Computer Support Forum

Kodak Photo Frame Wont Turn On

Question: Kodak Photo Frame Wont Turn On

Hi there

My Kodal Easyshare digital frame (SV-1011) wont turn on.

This began after i plugged the frame out of the wall while it was turned on.After this it wouldn't turn on when i plugged it back in.

There is a light on the plug/adapter. It stays lighting while i have detached the power cable from the frame itself but when i attach it back into the frame the light starts flickering faintly.

Could this indicate that something is fried in the frame or adapter? Has anyone had any problems like this have any tips or advice?

Id really appreciate it..

Damien

Relevance 100%
Preferred Solution: Kodak Photo Frame Wont Turn On

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Kodak Photo Frame Wont Turn On

closing duplicate, please continue at http://forums.techguy.org/digital-p...-kodak-photo-frame-wont-turn.html#post7609260.

1 more replies
Relevance 93.38%

Hi there

My Kodal Easyshare digital frame (SV-1011) wont turn on.

This began after i plugged the frame out of the wall while it was turned on.After this it wouldn't turn on when i plugged it back in.

There is a light on the plug/adapter. It stays lighting while i have detached the power cable from the frame itself but when i attach it back into the frame the light starts flickering faintly.

Could this indicate that something is fried in the frame or adapter? Has anyone had any problems like this have any tips or advice?

Id really appreciate it..

Damien
 

Answer:Kodak Photo Frame Wont Turn On

Does it have a built in battery? Maybe it's charging.
I have a different brand and sometimes I have to reset the card in it to show up again.
 

1 more replies
Relevance 66.01%

I can't figure out how to copy my photos from my computer to the picture frame. I follow the directions and where it says click on "copy to . . . " I don't know where to copy it to. The directions are not explicit enough (for me anyway). Anyway, nothing ever appears on my digital frame. The model no. is SV811. Thanks for any help.
 

Answer:Kodak digital picture frame

Are you trying to load images using the USB cable or with a media card?

If USB, does a new device get recognized and pop up with a new drive letter or identifying description in the devices with removable storage or other area on the My Computer window? That's where you copy to.

If you're using a media card, same thing, copy it to whatever drive letter or other device listed in the My Computer window that is associated with that media card and then transfer that media card to the picture frame.
 

3 more replies
Relevance 60.27%
Question: Kodak Photo CD

For the past 2/3 years, I have been having my Kodak Ultra colour film processed to CD in addition to the usual prints, in anticipation of getting my new PC, which I now have.The PC runs Win XP Home, but looking at the collection of CDs I have, the System requirements in the earliest ones run from W95 to W98, and on the latest CD, received only yesterday, runs from W98SE to Win ME. In addition, the software seems to have varied. The earliest seems to be Disney orientated, whereas the latter ones apparently have software from Intel. I also have one CD from Boots which makes no mention of system requirements.My question is, can I view all these on XP? I cannot believe that each time an OS is updated, it renders my "photo album" obsolete! I accept that programs do become obsolete over the years, but the family collection of photographs goes on for years.Any ideas?

Answer:Kodak Photo CD

Have you tried opening the CD files on your new PC? I would think that any decent photo editing software will recognise all your different formats. You can download the latest "Free" software from Kodak's website at, click here It's basic, but will enable you to view/alter contrast/brightness, remove red-eye, and save or print. Regards. j.

10 more replies
Relevance 59.45%

I am trying to run the kodak inkjet photo program to create photo cards, but when I try to add a picture the following error occurs: run time error '429', active X component can't create object...I am using windows 98..gateway pentium III..Please help...
 

Answer:kodak inkjet photo kit

Hiya and welcome

Well, searching for this is proving fun. There are quite a lot of articles on Runtime 429.

I assume you are doing this offline so I can rule them out.

Are you using Office programs when trying this?

Might need a bit more information on this. Go to Run and type in MSINFO32

On the left choose Software Enviroment, then Startup Programs. Copy/paste them here.

have a look at this:

http://forums.techguy.org/showthread.php?threadid=54558

Regards

eddie
 

1 more replies
Relevance 59.45%
Question: Photo frame help

I'm sure this question has been asked before here but I can't find it. I am looking for a download program (pref. free) to frame my digital photos, all I want is just simple frames and a program that is not complicated to use. All the ones I have seen are mainly web design programs. Can anyone help please.

Answer:Photo frame help

For a collection of greyscale frames click here Try a google search for more

3 more replies
Relevance 59.04%

My computer has 2 drives. c and d.

My c drive is full. I uninstalled the Kodak software from my c drive and reinstalled it to my d drive. When I try to transfer photos from the camera, it continues to try to transfer to the c drive. How do I change the path to direct the transfer to the d drive?

Thank you

Rich
 

More replies
Relevance 59.04%

I have a kodak easy share photo printer why wont it work on windows xp

Answer:cant use kodak photo printer on vista xp

did you install the drivers for xp? you listed your operating system as vista. Are you using vista or xp?larry

2 more replies
Relevance 58.63%

Anyone have any links or info on a way to make a cool OS for a photo frame?

I have an old laptop I would like to hookup to a monitor and use as a photo frame/info board but I have not found a good lightweight OS to use.

Preferrably I would like to be able to add some widgets and have the ability to use a photo slideshow that loads pics automatically from a network share.

I have found a few people talking about how they did it, most involved a ton of customization to linux distros without really any instructions on how they do so. So I was curious if anyone has come across an OS or program that works well for this?
 

Answer:Need a good OS...for Photo Frame

Hmmmm.... I would be interested as well. That would be cool
 

1 more replies
Relevance 58.63%

how do i transfer photos that are on my computer to a digital photo frame with an sd card. do i need a card reader .thanks

Answer:digital photo frame

Does the cframe have a usb connection?if not then its copy files to the card, you will need a card reader/writer

2 more replies
Relevance 58.63%

how do i trancefer photos from computer to photo frame.leaflet says insert thumb drive to the usb port.what is this.the box states usb flash drive can be used.am new to computers so i dont want to go out buying stuff i dont need.welcom any help edward john.

Answer:pc line 7in photo frame

Essentially the frame will come with very little in built memory, so to have a reasonable number of pictures on it you will need further memory, in you instruction booklet the types of memory that are compatable should be listed e.g a thumb/pen flash memory drive. Photos are copied to these usb drives in the same way as you copy files to any drive. Most frames may also use one or more of the memory cards used by digital cameras - In fact looking at the pcworld site the pcline frame accepts SD/MMC/CF/MD/MS cards.The usb cable may be used to transfer from the pc to the frame inbuilt or additional memory.

2 more replies
Relevance 58.63%

This last Christmas my son sent me a digital photo frame. My problem. I don't own a digital camera.
My question.
Is there some way I can transfer pictures from my PC to the digital photo frame?
 

Answer:Digital photo frame

You'll need a memory card, say an SD card.

Plug the card into the frame and connect the frame to your PC via the supplied USB cable. If it doesn't have one, which the cheaper ones don't. You'll need to buy an SD card reader instead, this connects to your PC and then the card goes in that. You transfer the images onto the card at your hearts content and once complete plug the card into the frame and voila!
 

