Computer Support Forum

Non responsive Key board

Question: Non responsive Key board

I have An ECS K7S5A Pro mother board with a keyboard that won't respond. This is one of the stangest issues I have have ever come across dealing with keyboards. When the computer boots it will boot into Windows XP and the keyboard will not respond but the mouse responds and device manager shows no keyboard listed and no conflicts. Then when you reboot the computer and try to access the bios the the key board still won't respond and the computer boots into Windows as before. No "no keyboard" errors are posted on boot up. I have tried all of the standard trouble shooting techniques (trying different keyboards switching cables etc...). Is the anybody that has come across a systoms like this? I am reluctant to condem this MB because I don't know for sure whats wrong Thanks Scott

Relevance 100%
Preferred Solution: Non responsive Key board

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Non responsive Key board

Is the keyboard standard PS/2 or the USB kind ( too lazy to check on the specs of the board).
But let's assume that the keyboard is the PS/2 kind. If you tried the usual "song and swap" and still no response, then it's the board chip that is messing up. I would give it a last shot, but looking on the mobo and trying to clear up the CMOS if you haven't tried it yet.

2 more replies
Relevance 52.89%


Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon™ 64 X2 Dual Core Processor 5600+, x86 Family 15 Model 67 Stepping 3
Processor Count: 2
RAM: 3454 Mb
Graphics Card: NVIDIA GeForce GT 430, 1 Mb
Hard Drives: C: Total - 305234 MB, Free - 112205 MB;
Motherboard: ECS, Nettle2
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Disabled

Hey everyone.

So my PC began acting up and I have a feeling it started when I was looking for video editing software and came across a video editor called "softonicdownloader_for_Windows-live-movie-maker.exe" I'm sure it's a virus or something because problems with my PC began shortly after getting this.
I deleted and uninstalled what I could, went into safe mode and ran the latest updated version of malware bytes. It got 5 infected files that were deleted.

After doing so, I had little success. Here are still the issues with the PC

#1 Desktop and start menu programs won't respond. Can be clicked and the arrow with hourglass will show up, but with no response. Sometimes clicking on them will freeze and lock up. Sometimes they will, but it is only after several manual shut downs. If it does respond (such as clicking on internet explorer), upon closing out the program it will not respond again without a manual shut down.

#2 Boot up is a lot slower, will stay on "Loading your personal setting... Read more

Answer:Slow start ups, shut downs or non responsive. Programs will freeze up or become non responsive

Greetings and Welcome to The Forums!!My name is Gringo and I'll be glad to help you with your computer problems.I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the ... Read more

4 more replies
Relevance 52.89%

xp home edition, avg free download,firefox default browser... scanned with secunia p.s.i. for latest pathches/upgrades. windows firewall with avg used for security.
Problem 1) left click slow to respond or non resposive .i must double click by tapping touch pad. right click seems to work ok.
2)wmp will not open when dvd disc inserted into player or wmp opens with half the screen NOT displayed and still unresponsive. (WMP WILL WORK when i play video from my downloads)
3)firfox(default browser) AND IE browser somtimes become unresposive and crash. OR are very slow to download a website.
4) when i "X" out of a window the screen will some or most times close slow..screen will close from top to bottom slow like a curtain closing!
i updated and scanned with avg anti-virus( free download version). problem remains. Please help tech titans!!!!!

More replies
Relevance 45.51%

which one would be better for fps gaming (more specifically cs:s)

since they give you the option of changing the responsiveness, i'm guessing this doesn't matter? or does it?

i have a A4 tech mouse that's more very sensitive, while a logitech optical mouse (i think nubius has it, he recommended it to me when i asked for a mouse) that's less sensitive

which would be better (or it doesn't matter?)

Answer:Mouse- More responsive vs less responsive

More sensitive.

4 more replies
Relevance 41%

amd xp 1700(palomino) on a ga-7vt600, winxp sp2

i upgraded video/ram in my computer and now i can't even get the old(what was replaced) stuff to work. here's a few things to list:

install new vid card, update drivers/settings, reboot no picture to monitor.
unistall/reinstall card, boot and monitor has picture.
install another gig of ram, boot no picture.
take new ram out, boot no picture.
take new card out, put new card in, boot no picture.
take new card out, put old card in, boot no picture.
take all memory out, try known good stick in all slots, boot and no picture.
put all back in, boot, no picture.
turn power on and watch the led fans run on my 15lb paper weight.

it's a never ending combination that i've tried here and i cannot get a picture on this monitor. i've swapped monitors around and all are good, i've put components from this computer into another computer and they all worked. something is not letting this thing boot up, i get no picture to the screen and no beeps sounds or anything else, i turn the computer on and you hear the fans, hard drives, and burners powering up and everything, but there is no picture going to the monitor. it sounded like bad memory because i ran into a case of that before but all the components still work when placed into the other computer. my last guess is the board has gone sour. i was reading other posts and people have mentioned the power supply, but where do i check that at? it's a codegen 350w ... Read more

Answer:Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread)

11 more replies
Relevance 41%

I have an Ideapad Z510 without backlit keyboard.
I have ordered a backlit keyboard online.
The problem is that the laptop does NOT have a connector for the backlit keyboard.
I have tracked the possible solution to the part:
AILZB ODD Board W/BL PN:90004470
which probably means with backlit connector.
There is also the part AILZB ODD Board WO/BL PN:90004471, but this probably means without backlit connector.
My question is that, is this the correct part to order? It's a PCB that connects to the motherboard and the optical drive,
but also houses the socket/connector for the backlit keyboard.
My PCB looks like the one in the attached photo.
Can some user/Lenovo tech confirm that the part AILZB ODD Board W/BL PN:90004470  houses the mentioned connector on the PCB?
Thanks for your responses.
Link to picture
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

Answer:Z510 - trying to find a backlit connector board (AILZB ODD Board W/BL PN:90004470)

There are only two Parts for this, those you gave
10 AILZB ODD Board W/BL 9000447010 AILZB ODD Board WO/BL 90004471
The Photo you posted, That port you're saying is present on the Maintenance Manual Photo

This one seems to have the port.
I believe that it is what you're thinking that the AILZB ODD Board W/BL 90004470 should have the Port you need.
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 40.18%

I have the following desktop that just died on me one day...i was told my main board died.  It has the i3 processor and i was wondering where i can get a replacement board only?  not sure what model or brand to look for so that it drops in my case....any help would be appreciated, thanks!
Lenovo H430

Machine type 2558

Serial ESxxxxxxxx
Moderator Note; s/n edited for member's own protection

Answer:where can i get a replacement board (motherobard, main board) for H430?

hi polyskilz,
Thanks for Using Lenovo Community Forums!
Serial number are not allowed to be posted on threads for your Security purposes.
Kindly send the Serail number to me through Private message.
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Relevance 40.18%

my hp mother board lights up the green light on the board but it doesnot power on

More replies
Relevance 40.18%

Hi.Can anyone help with the following problem please? I bought a secondhand Viglen branded PC with its HD wiped and reformatted. The plan was to take the HD from our old AMD-based Time PC (AMD 1Ghz), put it into the Intel P4-based system (1.7Ghz) and give it to my son to play games on. He's young, doesn't need a 'gamers' PC as such and as long as the PC is faster than 1.5GHz, has an Nvidia card (I have a spare FX5200) and a 16 bit soundcard all should be well. Except it isn't! The PC won't boot from my existing HD. I've tried a fresh install to the wiped HD and the PC boots fine, so it's not a hardware issue, but I don't want to lose all the applications and files from my existing HD so I'd much rather use that (both HDs have XP Pro SP2 on them).My guess it that it's a software problem, possibly related to motherboard drivers resulting from changing from an AMD board to an Intel board ie my HD doesn't have the necessary drivers on it to run with the Intel board. Would this seem a logical conclusion? If so how on earth do I get them on there? Most of the drivers from the Intel site are zipped and still are more than 1.44Mb, besides which as the PC won't even boot with this HD in, how do I boot up to get the files on there from say a USB stick?Any help is much appreciated.

Answer:Swapping hard drives from AMD board to Intel board

If you have an XP installation disk (even better with SP2 on it) and can get into the Bios, set to Boot from CD and then do an XP Repair.See:click herefor details of how to do it (DON'T select the Recovery Console in error, choose to Repair).XP doesn't always like a new mobo and a Repair gets over this problem if it arises.I've done this twice with new motherboards and it's been successful each time.

