Computer Support Forum

Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

Question: Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on ‎7/‎13/‎2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes."

I'm running: Windows 7 Professional 64-bit SP1
Previously I thought it was my NVIDIA 8600M GT graphics card driver, but the problem persisted even after uninstalling the driver. So I'm not sure if it has anything to do with the card anymore.

Can anyone help me get to the bottom of this? If any other information is needed, let me know and I'll get on it.

Relevance 100%
Preferred Solution: Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 95.41%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 91.35%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 87.58%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 86.42%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 86.42%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 86.13%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 86.13%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 86.13%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 85.84%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 85.84%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 85.55%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 84.97%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 84.97%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 84.97%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 84.97%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 84.97%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 84.97%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 84.97%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 84.97%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 82.94%

The bluescreens are really random and like to happen out of no where. I could be playing League or Blade and Soul and it when it happens. I usually always have chrome open in the background watching something. Some days PC would boot up and I would have to restart because it's slow and not opening anything. I would appreciate some help on to solving this problem or finding this defective part.

Answer:Multiple BSOD caused by "Thread Stuck in Device Driver"

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the display drivers using custom/advanced options.
Attachment 61916

Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
4: kd> lmvm atikmdag
start end module name
fffff801`64ed0000 fffff801`6662b000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Dec 23 16:58:26 2015 (567AC4A2)
CheckSum: 016EC495
ImageSize: 0175B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

2 more replies
Relevance 82.94%

The bluescreens are really random and like to happen out of no where. I could be playing League or Blade and Soul and it when it happens. I usually always have chrome open in the background watching something. Some days PC would boot up and I would have to restart because it's slow and not opening anything. I would appreciate some help on to solving this problem or finding this defective part.

Answer:Multiple BSOD caused by "Thread Stuck in Device Driver"

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the display drivers using custom/advanced options.


Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
4: kd> lmvm atikmdag
start end module name
fffff801`64ed0000 fffff801`6662b000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Dec 23 16:58:26 2015 (567AC4A2)
CheckSum: 016EC495
ImageSize: 0175B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

0 more replies
Relevance 80.62%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 106.19%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 105.78%

I just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!   

Answer:The driver WUDFRd failed to load...

i have similar "issue" with my W520: Log Name:      SystemSource:        Microsoft-Windows-DriverFrameworks-UserModeDate:          29. 7. 2011 0:49:19Event ID:      10114Task Category: Startup of the UMDF reflectorLevel:         InformationKeywords:      (2)User:          SYSTEMComputer:      ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.    Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          29. 7. 2011 0:49:19Event ID:      219Task Category: (212)Level:         WarningKeywords:     User:          SYSTEMComputer:      ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3.  in my case it is related to external USB hard drive, which is displayed... Read more

9 more replies
Relevance 105.78%

 I'm getting a warning in the event log upon startup.  Windows 8.1 Pro.   This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error.  What is WUDFRd ?  All the information I can locate refers users to their OEM for a driver update..  Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          2/10/2015 11:24:03 AMEvent ID:      219Task Category: (212)Level:         WarningKeywords:     User:          MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />    <EventID>219</EventID>    <Version>0</Version>    <Level>3</Level>    <Task>212</Task>    <Opcode>0</Opcode>    <Keywords>0x800... Read more

Answer:The driver WUDFRd failed to load...

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

1 more replies
Relevance 104.55%

We used to have "stereo mix" option that enabled streaming audio recording without having to have the audio playing through the speakers. How do I do that now? What replaces that capability? Who makes my sound card? Why is that not readily available somewhere in Dell land? I can't believe forum searching found pretty much nothing on this.

Answer:Latitude E6530 Windows 10 no "stereo mix" option for sound input device, only "high definition audio device" with Microsoft driver and unknown manufacturer.

aj_chicagoWho makes my sound card?
Hello. The audio chip manufacturer was IDT.
aj_chicagoWhat replaces that capability?
IDT doesn't have "stereo mix", so I'm not sure how you used to have it on the E6530. IDT has an equivalent capability that it calls Rec.Playback. That can be found in the list of recording devices, after the IDT driver is installed.
aj_chicagoHow do I do that now?
Dell doesn't support audio on an E6530 that has had Win10 installed. The IDT company went out of the consumer audio business long before there was a Win10 OS, so there is no Win10 IDT driver for that model. Your computer is currently using the Windows native audio driver, which, as you say, does not support a stereo mix kind of feature.
You should be able to install the IDT driver for Win7 by installing with compatibility mode.
1. Download and save the audio driver to your desktop or any convenient location on the hard drive.  [There are two "formats" on the driver's page. Scroll down to the 2nd one, named "Hard Drive" format, and download that one, not the 1st one named "Windows Update Package".]2. Double click on the new folder to extract (unzip) the driver files.3. The extractor wizard will create a new folder for the driver files. It will be at "c:\dell\drivers\xxxxxx". Write down the exact location that the wizard creates. 4. If the driver begins to install automatically, halt (cancel) the installation.5. Browse to the dri... Read more

1 more replies
Relevance 104.55%

I tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!

Answer:Driver WUDFRd failed to load - Event ID 219

It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):

3 more replies
Relevance 104.55%

I formatted my computer, installed winxp sp2 and the driver for my multimedia device was lost, i ran everest to check what it was and its SiS 7012 audio device, an odd thing was when it said my motherboard name is unknown, its a laptop.
I downloaded different drivers but non of them were succesful, i tried installing one and a failure error pop up, "failed to install driver for windows xp" (check link or thumbnail), i tried installing winme.exe for windows ME driver but it didnt work, tried changing install directories but didnt work either. i donwloaded drivers from SIS home page but didnt work either. please help, i am most concerned about my sound device rather than the mother board, here are my specs.

http://img211.imageshack.us/my.php?image=failed2wm.jpg

Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2600 MHz (13 x 200)
Motherboard Name Unknown
Motherboard Chipset SiS 648FX
System Memory 512 MB (PC2700 DDR SDRAM)
BIOS Type AMI (01/12/04)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter ATI Mobility Radeon 9600/9700 (M10/M11)
3D Accelerator ATI Mobility Radeon 9600/9700 (M10/M11)
Multimedia:
Audio Adapter SiS 7012 Audio Device
Storage:
IDE Controller SiS PCI IDE Controller
Disk Drive TOSHIBA MK602... Read more

Answer:SiS 7012 audio device "failed to install driver for Windows XP"

Hello and welcome to Techspot.

Go to your laptop manufacturers website. You should be able to get your drivers there.

Regards Howard :wave: :wave:
 

14 more replies
Relevance 104.55%

I have a Yiynova tablet monitor and its been working fine for about a month. I recently tried to download the beta version of a NVIDIA GeForce update (bad idea) and had to reinstall a previous version. After that, things started to go south for my tablet.

I uninstalled and reinstalled the tablet driver, and tried to plug it in a different USB port and it came up with the same message.

Is there a step that I'm missing?

I have dual screen setup, and that's working fine, but the driver that senses the pen just isn't installing, even though I installed the driver program.

I appreciate any ideas on how to fix this.

Answer:Yiynova tablet monitor "device driver failed to install"

The problem wasn't solved, but I believed I narrowed down the problem. The driver doesn't seem to fully install.

1 more replies
Relevance 104.55%

Greetings all.

I monitor installation of apps with Systrace and Comodo Programs Manager. Using the latter, which includes the ability to uninstall Drivers, I've encountered a disastrous problem:
Specs:
Dell Inspiron 1525 laptop
Intel 2 x 2.0GHz, 8GB DDR2, 320GB 7200 HDD (20+GB free)
Windows 7 Ultimate 64bit, fully patched, updated and maintained
Norton IS 2012, Malwarebytes, Mamutu, Windows Firewall (regularly run Kaspersky, ESET, etc., scanners offline. No malware.)
Have 350+ third-party apps installed for reference, testing and troubleshooting others' computers.

