Computer Support Forum

Windows Update will not install updates!

Question: Windows Update will not install updates!

Hi. I'm new here and see a forum about windows updates not being installed. I have the same problem but that thread didn't help me at all to fix the problem.

I have tried to install Windows Installer but will get this message when I try to install it.. " Not enough storage is available to process this command."

I've tried these commands and the first one

regsvr32.exe c:\windows\system32\wuweb.dll says The module failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files.

There are 3 that will not update and haven't for a week. Yes I've been trying and searching that long!!!
#1 Security Update for Microsoft Office Visio Viewer 2007 (KB973709)
Error Code : 646

#2 Security Update for the 2007 Microsoft Office System (KB972581)
Error Code: 646

and

#3 Security Update for the 2007 Microsoft Office System (KB974234)
Error Code: 646

Any help will be appreciated and much thanks in advance!

Relevance 100%
Preferred Solution: Windows Update will not install updates!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Windows Update will not install updates!

Hi,

You mention:

" Not enough storage is available to process this command."

Have you actualy checked there is enough space on the drive, I am unsure how much space is needed, but this could be an issue.

Also make sure you dont have any external drives connected when running the update.

Does MS Update give you any KB numbers or error codes?

Thanks,
Danny

3 more replies
Relevance 67.65%

I recently (one week ago) made myself a dual-boot to Windows Vista SP2. I installed everything I needed and set the Windows updates to Automatically install updates. When I needed to make a video smaller (no need to talk about this in this thread) on Handbrake it said I needed Microsoft .NET Framework 4.0. I was surprised to see that. I went to see what Windows updates does and it wasn't checking for updates, as I set it to do. I started the check myself. I left it like that 30 minutes. When I closed my game, it was in the same state: checking for updates. So, I went to my .NET Framework 4 installer and, after 15 minutes, it gave an error: another installer is running. There were no installers, besides Windows update. So, I closed its process and let the installer run. After 15 minutes, it gave me an error (I don't remember the name of the error, I'll post it ASAP). So, I started researching, tried everything (MS FIXIT 50202, reset windows update history, reregister windows update components which gave me error 1060 and error 5 - error 5 is after trying MS FIXIT). I tried to "force" the .NET Framework 4 install by installing it step-by-step: 1.1  1.1 SP1  3.5  4. No succes. I AT LEAST need to install that .Net Framwork somehow. And the most interesting part is that my antivirus doesn't say that my OS is not up-to-date . SPECS: 6GB RAMAMD Athlon ll X4 750K 3.2-4.0 GHzAMD Radeon R7 240 4GB GDDR3

Answer:Windows update stuck at Checking for updates and can't install updates manually

Now it doesn't even give the error anymore. It just sits there and fake-installing .Net Framework.

14 more replies
Relevance 67.65%

As the title says, I have problems with Windows Update. I tried some fixes like: Reset_Reregister_Windows_Update_Components, Reset_Windows_Update_History, MicrosoftFixit50362 (which is a Microsoft Installer Fixer that couldn't install PowerShell), MicrosoftFixit50202. But what I really need is installing .NET Framework 4. I tried forcing it to install, installing it step by step, but it couldn't go further than .NET Framework 3.5. I need that Framework, the other updates don't really matter. And the interesting thing is that my antivirus doesn't say that Windows is not up-to-date, which is not normal, in ESET Smart Security, if Windows is not up-to-date.
If specs matter:
6 GB RAM
AMD Athlon ll X4 750K
AMD Radeon R7 240 4GB GDDR3
Vista SP2
 
 
cbs.txt:
http://www.mediafire.com/view/jsoeje0nxt30g5u/cbs.txt
 
I don't know how to obtain CheckSUR.log.

Answer:Windows Update stuck at Checking for Updates and can't install Updates manually

Hi antoniu200:
 
Many other Vista users have reported that Windows Update seems to get stuck at "Checking for updates..." for long periods of time, and this problem dates back to the August 2015 Patch Tuesday updates - see my screenshots in ScousaJAY's thread windows update just seems to hang while checking in the VistaForums. This month's December 2015 Patch Tuesday updates required a full hour on my machine before it finished the  "Checking for updates..." phase and finally presented a list of available updates, so you might want to try running a manual Windows Update and leaving your computer alone for an hour or so to see if it eventually runs to completion.
 
You might also want to read Nikilet's recent thread Updates were not configured correctly in that same forum.  Some Vista users, including myself, received an error message this month stating "Updates were not configured correctly. Reverting changes. Please do not turn off your computer" when they tried to install the December 2015 Patch Tuesday updates.  Six updates for the Vista OS and one cumulative update for IE9 were marked as "Failed" on my machine after Windows forced an automatic rollback and re-boot of my machine.  I re-ran Windows Update today and all Important updates that failed yesterday eventually installed successfully ("Checking for updates..." still took about one hour and I declined one Recommended update KB3112148 for Vista and one Optional update KB3106614 for Silver... Read more

7 more replies
Relevance 64.78%

Hello Everyone,

I did a clean install and on first use of Windows update the updates for some reason we're downloading and installing at a slow pace which I didn't recall in the past. Not sure if I'm having an issue on my end or not if it is on the side of Microsoft. Any fixes or solutions you might recommend I would appreciate it. Here is some nfo below.

Answer:After clean install, windows update slow to download install updates

I always keep the current cumulative update off line installer on hand and install it before going online. Also remember it is not just Windows updates you are also getting STORE updates in the background.

2 more replies
Relevance 63.96%

I haven't been able to install any updates since jan 11 of this year. I have been on the road for a few weeks and I tried to figure out the problem once I got back.

When a update is being installed it will stall we will say at 95%. I have looked in the log files and this is what I find.
From the Application Log;

Code:
Faulting application name: TrustedInstaller.exe, version: 6.1.7601.17514, time stamp: 0x4ce7989b
Faulting module name: wcp.dll, version: 6.1.7601.17592, time stamp: 0x4da00342
Exception code: 0x80000003
Fault offset: 0x00000000001d448a
Faulting process id: 0x3ec
Faulting application start time: 0x01ccf8bae7fccb80
Faulting application path: C:\Windows\servicing\TrustedInstaller.exe
Faulting module path: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\wcp.dll
Report Id: 3a7ff4f9-64ae-11e1-a405-002421577fd5
From the setup log;

Code:
Windows update "Update for Windows (KB2660075)" could not be installed because of error 2149842974 "" (Command line: ""C:\Windows\system32\wusa.exe"
"C:\Users\Les\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\KXQDWOEH\Windows6.1-KB2660075-x64.msu" ")
When I try to run sfc /now or verify only I get this error;

Code:
C:\Windows\system32>sfc /verifyonly
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 10% complete.
Win... Read more

Answer:Can't install updates using windows update or standalone update

Try running the System Updates Readiness Tool.

This is the link for the 64-bit version: Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details

This Microsoft article may help too: http://support.microsoft.com/ph/6527#tab0

9 more replies
Relevance 62.32%

I am running windows 10 64bit and it installs updates and does not install them, does not give me an error code it just says error under my previous updates.

Answer:Windows Update won't install updates

Hi,
First basics:
From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed- else do not proceed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

If clear:
Then try troubleshooting:
In cortana's search box type Trouble and click Troubleshooting
In the Control Panel GUI that opens, click Troubleshoot Windows Updates
Post back the result

If that doesn't help try
Tweaking.com's cautious repair tool (free).
Observe the cautious stages, select only the Windows Update repair and run it.
Test the result and post back.

1 more replies
Relevance 62.32%

Hi, I have a bunch of Windows 10 updates ready to be installed but for some reason they never install at all, so I'm wondering how can I get them through so I can download newer updates (if needed)?

Answer:Windows 10 won't install the updates nor update.

i had same problems, they passed by in few days just by waiting and waiting, i kept computer out of the sleep and at some point they installed itself. i use all the automations possible. what build youre on with? 10565? 10240?

6 more replies
Relevance 62.32%

I partitioned my hard drive and installed Windows 2k on the second partition in addition to WinXP. This caused the XP bootloader to get overwriten with the Win2000 bootloader. I did a restore with the XP disk, fixing that problem. Unfortunately, this rolled my .NET back to v1, which after a bit of dll trickery, I was able to get it back to v3. However, now Windows Update can't install updates! It will download them, but when it tries to install them it fails.

The only help I can get out of the program is "winupdate failed be because of a problem with your computer."

Any ideas guys?
 

Answer:Windows Update Can't Install Updates

cuallito said:


I did a restore with the XP disk...Click to expand...

Look here
 

2 more replies
Relevance 62.32%

My PC (running XP) doesn't seem to want to allow installation of 3 fairly recent Windows Updates (KB840374, KB828035 and KB824141). They appear to download ok - but all fail at the installation stage. I've tried to install them all several times without success.Any clues anyone ??Many ThanksMCPR82

Answer:Windows Update - 3 Updates won't Install

Check if they are in the add/remove programs applet. If so, remove then and reboot. Then try to install them one at a time: after the first, reboot and then go for the next. Do them in order of age.

9 more replies
Relevance 62.32%

I am running windows 10 64bit and it installs updates and does not install them, does not give me an error code it just says error under my previous updates.

More replies
Relevance 62.32%

Hey, was wonderin if anyone can give me a hand regarding this problem.

I try to go to windows update and get the newest updates, they will download but not install.
these are the following updates that did not install

Security Update for Windows XP (KB2544893)
Security Update for Windows XP (KB2535512)
Security Update for Windows XP (KB2536276)
Security Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x86 (KB2518864)
Security Update for Windows XP (KB2476490)
Security Update for Windows XP (KB2503665)
Security Update for Internet Explorer 8 for Windows XP (KB2544521)
Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2530548)
Security Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x86 (KB2478658)
Windows Malicious Software Removal Tool - June 2011 (KB890830)

Microsoft Office 2007
Update for Microsoft Office 2007 System (KB2539530)
Security Update for the 2007 Microsoft Office System (KB2541012)

Microsoft Visual Studio 2005
Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

Microsoft Visual Studio 2008
Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
--------------------------------------------------------------------------------

i tried going to http://support.microsoft.com/kb/943144>
and seeing if that helps but it didn't.

