Computer Support Forum

Solved: NVidia Riva TNT2

Question: Solved: NVidia Riva TNT2

I have an NVidia Riva TNT2 32MB AGP 4X card in my IBM PC300PL. I have drivers that came with Win2k for it, but they are not DirectX compatible. I went to get the drivers for it from NVidia's site, but when it unzips them and attempts to install them, it says that there aren't any compatible cards in my sytstem. Any Ideas?

J.S.

Relevance 100%
Preferred Solution: Solved: NVidia Riva TNT2

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Solved: NVidia Riva TNT2

8 more replies
Relevance 83.52%

Hi,

Can anyone assist me how to update my video card to the latest version (if there is). It's a bit old. its a 32mb AGP Nvidia Riva Tnt2/Pro (Microsoft Corp.) driver date is 4/7/2004 version 5.6.7.3 (stated in device manager) I have WIndows XP SP2

Are there freeware that can figure out what is installed and recommend safely which version to update or driver to download so I can reinstall. I can't seem to find the driver cd that came with this video card.

Thanks.

Tony
 

Answer:Solved: Updating Nvidia Riva Tnt2/Pro

10 more replies
Relevance 75.69%

can anyone tell me where i caqn get the latest drivers for this
as i cant play my game i just bought i think i need my graphics
card to be use open gl or something
 

Answer:Nvidia Riva Tnt2 Model 64

12 more replies
Relevance 75.69%

Hi,
I'm putting a new motherboard in my PC (Asrock p4v88) and in the instructions for the board is a note (do not use a 3.3v AGP on the AGP slot of this board). I hope to fit my old video card into the new mthbrd, it is a NVIDIA RIVA TNT2 64 PRO. I haven't a clue what the voltage is of my video card. Can I fit this old card in or do I go out and purchase a new video card of a known voltage?

Thank you
Donald Ashton
 

Answer:Need The Voltage Of My Nvidia Riva Tnt2 64 Pro

I don't recommend using that card in that machine. Not only is there a risk of it damaging the slot, it's also an incredibly old and slow card, if your new motherboard has onboard video it is likely faster than that TNT2-M64.
 

1 more replies
Relevance 75.69%

I have a nvidia riva tnt2 model 64 driver version5.01.2001.1240 and i am looking for an update but all the sites coming up say PRO does anyone know if they are the same or not .
confused again

Answer:nvidia riva tnt2 model 64

try www.nvidia.com and go to the download section. self explanatory from there.

2 more replies
Relevance 105.78%

i can't even bet a boot with a nvidia riva tnt2 model 64 w/8mb ram on a MainBoard TXpro-II or a knock-off replica thereof. funny thing is: the card workes fine in another comp with a diff mobo (this one, a spearfish with a xeon 450 pentium 2) and to add to insult, a couple of old junk video cards WILL work in the TX-proII. i also have an Aopen socket 7 mobo i could use for this system but the exact same story applies: the junk video cards work in it but not the tnt2 card which i just bought. by junk video cards i mean they have bad memory chips on them and they have garbage mixed in the on-screen display which makes them kind of useless except for getting a system to boot at all. if it matters they both have S3virge chips on them. running win98 fully updated with ie 5.5 also fully updated. have the latest nvidia drivers avail but of course haven't gotten that far. i did, however remove all the old drivers from device manager and found no nVidia references in the registry to delete at all. any clues would be highly appreciated. thanx, JL
 

Answer:System won't boot with Nvidia Riva TNT2 64 8Mb

When does your system bang...what message? If it's Windows protection error, you probably need to assign an IRQ to VGA in bios. I had this same problem...see Replacing Video card...steps?" in this forum.
 

3 more replies
Relevance 105.78%

Hello friendsI have a Time PC and the memory is only a NVIDIA RIVA TNT2 64......I'm not to sure what my best upgrade is.Sometimes it would say not enough memory so I would like to go to 128 or 256...Does any SDRAM card fit 168 PIMM or do I need special card to fit my system from halvewit Trev

Answer:NVIDIA RIVA TNT2 MEMORY UPGRADE

I am a little confused? The limits will be set by the chipset on the size of max RAM you can install.Rule of thumb is no mor ethan 512mb for 98/98se/ME. XP and 2000 love it!The graphics card can be easily replaced with a fairly good price these days Ti4200 of Fx5200 card. 64MB/128MB/256MB flavours.

3 more replies
Relevance 105.78%

Hi all, my neighbour who's PC runs on WindowsME had the following message appear when he started his PC up tonight.Error 0D000000F0. Then something about a video driver failing to load.In safe mode, I looked at the video drivers which where given as:NVIDIA RIVA TNT2 Model 64 x. I checked out the properties and it said the following:C:\Windows\System\NVDISP.DRVc:\Windows System\NVINI,vxdc:\Windows\System\vmn32.vxd [vdd.vxd]and RAGE PRO TURBO AGP 2X---------------------------------------------In Safe Mode, I tried the last 3 System Restores but each failed.Could someone kindly direct me to a site where I can download the video driver my neighbour needs. I think the driver would have to fit onto a floppy disk because I'm not sure if his CD drive works.I'm using a desktop with XP Home SP2 and a laptop with Vista on it.I do have a floppy drive on the desktop and a few floppy disks.I could not find the Last Good Configeration (I think its called)to try that.Many thanks,Mike

Answer:NVIDIA RIVA TNT2 drivers help please, thankyou

This may come as a surprise:click here

10 more replies
Relevance 105.78%

Hi gang well i just purchesed some video cards for a princely sum
and some ram and one of the cards was a riva tnt model64 agp
but i dont have the softwear can you help me divers and so on

Answer:my cheap nvidia riva tnt2 model 64

windows xp?
WinXP/2k - (71.89)

tweak it...if not the os you need, just lookup drivers....legacy at nvidia

1 more replies
Relevance 105.78%

Hello Experts,

I have purchased a Graphic card PALIT DAYTONA nVIDIA RIVA TNT2 M64.

I am going to install it in GIGABYTE P4 Titan GA-8IRX, REV: 2.0, DDR RAM, motherboard. This motherboard support only AGP 4x (1.5V) card due to Intel 845 chipset cant support AGP 2x(3.3V).

nVIDIA RIVA TNT2 M64 card has a jumper port JP1 which is open. Is it AGP 4x mode by default? Or I have to set jumper to make it AGP 4x.

Please suggest me how I install the card in the above-mentioned main board. I am waiting for your advice soonest possible.

Thank you.

Naim
Dhaka, Bangladesh
 

More replies
Relevance 105.78%

I am running a Vista Home Premium PC with a 32MB Nvidia Riva TNT2 video card.
I can't update the drivers for the card from any driver install pack I can find. I cant do it with Windows XP, either. Can someone help, so I can get the best out of my old card?
Thanks,

Computer:
HP Vectra VL420 DT
Intel Pentium 4 1.59 GHz
767 MB RAM
32 bit Windows Vista Home Premium
 

Answer:Nvidia Riva TNT2 update drivers

Support for TNT2 ended quite some time ago. I'm surprised you can even make a TNT2 work with Vista at all. Even for XP you have to go into the legacy drivers and download one of the older drivers that still includes TNT2 support from the nvidia website.
 

2 more replies
Relevance 105.78%

Um, this might sound shallow, but where could I find a BIOS upgrade to the NVIDIA Riva TNT2 Pro graphics card?
 

Answer:Nvidia Riva TNT2 PRO Bios question

What brand is it? Check the manufacturer's site. It might still be there.
 

