Computer Support Forum

Computer Putting Itself In Sleep Mode

Question: Computer Putting Itself In Sleep Mode

For the past week my computer will sometimes put itself in sleep mode while I am using it. It doesn't matter whether I'm playing games, word processing or on the internet.

Relevance 100%
Preferred Solution: Computer Putting Itself In Sleep Mode

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Computer Putting Itself In Sleep Mode

Could be a hardware problem. How old is it? Are all the connections okay?

Is it working off a battery? Is it set to shut down when the battery is low?

2 more replies
Relevance 84.87%

Just bought Lenovo notebook with Windows 10 Home.

On my old VISTA laptop, when I put my computer in sleep mode and then woke it up, I could always view my connected MP3 player and its files.

When I do the same with my new notebook, I have to unplug and re-plug the usb connector in order to view the mp3 files.

I tried fixing by going into device manager, power management for the USB hubs, and unchecking the "allow this computer to turn off..." setting.

I alsodisabled this:
I appreciate help, thanks

Answer:Putting computer in sleep mode stops viewing my connected mp3 player

If you disable USB Selective Suspending and uncheck 'Allow the computer to turn off this device to save power', your MP3 shouldn't have any problems. Perhaps double check witch device you unchecked.

7 more replies
Relevance 75.44%

I recently purchased a Sony Bravia XBR55X900E tv and I connect my pc to it via HDMI.  Here's is my setup:

Dell XPS 8700 connects to HDMI 2 on Sony TV.
My TV receiver connects to HDMI 1 on Sony TV.
My Sony AVR connects to HDMI 3 on Sony TV, strictly for audio purposes (ARC).
Logitech Harmony one universal remote.

My issue is this:  Whenever I switch between activites (example PC to watching TV), after the TV switches to HDMI 1 from HDMI 2, this puts my Dell into sleep / standby mode.  If I press the power button, it lights up like normal.  If I go back to the PC activity, again once the TV switches from HDMI 1 to HDMI 2, the computer again goes into this "sleep" mode and I again have to press the power button to take it out of it.
All of my pc settings are set to NEVER with respect to monitor or PC going to sleep / standby mode.  Prior to this TV I had my pc connected to an older plasma TV and this never happened.
I contacted Sony to see if it something with their Bravia sync but the person said that everything looked good from the TV's end.
I'm hoping that someone has come across this and can steer me in the right direction as it is really frustrating and I don't know what else to try.
Kev

More replies
Relevance 74.62%

I got my T61p since January and I'm pretty tired of this issue. I've read on the net that it is an issue with some laptop that has a defective motherboard when using two stick of memory (which is my case). Is there any mean to get this fix? Everytime I start to game for a little while, I have to use a lapcool or else it shut itself off. The heavier the game, the faster it happen.  So please.... 

Answer:T61p putting itself in sleep mode while gaming

check your GPU and CPU temp, with HWmonitorPro what is your temp???

5 more replies
Relevance 74.62%

I just got a brand new laptop with Windows Hello. It's very useful for logging in, but my laptop now goes to sleep every time I leave my desk. The red light next to the infrared camera blinks often when I'm using my laptop (which is also pretty annoying), and then if I get up, even for a few minutes (to grab a snack, notebook, etc.) my laptop goes to sleep. I'm pretty computer illiterate, but I suspect that the camera is still looking for me while I'm using my computer and then decides my laptop needs to sleep when it doesn't see my face anymore. Is there any way to change this? I like not having to use a password, but the red light and going to sleep is annoying, especially since I tend to get up from my desk a lot just to stretch. It also seems like having the camera on all the time would drain the battery pretty quickly. Am I way off base here?

More replies
Relevance 73.8%

Please help,

I have a HP NC6400 laptop at work,

Everytime you put it into sleep mode it reboots

Ive tried checking the power options as so may sites refer to them but i have no hibernate option

network cable unplugged same thing just reboots after screen going blank and showing some HDD activity

Please help

Answer:Vista reboots when putting Laptopo into sleep mode

help

1 more replies
Relevance 72.98%

Hi, I have T440s with Windows 10 (64-bit) installed, after latest update from MS and Lenovo (BIOS 2.35) ntb beeps while putting in sleep mode (and a blank screen)  Four cycles of four short beeps and a blank screen: System board (Security chip)  Does anybody know what might be the problem and how to solve it?  Thanks.  Since I have installed Windows 10, there are repeatedly problems...  ZK













Solved!

Go to Solution.

Answer:T440s - beeps while putting in sleep mode (and a blank screen)

I got same symtom.. My solution :1) Go Control Panel -> Power Options ..2) You may see the "Lenovo Power Optimized" selected.3) I changed it to "Balance (recommended)"Everything goes back to NORMAL. Hope this helps,Lee

9 more replies
Relevance 69.7%

 I know many ppl dont like putting their pc's to sleep, but i kinda prefer it. I had this problem before with another PC and it eventually just went away. But, problem is that my mom's PC, (Dell Vostro 200, Vista 32bit), wont go to sleep when i hit the sleep feature in the startup menu. The monitor turns off, but that's it. I think the problem may be the wireless router that is hooked up to the PC. My PC would never sleep when I first hooked up my wireless router to it. But for some reason, it just started working like it should. I have it set to sleep after an hour or so, and it has never gone to sleep yet. (since i hooked up the router). I didnt know whether to post this here or hardware, but I think its a Windows issue so...Thanks for the help.

Answer:Putting computer to sleep

Nevermind. I just had to delve a little deeper into the advanced settings to get it to work. Had to "allow computer to sleep while sharing media". Dont remember doing that on my PC.

1 more replies
Relevance 69.7%

I have a HP Pavillion and want to know how to set it to go to sleep?

Answer:putting computer to sleep

HP Pavilion = laptop, correct?

Open Control Panel, Power Options icon

On Laptops there should be 2 settings; one for AC (adapter being used), the other for Battery.

Just a suggestion; for AC settings I recommend NOT to turn drives off nor Hibernate.

Also, I am not familiar with HP laptops, but some (like Toshiba) have their own laptop setup in Control Panel that includes Power Options.

1 more replies
Relevance 68.88%

I recently accidentally put my computer to sleep, when trying to shut it off and since then it just refuses to boot. The motherboard usually beeps when booting up but thats stopped now, the only thing that happens is the fans all run for a couple of minutes before the computer powers down on its own, theres no power going to the usb ports either as the laser on the mouse doesnt light up, neither do the lights on the keyboard, I dont get any video output at all.
#
The computer is custom built, and specs are:
Motherboard - Asus P5-QE
CPU - Intel Core 2 Quad Q9550 @ 2.83GHz
Ram: 2x 2GB Kingston DDR2
GPU: ATI Radeon HD 6450 1GB
PSU: Corsair TX650w

I have tried:
using my old GPU
removing everything except the CPU and heatsink+fan
same as above but with both GPU's seperately and 1 stick of ram
rewiring the whole pc
a 700w PSU
removing 2 HDDs and booting only with the OS loaded HDD

after the above the pc still wont boot, please help me

Answer:Computer not booting after putting to sleep

UPDATE: after clearing CMOS the computer will now boot, but there are green squares where the asus logo would be when booting, it gets to a point where asks to enter bios to configure it, but then just cuts out after a few seconds when configuring bios. then it will cut off before it even reaches that point, after leaving the computer off for a few mins it will do the same thing up to configuring bios then cut off then starts and cut offs after about 3 secs until left off for a while

2 more replies
Relevance 68.88%

Now that I have WIN10 it's not possible for me to easily put the computer to sleep. The Power button shows the three options but a single click or a double click on SLEEP yields a dark screen but then an active screen reappears in about 6 seconds.

Anyone have a clue? I'd be grateful for comments.

PS --When the screen goes blank after non-use is that true SLEEP or just a monitor "rest" ?

Answer:Difficulty putting computer to sleep

dlcooper,

Below is a Great Informative tutorial from here on the TenForums detailing sleep mode. Click the link.