I looked at the other threads which suggested
Follow ... Read more

Answer:Windows update will not install updates for XP

7 more replies
Relevance 62.32%

I've been dealing with this for about two weeks. There was another thread on here dealing with the same topic (http://www.bleepingcomputer.com/forums/topic473547.html). I tried everything that was suggested in there, but none of it worked.

I'm running: Windows 7 Professional, 64 bit, Service Pack 1, 4 GB RAM, Intel Core i3 2.30 GHz.

This computer is about two months old. I'm at my wits end.

Answer:Windows Update - Updates Will Not Install

This link will take you to a article posted in the Answers.Microsoft which may be of help.

3 more replies
Relevance 62.32%

Hi Ive been having this problem for a while with windows update ever since i did the 8.1 update. It no longer installs the updates, it appears to download them and then gets stuck at this screen.

Does anyone know how to solve this so updates will install?

Answer:Windows Update Does Install Updates

It might be a bit tedious but try installing them one by one and see where it get's stuck. Jump over it and try that same one later.

6 more replies
Relevance 62.32%

I have a list of updates ready to be installed and I have tried but in the end it just stalls and doesn't do anything, so I'm here to ask what way around it is there to install them?

Turn off the updates (via the registry) and then on?

More replies
Relevance 61.91%

hi
today i performed the last update for my windows 8.1 pro 64bit
i did get any warning
but in my event i found this

even type Error
source Microsoft-Windows-WindowsUpdateClient






Installation error. It was not possible to install the following update, error 0x80246010: Weather.TheWeatherChannel.



and








Installation error. It was not possible to install the following update, error 0x80246010: Microsoft.BingTravel.




my windows 8.1 is legit ,thanks

i perform another check for new update -> no important updates availbe , lots of optional update
i clean this folder c:\Windows\SoftwareDistribution\Download\ too ,without luck

the w8.1 weather works ,don't know where is (and what is it) Microsoft.BingTravel
may somebody help me ?
does somebody has the same errors?
thanks

Answer:windows update error , can not install 2 updates

hi
i guess i fix it
Windows Store app -> Settings ->App updates -> check for updates

1 more replies
Relevance 61.91%

I tried to use windows update to install some updates for XP but every time I try to install the updates the installation fails. You have any idea of what the problem could be? I have a Dell Dimension 3000 PC,

Answer:Windows UPDATE Wont install UPDATES

Hello,

Do you already have SP3 installed? If so did you check out the link given by Irish Pilot?

Automatic Updates Failing To Install

Cheers,
Mak

1 more replies
Relevance 61.91%

Hi all,

Running Win 7 Home Premium (SP1) 64 bit.
I always downloaded and installed the Windows updates for my computer without problems. However, a few days ago, after I downloaded and installed 14 updates, my Windows Explorer started to act very odd: for example, I was not able to copy / paste the files using right click. Immediately, I used the restore point created before the updates => the Windows Explorer issue was solved and the computer seemed to return to normal.
But now, although the Windows Update screen shows the 14 updates as downloaded, when I click on "Install", the green indicator goes left and right for hours, but the installation doesn't happen.
I looked for solution online and I tried the following resources without success:

- FixIt tool: it gets stuck in the "Checking for Updates" screen.

- Run Malwarebytes, Lavasoft, Spybot: all clear.

- http://answers.microsoft.com/en-us/windows/forum/window... => I tried to apply the "Most Helpful Reply" (by miluethi) =>
1. Run services.msc
2. Stop service Windows-Update
3. Delete folder content of C:\Windows\SoftwareDistribution\
4. Start service Windows-Update again
5. Run Windows Update
I was not able to Stop the Windows Update service (I got the 1053 error)

- Run registry cleanup.

- Tried all the processes disabling Norton.

I will appreciate any help.
Thank you in advance,

Marsh

Answer:I can't install Windows updates after failed update

As a quick start Marsh TURN OFF your computer fully.
what registry cleaner did you use .

Roy

9 more replies
Relevance 61.91%

Hi - am hoping someone will be able to assist as I'm at my wits end!

For quite some time now my windows update returns an error when it tries to install updates. I have tried everything I can think of, including:

* Ensuring there are zero registry errors by using RegistryFix, version 5.5
* Running the usual spyware progs - spybot, ccleaner, etc. All clean, big thumbs up.
* Ensuring relevant registry entries have access defined to the SYSTEM user.

Microsoft told me that, basically, I couldn't have this issue as they'd not heard of it. But I do, I really do.

The following is a summary of the errors returned:

Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 1024
Date: 19/09/2006
Time: 13:14:23
User: TOBY-TABLET\Toby
Computer: TOBY-TABLET
Description:
Product: Microsoft Office Visio Professional 2003 - Update 'Visio 2003 Service Pack 2 (SP2): VISIOSP2' could not be installed. Error code 1603. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 39 31 35 31 30 34 30 {9151040

0008: 39 2d 36 30 30 30 2d 31 9-6000-1

0010: 31 44 33 2d 38 43 46 45 1D3-8CFE

0018: 2d 30 31 35 30 30 34 38 -0150048

0020:... Read more

Answer:Windows update unable to install updates

You might want to check out and research this Microsoft Newsgroup:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?query=MsiInstaller&dg=microsoft.public.windowsupdate&cat=en_US_2231886c-4c59-45b0-92e0-8881ddf5f40b&lang=en&cr=US&pt=1fb9885a-6840-48df-b845-31a5188de97a&catlist=18269d9b-486b-46eb-b15e-0796666fe81a&dglist=&ptlist=&exp=&sloc=en-us
This Newsgroup has helped me a lot in the past.
 

25 more replies
Relevance 61.91%

I am here because of the final reply I received to this post:

Windows update settings and other questions

I cannot get WU to behave properly. At one point it quit checking my machine for needed updates. I carefully reset it to the "Check for updates but let me choose whether to download and install them." and now when I shut down I am told "please wait for update 1 of 1 to install.

I ran SFC scannow and encountered no errors.

I will attempt to attach the CBS log zip file

Last night another update installed 'automatically.' This morning when I first booted I had great difficulty gaining control of my machine. I hit a black screen for a while. I can't recall all that I tried but eventually I got to a screen where I could shut down properly and when I rebooted the system ran 'normally.'

I would still like to be able to research an update before I install it, at least know what it might be doing.

thanks

baumgrenze

More replies
Relevance 61.91%

You know, the ones that have their own tab and aren't considered "important." Do you install them anyway? I never have and I'm wondering if I should.
 

Answer:Do you install optional Windows Update Updates?

Depends on what's listed there.
 

17 more replies
Relevance 61.91%

This laptop runs Vista home Premium 32-Bit SP2 (no mention of SPs in the installed program list so I imagine it was pre-installed).

Basically I noticed that there were 5 Important and 1 Optional Windows updates that would claim to install successfully, but never disappear from the list. Also they don't appear to Actually install at all as there's no sign of them in the Installed Updates list within Programs and Features (interestingly, other than Office, .Net and Works updates I don't see Any updates listed for Windows itself). There are no other noticeable problems with the computer.

Specifically the updates are:
Important:
Security Update for Windows Vista (KB2393802)
Security Update for Windows Vista (KB2676562)
Update for Windows Vista (KB2158563)
Update for Windows Vista (KB2679255)
Update for Windows Vista (KB971029)

Optional:
Windows Internet Explorer 9 for Windows Vista​
History:
- It did have malware but now does not: Malwarebytes, Superantispyware, Avast, TDSSKiller, gmer, and mbr.exe all show nothing beyond cookies.
- I noticed there was a found.000 folder in the root directory so I ran CHKDSK. It found free space marked as allocated, but shows 0 bad sectors & clusters.

Things I've done so far:
- Determined there is no Malware.
- Used CHKDSK to find the file structure is good
- Used SFC /SCANNOW followed by the findstr command on cbs.log to determine everything is fine (beyond that ini of the sidebar that alway... Read more

Answer:Windows Update MYSTERY - 6 Updates won't install!

Update:
- HDD passes the manufacturer's (Western Digital) diagnostics, under UBCD
- 10 passes with Memtest+ show no errors
 

15 more replies
Relevance 61.91%

Have dell xps 1530 with vista ultimate 32. Will not install updates. Had 27 which I had to install manually. One would not install out of the 27, security update for windows(KB981852).nable

They appear to install, then computer reboots, says it's configuring changes, after awhile it says reverting changes.

Note: The windows automatic update was working and installing updates up until 4 to 5 months ago.

Any help will be appreciated. Thx.

Answer:Windows automatic update won't install updates

Could you list the 27 Updates for me some Updates may cause Problems for other Updates

Also Welcome to Vista Forums

Many Thanks,
Josh

8 more replies
Relevance 61.91%

I've recently repaired my OS (yes, as in repaired in boot setup via the CD...) and now Windows Update doesn't seem to work anymore!

Automatic Updates or manual updates, it doesn't seem to make a difference, I have downloaded all the critical/high priority updates from Microsoft Update, but every time I try to install them, the message reads simply 'Some of the updates could not be installed' (ie: ALL of them! - see attached images)

I've scoured Microsoft Update for ANY form of help for this, to no avail, there is no apparent error code to reference! Microsoft Update worked fine, until I experiecned an error with 'Generic Host Process for Win32 Services' on shutdown last month, which was rectified by the repair...

Any thoughts?...
 

Answer:Windows Update will download updates, but not install them

13 more replies
Relevance 61.91%

I have had many update problems with windows update (including windows vista sp1) due to "Code 80070246." I have tried many things (not including reinstalling OS)...including
Stop error when you try to download updates from Windows Update on a computer that is running Windows Vista: "0x80070246"

However when i tried following those steps, i got to step 6 and the Windows AIK Command Prompt said it "cannot find the path specified." I'm pretty sure i have the same error as that one though, meaning a corrupted GlobalInstallOrder.xml file. I don't think it can find that file because I'm using a 64-bit system. Should i try doing the same thing as the microsoft site except replace Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990 with Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_63473ad082bcdac6 or do i have to do something else?

Maybe the problem isn't with GlobalInstallOrder.xml? I'm not really sure what to do.

I am running Windows Vista Home Premium x64, if it helps.
Any help would be greatly appreciated.