3 more replies
Relevance 105.78%

I have just dowloaded and installed a new driver for the above graphics card.Everythings seems to be ok. Except when I go into control panel and look at nview desktop manager everything but the first tab is greyed out.I runing windows 98 with 192 ram amd a 900Athelon processor.Thanks

Answer:nvidia riva tnt2 model 64/pr064

I have the same card on my older computer i updated the drivers to TNT264 PRO because i upgraded to XP if you are using W98 i would roll back the driver to the older one you don't need the update for W98 in my view.

2 more replies
Relevance 105.78%

I recently reformatted my computer's harddrive, and I've been working on getting everything back to it's normal working order. I'm having issues with my video card. It should be installed correctly, I haven't taken it out at all, and it worked a while before the reformat. I think I have the correct driver installed (This one).

But when I plug the monitor into the video card's plug, the monitor won't show anything, it's just blank with the little light, normally green, glowing orange. When I go to the System Information, the only video card that shows up is the one on the motherboard.

Am I using the correct driver? Any other possible solutions?
 

Answer:nVidia Riva TNT2 Model 64 issues

G'day Redalert95, I gather you have onboard video and that is working but your card is not. It is not a good idea to plug video leads if the machine is running, it could quite easily kill something.
It is possible that you may need to disable the onboard video in BIOS to allow the daughter card to operate.
This makes it odd that it may have changed from previous settings which were apparently working OK.
If this might be correct it may be pertinent to replace the battery at this time before going any further.
Your board manual BIOS settings should help determine what is happening. In some machines if you plug in a video card the onboard is automatically disabled, but your note does not infer this to be the case, therefore it seems you are going to have to carefully follow the BIOS set instructons in the manual. You likely have an onboard enable somewhere. The LED showing orange instead of green simply indicates no information is being received by the monitor.
You should not need any driver to be loaded to give your card operation for the monitor to operate in a basic mode.
The proper driver will only give the thing all the colours and abilities you are used to normally seeing.
Be extremely careful and ensure the power lead is removed anytime you plug items like cards, and ensure your follow antistatic rules.
Cheers, qldit.
 

1 more replies
Relevance 105.78%

So i got this free computer without a hard drive to run a bot on, I got the hard drive and now i cant do anything because of this video card it came with. Its a nvidia riva tnt2 model64/model 64 pro. Iv looked everywhere to download the driver but i cant find anything. Im running windows xp on the computer and when i tried the nvidia site it said it cant find the hardware, when i tried some other site, it said the download was meant onlt for windows xp x64. is there anywhere i can get this driver for windows xp and if so, where can i find it?
 

Answer:Nvidia riva tnt2 model 64 driver

Does the motherboard have on-board video too? If so, use the on-board video until you get the TNT Riva driver sorted
 

1 more replies
Relevance 105.78%

I continue to get intermittent screen messages that I have a problem with my Nvidia graphics driver, occasionally causing shut downs and generating error messages to microsoft.
Although possibly completely unrelated, I also find that my computer shuts down on its own if left alone about 30 minutes, and when turned back on, goes through an odd reboot on its own whcih returns me to where I was before leaving.
The microsoft proposed solution is to download a new driver off the Nvidia website though they also say Nvidia has no solution to the problem. When I go to the Nvidia website, I can find a downloadable driver for XP. (www.nvidia.com/object/driver_installation_hints.html) , though the instructions request me to:
1- disable download accelerator utilities ( How do I find if I have any? I recall loading one at one time, but can't remember if it was on this computer, or find anything suggesting this on my start menu)
2-turn off my virus protection- can do
3- remove Nvidia display drivers from the control panel using the add/remove function.- I can't find any. However, I do find reference to them in my systems folder listing a TNT2 nmodel V 5.6.7.3 dated 4/7/04. It seems odd that I have a listing in the latter, but not in the former. It also seems odd that they would request the removal of the old one first. Will my monitor work if its removed??
Thanks for any assistance
 

Answer:Updating Nvidia Riva TNT2 driver

d/l and save the driver to the desk top
in the device manager uninstall the card
reboot tapping f8 and choose vga mode
when windows finishes booting and reinstalling the card
disable a/virus
install your drivers
reboot the computer
 

2 more replies
Relevance 105.78%

Hi

I'm searching for the latest driver for my husband's graphics card which is:
nVidia riva tnt2 model 64

His OS is win98, and he has dirX 9.0.C. I'm TERRIBLE at finding drivers and I was hoping someone might know how to locate this driver. I've been to the site, but as I said, I'm not very knowledgable about drivers, and I ended up very unsure as to what the latest driver for this would be.

Any help would be very appreciated!
Thanks much in advance!
 

Answer:Latest driver for nVidia riva tnt2 m64 HELP PLEASE! :)

kelticvixen said:

Hi

I'm searching for the latest driver for my husband's graphics card which is:
nVidia riva tnt2 model 64

His OS is win98, and he has dirX 9.0.C. I'm TERRIBLE at finding drivers and I was hoping someone might know how to locate this driver. I've been to the site, but as I said, I'm not very knowledgable about drivers, and I ended up very unsure as to what the latest driver for this would be.

Any help would be very appreciated!
Thanks much in advance!Click to expand...

Here is the file you want: http://download.nvidia.com/Windows/61.76/61.76_win9x_english.exe
 

2 more replies
Relevance 105.78%

please send me a link where i can get this nvidia riva tnt2 m64 for windows xp sp2
 

Answer:latest driver nvidia riva tnt2 m64 please

http://www.nvidia.com/object/winxp_2k_61.77
 

1 more replies
Relevance 105.78%

If you are still using this old video card in your Windows XP desktop(like I am in one of mine), the NVIDIA ForceWare 61.77 and 66.93 drivers are the ones that you want to install and use. If you try to install and use the 71.84, 71.89, or newer versions, they will NOT install. I have done some experimenting and have confirmed this.

-------------------------------------------------------------------------------------
 

Answer:For Those Who Are Still Using A NVIDIA Riva TNT2 64 Video Card

16 more replies
Relevance 104.96%

Now, technically, which graphics card is faster in drawing: the NVidia Riva TNT2 AGP or the INtel 845G PCI? I noticed that the TNT2 has slightly higher framerates.
 

Answer:NVIDIA RIVA TNT2 and INTEL 845G COMAPRISON

Do you meant the integrated series? If so, the Riva TNT would be better.
 

6 more replies
Relevance 104.96%

Hi..
I just performed a clean install of windows xp professional edition on a freshly formatted hard disk.
Here is my current hardware configuration:
PIII 500Mhz, 192Mb Ram, 16Mb Riva Tnt 2 Pro Graphics, Asus P3v4x motherboard, creative vibra 128 sound card..

I have a problem with Direct draw. whenever i try to test direct draw thru dxdiag, my screen flickers a few times and the my computer hangs. I have now diabled direct draw acceleration. I have tried the latest Nvidia Detonator xp drivers (2.1.83) as well as the default drivers that came with xp. There is still no difference.

I could use direct draw and direct 3d with the same hardware setup on my previous system, Win ME. All the directx games ran fine there.

Please let me know what the problem is as this is the only glitch in an otherwise impeccable system..

Thanks,
Apurva Mehta
 

Answer:{RESOLVED}DirectDraw Problems on Nvidia riva Tnt2

12 more replies
Relevance 104.96%

Hi, i just wanna know,
what is nvidia riva tnt2 model 64 latest driver?
 

Answer:what is Nvidia riva tnt2 model 64 latest driver?

