for your machine. Didn't save them? Try doing a search on here. Good luck with that though, I've seen rubber duckies drown with the level of support that Lenovo offers.Ensure that you have the recovery disks or make them any way you can.Good luck to ya bro.

1 more replies
Relevance 67.65%

I attempted to add a 250 GB hard drive to my PC, 3.0 Ghz, GA-8S648FX MB with 1 Gig DDR Ram. When I boot my PC and go into the bios, it sees the PC, however when the PC boots it doesn't show it in control panel or in "My Computer". I am running Windows XP Pro 2nd Edition and am frustrated. I have the most current bios for my motherboard and Gigabyte says it should be no problem on their end. So what am I doing wrong? I have tried both setting drives as Cable Select and also Master/Slave. I have tried setting it up with the original Windows XP Pro disk but it only sees 137MB. Any ideas? I got a real good deal so I bought 2 of these 250 GB drives for my PCs, too bad they can't see the. BTW, both PCs are the same motherboard only difference is that one of the PCs is a 2.8 Ghz CPU (INTEL). Thanks

Answer:PC won't format 250GB hard drive

Try going to the drive manufacturers website and download their tools and use this to format. There is an issue with drives above 137mb but I thought this was solved with XP.

4 more replies
Relevance 67.65%

If I attach my 250gb hard drive to a 6 yr old mobo, should it recogise it?I purely want to be able to run the maxtor powermax dos util software and won't be booting into windows at all.thanks.

Answer:250gb hard drive and 6yr old mobo

Only way to find out is try it.

6 more replies
Relevance 67.65%

Hi all, hopefully someone can help?Approx 2 years ago i bought a Medion portable hard drive from my local Aldi. Everything has been fine until today when the connection seems loose. If i connect the hard drive to the cable and plug it into my laptop the hard drive turns on, but the laptop doesn't recognise it, and says its malfunctioned.How do i go about fixing it if at all, and have i lost everything on my portable hard drive.Many thanks,Chris

Answer:Medion 250gb Hard Drive

You could probably disconnect the drive and use it in another external caddy.Before buying another caddy you need to know whether the drive is a SATA or PATA (IDE) probably a SATA if only two years old.

4 more replies
Relevance 67.65%

Hello, We have a customer who has an R40 that we replaced the drive with at their request for more drive space. The biggest drive we could go with was a 250GB drive. Since we installed the drive, the R40 has found it way back to the shop a couple times for a bad hard drive. We use only NEW drives. The drives have been WD 250 ide notebook drives. The original drive was a 40GB in size. In talking with a colleague form another shop, he suggested that the power supply and battery could play some role in this problem. The laptop battery does not hold a charge. The OS is XP Pro with SP2, the computer does see the entire 250GB when installed, this is seen in My Computer and in the BIOS. Can anyone give a suggestion as to what might be causing the larger drives to not last in the R40. The R40 isa Type 2723-LU2. I would appreciate any advice in troubleshooting this. It could be time for her to move to a new laptop. Thanks, Peter

Answer:R40 on it's third 250GB hard drive in four months

well i don't think the R40 has the shock protection system that came in the later T and R series. This means if the laptop experience constant shocks of some magnitude, this may cause faults to develop in the larger hdd, as the fault tolerance level of these new drives are slightly less than the smaller capacity drives. Usually bad sectors or other mechanical faults may develop, if the the drive head routinely crashes into the platter.   

3 more replies
Relevance 67.65%

I am new to this forum and have a question.

I have a new computer with Windows 7 home basic on it and all works well. Except the external harddrive of Iomega 250GB USB 2.0. The computer doesn?t see the drive. On this drive is are the backups of files that I want to install on this new computer.
How can I solve this problem? I googled for drivers but cannot find anything.

Answer:Iomega 250GB USB 2.0 Hard Drive

it shows nothing at all in computer? what if you unplug the usb then plug it back in again while windows is running? does anything happen?

and please fill in your system specs it may help if someone else sees this thread

5 more replies
Relevance 67.65%

i recently bought an internal seagate 250gb hard drive and when i installed it it is only finding 232gb i was wondering how i can access the other 18gbs if that is possible. i have seen the 137gb barrier but not something like this. all help would be appreciated.

Answer:250gb hard drive not full 250

its the way that windows reports space compared to the hdd manufactures. the hd manufactures report a meg as 1000 KB, while windows reports it as 1024 KB. no over a large amount of storage (say 80gb) the number will shrink, but the space is still there (will be reported as 74.5GB in windows). so what you have is normal.

2 more replies
Relevance 67.65%

how can i reduce it. I can not imagine why it takes so much space. does anyone have an idea?System: T400, Vista bussiness 32 


Go to Solution.

Answer:why the system takes so much space of the hard disk (about 110GB)?

Hi Halloechen_Wei, Probably Rescue and Recovery has made a bunch of backups that are taking up space. I don't remember exactly what the option is called, but if you start the Rescue and Recovery program, there is some way to "reclaim space" or something like that. Essentially you can delete some of the backups to reclaim some of the hard drive space. Good luck,Frank 

---------Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.Did someone help you?Say thanks! with a kudo.Even better: Pay it forward, help someone else.

1 more replies
Relevance 67.24%

Hi there, I've got a 250gb maxtor HD and it can't be detected in bios or something is wrong. WHENEVER its connected (either on its own or with another drive), it says "error loading OS".
(PC boots fine with my other Maxtor 120gb HD)

On some sites it says to set Bios HD Access to LARGE instead of auto/lba etc

BUT - my bios doesnt show me such a setting when i go into HD config screen. I know what screen it should be on, but believe me, there is no "large" option for HD access.

Motherboard = MSI MS-6567

Can someone pls help me?? Thanks so much


Answer:BIOS won't recognise 250gb Hard Drive

Well, error loading OS only shows that it can't load an OS. Do you have an OS on that drive?
At bootup, your BIOS should list the drives it detects. Do you see the Maxtor in the list (next to the optical drive)?

That's a rather old motherboard. It could be that it simply does not support hard drives larger than ~130GB. And I can't see a BIOS update that would fix it either.. You can try updating to the latest BIOS and hope that it fixes the problem of course.

4 more replies
Relevance 67.24%

I have been helping neighbour with their Lenovo-b50-80. It originally came with Windows 8.1 and I have upgraded it to Windows 10 and after a few hiccups is working perfectly.
The next stage of upgrading this laptop is to clone the 500GB original drive to a 250GB Samsung SSD using Aomei Backupper Standard 3.2 and Aomei Partition Assistant 6.0

When I go to Disk Management I find that the disk has 6 partitions. Most of which are probably linked to recovering the OS back to Win 8.1
I would like to get rid of all unessential disk space and so I thought I would ask for your suggestions.
At this moment all the files including Windows.old are located on the C: drive.
Many thanks,


Answer:Resizing Hard-drive To Clone To 250gb Ssd

So I found Towards the end of the page is this image;

Which is 2 partitions short of the Lenovo in #1. The 2 missing 1. Lenovo D: drive NTFS partition and 2. 1000MB partition.
Maybe I should keep them all...

13 more replies
Relevance 67.24%

Good Morning:I have Xp on one drive (120Gb) and Vista on another drive (200Gb) although I could move that one to another 120Gb drive.I also have a 250Gb Western Digital USB2 external drive which I would like to partition to make it a back-up for the two operating systems.Can anyone point me to an easy (and cheap) program to do that. And, will it be a problem to copy across since the 200Gb only contains about 110Gb currently?Thanks in advance!