How to Put Your Computer to Sleep in Windows 10

6 more replies
Relevance 68.88%

Hi all,
I have been trying to fix my computer for about a week now. The problem has been happening for about 2 weeks. What happens is when i put my computer to sleep or if my computer goes to sleep by it self, it gets a blue screen and shuts down. I have updated the drivers and ran the SCANNOW command to try and fix the files. WHen i reboot my computer after i get the blue screen it freezes for about 1 min on a white screen before starting windows. This is the error its sends me. Im running windows 7 x64.any help would be great and if you need anymore info let me know and i will try and provide it.
Thanks

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF880058F9275
BCP3: FFFFF8800A3E1008
BCP4: FFFFF8800A3E0860
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\102311-38953-01.dmp
C:\Users\Josh\AppData\Local\Temp\WER-162303-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:BSOD when putting computer to sleep

Download memtestx86 and run it for 5 passes to see if it is the memory. http://www.memtest.org/

6 more replies
Relevance 68.88%

I"m running Windows 7 Ultimate 64 bit version. I noticed after I installed SP1 whenever I put the computer to sleep, the disk churns away for about 5-10 mins and eventually it BSOD - driver power state failure - 0x0000009f


I'e read through various posts and tried a bunch of things but nothing works. All the MS updates have been applied. Im running the latest ATI GPU drivers and all the software on my machine is up to date according to Secunia PSI.
Any ideas? I've attached the mini dump.

Answer:BSOD When putting computer to sleep

Fixed it - ran windbg and it pointed to the Realtek NIC driver. A new version was released last month which I installed and problem resolved

1 more replies
Relevance 68.88%

The motherboard I'm using is a 'Gigabyte X48-DS4' with a 'Q9450' Processor with 'Windows 7 Professional' installed from fresh, not updated.

The operating system is completely updated automatically with all required updates and patches from Microsoft.

The problem I'm having is very weird, I've never seen it before.

If I put the computer to 'Sleep', it will go to 'Sleep' but when I come back and press the power button on the computer, it will continuously cycle, the computer powers on, and then powers off, and keeps doing that until I either hold the power button down (or switch it off at the power supply) and then power it back on. However, if I do this, its like a normal boot, no longer resuming from its Sleep.

Please help! Thanks!

Answer:Computer will not start after putting it to Sleep..

What happens if you turn off hybrid sleep mode it's in dutch but Uitschakelen means 'disable'

5 more replies
Relevance 68.06%

Hi,
My computer is running Windows 7 professional. It is a fresh install. I have a blu ray drive installed (LG BH12ls38) that works fine. However, when I put my computer to sleep and wake it back up, the drive is gone. When I go to device manager and try to scan for hardware changes it still doesn't recognize it. The only way to solve the problem is to shut down the computer. Restarting the computer doesn't help. If I restart, the computer stays on the motherboards screen for a longer period of time then it normally does (about 30 seconds). Also, it seems that this drive is affecting the computer when I shut it down. After having this problem of not being able to find the drive it seems my computer takes longer to shut down. I have installed all necessary updates for Windows and the driver is provided by Microsoft driver version - 6.1.7601.17514 and date is 6/21/2006. I called LG and they have not been able to find a solution. It seems they do not provide/have a driver and rely on microsoft's drivers. I also updated my BIOS to the newest version. I went to my local store and tried another LG drive which was older and not blu ray and it worked fine so it's not a motherboard or power issue. My computer is running in IDE mode. The reason I state that is because I saw some posts about people switching from IDE to AHCI mode to help similar problems to this. However, I talked to the technician at my local microcenter and he said this wouldn't be the issue. Sound... Read more

Answer:Blu Ray Drive disappears after putting computer to sleep

1) Does it recognize it when you insert a disc?

2) Have you tried replacing the drive with a replacement blu-ray drive?

3) One option, clearly, is not to use "sleep". While hibernation and sleep work perfectly for many, there are LOTS of folks who have various problems with one or the other (or both). Believe it or not, these functions were never 100% perfected by Microsoft (hard to do when you are dealing with all of the possible various hw & sw configurations). You can simply set the hd & display to power down after a defined period of inactivity. It should work just fine for you.

6 more replies
Relevance 68.06%

I have an HP pavilion g6 notebook laptop computer. I have recently upgraded from Windows 8.1 to Windows 10. I had occasion to put my computer to sleep! I had been working on my college courses for a few hours, when I needed to take a break. I put my system to sleep, but when I returned to complete my assignments my computer would not turn on! It went to an off black screen, and locked up! When at sleep the power indicater blinked, which indicates that it was in sleep mode. When I tried to awaken my Pavillion it locked up, and the only way to regain control was to manually force it to shut down (i.e. hooded power button down.) thinking this may be due to system clutter I cleaned both user disc & system files using the Windows disk cleaning function, found through the control panel, looked for both HP updates, and Windows updates. Later I again tried to awaken my machine after putting it to sleep, and had a repeat in the inability to awaken it! A third and the last time I tried to awaken my PC from sleep I noticed that for some reason, and somehow the indicator light was solid, the screen black, and I heard my computers fan running! Can anyone give me advice as to solve this puzzle?

Answer:Why won't my computer awaken after putting it to sleep in Windows 10?

You can maybe give this a lookHP sleep-mode fix

3 more replies
Relevance 68.06%

I have Windows 7 Ultimate on my home built computer. Whenever I put my computer to sleep and wake it up with the power key on my keyboard it shuts down and I have to turn off the power supply and wait 5 seconds before I turn it back on. This is irritating. Why does my computer completely shut down and how do I fix this problem? Thanks for any and all help!
 

Answer:Solved: waking computer after putting to sleep.

Usually when putting a computer into sleep mode pressing any key on the keyboard will wake the computer. I would recommend pressing the space bar instead of the power button in order to avoid conflicts.
 

2 more replies
Relevance 68.06%

Is there a way to do this without putting your computer to sleep?

I'd like to be able to lock my screen and still have my files download while it's locked for example.

I've tried google and all, but all the results are for mac, and nothing is showing for PC...

Thanks guys!

Answer:lock screen without putting computer to sleep

Hi, if you mean to just lock your computer, I am asumming vista, it is pretty easy.
You will need to have the settings correct so it won't go to sleep automatically.

But if you want o have it so you need the accout password to use the computer again, just go to the Start Menu, and on the bottom right will be 2 buttons and an arrow. One button is to shut the computer down or something like that, the other is to lock the computer. You can als click the arrow and select Lock that way.

I'm not sure if the Lock optio is avaliable if you don't have a password set, so you will need to have that set.

If this is not what you were looking for, please tell me and I will try to correct it.

5 more replies
Relevance 68.06%

My HP DV7-7135US has begun recently begun crashing while going to sleep. I've had the laptop for several years and it randomly crashed when going to sleep or hibernate. It always hangs after turning off the sound (light goes out) but before turning off the wireless/bluetooth hardware and fingerprint reader. Sent the laptop to HP, their solution was to wipe and reload it. Still had issues. Reloaded my backup image and reinstall/repaired the wireless/bluetooth software, finger print software and drivers. It finally worked ok with occasional crashes for the past year. Last week while traveling it began to crash and get the BSOD. I have tried repeating my previous repairs with no luck. I don't know what is causing the system to crash now.

I greatly appreciate any help provided. Log files attached.

Answer:BSOD when putting the computer to sleep or hibernate

Install the latest updates from Windows Update.

9 more replies
Relevance 68.06%

Hi everyone,

I left my Sony Vaio VGN-NS190D on when I left a few Fridays ago, and when I returned on Monday, it had gone to sleep by itself like it normally does. However, I've recently discovered that when it goes to sleep without me pressing the "sleep" button, when it restarts again the blue screen pops up. SO FAR, it hasn't been too serious because I am able to reboot my computer from the blue screen and the system simply restarts and everything looks normal. However, this is very troubling to be (blue screens scare the bleep out of me) so I'd like to know if anyone can recommend any actions I can take to fix this issue. It's never happened before, and if I shut down my computer or press the sleep button, the screen doesn't pop up. I also get the blue screen when I just close my computer top without hitting shut down first. I've already gotten a blue screen many many times, but somehow I feel like one of these days it'll just be a fatal error and I'll have to scrap this laptop, which I don't want to do.

I also can't tell if this is a problem with my Vaio or not, but it's fairly new so I don't really think so. I'm hoping for suggestions to fix the issue so I can stop constantly worrying that someday I'll get a complete crash and won't be able to turn on my laptop at all anymore. Also an explanation of what's happening would also be great.

Thanks in advance!

More replies
Relevance 67.24%

Using windows 7 ultimate 64 bit

What is causing this?

Answer:After putting computer to sleep, it immediately turns on straight after

What is the model# of your PC? Is it an OEM build or custom build? Need the specs of your PC before we can deduce anything.

19 more replies
Relevance 67.24%

Just recently, I am unable to set a time for my computer to go to sleep under power options. It will not go to sleep after I set it to 30 minutes. It stay on constantly. What's the fix?