Answer:Windows Update Problems - Cannot install SP1 and various other updates

Hi Wasd and welcome to Vista forums

Maybe you could start to check/repair the integrity of your system files.
System Files - SFC Command

14 more replies
Relevance 61.91%

I have Dell Inspiron 3520
I just did a factory reset off of the built in factory partition.
I have been able to do all updates but 2 and I do not see the update for 8.1 KB 2919355 in the menu.
update KB 2920189 and KB 2770917 will not install.
when I install them they go thru the process when I restart to complete the install it
restarts says its configuring windows updates, then the message
"updates failed reverting changes do not turn off computer."

im trying to get this ready for my son to use for school and looking for a job. I would like to do the
8.1 update if possible.

on this link
https://support.microsoft.com/en-us/help/15288/windows-8-update-to-windows-8-1

i found this

Note
If the installation is interrupted for any reason, you can restart the update from where you left off by going back to the Store and downloading the update again.

To see the update to Windows 8.1 in the Store, your PC needs to have updates KB 2871389 and KB 2917499 installed.

Some editions of Windows 8 don?t support updating to Windows 8.1 from the Store, including Windows 8 Enterprise, Windows 8 Pro (if installed using volume licensing or activated using a Multiple Activation Key), and preview versions of Windows 8 or Windows 8.1.
Those listed updates in this note are not installed nor in the update list to install?
how can i tell if mine is a compatable version?
Please Help
 

More replies
Relevance 61.91%

Each day I got two definition updates. One for Windows Defender and the other one for Microsoft Security Essentials.

The one for Security Essentials installs without any problems, the one for Defender fails with error 8007007E.

Answer:Windows Update trying to install Defender updates despite using MSE

It sounds as if Defender isn't properly switched off.

Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Right-click on the saved file and select 'Run as Administrator', and tick all the options, then click on the Scan button - copy and paste the report to your response.

9 more replies
Relevance 61.91%

I am using self build PC with windows 7 Professional, SP1. It's always had a few gremlins, mostly to do with the windows installation, but I have increasingly been having issues with it which I am at my technical limits to resolve.

Currently, I have a number of windows updates which simply will not install.

KB2676562
KB2871997
KB28732339
KB2882822

I tried running the Windows Update troubleshooter - without success.
I tried a clean boot, having downloaded all 4 updates directly from Microsoft and installing. I thought that had fixed it, but lo and behold, the same 4 updates show as needing to be installed again.
Windows update readiness tool - just doesn't seem to complete the process. Starts, then stops and does nothing indefinitely.
At some point, and I can't even remember why now, after some digging online, I tried re installing the .NET framework about 5 times.
Again for a reason I can't now remember, I did a complete driver clean up on my Nvidia graphics card.
I created a bootable USB (my DVD drive is temperamental) to try and do an upgrade install. It won't allow me to, only a clean install.
I wanted to try and remove SP1 an re-install, but when I go to "installed updates", absolutely nothing shows.
I've buggered around with SFC iterations in the CMD prompt, without success.

I am loathed to do a clean install, but it is looking increasingly like that might be my only option unless someone can suggest someway to resolve this?

Nex... Read more

Answer:Windows 7 SP1 Update problems - updates won't install

Sometimes certain updates are dependant on others being installed. I would first try installing them individually. If you manage to get any to install, repeat the procedure and see if any of the others will then install singularly.

14 more replies
Relevance 61.91%

I'm having trouble installing updates in windows 8.1. I've identified through sfc /scannow that there is store file corruption however sfc is unable to fix them i tried doing the DISM restore health and it did nothing. Following the advice of site on from google i tried running this from admin command prompt 
 net stop wuauserv
cd %systemroot%\SoftwareDistribution
ren Download Download.old
net start wuauserv
net stop bits
net start bits
net stop cryptsvc
cd %systemroot%\system32
ren catroot2 catroot2old
net start cryptsvc
 
and re ran the the DISM /restorehealth and now the DISM is stuck at 40% for the past 3 hours. How do i fix this so my updates start working again?

Answer:Windows update keeps failing to install updates.

Any ideas?

1 more replies
Relevance 61.91%

Hi I'm running windows 7 Ultimate x64 bit OS and I installed this as an OEM product that I got from eBay. When I first installed the Windows back in March of this year, I could download and install all updates. But since then I can't download and/or install any updates which keeps me worried about my computer's overall condition that might get BSODs and other errors. I ran sfc scan and found no problems. I ran the windows update readiness tool, but it didn't install that update either!! I don't get any errors but I can send you the CBS logs that has text file because the other zipped files are very large files (around 12 MB each) that I can't upload in here. So I attached the CBS text file at the bottom. Please tell me how to fix this problem or connect me with remote network connection if you can so I can resolve this issue as it's very important that my computer can download and install updates, thank you.

More replies
Relevance 61.91%

Windows update doesn't seem to work I can get it to download the updates but it wont install the updates it just says update failed. You have any idea of what the problem might be? I have SP3

Answer:Windows Update Wont Install Updates?

Hello,

Automatic updates fail after installation of Windows XP SP3 | ITExperience.NET

Cheers,
Mak

1 more replies
Relevance 61.91%

Hey guys,
I am having this problem quite a long time now. Whenever I want to install updates from windows update in order to be able to upgrade from Windows 8 to 8.1, it shows me message while rebooting: Failure configuring Windows updates, Reverting changes, Do not turn off your computer. Then showing me couple of these multiple times:
and yes, you guessed it, I am once again where I started. I tried literally everything I found on the internet, and nothing ever worked. I just want to upgrade to Windows 8.1(which I can't aswell but I think the reason why, is Windows Update). My last chance is reinstalling Windows but I would like to solve this with different option. Thank you for any tips or anything that could eventually lead to solving this problem of mine.

Answer:Windows update fails to install updates

This is a BSOD problem. Please create a topic over there and include reports needed with your report.

1 more replies
Relevance 61.91%

I did a repair install of XP, and I thought that after that I would see tons of windows updates to install (because apparently the repair install reverts you?) But I checked windows updates and I don't see any - it says the windows is totally up to date. (Well, I did see a couple drivers, but nothing beyond that.)
 
Is this ok, or do I have to manually apply some updates or something? Computer properties says SP3 even though the xp cd I used for the repair install was an sp2 cd.
 
*confused*

Answer:After a repair install, is it ok if windows update has no updates?

Yes, Windows XP disks are confusing. The disks are so poorly worded and put together that many accidently press R and drop to console or do a destructive install when they wanted to do a non-destructive install. Recovery console is typically used to repair things that can't be fixed any other way such as fixmbr, fixboot, edit a config file, diskpart. However, in recovery console you can initiate a system restore from a restore point through the recovery console by using the command %systemroot%\system32\restore\rstrui.exe will repair the pc from an earlier date.
 
After pressing enter and pressing F8 for the agreement you get to the window you need to be on. From there is the big decision to do a destructive install or try a R for repair install, which generally should only reinstall windows OS and leave everything intact. If there isn't a R option on that page then the disk itself doesn't have that option or, the OS is completely destroyed and it can't even detect a windows OS installed. That might be due to a MBR corruption of some sort. Which is the reason to have a recovery console to try to repair issue's like that.
 
Sometimes the disk will complain that what's installed differs from the disk. Generally you want to use the same disk that was used to originally install the OS. You can sometimes get around this using a disk that matches the OS. Since it's a non-destrcutive reinstall in theory it shouldn't touch the sp2 or the sp3. It should only replace the cor... Read more

4 more replies
Relevance 61.91%

HI,
I'm running Win XP Professional SP 3 and Windows update continually tries to install the same 4 updates but as soon as they are installed and the system rebooted, update wants to install them again.

The updates are: Microsoft.net framework 3.5 sp1 and .net framework 2.0 sp2
 

Answer:Windows update tries to install same updates continuously

Hi

Try installing the main downloadable packages

.Net 3.5 SP1 HERE

.Net 2.0 SP2 HERE
 

1 more replies
Relevance 61.91%

Found something that worked. Removed folders related to updates in C:\windows\softwaredistribution . WU went off without a hitch. Don't see a way to remove the thread. You may delete/lock this if you wish. Thanks anyways.



Thanks for your time. For some time now, Vista (64-bit) has not been able to install two updates on my computer, specifically KB943899 and 943411. The two always fail. Other updates that appear will come along and install fine, leaving these two as fails everytime. The code in Window's Update is 800736CC. I click "Get Help" and see nothing helpful.

I moved onto trying stand alone updates and they fail as well. Once downloaded, I run them, and get "wusa.exe - Bad Image C:\Windows\system31\wuapi.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support" followed by "Installer encountered an error: 0x800700c1 %1 is not a valid Win32 application". This is the same error for both WUs.

Did a little looking around, haven't seen anything at seems to match my problem exaclty. Did see some people with the same error message under Windows XP who were asked to Run sfc /purgecache and sfc /scannow. Did both, sfc /scannow results in a few minutes of scanning then the window closes at 100% with no information, I assume it had no problems to report.

Thanks again for y... Read more

Answer:Windows Update unable to install two updates.

1) Go to your "Windows\SoftwareDistribution\Download" folder. You should see
a bunch of folders with random looking names

2) Look in each of these folders until you find one that has a .cab file
with a name that contains the update number that failed (i.e.
Windows6.0-KB929427-x86-EXPRESS.cab or something similar). If you can't find
the cab file there should be some other file in the folder that indicates its
number.

3) Backup then delete the entire folder (the one with the random looking
name) that contains that cab file

4) Repeat for each of the updates that are failing for you

5) You might have to reboot at this point but I didn't have to

6) Either wait for the updater to notify you or manually check for updates

7) The updates should be available for download again

8) Let the updater download and apply the previously failed updates and it
should work this time

1 more replies
Relevance 61.91%

I was given a Dell Vostro with Vista business 32 Bit. He said fix the d*nm thing it's your's...

I started with a clean install of the Dell OS disk with the above vista.

I installed Avira free, ZoneAlarm free, Anti-Spyware free.

I ran Windows Update, after configuring to download, install important, critical, optional etc. updates, automatically.

After one install that I had to click Accept agreement on, it found another
90, so I clicked install. It wouldn't. Gave me back, 8020002B and 80200053.