8 more replies
Relevance 39.36%

Hello All,

I've been having this issue while playing games lately. I just got an Intel 2.8Ghz Prescott with 1Gig of DDR ram and I'm now using an ATI Radeon 9950 by Sapphire (256MB DDR). I dont have a sound card so I'm using the one on-board that comes with the Asus P4P800S-X motherboard (SoundMax).
While im playing a game after a reboot, everything is fine for about a minute, then the video starts lagging and lagging and getting worse and worse. Its like it locks up more and more, and the sound cuts alot. To the point that its not even close to being fun playing anymore. The game im playing is Guild Wars which requires alot less than I have. I also talk on Skype at the same time and when I'm fighting 4 or more guys, I cant even hear anything on Skype. I have a 3mbps connection on cable. And this is with the game graphics at the lowest.
Now get this... If I disable the audio in the Bios, and load up the game with full graphics... smooth nice game play... I've tested playing a long time and its perfect with no lag at all. Now I'm guessing that is pretty conclusive... Should I get a Sound Blaster Live! 5.1 or could it still be something else? Conflicts? Im also running windows xp sp2.

Thanks for taking the time...


CPU: Pentium 4 2.8GHz 800Mhz FSB
MOTHERBOARD: Asus P4P800S-X Intel Chipset 800Mhz FSB
CASE: 450 Watt Power Supply
VIDEO CARD: Sapphire ATI Radeon 9550 256MB DDR... Read more

Answer:On-Board Sound on Asus P4P800S-X Board

Have you loaded the motherboard makers sound chip drivers, or is it just limping along on the default Windows drivers? Might make a difference.

2 more replies
Relevance 38.13%

ok..bought a barebones pc of ebay.Came with a pc chips board..wouldnt post..reset jumpers and after a week of trying to get it to work finally said it was ead and went and bought a MSI KT6 board..thinking this will fix problem..installed cpu and heat sink...installed board into case and installed stick of pc700 ...turned it on..but same thing happened as before with pc chips on cpu and vga card spin but just a black screen...rset jumpers to clear and reset back..tried again..still wouldnt boot...checked to make sure it board wasnt touching case and shorting out..but everything seems to be good there..theres no beep codes...same as with pc chips board..KT6 board comes with a pci slot attachment with 2 usb and led error light..when i start pc the 4 light stay on red .In manual it says that means cpu is not installed correctly or either it is damages..reseated cpu and used some artic silver..but still same thing..and 4 led light stay thinking there was nothing wrong with pc chips board..just like theres nothing wrong with msi board...Could it be the power supply? It has a cheap power the name on weighs almost nothing...Ive tried different stick of memory and vga card..only 2 things that are comman with problem..cpu..a AMD Athlon XP 2600 333mhz and this cheap power supply..The problem has to be with either the cpu or power supply...thats what im thinking.....

Answer:from pc chips board to msi board..same problem

If ur not posting and considering what u've done coupled with the MSI diagnostics it is very likely there is a problem with this cpu.
You need to get a hold of another compatible AMD cpu just to see if u can post, from there u can confront the ebay seller for any restitution ovr the cpu if there was any kind of guarantee offered at all with the purchased items.

1 more replies
Relevance 37.31%

Hi friends,
I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.

i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.

Pl. find me solution to loginto windows and resume work.


Answer:moved windows xp sp2 harddisk from mercury mother board to intel mother board

you cant use the same xp on another motherboard.

2 more replies
Relevance 37.31%
Answer:A 31 Power leds on inverter board are out-all leds on Mother board are ok-No video to display

Welcome to the forum! Any other signs of running, media drive spinning..? Good luck and let us know. 

3 more replies
Relevance 36.9%

Windows GDI update for 2k3. My IIS 6.0 server just started getting flaky on me. Only one website - all ISAPI shutdown - only .asp extensions allowed. URLScan 2.5 installed.

No notice in the logs - just an unresponsive IIS 6.0 server. Doesn't appear crashed, and no insane processes - i.e. no hogs. However, it just goes down - and I have to restart IIS 6.0 to get it running again.

Nothing has changed- except for a patch from microsoft a few days ago that was a "GDI update". Anyone else seeing IIS 6.0 flakyness in the last 2 days?

I thought it might be a DOS or something - but wouldn't a syn attack shut down all my interfaces? Or just the interface in question? What kind of logs would I look for to see some kind of attack? I have Scan Alert which scans my server and reports 0 vulnerabilities. So - at least I have taken care of some of the obvious attacks.

anyone have thoughts for debugging or unravelling this issue?


More replies
Relevance 36.9%
Question: non responsive xp

My computer speed is good in most aspects but runs hot and for the last 2 days will not connect to the internet. Any suggestions?

Answer:non responsive xp

Good morning Sharbrooks and welcome to TSF. I would be happy to assist you however I will need a little more information so that I can diagnose the problem for you.

Here are some questions for you to answer that will help me. Just answer them the best you can and if you dont know an answer its ok. If you already answered anything I'm asking in your first post just skip over it.

1). What kind of computer do you have? Laptop? Desktop? Dell, HP, Ect?
2). Whats your level of experience? Novice, intermediate, expert, or dont know squat?
3). What operating system are you using? Xp Home or XP Pro? Which Service pack?
4). What antivirus are you using? Firewall if any.
5) Please tell us a little about your computer. How old is your computer? Hard drive, processor, ram, video card. Ect.
6). Do you have an Xp disk for this computer? Is it a full installation CD or one from like Dell, HP, Ect.
7). Does your computer have a floppy drive, CD drive, Ect.?
8). Do you have access to another working computer with an internet connection?
9). Did you noticed this problem occuring after installing anything recently?
10). Has your computer done a windows update recently?
11). How does your computer connect to the internet? Wireless, wired, or God FORBID Dialup, LOL. Is there a router in line?

and anything else that might help us help you. Remember we are trying to help from a forum so all we have to go on is what you can tell us.

I will monitor this thread throughout the day... Read more

2 more replies
Relevance 36.9%



First, turn off the caps lock key, unless it is broken too. That is considered rude.To get any meaningful help you need to give some information about the system, how old it is, when the problem started, other problems with it, what happened unusual right before it.So info on the computer including the make and model number and the power supply, including maker and wattage (it's on the side of the power supply inside the case).See below. We'll be waiting for your responses.

1 more replies
Relevance 36.9%
Question: XP non responsive


Earlier today I installed Outpost Free Internet Security, it crashed my network connection so I uninstalled it, then had to perform system restore. Then I opened MS Outlook and PC turned itself off immediately and restarted. Message came up that Windows had recovered from a serious error.
Came on tonight no programs would open, i have put Xp disk in to try and fix and it seems okay(ish).
Other anomaly is that i keep getting message " this computer has undergone significant hardware changes since Xp installed and XP needs reactivation within 3 days. I have had to do this on average once a month including today.
I rang Microsoft to activate over the phone and spoke to a real, very helpful person who also found it strange that it keeps asking to reactivate.

Anyway I have attached the logs from event log, dont know where else to look for errors. Please if you can help i would appreciate it as I am pulling my hair out.


Answer:XP non responsive


i have put Xp disk in to try and fix and it seems okay(ish)

What is Okay(ish) really mean? does the computer work properly, and do all of your programs work? You do not have to include all of the logs. Just instances with a red X the yellow warnings don't mean that much, and the logs are too long to read through.
You can do some maintenance. Go to Start/Run and type chkdksk C: /R and press enter. Then press a Y for Yes and then restart the computer. Check Disk will run at next bootup to fix any file errors. You can also go to Start/Run and type SFC /scannow and press enter. Put the XP CD in and it will replace any missing files from the CD. If you don't have a current Anti-Virus Software, download the free Microsoft Security Essentials (do not have more then one AV software program on your computer at a time) and do a full scan. Also go to Start/Run and type dfrg.msc and press enter, highlight the C: drive and press Defrag Now.

12 more replies
Relevance 36.9%

My friend finally brought his pc into me and asked for my help in fixing it as he has not been able to use it for the last 2 years!!!He blames virus infections and he is not wrong. He keeps getting the dr watson postmortem debugger message and I have turned this off in the registry by changing the Aeopen value to 0 from 1.I have instaled most of the recommended fixes from a previous thread and run sfc /scannow.Over 1500 objects were detected by a-squared and I've not been able to run a AVG virus scan yet as the main problem is that now I'm getting an Explorer error (explorer.exe - application error)and cant open any explorer window or control panel in normal boot, but I can in safe mode.The pc is running windows xp sp2.Your suggestions would be most appreciated please.

Answer:Help with non responsive pc please

The Simple answer is I guess - Startover if the appropriate Windows disk is available.

10 more replies
Relevance 36.9%
Question: Non-responsive HDD

(I'm sending this from wife's laptop so TSG Sysinfo not much use!)
System: 'Advent' tower PC, Intel Core i7 3440 3.4Ghz Quad Core CPU; 12Gb RAM (DDR3); 2Tb HDD (Seagate)(SATA), using Windows 7.

