Computer Support Forum

Load dll error - Can't load res_dll

Question: Load dll error - Can't load res_dll

My computer randomly started displaying this error upon start up a week ago and I have no clue what is causing it. I googled it and seen that it could be caused by a linksys wireless router, one was installed on the system before, but has been uninstalled for quite some time now. Can anyone help me correct this or at least help me figure out what is causing it?

Relevance 100%
Preferred Solution: Load dll error - Can't load res_dll

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Load dll error - Can't load res_dll

Have you checked in your Startup items to see if it's listed there? It can probably be easily disabled.
Have you ever used msconfig?

1 more replies
Relevance 106.19%

Windows XP boots with error 'Cant Load Res_dll'.

Answer:on boot up error message, cant load Res_dll

Uninstall your Linksys software & then reinstall.Uninstall Linksys softwarehttp://moourl.com/5az5j

2 more replies
Relevance 95.53%
Question: Can't load Res_dll

I'm not sure what is going on.

Yesterday, kids downloaded a game. Today....norton quit working...I have tried to unistall and reinstall but keep getting errors.

In the meantime.........this message pops up every few seconds.
can't load Res_dll

I have searched forums but find nothing here on it. If I go to search engines, I find some people are associating it with wireless routers, MS Office, and other things.

Any suggestions for this mom. Please

ETA - I found where the "smart people" around here ask for a hijack this scan so I am adding it to this CRY FOR HELP
Logfile of HijackThis v1.99.1
Scan saved at 12:13:43 AM, on 6/11/8207
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16441)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Photoshop Elements 5.0\PhotoshopElementsFileAgent.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Microsoft SQL Server\MSSQL$SOSHOME22\Binn\sqlservr.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnf.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Linksys Wireless-G USB Wireless Network Monitor\WLService.exe
C:\Pro... Read more

More replies
Relevance 95.53%
Question: Can't Load res_dll

So I just started getting an error message that says Can't Load res_dll, and every time I click OK it just comes back 15 seconds later.

It started just a little bit ago today, when I tried to install a couple of new games. I put in the disc for one, and my computer seemed to be getting slowed down by it. I took the disc out and tried the other one, and the DVD drive wouldn't even detect the game. I went back to the first one, and it detected the game, but again started slowing down my computer, eventually leaving me with the res_dll message. I restarted the computer, and since then it's persisted.

I've googled it, and found other people with similar problems, but all theirs tend to stem from either a printer they installed, or a linksys wireless router. I do have a lynksis wireless adapter, but I've never had this problem with it before, and didn't change any settings recently.

Any help would be appreciated. It's really annoying.
 

Answer:Can't Load res_dll

I would suggest uninstalling your Linksys Adapter and reinstalling it with the CD that came with it.
 

1 more replies
Relevance 95.53%
Question: Res_dll can't load

I have this coming up on my computer all of a sudden. Could you please help me to fix it??? Thanks.
 

Answer:Res_dll can't load

do a google search; seems 2 have something 2 do with a linksys router
 

1 more replies
Relevance 94.3%

I have a Dell Latitude laptop P4 running Win XP Pro and had a problem with a missing dll file (I think). I downloaded and tried to install wab32res and now I have a pop up window that displays "Can't Load Res_dll" every time I boot.

Can anyone tell me what I did wrong or how to fix this? I'd really like to make this go away...............

Thanks - Justjim
 

More replies
Relevance 94.3%

Hi-- getting this error message. I have been told it started to show up after Linksys wireless adaptor installed. WMP54G ver 4.1.

I have tried 3 different registry cleaners. No Luck.

I re-installed the Linksys driver (downloaded from linksys site) It was the same version that was on the machine already.

Linksys forums do not have a thread for this error/model combination.

and please note the error may not be related to linksys.

Thanks--

mg55344
 

More replies
Relevance 94.3%

Looking at my daughters computer which displays dialog window with message in title (Can't load Res_dll). Clicking OK or close box makes it go away for abaout 10 seconds. OS is XP Media Center SP3.Any help appreciated.
 

Answer:Solved: Can't Load Res_dll

6 more replies
Relevance 76.26%

Our users have IE 7 and 8. We keep them locked into place by pointing IE to our firewall product (tools > internet options > connections > lan settings), so that only approved sites are the ones that our people can access.In the last few days, several of them report issues with specific websites loading very slowly - load times of over an hour just to get the log-in screen to appear.Troubleshooting Steps:1.) Unchecked the "use proxy server for your LAN" under the IE menus---> Site resolves instantly, as it should---> This pointed me to the direction that perhaps the site wasn't configured for our firewall2.) Re-checked the "use proxy server" box, and specifically configured the site in our firewall---> Site continues to resolve slowly, with the same load times as before performing step 1That would normally indicate that the problem is on the vendor's end. Something may be wrong with their site. And that's the line of thought I was pursuing until I was reported back to that the users are having the same problem on other websites. These new websites they're having problems with are, and have been for a long time, configured properly in the firewall.I'm not sure what my next step is to pursue. What am I looking for now? I don't know enough about networking to figure out where to track next.

Answer:Users are unable to load websites - no error, just 1-hour+ load times for pages

Bump.

3 more replies
Relevance 76.26%

WTF?

When I start the game "DiRT", press enter, the message like that, saying, that load profile is aborted, appears. Why? What I did wrong? Is this a bug in the game? I dont want to create a new profile. I wanna go on, but I can't because of this stupid issue.

Im running windows XP SP2. 2.33 GHz / 1,98 GB of RAM / NVIDIA GeForce 8800 GTS

I have a patch 1.2 installed to my DiRT.

Hope somebody will answer.

Cheers,
S.
 

More replies
Relevance 76.26%

I have a NB100 And when it trys to boot i get Windows could not start because the following file is missing or corrupt: System32\Drivers\Ntfs.sys

I have connected a DVD drive with the product recovery disc GMR400882EN0 inside it and powered on, on booting i keep F12 pressed and I get the options for setting it to boot from HD FDD CD/DVD USB Memory, I set it to boot from CD/DVD

When it loads it gets to loading RAM image I get Error 32768 File PEBASE ISO Could Not Load.

I am suspecting faulty recovery disc? and a new one is £29.99? But the laptop is under warranty but they told me to do this.

My daughter has a Asus 904HD and once she had a problem... She had none of the poor support of go and do it yourself... Asus sent a courier very fast-confirmed pick by text-fixed-delivered back confirmed drop off by text within 5 days!!

Answer:NB100 Recovery Disc wont load - Error 32768 File PEBASE could not load

>I am suspecting faulty recovery disc? and a new one is £29.99? But the laptop is under warranty but they told me to do this.

I doubt it?s a faulty recovery disk.
The error message: missing or corrupt: System32\Drivers\Ntfs.sys could be caused by faulty HDD or another hardware component.
In your case I recommend contacting the Toshiba ASP for hardware check and new OS installation. The notebook is under warranty (as you suggested in the posting above) and therefore everything should be done for free because it?s covered by warranty

Bye

1 more replies
Relevance 75.44%

failed to load library 'd3d9.dll

Answer:can not load skype with this error failed to load library 'd

failed to load library 'd3d9.dll

3 more replies
Relevance 75.44%

I've tried scanning my friends computer with CCleaner and Spybot as well as anti-virus and nothing was solved.The computer prompts "Application Failed to Load" errors upon log in. Then a program called PhotoGallery tries to install automatically but fails repeatedly. There is no internet connection either. The wireless signal shows it is connected but it can not load any websites. Here is the HiJackThis log please be aware that I probably will not be able to get to the computer until at least Friday at the latest. So please list every step to follow in order so I can take proper and prompts action so I don't hold up anyones time.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:43:16 PM, on 8/4/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16674)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\WINDOW... Read more

Answer:Application Fails To Load Error/websites Don't Load

::Edit::Replied to the following topic about issue.http://www.bleepingcomputer.com/forums/topic14717-30.html

2 more replies
Relevance 75.44%

Started receiving this message a few months ago???? I read another similar thread that said to search hidden folders and files so here's my results:(mag_hook.dll ----- C:\WINDOWS\system32)(narrhook.dll ----- C:\WINDOWS\system32)(NeroSearchTrayHook.dll----C:\Program Files\Common Files\Ahead\Lib)(QOEHook.dll ---- C:\Program Files\eTrust Internet Security Suite\etrust Anti-Spam\QSP-5.1.18.0)(CAHook.dll ---- C:\Program Files\CA\SharedComponents\PPRT\bin)(mslhook.dll ---- C:\Program Files\Common Files\InstallShield\Ebgube\6\Intel 32) Any suggestions as to how to stop the error message? Thanks, Jill

More replies
Relevance 74.62%

ok this is gonna be a bit long but i want the details there. the issue pc is my old pc. it has windows 7 its an asus msn-la motherboard i cloned this drive and used it in my new pc. after a few months my new pc's drive died and i took the old drive from the issue pc(witch was not giving issues at this time) and stuck it into my new pc until my replacement drive came. when i got the replacement drive i cloned the drive again onto the replacement drive and then put the new drive in the new pc had no issues there. put the old drive back into the issue pc (this is when issues started) the pc booted up to the windows desktop loading screen fast but once it got there it sat there for like 5 min before loading into windows. once it loaded into windows it was un usable for around 10 min while it loaded background stuff. once it finally loads into windows if i try to open anything its still responding extremely slow. is there anything i could do to fix this or is this going to me a re install only situation? i did try to use a windows 7 disk to do a startup repair but it claimed i couldn't do it because i dident install from that disk.

More replies
Relevance 73.39%

new to this and not to good on the technical jargon..

basically i used to be able to load websites up then they stopped loading now and again and now they dont load at all.\
for eg: ebay i can go to the website search it all but click on the sign in and it just wont load.
there are other web pages which just wont load at all and just get the load thing and a blank screen.. and then time out.

ive done the AVG thing, spybot search and destroy, spyblaster.. and reset my router but stil nothing!!!

using windows xp and IE8
 

Answer:Can't load websites, or can load main page but then links don't load

How are you connected to the internet?
 