Ran from cmd: REGSVR32......\waupi.dll, wuaueng.dll, atl.dll, wucltui.dll, wups.dll, and all came back unloaded....

but, now I don't know what to do with that information.... I am asking this from my HP so I don't further add any other stuff to the Dell.

Please, I tried one other BB that a Gooogle search sent me to and have had no response for over a day..... 55 views, not a response one.

Don't know why I didn't come here first, This has been my home for a year, and just joined, am starting Malware classes, to come back and offer back...

Thanks for helping this old fart begionner....
 

Answer:Windows Update won't install 90 listed updates

Zonealarm is well known to interfere with Windows update. Try ditching it, and see if you have better luck.
 

5 more replies
Relevance 61.91%

Hi there,

Windows update keeps sending me reminders for updates I want to disregard, particularly "Windows Malicious Software Tool". Is there any way to tell the system once I un-check that particular update that I don't want it and don't desire to be prompted to download it all the time?

Cheers!

Answer:Windows Update keeps reminding me of updates I don't want to install?

All you need do is go to Windows Updates and right-click the update in question then choose Hide.

If you later decide you want to install the update just click 'Restore hidden updates'.

Windows Update - Hide or Restore Hidden Updates

3 more replies
Relevance 61.91%

my windows 7 pro system keeps telling me at shutdown that it has updates to install. on inspection, the same 2 updates, KB2882822 and KB3045999 are installing successfully to the tune of 11 times on 2882822 & 22 times 3045999!!!!! I can install these updates & check for updates and they come right back up again!

any ideas as to why this is happening?????

Answer:windows update keeps wanting to install the same two updates

Pleasefollow the WindowsUpdate Posting Instructions and postthe requested data

If thefile is too large (8MB compressed), remove the older CBSPersist cab files untilthe final file is below the limit - you can always post them separately afterzipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)

Pleasealso post the C:\Windows\windowsudpate.log file

2 more replies
Relevance 61.91%

I am running Windows 7 Home Premium SP1 32 bit.

Yesterday I tried installing the twelve important updates that had appeared for my computer. Nine installed and three got errors (KB2925418, KB2929733 & KB2929961, all failed with error code 80242016). I did the restart anyway and got the BSOD. The PC was recovered using the startup repair tool.

This morning WU still showed 12 updates to be done so I tried again. This time it installed 9 updates and ignored the other 3. The restart worked fine. WU now showed only three updates left. I tried installing KB2929733 & KB 2929961 again. No errors appeared until after the restart and I got the BSOD again. After several attempts the PC rebooted successfully using a previous restore point.

Now the installed updates shows a list of successful updates (and a long list of failed ones) but the successful ones still appear in the list to be installed. These are KB890830, KB2837594, KB2863818, KB2878225 & KB2878227).

SURT was run without errors as was sfc.

Any suggestions on how to get WU to match up its list of what needs to be installed with what is installed?

Attachment 310504

Attachment 310505

Answer:Windows Update Still Wants to Install Successful Updates

The SFC scan appears to have only partially completed - only 86 POQs were scanned, while the normal number is at least 120, for a 64-bit system.

This implies that there are registry problems - although CheckSUR found none.

Have you tried a System Restore back to before the system crashed?

9 more replies
Relevance 61.09%

I cant install windows updates anymore,when I try Error code 80040726 comes up.Can anyone help please?

Answer:Windows update problem. Updates wont install.

I assume this is a Vista machine but the error message doesn`t help. Can you check it and post back with the exact wording and tell us what is generating the message. (Windows Update?)

8 more replies
Relevance 61.09%

Hello

I am struggling to make my windows update run properly.
There are 3 important updates that I cant make it work, they are:
1- 2 of them concerning .NET framework 4 (KB2742595 and KB2789642)
2- Service Pack 1 (KB976932)

For the .NET framework 4 updates: windows actually do update them and says they are sucessfully updated, but when I check for updates again, they are still there. The SP1 is a little different, it does install normally, but when PC logs off to continue installation, it never goes through 14%. Then it restarts, says failure and it rolls back, aborting the update, so when I check windows updates again, if shows SP1 failure, error 0x80071a90.
I've tried many different things, like manual update, safe mode or clean startup config, none work.
Also, I downloaded SURT and installed it, but it seems nothing really happened.
Following Windows Update Posting Instructions
1- installed SURT, but seems nothing happened
2- SFC scan is normal; error-checking tool is also ok.
3- No errors appear on that screen. I will only find the error code for SP1 if I click on "View update history"
4- CBS.zip attached

Any help will be greatly appreciated.

EDIT = couldn't attach zip file because it's size is 20mb.

Answer:Windows Update - won't install SP1 and other updates- error 0x80071a90

I just found out that when I open 'msconfig' , there are many services stopped, including many microsoft ones. If I try to enable then and restart my PC, simply nothing happens, they keep stopped.

I tryed to manually start them through 'services.msc', some of them start to work, like 'Vaio Event Service' which enables my Fn key, but when I restart, every alteration made is undone ( I quickly notice this when I try to use Fn key in attempt to raise/lower the volume, after I restart).

I thought of virus/malware could possibly doing so, so I ran MSE,adwcleaner, spybot but the errors remain. Any suggestions please?

9 more replies
Relevance 61.09%

Hi

I am tired of having to repair Windows updates then get to install one or two then have to go through the whole process again.

Is there a site where updates can be downloaded according to their KB numbers then installed manually?

Thanks

Daniel

Answer:Manual update and install for Windows Updates files

Originally Posted by daniellouwrens


Is there a site where updates can be downloaded according to their KB numbers then installed manually?



Microsoft Update Catalog

2 more replies
Relevance 61.09%

Help!
I have created the Senslogn Registry, deleted SoftwareDistribution, Edb.log, Catroot2, Checked all services, Checked the Registry Key "NoWindowsUpdate" I have been spending hours trying to fix 0x80240020. I need to have someone tell me what the problem could be, I am an administrator running Windows XP Pro SP2

Answer:Help with 0x80240020 Windows Update fails to Install Updates

Please help.

3 more replies
Relevance 61.09%

I just downloaded 102 updates for Windows and Office it is approximately 600MB and above. After downloading, some updates maybe, 23 failed to install and 3 were said to be not needed. And I restarted my PC, after restarting, Windows Update prompts me to install the remaining updates which is not installed for the first time. Then It installs the 90% then restarts the machine, after restarting the remaining not installed updates installs successfully. What maybe the cause of that problem?

Sorry for the English. I'm Filipino

Answer:Windows Update fails to install updates for first time

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

1 more replies
Relevance 61.09%

Windows update stopped working after I restored the OS to the factory setup (using the built in one key recovery button). Windows appears to be working fine, but I cannot seem to install any updates (manually or through windows update).

Trying to install SP1 (for example) from the internet gives the error "Error_Install_Failure(0x80070643)".

Trying to update using windows update yields the following:
"To check for updates you must first install an update for windows update"
When I press "Install now", It tries to install this update, and comes back with the error "Windows could not search for new updates Code 80070643"

- I have tried using the Microsoft fixit related to this code, and the suggestions on the following two threads:

Update Error 80070643

Solved Windows Update Error 80070643


Any ideas as to how I might resolve this issue?
Thanks

Using a lenovo s10 netbook with Windows 7 starter 32bit

The only 3rd party programs I have installed since the reset are CCleaner, Mozilla Firefox and Avira.

Answer:Windows Update error 80070643 - Can not install updates

Windows Update error 80070643
and
Error codes
apply here.
Please follow the Windows Update Posting Instructions and post the requested data.

9 more replies
Relevance 61.09%

I have laptop running Windows 7 x86 Pro.

I am getting the error 800B0100 when trying to install necessary windows updates.

I just ran SFC /SCANNOW

I uploaded the CBS log in a zip on my Google Drive below.

Thank you so much in advanced for helping!!!


Code:
https://drive.google.com/open?id=0B6-pC3Bj_SXKRjJXTV9XdUpEQ1E
Here is the CheckSUR.log as well.



Code:
Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.22921_none_cc0a5bdc1cc83ba0.manifest
winsxs\manifests\x86_microsoft-windows-appid_31bf3856ad364e35_6.1.7601.22921_none_59cf35222991e5dd.manifest
winsxs\manifests\x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.22921_none_6eb386772b8dac3f.manifest
winsxs\manifests\x86_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.22921_none_aebdccd3909c3991.manifest
winsxs\manifests\x86_microsoft-windows-systemrestore-main_31bf3856ad364e35_6.1.7601.22921_none_4962f4be2aa99800.manifest
winsxs\manifests\x86_microsoft-windows-b..environment-windows_31bf3856ad364e35_6.1.7601.22921_none_6bbbbc01043537f0.manifest
winsxs\manifests\x86_microsoft-windows-codeintegrity_31bf3856ad364e35_6.1.7601.22921_none_a2fb16147c2a7e1d.manifest
winsxs\manifests\x86_microsoft-windows-b..vironment-os-loader_31bf3856ad364e35_6.1.7601.22921_none_5da9df08e4117a1f.manifest
winsxs\manifests\x86_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.22925_none_249d710ccca9d5f4.manifest
winsxs\manifests\x86_m... Read more

Answer:Windows Update ERROR 800B0100 while trying to install 7 updates

Hi kisd & welcome to sevenforums.

You need to grant file permission on your google drive account to allow us access to it.
Alternatively you can attach it to your post:

Click Manage Attachments
Click Browse
Choose file
Click Upload
post reply

I copied and pasted your code entry. I'll see how many of those I can find and get back with you. Will take some time. If I don't have all of them, NoelDP should be able to provide the missing files.

1 more replies
Relevance 61.09%

As said in the title, I have a computer with an issue, and that issue is that it cannot install any updates what so ever, even after re-installing Windows multiple times, even after applying a lot of fixes, it won't install any updates! It has run Windows update overnight for 2 days, nothing downloaded/installed either. It finds the updates, it lists them aswell, but Windows Update won't download them or anything. If you go to update history it will just say "Failed" on all updates.

Answer:Windows Update won't install updates even after multiple reinstalls

Hello Laith,

Sorry your having such a hard time with your issue.