Start here :
http://www.nvidia.com/content/drivers/drivers.asp
 

3 more replies
Relevance 104.96%

I'm using Windows 98SE.

I've downloaded and installed the Nvidia 61.76 video drivers(the most current version for 98SE) for this video card, but it refuses to get out of 16-color, 640 X 480 resolution mode. Every time I start up and Windows loads, an error message appears with the following:

There is a problem with your display settings. The adapter type is incorrect or the current settings do not work with your hardware.

Any suggestions?
 

Answer:A Question About Nvidia Riva TNT2 M64 Video Card

If my memory serves me right, I fixed the problem one time by going into Display Props/Settings/Advanced and changing the display adapter. I had to show Windows exactly where the one was, that I wanted to use. It was with a S3 Savage card but maybe it'll work the same with your Nvidia.
 

2 more replies
Relevance 104.96%

do you guys know what my problem could be? my pc hangs/restarts whenever it has to render some 3d graphics, or even when it simply has to use directdraw or direct3d. it even hangs when i press the "test direct3d" button in dxdiag. it even hangs when i use the drawing tools in microsoft word!

i do believe its something to do with directx. the problem is only "solved" when i set my video hardware acceleration to "none". but of course i dont want to have forever sluggish graphics. any suggestions...? btw, i using windozeXP pro.
 

Answer:nvidia riva tnt2 problem with directdraw/direct3d

What version on the nvidia detonator drivers are you using?

What version of DirectX do you have installed?

Have you been to Windows Update and installed the necessary updates?
 

3 more replies
Relevance 103.73%

Right, so I have a Creative Model CT6980 Graphics Card otherwise known as a TNT2 nVIDIA RIVA M64/32MB, but I cannot find a good XP driver for it. There seem to be massive problems with TNT2 nVIDIA RIVA M64 driver such as making the system fail to recognise the card, a bit of a problem, and as I am working on someone elses system I am under orders not to destroy it. Therefore does anyone know of a low risk XP driver that would do for this card?
 

Answer:CT6980 or TNT2 nVidia Riva Driver Badly needed

Try this site: http://www.driverguide.com Requires registration w/ a valid email address but it's free and you get a certain number of free downloads a month... in the meantime, I'll do some more research. If you can't find anything at driverguide, I'll post a link here.... GOOD LUCK!!!! You should find what you need at driverguide.

hopperdave2000
 

14 more replies
Relevance 102.5%

The title says it all - Thanks!

I have a old pc with a 245W PSU and I m thinking about upgrading the card.
 

Answer:Anybody know the power requirements of a NVIDIA RIVA TNT2 16mb graphics card?

Couldn't find a quick answer to this but if the "old" machine runs okay as it is then it should have no problem with the TNT2 card. They are a pretty old card and were designed for the machines of the day which (by today's standards) were pretty slow and didn't need a huge amount of power to get them going. I assume the "old" machine has a AGP slot to fit the card into?
 

3 more replies
Relevance 95.94%

Hi. I was wondering...are the TNT and TNT2 drivers interchangeable? I need a Windows 2000 TNT driver, because the one supplied with the OS doesn't have Direct3D support :/...Thanks for your help!
 

Answer:RIVA TNT and RIVA TNT2 drivers interchangeable?

My guess, is Yes, they can be used. It definately isn't going to hurt to give it a shot, worst case you just uninstall. TNT2 was just before I began to pay attention to hardware.
 

2 more replies
Relevance 94.3%

Trying to reinstall XP on a machine that was WinME.
Everything went smooth, except the colors are way off.
I tried an update via control panel-display-adapters, and it says it's working fine.
But the reds are way off as are the greens.
Anyone know what's going on here?
Video card is, NVIDIA RIVA TNT2 Model 64/Model 64 Pro.
AGP 4x.
Thanks.
 

Answer:Colors are all wrong - ibm netvista NVIDIA RIVA TNT2 Model 64/Model 64 Pro

thats an old card, im pretty sure nvidia doesnt support it with their latest drivers any more, try seaching for one thats, say...1 or 2 year old drivers?
 

2 more replies
Relevance 93.89%

NVIDIA RIVA TNT2 Model 64/Model 64 Pro PROBLEM..

i saw something about this in another thread but can't find it
***
anyway my 32mg card only shows 16mg
the other thread listed a driver that worked for one member and i have the same driver...doesn't seem to work for me
****
is there a dialog or setting...?
thanks
mac
 

Answer:NVIDIA RIVA TNT2 Model 64/Model 64 Pro ONLY SHOWS 16MG

16 more replies
Relevance 93.89%

I have a nvidia riva tnt2 model 64/model 64 pro pci bus videocard.
The other day I bought the follow up of MOH (sorry forgot the name because returning it to the store)but ofcource you already see the problem rightaway:error log file of the game told me the card was missing out on some functions.Can this card be updated so "heavy duty games won't be a problem in the future?(il2/fb-wolvenstein-cfs2 run good though!)

Thanx for listening!
 

Answer:nvidia riva tnt2 model 64/model 64 pro update wanted

Well...you can get the latest drivers for the card, but it won't help that much, because it's a TNT2...and PCI....

If you wanted to play newer games, you'd have to get a new video card....but if you're running a PCI video card right now, then it may not be worth it...check if you have an AGP slot, is should be above the PCI slots on the motherboard, and slightly offset from them...if you have an AGP slot, then that's good, because you could get a good video card...but if you don't, you'll probably be better off getting a whole new system rather than just upgrading the video.
 

1 more replies
Relevance 93.07%

I have an NVIDIA Riva TNT2 model 64/model 64 pro adapter version 5.6.7.3 installed in my computer. Operating system of my computer is XP professional SP2. It won't load. Tried reinstalling it via the Add/Remove hardware menu still no lack. Tried updating the driver still no lack. Driver might be corrupted. Where can I get free copy of this driver so i can replace the corrupted one? The NVIDIA site provides for a higher version. Will this be alright to use as a replacement driver?

More replies
Relevance 93.07%

I have the Nvidia Riva TNT2 Model 64 / Model 64 pro video card and i want to install a game but the video card has to be in 256 color mode and in Windows i can only go to 32 bit what can i do? Any comments or posts would be great! Thank YOU!
 

Answer:Nvidia Riva TNT2 Model 64 / Model 64 pro Problem?

Just to be clear, 32-bit is actually 16,777,216 colors, so its much more then 256 which is just 256 colors. So for 256 you need to lower the color depth not increase it.
 

1 more replies
Relevance 92.25%

The title says it all. These are all 32MB cards, and I would like to know the best one and the worst one, any help? Thanks!
 

Answer:TNT2, TNT2 Riva and GeForce 2 MX, which is better?

As far as I know, there aren't any difference between TNT2 and Riva TNT2, but there are RIVA TNT2, RIVA TNT2 Vanta, and RIVA TNT2 M64.

Listed from the least to the most powerful:

RIVA TNT2 Vanta
RIVA TNT2 M64 (16mb card)
RIVA TNT2
GeForce2 MX

For more information about the differences, take a look here...
 

5 more replies
Relevance 84.46%

My wife's has a 3D Blaster RIVA TNT2 vedio card and I am trying to get some updated drivers, I am getting 404 messages on every web site I try. Can someone give me a link to find up to date driver?