18 more replies
Relevance 70.11%

Windows Update Won't Load--gets error-"This page failed to load". My system=32 bit operating system which is Vista Ultimate.

Answer:Windows Update Won't Load--gets error-"This page failed to load"

Hello sgibbins,
Try here, people have had some good results doing this. please post your results. Good luck.


JSI Tip 2805. Windows Update 'Cannot Display Page'?

7 more replies
Relevance 64.37%

Hi, I have an out of warranty T43. when I turn it on the screen remains completely black( no backlight). If i attach a external monitor I see that the computer is just booting over and over again. Safe Mode ect dont work. The blue screen pops up after each failed start. It says TOP: c0000218 (Registry File Failure)The registry cannot load the hive (file)SystemRoot/System32/Config/SOFTWAREits log or alternate.is corrupt absent or not writable I can access the Access IBM. Through this I can save the files from the hard drive. I tried the restore. But the restore fails immediately.  Does this have the backup partition? Do i need some restore CD's? Is there a way to do this without losing the info on the computer? What step do I take now?

Answer:T43 Cant load windows, Blue Screen Registry cannot load hive, SOFTWARE, Access IBM

Hi and welcome to the forum!

Sounds like a dying HDD to me, to be certain I'd suggest burning PC Doctor for DOS bootable CD and run full diagnostic test.

Keep us posted.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Español Visit my YouTube Channel

4 more replies
Relevance 64.37%

My son is playing runescape on the web and gets this error.

System in running Windows XP SP2

any ideas? Goggle searches seem to indicate that a 16 bit program may be having issues with Xp but nothing I can place my fnger on to fix.

Any help appreciated

Thanks

Answer:Win16 subsystem load failure cannot load critical screen resources from wow32.dll

Look at this link, scroll down to Correcting the WOW32.DLL Application Error in Windows XP
http://support.mfm.com/support/troub...run/wow32.html

3 more replies
Relevance 64.37%

Hi all, I am new to this forum & I am hoping you will be able to help me with a few problems I'm having with my PC.

This seems to be an intermittant problem but it happens more often than not.

When I boot up the pc no matter who's login i use (mine or the wifes) when the desktop loads, the taskbar down the bottom is frozen. When i move the mouse over it there is just a hour glass.

Also certain programs won't load up like I-tunes or the defrag yet when i go into processes the itunes exe is showing.

Internet explorer seems to work ok.

I have Avira anti-virus & I am using Adaware, Spybot & spywareguard.

My system details are:
Windows XP sp:3

here is my hijack this log: Please help me & thank you in advance.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 20:32:51, on 07/09/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Avira\AntiVir Desktop\sched.exe
C:\Program Files\Common Files\ArcSoft\Connection Service\Bin\ACService.exe
C:\Program Files\Avira\AntiVir Desktop\avguard.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\P... Read more

More replies
Relevance 64.37%

Computer just turned off automatically today and it will not load past the begining load screen with the Alien Head load screen where you can press f2 and enter setup or f12 to boot options. I cannot load safe mode or remove the battery as it does not have any place to access it.
Windows 7. Alienware m14x.

Answer:Alienware Laptop wont load past Alien Head Load Screen

Any fans running, any post beeps? Your laptop does not have a CMOS battery. Try removing the chargeable battery and power adapter. Press and hold the power button for 30 seconds. Plug in just the power adapter and try powering up the machine again.

10 more replies
Relevance 64.37%

windows 7 just fine. It doesn't cycle, it just shuts down the one time after POST/Loading OS then after it turns itself back on after a few seconds, it goes into Windows just fine. Seems to be a unique problem as I have yet to find an answer.

This is a newly built computer and everything checks out fine besides this glitch.

Gigabyte GA-P55 USB3 mobo
XFX HD6870 gpu
Intel i5 750 cpu
Antec 650W psu
120gb SSD (primary)
640gb HDD (WD Caviar Black) data drive
 

More replies
Relevance 64.37%

Windows Xp Doesnt Wanna Load, I Gotta Restart To Make It To Load

Before the repair it didnt wanna load at all - also I have some hard drive issues ( that got cut off and came our weird , sorry)

----------------------------------------------

OK, Im gonna explain what happened step by step cause Im not sure whats important. I dont understand very much about this stuff. I hope someone more expirienced then me will help me out.

Im using windows xp proffessional version.

OK It first happened while I was surfing online, I was surfing on sites that I can say are pretty much safe, but at the same time I was running either AVG 7.5 antivurus or their AVG antispyware 7.5 (not sure which one of the two) . At some point when the scanning was on my E hard drive ( windows is on my C hard drive ) the computer froze and naturally I restarted. But windows didnt wanna start after the restart, it kept giving these messeges: windows didnt shut down properly and it asked me to choose to start it in safe or normal or etc.. mode.

I tried every type of start mode, it didnt work. Windows wouldnt load and u know that line where windows loads would move a while and then stop.....no responce no nothing. So I tried restaring several times. Same thing, widnows didnt start properly last time, choose a mode...after I choose it loaded for a while but then stopped!

So I took it to the repair, the re-installed my windows. Now when I wanna start it, it runs properly doesnt ask me to choose, windows ... Read more

Answer:Windows Xp Doesnt Wanna Load, I Gotta Restart To Make It To Load

Are you able to boot in safe mode? It seems like you might have a conflict with the program wanting to run at start up..
My first suggestion is to boot safe mode, then remove your AV.. See if that helps..
Also, do you have more than one anti-virus program installed?

3 more replies
Relevance 64.37%

I wish to continue using Google Chrome as I am most comfortable using it. However, after installing Windows 10, Chrome no longer Loads any pages. Errors will simply appear stating that the page is unresponsive. Any solutions to this issue? And yes I have uninstalled Chrome and re-installed to no avail.

Answer:Why does Google Chrome no longer load any pages? App opens but it refuses to load anything?

I'm having the same problem

2 more replies
Relevance 64.37%

I have a dell 810 laptop. I know I can reload the OS but it would have to be a clean install. I dont have all the software for some of the programs on my laptop.

My desktop wont load,but I can use task mngr to access programs.Once I do that the desktop loads as normal. Any suggestions?
 

Answer:in 2000 my desktop wont load. Must use task mngr to open programs then icons load.

Have a look here:

http://support.microsoft.com/default.aspx?scid=kb;en-us;256194
 

2 more replies
Relevance 63.96%

I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal.
First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly.
After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects. someone please help

Answer:windows 7 refuses to load and system repair wont load

Do a hardware/software reset with your BIOS:Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained to clear the software connections between the BIOS
and hardware and clear any corruption in the temporary memory.
(If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
and mouse should suffice and be the only peripherals reconnected.
Turn it on to reinitialize the software connections between the BIOS and hardware

After doing those steps, clear your CMOS by entering the BIOS (see your system manual for steps to enter the BIOS), going to the EXIT screen, and loading setup/optimized defaults.

1 more replies
Relevance 63.96%

I have always worked in Chrome. My work page won't load anymore, as of last week. I tried it in Internet Explorer, and then tried FireFox. Chrome and Internet Explorer both say the problem is with the site, not with my computer or my firewall. FireFox says the site may be busy and can't be contacted. Every other employee, including my husband's computer in the next room, can load this site.
I have tweaked my proxy settings to allow automatic connections. I have disabled Kaspersky and Ad Mucher. I have done three progressively early system restores, to times when I was able to load the web page. I have turned the computer on and off after each new fix I tried. Nothing has worked.
Any suggestions?

More replies
Relevance 63.96%

Hi there and hope everyones well. I have a Dell:

VOSTRO 1310 : INTEL CORE 2 DUO T5870 (2.
DISPLAY : 13.3" WIDESCREEN WXGA (1280X80
RESOURCE DVD : VOSTRO 1310 DIAGNOSTICS &
MEMORY : 1024MB (2X512) 667MHZ DDR2 DUAL
HARD DRIVE : 160GB SERIAL ATA (5400RPM)
OPTICAL DRIVE : 8X DVD+/-RW DRIVE INCLUD
POWER DVD 8.2 - VISTA & XP
POWER CORD : 3 WIRE 65W AC ADAPTER
BATTERY : PRIMARY 6-CELL 56W/HR LI-ION
GRAPHICS : INTEL INTEGRATED GMA X3100
WIRELESS : EMEA DELL WIRELESS 1395 (802.

The problem I am having is that my browsers will not load www.microsoft.com webpage.
I DL Hijack this and did a scan .Please see Hijack this log report below:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:55:21 PM, on 3/26/2013
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Application Updater\ApplicationUpdater.exe
C:\Program Files\3 Mobile Broadband\3Connect\BecHelperService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Nero\Nero 7\InCD\InCDsrv.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\O2Micro Flash Memory Card Driver\o2flash.exe
C:\P... Read more

Answer:Solved: Browsers will not load microsoft website but will load FB, Google etc etc

Either it's a problem server side for them, which would be an issue with your IP,
or a process/service altered some of your core system settings on your end which blocks the microsoft website for some reason....., you can try a different IP address just to make sure it's not server side for them, and then if that doesn't work I am not sure what to tell you other than reinstalling all browsers, and eventually refromatting if reinstalling browsers does not work.

IF it is an IP issue it could be something with your network, if a network admin blocked the microsoft website, or even theoretically your ISP if there was a strange issue with them, however that would be rare.
 