Answer:Problem putting computer to sleep under power options

Originally Posted by quetip


Just recently, I am unable to set a time for my computer to go to sleep under power options. It will not go to sleep after I set it to 30 minutes. It stay on constantly. What's the fix?



This is our tutorial by Brink, there is not better resource, anywhere. Read it and hopefully it will resolve your problem.


Power Options and Sleep Mode Problems

1 more replies
Relevance 67.24%

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 810 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 7934 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: 465 GB (374 GB Free);
Motherboard: FOXCONN, ALOE
Antivirus: Trend Micro Maximum Security, Updated: Yes, On-Demand Scanner: Enabled

For the last 3 mornings, after I have already been online & then put the computer to sleep, when I come back on the monitor stays black...nothing or if it did come on for it's status it said no signal. I turn computer clear off & reset? the modem & have tried turning the surge protector off/on...eventually the monitor comes back on. Then the rest of the day I don't have any problems.

A few weeks (maybe more) ago off and on I'd get some of the IE has stopped working & also have had a couple popup? with beeps saying something was trying to get your info & call a number. I didn't click on anything...just shut the computer down. That was over 2 wks. ago.
 

More replies
Relevance 67.24%

Win7 ran pretty flawlessly until about two weeks ago. Now every time I come down to access my computer from sleep, I notice that it's turned off due to a BSOD. Also, I just tried to run MokaFive this morning and got a BSOD while it was starting up. Here are the appropriate files. Any help would be greatly appreciated.

Thanks!

Answer:BSOD While Starting MokaFive or Putting Computer to Sleep

Thanks for highlighting your issue, we will take a look and get back to you asap.

Moka5 "Secure the business. Free the users."

4 more replies
Relevance 67.24%

I bought an ASUS G73JH gaming laptop 2 months ago and just started getting this random, inexplicable error. It's happened twice this last week and I have lost a considerable amount of unsaved work because of it.

What happened the first time was I put my laptop to sleep in order to do something else and when I came back it had shut down by itself. After booting it back up the first thing that was displayed was the window in the images above. I don't know if my computer actually had a BSOD before it shut down because I was not there to see what happened.

Second time this happened, I just left my computer at idle without putting it to sleep and left the room. My laptop is configured to go to screensaver after 10 minutes and sleep after 15. When I came back this time, my power button was not blinking, meaning the computer was not asleep, but the monitor had shut off and could not be turned back on with the monitor on/off toggle. I had to manually restart the computer by holding the power button, and when it booted back up again the same window appeared. Yet again, I don't know if my computer actually had a BSOD because this time the monitor was turned off.

Any ideas?

P.S. My system specs are in the sig below and I've attached the requisite .zip file. No components are overclocked or otherwise modified at the hardware or software level. This is the OEM version of Windows 7 that was pre-installed on my system but I did a reformat right after I got the computer.

Answer:Random BSODs after putting computer to sleep or idling

Here's what my Action Center error reporting had to say about what happened:

First, "Windows stopped working"


Then, "Shut down unexpectedly"

3 more replies
Relevance 67.24%

Happens every once in a while while trying to put my computer to sleep. When I try and wake it up, it stays on a black screen then restarts. Any help is appreciated, thanks.

Answer:BSOD putting computer to sleep, error 0x0000007a

  
Quote: Originally Posted by Mordoff


Happens every once in a while while trying to put my computer to sleep. When I try and wake it up, it stays on a black screen then restarts. Any help is appreciated, thanks.


Hi Mordoff.

Click on the button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

3 more replies
Relevance 67.24%

For a few weeks now, I have been getting BSOD when i put my computer to sleep. It seems that if i wake up my computer within a few minutes after i put it to sleep, it doesn't crash though. I have attached the file so the community can assist me with this problem. Thank you.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8007121A10
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA800EEF9C10
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\110812-10483-01.dmp
C:\Users\Jimmy Howerton\AppData\Local\Temp\WER-32619-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:BSOD after putting computer to sleep, locale id 1033

The .nfo file you uploaded is corrupted.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

6 more replies
Relevance 66.42%

Recently I have been having problems with shutting down and putting my computer to sleep. I do not know the cause nor have I had this problem before. I sadly do not have the stop code parameter information but I do have the files made by the dm collector. All I know about this code is that it may be a memory leak, which I do not know how to fix.

Answer:BSOD Shutting Down and Putting Computer to sleep, Error 0x0000009f

Hello and Welcome to SevenForums

This one can be a little tricky to solve because i've had it and it's annoying and took me a while to fix, anyways lets get to troubleshooting.

The dumpfile was unhelpful.
Run Driver Verifier for 24 hours. Driver Verifier - Enable and Disable
Your system may slow down a little but that's because you have Driver Verifier on. If you crash when you logon in your computer then go into Safe Mode and disable Driver Verifier. Safe Mode

1 more replies
Relevance 66.01%

After I click on Start and then the arrow, the field with "sleep" disappears as I move the mouse toward it. Is there a way to prevent this from occurring or is there a short cut for putting windows 7 into standby?

More replies
Relevance 63.14%

Hi, I'm having problems on a system with a gigabyte MA78GM-US2H and a amd 9850 quad. The computer works fine but after I install symantec I can no longer get the computer to go to sleep, It just reboots and starts up again. When I remove it, the computer can go to sleep again. I have updated all of the drivers and the mobo bios but the problem is still here. Any ideas on what to do next? or maybe is there a free virus program out there I could use instead? I would rather not have to buy something different if I can avoid it. Thanks
 

Answer:Problems with Symantec and sleep mode, computer reboots instead of going to sleep

What program do you mean by "Symantec?" Symantec makes a ton of different antivirus softwares, among other things. Most of them are a pain in the ass, and your computer is better off without them. I think a lot of the guys on this forum recommend NOD32. I typically recommend Trend Micro, but to be honest I don't use any AV on my own machine. Be smart with your surfing, don't open attachments, and run a firewall. Makes it pretty damn hard to get a virus!
 

5 more replies
Relevance 61.91%

Hello Seveners!

I have been having trouble with a BSOD for a while now. It is getting to that extent that I bare it any longer! I need help!

Firstly, these BSOD's have been happening randomly, but normally the case is while it is in sleep, or when I put it to sleep, the screen will go black, but the laptop will refuse to actually sleep. It remains in this state of useless on-ness until either I pull the plug or it decides to BSOD.

I have a program called Soluto, which sends the details of the BSOD to my email. It said the error code was 1000009F and the likely cause was: nt driver.

I ran verifier.exe and restarted. Upon restarting I was constantly greeted by a BSOD informing me that there was a problem with HIDCLASS.SYS. Upon restarting with last known good configuration, I am here, looking for help! There are 6 results for HIDCLASS.SYS on my laptop, all seeming to point to AMD.

I have attached my Minidumps from today (two BSODes), my system NFO and a picture taken of the BSOD when booting after running verifier.exe. They are zipped as one, due to the fact that uploading of NFO files doesn't seem to be supported.

This is getting increasingly infuriating as I am constantly losing work!

System specs can be found on my profile and in the NFO.

I appreciate any help!

Many thanks,

Ben

Answer:Numerous BSOD's. Normally caused while in sleep / putting to sleep.

What USB devices have you got installed?

I believe we are looking at a USB device causing a bugcheck.
Do you have a gaming mouse or any mouse drivers installed?

HIDCLASS.SYS appears to be mainly caused by mouse drivers.

Because a lot of driver power state failures are caused by graphics drivers I recommend updating yours as it is very outdated.
Here's some instructions if you are unsure how to update it.

How-To Install AMD Catalyst? Drivers For A Windows? Based System


Code:
fffff880`048f4000 fffff880`05302000 atikmdag (deferred)
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Thu Sep 15 19:07:36 2011 (4E723EE8)
CheckSum: 009C92B0
ImageSize: 00A0E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Post back the results.

4 more replies
Relevance 61.5%

I like to put my computer on sleep so I can just come back to where I left it, but the past few days when I put it on sleep the screen would just go black like it was asleep, but the computer was still on and running like I didn't put it in sleep. Then when I move the mouse to come out of sleep it says "locking computer" and goes to my password screen (which is what it should do before going to sleep). I don't think its in the power settings because I've checked there and played around with the settings (I'm not technically challenged so I don't think it's something that simple lol).

Also, my touchpad scroll feature does not work (and has not worked for quite some time). It comes back when I turn the computer off and on again, but I only do that a few times a week. I've tried reinstalling the touchpad firmware so that isn't the problem.

I have a Toshiba Satellite A215.