3 more replies
Relevance 58.63%
Question: Photo Frame Video

I have a photo frame that is suppose to play music and the video pictures. I took the pictures with my camera, played it on my pc but when I put the chip into the picture frame it only plays the picture without the sound. How would I use the chip in the photo frame to play the video and sound? I would appreciate your assistance or direction to where I could get some information.

thank you,

Wadda
 

Answer:Photo Frame Video

Didn't know they did that.

I am sure the make and model of the pic frame will go a long way .
 

2 more replies
Relevance 58.63%
Question: Digi Photo Frame

ive just purchases one of them small didgi frames Keyring type,now when i connect me usb too it then pc ,an on the menu of the photo frame it s saying cconect usb, i click yes then in me try at bottom of me desktop ,theres a icon too safely remove usb. Problem is i dont get the viewer too download photos cominup, ive just done exactly the same connection on my wifes laptop and she get a Menu etc showing too download pics, yet on mine it doesnt show nothing and ive done exactly the same. im on windows xp home too. any ideas plz.

Answer:Digi Photo Frame

When you plug the keyring into your computer swanny, do you get a menu coming up on the screen asking you what you want to do. It would give you a few options in a list. If you dont, then after you have connected the keyring , go to "My computer" and click on there to see if you have an extra drive showing. If you have then this will be you keyring. It will show as a letter, the same way as your "C" drive does but will be a different letter. If it does then you can go to your photos that you want on it and highlight them then go to the left of the screen and click on "copy". This will then bring up the list of drives you have and just pick the one that is your keyring. Hope this helps you.

9 more replies
Relevance 58.63%

Picture gone very dark hard to see any ideas

Answer:Digital photo frame

Have you tried changing the batteries?

5 more replies
Relevance 58.63%

just bought a digital photo frame, put all my pics on my new memory card, but once put in the camera, all the pictures are dark and the colour of the faces are orange?????

Answer:digital photo frame

sorry not camera, once I put the memory card in the photo frame, all the images were dark and orange, but they are not like that on my pc.....

5 more replies
Relevance 58.63%

I have a Dell Inspiron running Windows 7, Home Premium. I have tried everything I know to get rid of the Free Photo Frame app in my Programs (x86) file. Windows 7 uninstaller won't work nor will several other uninstallers I have used. Anybody got any ideas? Thanx, olejs

Answer:How to get rid of Free Photo Frame app?

Did you try Uninstaller: "C:\Program Files\Free Photo Frame\unins000.exe"

1 more replies
Relevance 58.63%

Looking to buy a digital photo frame and need the biggest display possible as my wife has poor vision. Have found a 15" screen but wonder if there is a frame that can be connected to a TV.

Answer:Can a TV be used as a digital photo frame?

Burn Photos to CD / DVD as slideshow and play in ordinary DVD player attached to TV.

7 more replies
Relevance 58.63%

We had one of these devices (a Sony) for Christmas and have managed to get it set up so that it will show photos which have been put on to the internal storage system. However, supplied with it was a card that fits in to one of the available slots.This is great, but how do I get photos on to the card? I do have a card reader which should be fitted internally in my computer, but I am loathe to jigger the case up when I try to install it. (It seems to be deeper than the slot but not as wide as the slot it is supposed to fit in!)The obvious thing to do is to buy a separate external card reader, which are quite cheap, but will I be able to transfer photos to the card through an external reader? Or does it just read a card that is already loaded, i.e. straight out of the camera?ThanksTonyV

Answer:Electronic Photo Frame

The photo frame will read a card straight from a camera or one filled with pics from a PC.The PC will need a compatible card reader.

8 more replies
Relevance 58.22%

Oh hello there!
I used to think I was pretty damn good at this computer and technological business, but today--just a few hours ago, really--I received my Kodak Easyshare 753 and after charging it I went ahead and took some test photos.

Now how do I transfer the photos?!

Unfortunately the dinky book provided by Kodak only shows two pictures: one of a computer and one of the camera with a USB cord connecting them. It also notes that the shooting option dial is on 'AUTO' which probably means....????something????

Too Long; Don't Read How do I transfer photos from camera to Computer?
[I have Windows XP Inspiron 1501 and I'd also like to point out that when I first connected the camera it said: "New hardware found <cameranameand#s>" and then it said "warning! hardware is [something;I forget] and may not work!"

I think it was "corrupted" but I really REALLY hope not!

Help is always appreciated!
 

Answer:Kodak Easyshare 753 photo transfer difficulties.

7 more replies
Relevance 58.22%

I have an older Kodak Easyshare (10 years old). I have photos on the internal memory, and the camera is not working - won't power up, totally dead. Is there a way to retrieve photos from the internal memory when the camera won't power on? Someone mentioned they might have a card inside, and I took the camera apart - no card inside. Anyone know how to retrieve the pics from the guts of the camera?
 

Answer:Photo recovery from broken Kodak Easyshare

If the camera is completely dead and its stored on the internal memory, I dont think there is anything that you personally can do. However you could try contacting a data recovery specialist, they can work magic sometimes
 

1 more replies
Relevance 58.22%

We are updating from an older Dell with XP, to a Dell desktop Inspiron 660 with windows 8. We have been using Kodak easy share software for editing/album management, on the old desktop which is no longer supported by Kodak. The xp version allows us to load from the camera directly to the Kodak software/albums. Windows 8, loads the pictures only to "my Pictures" in the documents file. Is there any way to avoid the 2 step process of moving photos from the document files to the Kodak software, and just go directly to the Kodak software/album.

More replies
Relevance 58.22%

I just had some film copied to Kodak Photo CD. Following installation program, an error message reads Interger Void, and something to do with "Director Program Error". CD info indicates there may be a problem with Cyrix chipset, which I do have (6x86MX).

Does anyone know if there is a way around this. Could I simply replace the Cyris chip with an Intel - will it auto configure BIOS? Or is there a file that will let the CD be compatible?

My other Intel computer loads the CD fine. (Also, although my picks are super sharp on developed paper, the disc pictures look awful). Digital transfer does not do justice to prints. Would a flatbed scanner have better results?

Thanks,

Paul K.
 

Answer:(Resolved) Kodak Photo CD/Cyrix chip

16 more replies
Relevance 58.22%

My Kodak Easy Share C143 has suddenly started numbering the photos weird. It started numbering the photos by increments of 10, then it started inserting the letter B into the file number in place of the underscore, which puts the photos in the wrong order. I tried clearing the memory card and starting over, and that worked for awhile, now today the problem returned.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4061 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1806 Mb
Hard Drives: C: Total - 238469 MB, Free - 106662 MB; D: Total - 238466 MB, Free - 102678 MB;
Motherboard: ASUSTeK Computer Inc., K60IJ
Antivirus: PC Tools Internet Security Anti-Virus, Updated and Enabled
 

Answer:Kodak EasyShare C143 photo numbering off

10 more replies
Relevance 57.81%

How easy is it to "inadvertently" delete photos from a digital photo frame? There were photos on it but not any more! Any help gratefully received. Thanks

Answer:no photos on digital photo frame

I suppose it depends on whether theres a delete option on the frame.I bought one for my mum last Xmas and theres no delete option on the one I got her. If you want to delete anything you have to either put it in a card reader linked to a PC or into a digital camera.