Answer:Partitioning 250Gb external hard drive

click here|623991677&gclid=CP38iLSsh4cCFTeEEAodQ2pAZA

9 more replies
Relevance 67.24%

I think this must be fairly new but I cannot find any info or specification on HP website or with a search on Google. I particularly want to know if its file system is NTFS or FAT32 as my PC is Widows XP with NTFS. Maplin are the only people I have seen who have it on the shelf -not even Amazon have it as they still push the ?previous? 250GB model from HP.

Answer:HP ELEMENTS 250GB External Hard Drive

Cancel this thread as data now found.

1 more replies
Relevance 67.24%

I previously used windows xp and just went and bought a new hard drive and windows 10 usb. Im confused. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive

Answer:Clean install on a new 250gb hard drive/

no instructions came with the hard drive

2 more replies
Relevance 67.24%

Ok, I just built my own custom computer with a little from my friends. And we got it all running and working now, however Windows XP Pro is only detecting the 250GB as 130GB, and this is even when we "formated," and partitioned with Windows XP Pro.

Its not the Hard drive, because we built 2 of the exact same (1 for me and 1 for my bro) however its happening on both machines.

Any help, without wipping the currect data on them? (We've already transfered the data from our laptops to the new computers with our 5pc network)

Answer:250GB Hard Drive detected as 130GB?

What kind of hard drives are these? There might be a Bios limitation you need to overcome.

25 more replies
Relevance 67.24%

I previously used windows xp and just went and bought a new hard drive and windows 10 usb. Im confused. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive

Answer:Clean install on a new 250gb hard drive/

no instructions came with the hard drive

5 more replies
Relevance 67.24%

Hello, I've recently done a clean install of Windows 7 Ultimate and one of my harddrives is not showing up correctly. The harddrive itself is my Local Disk D, it hasn't got any system files on it however it is displaying at the wrong size:

The problem lies in the fact that on boot my Computer's BIOS detects the harddrive as a 233GB harddrive. This is not a problem as I understand that the harddrive itself isn't the exact size as what it says on the box, however the Windows 7 installation and Windows itself only detects the harddrive as being 148gb.

What I've Tried Doing:
I've tried different things to resolve this issue. I've looked at the Disk Management, but there are no extra partitions and I've also looked at the harddrive in Partition Manager which again only picked up 149gb and no unallocated space.
I've run a partition recovery tool in Partition Manager which did not detect any lost partitions containing the rest of the harddrive.
My System:


System Information
Time of this report: 10/18/2010, 18:30:10
Machine name: SAM-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 09/23/03 17:35:41 Ver: 08.00.09
Processor: AMD Opteron(tm) Processor 146, ~2.0GHz
Memory: 2046MB RAM
Available OS Memory: 2046MB RAM
Page File: 890MB used, 3202MB ... Read more

Answer:IDE Maxtor 250gb Hard drive Problem.

Hello samboyd93. Welcome to the forum.

The only thing I can think of is that the drive is set as a SATA2 drive on an older computer that only does SATA1 (please fill in your "My System Specs" to help avoid these kinds of guesses) although I doubt it.

If you look at the back of the HDD there are jumper pins. Setting a jumper sets the SATA speed on most drives. You may need to consult the HDD's documentation to see what the different jumper positions do. Every manufacturer has a different setup.

I would try setting the drive as SATA1 to test. But both drives should be at the same setting. Also try plugging the problem drive into a different port or using a different SATA cable. Can't hurt, might help.

You should also go into your BIOS and check the settings for that drive and compare them to the settings for the other drive. They should be the same.

Hope that helps.

9 more replies
Relevance 67.24%

Ok guys the story so far i have recieve my new 250GB hard drive my bios recognises it as a primary and a slaveall ok so far, XP doesnt recognise it in my computer settings but does if you go to control panel system then device manager any ideas below previous postingP.s. how do you turn below in to the words CLICK HEREclick here

Answer:Hard Drive + Cables 250Gb Continued

You need to go to right click on My Computer and choose 'Manage' then Disk management.You will see the drive in the list. Right click on the left hand box and choose 'initialize'. When this is done right click on the right hand side and choose 'New partition'. When you have done this right click again and choose 'Format'

10 more replies
Relevance 66.83%

My system drive is 120GB and Windows tells me I have 10GB left.

When I check the properties of each folder in the C:/ drive I only come up with 50GB.

What is this data ghost?

Answer:C:/ drive says 110GB used but I can only find 50GB.

Most is probly taken up by System restore and Shadow Copy data. Install TreeSize Free - Quickly Scan Directory Sizes and Find Space Hogs and see what it shows you is using the space.

3 more replies
Relevance 66.42%

Hello all. I'm hoping someone can help me. I have a 250gb maxtor hard drive. I have just purchased my second external case off of ebay and it does not work!!

The first one was no name brand, it says "Awesome" on the case and has lights that light up around the case. It said on the web it supports up to 250gb, and on the auction. When I plug it in, it recognizes it and I can view an play files off of it for maybe 5 minutes then it says "USB device not recognized" and gives errors like "this usb device can run faster on USB 2.0" which it is in a 2.0 port. Funny thing is right when I got it, it worked for a few hours, it kept working pretty well at first for maybe a week, then it just stops working after a few minutes.

So I purchased another one on ebay, another non name brand, it said it supports up to 250 gb, and this one it recognizes it for a few seconds and then it is suddently not on my computer at all. I have checked the device manager under both of these items and for drivers, etc. Everything seems to be working fine. I even downloaded a file that helps your computer recognize high disk space, although I was told on XP I don't have to do that. So what do you all think?? Is it just the cheap external case?? I have a Dell Inspirion 1100 with a celeron processor, purchased 1.5 years ago. I have tried the case on other computers that were better than mine, I have tried the hard drive straight into a computer and it works fine. I have the... Read more

Answer:Need help with getting 250gb hard drive in external case to work.

mmm... i had a problem like that with a flash drive. it worked for a couple of months, and then it just randomly disapperaed, and when i plug it in, it is not recognised anywhere atall on the system where it should be listed. i have never been able to solve that one.

2 more replies
Relevance 66.42%

Hi, Im new to the forums.

Im having problems with my external harddrive i backed up all my data so i could sort out my virus problem which i used the removal of viruses guide on this site. After, my computer was "cleaned" i plugged in my harddrive and and it was recongnized by Vista but when i try to move all my data back to where it belongs it wont move back. Could this be a virus problem or is my system in need off a proper virus "hunt" and a good virus "clean". i can access the files they just wont go on my computer



Could it be my hard drive infected with a virus is so tell me how to remove it

Answer:WD 250GB hard drive wont move my files

What happens when you try to transfer files? Do you get an error message? You'll need to be more specific than 'it doesn't work'

3 more replies
Relevance 66.42%

I'm trying to upgrade from the 30GB Toshiba harddrive that came with the unit to a Western Digital Scorpio Blue 250GB EIDE drive.
I take the swap the 30GB out for the 250GB put in a bootable version of XP SP3 CD-ROM and nothing - no sign that any power is getting to the drive.
The CDROM tries to write boot files to the hard drive but nothing happens.

Same thing happens when I try to use the 3cd pack from Toshiba or the recovery CD from Norton Ghost.
The computer is not seeing the drive. Put the old 30GB drive in and it boots up right away.

My BIOS settings show it to be set up for EIDE and to boot from the CDROM. What steps am I missing?

