Computer Support Forum

Problem with Intellipoint Wireless Laser Mouse 6000 v2.0

Question: Problem with Intellipoint Wireless Laser Mouse 6000 v2.0

Hey, I recently bought a Wireless Laser Mouse 6000 v2, and when I put the install CD in, it says it is not compatible with my version of windows which is Windows 7. So I went online to look for the software on Microsofts website, and I found it. So everything installed ok, and the mouse was working. Only problem is whenever I try to open the Control Panel for the mouse, to change my buttons or something, nothing happens. It shows a loading cursor and than stops. I've tried reinstalling the program, and I dunno whats wrong. Thanks.

Relevance 100%
Preferred Solution: Problem with Intellipoint Wireless Laser Mouse 6000 v2.0

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Problem with Intellipoint Wireless Laser Mouse 6000 v2.0

why isn't anyone replying?

3 more replies
Relevance 104.14%

I am having problems with installing this mouse on Windows XP. I tried all the suggestions mentioned above by DAI and while the computer recognizes the new hardware, the mouse does not work.

My husband got it to work for a bit, but it stopped working again. Can anyone help me?

Thanks!

Answer:Natural Wireless Laser Mouse 6000

check the batteries are ok
reinstall the drivers
reset the mouse with on the mouse reset button on the bottom of the mouse and on the receiver

2 more replies
Relevance 104.14%

Hoping this is a simple fix.....
the scrolling on my mouse is choppy, when I scroll an IE page it has like a delay? Its not a smooth scroll. I have been all over my manual and support for it and cannot find anything that will change this. The settings offer up slow-fast options but it only causes the page to flip faster or slower duh lol sorry I am at a loss as to how to describe this. Let me know if I can tell you anything that would be of help.
 

Answer:MFST wireless laser mouse 6000

No one familiar? I have been digging but cannot find a solution. This really seems to be a simple fix with-in the controls but there is not any option that corrects this. You scroll and the page moves with a delay and a line as if going page by page. I had first thought it was a setting within IE but it also does this in notebook and other software programs. Even sliding the sidebar vs. scroll is choppy. Any suggestion would be nice thank you.
 

1 more replies
Relevance 104.14%

New Years Greetings!
I have an HP Pavilion dv6000 (March 2007) with Vista.

I just installed the Natural Wireless Laser Mouse 6000...several times in fact!
First time it worked. Then after rebooting, it came up with a message with 3 choices:
- install driver (had already done that)
- don't ask again
- (I forget what this said)
So I said "don't ask again" and that's when the mouse went dead! Argh!
After uninstalling and installing from the disk TWICE, (pressing all the correct buttons on the transmitter and mouse and unconnecting the USB before this)
I finally downloaded the driver from online just in case it was the driver that came on the disc. It is Driver Version 6.20.173.0
Finally got it to work, HOURS LATER! but not on my mouse USB port which is the PS/2 Port that says IRQ 0x0000000C (12)

I had to move the USB connector to another port.
I spent [email protected]! trying to install and uninstall this and am coming to the conclusion that VISTA is the problem. Am I right?
I went to all the help features and did all the right things.
Device Manager says this new mouse is there. Says it is working properly.
But then nothing happened until I moved it to another port.
I would like to plug the USB into the normal mouse port. But it probably won't work. Why?
Am seriously considering a Mac for the first time since I started using a computer in 1980s! Thanks for any and all suggestions. Cheers!

Answer:Natural Wireless Laser Mouse 6000

use an adaptor
http://www.clickykeyboards.com/index...id/0/id/179740
http://www.tigerdirect.com/applicati...MP=OTC-BIZRATE

8 more replies
Relevance 101.68%

Hi everyone,

Hoping someone has some suggestions for my new problem.

The problem:

My new Microsoft Wireless Laser Mouse 6000 installs on my laptop the way any normal mouse should. I have since decided to use this new mouse on my desktop PC instead, which was successfully using a wired mouse. When plugging the new mouse in, the New Hardware Wizard could not install the mouse. On top of all this, when I reverted back to my old "wired" mouse, the wizard could not install this mouth either. Something has gone wrong and now I can't install any mice. I have tried all three mice that I own, and it seems that my computer is just having trouble installing mice in general. All the mice install fine on other computer.

Behaviour:
-wizard says, "cannot install this hardware"
-mouse is listed in DEVICE MANAGER as "other device" with a yellow exclamation mark
-pointer arrow remains in the middle of screen, mouse doesn't work to move it around.
-USB ports work fine for my other USB devices. I've tried them all
-Microsoft Intellipoint software is up to date, installed and seemingly ok when I open it in control panel

Already done:
-tried replacing DRIVER.CAB from WinXP installation disc
-tried uninstalling the mouse in DEVICE MANAGER, unistalling Intellipoint, and starting the whole process over again.
-tried changing channels from the mouse to the receiver, but that isn't relevant to the problem anyways since I know the mouse w... Read more

Answer:Wireless Laser Mouse 6000 refuses to install... looking for suggestions.

Have you tried system restore?
 

1 more replies
Relevance 87.33%

Hi,

I just bought a Microsoft laser mouse 6000 from Newegg (specs here). I'm trying to get the back and forward buttons working in Ubuntu 7.04 (Feisty). I did some modifications to configuration files as suggested by Google search results. Unfortunately, that screwed it up so that the scroll wheel controls back and forward, and the real back and forward buttons don't work at all.

The imwheelrc config file (/etc/X11/imwheel/imwheelrc) says that the xf86config file needs to allow for enough mouse buttons. But locating xf86config in the terminal returns nothing.

What can I do??
 

Answer:Microsoft Laser Mouse 6000 on Ubuntu 7.04

...bump...
 

1 more replies
Relevance 86.1%

I originally had a Logitech optical mouse, but lost the usb mini receiver. (btw can i get a new one anywhere?)

So i bought a microsoft wireless laser mouse 6000, and it worked great. Then one day, in the middle of a game, it just stopped working. The device manager says all things are good, yet it still wont respond. The green light is not flashing, is on, and when i try to reset the connection on both the mouse and receiver, it never resolves the issue.

Is there anything i can do?
 

Answer:Microsoft Laser mouse 6000 wont respond :(

6 more replies
Relevance 84.46%

I have one around 6 moths old. Recently it started sticking. Not just where my wife spilt something on the keys (she said she didn't but, you know....) but also the spacebar, backspace keys too. I often have to hit them three times before they type.

Are these things safely cleanable? Or should I just dump it and get another (keyboard, that is ; not wife,. Mind you...........)

bob
 

More replies
Relevance 82.82%

Hello all-

I bought this wireless bundle awhile ago from woot.com (woot link here, MS link here) and I'm trying to install it on my laptop.

So far it's a no go - I'm not getting any response out of either unit. I'm using a Dell Latitude D610 connected to a dock at work so I can use my monitor. The mouse connector on the wireless receiver goes to a USB connection, the keyboard connector goes to the older, standard purple connector on the dock.

When I plug the receiver in it turns on and it went through the add new hardware balloons in the system tray. When I try to turn the mouse or keyboard on, though, nothing seems to happen. I hit the connect button on the receiver, then on the mouse/keyboard and I don't seem to get any response. I installed the software for each device from the MS link posted above, turned the computer off, plugged the receiver in, rebooted and it still wouldn't work.