2 more replies
Relevance 57.81%

Anyone have opinions on digital photo frames? - Which are better - which to avoid?
 

Answer:A good digital photo frame?

10 more replies
Relevance 57.81%

I've got the same problem. I use Vista Home Premium 64 bit.
Any answer yet?
Thanks,
Frank

Nothing happens when I plug my keychain into the usb port. And I cannot start the software manually. windows says it isn't a valid windows program. I use Vista Home Premium 64 bit.

My keychain is new and the software doesn't start and I can't get the software to run either. Get a message that DPFmate is not a valid Win32 app.
I'm using Vista Home Premium 64 bit.
Have you any answer yet?

Answer:Digital Photo Frame Keychain

check for a vista 64x driver

1 more replies
Relevance 57.81%

I got a new digital photo frame and am trying to get images from my computer onto the frame. I can load about 60 images onto the frame if I use it's external memory (the frames) but a memory card will obviously hold more images. The problem is..how do I get get the images from my computer onto the memory card so that I can plug the card into my frame?? The instructions with this Philips frame are minimal and the tech support online is horrific. I tried plugging the empty card into my camera and plugging the camera into the USB port but nothing is recognized on "My computer" and I assume that is because there are no images on the card.
 

Answer:Memory Card to Photo Frame?

6 more replies
Relevance 57.81%

hey. recently, i was upgrading the firmware of this photo frame and the power cord was accidentally pulled out. after this everytime i pressed the power button, all it did was turn the light on the button on. the screen did not come on and i do not hear any sounds from it. I think i have bricked it :S is there anything i can do to unbrick it? thanks
 

More replies
Relevance 57.81%

I have scanned a heap of photos to add to a SD card for my DPF. The scanner is an Epsom flatbed. To scan/edit and upload the pictures I used Media Impressions 2 which is the software that came with the scanner. The problem I have is that when I try to upload only some of the digital photos are transferred to the SD card the others come up with a message
"Cannot copy xxxx. The directory or file cannot be created"

Can anyone help me around this
 

Answer:Pictures for a digital photo frame

Do you have a space (storage capacity) problem perhaps? Are the first scans uploaded taking up all the space, and it then refuses (naturally) to add any more?
 

5 more replies
Relevance 57.81%

what would i use? not really asking how to do this just a push toward the right direction. are there any progeams for windows 7 that can reprogram rom(firmware, flash memory?

Answer:reprogramming a digital photo frame,

I'm pretty sure this can't be done from a normal PC. Usually the programming for such a device is ROM (read only memory) and the manufacturer goes through a couple extra steps to insure you can't do this. What are you trying to get it to do?

4 more replies
Relevance 57.81%

I purchased this about a year ago and it worked fine now the screen has gone very dark and hard to see any answers brightness control does not help.

More replies
Relevance 57.81%

When the photos have completed the cycle get thumb nails. Have tried repeat but doesnt seem to have effect, am I doing something wrong ??

More replies
Relevance 57.81%

can anyone explain how to freeze frame a vidio to install it on a digital photo frame
 

Answer:wmv file to diital photo frame

easiest way would be to play the video file and pause it where you want and do a screen capture

if you use VLC media palyer it has a capture feature built in
 

1 more replies
Relevance 57.81%

My museum recently purchased a digital photo frame (DPF156A1BK) for use in an exhibit.

I loaded the slideshow I wanted it to run, and it ran fine. Once. I need it to run continuously, which is what I expected a digital photo frame to do.

Was I incorrect? Has anyone encountered something like this before? Any advice would be greatly appreciated.

Thank you!
 

Answer:Digital Photo Frame Question

whats the make and model - some i believe only play through once
is there a setting menu ?
 

4 more replies
Relevance 57.81%

Recently received a Viewsonic Digital Photo Frame as a gift (Model DPX804BK). Unfortunately there were no clear instructions on how to move pictures and music from my computer to the frame. The Viewsonic web site doesn't reply to repeated questions either. The booklet I got only lists the function of various buttons, one of which is "Browser" mode. I store most of my photos in Picasa 3. Any ideas on how to load photos and music would be very much appreciated.. I am running WIndows XP Professional.
 

Answer:Digital Photo Frame Usage

Hello and Welcome to MajorGeeks GrandPa Bob, Does your model photo frame have a USB connection and cable to connect to your computer? When connected, XP should detect it as a new drive in My Computer and you should be able to drag and drop your photos into the correct folder on the new drive. The ViewSonic photo frame I have has a slot for an SD flash card that I can transfer directly from my camera to the frame as well as the drag and drop function. Good luck

 

6 more replies
Relevance 57.81%

I received a digital photo frame for Christmas. I can insert a flash card in it to display photos. I have photos saved on my computer that I would like to add to the flash card. I have a card reader that plugs into my computer but have no clue as to whether it is possible to move photos from my computer to the flash card. Thank you all for your advice. I have Windows Vista Home basic.
 

Answer:Solved: Digital Photo Frame

Most frames will have slots for all the Memory card types including USB memory sticks.

just copy the pictures using "My computer", with the card inserted into the PC's reader you should see a new drive letter ( probably several but the others will not read if they are have no card).....what I do is open the folder where my pictures are and shrink the folder windows so I can see both folders...(Picture folder and the card's folder) then drag the pictures to your card reader folder...* hold the CTRL key to select the pictures indvidually or CTRL A for all in the folder (make sure you understand this part so you don't select every single file). There are several ways to to this.

I use software to convert my pictures to a smaller file size so I can get more pictures, once you get the hang of copying I can explain if you like
...with your frame turned OFF...plug in the card, then turn it on..it may work right away or you may heve to select the source because some frames have built in Memory.
 

2 more replies
Relevance 57.81%

Looking to buy a digital photo frame as a birthday present for my grandmother, which i can put about two hundred photos on it, and it will flick through them every few minutes.?I want to know, which one is a decent and easy to use digital photo frame? - and a fairly good price/?? Im open to any suggestions...Thankss

Answer:a good digital photo frame anyone??

There are any number available at many different prices. It depends on exactly what you are looking for. A quick Google gave me these in the UK click here

4 more replies
Relevance 57.81%

I've recently set up a NAS unit on my home network, on which I've stored all my photos. Does anyone know of a wifi digital photo frame which can display photos direct from NAS? So far, all I've found is frames which need a PC to be running Windows Media or similar to stream pictures.

More replies
Relevance 57.81%

Hey allIm new here and hoping for a touch of help.I have just bought a Jessops 8inch digital picture frame 2gb and am struggling to get videos to play (although they should). The video is saved to a usb stick in .avi format as instructed but ive tried playing it direct from the stick and also transferring it to the frames internal memory. It appears to transfer ok but then not play.Any help gratefully received!!Thank you

Answer:Jessops digital photo frame

Hi, and Welcome to the forum - I am afraid I cannot help directly, though I do have a similar frame, mine does not play video's. However, as these things are really quite straight-forward to use, even though the instructions may not be easy to follow, I would guess that yours might have a fault. In your shoes, I would take it back to Jessops and ask them to show you how to play the video (taking your own along to test), if it then did turn out to be faulty, no doubt they would be able to replace it for you there and then.