Please, follow the Windows Update Posting Instructions, so we can better assist you.
Windows Update Posting Instructions

John

9 more replies
Relevance 61.09%

Just did a clean install of Win 7 SP1 and started windows update- but it just hangs there- with the green light going across the screen- i know this happened when I had win7 before i upgraded to 10. Did MS change the way they do this? In the past- when I would restart the computer it would say-Don't turn of your computer- windows is installing updates- What's going on?

Answer:Windows update not downloading updates- clean install Win 7

Try again, please.
 
What version of IE is installed?
 
Louis

9 more replies
Relevance 61.09%

I am attempting to install a fresh Windows 7 Professional SP1 x64 (Retail) virtual machine. When switching to Audit Mode to attempt to install drivers and updates before setting up the final users (the way I normally do), I find that Windows update gets stuck forever (apparently) at "Checking for Updates..." after the single update to the new Windows Update. I have also tried this without going through the Audit Mode on a separate fresh install, I had the exact same issue, so I do not believe that was the cause.

More replies
Relevance 61.09%

I keep getting the "NTVDM CPU has encountered and illegal instruction" every time windows update tries to run (wuauclt.exe) and updates won't install. This started after the new Windows UPdate Agent was installed around 6/14. No updates have installed since then, I just get the popup errors. I run several scans with Malwarebytes, Spybot, AVG and nothin was found. I ran the Fixit tool from MS and it indicated that there was a problem with windows update agent and the problem was fixed, but it still doesn't work. I'd love to reinstall windows update agent, but windows won't let me. Even the \wuforce command won't force a reinstall. Can anyone have any ideas?

Answer:updates won't install after windows update agent updated

Welcome to the forums blabay,

*Reset windows update settings by following this tutorial
Windows Update - Reset

*Uninstall Spybot & AVG replace with MSE do a full scan to get rid any virus
Microsoft Security Essentials - Free Antivirus for Windows

*Run SFC scannow 3 times Reboot if integrity violations are found
SFC /SCANNOW Command - System File Checker

Keep us posted for further suggestions.

9 more replies
Relevance 61.09%

Security Update for Microsoft Office 2003 (KB2687627) can be downloaded (WinXP) but won't install. The support.microsoft.com/kb/2722479 won't install either - error message is "the update cannot be applied"how to fix it?Have similar problem for other security other uodates

Answer:Cannot install Windows update KB2687627 and similar updates

Are you by any chance the same person who posted on this link using a different name?http://www.computing.net/answers/of...The first line is identical.Always pop back and let us know the outcome - thanks

6 more replies
Relevance 61.09%

Hi. Because I recently formatted my computer's hard drive, I have had to go online and redownload all of the critical and other windows updates for my Windows XP Pro computer. When I first started to download the updates, I had 19 Critical Updates to download. Now I think I have 10 or something like that. Well, these last 10 or whatever absolutely refuse to install! They are apparently downloaded though because I attempt to redownload them and they "download" at speeds way faster than what dialup is capable of. Well, then it proceeds to install the updates. However, every single update fails. During the attempted installation of these updates by Windows Update, my computer accesses the floppy drive for some unkown reason. It does this only once or twice. I believe that during these downloads I am running programs such as Norton Internet Security 2002 (but I don't know why this would affect it because my other downloads completed fine with this and the rest of the programs mentioned here running). I was also running Windows Messenger, Yahoo Messenger (I think), Kazaa Lite (I think), and Norton Antivirus 2002 (with Autoprotect enabled). I have not tried downloading these files with any of these programs disabled. Oh yeah, I use AOL for my Internet connection but I use Microsoft Internet Explorer 6.0 to do most if not all of my web browsing which does include Windows Update. Please help me with this problem! I am quite stumped really. I have tried multiple (5... Read more

Answer:Windows Update Fails to Install Critical Updates

9 more replies
Relevance 60.27%

I installed Windows 7 on a Vista laptop using a manufacturer disk.

After that it installed few updates, including SP1. Latest one was the update client (an older one, the kb ending in 810 I think) and searching for updates would take forever. So I installed the new client (ending in 812) and it found almost 200 updates.

Now I am starting to install these one by one, some of them I also hide.

I install one update, restart, Win7 starts searching for updates.
I hide one update, Win7 starts searching for updates.

Is this normal? Why does it start searching by itself after I install or hide an update?

More replies
Relevance 60.27%

i get the yellow sys icon saying "Updates are ready for your computer", so the install prompt comes up and just says "initializing installation..." in the status window for a few minutes, then afterwards say "Updates were unable to be sucessfully installed, the following was not installed: Security Update for Flash Player (KB923789)" it happens all the time even after restarting, it always comes up and is not sucessful. Any help???

xp sp2
 

Answer:windows update cant install flash player security updates

Hi Minus,
there are a lot of threads that deal with windows updates, which you can find by going to the Search button at the top of this page and when it opens, click on advanced, put in words like Windows Updates Microsoft and ask it to search the Software forum. Additionally, you may find more immediate help at:





Halo said:



http://support.microsoft.com/kb/822798Click to expand...

abri
 

2 more replies
Relevance 60.27%

Hello,

I'm having problems with Yahoo redirecting to adware sites. Have run AVG and Trend Micro Housecall scans with little or no results but am still having the issue. I'm trying to update Spybot and install AdAware but am getting errors when it tries to go through the install process. I'm also unable to install Windows Update updates; it comes up with error code 80072EFE.

For some reason I can't get RootRepeal to finish, but I've attached everything else.
DDS (Ver_09-07-30.01) - NTFSx86
Run by Josh and Steph at 20:45:46.74 on Fri 08/21/2009
Internet Explorer: 8.0.6001.18813 BrowserJavaVersion: 1.6.0_15
Microsoft? Windows Vista? Home Basic 6.0.6001.1.1252.1.1033.18.3006.1371 [GMT -7:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}
SP: AVG Anti-Virus Free *enabled* (Updated) {17DDD097-36FF-435F-9E1B-52D74245D6BF}
SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:&... Read more

Answer:Yahoo Redirecting and Unable to Install Windows Update Updates

Hello marvelusjd, Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.**********************Uninstall these old versions of Java, as they are malware magnets:Java™ 6 Update 3Java™ 6 Update 4Java™ 6 Update 5Java™ 6 Update 7Java™ SE Runtime Environment 6**********************Download and run RootRepeal Please download RootRepeal from the following location and save it to your desktop.Direct Download (Recommended)Primary MirrorSecondary MirrorSecondary MirrorSecondary MirrorZip Mirrors (Recommended if you have a slower connection or if the Direct Download mirror is down)
Primary MirrorSecondary MirrorSecondary MirrorUnzip the RootRepeal.zip file it to it's own folder. (If you did not use the "Direct Download" mirror to download RootRepeal).Close/Disable all other programs especially your security programs (anti-spyware, anti-virus, and firewall) Refer to this page, if you are unsure how.Physically disconnect your machine from the internet as your system will be unprotected.Double-click on RootRepeal.exe to run it. If you are using Vista, please right-click and run as Administrator...Click the tab at the bottom. Now press the button.A box will pop up, check the boxes beside All Seven options/scan area
Now click OK.Another box will open, check the boxes beside all the drives, eg : C:\, then click OK.The scan will take a little while to run, so let... Read more

2 more replies
Relevance 60.27%

Hi all,
I head to this section on advise by a Moderator from the Virus/trojan/Spyware Help section.
After cleaning the machine from a rootkit I have this issue:
I removed and then reinstalled SP3 (twice) and after downoading the updates now my pc prompts me to install updates that appear to be already in the system.
The last update haunting me is KB2633952 (before it was KB981793).
After every reboot I have the yellow update icon on the toolbar (down on the left, close to the clock). If start the installation procedure it ends telling me it is impossible to install. I tried to download it directly from Microsoft download center and the result is an installation error: "update cannot be installed as a newer or same timezone has already been installed on the System".
If I search the system I find the update in these directories:
1) C:\Windows\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
2) C:\Windows\SoftwareDistribution\Download\be9e26e54f7a2d73396715001d0e1e17\update
3) C:\Windows\SoftwareDistribution\Download.old\be9e26e54f7a2d73396715001d0e1e17\update
4)C:\Windows\Prefetch

Please note that the system now appears to be cleared from malware.

Answer:[SOLVED] Windows update prompting to install updates already installed

Go to Control Panel/Date and Time make sure that your computer is in the Right time zone for your area, and the check box for automatically update for Daylight Savings time is checked. Then go to the Internet Time tab and update your time to the current time. then you can try the Update again.

8 more replies
Relevance 60.27%

Hey Guys

I have a rather strange issue, when I run wushowhide under hide (option to hide the updates) updated it shows multiple updates for hardware that are available, however when I run windows updates these updates do not appear?
The only updates that appear are the usual windows ones?

Does anyone know how to fix this?

Help appreciated.

More replies
Relevance 60.27%

I had already installed, successfully I might add, a Definitions update for Microsoft Office 2010 (KB3115321). The Update already installed and now it keeps coming up with the same error unable to install update:
Definition Update for Microsoft Office 2010 (KB3115321) 32-Bit Edition - Error 0x80070643
I tried uninstalling the installed update and Windows won't do it returning an "Unspecified error" response. I have Windows 10 Home (32bit) installed and I cannot find a way to get Update, as you used to be able do, to HIDE the offending update. (THANKS Microsoft for removing functionality from Windows YET AGAIN).
I'm at my wits end with this. . I have asked about this problem before directly reporting the issue to Microsoft (Surprise surprise... NO RESPONSE. I'd get a better response from a brick wall). Seriously not happy; considering cutting my losses and reverting (AS I STILL HAVE MY INSTALL DISCS) to Windows 7 or moving to Linux. Way to go to p**s off users!

Answer:Windows Updates fail to install an already installed update error???