I'm using XP Pro SP2, everything else is pretty standard except for the fact that I'm using a docking station - could the dock be causing the problem? I tried installing the mouse when undocked (my laptop doesn't have the keyboard connection) but it still didn't work so I don't know if that's the issue.

Any suggestions or pointers? I'd really like to use this new combo instead my the crappy keyboard/mouse I'm on now. Any help is greatly appreciated!
 

Answer:MS Wireless Laser 6000 Desktop Bundle not working

Bump....

anybody have any clues?
 

1 more replies
Relevance 81.59%

I bought a new wireless internet keyboard and laser mouse yesterday but when i install the software in the computer only the wireless keyboard works but not the wireless laser mouse.....when I install software I leave the other mouse in to control everything...do you think it is because of that...but if I dont leave the other mouse in how am I going to control things to install software....Could Somebody Please help
 

More replies
Relevance 80.77%

I just received an MX3200 keyboard/MX600 mouse combination and installed it on my Vista 32 machine. (I had previously used a no-name wireless combo that ultimately wore out.) I installed the latest Logitech drivers, made sure batteries were fresh, that it was properly connected. However, the mouse is not behaving properly. It acts like a regular roller ball mouse does when the ball is jammed or on the wrong surface--the cursor doesn't track the mouse motions. I have to repeatedly swipe the mouse on the pad to just get it to move a little. In fact, I had to turn my pad over (i have a stiff pad designed for laser/optical mice) to get even lousy responsiveness. I've tried the mouse on soft pads, on the table, on a piece of white paper, to no avail. I made sure the BIOS enabled USB mice. I"ve checked control panel settings, the logitech utility, but nothing there improves the situation. Any advice?

(I used my wired mouse to create this note).
 

More replies
Relevance 80.36%

As mentioned in the title, I've got a Microsoft Wireless Laser Keyboard 6000 v2.0.
I want to assign a string of 14 characters (13 digits + 1 carriage return) to one of the 5 favorites buttons.
I wasn't able to find any direct of indrect way, so any help is welcome. Thanks in advance.

More replies
Relevance 78.72%

cannot re-install this mouse because of error c:\windows\temp\_is85\1033.mst file is missing.
 

Answer:intellipoint wireless optical mouse blue

Hiya

Try using the latest drivers, as they're probably out of date by now anyway:

Windows XP and 2000:

http://www.microsoft.com/downloads/...63-2f8a-4339-9542-18f90b69128d&DisplayLang=en

Windows Me, 98 and NT 4:

http://www.microsoft.com/downloads/...2a-61be-4072-abe2-e3fc3aa0eee6&DisplayLang=en

Regards

eddie
 

1 more replies
Relevance 75.03%

Hello, I am having a slight problem with my Intellipoint optical 5 button mouse.
Just about every time I left click one single click, it double clicks.
I have the latest drivers and I have cleaned it thoroughly, some other people I know are having the same problem with this mouse. (this is not the cordless
mouse)
Any thoughts??
 

Answer:Intellipoint mouse problem

7 more replies
Relevance 74.21%

When I'm using the mouse, the pointer will suddenly fly across the screen. This is really anoying when trying to do delicate art work and such like. I've checked the settings to make sure they were correct, especially to check that the "snap to" was not checked and everything looks OK. I also tried un-installing and re-installing it, making sure I had the latest drivers but this made no difference. This has been going on for quite a while now and I have searched in vain for a solution. If anyone has any ideas, I would be most grateful to hear from you.

Cheers.

Si


Pentium III 933MHz
Windows Me
Abit BX133-RAID Motherboard
ASUS V8200 GeForce 3
512 MB Ram
SB Live Value
Direct X 8.1
 

Answer:Intellipoint Explorer Mouse Problem

Does your mousing surface(mouse pad) have reflective properties(is it shiny)? Reflective surfaces are bad to cause this problem, I had to get rid of my mouse pad because it had a glossy shine and would send the pointer all over the place.
 

7 more replies
Relevance 74.21%

For no reason that I can think of I have got a message window displayed telling me that Microsoft IntelliPoint has encountered a problem and needs to close. We are sorry etc. I have sent the report to microsoft but cannot get rid of the window. I have delted the mouse and restarted and changed the batteries but I still get the message displayed on top of everything. How do I get rid of it?

Answer:Microsoft IntelliPoint mouse problem

System Restore?

10 more replies
Relevance 72.57%

Yesterday I bought a Wireless Internet Keyboard And Wireless Laser Mouse from the Brand:Micro Innovations and I did everything it said but when im about to install the software I leave the non wireless mouse that I used to have plugged in to install the software... so I install it and the wireless keyboard works great but the wireless laser mouse doesnt work... any suggestions....PLEASE HELP
 

More replies
Relevance 72.57%

I had to replace my keyboard after 3 1/2 yrs since the keys were sticking and the letters worn off. I bought the Microsoft Wireless Laser 6000 Mouse with the wireless keyboard. It works great with one problem. If I enable "allow this device to bring computer out of Standby" for either the mouse or the keyboard, the computer never goes into a full standby. The fan is always running and so are some other parts of the computer. If I dont configure the mouse or keyboard that way, the computer will go into regular and complete standby but will need to be turned on with the power button to bring it out of standby. The Receiver is USB so Im thinking the reason the computer doesnt completly power down is due to the receiver needing to be active. Is there a work around or do I just stick with using the power button?
 

Answer:Microsoft Wireless Laser Mouse and Wireless Comfort Keyboard

I'd stick with using the power button
 

1 more replies
Relevance 71.75%

Is it unusual for a 3 month old wireless mouse to quit working?

I tried three different batteries and the light on the bottom still doesn't light up.

We hooked my son's mouse up and it works so I know it is not the pc.

I have already purchased another one as I didn't feel like going through the trouble of trying to return it to MS all for $39.99.
 

Answer:Microsoft 6000 Wireless Mouse

9 more replies
Relevance 71.75%

Hello, I have a MS Wireless Comfort Keyboard and Mouse 6000 and have the Intellipoint and Intellitype 6.1 software for them. The keyboard and mouse lately have been acting squirrelly, for instance, when I hold down 'w' in a game to move forward, it will stop and I have to release and repress. The mouse is also acting a little jumpy. It felt like the batteries were running low so I checked the two programs above to look at the battery indicators and surprisingly, they were both 'good' and fully green. I have had those batteries installed for at least 3 months. I changed the batteries anyways to see if it made a difference. They didn't. In fact, when I took out the batteries altogether, they battery indicator still read full. Has anyone heard of the program not updating itself? The issue is new and yes, I have played the game for months now without the issue. Thanks guys!!
 

Answer:MS Wireless Keyboard and Mouse 6000

Try to uninstall and reinstall your mouse/keyboard drivers and software.
 

1 more replies
Relevance 70.93%

I believe I'm having some sort of signal problem with my wireless mouse. I play an online game in which you can hold down the right mouse button to look around. Occasionally it will get locked like that, and I have to click the button for it to fix itself.

I surmise that for whatever reason, I click and hold down the button, but when I release it, it is not registering that I have done so, so it just acts as if I am still holding the mouse button down. Clicking it once gets the signal sent that I have released it.

My friend reports having the same problem with his wireless mouse, yet far less frequently.

I've always had little annoying problems like this with wireless mice, and I'm beginning to think they are inferior in overall design to something much less complicated, like a wired mouse. Does anyone know what my problem might be?
 