2 more replies
Relevance 63.96%

Greetings gurus. Internet trouble. As the title says, my mail will not load in any browser. Page load is very slow and most things time out at least once. AT&T ran line tests on DSL and everything was clean. Not sure how this could be. Speedtest was run many times and no probs. I even did some gaming which strains everything with no problems. I'm open to the possibility of a virus. Ran Avira and MBAM but haven't gone further. Strangely the wife's Facebook games are a no-go. Also, wireless devices work fine. Heeeeelp!

More replies
Relevance 63.96%

I run both IE 8 and Firefox on my Dell Dimension system. I'm having problems now with both browsers taking forever to load. This may be a virus or network problem. IE 8 just loaded now after 15 minutes (exactly - I timed it).

Details:
- Once it's loaded once, both browsers load in normal amounts of time.
- I haven't downloaded any new add-ons lately unless one browser or the other installed one in the background.
- The problem just started today after a reboot.
- I've also noticed that my network icon in the taskbar doesn't show up anymore when I first boot but by the time IE opens, it has showed up.
- Using ipconfig, I did determine that I am on the network and connected immediately after boot up (router also shows me connected immediately).
- I've tried running IE from the command line with iexplore.exe -extoff. It didn't make any difference. I don't know if this works with IE 8 though.
- When I click to open either web browser, the process shows up right away in Task Manager and remains.
- I have all the latest updates to both browsers that I know of.
- I've run a complete system scan with McAfee (fully updated as of today.)

Now I've run out of ideas on what to try. I appreciate any help!

Thanks!
Alec
 

Answer:Solved: Web browsers (both IE 8 and Firefox) won't load or load extremely slow

16 more replies
Relevance 63.96%

About 3 weeks ago, I noticed that my yahoo mail was not loading correctly.
Since then I have discovered that several websites will not load at all.

My wife's laptop with xp has no issues with the same sites.

Yahoo sites load partially displaying only text and text links.
While searching for remedies, I found yahoo answers that appeared like there might be useful information but could not get them to load either.

Two other example sites that do not load at all:
www.irs.gov
www.buzzfeed.com/daves4/the-world-isnt-such-a-bad-place

Firefox reports that they failed to load, Chrome reports that there was no data received.

I have Avast AV running, have tried clearing any and all rootkits. Tried Malware bytes, tried flushing the DNS cache. And as far as I can tell I am virus free yet nothing has helped.

I even tried looking up the IP address of irs.gov using nslookup and could not get any of the returned IP addresses to load.

I thought it may be a DNS issue, but I appear to be using reliable DNS servers 8.8.8.8 and 8.8.4.4

Any ideas as to what may be causing my system to refuse to download specific web sites?

Answer:Some sites will not load, some load partially, most are fine - browser independent

and welcome to the Forum

Will those sites open with IE?

19 more replies
Relevance 63.96%

Internet access is very slow. It takes up to 3 minutes to get a page to load, and I have to hit 'Reload' 2-3 times before a site finally loads. When it does, Firefox still shows the site as loading. This problem appeared after one of three events. On the same day, I downloaded Babylon and FoxLingo. I have uninstalled both, and removed and remaining registry entries. I also received an email from my fan site on Ning (I am an author) requesting approval for a blog post. The link took me to my fan site, but there was no blog posted. I discovered it was the usual spam for male enhancement drugs, but perhaps it was hiding a more malicious virus. I cleaned up my Ning site and notified them. I have had the problem since. I ran AdAware and AVG, and only came up with minor cookies. I also ran SDFix, including catchme, and got 0 hits. I ran Malwarebytes, which only showed the SDFix files and 2 low-level threats. I also ran HiJackThis, but the log showed nothing that should not be present. All that leads me here. I have followed the procedure in the Prep Guide. FYI-I had to run GMER 3 times. It caused my system to freeze the first two times it finished scanning, which took over 10 hours. Outside of the Internet, my computer runs other software smoothly. I have a brand new ASUS MB, 500GBHD, AMD chip and 4GB DD2 memory-less than 3 months old. I'm also running ZoneAlarm.DDS (Ver_09-12-01.01) - NTFSx86 Run by Owner at 20:04:23.79 on Tue 03/16/2010Internet Explorer: 8.0.600... Read more

Answer:Internet Sites Load Extrememly Slowly, and Don't Load Fully

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you let... Read more

16 more replies
Relevance 63.96%

I have downloaded and run ad-aware 6 and spybot s&d. I am running in XP on a PIII 600 with 256 MB RAM. Thanks for reviewing Logfile of HijackThis v1.97.3
Scan saved at 9:35:23 PM, on 14/10/2003
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\McAfee Internet Security\GUARDDOG.EXE
C:\WINDOWS\Explorer.EXE
C:\Program Files\McAfee\McAfee Internet Security\GUARDDOG.EXE
C:\Program Files\McAfee\McAfee VirusScan\Avsynmgr.exe
C:\Program Files\Common Files\EPSON\EBAPI\SAgent2.exe
C:\PROGRA~1\Iomega\System32\ActivityDisk.exe
C:\Program Files\Norton Utilities\NPROTECT.EXE
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\McAfee\McAfee VirusScan\VsStat.exe
C:\Program Files\McAfee\McAfee Firewall\CPD.EXE
C:\Program Files\McAfee\McAfee Firewall\CPD.EXE
C:\Program Files\McAfee\McAfee VirusScan\VsStat.exe
C:\Program Files\McAfee\McAfee VirusScan\Vshwin32.exe
C:\Program Files\Common Files\Network Associates\McShield\Mcshield.exe
C:\Program Files\McAfee\McAfee VirusScan\Avconsol.exe
C:\PROGRA~1\INCRED~1\bin\IncMail.exe
C:\Program Files\McAfee\McAfee Shared Components\Guardian\CMGrdian.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\MusicMatch\MusicMatch Ju... Read more

Answer:Solved: increasing delay to load programs/load webpages

Try a few of these preformance tweaks.
 

2 more replies
Relevance 63.96%

Hi,
 
Laptop is a Samsung R510 running Vista.
 
When it is switched on, it gets stuck on the Samsung BIOS load screen. The F2 (Setup) and F4 (Recovery) buttons don't work unless they are pressed straight away. But when they are pressed it says 'Please Wait', but nothing happens.
 
I have changed the CMOS battery, but it hasn't helped.
 

 
I have also taken the hard drive out and turned it on, still the same.  Each RAM stick has been tried on its own, and it is still the same.
 
Can anyone help?

Answer:Laptop Stuck On BIOS Load Screen/Won't Load Vista

Have you tried booting into Safe Mode?
 
Start tapping the F8 key immediately after pressing the power button.

5 more replies
Relevance 63.96%

Im having this issue when I go to my Music folder/library in windows there is either no album art (in this case no icons in place of the album art either to suggest if its an mp3 or what not), or it takes a really long time for the album art to load on every peace of music. I have also tried to search on google about this problem. No luck probably because I'm rubbish at searching

ill really appreciate it if someone can help me out.

Here is a screen shot about what I'm on about ---->

Text in image: Files that have no album art still have the file type icon on them.

Uploaded with ImageShack.us

Answer:Album art takes long to load or doesn't load at all in explorer.exe

Welcome aboard, ksbansal

If you dont have adequate RAM/free RAM to generate the arts, it happens. Let us know the size of your ram, and you need to run this test, too.

RAM - Test with Memtest86+

9 more replies
Relevance 63.96%

Looking for help.
I've recently completed a new build and can only get WinXP to boot, but not Win 7. First, my components:

ASUS P8Z68-V Pro MB
Intel i7 2600K
Kingston HyperX Ram, 16 GB (KHX1600C9C3K4/16GX)
GeForce 9500GT (used from prior system)
Seagate Barracuda 250 GB (from prior)
Maxtor 500 GB (from prior)
PS is 630W, not sure of brand off hand

My hard drives were previously partitioned as follows. The Seagate had a primary 100 GB boot partition with Windows 7 and the remainder as a backup partition. The Maxtor has a small 20 GB partition with Win XP (as a back up in case of primary drive failure) with the remainder of the drive used as my main data partition.

Assembly seemed to go fine but on first boot simply went to a black screen after post. I flash updated to most recent Bios and disconnected the Maxtor drive. At this point could get to the boot screen. But, no matter what option I chose (normal startup, safe mode, repair, last known working configuration), it would go to black screen with "Starting Windows," and would either hang here, or sometimes the loading animations with the colored flags would just begin to start and then I'd get a blue screen. When attempting safe mode, I would get a blue screen amidst loading drivers. At this point I put in the Win7 installation disk. Whether I select repair or new installation, it will say loading files then go to blue screen after the "Starting Windows" displayed.

At this point, I stripped ... Read more

Answer:Can't load Win7 but can load WinXP, New build, ASUS P8Z68-V Pro MB

OK, I am not following was this an existing win7 install that you expect to boot with a new mb OR did you clean install win7 with the new board?
 

1 more replies
Relevance 63.55%

This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator. Thats the message i get unless I load programs like jfk reloaded and hit check website or the check IP program i use loads it up but the firefox symbol gives me that message! I went into control panel and changed it to my default browser like I read on a read through on this problem but it changes it right back anyways and wont work so the read ups i read didn't work on a google search and I am scratching my head...Thanks!
 