1 more replies
Relevance 57.81%

My photo card will only fit into my Kodak ESP5 slot - I think I've wiped pics data by removing card before it had finshed transferring to my computer - is there any hope for retrieval?

Answer:Kodak ESP5 -lost photo data during transfer

From cfc msticks smartmedia etc.Smart recovery click herezero assumption click hereRestor Pen Drives click here

10 more replies
Relevance 57.4%

Tried WMV, AVI, Divx7 - nothing works.
I tested my SD avi file (700Mb) in shop with all DPF that said "plays avi movies", but none of them work.
Someone must know - what's the missing trick?
 

Answer:Digital Photo frame avi movie won't play

I'd convert AVI to WMV and then try it in DPF. IF AVI is shot in High Definition, file will be too much for DPFs to handle.
 

2 more replies
Relevance 57.4%

Can any one sugest suitable software to turn a Old Panasonic tough book in to a Digital photo frame ? The laptop is curently running Windows 95, and has 16mb ram and 250mb harddrive ! is their a version of linux that would be happy on this machine ?
 

More replies
Relevance 57.4%

Hi,I am looking for a program which will turn an old digital photo frame into an analogue clock face, preferably freeware.Any ideas anyone ?

Answer:Clock program for Digital Photo Frame

Was not able to find any 'programs' freeware or not. But I found this: Word clock from cheapo photo frame

3 more replies
Relevance 57.4%

I read a previous post concerning my exact issue, so it looks like you'll be able to assist me. Anyway, I bought a photo clock viewer from a garage sale, and it did not come with anything such as a manual or USB. I puchased a USB which works fine but my computer does not seem to want to bring up an application to where I can transfer photos over to it. Sorry, all it says is FC on the back. Any advice? Thanks for the assistance!!
 

Answer:FC Digital Photo frame clock viewer

6 more replies
Relevance 57.4%

My Photo Frame has no option to show the picture in a random order. I wish to randomize the pictures once in a while in the SD card, so have several questions here:
1. Do you know in what order a simple Photo Frame (Coby DP-843) reads the picture from the SD card? by the name? By the date? by the order of the files in the FAT system? other?
2. Any idea how to re-order files in the SD card? All the ordering under Win7 of files are just for display and not really changing the order. Any utility for that? Any way to do it manually?
3. Similar to my previous question, how can i copy files from my PC to an SD card while controlling the order of the copy - for example, by name, date, etc ?

I'm sure many photoframe users had similar problem. And tricks and ideas how to randomize the pictures in the slideshow?
Thanks
Eran
 

Answer:Randomize Pictures in SD card for Photo Frame

The ordering of the files in Windows is not "just for display" as you seem to think. That order can affect in what order those files are burned to a CD, in what order they are played through a media player, and indeed in what order they are shown in a slide show if they are picture files.

You can change the order by renaming them with a prefix number, so the order is determined numerically instead of alphabetically.
 

2 more replies
Relevance 57.4%

I recently acquired a digital photo frame and my 8 gig flash drive works great but when I try my 1 gig "Intergral" flash drive nothing happens. I've just loaded some photos onto it and can view them but as soon as I put it in the frame nothing. Helllppp.

More replies
Relevance 57.4%

Does anyone know what needs to be done to allow a Photo Frame (with a USB input) to operate as a laptop screen repeater.When sailing, I use my laptop with a GPS input as a chart plotter, but because of the environment, I have to keep dry it inside the boat. It would be much more convenient to waterproof a photo frame and have repeat the laptop screen by the steering position.Any ideas, please?TB

Answer:Photo Frame as a Laptop Screen Repeater?

Not likely I would think.To get full computer use you would need the normal VGA connector not USB.But wait - every time some one says 'Not likely'Someone somewhere just did.

10 more replies
Relevance 57.4%

delete photo albums contents on a pc & turn off the photo album app

Answer:How do I delete the contents of photo albums on a pc & turn off the photo album app

I too would like to know how to delete an album in the new Windows 10 Photo App. 60 albums popped up with the most ridiculous selection of photos. I am not about to go into each album and delete the pictures. . . the album is still there. . . . my only option at this point is to disable or delete the app. Also, I can't get anything but tiles. . .how do you switch to list of dates???? I have the biggest tiles in the app. I can see only see 3 pictures at a time!

more replies
Relevance 56.58%

I was at my parents' house, cleaning out a room they used for storage, and I came across the pieces to my old HP Pavilion DV5000 laptop that went kaputzki about a year ago. Really, I'm surprised it lasted as long as it did, but I figure I got lucky.

Anyway, the thing is about 85% junk at this point. The fan in it died, the keyboard was missing keys and the hard drive went belly-up, too. The only thing worth salvaging (at least I think it was worth salvaging) was the monitor, and I thought, "That would make a really nice digital photo frame..."

After doing a little of my own research, I've found many guides on just converting the whole laptop into a photo frame, but since the computer itself is a steaming pile of slag, that's out of the question. Further, I've found that some people mention that it's difficult converting the monitors into anything useful due to the fact that lappy monitors use graphics controller chips, or something of that nature anyway...

So does anybody here have any ideas or suggestions? Would it be possible to, maybe, buy a cheap digital photo frame, rip it open and replace the screen? Or build a really basic computer out of old parts and maybe change the connection to VGA then build a casing around it?

[Just a side note, I was thinking about putting the whole thing inside the housing of this old lime green Philco television with rabbit ears a friend of mind gave me. Figured this would be a nifty way to re-use o... Read more

Answer:Old Laptop LCD Monitor Digital Photo Frame Project

And, of course, I would misspell the word "frame" in the title... Shows how much I use the preview button.
 

1 more replies
Relevance 56.58%

My wife takes digital photos but is a technophobe and so the results are on my computer. She looks over my shoulder to choose which ones she wants put on a CD to be printed.
I'm wondering if there is a digital photo frame available that will at least display the image file number or, better still, has a menu to move between folders. I could then load up a memory card and leave her make a note of the ones to have printed.
I've tried suggesting a laptop............

More replies
Relevance 56.58%

Got the above item over Christams and using it a Windows 7 Ultimate PC. The frame connects ok to the PC as the extra drive shows up as the USB link goes live. However the jpegs copied over to the internal memory or the pics put onto an SD card have all - bar one - failed to show up on the display! I have tried copying to the root directory and also to the folder as the instructions stipulate.Suspect it is some user error - can someone tell me what I have to do to resolve this please?

Answer:Sony DPF D80 Digital Photo Frame Pics Not Showing

There is a menu option to change to the folder containing the pictures - you have done this haven't you? If you have it sounds more like a problem with the unit - I was given one of these for Christmas and followed the instructions to make a folder then copied them across and it has worked perfectly. I notice that it can also be used like an external hard drive. Try copying the files from it back to your pc and see if they are in good condition by displaying them.

3 more replies
Relevance 56.58%

Is there anybody out there who knows how to erase the 'favorite' pictures I have inadvertally created on a Vason 7" digital photo frame (DPF70A) ??????????
 

