Computer Support Forum

Logging into SAFE Mode? regular Password doesn't accept?

Question: Logging into SAFE Mode? regular Password doesn't accept?

I'm trying to get into Safe Mode so I can do a proper Defrag, but I get the Windows logon prompt...problem is it does not accept my normal Password ( I have no problem logging in Normal mode).... What's up with that, would there be 2 different Passwords?

Relevance 100%
Preferred Solution: Logging into SAFE Mode? regular Password doesn't accept?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Logging into SAFE Mode? regular Password doesn't accept?

13 more replies
Relevance 90.2%

My desktop will not load when I boot regular, even if I leave it for like 15-20 minutes, if I leave it longer it may boot but I don't have the patience.
It will boot no problem in safe mode which I am using right now.

also can not uninstall many programs

thanks.
 

Answer:desktop doesn't load in regular boot, but works fine in safe mode

blackscreen said:





My desktop will not load when I boot regular, even if I leave it for like 15-20 minutes, if I leave it longer it may boot but I don't have the patience.
It will boot no problem in safe mode which I am using right now.

also can not uninstall many programs

thanks.Click to expand...

What's the exact make and model of the computer and what version (including Service Pack) of Windows are you using?
 

5 more replies
Relevance 90.2%

My desktop will not load when I boot regular, even if I leave it for like 15-20 minutes, if I leave it longer it may but I don't have the patience.
It will boot no problem in safe mode which I am using right now.

I have all of the logs here but for some reason couldn't get the malware bytes log, it saved an XML version, I thought I would be able to export it after I restarted my computer, I guess not.
 

Answer:desktop doesn't load in regular boot, but works fine in safe mode

I am probably going to send you to the software forum. But first, rerun Hitman and have it remove all that it found.
 

7 more replies
Relevance 79.95%

Hi - thanks for any help.
I am using vista small business on my work computer. When i try to use
logmein free, a remote access software, everything works fine until i am
asked by my work computer to log in by selecting my user name and giving my
password. i provide my usual user name and password, and the computer tells
me it is incorrect. I am DEFINITELY using the correct password (its not
number lock or caps, etc.) i have verified with logmein tech support that i
should be using my regular user name and password.
i also had the same problem when trying to change the password on this user
acct from the computer (i.e. not remotely logging in, but sitting in front of
it). when i am prompted to provide the current password, it tells me its
incorrect - but it is definitely the same password i use to log in normally.
any suggestions? this is stopping me from using the remote software.
thanks,
Jeff
 

More replies
Relevance 79.95%

Earlier I restored back to factory settings, no problems. But now I can't log on. ERROR MESSAGE reads Your user name or password is incorrect. I have no idea what to do

More replies
Relevance 77.49%

Some photos and mail seen only SAFE mode - - but not regular mode in BOTH Internet explorer AND Firefox. Hi for some reason I am no longer able to look at Just SOME photos on web sites on this One Win7 computer, nor See my email in Yahoo main INBOX , , , unless I am in SAFE mode. Not sure how to tell what I did wrong or if missing dlls or other settings. But does work ok just in SAFE mode. However I also get the Blue screen of death once in a while. Below is what I got when doing the "hijack scan" Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 4:09:06 PM, on 4/23/2013 Platform: Unknown Windows (WinNT 6.01.3505 SP1) MSIE: Internet Explorer v10.0 (10.00.9200.16537) Boot mode: Normal Running processes: C:\Program Files (x86)\ASUS\AI Suite II\AsRoutineController.exe C:\Program Files (x86)\ASUS\ASUS Instant On\AsInstantOn.exe C:\ProgramData\FLEXnet\Connect\11\ISUSPM.exe C:\Users\JIMMY\AppData\Local\Akamai\netsession_win.exe C:\Users\JIMMY\AppData\Roaming\SearchProtect\bin\cltmng.exe C:\Users\JIMMY\AppData\Local\Akamai\netsession_win.exe C:\UPS\WSTD\WSTDMessaging.exe C:\Program Files (x86)\ASUS\AI Manager\AsShellApplication.exe C:\Program Files\TRENDnet\TEW-641PC_TEW-643PI\WlanCU.exe C:\Program Files (x86)\ASUS\ASUS Easy Update\ALU.exe C:\Program Files (x86)\ASUS\AI Suite II\EPU\EPUHelp.exe C:\UPS\WSTD\UPSNA1Msgr.exe C:\Program Files (x86)\Nuance\PDF Viewer Plus\pdfPro5Hook.exe C:\Program Files (x86)\Nuance\PaperPort\pptd40nt.exe C:\Program Files (x86)\ControlCent... Read more

More replies
Relevance 77.49%

PLEASE HELP!
My internet will not work in regular mode, only safe mode with networking. My trading platform works perfectly in regular mode so I know my connection is ok. I have done HijackThis and have come up with this report..

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:19:52 PM, on 10/10/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Safe mode with network support
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\Big Wayne\Desktop\HijackThis.exe
O23 - Service: Automatic LiveUpdate Scheduler - Symantec Corporation - C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
O23 - Service: Canon Camera Access Library 8 (CCALib8) - Canon Inc. - C:\Program Files\Canon\CAL\CALMAIN.exe
O23 - Service: Symantec Event Manager (ccEvtMgr) - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
O23 - Service: Symantec Internet Security Password Validation (ccISPwdSvc) - Symantec Corporation - C:\Program Files\Norton Internet Security\ccPwdSvc.exe
O23 - Service: Symantec Network Proxy (ccProxy) - Symantec Corporation - C:\Program Fil... Read more

Answer:[SOLVED] Internet explorer will not work in regular mode, only safe mode w/networking

Quote:





Originally Posted by wleger2981


PLEASE HELP!
My internet will not work in regular mode, only safe mode with networking. My Norton is out of date as well, but as soon as I get back up and running I will install a newer version..ANy help on this matter is greatly appreciated..




Please do not post your Hijack this logs here. Due to Forum Rules we cannot assist in malware removal here. Have you tried a different browser (Chrome, Firefox etc)? When you say IE only works in Safe Mode with Networking, Do you mean you boot the computer normally and use IE (safe mode) or are you booting the computer into Safe Mode with Networking? In other words you can't boot normally?
If you feel you are infected, please click on the Virus/Trojan link in my signature and post there for more help.