Answer:Problems With Wireless Laser Mouse

Well, the connection between a wireless mouse and its receiver occasionally drops, sometimes for a millisecond or so, sometimes for longer. In your case... It'd seem a bit odd for it to only do that kind of errors.. Anyways, if you want to get rid of this problem, start by testing with a decent wired mouse... The wire is always there, whereas the wireless link isn't.
 

1 more replies
Relevance 70.93%

Several minutes, and sometimes less, after boot-up, the mouse becomes erratic, sometimes coming to a complete halt. Thinking it was either the interference of an outside signal or a build-up of static electricity, I have tried several things, including 1) rebooting, 2) disconnecting the power sources, 3) moving my external hard drive away from the mouse, 4) using different keypads to limit potential static build-up, 5) moving my entire system to a somewhat different location (fortunately, it's all on wheels) -- absolutely none of this works! Disconnecting the main power source and reconnecting it solves the problem sometimes, but only temporarily.

Has anyone had similar experiences? Its an MX™ Revolution

The world’s most advanced mouse.

Highlights: Cordless, Hyper-Fast Scrolling, Laser Sensor, MicroGear™ Scroll Wheel, One-Touch Search
 

Answer:Logitech Wireless Laser Mouse

6 more replies
Relevance 70.93%

My hp wirless laser comfort mouse scrolls horizontally and vertically but exhibits strange behavior. By strange I mean the pointer does not respond when it hovers over minimize, maximize or exit buttons on opened windows of applications. Also, when I remove it, this behavior persists in my laptop using its touchpad and so I have to reboot and omit the use of the comfort mouse entirely. What causes this?

More replies
Relevance 70.93%

Just installed software and driver forWireless Laser Comfort Mouse - Product Number XA965AA#Abb When I go to the HP Mouse Control Center it says "No device found" All the basic functions of the mouse work, left / right clicks and scroll but i can not configure any of the other buttons. I've look up the support for this mouse on the hp site and it's was less than helpful, only gave me the chance to download a quick start up leaflet, very useful! Any help anyone?????????

Answer:Wireless Laser Comfort Mouse

Just purchased the same mouse, installed on HP PC running windows 7 as per instructions but am having same issue. Have you had any joy rectifying?

9 more replies
Relevance 70.11%

As title. This mouse is still available in the official HP store Uruguay in two versions (HP# LB423AA, HP# LB425AA) but I have not been able to find it anymore in Europe. Any advice on a place where this can still be purchased would be very appreciated!

More replies
Relevance 70.11%

Hi People, very simple question. Maybe I could get an answer to my question that I should had asked when I was buying. This wireless mouse uses two "AA" batteries or rechargeable batteries. Question: What about turning it off for the night or whenever I leave my computer? So that I don?t change them every two-three days. Thank you for your help with such a stupid question.

Answer:Microsoft Wireless Laser Mouse 5000

The mouse should go into a low power mode so it doesn't use that much battery power.

7 more replies
Relevance 70.11%

I am considering purchasing the Microsoft Wireless Laser Mouse 7000 as the Logitech MX Revolution I have had replaced twice since I initially purchased it in Feb 2008 has developed the same fault again, i.e. The Freespin wheel has begun to wear out and as such intermittently the Freespin feature stops working, the last MX Revolution suffered the same fault and eventually the fault got worse. Very disappointed as otherwise I find the mouse to be goodAnyway that's beside the point:I was wondering if anyone uses the Microsoft Wireless Laser Mouse 7000, and the Intellipoint V6.2 software and could tell me if it is possible to set the mouse up with the Intellipoint software to allow the two buttons where your thumb goes to go back and forward a page on IE7 & Firefox?

Answer:Microsoft Wireless Laser Mouse 7000

I think you will find the software is upto v6.3 well thats what im using at this time with a 5000 and yes the buttons can be configured.The two buttons on the left side (thumbside) have been set to lower button (magnifier) top button (Back button)

8 more replies
Relevance 70.11%

Hi

I am new to this forum and please forgive me if i didn't do something by the rules.
Here is my problem, i'll try to be as concise as possible.

Just yesterday i bought Wireless Keyboard/Mouse (laser) combo from Sweex (product code KB225US).

After two hrs of work the mouse pointer stopped responding. This happened after i rebooted my machine because of system freeze while playing with keyboard costumisation and copying files into the external HDD . I recall killing two or three processes, don't remember which one.
Receiver works ok on whichever USB port i put it into.
Mouse buttons work ok
Keyboard works ok
Pointer reacts (a little) only when exposed to direct light.
Batteries are new

Went back to the store this morning for replacement but it worked fine on their newer comps that were for sale. But same problem occurred with two older comps at work this evening.

My actions wereSwitched USB ports several times
Swithced off WiFi/ changed channel (to prevent interference)
Driver uninstall/reinstall several times (from CD/website)
Mouse uninstall/install (device manager)
Uninstall Wacom Intuos3 Ddriver

Nothing worked

I am willing to fight to the death for this mouse
Please help me. Should i go safe mode or registry or whatever? Just don't tell me to format, i have so many softwares installed. However, no other mouse software.

Specs:
WinXP Pro
Version 2002
SP2
AMD Athlon 64x2

Thanks in advance

More replies
Relevance 70.11%

Hi all,

I recently bought a Trust MI-7770C laser mouse and I installed the drivers and everything worked fine.

A few days ago I ran Malwarebytes and Spybot S&D and now the mouse doesn't work.

I've tried restarting, uninstalling and reinstalling the drivers, but nothing works.

Any ideas?

Thanks
 

Answer:Trust MI-7770C Wireless Laser Mouse

Does the mouse light up, show up in the device manager?
 

3 more replies
Relevance 69.29%

Hello all,

I am having an issue here and I am not quite sure how to resolve it. I have a Microsoft Wireless Laser Mouse 8000 and I also have a wireless home network using a D-Link WBR-2310 wireless router. I am using Windows Vista, and when I am using the mouse with my computer and the wireless network enabled the mouse pointer moves very erratically and does not move smoothly at all. The computer is plugged in directly into the router with an ethernet cable, it is not using a wireless NIC card.

I am fairly certain this is from interference from the wireless router, i have tried different channels to see if I would get less interference but none of that seems to help any. There does not seem to be any settings for my mouse where i can choose what channel it is running on, it runs on Bluetooth. The wireless router is running 802.11g and as far as I know, this and Bluetooth both run at 2.4ghz.

Any ideas/suggestions?
 

More replies
Relevance 69.29%

Hello,

http://www.amazon.co.uk/Logitech-620-Wireless-Laser-Mouse/dp/B000QRI270

I have one of these and every so often it the mouse pointer sticks for several seconds which is annoying when gaming etc. I've only had it a few months of which its been for the last 2 to 3.

I haven't got the software installed as I see no reason why it would prevent it sticking + sucks up system resources.

It does it both on my desk which is a plastic surface with a bubbly effect and a mouse mat, both clean.

Is there anything else which could be causing this or is it just due to wireless-ness?

Thanks!
 

More replies
Relevance 69.29%

Hi,
I ordered a new MS wireless laser mouse 5000 because after several yrs my old one went bad. Well, I have retained the MS wireless comfort keyboard 4000. Now, when I try to install software through CD MS intellipoint 6.3, I essentially have the following
msg.:  I'm told that that this cd is blocked because it is not compatible w/ windows 7. Another problem is that with the new mouse I can not type anything. This, of course, could be the result of not being able to install the CD that came w/ the mouse.
Now, I've tried about everything---all the downloads which  I could find, and apparently, I'm current w/ the software/drivers.  I just don't know what next to do; I'm not very experienced w/ these things.
Does anyone have any answers; those laser mice are expensive.
Thanks.
Stan

More replies
Relevance 69.29%

I'm used to periodic lapses when Windows forgets that I have a Bluetooth mouse & keyboard but today's behaviour was really weird.
Fortunately I keep a wired mouse and keyboard strategically hidden just in case.