Answer:Satellite 2410 wont see new 250GB hard drive


It looks like the BIOS does not recognize the new HDD? I assume it?s too large?
The Satellite 2410 series is old and I assume it will not support bigger HDD?s than 120GB due to the 28bit LBA

So try with smaller HDD like 80GB or 100GB.


2 more replies
Relevance 66.42%

I recently upgrade my PC, and have installed a NEW 250 GB S-ATA Hard drive.
My bios has been upgraded, and when in the BIOS setup it recognizes the drive as what it should be, 250GB, When I was installing XP and creation a partition thru the intall progam it only let me setup a 131GB partition. I set up a 100GB partition and left the rest to play with afterwards. In the Computer management/disk manager in XP I have my 100GB partition and only 30GB of unallocated space to work with.

Does anyone know how I can resolve this problem?


Answer:250GB Hard drive, Windows only allows 131GB partitionable

Since this was a fresh install you need to add SP2. XP came out with a 137G limitation which was addressed with SP1. SP2 has replaced SP1.

If you only want a single 250G partition there are a couple of ways to address it.

1) Install SP2 and then run Partition Magic to resize the primary partition to pick up the extra 150G.

2) Slipstream SP2 into your copy of XP and then start over from scratch with a fresh install.

2 more replies
Relevance 66.42%

There is in regards to my SimpleTech portable hard drive and My new Dell Inspiron N7010 17R which has windows 7. It tells me that it can not recognize the device when I plug it into my USB port. It works great in my Dell Inspiron that has windows XP and my Lenovo at work that also runs windows XP. I have tried another laptop at my place of employment that has windows 7 on it and I get the same error message on that machine also. It has to be a conflict with the SimpleTech 250gb and Windows 7.
Your Help is very much appreciated!!

Answer:simpletech 250gb external hard drive & windows 7

Hi and welcome to TSF please try here to see if there is something at the support site for your drive to work with win 7

3 more replies
Relevance 66.42%

Ive been reading around and noticed that problems like this are fairly common. Im having troubles finding something that applies to me. I have a Dell Dimensin 8100 P4 1.4 GHZ, its sorta old i guess, it was a relatively new P4 computer i think. I just bought a Hitachi GSX 250GB ATA-100 IDE 8MB Buffer hard drive and havent been able to get it to be recognized at more than 127GB. I tried updating my BIOS (went from Revision A02 to AO9) but that didnt make any difference on the drive. DO i have to wipe the drive and start over with the blank drive or what? I also read that XP Home needs SP1 to recognized more than 127GB so i downloaded SP2 and it didnt make a difference. If anyone can clear up why this isnt working thatd be great.Thanks Alot

Answer:Solved: 250GB Hard Drive Only Showing as 127GB

12 more replies
Relevance 66.42%

Hi there,

My Sister owns a ASUS laptop running Windows Vista and has a portable hard drive (WD 250GB) which she uses to back up her files and to store her business files and personal files (music, photos, videos etc.) however, i plugged it into my MacBook to transfer files onto it. Now when i try to plug it back into her Asus, it doesn't recognise it and when "Computer" is opened the hard drive is displayed as "Local Disk (G". I am able to double click the text, but a window pops up saying "You need to format the disk in drive G: before you can use it." But i do not want to format the hard drive because the files on it aren't backed up. I've tried plugging it back into my MacBook, but that doesn't recognise it either.

Any help would be fantastic!


Answer:WD 250GB Portable Hard Drive requesting format

you may need to rename it as for example in her comp that may have been E drive and in mac F drive so drives have gotten mixed up
try vista disc management if you can see it there change drive letter, or try in safe mode, ie connect drive with comp off then re boot into safe mode

1 more replies
Relevance 66.42%

I'm not sure if the hard drive is failing, its an older IDE drive. I just formatted the drive and disk manager only shows it with 26.9GB and no other unallocated space. Is there any way to reclaim the lost space or is this a typical sign of a drive on its last legs?

Answer:250GB hard drive newly formatted only showing 26.9GB

Hi and welcome to SevenForums,
See what mini tool shows
Best Free Partition Manager for Windows | MiniTool Partition Free

3 more replies
Relevance 66.42%


I'd like to upgrade my current HD to the Seagate 250GB Internal Ultra ATA Hard Drive. My computer is 7 years old this June, so I'm curious about whether it's compatible or not. My current HD's specs are located here:

Specifically: Embedded Controller Interface: (40 pin) EIDE
Physical Dimensions (H x W x D): 1" x 5.78" x 4"

I have the most recent BIOS update for my computer which was released in 2002. I run XP SP2, PIII 735 MHz, 256 Megs RAM. Do you think this upgrade would work or would I just need to toss the idea and get a new computer?

Also, the HD's specs are located here:

Thanks so much,

Answer:Seagate 250GB Internal Ultra ATA Hard Drive

The 7200 hard drive wil give better data transfer, but on your system, p111, 735mhz, increasing your ram would help, I would say, more.
XP runs better with more memory.
Upgrading to a later cpu, and motherboard, would give your old pc, a new lease of life.

20 more replies
Relevance 66.42%

I'm not sure if the hard drive is failing, its an older IDE drive. I just formatted the drive and disk manager only shows it with 26.9GB and no other unallocated space. Is there any way to reclaim the lost space or is this a typical sign of a drive on its last legs?

Answer:250GB hard drive newly formatted only showing 26.9GB

Hi and welcome to SevenForums,
See what mini tool shows
Best Free Partition Manager for Windows | MiniTool Partition Free

1 more replies
Relevance 65.6%

This is not a repeat! It's just that I read somewhere about one needs to make sure that it is formatted to NTFS. My Windows XP Sp2 is formatted to NTFS so will this present no problem when I come to use the drive?

Answer:Maplins 250GB Western Digital External Hard Drive

No roblem.Used one for two years.

5 more replies
Relevance 65.6%

I'd like to get a 250GB SSD in my T450s when I order it, but Lenovo is charging $280 for the upgrade. So I'm thinking to order a T450s with a conventional 500GB spinning hard drive and buy a Crucial 256GB SSD elsewhere for $105. I would save $175 plus have a 500GB hard drive which I could erase and format and put into an external enclosure and use for other stuff. My question is -- I'm going to order the T450s with the Windows 7 Professional installation, so can I easily swap out the 500GB hard drive for the Crucial 256GB SSD (I'm ordering from elsewhere), and reinstall/recover Windows 7 Pro from recovery discs? I'm assuming that recovery discs are included or can be downloaded. Or, could I restore to the Crucial 256GB SSD from the recovery partition on the 500GB hard drive? How would I do this? 

Answer:Order T450s with 500GB hard drive, upgrade to 250GB SSD

Download and install Macrium Reflect.  There's a free version that makes clones.  Clone the factory drive to the SSD, then swap it out.  You don't get recovery disks.   The recovery software, though, has the option of creating a recovery disk set from the recovery partition that is installed on the drive.  So, you could burn the disks and put them away as your recovery solution.  When you clone the factory drive, you have the option of selecting which partions to include on the cloned drive.  If you've burned the disks first, you can simply not select the recovery partition (which is typically lettered "Q") and just clone the system reserved and Windows partitions and save yourself the disk space on the SSD. Once you've got it set up to your satisfaction, and you have the disks, then format the factory drive to use for your other purposes. 

9 more replies
Relevance 65.6%

I'm running Windows 7 Pro and the only option I see when I right click on the drives are NTFS or exFAT.

Hopefully it will be something easy because I'm not at all handy with the command prompt, unless someone walks me thru it.