4 more replies
Relevance 77.49%

Hello,
I have this problem with my laptop - sometimes I cannot login - after choosing the user the screen freezes or after logging in it works only for a few minutes in regular mode (I can do things over those minutes like open firefox, but I cannot open folders, sometimes I can open the task manager or even some programs) but then it freezes and I have to shutdown the computer manually by pushing the power button. When I tried pushing crtl+alt+del I got a message "The logon process was unable to display security and logon options when ctrl+alt+delete was pressed. If the operatin system does not respond, press esc or restart the computer by using the power switch". I don't know if this helps, but I try to add as much as I can. Sorry it it's not relevant - my knowledge about computers and IT is minimal.
The computer runs fine in safe mode.
So I tried system restore to a week before when the computer was still fine and it didn't work. So I reinstalled a graphics driver (Intel HD Graphics Driver) as I found on the internet that similar problems got fixed by reinstalled videocard drivers. And it worked, everything started to run smoothly again in the regular mode. As normally I allowed windows updates and after restarting my computer, the problems came back.
I assumed that the problem was the updates so I uninstalled most of them (KB2930275; KB2923961; KB2925418; KB2929755; KB2929733 and KB2918077) but the problem was still there and I was unable to unin... Read more

Answer:Solved: Computer freezes in regular mode but works in safe mode

7 more replies
Relevance 77.08%

Just a general question:1. When doing a routine scan for viruses and malware, etc. (and just generally speaking), is it better to scan in safe mode or regular mode? 2. If you scan in safe mode, is there anything that wouldn't show up (that you could potentially miss) that *would* show up in regular mode? 3. Or is safe mode just better all around, and everything is covered (plus more) that you'd find with scanning in regular mode?(I'm referring to scanning with AVG A/V, AVG Anti-Spyware, SpyBot (old version), and Ad-Aware SE.)Thanks!

Answer:Better To Scan In Safe Mode Or Regular Mode For Virus/malware?

Safe Mode is a troubleshooting mode designed to start Windows with minimal drivers and running processes to diagnose problems with your computer. This means some of the programs that normally run when Windows starts will not run.The Windows operating system protects files when they are being accessed by an application or a program. Malware writers create programs that can insert itself and hide in these protected areas when the files are being used. Using "Safe Mode" reduces the number of modules requesting files to only the essentials to make your computer functional. This in turn reduces the number of hiding places for malware, making it easier to find and delete the offending files. Using your anti-virus and anti-malware tools, in "Safe Mode" also speeds up the scanning process. Read "Beginners Guides: Windows XP Safe Mode Explained" and "What is 'Safe Mode' used for and why?"

4 more replies
Relevance 77.08%

I was shocked when I downloaded TFC.EXE and installed it on my computer AND installed it on my friends computer too from THIS website.now we BOTH have the SAME problem. ha ha I boot to regular mode and nothing works. rightclick on taskbar and then click on taskmanager it stops. doubleclick on AOL or mirosoft update and the hourglass goes around forever. I tried to print something and the printer is gone.I cannot start adaware or avast. sometimes the taskbar loads but most of the time in does not. it is getting worse.. I hope you can help get this thing running.
windows xp home 32bit sp3 thanks again SAL

Answer:runs good in safe mode.nothing works in regular mode

Can you boot into Safe mode with Networking?You said that nothing works. Please offer more description, what does not work? Can you run or install apps?If you can get into safe mode with networking try a boot scan with Avast and post the results. (Make sure that Avast is up to date first)See here if you need help getting to Safe Mode.

11 more replies
Relevance 77.08%

Hi, I'm having some problems fixing my bleeping computer (Windows 10 desktop computer, to be specific) and could use some assistance.
 
On Friday 15 December 2017, my computer ran fine when I woke up and used it for a few minutes in the morning. Before that date, I had very few problems with my computer running; the biggest issue was some freezing occurring while playing games demanding on processing power such as Civilization 5. However, I don't believe that is related to my current issue, as I last played it on Sunday 26 November 2017, and I had no issues with it on that day.
 
When I returned home later that day (15 December), I found my computer stuck on a blue screen. I'm not sure quite what happened, as my computer was not used during the day at all. I restarted several times, but I was not able to even make it to the user login screen before getting a blue screen. I've received error code 0xc0000142 for every blue screen.
 
Startup repair did nothing to resolve the situation. I am still able to run my computer in safe mode with networking and that's how I'm writing this post. For the past two weeks, I've been using safe mode to use my computer. I've looked online for solutions, but haven't gotten much. I've had some problems in safe mode with random freezes, but at least the computer runs most of the time, although with limited functionality.
 
My research led me to trying Windows + R and opening msconfig.exe and disabling all services that were not... Read more

Answer:BSOD - Computer runs in safe mode, not regular mode

If you work OK in Safe Mode - but not in normal mode, it's most likely a software problem.
Hardware problems are possible, but nowhere near as likely as a software problem.
 
First thing I'd suggest is trying a clean boot.  It's similar to Safe Mode - but works in normal mode by disabling stuff.
It's also similar to disabling the services - but you'll disable more when doing a clean boot.
If a clean boot fixes the problem - then the problem was caused by one (or more) of the things you disabled for the clean boot.
Then it's just a matter of re-enabling things one at a time until you find the problem.
Perform a Clean Boot:  http://www.thewindowsclub.com/what-is-clean-boot-state-in-windows
If that stops the problem, then re-enable things a few at a time until you figure out what's causing it.
Then uninstall the problem program (from Start...Settings...Apps...Apps & Features - if you don't find it there, check the right sidebar for Programs and Features and see if you can remove it from there).
 
Backup your stuff now.  There's no telling exactly what the problem is - so a backup is the best way to be prepared in case the system dies on you suddenly.
 
If this doesn't work, then post back and we'll ask for some reports to try and figure out what's going on.
Good luck!
 

 

1 more replies
Relevance 77.08%

This is a follow up to
http://www.bleepingcomputer.com/forums/topic403398.html

SweetTech just helped me clear out some malware and referred me to this forum when I ran into some interesting issues with Safe Mode:

1. I could not log into safe mode as administrator, it stalled at "getting personal settings". I am able to log on with as my regular user though.