I just booted into W7 and noticed on the log-on screen that the mouse was behaving erratically - would judder around the screen rather than glide.

Anyway I uninstalled it once I'd booted up and went to reinstall it. It worked but Windows asked for a restart. This had never ever happened before. It even asked for the WEI to be refreshed! I've checked and I can't see anything different driver-wise. I've gone through the motions of uninstalling/reinstalling mouse and keyboard dozens of times but never had this happen.

Comments anyone?

Answer:W7 Bizarre Behaviour w/Wireless Laser Mouse 8000

Have you updated anything lately? How about installing anything new?

Perhaps your mouse is running low on batteries?

~Lordbob

9 more replies
Relevance 69.29%

Hi,
I ordered a new MS wireless laser mouse 5000 because after several yrs my old one went bad. Well, I have retained the MS wireless comfort keyboard 4000. Now, when I try to install software through CD MS intellipoint 6.3, I essentially have the following
msg.:  I'm told that that this cd is blocked because it is not compatible w/ windows 7. Another problem is that with the new mouse I can not type anything. This, of course, could be the result of not being able to install the CD that came w/ the mouse.
Now, I've tried about everything---all the downloads which  I could find, and apparently, I'm current w/ the software/drivers.  I just don't know what next to do; I'm not very experienced w/ these things.
Does anyone have any answers; those laser mice are expensive.
Thanks.
Stan

More replies
Relevance 68.88%

Hope I don't have to buy a new set right now, but I gotta do what I gotta do.

I am a huge fan of the right-click function of the mouse.

Yesterday morning, it was working fine, but later in the day the right-click action quit working. No response at all. The left button, wheel, and other buttons are working fine. I use the right button a lot, did I say A LOT? Mainly for cut-and-paste (at least it was, yesterday.)
Keyboard is working fine, also. Batteries are good. Signal is good. I suspect I wore the little guy out.

Suggestions? or, recommendations for replacement. I like the "comfort keyboard" in this set. The curvature is not as pronounced as the earlier Microsoft Natural keyboards. Not split in the middle.

Thanks for listening to me whine. BTW, running Windows XP Home, in case that matters.
 

More replies
Relevance 68.47%

So I'm currently having an issue with my Wireless Laser 8000 (Bluetooth) and hoping someone here might have some insight on it as my googlefu is not getting any results and I really don't want to replace the mouse as I'm using it in combo with the Wireless Entertainment Desktop 8000 keyboard and pretty much love this setup right now.

As of late my mouse has decided to basically throw itself in to sleep mode after about 3-5 seconds of no activity. This doesn't happen all the time but it's getting kind of insane as bringing it out of sleep causes some serious mouse lag and/or quite a bit of moving or a click to reactivate it.

Anyone with this mouse ever run in to a problem like this or in general? The keyboard isn't running in to any issues in regards to losing signal and/or sleeping and not kicking in right.

Unfortunately the Wireless Laser 8000 has been discontinued so I can't even get a proper replacement for it and have to get one of the new bluetrack mice, but none of them are rechargeable .

Any help would be appreciated.

Answer:Wireless Laser 8000 - Mouse sleeps after a couple of seconds

Frist thing comes to mind for me is; have you checked the battery status to see if it needs replaced. On rechargable batteries, there is a set number of recharges it can have and they do go bad from time to time. I would start there first, replace the battery. Here's a link to the mouse if you have not already checked it out.

Wireless Laser Mouse 8000

4 more replies
Relevance 68.47%

formatted to no avail trying to solve this problem and found out unplugging this from the USB port made the Screensaver and all come on.

but I have yet to find a fix for it when it is plugged in, the HID Filter or whatever update did not fix this issue, if nothing else was probably responsible for it more then anything.

I even went into device manager power settings to disable them to wake up the computer and it didnt fix the problem either.

anyone got any ideas?

Answer:Screensaver dont come on with MS Wireless laser Mouse and Keyboard 5000

You could try taking the mouse batteries out. This will rule out that it is making tiny detections of movement even if unintended, while away. If the screensaver comes on, then you know it's doing this. Then, you can try lowering the dpi it uses, if it has that ability. Basically, test it out like this for a minute.

1 more replies
Relevance 68.47%

I cannot get the Print Screen Function to work on the MS Laser Desktop Keyboard. Sometimes I just want to print the screen e.g. to print a list of folders in Explorer, but the key seem to do nothing at all. Am I missing something?

More replies
Relevance 67.65%

I have just bought the above and tried to install on Vista using the CD. I was led to the MS site to download the vista software which has installed the keyboard fine but the mouse is not responding at all, so I am now using a wireless laser keyboard which is brill! and have to use the old PS2 mouse. Any ideas thanks because I like the look and feel of the mouse and would like to use it.Dick

Answer:Installation - MS Laser Desktop 6000

Which plugs into your ps2 or usb ports have a button on it (the mouse should have one too) Pressing the button on the sender, and then on the mouse and keyboard should connect them. If not and as you say the keyboard is working, suspect flat batteries in the mouse or a faulty unit.

1 more replies
Relevance 66.01%

I recently purchased a Logitech Laser mouse and I noticed if I'm on the internet for awhile when I go to use the right mouse bottom to save a file I get a error 8007ffff message.
I have Windows XP with service pack 2 and never ever had this problem with any other mouse before. The only way that I see to fix the problem is to shut down my browser and open back up again(I use Internet Explorer 6.0.) Is there an easy way to fix this problem????
 

Answer:Laser Mouse Problem

There are many and varied reasons for this error in IE, it has been around since Windows 95 and in all versions since, but I don't think your Logitech mouse is one of the reasons at all.

One common reason involves the Google Toolbar, if you have it installed then uninstall and reinstall it again.

Also clear out your Temporary Internet files.
 

3 more replies
Relevance 65.6%

Hi all!
I have a cordless laser mouse that has decided to act up. Sometimes it won't let me drag items across the screen - it seems to disengage itself. Occasionally, it acts as though it has been clicked twice instead of once. It even ignores clicks! I have changed batteries multiple times, and used compressed air on the bottom. Does anyone have any suggestions? Thanks!
 

Answer:Problem with my cordless laser mouse

how far is it from the reciever? Are there any obstacles in the way (like a desk)?
 

3 more replies
Relevance 63.96%

I have bought a Hama M1130( I think it's similar to the M580 model ) Laser Mouse and after installing the mouse driver,from the disc that came with it and from Hama website, several times my mouse buttons 6 and 7 are not working although I tried mapping them to all the possible items from the list. Here is a picture of the mouse : http://ecx.images-amazon.com/images/I/41oUoOrTl6L._SL210_.jpg and here is a picture of the installed mouse driver: http://img27.imageshack.us/img27/84/moused.jpg.My PC configuration is:Processor: AMX x4 935Motherboard: ASUS - M4A78LT-MRAM : 4 GB DDR3Operating systems: Windows 7 and Windows Xp ( I've tried the mouse on both and still nothing).Any help would be appreciated.Thanks.

