Computer Support Forum

Hard Drive Difficult to Wake Up

Question: Hard Drive Difficult to Wake Up

I have a Western Digital 7gig hard drive installed as the second drive. Frequently it will not be found when the computer boots. About the other half of the time, all works normally.

The problem first becomes apparent when the BIOS looks for the drives. It will hesitate for a LONG time, then find the first drive, and not find the second drive. If this happens, the drive activity light will stay steadily lit for as long as the computer is turned on - no blinking, always on.

Can anyone advise me, or give me a good guess, whether the problem is likely the drive, power to the drive, or the IDE controller?

Thanks!

Relevance 100%
Preferred Solution: Hard Drive Difficult to Wake Up

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Hard Drive Difficult to Wake Up

6 more replies
Relevance 66.42%

I think if I replace my Hard Drive, I will have less problems. (My HD is full)Anyway, I found some diagrams on google searches which show how to change a HD. It does not look difficult even though I have no clue whatsoever about the inside of a tower.  Does anyone know of a super simple diagram? I called Sony and was told to get a 200GB or better but NOT a SATA. One more thing...Once I change it, do I just load the XP Recovery discs? Will everything just load itself???

Answer:How difficult is it to replace my hard drive???

This is one of the better online guides.---->GoHere

3 more replies
Relevance 66.42%

I am a knowledgable user of both Mac and PC, but I'm screwed for the first time in my life on this one. I was formatting the 2 GB IBM hard drive that came with a four-year-old Mac (PowerComputing Mac clone, 225 mhz PPC 604 chip). After about two minutes, the power went out. Now the formatting utility recognizes the disk and can tell it's a 2 gig IBM, but I can't format it. The utility comes up with a message that the disk is not ready. I've tried everything I know how to do. Please help! Even if you know nothing about Macs, I would love some generic advice on how to remedy a partially formatted hard drive. Thanks.
 

Answer:difficult hard drive problem

If you can put it in an IBM machine, you could use ZAP or WIPE from IBM - that will kill all the data on it, which should then allow it to work just fine.

http://www.storage.ibm.com/techsup/hddtech/welcome.htm
 

1 more replies
Relevance 66.42%

hey ok heres my problem,


i was out i came home and my pc had restarted and came up and froze on a boot disk error screen, so i pressed enter and ****ed with it a bit and it then it booted up to the windows screen.
next im at windows and trying to backup both hard drives everything i touch makes a alert come up that says "program filepath corrupt please run chkdsk" so i run chkdsk and it "fixes" the problems but the alerts are still there so i run it again it fixes the same problems this is a forever cycle so i stop,run virus scan halfway through scan my pc freezes and goes to a blue screen and says a bunch of technical crap (i don't rember what the actual message was) and that it was begining the physical memory dump. so i quickly restarted before i could cause further damage.
then it restarted it took like 10 min to get from startup to windows again still with the boot disk failer.
so i then get into windows and once again more problems i dont get the alert anymore because now my second hard drive ( the one everything was backed up to) doesn't exsist anymore it can't read it,but in device manager it says i have 2 working harddrives so i reinstall drivers through device manager. nothing happens still can't see drives.
so then i run virius scan it deleates 7 virus's and lockes one up.
i still can't acess my second drive i still can't resolve the boot disk failer. what's worse i use my computer for an ebay bu... Read more

Answer:Very difficult hard drive problem!!!!!

Some system specs could be helpful.
 

4 more replies
Relevance 66.42%

This is for the purpose of returning a laptop.
When I reset Windows 10, it says deleting my files will just make it "harder" for people to access them.
I understand the files may still be accessible using data recovery software. I'm guessing the reason for this has something to do with the reset process leaving the binary data of the hard drive state mostly intact while only deleting the pointers to that data. If that's the case, shouldn't there be an easy way to just wipe over everything and reset it to zero?
I've looked into DBAN. I don't understand what this means, but I hear DBAN works with an earlier version of the hardware BIOS and what I have is UEFI which DBAN doesn't work with.
Also, DBAN nukes some things it shouldn't, like the operating system itself, so that needs to be backed up. Shouldn't there be a way to wipe only the data that has resulted from someone actually using the computer?

Answer:How do I wipe the hard drive, and why is it so difficult?

It is hard because every bit has to be overwritten, maybe more than once.  It takes a very long time for Diskpart to do a "clean all" command because of the size of today's drives.
A reset may reformat a drive but it is not workable for most users to be forced to wait hours for their systems to become available.
I just did a reset and it gave me the message about not removing all personal files, so if the system is being sold, to run a second reset...

3 more replies
Relevance 65.6%

Hi Guys,

I have just bought an USB external hard drive enclosure that I am trying make work.
I am using the Hard Drive from a laptop that was running on Windows XP (I believe NTFS not 100% sure) for the USB external hard drive enclosure.

I connected it to my PC which is running Windows ME (I know its FAT32). I can see the USB External Hard Drive as E. Drive but cant access my old files. When I click on the E Drive it tells me to if I want to reformat now. And that is all.

I definately would not want to reformat it, I would like to access my old files on the drive without reformatting. Please help me out with this.

Alex
 

Answer:Difficult seeing USB External Hard Drive Enclosure

9 more replies
Relevance 64.78%

I don't know what question to ask about this. I tried on another forum but wasn't understood. When I try to play videos from my hard drive I get message "There is no disk in the drive. Please insert a disk into drive.

This happened after I saved some videos to a cd. How do I correct this. I happens with all my videos now. Eventually they will play after hitting cancel or continue over a dozen times.

Thanks,
Marianne
 

Answer:Solved: Videos difficult to play from hard drive

6 more replies
Relevance 63.96%

I'm using lumia 820 with 8.1 Lumia Cyan
i got this phone 5 days ago. my build id is 3051.50009.1424.10362
my phone works good. but some times when i lock , it cant wake up. capacitive button lights are working but screen is not comes. but i can shut down phone with pushing pwr button long and sliding down.
why is this happens ? . sometimes it gives random color patterns. im sure it is not hardware problem. but it cant wake up. it happened when i update to 8.1 from 8. and when i activated glance screen , glance screen works after i locked phone . but after unlock screen doesnt comes.
look for what i tried (still doesnt fixed)
-soft reset
-hard reset
-reinstalled rom with Lumia Software Recovery Tool
-removed micro sd card
and i am not using sim card ( it is not micro. i need time to cut it )
help me pls. i love this phone so much . but this problem makes me sad
and sorry for this bad english :D

Answer:Why am I find it difficult to wake up my Lumia 820 sometimes?

Sounds like time for a warranty replacement.

3 more replies
Relevance 58.22%

When I restart my computer after it has been hibernating (usually overnight as it's left on 24/7), it goes to the welcome screen and just hangs. The HD light is inactive making me believe that the HD is not waking up and causing this problem.

Any ideas anyone ?

Answer:Hard drive doesn't wake up after hibernation

hi and welcome how long has this been occurring? have you ran a disc check, defrag lately see the pics.

3 more replies
Relevance 57.81%

I have a External Seagate 2 Tb hard drive that after a while, will disconnect and I can't wake it by trying to access the drive in Explorer. I tried rebooting my computer but it doesn't show up anymore. The only solution it seems is to disconnect the drive and plug it back in.

Any advices?

I am on Windows 10
 

More replies
Relevance 57.81%

If I'm running utorrent when I put my W7 pc to sleep, after it wakes my external hardrive will become completely unresponsive. Usb hardrive at this point will not eject properly so I have to either unplug it unsafely or reboot PC to regain control of drive. If I remember to shut off Utorrent before I put PC to sleep, PC will wake fine with ex. hardrive working fine. Anyone know a fix for this so I can avoid having to turn Utorrent off first before I put my PC to sleep?

Answer:External hard drive unresponsive when wake from sleep

  
Quote: Originally Posted by leif


If I'm running utorrent when I put my W7 pc to sleep, after it wakes my external hardrive will become completely unresponsive. Usb hardrive at this point will not eject properly so I have to either unplug it unsafely or reboot PC to regain control of drive. If I remember to shut off Utorrent before I put PC to sleep, PC will wake fine with ex. hardrive working fine. Anyone know a fix for this so I can avoid having to turn Utorrent off first before I put my PC to sleep?


If you put your machine to sleep, then all programs are suspended, so there is absolutely no point in leaving them "running". Most especially not if this causes errors on waking.

Regards....Mike Connor

1 more replies
Relevance 56.99%

Ever since I've installed a second hard drive in my T410, a Hitachi 250GB drive, my machine fails to wake from sleep (sometimes)... Then I have to do a hard reset. I had the same problem without the 2nd drive when I tried to use the HD Password in the BIOS and found out that it was something to do with the Crucial M4 drive I'm using. But this same problem is now happening ever since using the 2nd drive slot. Any ideas? I really like the extra storage space and don't want to remove it based on this problem. 





_____________________________________________________________________________________________________T410(2537) -- i7 620M - Intel HD GPU (1440 x 900) - 8GB RAM - 128GB Crucial M4 SSD - 250GB Hitachi HDD - Windows 7 & 8 Pro









Solved!

Go to Solution.

Answer:T410 fails to wake from sleep with 2nd Hard drive installed?

Quick update. It wakes up eventually if you leave the machine for about 40 seconds.





_____________________________________________________________________________________________________T410(2537) -- i7 620M - Intel HD GPU (1440 x 900) - 8GB RAM - 128GB Crucial M4 SSD - 250GB Hitachi HDD - Windows 7 & 8 Pro

2 more replies
Relevance 54.94%

. . . Macrium Reflect "fix boot errors" is saving my A**!
Between updates, on Wake from Sleep, no Wake . . .. requires hard start . . . spinning dots . . . no boot . . . requires my Macrium Reflect intervention disk . . . "fix boot errors" . . . . System then actually does Start . . .
Anyone else . . . ? What is going on?

More replies
Relevance 50.02%

Hello Thinkpad mavens,  P51s question:   Could you speculate - How difficult would it be upgrade the drive to 2TB?  Lack of 2TB is only thing that's keeping me from buying one.  