Sequence of events:
1 Attempted to reboot PC following a minor update but PSU did not power up - it wasn't a particularly quite unit so silence pointed to a PSU fault. On removing the cover, the CPU cooling fan was not operating either, confirming no power.

2 The OEM PSU (CWT GPA450P) was not easily replaceable. Having had to replace PSUs in earlier PCs, I opted for a Corsair CX500M. At this point, I committed the cardinal sin of not practising what I used to preach before I retired - having replaced PSUs before, I did not think I needed to RTFM! Having removed the faulty PSU, I unpacked the replacement and fitted the black box in position before noticing that there were some significant differences between the OEM PSU's 'open' cable loom and the Corsair's sleeved loom. One of these difference was that instead of the 'old fashion' direct cable links to the SATA devices, there was a variety of alternative modular connectors. Had I read the Manual, of course, I would have seen that these plug into the PSU via black sockets on the face of the black CPU box but at this point, they were now hidden in the dark depths between the PSU and the back end of the DVD drive housing. Instead, I looked around for a connector that fitted a 4-pin ... Read more

Answer:Non-responsive HDD

Hello, unfortunately there is a very good chance that the HDD was damaged by the psu incident. The easy way to determine that would be to remove the hdd and then hold it while the pc is turned on. You should be able to hear and feel the platters spinning. After that, just to make sure, you can use a sata to usb adapter and plug it in to a different computer and see if it detects it.

3 more replies
Relevance 36.9%
Question: XP Non Responsive

Ok my brothers PC is having some issues. It will load into XP and all the desktop icons will pop up but you just cant click on anything. I am not sure if it is supported by the forum but I used the latest Hiren's Boot CD 9.9 to boot into mini xp ran spybot search and destroy and kapersky - came back with nothing. Also tried other programs but no others seem to work. Anyone know anything about this and the PC problem? Thanks

Answer:XP Non Responsive

Try booting into Safe Mode. If that works, you can try running MalwareBytes and SpyBot Search & Destroy from there.

If it doesn't, try booting from the XP CD and performing a Repair.

8 more replies
Relevance 36.9%
Question: IE Not Responsive

I hope I am posting in the right place. My Windows 7 pc has been acting up for quite a while. I am not sure if it's an ISP issue or just my pc. When I am running IE or Firefox or Chrome, my websites become non-responsive. Or I will click on a link and nothing happens. It is very "jumpy" meaning pages seem to lock and then switch to new pages after some time has passed. I get the message box pop-up saying that IE is uisng so much RAM and it is usually over 250 MB. I am not sure if it's a hardware issue or internet issue. I did a speedtest and came back over 4 mbps. My issues seem to get worse by the evening. I don't have many issues when using software...just internet websites.

Running a Compaq Windows 7
AMD Dual-Core procesor 2.3 Ghz

Answer:IE Not Responsive

16 more replies
Relevance 36.9%

ive been having a lot of problems with my computer i get way more pop ups than i usually should and things just move so much slower, i cant stand it anymore i did what u guys told me to so im posting my result.txt here it is please help as soon as possible

Log was analyzed using KRC HijackThis Analyzer - Updated on 9/28/05
Get updates at

***Security Programs Detected***

C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton SystemWorks\Norton Utilities\NPROTECT.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Norton SystemWorks\Norton Ghost\GhostStartTrayApp.exe
O2 - BHO: NAV Helper - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton SystemWorks\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton SystemWorks\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [ccApp] "C:\Program Files\Common Files\Symantec Shared\ccApp.exe"
O4 - HKLM\..\Run: [ccRegVfy] "C:\Program Files\Common Files\Symantec Shared\ccRegVfy.exe"
O23 - Service: Symantec Event Manager (ccEvtMgr) - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\c... Read more

Answer:More pop ups, very non responsive

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

You may wish to Subscribe to this thread (Thread Tools) so that you are notified when you receive a reply.

Please be patient with me during this time.

2 more replies
Relevance 36.9%
Question: non responsive pdf

every time I try to open a pdf file on the net, it just go nonresponsive. I have adobe 7.0. Ive tried saving target , it saves but wont open. What can i do to get the pdf files i need to open?

Answer:non responsive pdf

try a program called foxit reader...

might just be acrobat reader thts slow?

it is quite a heavy program.

pm me if u need foxitreader. its a pdf viewing software and not at all heavy.

2 more replies
Relevance 36.9%

I am trying to restore the computer to original factory settings AKA "AS FURNISHED" because of a crashed hard drive. The F11 key does not let me get to system recovery and the computer goes to a black screen with a blinking cursor - Windows 7 Operating System. I have a boot disk which lets me get to recovery however, system restore does not work as there is only one restore point so I am screwed. I do not have an image to restore to either. Any suggestions?

Answer:F11 Key non responsive

try another keyboard

2 more replies
Relevance 36.49%

I have a computer running XP SP2 + all updates to date, for a few months now when you go to press the start button the system can take upto 30-60 seconds to respond, once it does your right for another few minutes then stop's responding for another 30-60 seconds and keeps repeating this cycle. I have checked all running processors and there doesn't seem to be anything there that should be.

My initial thinking is that it's trying to check something which holds the system up regular???? Anyone else have this or seen this problem???

Thanks in advance!!

Answer:Start Bar not responsive

Demise of power supply is on the horizon....
In order to better respond to your question or problem

We require more detailed and specific information

Please repost your request with:

Computer: Brand Name

Age of system:

CPU: Brand, speed

Ram: Type, amount, speed

Peripheral devices

Operating system: Windows 98, 98SE, ME, XP Home, XP Pro, Other

Do you run Anti-Virus software: Brand Name, version #, date of most recent AV signature file

For Video or Graphic problems

Video Card: Brand Name, type, speed, Chipset, driver version and date

Video settings: resolution, advanced settings

For Internet problems:

Modem: Brand name and date of driver

Type connection: dial-up, cable, sat/DSL, other

Browser: IE, Netscape, version #

For Network problems:

LAN card(s): Brand, # of cards

Router: Brand name, type

# machines on network

Network settings and IP configuration

Please state your specific problem and when it started

Did you change anything, install anything before the problem started?

List any recently installed software

List software running in background ie: anti-virus program, mail programs, backup software.

Any power disruption or incomplete shutdowns

Failed Scandisk/chkdsk or defrag attempts

Use of any &#8220;tune-up&#8221; utilities, registry utilities, system diagnostics, other third party utility software

Recent downloaded software

Any new programs or files that have recently appeared in your STARTUP menu or msconfig STARTUP listing
... Read more

2 more replies
Relevance 36.49%

My daughters pc will not respond when it is switched on. There is power going to the speakers via the kettle plug lead for the speekers, but Windows doesn't boost up at switch on. The monitor works as there is power going to it. The processor is a CYRIXIII,64ram,4gig hard drive,SIS530 CHIPSET. Win98,WinOffice2000 & 32ram have just been fitted in the last few months. It also has Norton Antivirus2001 installed. The CDrom does not respond either. PS PLEASE HELP IF YOU CAN THANK YOU..........

Answer:None responsive at switch on

firstly check the lead and fuse in the plug, check the switch on the back of the power supply if there is one, is the power supply starting?(fan spinning)

3 more replies
Relevance 36.49%

When a CD/DVD is inserted the drive fails to run and when clicking on the icon for that drive in the My Computer window or using the Run function from the Start menu, it tells me to insert a disc into the drive. This should be a basic function but won't work and is driving me mad. Any suggestions? Thanks

Answer:Non responsive CD/DVD RW drive

try the followingin device managerexpand theide ata/sata controllers,uninstall secondary ide channel and rebootxp will find the channel on reboot

1 more replies
Relevance 36.49%

I have on system that has become very slow and non-responsive. The hard drive light shows constant activity, but the Task Manager CPU usage is running low. I've updated my AVG and ran a scan with Spybot.

I've been running a RootRepeal scan but it's over an hour and no results yet.