More replies
Relevance 63.55%

So I got a G9 laser mouse yesterday and now I have a weird problem with Windows XP standby mode. Before my new mouse I was able to put my computer to sleep with standby mode, now when I do standby mode, everything seems to shut off except for the Power Supply. Is the G9 laser mouse software interfering with the standby process of win XP? Please help, thanks.

Answer:Strange problem involving G9 Laser mouse and Win XP standby mode

Yes i would believe so. I think there is some activity or something going on with the mouse that is preventing it from going into standby cause the system is detecting activity of some sort.

Have you tried to just unplug the mouse? Will it go into standby then?

6 more replies
Relevance 63.55%

Hi,

I've got a Logitech diNovo Media Desktop Laser bluetooth keyboard & mouse set - but its not working properly with my PC.
The mouse is uncontrollable - it will be fine for a few minutes then it will assume a mind of its own. It always seems to run a second or 2 behind my actual movements, which renders it unuseable!! The keyboard is the same, but its not so much of a problem as the mouse. It seems that its a problem with a delayed signal or something.

I have tried it with other PC's and it has been fine. It worked fine for me in work & I also tried a laptop in the same location as my PC - with no problems.

There are no other wireless or bluetooth equipment in the immediate vicinity.

I have tried reinstalling windows to see if that made any difference, but no...its exactly the same - Im running XP SP2.

I really dont know what else to do ?

Cheers all.
 

Answer:Problem with Logitech diNovo Media Desktop Laser Mouse

8 more replies
Relevance 63.14%

I'm trying to install Microsoft IntelliPoint software on a laptop to work with an Microsoft IntelliPoint Optical mouse. During the install, I'm prompted to point to the location of the files i8042prt.sys and mouhid.sys. They're located in C:\Windows\System32\Drivers. If I point to that location, I get the message, "The software you are installing for this hardware: Microsoft PS/2 Port Mouse (IntelliPoint) has not passed Windows Logo testing to verify its compatibility with Windows XP."

First, the mouse is connected through the USB port. This laptop doesn't even has a PS/2 port. Second, I know the software and subsequent drivers are signed because it installs fine on another computer, and I am not prompted to point to these files.

The computer is running Windows XP Pro. I've verified that the versions of the two files are the same on both the laptop and the other computer (on which it installs fine).

The software appears to install and function correctly after jumping through all these hoops, but then I experience various other USB-related problems on the computer. The root of the problem appears to be the Microsoft IntelliPoint software. If that's not installed, I don't experience any other USB problems. There are no viruses or spyware on the machine.

Any ideas on what's going on here?
 

Answer:IntelliPoint Mouse Software

9 more replies
Relevance 63.14%

Hi, I have an optical mouse which seems to be working ok but after reinstalling windows I am unable to install the setup programe from the Itellipoint install disk so I can assign different functions for the mouse. It starts it's setup, then stops, showing an error "unble to locate file ( shows different file each time ) in windows temp folder. Can anyone help pleace? system - Win98se

Answer:Intellipoint optical mouse

Good evening skell, just in case you have a damaged / corrupted install disc, may I suggest that you download the latest version of intellipoint from microsoft. If this fails to install, we can investigate the problem further. But a fresh download is probably the easiest starting point.Regards, Mr. Mouse.

6 more replies
Relevance 63.14%

Everytime I re-boot my computer, the mouse stops working until I crawl behind the tower, pull the plug on the mouse and re-insert it; then, everything is fine until the next time!?I have loaded and re-loaded the driver disc and it has no effect, it still refuses to recognize the mouse until I pull the plug.Puzzled and thanks,HankG

Answer:Intellipoint Optical mouse

PS/2 or USB mouse?

2 more replies
Relevance 63.14%

Microsoft IntelliPoint 5.0[MOUSE] -------------------------------------------------------------------------------- PLEASE NOTE THIS IS A NEW RELEASE OF DRIVERS FOR THE CURRENT RANGE OF MICROSOFT MOUSE IntelliPoint software gives your Microsoft® mouse full functionality and lets you customize the mouse to fit your needs. For example, you can: - Reassign each of the mouse buttons, including the wheel button, to perform a command or keyboard shortcut. - Modify the mouse settings, such as the pointer speed or wheel scrolling rate. FOR FURTHER INFO AND TO DOWNLOAD THE DRIVERS click here _________________ For the latest in Virus Signature Updates click here ZEN" BROADBAND AT IT"S BEST

More replies
Relevance 63.14%

Do you know if the above can be used with Vista Home premium and if so how do i do it because it is saying that it is not compatible with Vista?

Answer:Intellipoint 4.1 mouse software

download it here

http://www.microsoft.com/hardware/do...px?category=MK

1 more replies
Relevance 63.14%

Hiya

Thought I'd put this in here, as its a hardware update, and for every OS. If not, please move. Thanks

IntelliPoint software gives your Microsoft® mouse full functionality and lets you customize the mouse to fit your needs. For example, you can:

Reassign each of the mouse buttons, including the wheel button, to perform a command or keyboard shortcut.
Modify the mouse settings, such as the pointer speed or wheel scrolling rate.

http://www.microsoft.com/hardware/m...aseID=42094&area=search&ordinal=4&redirect=no

Regards

eddie
 

More replies
Relevance 63.14%

A few months ago we used an Intellipoint mouse with no problems then we had to reformat our hard drive thanks to some software anyway we used the mouse that came with our computer then we went back to our Intellipoint mouse and the scroll wheel doesn't work and when you right click some of the functions on the menu don't work. We have an Intellipoint 3.0 mouse.
 

Answer:Intellipoint mouse problems

6 more replies
Relevance 63.14%

I recently moved the computer, shut down properly then disconnected all devices. Re-plugged devices and applied AC plug then did a power up. All devices were able to function properly accept the Wheel Mouse. I see the pointer on the screen but it is froze and I have to use the keyboard to access desktop icons. I have tried the restoration cd but because I upgraded from Windows 98 to Windows XP home a long time ago the cd driver is not compatible. Any help on understanding what's happened is needed. The mouse is a serial port connection into port 2 of my Gateway Performance 700 Mini tower.
 

Answer:Intellipoint Mouse Freeze

Baught new Intellipoint Wheel Mouse, old one went bad! Drivers stilll worked with new mouse and back up and running.
 

1 more replies
Relevance 63.14%

Greetings,

I've had Intellipoint installed for a long time now without issues. However, recently everytime I reboot my computer the software resets the cursor speed and unchecks the Enhance Pointer Precision box. I completely uninstalled the intellipoint software as well as the mouse drivers in device manager and then rebooted the computer and installed the newest version of intellipoint. The problem still persists. Any ideas as to what could be causing this minor inconvinience?

Are there any registry settings that store configuration options?

Thanks,
Xsylus

More replies
Relevance 62.73%

Hi, I have Vista Home Pemium. I installed a Natural Wireless Laser 6000 mouse and Intellipoint 6.1. The mouse function is very erratic - it works well sometmes and other times you have to click a few times to get any response. Very frustrating.

Any solutions will be very welcome.

Pieter.

Answer:Microsoft Mouse/Vista/Intellipoint

First, because it is easy, check Device Manager and see if there are any flagged devices. Make sure to check "show hidden devices". Report any flags here.

If no flags, then you need to find out if this is hardware or software. The mouse could be bad, or there could be a problem with the software. Uninstall the software. The mouse should function as a basic PS/2 mouse without the software. I have a Logitech G7 (high-end gaming mouse) and I didn't bother to install the Logitech software. Works just fine.