2. In Safe Mode my C drive has 2 Gigs more of free space than in regular mode (is that normal? I though what's on the drive is on the drive no matter what mode I use...)

I have an HP Pavilion Laptop running WinXP SP3.

Many thanks for your input and advice!

Answer:Difference in disk space between Safe Mode and Regular Mode

In Safe Mode my C drive has 2 Gigs more of free space than in regular modeHow are you reading this , or from what program.I think this is only due to being in Safe Mode and in Safe mode you are not using all processes compared to Normal mode.Is the first item an issue for you, then you could have asked S /Tech during her help.Thank You -

7 more replies
Relevance 77.08%

Hi all!

Today I started up my computer (an XP machine running SP3) and after it went through the BIOS, it showed the Windows startup screen (the Windows logo with the blue progress bar), but when that was done, it went to a black screen and won't do anything else.

I restarted and tried a few different things; Start Windows Normally, and Last Known Good Configuration both got me the same black screen.

CheckDisk ran, and it made it to the end, but froze when it said "please wait while your computer reboots" ... after waiting more than 10 minutes, i hit reset and tried to reboot it myself. It did the same Bios-Windows-blackscreen thing as before.

I also tried booting into Safe Mode, which DID work, and when I got in there I tried to do a System Restore (two, actually... for two previous dates) but both did nothing to resolve the problem. I tried simply copying my "important" files to my external HD (which it sees), but it won't copy in Safe Mode

When loading in Safe Mode, the driver list pauses and says "press esc to cancel loading of SPTD.sys" but I've tried it both ways and it doesn't make a difference that I can see.

I tried using my XP CD to boot from, which takes me into the Recovery Console, and I chose to hit "R" to repair, but when it asks me what drive I want to login to (which is C:) I don't really know what to do from there. I haven't booted from a CD before, so I assumed it would run a "Repair Wizard&... Read more

Answer:XP won't load in regular mode (black screen), but will in Safe Mode

Just to clarify, I don't really care if the XP installation is fixed, I just want to know if there's a way to get the files off the HD onto an External USB drive. There's gotta be a way... right?

3 more replies
Relevance 77.08%

Hello!

I have a Toshiba P100 - 347. And yesterday I entered password and now when I turn on the computer, it doesn't accept. It appears Setup inform: invalid password.
It's just after turns on, after appears The Toshiba logo.

Can someone help me?

Answer:Satellite P100-347 doesn't accept BIOS password - It appears: invalid password

Hi

You have used simply a wrong BIOS password. Either you have mistyped, mixed some letters or for example the caps lock buttons was enabled.
Please check these possibilities.

By the way; it?s not possible to bypass the unknown BIOS password by yourself.
If the BIOS password in unknown you will have to contact the ASP in your country to unlock the computer and to delete the BIOS password.

3 more replies
Relevance 76.26%

when i turn my computer on im not able to get on the internet, or access my networking in the control panel. If i go in to safemode with networking i can access the net no problem, just cant figure out why it runs super slow and i cant access the net in regular mode.
 

Answer:my internet is not working in regular mode only in safe mode

something is blocking in normal mode - it could be firewall/security suite

what firewall/security suite do you have ?

moved to networking forum
 

3 more replies
Relevance 76.26%

"http://www.bleepingcomputer.com/forums/topic473449.html"
hello. When It is startup up in regular mode I have to move fast, I got it to run sfc /scannow this morning. I tried to system restore but the only restore point is today.the calendar won't to last month. So thats out. still when I double click on a program or internet explorer the hourglas stays there forever. Any ideas would be great.. thanks SAL

Answer:works OK in safe mode but regular mode. nogood

well, thanks anyway. but too late. now I can't do anything in safe mode. There is CDP1 On bottom left of taskbar. When I try to do anything it says An access denied error was retured while attempting to change a service. And also now It says the operation could not be completed due to low memory or harddrive space. I have plenty of both. SAL

6 more replies
Relevance 76.26%

I started getting BSOD's right after login after boot up. I get a number of different ones and occasionally some repeat. When I come up in safe mode (with and without networking) I can function as long as I don't do too much. I've drive tested my system drive and I also did a memory test. I've also not made any changes recently. If I do too much it will BSOD though. When I start copying files off my system drive to my storage array, I BSOD if I'm doing more than a couple gigs.

I can't seem to get a consistent BSOD. I've listed most of the ones below, I haven't caugh them all.


Any help is appreciated and thank you in advance.Memory Management with Stop 1a
Cache Manager with 0x34 I think
Stop with 0X24
Stop with a 0x7f
Page fault in non-paged area with a Win32k.sys
got 2 more new ones today
special pool detected memory corruption 0xC1
pfn_list_corrupt 0x4E
Going to add new dump in reply here in a bit.

Answer:Different BSOD's upon login in regular mode and in safe mode

Lots of crashes but they are not showing any probable cause.

Do these, as a test:

Free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Stop nVidia automatic driver update:
Open nVidia control center.
Help> Updates. It will open the nVidia updates window.
Click the preferences tab.
Uncheck "Automatically check for updates"
Apply > OK.
If the crashes continue to occur after doing these, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip


If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode.... Read more

3 more replies
Relevance 76.26%

I RECENTLY PREFORMED SYSTEM RECOVERY ON THIS MACHINE
I AM CURRENTLY USING MY BROTHER'S LAPTOP BECAUSE THE ONE THAT NEEDS FIXING CANT ACCESS THE INTERNET.

# Version of IE (Internet Explorer) - Internet explorer 8
# Operating System - Windows XP service Pack 2
# What you have tried - Calling HP tech support and my ISP(Verizon FiOS) tech support.

# What the problem is - I CANT access websites like google or yahoo or anything with internet explorer even though my ISP is perfectly OK and everything is connected, and it says in network conncections i AM connected to the internet via highspeed LAN/Broadband. I noticed that when i turn my router on and off a message comes up and its says my IP has to be fixed or something. With the FiOS tech support they said i pinged everything fine and that i could go on google and yahoo via the command prompt but for some reason i couldn't in internet explorer. in my internet options i went to connections and i just ticked the auto detect under LAN settings and nothing else.

screen shot: http://tinypic.com/view.php?pic=r216z5&s=5

ALSO when i reboot in safe mode networking i dont even have to do anything it just automatically works in the browser and everythings fine except im in safe mode.