Answer:Internal memory earase on Digital photo frame

At a guess, I'd say remove the memory card from the frame, then access the frame menu and find 'delete' or 'format'
 

3 more replies
Relevance 56.58%

Hii recently bought a bluetech 10.2 digital photo frame it worked ok a day or so then i turned it on today and all i get is a blank white screen.I have been trolling the internet to try to find out if/how this can be rectified but have not found anything, was hoping someone here could help out, as i am now pulling whats left of my hair out.

Answer:Bluetech digital photo frame blank screen

Hi email me at [email protected] and i will send you instructions and picture of what you have to do, it does invovle taking it apart and a little soldering and about 50p for the part to fix it so some electronics knowledge is required but is a simple fix reallyBest Regards

1 more replies
Relevance 56.58%

Hi, i've successfully copied jpegs and music files onto the digi photo frame and played them individually. However, I am unable to play the music at the same time as a slide show. I would have thought this to be automated. I have tried numerous options with the remote control, the manual is poor and support by Sumvision website is non-existent. Do I have a duff unit or is there some magic-trickery I have to perform to get music and a slide show workling at the same time?, many thanks for any replies....
 

More replies
Relevance 56.58%

I want to put my old photos on to a digital photo frame and I guess this will have to be done via an SD card.Rather than scan the photos on to the computer (very time consuming) I thought I would use my digital camera (Fuji finepix F30) to photograph them. Could I then use the camera SD card in a digital photo frame? If so, any recommendations as to a good one to buy?Thanks

Answer:Moving photos to digi photo frame via Finepix F30

Buy a frame that accepts SD cardsAs with so much stuff - Brands and badges have little meaning with regard to quality.I guess the best thing to do is to load a card with digi pix and take it to a shop who is willing to demo a frame.

1 more replies
Relevance 56.58%

I have purchased the above photo frame. The test photos that come on it are perfectly sharp and bright. I added my photos and they appear over exposed and not really sharp. Some of my photos are directly from my digital camera to computer then to the sd card and some I have scanned in to the computer from a photo, photoshoped them and then added to the card.
I originally scanned using 200ppi and then tried some at 600ppi and there was very little difference. The photos look very sharp and exposed correctly on the computer but when put on the frame they are not. Does anyone have a solution? I would appreciate any help you can provide.
 

More replies
Relevance 56.58%

Some of you may be familiar with the Kodak Easyshare Gallery website. Its a website for storing and ordering photo's. Anyway I recently ran into a problem that makes the option to upload multiple photo's at once not functional. I have contacted thier tech support but thier suggestions have yet to help. They suggested I do the following:

1. Start Internet Explorer, go to the "Tools" menu and select "Internet Options"
2. Under "Temporary Internet Files", click "Settings"
3. Click "View Objects"
4. Right-click the object called "Ofoto Upload Manager Class" and choose "Remove". If there is also an object called "EASYSHARE Gallery Upload Manager Class", right-click this object and choose "Remove".
5. When it asks to confirm, click "Yes".
6. Close all property windows that were opened.

The problem is once I remove the file and refresh the folder the file just mysteriously re-appears so I can't get rid of it and the problem is not resolved. The file is some kind upload activeX file which they say is the problem so I need to remove it and once I attempt to upload multiple photo's again the problem should be solved but I can't get rid of the file. I've cleared the cache, temporary internet files, cookies, etc and still I can't get rid of the file. I've even booted into safe mode and tried it but that didn't work either.

Anyone have any suggestions as to how to permanently ... Read more

Answer:Kodak Easyshare Gallery Website (uploading Multiple photo's problem)

Try manually going to
C:\WINDOWS\Downloaded Program Files
locate it and delete and empty recycle bin.

3 more replies
Relevance 56.17%

Samsung Digital Photo Frame Features Bonus Malware

Amazon is warning customers that purchased the 8? Samsung Digital Photo Frame about a worm that was included on the driver CD. Apparently, the W32.Sality.AE worm only affects XP users so if you picked up this frame for a family member, you should send the link above to them. [H] public service announcement, signing off.

The alert involves the SPF-85H 8-Inch Digital Photo Frames w/1GB Internal Memory, designed to work with Windows-based PCs via a USB connector. They were sold between October and December 2008 for about $150.

More replies
Relevance 55.76%

I bought a Kodak Professional ML-500 Digital Photo Print System (hereafter referred to as 'The (200 pound) Cube'). It will print one sheet, at the right size, of just the glossy protective coat. THen, it prints all of the colors to make up the picture, on a seperate piece of paper. It looks great, but it doesn't have the glossy coat for protection on it. I emailed Kodak, but they aren't helping. Anyone got any ideas?

More replies
Relevance 54.94%

Hi all. I have a kodak easy share c633 that is having problems turning on. It sometimes does and sometimes doesn't. It worked for a little while, even allowing me to transfer photos to pc. Green light stayed on while on computer. then nothing.

ha ha! now it's back on again.

is there a firmware fix for it?

any help or suggestions will be appreciated.

i am getting a new camera, but need this one for selling items.

Thanks.:confused
 

More replies
Relevance 53.3%

I have a HP610-1190f all in one with a cd/dvd/player/burner -just downloaded windows 10- how do I get my old picture cd's to either play or get them off the cd & on the computer?

Answer:kodak picture cd wont play

Insert the CD disk. Hold down the "Windows" key (bottom-left) of your keyboard, and touch/release the 'E' key.Release the "Windows" key. It should open File Explorer.  Right-mouse click on the icon for the CD-device, and choose "Open" or "Browse", to view the files & folders stored on the disk.  

1 more replies
Relevance 52.48%

I have a new Kodak Easyshare..It wont respond like the on..off is getting weaker and I take a picture and it doesnt show up in camera. Is this the battery? ive taken a few pics, pretty many but have no idea what to expect with a battery going dead? is this the problem.
 

Answer:Kodak Easy Share wont respond

10 more replies
Relevance 52.07%

So i installed the kodak easy share software, i restarted, pluged in my digicam and i got a pop up that said "looking for drivers" blah blah, then it said failed. i did this 2 times and nothing, i downloaded the vista software for kodak and nothing. so i dont know what it could be. any help? i appreciate it.
 

More replies
Relevance 51.66%

i installed the software and everything, when i connect my cam it says lookin for drivers and then it says failed.

i restarted and everything but nothing works.

any help?

i even got the vista software for it and nothing. ugh !!!!! lol
 

More replies
Relevance 51.25%

I have two photos from about 1910 that are in frames with bubbled glass. I would like to scan the photos without dismantling the frame.

The scan has a rainbow effect covering about 20-25% of the photo.

I have a flat bed Canon Scan 8600F and Adobe Photoshop 4.0.

Is there a trick to placement of the photo on the scanner, or a Editing trick to remove the rainbow?

Thanks!
 

Answer:Solved: scan 100 yr old photo in "bubbled glass" frame

12 more replies
Relevance 50.43%

I can't get my new laptop to recognize my old Kodak 500 Photo Printer as a printer. It shows up as a "device" instead, and so I can't print to it. Has anyone else had this problem and found a fix?