Problem: Using Comodo Programs Manager (CPM) I uninstalled Windows Mobile 2003 Device Driver which required a reboot to complete and, now, I cannot boot the system. The Windows logon screen appears, a message displays, saying CPM's "Force delete jobs completing...". The system freezes there with a black screen, the mouse cursor responds but there is no other activity. Even the LED showing HDD activity ceases.

Attempted solutions:
-- Safe Mode(s), Last Known Good Config, etc., Startup Repair, (System Restore has been disabled.) To make matters worse, I carelessly began to run Windws 7 installation repair as though it was XP. Before I caught the mistake and cancelled, 7 had already begun to copy files. Now I have the SystemRoot as "windows\windows".
-- BCD rebuild successful but still have the "windows\windows".
-- SFC starts but will not complete from Windows RE Comm... Read more

Answer:Failed device-driver uninstall with "forcedelete" loop

"Have 350+ third-party apps installed for reference, testing and troubleshooting others' computers"... You should keep these on a separate hard drive or on an optical disk, but you actually know this already don't you You computer should be set up to easily reloaded as mine is, in case of a "disastrous problem" like you are having now. There's really no excuse
 

9 more replies
Relevance 103.73%

Guys,

Please review this issue for me as I need the answer for my references. This sometimes applies to setting up a new Internet Connection in Win 95 or 98. Let's say, that you have set up a new Internet Connection with new ISP path settings. Your asked to do a system restart, you do a restart and all is well until you get to a second screen in the bios that either says:

"Ethernet Adaptor failed to load press any key to retry" OR

"Ethernet driver failed to load press any key to retry"

I can't remember what the message says, but it's one or the other! after the word "Driver" or "Adaptor" it gives the driver name. You CAN however still get into Windows by pressing any key....But, the message will come up until you remove the driver.

I vaguely remember that to remove this message you go under Device Manager, under "Networking" and remove a device that has an exclamation point under it (This removes the network driver that doesn't load) But what does this message mean and how does it happen to get there in the first place? I know that it happens when setting up a new Internet Connection sometimes, but I need to know the exact steps for removing the driver because I might be changing ISP's in the future, and need to know what to do if this message comes up again! Thanks!

Jack
 

Answer:What Does "Ethernet Driver Failed To Load" Mean?

i think the message means that the driver is corrupted/not responding

why it happens, i dont know, but if u are installing a separate software to connect to your isp, this software might be the problem

the proper way of removing the driver is to delete it from device manager
 

1 more replies
Relevance 103.73%

Hello everyone. Hope you are all doing good today and able to beat the heat on this very hot day. I have this really old laptop HP Pavillion dv6000. Originally it came with Windows Vista installed back when Windows Vista was first released but eventually I upgraded the laptop to Windows 7. Everything was fine and working until recently where the laptop has no sound. I try to install the sound driver from the HP website and it says "driver installation failed: could not find the device for this driver." No matter what I do I cannot get sound on this laptop. If I go to YouTube and watch a video the video plays just fine but with no sound. When I click on the sound icon next to the time on the desktop bar a window pops up that says "troubleshooting has completed" Problems found: "Hardware changes might not have been detected." I am not sure what is up with this or how to fix it but any help is appreciated thanks.

Answer:It says "driver installation failed could not find the device for this driver"

A Vista laptop likely doesn't have Win7 drivers written...try re-installing the originals from the Driver CD and reboot...Plus it's likely you are trying nVidia or AMD drivers gettin it to work which is a no-no on a laptop....

6 more replies
Relevance 102.09%

I have two issues, which I think are related. In the Device Manager, it shows under USB Controllers "Unknown device". "Windows has stopped this device because it has reported problems. (Code 43)"

I tried updating the driver, but the driver was correct.

I tried disabling the device.

I uninstalled the device. Windows reinstalled it at next boot, but the problem reappeared.

There is no Imaging Devices in the Device Manager.

At the same time, my webcam failed to open. Message "Webcamera initialization failed."

I downloaded the correct webcam program from Toshiba, installed it, but same result.

This all started when I uninstalled and reinstalled Skype. I have tried uninstalling it again, but still no webcam.

The webcam is enabled in the BIOS.

I really do not want to reinstall Windows.

All help appreciated.

Toshiba Satellite P500 16J
Windows 7 Ultimate x86
All updates installed

More replies
Relevance 102.09%

I just installed Windows 2000 a few days ago.

When I start the computer and the log-on window comes up there is an error window that pops up in front of it.

\systemroot\system32\drivers\fastfat.sys device driver could not be loaded. Error status was 0xc0000020

What do I need to do to fix that problem?
 

More replies
Relevance 100.45%

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

Answer:The driver \Driver\WUDFRd failed to load

you ever resolve this?

1 more replies
Relevance 100.04%

Hi, I'm trying to reinstall my sister's scanner driver because XP has decided that it's not there any more. This happens occasionally and usually reinstalling the driver fixes it (I think that's what I did last time), but this time i just can't get it to work.

If i unplug the USB cable then plug it in again, it comes up with a message saying that the device has malfunctioned and it doesn't recognize it. I have the driver CD but windows always manages to install it as "Unknown device" before i can tell it to search the CD. I've tried telling it to reinstall the driver from the CD but it says that there are "no better matches for this device". I've also tried uninstalling the program form the CD and reinstalling it then restarting the pc but that didn't help either. I tried plugging it into another USB port (as suggested by Windows Help Center) but that still didn't work.

It's not often that something like this gets me in a circle and scratching my head but I'm really starting to run out of ideas.

Any help would be very appreciated, i just want to get this thing running again
 

Answer:Stubborn Scanner Driver - "Malfunctioned Device" and "Unknown Device"

Could it be that the scanner really did die?
 

2 more replies
Relevance 100.04%

The computer I got is second hand and has always been quite unstable. I usually get bsod if I leave the computer running for 15 minutes without any heavy programs in the background (IRQL not less or equal OR memory management). But recently I've been getting them while I play Skyforge. I'll play for 10 minutes then the cursor becomes all glitchy, in game the sky has all these red lines (obvious because of the graphic cards) then after about 30 seconds the screen goes to black. Then the bsod appears and the computer restarts.

I've already done a clean reinstalled of my NVIDIA driver but the problem still persists.

Any help would be appreciated.

Answer:BSOD playing Skyforge, "Attempt to reset the display driver failed"

Any help??

3 more replies
Relevance 98.4%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

Answer:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

8 more replies
Relevance 98.4%

Hey everyone,

I am new to this forum, so please excuse me any layman propensities I might exhibit here.

So, I am lucky (at least that was my initial thought) owner of a brand new Asus Zenbook UX32LA, 256 SSD GB, 8GB Ram netbook with win8/64bit OS. After cofiguring the computer I ve been experiencing multiple BSODs pointing most probably to memory problems. It's really annoying, as the netbook is new and I tend to get at least to BSODs per day for the last 10 days just during net-browsing. I looked up the graphic drivers if they are up-to-date, but the problem still persists.

I would appreciate any help on this.

Attached is the rar file.

Have a great day!

teetotallerm

Answer:multiple BSOD - mostly "IRQL driver not less or equal"

The reports are incomplete. Please rerun the data collection app and let it run for at least 15 minutes (or until the app itself says that it's done). Then zip it up and upload it. In particular, I'm looking for the MSINFO32.nfo and systeminfo.txt reports.

Out of 16 memory dumps there were 8 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized. i5 and i7 processors can be "auto-overclocked" by using Intel's TurboBoost feature. If so, it's safe to disregard this caution.





Processor may be overclocked!
Expected Fr... Read more

3 more replies
Relevance 97.99%

Bsod after installing paragon hfs4win driver. Wont boot into any mode, including safe mode. Only have the troubleshoot menu and the command prompt. Unfortunately i cant restore my system either. i get an error about 15 minutes after i start that process saying the reset/restore cannot complete.