More replies
Relevance 63.55%

I have HP Envy 17.3 m7-n109dx, windows 10 64-bit I got the windows blue screen, then when the windows attempted to restart a black scrren showed up, and windows did not boot. I tried several things, but nothing worked. Here is a list of what I have tried: 1. I did a hard reset. 2. I made sure the batery and the AC adaptor are not the problem. 3. I tried pressing the ESC seveal times after powering the device, but nothing happened (to load the safe mode). 4. I tried to restore the bios by pressing the windows and B keys, and then pressing and then releasing the power botton, and continue to press the other two keys. When I do that, I can see the hard drive light comes on for a few seconds, then the screen lights, but it stays blank. I contine to press the two keys for 1-2 minutes, but nothing shows on the screen. Then when I release the windows and the B keys, the screen goes dark, and the power buttoon continues to light. The power goes off if I press the power button for several seconds. I tired this several times. 5. I tried step 4, but with a USB drive. The same happened. 6. I tried pressing the power button, then the  F2 key (several times). The screen continued to be black. 7. I tried the pressing the windows key + P. Nothing happened. 8. I tried to run HP Hardware Diagnostics (UEFI) from a USB, but the screen remaind black. 9. I tried to load the safe mode from a USB, but the screen remained black. If there is ... Read more

Answer:Black screen, BIOS does not load, Diagnostics does not load

It sounds like some sort of hardware failure, possibly hard drive. You have a 1 yr warranty with HP. Scroll down on the page here to start a request for service. You will be given your contact options:https://support.hp.com/us-en/contact-hp/product/HP-ENVY-m7-n100-Notebook-PC-(Touch)/9365082/model/93...

1 more replies
Relevance 63.55%

I am trying to solve this problem on a friend's laptop. It is a Sony Vaio with Windows 7 64bit, using Chrome. Bought within the last year. I can play videos from sites like youtube, hulu, and sports sites, but when I try to play a video from putlocker, gorillavid, or other streaming sites typically used for videos like anime or tv shows the video either doesn't load (just spins) or takes a REALLY long time to load, almost like it is downloading the full video before it plays.

I borrowed another laptop from the library which also has Windows 7 and Chrome and all the videos play fine on it using the same internet connection, so it is definitely something local to this machine.

I have searched the net for three days trying to find a solution, but to no avail. I have the latest versions of flash, java, etc. I have tried older versions of flash. I've disabled the antivirus and firewall. Disabled the built-in flash plugin for chrome. I really am not sure what else to do. If anyone has any suggestions I would readily welcome them. I have tried other browsers as well and had similar issues.
 

Answer:Online videos do not load or take a very long time to load

No ideas I guess?
 

1 more replies
Relevance 63.55%

I haven't used my PC for a few days and when I came to use it I found that it was off. So I turned it on and it brings up the XP loading screen and as it starts to load it jumps to a screen allowing me to open Safe Mode with Networking, Safe Mode and Safe Mode with prompt.

It also allows me to restart from a restore point which I have tried but just repeats the process.

I have started in SafeMode with Networking.

If I turn the PC off it will restart and the red working light will run but it won't fire anything up (Monitor remains in sleep mode) and I have to wait for about 10 mins at which point the Safe Mode option will be repeated.

I have run the logs as requested and I'm happy to provide more detail in any way necessary.

Yours hopefully CWD1982
 

Answer:Windows XP won't load but then gives the option to and will load in Safe Mode

I am not finding any malware in your logs. I suggest you post in the software forum and maybe try doing a repair install.

Since you are not having any malware problems, it is time to do our final steps:
We recommend you keep Malwarebytes Anti-Malware for scanning/removal of malware. You can uninstall RogueKiller and HitManPro.
Go back to step 6 oof the READ ME and renable your Disk Emulation software with Defogger if you had disabled it.
Any other miscellaneous tools we may have had you install or download can be uninstalled and deleted.
If running Vista or Win 7, it is time to make sure you have reenabled UAC by double clicking on the C:\MGtools\enableUAC.reg file and allowing it to be added to the registry.
Go to add/remove programs and uninstall HijackThis.
Goto the C:\MGtools folder and find the MGclean.bat file. Double click on this file to run this cleanup program that will remove files and folders
related to MGtools and some other items from our cleaning procedures.
After doing the above, you should work thru the below link:

How to Protect yourself from malware!



Malware removal from a National Chain = $149
Malware removal from MajorGeeks = $0
 

3 more replies
Relevance 63.55%

I just had a friend put together a new computer for salvaging some old parts and mostly new parts. I have an antec 900 case, evga e8400 mother board, nvidia geforce 8800 gt graphics card, and two wd 600gb HDD with 4 gb ram.

I installed windows vista on one of the discs, and it started out rebooting fine, however it seems to take literally minutes to get to the vista sign in. I have a blinking cursor for minutes, than sometimes it will wake up and fully load and show the sign in. Other times it seems to just hang sometimes with blinking cursor, sometimes without.

Does anyone know what could be causing this and what I can or should do about it? other than uninstalling vista and going back to xp? vista does load quickly after signin, but the wait from hitting power button to actual sign takes forever. Thanks in advance.
 

More replies
Relevance 63.55%

Hello everyone, thank you so much in advance

i recently built my first pc and thinking it would be an epic replacment to my old one i have instead been frustrated by BSOD and cant figure it out myself so i came hear for help.

most of the times i get it i am playing something like Far Cry 3 but i occasionaly get it playing alot less demanding games like Wow or even just streaming movies.

i have corsair h100i for my cpu cooler and i noticed my asus z97-k was reading at 118c so i thought maybe that was it and purchased 4 sp120 to load my case with to increase the airflow on the motherboard but it still runs at 118c and im still geting the BSOD

i have attatched a bunch of dump files

Answer:BSOD Under heavy load and occasianaly under low load, 0x00000000124

Hello Retaliate, Welcome to Sevenforums!

..............

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800738c028, bf800000, 124}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

Processing initial command '!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck'
2: kd> !analyze -v;r;kv;lmtn;lmtsmn;.bugcheck
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800738c028, Addre... Read more

1 more replies
Relevance 63.55%

I have a very simple web page that automatically updates daily. However, very often when I view it I just get the version that is in my browser cache rather than the latest version from the web. I have to do a manual refresh from the browser to see the latest version. Not a problem for me, but other viewers of the page may not realize they aren't seeing the latest information.

Is there an HTML tag or some such that can be included in the page that will force a refresh and override any old version that the viewer may still have in their browser cache?
 

Answer:Solved: Force load of web page vs. load from cache?

7 more replies
Relevance 62.32%

When I download zone alarm free to a file and then try to install it, it just displays this message. Please help.TheZASETUP_EN.EXE file is linked to missing export KERNAL32DLL:VerifyVersioninfoAOK

Answer:load zone alarm free will not load

Which version of Windows do you have?

5 more replies
Relevance 62.32%

IE will not load any pages. After running combofix it was loading pages. After a restart it stops loading pages.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 10.0.9200.16686  BrowserJavaVersion: 10.25.2
Run by Skylude at 1:05:23 on 2013-09-15
Microsoft Windows 7 Ultimate   6.1.7601.1.1252.1.1033.18.12279.10515 [GMT -6:00]
.
SP: Windows Defender *Enabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k NetworkService
C:\Program Files\NVIDIA Corporation\Display\nvxdsync.exe
C:\Windows\system32\nvvsvc.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\armsvc.exe
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
S:\Program Files (x86)\LogMeIn\x64\LMIGuardianSvc.exe
S:\Program Files (x86)\LogMeIn\x64\RaMaint.exe
S:\Program Files (x86)\LogMeIn\x64\LogMeIn.exe
C:\Windows\system32\svcho... Read more

Answer:IE will not load any page -- after running combofix it will load them

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/507883 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

14 more replies
Relevance 62.32%

I am having trouble with internet explorer (the newest edition) When I try to open it, it opens up, my homepage wont load and everything becomes non responsive the tool bars, file menus, even the "x" to close the window wont work. It completely freezes up. Worse yet, other users on this computer are having no problem using internet explorer when they are logged on to their side of XP. Why is it that when im logged on to my user name on XP that internet explorer wont work? I need help quick as all my favourites are saved in IE and I need to access some pages very soon. Im using firefox right now, and absolutely hate it. Please help me.

thanks, help soon im goin crazy trying to figure it out.
- O

Answer:IE Wont load (will load for other users using computer)

Hi IEProblem, welcome to TSF..

what happens when you run IE without add-ons?

- Right click the IE applet on your desktop and select 'Start without add-ons'

2 more replies
Relevance 62.32%

I've just started having this problem and its killing me.

I have 2 computers. My server is running windows 2000 server, and the secondary computer is running xp Pro.

The internet was working fine on my secondary computer, and then one day, it just started becoming slow, and it would not load pages (images wouldn't fully load, some pages wouldn't load at all). If i type in a url in the address bar for IE it would load the page quickly (probably from cache), but then proceeding to click links would cause "Page not found" or "timed out" errors.

I know that i can reach these sites, i ping them and get normal responses. It seems that IE is just not displaying them properly or something. The internet on my server computer works perfectly fine.

I have 2 nic cards in the server computer, 1 recieving the cable modem, and one receiving a LAN cable from my Hub.

Anybody have any ideas? Like i said, it worked on my secondary cmputer before. Also, i hooked up another computer to my hub and the internet was working fine, and then i installed Service Pack 3 and it started crapping out like mentioned above.

This is driving me NUTS!! ahhh. please help.

Thanks
 

Answer:Web Pages Do Not Load Fully. Can't Load Some Sites

Did you try emptying your browser cache? Also delete temp files and cookies (or the cookies you don't want to keep) and see if that helps.
 

2 more replies
Relevance 62.32%

I use firefox as my browser. Lately some websites either won't load or take in upwards of 20 minutes. My virus scanner keeps catching virus's. I have run my virus scanner(CA VIRUS SCANNER), ad-aware, spybot, spysubtract, and superantispyware, they all cuaght something the first run through but now come up clean. i then browsed the forums here and found a similar post. I tried some of the suggestions there, which were to repair my network connection in the control panel, and to set firefox's network connection to autodetect, these seem to have helped but some sites are still slow particularly pogo games(my wife)pogo.com loads up fine it's the popup game windows that have the problem. thanks for any help.

Answer:Certain Websites Won't Load Or Take A Long Time To Load

Hello and welcomplease advise which windows version you are running and which version of Adaware have you used and which of spybot?when you say you are getting pop up windows, are these part OF the page you are accessing or are they signs of infection?