Here is my DDS.txt file:

DDS (Ver_09-10-26.01) - NTFSx86
Run by Mike Wochholz at 13:48:42.39 on Sat 11/21/2009
Internet Explorer: 6.0.2900.5512
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.958.415 [GMT -6:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\AVG\AVG9\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:�... Read more

Answer:Slow and non-responsive

Welcome to the BleepingComputer Forums. Since it has been a few days since you scanned your computer with HijackThis, we will need a new HijackThis log. If you have not already downloaded Random's System Information Tool (RSIT), please download Random's System Information Tool (RSIT) by random/random which includes a HijackThis log and save it to your desktop. If you have RSIT already on your computer, please run it again. Double click on RSIT.exe to run RSIT. Click Continue at the disclaimer screen. Please post the contents of log.txt. Thank you for your patience.Please see Preparation Guide for use before posting about your potential Malware problem. If you have already posted this log at another forum or if you decide to seek help at another forum, please let us know. There is a shortage of helpers and taking the time of two volunteer helpers means that someone else may not be helped. Please post your HijackThis log as a reply to this thread and not as an attachment. I am always leery of opening attachments so I always request that HijackThis logs are to be posted as a reply to the thread. I do not think that you are attaching anything scary but others may do so. While we are working on your HijackThis log, please: Reply to this thread; do not start another! Do not make any changes on your computer during the cleaning process or download/add programs on your computer unless instructed to do so. Do not run any other tool until ... Read more

2 more replies
Relevance 36.49%

Referred from here: ~ OBAfter i removed some malware from my computer some of my programs wont connect to the internet. They did before and some still do but the others dont.DDS logsDDS (Ver_10-03-17.01) - NTFSX64 Run by RaFiKi at 23:06:38.41 on 24/05/2010Internet Explorer: 8.0.7600.16385Microsoft Windows 7 Home Premium 6.1.7600.0.1252.44.1033.18.4095.2573 [GMT 1:00]SP: SUPERAntiSpyware *disabled* (Updated) {222A897C-5018-402e-943F-7E7AC8560DA7}============== Running Processes ===============C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\svchost.exe -k RPCSSC:\Windows\system32\atiesrxx.exeC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\Windows\System32\svchost.exe -k LocalSystemNetworkRestrictedC:\Windows\system32\svchost.exe -k netsvcsC:\Windows\system32\svchost.exe -k LocalServiceC:\Windows\system32\atieclxx.exeC:\Windows\system32\svchost.exe -k NetworkServiceC:\Windows\System32\spoolsv.exeC:\Windows\system32\svchost.exe -k LocalServiceNoNetworkC:\Program Files (x86)\Norton 360\Engine\\ccSvcHst.exeC:\Windows\SysWOW64\PnkBstrA.exeC:\Windows\SysWOW64\PnkBstrB.exeC:\Program Files (x86)\Common Files\VMware\USB\vmware-usbarbitrator.exeC:\Windows\SysWOW64\vmnat.exeC:\Program Files (x86)\VMware\VMware Player\vmware-authd.exeC:\Windows\SysWOW64\vmnetdhcp.exeC:\Windows\system32\svchost.exe -k NetworkServiceNetworkR... Read more

Answer:Non responsive programs

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

14 more replies
Relevance 36.49%

Hey everybody this is my first post on Techguy,

The reason Im posting is because My Laptop, which ive had for about a year now, Is an HP dv1000 model if I remember correctly( im in the library right now) and when I went to turn it on saturday afternoon all it did was turn on and stay on a black screen, it did not respond to me pressing any button at all and even my wireless usb mouse didnt get signal. I left it on untill the batter ran out to see if that worked and when I turned it back on it was still the same. I also tried putting a music CD in but that didnt affect it at all. Sorry if this is in the wrong section but Im not sure where the problem is coming from.

Thanks in advance


Answer:Non responsive computer

16 more replies
Relevance 36.49%


When I switch my laptop on everything is fine and dandy for the first 30 minutes then everything becomes non-responsive and I can't do anything but press the power button. It's fine in safe mode so I have no idea what going on. Can anyone help? Thank in advance!

Answer:Non-Responsive System

16 more replies
Relevance 36.49%

The keyboard on my ideapad U530 is not as responsive as I would like for it to be.  I have to hit the keys quite hard, which of course slows down my speed and affects the accuracy of my input.    Is there a way to change the amount of pressure that I need to use on the keyboard?

Answer:keyboard is not very responsive

Welcome to the Lenovo Community !
There is no setting that I am aware of in Windows or the system BIOS to adjust the keyboard sensitivity on your model.  Is it certain keys or is the whole keyboard like this ?  Was it always like this or is the problem getting worse ?  If the keyboard was always like this even when the laptop was new, it could just be the way this keyboard responds to key presses.

2 more replies
Relevance 36.49%

I have a system that when you log-off of a user to get back into the start screen to log in as another user, the keyboard is non-responsive but the mouse works. You have to restart to get the keyboard working again.
I am logging out of a limited rights account into an administrator account
or visa versa.

XP Pro with all updates
no name clone
AMD Athlon 1.16

Does anyone have any thoughts as to how to fix this bug.



Answer:non responsive keyboard after log-out

Almost sounds like the drivers for the keyboard are not on the other user's account. Be sure that it isn't some software that was set to -only- the administrative account. I've never encountered it doing that myself, as I only use one account, but that's my best guess. Anyone else have a suggestion?

3 more replies
Relevance 36.49%

When I try to send my word perfect doc. to the printer the curser locks up and will not print. I check (Ctrl Alt Delete) for programs running and the WP doc comes up Non Responsive Program (cancel/End Now). I had short lived success when I download the file to a floppy and then print (bottom of the page only) but then it frezes after a while. Report some NT scanner as non responsive..Anybody got a clue???

Answer:Can't print from WP: Non Responsive

Welcome to TSG....

This NT Scanner you have installed what is the make and model?

Check in device manager for interrupt conflicts between these two or other devices?

2 more replies
Relevance 36.49%

Okay, I've Googled this and tried a couple of websites looking for an answer, but so far no luck. At times, for no appartent cause, everything in my taskbar will suddenly become completely non-responsive. I can click away all I want on "Start", on quick launch items, on minimized programs, on icons in the system tray ... nothing, nada, zilch. When I go into the control panel and click on "Taskbar & Start Menu", the same ... no response. It just sits there in sullen indifference (that last bit is peotic licence). The only cure is a reboot.
Can anyone shed some light?

Answer:Taskbar non-responsive

14 more replies
Relevance 36.49%

my bomputer isnt responsive at all. when i click my browser to go on the internet, scroll down pages and type it will freeze for a little while then load. it takes about 15 seconds for it to go. have no idea whats making this do this, help would be appreciated.

Answer:Solved: not very responsive

6 more replies
Relevance 36.49%

On Switching On My Computer I Find That The Keyboard Is Not Working So Can Not Input My Password Tried New Keyboard Still The Same Computer Starts Up Ok Till I Have To Enter Password The Mother Board Is A Asrock And Amd Processer Is There Any Way To Get Into Computer To Take Off Password Any Help Please

Answer:Keyboard non responsive

Did both keyboards have PS2 plugs or were both keyboards USB? Hopefully they both had PS2 connectors and all you need to do is get a USB keyboard and plug it in and reboot.

3 more replies
Relevance 36.49%

Hi! I have been having an issue with my touchscreen... it doesn't respond at all. My laptop is the HP Pavillion Notebook 15 in touchsmart (N5P48UA#ABA). It is running on (freshly updated) Windows 10, and is only 5 months old. The Issue: Several days ago my touch screen stopped responding - at first it was intermittent on-and-off. As of recent it has not been functioning period. Everything else works fine on the laptop, and there are no damages or cracks in the screen. Steps I have taken to resolved the issue (all have failed):I cleaned off the screen with a screen-wipe I restarted my laptopI restored the laptop to factory settingsI received chat support and then remote support from HP (didn't do anything)I spent over an hour on the phone with HP support (wasted time)And of course, I have done plenty of research on the internet.Conclusions that may aid a solution. After spending a ton of time trying to fix this, I know what the problem is not. In Device Manager there are only two drivers listed under Human Interface Devices (HID- compliant wireless radio controls & HP Wireless Button Drive). Its almost like the touch screen driver... doesn't even exist.As a side note, while the touchscreen was working, There were several more drivers listed under the HID section... its almost like they dissapeared.On the HP site, there are drivers that you can download, but the HID drivers that I need are not listedThe touch HID drivers are not ... Read more

More replies
Relevance 36.49%

Hi Tech Guys!!

This probably seems like a trivial problem to you.

when I try to run certain apps from my desktop, the desktop just crashes

I have tried reinstalling Windows twice now and have come across the same thing on each fresh Install!! THE PROBLEM IS FOLLOWING ME

When I start in safe mode the problem does not occur at all

It is not just the desktop though, if I go to my docs and to the desktop folder, they dont load from there either, just crashes "my computer"

Its the same for any app I try to run with a few acceptions, i.e itunes, Firefox, MSN

Cheers for your help guys!!!!

More replies
Relevance 36.49%

Hi All
Anybody familiar with the Zen micro photo? I went to turn mine on and all the music was missing. It will not let me reload any music in it even after I went to the web site and preformed all the cleanup & firmware and reboot sequences, got nothing. Also when I did the clean up it scans till 35% and stops. Pretty sure it should go to 100%. IT turns on, boost up and all the screens come up but there is no music stored in any of them. Any help would be great.