Answer:Computer Doesn't Sleep When In Sleep Mode

Back when I had that problem with my Toshibia Satellite, I had to turn off the Awake on LAN in the bios, because when the network is present it will want to wake up.. Just something to try, im sure other people will have other ideas, and hope one of them will do the trick :)

7 more replies
Relevance 57.81%

HiI am trying to get support to fix my laptop, a Lenovo T430S. When I put my laptop to sleep, it crashes and doesn't recover from the sleep mode. I have updated most of the drivers involved with network, power management, and USB. I have copy and pasted the BSOD crash report - which shows TCPIP.SYS a isnd NTOSKRNL.EXE involved in a Drive_Power_State_Failure. I feel that some of the drivers are corrupted. Is there a way to restore the drivers to original settings without deleting files such as documents and programs? I do not have a restore point prior to this malfunction. So I have backup my computer with  windows backup software. Can I do a system restore (to original setting) and just recover my files from the backup? 101015-45287-01.dmp 10/10/2015 4:07:59 PM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`071d7a10 fffff800`00b9a3d8 fffffa80`0dcdf680 tcpip.sys tcpip.sys+186c10 x64 ntoskrnl.exe+735c0 C:\Windows\Minidump\101015-45287-01.dmp 4 15 7601 1,225,960 Thanks in advance!Sincerely,Jason

More replies
Relevance 57.81%

For the past week my computer has been acting odd. Here is what happens

1. Sometimes when i turn on the CPU, the light will either turn blue, flash blue, or wont be on at all. When this happens ( no matter what the light does ), I can hear the fans/drives, and my monitor goes on, but there is nothing on the screen. I usually fix this by turning off my power strip, and then turning it back on or hold the power button on my CPU.

2. When i reboot, my computer doesn't fully shut down. Windows Logs off, and I am left with a blank monitor, with my CPU still on ( if I just turnoff the power button and then back on it stays the same, CPU on, nothing on screen.

3. When my computer goes into sleep mode, pressing keys/moving or clicking the mouse doesn't "wake it up".

I am using Windows XP Media Center SP2

Can someone help me?
 

Answer:Computer Help Needed My Computer Won't Fully Reboot/ Leave Sleep Mode

Lets see, off the top of my head...
Does the computer ever lock up when copying large files?
When trying to turn on the computer, does it some times turn off almost as soon as you attempt to turn it on?
Do you ever hear any odd ticking sounds when booting up?
 

3 more replies
Relevance 56.99%

Well I recently installed a new motherboard, it was the same as the old one but I was convinced the old one was fried. Now I am trying to reinstall everything, only when ever I boot and try to install, it says I have a disc read error. This is understandable because the drive was previously formatted for a NAS system. So I go into the BIOS and change it to boot from the CD rom first, so I can install windows and reformat I save it, and exit. This is where the problem begins. The computer does not restart, or shut down, but goes into sleap mode, and wont come out of it. So I am forced to turn the computer off, and then the BIOS does not recognize the changes, and the process is repeated with the same ending. Could you help me understant why it would do this?
 

More replies
Relevance 56.99%

I have a Dell computer which switches itself into sleep mode. This will happen during boot, or while using a program - the computer simply goes to sleep!

I have tried as many combinations of sleep settings in CMOS as I can think of.
I have disabled power management
I have removed each stick (2) of RAM and tried in all slots both individually and together
I have disabled the power switch
I have substituted another power supply
I have installed another hard drive and installed the operating system again
Any other ideas?

Operating System - Windows XP Pro SP2

Answer:Computer Goes Into Sleep Mode

Hi,

Have you given a thought to faulty sleep key on the keyboard ?

ArshadParvez

5 more replies
Relevance 56.99%

Display adaptersMobile Intel® 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)System devicesThe computer doesn't come out of sleep mode (I have to preform a shutdown by using the power button) and shows a weird pixelated image similar to a old TV - see picture 1 When I restarted the computer, a similar image showed up - see picture 2. After the third forced shutdown my computer started up fine.12Video 1Video 2Now my computer is working fine but I am still wondering...

Answer:Computer won't come out of sleep mode

Make certain you have the latest driver for your video chip. Start here.

1 more replies
Relevance 56.99%

I can't get windows to go to sleep on its own, per settings under power management. It will sleep just fine if I put it that way manually, and it wakes out of sleep just fine. In fact, my Windows Home Server wakes it up to run backups every night. The problem is, my computer won't put itself back to sleep.

No password required after coming out of sleep.

I have very little software installed... NOD32 EVEREST ultimate 4.6, WoW, BlackBerry desktop (set not to come on unless I start it), TuneUp Utilities, and drivers for my logitech mouse and microsoft keyboard.

I've had all these, except the blackberry software, installed in the past without trouble. The blackberry is powered off and the related software is shut down when all this happens, so I'm thinking its NOT the blackberry.

Any help would be greatly appreciated.

Windows Vista Business edition, SP1
Asus P5Q-Deluxe mobo
EVGA GeForce GTX260 GPU
Creative X-Fi PCIe sound card
 

Answer:computer won't go into sleep mode on it's own

Sounds like you've got some USB or Network activity that is preventing it from going to sleep.

Any errors or messages in the event logs?
 

4 more replies
Relevance 56.99%

Please be patience with me as I am not the most tech savy.     My computer goes into sleep mode and will come out when I press keys on the keyboard.  When I look at the monitor it gives the message that the monitor does not recognize or can not find the computers hard drive.  I have checked and everything is plugged in as it has always been...nothing changed.  Does anyone have an ideas as to what to try? Thx

Answer:Can't get computer out of sleep mode

what kind of computer do you have and what windows version do you have?

8 more replies
Relevance 56.99%

How do you keep the laptop from going in sleep mode every 5 seconds? It's not really 5 seconds it just sleeps very quickly.

Answer:Computer Sleep Mode

Click Start and then Control Panel
If you're in Category view, click Performance and Maintenance anc click on Power Options
If you're in Classic view, double-click on Power Options

You should be able to customize the settings there.

4 more replies
Relevance 56.99%

I have a hp Pavilion f1503 desktop. It was working fine last night, but now I connot get it out of sleep mode. When I turn it on, it says "PC entering sleep mode 'REDGREENBLACK'" (that is written underneath it; each colored with the corrisponding numbers). Then the screen goes black. The only way to get out of it is to press the sleep mode button (the half moon) on my keyboard. Then it will come on for about 3 seconds and then go black again. I looked up the issue, but couldn't really find a solution to the problem. I tried force restart, making sure all connections were secured, unplugging eveything and plugging everything back, pressing f9 on startup for diagnostics, running it in safemode, etc. Everything ends the same- with the screen coming on for a few seconds and then going into sleep mode again. I noticed the last time it came on that the color was distorted. It looked orange-ish. Any ideas on what could be wrong? Is it my motherboard? Some people said dust in the modem. Some people said the graphics card needed replacing. I am not completely non tech savvy. I am pretty good with this stuff, but I am stumped
 

More replies
Relevance 56.99%

Dear sirs
I wonder if you can help me whenever I put my computer into sleep mode it shuts down and thenafter a couple of seconds it starts up again. I have tried various settings in the power options of the Control Panel but nothing seems to workk.
Could you please advise me in any way.
Yours Truly
P H Millward (goldenorbs)

Answer:Computer won't go into sleep mode

I spilt coffee on my laptop keyboard recently.
Some keys don't work and it doesn't stay in sleep.
(I really must fix it sometime)
Maybe you have a stuck key or something?
Set to sleep mode and pull keyboard cable out immediately to check.
(you'll have to reboot to get keyboard working again)
I am sure there are lots of other causes too.

6 more replies
Relevance 56.99%

My computer was running fine until a couple months ago it just went into sleep mode. So I couldn't figure it out & thought maybe I had fried it or something so I just powered everything off & left it alone for a month or 2. Then a couple weeks ago I thought I would give it another try. Plugged it in & it came right on. Well that only lasted about 2 weeks. Now it's doing the same thing again & I can't use the keyboard or mouse to change the settings. Can anyone help me please? Thanks!

More replies
Relevance 56.99%

Hi,
I have a problem, my computer won't star again After I put it to sleep last time.. I did this from my iPhone and now my computer won't come back. It starts and everything but screen, mouse and KB dosent work.. When I look inside my computer there are 4 shining lights.. 1234 phase led I think it says. Anyone knowing what the problem is? Do I have to repair it I a store?

Thx Kennedy

Answer:Computer into sleep mode

If you have a reset button on your case, press it. If not, hold down the power button for five seconds, wait a short while, and turn the computer back on.

Does your computer run again after this?