Answer:Kodak Photo Printer not recognized as printer

What driver did you install? There is no Win 7 driver on the Kodak site for your printer but the Vista driver should work. There's also a firmware update that you may need to install but you won't be able to do that until you get the computer to recognize the printer. Kodak Photo Printer 500

2 more replies
Relevance 49.61%

I don't want to install Kodak Easyshare on my computer but I have a Kodak Picture CD that insists I install to view pictures. Is there a way to run but not install? Or can I install to put pictures in "Windows Pictures" and then uninstall? or? Thanks for any advice. NS
 

Answer:run not install kodak easyshare to view kodak CD full of pictures

8 more replies
Relevance 49.2%

I recently downloaded the latest version of Kodak Easy Share on my computer which is a Dell Dimension 2400 XP. I had trouble getting pictures to computer from Camera. I finally figured it out. Now I can not upload pictures from kodak easyshare program to the kodak gallery so I can order the pictures online. It says it is not available at this time and I should check the firewall settings. Before I downloaded the 8.0 version I had no trouble ordering pictures online.
 

More replies
Relevance 49.2%

kodac transfers only no.to the pc from the docking stacion

Answer:kodak c340 not loading pictures to kodak easy

Ask the experts here: http://support.kodak.com/app/intfSe...

2 more replies
Relevance 48.79%

Synopsis: PSU died, replaced PSU with different model, system boots to bios successfully but does not recognize any devices in SATA ports, nor do those devices appear to be getting power. Now can't even get to BIOS, entire PC flicks on and off repeatedly as soon as I turn the PSU on regardless of whether I hit the power button on the front of the computer.

System Specifications

Original PSU that died: SeaSonic M12II 750 SS-750AM 750w PSU
CPU: Intel Core i5-3570K Ivy Bridge 3.4GHz
GPUs: ASUS 670 non-top version, SLI (2x)
MOBO: ASRock Z77 extreme 6
RAM: Mushkin Enhanced Blackline 8GB (2 x 4GB) SDRAM DDR3 2133
Optical drive: Sony AD-7280S-0B 24x SATA Internal DVD+/-RW Drive
SSD: SanDisk Extreme 240GB SATA 6.0 Gb-s 2.5-Inch (OS is installed here)
Storage drive: Western Digital Caviar Black 1 TB SATA III (This was not connected when power supply died)

Detailed explanation:About a week ago my PSU (Seasonic 750w) died randomly while the computer was left running in sleep . I RMA'd the dead seasonic. In the mean time I happened to come accross an extremely good deal on a new PSU, so I bought it (Thermaltake smart m850w PSU) to have a backup and to get my machine working again.

I hooked up the new PSU to GPUs, CPU, fans, ATX power connector, and to all of the SATA devices, (the SSD, the HDD, and the Optical drive). I made sure to connect the data cables to the SATA devices in the same configuration they were in when working properly. The computer boots suc... Read more

Answer:PSU died, new PSU, bios wont recognize SATA devices, now wont turn on

I had a similar problem when I had an Antec PSU die on me. After I replaced it, my Biostar mobo's BIOS would no longer retain settings, and both my Pioneer DVD burners were completely dead. Not recognized in the BIOS, they would not acknowledge any discs inserted, nothing worked. I also started getting BSODs pointing to a corrupt BIOS. Replacing the burners didn't help. Putting the Pioneer burners in a new machine didn't work.

It turned out that the dying Antec PSU had wrecked the Biostar's BIOS chip and both Pioneer DVD burners. Replacing the BIOS chip was more expensive than buying a new motherboard, and reflashing the chip wasn't possible because the flash utility told me I already had the latest BIOS version. I ended up trashing the board and buying an ASRock board and Samsung burners.

If you get a new motherboard (or try another known-good working PC), and you connect your present SATA devices and they don't work, then the dying Seasonic may have burnt them out, too.

9 more replies
Relevance 48.79%

I have a Satellite U400 and its a year and a few months old.

In the last little bit it has been acting up, and it started with when the computer goes to sleep and goes to the black blank screen it will not come back from that.
The only way to do anything is hold in the power key till it turns off and then turning it back on. This brings me to the warning screen I have turned my computer off incorrectly. It has been doings this for a few weeks and started randomly out of the blue.

Then just today it wouldnt turn on at all, I was pressing the power key and the key itself would light up, and on the bottom right hand side the little lights would light up but wouldnt turn on, I kept pressing it over and over and over again and finally it did turn on. Once on I only used it for a few mins before turning off again and then would do the same thing, I kept pressing the bottom till it turned on. Its been on now and hasnt turned off again.

Not to log ago I had to reformat my computer due to me forgeting my password and had locked myself out of the computer. About a week after that is when the issues started. I am not all that computer smart, to be honest, I do understand something things, I can follow step by step to do something.

I really dont want to pay to have it fix I want to just do it myself and soon as its in great shape and never had any issues before.

Does anyone have any idea what this could be, or why it could be?

I am thinking about reformatting again ... Read more

Answer:Satellite U400 wont turn on & when on wont come back from sleep mode

hi aev270,
sounds like a serious problem to me.
try the following: take out battery, cd-rom, hdd and try again.
if it starts up without this components - you got lucky!
this means it probably a software issue (but i dont think so - sorry)
do you see the toshiba logo / bios messages? no - the you are in trouble.
this strange behaviour could depend on many things: defektive components like ram or grafics... or (badest thing) the mainboard...
if you have still warranty on it you should go to a servicepartner having the system checked.

1 more replies
Relevance 48.79%

hi, i have recently updated my microsoft lumia 535 to windows 10.. after about an hour, i have recently explore the features of this update on my phone... then suddenly when my phone screen turns of to lock, it own't turn on again when unlocked. help me with this pls. anyone?

More replies
Relevance 48.79%

Dear all,

I own a satellite A100-383 (PSAARE) that will not restart when the battery is totally empty or if I leave it without the battery overnight. The battery will not charge either and all front panel lights are off. I must have always some charge on my battery and do not leave it unplugged more than 2 days.

If for any reason my battery was totally drained, plugging and unplugging the mains from the wall socket would make all lights turn up and charge the battery again.

Unfortunately I went on holidays and forgot my pc unplugged and it does not charge or turn on.?All front lights are off. Tried my dear old method of plugging in repeatedly with the battery and without it with no luck.. I could see a connection for a second or so but I was not quick enough to plug it back in and they turned off.

I would be so thankful to you all if you could give me some help to turn on my pc. Once I have it back on and charging I will buy a new battery for sure.

I am looking forward to read your advices.

Thank you all in advance!!!!!!!!!!!!

Message was edited by: Soneu
The battery will not charge either and all front panel lights are off, when the battery is completly drained.

Message was edited by: Soneu
Running on Windows 7 32

Answer:Satellite A100-383 wont turn on - battery wont charge

After waiting for several hours and plugging in the computer again, suddenly I saw the line in mains light on but soon faded away. I repeated the procedure and could turn on the pc before the mains light could turn off. I am sending this post from my PC.

I still do not know what may be happening to it but I will try to solve it by buying a new battery and never ever unplugging for long periods my PC.