Answer:Un responsive Zen microphoto

it sounds as though there is a fault with the player's memory

3 more replies
Relevance 36.49%

Hi, I cleared a trojan out of my system about 3 weeks back and for some reason I can't use the taskbar whenever I restart. I've downloaded TaskbarPlusRepair tool program and the only way I can actually use the taskbar is by using this program each time I restart, which is beginning to get quite tedious... Each time I use it, the program restarts the Windows Shell thing, does anyone know how to just have this start up along with everything else?

More replies
Relevance 36.49%

i made changes in my c drive since then my application are non responsive and acting weired. Please help me i m not able to use my laptop

Answer:Applications are non responsive

What changes you did in which program?
Provide some details about it..
so as it is useful for others to help you..

8 more replies
Relevance 36.49%

Hello guys.

My first post on here.

I have a real problem with my laptop. It started playing up a few weeks ago, and would freeze after clicking to open a picture.. The egg timer would come up but it wouldnt open the picture.. After tapping the touchpad a few times, the message would appear "not responding" I then would have to clixk the red x and it would then bring up another box saying do you wish to end this not responding program..I click end now and it would then shut down internet explorer.. Doing this and starting again seemed to work, but it started to get more frequent.

Ive now got problems trying to sell things on ebay. The program freezes on the add picture page on every attempt.

Ive used my symntec antivirus and that says things are all ok.. Ive bought this registry cure thingy and that hasnt helped either.. Its now doing my head in.. Any ideas?

Ive tried scandisk, defrag.. but still to no avail, and the computer is defo slower than it used to be..

Im not the most intelligent pc lad.. so be gentle...



Answer:non responsive program

try downloading Mozilla Firefox and see if you still have the same problems.

(Mozilla Firefox is an better alternative to Internet Explorer)

3 more replies
Relevance 36.49%

For the past week or so, I have had problems with a computer, and browsers and webpages becoming slow or giving error messages. Trying Microsoft Fix-It the whole system froze. Tried to do an XP repair with nil results, so did a full format. All seemed well until I tried to do updates,Avast Ok, connection to internet Ok, then on reboot, goes as far as the XP motif and then shutdown, with repeating events.
Trying now to boot with the original XP disk, so as to try a repair or reformat, and the computer will not boot from disk. Previously the computer use to ask 'Boot from disk-None' and went into start mode. Now no message.
I hope that I have explained okay. Any help would be appreciated, so as to get the computer working again..

Answer:Un responsive Computer!!

Have you tried repair in Safe Mode?

10 more replies
Relevance 36.49%

I just done a fresh reinstall.  Reinstalled my drivers an SP 3.  When I go to the windows update page it dont come up

Answer:Updateing Non Responsive

I would check your Internet connection...did you remember to re-install ALL your drivers ?

4 more replies
Relevance 36.49%

When I click on the hub icon (favorites, reading list, etc.), I get no response. It's stuck on reading list. Clicking on favorites does nothing.


Answer:Edge Hub is not responsive

Does Edge totally freeze up then too(happened to me when viewing Downloads). The only thing that eventually helped was clearing everything(nuking the cache). I suppose it was a corruption.

0 more replies
Relevance 36.49%

Hey guys, what's up? So whether it's Windows 7 or Windows 10, my PC will just lock up for about 5-7 minutes, then be perfectly normal again. The apps hang, but I can move my mouse. I've formatted and reinstalled a couple times, but sooner or later it starts happening again. Also, this happens whether Windows is installed on SSD or SATA......sounds like hardware or drivers.Event viewer is showing a Service Control Manager:The Microsoft Passport Container service terminated with the following error: General access denied error-------------andstorahciReset to device, \Device\RaidPort1, was issued.I've been dealing with this for about a year now.I've attached my DxDiagAny advice would be appreciated.

More replies
Relevance 36.49%

Recently had problems with computer flashing multiple windows of emails or advertisements.  Thought the was computer infected so I just reformated the HD and reloaded XP Pro and SP2.  After what appeared to be a successful load, I went to load the two programs, which also appeared to load successfully.  When I went to load the new printer drivers, the computer became non responsive.   It appeared to lock up.  When I went to see if one of the new programs would boot up, I double clicked on the desk top, and mouse pointer/hour-glass would constantly flash at different points on the screen.  So I went to the Start menu and went to 'all programs'.  When I attempted to leave the 'all programs' to select the program I wanted, it would send me back to the dest top, and I couldn't get either of the programs to start.   I tried a different video card but the problem is the same.  I can't get any of the programs to respond.    Appreciate any advice.

Answer:Computer non-responsive

Is it a real XP CD that says Microsoft all over it?A good format and reinstall should solve all problems for a while IF the hardware is functioning correctly. Did you format the drive during the installation?

1 more replies
Relevance 36.49%

Got a solicited Outlook email which I opened.
That brought up several major areas or topics with the option to select one by cuing on a "button" for that one.
However, that accomplishes nothing, regardless of whether I click with the left or right mouse button. There are no url's, (?) to copy or select, nor could I find anything else to select or cue to open the sub category.
Not sure what is going on! Why set things up so one can select a topic if selecting does nothing.
Almost sounds like I designed it, and I am an illiterate computer illiterate


Answer:Selection Non Responsive

Tried another email. Not sure if another mailing is from same outfit (see previous), but same situation

5 more replies
Relevance 36.49%

New Sony Laptop, Vista now suddenly won't allow any input into the adress bar nor into the google search space on the latest firefox...Using the bookmarks I can access web sites but once there  if they have a search bar; again the curser is there but not able to input anything.I have zonealarm free, and defender running but everything was fine before with the same software.Whats more sometimes The adress bar works and then it does'ntAny thoughts on what may be happenning here?Thank you

Answer:Non-responsive adress bar

Have you tried reinstalling firefox?By 'latest version' do you mean Firefox 3?

4 more replies
Relevance 36.49%

my power strip that i have my computer, printer, etc hooked up to is located under my desk, where your feet are. the other day i accidentally hit the plug for the power supply to the computer and the comp turned off, so i restarted it.

my printer doesn't work any more after the comp came back on, everything else was fine (the printer is a HP officejet 4110). and by doesn't work, i mean that there is nothing showing on the printer's screen, and the little green light that is normally green now flashes green for a few seconds and then starts flashing orange/red very very quickly. when you turn off the printer, the computer says "found new hardware". so i put the installation disc in my cd drive and tried to reinstall the software, and it says the software couldn't be installed because it can't find the right software. i then make sure it's searching my D drive (cd drive) where i put the printer's software installation cd into, and it still says it can't find it.

what should i do? i am running win xp service pack 2 BTW

Answer:Non-responsive printer...

i looked closer to what disc the computer is looking for to install and it says REFLASH. i dont have a disc for that, does anyone here have it or know where to get it?

1 more replies
Relevance 36.49%

My computer is running very slowly, sometimes non responsive/freezes
Thank you for any help you can provide

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 22:07, on 2008-10-09
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton Personal Firewall\NISUM.EXE
C:\Program Files\Norton Personal Firewall\ccPxySvc.exe
C:\Program Files\Common Files\Symantec Shared\Security Center\SymWSC.exe
C:\Program Files\Yahoo!\Messenger\ymsgr_tray.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL =
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://us... Read more

More replies
Relevance 36.49%


As in the heading of my PC keeps freezing and is Non-responsive. I have just formatted the HDD and reinstalled WinXP.

It takes forever to open some pages and I have 1gb of ram. My HDD is 120gb and the motherboard is 3.0ghz.

I have a LG DVD burner which is another problem.......and a Nvidia video card

Major software installed is

Win XP home edition with SP2
Bullguard Anti virus
Opera internet browser
PC on point registery fixer
Assorted Popcap games
Microsoft Office for XP
123 copy dvd

I only know the basics about PC's but I thought that my PC should be a lot faster than it is. I have downloaded all updated drivers for everything.

I am hoping that someone can point me in the right direction to fix whatever problem my PC has.

When it becomes unresponsive and I manage to get the task manager CPU usage is only about 5%


Answer:Freezing and Non-Responsive PC

It might be that registry fixer you got there. I remember at one point i had one and after i ran it, my computer would let me logon, but after a few mins it would restart, and i couldnt get it to stop, until i reformated. So you might try re-format again and dont install or run that registry fixer. If that don't fix it try hitting it with a hammer :knock: !!

Best of Luck.

1 more replies
Relevance 36.49%

I think I pretty much know the answer to this question however I'm in a slight dilemma.

I have an HP laptop here with the trackpad not responding at all. I dug all of the viruses out of it and reinstalled the drivers several times, as well as a system restore from 10 days ago. But the trackpad still didn't work. I considered re-imaging it since it has a recovery partition with a factory-loaded default image, but instead I decided to pop in a Linux LiveCD.