Answer:P51s: How difficult would it be upgrade the drive to 2TB?

I have upgraded the hard drive on my previous Thinkpads with very little problem.  Usually the new hard drive/ SSD comes with software that will clone the old hard drive onto the one you just bought. If you don't had a free internal drive bay, there are many inexpensive external drive connectors from online merchants, such as Amazon or NewEgg that let you plug the new drive into a USB port while the cloning is being done. Once you have the clone, use the Thinkpad technical information online at Lenovo to see how to to open the cover, remove the old drive and insert the new one. In the Thinkpads I have upgraded, all it takes is a small Phillips Head  driver. PhilIM NewsWatch

2 more replies
Relevance 49.2%

I have some degree of expeience working inside of desktop computers. I have built from the case up a dozen or so. A friend has a Sony laptop about 2 years old. He says the cdrw drive is bad. All slse is working. I know that the inside of the laptop is very crowded. How easy / hard would it be for me to replace the drive? Any source where I could fing guides etc. for laptop repairs?

Thanks

Rbuck
 

Answer:Is replacing cdrw drive in a laptop difficult?

14 more replies
Relevance 49.2%

I have set of customers who have recently moved from XP to Vista. They have an older camera that they openly use with XP without a problem. The camera is however experiencing issues with Vista.

The camera works without issue on one Vista 64-bit system, but not others. I am currently unable to get it to work on any 32-bit systems. The manufacturer has been contacted and states it should work on Vista without issue.

THE ERROR:
When attempting to access the camera via Computer, Explorer, cmd, IE, or Firefox, the user receives the error message "An unexpected error has occurred."

THE CONNECTION:
When plugged in (USB,)
- Creates a network connection complete with its own dhcp and dns.
- Maps \\self\Images\ to z:\

Comparisons have been performed between the working system and the non-working systems including the connection, the connection configuration and mapping, ipconfig /all and no differences have been found.

THE TROUBLESHOOTING:
- Side-by-side comparisons of registry, networking settings, file structure, and group policy have been performed and have found to be without issue.
- The driver is the same for the working Vista system and the non-working systems.
- Administrative/user rights or privileges show no difference in operation.
- The drive is detected by Computer and shows up as connected, however no size is listed or detected with the drive. (Drive properties list 0/0 kb)
- I am able to map the folder to other drives, how... Read more

Answer:[SOLVED] Difficult Mapped Drive Issue

The errors seem to point to a permissions issue. But I have no clue as to what needs it's permissions changed.

You may want to try SubInACL: Solving setup errors by using the SubInACL tool to repair file and registry permissions - Aaron Stebner's WebLog - Site Home - MSDN Blogs It'll reset the user permissions to default (but I dunno what it's gonna do with the mapped drive.

Have you tried taking ownership of the mapped drive?
Have you ensured that the mapped drive is shared with the current user?

FWIW - that's the reason that my wife's office still uses XP. The program that they use (a proprietary patient accounting system) can't cope with Vista/Win7.

3 more replies
Relevance 49.2%

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

More replies
Relevance 48.79%

Ok, here's the rundown.  I have a desktop that I built 2 years ago.  Everything was running perfectly until about a month ago.  Without any software or hardware changes, the system developed a problem.  Bear with me, it's honestly difficult to explain.  The most obvious symptom is with the mouse.  Sometimes, and seemingly at random, the mouse starts exhibiting weird behavior.  It never freezes or stutters, but sometimes it's like the system refuses to acknowledge that the mouse is there.  For example, I can sometimes move the cursor down to the start bar and nothing I do will have any effect.  If I move the cursor over something, they don't do that highlight effect.  If I click, nothing.  If I right click or middle click, nothing.  Meanwhile, my keyboard is functioning perfectly.  So while the mouse gets no response from trying to click the start button, I can hit the windows key on the keyboard to make it pop up.  If I try to click on an item from the start menu after using the keyboard to open it?  It closes the start menu as if I clicked elsewhere.  Sometimes when it happens, the window I was currently use starts showing this non-responsiveness.  Sometimes the window I was using is the only window that will work.  Alt+tabbing to another window gives me unresponsive windows on top.  When I click on one of these windows that fails to give a response, the window usually loses focus ... Read more

Answer:Difficult to Explain - Mouse/System Unresponsive/WTH/Drive

Nothing?

17 more replies
Relevance 45.1%

I have just bought a new Samsung S24D590L monitor for my Windows 7 desktop. It is connected to the PC with a DVI out of PC and HDMI in to the monitor. I loaded the drivers from the installation CD. All is well except if I leave the room and the PC display goes off after the allotted time, it does not return as I "swish" the mouse, as the old NEC monitor did. I have to switch the monitor off and on , then the picture returns. Is there a way of restoring the "old" way of waking the monitor up ?

Answer:New monitor hard to wake up.

According to the Samsung Manual S24D590L has an internal Off function which and I quote
*For products for the market in Europe, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to
MENU > SETUP&RESET and set Off Timer to Off.*
You haven't said how long it was on or how long it was left but it looks as if the monitor is currently powering off and will not respond until turned on again. Check the settings and turn off the OFF timer.

4 more replies
Relevance 44.69%

I have this big problem since I have received my P50 (at least for one year now). It is a 7600HQ machine with a Quadro 1000M video card. Let's say I start my day by turning on the laptop. The laptop boots. I see the Windows login screen. If I wait a little the P50 crashed very hard. The screen shows the artifact in the screenshot I have attached but sometimes I see an even color (like yellow) instead of the artifacts. The whole system is frozen. The lights on the keyboard do not react (num lock for example). So I hard reset the laptop using the power button and this repeats for around 10 times before it is booted correctly. And after this: the P50 is rock solid. It stays on for days at a time. Multiple VM's running, 32GB memory, M.2 SSD. Fully functional. So I thought it was Windows and installed Linux. This showed the exact same behavior. Some things to consider: 1. Only happens when I turn on the computer after some down time2. Once up it is rock solid3. Seems to happen more when I connect an external monitor (immediatly after connecting the cable). Both DP or HDMI show the symptoms.But I have seen it happen while using the P50 on my lap.4. All updates installed via the System Update app of Lenovo. Inclusing all BIOS updates5. Tried the hybrid or dedicated options in the bios for the video card. No change.6. It does not happen all mornings. Sometimes it boots up fine on the first try.7. Never happens in the BIOS or boot up screen. Only when the... Read more

Answer:P50 Hard crashes on boot or wake up

Look in the  event viewer and see if there is a message at the time of the problem?

1 more replies
Relevance 44.28%

Hey chaps, I've run into an issue with the Desktop Windows Manager - in short it very occasionally crashes out when I wake from sleep, which stops the monitor going on, and forces me into a hard reset via the login screen (two users - can't navigate in the dark).

I did notice what sounded like a usb plug in windows notification sound (three beep tone) if that helps.

But the error in app manager says it was DWM exiting in 'association with' my 1080Ti.

This happens once in a blue moon. Once a month at most. But it's still annoying.

I've heard such errors are a known Windows 10 bug - never had anything like this on 7.

Any known cure for this ail?

Any further info required, feel free to ask.

More replies
Relevance 44.28%

I have a M50 - 8187 Think Centre and I see on the motherboard and in the manual that there is a SATA 1 and a SATA 2 connection. I tried to hook up a SATA 2 hard drive but when I connect everything up using a SATA data cable, there is nothing recognizable in the BIOS. I took a 30 gig IDE hard drive and hooked it up as a slave and the BIOS recognized it right away. My question is, can a SATA hard drive be used on the M50 Think Centre series and if so, what do I have to do to get the SATA 2 controller recognized in the BIOS. I updated the BIOS to the latest version, but this did not help. I see no where in the BIOS to enable SATA. Any help regarding my problem is greatly appreciated. Thanks in advance!! Ken













Solved!

Go to Solution.

Answer:Installing a SATA 2 Hard Drive with the first hard drive being a primary IDE Hard Drive

You never will have to 'Enable' SATA for it to work, are you sure your plugging in the sata power cable ? The question may also be can your machine handle this drive, not can the machine handle sata. I would reccomend running a bios update, and then trying again. 

5 more replies
Relevance 43.87%

I'm new to sevenforums and would appreciate the help of some of you. I have updated my user profile with all of the details and specs of my system that is having my issue.

Recently, my computer will not wake up from sleep mode. Once it enters sleep mode, the only way to get it functioning again is to hold the power button, completely shut it off, and then boot my system back up.

It appears as if everything starts back up once I open the lid or press the power button to wake it up, but the screen never turns back on. The fan starts up, the backlit keyboard lights up, the leds all blink, but nothing I try will turn the screen back on forcing me to press and hold the power button for a complete shut down.

I have reinstalled the latest Intel HD Graphics driver as well as the latest NVIDIA graphics driver (both the stable and beta release).

I do not get a blue screen or any sort of error. Upon the restart, I am not prompted with any error from windows or any signs of the forced shut down. I have been messing with this issue for a few days now and am asking for some help from the community here at sevenforums. If you need any additional info let me know.

Thanks.

Answer:Computer will not wake from sleep, hard boot only solution

Try the steps here: Sleep Mode Problems - Vista Forums

I would also work through the Troubleshooting Steps for Windows 7

Report back the results you find for more steps indicated.

As a last resort use the tool the pro's use to find the exact cause: Gathering a Startup, Shutdown, Sleep, Hibernate, or Reboot Trace - Windows 7 Forums

1 more replies
Relevance 43.87%

I currently have 4 external hard drives connected to my computer. I have each of them set to sleep after an hour of inactivity. However, if I am using the computer, they stay asleep, until I delete something; anything. Any time I send something to the recycle bin, all four of my external hard drives wake up.

I would like for this not to happen. I already went to the Recycle Bin Properties and set each external hard drive to "Don't move files to the recycle bin. Remove files immediately when deleted" thinking that it would quit checking them for deleted files.

I would much appreciate any help on how to prevent these external hard drives from turning on when I delete files off of my computer. And just to be clear, I am NOT deleting files that are on the externals, they are files that are on the Computer.