3 more replies
Relevance 48.79%

OS Windows Vista Basic SP1
Hardware
Intel Pentium Dual Core e2220 processor
2gb ddr2
160 gb 7200 rpm sata hard disk
(13 gb allocated for recovery system)
DVD RW R9
Nvidia GeForce 7050 up to 895mb

Packard Bell Imedia d2317 uk

I give quick summary. Im not at all good with tech knowledge

18mth old pc. Wont boot. But is temporamental. Sometimes will turn on, make noise, and the dvd drive can open. Other times wont even power up or even the odd time i get to the american trends black screen with some commands like f2 for SETUP , f8 bb popup. Also noticed it said checksum bad

My girlfriends pc this is. It happened when she was using farmville. Got the bsod. PC was working really amazingly beforehand like brand new. Very little software, on it, and no music or movie downloads. No file sharing. Satisfactory AVG etc

bsod.!! arrrggh. I noted down what i could from the first one before it restarted automatically.

PAGE_FAULT_IN_NON-PAGED_AREA

down the page after a bit of warning about recent software or hardware installations or missed windows updates.. this technical info

STOP :0x00000050 (0xEE946856,0x00000001,0x81FQ47D5,0x00000002)

collecting data for crash dump .....
initializing disk for crash dump

After autorestart, it done a repair startup which at first looked like working and everything it seemed fine. So i opened firefox browser which reopened the farmville page that had been on at the previous bsod. Well it happened again except this time it froze. After 10mins not... Read more

Answer:Newbie bsod. Wont boot, wont even turn on most times, but does sometimes

If I leave it alone for a few hrs, the system might seem like its going to work, the on switch goes blue lit, theres the normal beep it makes, the three lights on the keyboard flash, then i get packard bell screen for split second which gives me options like enter BIOS, but that scares me. Then it will go straight to the American Trends page i explained earlier and wont go further

Then if you switch power off again and see what happens, it may not even power up next time, no blue lit on, a split second of fan noise then nada. Or it may have nothing happen except you can hear the fan running and the dvd drive can open

Of course she cant find her vista disc!!! We will find it 2moro somewhere though. There is no important data on the pc so if it was possible to reinstall vista I would just leave it in to get fixed. I got quoted 25 pounds.

Can anyone help me out or have any clue. My brother had a problem last month with a firefox update which gave him similair trouble. But lucky for him, it resolved itself after 3 days of turning it on/off and hoping for the best

5 more replies
Relevance 48.79%

Hello, I have a clean installation from iso of  Windows 10 on my laptop.I'm experiencing a problem when I shut down a system. LED on i "letter" on Lenovo logo is flashing but nothing more happens. Then I'm forced to hard shut down by holding power button for a few seconds. Or when I want to wake up computer from sleep mode. nothing happens... Again I have to use hard shut down. I tried to reinstall drivers for graphic, chipset, etc... Also I tried to updated BIOS but it havent helped me. Thanks for advice Best regards Jakub.













Solved!

Go to Solution.

Answer:Thinkpad S440 wont wake up after sleep and wont turn off sometimes

I made video of this problem with shut down...Maybe it will catch someone's attention https://www.youtube.com/watch?v=GGthxky267Y 

3 more replies
Relevance 48.79%

Hi, I have recently recieved my HP Split X2 back from HP last week because the docking station would charge but the computer would not and now it's the opposite. I turned on my computer it was working fine, I plug it in to charge and i notice that the battery icon didnt change to charging so i unplugged it and plugged it back in and nothing so i undock the computer and that charges just fine i place it back and next thing i know it shuts off on me. i press the power button and nothing but when I hold it down the Windows button on the computer stays glowing if i continue to hold the power button and if i undock it the led light is red. Also if i have it plugged it the windows button will flash 4 times and on the 4th time itll stay lit up until i release it I just got my computer back and  it's acting up again i would really appreciate a way to fix this 

Answer:Docking station wont charge computer wont turn on

Hi @daniel9909 ,Thank you for visiting the HP Support Forums and Welcome. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.Thanks.





Please click ?Accept as Solution ? if you feel my post solved your issue, it will help others find the solution.Click the ?Kudos, Thumbs Up" on the bottom left to say ?Thanks? for helping.I work on behalf of HP

2 more replies
Relevance 48.38%

Hi Guys,

I've narrowed down my reserach to 3 cameras (Canon-S1-IS, Kodak-DX-7590, Kodak-DX-7440).....I've searched on internet and these are the cons

Kodak-dx-7440 : Low optical zoom (ok for me)

Kodak-dx-7590 : No image stablization

Canon-S1-IS : very bad Indoor/lowlight focusing, EVF freezes, comes with alkaline batteries, too small LCD, bad focusing overall

Now my requirements are -

1) Family events/parties (mostly outdoor night, low light, low light indoor shots),

2) Sight seeing (mostly daylight shots of monuments, buildings etc, can be night shots too like of Times Square NYC),

I want to use automatic settings and my top priority is to get good shots in a variety of light conditions all at some automatic (without having to fiddle around with the complex settings, although I'll learn them later on). As for the 10x zoom, I'm just considering it for fun right now, but if the cams with zoom don't perform well in low light / bright light conditions in automatic mode then I'll leave them. I'm not planning to buy a tripod or do bird watching or do wild life shooting etc, my shots will be around family events, indoors and sight seeing types mostly.

Please suggest which one of the above 3 cams would be the best for these requirements.

Thanks in advance.
 

Answer:Canon-S1-IS or Kodak-DX-7590 or Kodak-DX-7440

From what you say the 7440 sounds like what you need. The 33mm wide angle is wider than most for including more in the shot. The 4X zoom range is good for most photography if you aren’t into wildlife photography. Flash range is adequate.

Jeff at DCRP said this in his review:
“There's a lot to like about the Kodak EasyShare DX7440 -- heck, I even bought one for my mom. It's easy-to-use, very responsive, full-featured, and expandable to boot. The biggest weakness is on the camera is the image quality -- photos were "muddier" that I like to see, especially on things with fine detail like grass or trees. Don't let this scare you off, though. For people like mom who print at 4 x 6 inches or downsize for e-mailing, these are non-issues. "Pixel inspectors" who view the images on-screen at 100%, or those who print larger than 8 x 10 should probably try another camera. The DX7440's photos have vibrant color (perhaps too much so) and very little redeye, and I can attest that they look great when printed.”

He tests almost every camera that comes out, and if he bought one for his mom it is probably a decent and easy to use camera.
http://www.dcresource.com/reviews/kodak/dx7440-review/
 

1 more replies
Relevance 48.38%

Hi, as in the thread title in a clean install of win 10 and the latest nvidia drivers, my monitor wont turn off after its been idle for X amount of minutes that I set in the power savings page and also the screensaver doesnt start after a set time either.

Does anyone else suffer from this problem and if so is their a fix for it ?

Thanks in advance for any help given as this bug is really annoying me.

EDIT

Getting a little closer to solving it. I was noticing problems in device manager, when I was in DM and selected show hidden devices I noticed a pile of usb devices that said they werent plugged in ??? Anyway I decided to just unplug all usb devices except key board and mouse and bingo within a minute the monitor turns off, which was the time I had set the monitor to go off at, purely for testing purposes, once all other usb devices were unplgged the screen saver and monitor going idle now works, now herein lies the problem, I have a handful of usb wires in my hand and I dont know which one is to blame, maybe more than one is to blame, fuck knows but now atleast I have a start on how to fix this shit.
 

