Computer Support Forum

colour is all messed up!! HELP :)

Question: colour is all messed up!! HELP :)

This is a new computer (3wks old) Acer Aspire X1700,currently running Windows Vista. 3 days ago we noticed a bright blue speckly haze creeping into all of the blalck that was on our screen,whatever site we visited and also on the desktop. It now dominates everything black and the other colours especially noticeable on red,have gone very dull. Someone suggested the graphics card? Any help would be much appreciated!! It is not getting any worse but is there constantly and is very annoying. I was wondering if it was something fixable from home rather than unplugging everything and lugging it back to the shop Thanks!!

Relevance 100%
Preferred Solution: colour is all messed up!! HELP :)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: colour is all messed up!! HELP :)

I'd take it back and demand a new one

2 more replies
Relevance 57.81%
Answer:HELP, no sound, colour all messed up, no MM funct

HELP guys.I had to reinstall windows after a major crash.Now installed windows 98, after wiping disk clean and formatting, had millenium but i thought that was erm... not good.Anyway I didnt have millenium disks cos the Pc is second hand.I now have the following problems,1) No sound at all from internal speaker or external speakers.2) Colour is only running on 16 colours. used to be 32 bit true colour.3) Hard drive is now only 1.99GB was 9GB. I ahve not yet set up FAT 32 system. ? did i do something wrong when i formatted?4) I have 3 devices with a yellow query mark,a) PCI Ethernet controllerb) PCI Multimedia audio devicec) an unknown device?5) Since the change the graphics controller has changer, it is an Intel 82810E graphics controller 4.12.01.2604 but shows as a PCI standard controller.6) I think I may have missing driversfor a) Intel 82801AA Bus Master IDE controllerb) Intel 82801AA USB universal host controllerc) AC'97 Driver for Intel 82801AA controllerLNE 100TX fast ethernet adaptor v.1Im really strggling to get my system back in full working order so any help would be appreciated.Is there a tool out there which would identify missing drivers?Thanks guys.Mike

10 more replies
Relevance 56.17%

Hello

I've had my laptop for over a year now, and this issue just arose. The colour settings on Intel control panel seem to have changed. However, when I set it back to 'default' it's super bright, and almost impossible to read text.

Could someone who is running Windows 8, and has Intel Control Panel tell me what settings they have (under display -> Colour enhancement)?
The settings I'm currently using are as close as I could get to the original (in terms of colour) [Pic 1]

I can't show you what it looks like, because screenshots just display the screens as normal looking, and if I use a camera, the pictures will appear too bright/dim anyway.

Why are the default settings on Intel so bright?
 

Answer:Solved: Intel Control Panel colour settings messed up

7 more replies
Relevance 51.25%

Hey there.

So I'm having a problem playing .wmv files on my system (it's not just WMP). Everytime I play a file with a .wmv extension, the file will play, with proper audio and everything, but the colour will be messed up, almost as if the player (could be WMP, Realplayer, Quicktime etc...) is playing in negative mode. I can't fix it even with codecs. I've downloaded numerous codec packs, codecs from Microsoft, third parties, everywhere, and I can't seem to fix it. This only happens with wmv files, mpg, avi, mpeg etc...all play perfectly.

Running XP Pro

Thanks in advance
 

Answer:Windows Media Play wont properly play.wmv files, colour is messed

8 more replies
Relevance 45.51%

Can anyone suggest a way to get the Microsoft Solitaire Collection colours back. Yesterday, all colour went and the cards just showed in yellow on a black ground. Asked Microsoft, but no help given. Am I the only person with this problem, or has someone
solved it?
Updated drivers for  Nvidia Graphics card.  Reset the Collection under 'Features' in Settings.
Nothing works yet.  Any ideas, anybody?

More replies
Relevance 45.51%

Hi there gurus.
My pc doesn?t show certain colour objects in Publisher 2007 and some on-line sites. Overall, the screen colour is very good. I know the fault is localised, because when I switch to Print Preview in Publisher it looks fine and I can see all the object colours. (I only lose the colour with objects, not text)
Also, when I send a copy of a Publisher page to my partner who is on the same PC, it looks fine on her screen.
I?ve tried going to Install/uninstall programs and run the Repair, but to no avail. The guys in my computer shop are clueless without seeing it. Anyone who can help solve this for me is a gem.
Cheers!
David

More replies
Relevance 45.51%

System 7 an elderly Epson scanner Dell colour laser
Copying a black document results in blue prints.which is getting it wrong-system ,scanner or printer?

Answer:W7_stand alone scanner colour laser prints docs in wrong colour

I had the same thing happen although it was an inkjet not a lazer. Re-installing the software fixed it in my case.

4 more replies
Relevance 45.1%

What's cheaper: colour laser with genuine ink or colour inkjet with compatible inks?

I'm happy to invest in buying a colour laser: but I can't find any refills for lasers
At least they don't seem to be widely available

So, my choice is: colour laser + genuine inks or colour inkjet + compatible inks

From what I know, side by side: laser's are cheaper
But, how about when compared to genuine laser ink to compatible colour inkjet inks?

I should stress that for me needs, I am not overly concerned if using compatibles doesn't give me perfect results - just close as possible is fine for me

What's more important probably is speed of print at highest quality

ANY feedback would be great

Thanks
OM
 

Answer:What's cheaper: colour laser with genuine ink or colour inkjet with ink compatibles?

Finding Compatible Remanufactured Color Toner cartridges can be dicey. While they may be available, the problem may end up being the company tht does the remanufaturing. It is also dependant upon the model printer you get. I have noticed that the savings on my Black Canon X-25 toner cartridge is only about $12 lower than the cost of a Factory original cartridge. There are sites that I would save up to $30 per cartridge, but part of this is eaten up by the shipping charges. For my toner cartridge, I am about 1/2 mile from the store that does nothing but ink and toner refill services, and their garauntee thier cartridges 100%. In 3 years I have only had to return one cartridge and it was an HP #17 Color cartridge.

Now per page printing cost on a laser is much cheaper than on an inkjet. Though the printer cost itself is usually much higher for a Laser. Personally I use the laser much more than than my Inkjet, but I do use the inkjet for all color printing. But then 95% of my printing is monochrome text.
 

1 more replies
Relevance 44.69%

Hi, I'm using the Aerolite theme with Aeroglass, and want a consistent colour for the borders. So I set accent colour from background 'off' and choose the colour. Fine so far.