Thanks
 

Answer:3D Blaster RIVA TNT2

have you tried downloading the drivers on the NVidia website.
the beauty of NVidia cards are they only need "One Driver to Rule Them All" meaning the detonator drivers on the website are capable of supporting even the older Riva 128 to the Riva TNT to TNT2 up to the smooth power of GeForce 3! pretty cool and convenient huh? anyway here is the URL for the latest detonator drivers.

http://www.nvidia.com/view.asp?PAGE=drivers
 

2 more replies
Relevance 84.46%
Question: RIVA TNT2 Model 64

Memory Frequency GPU : 125.01 MHz
GPU Frequency : 125.01 MHz

Is this the standerd Frequency for a

RIVA TNT2 Model 64
PCI

Answer:RIVA TNT2 Model 64

125/150 (core and memory frequency, respectively) is usually the standard for a TNT2 M64. Examine the memory chips carefully; these can be the key to why the memory is set lower than normal (usually, look for special numbers for the memory cycle time, e.g. a "70" might indicate a cycle time of 7ns, which equates to a default frequency of 143 MHz).

2 more replies
Relevance 73.8%

Each time I start up settings in display properties resets to
Screen resolution 640 X 480
Color Quality low 8 - bit
I rest them to
1024 X 768
32 bit
apply and restart and they reset to the above.

The correct monitor and Adapter are selected.

I ran a update search for each and it says I have the latest driver version.

If I need to update the monitor and Adapter driver what version and where do I need to go?

Any Help would be appreciated.

Larry

I resently downloaded service pack 2 and added Microsoft USB reciver wireless keyboad and mouse.

Operating system Windows XP Pro Service Pack 2 (build 2600)
Processor 1.4 gig pent 4
Maxtor 96147H6 Hard Drive
Main Circuit Board Hewlett Packard HP WMTA systern board 123
Bios Phoenix Tech
Memory Modules 512 meg RIM non-ECC
Display
NVIDIA RIVA TNT2 Model 64 Display adapter
View Sonic A90f+ 17" Monitor
Macafee
Firewall ver 6.0.0.14
Security center ver 5.0.0.0
 

Answer:Display Properties will not apply settingsNVIDIA RIVA TNT2 Model 64 Display adapter

get the latest driver from Nvidia themselfs for your GFX card .. go here http://www.nvidia.com/content/drivers/drivers.asp and click Graphics Driver > Gforce & TNT2 > XP/2000 and click GO ... this will locate the correct driver for you.
 

14 more replies
Relevance 66.83%

i have a nvidia riva 128/128tx grafics card (or it at least says so) in a dell optiplex gx150. been trying to get it to be true color but what ever i do it won't. am i going to have to install a new graffics card ? i tried to update but to no avail.please tell me what i need to do and if there is any way to go from 16bit to 32bit.

Answer:nvidia riva 128/128 tx

You need the video card drivers....if you have this card......type dxdiag in the run and find out...

8 more replies
Relevance 66.83%
Question: Nvidia Riva Tnt

Does anybody know what is the last driver of NVIDIA that supported RIVA TNT 1 (16MB)
 

Answer:Nvidia Riva Tnt

http://www.nvidia.com/object/riva_drivers

you can find one there.
 

3 more replies
Relevance 66.42%
Question: nvidia tnt2 m64

I have an Elitegroup motherboard with SiS620 chipset, and I've installed a pci nvidia tnt2 m64, but now lockups occur in 3d games, and sometimes in the Windows GUI.

Sometimes alt+ctrl+del will get me out of it in the GUI; it gives me a blue "system busy" screen and then I can click cancel on the close program dialog and everything's fine.

Sometimes it stays locked when I hit alt+ctrl+del, and it always stays locked in games.

I'm running the detonator 5.13 beta drivers, which are said to tbe the most stable. I have tried the latest drivers (12.xx), but with those the problem is worse because once it locks alt+ctrl+del never works, and the lockups are more frequent.

I've tried adjusting latency timing, looked for conflicts and tested power settings and everything seems fine... what could be the problem?

Thanks.
 

Answer:nvidia tnt2 m64

Wondering how you disabled your sis chip, this from the sis web site about adding pci card to a 620 system

If you add on a PCI VGA card on a AGP/Super AGP VGA based board (like 5600+6326, 530, 620), you
will need to set up the display priority. Every board maker has her way to do the setting. Some of them will implement
it in the BIOS, in the item "Integrated Peripheral","Initial Display First", you can choose "PCI slot". However some other
makers do the setting by jumpers, you need to refer to your manual or contact the makers for further help. The best
solution is to ask help from your board maker. However if you don't know who the maker is, you can track from the
store where you buy the computer, or ask any local pc dealer if they know there's a way to help you. After you
finish the hardware part, you can remove the our vga driver from your system. Please go to "Control
Panel","Add/Delete programs" to remove the driver. Please don't care about the exclamation mark that appears in the
Device Manager, if you have already install your second card successfully. It won't influence your VGA display.
 

2 more replies
Relevance 66.42%
Question: nVidia TNT2 M64

does anyone have this card? if so , can you look at it and see if it has a fan? mine only has a heatsink and someone told me that its supposed to have a fan. could this be the reason why my computer locks up when i play intensive games or watch videos?
 

Answer:nVidia TNT2 M64

i have one and it has no fan although it seriously needs one!!!!!!!!
 

1 more replies
Relevance 66.42%
Question: Nvidia TNT2 M64

I recently bought a TNT2 card. I installed , downloaded the lateset drivers from the nvidia website (41.xx) and ran it on my WinME system.Problem is when the computer starts ,before the BIOS and memory check, the amount of memory shown is 32 MB.While in Windows the driver shows only 16 MB (display properties-advanced-nvidia TNT2 Model 64). I had purchasd the card with 32 MB. So does this mean that in Windows only 16 MB is used ? How can I correct this error ?

Thanks
A.M
 

Answer:Nvidia TNT2 M64

some of your ram might be bad.windows should pickup the whole thing or not at all.I have a tnt pro 2 with 32mb.
try removing it puting your old card back in restart then shut down and put the tnt back in and make sure it is in evenly and firmly pushed in if it's not you could have problems.and then restart again.reinstall the drivers.
All internal work must be done with power off.
if you changed from pci to agp make sure that enabled is set in the BIO for AGP. It should work but it is a little finiky if it wasn't pushed in just right.so leave the case off untill you get it right because you might have to remove it a few times untill you get it right. good luck
 

3 more replies
Relevance 66.42%

I'm new to the computer world and looking to upgrade my video card. I have a P2mmx at 300mhz w/ 256mb. & I'm running xp home. I was wondering if the gforce 4mx 420 is better than my currant nvidia riva tnt And if it is compatable with my computer?
 

Answer:What's better? nvidia riva tnt or gforce 4mx 420?

A Quick Question...

I'm new to the computer world & looking to upgrade my video card. I have a P2mmx at 300mhz w/256mb, on a Intel I440LX &
i'm running XP home. I was wondering if the gforce 4mx 420 is better that the nvidia riva tnt. And if it's compatable with my computer?
 

4 more replies
Relevance 66.42%

Recently I bought this new v.card and can't play any games(like Urban Chaos, Age of Empires 2). I just start the game and it automatically exits in a few seconds. Sometimes it does start but then after some time of playing it exits again and the comp. crashes('hangs'). I could play these games with my old card though!
I have already downloaded the latest drivers and really don't know what to do else. Could it be that these games don't 'know' this card and don't want to work with it or what?
 

Answer:Nvidia Riva TNT 2 Pro problems...

some tnt2 ultras have voltage problems with the agp supply on older motherboards. Not sure which chip the pro uses but if it's the ultra then this could be the problem.
 