Answer:Need to format a 160gb & 250gb external USB hard drive to FAT32?

have a read ta this,maybe helpful...**

2 more replies
Relevance 65.6%

Maplins list this as 'New'. Price is £69.99 inc vat ex store. Has anyone got/know of this drive and if so what are their opinions.

Answer:Maplins 250GB Western Digital External Hard Drive

Ordered one from Amazon £11 cheaper, delivery due tomorrow.

2 more replies
Relevance 64.78%

This hard drive originally was in my brother's computer. He had XP installed, went to install Windows 7 and after the first reboot, it would just hang on the bios screen.

I played with the jumper settings and such, nothin'. Put it in a few other computers, nothin'.

I was just curious, is it something that can be fixed or should I lay it on my desk to hold down some papers?

Answer:Seagate Barracuda 7200 250GB Hard Drive - Stopped working

8 more replies
Relevance 64.78%

I am trying to install an hitachi hard drive into dell 4600 my bios auto detects but when I go into my computer in windows xp the drive doesn't show up... Can any one help me???

Answer:Solved: Installing Hitchi 250gb hard drive in dell 4600

8 more replies
Relevance 64.37%

Hi I'm Mark. I'm having a problem when it comes with my notebook [dell inspiron 600m] and my external hard disk [WD Elements 250gb]. when I connected the 5 pin cable of the external hard disk to the usb port of the notebook, the connection is seem to unstable or on-and-off, therefore making file copying impossible. The external hard drive and the notebook is in good condition, although I can't really figure out what seems to be the problem. I am also having a theory that this might be a power supply problem. I would be very grateful to someone who can help me about this matter..

More replies
Relevance 64.37%

The Acer C: drive is now full and the Data D: drive is empty, but it is not recognizing it automatically. This computer is my brother's, he bought it new and has it at my house. It came formatted with no disc's and I'm not sure where his books for it are. Can anyone tell me how to activate the second hard drive so I can use itunes and download video, etc.

It would be very much appreciated. My brother uses the computer here but it has been here for at least 3 years maybe and the book is misplaced. He mostly uses it for youtube, facebook, and stuff like that and is less computer educated than I am at tech stuff, which isn't saying much.

Thanks in advance for any help.

Answer:Aspire AST690-UP925A 250GB SATA hard disk first drive full and won't go to 2nd

Boot into Bios, usually by hitting F8 as soon as the POST screen appears and see if the hard drives are both recognised. If the spare drive does not show in the Bios it either has a fault or it is not correctly connected.

What OS is on the PC.

7 more replies
Relevance 64.37%

Does anyone know how many milliamps this device draws?

The "Technical Specification" provides plenty of info but does not specify the actual current. All it says is that it is powered directly from the USB port. But I need to know exactly what the peak ma of this device is.



Answer:Western Digital My Passport Essential 250GB USB 2.0 Portable External Hard Drive

15 more replies
Relevance 63.96%

Bought a new Western Digital Sata HDD which I got today.
New in anti static bag and labelled WD2500AABS, says on it 250gb.
When I put it in my PC it shows as 40gb.
Thinking this may be an error I booted from Win XP CD to load OS and
it said 38.xx gb.
I have contacted the seller by Email but thought I may get faster and more reliable info from here.
I can of course return it but do not want to if it is me doing something wrong.

Answer:New 250gb Hdd Shows as 40gb

That model definitely shows as a 250GB see here
What version of XP? if you do not have SP3 you may not have support for large drives.
In Windows, click on Start->Run, enter "regedit".
Navigate to the HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\atapi\Parameters registry subkey.
From the Edit menu, select New, DWORD Value.
Enter the name EnableBigLba, then press Enter.
Double-click the new value, set it to 1, then click OK.
Close the registry editor.
Restart the machine for the change to take effect.

10 more replies
Relevance 62.32%

Been given the ladptop to clean out as it's passing from teenager to mum. Ran all the usual. When I looked at My Computer, saw that the C drive plus the D recovery totalled in the order of 40Gb. The HDD is a 250 Gb one. Any thoughts, please?

Answer:HP Compaq Laptop - 250Gb HDD shows as 40Gb

Try windirstat
It will show what is on the drive. Be careful if you use the program to delete anything as it will also delete Windows files!

10 more replies
Relevance 62.32%

Im wondering why i can only access 1/2 of my drive where has the remainder 125gb gone.



P4 Core 2 E6300
1gb Ram (generic)
GA-965P S3 Award bios
Win XP Pro sp2
Radeon x550

Answer:Solved: 250gb Sata HDD shows as 125gb

10 more replies
Relevance 60.27%

Ok so on my western digital terabyte external HDD it shows I only have 80gb free, all I have on it is about 250gb worth of movies/music. Could this be because I have my windows image backup on it? MY computer backs up to my external every once in a while, but that folder shows 0mb of usage. Thanks for the help in advance!

Answer:Terabyte External HDD shows only 80gb free, only 250gb worth of stuff on it.. help?

hidden files?

are you checking it through windows explorer or disk management?

5 more replies
Relevance 60.27%

My toshiba extrnl 1tb hard disk changed to raw aftr abrupt power cut whn drive was cnnectd to pc. After sum research tried method of test disk on win 7. I followd the procedure and writed partion. But aftr rebootng nw disk changed to unallocated. I tried initializing disk to mbr but it shows cyclic redundancy chck error. And also whn i run test disk nw. It show partion read error. I backdup my data frm drive nw. But also dnt want to lose my drive.
I treid all, chkdsk also but drive dosnt have drive path lettr so i cant run chksdk mthd also. I also use 3rd party app to rebuild mbr bt it aso faild.
Plz can u suggest, wat can i do to save my drive.

My above prblm can be bettr undrstand by you in followng link video.

Awitng ur rply

Answer:1tb hard drive shows unallocated & shows error cyclic redundancy error

Hello and welcome Kishor now I have gut feeling that drive night have been damaged by the sudden power failure it could have affected the platters themselves or the controller unit.
Now I think you need to test the drive using this SeaTools for Windows | Seagate or a purely physical surface test see this Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition. run it and see my pic on how to set that up. It tests the actual surface of the platters and to some extent the ability of the read / write heads.

2 more replies
Relevance 59.86%

Hi, I have a Lenovo T430s. The laptop has two hard drives, a 256gb SSD and a 500gb HDD. Both show in Device Manager but only the SSD shows up in exploer. 500gb HDD: HGST HTS725050A7E630256GB SSD: LITEONIT LMT-256M6M mSATA 256GB I updated the drivers and they said they are updated. Troubleshooting that I haven't tried is going into BIOS.  I'm not sure, or don't know how to get into BIOS, and when I do, I do not know what to try once I get in. I'm not sure why both hard drives are not showing up in explorer on it's own. Details of my computer:  


Go to Solution.

Answer:Detect both hard drives in device manager but only one hard drive shows in explorer

Good day and welcome to the community.
Have you created a partition on the 500gb drive?

2 more replies
Relevance 58.63%

With my 2009 Seagate 500 GB sata hard drive, the re-allocated sectors count shows 2 bad sectors, in the Ubuntu 10.04 disk utility for the smart data. In this multi-boot desktop PC the XP with a drive monitor program called, Active Smart shows this drive health status as good, including that reallocated sectors count item, so is this not to worry about for now, or what. I do monitor the hard drive temperature, which does stay cool enough, in the seventies up to about 80* F.
Or can this be caused by mixed partitioning methods, since the new way is now align to MiB, and not align to cylinder as it was. I used the GParted tool to create and change partitions when it was set as default to align to cylinder, but then I recently used both my Vista Disk Manager, and the newer version of GParted to re-size some of the partitions, which both now use that align to MiB method by default, which often has near 1 MB gaps between partitions then.