Upon booting Ubuntu, the trackpad still didn't work.

I checked all Fn keys. Nothing helped activate it. There's also a dedicated on/off button by the trackpad. It of course is enabled.

I think it's pretty safe to say it's hardware related, but my tools are at work and this is bugging the **** out of me. Is there anything else you guys think I should try before I crack this thing open tomorrow?

Answer:Trackpad Not Responsive.

There is a cable that connects that trackpad to the MB, while you do have to take a lot of the laptop apart to get to this cable it isan't as hard to get to as the processor. I agree, it does sound hardware related (assuming you've hooked up an external mouse and it worked) and if the plug is fine, you may need to replace the track pad.

My Pavilion laptop has a button right above the trackpad that turns it off - stupid i know but just make sure that light is on if your laptop has that button.

1 more replies
Relevance 36.49%

slow browsing and non responsive my browswer takes a few minutes too start up from cold booting and sometimes its non responsive for a few minutes then starts working again can someone have a look at my hijack log thanks ive scanned for viruses none present used mal aware bytes and spybot search and destroy and its all clear

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:35:00 PM, on 28/08/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18813)
Boot mode: Normal

Running processes:
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Creative\Sound Blaster X-Fi\Volume Panel\VolPanlu.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Common Files\logishrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\Program Files\Hercules\Audio\DJ Console Series\HDJSeriesCPL.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\Creative\MediaSource5\Go\CTCMSGoU.exe
C:\Program Files\Systweak\Advanced Vista Optimizer 2008\AVO.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Program... Read more

More replies
Relevance 36.49%

My computer keep getting into a non-responsive stage. By this I mean when I have a window open and try to go to another or close the current one I get no response. I can hit Alt-Ctl-Del and it says the program is running. I try and Minimize and that will not work either. After a couple of minutes everything seems to clear up

I'm running a Dell Dimension Pentium 2 GB Ram Windows XP SP3

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:08:59 PM, on 2/12/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\Program Files\Dell Photo AIO Printer 924\dlccmon.exe
C:\Program Files\Common Files\InstallShield\UpdateService\ISUSPM.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\AVG\AVG9\avgwdsvc.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Fi... Read more

More replies
Relevance 36.49%

After warm boot PC goes into a lock-up for 3 minutes, it does the same thing periodically during run time.
OS is XP
Disc 500GB (98% free)
Email Client Mozilla Thunderbird 3.1.1
Browser IE8
Have tried:
Webroot Virus Detection
Malwarebytes Anti-Malware - Malware removal
Registry Mechamnic


More replies
Relevance 36.49%

First program to stop responding was dvd cyberlink now it's spread to mmc.exe any fixes for this. The programs according to the eent viewer seem to stop interacting with windows.

Answer:Non responsive programs

You need to supply more info: brand and exact model of computer and Version of Windows you are running.

8 more replies
Relevance 36.49%

Now don't get me wrong here. I like Emsisoft and how it operates. But lately I've been playing my usual games from Steam and from some of my online games like Mortal Online and Elsword, when Emsisoft suddenly steps in saying they're giving off suspicious behaviour.
This has gotten my interest piqued as to why Emsisoft would react to my games like this, especially my Steam games. I recently got Planetside 2 and during play Emsisoft came up with 2-3 reactions.
Is this to be expected of Emsisoft? or would this be a cause for concern?

Answer:Emsisoft being a tad too responsive?

Hi IllusionEclipse,If these games are official Steam games then I'd tend to say that these are false-positives. Any change you can upload the flagged file(s) to and post a link to the scan results here? I can then have a closer look at this.

10 more replies
Relevance 36.49%

I recently was given some extra RAM by a friend. I wasn't sure if it was the correct size for my PC, so I removed the RAM to check. It indeed was the wrong size, so I replaced the RAM and tossed the extra RAM given to me. I'm sure that the RAM stick was placed back into the computer the right way and is fastened down tightly. When I reconnected everything, the computer turned on fine. But it didn't seem to be recognizing the monitor. Nothing was coming up on the screen and instead of the power light being green, it was orange. So, I checked all my connections and tried again. It still wouldn't do anything. So, I checked all the internal connections as well. I hooked a different monitor up and got the same result.At the moment, my situation is the same. Both power lights on the tower and the monitor are orange instead of green. The computer won't respond to any key commands, nor will it even try to initiate opening Windows XP.Anyone have any ideas on what is wrong? Could I have damaged the RAM when removing it? Any help or ideas would be amazing. I have no idea where to start or what to do. I've got a lot of work saved on my computer that I really can't stand to lose. -Thanks  

Answer:HELP: Computer is non-responsive...

Have you checked other connections and did you take anti-static precautions when changing ram sticks?Your data on the hdd is probably safe, slave it on another pc using the same file system.When posting please give details of your pc especially the OS and file system in use.Good luck

4 more replies
Relevance 36.49%

Hey guys, what's up? So whether it's Windows 7 or Windows 10, my PC will just lock up for about 5-7 minutes, then be perfectly normal again. The apps hang, but I can move my mouse. I've formatted and reinstalled a couple times, but sooner or later it starts happening again. Also, this happens whether Windows is installed on SSD or SATA......sounds like hardware or drivers.Event viewer is showing a Service Control Manager:The Microsoft Passport Container service terminated with the following error: General access denied error-------------andstorahciReset to device, \Device\RaidPort1, was issued.I've been dealing with this for about a year now.I've attached my DxDiagAny advice would be appreciated.

Answer:OS not responsive for minutes

QuoteHey guys, what's up? So whether it's Windows 7 or Windows 10, my PC will just lock up for about 5-7 minutes,That detail could imply a hardware problem.Do you have a spare PSU?What kind of test tools do  you have?Do you have another PC that is very reliable?Do you have a method for backup of your important personal files?If not, make backup plan. Diagnostics can be intrusive and ruin data. So take care to put you important personal stuff somewhere else.Here are the general rules for DIY testing.? Reduce the power load on the system. Go to just one or two sticks of RAM .? Remove the graphics card and only use the build-in graphics.? Unplug your DVD drive.? Use a OS that does not require a hard drive. See how long it runs .? Use f Memtest86 from a USB.  Do long test.? Use some tool to get temperatures from on board sensors .? Try  a hard drive test from USB. Run the intensive tests. Some good software tools for hardware testing: report back. 

3 more replies
Relevance 36.49%

Okay, I've Googled this and tried a couple of websites looking for an answer, but so far no luck. At times, for no appartent cause, everything in my taskbar will suddenly become completely non-responsive. I can click away all I want on "Start", on quick launch items, on minimized programs, on icons in the system tray ... nothing, nada, zilch. When I go into the control panel and click on "Taskbar & Start Menu", the same ... no response. It just sits there in sullen indifference (that last bit is peotic licence). The only cure is a reboot.
Can anyone shed some light?

More replies
Relevance 36.49%

I have a computer with a 1000 MHz Pentium 3 processor, with 384 Mbs of RAM and a 3DFX Voodoo3 3000 video card. I run certain programs and at some point windows gives me an error message telling me that it is "non-responsive". Any suggestions?

Answer:Non-responsive programs


Lets see what you have running, as you may have some background things running causing this problem.

Lets take a look at a log. go to , and download 'Hijack This!'.
Unzip, doubleclick HijackThis.exe, and hit "Scan".

When the scan is finished, the "Scan" button will change into a "Save Log" button.
Press that, save the log somewhere, and please copy & paste its contents to the forum.

It will possibly show other issues deserving our attention, but most of what it lists will be harmless or even required, so do NOT fix anything yet.
Someone here will be happy to help you analyze the results.



1 more replies
Relevance 36.49%


Got a Win XP SP3 Compaq desktop here, none of the USB ports are working. 4 are flagged with the yellow marker in Device manager. If I uninstall them then let Windows redetect it asks for the file 'seehcri.sys' which I cannot find anywhere.

Any suggestions on how I can fix this?



Answer:usb ports non-responsive

You need to install the drivers for them.
To do this go on Compaq (hp's) website and go to the driver download section and enter the model of computer in and there should be a section on usb ports and there will the drivers that you need.

3 more replies
Relevance 36.49%

When I click on the hub icon (favorites, reading list, etc.), I get no response. It's stuck on reading list. Clicking on favorites does nothing.


Answer:Edge Hub is not responsive

Does Edge totally freeze up then too(happened to me when viewing Downloads). The only thing that eventually helped was clearing everything(nuking the cache). I suppose it was a corruption.