I use these forums a lot when I have a question, but I have never had the need to post before, so this is my first post. If this is in the incorrect sub-forum, I apologize.

Answer:External Hard Drives Wake Up When I Empty Recycle Bin

I have EXACTLY the same issue, it's unfortunate no one replied to this

I also set all my drives to "Don't move files to the recycle bin. Remove files immediately when deleted" and everytime I delete a file anywhere ALL external my drives wake up

Is there really no way around this? Is no one else having this issue? Does no one else have an external drive attached to his PC that he wants to sleep while idle? Why is Windows checking ALL the RECYCLE.BIN folders on ALL drives when I delete a file on ONE drive?

It would be really great if someone knew something about this, preferrably some way around this, so the drives can stay asleep when I do not intend to access them but just delete a file on a different drive.

2 more replies
Relevance 43.87%

I have 4 Internal HDDs installed, 3 are SATA and 1 IDE, Whenever I wake my PC from a hybrid sleep the IDE drive no longer responds (slave drive) It causes explorer to freeze for awhile as it tries to access and the HD light stays lit until I reboot the PC.

Also Im unable to shutdown properly or reboot when this happens, I have to do a hard reset or hold the power button. (attempting to do a normal restart / shutdown always gets stuck at "logging off").

I never use to have this problem before, it seems to of started after I enabled Intel AHCI in my bios recently, but I didnt think this would effect an IDE drive? The drive works fine before the PC goes to sleep and no SMART errors are reported in HD Tune etc.

Any ideas appreciated.

Answer:One of my hard drives wont wake from Hybrid sleep.

If you used the intel controller to set it to AHCI mode - did you install this driver from the gigaybyte site it will update the AHCI driver and should provide correct functionality- Intel SATA RAID Driver - 10.5.0.1015 - GIGABYTE - Motherboard - Socket 1366 - GA-EX58-UD3R (rev. 1.6) i think its the latest version or equivalent version of the Intel Rapid Storage driver which is needed even when you dont have raid enabled. Note Im not 100% sure here as i have no gigabyte board and i cant unpack the driver to check it.

You could also update to the latest driver for your video card - long shot fix.

Otherwise Switch back to ide mode - AHCI is only usefull for hot swapping hard drives - if you have no need there is no speed difference as most modern hard drives have this enabled automatically. W7 should find the original driver upon rebooting if you just reset from AHCI to IDE mode in the bios.

If you used the microsoft fix, to be sure of success, follow this path in the registry : HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci - then right click start - modify and change from 0 to 3 - then go to bios and reset back to IDE mode and reboot.

2 more replies
Relevance 43.87%

If this is in the wrong forum, please move to the correct forum.

I am running windows 7 64 bit, and have 4 external hard drives attached (not the best way, but until I can afford a server, the only way).
I am using my computer as a media center only.
When I wake my computer it can take a while (30 seconds to a minute), before I can use it, due to it starting up my external hard drives, but I have noticed a couple of times, my computer will wake without starting up my external hard drives (able to use media center within 2 seconds).
Does anyone know if there is a way to get my computer to wake up without starting up the external hard drives every time?

Answer:Wake computer without waking external hard drives

Switch them OFF.

7 more replies
Relevance 43.46%

Hi all,
 
I am attempting to install Win7 in an Inspiron 1545 with a new SATA hard drive that was purchased. When i insert the drive, I get "Internal Hard Disk Drive Not Found." I have verified the drive is not showing in the BIOS, I've already attempted to reseat the drive several times. In addition, I've attempted to load the chipset drivers, SATA drivers, etc from Dells website, the drive still does not show in the OS install when booting to DVD or in bios.
I dont believe it to be an issue with the new drive, as I plugged the new drive into another model Dell laptop and it recognizes the drive fine in BIOS, also I can still boot to the previous hard drive in this laptop without issue when i plug it back in.
Is there a specific driver, etc that I need to use for the drive to be recognized or other thoughts people have?

Answer:Inspiron 1545- replacing hard drive, new SATA drive not found "Internal Hard Disk Drive Not Found

This is strange - either the new hard drive has a rare compatibility issue with your onboard controller (I use a 500Gbyte in my 1545 without probs)) or it is a mechanical problem.I would take a close look at the physical dimensions and compare your original hdd with the new one.Watch the video (even though it's about a 1525 (similar to an 1545) and an SSD hdd) -  go to 2:20

10 more replies
Relevance 43.46%

Hi guys, (first post here )... I was highly impressed with some of the deeply technical answers on this site, so I'm hoping someone can help me narrow down to the cause of this issue I have, and possibly help me learn something about system software and firmware

So some time ago I acquired this MSI P45 platinum third-hand, and it has been living up to its name. However, it does not sleep and wake up properly.

To be specific, it looks like it sleeps properly, but doesn't wake up properly. The lights and fans start up, but one of 2 things happen

1) the POWER LED doesn't light up, only the HDD LED (strange)
2) the POWER LED lights up, the HDD LED doesn't work

Either way, no display. or any activity I can cause through the keyboard. I'm on BIOS 1.7b14(official Beta BIOS) (A7512IMS.17E). It didn't work with 1.6(official release) either. It doesn't seem to be any known bug.

I've tried a bunch of things, but I would like to try steps systematically once again, in case I've missed some combination. So, what could be the issue, and what can I check?

Answer:MSI P45 Platinum doesn't wake after sleeping, hard reboot required

Hello Milind, and welcome to Seven Forums.

You might see if using the tutorial below to add AHCI Link Power Management to your power plan settings, and set it to HIPM+DIPM may help.

AHCI Link Power Management - Enable HIPM and DIPM

Hope this helps,
Shawn

5 more replies
Relevance 42.64%

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

Answer:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

2 more replies
Relevance 42.64%

Hey guys, kinda new here, hopefully I'm posting this in the right forum section.
I'm not that super oriented with computers, I'll give it my best shot to explain what's going on here.
In short my PC just won't start. The light turns on, it boots up, and then I get a black screen with text referring to either "Start Up Repair (recommended)"
or
"Start windows normally"
If I choose start windows normally, it brings me to the black booting screen with the windows flag, then it proceeds to go back and restart the system, going back to the black screen. OR More likely it just stays stuck on the glowing windows flag.
This also occurs if I press F8 and go into safe mode. After listing all the components before going into safe mode, it simply restarts itself and goes right back to the black screen of the two choices.
If I select Start up repair, a grey loading bar appears below that on occasion freezes. If I manually reset the computer try it again, I get to a blue windows default background screen and the message
"Startup Repair
Your computer was unable to start
Startup repair is checking your system for problems...
If problems are found, Startup Repair will fix them automatically. Your computer might restart several times during this process.
No changes will be made to your personal files or information. This might take several minutes.
Searching for problems.. (this is beneath a blue bar that has been going on for at least an hour)
There's also a Dos window... Read more

Answer:Windows 7 won't boot past possible broken Hard drive attempting to recover/clone/copy hard drive

It sounds to me as if your Operating System has been damaged beyond repair, and that you only option would be to re-install your system using the 'Return to Factory Settings' facility provided. Unfortunately, this would mean you would lose all you data, and, from what I can tell from your posting, you have not taken a back-up so you cannot repair your PC at present.
You first need to remove your heard drive and connect it to a working PC either as slave or in a caddy, and use this to copy all your data onto a new external device.
OR
Once connected to another device, you could partition your Hard drive and copy your data into a second partition.
Once you have your data copied, return the HHD to your own PC and re-install your system from scratch.

10 more replies
Relevance 42.64%

We have an Asus v6-p7h55e, windows 7 prof 64bit which shows an annoying fault.
After going to sleep it will not totally wake up, but keeps hanging at the LG DVD drive.
The drive makes repeated sounds like it is in action (no dvd in it) and keeps on doing so, till I power of the pc (power button). After a restart it reaches the windows screen and then the screen goes black. After powering off again it will start without complaints.
According to the shop this is a known Windows problem.
Our other two computers (also desktops) very seldom show this behaviour.

Does someone know the cause and solution to this problem.

Thanks.
Stephan

Answer:LG DVD drive and windows 7 - wake up problems

Can you enter BIOS and have a look at the boot drive priorities please?

4 more replies
Relevance 42.23%

Hi there,

So in April I decided to go all in on an Alienware 18 which I use for business and pleasure. After a couple weeks I started noticing the computer would not wake from sleep during extended times such as over night. I would simply close the lid at night and open it in the morning where the HDD light would come on and then the computer would be frozen in a state with a black screen before bootup where I am forced to hold the power button down to reset. It would then tell me that the computer was shut down incorrectly etc.

I finally had Dell tech support work on it who were absolutely fantastic at the time. They went through all kinds of system setting changes including how the computer sleeps, updated video and MANY other drivers including a reinstall of windows. Problem persisted.

Next they sent a tech out to replace the Video cards... problem persisted.

Next they replaced the HDD's, motherboard, and video cards again... problem persisted.

They were completely stumped so they sent me a brand new system which is even better than the last one I had!

After a few days I noticed this system is doing the exact same thing. I called tech support and the original guy is now in another department so I'm dealing with a new guy now who is starting from scratch again with this system. I spoke with their manager as this guy wanted to reset the computer to factory again and he also suggested that they are 99% sure that a reinstall of windows (or an alien res... Read more

Answer:Invisible BSOD on computer wake after long periods - Hard reset needed

Welcome to 7F.

Your dumps ared indicating a device driver as being the problem but none are showing.

Driver Verifier will stress your drivers and cause BSODs if any fail and will flag them up in the dump files. Follow this tutorial to enable/disable it. Driver Verifier - Enable and Disable



   Information
Enable Driver Verifier but only enable these options:
Standard settings and IRP logging step 3.
Don't enable Force Pending I/O Requests



   Warning
Make a System Restore point before enabling Driver Verifier.