Now that's ok if I log off and on.

But if I sleep or hibernate (not personally ) and then resume, the colour and setting are lost.

I noticed that on resuming, the border colour is present until the 'Please wait' screen appears, after which these settings are lost.

Any ideas? Thanks!

More replies
Relevance 43.87%

Hello friends,
I was just thinking that wouldn't it be great if we get more color options to change the background color on our Windows Phone devices than just black or white as we get on Windows 8.1 devices to customize background color along with tile colour?
Reply your views !

Answer:More colour options to change background colour

I personally like the black and white, but I saw a mockup of a dim tropical photo in place of the black and it looked quite beautiful.

3 more replies
Relevance 43.87%

Help please...I do cartoons in Photoshop for magazines...how can I adjust my screen, so that what I see on the screen will match what is printed in my client's magazine? Thanks.click here

Answer:Screen colour to match magazine colour?

I found the easiest way to achieve this was to print the picture and then adjust my screen to match. Once you've adjusted the screen all future pictures which look too light or dark, on screen, can be adjusted to suit within your software.

8 more replies
Relevance 43.87%

Hello.

I seriously need help with my PC. I've reinstalled Windows XP and Service Pack 2, and I can't chnge the Screen resolution or the colour quality. It sucks. The resolution stays at 800x600, the lowest possible, and the colour quality stays at 8 bit. I think I have a ATI 128 MB DDR Radeon 9800 Pro. I dunno whether thats a driver or what. And I also don't know my graphics card, or whether that will help at all.

I would swear at this point but I'm too young.

Oh but I'll use this instead

Has anyone got any help for me that I can understand. I'm 14 but I still can understand most computer talk.

Anyway thanks very much for reading all this crap and please try not to point out all my spelling mistakes.

Alex Jordan

Answer:[resolved]Help with resolution and colour and colour quality??.. anyone??

Heya, welcome to the forums


Okay, it has to do with your drivers. Go to ATI's website and find your driver.

Here's the link

http://ati.amd.com/support/drivers/xp/radeonx-xp.html

Please download and install both the Control Center as well as the Display driver. Then restart your computer and try to change the resolution.

Cheers!
-Facade

16 more replies
Relevance 43.87%

Hi Allhope someone more knowledgable can advise - I recently purchased a Lexmark x500n multifunction colour laser printer - I had a big black print job to do excel and word - 2000 pages - i was shocked to see that - ok the black starter cartridge of 2500 pages was nearly empty- fair enough - but all three colour cartridges (1500 page size) were nearly all empty too - I hadn't done any colour printing but when i contacted the manuf they advised that the printer uses colour also to print black!! - it's getting returned to them - but do do all colour lasers do this - obviously this quadruples the costs of printing and has put my costing out of the window!! - any advice would be great - it's a network colour printer, with copier and scanner that I need - a fax would be great but not essential.thanks in advanceTrifly

Answer:COLOUR LASER - PRINTING BLACK USING COLOUR!!

That would pee me off no end. How in God's name can it use colour to create black when there's a black cartridge in there? A cheapo mono laser seems to be your ideal tool. I know nothing about colour laser printers, but is there an option anywhere in the settings to print using only the black cartridge? Does the printer still work if you take out the colour cartridge while printing only black text documents?

4 more replies
Relevance 42.23%

I have found out that the wrong driver was installed. I have installed the right one but although it now prints OK in Black I am not getting any colour.I have looked at the properties and the colour box is ticked. The printer does not indicate a lack of colour ink.Can anyone help please?

Answer:No colour from Epsom 740 Colour printer

How long since it printed colour. Why is it you are just having to sort the drivers

10 more replies
Relevance 42.23%

I have found out that the wrong driver was installed. I have installed the right one but although it now prints OK in Black I am not getting any colour.I have looked at the properties and the colour box is ticked. The printer does not indicate a lack of colour ink.Can anyone help please?

Answer:No colour from Epsom 740 Colour printer

has it got new carts in it , and have you taken the protective tabs off of the bottom of the cartridge.not making anybody look stupid but it does happen

2 more replies
Relevance 40.59%

I recently got SP2 for XP Pro, and it screwed up my comp horribly. After installing XP Pro (from XP Home) all settings and everything were destroyed. However, when placing some icons back on the desktop, they became jumbled. I stopped putting things on the start menu and desktop until I can get this fixed. Thanks. (I had a few other errors as well. IE and OE were missing, and 2 DLLs were gone. Those I have fixed though.)

Answer:[resolved] My icons are all messed up (not disorganized, the image is messed up)

Try downloading TweakUI from here on the Microsoft Website. There is a function inside it which will repair your icons. See if this helps.

3 more replies
Relevance 40.59%

My son accidentially bumped into my laptop that was on the table and it fell on the floor. When I turned it on all I saw was color damage to the screen. The color damage appears in cracks, but there are no physical cracks on the outside of the screen itself. How much does this cost to fix? How much is the cheapest warranty if that is the best and cheapest way to go?

Answer:HP Laptop Dropped and Screen Colors Messed Messed Up

Most screens are expensive.I would suggest you to call the hp support number of your country and get a quote for part and service from them. 

1 more replies
Relevance 31.57%
Question: Colour changes

I have uninstalled Epson 3490 scanner and installed again but now when I try to scan or click on options the screen goes blank for a second and then colour is changed. When I go into display and settings, colour is back to 8 bit. When I set to 32 it is okay until next time.

Answer:Colour changes

It sounds like a driver problem, do you have the latest drivers? click here

2 more replies
Relevance 31.57%

Hi,

I know some basic stuff about computers, but I don't know how to fix this problem.

I have Windows XP. Firstly, the computer started running slower than usual for a while (a few weeks), then one day when I started the computer up, a screen came up in the DOS bit at the start asking me what mode I wanted to start in as there was a problem. I selected the option (and Im paraphrasing here) 'The last good configuration' as it seemed best. From then on, the colour went to 4 bit, and an 800x600 resolution. I can't change these settings as I normally would, as there are no other options available. I can use the computer fairly normally, except the awful colour and res. However, if the screensaver comes on, and I re-activate the screen, it will be totally messed up - the edges puffed out like a pincushion setting, black and white, lines travelling down the screen and flickering, sometimes going totally black then coming back again.