4 more replies
Relevance 36.49%

I'm a tech at a huge dealership. Some, not all, of our pcs have an issue with IE running really slow and some times not responsive at all. The thing is, all other programs wether it be firefox or some kind of messanger are not affected at all. I originally thought maybe it was some kind of connection issue, but after having both AT&T and the communications company that originally setup our connection come out and verify there is nothing wrong, I'm stuck searching for answers. I know it's not the "temp" or "offline" files as we delete and refresh the pc's all the time.

I'm really at a dead end here and I'm praying some of you guys and girls can help a brother out!

If you have any ideas and need to contact me asap, please feel free to pm me for my cell phone.

Thanks in advance,


Answer:IE V6-8 slow to not responsive?

I recently installed IE8, because my pages were loading very slow and constantly got not responsive. I would click on the mouse several times on page and it would then load quicker, sometimes. This happens with OutLook Express, too. It is still happening.

1 more replies
Relevance 36.49%

I downloaded real arcade to my computer and now when I try bring it up on the computer I'm told to go to article asp?id=Q261328.

Answer:non-responsive downloads

Welcome, where did you download it at?

1 more replies
Relevance 36.49%

OK where do I start

Yesterday (sept [email protected] around 8pm) evening I was prompted to update Mozilla, to the newer 3.5.3. I did just that, after the update it required a restart, did that, I clicked on Mozilla icon to continue my browsing, Mozilla would not load. So now I go and click on the Norton icon to run a scan and see if everything is ok. Norton will not respond either, just the hour glass shows up and then disappears. I go and click on IE and see if that will run for me, it does, and it is slow real slow, I have not used IE for at least 2 years, I figured it was the version I am running.

I decide to restore the laptop back 2 days to get my old browsers versions back, no dice, that was all for last night.

Today I restore the laptop back to AUG 18 and it told me nothing had changed, I was left scratching my head, I installed at least 15 updates the past 3 days, so something should have changed. I tried Norton again, no dice it wont even allow me to get support. I decided after chatting with a fellow fisherman to un install mozilla, and download and run Malwarebytes Anti- Malware. It pulls 268 infected files out, 3 of which are trojan files I restart the laptop and rerun this again and get 42 more files.

I try Norton again, nothing, I re install Mozilla nothing, I try Opera, nothing. Next I download and install Super Anti Spyware save it on my desktop, and restart the laptop in safe mode and run a full scan with SAS it gets 49 more files one of which is a Read more

Answer:Non responsive browser and.......

Howdy minivin5. Glad to see you made it to the site.

32 more replies
Relevance 36.49%

My computer is Non-Responive more then it is working.  If my memory is correct, I went into the Bios et. al. and set all to maximum performance years ago, as I am a firm believer of keeping the computer COOL!.  I am **bleep** retentive in using cans of compressed CO2 to blow out the computer.  In reading I find that if the Cooling fan is part of the problem that I should get a warning that the fan has failed to perform to spec's.  But my interpretations of this gives me the impression that this is tied to the Intel processor, and not looking at the AMD Radeon GPU 6770M.  As a side note I have also been uninstalling programs at the same time. At first I thought I had a failing CPU, and or a clogged Heat Sink.  In looking into the replacement of a CPU Fan, which I mentioned earlier I should have gotten a warning from the Bios that the fan was failing, I found it was the same cost to buy a new fan as it was to buy a Heat Sink with a new fan.  Once I realized what the Heat Sink looked like, I got to thinking the GPU may be the actual problem of the computer becoming unresponsive, which is why I started wondering if I should replace both the Heat Sink and the AMD GPU. Does anyone have any suggestions, advice other then to throw the computer away.  I would rather to spend some monies and at the same time upgrade the computer to higher spec's CPU and GPU and get another year or two out of the computer as this computer ... Read more

More replies
Relevance 36.49%

Last night I was showing a young child my FSX, and all the things that you could do with it. Somehow he started playing with the keyboard and the next time I opened up FSX the joystick movements were not responding in the aircraft. I checked it out by using FS 2004, and no problem, it worked fine, so the connection wasn't the problem. I think it must have been due to the kid playing on the keyboard which made the jostick unresponsive when using FSX. Can you help please.


Answer:FSX - non responsive joystick

this happens to me alot using my flight stick and xbox360 controller. when you start up fsx keep your flight stick unplug till you get passed the loading screen. pause your fsx plug in the flight stick and wait for a minute for the computer to load it in now go to your controller and see if it is active you might have to select it rather then the mouse for controlles. also add if you have fsuipc. cause it could be the problem as well always good idea to add it when asking for assistance. because it has speacail key and joystick assignments as well

3 more replies
Relevance 36.49%

I have a problem that I've not had before.  My desktop monitor shows the screen that it would show if I had pressed the monitor button that controls the brightness, width, height, etc. of the screen.  The desktop computer will not respond to ANYTHING, including keyboard, mouse, ctrl-alt-delete, etc.  I turned the computer off and re-started it, and still no change.  I turned off the power strip, waited a few minutes, turned everything back on, and still no change.  The only thing working is my internet connection, and I know this because I can use the laptops in the house with the wireless card.  At this point, I can't use the desktop computer or the printer.  Any ideas?

Answer:Non-responsive computer

do you have any start up disks for your pc??? try those. If not try to find some for your floppy. if you dont have a floppy. well then I am at a loss.

8 more replies
Relevance 36.49%

Sometimes my XP machine (P4 2.6ghz, 512ram) gets in these weird cycles where some of the buttons on applications wont respond to me clicking on them, and sometimes, it switches the left click for right clicking. This seems to happen more often when I leave the computer on for a while.

Any ideas for fixes ?
I guess I should also mention that this seems to happen regardless of what type of mouse/keyboard im using, and whether its ps2 or usb connection.

More replies
Relevance 36.49%

How do I fix "non-responsive script"? The computer freezes when this happens and stays that way until the message comes up about the script. It's usually the same two or three things...script: chrome: //google-toolbar-lib/content/toolbar.js:82; ...or script: http:'//;...or script: chrome:///javaconsole1.6.0_20/content/ffjcext:20.It's annoying to be working on something and have the computer freeze up.Thanks for any help!

Answer:non-responsive script

Sounds like a virus.

2 more replies
Relevance 36.49%

This may be a double post, but I can't find my original posting.  My x230 is approximately 30 days past warranty (Windows 7 Pro).  Overnight it has become non-responsive. I have tried with and without battery, two different power supplies. I have tried, multiple times, holding the power button down to "discharge"?  No lights showing, no response to any buttons being pushed.  Within the last week I accepted Lenovo's prompting to update various files, including BIOS.  My recollection it has been re-booted at least once since the Lenovo system updates.  For what it is worth, I have always had the touchpad "turned off" via the software.  Any help, thoughts, or insight would be appreciated.

Answer:X230 non responsive

Make sure that you hold the power button down for a minute without the battery in! Otherwise its a motherboard issue and you might need to buy a new one

1 more replies
Relevance 36.49%

Hi i've encountered an issue which I can't solve by myself.

My PC has been incredibly stable up until today - booting suddenly takes forever, explorer takes ages while loading icons on my desktop, trying to use right mouse button or open folders results in complete hang of the system. If i wait long enough until all desktop icons are loaded, i can even open browser and some folders but eventually explorer or PC hangs anyway, not to mention that everything is working sluggish.

I can open the task manager and check resource usage, also AIDA actually load successfully and according to them - there is no increase in CPU or RAM loads.

I've tried running Eset online scanner and I've checked my system disk with Avast! - they didn't find anything. I've used hijackthis but found no suspicious entries. I've also used combofix but it found only some harmless .dlls none of which were unknown to me.

I am able to load Vista in safemode without non essential programs but the issue exists even there, despite slightly faster booting and icon loading times.

Unfortunately I cannot use system restore and even though I do have complete pc archive - so far I wasn't able to use it, since it's not available in safemode and during normal boot my PC usually hangs before I am able to get to control panel.

At this point I've exhausted all known options and solutions and would welcome any help or suggestions whatsoever. Could it be sudden hardware issue? If so - what could be respons... Read more

Answer:PC barely responsive.

What is the make and model of your pc? Did it come with a Recovery CD? Did you make a repair cd with Vista?

4 more replies
Relevance 36.49%
Question: Responsive slow

I have a custom built desktop. It is Windows XP Professional SP3, Intel Pentium 4 3.20GHZ, 2GB DDR-400. My computer is pretty slow, it takes time to do stuff such as trying to choose a file to burn etc. I usually have to give it 1 minute or more so it can load. I have tried to do a full scan using DrWeb but after a minute of scanning it just randomly freezes, which i have to restart it. So i can't find out if there are other viruses on it. I've tried using sfc /scannow but it keeps saying to insert the XP disc which i did. Other people had told to copy the I386 folder to C: drive and change the registry to run from there but that didn't work. Can someone please help me, this may have a lot issues?