Try using the mouse (with no software installed) on another computer. If the problem moves with the mouse, it's hardware. If not, software.

4 more replies
Relevance 62.73%

I bought a Microsoft Intellipoint 4.1 mouse, it was sluggish and radomly went upwards and to left on its own. Took it back to the shop after one week and they replaced it. Re-installed new mouse, using new USP port (without the adaptor) and its now much better, but does still go up and to left, on its own, and at times is sluggish. Anyone have any ideas please?

Answer:Problems with Microsoft Intellipoint 4.1 mouse

Optical or ball?

9 more replies
Relevance 62.32%

I just moved into a new apt, and we have no hard line internet connection. We do have wireless internet setup and both of my other roomates have successfully connected, but I do not have the same luck. I feel the problem may be fairly simple, but just do not know the solution. My computer is still trying to connect to my old wireless carrier, and when I click on "view available wireless networks" my computer says that I have selected another program to handle my wireless internet. Do not know how or why this is occuring. Maybe something to do with the IP address. I am a college student and desperately need internet connection for school. Any help will be greatly appreciated!

More replies
Relevance 62.32%

This unit got some viruses,  reloaded win7 and everything works fine except for the wireless connection. In the DM esepcially under Network Adapters, I am not seeing any problems with any devices, it shows 802.11n wireless Lan Card. I can see my network and put in my password to connect to my network but it is showing "limited connectivity"? I have 3 other computers her eon my netowrk, all wireless and no connection issues with any of them, with a wired ethernet connection straight to my router, no issues with this desktop, does this mean maybe the viruses has damaged the unit's built in wireless card?

Answer:HP Pavilion 6000 Desktop wireless problem?

Did you reinstall the wireless LAN driver ?
 
System doesn't appear to be supported by HP for Win 7, so I would try the Vista drivers.
 
Is this a P6000 desktop...or a DV6000 laptop?  Neither has Win 7 drivers at the HP website.
 
Louis

11 more replies
Relevance 61.91%

Microsoft Intellitype and Intellipoint 7.0 drivers released.

Software Download

Answer:Intellitype/Intellipoint Mouse/Keyboard 7.0 Drivers

Thanks, Aaron. I've been waiting for these as, although the Vista drivers do work to a certain extent, they have their limitations. I look forward to installing these later.

7 more replies
Relevance 61.91%

I have a Comfort Optical MS mouse, PC details in Rig Specs...

anyway, before installing intellipoint software, pressing the wheel button down, while browsing websites, enabled a circle on the pointer, where you could move the mouse up or down to scroll the site... now intellipoint has changed it to the 3D Flip... what is the previous action called? and how do i get it back if the option is not listed in the intellipoint drop down for available commands?

Answer:Microsoft Intellipoint mouse - quick question

Open your mouse options in the control panel and set the wheel button to "middle click".

It should be possible to have settings specific to an application. I have my browser settings for middle click, but my standard setting is for the default.

2 more replies
Relevance 61.91%

I have an A4 tech X6-80D and i draw in Autocad and i have some accuracy issues when i zoom in a lot. The mouse pointer moves in intervals of around 10 (autocad) units which makes life a lot more difficult. I don't know if there are any settings in autocad that can fix that, so any info on that would be great.

I started this thread with question on Microsoft?s IntelliPoint software

I can not comprehend which one of those programs i need to install. I don't know in which category my mouse is, it's a USB optical so it can be a "Basic Optical Mouse" or a "Optical Mouse 100" or any one of the dozen other types.
I don't know if that's even going to help but it's worth a try.

Answer:Mouse accuracy and Intellipoint’s Precision Booster

Look on the bottom of the Mouse and it should have a label telling you what model it is; also download the latest (and, greatest) drivers for the mouse (Microsoft's IntellinPoint software). Once you have those two things you should be able to do what you are looking for (sometime, don't want to commit). . .Good Luck. . .

7 more replies
Relevance 61.09%

Ok I have a Microsoft Wireless Natural Multi-media Keyboard & wireless Multi-button mouse & I love it.

I've had it for years & it comes with it's own software called Intellipoint Keyboard/Mouse.

But I've upgraded the mouse to their new blue laser Explorer mouse & love that. But they have not come out with a new updated wireless Natural Multi-media keyboard (to my knowledge anyways)

Everything was fine until i did a recent windows update & it updated the mouse & keyboard software & it only sees my mouse, no longer my keyboard & even though my keyboard is still working, all of my Hot Multi-media keys no longer work.

I tried installing the original Intellipoint Keyboard cd but during installation it says that this program is blocked.

What can I do to get my multi media keys working again?

Thanks.

Answer:Intellipoint Keyboard software won't install because New mouse softwar

Anyone?

7 more replies
Relevance 61.09%

not by itself, that is.
but all of a sudden, when i move the wheel down 1 notch, the document/page goes down just like i clicked the center of the scrollbar.
i'd like it to behave like i just clicked the down or up button at the bottom/top of the scrollbar (what can i say? i'm a control freak).
i already have the mouse wheel speed set to the slowest in settings (and have accelerated scrolling disabled).
this isn't an "end of the world" situation, just a major annoyance.

any thoughts?
 

Answer:intellipoint wiresless mouse won't stop scrolling like crazy

this isn't an "end of the world" situationClick to expand...

Maybe an end of battery situation? Meaning, is the battery maybe getting weak? Can get strange behavior sometimes.
 

2 more replies
Relevance 61.09%

Hi all, my mouse has started jumping to the primary monitor for default buttons, although the dialog is onthe secondary.
Windows says its HID driver is up to date (2006?)

Any help for this annoying bug would be greatly appreciated
Regards

Answer:Mouse Snap-To jumps to primary monitor (Intellipoint)

1 more replies
Relevance 61.09%

I have had a wireless Microsoft mouse and keyboard set for just over a year. The mouse has suddenly stopped working. I have reloaded software, and changed batteries, with no luck. Is it worth trying to contact MS about? I went to their website and support cost something like $30!
Any suggestions?
 

More replies
Relevance 61.09%

I have 3 computers (XP, Vista 32 bit, and a W7 64 bit). All have a Microsoft Wireless Laser 5000 Mouse and all work great.

Recently I purchased 2 new Laser 5000's through Amazon. One for a gift and one spare. When I tried installing the gift mouse on an XP machine, it didn't work. The light on the adapter was on but the mouse cursor didn't move. It's like no software is installed. I brought it back home and tried it on one of my computers that has a Laser 5000 already on it and still nothing. Then I opened the new spare mouse and it has the same problem.

I've uninstalled and installed the software several times. My old original Laser 5000 still works. I've tried drivers from the CD that came with it and also from the Microsoft Web site. I checked the batteries and they're good. I've pushed the reset buttons. Device Manager says the devices are working. My old original mouse will not work with either of the new adapters and neither of the new mice will work with my old original working adapter.

The new mice were manufactured 3 months apart so I find it highly unlikely that it's a bad batch and 2 new mice with exactly the same problem is also highly unusual.

I'm open to any suggestions. I've installed a lot of wireless mice and had no problems, but now, two at the same time makes me think I must be overlooking something.
 

Answer:Solved: Two new MS Wireless Laser Mice with the same problem?

Are they on the right channels? Press the button on the receiver, than the reset button on the mouse so it can detect the receiver's channel.
 