My housemate started the computer up and somehow got the original DOS screen back asking which mode to start in - he selected 'safe mode' and the colour was then good - except the internet then wouldn't connect. (I have broadband so it's normally automatic - I don't know how to connect it manually)

This is my brother's computer, so I don't know a lot about it - programs and so on - he's un-contactable at the moment and will be for a couple of months... I'd greatly appreciate any he... Read more

Answer:4 bit colour - why?

to connect to the internet in safe mode you have to select safe mode with networking

But sorry thats all I can offer at the moment
 

3 more replies
Relevance 31.57%

runnin xp on hp 64 bit i only have 4 colours colours wont hold very hard to read the screen

Answer:colour very very low

Try re-installing the graphics driver for your PC or laptop model from the HP website:HP Drivers for UK models: http://www8.hp.com/uk/en/support-dr...HP Drivers for US models: http://www8.hp.com/us/en/support-dr...

2 more replies
Relevance 31.57%

Amber. Black. Cyan. Denim. E what?
What's your guess?

Answer:So what's the next Colour?

Emerald

2 more replies
Relevance 31.57%

For images I use both Irfanview and XnView (both great apps) but I want to associate jpgs with Xnview for opening from Explorer. When I double click the photo I get a dialogue box telling me this is not a 32 bit application.

Sure enough - in Display, settings I do not have the choice of 32 bit colour. Can I rectify this?

Running W2K, 800 Celeron, 128 ram, S3 Trio 3D/2X Version 5.30.04 (8 mg shared ), CM1772FS Monitor 17" (New) set at 1024x768, No graphics card.

Many thanks in advance.

stepheno

ps I have installed the most up to date drivers for the monitor
 

Answer:How to get 32 bit colour?

8 more replies
Relevance 31.57%

HelloI have been putting of this question for some time, as I fear it is a very complicated issue for this tiny brain to deal with.It's to do with the colours of images that I scan into my system, when viewed in photoshop, they do not really appear the same as the image in real life, the colours are quite different, is their a piece of software that can deal with this issue, or is it down to lame brain here to do some twiddling?Thanks for your help.eden

Answer:Colour out not the same as colour in...

click hereclick hereclick hereSome guides to calibration.

3 more replies
Relevance 31.57%
Question: No colour

Hello,I am new to the Acer forum and this is my first post. Good to be here. I have an Acer pc which will be a year old next month. Recently, I have been able to print in black and white only. No colour. The test page from the printer is in colour. Device Manager does not tell me I need new drivers. Could there be another problem I have overlooked? Will welcome your input.Thanks.CarleySr. AcerPC,64 bitIntel i54440, Win 8.1ITB hard driveNon-touch Emsisoft Antimalware and Antivirus











Solved!
Go to Solution.

Answer:No colour

Thank you for getting back. The printer printed in colour from my Win 7 laptop.I tried some troubleshooting with Win 8 and the problem was corrected.I don't know what the problem was.Sorry, I should have checked the details. Anyway, it works. Thanks. 













View solution in original post

3 more replies
Relevance 31.57%

I've recently re-installed windows 98 and now I can't seem to get my colour up past 16 colours. I would like to be given a straight awnser.

Thank You
 

Answer:256, 16 bit, 24 bit colour

You need to reinstall the correct drivers for your video card.
 

2 more replies
Relevance 31.57%
Question: colour

i just got another 512 ram today and stuck i in and i also reset my cmos as it was comeing up with bad checksum error when my pc booted. i then started up my pc and all the wrightin on the start up was yellow . it continued to loads windows xp and everything was in a shade of yellow so i thought i must of knocked something while i was putting in my ram. i shut my pc down and checked everything and restarted my pc but now everything is in a shade of red, i restarted my pc again but it still stays red. never known this happining before anyone got a clue to whats wrong

Answer:colour

i found the problem the dvi adapter had a few pinns missing changed it with another and now its fine

1 more replies
Relevance 31.57%
Relevance 31.57%
Question: no colour

i have a lexmark 1270 all in one. i have recently got a new pc running winxp pro as i was on the old pc. my problem is that my printer no longer prints in colour only b&w. i know the printer is ok as ive tried it on another pc. is there a setting i need to change to allow colour printing..thanks in advance

Answer:no colour

Check the printer software is not set to print black only Setting ? Printers and Fax ? Right Click on the printer - Properties

7 more replies
Relevance 31.57%

I like using "windguru" for forecasting the weather. Based in the Czech Republic, they're usually spot on which is more than I can say for the local effort.

Until recently I used Netscape 7.2 and subsequent to that Opera vers 11. These both colour coded the wind speeds and gusts and the expected temperatures; you know ranging from blue for cold to red for hot. For various reasons I have had to make use of IE-8. I can't get anything in colour. Temperatures and wind speeds are just black numerals on a white background. I've searched through IE's options but can't find any tweak to resolve this. The URL is www.windguru.cz and I'm running XP home. Can anyone help?

Thanks
 

More replies
Relevance 31.57%

Is there any way that i can get my computer to use 256 colors? I have a friend who has a cd which will only work in this mode.As far as I can see I can only get 16 bit. I have a Nvidia graphics card 512 Geoforce 7900 GS

Answer:256 bit colour in Win xp

If it is a program, you can right click on it, and go into compatability, and check the box that says run in 256 colours

2 more replies
Relevance 31.57%
Question: Colour

I wish to use a 3D graphics package but the info about it say my coluur settings should be 32Bit however the only settings i have is 16 or 24 have i lost a setting or is these the only 2 settings available on XP Home

Answer:Colour

Bomberboy1943 I'm using XP Home and my settings are 16 or 32 (no mention of 24).

2 more replies
Relevance 31.57%
Question: 256 colour

heyyy guy im using a hp compaq nx6110 running windows xp pro sp3,  with 512 ram, 40gb hdd and mobile intel 915 gsm chipset. and intel pentuim M 1.73 ghz this is the second time i have came across this problemthe first time trying to play command and conquer generals,   my laptop has more than the recommended specs for it Spec for C&C generals  cpu 800 hmzram 128hdd 3.2 gbgrathics 32mb Specs for C&C Renagade cpu 400 mhzram 96 mbgrathics 16 mbhdd 700mband the second time is when i play Command and conquer renagade, i can play the first level of it and  the it crashes out with a black screen and an error message saying my grathics has stop working and goes in to 256 color mode its not a diver issue the drivers are up to day [recovering disk space - old attachment deleted by admin]

Answer:256 colour

Quote from: blackrainbow on June 17, 2010, 08:31:21 AMmobile intel 915 gsm chipsetThe problem most likely lies in this, as the Intel chipsets are not designed for 3D gaming and can't handle the stress.You're probably right, it's not a driver issue, it's a hardware one. It's not a problem, it's just that you've reached the limit to what the Intel video chipset can do.