More replies
Relevance 58.63%

I am trying to access files on a hard drive from a different computer which will no longer load the OS. I have connected the hard drive using a usb adapter. When I plug it in, I get a notice that the device is ready to use, but it does not show up in Computer.

It is visible in the disk manager. There is no drive letter assigned and the options to do so are grayed out. Most of the options in device manager are grayed out, except for 'delete volume' and 'help'.

Answer:hard drive w/ usb adapter- drive shows in disk manager, not computer

Welcome to the forum,

Can you post a maximized screenshot of your full disk management window.

Screenshots and Files - Upload and Post in Seven Forums

4 more replies
Relevance 58.63%

I have a backup drive that we had used for for a while (WD 6000aak), previously in an external drive enclosure. I connected it today via USB to find that the computer has the driver installed, the drive appears in the Devices list, but it does not show in My Computer. In "Disk Management" the drive appears but is not assigned a drive letter. Also, all the options for the volumes are greyed out and cannot be selected - thus I cannot assign a drive letter.

I have tried this on multiple computers. I have also removed it from the enclosure and connected the drive via SATA... the result is identical. I checked the bios and the drive appears there.

The drive does spin when powering up. It is hot (even though it cannot really be accessed).

Any suggestions? Is this drive done?

Answer:Hard drive installed, shows in Drive Mngmnt, in Bios, but not in Comp.

Go to Disk Management, in the bottom part of the screen, right click the drive, select 'change drive letter or path', next window select add, next window select a drive letter from the drop down box. For an external drive it's best to use a letter lower in the alphabet. If disk management wants to initialize and format it, don't do it if there is data on it you don't want to lose. If no data or if you don't care, go ahead. It will show in computer when a drive letter is assigned.

9 more replies
Relevance 58.22%

My computer failed to boot a few weeks ago. I took out the C drive and put it in an external drive case on my other computer in order to retrieve outlook emails, bookmarks, etc. The drive is 250 gigs. It only shows an 'N' drive, 130 gigs worth of data, which must have been a partition. The C drive isn't there. Is it corrupted? Will be I be able to retrieve anything from the C drive?  If the drive is corrupted, why does one partition show up and not the other?

Answer:Hard drive doesn't show C drive, but shows the other partition

I had a similar situation. I was able to get data off the drive using a Ubuntu live cd. Burn the iso to cd, put the drive back in the computer and boot to the cd. If you can see the drive in Places then you should be able to get your data off. Please note the "if" and "should".Good luck.

5 more replies
Relevance 57.81%

I installed a new 500gb hard drive in my acer laptop.  Ran the system disc.  But it won't show my 4gb of ram or my 500gb hard drive.  Shows my old config.  What's up with that?

Answer:Installed new hard drive. Still shows old hard drive.

No idea what you are talking about. You need to explain IN DETAIL. What shows your old config? What does ram have to do with the hd? What are you talking about?

1 more replies
Relevance 57.81%

hi! im newbie here! i bought a new acer laptop and the laptop has preinstalled OS which is... i install windows xp Sp2 . . a prompt appear says there's a 2 partition . . the other one is fat 32 i think den the other one is named unknown . . i delete the partition named unknown and convert it to ntfs after that the windows xp successfully installed den when i check the capacity of my hard disk it shows only 35 GB while the true capacity of my hard disk is 80gb . . my problem now is where the other 45 GB now . . can i resize the the 35 gb to 80 gb? thanks

Edit: Please us proper thread titles from now on. Thanks.

Answer:Hard drive shows 35gig, even though it`s an 80gig drive?

That other "unknown" partition would most likely be your ACER Recovery Partition where you can reinstall your OS in the event of a windows OS being corrupted..

9 more replies
Relevance 57.81%

I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?

I'm also seeing some other odd behavior on this computer, and since it may be related I'll mention it. When I first opened my Computer, it showed the same networked drive repeatedly, with every letter from F thru Z. I deleted them all except one, but now every time I reboot, I get a logon connect dialog that asks to reconnect one of them. So with each reboot it is adding back one of the duplicate mapped networked drives that I had deleted. I expect it will eventually end up with all the alphabet letters like it was when I first sat down at this computer.

My main concern is to get the external hard drive to appear where it belongs.

Answer:External hard drive shows up as a network drive

10 more replies
Relevance 57.4%

I bought an internal SATA drive to connect external to clone my new computer. After cloning the the new computer to this drive it only shows 225GB total space on the drive. Is there anyway to correct this where I see 1TB on the drive

Answer:1TB hard drive shows only 225 GB

Hi was the drive you cloned 225gb? . If so you seem to have made a direct copy of the drive so the new size of the 1tb is 225gb.You will need to delete the 225gb partition and re make a new partition of 1tb and format it you can use Disk Mangement to do this. To use the whole 1tb it would be better to use backup software like "todo backup"

2 more replies
Relevance 57.4%

Ive bought a 20 gig IBM Travelstar hard drive on Ebay.. the label says 20 gig .. but it only shows 10.7 gig in My Computer.. I have tried scandisk (all ok ) and a defrag... also ok tho'there were a number of files which couldnt be defragged...I dont suspect sumdy's changed the label.. but who knows .... any thoughts on why this should be??... could there be an operating system lurking on the other part of the drive???

Answer:20 gig hard drive only shows 10.7 gig

Is it partitioned? Maybe have linux on the other partition?

9 more replies
Relevance 57.4%

I haave 250 GB Toshiba Sata hardrive. I formatted many times. now It shows only 232 GB How can I recover all teh space again to use?

Answer:250 GB hard drive shows only 232 GB

this will explain everything

11 more replies
Relevance 57.4%

I bought an internal SATA drive to connect external to clone my new computer. After cloning the the new computer to this drive it only shows 225GB total space on the drive. Is there anyway to correct this where I see 1TB on the drive

Answer:1TB hard drive shows only 225 GB

Hi was the drive you cloned 225gb? . If so you seem to have made a direct copy of the drive so the new size of the 1tb is 225gb.You will need to delete the 225gb partition and re make a new partition of 1tb and format it you can use Disk Mangement to do this. To use the whole 1tb it would be better to use backup software like "todo backup"

7 more replies
Relevance 56.58%

My hard drive (500gb) shows that it's FULL from My Computer window.

But after running some tests, i KNOW that it has 322GB of free space!

Why is it showing full! This is stopping my other programs from running properly b/c they think my hard drive is full


Answer:Hard Drive shows full (but it's not!)

turning off system restore solved this...

1 more replies
Relevance 56.58%

I purchased a 160mb HDD and formatted it through Fdisk. I am running XP Professional and Windows 98 dual boot. Even when in XP my system still only see the drive as about 32mb.Any ideaas?