ALSO ALSO i think it somehow is windows media center version or something.. im not positive. when i open CCcleaner it tells me i have windows service pack 2. would media center affect this problem at all?

The HP tech guy said it was ... Read more

Answer:IE works in Safe Mode networking, but not regular mode.

did you try another browser to see if it is a browser issue or something else?

6 more replies
Relevance 76.26%

I am running vista 64bit after my son in law tried to install a game on my computer it started locking up. I can boot into reg mode and everything is fine for about three minutes, but then it locks up and nothing works except the mouse pointer moves but you can't click on anything or type. When I boot into safe mode with networking everything seems fine, I can get on the internet and do anything you can normally do in safe mode.

Answer:computer freezes in regular mode but not safe mode

Have you tried a system restore yet?

4 more replies
Relevance 76.26%

My computer is a HP Probook 4710s running windows xp professional w/ SP3
When I started it up it was very slow, did not make the chiming welcome sound and none of the icons or taskbar came up.
I hit ctrl+alt+del and explorer.exe was there but clearly not doing anything.  Only 21 total processes were running.  I rebooted in safemode and all of my icons appeared.  I tried a system restore but it did not work.  I can reboot in safemode with networking but the following error message appears.  "Runtime Error!  Program  c:\ProgramFiles\Hewlett-Packard\IAM\Bin\AsGHost.exe    This application has requested to terminate in an unusual way. Please contact the applications support team for further infomation."  I had contacted microsoft's tech support who thought the problem might be a corrupted user profile, so we attempted to create a new one and copy the files over to it, but the copy never worked and would fail part way through saying, "cannot access files" and then stop.  So those profiles were deleted and now I'm back to not being able to boot up with just the plain old default ADMIN user.  I don't want to shut down my computer since I'm worried if I do, it will stop booting up in safe mode too.  It's done that before, it cycles through all the files and then hangs up for about 3 minutes and automatically reboots.  Any suggestions?

Answer:Can only boot in safe mode no icons in regular mode

Duplicate, I moved your earlier post to Am I Infected...please pursue that topic and do not start another topic on same issues.
 
http://www.bleepingcomputer.com/forums/t/492515/windows-will-not-start-up-properly-system-restore-not-working/#entry3033303
 
This topic is closed to avoid confusion.
 
Louis

1 more replies
Relevance 75.03%

We had a power outage recently and even though the backup kicked in, our MS Outlook 07 (running on XP Pro) will only open in Safe Mode with limited features. When I reboot, I get an error message saying Outlook wasn't closed properly. It will not load at all unless I click on the offer to operate in safe mode. How do I get the system to function normally in regular mode with full features again? I'd appreciate any how-to help anyone can provide. THANKS!
 

Answer:Outlook 07 Safe Mode vs Regular Mode

Reinstall. It has been too badly damaged. Your settings have been preserved as has your mail, in most cases... but it is still wise to use Outlook recovery software (see www.majorgeeks.com and others) before you perform the reinstall... your files in process at the time of the failure are likely lost.
 

6 more replies
Relevance 75.03%

My mother and I share a network, and both own Compaq Presarios from the dark ages . She is running XP and I'm running 98. I caught a virus (pretty sure it's Virtumonde) and I'm taking steps to deal with it. This is not about my problem... unless it's her problem, too.

She recently bought a laptop (which runs Vista) and is networked into the same system. For this laptop, she purchased ESET NOD32 Antivirus4. When she heard about my problem, she thought that it might be a good idea to install this same program to her PC before I reattached to the network to fix my problem. So we did that. Unfortunately, we didn't heed the extremely mild warning that there "may be conflicts" with the McAfee already on her system, and neglected to uninstall it.

As soon as I was finished with the uninstall, I attempted to enter the Add/Remove Programs menu to remove McAfee. It told me to wait while it populated the list, and ten minutes later, I gave up. The computer had frozen, so I did a hard shut down... and have not been able to do anything since!

We can restart it, sure, but it freezes somewhere between the time it launches McAfee and the time it launches Eset - any attempts to do anything either fail or cause the freeze. We of course tried booting in safe mode, but cannot get the options screen (we tried the tapping and holding methods for both F8 and F5).

Incidentally, her computer's symptoms do not resemble mine in the slightest.

So here are my que... Read more

Answer:No safe mode, regular mode crashes

As soon as I was finished with the uninstall, I attempted to enter the Add/Remove Programs menu to remove McAfee.Do you mean "As soon as I was finished with the installation, I attempted to enter the Add/Remove Programs menu to remove McAfee." ?-----------Safe Mode: After you press the ON button, start tapping the F8 key ... and keep tapping .... until you are presented with the "Windows Advanced Options Menu". Try that please.Try F10 if no luck with F8.

5 more replies
Relevance 75.03%

when i boot my laptop in safe mode my internet speed is high but when i boot in regular mode its low im wondering if anyone can help me with stopping the right programs for regular mode so my internet speed is high like it is in safe mode
 

Answer:booting in safe mode and regular mode

6 more replies
Relevance 75.03%

why?!?!? i tryed a lot of stuff but nothing ever works

Answer:why can i go on the internet in safe mode but not in regular mode?!?!?!?

You might be experiencing a sever infection or a system corruption ( the files that dont run in safe mode but real mode might have been corrupted such as drivers ) but these are all assumptions right now. Please get into safe mode with networking. Click on greyknights link below and follow the instructions for a malware clean-up. Get a hjt log and post it under hjt log help forum. Lets see what happens. Let us know.

regards.

5 more replies
Relevance 75.03%

Hi i have been having problems with my 5 year old computer for maybe 6 months, and I have some serious problems with it. One problem is, when the computer started up, it makes this click noise, like someone pushing a button. Me being a complete amatuer, ignored it until finally it totally effed up my computer. My computer wont go into windows xp, it wont even go to safe mode. I can only go to the system restore screen, and i cant even restore my computer since it says " cannot format user portion !" Any help?

I already have all my info stored on a network, so i dont mind like wiping it totally clean, I really just want to delete some stuff on there. (some games and some programs, cuz of serials) please help^^
 

Answer:No safe mode, No regular

That clicking noise is probably a sign your hard drive took a dive, along with your symptoms, and you need a new one.
 