6 more replies
Relevance 56.99%

I have the settings to "never" go off if plugged into battery, but it seems to go out often.

More replies
Relevance 56.99%

HI, I have a Compaq Presario and just recently, it won't go into sleep mode unless I do it from the keyboard and even then, sometimes it wakes up before I do anything, what could be causing this and will it hurt to just let it run and turn the monitor off?
 

Answer:Computer won't go into Sleep Mode

I can't think of what might be causing the problem, but what about just shutting the computer down or hibernating it?

There shouldn't be any problems with leaving it running, but it is not recommended as it is a waste of power.
 

1 more replies
Relevance 56.99%

The computer (Vista) goes back on when I put it in sleep mode. What gives?
 

Answer:Computer goes on while in sleep mode

what do you mean it comes back on when you put it in to sleep?

sleep is a low power state that the computer goes in to and by moving your mouse or pressing buttons on your keyboard will wake it up. if you want to save power the best function to use is Hibernation,

Explanation HERE

JPLamb
 

1 more replies
Relevance 56.99%
Relevance 56.99%

Can anyone help me with the following? I recently went wireless and since then I have been unable to put my computer to sleep! It will go into hybrid sleep but I don't always want to use this option. I'm running Vista home premium and my router is a Netgear WGR614. Would I have to change any settings in the router software? I have gone into power settings on PC and as far as I can see everything is set as it should be? Any help/advice would be appreciated!

Answer:Putting PC to sleep!

you probably need to goto the optios for yuor wireless device and select the "allow vista to turn off this device to save power" option and / or unselect the "allow this device to bring the computer out of standby" option

1 more replies
Relevance 56.58%

Hi,
I've had this problem intermittently on my laptop for the past 2 years however it has been occuring more often recently.

Basically sometimes when I click the sleep button on Windows 7, the screen fades to black as usual. However the fan keeps running (sounds like when it's on full load) and the power button light stays on endlessly. I always have to force shut it down and restart it.

What can be the issue?
Thanks.

Answer:Laptop freezes between entering sleep mode to being in sleep mode

Hi joseph10444.

Such a situation may occur when some driver (mostly the PnP device drivers depending on the ACPI configuration) fail to response within a stipulated time period during the power state change.

Let us see some data. Upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
Upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.
Those files will give us a closer look to the issue.

7 more replies
Relevance 56.58%

hai.. help needed.... i am having the exact problem as op.. when i press sleep button, screen goes black (as usual).. but fan, and other keyboard lights are still on... it just freezes... i have to force shutdown to again use my laptop...

i am attaching the msinfo32.nfo, driverview.txt...

and one more thing... i dont have problem of bsod... thanks..

Answer:Laptop freezes between entering sleep mode to being in sleep mode

Original Thread

Laptop freezes between entering sleep mode to being in sleep mode

4 more replies
Relevance 56.17%

Hello, I recently started having trouble with my computer shutting down after placing it into SLEEP mode. Here is the Error information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: FFFFF8A00032EF58
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002CBA25B
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\052414-23088-01.dmp
C:\Users\Harold\AppData\Local\Temp\WER-50029-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Thank you for the help.

Answer:BSOD After Computer goes into SLEEP mode.

Hi Blue1445.

The display driver is too old, and it needs update. Update it, but not to the latest. Install version 13.9 WHQL only.
Previous AMD Catalyst? Display Drivers
Let us know the results, as it may need further troubleshooting.
________________________

Code:
fffff880`03316208 fffff880`03e7b0c6Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0x50c6
________________________________
fffff880`03e76000 fffff880`03ec7000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Wed Jun 29 07:41:21 2011 (4E0A89C9)
CheckSum: 00051127
ImageSize: 00051000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

1 more replies
Relevance 56.17%

This has been going on for a few weeks now, I finally saw it happen when I manually slept my computer

Answer:BSOD when i put computer into sleep mode

1: MotionJoy is causing issues.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff88005d8c638, 2, 8, fffff88005d8c638}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )
Uninstall MotionJoy, I've seen that causing BSODs regularly lately. See if there's a more stable previous version.

2: The next thing flagged is your Xbox Wireless USB driver. This is a known issue in Windows 7 with the 2009 dated driver.


Code:
fffff880`035f55c8 fffff880`05d95a5eUnable to load image xusb21.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xusb21.sys
*** ERROR: Module load completed but symbols could not be loaded for xusb21.sys
xusb21+0x2a5e

Code:
2: kd> lmvm xusb21
start end module name
fffff880`05d93000 fffff880`05da3d80 xusb21 T (no symbols)
Loaded symbol image file: xusb21.sys
Image path: xusb21.sys
Image name: xusb21.sys
Timest... Read more

1 more replies
Relevance 56.17%

I like Win 10! It's really great and good looking. It also performs really well and my laptop starts quite fast. Only one thing that annoys the h... out of me. The reason for this is, that sometimes my laptop just goes to sleep mode. I only have to let it be for 2 minutes and... gone! It doesn't do it all the time. I have managed to find a pattern. It only does this when it has been into hibernation or sleep mode once. After that it does it all by itself. And I know that many of you now thinks "why don't you change the settings?" Well, the thing is - I have! Everything has been set to "never go to sleep". Everything!
What to do?

More replies
Relevance 56.17%

My computer won't let the windows programs reopen/return after going into sleep mode. The lights on the computer show it is running, but no matter how much I click on the desktop screen or hit the keyboard, the computer doesn't bring back the previous screen--or any screen.

I have to unplug the computer and then do a new start. I usually don't have many programs/apps running so I don't lose much, but it is an annoying issue. I noticed today after I unplugged and did a new start that Windows had tried to do their auto download on fixes this morning. Could this have anything to do with the problem?

Is this something that can be fixed via software settings? Or do you think this is a hardware problem that is causing it to 'stick'.

Thank you in advance for any help or suggestions you can make.

Cheers, Wildbill.
 

More replies
Relevance 56.17%

I just got this HP  computer, Model # 860-180st,  no even a month old, the sleep mode was working fine when I got it, but now it won't go in to the sleep mode. I checked everything in Control Panel, power options, so I dont know what is the problem. Any idea folks?  

More replies
Relevance 56.17%

Hi,
I have formated my PackardBell PC. There is no problem about sleeping mode.
And I have recovered The PC's image to another PC. But in this computer, when The PC is sleep on, I can't open with nothing.

PCs' operation system is: Windows 10.
Model: PackardBell All in One.

More replies
Relevance 56.17%

I was working with my computer and it went in sleep mode while I was using it. now i can't get it out of sleep mode.

Answer:cannot get Acer computer out of sleep mode

http://au.answers.yahoo.com/questio...may work?Otherwise do a google search using the searcg ter/string:Acer computer stuck in sleep modeand you will get a few more ideas popping up...If you insert laptop or desktop - even better the model number - in place of the word computer in the search term... you may get more specific information via google?

2 more replies
Relevance 56.17%

On windows 8.1 updates up to date as of a couple of weeks ago.

Sometimes when it's time for the computer to shut down and sleep on the auto timer it clicks off and resets instead of sleeping.

Only started happening the past week or so.

Any ideas?

Answer:Computer restarts instead of going into sleep mode

Try Restoring to an older date, prior to this starting to happen.

1 more replies
Relevance 56.17%

I've had this computer for about 4 months now, and I haven't had many problems with it aside from an invalid Windows 7 key which I fixed. But lately my computer has been falling into the nasty habit of forcing itself into sleep mode while I am using it. It started about a month ago, and has spiralled into a major problem. My computer can enter sleep mode 5 or 6 times in a row with about 5 seconds inbetween each wake up. I use my computer for a variety of things, such as gaming, photoshopping, streaming movies, and the such, so this problem really proves frustrating when it begins to act up when I am in the middle of something. It also seems to act up in sessions. At times it won't do anything for a few hours and I will peacefully use my computer. But then it will suddenly kick in, and will enter sleep mode multiple times with only a few seconds inbetween each wake up. At the moment of writing this, my computer has entered sleep mode 12 times. I've been counting...

I don't know what could be causing this problem, as I've tried a few different fixes. I updated both my dedicated graphics card (Geforce GTX 960) as well as my integrated graphics card (Intel HD Graphics 4600) to see if they were out-dated, but both were up to date and functioning. I made sure my GTX was properly installed and secured and it is. I also purchased a new hard drive due to lack of space, and I was hopeful that maybe that was the problem, but it didn't help. I considered trying to update my BIOS, but ... Read more

Answer:Computer keeps forcing itself into sleep mode?

Have you run a recent malware scan?