I have tried restoring using an old reset point, resetting with keeping files, and doing a complete reset, all With same error.

I located the hfs4win.exe file in the command prompt at c:windows/prefetch, but cant figure out how to uninstall it from there. Any ideas on what i can try next?

Apologies for not having system specs available, cant produce a zip file at the moment.

More replies
Relevance 97.99%

I own a Lenovo Erazer X315 Gaming Desktop. For a few months now, it has been giving me the BSOD with the "Thread Stuck in Device Driver" error. I've tried updating my BIOS, as well as my graphics card drivers to no avail. Please help.

More replies
Relevance 97.99%

The problem started when I downloaded and started to use bluestacks. This happens roughly odd number of times I run Bluestacks. Prior to that, I never received any such problems. Requesting to please analyze the minidump files and inform me about the problem causing driver and ways to solve it. Attaching the link for dump file for analysis.

https://onedrive.live.com/redir?resi...796F88D5%21105

Thanks!

Answer:"Device Driver Detected Violation" BSOD with Bluestacks

Still waiting for a reply...
Anyone?

2 more replies
Relevance 97.58%

Hello, I've been having an issue with BSODs. Usually it happens while playing a game, such as ESO or Morrowind, but sometimes it happens in other cases. The error code is "Thread Stuck in Device Driver." Since it usually happens while playing graphics-intensive games, I have tried uninstalling and reinstalling my graphics driver with Display Driver Uninstaller, but the problem persists. Below are system specs and system minidumps from over the past month.

INSPIRON-15-Wed_01_11_2017_115202_71.zip

Answer:BSOD playing Elder Scrolls Online; "Thread Stuck in Device Driver"

Hello Flambda and welcome to TenForums

I notice that you have not updated the BIOS on your Inspiron 5545 and it is quite old. There is a newer version available and it could make a difference.

5 more replies
Relevance 97.58%

Mods, if you feel that this thread is more of a "Windows" issue, please feel free to move this thread.

Here last year I did my second build because I was having "boot" issues. Wasn't certain what exactly the problem was at the time. But something some how screwed up the boot sequence in my system, and where everything was pretty much "outdated." I just went ahead and did another build.

Though, since then I've been pondering around with the thought of using a SATA to IDE adapter so that I can retrieve what ever salvageable data I can from one of the two HDD's that was in my last build. So I finally broke down and ordered a couple different one's earlier this week.

Unfortunately, I've been running in to some problem(s) when I try to launch with the IDE in place.

Upon initial launching, the boot sequence seem to take some time longer than it normally does with out the IDE HDD in place. Though after a 15-20sec lapse I'll get an error screen displaying an windows error code of "0xc000000e" with a prompt message below stating "The boot selection failed because a required device is inaccessible"

I searched all over online to see what that error code represents, only to get "pages after pages" of sites with each site telling me something different.

I have no intentions of using this as a third HDD in my system. I just want to retrieve select data from it.
 

Answer:Error code "0xc000000e" "The boot selection failed because a required device.........

16 more replies
Relevance 95.53%

I'm experiencing slim keyboard not being recognized in the Windows 8.1
The keyboard was working fine until just one day it just stopped working.
I tried factory reset literally 8 times along with most recent BIOS update and dell's recommended update software. + power setting --> disabling power saving on USB
It still come up as unrecognized each time even with fresh reinstall.
I was wondering if this is a hardware issue or just software bug from factory reset.
I don't think there is a available driver for this kind of problem is there?

Log Name:      Microsoft-Windows-Kernel-PnP/ConfigurationSource:        Microsoft-Windows-Kernel-PnPDate:          8/6/2016 1:09:35 PMEvent ID:      411Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      DellDescription:Device USB\VID_0000&PID_0002\5&1347b1a9&0&4 had a problem starting.
Driver Name: usb.infClass Guid: {36fc9e60-c465-11cf-8056-444553540000}Service: Lower Filters: Upper Filters: Problem: 0x2BStatus: 0x0
 

More replies
Relevance 94.71%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 93.07%

"no audio device" "no playback device" "No Sound Card was found"
ok.. I'm stuck.. puzzled...

I recently had a professional computer fix it company wipe my computer and now I do not have any sound. I do not have even the little icon on the bottom left hand corner to turn volume up or down. My keyboard does not allow me to turn the volume up or down, it seems unresponsive to volume but does light up on the screen showing VOLUME... but of course, there is no volume... I am computer illiterate and thirsty for answers...

Operating System
Microsoft Windows XP Professional (5.1, Build 2600)
Media Center Edition Version 2002 Service Pack 3

System Manufacturer: HP Pavilion 061

System Model
Enclosure Type: Desktop
RC663AA-ABA a1640n

BIOS: Phoenix - AwardBIOS v6.00PG

Processor
Intel(R) Core (TM)2 CPU
6300 @ 1.86GHz (2 CPUs)

Memory: 2046MB RAM

DirectX Version: DirectX 9.0c (4.09.0000.0904)

Control Panel>Sounds and Audio Devices>Volume
indicates "no sound" and Device Volume is all the way to LOW and everything is GREY and untouchable/unchangeable

Control Panel>Sounds and Audio Devices>Audio
indicates "no playback devices" on Sound Playback

Sound recording is working fine as I use skype many times but I can not hear the other party but they can hear me just fine.

Starting with the BIOS, I went into Audio and made sure this was enabled.. it was...

downloaded/installed Microsoft... Read more

Answer:"No audio device" -- "no playback device" -- "no sound card was found"

STLj said:





<snip>
after RUN>
typing in "dxdiag"
DIRECTXDIAGNOSTIC TOOL>Sound
it reads under notes,
"No sound card was found. If one is expected, you should install a sound driver provided bv the hardware manufacturer".

This is where I get fuzzy and lost. Do I need a new sound card installed? Is that the problem?Click to expand...

That dxdiag "no sound card" message is misleading as I've found it says that if no driver OR sound card. I think you're missing the right driver

Also, it would seem from your post you have High Definition (HD) audio. Which means you'll need to find the right High Definition audio driver. (AC97 pre-dates HD audio so the Realtek AC97 couldn't be right)

Try starting on the HP support website HERE and enter your model number or they have a button where they'll try to identify your product and drivers for your model. They should list an HD audio driver there
 

1 more replies
Relevance 93.07%

"The installation failed because a function driver was not specified for this device instance"
I received this message while installing a USB driver. I have an 80GB External USB 2.0 hard drive attached that was working great a few days ago. I logged on one day to find this device "unrecognized". When I checked the device manager, it said that the driver was missing (?!). I searched for the driver on the MS website, and the device manager seemed to find a suitable one, but upon install I got the message above.

I found the old driver on my system which seemed odd to me, deleted it, tried to reinstall and received the same message.

I understand that USB 2.0 is backwards compatible, plus it was working previously, so it seems strange that it suddenly died.

Any help is greatly appreciated.

BOB
 

More replies
Relevance 92.25%

My Computer shuts down and reboots almost daily, possibly about 2 - 3 times a day.
The event viewer system log shows the following error each time:


Code:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 8/22/2012 1:58:42 PM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: BSOTO-PC
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000027 (0xbaad0073, 0xb65d6d20, 0xb65d6900, 0x82b3f7ff). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 082212-30092-01.
Event Xml:
<Event xmlns="Error">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-08-22T20:58:42.000000000Z" />
<EventRecordID>12293</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>BSOTO-PC</Computer>
<Security />
</System>
<EventData>
<... Read more

Answer:BSOD Reboot Daily ((EventID Qualifiers="16384">1001))

Welcome
Its your AVG software, I assume AV. In any event either uninstall driver or update software at website
Avgidsfilterx.sys file descriptionProductname:AVG IDS Description:IDS Application Activity Monitor Filter Driver. Company:AVG Technologies CZ, s.r.o.
If mine, I would uninstall and replace with Microsoft Security Essentials and scan once a week with Malwarbytes.
Start with a system restore point.