2 more replies
Relevance 74.21%

Whenever I try to boot into xp, one of two things happens.
I try to boot into normal mode or last known good config, and it goes to the login screen, I click on my account, it shows just the desktop, no icons, just the wallpaper, and then goes back to the login screen.
This repeats everytime I click on my account login.

When I try to boot it into safe mode, it flashes something about realtek boot and asks me to hit shift and some other variety of keys but then it disappears as soon as I have a chance to fully read it, it just loops back to the mode select screen, I don't even get to the login screen.

What should I do?
 

Answer:can't boot into regular or safe mode

9 more replies
Relevance 74.21%

Hi all,

We were recently having issues with the new versions of Silverlight. My girlfriend tried to download an older version. Apparently the sight she tried to download it from was rogue. I tried to uninstall it (Silverlight) without success. I thought if I went into safe mode, I might be able to get rid of it that way. However, I was not able to boot into safe mode. The computer just went to black screen. I was able to reboot in normal mode by turning off the computer and restarting so I went into msconfig and checked the system boot box in an effort to force reboot in safe mode. Now it wont boot in normal or safe mode. (black screen) If i could uncheck the system boot box, the computer would not be trying to boot into safe mode, so it seems Iím stuck there. Any thoughts?
 

More replies
Relevance 74.21%

Hi,
 
I think I may be infected or something. My computer won't open in regular mode, it's eventually goes to a black screen. However I can open in Safe Mode. Any ideas if this is an infection or just a malfunction with the lap top?
 
Thanks,
Ted

Answer:Won't let me open regular way, only in Safe Mode

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to t... Read more

15 more replies
Relevance 74.21%

I woke up and my monitor wasn't working

on the screen, it'll just show "digital" for a few seconds, then switch to "analog" and it'll continue to switch back and forth. I tried powering the monitor on and off, and restarting the computer. no luck.

however, if I go into safemode, everything works just fine.

it's a Samsung Syncmaster 910t. any help would really be appreciated
 

Answer:lcd works in safe mode, not regular. help !

in safe mode windows uses a vga driver - maybe you have a problem with the video driver.
have you checked the device manager in safe mode.
you may want to try updating the driver - and/or display driver
 

1 more replies
Relevance 74.21%

I purchased aan estimating program that runs in safe mode but NOT in regular mode. What gives??

Answer:runs in safe mode but not in regular

Why not send it back?See event logs for clues. 1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.

2 more replies
Relevance 73.8%

I enter the right password but it doesn't accept it. Please help.Thanks in advance 

Answer:Laptop doesn't accept my password

Hi, It may be worth trying the following to rule out a possible error with the keyboard input configuration. At the log on screen, click the Ease Of Access icon in the bottom right corner, select On-Screen Keyboard and try entering your password using this. Another thing to try, if you normally sign-on with an email and password, would be to see if you can reset the password via another PC from the Microsoft page on the following link.  https://account.live.com/password/reset Otherwise, a further option would be to reset the notebook to its 'Factory Condition' and then set it up again from the beginning ? if you haven't created your Recovery Media yet, the notebook will have shipped with a Recovery Partition which can be accessed at boot - ie shutdown the notebook, then start tapping away at f11 as soon as you power on. A full guide on this can be found on the following link. http://support.hp.com/us-en/document/c04758961 Regards, DP-K

1 more replies
Relevance 73.39%

I have been having the same problem I think. Using wireless I can connect in safe mode but not regular. When I try to connect it say's page cannot be displayed. It shows the internet is connected but it will not connect. I am able to connect to my wireless network with my phone and it works fine. Toshiba said since the laptop connects in safe mode that there is a program blocking the connection and that program needs to be found. I did not want to pay them $100 for a 1 time fix. So here I am. the above post sounds similar to what I am experiencing. does it sound like the above fix would work for this issue.
Thanks
 

Answer:Using wireless I can connect in safe mode but not regular.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc
 

3 more replies
Relevance 73.39%

i am only able to login to safe mode with command prompt as administrator and it took forever at the loaded stuff screen then it only popped up cmd and the desktop background so i had to try to open a file so i could get to the windows does not recognize this program then i went to browse then the taskbar popped up with the desktop icons
i currently dont have any system restores as i tried to restore once this worked
and i dont have a windows xp cd but i have a key
and i dont have recovery console installed
 

Answer:cannot login to any accounts normally or in regular safe mode

16 more replies
Relevance 73.39%

Hey guys,

I know this has been outplayed over and over again but I was hoping someone could help me in my particular case. I have just updated to Windows 7 Ultimate 64bit this morning, and now I am having issues connecting to the internet. Actually it seems to connect fine (opens Windows Messenger and everything) but says Page Cannot Be Displayed if I try and open something in Internet Explorer. I searched a few forums and found that I should try it in Safe Mode and voila it worked. The other forums stated that that usually means that I have some 3rd party software blocking my connection...but how do I find out which one it is?

Answer:Internet working in safe mode but not in regular

Try this

If it works we can find the cause, if it does not its a driver

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

3 more replies
Relevance 73.39%

I've gotten various errors such as "machine check exception" and "uncorrectable hardware error" and 0X0000009C as well as 0X00000005 and 0X00000124 and others. I tried reseating the ram and cleaned dust from the motherboard and heat sink in case there was any overheating and now I can't even get anything to show up on the monitor at all (and I did check the monitor connections)

Any ideas would be appreciated, thanks !

Tags: windows vista, vistax64, tai game, doc truyen ngan

Answer:Vista can not boot in either regular or safe mode

I think this should explain what the error means-

https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx

Not much help in regards to which component it is. If you could see the POST, that would be helpful.

1 more replies
Relevance 73.39%

I can't access some websites on safe mode & normal mode.I tried accessing it through my moms laptop it goes through but Nod32 says it's a harmful program. But on mine it just says page load error BUT I can visit it through proxy.It's not my dns though I don't think it is.What else can be the cause of this?Can someone help me?

Answer:*HELP* Can't Access Some Websites On Safe Mode & Regular

Oh btw, I use windows vista 32 bit i think and firefox 3 & ie7

please can someone help me. i need this urgent.