9 more replies
Relevance 56.17%

Whenever I put my computer into sleep mode, it goes to sleep normally, but then about a second after the fans stop spinning, the whole thing comes out of sleep mode as if a button was pressed or something. Power cfg -requests gives me

DISPLAY:
None.

SYSTEM:
[DRIVER] \FileSystem\servnet
An active remote client has recently sent requests to this machine.

AWAYMODE:
None.

EXECUTION:
None.

PERFBOOST:
[DRIVER] Legacy Kernel Caller

I have checked my network adapter to make sure that it is unable to wake the computer, so I am kind of stuck right now. Any ideas?

Answer:Computer Won't Stay in Sleep Mode

If you're still having problems with PC staying asleep check the settings here:
Have you checked the settings here:
PowerOptions>Edit plan settings>change advanced power settings>Sleep>Change settings to disable.

1 more replies
Relevance 56.17%

My computer won't switch to sleep or idle mode if it's left on but not in use. I believe this can over time damage your moniter. It's probably a simple fix but my knowledge of computers is basic. Any help would be great!

Answer:Computer won't switch to sleep mode

What computer? What operating system? Has it always been like this? etc. Details are important.

3 more replies
Relevance 56.17%

My computer used to go into sleep mode with no problems. I recently wiped the hard drive and did a clean install of Windows XP Pro w/SP2.

Now when I put it in sleep mode, it goes in just fine, but when I bring it back out, it brings up the wallpaper with no icons or taskbar or anything else. Then after about 30 seconds, I get the blue screen of death and have to force it off. It will hibernate with no problems.

I tried a repair which looked like it was adding files, but it still won't go into sleep mode.

Any suggestions as to what I can check?
 

More replies
Relevance 56.17%

I went over to my boyfriend's house to hang out after he got off work and went to use his computer. It was in sleep mode, so I hit the power button and it turned on. The current tab open in his Opera was a porn video that was in the middle of running and resumed when the computer turned on. The tab before it that was minimized was the homepage of the porn site. I could click the "back" button and go one page back to the official home page of the porn site, not the video home page. And the video that was playing appeared to be a tab that opened when one of the video thumbnails was selected.

My boyfriend swears that he did not look for this, that when he left his computer that morning, he had been on 4 Chan (a shady anonymous message board) reading about video games. Someone had posted something about an actress appearing in something, so he googled her and her porn site came up, so he closed the window promptly.

He swears up and down that he has no idea how it got on his screen. That he set his computer aside and went to work. It had been in sleep mode when I found it, because it wouldn't respond just when the track pad was touched or clicked. I checked the energy saver for sleep mode and the display turns off after fifteen minutes, but the computer is set to never go into sleep mode. There was no browser history in his Opera internet browser.

I really want to believe him and he's always been incredibly truthful and trustworthy, but I'm not sure how this c... Read more

Answer:Is it possible for popups to come up while a computer is in sleep mode?

Not to dash your hope, but windows can not pop up when the computer is a sleep. Also, I have never heard of browser windows just popping up by themselves, unless someone was already in the browser surfing the web, unless the computer had a serious infection, which means it's a Windows PC. And the only way his computer could get an infection that would pop that kind of stuff up is from a site that shows that kind of stuff to begin with. Or so my personal experience has been with fixing other's computers. You don't get porn popups unless you have been surfing porn sites.

1 more replies
Relevance 56.17%

I looked and this may have been covered before but I did not see it. When I let my computer sit for several minutes the screensaver will come on and then after another few minutes the computer goes into sleep, When I move the mouse or hit a button to bring it awake, it goes to a black screen or background art and the only way to fix it is reset the computer. I have also tried bringing it awake with the power button but it is a 50/50 chance of working or getting the above mentioned screens. Any thoughts??

Answer:Computer freeze in sleep mode

The first thing is to disable or change screensaver displayed and also close other/all programs running or open then check sleep mode. Also check your power options settings.

2 more replies
Relevance 56.17%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 640 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 4
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce GT 240, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 860151 MB;
Motherboard: ASUSTeK Computer INC., M4A88TD-V EVO/USB3, Rev X.0x, MT7008008202569
Antivirus: AVG Anti-Virus 2011, Updated and Enabled

So, not always, but once in a while... usually when it's been in sleep mode for a while, the computer will get stuck. Doesn't matter how much I move the mouse or hit anything on the keyboard, I get nothing. Even the off an reset button don't do anything. What I generally have to do is turn off the PS and then boot the computer. When Windows starts up again, everything I had going before sleep mode pops back up, though it does take longer than a normal boot. Anyways, thats my problem. Any suggestions?
 

More replies
Relevance 56.17%

I know that there's a good powercfg command line call that can tell what last woke up computer from sleep:

powercfg /lastwake

what I need is a reverse -- command/software to tell me what was the last process that put computer into automatic sleep?

PS. I've done all the usual checks in the power settings and such. None were found. The system in question has some running service/process that puts it into automatic sleep after a predictable amount of time. I just need to find which one it is.

More replies
Relevance 56.17%

I have a compaq presario v6000 laptop with vista that will startup windows for about 2 seconds and then apparently goes to sleep mode.(blank screen lights all on no noise from drives) When I shut it down using the power button and restart, it goes to the screen where you can choose safe mode etc. When it is run in safe mode it works fine.I dont have any discs for it and this machine was never backed up internally. Im not sure what direction to go with this any help would be appreciated.

Answer:computer goes to sleep mode at startup

Under your screen hinges you will see a little pointy button that sticks up. Is this bent or deformed in any way and is it all the way out?Also when in safe mode you need to go into power saving options in control panel and turn off sleep mode for everything.

9 more replies
Relevance 56.17%

Hello everyone, I'm new here so please be patient.  My computer will work fine, then when I'm not using it after about three minutes of the screen saver being on, the monitor goes black with "no input signal" flashing and my computer is still on.  After a few more minutes the fan kicks on, and I have to hold the power button down and re boot the system.  I've tried re-installing the video drivers but it didn't help.  My video card is an ATI Radeon HD3200, I'm not even sure if that's a good one but I'm a basic PC user.  Basically, after being idle the computer signal is not getting to the monitor???  I'm running Vista 64 bit.thanks in advance for your help

Answer:Sleep Mode Freezes Computer....PLEASE HELP!!

Hello,I am also having a similar problem.  It started once about a month ago.  The system froze up and I had to unplug it.  It would not shut down by using the button.  I waited a while and then restarted it and the fan ran real hard.I let it set unplugged, all night and tried again.  It worked.  I then got an error message saying a vidoe pack maybe causing my computer to run slow and went to Windows and installed all new updates.I did not have anymore problems until yesterday.  It was frozen again and I am not able to get it to come on.  The fan is running very hard, but nothing on the monitor.I tried to let it set again all night, inplugged, but nothing.It seems this maybe an ongoing problem with this system?I purchased my system right at the time that the Vista wasn't installed, but when it was released, they sent me the software to install it.  I had heard so many bad things about it, that I never did install the software.  Could that be part of my problem?I hope that it is something small and that we don't have to replace our systems.  Good luck to you on getting your system up and going!

14 more replies
Relevance 56.17%

Hey,

I've got a brand new (4 days old) Intel DQ35j0 MB and it won't stay in sleep. It will for about three minutes then it "wakes" up again. I tried unplugging the mouse and keyboard thinking maybe either one was sending a signal and causing it but no luck. Also, I need to update the BIOS. Is there anyway to do that without a floppy disk?

Thanks
 

Answer:Computer Won't Stay In Sleep Mode

Why do you "Need" to update the BIOS. Usually, you want to leave the BIOS alone unless you know of a solid reason to update it. Updating the BIOS is a risky procedure that can sometimes destroy a computer, unless you have experience.
Usually, you can fix the sleep issue by changing your settings in the control panel, or updating the driver.
 

2 more replies
Relevance 56.17%

Alright guys, first time using a forum. So please excuse me if I do something wrong or say something stupid.

So for the last few weeks I started getting this blue screen error. I have tried to do some things on my own, but I'm not a computer guy. I've noticed that my computer only Blue Screens when my computer goes into sleep mode with an internet browser open.

The Blue Screen reads DRIVER_POWER_STATE_FAILURE along with the code 0x0000009f.

I used the tool this sight told me to download, I have the minidump and the other things the tool put in the folder.

My computer is HP Home Premium 64bit.

Let me know what else you need to know.

Thank you,

Answer:BSOD while computer is in sleep mode

Code:
BugCheck 9F, {3, fffffa800591d060, fffff80004870518, fffffa8005bc3b80}

Probably caused by : pci.sys

Code:
0: kd> !irp fffffa8005bc3b80
Irp is active with 5 stacks 3 is current (= 0xfffffa8005bc3ce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa80068f0050 00000000 00000000-00000000
*** WARNING: Unable to verify timestamp for rtl8192Ce.sys
*** ERROR: Module load completed but symbols could not be loaded for rtl8192Ce.sys
\Driver\RTL8192Ce
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa80068c9910 00000000 fffff80002f0e200-fffffa80099be640 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80099be640

Args: 00000000 00000000 00000000 00000000

Code:
0: kd> lmvm rtl8192Ce
start end module name
fffff880`05e41000 fffff880`05fb4000 rtl8192Ce T (no symbols)
Loaded symbol image file: rtl8192Ce.sys
Image path: \SystemRoot\system32\DRIVERS\rtl8192Ce.sys
Image name: rtl8192Ce.sys
Timestamp: Tue Jul 12 05:09:44 ... Read more

9 more replies
Relevance 56.17%

My computer goes in energy save mode as soon as I turn it on. There is nothing on the monitor. I tried the monitor on another computer and it works just fine. help

Answer:my computer goes into sleep mode as soon as I turn it on. Nm

Did you look at the power options in the control panel? You should be able to reset it.How do you know when a politician is lying? His mouth is moving.

7 more replies
Relevance 56.17%

I know that there's a good powercfg command line call that can tell what last woke up computer from sleep:

powercfg /lastwake

what I need is a reverse -- command/software to tell me what was the last process that put computer into automatic sleep?

PS. I've done all the usual checks in the power settings and such. None were found. The system in question has some running service/process that puts it into automatic sleep after a predictable amount of time. I just need to find which one it is.

Answer:Is there a way to find out what put computer into sleep mode?

  
Quote: Originally Posted by dc2000


I know that there's a good powercfg command line call that can tell what last woke up computer from sleep:

powercfg /lastwake

what I need is a reverse -- command/software to tell me what was the last process that put computer into automatic sleep?

PS. I've done all the usual checks in the power settings and such. None were found. The system in question has some running service/process that puts it into automatic sleep after a predictable amount of time. I just need to find which one it is.


Well the place to start is in your Windows System log--look for Kernel-Power. Here's my last:


Code:
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 2/7/2016 6:54:13 AM
Event ID: 42
Task Category: (64)
Level: Information
Keywords: (4)
User: N/A
Computer: Latitude
Description:
The system is entering sleep.

Sleep Reason: System Idle
You may have to examine the events around this one as well to help you understand what happened.

1 more replies
Relevance 56.17%

Hi guys.

My laptop is really starting to irritate me. Whenever it get's in sleep mode I have no other choice then to wait for the bluescreen or to restart it...

I've been using Bluescreen view and tried to solve the problem myself and it seemed that to different files where causing the problem. I think I've fixed the problem with athrx.sys with installing a new driver to my wireless card, cut the ntoskrnl.exe I can't seem to figure out.


Cheers!

Answer:BSOD while computer in sleep mode.

I do think that the updates for the wireless card should have fixed your problem, the reason ntoskrnl was being blamed is because often times the actual driver at fault will make calls to the system kernel (ntoskrnl) and cause it to do things it shouldn't do and thus is blamed for the problem.

3 more replies
Relevance 56.17%

My Win 7 (Home SP1 x64) crashes while on sleep mode. I attached the result of running the SF Diagnostic tool.
Any help will be greatly appreciated.

Answer:BSOD while Win 7 computer in sleep mode

Your recent bugchecks doesn't clearly point the finger to a particular
driver but they do hold clues as to what is going on.


Code:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)

Arguments:
Arg1: ffffffff80000003, The exception code that was not handled
Arg2: fffff80003485a10, The address that the exception occurred at
Arg3: fffff880076c8538, Exception Record Address
Arg4: fffff880076c7d90, Context Record Address





Quote:
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoints with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control.



Code:
fffff880`076c8778 fffff880`00ef9028 nt!DbgBreakPoint
fffff880`076c8780 fffff880`00ef362d Wdf01000!_FX_DRIVER_GLOBALS::WaitForSignal+0x70
fffff880`076c87c0 fffff880`00ef33f0 Wdf01000!FxIoQueue::StopProcessingForPower+0x1ed
fffff880`076c8810 fffff880`00ef31a8 Wdf01000!FxPkgIo::StopProcessingForPower+0x22c
fffff880`076c8880 fffff880`00ef3131 Wdf01000!FxPkgPnp::PowerGotoDx+0x64
fffff880`076c88c0 fffff880`00ef0c3c Wdf01000!FxPkgPnp::PowerGotoDxArmedForWakeNP+0x9
fffff880`076c88f0 fffff880`00ef1106 Wdf01000!FxPkgPnp::PowerEnterNewState+0x1d8
fffff880`076c8a50 fffff880`00ef0e9f Wdf01000!FxPkgPnp::PowerProcessEventInner+0x13e
fffff880`076c8ac0 fffff880`00efa687 Wdf01000!FxPkgPnp::PowerProcessEvent+0x1b3
fffff880`076c8b60 fffff880`00eeefea Wdf01000!FxPkgFdo::DispatchDeviceSetPower+0x117
fffff880`076c8bb0 fffff880`00ee69da Wdf0100... Read more

5 more replies
Relevance 56.17%

Ok, whenever I turn on my computer it all sounds ok, but my monitor just shows up with "DSUB Power Saving Mode" for about five seconds then goes back to black. I've tried a different monitor, and I've tried plugging it into different sockets, but nothing works. I had the same problem a while ago, but it kind of sorted itself out, and I don't know how.

It might be down to the computer itself being knocked a bit, but I doubt it, since its been through much worse.

Has anyone else had this problem? Help would be much appreciated...

Thanks
 

More replies
Relevance 56.17%

I like using sleep mode for a quick shut down/computer lock, but ever since switching to an SSD, it doesn't lock when I put it to sleep.

Is it possible to have the computer lock in sleep mode on SSDs?

Answer:How to get SSD to lock computer when I put it in sleep mode?

It does not matter that you are using an SSD. See this tutorial.

Password - Require on Wakeup

6 more replies
Relevance 56.17%

Hi,
 
I actually have two problems. First, when I try to restart the computer after hybernation, I get a blue screen with error listings. I have to shut down and reboot, sometimes more than once before I can restart Windows.
 
2. I have a Nokia Lumia phone that uses Zune to connect to my computer; however, I get an error message in Zune that says that 'My video hardware isn't compatible with Zune' but, I can't find the video hardware in Device Manager.

Answer:Computer crashes after sleep mode

The video hardware is under 'Display adapters'. Click on the '+' sign at the side of 'Display adapters' and it will open up to show you your video hardware, and indicate if there are any problems with it.
 
Apart from that, it is a little difficult to help much further without knowing what sort of computer you have. So - make and model please and what version of Windows you are running. And, once you find it in 'Device manager' - what video card have you got ?
 
Chris Cosgrove

8 more replies
Relevance 56.17%

I keep waking up to my computer being shut down, it says blue screen in the error list.

Here's my dump file, the requested folder, and report

Answer:BSOD When Computer in Sleep Mode

The single dump blames scmndisp.sys, your NetGear device
Update the driver Support Home Page


Code:
BugCheck A, {0, 2, 1, fffff80003890c9c}

*** ERROR: Symbol file could not be found. Defaulted to export symbols for ndis.sys -
Unable to load image \SystemRoot\system32\DRIVERS\scmndisp.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

7 more replies
Relevance 56.17%

Hi everybody!

I'm using Windows 7 build 7000, I have problem: When I put computer to sleep mode, and when I press any key to "Wake up" the computer, but it don't return.

How can I solve problem?

Answer:Computer don't return from sleep mode

  
Quote: Originally Posted by QuocHungVNUIT


Hi everybody!

I'm using Windows 7 build 7000, I have problem: When I put computer to sleep mode, and when I press any key to "Wake up" the computer, but it don't return.

How can I solve problem?


I have this bug too in W7 & the way I fixed it was to press the Power button instead of pressing Enter on the KB to wake it from Sleep mode.
Even still it doesn't always work & I end up having to reboot the computer to get W7 to load correctly.
It's just a problem with this beta release.