10 more replies
Relevance 62.32%

This problem just started happening. It only occurs on this network I have in my home. I have used multiple computers at a different house and the internet is perfect. So I am assuming I have some sort of virus on my network. I need help

Answer:Certain websites wont load, or they take very long to load.

It appears that you have already posted a hijackthis log here.Please be patient while waiting for assistance. HJT Helpers are all volunteers regardless where you post a log. While waiting for a response, you should not ask for help elsewhere or make changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc.) Any modifications you make on your own can result in system changes which may not show it the log you already posted. Further, following advice outside of that post may cause confusion for the HJT Helper assisting you and could complicate the malware removal process which would extend the time it takes to clean your computer.If you had posted your log here, similar rules would apply. We would ask that you be patient while awaiting a reply and refrain from asking for help elsewhere.If you followed any other advice already, please ensure you inform the HJT Team Helper when they respond to assist you with your log. This will help them know what has been done and they probably will ask for an updated log.To avoid confusion, I am closing this topic. If you still need assistance after your log has been reviewed and you have been cleared, please start a new topic. If you have any questions, please PM me or another moderator.Thanks for your cooperation.

1 more replies
Relevance 62.32%

This just started happening last night. Earlier that day I bought a 160gb seagate external HD at Fry's for 50 bux and was moving tons a files over to it (for about 3 hours). At one point I cancelled uploading and rebooted fine, but later that night my girlfriend did the same thing and rebooted and XP will not load... not in safe mode. I didn't install anything with the external HD as it was Plug n Play and I didn't install any new programs yesterday either...

I don't have a Win XP CD either (or boot disk). I guess my first action will need to be to buy Win XP and try a system recovery?


Is there any way to find out what is stopping it from loading?

I also switched the memory sticks with some other memory and that did nothing...

I'm at a loss :l

Answer:Windows XP won't load passed the load screen...

ap f8 when booting and from the options try
last known good configuration
if that's no good boot into the recovery console and try
fixboot

7 more replies
Relevance 62.32%

Keeps on loading the HP sign. Then turns off the laptop, then turns back on to the hp sign. Non-Stop.. I can load up the startup menu but when I press f11 for system recovery. The hp sign appears then turns off. Then repeats.

More replies
Relevance 62.32%

Hello all I am Charlie and new to the community and have  2379-rhu  T42 I can not load the last 3 drivers to this T42 with an IBM pre-load HDD with xp pro sp3. i have done all the windows updates and been to Think Advantage tool box---it just flags me the drivers are not loaded.I went to the Lenovo site and the Intel site......no joy in mudville  i went through a lot of the t42 driver issues in the forum posts, but not solved my issues (or covered them all). here is what i can gather from device manager and the net: thinkpad PM device :device instance id : ROOT\unknown\000hardware id : *len0068 UNKNOWN DEVICE:device instance ID: ACPI\ATM1100\4&61F3B4B&0Hardware Ids: ACPI\ATM1100 Network ControllerDevice instanc Id : PCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05\4&39A85202&0&10F0?Hardware IdPCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05s:?PCI\VEN_8086&DEV_4224&SUBSYS_10108086PCI\VEN_8086&DEV_4224&CC_028000PCI\VEN_8086&DEV_4224&CC_0280?GOOGLE showed me this is an Intel(R) PRO/Wireless 2915ABG Network ConnectionTHANK YOU, for any and all assistance.charlie 

Answer:can't load drivers to t42. Using an IBM pre-load xp pro sp3 hard drive

Hi Charlie,
 
I believe these three drivers should be what you need. Did you try to download and install any of these? If not try these and let us know if that works out fine or not.
 
Intel wireless driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62875
 
Atmel TPM (Trusted Platform Module) device driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-58054
 
ThinkPad Power Management driver for Windows:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
 
 
You can also use Lenovo system update to install and update your drivers without the need to download and install each one manually.
 
Lenovo system update for Windows XP:
http://www-307.ibm.com/pc/support/site.wss/MIGR-66956.html
 
-gan

1 more replies
Relevance 62.32%

wrt54gs ip page did not load when I type ip address, but modem page load instead.

Answer:ip main page did not load,but load moderm pag

Sounds like your Modem is on that IP address and your Router is on another. I thought LinkSys routers used 192.168.1.1 out of the box and most DSL modems used 192.168.1.254 and Cable modems used 192.168.100.1. Which address are you using? What kind of Modem do you have (Model Number and if it is DSL or Cable)?

2 more replies
Relevance 62.32%

it kept doing check disk on start up but got that to stop now it keeps freezing on load wont go any where but if I log on to another admin account on the cmp its fine. Its just when I go into my main admin it refuses to do any thing and I ran registry booster and it gave me tons of errors how do I fix these.

Answer:freezing on load if it does load it gives me a blue screen

Hello and welcome to the forum.

First if you can I need you to run a full updated scan using you Anti-Virus..

Next if you do not have malwarebytes, then please download it and run a full scan, here is the link and you can download the free version.

Malwarebytes

When you get the results back please let us know

12 more replies
Relevance 62.32%

I've had a subscription to the online version of USA Today since 2012 and rarely had a problem viewing it.  A few days ago, I began having a problem.  I can login OK, but the newspaper won't display.  This happens on 2 PCs, one desktop, the other a laptop.  Both PCs run Win7 Pro SP1 x64.  The problem also happens using both IE and FF.
 
Normally, I run the MVPS hosts file on both PCs.  Because I had updated the hosts file a few days ago as well, I decided to put back the default MS (blank) hosts file to see if perhaps the new hosts file was blocking something USA Today needed.  With the default MS hosts file, I got a different result as shown in the screen shot below:
 

 
 
That prompt at the bottom took me by surprise so I Googled it.  I got many hits for "load.js from loadm.exelator.com" described as a Redirect Virus.  I'm assuming the one I'm receiving is related.  I clicked on cancel.  The USA Today newspaper still did not display.
 
Any idea where this file is coming from?
 
Any ideas why I can no longer view the USA Today online?
 
I run Norton Security on both PCs.  I've received no Norton warnings about any virus.  I also ran full scans with Malwarebytes and SUPERAntiSpyware on both PCs and they were clean.

Answer:Do you want to open or save load.js from load.exelator.com?

This problem is screwy.  From about 7am-11am this morning, I was getting the same result shown in my opening post.  Then, sometime after 11am, it started working, mostly.
 
With the MVPS hosts file loaded, the newspaper displayed normally:
 

 
 
With the default MS hosts file loaded, the newspaper displays, but again with the load.js asking to be opened or saved.
 

 
I clicked on cancel.
 
Wonder how long it will continue to load properly.
 
Sure would like to know where that load.js is coming from and if it is malicious or not.  Just for chuckles, I downloaded the 1k file and opened it with Notepad.  Here is what was in the file:

document.write('<img src="https://load.s3.amazonaws.com/pixel.gif" width="0" height="0" />');

3 more replies
Relevance 62.32%

ok put a new MOBO in my area 51 m7700 to fix a not booting problem the occured from a suspecting power surge while i as deployed overseas...problem was fixed...some what. now it POST and everything but when it get to the XP load screen with the blue bar that bounces back and forth it shuts down. i try to re boot it gives the normal xp not shut down normal and the normal 6 choices i try to boot in any option(even safe mode) it repeats the problem. swapped HD, MEM, CMOS bat. when using the respawn kit(norton ghost of HD at date of shipment of CPU) i got with the cpu it will reload xp but doesn't fix the problem if i try and load a fresh copy of xp it won't even get pas tthe first portaion or the install before it shuts down.

cpu specs

pro intel p4 3.0
1024 ram
gforcego 6800 256 graphis
dual hd i 60g and i 80g non raid(prolem even exsist in RAID 1 or 0)

i am suspecting a corrupt file load somewhere in the thread but the guy fixing it suspects hardware. Help please this problemhas got me a witts end
 

Answer:Alienware won't load past XP load screen

Pay more attention to your typing...

Your going to have to strip down the system to bare minimum hardware. Set the bios to failsafe defaults, use on-board video if you have it. Remove any USB devices and any add-in PCI cards like a NIC, sound card and use only 1 stick of RAM for the Windows fresh install
 

2 more replies
Relevance 62.32%

as per title what i have tried is checking the installation media is good which it is checked it on another rig running windows 10. okay so what happens is it will go through the normal boot up procedure my rig that is, bios will post normally and then i get the windows 10 logo screen. u know where the little windows circly thing will goes around and at about the 7th time the litlte circly thing goes around my screen will freeze same goes with the installation media which i am running on a usb, so i am stumped because i cant even load from the usb to try and repair my computer. any help willl be great.
THANKS
RUBEN
I am currently in the process of trying to install windows 7 and see if that will help.

Answer:windows wil not load nor will it load with installiation media

okay well it did the same thing with windows 7 install. it will go through the loading windows files and then the little qindows logo will pop up u know the little R,G,B,Y flag which pulsates and on about the fifth pulsate it will freeze.
THANKS IN ADVANCE
RUBEN

2 more replies
Relevance 62.32%

I don't know what happened, but suddenly the services console takes forever to load, it is "Not responding" but after ~10 min it finally loads and works fine. The same happens for the Palm Desktop. Directory Opus (an explorer replacement) appears on the task manager but won't load at all. The console and palm desktop also appear in the task manager since launch. The system is 99-98% idle during all this. Other parts of the computer seem unaffected. Any ideas where to start? Many thanks,Uriel.

Answer: Certain programs taking very long to load or don't load at all.

more information on the machine plzOS specs of machineprotection programswhen did this startwhat changes have you made? hardware software?