Answer:Responsive slow

Hi .Please read:Slow Computer - Slow Computer-browser Check Here First; It May Not Be Malware -;-it-may-not-be-malware/ As for scanning for malware...there are any number of online scans which can be performed.Trend Micro HouseCall - Free Online Virus and Spyware Scan - Trend Micro USA - Windows Live OneCare safety scanner Free online tool for PC health and safety - How To Use Sfc.exe To Repair System Files - Louis

4 more replies
Relevance 36.49%

machine sometimes will not open programs or when you do they will not respond. sometimes I have to do a manual boot because I cannot click on start to shut down machine. I run winpatrol, zonealarm, avast home, celeron 2.0 win xp pro stripped to the bone and 512 ram. TIA for any help. juntuo

Answer:win xp pro hang non responsive

When you can get to it, press ctrl+alt+del an look at your running processes. How many? Is there one or two that seem to be using a higher % of the CPU aside from system idle?

10 more replies
Relevance 36.49%

OK, I booted up my computer and then left it for several hours, working on it from my laptop with remote desktop. When I came back to it(never left the house) it was off. I said to myself, thats weird and tried to boot it up and nothing happens except when I flip the switch back and forth on the ps, I get a brief light to flicker next the power button. The lights are all on on the mobo, it just won't boot. I can't get any fans to turn on, no sounds at all.

What do you think my problem is???


Answer:Computer non responsive

Sounds like the power supply might be shot. Incidently flicking it on an off can cause surges which may cause more damage.


4 more replies
Relevance 36.49%

(History) three weeks ago my old mobo became non responsive i did all test to test mobo (removed RAM no beeps, touch cpu not hot to the touch).
So I decided to replace everything except hard drive. I purchased: MSI 785gm-E51 MOBO, AMD athlon ll X3 440 Triple Core cpu, geforce 9500gt gpu, coolmax 140mm 600watt psu, hyper n520 cpu cooler, OCZ ddr3 RAM. I put it all together worked great for 10min +/- had all drivers installed for hardware was running benchmark test on Gpu. Then screen went black no signal from mobo. No error beeps from mobo when RAM is removed, psu fan runs, cpu fan runs and gpu fan runs. Same problem i had with first mobo. And my question is could there be something on my hard drive causing my mobo failures?

More replies
Relevance 36.49%

running ie 7 previously ie 6 opera and firefox browsers scanned for viruses all clean scanned for spyware all clean i can be browsing on any site and it will stop responding so i have to alt control del and reopen browsers again spec off machine intel duo core 1 gig ram laptop used bug dr all problems fixed was told it could be browser helper objects freezing the ie ? and if so how do i delete them running nortons security and anti virus and symantec firewall any help appreciated thanks

Answer:non responsive browsers

I had trouble reading what the problem is since there is no punctuation or capitalization. You should post a HijackThis log in the appropriate forum, and please use punctuation.

1 more replies
Relevance 36.49%

I bought a MS Wireless Optical Mouse some time ago. The installation was not a problem, however I have a very strange problem in that for no apparent reason sometimes the mouse will have no or very delayed responsiveness to clicks and scrolls.

This is very annoying and when I use the spirit of the irritation built up to press the button harder this will most often on 3rd or 4th occasion get the mouse in action. After a while it the non responsiveness stops (10 minutes to one hour) and the mouse will work fine again. It is not normally a problem on start up.

I have changed batteries, reset the mouse "receiver", installed more RAM (now have 512 MB) and nothing has helped.

Can anyone out there please help me as this is very frustrating.

Finally, if I use the keyboard (when possible) there is no delay, only when using the mouse (so if I cannot scroll with the mouse there is no problem using the arrows up and done for example)...

Thanks in advance to anyone who can help! Will be much appreciated.


Answer:On and off non responsive mouse

FWIW, I just had a similar issue with my Logitech cordless optical mouse. I finally took it apart and it has several really huge dust bunnies blocking the scrolling wheel. Cleaned it out, and all is well.

3 more replies
Relevance 36.49%

If you need more information then you don't have the answer.

Answer:How do I fix non-responsive script?

I assume you mean some web page shows this issue?Why did it take me over a year to phone in a problem to ATT?

7 more replies
Relevance 36.49%

Hi, my hp pavilion hpe desktop has suddenly stopped showing me any display except the cursor. It shows the hop logo at startup but other then that nothing else. I can't even access command prompt. Any suggestions to help me fix this issue. Thanks in advance !

Answer:Display is responsive

Subject is spelt incorrectly display is unresponsive **

1 more replies
Relevance 36.49%

My pc has lately as expected gone very slow and not as responsive.
At the start-up especially. I have to wait a good 2mins before touching anything or things start to 'Not respond' and such.

I was wondering if you guys could recommend me ANYTHING that I could do to speed up my pc significantly.
Exclude, formatting my pc / buying new parts.

Thanks for your time.

Answer:Slow/Not responsive

First verify you're defragging your drive regularly. Vista is normally set to do this automatically so I doubt fragmentation has anything to do with it, but you should check to make sure.

Second, run antivirus. Sometimes a virus can slow a PC down. Again, I doubt this has anything to do with a slow PC, but it might.

Third, check your startup programs. If your PC is running slow at startup in particular, one real possibility is that you have a bloated number of programs and services starting up. Go through the list in msconfig and see if there's anything you can disable. Also use the Services console for the same thing.

Post PC specs. You might be low on resources.

18 more replies
Relevance 36.49%

This normally takes a couple of days for it to start occurring but after that when I lock the system when I log back in explorer.exe is non responsive. Once it becomes unresponsive once though every time I lock the system and come back it is unresponsive again.

None of the apps running at the same time seem to be in common. I think the only app I have not eliminated yet was Chrome.

I ran memtest overnight and it didnt have any errors. I also ran MBR Check Super Anti Spyware and TDSSKiller and they came up clean.

I disabled all non ms apps using shellexec and action center is clear. I also verified and made sure all drivers are current.

The event viewer doesn't show anything of value. Just that it become unresponsive.

I am pretty much stumped at this point. This is a brand new system too.

Any advice would be great.

Answer:explorer.exe becomes non responsive

I'll tell you how I solved the exact same problem when it happened to me. I think IE is crapping out on everybody. But when I haad the problem, I got Mozilla Firefox. Copy and paste this URL into your browser when it is working so that you can download Firefox. It is a more stable and dependable browser to use. And it's free also. I hope this helps you as it did me.

8 more replies
Relevance 36.49%

my computer screen remains blank when i boot up my computer

im running ubuntu

*i think the slot for the monitor is broken
*its not the monitor

Answer:Monitor not responsive

16 more replies
Relevance 36.49%

Hi I have recently realised that my pc is no longer being as responsive and it once was its very unstable my memory has crashed leading to my game closing (world of warcraft) .
I would like to upgrade my processor or gaming card but im really not sure where to start to fix the issue any help would be much appreciated.

Answer:Looking to upgrade, PC isn't as responsive as it used to be

Which PC do you have, what is the model number?
Is WOW the only game you play? If not which others do you play?

13 more replies
Relevance 36.49%

Alright so after a bad download, my laptop got infected and I did the removal using Avast and Malwarebytes anti-malware. It's good now but here's the thing. You see my laptop is a good laptop for gaming and such, so I can handle games especially the ones I have been playing, but the thing is whenever I launch a game such as league of legends or Planetside 2 or anything, the whole client (game) goes "not responding" and then "responding" in less than a second and it keeps alternating for 5-10 seconds and I cant type or do anything, its like tabbing in and out really quickly and Idk waht to do because this never happened before. Im happy to provide any info that is required. My operating system is also Windows 10. The name of the laptop is Lenovo y-40

More replies
Relevance 36.49%

i was repeatedly getting kicked out(nonresponsive programme error) of Microsoft IE so i switched to Mozilla FF, however i can't access some sites from Mozilla(security reasons(?)) so need to go back to M/soft. Is there a way i can access these sites from Mozilla or can you help me fix my M/soft IE?

Answer:non responsive programme

Like which sites cant you get into that you would in microsoft? There should be no difference if u import ur settings from internet explorer to mozilla. I would check ur Internet Options.............. start...settings...control panel...internet there is security and all the stuff u need to adjust.

2 more replies
Relevance 36.49%
Relevance 36.49%

I am so frustrated with my computer it is a gateway and I used vista & Google chrome - everyday I put up with NON-Responsive messages I've tried contacting google, NO RESPONSE.....I've tried going through my Hughesnet people they just send me a generated message on how to restart the system......I'm not sure why its doing this or why it's going to dang slow....Any suggestions on what to try next???

Answer:NON responsive messages

6 more replies