2 more replies
Relevance 65.6%

Hey, guys. What NVIDIA driver (Detonator or Forceware) should I use under Windows ME with a Riva TNT2 Pro to get the best quality and performance? I am asking this because I noticed that (under RPGMaker 2000), using the original Windows drivers showed no flicker. But, when I used the 45.23 drivers, sure they were fast in Direct3D applications. But in RPGMaker, flicker starts to appear. It's not so bad that it is unplayable, it's just really annoying. THANKS IN ADVANCE!
 

Answer:NVIDIA TNT2 Drivers

You should use ancient Detonators. Something in the 1x or 2x series maybe.
 

4 more replies
Relevance 65.6%
Answer:nvidia riva tnt264 drivers

i am using riva tuner to tweak my graph.card and this tells me i'm using detonater xp version 29.42 is there a better version for games (medal of honour). anyone with same card as me and pent2/350mhz 128mbsdram win2000pro which drivers are you using. know any tips?

4 more replies
Relevance 65.6%

My video display has a terrible flutter that is getting worse. I am worse than a novice about drivers/driver updating and bios updating. I've done research on updating drivers, but get nowhere. My display driver for my Dell with Windows XP Pro is NVIDIA RIVA TNT2 Model 64Pro (4.07.02).
Does my problem lie with my driver, bios, or what?
Any help would be greatly appreciated!
 

Answer:NVIDIA RIVA Driver Problem or Something Else?

8 more replies
Relevance 64.78%

What chipset is better(faster) ?
NVIDIA TNT2 or GeForce 2-200

If you could buy at the same price these two video cards
1.) SVGA ( Chipset : NVIDIA GeForce 2MX-200) 64MB AGP R TV-OUT
2.) SVGA ( Chipset : NVIDIA TNT2 M64) 32MB AGP R

what would you choose ??
 

Answer:GeForce 2Ì×-200 Vs NVIDIA TNT2

I'd go for the GF2 mate
 

1 more replies
Relevance 64.78%

I have a Compaq Presario 5000 (5WV373) that had Windows ME and was working properly. I just formated the computer and installed Win 2K as a default installation. Everything is working properly but the Nvidia card. I couldn't install it. I only have 16 colors, 800x600.
This Nvidia card came within the Compaq and I lost all the installation CDs so I was at Nvidia.com and I download the "56.72 winxp nVIDIA DRIVER" but it doesn't work. I execute it but when it finish nothing happened, the driver is not installed, the Nvidia card doesn't work.
I would appreciate any help to make this card work!!!!!

Thanks in Advance.

Please respond with copy to [email protected]
Kenneth
 

Answer:I Can't install my Nvidia TNT2 M64 PRO 16MB in W2K

You'll need to download the riva drivers, not the geforce ones. Uninstall the geforce drivers BEFORE you install the rivas.
EDIT:I am wrong. I used to have a TNT card but it was years ago. Sorry.
 

3 more replies
Relevance 64.78%

I am having a prob I cant seem to troubleshoot. Against lighter backgrounds, I am getting faint dark lines going horizontal!Its not the monitor as that is brand new.HELP!!!!

Answer:NVIDIA Aladdin TNT2 Problem

Install proper drivers.

7 more replies
Relevance 64.78%
Relevance 64.78%

Here's the deal: I have a piece of software called Gigastudio which conflicts severely with my TNT2. I wonder if perhaps instead of replacing the card, an alternate set of drivers would be an option. The only graphics stipulation is that it needs to be 16 bit in order for me to run Cubase. Thanks a bunch!
P.S. Here is the exact brand name of the card.

Nvidia TNT2 M64 32MB 4X AGP
 

Answer:Alternate drivers for Nvidia TNT2?

16 more replies
Relevance 64.78%

Hey,

At the moment I have in my machine a Voodoo3 2000 PCI. I havejust received off a friend a nVidia Riva TNT2 M64.

Which one is better for 3d gaming?

also if anyone knows how much memory does this card hold??

Thanks
 

Answer:Voodoo3 2000 VS nVidia TNT2 M64

Also....if I do use the TNT2 what do i run my games in (UT) openGL or D3D?

(I have heard that OpenGL on TNT2 cards is dodgy?!?!)

Thanks
 

12 more replies
Relevance 64.78%

i have a nvidia riva tnt2 model 64 card and a 15" NEC LCD monitor

i have these horizontal lines running across my screen that are like 'shadows'. like when im using microsoft word, or typing in any white textbox, there are horizontal lines that run from the text across the screen.

i've tried uninstalling/re-installing drivers a million times, changing refresh rates, making sure the card is plugged in and all cables are secure, etc. i also know it isnt the monitor because it works perfectly on my roommates computer. i also made sure to properly clean out old drivers before changing them.

any help would be appreciated!
 

Answer:Nvidia Tnt2 Vid Card Problems

This sounds as thought the card is faulty. Try it in your mates machine and see what happens.
 

1 more replies
Relevance 64.78%

folks
I have a PCI [not PCI express not AGP] Nvidia TNT2 card and need it to work in a dell dimension, Windows XP Home Edition.
I did what anyone would do... installed it, went to Nvidia site, looked up the right family [TNT2] for the OS, and downloaded this MONSTROUS 40MB file. When I run the install program it simply says "did not detect any appropriate hardware" and shuts down. The card does come up with the correct ID at boot time [correctly identifies what it is] and, with windows in SAFE MODE, the display is driven off the Card, not the onboard. The Windows OS again correctly shows the card in the Device manager [no bangs... calls it by the right names etc.]. So all that looks good, but absent the real NVIDIA drivers, when I boot into normal Windows XP, not safe-mode, it acts as though it is a two monitor rig. and unfortunately, the display from the nvidia card seems to be the #2 display, thus not exactly usable. Then I go to reboot, and the next time, it will not even display to the monitor once windows XP boots. very frustrating.

I NOTE that the Dell Dimension 3100 bios does NOT allow the option of shutting off the onboard. it only gives two choices "onboard" or "Auto".

So, anyone have a clue what's going on here?
 

Answer:Nvidia TNT2 64 Vid driver that works???

OMG...Used to have one of these cards and it lasted about 1 hour and i trashed it. My diamond viper card was more powerful and am still using it to this day in my backup rig. Am thinking the last drivers that work are the 9.04 or something series. As far as your mobo i have no clue on a dell how to disable on board video...Goodluck
 

5 more replies
Relevance 64.78%

Hello all;
my son deleted my hardrive (accidentally of course). I reloaded windows 98se and downloaded drivers for my Nvidia tnt2 model 64 video. But now I it only works in minimal mode. I'm using a NEC MultiSync E750 monitor with the latest drivers as well. With the old drivers (sored on the hard drive of course) everything worked fine. Any suggestions would be appreciated.

Ed.
 

Answer:Nvidia tnt2 model 64 Problems

when you re-install the win98se did you install the chipset for the motherboard the intel .inf drivers ???
 

1 more replies
Relevance 64.78%

I usually have OpenGL display problems with programs running fullscreen (usually blurry text in menus, etc.), for example the image attached is from OpenGL Extension Viewer (I captured it from the test window), I have the most up to date drivers and software, any ideas?

Nvidia Tnt2 32mb (53.03 winxp drivers)
 

Answer:OpenGL + Nvidia Tnt2 Troubles

You should try an older driver - the new ones have issues.

Try an early 40 driver or even the oldest one they have: http://www.nvidia.com/object/winxp-2k_archive.html

The driver should be listed in Add/Remove Programs.
 