8 more replies
Relevance 31.57%
Question: Colour Ink

Brother DCP 135C Yellow and Magneta colours not printing properly. Have done a clean few times and even used some cleaning fluid on heads but still no joy. Using CISS

Answer:Colour Ink

Have a look here for a solution link text.
I have found that using the clean ing facility repeatedly then leaving it to soak for an hour or two and repeating the operation often works.

3 more replies
Relevance 31.57%

Just reinstalled Win98 and only have 16 colours. Have tried to find a driver thro DriverGuide, Microsoft, and other popular driver sites. I have a Liteon A1554NEL monitor. My windows disk would probably have a driver, but I don't know what to look for as its all abbreviated or code. Help would be appreciated.
 

Answer:Where has all the colour gone?

6 more replies
Relevance 31.57%
Question: Only 16 bit colour

Please help, my pc graphics card will only display 16 bit colour and reverts back each time I try to change it.Thanks a lot Funkam

Answer:Only 16 bit colour

funkam have you tried reinstalling your graphic's card drivers?What operating system are you using?Mike

5 more replies
Relevance 31.57%
Question: Colour in win '98

I just recently (Yesterday) reinstalled my friends windows '98 OS, and now he can only get 16 bit colour so a lot of web pages are appearing in odd colours. Any ideas on how to resolve this problem????Thanks in advanceJason

Answer:Colour in win '98

First check in Control Panel/display to make sure the color is set correctly in there. If it is look in System/Device Manager for any conflict on his Graphics card, if there is look at the troubleshooting tips.

3 more replies
Relevance 31.57%

Hi There,

I have a dell inspiron 6000 with mobile intel chipset 9145. I am trying to play TV out, but whenever i attach it to the TV - i am only getting black and white. I have tried changing the colour adminstration within properties to kodakdc and srgb colour space profile but i am still having the same problems.

Any ideas would be appreciated.

Thanks
 

Answer:Tv out Has No Colour

It could be a PAL/NTSC setting somewhere. Some laptops have a BIOS setting for TVout. If it's set for NTSC and the TV is set for PAL, or vice versa, you will get video issues. I had a an old DVD player that was 'stuck' on NTSC only. When I tried to play a PAL movie in it, it would play in black and white. Check the back of the TV or wherever all the control switches are (or just read the manual). Check the PC BIOS and the TVout settings if using separate video hardware/software....

Good luck!
 

3 more replies
Relevance 31.57%
Question: No colour

Hello,I am new to the Acer forum and this is my first post. Good to be here. I have an Acer pc which will be a year old next month. Recently, I have been able to print in black and white only. No colour. The test page from the printer is in colour. Device Manager does not tell me I need new drivers. Could there be another problem I have overlooked? Will welcome your input.Thanks.CarleySr. AcerPC,64 bitIntel i54440, Win 8.1ITB hard driveNon-touch Emsisoft Antimalware and Antivirus










Solved!
Go to Solution.

Answer:No colour

Thank you for getting back. The printer printed in colour from my Win 7 laptop.I tried some troubleshooting with Win 8 and the problem was corrected.I don't know what the problem was.Sorry, I should have checked the details. Anyway, it works. Thanks. 












View solution in original post

3 more replies
Relevance 31.57%

Follow up to post on 20.01.04 requesting help to get a colour picture on my TV to watch movies from my computer.

Answer:'Gaz 25' or 'Ton' - TV-out, no colour (20.01.04)

in the original thread - not in a new one.

2 more replies
Relevance 31.16%

hi there, a newbie here! had a virus a while ago, which was repaired by the guys in a computer shop. the virus wiped out some of my hard drive and i have now lost the colour green & red from my screen? can anybody help me? cheers el

Answer:[resolved] colour gone???

I would think your monitor plug is not seated well. Make sure everything sits well. I would disconnect and connect all the cables/wires. If this is not the issue go ahead and swap your videop drivers with the new ones. What kind of videocard do you have ?

3 more replies
Relevance 31.16%
Question: Colour gradients

In a WEB site that I am building I have inserted the following code into native HTML.style="filter:progid:DXImageTransform.Microsoft.Gradient..etcI am using Arachnophilia as my development platform and although the above code seems to work OK, every time I view the results I get a request to activate ActiveX controls.If and when I put my site live would users to the site be requested to do the same? If so is there a better way of producing a colour gradient effect?

More replies
Relevance 31.16%
Question: Colour Lasers

I've been using a friend's OKI C5300 colour laser to print wedding invitations, booklets etc. for friends and family.I'm being persuaded to do this professionally but I need advice in terms of the cost of printing and, consequently, I have no idea how to charge?Help!

Answer:Colour Lasers

You need to add up the cost of supplies and add a bit for "labour"eg. my HP laser 3 cartridges do 2000 copies = £1202000 sheets of paper (4 reams) =£20£140/2000=7p each.So the real question is ... how much can you get for your time ?

6 more replies
Relevance 31.16%

is it possible to change the colour of the progress bar in windows xp,currently green to any other colour..thanks

More replies
Relevance 31.16%
Question: C66 Colour problem

Epson C66 Stylus printer. Will not print in red (Magenta Cart)comes out yellow. Everything was fine untill I put new cart in.Tried another make of cart but still yellow. Tried cleaning and alinement but no use. Other colours okay just this magenta.

More replies
Relevance 31.16%
Question: svideo no colour

i connected my laptop to tv. i have a s video connector and i connected to a scart wich in turns connect to the tv but i have no colour and the qualitiy is poor, i have to press the av button on the tv remote to see a picture, but when i connect the xbox to the scart of the tvand switch it on it automatically switches aux, and it has colour. is it because i press the av button on the tv remote, because there is no aux botton.