1 more replies
Relevance 92.25%

I have been getting the BSOD since a few weeks and found out by trial and error that a USB-hub is causing the problem. Whenever I disconnect the hub before I shut off the computer I do not get the blue screen.
Yesterday I also got a BSOD that mentioned driver power state failure. After I had de-installed Ubuntu 10.04 (I wanted to see what people are talking about but did not really like it) that problem did not show up again, although I do not know if that is just coincidence.

I have enclosed the dump files as per your instructions and hope that somebody will be able to help me.
Thank you.

Answer:BSOD with "usbhub.sys" and "driver power state failure"

Welcome!

It does look as if your USB drivers are causing the issue.
BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 03:41:32.255 2010 (GMT-4)
System Uptime: 0 days 0:31:47.502
BugCheck 1000007E, {c0000005, 9482319c, ad39bb40, ad39b720}
*** WARNING: Unable to verify timestamp for libusb0.sys
*** ERROR: Module load completed but symbols could not be loaded for libusb0.sys
Probably caused by : libusb0.sys ( libusb0+428c )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon May 10 03:46:15.009 2010 (GMT-4)
System Uptime: 0 days 0:00:15.272
BugCheck 124, {0, 8752f544, 0, 0}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon May 10 05:22:31.146 2010 (GMT-4)
System Uptime: 0 days 0:02:23.393
BugCheck 1000007E, {c0000005, 9444b19c, adb53b40, adb53720}
*** WARNING: Unable to verify timestamp for libusb0.sys
*** ERROR: Module load completed but symbols could not be loaded for libusb0.sys
Probably caused by : libusb0.sys ( libusb0+428c )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16... Read more

5 more replies
Relevance 91.84%

Hi,
I sporadically gets the "USB Device Not Recognized Device Descriptor Request Failed"; however, while I have 6 USB devices connected, none of them seem to be the cause of the error. When I use devmgmt.msc to get the Hardware Ids, the value is simply "USB\DEVICE_DESCRIPTOR_FAILURE". I use TARGET software to control two joysticks and a rudder. (Besides these three USB devices I have a keyboard, a mouse and a TrackIR 5). In some instances everything works even though I got the error but in others instances none of the joysticks are working as expected. Sometimes restarting the computer helps or uninstalling the "mystic" USB device, however the problem always reappear and I would really like to get rid of it permanently.
Anyone got some idea what could be causing this?
I have updated all drivers but it did not help.
Thanks,
Klaus

More replies
Relevance 91.02%

Hello
So about a week ago I started receiving the BSOD fairly frequently, about once or twice a day on average. I'm fairly concerned at this point because I do not have any system restore points that date back before the BSOD began occuring. The error I receive when my system crashes consistently says DRIVER_IRQL_NOT_LESS_OR_EQUAL. Additionally, I recently downloaded BlueScreenView to view the minidump files and it appears that ntoskrnl.exe and tcpip.sys are always involved in the problem. Any help is much appreciated! Also as a side note, in the attachment, I believe the three most recent BSODs are the most relevant. Those three are a good sample of the types of BSOD I've been receiving consistently.

Additionally, I'm not sure if this is relevant, but my laptop has been running very hot recently. When I noticed this I downloaded SpeedFan and realized that my CPU temps have been running at upwards of 90C (only when gaming), which I know is a serious problem. The computer that I'm using is a HP Pavilion, which is notorious for overheating issues, and I've never actually taken the time to clean the fans (aside from blowing compressed air into the vents, which I've heard may actually be bad for the computer). I'm hoping that the BSOD is not related to a hardware failure, especially since the error leads me to believe that it is more related to driver issues???

Answer:BSOD occuring daily "DRIVER_IRQL_NOT_LESS_OR_EQUAL"

It is avast that is causing the BSODs.
Code:
BugCheck D1, {0, 2, 0, fffff8800509456b}

*** WARNING: Unable to verify timestamp for aswStm.sys
*** ERROR: Module load completed but symbols could not be loaded for aswStm.sys
Probably caused by : NETIO.SYS ( NETIO!NetioDereferenceNetBufferList+86 )

Followup: MachineOwner
---------
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Report us for any further BSOD after doing it.

3 more replies
Relevance 90.2%

This morning I turned on the computer as usual, opened up some red bull, waiting for Windows to initialize. When it was done, I started my daily routine of turning on Teamspeak, IRC, MSN Messenger and X-Fire. First two programs worked as they should've did, but when I opened Messenger, it gave me a '0xc0000022 failed to initialize' error. I just said to myself, oh well, I'll just reinstall the damn thing and go on X-Fire first, but alas, same error, all of the sudden.

That's when I got... slightly irritated. Firefox still worked, luckily, so I went on google and filled in the error number (0xc0000022). It gave me multiple hits, all indicating to some kind of security error, or something. I tried following the instructions on some sites, to no avail Microsoft's search didn't help me either.

Then it occured to me it could be spyware, but both AdAware AND Spybot wouldn't load :/

This is the point were I got... irritated to no end. All my Games worked fine, just most apps didnt, and all of them are pretty much legal or freeware too.

Basic list of programs that don't work anymore, and there ARE more;

MSN Messenger (7.5)
X-Fire Latest version
Adaware
Spybot
Nero SmartStart
Those are the ones I checked, so there could be even more.

I've installed a fresh install of Windows XP, and the problem isn't present there, I just want to stay on this install though, since there are so many settings and registries that need to be ... Read more

Answer:"0xc0000022 failed to initialize" error occuring on multiple programs

Did you try this one: http://www.opssys.com/instantkb/Article.aspx?id=10176
 

2 more replies
Relevance 90.2%

Hi

When I right click My Computer on Vista Start menu the page says "The page failed to load"

I enclose a screenshot of the error.

I was also get "the application has failed to start because WINBRAND.dll was not found" when running

SystemPropertiesAdvanced

From RUN

This has now been fixed by downloading WINBRAND.dll and copying it to c:\windows\system32

But "The page failed to load" still happens when right clicking My Computer and choosing properties.

I did a SFC / Scannow and something weird happened. The Command Window had an error (apologies - forgot to note which but will rerun in a moment) however the CBS Log File showed no errors and indicated SFC ran successfully.

I will post the results of SFC in a few moments

Thanks for your help.

*************************************************
 

Answer:Solved: "The page failed to load" Control Panel > System

11 more replies
Relevance 90.2%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.This event has never repeated after many reboots.I have not seen any subsequent errors of any sort.Does the absence of repetition indicate that Windows succeeded on the next reboot,or that Windows has given up trying to mend a fatal wound ? ? ?There were 4 off such error events within 1 second, designating these *.MOF filesC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOFC:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWSCOMMUNICATIONFOUNDATION\SERVICEMODEL.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOFI later found that starting a few seconds before that, and finishing a few seconds after,there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-4 original *.MOF files that retained timestamps of last year and before7 original *.MOF files that were halved in size as they were modified44 brand new *.MOF files I have not seen before.Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?Does the continued presence of all these *.MOF files show that after recovery Windows was too lazy to delete redundant files ?Or has it left it all for me to try and recompile or something ?I am hoping t... Read more

Answer:Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

bump

1 more replies
Relevance 90.2%

Hi,
I am getting the error, "Symantec AntiVirus Auto-Protect failed to load.". Not sure what happened the reason for this. I see the Symantec Icon circled with red-cross in Systray. Looks like my Laptop is unsafe.

Please help.

Thanks,
Sid
 

Answer:Getting the Error - " Symantec AntiVirus Auto-Protect failed to load."

I would recommend uninstalling/reinstalling the Symantec software.Do you have the CD or was it preinstalled on the system?
 