   Note
Your system will act very sluggishly while DV is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

9 more replies
Relevance 42.23%

Hi, I bought my ThinkPad T400 (2767wc8) a little less than year ago and have been running it since with Windows 7. Everything worked fine until I decided to install a bigger hard drive. The old one was Seagate 250GB 5400.4, so I thought it would be safest bet to go with another Seagate and bought 500GB 5400.6. Installed Windows 7 64-bit on it and all the necessary drivers from Lenovo. Otherwise no errors or anything but now and then (many times a day) the computer just randomly reboots and gives 2100: hard drive initialization error when trying to boot and keeps repeating the error until I shut down the computer and start up again. Then it boots normally. I looked in event logger and found no error concerning the hard drive. I tried Lenovo's hard drive firmware update CD (newest version, http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63685 ) but it said there's no need to update the firmware and would not do anything. My firmware is 0001SDM1 and the one on Lenovo's CD is 0008LVM1. BIOS is the newest version 3.09. Active Protection works fine. edit: I think installing the firmware would solve the problem, but I can't install it. Is there any way to force it?  

Answer:T400 random reboot + hard drive initialization error after changing hard drive

Hi Ziltoid,After seeing plenty of posts on this problem I would suggest returning the drive and getting a replacement for it.http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/quot-Error-2100-Hard-drive-initialization-erro...http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/X-61-Type-7762-Tablet-HDD-Initializatio...http://www.google.com/search?hl=en&safe=off&client=safari&rls=en&q=+site:forums.lenovo.com+hard+drive+initialization+error&ei=mFgSS72gKYvQtAPTitXBAQ&sa=X&oi=forum_cluster&resnum=1&ct=more-results&ved=0CAwQrQIwAAHope it helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

3 more replies
Relevance 42.23%

hi im costac19, new to major geeks im trying to swap my 80gb sata hard drive for a 320gb samsung ide hard drive how do i do it? are the cables the same and how do i swap the data from one drive to the other. thank you to any one that can help a new member and a novice upgrader.
 

Answer:i wont to swap my 80gb sata hard drive for a samsung 320gb ide hard drive. i a

Hi

No the cables are not the same, SATA and IDE are very different.

So ground info is needed though....

What motherboard do you have, make and model?
If you dont know this info then Everest Free will help just tell us what is listed under Computer > Summary > Motherboard

or tell us if this PC is a OEM build as in HP, Sony, Dell etc again model and version number is needed.

These days most or majority of motherboards that employ SATA only have 1 at most IDE connections, so if your using 2 CD/DVD drives the connector capacity will be full.


If you do have a spare IDE connection, then my advice to you is to keep the SATA drive as the primary C: drive ( as they are faster in data transfer than IDE ) and use the ID drive as storage, so once the IDE drive is installed copy all your normal data/music/video/image etx files to the larger drive and just use the SATA for the OS and applications.
 

7 more replies
Relevance 42.23%

My T410i hard drive died, I have Windows 7 Home Basic OA key, but how to install on new hard drive? I had to replace the hard drive, I realise from the help pages I should have written down the error messages before replacing... Either way I am unsure how to obtain the Windows 7 Home Basic software to re-install.I have the key, where should I go - the microsoft site says it came pre-installed so I need to contact the supplier - Lenovo, but on the product list T410i is too old and not listed. Thanks in advance for you time.CheersPaul

More replies
Relevance 42.23%

I'm amateur pc user. Been trying fix problems all week. Changed power box due to over heating, used AVG & Superantispyware. Keeps asking to reboot and choose boot device, and several hints of mysterious behavior inside machine. Feels like something is eating it (paranoid spirituality). Anyone know what's going on. Please be gentle with me;Logfile of Trend Micro HijackThis v2.0.2Scan saved at 14:43:58, on 30/04/2010Platform: Windows Vista SP2 (WinNT 6.00.1906)MSIE: Internet Explorer v8.00 (8.00.6001.18904)Boot mode: NormalRunning processes:C:\Program Files (x86)\IObit\Advanced SystemCare 3\AWC.exeC:\Program Files (x86)\ASUS\AASP\1.00.61\aaCenter.exeC:\Program Files (x86)\SUPERAntiSpyware\SUPERAntiSpyware.exeC:\Program Files (x86)\Kontiki\KHost.exeC:\Program Files (x86)\IObit\Advanced SystemCare 3\Sup_SmartRAM.exeC:\Program Files (x86)\DT Utilities\DT Utilities PC Backup Pro\mgCtrl.exeC:\Program Files (x86)\Common Files\Java\Java Update\jusched.exeC:\Program Files (x86)\AVG\AVG9\avgtray.exeC:\Program Files (x86)\Entriq\MediaSphere\EntriqMediaTray.exeC:\Program Files (x86)\Entriq\MediaSphere\3.8.2.9\EntriqMediaServer.exeC:\Windows\Integrator.exeC:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exeR0 - HKCU\Software\Micr... Read more

Answer:Unknown problem,system restore&recycle bin&2nd hard drive vanished, 2nd hard drive

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 42.23%

I recently used my system image disk to restore on a new (larger) hard drive but now when I look at the hard drive from the computer view it shows my hard drive as being the same size as the old one instead of being the size of the new one. I'm not sure
I'm making much sense so I will post a picture...

Is there anyway to fix this? Does the drive really only have 286 gigs on it?

Answer:System Image disks installed on new hard drive show new hard drive same size as old one

You have to be logged in as Admin to perform these operations.
Go to Start, and in the Search box, type in DISK MANAGEMENT. Pick the Control Panel item "Create and format disk partitions." Once Disk Management comes up, right-click on the area of your disk and select "Extend volume..." Move it out
as far as you want, making the whole thing one drive.
If that doesn't work for you, then you can download Easeus Partition Manager Home
http://www.partition-tool.com/personal.htm  and create a boot CD from it that will accomplish the same thing (and more, if you want to read up on it). It's a free program and works
with 32- and 64-bit Windows. I like it and use it myself.

SC Tom

4 more replies
Relevance 42.23%

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel(R) 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thank... Read more

Answer:Wake on Ring problem - Fax modem fails to wake PC reliably from standby

I may not be able to help, but I am curious - is this a dedicated telephone line?

If not, what services do you use, like call forward, messaging, call waiting, etc.

Or does the dedicated line have anything like that that you know of? (or didn't know of)

9 more replies
Relevance 42.23%

I've started to have a number of debilitating problems with my lumia 950, which is a shame because they are the same problems that made me leave android for the WP platform. To start off, my phone has been randomly restarting. The restarting seems to have started after the anniversary update version 1607. There's nothing common between one reset to the next, just that they become more frequent as battery life reduces (starts at around 80%). This is also sometimes accompanied by a streak yellow across the screen. I don't know if this is relevant or not.
My second issue, which has been happening the longest, is that the screen will sometimes be completely off when I wake up the phone. I will put the phone into sleep with the power button, and when I wake it up with the power button the screen is black. I know the phone is awake because windows hello will try to sign me in. I have reason to believe that the touch digitizer is also still working. This is fixed either by trying to sleep cycle the phone or by holding down the power button until the phone prompts me to power it off. This seems to wake the screen up. the screen also sometimes wakes up when windows hello signs me in, but this is rare. This problem has become less frequent since the anniversary update.
My third problem is that sometimes the touch digitizer doesn't work on wake. This is similar to my last problem, except that it always goes away by sleep cycling my phone. This problem has also become less prominent ... Read more

More replies
Relevance 42.23%

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

Answer:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

9 more replies
Relevance 42.23%

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel® 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thanks.

Answer:Wake on Ring problem - Fax modem fails to wake PC reliably from standby - how to make 100% reliable?

Please see more details (and post your reply) at http://www.bleepingcomputer.com/forums/ind...hl=wake+on+ring(By the way, I'm up to BIOS A16 but does not help.Thanks.

1 more replies
Relevance 41.82%

Hello. I'm looking at this laptop: http://www.dell.com/us/p/inspiron-15-3542-laptop/pd?oc=fncwg2327b&model_id=inspiron-15-3542-laptop

I would like to know if it has wake on LAN and wake on RTC or not.
 

Answer:Solved: Dell Inspiron 15 3000 Series - Wake on LAN & Wake on RTC?

Since I did not get an answer here, I went ahead and ordered the machine anyway, and took a chance. It does NOT have either feature in it.

It passed my other tests, so I'm keeping it and the next computer I get will probably have both of those features, but for this one, I guess I'll live without, since the network isn't finished to the point where I could actually use it anyway yet.
 

1 more replies
Relevance 41.82%

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

Answer:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

1 more replies
Relevance 41.82%

I have a Z60m, after 3 years an 2 months (it had 3 year warranty), had a blue screen  and could not recover. So I got a new hard drive from Lenovo. How do I transfer programs such as Inter video DVD, Disk copy and MS office which I have on old hard drive to new one ? I don't mind if I got all the settings the lap top came with 3 years ago, but I had added MS office (and now lost the purchase key code to download it again) Thank you.

Answer:Z60m - transfer intervideo DVD, diskcopy, MS office from old hard drive to new hard drive

maybe you could use something like Acronis True image.

1 more replies
Relevance 41.82%

Hello,
I am trying to move all my files from my computer to my new external hard drive, but whenever I try and move a file over 4 GB in size i get this error message...
"The file is too large for the destination file system"... anyone know how I can get around this so I can move those files over?
 

Answer:Problem transfering large file from hard drive to external hard drive

Get ahold of some software that will break up the file into chunks.
 

1 more replies
Relevance 41.82%

Hi,
I REALLY hope someone out there can help me with this!

I have a failed hard drive/ stuffed partion, and i DESPERATELY need the data from it!

A computer was brought into me with two hard drives. The owner asked me to set up a duel boot with vista and XP on the first hard drive, and to leave the second hard drive alone (its his backup drive with all his photos, movies etc) I was working away as per usual, when i noticed the second hard drive was no longer coming up in Windows Explorer. Well it was, but not correctly. whenever i clicked on it it said 'would you liket to format the drive?' obviously, i didnt want to do that.