5 more replies
Relevance 62.32%

Hello. I have been having a problem with web pages not loading for just loading as text for about 5 days. I have run every spywere removal and anti vires program i can think of. But nothing seems to find anything or fix anything. i have made a hijackthis log file but i don't have a clue what i am looking at. I have started my PC in safe mode but i still get the same problem. Any help would be fantastic as i am all out of ideas.


 hijackthis.log   10.58KB
  1 downloads

Answer:About 1/2 of all web pages dont load or load as just text.

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Relevance 62.32%

Hello, im having a problem with loading some pages on the web, some will load super fast others will load snail slow or not at all, it's a hit and miss on what pages load it's different every time. I have been haveing this problem for about a week whilst using multiple browser (FireFox,IE and Opera)

computer info:

MS Windows SP3

Intel Pentium 4 CPU 2.66GHz, 1.0GB Ram
I do maintenance on my PC often like defrag when needed , disk cleanup and virus scans and use CCleaner often

I recently did virus scan and found 4 or so viruses and got rid of them

Scanned for malware using Malwarebytes'Anti-Malware and found a few problems and took care of them

got rid of gamvance thing i had on there

I have minimal things load on startup of my pc

Any help with this problem would be great

Answer:Some Pages wont load at all and others load fine

Try running a ping to the sites that have trouble loading to see what kind of connection times you are looking at. I would also run a tracert to those sites to see if there are any places dropping the connection.

5 more replies
Relevance 62.32%

Thanks in advance for any help on this.

Windows XP SP3
Pentium 4 1.5gb ram

Recently web pages have been loading incomplete or not at all with a "sever not found message" I can click try again a few times and sometimes it will load. I have tried 3 different browsers with the same result (firefox, opera, MSIE).

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:00:32 AM, on 3/8/2012
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.17108)
Boot mode: Normal

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
c:\Program Files\Microsoft Security Client\Antimalware\MsMpEng.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE
C:\WINNT\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINNT\Explorer.EXE
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\ctfmon.exe
C:\WINNT\system32\msiexec.exe
C:\WINNT\system32\SK991... Read more

Answer:Web pages wont load or load completely

Do you have more then 1 computer connected to your modem/router? If so, does this happen on them? If not, can you connect a separate one (ex: friend's laptop) to test?

Normally when you get errors like this it's best to rule out a problem at the modem/router and provider before going crazy over trying to fix a problem (that may not exist) on your PC(s).

Also just a couple of other questions:

Who is your internet provider (ISP)?
What connection type do they use (Cable/DSL/Fiber/Fixed Wireless/Mobile Wireless)?
What is the make and model of your router and modem?

2 more replies
Relevance 62.32%

Just started two-days-ago. Mozilla 1.5.0.7 and IE 6.0.2900. I did a system restore back for two weeks to no avail as "nothing changed."

Mozilla and IE, through Mozilla, either takes long to load or no load. If it does load does so without .gifs or some links. Some links are broken. Some will load the login page fine then freeze on the next page.

The perplexing part is that it affects only a few pages but not the whole site: my hompage, Nasdaq.com; ebay.com (after the login page), espn.com takes a while, 240 sec, to load then only partially load.

Network fine, signal strength fine, I've killed Symantec, no difference. Switched to Windows firewall, no difference. Killed Adblock, no diff. Ran Spyware Doc, nothing; NAV scan, nothing.

I'm lost. Anyone have an idea?

Thanks in advance.

By the way, "It's not a tumor", said in my best Kindergarten Cop, Schwarzenegger voice.

Answer:Mozilla Freeze On Load Or No Load On Some Pages

Ive been having the same problem. Im with Virgin and they were useless with the advice they gave. Try reinstalling your modem. My line has recently been upgraded to 8.1meg from 2.2 and i think the modem hasnt quite got the hang of it being this quick yet. It seems to work for a while but my line keeps changing. At first it ran at 7.6 and the problems with pages started so i reinstalled the drivers from the disk and it shot straight upto 8.1. Its been a pain for the past few days with some sits(even my homepage of Virgin) so i reinstalled it again and all the pages now come up.

6 more replies
Relevance 62.32%

I tried another graphics card GEFORCE FX 5200 PCI CARD in thinking it was the onboard card same problem. So I did a system restore and YO it worked . I thought try another reboot , back to same problem , it goes to a black screen where it should advance in the boot sequence .Did another system restore exactly the same came up working ok untill I rebooted it and stuck again.I took out the Pci card and still had the problem . thats where I am now , anybody help please
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 2815 Mb
Graphics Card: NVIDIA GeForce 6150SE, 1 Mb
Hard Drives: C: Total - 190777 MB, Free - 169169 MB;
Motherboard: , ALiveNF6P-VSTA, ,
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled
 

Answer:xp sp3 won't load normal will load safe mode

Your graphics card may be irrelevant. My PC was working fine Thursday morning (1-Sept-2011) , I have made no equipment changes, but when I switched on Friday 2nd I get the same error as you; although it will boot if I use the "last known good confiruration" option. Have tried restoring to my AM 1-Sept-2011 configuration settings (restore point) but this makes no difference. My neighbour has also experienced an identical problem, hos worked morning of 1st sept but failed to boot in the evening; suspect a faulty update; do you have automatic Windows updates turned on? Are you using Mcafee virus protection or Firewall?
 

3 more replies
Relevance 62.32%

Hey.My computer has been operating excruciatingly slow over the past few months, and I have no idea why. I'm pretty new to computers, as far as, being able to fix them myself. I run ESET-NOD32 as anti-virus; Zone Alarm as a firewall; and Prevx. I also regularly scan with Ad-Aware SE, Spybot- S&D, AVG, and Spyware Blaster (which I don't think that I am using correctly).I followed the steps that you have outlined in the "Preparation Guide For Use Before Posting" but was unable to get the on-line scanners to work (all 3). I was using IE at the time.All my scans come up clean, but programs are loading too slow, or not at all. Here's HJT Log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:39:34 PM, on 8/31/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16512)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Eset\nod32krn.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Prevx2\PXAgent.exeC:\Program Files\Ideazon\ZEngine\Zboard.exeC:\Program Fi... Read more

Answer:Programs Slow To Load, Hang, Or Don't Load At All

Welcome to the BleepingComputer HijackThis Logs and Analysis forum DocSatan My name is Richie and i'll be helping you to fix your problems.Your version of Sun Java is out of date.Older versions have vulnerabilities that malware can use to infect your system.Please follow these steps to remove older versions of Sun Java,and then update.1. Download the latest version of Java Runtime Environment (JRE)2. Scroll down to where it says 'Java Runtime Environment (JRE) 6u2'.3. Click the "Download" button to the right.4. Check the box that says: "Accept License Agreement".5. The page will refresh.6. Click on the link to download 'Windows Offline Installation, Multi-language' and save to your desktop.7. Close any programs you may have running - especially your web browser.8. Go to Start > Control Panel double-click on Add/Remove programs and remove all older versions of Java.9. Check any item with Java Runtime Environment (JRE or J2SE) in the name.10. Click the Change/Remove button.11. Repeat as many times as necessary to remove each Java versions.12. Reboot your computer once all Java components are removed.13. Then from your desktop double-click on jre-6u2-windows-i586-p.exe to install the newest version.Download Combofix and save to your desktop:Note: It is important that it is saved directly to your desktop Close any open browsers. Double click on combofix.exe and follow the prompts. When it's finished it will produce a log. Post the entire contents of C: ... Read more

31 more replies
Relevance 62.32%

Logfile of HijackThis v1.99.1Scan saved at 5:37:17 PM, on 4/14/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\windows\system\hpsysdrv.exeC:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exeC:\Program Files\Hewlett-Packard\Digital Imaging\Unload\hpqcmon.exeC:\HP\KBD\KBD.EXEC:\Program Files\Java\jre1.6.0_01\bin\jusched.exeC:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exeC:\PROGRA~1\Grisoft\AVG7\avgcc.exeC:\WINDOWS\system32\S3tray2.exec:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnf.exeC:\WINDOWS\system32\winsplg.exeC:\WINDOWS\system32\homesec.exeC:\Program Files\Adobe\Photoshop Album Starter Edition\3.0\Apps\apdproxy.exeC... Read more

Answer:Doesn't Always Connect And Pages Don't Always Load Or Load Right

Hello,

Sorry for the delay, this forum is very busy right now.

There is a program from a company called SearchHelp, Inc. on this computer. Sentry at Home or Sentry Remote. From the information I can gather on the Internet, this is a legitimate application aimed at allowing parents control over their children's web surfing habits. Judging by some of the lines in this log it uses a proxy server and several other techniques to filter internet content. This might explain why you have trouble connecting to some web sites.

If you are the owner of this computer and installed this program, I would suggest disabling it temporarily to see whether your problems persist.

Whether they do or not, post a fresh HijackThis log along with the results of this test.

Dave

11 more replies
Relevance 62.32%

as per title what i have tried is checking the installation media is good which it is checked it on another rig running windows 10. okay so what happens is it will go through the normal boot up procedure my rig that is, bios will post normally and then i get the windows 10 logo screen. u know where the little windows circly thing will go around and at about the 7th time the litlte circly thing goes around my screen will freeze same goes with the installation media which i am running on a usb, so i am stumped because i cant even load from the usb to try and repair my computer. any help willl be great.
THANKS
RUBEN
p.s.
I am currently in the process of trying to install windows 7 and see if that will help.

Answer:windows wil not load nor will it load with installiation media

okay well it did the same thing with windows 7 install. it will go through the loading windows files and then the little windows logo will pop up u know the little R,G,B,Y flag which pulsates and on about the fifth pulsate it will freeze.
THANKS IN ADVANCE
RUBEN

1 more replies
Relevance 60.27%

I can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.