3 more replies
Relevance 55.76%

Can anyone recomend me a good gaming mouse mat the one I got is hopeless as its small, I have tried looking on ebuyer with not much luck any advice??

Answer:A gaming mouse mat for my G5 Laser mouse

There are some mice mats referred to as gaming mats here, click here, but I couldn't attest to they're suitability. The ice mats seem to have a good rep amonst gamers (25x30 cm).Hope this helps.

1 more replies
Relevance 54.94%
Question: Laser mouse

I just bought a new laser mouse to replace my old one it was a wireless mouse also from microsoft now i have a wireless micro inv mouse after a few seconds now it seems to go into hibernate and i have to click a side button on the mouse to come out of hibernate mode it seems i have to receivers one for my wireless keyboard and( old Mouse) and one for my new one when i hook and old mouse no problems? I have an Xp window system that i had built for gaming and this new mouse is not seeming to work out to great i might have to bring it back if i can't get it to work right.
 

More replies
Relevance 54.94%
Question: laser mouse ?

what does a laser mouse do that a normal mouse cannot or an optical mouse cannot. I thought it might be a point at the screen laser curser but this seems to be wrong, I have looked on the web but none seem to explain the difference. any one explain in simple terms please.

Answer:laser mouse ?

A simplified explanation is that they read the surface more often and are therefore more accurate for precise movement. Usefull in graphics applications and games.

5 more replies
Relevance 54.94%
Question: 3d laser mouse

Laptop------ I use a 3d optical mouse which seems to work ok , it might not be the mouse, but I don't know how to phrase my question.--
this is what happens--- .n typing the question he the boy stood on t
whe burning deck.
notice how the cursor jumps or goes behind what I am typing, try this once upon it all worked perfectly, see that time it worked ok-- en isth happens -- what the heck can be wrong, it does see that last worked ok--- click the mouse and cursor shows , but when I type it does not flow with type always , even typing this its working but as I keep typing trouble will arise sooner or later usually sooner will tpe -----see--- the boy stood on the burning deck fire all around him ---sentance-- the last

Answer:3d laser mouse

Who makes this 3d mouse and did you look for the latest drivers off the makers website?

9 more replies
Relevance 54.94%
Question: Laser Mouse

I have a cordless laser mouse, which is sometimes so jumpy that it is hard to put it on a link. It works fine on some surfaces but on a lot of the it is extremely jumpy. One of the surfaces it is jumpy on is a mouse pad. Can someone tell me why this is happening and/or how to or what to use to fix it?

Answer:Laser Mouse

faulty mouse or bad link to the reciever?? my laptop mouse does it sometimes as well, but i think its because the connection to the reciever sucks.

5 more replies
Relevance 54.94%

Hello

i have a new problem, now my mouse is always on(the laser), even when my computer is shut off. it also turns off if i disconnect the usb. I notice this only recently started to happen. My cousin has had this problem for a long time too. Anyone know how i can fix this?

I have Inteli Explorer 3.0 with drivers.
 

Answer:Laser mouse is ALWAYS on

15 more replies
Relevance 54.94%
Question: Laser mouse

Ok so I really need a new mouse and with the help of beedub reminding me...I am thinking about a laser mouse. Not optical but laser.

http://www.logitech.com/index.cfm/pr...CONTENTID=9043

here is the link

OK so I am wondering what this gives me over optical and corded mice..(or both).

Can anyone answer this?

Answer:Laser mouse

unbelievable accuracy brother. the laser mouse makes optical seem like the **** that the wheel mouse has to offer. but who really needs such sensitivity...

9 more replies
Relevance 54.94%
Question: Laser Mouse

I have recently connected up a new wireless laser mouse, but it has massive responsiveness.I can edit the setting through my control panel, so it works fine once i've signed into my account, but on the welcome screen it is far too reponsive to se easily.I am wondering whether it is possible to lower the setting, so it does not move too quickly.

Answer:Laser Mouse

If it's any help you can use the tab and arrow keys to use this log in screen.

5 more replies
Relevance 54.94%

Recently I bought Microsoft Arc Mouse but I can't install IntelliPoint 7 in windows 7 rtm 64bit because I get an Error Code 1603.
Any ideas how to fix that?
Thank you very much.
 

Answer:Problem with IntelliPoint 7

8 more replies
Relevance 54.94%

Hello all,
I have a Microsoft Mobile Mouse 3000, that uses Intellipoint to set various functions.
All of a sudden, it disappeared from the Start Menu.
I tried to download a fresh copy, but it keeps saying "this is already installed and must be removed before the program can proceed."
The problem is - it is no longer there. I have uninstalled it and searches show nothing.
Revo Uninstaller also shows nothing there and there is nothing in "add/remove programs.
Any idea how I can get the program to run.
I also went to Device Mgr and clicked Update Driver, but all that did is freeze the mouse and I had to do a rollback to get it to work.

Thanks for any advice.
 

Answer:Intellipoint problem

If you're not aware, Microsoft IntelliPoint 8.0(mouse) and Microsoft IntelliType 8.0(keyboard) were released a few days ago.

-----------------------------------------------------------------
 

2 more replies
Relevance 54.94%

I tried swapping in a known-good mouse and this failed to resolve the problem. I entered BIOS setup and ensured that both the touchpad and PS2 mouse were configured to work. I uninstalled the mouse drivers and rebooted so Windows2000 would detect and install the mouse. After Windows had installed the Mouse it functioned fine however when logged out and then back in the mouse failed to work again. I flashed the BIOS on the laptop with the latest version (downloaded from HPs Omnibook support site). I installed Windows 2000 SP2. I then removed the mouse drivers again and rebooted. As of this time the issue remains unresolved. The PS2 mouse will not function. The laptop is otherwise funtional, however, and the user can navigate using the touchpad, keyboard, and pointing stick. Incidentally....Event viewer shows no errors....

Any thoughts on how to fix this?
 

Answer:Omnibook 6000 PS2 Mouse nonfunctional

Are you using a Synaptec's (sp?) Touchpad (which my lappy has)? If so, you should be able to go into control panel - mouse, and there should be some settings (over and above the default windows mouse settings if you have the synaptec drivers) to have the ps2 mouse enabled as well as the touchpad. You may also want to check out device manager and ensure that there's no conflicts between user input devices.

If you aren't using a Synaptec touchpad.. then ugh.. you may need to contact your laptop manufacturer for assistance.
 

1 more replies
Relevance 54.53%

I'm thinking of buying a new mouse as my old Microsoft explorer 2.0 has started to perform poorly. I had a look at some Logitech mice today and I came accross this one:
http://www.logitech.com/index.cfm/products/details/GB/EN,CRID=2135,CONTENTID=10917

Now I'm not specialized in this and so would like some advice. I like the design and the laser capability of the one I linked above but didn't really have time to examine others.
I'm not necessarily looking for a game mouse with thousands of buttons on it but a good response time one to work on my wood surfaced desk.
Also, it MUST to be wireless and would prefer laser as it's more precise.

Any advise please?
 

Answer:New Laser Mouse (advise)

It looks nice, only thing a lot of people look for in cordless mice is the batteries - the fact that they take AA batteries means they'll need replacing more often whereas if you got, say an MX1000, it has a charging cradle so doesn't require you to replace the batteries.

Just a thought....
 