I ran Partition Magic 8.0 which showed the drive was only 8Gigs (it should have been 1T or 1000Gigs) Partition Magic also said there was a problem with the drive and offered to fix it. I agreed, however there was no change.

I've run a number of programs to try and fix the drive:
Acronis Disk Director Server 10.0
Partition Table Doctor 3.5 Demo
Dtidata Partition Repair Tool
MHDD
Recover My Files v3.98
FileScavenger.

However, all the partition repairers claim that the drive is only 8 Gigs, and they can go no further. All the File Recovery Programs will only scan for 8 Gigs, and thus, i can not recover my clients precious photos and videos.

The BIOS comes up as recognizing the drive as 33Gigs?

I really REALLY need the data from this drive! Does anyone know how to fix my problem?

Thanx heaps in advance,

Ben
 

Answer:Solved: Hard Drive/ Partition Problems! My 1T Hard Drive appears as 8Gigs?!

I've used ZAR to recover files from a RAID box that seemed to have been corrupted due to a bad power supply.

You might check it out. It's free. Meaning it will only allow you to recover so many files at a time. I bought it, and like it.

They have a forum that is monitored quite often, from the developer too.

Good luck.

http://www.z-a-recovery.com/
 

3 more replies
Relevance 41.82%

I backed it up using thinkpad rescue & recovery, then copied the backup to the hard drive, again using rescue and recovery. Is it normal that backing up my hard drive to an external USB wiped it?  i imagine it reformatted it.   A few questions: Can i use the hard drive for other files now? or will they be re-wiped with a scheduled backup?are there built-in tools to recover? (any recommendations?)can i put the backup in a directory off the root folder?  it is all a mess straight off the drive. any other advice appreciated. Thanks!

Answer:X200s - Backup to USB hard drive wiped the hard drive. help needed, a few questions

When you back up to a USB hard drive for the 1st time the disk will be prepared to make it bootable and it will delete other files that are on it. You should be able to recover your files using application like the one at http://www.recovermyfiles.com/, I used that one in the past and it worked a treat. If you want to back up to a USB hard I would not suggest you add other files on that drive manually but use it only for the thinkvantage backup.

2 more replies
Relevance 41.82%

I had a thread earlier and forgot to ask a couple of questions.

I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer.

Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.

However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?

If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable.

I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it.

How ever if someone could give me a couple or three scenario's with ide cables and hooki... Read more

Answer:Solved: windows xp hard drive with win98 hard drive-question if someone has time??

Yes - you understand it correctly
 

3 more replies
Relevance 41.82%

The "Help Me decide" link says the following :  Boost your notebook's performance by up to 5x that of a standard 5400RPM drive alone.The Micro Solid State Drive (SSD) works in tandem with your PC's standard hard disk drive (HDD) to deliver both the storage capacity of a HDD and the snippy responsiveness of a solid state drive ? all at a cost significantly lower than standalone SSD notebook models. The 64GB Micro SSD occupies the notebook's PCIe Mini Card slot.  With a micro solid state drive, will my computer still boot faster than a regular plate drive?  What about compared to a SATA SSD?? Will the operating system be loaded on the Micro Solid State Drive when the system is delivered?  Edit : A Lenovo rep just told me the following : "With the Micro SSD drive your system will boot up a lot faster-very similar to having an SSD drive.   The OS however is not loaded on the drive however a lot of the loading files are which helps the system to boot up faster."  Now another Lenovo customer service rep is telling me something different.  Not surprising.  He says getting the SSD will not improve boot time.   Why do people make up answers?   Who is correct?  Why wouldn't they just install the OS on the SSD?  64GB should be enough.  





______________________________________________________________Machine Type: M90z AIO ; Product: 3... Read more

Answer:M92Z : Micro hard drive option > 2.5" 64GB SSD mSATA Hard Drive

I got the M92z 23 inch AIO with Touchscreen recently (well i am using it right now). 
 
-> mSATA -> basically a SSD that fits into the mPCIe slot. 
 
http://www.flickr.com/photos/[email protected]/7782185634/  <-- this is the mSATA i took out of mine M92z AIO. 
 
Operating system won't be loaded onto the mSATA from the factory, but you can do it yourself using aftermarket Win 7 ISO. 
 
The reason why OS is not installed on the mSATA is due to space restriction, with the recovery partition and the OS + drivers installed it is already 40 gigs gone from the 60 gigs mSATA, which makes it useless as a main drive. 
 
Lenovo m92z uses the mSATA as a cache drive for the main hdd, it does boot faster if optimised properly. But it is never going to be as fast running the OS from the mSATA or from the SSD installed into the system. If you don't use the optical drive, i suggest you get an aftermarket ultrabay adapter (12.7 mm thick) and install a ssd into that slot, i am planning to do it. 
 
Alternatively, go and get a really big mSATA SSD like 128 gigs or 256 gigs mSATA, and install the OS on that. The 64 gigs mSATA shipped M92z is too small, unless you choose to install only the OS on the mSATA, and all the applications on the main hdd. 
 
The only reason i got my M92z with the 64 gigs Samsung mSATA was the fact that it was only a 10 dollars add on (a pricing error). 
 
Here is the internal l... Read more

9 more replies
Relevance 41.82%

I have a sea gate 300 gig hard drive and I cannot get the space/size on it to change. I've re booted, taken it in and out and tried different computers but they all think that there is 138 gigs free of the 300. I have a folder of stuff that has said "24.3 gigs" via properties for about a week now though I can open and close the files, play videos in it, and have added about 15 gigs of stuff to the folder. About 3 months ago I created a partition and made most of the 300 gigs FAT32 so I can play it on my ps3. I've had no issues until now. Also, I have the exact same hard drive also in FAT32 and it suddenly will not show up and it appears to be doing the same thing. When I delete files from the folder, the image still shows as it being filled with that file (on my computer). Though moved files etc still work with no issues on my computer.

I have vista, if that makes a difference.
 

Answer:Hard drive space on portable hard drive won't change even when I add and remove gigs

Re: Hard drive space on portable hard drive won't change even when I add and remove g

Also, it won't show up on my usb dvd player as of last week. Though as I said, both come up fine on my computer.
 

4 more replies
Relevance 41.82%

I have two laptops, a ThinkPad T30 and a Latitude C840 (they are both working with XP SP2, except the T30 doesn't have a screen). I'd like to move the T30's drive into the C840, but when I do this, the C840 will hang right after the BIOS screen (incl. the XP CD's Press a key to boot off the CD if I tell it to boot from the disc drive first).

My first thought was to try Recovery Console from the XP CD. I can log into the install, and I've already tried fixmbring and fixbooting it. This doesn't help.

This leaves the option of the drivers not being right. I installed the C840 chipset drivers, nothing.

I'd really rather not go on a wild goose chase trying to figure out what'll get things up and running, so can you guys gimme a suggestion?

Thanks!
Ethan
 

Answer:Moved hard drive and cannot boot; hard drive accessable from Recovery Console

You can't simple move one drive from one machine to another because the drivers are specific to the hardware. Did you receive recovery CDs for the Latitude? If so, you could use them to "restore" it to its factory default with the new drive. This may actually be on a partition of the hard drive.
As an alternative, you could create an image of the original drive and restore it to the new one using some freeware such as DriveImage XML. To restore the image to the new drive, you'll need to boot to a bootable CD using something like UBCD4WIN and restore the image from somewhere on your network.
 

2 more replies
Relevance 41.82%

Hey guys!

My Zune 80gb stopped working a while back. It wouldn't charge. So I thought I would take out the hard drive and use it as an external 80gb hard drive. So I bought an 1.8" ZIF encolsure for it and installed the hard drive into it.

All appears good with the installation. When I plug the hard drive into the PC the light on the hard drive enclosure comes on and stays on & the disk starts spinning. Then Windows Vista does the whole "Install new Hardware" thing and calls it a "Disk Drive" and a "USB Mass Storage Device" and says hardware is installed and ready for use.

But the problem is I can't seem to access the drive. I can't find it anywhere. It doesn't show up as a drive I can use or anything. I tried a third party partitioning prgram to try and find the disk so I could reformat it but it wouldn't it couldn't find it either. I even plugged the drive into my Mac thinking that Disk Utility might be able to recognize it and let me wipe it, but the Mac doesn't recognize it as anything.

Back in Vista, Using Device Manager, Vista notices the drive under the "Disk Drives" option as a "Disk Drive" and that it is elecronically signed by Microsoft (since it has the Zune firmware on it) but I can't do anything with it ... And this is the only place where I can see that the drive even exists. I can't reformat it or anything.

Can anyone help me? I thought I read somewhere... Read more

Answer:Putting a Zune 80gb Hard Drive in an External Hard Drive Enclosure, help please!

anyone?
 

3 more replies
Relevance 41.82%

Hi,

I am in the process of doing a clean re-install of Windows XP for Home on my PC. I have 3 hard drives:

c: 200gb Maxtor SATA drive - bootable with Windows XP (existing Windows install)
d: 20gb Maxtor IDE drive - non bootable data drive
g: 160gb Maxtor IDE drive - bootable with the clean install of Windows XP for home on it

Windows is not seeing all the sizes quite right yet but I will tackle that when I have solved this major problem that follows:

If I boot from the C drive - I have no problems at all. Windows will see all the different drives as it should do, I can access them all and they all work fine.

When I come to boot the clean install on drive G windows changes the drive letters - G becomes C, D remains as D but the 200gb Maxtor SATA drive isn't seen at all and might as well not exist.

Disk Management within Windows is no help as it can't see the drive, Maxtor software MaxBlast 4 is also no help as it can't see the drive on this install either.

I have checked and rechecked the BIOS but have pretty much discounted any issues here as it clearly shows all 3 drives and all 3 drives are listed on boot up. It's just when Windows kicks in that I have the problem.

I guess it's a simple setting somewhere, but I am pulling out what little hair I have left trying to think what it is - so any ideas would be very gratefully received.