1 more replies
Relevance 90.2%

I removed Comodo 3.5 Firewall and completed removal by rebooting the P.C.
I then checked the event logs to confirm all was well.
I found in the Application Event log that about 1 minute after that latest reboot and login there were 4 errors.

All 4 errors were
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 4
"Failed to load MOF" {specific file} "while recovering repository file."

The specific files were
C:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWS COMMUNICATION FOUNDATION\SERVICEMODEL.MOF

Incidentally both the ASPNET.MOF files had a last access date from last year,
so I seems to me that the "Failed to load MOF" was because the was no attempt to read them.
Also .NET v3.0 was purged last year, so the fourth item no longer exists ! ! !

I never knew till then that there had ever been any need to "recover repository files".
There were no further errors when I rebooted 4 times in succession,
so I assumed it was a "one time" failure to recover, and upon the second reboot a full recovery was achieved.
Did I do Good ? ? ?

I then installed Comodo 3.10 Firewall, and the next application event was
Successful auto update retrieval of third-party root list sequence number from:
<http://www.download.windowsupdate.com/msdown... Read more

More replies
Relevance 90.2%

As of the last week, have been experiencing issues with extreme slowness. Reset Firefox to defaults, did not help. PC slows/freezes, when tried to launch task manager, CTRL-ALT-DEL, get message "Failed to load security options" then screen stays black with only that message. At times never unfreezes. After a hard re-boot, goes straight to recovery mode. I have noticed that there are certain error messages such as failed updates. And also, my security defaults have been "turned off" at least once without my doing......... Yikes! I have done a recovery to previous date, and that has helped, but then it starts all over again.... Certain start up items dont load and then the freeze comes again. And again the "Failed to load security options".....

Here are the logs... I believe i got them all....

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:51:20 AM, on 6/7/2014
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v9.00 (9.00.8112.16545)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\Lexmark X1100 Series\LXBKbmgr.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Windows\system32\schtasks.exe
C:\Program Files\Common Files\Pure Networks Shared\Platform\nmctxth.e... Read more

Answer:Very Slow, Often get "Failed to load security options" and freezes

16 more replies
Relevance 90.2%

Legitimate copy of Win Vista Ultimate SP1, all updates through last week ...

When I attempt to open Windows Update, I get an error message "The page
failed to load".

A google search found nothing but the suggestion to delete "System32", am I'm not going there!
 

Answer:Solved: Windows Update "The page failed to load"

10 more replies
Relevance 90.2%

I'll be referring to the image above. The second image that has to do with Outlook Express directly was caused directly after merging some partitions and then changing drive letters. I was using Partition Magic so Drive Mapper supposedly changed all references in the registry. I checked with Microsoft's solution to the problem, but it was of no help (http://support.microsoft.com/kb/191946). I would like to just completely remove Outlook Express if I could. As I was following the instructions, I deleted the registry keys I was supposed to which I think led to the first error message you see. I'm not completely sure though, it could have also been because I applied the Windows Vista Transformation Pack.

Answer:"Address Book failed to load" + Invalid root

*bump* Also, I should say that before the Outlook message used to pop up constantly (every 20 seconds or so) and I've gotten it to only pop up at startup by removing those registry entries.

2 more replies
Relevance 90.2%

Hi Guy
I'm using win 98 and cannot get my Viavoice working.
I keep getting "FAILED TO LOAD LOCAL LANGUAGE MODULE".
This has been an ongoing problem for some time, and was part of a software package from "Time". I've also installed IBM software as a separate voice programme but can't get this to run satifactorily. Time Help is no help, perhaps you can help? Much appreciated in anticipation. Many thanks.

Dicksee

PS Have spent loads of money with "Time"without satisfaction.
 

Answer:Viavoice "FAILED TO LOAD LOCAL LANGUAGE MODULE"

Dicksee
Welcome to TSG!

Not sure if I can help but will try......
It sounds as if you have an incomplete or corrupt installation.
When this happens to any software program the best solution is to uninstall and reinstall the package.
1) Go to start\settings\control panel\add-remove programs and locate the via-voice line listing. Highlight it by left clicking and select remove.
2) If there are other entries referring to voice software remove them to.
3) Restart system into safe mode. During restart keep tapping the F8 key until a selection screen appears and arrow to select "Safe Mode" then hit enter.
4) Once in safe mode go to start\find-search\files and folders and type in *.cpl then hit enter
5) A listing of all control panel applets will appear in right pane.
6) Locate SETNOTE.CPL
7) Right click that applet and select delete.
8) Restart system into normal mode and reinstall the via-voice package.
Note: Make sure you anti-virus software is disabled before and during install.

Hope that helps.....

Dave
 

1 more replies
Relevance 89.79%

I found a thread started by another user entitled: Failed to save System32 Popups Virus CANNOT access anything EVERYTHING is HIDDEN which is extremely similar to my situation with my laptop, but the thread didn't seem to have been resolved.


I am using Windows Vista on my laptop. I was just checking my email and deleting some email messages when everything suddenly closed out and many popups appeared saying: "Failed to save all the components for the file \\System32\\[various numbers]. The file is corrupted or unreadable. This error may be caused by a PC hardware problem." Then another popup "System Check" appeared saying that I need to scan my computer. All of my desktop icons are gone and the background is black.


Some other threads that I've looked through say that you have to access stuff on the start menu, like my computer or my documents. My laptop will let me click on the start menu, but there is nothing on it except for the Program Files.


I used my camera to take some pictures of the screen but I couldn't attach it to this thread. I really, really need my laptop to start working again, and I would appreciate any kind of help!

Answer:Multiple "Failed to save...System32..." Popups Virus on Windows Vista Laptop

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

Please download this file and run it.

If necessary, you can run it straight from a USB drive.

------------------------------------------------------

If you still cannot see some Start Menu items, right-click the Windows Orb (Start button) > Properties and see if these 2 boxes are checked:

'Store and display recently opened programs in the Start Menu'
'Store and display recently opened items in the Start Menu and Taskbar'

If not, check them > OK > Apply > OK.

------------------------------------------------------

We want all our members to perform the steps outlined here:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, you shall have a proper set of logs. Please post/attach the logs in your next reply.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

------------------------------------------------------

If necessary, download and run the tools in Safe Mode with Net... Read more

19 more replies
Relevance 89.79%

Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space.
========================
Got "Page Failed to Load" error attempting to change my Win7-64bit display resolution.
This used to work, but no more ( don't know what might have caused it)

I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.

Please find that file attached -- Any help will be appreciated.....

thank you,
Chuck

Answer:"Page Failed to Load" error attempting to change my Win7-64bit display

Run the system file check again. Sometimes it requires multiple runs. Reboot after each run (or before the first run if you have not rebooted since the last time you ran the check).Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

2 more replies
Relevance 89.79%

Several days ago there was a large number of updates available to download. I allowed the system to update all of them. Three, KB974234, KB972581 and KB973709 it was shown on the update history page as failing to download.
Reading as to a possible solution, I tried to load them manually, saving those files to my desktop, right clicking on each, to run as an administrator. After each loaded I got a message telling me they were already installed on my system.
My question is why does the "failure" notice remain on my history page and how can I delete those three file entries?
Thanks much,
Lee

Answer:History page notes they "failed" to load

Simplest way to reset WU history is stop for the moment Windows Update service and remove C:\Windows\SoftwareDistibution folder...

4 more replies
Relevance 89.79%

Vista Home Basic SP2. When I try to run Windows update all I get is a blank page that says "The page failed to load". I've looked all around and have found a lot of people with the same or a similar problem but no firm solutions. I haven't used it in maybe a week and it's worked fine up till now. There have been no real changes since I used it last. Does anyone have a clue?

Answer:Windows update "the page failed to load"

Originally Posted by drelectron


Does anyone have a clue?