1 more replies
Relevance 54.53%

hey i was wanting a new mouse and wanted to know if anyone has used logitechs new laser mouse???

these guys had only good things to say, but there seemed to be concern about picking it up and lag. also user reviews on the site showed it was not well recieved by gamers. Any input?

Answer:new Logitech Laser mouse

personally don't really stick with Logitech mice or keyboards but you should check this one out

http://www.newegg.com/app/ViewProduc...105-151&depa=0

wireless optical very confortable if you are right handed and I experinced lag only if I run it on a computer slower than 1GHZ

9 more replies
Relevance 54.53%

Hi  As part of my home setup I'm using the Lenovo BT Laser Mouse. After upgrade to W10, everything works fine (sofar!), but bluetooth can't connect/pair with my BT Laser Mouse, but my K810 KB works fine, as does my wife's MS Sculpt Mouse when I pair it. Any ideas? jjwho

Answer:Y2P - Bluetooth Laser Mouse

Hi, Do try:- force update BT drivers from Windows Update (Control Panel - device manager - select your BT adapter and in the driver tab check for online driver update- in BT settings turn off, wait a sec, then turn it back on- delete device and pair it again I had the same problem and this did it for me.

2 more replies
Relevance 54.53%

I have two laser mice... one a targus and one a microsoft. They lasted me almost 2 months each. But after i changed the battery both are not working. The microsoft tech support mailed me something which i did not understand... how do i get rid of this problem???
 

Answer:laser mouse problems

can you post the e-mail?
 

3 more replies
Relevance 54.53%

Hello,

As I move my mouse in a circular motion, the motion stalls every so often. I believe there's a software incompatibility. This problem did not exist before I deleted some softwares recently. I am currently using Windows 2000 Prof. Does anyone know what might be the problem here. I appreciate any help in resolving this problem.

Thanks.
 

Answer:Stalling Laser Mouse

10 more replies
Relevance 54.53%

I recently bought an advent ade-LR1 3d laser mouse and installed it as directed on my new laptop. Everything worked okay for the first week, but it suddenly stopped being picked up by the computer. The buttons worked but the cursor didn't move. I uninstalled and reinstalled but it made no difference. Any suggestions? Thanks in advance. btw its cradle is plugged in via a usb
 

Answer:laser mouse problems

Sounds like the mouse is broken. If it's still new exchange it for a new one.
 

1 more replies
Relevance 54.53%

Dear all,

I just bough my new laser mouse fr PC fair..
ACROX MT1 laser mouse...but when i plug into my laptop...show USB is not recognize by window...i trying to download the driver from internet..but there is not such model for downlaod the driver as well....??

Anyone can help?

Thanks
 

Answer:Acrox MT1 laser mouse cannot use??

Its probably "MTI"(the letter I not the number 1) not "MT1" Check http://www.acrox.com.tw/driverdownload.asp for drivers.

If the MTI driver doesn't work, try a few of the others as mouse drivers are usually fairly standardized.
 

1 more replies
Relevance 54.53%

The scroll wheel moves the cursor from side ti side. How do i make move the page from side to side like it used to.?
 

Answer:Logitech laser 660 mouse

I don't use the Logitech software but I'd imagine the setting would be.

If you can't find it I'd just uninstall the Logitech Mouse software from Add & Remove Programs and reinstall it.

You can get the latest version of Logitech's Mouseware from here: http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1793,contentid=6003
 

1 more replies
Relevance 54.53%
Question: Laser Mouse niggle

Hi guys,A few months ago, I ended up with a PC-Line (PCL-FL1) Laser Mouse from PC-World.It has been a great item so far,,,, but yesterday it started to 'play up' (I think that's the technical term !).It seems that the curser is now a bit,,, well sort of 'wobbly'. It sort of flickers/jumps about a bit around where it should be. It isn't constant, but every 2 or 3 times I move it.It's a USB item & I have tried it in several sockets, but it's the same.I don't have access to another unit to try it on.Any ideas out there please ?Am about to call PC-W, but I didn't keep the receipt for this,,,, but if there is a known problem with this model, it would be nice to tell them.thanks for reading this,,,,,

Answer:Laser Mouse niggle

Try Uninstalling it from Device Manager. But first before you do the above, connect your old mouse to use to reboot so that it as two mice's reboot and it should reinstall the mouse. The one to uninstall is a HID-compliant mouse

6 more replies
Relevance 54.53%

I have a Logitech Laser Mouse, but the wheel (for scrolling) seems to stop working after a few minutes when browsing. If I open a new browser, it works, but then stops again.

What's going on?
 

Answer:Logitech Laser Mouse

Logitech "Lazer ?? Is that the Logitech optical mouse ( i.e MX series )?
If it is do you happen to have installed the lastest driver for it ? ( not the one that came with the cd disk)
 

1 more replies
Relevance 54.53%

I'm not sure what is up with my setoint software I should be able to configure my mouse with buttons but at times I cant see the mouse in setpoint any ideas???

Answer:My G5 Laser Mouse is going funny!

Anyone???

7 more replies
Relevance 54.53%

Bought a Logitech MX1000 laser mouse and it feels nice
The damn cursor jumps around the screen sometimes. I lowered the mouse speed a little. I tried different mouse mats. I made sure it was fully charged. It's got the latest drivers.

Save my sanity - please!!!
 

Answer:MX10000 Laser mouse

I wonder...

Logitech is pretty admanant about keeping the receiver away from other elctonic devices.

Have you tried moving it somewhere else?
 

16 more replies
Relevance 54.53%

I have a Perixx laser mouse and every so often I hear the windows sound that it has disconnected from the usb (link below).  My mouse become unresponsive for a short while until I hear the sound that it has reconnected and all works fine again. I would say it just does it randomly just now and then, but I cannot figure out whats wrong with it. I have tried some fixes that I thought would help, like changing it to a different usb port and I have tried uninstalling it and reinstalling it. I also looked on their website and it tells you to just use the window driver, so there is no manufacture driver for it. The only other thing I could think of is that I use a hard mouse mat and sometimes it gets oily from using it by hand. Do you you think this could cause it? That maybe the laser has run over a oily surface or something? http://www.amazon.co.uk/Perixx-MX-2000-Programmable-Gaming-Laser/dp/B0083H4NG4/ref=sr_1_1?ie=UTF8&qid=1374162179&sr=8-1&keywords=perixx+mouse

Answer:Laser mouse keeps disconnecting from Usb

Possibly the mouse is faulty; have you tried it on another computer, and tried a different mouse?

1 more replies
Relevance 54.53%

Hello,

I have a problem, so i'm running at lenova g550 laptop with a creative fatal1ty 1010 mouse. I just recently bought this laptop and moved my desktop mouse to my laptop however it does not work. It will click but the mouse does not move. I need it for work/gaming because my pc is fried. The mouse will work sometimes, but other times it won't(still click-able but will not move). I have added a mouse pad surface (which shouldn't matter since it can be used on any flat surface) Tried updating the drivers, uninstalling - reinstalling, different usb port, been through device manager settings, still nothing. Usually when my mouse is active the side will light up and the sensitivity button will glow. I know it's not the mouse, but I don't know exactly what could be wrong.

Please help this is driving me crazy! :cry:cry:cry:cry
 

Answer:**Please help, Laser mouse problems

Greetings, almoSTFUn.

What operating system version and Service Pack # are you running? The reason I ask: from what I've been able to find, Creative does not offer native support for Windows Vista/7 with the Fatal1ty 1010 mouse.
 

3 more replies