Problem solved. Used the Microsoft Show/Hide Updates Troubleshooter tool. Why did I have to go looking for this? This is a useful part of Windows functionality... What were they thinking of removing it. then hiding the tool? (Rhetorical questions; I know why. Thank you Nanny Microsoft, but I'm a better programmer than most of your shiftless lot)

1 more replies
Relevance 60.27%

I had already installed, successfully I might add, a Definitions update for Microsoft Office 2010 (KB3115321). The Update already installed and now it keeps coming up with the same error unable to install update:
Definition Update for Microsoft Office 2010 (KB3115321) 32-Bit Edition - Error 0x80070643
I tried uninstalling the installed update and Windows won't do it returning an "Unspecified error" response. I have Windows 10 Home (32bit) installed and I cannot find a way to get Update, as you used to be able do, to HIDE the offending update. (THANKS Microsoft for removing functionality from Windows YET AGAIN).
I'm at my wits end with this. . I have asked about this problem before directly reporting the issue to Microsoft (Surprise surprise... NO RESPONSE. I'd get a better response from a brick wall). Seriously not happy; considering cutting my losses and reverting (AS I STILL HAVE MY INSTALL DISCS) to Windows 7 or moving to Linux. Way to go to p**s off users!

More replies
Relevance 60.27%

Hi.

Th problem is that all windows updates are failed to install (around 27 updates) since the 17/May.
I tried everything from deleting temporary files, doing malware check, hard disk check for errors, still could not solve it.

Any ideas?

Answer:Windows update fails to install updates (Error 66A, 8007006E)

Troubleshoot common installation issues in Windows Update, Microsoft Update, and Windows Server Update Services would seem to apply here.
Run the Fixit, and see if it helps - make a detailed not of any errors produced along the way

9 more replies
Relevance 60.27%

I just did a fresh install on a new SSD for my laptop. I am getting above error. I reinstalled again and got the same. I ran check disk already. And I started SURT 7 hours ago but it is stuck on Initializing installatipn...

help...please...let me know if you need anymore info?

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-GB986-78RTG-GW262
Windows Product Key Hash: ArJ1lDfGuse+pNGJIavBAOoniJQ=
Windows Product ID: 00359-OEM-9824372-72693
Windows Product ID Type: 8
Windows License Type: COA SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {2D7A1FAE-E910-4580-9B03-9B13ABE403CE}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: ... Read more

Answer:Windows update error 800706BA Failing to install any updates

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

5 more replies
Relevance 60.27%

Greetings, new to the forum. I apologize in advance as I'm sure this topic has been posted before, but didn't find anything that addressed this formally...

So, the idea is that my company has a ton of desktops, connected to a domain, most of which do not have over 2gigs of RAM on them. When said desktops are booting up, Windows is checking for updates, utilizing as much as a gig and a half of said RAM, which is causing these machines to slow down to the point of being largely unusable. What I'd like to do is disable winupdate to automatically start up, then have user's run it themselves, maybe on a Friday before they leave or something. I want to set this up so there's as little for them to do as possible - many of them are not technological. In other words, windows would check for updates, install the updates, restart, etc. without any prompting from the user. Any suggestions as to how to best go about this?

Thanks in advance. Toffer.

Answer:Windows Update - Win 7 Ent x64 - create batch file to install updates

GPO is your friend - you should post your query to the TechNet forums, where there are many experts in GPO and WSUS.
https://social.technet.microsoft.com/Forums/en-US/home?forum=w7itproinstall

1 more replies
Relevance 60.27%

Hello,

So here is my problem, I reinstalled my windows 7 ultimate x64 using the fresh backup I did the day I bought my laptop.

So the installation was done without any issue and everything seems to be working fine apart of Windows Update. When I launch the update, Windows Update just keep looking for updates withtout finding nothing and then after a long time, it show an error msg, I got two different for the moment : 8024400a and 8024402F
I have attached the CBS logs if someone can have a look.

Thank you in advance.

More replies
Relevance 60.27%

About a month ago, I used the built-in Windows 10 recovery method to reinstall Windows 10. I still had a few glitches from my original Windows 7 installation, and these have been resolved by the reinstall.

One thing I've noticed, however, is that I'm getting an error message whenever I try to install the definition update for Windows Defender:

Definitie-update voor Windows Defender - KB2267602 (definitie 1.215.1024.0) - Fout 0x80070643

I already tried sfc /scannow, and it didn't find anything that required fixing. I also tried MicrosoftFixit.msi and NetFxRepairTool.exe, because Googling the error message brought me the news that it was related to the .NET framework.

To be clear: I don't use Windows Defender right now. I got Norton Security installed and it serves me well. I know some people consider it a resource hog, but I've tried Avira as a recommendation by Tom's Guide and it was even worse. My Norton still lasts over 200 days so I have plenty of time if I want to replace it by then. However, I do want Windows to be fully updated, and not having that update finished just stands out like a red ship in a sea of white.

I've considered that this error might be because of Norton, but I didn't have issues before resetting Windows, so I don't see why it would be Norton that suddenly throws a fit about it.

How do I fix this?

More replies
Relevance 60.27%

Hi,

I've been running XP on my machine for several years and the latest reinstall went very smoothly until I updated my bios. It may be unrelated to updating my bios but this seems to be the only change I had made at the time. It prevented a lot of applications from running, from Windows Live Messenger, to various games e.t.c.

I assumed it was to do with my bios, so I pulled the battery out of the motherboard (also shorted the 3 pin switch thing). This didn't seem to make any difference.

I recently installed Windows 7 (x86) on the same hard drive and partition, expecting this to cure the problem and start fresh, however Windows 7 seems to be having a similar problem in that I get errors on Windows Update (8007065E,800B0100 and 80070003). I've tried manually installing some of the failed updates too and just get a "failed" message.

This makes me assume that it's either still a problem with the bios, or perhaps with my hard drive.

Does anyone know of any software I can use to perhaps scan for issues with the hard drive, or with the bios?

Regards,
 

Answer:Solved: Windows Update won't install some updates (XP or Windows 7 on same machine)

Well, after trying all the fixes available on the internet for those particular error codes to no avail, I ran Kill Disk on the partition, re-installed Windows 7 and it appears to be running smoothly, with all service packs and updates installing fine
 

1 more replies
Relevance 59.86%

I have Windows 7 Home Premium 64 bit, I'm being unable to install the Service Pack 1 for some reason (KB976932). I already tried the System Update Readiness and here's a HUGE log that came up. Please, I'd appreciate any help you guys may give me.

Answer:Unable to install updates in windows 7 error 800B0100 update KB976932

I also used the Windows Update Troubleshooter v1.3 by HackSys Team, still not being able to install the updates. I'll appreciate any furher help for this.

9 more replies
Relevance 59.86%

Basically my old HDD died from bad sectors and I had to format and install Windows 7 Enterprise on a back up hdd that was flooded with useless documents from the past.

Went ahead done what I had to do and left Windows to check for updates, Steam install some games and League of Legends update.

However everything finished but Windows was still checking for updates and I noticed the svchost.exe (netsvcs one) uses about 1.5 GB out of 4 RAM. Immediately knew that this was caused by the Windows Update service that's under it.

However turning Windows Update off is never a smart thing to do and I don't have the kind of time to manually download updates.

I know that it will probably blast me with 200+ updates (has happened in the past but never used up so much RAM and finished way faster than 6 hours with all my usual post installation stuff.

Anyways some info you should probably know:
-I'm using a Wireless adapter (TP-LINK TL-WN722N) and I have read threads here that Windows Update would sometimes fail to do what it should with Wireless adapters, unfortunatelly that isn't an option at the moment.
-Resetting Windows Update manually and through Fix It doesn't work.

So first thing I'm looking at is updating the Windows Update client, please do tell if you think otherwise, or if not link me to the newest Windows update client or probbably any hotfixes that could fix the problem (never done this before and wouldn't want to mess up, so I decided to ask you guys )

An... Read more

Answer:Windows Update stuck on checking updates (on fresh and clean install)

Hi Qualtrox,
might be due to fact that Enterprise and Ultimate, are different versions.
If you using the Ultimate key on an Enterprise install, or visa versa, then it will hang as its failing validation.
We can check if you run this too, copy/paste the output
http://go.microsoft.com/fwlink/?LinkID=52012

Roy

6 more replies
Relevance 59.86%

I just installed Windows 7, installed the drivers from my Toshiba thread from yesterday, Installed AVG, and have been trying to get all the lasted updates since yesterday. So far I have none. I go to Control Panel and click Windows Update and I was presented with a red X saying check for updates for your computer and it sits and sits and sits, I shut down and tried several times. I performed a clean boot and still going on 6 hours with "Checking for updates" and with still nothing installed. even on a clean boot. I have been trying for a total of 12 hours now. All I managed to get is the System Update Readiness Tool installed. but no updates except one that was on the install media from 2010.

Answer:Clean Install of W7. Windows Update not working. "searching for updates" 6 hours

What is the speed of your internet connection?

11 more replies
Relevance 59.86%

Very troubling experiences lately. Can't download any Windows Updates, and I get a NSIS Error when trying to download any kind of software from the internet, from valid sites like Kaspersky, Bit Defender, or gaming sofware from legit companies. McAfee fails to Update new virus definitions. I don't know what to do. This is a 7 month old laptop. Windows 7 64 Bit. Here's the Hijack This Log


Code:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:06:43 AM, on 2/1/2013
Platform: Unknown Windows (WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Application\iusb3mon.exe
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\HPOSD.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPMSGSVC.exe
C:\Program Files (x86)\CyberLink\PowerDVD10\PDVD10Serv.exe
C:\Program Files (x86)\CyberLink\Shared files\brs.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\CyberLink\YouCam\YCMMirage.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_5_502_146_ActiveX.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE... Read more

Answer:Windows Update Fails To Install Updates, NSIS Error, Can't Download

  
Quote: Originally Posted by atmywitsend


Very troubling experiences lately. Can't download any Windows Updates, and I get a NSIS Error when trying to download any kind of software from the internet, from valid sites like Kaspersky, Bit Defender, or gaming sofware from legit companies. McAfee fails to Update new virus definitions. I don't know what to do. This is a 7 month old laptop. Windows 7 64 Bit. Here's the Hijack This Log


Code:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:06:43 AM, on 2/1/2013
Platform: Unknown Windows (WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Application\iusb3mon.exe
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\HPOSD.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPMSGSVC.exe
C:\Program Files (x86)\CyberLink\PowerDVD10\PDVD10Serv.exe
C:\Program Files (x86)\CyberLink\Shared files\brs.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\CyberLink\YouCam\YCMMirage.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_5_502_146_ActiveX.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explo... Read more

5 more replies
Relevance 59.86%

Just did a fresh install of Window XP. Went to Windows Update to get current and scan came back clean- nothing needed, not even sp2- NO WAY! I must need a ton of updates, patches, etc- how do I determine what I need in order to get current when MS's own scan says I don't need anything?