Many possible explanations -wrong system settings,3p software,viruses...

Try advices from this link:You cannot install some updates or programs
reset IE Internet Explorer - Reset

Uninstall non-system firewall,antivirus,antispyware

Reset WU with "aggressive mode" How do I reset Windows Update components&#63;

Viruses also cancause this.Because scanning on allive system is not credible because many viruses can hide before antivirus I suggest use LiveCD with antivirus for example this one Dr.Web LiveCD is a software product that features a standard, Dr.Web scanner ,burn boot it and scan.
If nothing help find WindowsUpdate.log file in C:\Windows pack it and attache to post.

4 more replies
Relevance 89.79%

This error message pops upafter I log on to my Windows Xp laptop. What does it mean and how do I remove it?
 

More replies
Relevance 89.79%

I am getting the error "Failed to load resources from resource file. Please check your Setup" This happens every time I try to access a Word document. I am using Word 2003 from the Small business pkg.

I searched on their site and there was a download for those who use the Outlook business contact manager also, which I do. I downloaded the file, when to install it and it says it is already there.

I am running Windows 2000, this just started today and my updates are up to date.

Any ideas? I can ignore the warning and work, if I click OK or the X, it shuts down Word.

Thanks!
 

Answer:"Failed to load resources....." error in word

Try the Detect and Repair option from the Help menu. You will need to insert your Office disc when asked.
 

1 more replies
Relevance 89.79%

Trying to log into "Bitdefender" antivirus but it tells me I need Javascript which is already in my Chrome Browser. I checked Javascript in the browser and it had this error message "Failed to load resource: net::ERR_CACHE_MISS " What shall I do, uninstall it and reinstall?
 

Answer:Solved: Javascript error msg "failed to load"

Apparently it is a bug in chrome.
Source: http://craftcms.stackexchange.com/questions/5362/failed-to-load-resource-neterr-cache-miss
 

1 more replies
Relevance 89.38%

Hello,
I have bought a laptop model XPS 13 9350. It came with preinstalled Win10 Home Edition but i need Pro.
I get into the Windows Setup screen but at custom installation it doesnt see the drive or existing partitions and i get the message "We couldn't find any drives. To get a storage driver, click Load driver". I wasnt able to find such a driver and i have no instalation media.
In BIOS i have disabled "Secure Boot" and enabled "Legacy Option ROMs" in order to be able to boot from a USB stick since this model, being slim, dropped the CD/DvD drive bay. I have also tried to update it from Windows and introduce the new key ive got but i get the message it can't....
Any tips will be much apreciated.
Best regards,
Adrian

----------------------------------------------------------------------------------------------------------------------------------------
It was the sata configuration on raid to blame, switched to AHCI and it worked.

Answer:Win10 Installation: "We couldn't find any drives. To get a storage driver, click Load driver."

Thanks for your help. I had turned off Secure Boot but that wasn't enough.
Switching the SATA mode in setup to AHCI from RAID did the trick. Thank you so much

1 more replies
Relevance 89.38%

Hi I've got a DVR that I have (up until now) been able to access my recordings on using my PC (windows 7). The PC and the DVR are in the same room, along with the router. All I needed to do was enter the IP address of the DVR in to firefox/chrome etc and I had access to all my recordings. I could do this either via wi-fi or ethernet cable.

Now however for no reason, whenever I enter the IP address I get the error "connection failed". Why is this happening? So far I've tried the following with no success;
- Cleared the IP address from cookies and cache
- Created a new user on my Windows 7 PC and tried to access the IP address.
- Reset the DVR so it forgets the wi-fi settings and re-connected it to the wifi/ ethernet.
- Reset the DVR and router so that the end digit on the IP address changes.
- Used different browsers.
- Checked network and shared devices in control panel to see if the DVR is visible. It is there but I dont know which of the options (if any) I should troubleshoot. When I right click I get a MAC address, unique identifier and IP address. Theres nothing in there that can be changed.

I'm running out of solutions and I dont understand why suddenly the network/ DVR will not connect. Any ideas?
 

More replies
Relevance 89.38%

Hello,
I've started recieving random BSOD over the last couple of weeks. Usually "bugcod_usb_driver"
This always seems to hapen when I'm connected to the net thru my USB wireless modem

I'm a complete Ludite, but have tried to research this on the net which has suggested it's a driver problem.
I've un-installed my wireless modem and then re-installed (after downloading new software from supplier) - no difference.
I've then un-installed / re-installed all the USB ports but no difference.

Is anyone able to tell me how to read mini-dumps to see if they can tell me the actual error and how to fix?
Thanks in advance
 

Answer:Daily BSOD "bugcod_usb_driver" on XP SP 3

Both errors are 0xFE: BUGCODE_USB_DRIVER

One dump specifically cited the driver cmusbnet.sys which is part of Cmotech USB NDIS Miniport Driver by Cmotech Co., Ltd.

This company manufactures wire/wireless telecommunications and other appliances. The issue could very be not with your suystem itself but what is connected to your system via USB.
 

2 more replies
Relevance 89.38%

Just installed Avira antivirus and rebooted to complete the installation. I am getting the error "Boot selection failed because a required device is inaccessible" whenever I attempt to boot. I have tried using the Windows 7 disc to repair but it does not work as it runs for a few seconds then instructs me to reboot.

The hard drive was initially not appearing but luckily I can now access all my files from this OS, however I would really like to gain access to my main OS again. I have also reset the CMOS but it hasn't changed anything.

Any help would be very much appreciated. Thank you. Sorry if I posted this in the wrong section.

Answer:"Boot selection failed because a required device is inaccessible"

  
Quote: Originally Posted by Arfe


Just installed Avira antivirus and rebooted to complete the installation. I am getting the error "Boot selection failed because a required device is inaccessible" whenever I attempt to boot. I have tried using the Windows 7 disc to repair but it does not work as it runs for a few seconds then instructs me to reboot.

The hard drive was initially not appearing but luckily I can now access all my files from this OS, however I would really like to gain access to my main OS again. I have also reset the CMOS but it hasn't changed anything.

Any help would be very much appreciated. Thank you. Sorry if I posted this in the wrong section.


Um, remove Avira.

9 more replies
Relevance 89.38%

Hi. This my first time posting here, but I've visited these forums on several occasions in the past to solve various problems, so hopefully someone will be able to help with mine.

My parents and I moved into a new house on the 25th of April, and I got my desktop computer hooked up a few days later. When I started it up, it (re)installed a few drivers (the connected devices were my mouse, keyboard and HDTV that I also use as a monitor), and I was prompted to restart the computer to finish installing them. Because our internet connection wasn't set up until the 10th of May, I only used my desktop a few minutes a week to transfer pictures I'd saved on my laptop while visiting relatives. Ever since I hooked my desktop up in the new house, I've noticed that the "device failed to connect" sound randomly plays after automatically logging into Windows. I usually only need to start my computer up once a day, sometimes restarting to finish installing a program or update. The problem usually occurs once every four or five start-ups, and the sound only plays once each time.

When I started using my computer, I had some trouble double-clicking with my left mouse button for a few days or so, but it works fine now. I've tested the connection of all my devices, and they appear to be as tight as they can be. The Device Manager doesn't show any problems, except when I set it to show hidden devices, but I think that's because the mouse and keyboard I'm currently using aren't the same... Read more

Answer:"Device failed to connect" sound plays randomly

Hello ThisIsMadness91. Welcome to the forum.

There is not enough to go on there. There are some good clues though.
That "USBSTOR#DISK...." smells like a USB connected disk drive. Is there one connected? Was there one ever connected (at the old house)?

What would help is a complete description of the old and new setup - right down to the length of the cables used to connect devices to the PC. We are looking for any differences here.

You say you are using a new keyboard and mouse. It would be good to know what the old and new devices are (brand & model #). Were any of these installed with drivers? (keyboard driver or mouse driver).