Answer:svideo no colour

a computer graphics card will not auto change to the av channel on your tv like dvd players and sky digiboxes would etc because its connected via an adapter lead that just converts the signal from s-video to composite and in turn the scart adapter you are using just carries that composite signal which is not capable of telling the tv to change to the av channel as a proper scart would.you just have to change it yourself.as for the black and white picture.if the disc you are playing is a jap or us ntsc disc then it will be black and white if your tv does not support ntsc playback.most tvs do support ntsc but only if its connected to the av 1 scart on the tv set(if you have more than 1 on your tv then av1 will be the ntsc compatable socket)check control panel/display settings/advanced for a tv out set up menu and set it up for pal uk.

2 more replies
Relevance 31.16%

Hi All,
Is there any app available to change eye colour on Windows Phone. I'm using Lumia 650.
Thanks

More replies
Relevance 31.16%

Hi

When I use internet explorer, and open up new tab in the same window, the new tab colour is quite dark so can not read on the tab which web page it is in there.

How can I change the colour so that writing will be more visible.



Regards

Answer:Customizing new tab colour in IE 9

Hi email257525 and welcome to SevenForums

I do not know how to manually change each Tab's colour, but fortunately you can disable them:

Open Internet Explorer, click the Settings Icon and select Internet Options.


Select the General Tab and under the Tabs Section select Settings.


Now deselect Enable Tab Groups from the Tabbed Browsing Settings Dialogue.


Close and reopen explorer and coloured tabs should be disabled.

2 more replies
Relevance 31.16%
Question: Colour temperature

Can anyone tell me what temperatures equate to the settings I have for selection on my LCD monitor please.ie Warm / Natural / Cool, I want to set 6,500K but of course the monitor maker couldnt put it that simply.Would you think that the Natural position would be in the right ball court?Thanks for looking.

Answer:Colour temperature

what suits you there is no hard and fast rule

5 more replies
Relevance 31.16%
Question: Text colour?

hi all,hope you all well, Can anyone please tell me how to/or if its possible to change a paragraph of text say from black to blue without having to re-type it out?,just like to say that i only have the oem version of xp home so i dont have word or anything like that just notepad and word pad,thanks all in advance keep up the good work and take care,thanx in advance nigey ;-)

Answer:Text colour?

In Wordpad, highlight the text, Format, Font, change it there.

6 more replies
Relevance 31.16%
Question: Font colour

I remember reading the settings for creating a custom font colour that appeared either silver or gold. It gave exact figures for the saturation level of each colour. Does anyone know where I can find this?

Answer:Font colour

In Word go to format>font and choose from the drop-dowm list; if you go to "more" you can tweak colour to exactly what you want.

6 more replies
Relevance 31.16%

What is the default colour of windows 10 boot up screen, If I open my laptop display fully I get a red dominated screen and if I do not open fully it is a blue dominated screen. I am wondering if I have a loose wire problem.

Answer:What is the default colour W10

Blue

2 more replies
Relevance 31.16%

is very poor.The card is an NVIDIA GeForce4 MX Integrated GPU.I noticed that the S video slot on the back of the pC has seven holes & the TV has four. The S Video cable i have used is only four.Is there any way i can correct the lack of colour, there is some but it is very poor.

Answer:When running a DVD from my PC to the TV the colour

Do you have the TV output from the graphics card set to the correct TV system (PAL or NTSC or even SECAM)?Normal S-video does have four only connectors, at least all those I've been associated with.

10 more replies
Relevance 31.16%
Question: Colour Change!

Hi guys,ive got this weird problem.All colours on my monitor has changed.For example,my red is now black.I think its got something to do with my nephew,but he says he has,nt changed anything.Could it be some kind of infection?Ive tried system restore,but its still the same.Any ideas?

Answer:Colour Change!

DOH,Ive sussed it.The cable was hanging out at the back of the tower.

4 more replies
Relevance 31.16%

Hello, When i take digital photos of lets say a white building it appears exactly right on the screen, however when i print using my Epson Stylus C60 with fresh cartridges installed(and the same with the old ones)the white building is more of a greyish/purpleish/pinkish colour.This fault is there with all colours but is most apparant with white. any advise would be greatly recieved. Thank you. Mike

Answer:Colour representation

What program are you using when printing your digital prints? When printing photo's etc from other sources do they differ as-well. The type of paper you are using can greatly effect the colour output, I found using 180 photo paper from click here improved colour output, the ilford paper available from pc world was pretty good to. You may need to set-up your monitor and the colour profile for your printer. Most photo programs have a gamma set-up program to adjust your monitor correctly, have a look at click here and click here to check your monitor.Your printer may then need setting up to match the profile of the monitor. I am using an Epson C70 and I had to set my profile as RGB colour scale. You will find this setting in printer properties in colour management. You could also go into the custom advanced settings of the main Epson print page and adjust the levels of brightness/contrast or the ink levels.

8 more replies
Relevance 31.16%

I have a gf 5600xt graphics card, i can only get black and white picture from s video out put on my tv. how do i get colour ?.

Answer:no colour on s video out put.

Could this be a PAL setting ? check to see if the tv is setup as NTSC,if so change to PAL.

2 more replies
Relevance 31.16%

I Am Using Sony Dcr- Hc 30e Handycam.in The Lcd Screen The Red Colour Alone Is Not Visible During Playback/ Recording. Hence The Figure Is Not True To Colour.while Viewing Through Tv Or Pc There Is No Problem In The Colour Of The Big Sreen

What This Problem. Can Anyone Know Answer To The Problem.

S.mariappn
 

More replies
Relevance 31.16%

I have a hp deskjet930c and when i go into toolbox and then ink levels it shows that the colour cartridge is at 50% but when i print it only prints in one colour(blue) the other two colours are missing, is it just a duff cartridge or is there anything i can do?

Answer:Printing in only one colour

Try cleaning the cartridge I think you can do this within the tool box.Failing that if you have been using the other colours a lot you will find it is empty and just needs replacing. It may be showing 50% as you still have blue in the tank.

6 more replies
Relevance 31.16%

Please can anyone help with the following problem?I have Windows XP Upgrade Home Edition and everything worked well, however following a house move on resetting everything up, I have lost my red colour from everything. The monitor does show a red band (plus white and blue saying 'no signal') if I start it before powering up the system, also it has a red colour adjuster of it's own which changes nothing but does show the red colour, so to my limited knowledge I thought that meant that the monitor is ok.However, everything else is missing red and is predominantly blue, green or yellow and grey.I have tried altering all the settings, also done a system restore to a date prior to moving and nothing has changed, can anyone help please?Samwella

Answer:Help, Red Colour Loss!