Any help would be appreciated!
thanks
WEBZ
 

Answer:Solved: Windows Update shows no updates needed on a fresh install of XP- no way!

16 more replies
Relevance 59.86%

Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates: Conexant - Audio Device - Conexant SmartAudio HD10.01.2014Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 201404.06.2014Should I install those updates or should I keep the original drivers?The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated: Conexant Audio Driver for 64-bit Windows 8.65.3.53 10/22/2013Integrated Graphics Driver for 64-bit WindowsWindows 8.1 (64-bit)9.17.10.2843 10/23/2012Intel Video Driver for 64-bit Windows10.18.10.3282 10/22/2013

Answer:Install optional driver updates from Windows Update for IdeaPad Yoga 13?

Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site. So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

1 more replies
Relevance 59.04%

Hello all,I have a T60p that I have just reinstalled windows XP on and I am having trouble with the ThinkVantage System Update software.  Every time I run it, it give me "System is up to date." and "No packages applicable to your system were found."  Now, I know that the system is indeed not up to date b/c I don't have most of the drivers (bluetooth/wireless/ect) and none of the nicer software (power management and such).  In the past when I would reinstall windows I could just start up the system update and it would install pretty much everything that I needed pretty quickly.  Just some other infos: windows is completely updated (XP SP3) and I also went ahead and updated the bios to 1.15 just to see if that would work but I am still having a problem.  If anyone has any ideas, I would be most appreciative.

More replies
Relevance 57.81%

1. I've been having problems with Windows Update for a while. I've spent hours going through forums attempting to solve my problem, but no luck. Whenever I reboot my computer, a Windows Update balloon pops up and says "Windows cannot install updates". When I try to search for updates, I get error 80080005: Windows encountered an unknown error. It may have something to do with the Background Intelligence Transfer Service...but when I try to Start the service (set on Automatic Delayed) it gives me error 87: parameters are incorrect. I've also had update problems with Windows Defender, but somehow yesterday I was able to manually install definition updates from the Microsoft website. 2. iTunes. I can't install updates to iTunes software. It always gets near the end, then says an error occurred. It attempts to install again, with the same result. The Apple forums say that the solution should be to download "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"... but that won't install either - I get this: "An error occurred during the instaallation of assembly 'Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "x86". Please refer to Help and Support for more information. HRESULT: 0x800736FD." Also, iTunes will not sync with AppleTV. I was have no problems until ab... Read more

Answer:Unable to install updates for Windows Update & Defender, iTunes, drivers; connection/port issues

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEnetsvcsmsconfigsafebootminimalsafebootnetworkactivexdrivers32%systemroot%�... Read more

2 more replies
Relevance 57.4%

Hello,

After viewing some great tech support on your forum today that looked like a similar problems I am having, I decided to join the site in hopes of getting the same help.

I went ahead and made a log1, log and info files via that .bat file mentioned in someone elses topic but I also read that I'm not suppose to post any of that until asked. Sooo... I'll wait. :0)

Problems? Well, Avast seems to have more more traces off the viruses I mentioned in the description however I am still unable to update any malware/spyware protection software in order to run it on this laptop; moreover I am unable to get to the windows update page to try to update the computer... the owner of this laptop said they received an update from windows about a month ago.

When I click on the windows update from my programs files, I get directed to google search instead. :0( Before running the avast(avg was installed before but stopped responding) I would get directed to a depression website when trying to type in microsoft.com

Pleaaaaaaaaaaassseee send help.

I'm on windows xp 2002 home edition service pack 3. Thank you

Answer:Windows updates shows google search instead, can't update any spyware,malware software, can't download/install programs...

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.

15 more replies
Relevance 56.17%

Hi
My dell inspiron , windows 10 version 1511, 64 bit , 4GB RAM, free space in C Drive 23 GB ,system has been running with an update issue for a long. I have raised the issue to the MS community. Please find the link My issue . 
Dell update for drivers update is showing your system is up to date. 
I have tried many things  as suggested by the MS community members but the issue is still there. Right now I am getting this error in the windows update page
• Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB4015219) - Error 0x8000fff

I have tried the following

1 As the auto update of the system failed continuously, to install the cumulative update for version 1511 I've  downloaded the  update from Microsoft update catalog. Failed to  update.

2. To install the anniversary update without installing the cumulative updates for version 1511 tried this one
Download windows10 through Media creation tool . Both the option of  Update now and ISO file has been tried.
In both the cases got the below error
3 Tried to install in clean boot mode. The same above error.

4. Tried to install in safe mode The same error,

5 Tried Troubleshooting , no success.

6. Tried to Reset windows update component and again check for update. Shows the error 0x8000fff.

Creators update is already released Is it possible for me to jump from version 1511 to  the latest version of windows 10 ? ( without... Read more

More replies
Relevance 56.17%

Hi everyone, I think I've got a fairly tricky problem here.
I just finished installing Windows 7 Pro (SP1 included) x64 on my laptop. Pretty much the first thing I did was go to check for updates. This was taking forever, and upon looking at the resource monitor, it appears that svchost (you can just which services
it's hosting) was hung at %50, or one CPU core. No HDD activity to speak of, just a process spinning its wheels.
I've tried multiple troubleshooting steps, from running the Update readiness tool (Which didn't find anything wrong), resetting windows update using multiple tools, running an SFC (which said the system was in perfect condition), and of course rebooting
several times in between.
Checking the CBS log file, there are many lines reading "Failed to internally open package. [HRESULT = 0x800F0805 - CBS_E_INVALID_PACKAGE]". Windows Update appears to soldier on past that however, where it apparently reads out its last cached package
(successfully it would seem) then stop dead. When I net stop wuauserv, the log seems to mention TrustedInstaller a few times, then that's about all the interesting information I can gather.
The WindowsUpdate.log file is not terribly helpful either; just before the hang it says "PT: Synchronizing extended update info", then it lists off a ServiceId and Server URL. Nothing after that!
Any help would be greatly appreciated!

More replies
Relevance 54.94%

I just installed Windows 7 Home Premium 64 bit on an HP Envy m6 laptop. I went to check for updates due to the fact that this laptop originally had Windows 8.1. Windows updates just keeping Checking for updates with the green progress bar keeps turning and
turning. I had this problem awhile back and there is an issue with two KB files which are windows update agents but I did not write them down. Does anybody have that information?
Thanking you in advance,
Dennis Sturgill

More replies
Relevance 54.94%

hi,
I noticed that when some Windows Updates arrive the list in "Select updates to install" is blank! See the attached screenshot. What to do?
After system restart the list comes back but after next Updates it vanished.
OS: Windows Vista Home Basic 32bit, SP1

Answer:blank list in "Select updates to install" Windows Update

Install SP2 standalone version and all hotfixes.If it don't help
observe your system for a while on clean boot How to perform a clean boot procedure to determine whether background programs are interfering with a game or a program that you currently use

3 more replies
Relevance 54.94%

Hi everyone,I'm using Windows 7 x64 (final RTM build). A few days ago I've started to have problems with the Windows Update control panel. It doesn't show me the description of the updates I've downloaded. It's very annoying!I've taken a screenshot so you can see it:screenshotAre there any hotfixes yet?Kind regards.

Answer:Windows Update "select updates to install" screen is blank

Hi. I had the same problem and contacted Microsoft for help.On a remote session they runned MicrosoftFixit50202 and the problem is for now solved.http://go.microsoft.com/?linkid=9665683Hope this help.

32 more replies
Relevance 54.94%

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

Answer:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

1 more replies
Relevance 54.94%

To whomever can help:

I was given a computer for my daughter. It was JUST installed with Windows 7 home Premium sp1 when we got it. When I have tried to check for updates, it gets stuck- even if I leave it for hours & hours, it still continues to "check for updates" (& I have very fast internet). I have ran microsofts windows update troubleshooter, but it still does the same thing. Please help.

Thank you for your time & assistance.


Dell Vostro A860
Windows 7 Home Premium (clean install) sp1

More replies
Relevance 54.94%

Hi,

I have a Windows 7 x64 machine that is permanently stuck trying to install the same update.
I have followed various posts off of MS websites to rename SoftareDistribution etc. but none have helped.
HAve tried
1. Boot intoClean Boot Mode and try updating again.
2. Run the Microsoft Fixit and see how it works.
  

   
How do I reset Windows Update components?

3. Try System Update Readiness tool by referring toWhat is the System Update Readiness Tool?.
4. Run
System File Checker tool and see how it works.

The WindowsUpdateClient log posts the error 0x80070bc9

CBS log has the following:
2012-09-22 15:09:44, Info                  CBS    Session: 30251211_3937697323 initialized by client WindowsUpdateAgent.
2012-09-22 15:10:49, Info                  CBS    Session: 30251212_293967167 initialized by client WindowsUpdateAgent.
2012-09-22 15:10:49, Info                  CBS    Appl: detect Parent, Package: WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256, Parent: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.0.6000.16386,
Disposition = Detect, VersionComp: EQ, ServiceComp: GE, BuildComp: GE, Distribut... Read more

Answer:Windows Update loops with a "Restart your computer to install important updates"

Thanks Alex
I had already tried the steps in the post you linked.
In the end I have had to reinstall Windows 7 over the top (keeping all settings) and this has fixed the issue with Windows Updates.
It is frustrating that I could not find a solution as I do not like glossing over the issues without first finding a solution but unfortunately it was not my pc and time was against me.
Thanks for all the replies.
Simon

9 more replies
Relevance 54.94%

Hello!
I bought a Dell XPS 15 (9550) with Windows 10 and so far everything have been good, except that I keep getting empty updates from the Dell Update-app. 
I have installed these empty updates ("0 updates are ready to install") many times but they never stop. 

Today, I got this message: "73 updates are ready to install", which got me a bit worried. 
What can I do? 