Thanks in advance and kind regards

Stuart
 

Answer:Hard Drive Bootup Problems, Help required - Windows not seeing new hard drive Options

Hi
This is what I would do to enhance performance and storage strategy:

1. Use the 20g for the os and housekeeping utes such as av, spyware, etc only, nothing else goes on that drive.
2. Use the 160g for apps installs.
3. Use the 200g for data.

This might get you past the bios/firmware/os/drive letter issue and make better use of the drives. The 20 isn't really good for storage anymore, but would be great for an os/system ute drive. It's performance is less than the other drives, but that's ok, most of the os will stay in ram anyway after boot, you won't make any real diff having a faster os drive.
You might want to place a pagefile on each drive so pageing can occur concurrently too.
 

7 more replies
Relevance 41.82%

I have a customer's Satellite L305D S5895 laptop. This was shipped to me by the customer who tried to install Windows XP Pro, Vista and none would install. He said he tried all installation CDs he had and finally gave up on it and shipped it to me.

When I got it the partition were deleted so I tried to install Win 7 and when I do doing a custom install I get an error saying the hard drive can't be formatted on disk 0 or it will give an error that no hard drives were found.

I reset the bios to default and no matter what I do it won't format or find the harddrive. I was going to upgrade the bios but the only way I found to upgrade the bios is after windows is installed. There is no way to make changes to the bios for settings that would have to do with the hard drive. This has a Toshiba MK2546GSX (S1) hard drive.

When installing Win 7 I get the normal windows, "windows is starting", "Select Language", "Select System", "Type of install", "Custom Install", "Delete partitions", "New Partitions", "Format", then the error message "Windows cannot format a partition on disk 0. Error: 0x80070057"

This happens regardless what system I try to install. I've tried two different versions of XP, one of Vista and 3 Win 7 and each time a different install CD.

System Specs
AMD Turion (TM) 64 x 2 Mobile CPU
CPU Speed 2.00 GHz
Toshiba MK2546GSX (S1) hard drive
Pioneer DVD-RW DurkD08l... Read more

Answer:Solved: win 7 can't find hard drive or can't format hard drive on clean install

16 more replies
Relevance 41.82%

Windows XP Professional Service Pack 2 (build 2600)
2.20 gigahertz Intel Pentium Dual
64 kilobyte primary memory cache
1024 kilobyte secondary memory cache
WDC WD1200BB-00FTA0 [Hard drive] (120.03 GB) -- drive 0, s/n WD-WMAET2099978, rev 15.05R15, SMART Status: Healthy


Hard drive #1:
Just a few weeks ago my hard drive started clicking and suddenly my system froze. The drive wasn't dropped, bumped, or anything like that. It was fairly new as well. I was having some issues accessing my files AND I couldn't access the internet through any browsers. I was connected, could play internet-using games, but got no reply from websites. I decided to reformat. Well, that didn't go so well. Reformatting did not fix the freezing issue nor did it fix the internet issue. I attempted to reformat the partition on C but it simply wouldn't let me.

Hard drive #2:
I pulled out a newish hard drive and formatted it, installed my applications and continued on my way. Everything was working great, until a day later when the hard drive AGAIN froze in the middle of a session and this time I couldn't even boot. I was getting a boot error that mentioned not receiving a boot file name. I went into the windows repair console and did a chkdsk which turned up a few errors (and attempted to recover them I assume). I could now boot, but random freezing would still take place now and then and EVERY DAY I have to access the repair console due to boot errors. Almost every other attempt to boot resul... Read more

Answer:Multiple hard drive boot errors, hard drive clicking, and freezing

Try installing another operating system onto the disk and seeing if that crashes as well. If it doesn't you probably have a bad Windows cd. I suggest trying Kubuntu, a version of Linux meant to look somewhat like Windows (You can click here to skip directly to the download page). Just remember to actually install the thing. Most Linux operating systems can be ran directly from the cd without any need to be installed onto a hard disk. There's usually a program on the desktop that will install the system for you. If it runs properly for a week or two, get a new Windows disk. If it crashes just as much as Windows did, get a new computer.

Also, how much RAM does your computer have? If it's very low (256-512 megs or less) it can sometimes cause these kinds of crashes too.

2 more replies
Relevance 41.82%

Hey guys, I was working with my grandfathers computer. The computer would not boot, it kept getting the BSOD with "Unmountable Boot Volume" At the top. Annoyed, I decided I was going to just back up whatever files were on it (Just his favorites, he has absolutely no documents or anything else)..by plugging his HD into my home PC as a slave and copying them to my flashdrive. Then I would reinstall XP Home on his Desktop, and use the flashdrive to put back his files...Sounds easy enough right? NO!!!!.....Problem is, his user account on the computer (Ralph), was Password Protected so now when I try to access any of his files (using Windows 7) I get a message saying Access Is Denied. How do I get around this. It is not possible to boot his old computer to take off the password. Are his files recoverable?
Thanks for any help!

Answer:Recovering hard drive files from unbootable, password protected hard drive?

You don't have to do all that to overcome an unmountable boot volume error...try running chkdsk /r command on the drive.

Start/Run...type chkdsk X: /r (where X is the drive letter assigned by XP and with spaces between k and X: and X: and /) and then hit Enter.

Louis

1 more replies
Relevance 41.82%

I see it can be done from an installed to an external, but can it be done in reverse, taking the external cased hard drive and cloning it to an internal? The old hard drive is from an xp laptop, and I can aquire another xp laptop if I can clone this way. Perhaps if I set the enclosure hard drive as master? All ideas are greatly appreciated. Many thanks
 

Answer:Clone a laptop hard drive from an external case to an internal hard drive

6 more replies
Relevance 41.82%

To those in the forum I recently damaged my thinkpad edge laptop 15" after not long ago having to reload every program and everything onto it, it takes me sometimes a week to get things back to normal. It's damaged irrepairably but the hard drive is Ok. I've now bought a thinkpad G570. Can I simply replace the hard drive int he G570, with the pre-loaded harddrive from the THinkpad, and will it just load up and work? The solution that has been offered to me so far ist to buy the sata -usb cable, and attach the old hard drive to the new g570 and go through the one key recovery and transfer the whole system that way. Any ideas would be great. I'd prefer just to swap the new hard drive for the old.  

Answer:Replacing Ideapad Hard Drive with Pre-loaded Thinkpad Edge hard drive

Hi, RichardBarclay
 
Provided the hard drives are the same size and use the same connection, there is no reason that the new computer shouldn't recognize it. And provided the new hard drive is simply removed and not touched until you're sure the old hard drive works, then there shouldn't be any danger in trying. If, for some reason, the old hard drive doesn't work in the new computer, then I would recommend getting a SATA-USB cable to simply transfer the files. And you may want to do that anyway as it is, in my opinion, a useful device to have in case you ever want to transfer data between drives again.
 
Best of luck,
Adam
 
 
 





______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

1 more replies
Relevance 41.41%

When I put my computer in sleep mode, it won't 'wake up'. I have to manually turn off the computer and then start it up again. This has happened twice. I'm not putting it into sleep mode until I find out what's wrong and that's exasperating as I normally leave my computer on all day so I can periodically play my games.

Answer:Computer won't 'wake up' after sleep mode with Windows 10, how can I wake it?

I'm having the exact same issue. No idea what to do.

5 more replies
Relevance 41.41%

I need an external hard drive for taking regular backups of all of my data.
When i searched the internet I got two options:
1. Porable HDD [high cost, slower speed but don't need external power]
2. Desktop HDD [low cost, higher speed but need external power]

I want to know that...
1. Which hard disk's live longer? Porable or Desktop.
2. I heared that pulling off USB cable of Portable HDD may cause data lose because it also supplies power to hdd.
What will happpen if Power goes off from Desktop HDD? Will my data/Hard disk remain protected?
3. Level of safety of data on moving or shaking on both Desktop and Portable HDD.
4. Can we install os and boot from portable and desktop external hdd?
 

Answer:Need Advice : External Desktop Hard drive vs Portable Hard drive?

Unless you really need to go portable with a Laptop .. I'd not use a USB powered External.
You cannot boot from a USB External .. But there's another option if you're capable of physically changing HDDs ..

Get a good external Enclosure (with a fan for cooling) .. Install a good HDD ... with a 5 year warranty
and make the HDD in the enclosure a bootable backup .. where you could swap HDDs if/when needed ..
 

1 more replies
Relevance 41.41%

Like a bafoon, I think I may have tapped or banged on my mouse pad too hard on the laptop and damaged the hard drive. Laptop comes on, and you see the "Lenovo" trademark flash real quick like normal, but instead of going to my baground with the "sign in" slot with password, it just stays black. You can see the screen is lit up but it just stays black, but will not start up (Windows). My recovery button won't even work and I can't retrieve files and just want to start over with new hard drive. So, when installing new hard drive with nothing on it or empty hard drive (no windows, no files, no operating system, a hard drive fresh out of the box) what operating system DVD's do I need to get computer up and running again? This was a Lenovo N586 Windows 7, 64 bit laptop, scratch and dent buy, so I did not get the operating system DVD's when it came from Lenovo.

Answer:Installing new hard drive, Need to know how to install opetating sytem, Old drive hard gone.

Read this link (http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/windows-8-installation-disk/m-p/1827302#M14... about the media creation tool.

2 more replies
Relevance 41.41%

I recently formatted my c drive and now i am reinstalling all the software. I keep all the setups of software in my external hard drive. For installing the software I coy the setup folder of the required software on my laptop, then install it.

Is straightaway installing the software by accessing the external hard drive okay? Does it make any difference in the installation time or any reduction in life of hard disk performance.

Or should I always install through my laptop hard drive?

I am running windows 8.1 pro

Answer:installation software from external hard drive or internal hard drive

Your method is as good as any. If it works, keep doing it.

1 more replies
Relevance 41.41%

my hard drive crash and i just bought a new hard drive. but i dont have a windows cd only product key on my desktop case.how can I install windows on my new hard drive?

Answer:hard drive crash... install windows on new hard drive withou...