Answer:Hard drive shows much smaller than actually is

What did Fdisk report about the size of your harddrive after you had formatted it?Cheers de Art

8 more replies
Relevance 56.58%

HiI have a 40Gb hard drive, it has 15gb of programmes, files etc on it so it should show 25Gb fee, but it only shows ~14Gb free. How can I find out whats in the extra disc space if anything (its not hidden files, had a look at those).Or how can I recover the space so it shows correct free space.40gb hard drive, running winXp home.Cheers

Answer:hard drive shows 14G available but should show 25

Search the forum  or google  for it...There's reasonable answer

4 more replies
Relevance 56.58%

My friend is having a problem with her new laptop that I can seem to figure out. She was complaining that her new HP g60-519wm laptop had a full hard drive already. I knew this couldn't possibly be true because it has something like a 240GB hard drive and she had barely used it. She brought it over and sure enough it showed only 7gb free on the main partition. I started looking thru it checking the size of each individual folder to try and pinpoint what was taking up the space until I reached a problem. Apparently C:\Users\Admin is taking up 178gb of space. But once inside the folder is basically EMPTY... No folder in that entire area is bigger than 75mb and all but one are empty. Huh? How is this possible? The trail goes cold... I ran a hard drive check through the hp diagnostics thing in the cmos and it passed. Is there a fix to this other than restoring the computer? I'm sure there is a lot of info you guys might need to help answer this question that I'm not providing and for that I apologize, I just don't ever have to use forums to find help often so I'm kinda rusty. But anything you need I'll try and provide if you ask for it. I appreciate any help or suggestions anyone can provide. Thanks. 

Answer:Hard Drive Shows as full but its not...

Quotenew HP g60-519wm laptopYou need to contact the store where you bought this. Right away.These  are selling like hot cakes. You want a emplacement.

9 more replies
Relevance 56.58%

I am a salesman in a tech department of an office supply store, and I had a customer issue stump me today. She had an external drive with lots of files on it she wanted to access. I took the drive, plugged it into a Windows 7 machine (HP quad), and all of the files appeared, no problem.

But, then I plugged the seagate drive into her new Toshiba laptop (also Win 7), and only some of the files appeared. Missing were all photo files, and many other types. I could not figure out why some were missing and some showing.

I took the drive to a third computer with Win 7, an MSI all-in-one, and behold: files were missing. Now it seemed almost arbitrary. Could it be a matter of some Windows updates not yet installed? Why would the exact same drive work differently on three different computers in regard which files were seen and accessible? None were "hidden" files.

What on earth can cause this?

Answer:Hard Drive shows some files, not all

This doesn't seem to describe a problem with the drive to me, but rather how the systems are looking at the media files.

My first shot would be to reset default file associations on her laptop.
Default File Type Associations - Restore

Some installed media programs can cause issues with looking at media files specifically.
I don't think it would be the disk itself as the files are either there or not and shouldn't be visible on any computer if they are not actually there.

A second question - was this a simple usb external or did it have its own power adapter included?

3 more replies
Relevance 56.58%

My thinkcentre M53 (type 10DE) was upgrade to Windows 10. Since then, I need to conect a thermal ticket printer to it and it does not recognise the device.  My printer only shows in other device has a hard drive of 2MB. I have reboot, upgrade every possible driver, change power management setting, tried every usb port available on the machine, changed USB cable of the printer (7 different cables), hooked my printer on another device with windows 10 and it function perfectly. Use that same driver I have on the other machine to add my printer manually and nothing happens. I run out of option since I am not a tecky! HELP please

Gp 58 problem file.pdf ?305 KB

More replies
Relevance 56.58%

i have a 120gig(wd) hard drive installed on xp pro,xp installed from new,format ntfs, bios shows 120gig, xp shows 80 gig, disk manager shows 120 gig, any clues how to recover missing 40 gig please

Answer:hard drive 120gig, xp only shows 80 gig

Can you tell me what motherboard you have and if you know it the ATA speed of your new HDD and I might be able to help - no promises though...

7 more replies
Relevance 56.58%

i bought i 40gb hard rive for my pentium 2 system 2 years ago and it would only show 32 gb because of the bios, now i have upgraded motherboard and chip and windows to xp , it shows 40gb in bios but still shows only 32gb in windows, how can i solve this?

Answer:hard drive only shows 32gb

click here for Maxtors solution to this problem.

10 more replies
Relevance 56.58%

Now when I insert the drive I get the message "USB device not recognized. The device has malfunctioned and windows does not recognize it. Anything I can do to save the data on this drive?

Answer:my hard drive shows malfunctioned what should

First have you tried different USB ports?Sometimes over time a USB port can through regular use become a bit flaky in its connectivity. Using a different USB port can fix this problem.Have you tried a different USB cable?I assume it is in a caddy was it dropped or jarred?You could try a different caddy. They are fairly cheap to buy (e.g. on eBay).___________________________________________? When everything else fails, read the instructions.

3 more replies
Relevance 56.58%

Issue: My 40GB Maxtor hard drive only shows 8GB in my computer C Drive properties. I'm moving this Disk to a "newer" PIII computer.

Request: I'm looking for direction to make it see it all. Note I am aware of some issues with BIOS's not recognizing the disk, although I don't know how to go about correcting this issue.
Any help direction appreciated.

Singel Partition - contains WinSE, MSOffice, loads of software.
BIOS was originally set to auto have since changed it to "User"

Bios details
LBA Mode=on
BLK Mode=on
PIO Mode=4
32Bit Mode=on

BIOS Type: American Megatrends VER: 1.21.04
BIOS Date: 05/11/01
Memory: 119 Mb

Description: intel Pentium III
Vendor: GenuineIntel
Speed: 666.57 MHz
Type: Primary
Count: 1 CPUs found

Description: Windows 98 SE
Platform: Windows 95
Version: 4.10 (Build: 2222)

Answer:Hard Drive (40GB) shows only 8GB

16 more replies
Relevance 56.58%


I have a Maxtor 500 gig Hard drive. I got it a while back as a gift and never had a chance to use it until I got an external case for it. However, when I first started the HDD up, my computer only registered a 150 gig hard drive. I thought that was odd, so I tried to reformat it, but I kept on getting only 150. I tried atleast 3 different external cases and they all gave me the same result.

Does anyone know how to fix this or have anything that I can try to see what's wrong with my Hard drive?


Answer:500 Gig Maxtor Hard Drive shows up as 150 gig

16 more replies
Relevance 56.58%

Hi hope I am in the correct place for this question.I have a toshiba 2595xdvd laptop. Windows ME.I had to manually delete some files to de-install something. When I got done, I had 2 problems: DNS error (which I managed to correct), & now in my computer, it shows disc D, my dvd/cdrom drive as a local disc. The icon even changed.In device manager properties cdrom shows working properly, drivers updated etc, but in performance, it shows there as operating in ms dos compatibilty mode.In device manager, it does not show as local disc D, it still shows as cdrom drive toshiba sd-c2102If I click drive D in my computer, it pops up w a message "D;\ refers to a location which is unavailable"...etc.If I pop in a cd, same pop up.I have powerdvd in this, & I can play a dvd in file mode, if I create a playlist from it, so I believe the drive is good, especially since it worked before the files got deleted. If I pop in a dvd, & go to dvd mode, it shows "no disc in drive" through powerdvd. Eject does not work through powerdvd, but it does from right click menu on drive D. I also have realplayer, that plays a dvd fine, IF thedisc is inserted before I open it. Autoplay will not work.If anyone is wondering what I deleted, & what started all this, it was zonealarm security version 6 point something, which seems to be a big problem all over, look at their boards. I followed their clean uninstall directions to a TI'm pretty much a beginner with computers, have n... Read more