Answer:Dell Update - Empty updates "0 updates are ready to install"

I'd suggest you uninstall / reinstall Dell Update. Type Settings onto [Cortana] search box, click on Apps, and then uninstall Dell Update. To reinstall: expand Application in the link below, and then Dell Update.
Support for XPS 15 9550 | Drivers & downloads | Dell US

1 more replies
Relevance 53.71%

Hi,

Bought an IBM Thinkpad T-60 used. Took it to my tech who wiped the 60 gb hard drive and reinstalled XP Pro. Laptop worked great until I downloaded Windows SP3. After the install the machine will download updates but won't allow them to install.

I went to Lenovo's website and their updates won't install either. Nothing specific in FAQ's and support forums for my particular problem.

I came across one forum which said to rename CatRoot2 in my System32 folder to BadCAtRoot2 but even though I have administrative access the software would not allow the rename to take place.

Any suggestions before I return it to my tech for another wipe and reload? I'd like to noodle this on my own.

Thanks in advance for your help.

Answer:Win XP Pro, after SP3 update, new updates won't install

Welcome to TSF....

Try this from Microisoft:
There are a number of things that can break Windows Update in XP, including performing a repair/reinstall. Some are also having issues after installing Service Pack 3. For a quick fix, do this:

Open Notepad and copy/paste the following : Blue : text:

Regsvr32 wups2.dll /s
Regsvr32 licdll.dll /s
Regsvr32 regwizc.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 comcat.dll /s
regsvr32 shdoc401.dll /s
regsvr32 shdoc401.dll /i /s
regsvr32 asctrls.ocx /s
regsvr32 oleaut32.dll /s
regsvr32 shdocvw.dll /I /s
regsvr32 shdocvw.dll /s
regsvr32 browseui.dll /s
regsvr32 browseui.dll /I /s
regsvr32 msrating.dll /s
regsvr32 mlang.dll /s
regsvr32 hlink.dll /s
regsvr32 mshtmled.dll /s
regsvr32 urlmon.dll /s
regsvr32 plugin.ocx /s
regsvr32 sendmail.dll /s
regsvr32 scrobj.dll /s
regsvr32 mmefxe.ocx /s
regsvr32 corpol.dll /s
regsvr32 jscript.dll /s
regsvr32 msxml.dll /s
regsvr32 imgutil.dll /s
regsvr32 thumbvw.dll /s
regsvr32 cryptext.dll /s
regsvr32 rsabase.dll /s
regsvr32 inseng.dll /s
regsvr32 iesetup.dll /i /s
regsvr32 cryptdlg.dll /s
regsvr32 actxprxy.dll /s
regsvr32 dispex.dll /s
regsvr32 occache.dll /s
regsvr32 occache.dll /i /s
regsvr32 iepeers.dll /s
regsvr32 urlmon.dll /i /s
regsvr32 cdfview.dll /s
regsvr32 webcheck.dll /s
regsvr32 mobsync.dll /s
regsvr32 pngfilt.dll /s
regsvr32 licmgr10.dll /s
regsvr32 icmfilter.dll /s
regsvr32 hhctrl.ocx /s
regsvr32 inetcfg.dll /s
regsvr32 tdc.ocx /s... Read more

1 more replies
Relevance 53.71%

I am really flustrated with my T61P - a week ago it lost my user profile, so I installed a new hard drive and reloaded the OS (Vista Ultimate) from the recovery disks.  I have installed antivirus software, do all the MS updates, and then uninstalled all the ThinkAdvantage programs (except for Client Security).  Continuing to check for new Windows Updates works fine.  Then I installed ThinkAdvantage System Update - can still do Windows updates.  Run System Update, install 19 updates, reboot - Windows Updates no longer works!  I get the message "Windows Update cannot currently check for updates, because the service is not running/  You may need to restart your computer."  The service is running (I even restarted it from Admin tools).  Rebooting makes no difference.  I have reloaded the OS and updates about 6 times in the last week and always end up with this problem.  It does appear that since Windows Update was working before installing the Lenovo updates that there is a problem with the Lenovo updates. Help would be appreciated. David

Answer:T61P Vista SP2 no windows updates after Lenovo updates on fresh install

hey dfanslercurious to know which version of ThinkVantage System Update are you using ? Is it version 4.0.0046 ? If it isn't kindly download the latest version and install it.if it is, could you uninstall it. set msconfig to startup windows item only before reinstalling it.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

2 more replies
Relevance 53.3%

MS Defender updates from Windows Update in settings fail, other Updates successful, but MS Defender from Control panel can update the same definition updates without problems (why, oh, why? can't I just select and copy from settings? )



Over this time, I need to fix insider builds, but have a problem:

SFC and Dism component store health fix report no problems

Any Ideas?

Answer:MS Defender updates from Windows Update fail, other Updates successful

I seen your pic - it seems like MS wants us out of preview - no advanced options either..
Looks like we get to keep 10240 - just forget a clean re-installation of it - Key is blocked

2 more replies
Relevance 53.3%

I'm trying to add the latest updates on my Windows 8 (64-bit) laptop (Asus Q400A-BHI7N03) and the checking for updates... never completes. I've even tried leaving it over night with no success.
Any help would be greatly appreciated!

Answer:Windows Update never finds updates (Checking for updates never ends)

 try running the Windows Update Troubleshooter:
http://go.microsoft.com/?linkid=9830262"A programmer is just a tool which converts caffeine into code"

27 more replies
Relevance 53.3%

I am ready UPGRADE but when press OK continue,... after a while window disappears and license agreement never appears...well?
From Updates on Desktop i have choice install... proceed from updates or await reserve window reappear?
Only from control panel Updates of desktop can install w10pro...?

More replies
Relevance 53.3%

I am ready UPGRADE but when press OK continue,... after a while window disappears and license agreement never appears...well?
From Updates on Desktop i have choice install... proceed from updates or await reserve window reappear?
Only from control panel Updates of desktop can install w10pro...?

More replies
Relevance 53.3%

Suddenly Windows 7 has stopped installing Windows Updates. It downloads, then creates restore point, starts installation, but then comes back with the error code 800F0900. This happens with all the updates when carried out individually, critical or optional. I first went through the process of clearing all the Start-up Programs in the Services section of msconfig. As that did not solve it I then stopped all but MS services, and that did not solve it.  I tried the Microsoft .NET Setup Verification Tool. This said there were problems that it could not fix and sent a report to Microsoft.  Following an earlier thread on this site, I installed and used the Windows Repair program from Tweeking.com. This failed to solve the problem. Does any one have any other possible advice to help solve this problem ?

Answer:Windows Updates will not install. Error code 800F0900 for all updates.

I would try running the System Update Readiness Tool:  http://www.microsoft.com/en-us/download/details.aspx?id=20858 .
 
Louis

3 more replies
Relevance 53.3%

Hello!

My test computer (specs follow) is stuck at build 10586.11 I cannot install any cumulative upgrade, they all fail and Windows Update undoes any change to the system. In order to be able to install any other update I have to use the show/hide tool to hide the cumulative updates. I don't know what's wrong. My main computer (see my specs) and several of my friends have no problem upgrading up to 10586.36, but this particular one fails for some reason. I already tried to disable some devices in Device Manager and disable some services and startup applications, nothing worked. So I decided to start this thread and include a log taken by the forum tool in case someone can shed some light to the issue and tell me what to do.

Thank you in advance.

Specs of my test computer that has the issue:

Computer: Custom-build server system
Motherboard: Supermicro PDSG4 (Intel socket 775)
Chipset: Intel Glenwood 955X (supports up to Pentium D dual-core CPU socket 775, not newer models)
CPU: Intel Pentium D 945 3.40GHz dual-core socket 775
RAM: 4GB DDR2 667MHz (4x 1GB modules in dual channel mode)
Graphics: XFX GeForce 7300GS
SATA Controller: Intel ICH7R with RAID support
SCSI Controllers: Adaptec 7901 Single channel Ultra 320 SCSI & Adaptec SCSI RAID 20105/Supermicro AOC-LPZCR supported
LAN: Intel 82573V PCI-E Gigabit Ethernet Controller
Audio: Realtek AC'97 audio high quality 6-channel sound
OS: Windows 10 Pro TH2 build 10586.11 32-bit English US

PS: Before you ask, I have alrea... Read more

Answer:Cannot install any cumulative update, other updates OK

Hi spapakons,

Please remove every crack/bypass on your system in order to proceed.
There are 2 main reasons,
1.




Troubleshooting a system with counterfeit programs is useless as it is not known what has been modified to your system.
A counterfeit program contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.



2.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

8 more replies
Relevance 53.3%

Hello!

My test computer (specs follow) is stuck at build 10586.11 I cannot install any cumulative upgrade, they all fail and Windows Update undoes any change to the system. In order to be able to install any other update I have to use the show/hide tool to hide the cumulative updates. I don't know what's wrong. My main computer (see my specs) and several of my friends have no problem upgrading up to 10586.36, but this particular one fails for some reason. I already tried to disable some devices in Device Manager and disable some services and startup applications, nothing worked. So I decided to start this thread and include a log taken by the forum tool in case someone can shed some light to the issue and tell me what to do.

Thank you in advance.

Specs of my test computer that has the issue:

Computer: Custom-build server system
Motherboard: Supermicro PDSG4 (Intel socket 775)
Chipset: Intel Glenwood 955X (supports up to Pentium D dual-core CPU socket 775, not newer models)
CPU: Intel Pentium D 945 3.40GHz dual-core socket 775
RAM: 4GB DDR2 667MHz (4x 1GB modules in dual channel mode)
Graphics: XFX GeForce 7300GS
SATA Controller: Intel ICH7R with RAID support
SCSI Controllers: Adaptec 7901 Single channel Ultra 320 SCSI & Adaptec SCSI RAID 20105/Supermicro AOC-LPZCR supported
LAN: Intel 82573V PCI-E Gigabit Ethernet Controller
Audio: Realtek AC'97 audio high quality 6-channel sound
OS: Windows 10 Pro TH2 build 10586.11 32-bit English US

PS: Before you ask, I have alrea... Read more

Answer:Cannot install any cumulative update, other updates OK

Hi spapakons,

Please remove every crack/bypass on your system in order to proceed.
There are 2 main reasons,
1.




Troubleshooting a system with counterfeit programs is useless as it is not known what has been modified to your system.
A counterfeit program contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.



2.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

0 more replies