Galilee Hello;Allow me to welcome you to the HP forums!I read your post about wanting to restore your PC and wanted to help -- but need more information. Your PC did not come with Win10 preinstalled, so if you were to order HP Recovery Media and use that, it would restore the original operating system, drivers, and HP utilities.  I presume this is NOT what you want, right? So, while you can make Win10 media to recover your PC, it would be a clean-install and nothing would be preserved. You can make such media using this tool: Installing Windows 10 using the media creation tool - Windows Help Note that when you go do download and build install media, the tool defaults to matching what is already installed on your PC (as in, Home for Home, 64-bit for 64-bit).  While you CAN change these settings, do NOT. If you do, the resulting media will be different and will force you to enter a NEW product code! Good Luck 

1 more replies
Relevance 41.41%

Hello everyone, my working laptop is a T 400 running on Win XP. I would like to run a Windows 7 installation on a physical hard drive which won't be possible with my employer in the near future.My idea is now to have a second HD in the Serial Hard Drive Bay Adapter III (let's say theThinkPad 320GB 7200 rpm Serial ATA Hard Drive) on which I would install Win 7. I would then configure the bay adapter to be the primary HD to boot from. I would reconfigure the system to use the internal HD everytime I need Win XP together with my other company stuff.I don't want to install Win 7 just in another partition as I don't want to risk anything happening to the XP machine ;-) Is the above described scenario valid or do I have to take anything else into consideration? Thanks in advance!Sascha













Solved!

Go to Solution.

Answer:ThinkPad Serial Hard Drive Bay Adapter III as primary hard drive?

yes you can boot from the ultrabay hdd adapater





----------------------------T400s - 2815RW1 + Win7 Ultimate Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

9 more replies
Relevance 41.41%

I just installed a brand new Western Digital Hard Drive 160 gig. I partitioned it with FDISK, then formated, then did a clean install of windows XP. Everything was fine until after i finished the installation, and i tried to connect my old maxtor 20 gig so i could transfer some files over, and the computer stopped reading both hard drives. When i start it up, the computer can't boot from either drive. I've tried disconnecting each of the drives and only booting with one connected, with no luck. I also tried changing the gray strip, I can't remember what its official name is, but that didnt help either. When I go into BIOS and let it auto detect my drives, It wont recognize either of the drives.
 

Answer:New hard drive installed sucessfully, now my computer cant find any hard drive

11 more replies
Relevance 41.41%

Hey Everyone,

I just got a Maxtor 120GB Hard drive, and I currently have a 30GB Maxtor in my computer at the moment. I know a lot about computers, but hard drive images are one of the few things I have little experience with.

I would like to keep my operating system, XP Home, and all of its programs, files, settings, etc all together. Basically, the currect exact state it is right now as if I'm on my 30GB. I've seen my school use images to put the same image on like 20 computers.

Trust me, I'v had to re-load program after program on my dads computer and I'm already sick of doing it, so I want to avoid that lol.

I'm pretty sure there is a way do to this, and if so, can you tell me how, or give me a link to something I can read so I can pull this off. Don't want to put a fresh install of XP and reload everything and re install programs and all that stuff.

Thanks!
David Waters

Answer:Move 30GB Hard Drive Data To New 120GB Hard Drive

Can I do this without CD's, because 15GB of data wont fit on a Cd...I wonder if there is a way I can like just move it over to the other drive or something. pls help.

Thanks!
David

9 more replies
Relevance 41.41%

Hello guyz,
pliz help me with the steps involved in upgrading or replacing an MFM hard drive with IDE-class hard drive
 

Answer:STEPS TO UPGRADE/REPLACE an MFM hard drive with an IDE-class hard drive

Hi kfkaggwa, and welcome to TSG.

Any chance the motherboard has and IDE controller built in? If not, what kind of expansion card options does it have?
 

1 more replies
Relevance 41.41%

hi .
i have a Compaq nx 7400 .
i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .

im stuck and i dont know what else to try . anyone had this problem before .?

Thanks for any help .
very strange .
Timo
 

Answer:Solved: new hard drive xp , new install, doesnt find hard drive

7 more replies
Relevance 41.41%

Hi guys, my Lenovo G460 is damaged and no longer launches Windows 7 (64 bit). I recovered all the data, but need to find a recovery DVD if I want to fix the issue and start using the laptop again. Does anyone know where I can find a recovery DVD for this model? Thanks you

Answer:Lenovo G460 - Hard Drive Issue (Hard Drive Recovery DVD)

 
Are you sure it's the OS and not the hard drive?  You might want to run a linux live cd and run a hard drive diagnostic tool on the hard drive.
 
If the hard drive checks out ok, you can make a call to service and get a set of restore discs.
 
Dave

1 more replies
Relevance 41.41%

envy m7-j010dx hard drive died. i installed new hard drive and it suddenly went into some kind of failure & windows 10 keeps trying to boot then goes into automatic repair and fails and the cycle starts over.

More replies
Relevance 41.41%

envy m7-j010dx hard drive died. i installed new hard drive and it suddenly went into some kind of failure & windows 10 keeps trying to boot then goes into automatic repair and fails and the cycle starts over.

More replies
Relevance 41.41%

I am using a Gateway E4000, with a WD IDE harddrive partitioned into 2 partitions, OEM XP Pro Sp3, 1.5 gig memory, 2.5 ghz CPU.  I want to put this existing harddrive into a Dell Dimension 8400. It has a SATA Harddrive, OEM (?) XP Media Sp3. 4 gig memory, 3 ghz CPU.  I have no drivers BUT I do have the Dell Bios on a CD.My questions are:1. Since I am moving to the Dell will there still be a BIOS that I can set the IDE drive as the boot drive?  If not how can I use the BIOS that I have on the CD?2. I have no drivers, so will XP boot using generic drivers until I can download from Dell?3. Since my IDE Drive has an OEM version of XP (and a different flavor of XP) will it need to be reactivated, and infact will MS activate XP anymore?4. If MS no longer activates can I download software that will retrieve my old act # and use that?5. What other problems am I looking at and any solutions for those problems?

Answer:How to swap a IDE hard drive from a Gateway to a Dell the has a SATA hard drive

You cannot legally use an OEM installation of Windows on a different machine; the license is tied to the hardware. Also if you take a hard drive with Windows installed on it, out of one PC and put it into another PC, and set it to be the boot drive, it most likely won't work properly. If it works at all. You will need to install a properly licensed version of Windows of your choice on the Dell, if there isn't one already.

12 more replies
Relevance 41.41%

In summary:  

At the boot screen,
Port 0 (Drive D) is one Size, but then when windows opens fully and it is a
                    DIFFERENT SIZE
Boot screen is entirely different to the Disk Management Screen (And Windows Explorer screen)
___________________________________________________________________________________


In detail :


'Disk Management picture' - text version :
        Disk 0 - Drive (D)     223.57 GB    (same size as Port 4 - my
1st Priority Boot device - SSD in boot screen )
        Disk 0 -
        Disk 1 -    3 partitions    -->    Acer C   84GB free



'Boot Screen picture' - text version :

RAID Volumes
ID     Name             Level                          
Strip      Size             Status                    Bootable
0       Volume 0  &n... Read more

More replies
Relevance 41.41%

Hello, I just got a new Dell Dimension E521 with Vista as the operating system. Vista Stinks! For most programs, including video and audio from XP Service Pack 2 Vista doesn't recognize drivers that were fine with XP Service Pack 2.
Even Sonic and Roxio, which are installed on the damn thing give these same problems.

My internet connection is also no better at all and was outright disabled with a message "something has caused Microsoft Internet to stop working" after I tried
to install basic version of Zone Alarm.
Then on reboot it says "unauthorized change made to your license, you must verify your software online". This message come up before the desktop appears and this screen is frozen whether you choose the "verify" or "cancel" option.

Couldn't shut down by any means either, including Control Alt Delete, it wouldn't bring up that window. Had to literally pull the plug and reboot into Safe Mode where I uninstalled Zone Alarm and a couple of other functions that worked perfectly in XP2.

Then I was able to re-boot normally, the message did not come up again.

I hate Vista. Not interested in any "fixes", not worth the trouble. The only fix for Vista is a sledgehammer to the drive!

My hope is this: can I get the hard drive removed and replace it with a clean hard drive that has XP sp2 on it, or am I stuck with this P.O.S. Operating System?

The computer in question is a brand new Dell Dimension E521, 2.0 GH... Read more

Answer:Solved: Can Dell hard drive with Vista be replaced with Hard Drive XP?

8 more replies
Relevance 41.41%

In windows 7 my external hard drive does not show as a back up location.  When I go to system image, the box for what items I want to back up also has the ext drive checked. I do not want to back up the external hard drive but it will not uncheck.,
(faded lettering) I believe this is why I cannot back up my computer to it.  How do I get the back up from including the external hard drive? <input id="39f7f89d-082d-4e34-8bd3-a03da4f8d21c_attachments" type="hidden" value=""
/>                



|







                       





           




                           
                       
                   









0                             &nb... Read more

More replies
Relevance 41.41%

I am having a serious problem with my pc.Windows disk is showing me these following errorsBoot sector of the hard drive disk is damagedBad sectors on hard drive or damaged file allocation tableRead time of hard drive clusters less the 500 msHard drive doesnt respond to system commands40% of hdd space is unreadableWhat does this mean and can I fix itI cannot access my documents folder or other programs Any Help would be greatI tried the defrag thing but it didnt workEdit: Moved topic from XP to the more appropriate forum, at the recommendation of forum staff. ~ Animal

Answer:Critical Error Hard Drive not found. Missing hard Drive

When you say "Windows disk". Can you give a little better description of just what\where the warning message is coming from?

You "tried the defrag thing but it did`t work".

Where did you go to access the defrag? What does "it did`t work" mean?

The reason I am asking these questions is not to give you a hard time. There is a virus going around that is very similar in it`s behavior.

I am just trying to find out exactly what it is we are dealing with.