9 more replies
Relevance 89.38%

I am unable to install iTunes on Windows 7 on a Dell Optiplex 780. It always errors out as "apple mobile device service failed to start" and then installation always rolls back. One result told me to remove all apple software on my computer, but I do not have any apple software installed, it always fails to install. a few websites mentioned to make sure that my iPod is not plugged into the computer when installing, I unplugged it, it made no difference. and there were websites telling me to just manually start the service, but every time I try I get a "unable to start service. the service did not respond to the start or control request in a timely fashion" which pops up immediately. I also tried doing an SFC /scannow but it says "there are no integrity violations"

I am at a loss here. I even tried various alternatives to iTunes which all give errors of their own

Any ideas?

Answer:"apple mobile device service failed to start"

Hello mate now I don't have a an answer but my partner has a very similar problem on her laptop - an annoying message t say that Apple Push has stopped.

It did get a little better by running these
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f and /r in the command line as per Option2 by better I mean it got less frequent.

To be honest I am not an Apple fan and it seems to me it clutters everything up

1 more replies
Relevance 89.38%

Hello,

Last night i was trying to update my AMD SATA AHCI Controller driver, but i shouldn't do while being sleepy....

My hand moved before my brain realised...I uninstalled the device BUT i also checked the option for deleting the drivers.

Now, i get the error while booting :






Quote:
0xc000000e

The boot selection failed because a required device is inaccessible


What i realise is that windows are trying to find the device needed to boot ( stored on boot info) , but device is not there.

Ι already searched the forum for similar problems and already tried to do a Startup Repair from Windows Installation Disc repair menu (3 consequent times as written), with no result.

No restore points either.

Is there any way to manually fix this or my only path is a repair install ? All my data are safely backed-up.

Thank you in advance for your help.
ΕDIT : I don't know if this is the proper subforum for the above problem, i posted here because it was caused by a driver uninstall. If mods/admins think it does not fit in this subforum please tell me.

Answer:Error 0xc000000e "Boot Selection failed- Required device Inaccessible"

Well, i found the solution after some 50-60 Google results reading...

Solution was found in this page.

Analytically :

I loaded Recovery Console from my Windows 7 Installation Disk.

Had the AMD SATA Driver folder copied to a cd from my second pc. Driver directory was "W764A"

Ran diskpart and list volume to check the cd's volume letter

Ran the following command ( D: is CD ROM, D:\W764A is Driver Directory, C: is Windows Installation ) :


Code:
D:\dism /Image:C:\ /Add-Driver /Driver:D:\W764A\ /Recurse
I typed exit to exit Recovery Console, rebooted and voila....Windows Started normally...

Glad it was solved....

2 more replies
Relevance 89.38%

my computer is put together from like a couple other computers but it runs internet and everything fine.
i just put a new graphics card in it but dont have the disk to install it.
when i have the card in the computer prior to turning on the computer the computer will turn on but nothing gets sent to the monitor unless the graphics card is out of the computer when i turn it on and put it in afterwards. the card gets power to it and everything but dont seem to be working.

if anyone can help me that would be super! i miss playing wow THANKS
 

Answer:WoW says "failed to find suitable display device exiting program" when I try to play

Hi

you answered your own question, you need the drivers for the card.
 

3 more replies
Relevance 88.97%

Hi,

On a fresh clean Windows 8 image, my software driver (signed) installs fine and shows up properly in the Device Manager. However once i uninstall it , subsequent reinstalls show up as 'Unknown Device' in the Device Manager.

From the device details, I find that it refers to /looks for the .inf file in c:\windows\inf folder but the file itself is missing from the location. The FileRepository has all the required files. But trying to update from there also fails.

Could anyone help me with troubleshooting this problem. What could be going wrong.

Thx,
Gita

Answer:Device manager shows "Unknown Device" on reinstallation of driver

Please fill your system specs to get help efficiently.
What is your computer make/model?

1 more replies
Relevance 88.97%

Hi,
Whenever the desktop appears I get the sound "dududu" with no popup.
Please help.

Answer:"Device Failed to Connect" sound notification

You mean you get the "device failed to connect" sound everytime you open the Desktop?

Right-click the Desktop, Personalize and go to Sounds, and set the Sound Scheme to Windows Default which is at the bottom of the drop down list and click, OK. Re-start the computer and see if the sound persists.

You may also type msconfig on the Start Menu. Go to Startup and check if any malicious programs are checked in there that might be causing this sound..

9 more replies
Relevance 88.97%

Hi, just got a new computer with windows 7. so i set up my new desktop computer and installed windows 7. then installed all my world of warcraft discs. but then when i tried to log in, it said "Failed to find Suitable Display Device". What do i do?

here is the system info:

Operating System: Windows 7 home Premium 64-bit ( 6.1, Build 7600 )

Language: English

System Manufacturer: To be Filled by O.E.M.

System Model: To be filled by O.E.M.

BIOS: Default system BIOS

Processor: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (2 CPUs), ~ 2.9GHz

Memory: 4096 MB RAM

Page File : 856MB used, 5658MB available

DirectX Version: DirextX 11

Device:

Name: Standard VGA Graphics Adapter

Manufacturer: (Standard Display Types)

Chip Type: 8 bit

Approx. Total Memory: n/a

Current Display Mode: 800 x 600 (32 bit) (1Hz)

Monitor: Generic PnP Monitor
Drivers:

Main Driver: vga

Version: 6.1.7600.16385

WHQL Logo'd : n/a

DDI Version: Unkown

Driver Model: Unkown
Any help please?
 

Answer:WoW "Failed to find Suitable display device"

15 more replies
Relevance 88.97%

Hi there! I hope you can help since I am clueless about this! I keep getting that error message "failed to initialize video device" when I try to play Mech3- pirates moon. I have no idea when the problem began or what caused it (ie deleted file or something). I updated my ATI Radeon 7200 last night to the latest version. I used to be able to play these games just fine.
I have win98 version , pentium III450 mhz, 385 mg, 4.30 gb free space. my cdrw is a philips 800 series. the weird thing about that is I can't find a single file for it! it seems to work fine thought since I uninstalled adaptec cd creator and re-installed it last night using it. I did print out a "system summary" and although I don't understand most of it, it does say that "could not find d3dhalf.dll" and "could not get information for "d3ddim.dll!" I hope all this helps you figure out what's goin on. thanx for any help you can provide.

monteine
 

Answer:{RESOLVED}"failed to initialize video device"

try reinstalling directx, those files are directx files
 

2 more replies
Relevance 88.97%

I just recently got a computer to work, hard drive crashed and i replaced it. I did everything myself with the little knowledge i have about computers and managed to get it right. I had thought i finished dealing with problems with this computer but now, after downloading WoW and waiting nearly 10 hours for the updates to finish.. It tells me "Failed to find suitable display device" seconds after hitting play. Someone please help?

My EVEREST report is attached.

Answer:"failed to find suitable display device" for WoW. Please help.

Looks like you don't have the video driver installed.

10 more replies
Relevance 88.97%

Hello, my xps 8500 has been showing "no boot device available" on start up. I understand this to be hard drive failiar but am hoping for a temp quick fix just to access and transfer files to a memory stick.
When enitialy starting up, raid volumes status is displayed as "disabled" and bootable No
But when pressing F1 at the "no boot device available" screen and it restartes, the raid volumes status reads "normal" but bootable remains No.
Running windows 8 and have cheacked that boot mode is UEFI and secure boot is disabled and such. Have also run the diagnostics using f12 and got error code 2000-0142.
Would appreciate any help, what I could try thanks.
Also if I were to buy a new hard drive, how would I install windows again, as I never received a copy on disk from dell.