9 more replies
Relevance 56.17%

Hi guys

Like it says on my title. I put my computer into sleep mode when i am stepping away from my computer. It succesfully goes into sleep mode then i come back and it is on wanting a password. So i sit there wondering if i turned it off or not

Well i watched a few days later cause the problem still hasent stoped and i watched it go into sleep mode then a few minutes later turnes back on.

any feedback will be apreciated thanks

Answer:computer turns itself on when in sleep mode

Your network connections may be interfering with Sleep Mode - check the settings.

1. Go to Start, type Device Manager and then press Enter
2. Expand Network adapters
3. Right click a network adapter and then click Properties.
4. Click Power Management
5. Make sure the box, Allow this device to wake the computer is NOT TICKED.

Apply this to all network adapters.

Attachment 137363

9 more replies
Relevance 56.17%

SYSTEM: Windows 7, Home Premium, Service Pack 1 (64-bit)
PROCESSOR: AMD Athlon(tm) II X2 245 Processor 2.90 GHz
RAM: 2GB (1.75GB usable)

Basically, sometimes I switch my computer to Sleep Mode and leave it on Sleep Mode for a whole night. Sometimes it wakes up from Sleep Mode, but I still leave it, and it goes back to Sleep Mode after a while. It happens a few times, but that's not the problem.

When I wake up, I see that the computer is off. When I turn it on, it says that Windows hasn't shut down successfully. I select Start Windows Normally and hit enter. After everything has loaded, I see this:



I clicked on View Problem Details and I got this:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80015FC980
BCP3: FFFFF80004813518
BCP4: FFFFFA8003248280
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\051714-33618-01.dmp
C:\Users\kuba\AppData\Local\Temp\WER-306713-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Answer:Computer gets BSOD when going to sleep mode

Restart start tapping F8 at the OEM name screen select safe mode then follow the instructions below.

Go here Windows Vista/7,Windows 8 & 8.1 BSOD Posting instructions follow all instructions to the letter, using all tools illustrated. Then proceed to the next steps by posting your logs. Keep your posts and logs (logs mini dumps etc...) in BSOD, App crashes, and hangs.

Be patient they get a lot of inquires. Someone will be along to help you.

2 more replies
Relevance 56.17%

I often put my computer in Sleep mode - as a matter of fact I changed the Power button to say Sleep instead of Shut Down.
Just recently it started coming on all on its own even though I'm nowhere near it.
This will happen at different time intervals after I put it to sleep, no pattern, sometimes 10 minutes later sometimes 2 hours.... just depends.

Any ideas what could be going on?

Thanks

A

Answer:Computer starts during sleep mode

Not sure really, but just as a suggestion you might check your BIOS settings to see whats going on. It may be wake on LAN or other settings there that could cause this. Or could something be bumping your mouse/keyboard? (cat, kids, etc.)

9 more replies
Relevance 56.17%

Recently, I restored a drive image to my computer and now, when it is inactive for a while, the screen goes black.

When I re-open it, the screen has an icon that has my name and below that says "locked". When I click on it, the computer starts right up. It did not do this prior to the restoration.

The problem is that when I am creating another drive image which takes about an hour, the compter goes to sleep and stops the imaging program before it completes.

For several days, I have been trying to fix this and stop it from locking up but cannot find the cause.

Any ideas on how to stop it from doing this?

Thanks
 

Answer:How to stop computer going into sleep mode

What operating system are you using?
 

2 more replies
Relevance 56.17%

My computer wakes from sleep mode every 15 mins. The only way I can keep this from happening is to use zone alarm and stop all internet activity. It will still wake one time after I lock the internet, but the second time I hit the sleep button, it will stay in sleep mode until I go back online.

This problem started after I backdated my computer clock, about a year ago, (hoping to get information out of a program that had expired). Since then I have used the system restore disks and restored my computer to no avail. I've checked everything that I can think of that might be trying to access the internet, but can't find what it is. I would appreciate any help.

HP pavilion a730n, pentium 4- 3 GHz, XP Home SP2, 1.5 G DDR 400, 200 G SATA HD, on board video and sound, AVG free v.7.5.432, Zone Alarm v.6.5.737.000, DSL internet connection.
 

Answer:Computer will not stay in sleep mode

I'm afraid sleep mode was the wrong term. It should have been Standby mode. Sorry.
 

1 more replies
Relevance 56.17%

when I close my computer or leave it for an extended period, it goes into sleep mode but I can't get it out of that mode. My screen goes blank but the little half moon does not light up where it used to. I have to shut the computer off every time I am not using it for a while. Any idea why this might have changed or what settings I can check? Thanks
 

Answer:I'm having trouble with my computer in sleep mode..

Any clues available as to what kind of computer hardware we have here?
 

1 more replies
Relevance 56.17%

after starcraft 2 patch 1.1 my computer went to sleep and will not come back on i tried reseting via powering on and off both with the power button and the on off switch on my surge protecter both times the computer powers on for a few seconds then returns to sleep mode and will still not come back i also tried inserting a dvd to activate the autoplay function but that also failed to work any suggestions ? is this a known issue with any virus?

Answer:awaken computer from sleep mode

if it is a desktop, why are you using sleep mode? Sleep mode is basically only used on laptops to preserve powerSome HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 56.17%

Hi,

I currently have a genuine 64bit version of Windows 7, it's installed on my brand new PC with an Intel Q9550, ATI XFX 4890 graphics card, 4gb RAM. The PC is connected to my BenQ monitor with a DVI output. Earlier today i accidentally put my computer into sleep mode, my brother not knowing it was on sleep mode, turned the PC on/off from the mains and noticed it was not booting fully.

The computer powers on, there is no "beep" and i get a message on the monitor saying no signal detected . The mouse and keyboard are not working during boot up. I have tried resetting and shutting down, but the problem remains. I hope i don't have to format as i have not backed up the data for some time.
Thank You.
 

Answer:Computer Not Booting After Sleep Mode

10 more replies
Relevance 56.17%

I have a computer with vista and it cannot enter into sleep mode even though I have it set at 20 minutes. I even have to monitor set to shut off every 10 minutes but it doesn't even do that. The only thing it will do is enter into screen saver. My guess is that its the monitor causing it not to enter into sleep mode. My monitor is a 24" samsung 245bw. Thanks in advance for your help.
 

More replies
Relevance 56.17%

hi i woke up this morning to find my computer in sleep mode as usual however when i move my mouse to wake it up as normal nothing happens , my mouse which is a razer naga wakes up and lights up but my computer and keyboard show no change, i tried pressing the power button and reset button but nothing happened.
Eventually i resorted to turning off the power to the tower until the blue power light stopped blinking and then managed to boot the pc up, when it did boot up it had everything open from last time as if i had just woken it up as normal , i shut down the computer normally to see if that may fix the problem but to no avail.
I am able to reproduce the problem by manually selecting go to sleep on the shut down screen.
Recently i have been having some problems which playing guild wars 2 with the bsod which i posted here a week ago Bluescreen during GW2
I updated my graphics card driver to the latest beta drivers the day i posted that thread and since then only had the game crash once and i suspect that was due to overheating as i have my pc in a very small stuffy room and i remember it being uncomfortably hot that evening since then i keep the windows open and had the side plate fo the case removed to give it more circulation for a while.
Im really not sure what causeing this problem the pc runs fine when its up and running and it boot up from full shut down no sweat its just this odd sleep mode problem.
thank you for your time.

Answer:computer will not wake up from sleep mode

recently try system restore and that seemed to fix the problem for the day but the problem poped up again this morning can anyone offer any incite?

1 more replies
Relevance 56.17%

My computer started going into sleep mode when I either:1.) Rip from a CD. It doesn't do it after a specific amount of time, sometimes it will rip the entire CD, sometimes it will only rip 1 track.2.) Burn a CD. Sometimes I can burn an entire CD, sometimes it goes into sleep mode halfway through the process.This is where I thought it was a problem with the CD ROM. But then, it threw me off because it started:3.) Going into sleep mode part way through my anti virus software scanning my hard drive.I've tried formatting, turning off sleep mode altogether. Nothing works. It doesn't completely shut down, because the green power light is still on.Any help would be greatly appreciated. I love my computer but I don't know how to fix this, I'm thinking about getting a new one.It's an IBM ThinkCentre with Windows XP.

Answer:Computer goes into sleep mode randomly

It doesn't sound like sleep mode to me... It sounds like a problem our Dell's had at one time... The computer display just goes blank on it's own and then more frequently.  How do you know it's in sleep mode?  How do you get it to wake up?  Do you have to power it off and back on?  Our Dell's had a bad motherboard issue.  The box was so confined it was burning them up.  Look at your board and check the capacitors for heat symptoms.. ie. bubbling over or expanding.

6 more replies