1 more replies
Relevance 64.78%

Hi,
I've installed TOCA 2 and I can't get past the "setup" page. The page reads as follows:

Device:
NVIDIA RIVA TNT2 Model 64/ Model 64 Pro

Version No.
0.00.00.0000

The game manual says I need
4.11.01.0188 or a later version.

I've downloaded the latest drivers from NVIDIA, but I still have the same problem. Can anybody help please??
 

Answer:{RESOLVED}TOCA 2 - NVIDIA RIVA problem

8 more replies
Relevance 64.78%

Hi people

im having trouble with a riva 128 zx card. i originally had a 64 tnt card and replaced it with the 128 but now my pc wont recognise either of them. the computer turns on fine but the monitor is not responding to either cards. both the monitors are fine, cables etc but they wont respond to the cards. i tested the 64 on another pc and its working fine, but my main pc wont accept them.

ive got a p4 1.6 ghz
256 mb ram
cd-rom
dvd
and other typical stuff but i can seem to figure out any obvious things that are causing this to happen.

You'd probably need more info than that so just ask but i can't remember EXACTLY whats in the pc. I can't look at the specs because no monitor will work.

any help would be great, this is driving me mad
 

Answer:nVidia RIVA 128zx-monitors won't recognise

6 more replies
Relevance 64.78%

I have recently built a cheap machine for my son to play BF1942 on. IT has a problem with the graphics card and say that windows will have to shut down to stop any damage being done. It says its the graphics card drivers but i can't sort it out. Any ideas anyone
 

More replies
Relevance 64.37%

Is there anyway for me to run World of Warcraft on an unsupported Video Card (NVidIA TNT2) without spending money on a new card? I spent fifty dollars on the game and now I"m stuck! Help?>??
 

Answer:Please help me- Video Card/Driver NVidia TNT2- WoW

you could always return the game. have you actually tried the game, and seen it fail. if so, you'll need a newer video card.
 

5 more replies
Relevance 64.37%

Hi Guys,

First time here and I'm more desperate than a virgin on his wedding day. I just purchased Rainbow Six 3: Raven Shield (hoping to split a few wigs today). I found out that it does not support my video card (gulp!) Is there a patch or anything that I can do besides buying a new video card?

Thanks
Vision
 

Answer:Raven Shield vs. Nvidia TNT2 Pro AGP Card

Unless someone has made a third-party patch that somehow simulates hardware T&L, then no, I'm afraid the only way to get it to work is by getting a newer video card.
 

2 more replies
Relevance 64.37%

MB ASUS CUSL2-C
OS Dual boot WIN98SE/WIN2K
384MB Ram

OK, here goes. I have a 32MB Nvidia TNT2 Ultra video card. However MOST of the time, the system won't recognize it as anything other than a standard VGA card. Every now and then it'll actually show as the correct card and when that happens it works GREAT (for a while), then all the sudden it's back to standard VGA again.

This happens in 98SE and 2K, I have 2 older Rage cards that I have no trouble with. Unfortunately I DON'T have another machine that I can put this card in right now.

Have all the latest drivers (that I can find) for everything, problem has persisted through a reformat and reload.

Any help at all appreciated.

(edited for spelling)
 

Answer:NVIDIA TNT2 Ultra shows as standard VGA

If your system is not HAVING issues with your other cards, then your TNT2 is the cause.... its an odd problem you have.
 

1 more replies
Relevance 63.55%

Hi - I'm new to the boards and have a question I hope someone can help me with. I have an old Dell Dimension 4100 that is running windows me and it has an nvidia tnt 2 video card. My son recently purchased Call of Duty and it doesn't seem to work on this system. I keep getting an error message that I need to upgrade my video card. I think I need a pci express card, but I'm not sure so my question is how do I figure that out and can anyone recommend a video card that is not too expensive? The system is 6 years old and I really don't feel like investing a ton of cash into it. It does have 256 mb of ram, that I know as well as an pentium 3 processor, 20 gig hard drive (small I know in this day and age) and is running @ 933mhz. Thanks in advance for the help.

Laura
 

Answer:Upgrading an nvidia tnt2 card on an old dell 4100

You need an AGP video card.Given the age of your computer you probably only have an AGP 4x slot so I would recomend an ATI Radeon 9200 or 9250. anything more powerfull than that wouldn't give you any significant improvement due to the speed of your processer and slot. upgradeing your ram to 512 mb wouldnt be a bad idea either.
Video card:
http://www.newegg.com/Product/Product.asp?Item=N82E16814125204

http://www.newegg.com/Product/Product.asp?Item=N82E16814102388

RAM:
http://www.newegg.com/Product/Product.asp?Item=N82E16820153101

http://www.newegg.com/Product/Product.asp?Item=N82E16820136009

regardless of what video card and ram you get that game will probably only run on medium settings due to your processer.

ps:If you would like to upgrade your HDD:

http://www.newegg.com/Product/Product.asp?Item=N82E16822144102


http://www.newegg.com/Product/Product.asp?Item=N82E16822144107
 

7 more replies
Relevance 63.55%

Video Lock-ups / CD-ROM Locking problem

CPU Information

Asus A7A266Mother board with audio & AMD 1.2 GHz Processor combo,
256MB/133 Ram chip,
NVIDIA Riva TNT 2 32MB M64 APG video card.
Fujitsu 30 gig HD Re-formatted with a clean copy of Win 98se installed
50X speed CD-ROM
HP 9100i CDR
Two Kingston NICs
Modem supplied with Mother board
Windows 98se.

I have experienced the following problems:

1. During boot-up, the windows logo flickers one time every time its booting.
2. The CD-ROM will some times hang and lock the computer.
3. While running NASCAR 4, & Need For Speed. The video blinks out. Its like the screen freezes and then runs ok. This happens every 3 to 4 seconds. This makes the game unplayable.
4. I have seen when I was using the CD-ROM the CPU locks up and if I open the CD-ROM door the CPU will run again. Close the door and the CPU lock up again.
5. Every time the CPU lock up due to the CD-ROM (Ctrl/Alt/Delete) takes forever and it seems to crash the system so bad I have to hit the reset.
6. I have seen Windows Explorer screen flicker every once and a while.

Trouble shooting steps taken:

1. Installed latest driver for the TNTm64 video card ( Still having the same problem)
2. Installed a Voodoo 3-3000 video card and drivers. ( Still having the same problem)
3. Minimized all the graphic settings in NSACAR 4. Un-checked all items possible to achieve smooth video. ( Still having the same problem)
4. Removed both network cards and modem. ( Still havi... Read more

Answer:NVIDIA TNT2 M64 lock up problem on ASUS A7A266 MB

What are your irq assignments, any conflicts, what's sharing with what.

Device manager, any conflicts, ms-dos compatabilty mode drivers note, etc.

Anything running in the background to cause a conflict.

Directx diagnostic, any problems reported.

Is your cdrom on the same ide channel as the hard drive, if so change it.

One thing you might try but it's a strech, download sisoft sandra and run the benchmark program, once in awhile it will show a problem and how to fix it. I haven't used it for a long time but it use to have a diagnostic that would check the systme bus, agp bus, etc.

you should be able to get it at http://www.tweakfiles.com

Will keep my eyes open if I run across anything on some of the gaming sites.
 

1 more replies
Relevance 62.73%

Title says it all.

Any info about how to do it, such as :

1. software needed
2. cooling need + how to fit it
(3. Possible 3D Mark score)

Also I have a Winfast Geforce 2 MX 100/200. Any similar info about clocking that would also be appreciated.