More replies
Relevance 59.86%

I'm working with a Dell Dimension C521 PC. It came with a PCI-Express video card which apparently has failed, yet the motherboard itself has on-board video. The system will boot using this video output (as opposed to the card which produced nothing) but when it finally gets to windows the auto-detect driver routine kicks in and begins to detect the video card, prompting the user to "Continue Anyway" to finish installing unsigned drivers. Unfortunately this event takes place in front of the installation of the USB keyboard and mouse (times like these I wish it had PS/2 ). Anyway, whether I boot up into Safe Mode or normal a prompt comes up about installing drivers for the on-board chipset. I can't interact with it because the driver install routine for the keyboard/mouse becomes interrupted.
 

Answer:Dell Dimension C521; USB key/mouse driver load interrupted by video card driver load

Bump. I've been thinking... the only way I think this can be fixed is if I boot from a Linux CD or something similar and delete a particular set of drivers for this video card. It can't prompt you to install any drivers if they don't exist, right? But I don't know where to go to delete such files and prevent them from automatically trying to install themselves. Any ideas?
 

2 more replies
Relevance 59.86%

Cant load windows because of a error booting.  not sure what happened but system rebooted and when I got back home the system was not loading anymore.  any help would be great.  

More replies
Relevance 59.86%

Originally Posted by mathewgx


Here's a solution for all who want to use winmail and windows 8.

The procedure is almost the same as windows 7 , but we will need a dll file.

First , we do the same procedure as in windows 7 :

a) Take ownership of winmail forder ( if you use windows 8x64 , you need to take oweneship of program files/winmail and program files(x86)/winmail). Remember to check the " show system files " before that.

b) Delete all the files in winmail forder and replace them with the windows 7 / winmail files.

c) Copy msidcrl30.dll to c:/windows/system32 folder

d) Now , we have to register the above dll. Open cmd and type : regsvr32 "c:/windows/system32\msidcrl30.dll" and press enter.

Reboot , just in case , and you're done !!



It's not working. I typed it in several different ways and nothing. Are there any spaces skipped? Are the : at the start and the " to be used? How can I get this to work? I got one error - The filename, directory name or volume label syntax is incorrect. Where do I go from here?

Answer:How do I get WindowsMail on W8 to load the MSOE to load?

How do I get WindowsMail moved to W8 from Vista to load the MSOE.dll? And how can I get that other dll to register that this forum said to install in System32. Nothing happens when I type in the command prompt, the info give in that thread. I need to get WindowsMail working on this new laptop with W8. I can't get to choose "Run As Administrator" using Command Prompt because that choice is not on the dropdown menu.

5 more replies
Relevance 59.86%

All other web pages load fine.Whenever I try to open hotmail, login, access an email, etc, it either takes an eternity or times out.????

Answer:Why does my hotmail not load / take ages to load

bump

3 more replies
Relevance 59.86%

Hi everyone. I've got a very strange problem that just began happening out of no where. When browsing the net I can no longer go to websites such as www.zone.com, I can only check my e-mail when I'm lucky and the website decides to load without displaying "the page cannot be displayed" error message. More than half of the images on everyone webpage display as not loadable little X marks, even on this website. When attempting to open random websites after searching on google for example, more than 3/4 of the web pages I click on give me the "page cannot be displayed" msg instantly without even trying to load. This problem just began recently out of no where. Windows firewall has always been off and never had problems untill now. I run Aluria Security Center and have never had problems. I also have tried adding these sites to my trusted list and it does absolutely nothing. Hope you guys can give me a solution. Thanks ahead of time.

Answer:Pages don't load, images don't load?

My computer is doing the same thing. Out of nowhere, there's a whole ton of webpages that don't work. I went to read my comics yesterday morning and Yahoo news didn't load. I'm having the same problem in both IE and in Firefox so I'm guessing it's a problem with the computer, not the browser. But I have no idea how to go about fixing it.

4 more replies
Relevance 59.86%

Hey guys,

Here's the challenge:-

Running Windows 7/XP wired by ethernet to a home router.

A lot of sites I'm visiting seem to instantly crash (website not found) and need refreshed a few times before loading up.

Sometimes they don't load from clicking a Google search, and no matter how many times I click refresh they don't work. But if I go to the address bar and hit enter, it loads!

And one or two sites that I visit just won't load at all.

What I've tried that did NOTHING:-

Fresh installing XP and 7.

Chrome, IE and Firefox.

New LAN drivers.

Flushing cache, renewing IP.

Installing a USB wifi stick.

Safe mode.

What DID WORK:-

My iPod on wifi loads them all perfectly.

If I boot up mini Linux, all sites work perfectly!

If I boot up mini XP, the sites work after refreshing a few times (even the ones that don't work at all during normal boot up).

--

Hope that jumble makes sense!

Any ideas how to fix this?

Thanks a lot!

Answer:Certain sites need refreshed to load or won't load at all

Hi and welcome to TSF try using a different port on the router ie plug the cable into port 3,try a new cable

9 more replies
Relevance 59.86%

Hi

I have a new computer. And noticed that using EBAY.. after surfing a few pages 3 - 4 pages... pictures do not display.. pages 1 - 3 seem "normal".

Next problem.. is when I log into Yahoo Towers the "Applet" do not load.

I have WINDOW XP.

Can some tell me how to fix this??

Nancy
 

More replies
Relevance 59.86%

Ok i bought these Sony DVD+R's from sams club cause i needed them. I have never had a problem like this problem before and i dont know why... when put in a blank cd it loads up just fine.. but when i burn something on them it wont.. its the weirdest thing. But i can read any other cd just fine Any ideas cause i dont feel like keeping these dvds it they arnt going to work after being burnt
 

Answer:cant load burnt CD's but can load unburn ones

8 more replies
Relevance 59.86%

A few days ago I noticed that some of webpages weren't loading correctly. It was shortly after updating Java. Web pages that I visited like Yahoo, Adobe, and Facebook started to load plain text (no graphics of any sort). The Microsoft site wouldn't load at all until I read instructions somewhere on this forum about enabling secure sites. Most other sites loaded perfectly so I figured it had to be some sort of malware that was blocking me from certain sites. I ran a lot of scans using several anti-malware and anti-virus programs. I ended up finding about 3 trojans that were removed. That didn't solved my problem though. I got fed up and decided to reformat my computer hoping that whatever was wrong with it would get fixed, it didn't. Since I formatted my computer I tried updating Windows but I kept getting an error: "WindowsUpdate_8024402C". Wouldn't work in Normal mode even after I followed the instructions given to solve the error. Figured I'd give it a shot in Safe Mode with Networking, but it still doesn't work. Now I can't access the Microsoft website again. *sigh* I've tried pinging it but my requests keep getting timed out.

After reformatting I uninstalled all the bloatware, and reinstalled updated versions of Java, Adobe Flash Player, and Shockwave (thru majorgeeks as I couldn't download them directly from their sites). I've ran more scans but nothing comes up. I'm thinking maybe there's something wrong with my winsock2 but I'm not touching it O_o. I forgo... Read more

Answer:Certain web pages won't load or will load plain

Please delete this topic as I've found it's a malware problem.

2 more replies
Relevance 59.86%

My webmaster says Windows updates are useless.  He has removed several updates from my computer.  But now, I am trying to get my computer working again after a restore from Rescue and Recovery which was caused by something entirely different. Apparently, there are no updates from Windows on my computer since early 2010....none.  Since I am not a computer geek (and my webmaster is), I'd like to get some other views on Windows updates, because I would need to install over 100 on my computer.  These are only the so-called critical updates.  So, what is the value of these critical updates I wonder? Lura













Solved!

Go to Solution.

Answer:Windows updates--to load or not to load?

you risk all kinds of malware and other securities issues if you don't keep windows & other software up to date I don't want to say anything bad about your person but they are telling you wrong
 
 
have a look in http://forums.lenovo.com/t5/Security-Malware/bd-p/Security_Malware  there is a lot of good info llook at bugbatters posts bugbatter is a security pro.





_______________________________Thinkpad R61 7733-1GUThinkpad X61T 7762-54UThinkpad X60T 6363-4GU_______________________________Did a member help you today? Thank them with a Kudo!If a post answers your question, please mark it as an "Accepted Solution"!Regards,GMAC

7 more replies
Relevance 59.86%

Help me please I have this problem with almost every site.

Answer:Pages don't load fully or don't even load at all

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/557111 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Relevance 59.86%

I just built a computer. It has an Epox MB, Athlon XP 1700 cpu, 60 GB 7200 rpm Maxtor HD, and 256 MB DDR RAM.

I have the setup floppies for both Win2K and XP. I load them and at the end it prompts me for the OS CD. I put it in the drive and press the enter button as directed and then.........NOTHING! No CD-ROM activity. This happends with both 2k and XP.

Now........I can load Win ME or lower just fine. I start the computer with a WIN98 setup floppy and choose the "start w/ cd rom support" option and then select the appropriate drive and run setup........all goes fine. After the install........it works great.......but still wont take an upgrade to 2K or XP!!??

I have no idea whats going on here...........I've built several computers and have never encountered this before!

Any help is appreciated!!!

Answer:Can load Win ME or lower - Cant load Win2k or XP???

I've been getting a lot of suggestions reference setting the bios to boot to cd rom first. With a fresh or formatted HD......how will the cd rom be able to read with no driver?

3 more replies
Relevance 59.86%

Some websites, for example:
http://www.colonialfirstate.com.au/ and
http://postbillpay.com.au

do not load in my newly installed IE7.

The error message says:

This program cannot display the webpage

Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.

What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information

But the same websites load OK in Firefox.

I have fiddled around with the security settings etc., but still no joy.

I did not have such a problem with IE6.

I also use Maxthon Browser from time to time. But since that is based on IE engine, even that will not show some websites.

Can somebody suggest a solution?

The only Firewall that I use is WinPatrol. I clean up Malware once in a while with AdAware SE.