5 more replies
Relevance 73.39%

The BSOD states:
A problem has been detected and windows has been shut down to prevent damage to your computer.
Tech Info:
STOP: 0x0000007B (0xF789E524, 0xC0000034, 0x00000000, 0x00000000)

I had a number of infections that spybot and malwaybytes found and fixed, McAfee didn't find anything. I kept looking around for some of my same issues that still persisted, all files hidden, administrator tools empty, cannot run a system restore. I came across your forum that referenced one of my issues and I downloaded combofix, ran it and while it was running the BSOD came up. I tried to reboot in safe mode but still receive BSOD.

At this moment I am runnig ckdsk /r from the recovery console.

I orginally posted in malware forum but I think I need to resolve the boot issue before I can address any malware issues, is that correct?

Any help would be greatly appreciated.

OS:XP
 

Answer:BSOD cannot boot in regular or safe mode

If the chkdsk doesn't help which it might.

7B is often associated with SATA drivers. If you can find your SATA configuration in BIOS, it might be worth a try to set it to ATA or IDE emulation.

If you give the model of computer or motherboard we might be able to figure out where the setting would be in BIOS. Usually it is under Drives or something like that.

I'm not sure that the setting switch on a running OS will help but it couldn't hurt to give it a quick try.
 

12 more replies
Relevance 73.39%

I can't start up the pc at all,

1. when starting the pc
We apologize for the inconvenience but windows did not start successfully. A recent hardware or software change might have cause this. Start in :
safe mode
safe mode with networking
safe mode with command prompt
last known good configuration
start normally

doesnt matter what i do I get a black screen with windows logo and the scrolling thingy(the first thing that comes up when it boots normally) and within about half a second it automatically shuts down and restarts.
------------------------------------------------------------------------------------------------------------------------------------------------------
2. if I do F-10 system recovery i get this error message:

The section IDA_CREATE_USER_DRIVE_U does not contain a valid dialog template. after I lick OK it shuts downs and restarts the pc again
------------------------------------------------------------------------------------------------------------
3. if I do Microsoft Windows Recovery Console

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first you've seen this stop error screen (more like the 31st :|) restart your computer. If this screen appears again, follow these steps:
Disable/uninstall anti virus, disk defragmentation, or backup utilities,. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK/F to check for hard drive corruption, and the restart ... Read more

Answer:computer won't start in regular/safe mode

System manufacturer and model?

Louis

10 more replies
Relevance 72.98%

OS: Windows 10 Enterprise
I experience problems running WMIC to execute command on remote. Namely, when remote user password contains a comma. Ie., when I run command like
wmic /node:remotepc /user:username /password:"one,two" somecommand

I get response:

, - Alias not found
Omitting quotes, using apostrophes or none around the password results in the same error message.
If I omit the /password (and enter it interactively), the above command executes as expected.


Question: how do I use the above batch WMIC execution when remote password contains comma ?

More replies
Relevance 72.98%

I have two computers, both use Windows 7, connected second computer to homegroup network but first one wouldn't connect to second. have now reloaded Windows on first computer due to other issues. Both computers see each other on network but neither will accept password to connect.

Answer:homegroup network doesn't accept password

Have a look at this:
Ultimate Troubleshooting Guide for Windows 7 HomeGroup Connection Issues

It will help to troubleshoot .
Dave

4 more replies
Relevance 72.57%

Hello,

After reading some of the more recent posts, it seems I may have a problem similar to the following post "871963-browser-hijacked-keeps-redirecting." I think I was infected about 4 days ago. One night I received an error when logging off my laptop, I think I hit end program so it would shut down, the next day when I turned my laptop on I noticed the problem.

My symptoms include:

-Blue Screen when trying to boot to Safe mode - STOP: 0x0000007E (0xC0000005, 0x80537009, 0xF7AEA508, 0xF7AEA204)
-Windows Media Center not working... when you double click, it does show an instance running in processes, it just doesn't ever open.
-Initially, I was getting redirects in firefox when using google or bing. Now I am getting tabs that randomly open of their own accord.

I too have CA security installed... have always been less than impressed with it's ability to detect and block anything. That's keep the free version of malwarebytes on my computer for backup. However, the current piece of malware infecting my computer has been illusive. In attempt to detect it, I have run the following:

1) CA (of course)
2) malwarebytes - I have a log
3) avira (online CD and rescue CD w/o update)
4) kaspersky (rescue CD w/o update) - free online scan is currently down - I have a log of rescue cd
5) bitdefender & chkrootkit (online quickscan and rescue CD w/o update)
6) trendmicro housecall (online)
7) superantispyware - I have a log
8) GMER - I have a log

Please fi... Read more

Answer:Firefox hijacked, Safe mode won't load but regular will

16 more replies
Relevance 72.57%

Hello all,

My wife's laptop (which is running Windows XP service pack 2) recently got hit with super anti virus pro. I ran malware bytes on the computer and on restart the computer would hang on a black screen with the cursor. I restarted in safe mode and was able to get back into normal mode after I used msconfig to disable all the programs that were running on startup. After re-starting I was able to log in, in normal mode. I also used msconfig and changed the startup selection to diagnostic startup.

Now windows explorer wasn't running, so I restarted in safe mode. Windows explorer won't run now in safe mode either. I restarted one last time in safe mode with command prompt. The command prompt works and when I tried to use that to run explorer.exe it came up for a second under windows task manager and immediately closed. I'm pretty much at a loss of what to do now.

Answer:Windows Explorer neither loads in regular or safe mode

<<I also used msconfig and changed the startup selection to diagnostic startup.>>Did you ever take the system out of diagnostic startup mode, using MSCONFIG?http://support.microsoft.com/kb/310560Louis

3 more replies
Relevance 72.57%

This is baffling me to no end. I can boot up fine in safe mode, and with networking. But I still manage to get a BSOD not too long into the session. I managed to capture a video of it and in the Technical information of the blue screen it said "STOP: 0X0000007E (0XC0000005, 0X81CB6169, 0X807F09BC, 0X807F05AO)", not sure if that's of any use... I've also uploaded the minidump file if you can use that information.

The other issue is the OS doesn't load at all in normal boot. It'll show the windows logo animation screen, then go black, and do nothing until I hit the power button. These problems started arising not long after I installed W7 onto the computer (acer aspire, amd athlon 3800+ CPU, installed a dedicated nvidia 9700 gt card overtop of the dedicated one (the problem was there still before that), 1.5 gig of ram).