The computer that runs my TNT2 is a custom made PC. It has an Abit KT7A Raid, 256 MB of Ram and a 1200Mhz unclocked Thunderbird AMD. The card on it at the moment on gets a score of 700 in my 3D Mark tests.

The computer that runs on my Geforce 2 is a Dan computer with a Pentium 1.5 Ghz with 256 mb of ram and a new 845 chipset motherboard. This graphics card gets just under 1000 points at the moment in my 3D Mark tests.

Thanks for any info!
 

Answer:Any Info/Suggestions on nVidia Riva TNT M64 32mb graphics card overclocking?

http://www.tweak3d.net/articles/gfmxoc/

mx overclocking guide

Will look around for the m64 but I don't think it will get you much, your scores seem low but I haven't run the bench for quite awhile and don't remember what I got with a ddr

downloaded it just for chuckles 2512 at default settings.
P3 [email protected], 512 PC133 cl2 ram, Prophet DDr
 

2 more replies
Relevance 61.09%

Hi guys. Just a question. An easy one I think. Right now, I'm using an nVIDIA TNT2 Model 64 16MB video card. This video card works pretty well, but could be better. Especially with games like Quake III Team Arena. I am thinking off upgrading to a nVIDIA TNT2 Model 64 32MB video card. Since the only difference between the two cards is that one has more memory. Can I use the video card driver already installed if I switch from the 16MB card to the 32 MB card?

Computer is a Systemax Athlon 1Gh W/Windows ME. X4 APG slot.

Thanks
 

Answer:Changing video. TNT2 16MB to TNT2 32MB

16 more replies
Relevance 57.4%

I bought this graphics card for installation in an older P2 machine. Whne the card is in the slot, the machine does not post. Is the card pooched? or is there someting in the bios that prevents the card from working. The old card work fine, and I just wanted to "speed up the old machine" a little.

Any suggestions?

Answer:NVIDIA TNT2 M64 16MB SVGA Graphics Card "PCI"

So when you put the card in computer does not boot?If not try another PCI slot if the same thing then the card is bad.

2 more replies
Relevance 57.4%

Hi, I purchased this graphics card and installed it in an older P2 machine. All I get is black screen...no boot. Support page says to try different slot, so I tried them all. Suggestions? or is the card pooched?
 

Answer:NVIDIA TNT2 M64 16MB SVGA Graphics Card "PCI"

16 more replies
Relevance 54.53%

I have a BFG 6600gt OC video card that has a core clock of 525 and a memory clock of 1050.

Riva tuner is reporting the that the core clock is 300 MHZ and the memory clock is 1050 MHZ. Why the discrepancy in the core clock reading?
 

More replies
Relevance 54.12%

Ok, i recently installed the new d&d game, neverwinter nights, and discovered it requires either a TNT2 or GeForce2+. Well, i obtained a TNT2 pci video card and replaced my old ATI Rage video card with it. Shortly after, i discovered that with this video card installed, suddenly my modem doesn't work. I know that the TNT2 has to be somehow conflicting because i took it out and put the Rage back in, which is how i am posting this... Anyway I'm running win98 with a 450mhz processor and 128 megs of RAM. Can somebody please help me figure out how to get my modem to work with the TNT2 in?? I'd like to be able to play my game and get on the internet without having to shut down and switch cards every time.... Please Help!
 

Answer:[SOLVED] TNT2 conflict w/ modem PLEASE HELP!

In my opinion, place the new card back into your computer and boot up once normally. Record the settings you need for your modem to dial up to whatever your using it for to be safe.

Now reboot and go into safe mode. Once it's running in safe mode, go to settings, control panel, system icon, then into device manager. Under Display Adapters icon, remove all that are displayed. Go to the modem icon and do the same thing. Close everything and shut down and restart. Allow windows to autodetect the video card and the modem, this should reinstall the drivers and correct the IRQ problem (I'm guessing that what's shutting off the modem). Post back what happens.

You do have the proper drivers for your brand of modem and the TNT card before executing this information, right?
 

3 more replies
Relevance 45.1%

I have this windows update as optional,

nVidia - Display, Other hardware - NVIDIA GeForce 9200
Download size: 152.6 MB

running windows 7 - do i need it? it seems rather big at 152.6mb
 

Answer:Solved: nVidia - Display, NVIDIA GeForce 9200

9 more replies
Relevance 43.46%
Question: Riva

Hi does any one know where I can find a driver for the Nvidia Riva tnt m64 for win2000
 

Answer:Riva

Try this:

http://members.driverguide.com/driver/detail.php?driverid=60624

It's for XP but says it probably works with 2000.
You'll need to register with www.driverguide.com. It's free.
 

1 more replies
Relevance 43.05%

Hi Guys, I'm using my moms computer until I get mine all set up, I was wanting to play a game online ( MU Online ) a online rpg, and Its a lil laggy, I noticed that I can not turn on 3d Acceleration in dx Diag, I read somewhere that you could turn it on when you turn the color to 16 bit, so I did that, rebooted and still can not turn it on. I did however did download a new drive that let me turn on direct draw acceleration, before I installed the driver the GFX Card did not even turn up on DX Diag. I'm using windows xp. She asked me If I would put some more ram in it and a bigger hard-drive. Its a Pentium 2 350. I dont know what it can handle but my Uncle is the smartest guy I know in computers, and we tried a 80 gig hdd, to big, so we tried a program still to big, I'm also going to spend some of my own money to buy a little better graphics card. dunno what the mother board can handle in gfx either. So any help would be appreciated.

Ps- I also read somewhere that the driver for the riva was tweaked to where you could turn on 3d acceleration for a certain game.
 

Answer:Old Riva 128 GfX Card

I don't really know what you're asking here, unless you just want upgrade suggestions, in which case I'd say just upgrade to a completely new system. You can find something for a couple of hundred bucks that will still be a huge leap up from a P2 350.
 

2 more replies
Relevance 43.05%
Question: Riva TNT drivers?

What is the latest driver version for this Riva TNT card, and where can I get it?
For some reason, in Windows ME, it keeps displaying 16 colors. And no, I don't have time to install Windows 98SE.
 

Answer:Riva TNT drivers?

Nvidia.com is the place to look.
 

3 more replies
Relevance 43.05%
Question: Riva Tuner

i play a few games on me pc but i need a new graphic card too play my links golf..but when i went too a site too play a game i was told for 3d accelerator nvidia users ..try downloading - Riva Tuner too help performance in the game..does any 1 know what it is or does? and wud it be ok for what i have...nvidia vanta lt.ty.

Answer:Riva Tuner

Swanny, riva tuner is an application that allows you to overclock your graphics card and an excellent utility at that. It's not for the faint hearted and if you don't know what your doing with clock speeds, etc leave it alone.

2 more replies
Relevance 43.05%

when i overclock my graphics card in riva tuner there a tab where if i press down on it it gives me a choice of standard 2d, lower power 3d, and performance 3d. whats the difference? does that mean my overclockin will only effect 2d stuff if i have it on that? whats the deal
 

Answer:Riva TUner help please!!!

Why not just continue on this thread ......

http://forums.techguy.org/hardware/479191-overclock-my-asus-6600-128mb.html
 

1 more replies
Relevance 43.05%
Question: Riva tnt 2 card

Well i am trying to search for nvidia riva tnt pro model(32MB AGP) driver.....whenever i visit the n vidia website and do a scan ,,it says i have the latest drivers....when doing it manually by selecting legacy drivers i download the 71.89win2k version ( latest ) and installed it........if i try to reinstall again it tells me that compatible hardware not found( i can see the card details ind evice manager which prolly means the card is detected and its a nvidia riva card) )

here are some of the instances which make me feel that theres some problem with driver or video card
1.The screen resolution adjustment screen in gtavc is disabled( like iam not able to click or customize)

2. I cannot play counter strike condition zero in open gl mode ( plays only in safe mode )....few of my favourite maps wont load in safe mode ,it needs open gl mode
or is it only this much the card can do---i remember playing in open gl mode before 4 years with this card........not sure though.

specs P4 1.8GHZ..256MBDDR..WINXPSP2..