Answer:DVD/CDROM shows as hard drive

try again

3 more replies
Relevance 56.58%

Below is the SiSoftware Sandra report for my hard drive. For some reason it's not showing as SATA II.Any idea what I can do to fix it?The HD is a Caviar SE16 250GB S300 16mbMoBo: GigaByte GA-965P-DS3 SiSoftware SandraGeneral InformationController : 2Bus : 0Target ID : 0Logical Unit No. : 0General CapabilitiesChannel : MasterType : ATARemovable : NoModel : WDC WD2500KS-00MJB0 Revision : 02.01C03Serial Number : WD-WCANK6335390ATA/ATAPI Approved Version : 7.00Cache Size : 16MBDrive GeometryCHS Geometry : 16383 x 16 x 63CHS Total Sectors : 16514064LBA Total Sectors : 488395055Number of ECC Bytes : 50Capacity : 233GBTranslation Mode GeometryCHS Geometry : 30401 x 255 x 63Bytes Per Sector : 512 byte(s)PropertiesIORDY Support : YesIORDY Disableable : YesLBA Support : YesDMA Support : YesFeaturesS.M.A.R.T Support : YesSecurity Support : YesPower Management Support : YesACPI Power Management Support : NoPower-up in Standby : NoPacket Command Interface : NoRemovable Media : NoLook-Ahead Buffer : YesWrite-Back Cache : YesHost Protect Area : YesMicrocode Update : YesAcoustic Management : Yes48-bit LBA : YesDevice Config Overlay : YesActive FeaturesS.M.A.R.T Enabled : YesSecurity Enabled : NoPower Management Enabled : YesLook-Ahead Buffer Enabled : YesWrite-Back Cache Enabled : YesHost Protect Area Enabled : YesAcoustic Management Enabled : NoS.M.A.R.T InformationVersion : 1.01ATA Commands Support : YesATAPI Commands Support : YesS.M.A.R.T Commands Support : YesS.M.A.R.T DataRaw Read Erro... Read more

Answer:Hard Drive shows as ATA not SATA II

look at page 4-16, section 4.3.6 of your motherboard manual. You will see that SATA drives are configured as Standard IDE.So the bios is just telling sandra your configuration in the bios. The drive is still SATA and will perform to SATA specifications.You should really read and digest the motherboard manual. It's there to help you.

2 more replies
Relevance 56.58%

I have a Dell Inspiron Laptop Win XP Home edition, 80 gb Hard drive, The hard drive shows 71 gb used and 8 gb free, When I do a count of all used space I come up with 8 gb used and 71 free.

I have ran Windows Defender, Avast, McaFee, and Reg Fix programs all to no avail.

I have defragged, removed file compression, ran chkdsk /f, looked in to all temp folders and removed all files, examined all log files I can not find a problem.

Does anybody have a suggestion for me to try next. I am now thinking I may have a corrupt hard drive.

Answer:Hard drive shows full when it is not.

When it comes to hard drive space you need to understand there is "administrative overhead" for each file on the drive. So there is a difference between drive physical size and available freespace. With 71gb on an 80gb HD, you ARE out of freespace.

There is a very nice tool to show you your actual hard drive status, WinDirStat (freeware).

Look at the screenshot using WinDirStat, note it has been customized to show freespace and I disabled the other "maps."

Notice the difference in the Size of C: and Free Space.

To help free-up HD space:You should run Disk Cleanup in the System Tools menu at least every other month, just do not delete compressed files
You should Defrag your HD, your problem is you don't have enough space to do this, it will fail.
Try a 3rd-party Update Cleanup tool (see suggestion below) to remove the backup files for old updates that you know are OK. I suggest keeping just a year's worth.
Look at Add/Remove Programs for entries on JAVA, remove all but the latest (see comment below)

Update Cleanup tool: Update Cleanup (shareware)
This will remove the backup files use to Remove updates and the Add/Remove Programs entries WITHOUT touching the update logs so Win Update will still see them as installed. Once updates have been on your system for a a long time without any problems, you are not going to be removing them. So you don't need the backup files hogging HD space.

JAVA: If you have JAVA installes, you may note that ... Read more

3 more replies
Relevance 56.58%

I have only one hard drive active but when I go to my computer, it shows 2; a C: and a D: (Fat) There are some folders and data on that D: (Fat) drive but I am not sure what it is. I would like to get it back down to one hard drive. Please help. Thanks.

Answer:I have only one hard drive active but shows I have 2

is your hard drive partioned
use fdisk in dos

3 more replies
Relevance 56.58%

Hi, I have a wd 250gb hd which crashed. have it connected to another computer. shows up in bios and device manager, but not in "my computer". disk management shows it as unallocated. I'm trying to save/recover important files.

any help appreciated

Answer:hard drive shows as unallocated

Get Partition Wizard free and start its Partition Recovery Wizard, select the HDD, disk and quick scan. See if your files/folders show up. Screenshot the results and double click any partitions and screenshot them too. Post all here.

9 more replies
Relevance 56.58%


I have a dell dimension 4550 series, with XP service pack 3
I was doing some clean up on my pc and noticed my c drive says I only have 55 gigs when it should be 80 gigs

Can anyone tell me why my pc is doing this and how to fix it?

Thanks in advance

Answer:My 80 gig hard drive only shows 55 gigs

have a look in disk management and see if there is any unallocated space

5 more replies
Relevance 56.58%

My laptop using Windows XP had a virus. The Geek Squad said to erase it clean i.e. put it back to it's default settings. I backed up the files to an external HD and put it back to it's default setting. Now C: drive shows it's almost full but thought I erased everything when I cleaned it. The virus is gone. How do I get my space back so put back what I saved.

Answer:Shows Hard Drive Full It's Not

go to search and search all files on hard drive, once done arrange by size and see what is taking all of your space. report back.

for kicks go to C:\WINDOWS\Temp first and make sure you dont have tmp file eating your space

8 more replies
Relevance 56.58%

When I use Disk management, it shows disc 0 with several partitions and a disc 1 with no partitions but 14.91 GB. What is this second disk, and if I delete it, where does that 14.91 GB go?

Answer:one hard drive shows as 2 discs

@tizzy?, welcome back to the forum. Does disc 1 have a lable that tells you what is supposed to do, such as, HP TOOLS?  If not, and you are certain that there is nothing on it that you need, the space will simply become a part of the free space. You can go into File Explorer to This PC / right click on the partition and select Properties.  This will tell you what is on it.

1 more replies
Relevance 56.58%

hey guysi have a lenovo y570 of hard rive 750gb as it says but i just found out that C shows only 654gb ,D is 29gb and i think the hidden partition is 14gb right? , so where is the other 50 gb ? , something else when i open data laifeguard app it shows C as 700gb ?! so how is that  when in my computer it shows 654 ? , i need a simple explanationthanks in advance 

Lenovo Y570: i7-2630QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 750 GB 5400 RPM WDC HDD | Windows 7 Professional 64-bit


Go to Solution.

Answer:Hard drive capacity shows less

A quick Google brings up many threads with the same answer. Here's one:

3 more replies
Relevance 56.58%


This is weird.

I have a newer system...(see specs...) and it uses a Sata drive. Then, on the IDe, I have plugged in a 200 gig hard drive.

I leave my computer on at all times, and after I have left it on over night, the drive disappears!

I have desktop links to my drives, and the one that links to my secondary gets the terror inspiring red question mark next to the symbol of the drive.

When I restart the is there. However, when I let it go to screen saver mode, (which eventually shuts off the screen and turns off the monitor...), god knows when the drive disappears.

ANy ideas or help please??? Thanks friends!

Answer:Second Hard drive shows, then doesnt.