If anyone could please help me with this it'd be greatly appreciated, thanks.

Answer:BSOD on Safe mode - No load on Regular boot

Try this:

Startup Repair
Note: You may need to do startup repair 3 to 4 times.

System Repair Disc - Create
System Recovery Options
Repair Install

1 more replies
Relevance 72.57%

This is baffling me to no end. I can boot up fine in safe mode, and with networking. But I still manage to get a BSOD not too long into the session. I managed to capture a video of it and in the Technical information of the blue screen it said "STOP: 0X0000007E (0XC0000005, 0X81CB6169, 0X807F09BC, 0X807F05AO)", not sure if that's of any use... I've also uploaded the minidump file if you can use that information.

The other issue is the OS doesn't load at all in normal boot. It'll show the windows logo animation screen, then go black, and do nothing until I hit the power button. These problems started arising not long after I installed W7 onto the computer (acer aspire, amd athlon 3800+ CPU, installed a dedicated nvidia 9700 gt card overtop of the dedicated one (the problem was there still before that), 1.5 gig of ram).

If anyone could please help me with this it'd be greatly appreciated, thanks.

Answer:BSOD on Safe mode - No load on Regular boot

10 memory dumps - 6 different STOP errors, 5 different drivers blamed

I would suspect that there's a compatibility or a hardware issue here.
The most likely problem is with your wireless USB adapter as the driver is dated from 2006.

Please uninstall the software for your wireless USB adapter and see if that stops the BSOD's. If so, then either download the latest, Win7 driver for the USB adapter or (if there isn't a Win7 driver) purchase a new adapter. I'd suggest a PCI/PCIe adapter that plugs into your motherboard (rather than a USB adapter) as they have less problems than the USB one's.

Summary of the BSOD's:

Code:

Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 21:13:01.352 2010 (GMT-4)
System Uptime: 0 days 0:01:43.052
BugCheck A, {5d42a941, 2, 1, 8287e028}
Probably caused by : ntkrpamp.exe ( nt!KiTryUnwaitThread+46 )
BUGCHECK_STR: 0xA
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 18:58:32.420 2010 (GMT-4)
System Uptime: 0 days 0:01:08.920
BUGCHECK_STR: 0x50
PROCESS_NAME: iexplore.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 18:56:48.967 2010 (GMT-4)
System Uptime: 0 days 0:04:23.666
BugCheck A, {76bcd2e9, 2, 1, 82c1e839}
Probably cause... Read more

3 more replies
Relevance 72.57%

I recently came home to my computer off and when I went to turn it back on, it started up with a black screen after the windows logo with just the cursor available. Things like ctrl-alt-delete did nothing so I tried booting up in safe mode which ended up with same black screen and cursor.

I then went to search the internet for possible fixes and have done/verified the following:

Used boot CD and ran Start-up repair, told me to remove any mp3 players or USB devices and try starting again, didn't work (nothing was connected in the first place). The start-up repair log appears to identify no problems with the system.

It's not a hardware issue, the drive itself has been checked on another computer and I've already used a new drive and installed a new copy of windows using the same computer.

Not a virus issue, scanned the drive for viruses and did a chkdsk on it, neither of which turned up anything.

Unfortunately there are no restore points saved so I can't just revert to an older profile.

Since I can access the drive on another computer, is there any program I could run to try and fix the problem? This seems to be the only thing that hasn't been covered in other topics similar to this one which I've found online.

This is my last resort so any help that you can provide will be greatly appreciated,
Thanks!

Answer:Black Screen on start-up in regular and safe mode

Did you take the cover off and make sure all cables are connected, make sure that your RAM is seated properly. Just anything that might be loose. From what you say, the HDD seems to be OK. It would seem that making sure everything is connected OK would be the next step. Let us know.

9 more replies
Relevance 72.16%

hello, my computer's screen froze the other day and now when I turn it on again it tells me that it didn't shut down properly. Gives me the options of continuing on safe or regular mode. What should I do?? how do I get it back to normal?

Answer:safe mode or regular mode??

Boot to Safe Mode, then shut down normally, then boot to normal mode.
While in Safe Mode you can attempt to troubleshoot the issue, and in Safe Mode with Networking you can even update your drivers (such as your video drivers).

2 more replies
Relevance 71.75%

Can someone help? This started acting up around 1:30pm (February 3rd) at school. Everything works with a Live CD (Ubuntu 8.0.4) and nicely with Safe Mode Networking and a System restore.

I tried uninstalling my drivers and updating them and it didn't help. Any other options?

Laptop specs (Inspiron 1520) :

Core 2 Duo T7200
160GB HDD 7200RPM Sata
Intel Wireless Pro a/b/g (I think it was 395 or something)
10/100Mbit NIC
8600M GT 256MB
And of course Windows XP Pro SP3

This was working fine before Tuesday and then it just decides to bug me.

HELP? Need this working for school.
 

Answer:Wireless/Ethernet Works in Safe mode but not in Regular Windows??

9 more replies
Relevance 71.75%

This is currently after a fresh install of windows 7 when I was encountering problems yesterday morning when I booted up my computer.
 
Problem 1: Runs fine in safe mode but slow in regular boot up.
Problem 2: Says I have 8gb ram available but says I have 16gb installed in BIOS.
Problem 3: Internet speeds start really fast then drop to around 3kb/s but not on any other computer in the house. was fine before fresh install.
I have tried updating my BIOS as well as only loading necessary start up programs and services through msconfig with no visible change.
 
I dont know what logs I have to provide as I am a novice with PCs.