More replies
Relevance 43.05%
Question: riva tuner

Well, Ive never used it before, and cant figure out how I can use it to overclock my new 9800Pro.
Feel kinda dumb asking, but, alas, I must.
Thanks all.
 

Answer:riva tuner

On the Main tab, under Target Adapter -or- Driver Settings, click the little triangle to the right of the word Customize... then click the leftmost icon (the one that looks like a video card) in the little toolbar that appears. That will bring up the Overclocking dialog.

I know Riva Tuner works for Nvidia cards, but not sure if it does for ATI cards...
 

3 more replies
Relevance 43.05%
Question: Niidia riva tnt 64

can anyone tell me were i can get an updated driver for this for windows XP as it seems to install its own drivers which is a pain

Answer:Niidia riva tnt 64

click here

2 more replies
Relevance 43.05%

Can anyone find a 30 mm x 30 mm x 10 mm fan online (with 2 wires) to replace that on a RIVA TNT 2 M64 / 64 Pro?or suggest a cheap replacement for the RIVA TNT 2 M64 / 64 Pro?

Answer:30mm fan for a RIVA TNT 2 M64 / 64 Pro

click hereI use 1 of these on my GeForce 3Ti200 in place of the stock heatsink/fan combo, it should easily cope with the heat from a TNT2 (my old TNT2M64/64 Pro didn't even have a heatsink. It's not as cheap as a fan but I don't think you will be able to get what you want easily.

3 more replies
Relevance 43.05%

I'm runnung Win2K and I have a (rather old) Riva TNT PCI video card. Windows 2000 (RTM)ships with RIVA TNT drivers for DirectDraw and all 2D support, unfortunately, the Direct 3D apparently doesn't work correctly.

I've been to driverguide website and downloaded countless "Win2k" drivers for this card....some work, others don't.

I've also been to Nvidia's website and DL'ed latest drivers and still having direct Draw errors . Oh yeah , I upgraded to direct9X.

Anyone out there have this card and Win2K??

Any issues that you know of ????
 

More replies
Relevance 43.05%
Relevance 43.05%
Question: Tnt2 M64

I've got one of these cards which is curently gathering dust because I'm afraid to put it into a machine....
Trouble is, I put it down to fiddel with something else and while I wasn't watching the bloody cat chewed through the cable that connects the fan to the actual card!!!

The fan must be there for a reason... but does anyone have an opinion as to whether it's absolutely neccessary for the fan to be functional?

It's a 32mb AGP version BTW.

Cheers!
Andy
 

Answer:Tnt2 M64

fan good

cat bad

maybe the card dies without it...maybe you have enough circulation to overcome it not working.......can't ya just hook the wires back together?
 

3 more replies
Relevance 42.64%

Just switched back to EVGA from an ati card but riva tuner won't allow me to configure a profile to adjust fan speeds. Is this a problem with the 263.09 drivers?
 

Answer:Riva Tuner not supported in 263.09

Sorry guys, this would've been more appropriate for the drivers section.

Can it be moved?
 

8 more replies
Relevance 42.64%

hi, wondering if anyone can advise?, I have a pny 9800gt and am having trouble keeping the selected fan duty % sticking while playing games( i have set it up to be fixed at startup and this works fine), but when i go into a game it goes back to the default setting of the card (39%), i have tried direct control and low level fan control but neither of these stick for very long before going back to the default. I have rolled back to the previous gpu driver that is recommended for riva but this doesn't change a thing..

Is there a way to solve this without going into bios?
 

More replies
Relevance 42.64%

Hi, I recently bought a new gpu; a GeForce 8800 GTS 640mb. I've played several games with it and I thought I would be able crank the graphical settings on all my games to the max and not lose any fps; well not as much as I would with my old card . Anyway to go with that card I got some 2GB PC6400 ram. The only thing thats sort of bad on my pc is the processor which is a AMD 3800 X2. Whenever I crank up the Anti aliasing levels on my PC all my games take major hits in their fps. For a while I've been thinking that it was because AA is calculated by my processor that it went so slow, but I also thought that the processor was only really concerned with loading and calculating certain other aspects of the software, with no real influence on the FPS of a game. Anyway I installed riva tuner and I got the following message:

$000000000f PCIE link width : 16x supported, 8x selected

Is this something that is hampering my gpu from processing at its normal speed? I've treid looking in the BIOS but there was no option to change my PCIe slot to 16x. Anyone know what I can do? I've been planning on buying a new processor anyway, but if the problem is not the processor what is?

Thanks for any help,

Conrad.

Answer:Riva tuner question

My guess is that your board only supports pci-e 8x while the card is 16x. That cpu is probably also a pretty decent bottleneck in the games.

9 more replies
Relevance 42.64%

I use this to tweak the colour settings on my monitor. The settings are:Brightness -10Contrast 10Gamma 0.95I find the current settings are good in general but does any one have any alternative suggestions that could be better?

More replies
Relevance 42.64%

Blue yonder pages only show heading no other graphics . I updatedthe driver all back to normal but when i close down screen returns to no graphics.it appears the update works but the driver is lost at shut down.wn xp pro sp2 all other sites and pages ok started when BY upgraded there home page
Douglas
 

Answer:nvida riva tn2 driver

Slow down, use commas and periods please, maybe an occasional capitol letter, your message is very hard to understand. Try using the Forceware drivers, or have you?
 

4 more replies
Relevance 42.64%

hi. i installed riva tuner and i can say that it is very confusing for a newbie. i searched the forums but i still can not find anything that will help me learn riva tuner. in the main tab there is driver settings and also the target adapter. there is also the power user which is not for mortals like me. the help menu in riva tuner does not seem to be newbie friendly. is there such a thins as riva tuner for dummies that can guide newbies on how to use riva tuner? thanks.
 

Answer:riva tuner for dummies

See this: http://www.tweakguides.com/NVFORCE_1.html
 

1 more replies
Relevance 42.64%

Hi

I'm having some problems with RIVA FLV ENCODER, until recently it worked fine, now it wont work, I have uninstalled, and manually removed from the registry and re-installed, i have tried using as admin, and tried different compatibilities, I just cant make it work!

Im using Vista Ultimate 64x

This is the details of the issue:

PHP Code:

 Problem Event Name:    APPCRASH
  Application Name
:    Riva FLV Encoder.exe
  Application Version
:    2.0.0.4
  Application Timestamp
:    421c4813
  Fault Module Name
:    StackHash_aa18
  Fault Module Version
:    0.0.0.0
  Fault Module Timestamp
:   ... Read more

Answer:Riva FLV Encoder APPCRASH

problem solved, the Fault Module Name: StackHash seems to be a DEP error apparently

I fixed by turning off DEP for this program!

Hope this helps anyone else in the future

3 more replies
Relevance 42.64%

I've tried finding answers over the net, but there's (so far) no one addressing my concern.

Riva Tuner sensors register two gpu temps and the first one is 8-10 degrees higher than the second. What exactly am I looking at?

I expect two readings on my 4870x2, but is this normal with my 285gtx?
 

More replies