This may work, may not but try removing ALL external cables from everything on your computer - power, peripherals (printers etc.), monitor, everything. Leave it for a while - this is just so you can collect yourself and calm down. Then reconnect everything very carefully.This doesn't do anything more than connect everything up again but there is just a chance that you've got some cable loose or the wrong way, you know the sort of thing. This procedure has worked for me in the past, it may work for you.Brian

7 more replies
Relevance 31.16%
Question: Windows 98 colour

i just ristalled Windows 98 and the maxiumum amout of colours i can get is 16 please help!

Answer:Windows 98 colour

If I remember 98, try right clicking the Desktop, Active Desktop, Customise Desktop, Settings. Increase the screen area and choose High Color 16 bit.

6 more replies
Relevance 31.16%

My monitor will not show red.It stopped once before;went back to normal for one day;then stopped again.It is a Toshiba TekBright 710 V.If I push the bottom "select" button; then one bar is PINK.If I push the extreme left button;the screen curls, momentarily showing all colours--including red.But in all ordinary programmes,there is no red hues at all.Seagate computer.windows xp professional edition.

Answer:WHO UNDERSTANDS COLOUR ?

This sounds like a poor connection either with the cabling to the monitor or within the monitor itself.Check that the cables to the monitor (both ends) are fully pushed home. If that doesn't fix it then it is probably inside the monitor and there is not much you can do yourself - a trip to a repair shop.Just as a final check, though. Are you able to try another monitor?

5 more replies
Relevance 31.16%

i have a dell 1907fp screen any idea where i can get a colour profile for it i have been looking for hours.thanks

Answer:where to get colour profile?

click here=johnny.

2 more replies
Relevance 31.16%

When trying to find Documents in the file structure I found there were two folders one blue and one yellow and they were not the same. I suppose about 90% were the same but the rest were extra. I have recently changed from Windows XP to Vista. Could this have any bearing on the problem?Regards

Answer:Different colour folders

reply

2 more replies
Relevance 31.16%
Question: Lost colour

I am trying to set up a new Medion AkoyaP5315D (MD8351) using Widows 7, but find red component of spectrum is missing in display. In fact this channel seems to be set black, and slider in Calibration doesn't move. Anyone with information please.

More replies
Relevance 31.16%

Satellite Pro L20 PS25E with Intel 915 mobile videocard is connected to PAL TV and gives only bw picture. Settings set to PAL BG in videocard, still only B&W picture. Other forums say this card ALWAYS give NTSC picture and cannot produce PAL coulour. Is this true?

Hope not, as I bought three laptops of this type and was wanting to connect these to tv's throughout the home. Any help appreciated;)

Answer:Satellite Pro L20 - No colour on TV

Hi retrieber_1,

Usually if you only get a black & white picture it?s a wrong output setting of your notebook. I think it?s something wrong with PAL and NTSC settings.
At first you should update the display driver. Newest driver you can download from Toshiba page.

And what cable you are using for this connection? S-VHS cable?
If yes test another cable. Use a high quality cable, especially if you have a pretty long cable.

3 more replies
Relevance 31.16%

I am using Windows XP. I have an Epson Perfection 1650 Scanner. Everything was working perfectly, but now when I scan a document with Grayscale setting, then print it, it prints out in BLUE.It isn't a printer problem as when I use the printer directly from the PC everything is OK.Any ideas please?

Answer:Scanner changes colour by itself!!

resetting your scanner from the menu. Mine did the same thing - Epson GT-7000 Photo (a bit old in computer terms)- all the grey scale photos came out with a strong blue tinge.Resetting the scanner to factory defaults seemed to cure it.Bodi

10 more replies
Relevance 31.16%
Question: Colour Problems...

Hi, My Monitors missing a whole range of Colours, Its like one of the Colour guns is not working.
I dont think its the Monitor as when it starts up the wee box that mentions the Screen resolution has all its Colours. It started after I moved the PC and I bent some of the Pins in the Monitor to PC cable. I replaced it with a new cable but to no avail.
Now I have no Greens or Yellows, only reds and Blues.
Any Ideas what else it Might be, The Graphics card was removed ages ago and as far as I nkow its been running fine just on its built in graphics...Until now that is.
I have fiddled with every concievable colour control but it dont help any.
Im On Microsoft Vista 32 bits on a 4 year old Median PC, The Monitors a Proview.
Any Advice or help would be much appreciated...Blood.

Answer:Colour Problems...

have you rechecked pins etc? it sounds like your green feed or gun is not working
johnny

3 more replies
Relevance 31.16%

I have recently dropped my HP Desk jet 895cxi printer.
Now it will only print in Black (Not Color) although there is ink
in the cartridge.
Can I repair this myself?.......and HOW?......

Answer:No Colour Printing?

Have you taken the colour cartridge out and then put it back in again?
Was/is the cartridge recognised?

1 more replies
Relevance 31.16%
Question: Loss Of Colour

I have al1916a acer lcd monitor.It has lost colour since purchase i have tried all colour adjustments butstill no joy. When i press auto config button on screen it shows screen as it first was for bot 2 secs then back to fadded display.HHHHHHHHHHHEELPPP.
 

Answer:Loss Of Colour

No Multiple posts on the same subject
 

1 more replies
Relevance 31.16%

I was loading back windows xp to a system and after a while the screen go black when i tried to trun off and put it back on the screen dim in colour on and off like as blinking slow animation i turn off the entire sys. and tried back but the same think happen.I am really worried here.

Answer:screen dim in colour

try a different monitor to isolate if its the monitor failing or the video card.Answers are only as good as the information you provide.How to properly post a question: Sorry no tech support via PM's

2 more replies
Relevance 31.16%
Question: colour problems

after trying to load a-o-l,8 i had to reboot pc to origanal settings now i find i can only get the basic colours and cannot alter graphic size,ive tried going to settings and altering them but no good i know monitor can take the changes as had it in before but cannot remember how to do it---do i need to re-install win 98?

Answer:colour problems

Do not re-install W98 yet.The probability is that you have somehow "lost" the display drivers.Try device manager in Control Panel > System.........click on the Display adapter, and properties, and then select driver and update driver.At this point you should be able to install your video card driver over again.