16 more replies
Relevance 56.58%


A friend of mine has a strange problem. He just bought a Lenovo 3000 laptop with windows vista on it, and a hard drive of 80 GB.
A few days after he bought the computer, the hard drive started to show that it's more and more full, and after a few days it got completely full. But he didn't put anything new on it during these few days. I looked at the content of the hard drive with spacemonger, and it showed that the disk is really full. But when we calculated how much was space was actually occupied, it was only about 40 GB (10 GB vista stuff, 10 GB music, 20 GB pictures, a little bit of documents). I made some space by disabling hibernation and deleting some pics and music, but after a few days the disk got full again.
I reformatted the hard drive (only one on this computer) and installed everything fresh: thunderbird, firefox, office 2007, endnote, ccleaner, nod32. There was 40 GB free. A few days later and no new additions or installations, the hard drive is full again!!!
Anti virus/spyware scan is clean.
What could be the problem?



Answer:hard drive shows that it's full but it's not really

here's your system requirements for Vista OS. So once read it appears you would need a total of 55 Gigs just to run the program. Memory suggested is at least 1 Gig. Is this a new computer with Vista installed? They sure didn't leave much in the way of a hard drive to work with. Have you gone onto the Vista site and downloaded the program they have to check your system specs and determine whether it's a good OS for this computer? Maybe someone else knows something more but that is the best I can do. There are other forums here that deal with Microsoft Vista and you might have better luck posting there. Let us know...Jazz

1 more replies
Relevance 56.58%

windows 8 cant find my hard drive on install.My antivirus pick up a virus and i could n`t fix it so i rebooted my system and now on restart it says ,your system has run into a problem and needs to shut down and it just keeps doing this over and over so i decided to reformat my pc and now my hard drive wont show up..

Answer:no hard drive shows up on the install

Check the BIOS to make sure the HDD is being properly recognized. If it's not, it most likely has failed & will need to be replaced. Try running a HDD diagnostics program.

2 more replies
Relevance 56.58%

I have a Lenovo Thinkpad with a 142GB Hard drive and Vista Professional OS, Office 2007, Diskeeper pre-installed. It's not quite one year old. I have loaded Quickbooks, Adobe Suite 8.1.3, Money, Symantec 360, HP Printer Software. Recently, it has appeared that my Hard Drive has been showing that it was almost full, down to 4 GB free. I ran a disk analyzer on it and it shows I have 42GB of data, operating files, program files, etc. but that the used space on the Hard Drive is at 140 GB. I've gone through and cleaned up all files and am de-fragging it right now but with everything I've done I've only freed up maybe 15 GB of space. Is there some program I have installed that may be holding on to that space or having it show as full but isn't? Has Vista been known to do this?

Answer:Hard Drive Shows Full but Isn't

Hibernate & System Restore would be the pones taking the space on your hard disk.

7 more replies
Relevance 56.58%

Ok, so I got a new asus P8z68-V pro motherboard.
Im re-using my current 750gb SATA drive.
I plugged it into the sata port, and start the computer.

When it starts it says "no hard drive is detected!"

I go into the bios, and on the bottom it has a disk drive, and a SATA drive.
It recognizes that the sata drive is there, but when i go to start up it says no hard drive is detected.

I have tried a few different sata ports and it is the exact same thing.
Any idea how to fix it, i am getting very frustrated at this point
thanks a lot

Answer:"hard drive not detected" but the hard drive shows in bios

is it your windows drive, or an extra storage drive?

3 more replies
Relevance 56.17%

I have a hard drive that i'm using as an external drive in an enclosure. it is a 320gb hard drive but when i plug it into my computer it only shows as having a max capacity of 128gb. i've tried reformatting several times and nothing has worked yet. it is a Maxtor S TM3320620A drive. i'm running windows 7 ultimate 64-bit. looking for help on getting this thing to show the right capacity. any help is much appreciated!!

Answer:Hard Drive only shows 128GB Capacity...Help!

right click "my computer"............ manage...........disk management ........hows it look?

3 more replies
Relevance 56.17%

My computer froze at HP screen while booting. Replaced the Seagate 7200.12 500gb model ST3500418AS hard drive with another Seagate 7200 500gb model ST3500641AS-RK. The computer now boots but the old model shows in the Bios and disk management. How do I get it to reflect the correct model?

Answer:New hard drive operating but old one shows in bios

Have you tried the F5 command to reset the bios back to default? Sometimes this can happen if the HDD controller is not set to auto detect your drive. Most, if not all new mobo bios are by default set to auto detect. While in setup or bios hit the F5 key on your keyboard it will ask you to say yes hit y and the system will restart. Then go back in to check if the correct model is listed in IDE settings. If it isnt let me know and Ill tell you how to manually select auto detect. I will need to know what model of bios you have in order to do this because not all bios have settings in the same place.

Hope this helps you

3 more replies
Relevance 56.17%

I have a Western Digital 1TB Hard Drive (External).
I use it 99.9% of the time on my Windows 7 64bit computer to store pictures/videos and backup important files.

It was working fine until I plugged it into a MACINTRASH to backup files from that computer.
It was a simple copy and paste from the MACINTRASH to the External HDD.

After copying the files from the MACINTRASH, I plugged it back into my PC.

My PC no longer recognizes my external HDD. I unplugged the power, plugged it back in. Same with the USB cable. Rebooted. Then my computer wouldn't reboot and windows did its automatic self repair. Nothing.

I unplugged EVERYTHING and left it that way for about 30 minutes. I plugged EVERYTHING back to my computer and turned it on.

Windows booted up fine. I plugged in the external HDD and windows had that little icon telling me it was installing drivers. I was excited to think that it finally would recognize my external HDD.

Of course, it didn't work. The HDD does not show up in my computer. It does show up in Device Manager and Disk Management.

Device MangerUnder Disk Drives it lists it only as "WD"
My other drives it has a nice long name like "WD 7500AAK External USB Device"
Under properties it tells me Volume information for the disk cannot be found. (The very first time I did that prior to the reboot it said there was 0MB of space on it).
It claims the device is working properly
Disk ManagementAt first this said that I must initialize my disk.
N... Read more

Answer:My Hard Drive no longer shows up in My Computer

This got mine back on track last night from trichard13

9 more replies
Relevance 56.17%

Cannot save to my laptop hard drive "C". It keep showing that the drive is full when in actual fact there are plenty of space. Please help. Many thanks.

Answer:Cannot save to my hard drive. It shows my disk spa...

Hi royang67 Firstly check to see if there are any unwanted programs installed. If so, uninstall them. It will be worth running Disk Cleanup on your drive - type in the search box from your start menu/screen Disk Cleanup right click & choose Run as Administrator. Select OK on your C: drive. Once it has finished calculating make sure all boxes are checked, click OK, then Delete Files. System Restore can take up lots of space, so go back to Disk Cleanup now select the "More Options" tab. On the "System Restore & Shadow Copies" part, select "Clean Up" / Next, follow this guide, to do a Disk Check. If you're STILL showing as Disk Full, then it may point to a failing hard disk, and it will need replacing. You have made backups of everything, yes?

1 more replies
Relevance 56.17%

Whenever I select my computer/c drive the amount of free space keeps changing
Examples: One minute say 99gb, next minute 2gb. Then 99gb then 67gb.
The values are all over the place. Even restarting doesn't help
Any ideas why this is happening and is it signs of a serious condition.

Any help is appreciated.

Answer:Hard drive shows inconsistent volumes

Follow this please:

Disk Management - Post a Screen Capture Image

2 more replies
Relevance 56.17%

As the title says, Earlier today windows wouldnt even load up as i kept getting a blue screen. after i get this fixed, my 40 GIG I:/ Drive will not show up in My Computer. Any help?

*Clicked on wrong forum, would a mod please move it.

Answer:Hard drive shows up in BIOS but not in My Computer

Is the drive a secondary one?

10 more replies