Answer:Websites Will Not Load in IE, But Will Load in Firefox

Hello, This is not an answer to your question, I just wanted to say that 'WinPatrol' is not a firewall.

2 more replies
Relevance 59.86%

I was wondering what the difference was whether you had a program load at startup (by checking a box within the program to have it load when the computer boots) and unchecking that box but moving a shortcut to the programs executable into the startup folder on the start menu.

Is there any difference?
 

Answer:Load at Startup or Load at Starup?

7 more replies
Relevance 59.86%

Hello, I woke up this morning and tried to access the internet as normal however some of the websites I visit regularly no longer loaded. I know these websites are up as I can get onto them through my smart phone's 3G network, so I'm positive it is an issue with my computer/browser.

Here is the information provided by TSG SysInfo:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Sempron(tm) 140 Processor, x86 Family 16 Model 6 Stepping 2
Processor Count: 1
RAM: 1983 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430, 256 Mb
Hard Drives: C: Total - 80003 MB, Free - 4274 MB; D: Total - 72621 MB, Free - 11739 MB;
Motherboard: Gigabyte Technology Co., Ltd., M61PME-S2P
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
​Here is cmd ipconfig /all
Here is SpeedGuide.net's TCP/IP analyzer results:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 2013.01.29 20:24
IP address: 121.222.xx.x
Client OS/browser: Windows XP (Chrome 24.0.1312.56)

TCP options string: 020405b401010402
MSS: 1460
MTU: 1500
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 111
Timestamps: OFF
SACKs: ON
IP ToS: 01000000 (64)
Precedence: 010 (immediate)
Delay: 0 (norma... Read more

Answer:Some Website won't load while others load fine.

so I'm positive it is an issue with my computer/browser.Click to expand...

I don't know how you can be so certain, but try a different browser.
 

1 more replies
Relevance 59.86%

when i turn my computer on it says to hit F1 to continue or F2 and when i type F1 it just beeps and will not let me do it. i push F2 move something, move it back, save and then i hit F12 and finally after 800 times i get it to finally boot windows xp home sp2 for awhile then dumps me again. any ideas or suggestions would be great. my computer has been starting to act real funny by not allowing me to access things saying i dont have permission to do it. its getting real squirly. thanx in advance for any help.

Answer:During Reboot My Windows Xp Will Not Load Tries To Load My Old Me

Hi, did you set up XP on another hard drive to ME? If so you will need to go into your bios and set the hard drive XP is on to the top.

1 more replies
Relevance 59.86%

Hey Guys!

So, I've run into a bit of a problem. For the past couple of days my Internet Connection seems to be acting strange.
Sometimes i can load pages almost instantly, for example google or wikipedia, and a minute later i have a loading time of above 30 seconds for the same page.
On the other Hand, when I start a large Download and it has to run for an hour or more, it wont abort, even when I can't connect to other Websites in the meantime.

The weird thing is that this happens on every Device in my Network. I've done a ping test in this little "downtime" and half the packages timed out.
Wireshark shows that somehow I keep sending out packages but for like 15 - 20 seconds I get no response at all.

I really don't know what to make of this and would appreciate some help^^
Thanks in Advance!
 

Answer:Pages sometimes don't load or take ages to load

9 more replies
Relevance 59.86%

Right this tiny wee box loads with error message above right after Avast loads up and before Ewidothen the laptop loads as normalAcer aspire3003LMI 6months old - Windows XP Home sp2 - Avast AV -Spybot search and destroy - Adware 6 personal - Spyware blaster all fully updated, connects to the Internet via BT Yahoo Broadband through Voyager 2091 Router,the most recent installation was Ewido the resident sheild never loads and it seems to update several times a day hope you can help as it has got me stumped.thanks in advance Mammak.

Answer:Load dll hook load failed

Hi MammakI have read recently there is a problem with Ewido's resident shield loading on startup and has to be done manually.I do believe ewido are trying to fix this issue.I have exactly the same problem,but this does not worry me to much.Maybe a reinstallation of Avast and Ewido will help,Remove from add and remove programs.Good luck Ma :-))

9 more replies
Relevance 59.04%
Relevance 59.04%

Backstory (skip if you need)
I'm fixing someones laptop, It was slow and taking 30 minutes to startup, i did the usually virus scan and restarted, then it was stuck in an auto repair loop. I used a windows 8 Install CD from microscoft. None of the options in it would work, install (key doesnt match) reset (missing partition), image recovery (cant find an image), restore (no restore point), etc.
 
Used command prompt, did stuff like bootrec, bcdedit, diskpart, and chkdsk. After it ran chkdsk it finally loaded windows. I reset/reinstalled the OS completely. Fixed, restarted, running smooth. Owner said it was working great for a day, then after turning it back on it was in an auto repair loop.
 
Now
It's stuck in a preair loop, I can't even boot from the 8 CD! Have it configured in the bios, it shows the the blue windows logo then the screen goes black for 3 minutes and a blue screen flashes for 1 second saying  "Your PC ran into a problem and need to restart. Collecting some info (0% complete) search online for error: 0x000021a"
 
The weird thing is, Windows 7 disks boot fine, but it's "not compatible". And if I physically remove the HDD, it will boot into the windows 8 CD. So I put the HDD back in (while still at the command prompt) and it wont take my commands in related to the C: . I get a "System cannot find the drive specified"
 
I also tried hooking upp the HDD to my PC SATA, it shows in explorer, but just right clicking it crashes explorer.exe. D... Read more

Answer:Windows wont load, Boot CD wont load, Automatic Repair Loop

UPDATE:
 
I got a windows 8.1 disk made and it allowed me yo boot from the CD, but it's SLOOOOW, it takes minutes to load reset or w.e (none of them still work), or open the command prompt.
 
I ran chkdsk /f /r /x but it didnt help. chkdsk /r ends with:
"A disk read error occurredcc0000185
Insufficient disk space to fix the Usn Journal $J data stream."
 
Before when I ran it, I'm pretty sure it let me restart and booted into windows, not now.
 
Next I tried bootrec.
/fixmbr - succesful
/fixboot - succesfull
/rebuildBCD - Total identified Windows installations: 0
/scanOS - Total identified Windows installations: 0
 
Next bcdedit
Nothing worked "The boot configuration data store could not be opened. The requested system device cannot be found."
 
Next sfc /scannow
"There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
Then sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
"Windows resources protection didnt find integrity violations"
 
BCDBoot c:\WindowsFailure when attempting to copy boot files
 
Next diskpart - but I forgot what I did before that may have worked. All i can remember is I had to select a disk or volume, and do something with it.

1 more replies
Relevance 59.04%

I recently uninstalled and wiped all my firefox settings after installing a addon call ghostborwser (or something similar) it has a icon of Casper the Friendly ghost to represent it. It Removed all my colour and images form ALL websites visited it was suposed to be (I assumed anyways) like a 'bosskey to hide the browser/make it invisible, after the colour faded from my world I uninstalled the Addon and restarted firefox and the colour and images were still gone so I uninstalled firefox and erased all of my settings out of the Docs setting folder (Exept for backing up my bookmarks)and used ccleaner to purge the rgistery of firefox enteies to start fresh.

I then reinstlled firefox 2.0.0.14 and tried loading it I got the

"firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience."

Message restarted and got the same I rebooted and still the same message
I uninstalled and reinstalled it several times still and still get:

firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

Any ideas?

Answer:Firefox Won't Load at all get "encountered Prob. will close now" popup before it load

Have you scanned for viruses or tried downloading an earlier version?

1 more replies
Relevance 58.22%

hi guys
when i strarts my computer its facs starts runs so fast and makes noices what could be the issue
but if i press f1 to continue it goes kingd of a normal sound but it then make loud again
please help ?
Alert! Previous fan failure. Strike F1 to continue or F2 to run setup utility.
tell me it the fan fan faulty or should i apply the heat compond to the heatsink ..!

regards
 

Answer:gx280 fan makes load sound and appears error fan faliure error

if it says "fan failure" then that is what needs replacing. Thermal paste will not fix a faulty fan!
 

1 more replies
Relevance 58.22%

I get this error everytime I try to open this site.

https://qweststore.cellmania.com/qwest/starz_detail.do?itemtype=starz

"Message: Object required
Line: 1562
Char: 4
Code: 0
URI: https://qweststore.cellmania.com/qwest/scripts/cm.js"

also get this:

Message: Unexpected call to method or property access.
Line: 264
Char: 5
Code: 0
URI: res://ieframe.dll/httpErrorPagesScripts.js

using I.E. 8 / Windows XP
all firewalls are down
no anti-virus software is running (including addons)
browser security is very minimal
addons are updated (or removed) latest version of java is installed
have latest version of flash and it is added onto I.E. browser
i meet all of the minimum requirements
What happens: I enter my email address into a form and click a button that should order this Starz thing I'm trying to get. When I click, it works and works and works until I finally get "page cannot load" error.

I have tried everything I've been able to troubleshoot with (via googling) and to no avail.

Also: I just got Qwest High Speed and MSN and Live (sort of a bundle) and my pc was updated -- I.E. to version 8 and whatever else Windows updated.

If you need more information, please let me know. (I also think I might be missing some libraries.

Thank you! :-D
 

Answer:Solved: Page load error every single time w/ error ...

7 more replies
Relevance 58.22%
Question: Load Error

After formating a PC World PC for a friend and restoring the OS Win XP from the disks supplied (restore disks as opposed to the prefered OS disks, all you get from PC World). The restore files copied onto the the hard drive, but when the PC is restarted i get the message "Load Error Press Any Key to Continue). After pressing a key the same message appears.Any assistance would be gratefully received.ThanksAshes

Answer:Load Error

try this load the restore disk in cd drive and do a restore from the cd disk again do not format the hard driveJust follow the instruction that come up on screen

3 more replies