11 more replies
Relevance 41.41%

Hi, recently my lenovo T61's video card fizzled out right after the warranty expired. I have information on the laptop's hard drive that i need to get off of it. I have a hard drive enclosure for my old hp laptop's hard drive but the two drive have different connectors. I was hoping someone could point me in the right direction to find a lenovo T61 hard drive compatible external hard drive enclosure. The hard drive is a 100 GB 7200 RPM driveModel: HTS722010K9SA00HDD: 7K200-100LENOVO P/N: 42T1056HITACHI P/N: 0A53257MLC: DA2141

Answer:Need help finding correct external hard drive enclosure for a T61 hard drive

There is a lot to choose from. Any USB SATA external hard drive enclosure should work. Since i don't live in the US i don't know where the best place to buy such a enclosure would be in your case. If you cannot find any maybe someone else that live in the US could help you out.
 
-gan

5 more replies
Relevance 41.41%

I have a dell dimension 8200 windows xp home edition sp3. One of my hard drives has the fbi virus. I cant boot from a usb on it but the computer can have two hard drives plugged in at once. Could i plug the dirty hard drive in and scan and remove the virus from the clean one?.

Answer:Scanning dirty hard drive from clean hard drive in same computer

Hello, and Welcome
 
Detach the drive without the FBI virus. On another computer download Kaspersky Rescue Disk. Burn the iso to a CD. On a Windows 7 computer simply right click the iso and select Burn Disk Image. Connect the computer with the FBI virus via a Ethernet cable so Kaspersky can update it's definitions. Boot the disk and then open the terminal and type windowsunlocker (all lower case) shown in this guide. Then run the antivirus on the Kaspersky disk
 
http://media.kaspersky.com/downloads/consumer/kasp10.0_rescuedisk_en.pdf

6 more replies
Relevance 41.41%

hi all,
i hope someone can help me out, i am a newbie to all this so bare with me.
my hard drive failed over a month ago but i managed to do a system image with win7 to my new 2tb internal hard drive. i cannot get the image recovery to work as i says "no image can be found on hard disk". i am at a loss from there. I have tried and cried over this as its driving me mad as i have no pc.

Leroy

Answer:hard drive failed, system image not found on hard drive

just to add really that the system image is on my new hard drive (2tb internal). i use the boot dvd and i get a far as "repair my computer" click on it, sometimes i get message saying not compatable with this version of windows other times it lets me on to next bit, then says no image can be found on hard drive. if i go through the load drivers i can see my hard drive with items on it. ie windowsbackup and others. again i am at a loss with this, any help would be greatful.

Leroy

9 more replies
Relevance 41.41%

Had this laptop for about 6 years, had a few issues in the past, but nothing major like this. After, I ran a system dianostic, the result shown that the Hard drive short DST failed. Not totally sure how to do a recovery, I do have the Recovery Discs, so I searched up how to run the discs; turned on the system- press f11-  window loading files- window starting- then it just stuck on a window blue screen with nothing but the cursor. Can I even use the Recovery Discs? I want to replace the old HDD with a new SSD, but I'm not sure if I have to install a new OS or can I recover the old hard drive OS and transfer to the SSD?

Answer:Hard Drive failure (Hard Drive Short DST Check: Failed)

DST:Fail means  the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.

1 more replies
Relevance 41.41%

I did this on a Compaq Presario c500 and now i have no audio coming over my laptop. HELP!
 

Answer:Windows Vista Hard Drive replaced with XP Hard Drive. No audio.

You need to install the proper drivers for your hardware. All of the drivers you need are right here.
 

2 more replies
Relevance 41.41%

my macbook pro is currently our of commission due to a mishap with a cup of water. the person i spoke to on the phone at the apple store said to have the hard drive transferred to an external one in case they need to reformat it. is this even possible if my laptop won't turn on?

Answer:transfer data from laptop hard drive to external hard drive

Depends on the type of water damage has been done.
If your laptop has been a small puddle of water for a little bit of time, yes it will mess up your hdd's connectors and possibly damage it.
If the water spill was like a splash on the keyboard and quickly cleaned up, you have a good chance of the hdd working.
Just depends on what got damaged badly enough for something not to turn on for quite awhile.

Also get rid of that macbooks battery, I have a bad feeling it might not work with your macbook anymore.

3 more replies
Relevance 41.41%

I bought a esata-sata cable and tried to connect a esata external hard drive througn a sata 2nd hard drive caddy. The result is that my T42 can not detect the external hard drive. The caddy, cable, and the external hard drive are all functional with other setups. As I know, the signal of esata and sata are the same. It should be just passing through. I don't understand why it fails. I observed that both the leds on the caddy and above the caddy are lighting when I boots T42. However, both leds dims after that. Any suggestion?PS. I know using a pcmcia will be easier. However, several reviews confirmed that the writing speed is limited to 30 MB/s through pcmcia. The writing speed on the caddy is at least 55 MB/s when I tested it with a 2.5 in hard drive.

More replies
Relevance 41.41%

I want to use this(http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD022803) to replace the dvd drive.Then can I set up a raid0 of 3 hard drives on W700?Thanks

Answer:Can I set up a raid0 of 3 hard drives on W700 by replacing the dvd drive with a third hard drive?

that is not possible.

2 more replies
Relevance 41.41%

I have a T61p and purchased a hard drive adapter (pn: 40Y8725) and a 320 GB 5400 rpm hard drive (pn: 43N3403).  After ejecting the CD burner and inserting the adapter with new hard drive the system did say it was ready for use.  Problem is that is does NOT show up on the "My Computer" so I don't know how to access it.  I purchased the devices to back up the computer easily. How do I get it to register (if that is the correct term) on the My Computer so I can use it?  I am using MS Windows XP Professional.













Solved!

Go to Solution.

Answer:T61p Thinkpad Hard drive adapter and Hard drive set up question

do you see it in the bios???

5 more replies
Relevance 40.18%

Hi. As I'm unable to boot up my old computer and need some files off it I removed the hard drive from it and attached it to the 'slave' connection on a working computer's hard drive. The working computer boots up OK but having done this what program do I use to get files from the non working computer's hard drive?

Answer:How to copy from slave hard drive to master hard drive?

You don't need any special program.

Did you set the jumpers on the HDD to slave. If the HDD in your old computer was a master, the jumpers are probably set to master. You'll need to put the jumpers on slave if you are going to add it to an existing IDE cable as a slave. When you restart your PC enter the bios and see if the bios detects this new HDD. IF it does you should be able to enter your OS and it should be detected as a new drive letter.

Then just find your files and copy & paste to master HDD.

9 more replies
Relevance 40.18%

I had been using my Hitachi 320g external HD for 2yrs.It had not problem until yesterday I transfering some files from my Drive C to Hitachi HD when the computer hang.I unpluged the external HD and restart PC.When I pluged in the external HD again it was recognised as interrnal HD.I've problem accessing the files.The PC detected it was FAT32 since my system was NTFS and asked me to reformat my external HD.I tried connect to other PC but no different.
 

More replies
Relevance 40.18%

I just got a new comp and want to move my Galaxies and Godfather game files from one drive to the other.

I am wondering if anyone knows how get this to work, or, get it so i can run the program from a different drive than my primary drive.

thanks
 

Answer:Moving game files hard drive to hard drive

6 more replies
Relevance 40.18%

I purchased the Thinkpad Serial ATA Hard Drive Bay Adapter II P/N 43R1980 as one step to have a Raid configuration for my W500 with Windows XP.  My question is, will any serial ATA hard drive fit the adapter? Lest you think the answer is obviously yes, my former computer was a Toshiba Portege. Toshiba's hard bay adapter required a special fitting for the hard drive, presumability so one would have to buy the hard drive from Toshiba rather than a third-party vendor. Clever - a ten-cent part increased the cost of the hard drive by several hundred dollars. From the Thinkpad manual the adapter appears to have a standard fitting, but I would like conformation. Many thanks for an information. Rick

Answer:Hard Drive for the Thinkpad Serial ATA Hard Drive Bay Adapter II

I have exactly that Media Bay Adaptor II for my W700. I purchased a 2.3 inch Seagate 320 7200 RPM for this adaptor. While it fits and works, with out the special attachments that apparently come from Lenovo with the drives yo9u purchase from them, it is slightly loose both vertically and laterally. I have been looking for the p/n for this skinny adaptor shims/rails, but have been unsuccessful. So I have just taken two rubber bands one for each side to limit the vertical fit and it did the same for the lateral. The drive is pretty snug in the adaptor.One of this forum's moderators, AndyP, has been very helpful on this issue. He has used the significantly cheaper HDD from other vendors with out having the Lenovo HDD special pieces and he said he has not added anything to minimize vertical or lateral motion possibility.Jim

4 more replies
Relevance 40.18%

I earlier posted about the Aspire AST690-UP925A having 250GB hard drive. I since then contacted Aspire chat support. Apparently, not being tech savy we didn't realize 250 gb hard drive only 112 c drive is able to be used, the d data drive holds the programs to run the computer.

I didn't mean can I use the external hard drive internally. I meant, if I hook it up externally would it work in place of the internal hard drive that is nearly full except for around 10 GB?

So, unfortunately the computer isn't as big as you believe. But...I wanted to know if I purchase (I was looking at western digital elements 2TB external hard drive). Can we use it for this computer. It will not run itunes or anything like that, but we can obviously go online.

My brother wants to buy a new computer, but I know that is probably not the way to go. Should we get an internal hard drive installed and other memory or something or can we use the external hard drive?

I would appreciate any informed help on this since we do not no technical info on computers. Can't really afford to buy another computer right now.

Thanks in advance
 

Answer:Can external hard drive be used for full internal hard drive?

If you want to take out the drive from external hard drive case and install it in your desktop/laptop, then usually you can. Usually external hard drives are just ordinary hard drives accompanied by some extra controller to make it able to "talk" via general ports (e.g. USB). However I am not familiar with digital elements 2TB , so I can not confirm it. But I do have WD external drive, which I had positively confirm that its real drive is just ordinary hard drive.

Note that if you decide to do this, I suggest to find experience people to work on extracting the drive. If you do it yourself you will risk to damage it, and you don't want that since usually opening the closure means voiding the warranty.
 

2 more replies