1 more replies
Relevance 31.16%
Question: colour quality

When I download still images from my camcorder on to my computer, the colours look very dull and lifeless-very different from how they look on the LCD screen of the camcorder. Is there any software that could improve image quality?

Thanks-this is a great site.
 

Answer:colour quality

If you just want to pep up the image a little, Irfanview is simple: www.irfanview.com It is primarily a viewer, but it has some tools for tweaking an image.

This is freeware that will do a better job: http://www.freewarefiles.com/programs.php?ProgramID=1012&categoryid=3&subcategoryid=36 It is a lite version if their shareware program, which is excellent for the price. The freeware has the things you need like histogram and saturation that Irfanview lacks. You can download the manual for the full version at their site.

If you plan on spending the time to really learn photo editing and donít want to spend any money on a program, Gimp is now available for Windows. It isnít easy to learn, but has the capabilities of a good intermediate graphics editor: http://www.gimp.org/~tml/gimp/win32/downloads.html

These are also free and will do a nice job:
http://www.ab.wakwak.com/~knight/
http://www.serif.com/photoplus5/index.asp

If you want to buy an intermediate image editor, Uleadís PhotoImpact and Jasic Paint Shop Pro are both excellent. From the reviews Iíve read PhotoImpact is easier to learn and at least as full featured compared to Paint Shop Pro. They both have 30 day free trials if you want to try them:
PhotoImpact: http://www.ulead.com/pi/trial.htm
PSP: http://www.jasc.com/download_4.asp
 

1 more replies
Relevance 31.16%

I ask because Half the colors from this message board do not appear in FF.

For example. My name, in IE, is red. In FF, my name is black. On the index page there is a key that identifies the members and who/what they are.. In FF, only around 5 or six actually have colours. The rest are black... Even tech which should be light blue, is bold black.

Is there a fix, patch or any thing I can do to get FF to recognise colours like IE does?

Answer:Are Fox's Colour Blind?

Same problem here. None of the team colours are there, and Tech position is in bold black.

I'm guessing there's no patches as this version of Firefox was downloaded two days ago....

-EDIT

This is quite amusing really, as we're always telling people Firefox is better than IE and almost everywhere can do a better job than it..... not much of an advert really is it?

10 more replies
Relevance 31.16%

Have an printer which is an deskjet f 380 and when print something normally an colour scene comes up warning of colour levels but cant seem to find where this is
It should be control panel printers right click properties but its not there what to know how much black and colour is availiable
 

Answer:Where are the colour levels

Have you tried reinstalling the drivers?

it should be called toolbox under preferences

from this link... http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&lang=en&product=1128296&
 

1 more replies
Relevance 31.16%
Question: Browser colour

Hi guys
Is it possible to change the colour of the Ie8 browser.By this i mean the light see through blue colour at the top and bottom of the screen.I have problems with my eyes and am finding after a while that default colour starts to irritate my eyes could do to make it black.I know you can change it in other browsers but im used to Ie.
thankyou

Answer:Browser colour

Change your desktop background image. Alternatively, press F11 to expand IE8 to full screen without the borders. To see the tabs and menus, mouse to the top of the screen or press F11 again.

3 more replies
Relevance 31.16%
Question: Colour profiles

I have a Kodak DX4330 camera, an LG Studioworks 775N monitor & an Epson Stylus Photo 830 printer.To get the best colour print results from this setup, do I need to set the colour profiles all the same? The camera uses sRGB but the monitor & the printer each have different profiles originally installed with them. I can (& have) set both to sRGB; for best print results should I use this on all three or the original profiles?

More replies
Relevance 31.16%
Question: 3D Colour Schemes

Hi,
I'm looking for a Software application whereby I can draw a floor plan of a room, then the drawing can be changed to a 3D image in which I can try various colours etc.
As I will only be using it once, I would prefer if it was Freeware.
 

Answer:3D Colour Schemes

Have you tried some of the different paint makers websites?
Or even check out some if the "Hardware Stores" such as Lowe's and Home Depot.
I have seen several "Online" programs ate many of these sites.
 

2 more replies
Relevance 31.16%
Question: Text colour

Hi, I have at the moment blue as my word font text colour, and when I change to black permanently, or try to, it persists in reverting back to the original blue. Is this a norm for Outlook office 7, or is there a permanent way to keep it black?

Answer:Text colour

You mention Word, Outlook and office 7. To set default colours is different in Word and Outlook. Is it Office 2007 or are you referring to Windows 7?Cannot help until you confirm which text needs changing.

7 more replies
Relevance 31.16%
Question: colour problems

I run a Windows 98 SE computer with 10GB hard disc and 192 MB RAM. Recently, I had a bad time installing the Asus External CD-RW. I have already uninstalled then re-installed it and did manage to copy my latest pictures. They appeared on the CD as I expected but then, each time I tried to do anything with them the computer grumbled and crashed or froze. I persevered over several days and did get something going (using the CD drive, chiefly) but then everything went haywire and I couldn?t open any of them. Finally, all the icons changed one at a time and I watched as they changed again and 3 letters appeared on the icons, one by one. I can?t recall the letters but they did indicate that they were not going to be opened by me or anyone else now or ever! What have I done wrong? The computer was not at all happy and made complaining noises, as did I. I tried again this morning and although I was able to put them on the screen after a lot of effort, the computer didn?t like it. I tried other CDs and they were OK. So I?ve wiped the disc. Maybe it?s a duff disc. Now there are several things wrong with the computer; the colours are not right. The first thing that came up when I clicked OE was a blue notice (before the OE and Dialup window appeared.) Now it?s white and the colours in photos are weird. I?ve rebooted a couple of times and there?s no change. I?ve checked the display and it shows 256 colours. Is there anything I can do to rectify it?Any suggestions will be welcome.Silver... Read more

Answer:colour problems

You don't mention the software that you used to try to work on your images, and it would help to know that.Your display settings have certainly gone AWOL, and the first thing to do is to reset them. As you may know, you do that by right-clicking on your desktop and selecting 'properties' from the menu that appears. Click on the 'settings' tab (I'm working blind here, because I'm running WindowsXP) or whatever in Win98 that shows you two sliders - one with the resolution, and one with the colour bit depth. Move the resolution slider until it reads 1024x768, and then see if you can move the colour bit setting until it shows '16 bit'.If that works you should now be seeing a better display.If it doesn't work you may have a corrupted or missing graphics card driver, or monitor driver, or both, and we'll deal with that if it crops up.I'm puzzled - and a tad concerned - over these 'complaining noises' that you say your machine is making. Can you describe them in greater detail, and tell us precisely at what point in the proceedings they happen?