Answer:"No boot device available" failed hard drive help

Buy and install a new hard drive and download the Create Media Tool to make your own windows installation disk.
support.microsoft.com/.../windows-create-installation-media

1 more replies
Relevance 88.97%

Hello, I hope I am posting this in the right thread. I have a Toshiba satellite laptop with windows xp. Recently, at startup I started receiving a message that says" One or more modules failed to load." "This process will be terminated." All of a sudden, most of my programs are not working correctly either. They won't open and each has their own message. For instance, Adobe Photoshop says they a registry file is missing, please reinstall. Another program says something about a runtime error. I can't even open my Norton anti virus software. This is so frustrating, does anyone know what could have happened and how I can fix this problem? My guess would be some sort of virus, but I really have no clue. Please help!! Thanks
 

Answer:message, "One or more modules failed to load"

7 more replies
Relevance 88.97%

I get the above error message whenever I right click on a drive, file or folder. The dll is not specified. Google search came up with two other pleas for help regarding this error, neither of which was apparently resolved.
Upon clicking OK, Windows XP Home lets me perform the task ; move, delete, rename, properties or whatever.

Can anyone help me get rid of this annoyance?
 

Answer:"fAILED TO LOAD RESOURCE DLL" error

whush, first welcome to MG. I had a long reply typed out earlier, but lost it somehow. Trying again. Go to Start--->Run. Type in SFC and then <enter>. You MUST have your Windows Operating system CD loaded for maximum results. SFC (System File Checker) will check out all files required to run Windows and ask for various answers (courses of action from you) to the problems it finds, Read and re-read the courses of action carefully. Answer "ignore" first time round, if you are not sure of the correct answer. Proceed slowly, with a clear head and no sources of interruption. This may clear your problem, but will certainly help in other areas, at least. Bazza

PS I use W98SE, not XP, so there may be slight differences. Baz

===





whush said:



I get the above error message whenever I right click on a drive, file or folder. The dll is not specified. Google search came up with two other pleas for help regarding this error, neither of which was apparently resolved.
Upon clicking OK, Windows XP Home lets me perform the task ; move, delete, rename, properties or whatever.

Can anyone help me get rid of this annoyance?Click to expand...


 

6 more replies
Relevance 88.97%

win 7
new error on reboots
" failed" what is a branding config and how do I get rid of it? please help---I am old and not too bright!!
 

More replies
Relevance 88.97%

I installed and uninstalled fruity loops (cause it wasnt working properly) and everything started going to shit. Im using XP Pro.

When i open internet explorer i get a "failed to load resource DLL" error message. When i click ok the program opens normally. This also happens when i right click on objects on my desktop.

I did a couple of virus scans and came up clean but when i tried to run auto update for norton it said i uninstalled it....which i didn't.

It also wouldn't let me play mp3s with windows media player, when i re-installed it it fixed that problem.

Anyone have any ideas what's causing this? Any help would be appreciated.
 

Answer:"failed to load resource DLL" error

Did fruit loops have a uninstaller?
.If so did you uninstall this way,
or did you uninstall through add/remove
 

8 more replies
Relevance 88.97%

Hey guys

this is a great and detailed tutorial and all worked as explained except to the last step...

I still can't get into my account, what sucks big time.

It looks like the password has been changed as the error message is not the same when I enter a wrong password.

It says some like "failed to load the user Profile" or to "failure to connect to the service to load the User" (it's in another language so I translate the best I can.

When I hit the OK button the login page will reload.

I ain't get the link to reset a new password in that process, that one I get only when I enter a wrong password. Anyhow, I don't have a password reset disc (unfortunately)

QUESTION

Can I use above tutorial and simply REMOVE any kind of password from keeping me out of my W7?

I can get till the last prompt where the tutorial shows to enter a new password, so maybe I can do this to get rid of the password too?

Would be awesoome

Thanks for Any Help whatsoever

Answer:"failed to load the user Profile"

Hello easycash, and welcome to Seven Forums.

For that error, you would want to use the tutorial below instead. Be sure to read all of it for all available options. You might give the system restore at boot option a try first.

User Profile Service failed the logon. User profile cannot be loaded.

Hope this helps,
Shawn

5 more replies
Relevance 88.97%

Hello people. I have joined this site hoping to get to help with the issues I have after updating from windows 8 to 8.1. I have been pulling my hair out because after loading this update it has screwed up my laptop.

Firstly after my laptop eventually starts I get the following error message

REGSVR32
The module "C:\ProgramData\ljleKtopg.dat" Faile to load
Make sure the binary is stored at the specified path, or debug it to check for problems with the binary oe dependent .DLL files.

The specified module could not be found

The other main problem is

Sometimes when surfing the screen will freeze and sometimes it will start again after about 10 seconds, or it will just stay frozen and I have to switch the laptop off, and then restart it. When I restart it I get the following message on the screen, Configuring windows update, 100% complete, do not turn off your computer. This will stay on the screen for an average of 35 minutes before it goes, and my laptop starts. This happens a couple of times a day and it's doing my head in because it was fine before I had to do the 8.1 update.

Any help would be appreciated.

Answer:"C:\ProgramData\ljleKtopg.dat" Failed to load

As for the dat file; I'll take a wild guess that this might be the residue of a malware that Windows Defender or your virus program cleared up.
The name of the file seems random generated (typical of malware) and the fact that it's in Program Data also smells a bit fishy.
Doesn't seem like a legit name of a file. Perhaps your upgrade cleared out whatever it was.
Check your startup items in the Registry and in Task Manager to see if there is something Windows is trying to start that doesn't seem legit. I am not one to shout "virus" or be dramatic about that, but you might just want to do a scan of your windows directory, Program Files folders and your Users directory.

CCCleanear and HiJackThis tells you if something has been messing with your settings - consider running those for this type of problem.

As for you problems with Windows update - either just hide that update and forget about it, alternatively run sfc /scannow from the command prompt to correct anything funny on your setup that might prvent the update from goingin.

Since these are quite different issues they probably belong in different threads, particularly if it ends up taking a while to get to the bottom of it.

This was the short response - if you are unsure how to do any of what I suggested, please google it, and if it's still not clear, then post back here.

1 more replies
Relevance 88.56%

Hi to anyone who is reading this.

My life is has suddently turned to hell as my computer is having those blue screens of death.When i install something/ burn i loose data and Dvd r's and sometimes its just like that.

When ever i do something it happens after 5 mins after logging on as admin.I mean its not exactyly but i am trying to say its not a quick reboot.Also in the BOD it does not specify any file names or anything there is technical info such as 0x245 well...i have not written it down but its like this.

Ive tried to find out which device driver is causing this problem by so many means.I had gone to device manager and found no yellow marks.Ive tried safe mode to see which area is causing problems.I have probably formatted my drive around 9 times to do everything so carefully some how till now no luck... ive goten white hair due tot thinking soo hard about what to do... you cannot imagine i cannot even sleep thinking that soemthing bad is gona happen when i work.

I have the latest service packs all updates and believe me when i say so that ive tried a lot.Microsofts error report says its caused by error report thats all THEY ARE OF NO help at all.I started having these after 4 months of purchase of this CPU.Everything is brand new from sound card to graphic card... welll at that time.

I have sound max driver for sound card.
Nvidia 66.93 verson of Nvidia driver graphics
interet driver i have 3com

These are the only drivers i have installed right n... Read more

Answer:Device Driver "Error" Please "Help"!

Have you installed the drivers off the cd that came with your motherboard? This board has onboard sound doesn't it? If you are using an add in sound card, pull it out and try the computer. Then pull the network card and try it. Does this board have on board network? I would pull all the pci cards except video and try it. Go to each cards web site and look for the latest driver for it. Reinstall them one at a time and try the computer. Put them in a different slot than the one it came out of to force windows to reinstall the driver. Is your heatsink secure on the cpu? Memory firmly seated in their slots? Video card firmly seated?
 

19 more replies
Relevance 88.56%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies