Computer Support Forum

Fujitsu siemens amlo laptop, loose button on keyboard

Question: Fujitsu siemens amlo laptop, loose button on keyboard

Hi Guys
the B key has popped off my keyboard. Can I fix it back on?

Relevance 100%
Preferred Solution: Fujitsu siemens amlo laptop, loose button on keyboard

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Fujitsu siemens amlo laptop, loose button on keyboard

It should just snap back on, as long as the little plactic tabs are not broken

3 more replies
Relevance 75.4%

Hi. I was looking at a friends laptop yesterday. I saw a button on the same row as the help, wireless and power buttons. It has a symbol on it that kind of looks like this: michaelgr.files.wordpress.com/2008/01/radioactive-001.png
What is its function? I pressed it but nothing happened! The laptop model is a Fujitsu Siemens Amilo L1310G. The picture of it is here: imgur.com/QYpOy
 

Answer:Strange button on Fujitsu Siemens Amilo L1310G Laptop

Curious, do you have all the drivers from the manufacturer?

found here: Fujitsu Siemens Amilo L1310G:
http://ts.fujitsu.com/support/downloads.html

manuals are found here too
 

4 more replies
Relevance 104.55%

'Fujitsu-Siemens Amilo D 7830 Laptop!'How do you remove the Keyboard to gain access to the HD.

Answer:Removal Of Keyboard "Fujitsu Siemens Laptop"

About 3 months ago PCA Mag had an article on changing components on laptops.

3 more replies
Relevance 102.09%

I would like to replace the keyboard on the above laptop - how difficult is this? I cannot see how to remove the keyboard - all help much appreciated

More replies
Relevance 89.79%

HiyaThe keys on my keyboard are not typing what they should be...!For example the number 6 key also has & on it but types ^ when I use the shift and 6 keys.The 7 key has multithings on it but types & when I use the shift and 7 keys.Can anyone help me with this...?ThanxPam (complete PC idiot)

Answer:fujitsu siemens s7020 keyboard problem

& is the correct output for shift 7, and shift 6 should give you ^. There are no uppercase numbers so that is just how it is meant to be.

9 more replies
Relevance 86.1%

Hello

I have to choose between 2 laptops acer and fujitsu-siemens
they have about the same specifications but i just wana know the best brand

Answer:Acer vs fujitsu-siemens LapTop

post specs

5 more replies
Relevance 86.1%

please help complete novice! ive just purchased a fujitsu siemens v2055 laptop,i have just had skys broadband box now ive gone through skys set up and installed the equipment i can get the internet connected via the yellow cable but i cannot get it to work wireless.does anyone outthere what i need to do.i can find the wireless icon and it picks up the signal but just wont connect please help?

Answer:sky wireless to fujitsu siemens laptop help

First of all , have you set any wireless encryption on the router ( your broadband box ) if so , double click on the wireless icon on the taskbar and let it search for wireless networks , when it finds yours double click on it and it will ask for the code or password you set on the router , enter it in both upper and lower boxes and then click on connect , hopefully that will do it , if not come back here ! Ashley

2 more replies
Relevance 86.1%

lllogo on screen at bottom blue line i think indicates loading stops around 60per cent stays there for 3-4 minutes then screen goes black still power small flashing line top left hand corner    can hear fan working    Please help as i know nothing

Answer:fujitsu siemens amilo l laptop

Is the loading means booting to windows? Can you provide the model of your computer and what happens prior to the issue?

3 more replies
Relevance 86.1%

I have a Fujitsu Siemens laptop, running XP Home Premium, that now freezes after a few minutes from power-up. This happens with any application; Word, Excel, Firefox, MS IE etc. I can then only continue by switching off, using the power on/off switch. When it powers up again, it does so without trouble, as if Windows had been turned normally. There is plenty of free space on the HDD since I have few programs installed and all my user files are saved to a network drive.

Answer:FUJITSU SIEMENS LAPTOP FREEZES

Have you checked that your fans are free from dust which will cause overheating and of course problems. You can also have a look in the event viewer see what errors have been recorded.

4 more replies
Relevance 86.1%

Hi guys me again can anyone tell me if I am on the right lines with fault dianosis, intenal graphics blank,( inverter and screen ok tested on another board) external graphics on but distorted cannot match them to screen size. Is this the graphics chip on its last legs or is it something else interfearing with the graphic output. raely need some help here!

Answer:Fujitsu siemens Laptop problem

Try starting in Safe mode - this doesn't use the proper graphics driver - just a simple "fits all" VGA driver.See what happens.You could just try re-loading the latest driver from the Fuji-Ooji site.What do you mean by distorted - and what happens when you try to change the display settings?

3 more replies
Relevance 86.1%

Hi There,

Was wondering if anyone can give me some advice. Basically I have a Sony laptop that needs a new LCD and I have a fujitsu siemens laptop with charging issues at the moment. The LCD's on the laptop appear to be the same size, the only difference being the Sony is glossy and the FS one is Matte. Is it possible to put the FS one in the Sony? It may seem like a daft question but I just wanted to check if they'd have the same connections ect before I take everything apart.

Any advice appreciated.

Regards,

Rachel
 

Answer:LCD off fujitsu siemens in Sony Laptop

There is a remote possibility they would be compatible, but we would need the manufacturer and part number for both displays. Unfortunately, it is usually on a label on the back side.
 

1 more replies
Relevance 85.28%

Ive had an Amilo d 1845 laptop for less than a year now, and am disturbed to find 3 nasty structural cracks in its body. I wondered if anyone else has had similar problems...I'm anticipating a fight with F/S to convince that Ive not been dropping it on the floor all the time...which i havent!

Answer:Fujitsu siemens laptop falling to bits??

this comes under not fit for purpose. faulty plastic. And if they are not willing to do anything about it, it comes under the trads description act

3 more replies
Relevance 85.28%

Hi ,Can anybody help? With regards to my granddaughter?s laptop:I downloaded the manual from the fujitsu web-Site: But unfortunately it didn?t give any information as to the whereabouts of the internal H.D.I then rang their help line @ 60p a minute after 5 minutes was informed they could not locate it for me. Well I ask you was not at all pleased.I used to build computers before retirement so having stripped it down was unable to locate the HD. I found Mem, CPU. Graphics card no trouble. What really annoys me after spending 5 minutes on their 0900 pay number they where unable to help.Location if you KNOW please.Syd.

Answer:Fujitsu-Siemens Amilo D 7830 Laptop!

Normally on the side or underneath.Sometimes a little clip on the side (normally older laptops) this clip just slides across and pull the drive out.Underneath,normally 4 screws to be removed.If you have stripped this down,im a little surprised you did not see the harddrive.

3 more replies
Relevance 85.28%

I've got hold of a cheap Fujistu Siemens lifebook laptop. I was aware that the laptop had a few minor faults and that there was a bios password enabled.Bios version is Phoenix Bios 4.0. I've tried backdoor passwords, cracking utilities without any luck. Does anyone else have any ideas?The previous owner is not contactable.

Answer:BIOS password - Fujitsu Siemens laptop

I'm also aware of how laptop BIOS password are not stored the same as deskop pc's and that most utilities cannot crack on a laptop.

5 more replies
Relevance 85.28%

im lookin to upgrade my processor (buy new) its intel dual core t5450 @ 1.66ghz i would like to no wot would be the suitable one and faster than i have and it would have to be simple as takin the old one out and new one in any help will be great thanks
 

Answer:CPU upgrade on Fujitsu Siemens v5505 laptop

I am unsure it will support new 45nm processors. However, the older T7xxx series processor may work in this notebook.

But frankly, if I have to make this decision, I'd rather sell this older rig, and buy a new one, because upgrading a notebook isn't worth much IMHO. Regards
 

3 more replies
Relevance 85.28%

Dear All,

This is about my Fujitsu SIEMENS AMILO Xi 2528.

Soon after it start up then it freez. Then I have to plug it off and then on again. But sometimes it works fine, but after few minutes it freeze again . . .

Any solution please.

Thank you.

Answer:My Fujitsu SIEMENS laptop freeze once I start it up . .

Is there a point where it will freeze most common? If you can get into windows, download this program called Hardware Moniter - HWmoniter It sounds like you are having an issue with overheating.

Just be sure you are not blocking the intake vents anywhere on the laptop and that its running on a hard cool surface.

Let me know if you can get the program working and what it tells you, "Print screen" if you can

9 more replies
Relevance 85.28%

I recently inherited a Fujitsu Siemens Amilo M3438G laptop that appears to have several issues including a virus and or a failing hard disk.
 
The laptop specs are:-
1.73Ghz Intel Pentium M, 800Mhz (FSB?)
512MB ram
80Gb Samsung HM080JI SATA hard disk
VIA VT6421 VT6421 RAID Controller
BIOS 10/05/05 ver 1.10c
IDE DVD RW
No Floppy
3 x USB
1 x Flash card reader
XP Home SP2
Anti virus/malware:-
Avast AV
Malware Bytes (latest update)
The Recovery Disk I was given with the laptop is for a Fujitsu Siemens desktop and does not load the SATA drivers. Slipstreaming the VIA VT6421 SATA drivers with the Recovery Disk does not produce a working solution for an XP repair.
 
I'm not sure where to start with my request for help but I'll start by listing the problems.
 
The laptop suffered a graphics card (Nvidia GeForce Go 6800?) failure some years ago, w hich was replaced with an Nvidia ???? and since then it had not really worked properly. The refresh rate is really slow and one frequently has to wait several seconds for the screen to build. The drivers loaded for the card are the default XP ones and I have not been able to ID the card in order the install the correct Nvidia ones. Nvidia auto update  GeForce Experience downloads GeForce 307.83 02/26/2013 driver which appears to be for a 64bit OS.
In order to use a 3rd party graphics card identifier I tried to update the laptop with XP SP3 but this lead to a new entry in the Boot.ini relating to the update. Selecting this... Read more

Answer:Fujitsu Siemens laptop with virus(s) or failing HDD or both

Have you tried running TDSS killer?  I would also do a scan with HitmanPro if you have internet access.

13 more replies
Relevance 85.28%

'Fujitsu-Siemens Amilo D 7830 Laptop!'How do you remove the Keyboard to gain access to the HD.

Answer:'Fujitsu-Siemens Amilo D 7830 Laptop!'

Don't think you would need to remove the keyboard. check for a plate, may be on the edge or under the laptop 2 or 4 screws

3 more replies
Relevance 85.28%

Please help, I have laptop a fujitsu siemens lifebook E 8210. whem I start apear on a rectangle, user authentication, phonix trusted corePasword.I had removed the bios batteryut but nothing hapens.how could I find the Pasword?Help meeeee

Answer:laptop a fujitsu siemens lifebook E 8210

"I had removed the bios batteryut but nothing hapens"That must have been a real chore to do from a laptop.Sounds like another sizzling product.Ask the person who sold it to you what the bios password is, other than that, contact the manufacturer and be sure to have papers stating you are the owner. If those 2 don't work, you may as well use it for a small boat anchor, because bios passwords on laptops cannot be cracked...it is a safety feature to prevent theft.Some HELP in posting on Computing.net plus free progs and instructions Cheers

2 more replies
Relevance 85.28%

Laptop working. then stopped You Can turn on and hear fan running but nothing on screen. or when you hit any keys.. Any Advice

Answer:Problems with laptop Fujitsu Siemens Amilo D

hit the caps lock key>>>..did it stop when you were using it?.......or did you leave it and then come back to this black screen!

9 more replies
Relevance 85.28%

Hi guys just a quicky for,

my kids are currently using a AMILO 1437G LAPTOP.
,
Is there anyway without reformating the drive that i can disable the fujitsu siemens boot up logo that comes before the windowsxp boot up logo
without installing the likes of bootskin or not checking the checkbox noguiboot in the boot ini (msconfig).
Or am i stuck with it

p.s winxp came pre-loaded

i thank all clever dudes in advance
 

Answer:1437g Fujitsu Siemens Amilo Laptop

Check your bios look for an option Show Logo and disable it
 

2 more replies
Relevance 85.28%

Hello, i havent had a Problem in Ages untill now lol.

Right, My CD/DVD drive in my Fujitsu Siemens Amilo Li 1705 seems to be playing up.. Its Fine at burning data etc onto CD's and DVD's but i think its when it comes to Reading a CD it starts making these weird Noises like it wants to Spin and then makes Weird noises

Not sure what it is..

Answer:Fujitsu Siemens Laptop: CD Drive Problem

I think you just have dust in there
since the burning spins slower....maybe spinning up makes it come into contact with the dusty parts...like a clogged artery

6 more replies
Relevance 84.46%

Hello guys, I got my Amilo Pro (Fujitsu Siements) v3515 laptop 1 or 2 years ago with Windows XP (SP2, non-genuine) installed on it (without getting any kind of CD/DVD) + all the drivers needed for my laptop!

Story:

I got a modem on my PC which has also wireless internet and connected it to my laptop also. Everything went well until I got a "genuine remover" since I got that stupid "You may be a victim of software enc...".
After I re-booted my computer AVG detected the whole Windows as being a virus...
I had to format the hard disk and install a new Windows (Windows XP Corporate Edition SP3).
Now I don't have any of drivers for my laptop.. (such as the Wireless internet icon at the taskbar) or sound card driver or video card driver etc.

I really need them and I tried lots of things but didn't work.


Please guys help me, I don't want to pay anyone to do that for me because I know I can do it by myself!



Thanks in advantage

Answer:Fujitsu Siemens (v3515 Amilo Pro) laptop problem!

All of the drivers should be available from the manufacturers website.

You can try here: http://support.ts.fujitsu.com/com/su...downloads.html

6 more replies
Relevance 84.46%

I'm not sure which screws on the underside need to removed to open up the case to add RAM memory and the makers just say "take it to an authorised dealer". Can anyone help?

Answer:Opening a Fujitsu Siemens Amilo V2010 Laptop

On my IBM its expansion slot is under a small plate,details for removal were in the .pdf I d/l'ed from the mfg website.

6 more replies
Relevance 84.46%

My sound has gone from the laptop and when i go into the control panel it says no audio device and its all grey, how do i get this back?
 

Answer:Fujitsu siemens esprimo laptop no audio device help

Greetings, sambooth, and welcome to MajorGeeks...

We need some more info from you: what's the model # of your machine and what operating system version and Service Pack # are you using?

Also, please download and run Speccy, a free system information tool.

When the scan completes select 'File', 'Save as Text file', name the report, and save to an easily found location such as your Desktop.

Be advised: the report will display your IP Address and Windows Product Key. You may delete this information if you so wish.

Then attach that file to your next post per these instructions: HOW TO: Attach Items To Your Post.
 

1 more replies
Relevance 84.46%

I have a new amilo L7300 to which I want to add another 256mb stick of memory. My problem is, as I understand it, the keyboard needs to be removed for access and I haven't been able to find instructions anywhere.TIABrendan.

Answer:Fujitsu-Siemens L7300 Laptop memory install.

click here$FILE/AMILO+L7300.PDF for the user manual in PDF format, unfortunately not that informative a document.

4 more replies
Relevance 84.46%

I have recently been given at work a new projector to use it works with my dell workstation and with my husbands (dell) laptop but will not work with my laptop(fujitsu siemens amilo pro using Win XP 2002). I have got it to now show the desktop picture by pressing FN AND F3. However, no icons are displayed so not really showing what is on the desktop. Any ideas? ireall
 

Answer:optima projector not working with fujitsu siemens laptop

6 more replies
Relevance 84.46%

I've been trying to repair a colleague's laptop for him, but I'm having a little trouble working out what my best move is.

The system suffered from a reboot loop - which was caused by data corruption. I booted into HirenCD and ran Chkdsk which fixed the majority of the errors.
I was then able to get into Windows, but noticed an awful lot of errors - some system files was unrecoverable and corrupt.
His software was OEM - no CD supplied with it - and me being an absolute idiot decided that using my retail of XP Home would fix the error.
I performed a repair install, which replaced the corrupt Windows installation from before. (I made note of his valid serial number!)

However, his serial number is not valid for my retail copy of the software. I cannot boot into anything other than Safe mode with CMD, as I get booted straight to the main screen with it asking for a valid CD key. Phone activation was also unsuccessful.

I'm trying to minimize data loss, having only intended to replace the corrupt system files.
What are my options for repairing this?

Answer:Repair installation of XP Home on a Fujitsu-Siemens laptop.

You are too far gone now to do much. Have you tried your XP Home serial key?
If that doesn't work, I would boot into Safe Mode and backup the users files to a USB HDD, then boot off of your Home CD and format the drive and do a clean install. Then restore the backed up files and reinstall their programs.

2 more replies
Relevance 84.46%

My boyfriend has bought a new game on disc but our laptop won't install it. It has Windows Vista and is only a few months old.The weird thing is it plays an earlier edition of the game.Any ideas?Thank you.

Answer:Problem playing a game on Fujitsu-Siemens Laptop

Someone? Anyone?;)

6 more replies
Relevance 84.46%

Can anyone help? I seem to be having problems with what I think is my laptop overheating and despite speaking to various people cannot get the problem sorted. I think that is is a simple problem of the bios needing updating. I have downloaded the latedt bios update from Fujitsu however cannot get it to work. The file is a WinImage self extracting file which I have saved to a floppy and tried to boot from as the readme file says however my sytem just says 'starting windows 98 and indicates the a:\' (I'm currently running xp so now i'm really confused!) I have rechecked the bios information and it has not upgraded it at all ~ where am i going wrong? On the bios notes it says that it has been updated 5 or 6 times since I bought my laptop just over 12 months ago and the last 2 upgrades have been for overheating problems, if only I could get this upgrade to work I might have a system that would stay on for longer than 10 minutes! If anyone could help or point me in the right direction (perhaps there is a problem with the bios I have been supplied?) I would appreciate it very much.

Answer:Fujitsu Siemens Amilo D7820 Laptop Overheating

Flashing the BIOS (wrongly) is a very good way to end up with an unbootable 'puter.What makes you think that (a) flashing the BIOS will cure the overheating (it won't) and (b) why do you think it is overheating?To check your temps get MBM Monitor click here

6 more replies
Relevance 83.23%

Hello,

you know that fault where Windows looks at the Devices and has a problem with it in Device manager... well this is whats happened here on this Vista laptop! Im sure by doing a reinstall of windows will fix it i was hoping someone knew of a fix without doing it...

Error Coce 39 comes up!

Anymore information needed to fix it let me know!

Thank you.
 

Answer:Fujitsu Siemens Laptop DVDRW Not working in Windows Vista!!!

Anyone with help please? Really would love help on this one as its an ASAP job and i been looking about but only finding fixed for XP on this one.
 

3 more replies
Relevance 83.23%

hi
i have got a fujitsu siemens laptop and cant remember my bios lock fujitsu wont help me because i aint the original buyer as i bought it second hand from ebay. whne i goto go into the bios it has a password is there anyone who can help me remove this as i need to upgeade my harddrive and cant untill this is solved. please let me know the laptop is s series fujitsu siemens..

any help would be great thank you
 

Answer:remove bios password on fujitsu siemens s series laptop

8 more replies
Relevance 82.41%

Fujitsu Siemens 1718 Li Amilo Laptop Mouse has ceased to work?
Have changed a couple of USBs and some other minor adjustments:
Have checked and Doubled checked the Ribbon Strip connectors No-Joy?
Have loaded Linux CD boot it shows the Mouse Icon but will not move.
Any ideas wellcome

Answer:Fujitsu Siemens 1718 Li Amilo Laptop Mouse has ceased to work?

You have not accidently switched it off have you FN + another key with a blue picture of a mouse or touch pad on it?

3 more replies
Relevance 82.41%

Hi, I have this fujitsu siemens amilo pi 2515 laptop which now fails to start, I Get the Green power light at bottom eft, but nothing else. There is no sound at all coming from it (Fan, HDD e.t.c). It stopped working befo but after some period of storage, I started it up and it worked for a few days. It has now completely stopped working and I am at a loss as to what the problem is. there are a few posts online with bth positive and negative remarks about this laptop, but none of them address my particular problem.
Please any help would be appreciated.
RealGoneKid....
 

Answer:Solved: fujitsu siemens amilo pi 2515 laptop fails to start

8 more replies
Relevance 82.41%

hi my fujitsu siemens amilo Li2735 vista home premium laptop's screen broke and the cable plug for the screen broke and it was too expensive to fix so i had to unscrew the screen off so now its just like a keybord and then i got a acer 18.5 lcd monitor instead its worked fine now for a month and suddenly when i Log on now it says no signal if any one can help me out here. one other problem is that when i used to turn on my laptop it would say input not supported for every screen i used till it would get to the welcome screen any suggestions to what i should do with that too. thank you

I have tried unplugging everything and putting it back on and trying other monitors same thing happens.

i have tried pressing Fn+ f10 which is the external monitor key. when i logg on it says input npt supported so i cant even get to safe mode
 

Answer:Fujitsu Siemens Amilo Li2735 laptop says no signal to external monitor

Try going into safe mode. If that works then your laptop display setting is set to a too high resolution. Certain LCD external monitors won't handle beyond 1024x768.
 

3 more replies
Relevance 77.49%

button K is loose on keyboard. Tried to press it back, loose again. HP Pavilion ? 15-au108noBought 21 march

More replies
Relevance 73.39%
Question: Fujitsu Siemens

i have a laptop a Fujitsu Siemens Emilo, which keeps going into Hibernation mode, i bought it from Currys and they say to use the instalation disc to re-boot the pc, however i did not get a disc with the pc only the drivers disc was supplied....getting no where with Currys, can anyone help pleasethanks

Answer:Fujitsu Siemens

Currys, huh!! some advice they give you ain't it...Open control panel, select and open 'power options' here you can sort out the problem by checking the options available, including the hibrination options...

2 more replies
Relevance 72.57%

Hi I have a Fujitsu laptop that will not recognise my LAN cable.
I have cable in place etc but it just says cable unplugged.
Any ideas. Cable works with my DELL laptop so connection is good
Dean

Answer:Fujitsu Siemens amilo

what amilo? ive got the amilo pi 1536 sitting right here

5 more replies
Relevance 72.57%

i have one of these all in on systems which runs w98 se bought from curry's about a year ago. it has siezed up and needs a reformat and reinstall has anyone ever reinstalled one of these machines and offer advice please

More replies
Relevance 72.57%

Howdy

I have had this prob for quite a while, on my fujitsu siemens T-Bird, onboard graphics and sound, chipset inte i810, mobo, micro star ms-6178.

It installs the fujistu windows me disc no problem at all, but I have tried to upgrade/install xp professional, but it gets so far, and a error comes up saying a certain file is missing. Now I have tried my xp disc on another machine with the same drive and it installs and runs perfectly, I also tried with a different drive on the fujitsu rig but I still get the same error.

I can only think that the fujitsu is blocking it from installing.

Any thoughts??
bookime
 

Answer:Fujitsu Siemens XP conflict

What file is missing? Also you do not need to install ME to install XP, even if its the upgrade. All you have to do is put in the ME CD when it asks for proof of an older windows. Sometimes there may be an update that is required to install XP on an older machine such as a BIOS update - check Fujitsu Siemens site or MSI.

And if this is an burnt copy of XP, then thats the problem.

How fast is the CPU and how much RAM is in it - it may not be worthwhile putting XP on it if its going to run slow.
 

3 more replies
Relevance 72.57%

Hi, i am looking for a recovery disk for my Fujitsu Siemens V5535 Laptop. I would like to restore it back to factory settings as its full of viruses and the original disk that came with the laptop has been damaged. I currently have windows vista home basic service pack 1 installed, and i also have a copy of the drivers and utilities disk that came with it.

Thanks for your help

Answer:Fujitsu Siemens V5535

Hi -

You will need to contact Fujitsu support and inquire about purchasing a replacement Vista recovery disc -

Support Outside Asia Pacific Region : Fujitsu Hong Kong

Regards. . .

jcgriff2

`

1 more replies
Relevance 72.57%

i was thinking of buying this fujitsu siemens 3700 pc for 799.99. it's a first home computer and as such i'd prefer to buy face to face in case of problems etc so i've decided it has to be pc world, but i'm having difficulty finding it anywhere on the net for reviews etc.this is the spec. can anyone advise?Processor Type Intel P4 HT Processor speed 300 mhz RAM Memory 512 mb Hard Disk Capacity 80 Gb Drives Fitted DVDRW Graphics card memory 128 mb Viewable Screen Size 15 inches Operating system XP Home Software included No Graphics Description ATi Radeon 9200 CD Speed (CDR, CDRW, CDROM) Not Specified DVD Speed (DVDR,DVDRW,DVDROM) Not Specified Modem Yes No of USB connections 4 No of PCI Slots 3 No of Firewire Sockets 1 Sound Card Creative Sound Blaster Audigy 2 Speakers Included Yes TV Tuner No Graphics port AGPx8 3D accelerator graphics Yes Keyboard Yes Mouse Yes Weight 11 kg Height 432 mm Width 180 mm Depth 498 mm Onboard LAN No

Answer:fujitsu siemens 3700.

click here and click here

3 more replies
Relevance 72.57%

Hi

I had to use my recovery CD yesterday that came with my laptop (Amilo A 1667) because of a virus. I have succesfully re-installed XP Home but when I log on I always get a message saying could not install hardware for battery and disk drive. There is a second recovery disk for devices and utilities and the instructions say that it will start automatically when inserted but the disk drive dosen't actually appear in Windows. It is not a drive error because I can still boot from disk.

Please help I urgently need access to my computer ( I can't use the net because the wireless dosen't work until the devices and utilities is installed)

More replies
Relevance 72.57%

Does anyone know where I can get a multimedia controller for my Fujitsu Siemens scaleo 600 with Windows 7 on it please?
 

Answer:fujitsu siemens scaleo 600

Hi

In multimedia controller could you explain a little more as to what you need, as could this be the Motherboards Chipset driver that helps to run the multimedia hardware like Audi, Graphics etc or if something else please describe?


AS the Scaleo series had various chipsets installed run the below to gain us a log of your hardware, instructions for getting the log and attaching are included.





Download the free, Speccy HERE then run Speccy and click File > Save as XML, then attach the log as per instructions below, but as the forum

may not like XML docs, please pop the XML in a zip file to attach (right click the XML and choose Sent To and choose Compressed Zip Folder)

Then attach your log to your next post as per these instructions HOW TO: Attach Items To Your Post Click to expand...


Also to gain some info, do you already have Windows 7 installed?
Was this an upgrade from the original supplied Windows XP or a clean fresh install of Windows 7 (in which you would have wiped your previous Windows out)?
In Device Manager what items have yellow ! marks?


But as this is an older PC, you may not find compatible Windows 7 drivers, but we can try.
 

5 more replies
Relevance 72.57%

Hi everyone!

OK, I have this fujitsu-Siemens Scenic xL PC with a siemens D1107 motherboard and a PIII 700MHz. I was trying to overclock it to 750-800, so I downloaded the jumper settings from the official site and tried to overclock it. I set the jumpers and switches to make the CPU run a higher frequencies than normal, but it didn't change anything! The system still runs at 700Mhz. Does anybody know why this is so? How do I overclock a system like this one?

Thanks in advance!

Aweizd
 

Answer:Overclocking a fujitsu-siemens PC

You can only change the front side bus setting, the multiplier is internally locked in the chip and cannot be changed.
So if you changed it to run an 8 multiplier that's why it didn't work

You have to leave the multiplier set to 7 and adjust the 100 mhz frontside bus up

Be advised, overclocking can damage components and cause data loss. If you don't have really good cooling and memory don't try it
 

3 more replies
Relevance 72.57%

Hi could someone point me in the right direction. I have a new siemens primergy tx 150 s4 server for a customer. I need to setup the disk mirroring for the second hard disk and have been told to do this i need to convert the primary hard disk to dynamic. at the moment i cannot see the second disk. i then need to be able to access the GAM software which asks for a username and password, which i have setup, but it does not allow me access to it. I also cannot setup the alarms to alert that there has been a failure on the system.
Is there some sort of setup procedure for these servers that needs to be followed, as the technologic information you get with them is immense, and pretty hard going to read.

Any direction that could be given would be greatly appreciated.

Thanks
 

Answer:fujitsu siemens primergy tx 150 s4

Say what????
 

1 more replies
Relevance 72.57%

can any one help me find all the drivers for my fujitsu siemens i have found all this information of the board W2631-W69-X-03W26361-W69-Z2-03-36i am running windows xp pro sp3 with 1 gb ram 3.00 ghz cpu can any help me with the links please many thanks

Answer:fujitsu siemens driver help!!!!!!!!!

Have you tried here? click here Is it a laptop or a desktop?

3 more replies
Relevance 72.57%

Hi all I got the above named laptop and when I have it flat after 5 minutes it switches off u can hear the part that blows the heat out getting louder and louder then goes off but if I try to go into somewhere like william hill it will do it straight away .. so I assume it is overheating if im correct what should I do to sort this problem. .. thanks in advance
 

Answer:Fujitsu Siemens V5535

You need to remove the CPU cooler and either clean it (assuming its clogged up with dust) or replace it. It definitely sounds like its overheating.

Basically:


Turn the laptop upside down.
Remove the large rear cover.
Remove the fan housing screws, remove the cpu bracket screws.
Remove cooler assembly
Clean the fins out, blow and clean out where the fan blows the air out the side of the laptop case.
Remove thermal paste from CPU.
Add new CPU paste.
Refit cooler assembly.
Refit cover.
Picture of CPU cooler unit on your laptop is below.





Hope this helps.
 

4 more replies
Relevance 72.57%

My boyfriend has a Fujitsu Siemens E8010. Today he plugged in his Digial Camera via USB, once he had transfered all the pictures he unplugged the USB cable and the computer screen went black. You could hear the computer still running. I tried to keep my finger on the power button to reset the computer, but this did nothing so eventually we had to resort to removing the battery from the laptop. Now it dosn't switch on at all.

Sometimes removing the battery and putting it back on will cause the battery display to turn on for a few seconds and then it goes off again.

Can anyone think what has happened here? At first I thought maybe the USB had overpowered the computer, but now I don't know. It's seems like something has short circuited.

Any Help Appreciated,

Rach
 

Answer:Fujitsu Siemens E8010

9 more replies
Relevance 72.57%

After my laptop has been in standby mode I have to switch it right off before I can use it again because the function of the keys is all over the place. What can I do to put this right?

Answer:Fujitsu Siemens Pro V3515

You'll need to clarify what you mean by "the function of the keys is all over the place"...

3 more replies
Relevance 72.57%

just made a bid for this base unit - 300..it's been refurbished (by comet)i saw it on their auction site and it has a 1 year guarantee. does anyone have any knowledge of this system and at what point i should stop bidding?

Answer:Fujitsu Siemens 830019821

my mates got 1 of these for sale for about 120 minus the monitor. email me if your interested and i'll pass your details on.

8 more replies
Relevance 72.57%

my fujitsu siemens i tried to format xp its started but suddenly blank it powers up but no display and i cant open my cd rom fan working can u pls tell me hw to solve it?

Answer:my fujitsu siemens i tried to format xp its s

Is the bios set to boot from CD 1st?Are you, after putting the W7 install CD in, rebooting?

12 more replies
Relevance 72.57%

HiBought this laptop from a carboot for my children and am trying to put XP Home on it (OEM bought from ebay) but keep getting the following error:'Setup did not find any hard disc drivers installed in your computer'.I did not get any other discs with the computer.Could someone please help me with this.Am a complete PC idiot - sorry :-/

Answer:fujitsu siemens s7020

It's possible the (internal) hard disk is broken or missing.

10 more replies
Relevance 72.57%

my son's fujitsu pc is begining to fall behind with his gaming needs, now I know he would like a machine from alienware but far too expesive. Graphics and memory are cheap enough but what I need to know is, how fast a cpu will his board take? does any one know where I can find this out?just replaced my own base unit this year so I want to keep costs down, be happy if i can get 1 to 2 more years out of it.Fujitsu Siemens D1325Pentium(R) 4 CPU 1700MHz P4W (Willamette) 1.3-2G 1.7-1.75VWindows XP Home Ver 5.01.2600 SP 1NVIDIA GeForce2 MX/MX 400 64mb640mb memory

Answer:Fujitsu Siemens D1325

click here but my first thought is to replace the graphics with a reasonable card.

6 more replies
Relevance 72.57%

Good Afternoon People

I have a slight issue with my desktop PC a Fujitsu Siemens Scaleo P,

I updated to windows 7 and as a result and after much research I am unable to locate the drivers for my Network controller, wireless network card, multimedia audio controller and pci input device
I have tried the FS website however they only provide drivers for vista and XP, I would really appreciate any advice anyone could offer.

Thanks

Chris
 

Answer:Fujitsu Siemens Scaleo P

14 more replies
Relevance 72.57%

my granson has a fujitsu siemens amilo laptop you switch on the wireless by pressing fn+f1 for no reason it as stopped working is it a faulty keyboard or could it be something else its windows vista.Thankyou

More replies
Relevance 72.57%

Hi my fujitsu siemens v5535 is stating that some files are not workin and does not let u check the properties when right clicking protocol 4

Answer:fujitsu siemens v5535

Hi ba001 and Welcome to TSF,

Could you please get back to us with a printscreen of the error messages or a detailed error description containing the full error message. Also let us know When the error message appears, what were you doing when the fault occured?

3 more replies
Relevance 72.57%

Hi,Has anyone got a Fujitsu-Siemens Scaleo P pc, if so did yours come with a modem installed? I set up the above computer today for a friend, everything is ok apart from one small problem.I cannot find any trace of a modem being installed on the computer. I made a manual dial up connection for him but it says there's no modem. There's nothing showing in the Device Manager either. On the back of the tower there's only one phone socket type connection and that marked 'Lan'I looked on the spec sheet on the F-S website and according to that one is installed.Cheers, Chris.

Answer:Has anyone got a 'Fujitsu-Siemens Scaleo P' PC?

Then there is no modem Installed. ether get a External serial modem or a PCI. I would suggest a Externall if it's on Dial-Up. Look for a Hardware modem not software one

6 more replies
Relevance 72.57%

If any Users of the above Computers is not aware of the fact, they have there own forum, (similar to helproom) where lots of questions can be answered. click here

More replies
Relevance 71.75%

Hi,need some help.I have a fujitsu siemens amilo m1405,when using it yesterday screen froze so i turned it off using power button.When i turned it back on nothing but a blank screen so after turning it off and on using the power button it eventually works then it freezes again.One thing i have noticed is that when working the hard drive light flickers then when the hard drive light goes out that is when it freezes.When the screen goes blank i can access anything it just seems to be dead apart from the power light being on.Any help would be great.

More replies
Relevance 71.75%

My pc has crashed & I donn't want to use the recovery disk as I will lose all the data on my harddrive.I downloaded a boot-up floppy disk from Fujitsu site but the pc does not recognise it. The pc tries to open in safe mode but fails.It is a 1.6 ghz 256mb 40gb using XP home edition.Any suggestions much appreciated.

Answer:Fujitsu siemens Scaleo 600 PC crashed

Check the BIOS is set to boot from floppy and then try the disk you got from Fujitsu. The way to check the BIOS differs from machine to machine, but is likley to tell you to "press del to enter setup" - have a look when restarting.

1 more replies
Relevance 71.75%

Hi I have just install Windows 7, I updated the graphics driver through windows update to Via Chrome 9 HC IGP WDDM 1.1 . After restarting once Windows has loaded I can only see a black screen and nothing else.
I have had to go into safe mode and uninstall the graphics driver.
I am now running standard VGA drivers, just wondering if any one else has had this problem and if there is a solution .
Thanks

Answer:Fujitsu-Siemens Amilo Pro v3515

you shouldn't update drivers through windows update...go to the mfgr's website... i.e realtek,intel.ect

good luck

3 more replies
Relevance 71.75%

Two questions that someone with one of these or knowledge of laptops may be able to answer.1. Is it possible to boot into Safe Mode?2. For backup purposes using Acronis True Image (and for recovery using the ATI CD if necessary) is it possible to boot from the DVD/CD drive?I have read the manual and searched the Fujitsu site with no results. There are details on how to use the recovery disk on its cover but that is all.Many thanks in anticipation.

Answer:Fujitsu Siemens Amilo Pa 1510

Without knowing specific details of your motherboard, the answer is yes, almost certainly, to both questions. To boot into safe mode, tap the F8 key during the boot process and it should give you various options before it goes into Windows, including Safe Mode, Safe Mode with Networking, Normal (or something like that).To boot directly from a CD/DVD, you have to go into the bios. Switch the machine on and as it comes to life watch for a message that says "hit F8 (or whatever) for setup". Then there will be a set of options about first boot device: change yours from the C drive to the X drive (where X is the letter of your DVD drive).

3 more replies
Relevance 71.75%

I can safely say I know nothing about computers so if I get any information or terminology incorrect I apologise.I have recently restored my Fujitsu Amilo Pa3553 to factory default settings and have misplaced my recovery discs (1 of the 3 recovery discs) (Knowing nothing about computers) I tried to install Windows 7 onto the laptop from a disc. The installation appeared successful up to the point of finalization in which my computer restarted and immediately went into the Fujitsu-Siemens Computer Recovery, giving only one option, the option to restore the laptop to factory default settings again.Every time I now start the laptop it goes straight to Recovery and ignores the os I installed, if I click 'cancel' my laptop shuts down and if I click 'next' an error message appears ('document.getElementById(...)' is null or not an object Do you want to continue running scripts on this page?) followed by (Object doesn't support this property or method. Do you want to keep running scripts on this page?) The same messages repeat if 'yes' is clicked.I would like to know if there is any solution to this besides the original recovery discs or if anyone is able to copy the recovery discs for me.

Answer:Fujitsu-Siemens Recovery overriding os

factory restore restores the OS to the way it came from the factory.there should be no need to install windows 7what OS is there after the factory restore?during the win7 install did you delete any partitions?You would contact Fujitsu about replacing the recovery disks. Sounds like you need them to complete the factory restore.Answers are only as good as the information you provide.How to properly post a question: Sorry no tech support via PM's

3 more replies
Relevance 71.75%

Hello all,

I need your help once again.
This time concerning my Amilo Pro V3205
-Windows 7 Home Premium 32 bit
-Intel Centrino Duo @1.60GHZ
-1.5 GB RAM

I get BSODs at random times with it, sometimes while under "pressure" sometimes while merely browsing for files.
I attached all required files as usual.

Hope somebody will be so nice to help me out

Many thanks in advance!

Answer:Random BSOD Fujitsu Siemens

  
Quote: Originally Posted by pluffi


Hello all,

I need your help once again.
This time concerning my Amilo Pro V3205
-Windows 7 Home Premium 32 bit
-Intel Centrino Duo @1.60GHZ
-1.5 GB RAM

I get BSODs at random times with it, sometimes while under "pressure" sometimes while merely browsing for files.
I attached all required files as usual.

Hope somebody will be so nice to help me out

Many thanks in advance!



A few problems
1- old drivers

Code:
HSX_CNXT.sys 1/11/2006 7:12:47 PM HSX_CNXT.sys+a2148 0x8e118000 0x8e1cf000 0x000b7000 0x43c59eff
HSXHWAZL.sys 1/11/2006 7:12:52 PM 0x9559a000 0x955d4000 0x0003a000 0x43c59f04
HSX_DPV.sys 1/11/2006 7:13:30 PM 0x8e021000 0x8e118000 0x000f7000 0x43c59f2a
rixdptsk.sys 11/14/2006 8:35:19 PM 0x8eb13000 0x8eb64000 0x00051000 0x455a6ed7
e100b325.sys 11/16/2007 1:53:32 PM 0x8eaa7000 0x8eacde00 0x00026e00 0x473de72c
CHDRT32.sys 3/4/2008 1:31:57 PM 0x9550f000 0x95542000 0x00033000 0x47cd959d
netw5v32.sys 3/26/2009 11:10:37 AM 0x8e62f000 0x8ea42000 0x00413000 0x49cba8fd
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on ... Read more

6 more replies
Relevance 71.75%

Can anyone please help or give advice!Recently I bought a Fujitsu Siemens P6405 Desktop PC with Windows Media Centre Edition installed.Just after getting my PC I received the Windows Vista Home Premium Express upgrade disk through the post "note this computer was bought just before the introduction of Vista.I have read so many horror stories of home upgrades going wrong one of my concerns is that USB ports do not work after upgrading this would stop my mouse working and my upgrade would grind to a halt.Should I take it to PC World or grit my teeth and go for it.Ed.

Answer:installing Vista over XP Fujitsu Siemens PC

Run the Vista upgrade advisor to check any hardware and software problems, then do a clean install, not an upgrade. Don't give it to PC World to do - it's easy to do yourself.

3 more replies
Relevance 71.75%

Hey,
I've got an Amilo Pro and was just curious: is it possible to upgrade them, in terms of ram an' video cards and whatever, like y'can with a PC, or do you just stick with what you're given when it comes to laptops? Thanks for any pointers!
 

More replies
Relevance 71.75%

I have an error message in my event viewer which tells me I should get a BIOS update for my Fujitsu Siemens pc but when I go into the manufacturer's website and work through the download I end up with a page recommending a BIOS but it is all in German - I bought my pc in UK. Can this BIOS be used to replace my existing BIOS which is M6VCG ver 0110a without risking everything subsequently been in Germa?!

Frankie 107
 

Answer:Cannot get BIOS update for Fujitsu Siemens pc

10 more replies
Relevance 71.75%

Hi all.

I've installed an OEM Vista Ultimate alongside my XP.

Vista is on a separate partition and I get 2 OS options at boot (well, 3 really... read on).

When I installed Vista, it worked fine initially but after downloading the first updates it found (or says it found) a HDD error. It restarted my laptop & ran a CHKDSK which then looked as though it was deleting multiple files.

I cannot now boot Vista (it constantly loops and restarts when Vista is selected as the OS at boot) although XP runs as well as ever if selected.

I've formatted the partition & reinstalled Vista twice now with the same result: run the update, Vista finds some HDD error, restarts & then starts CHKDSK which deletes files.

Now I have a boot screen with XP, 2 Vista Ultimates, neither of which physically exist, but are still showing as OS choices.

So, my query is twofold:
Why do you think Vista is finding a HDD error when there isn't one?
How do I get rid of the 2 defunct Vista OS options at boot & revert to XP as my default OS without having to select it.

ATIA, Egg.
 

Answer:Vista & my Fujitsu Siemens M3435G

Sorry about the **Boing!** : any thoughts?
 

1 more replies
Relevance 71.75%

Hi - I am intending to upgrade the Windows Me OS I have currently to XP with SP2 - . Are there any issues I should take care of before doing so ? I have heard that I may need a bios update ? Is this true ? The pc spec : Fujitsu Siemens AMD Athlon 1.2, 640mb ram , HDD's 40Gb + 80Gb, ATI Radeon 9250 128mb with vivo, Creative SB 7.1 live.Many thanks

Answer:XP SP2 and Fujitsu siemens scaleo AMD 1200

when you put the xp cd in you can use it to check that your pc is suitable. In theory you should have no trouble the pc I am using at the moment is a pentium 3 450 with 350MB ram. XP with sp2 runs fine.

2 more replies
Relevance 71.75%

hello i was wondering if any 1 can help me out i have got a fujitsu siemens scaleo p prob 3 yrs old when i first switch on it takes about 6/7 times b4 it stays on it gives me a black screen and asks if i want to start in safe mode then when it finally stays on the fan sounds like its working overtime and it keeps crashing when i start using certain programs like for eg when i want to do video calls on live msn or when i try to play pc games
 

Answer:fujitsu siemens scaleo faults

This sounds like a hardware problem ...not malware.
I would suggest you re-post in the hardware section with as much info as possible.
Poss. causes
Heat
Bad ram
power source starting to fail
etc.
 

3 more replies
Relevance 71.75%

This morning when I powered up my computer it failed to boot. The power is on and the fan starts but nothing happened, after a while the fan appears to "wind down". I tried pressing f8 to allow start up in safe mode but still nothing. Any suggestions please.

Answer:Fujitsu Siemens pc start failure

Is the monitor working at all? Powered on and plugged in?

9 more replies
Relevance 71.75%

I have advised 2 friends to buy an FJ Amilo L7320G laptop from Currys because of the relatively good spec and the low price, the laptop seems very good now that I have it in my hands (I was given it to 'setup' by one of the 2 friends.Problem is that I cannot connect wirelessly to my wireless router.Its supposed to have software on the C: drive to install but the the wireless network card is installed and I have switched 'wireless' on and I can see my wireless network - but I cannot connect.If I do an ipconfig /all the 'Ethernet adaptter Wireless Network Connection' is showing as Media disconnected, it does have a physical address but no IP address (its the same for the wired connection, but if I connect an RJ45 cable it then works)Any ideas?

More replies
Relevance 71.75%

Fujitsu Siemens laptop aaaagh

Good evening all, got a bit of a conundrum for you to ponder.

My friend has asked me to look at his Fujitsu Siemens laptop, an Amilo M3438G, because it refuses to load windows.

On startup it seems to be starting correctly, and then the "blue screen of death" comes up, displaying the following message.

registry cannot load the hive (file):
systemroot\system32\config\software

and then returns to the startup screen.

I've tried safe mode, safe mode with command prompt and restoring but nothing seems to work.

I'm guessing he has somehow corrupted a registry entry, but I can't sort it because windows steadfastly refuses to run.

His windows XP CD is currently in the Lebanon, and his PC is with me in the uk.

Is there any way I can make a generic XP recovery disk? The only XP disk I have is one of the very first versions, and the licence is not valid any more!

Does anyone have any ideas?

Cheers

Scoobs
 

Answer:Fujitsu Siemens comp, aaaaagh!

Re: Fujitsu Siemens laptop aaaagh



I've tried safe mode, safe mode with command prompt and restoring but nothing seems to workClick to expand...

Firstly, please be more specific about the symptoms. Do you mean you can't boot to safe mode etc or that you can boot to safe mode but can't cure the problem?

Secondly what do you mean restoring? how did you try this and what happened?

Thirdly did you try 'last known good configuration' This should replace the corrupt registry hive.

Fourthly if push comes to shove you XP CD will do fine to repair things , just use your friend's key from the microsoft COA label on the underside for a repair install. You don't need a key to run the repair console, just the administrator password.


Studio T
 

15 more replies
Relevance 71.75%

Hello

I am a mum with three kids and my fujitsu siemens v5535 laptop has lost its sound ability. I have done the basic checks on the control panel but to no avail. Any ideas to options?

Thank you

Millie x
 

Answer:No Sound on Fujitsu Siemens v5535

Look in your device manager and see if you find any yellow asterisks in the list. If you find any, right-click on it and uninstall it... The line you are looking for may have to do with Realtek
 

1 more replies
Relevance 71.75%

well i just wanted to know if the asus a4964G, fujitso siemens amiloD 1845,toshiba satellite p30-133 and hp pavilion zd 8007
laptops are any good

and if so which one is the best

thanks

More replies
Relevance 71.75%

anyone? i cant find them on official site
 

Answer:need most drivers for fujitsu siemens GA-8S649MF

You might find them here
http://list.driverguide.com/list/company417/page1/index.html
 

1 more replies
Relevance 71.75%

I have been given this item to play with, it having been rejected by a repair shop as beyond repair.
This I interpreted as perhaps beydond.economical repair]
It came in its bag with the Hardrive loose in one of the pockets.
Switching it on- POST came up then - No O/S
Fair enough the hardrive is on the bench.
I had established that the bare machine functioned.
Inserting the hardrive - the Windows Splash screen then welcome came up and hung then the display moved to the left edge of the screen all squashed and distorted.
Shut the machine down and came back to it later
Switch on - absolutely dead- No POST No /No O/S/ message.
Guess what could be the problem folks.
Having successfully repaired a DEll by replacing the Hard drive with a Bare drive and installing Linux I had hopes similar for this one,but now I wonder -something more fundamental perhaps?

Answer:dead Fujitsu Siemens Amilo Pro

Tried on mains only with battery removed?

10 more replies
Relevance 71.75%

Hello i have a Fujitsu Siemens - Scaleo P, it has been fine for ages and now has decided to keep restarting all the time!! i turn it on and normally within 3 minuets it crashes and restarts, i wonderd if this had anything to do with it overheating so i changed the cpu fan applying some more heat sink paste then added a case fan and it done nothing! it just keeps shutting down before given the chance to do anything! PLEASE HELP ME!!

More replies
Relevance 71.75%

Hi there, considering getting this laptop click here Has anyone got this model or had experience of fujitsu siemens laptops??Whats their reputation like? Im trying to find a review but have had little luck, anyone seen one?!Thanks a lot, M

Answer:fujitsu siemens AMILO M1420

???

3 more replies
Relevance 71.75%

Somebody help! My Pc has been working fine for a year and a half then suddenly started making noises. It sounded like the fan and as it was out of warranty I took the cover off and cleaned all the dust out. The PC kept freezing all the time as well and now it won't start at all. You can power it up, the dvd/cd lights go on and the fans start up but nothing else happens. Is it the CPU (AMD athlon 64x2 939 socket), the RAM or the garphics card. Bit strapped for cash at the moment so I can't afford to throw too much money at the PC but really can't afford to replace it either.Does anyone have any ideas?

Answer:Fujitsu Siemens Scaleo H won't start

Can you describe any precursors to the earlier freezing.

4 more replies
Relevance 71.75%

Hi all I hope somebody can help my fuhjitsu siemens Li1705 keeps locking up if it is moved in anyway or too much pressure is put on the keyboard and surrounding area. I have downgraded to xp thinking that may cure the problem but it does not. I have read somewhere this is common problem and to reflow the graphics board solder. I hope somebody knows of another cure for this as i really don't want to cook it, I have no problem takeing it apart.

Thanks
 

Answer:Fujitsu Siemens Li1705 keeps locking up

I think I may have cured this problem now without having to cook the motherboard, underneath the large cover on the rear where the memory and wireless cards are there is a via chip at the front of the motherboard I have created some preesure pads stuck to the cover so when it screwed down it will put pressure on the chip and stops it freezing, shutting down. It worked ok for me I hope it helps anybody else struggling with the same problem.
 

1 more replies
Relevance 71.75%

Hi.I have a Fujitsu Siemens Xa3530 laptop and it has originally windows Vista.I installed windows7 on it,the only problem that I have is that I can't turn on it's wireless,
would you please help me?

Answer:Wireless of Fujitsu Siemens Xa3530

Can you please update your System specs so we can assist you better?

Have you tried to use Windows Updates to make sure you have all of the correct drivers? Normally it will find your wireless drivers aswell.

-Justin

3 more replies
Relevance 71.75%

i have installed win7 on this machine to test and it works perfectly except for the sound, Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9 is the only thing wrong when i go into device managerdriver upto date, and dont know if this is the problem but, have done some googling for additional drivers but to no avail and fujitsi have no solution, tried the vista solutions still no go. anyone who can point me in right direction which is probarly staring me in the face.

Answer:fujitsu siemens lifebook s7110

Fresh install of windows 7, only the LAN is detected/installed

* Audio - Windows Update seems to be able to pick up the audio driver.

* Finger Print Scanner - Again windows update seems to work for

* Wi-Fi - Fujitsu Official Drivers for the wireless card works (the vista one of course)

* Video - I can't get video to work though. as 1024x768 is the native res of the laptop screen, I didn't notice it until I plug it in to my monitor...
Checking device manager, its only showing "standard VGA"... I tried the new Intel Graphics Accelerator Drivers Win7 RC, but I get an error that says: "System does not meet minimal hardware requirement."

Anyone got video working? It'd be good to use more than 1024 x 768 on a 14" screen...

9 more replies
Relevance 71.75%

Somebody help! My Pc has been working fine for a year and a half then suddenly started making noises. It sounded like the fan and as it was out of warranty I took the cover off and cleaned all the dust out. The PC kept freezing all the time as well and now it won't start at all. You can power it up, the dvd/cd lights go on and the fans start up but nothing else happens. Is it the CPU (AMD athlon 64x2 939 socket), the RAM or the garphics card. Bit strapped for cash at the moment so I can't afford to throw too much money at the PC but really can't afford to replace it either.Does anyone have any ideas?

Answer:Fujitsu Siemens Scaleo H won't start

Duplicate post click here

1 more replies
Relevance 71.75%

I have a Fuijisu Siemens Senic D Desctop computer which needs an PCI modem (up till now running cable modem).The standard size cards don't fit but I am not sure what I sould be looking for or where to buy the slim size modems.Would I be as well buying an external USB modem?Any help would be great.

More replies
Relevance 71.75%

HelloThanks for taking the time to read this.My mother-in-law has a problem with her 5yr old Fujitsu Siemens SCALEO 600 system (Windows XP) - this is constanly rebooting itself, and any help would be greatly appreciated!When you power on the PC, this takes you directly to the screen where you can select the option to start in Safe/Normal/Networking Mode. Whatever option you select, the PC reboots itself again, and you are taken back to the same screen. I have tried selecting all possible startup modes, however each one causes the PC to reboot again.I have tried loading up the Recovery CD that came with the system, however this gets so far and then displays the following message on a Blue ScreenSTOP C0000221 UNKNOWN HARD ERROR\SYSTEMROOT\SYSTEM32\NTDLL.DLLAt this point the system does not respond to anything - you power this off/on again, and you are returned to the startup selection screen.Any help would be greatly appreciated!Kind RegardsAlex

Answer:FUJITSU SIEMENS PC - CONSTANTLY REBOOTING!

click here is the Microsoft explanation and how to correct it. If you can't boot into Safe Mode so that you can run sfc /scannow then take a look at this site click here to Repair Windows XP by Installing Over top of Existing Setup: which will give you a way to do a repair of XP by installing over the existing one without losing your data.

5 more replies
Relevance 71.75%

Hi all

The problem is that the CPU fan is always on and in most cases the laptop gets too hot and sometimes it shuts down without any notification. I haven't clocked it myself since I got this from my friend. So is there any way to downclock this so the CPU temperature would be lower. Maybe someone overclocked it before (that can be issue).

PS. Sorry for my English. :rolleyes:
 

Answer:Clocking Fujitsu Siemens K7600

Your laptop needs servicing and cleaning... sorry for my English, but I live in the northwest USA
 

4 more replies
Relevance 71.75%

Hello good people. New here hoping i will find my desperate help. I seem to experience problems in detecting SATA HD on XP setup. I tried all the F6 Floppy steps but my notebook controller (Intel(R) 82801GBM + ICH7M) is not listed on the f6floppy32.exe menu after pressing F6. This list contains only four1. ICH9 SATA AHCI2. 82801HEM SATA RAID (ICH8M - E)3. 82801HEM/HBM SATA AHCI (ICH8M - E/M)4. ICH8R/ICH9R SATA RAIDHow do i get this right?

Answer:Fujitsu Siemens Amilo Li 1818

click here and then type in your system Amilo Li 1818. Next on the left hand side, select "Drivers and downloads">select your Operating System>Then click on the + sign by sata and you will see the Controller 82801GBM + ICH7M

2 more replies
Relevance 71.75%

I am running Vista Home on a Fujitsu Siemens Pi2515 laptop. 120 GB Hard drive with 2GB of Memory.Was having no problems until I bought and connected a 7 port 2.0 USB powered Hub.Running from that is HP Printer, which is not switched on all the time as is a Iomega 200GB External disc drive, for back upsAlso running from the hub is a Logitech wireless mouse and a 2GB Pen Drive.The problem is that the Laptop will not power up if I turn on with the USB drive connected.Is it a common fault with Vista or Fujitsu Seimens Laptops. It gets very tiresome having to keep unplugging and plugging in the USB drive every time i switch on. Any advice or solution will be greatly appreciated.

Answer:Vista or Fujitsu Siemens Problem?

O S Is Vista Home Premium.

6 more replies
Relevance 71.75%

I have a Fujitsu Siemens Desktop computer Scaleo P. When I press F8 to boot up in safe mode all I am given is a screen to allow me to choose which Hard Drive to boot from. Is this make of computer unique in the key one presses to get into Windows safe mode and if so which key has to be pressed? Many thanks in advance for any assistance.

Answer:safe mode Fujitsu siemens

Try F10 or F11 could be any key.... a Google may help

6 more replies