10 more replies
Relevance 31.16%

Hello, I have a G10 137 and my TV-tuner receives all programs, only they are in black & white and there is no sound.
Does anyone know what to do?

Answer:No colour on G10 137 while watching TV

Hello

The first thing that you should check is TV type setting. I don?t know in which country you live and which standard is there but please be sure that the right one is adjusted.

Bye

2 more replies
Relevance 31.16%
Question: Page Colour

Hi Everyone,
I am working on a TAFE project. The word document I have created has the page coloured, text and photos on it but when I print the page out the background colour will not print, everything else does. Can anyone out there help me with this problem.

Thanks Heaps,

Tallangower

Answer:Page Colour

Originally Posted by Tallangower


Hi Everyone,
I am working on a TAFE project. The word document I have created has the page coloured, text and photos on it but when I print the page out the background colour will not print, everything else does. Can anyone out there help me with this problem.

Thanks Heaps,

Tallangower



I'm wondering if it's a problem with your printer or printer drivers instead of MS Word.

What version of Word are you using? Usually Under "Help" "About Microsoft Word" or if it's MS Word 2007 you probably won't find that menu

6 more replies
Relevance 31.16%

Need to change font colour in OE 6.Is there a simple way to do this?I have tried "TOOLS" - "OPTIONS" - "READ", but whatever I change there, it is blank!geedad

Answer:font colour in OE 6

Type your message (or a bit of it) then click Format>Font and in the box at the bottom left hand corner is a colour option.

5 more replies
Relevance 31.16%
Question: COLOUR - a puzzler

My screen (the monitor) will print in blue, in green; but NOT in red.If I push the monitor button marked "degades", the screen will momentarily flood with ALL colours, including red.But here is the real puzzle:They say that yellow is produced using half red and half green. Any site can, and often does, write in yellow. How could that be?--as it needs to use the bannished RED?Who know how to get the RED back?

Answer:COLOUR - a puzzler

if it is a vga connected monitor check that none of the pins in the vga plug are bent.

4 more replies
Relevance 31.16%
Question: IE6 Toolbar colour

At the moment, I am using Windows ME on a Parckard Bell computer with IE6. The problem is that I want the toolbars (e.g. the address bar) in IE6 to be the same as my colour scheme. At the moment there's "Packard Bell" slapped all over it!Any ideas?Thanks

Answer:IE6 Toolbar colour

You could download FreshUI and change it along with the OE titlebarclick here

1 more replies
Relevance 31.16%
Question: colour problems

The other day I inadvertently spilled a cup of coffee while at the computer. The only items that the coffee spilled on was the underside of the printer( which was not turned on at the time) and the cordless mouse. Since this happened, the colour on my monitor is all wonky. Everything seems to have changed colour slightly and any lettering is now a combination of green, purple, red, and blue although predominently green and red interspersed with the black. Since the liquid did not spill on the computer, monitor or keyboard I am wondering if this problem just co-incidentally happened after the incident although I find that hard to believe. Is there any way to fix this myself or will I need to take all the components in to be cleaned or dryed or??

Answer:colour problems

Hi -

Run a DirectX Graphics Kernel Diagnostics report -
START | type dxdiag | if x64, bottom-center of screen click "... 64-bit..." | Save as a text file.

Zip it up and attach to your next post.

Regards. . .

jcgriff2

.

1 more replies
Relevance 31.16%
Question: Colour Printer

Friends, some advice please. There are 4 cartridges in the HP Colour Laserjet CP1215 printer - 1 black and 3 other colours. Now, when all the colour cartridges run out leaving only the black one, will the printer print in black only for all colours anyway? Thanks.

Answer:Colour Printer

no do not think it will work, they are all the same all carts have to have some ink for it to work at all

5 more replies
Relevance 31.16%

my ' KODAK ESP310 AiO' printer only printing blue/yellow.not picking up red. I have replaced cartridge Kodak 30CL. still no red!

Answer:colour red not printing

The print head nozzle for Red is probably plugged up. Are you using genuine Kodak ink? Do you use the printer regularly? That means every few days.Try running the cleaning process a couple of times. Looks like the printhead is removable. If the above doesn't work then remove the printhead and run it under hot water in the kitchen sink. You will see the different color ink come out by moving the water stream. Rubbing alcohol can also be useful to clean the bottom of the printhead. Use Q-tips. See the link below.http://resources.kodak.com/support/...

4 more replies
Relevance 31.16%
Question: Monitor Colour

When i turned my Pc on this Morning ,my Monitor colour had Changed too a Pinky Colour,ive havent altered nothing.Anyone any Ideas Please/ Its a 17 inch Goodmans Flat Screen.Thanks

Answer:Monitor Colour

It could possibly be the monitor or the video card but first of all try replugging the video cable (at both ends )

6 more replies
Relevance 31.16%
Question: Colour printing

Hi, how do I get the colours I see on my monitor to print as seen. I always get a difference between what I see and what is printed. Any help would be greatly received.

Answer:Colour printing

Adjust your monitor first using a program like click here then try again. You may have to alter the printer settings for colour as well. The type of paper you print on and the ink will also make a difference. You will never get a perfect match as one is reflected and the other transmitted colour.

5 more replies
Relevance 31.16%
Question: colour settings

Hi ,I wonder if anyone can tell me why the colour settings on my desktop with Xp sometimes jumps from 32/16 bit to 8 bit.I have to go to display in control panel and reset to either 32 or 16 bit.Any help would be much appreciated.

Answer:colour settings

Could be the hihger setting isn't sustainable, updating your Graphics drivers might help...

2 more replies
Relevance 31.16%

Can anyone tell me where on the web I can find colour printers rated to help me decide which one is the best?

Answer:Colour Printers Best Buy?

What do you want the printer for? Are you looking for one to print photos or a more general purpose printer?

5 more replies
Relevance 31.16%

is there only the 3 colour schemes in win xp pro? the blue,silver and olive green are a bit boring! Can i download any more from anywere of how can i change it?

Answer:win xp colour schemes

click here

2 more replies