Answer:Monitor wont turn off and screensaver wont work on win 10

My Soundblaster card prevented sleep. Fixed it with this:
http://www.jasonhartman.net/2012/06/windows-7-wont-go-to-sleep-mode-audio.html

I also disabled my NIC from allowing it to wake up the computer as a failsafe.
 

2 more replies
Relevance 48.38%

My computer will not shut completely off when I shut it down. The light for the wireless internet connect does not go black, it turns orange, saying that it is off but now the orange light does not come off unless I hold the power button down.  Also when my computer goes to sleep, when I press a key to turn it back on, it does not turn on. The screen stays black and the wireless internet connection light is orange. It does not boot back up anymore. 

Answer:HP wont shut off all the way and sleep mode wont let me turn...

Hi, Try the following. Open Settings and select System.  Select Power and sleep, then click on Additional power settings - in the following window, click on 'Choose what the power button does' in the left hand pane. In the subsequent window, first click on 'Change settings that are currently unavailable' ( near the top of the Window ) and then remove the checkmark from the box against 'Turn on fast start-up (recommended)'.  Click the Save Settings button, then close any open windows and restart the notebook. When windows has reloaded, download the IMEI driver directly from Intel on the following link, unzip the package and run the installer. https://downloadcenter.intel.com/download/26127/Intel-Management-Engine-Consumer-Driver-for-Intel-NU... When the installation has completed, restart the notebook. When the machine has reloaded, re-enable Fast Start-up and reboot the notebook once again - let Windows fully load for a few minutes before checking. Regards, DP-K

1 more replies
Relevance 47.56%

My Lenovo laptop recently decided to update itself to windows 10.I initially tough i lost all my pictures, but later found out they were located in C:/users/*myname*/pictures. I sighed with relief as they seemd to be intact and open as Intended.Like a month later i was working on resume online and was asked to include a picture of myself. So i went to the afromentoined directory only to find all of my files were turned into shortcuts. All of the shortcuts linked me to F:\*foldername* which i found preculiar given my hdd is named C:i googled arouond and found the attrib -h -r -s /s /d g:\*.* fix, but it kept telling me access denied. I understand this only works for portable drives?I really hope my pictures haven't just vanished anywhere, is there aything i can do to resolve this sitsuation?message edited by Megasatan

Answer:Why did all my photo files turn to shortcuts?

I'm not familiar with Windows 10, but if you look at the properties of the photos, what do you see?Also, are you located in the US? If so, it's not legal for an employer to ask for a photo until after a job offer has been made. :)

2 more replies
Relevance 47.56%

I was wandering around in the option menus of my Windows 8.1 where I had no business being, and I accidentally chose an option which disabled the thumbnails of my jpeg files from showing.   How do I get the Windows to show a thumbnail of the photo
inside my jpeg's, PLEASE ???

More replies
Relevance 47.56%

Preferably a software program that will do it in as few steps as possible & is easy to understand.

Thanks
 

Answer:What program will turn a photo into a comic?

veronica2 said:



Preferably a software program that will do it in as few steps as possible & is easy to understand.

ThanksClick to expand...

Anyone know?
 

1 more replies
Relevance 47.15%

Hi, My laptop was not charge, I was not able to check the percentage of the battery & all of a sudden it shut down. I cant even remember if I shut it down or it shut down on its own, because I went to th rest room.. Few hours later I plugged it in the charger but t seems like it's not charging and then i tried to turn it on but its still not working. I need Help ASAP :-(  

Answer:LAPTOP WONT CHARGE AND WONT TURN ON

It would help if you posted the product number or complete product name. You have only identified the notebook model series that it came from and that is not quite specific enough. Identify it and I will be able to give you instructions on performing a hard reset of your notebook. Is it still in warranty?Check your warranty status Here. Does the power\charge LED light up when a power adapter is connected to it?

1 more replies
Relevance 47.15%

When I send email from my Mac to PC users... my attached jpg photo files turn into MIME files and PC users cannot see pics.

I am using Internet Explorer 5.1 for MAC... and Outlook Express. Mac OS 9.2.

How can I send them without this auto MIME file translation?

Help. Thanks
 

More replies
Relevance 47.15%

 I got hp z600 and i got geforce gtx 1070, I bought a power adapter 6 pin to 8 pin. I have the issue the PC will turn on and works fine but when i power it off and want to turn it on again it wont turn on at all. I have to unplug it and hold the reset button for few seconds then I plug it back again and it turns on. No it seems it is dead 100%. What can it be? too much power consumption from the video card? I got other hp z600 with gtx 1050 no external power required and it works great. Any suggestion? Thanks

More replies
Relevance 47.15%

I was playing counter strike then all of a sudden the screen went blank then the fans started to make loads of noise so i turned it off and now when i turn it on the fans start the dials move and light up but it makes some beeps then nothing happens just the fans spining, its happened before and i sent it back and they put a new motherborad in but the company has gone bankrupt so carnt send it back is there any way i can tell for sure its the motherborad and help choseing a new one??.

Answer:computer turn wont turn on

1) Punctuation.2) More info on your system, OS and what happened prior to this and someone will be along shortly to assist.

14 more replies
Relevance 46.74%

Hi, I have Vista and my version of Windows Media Player will not allow me to view my .wmv files frame by frame which I really need to know. Can anybody suggest a media player that will enable this facility?

thank you for any ideas

Answer:Media player that will let me view frame by frame?

VLC: http://www.videolan.org/vlc/

Use the button that I have circled in my screenshot (click on thumbnail at base of post) to slow the playback down.

Regards,
Reventon

4 more replies
Relevance 46.74%

This is really stupid, I just want to watch an animation video file to see how they did it, movement wise and it's in Divx format but Quicktime claims it doesn't have the Divx codec (I'm on Windows XP and all the other programs work correctly with Divx) Is there, either a way of installing Divx for Quicktime or another program which will allow me to watch an animation frame by frame without putting it into an editior like After effects. I mean I thought Media Player would have had this build into it, it's not like cutting edge tech. or something.

Thanks in advance for all help.
 

Answer:Frame by Frame video program like Quicktime

Windows Media Player is not the thing to expect features from. Pretty much every decent video player supports frame by frame. Try BSPlayer or Micro DVD player or Virtual Dub for example. You may not be able to watch the movie frame by frame even with a more advanced player and you will need a video editor. I think it's the encoding style of some codecs.
 

1 more replies
Relevance 46.74%

I would go onto my computer and after a few seconds everything would freeze. I couldn't close the program I was in or open a new one. Having tried numerous times I decided to reinstall XP from the company CD given to me by the company I bought the computer from. I did this. The computer is now exceptionally slow and the screen seems to scroll downwards in slow motion, as if frame by frame. On restarting the computer this happens and the dark screen gradually becomes lighter and eventually becomes light blue. I am told I might have be a problem in Device Manager, but I haven't a clue to be honest. The mouse indicator moves about - not too badly, but everything is so slow. This is the same in Safe Mode. Please help.

Answer:Reinstalled Xp Very Slow Moves Frame By Frame

Did you also reinstall all of your device drivers? Find your machine make and model on the web and download all the drivers. Then install them.

1 more replies
Relevance 46.74%

Can I do frame by frame in Media Player Classic?
 

More replies