Answer:PC running fine in safe mode but exceptionally slow in regular

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

3 more replies
Relevance 71.75%

Hi,

I have a laptop that randomly freezes up for a few minutes over and over. I have ran malwarebytes, HijackPro and webroot. I also have Ran chkdsk /r, ccleaner, and have defraged it. No substantial problems have been reported and all that were have been repaired. But my computer continues to freeze every few minutes in safe mode and regular processes. Please help me into what I should do. I am so lost here

Jippys

Answer:[SOLVED] Laptop randomly Freezing safe mode and regular

Hi and welcome to TSF please post the make and model of your laptop please list all the things you have already tried so we can try to avoid repeating unless entirely needed when in safe mode have you tried system restore to a point when it all worked without issue

19 more replies
Relevance 71.75%

Curious where the issues could be. I posted last night that when I was trying to run DISM or SFC a small second window would appear and close and then the processs would not start at all. It would just sit there and do nothing. The other thing is I could not close those cmd windows where sfc and dism were not working even via task manager. I was going to do a reset of windows, but I thought I would give something one last try. I booted into safe mode with networking and dism and sfc ran perfectly and completed. I am at work right now. I haven't tried to go to desktop on regular boot. I was going to do a couple more sfc dism when I got home to make sure things were fixed. My question is what could cause dism and or sfc to run perfectly in safe mode, but not on regular boot?

Answer:Strange-DISM SFC work in safe mode, but not in regular boot?

Run as Admin ??

2 more replies
Relevance 71.75%

Hi,
My CIO's Outlook is starting in "safe Mode" and have ran detect and repair and it did not fix it.

Any suggestions on how to get it to come up in regular mode??

Thanks

Michael Henderson
 

Answer:Solved: Outlook is starting in Safe Mode, I need it to start regular

You are getting this message?
Outlook failed to start correctly last time. Starting Outlook in safe mode will help you correct or isolate a startup problem in order to successfully start the program. Some functionality may be disabled in this mode.

Do you want to start Outlook in safe mode?
Click to expand...

If so, what happens when you say No?

Also, what version of Outlook?
 

2 more replies
Relevance 71.75%

Yesterday I started getting the "Congratulations, you won" audio as well as some other adverts randomly playing without any popups or browsers open. I tried a series of malware removals (Malwarebytes, spybot seek and destroy) I got hijackthis and tried to look for out of place items by matching with others posts. Anyways, did all that and then then ran an antivirus scan (AVG free) and went to bed. When I woke up I was at the Start windows normal/safe/safe with network/last known screen so I went to last known. When I did that, it never booted just goes to the windows logo and then blue screens saying memory issue or update BIOS. Tried to boot in safe mode, same story. When I run the diagnostics test it says "Error loading operating system." All remedies online so far require getting online (computer wont start) and downloading BIOS updatesHELP!!!

Answer:Congratulations virus now cannot boot (regular or safe mode) I get the BSOD

Hi, figsahaas42 It seems that the issue is related to the Master Boot Record due to the Whistler Trojan. You will need the Windows VISTA Installation DVD to fix this. Please be advise that there is always a slight possibility that you may lose your Data repairing the Master Boot Record.You must access the Vista Recovery Environment throughout the Vista installation DVD.At the Install Windows screen, select Repair your computer. Then the command prompt.Type the following command at the prompt, then hit Enter.bootrec /fixmbrOnce finished, type Exit and press Enter. Restart the computer in Normal Mode.

3 more replies
Relevance 71.75%

Hey guys, I have been reading around and posted a bit on reddit and still no solution, although it seems like it should be simple.

2 weeks ago tuesday my work laptop had regularly scheduled windows updates that everyone loves to see right before they shut down. the next day it began with the circle of death after 1-3 min after start up, sometimes upwards of 30 minutes of functionality. but eventually the circle of death comes and i can't click on anything, however the mouse will still function.

i have gone back to every restore point possible and still get the freezing. i have updated/ran MSE in safe mode as well.

It's not a huge deal if I have to reformat, I just really feel like the solution shouldn't be that hard.

Anyways, thanks for your time.

Answer:BSOD, after regular updates, works fine in safe mode

Hello and welcome aarondsp well if you can get safe mode run these mate

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html< if necessary include the /f and /r in the command line as per Option2 >in safe mode if need be

Forgot

SYTEM SPECS ADD IN

matecan we have some system specs please as what you have posted gives us not thatmuch to work with and given there are so many manufacturers of components andconfigurations that do influence what goes on within any given machine and OS.
System Info - See YourSystem Specs

1 more replies
Relevance 71.75%

I'm working on a coworkers computer that runs Vista 64 Professional, and we cannot get Outlook to run. Here are the errors that its given me.

1. Microsoft Outlook has stopped working (A problem causes the program to stop correctly. Windows will close the program and notify you if a solution is available.).

2. Outlook failed to start correctly last time. Starting Outlook in safe mode will help you correct or isolate a startup problem in order to successfully start the program. Some functionality may be disabled in this mode.

3. Outlook failed to launch in safe mode. Do you want to start Detect, and repair?

- It still wont run, and I've tried these commands in Run:

outlook /clearviews: Gave me the error "the command line arguement is not valid. verify the switch you are using."

outlook /safe: Gave me error 3 that I noted above.
- Then I tried repair in the Programs/Features section, and that didnt seem to have any effect.

- I've also looked in the task manager to make sure that I was not running multiple instances of the application.

- I tried to reinstall w/out uninstalling (she doesn't want to lose any of her saved information).

This is a new thing that just started happening after the weekend, and my guess is that its due to one of the automatic updates?

Answer:Outlook 2007: Wont open in regular, or safe mode.

This morning I tried to repair using the Outlook 2007 disks, and I noticed as soon as I run the disk I get the error...

"dwdcw20.dll has stopped working"

3 more replies
Relevance 71.75%

This morning, after resetting my PC, I encountered the blue ': (' error screen. After trying to restore to a previous instance of the PC (there were two dates to choose from), the restore failed and the two dates are no longer available.

I am unable to reset, restore, start in safe mode, etc.

What should I do?
 

More replies
Relevance 71.75%

I have an HP desktop, and I was on my computer. My foot accidentally hit the power strip off (which everything was plugged in to).
For some reason, every time I try to turn the computer back on, the blue HP screen comes up, then the black screen which asks me if I wanted to open in (safe mode, safe w/ networking, safe w/ command prompt, or open windows normal)
Whenever I click safe mode or open normal, it takes me to the Windows XP loading...

It loads, however when it's done loading, the computer RESTARTS! and does the same things again...
Perhaps it was a disk failure? What can I do to fix this?

Please help!

Answer:Computer keeps restarting when tying to open regular/safe mode?

as you start the computer, try pressing the F8 key up and down to see if you can get in to safe mode that way.

7 more replies
Relevance 71.75%

Have a laptop here that was virus infected. AVG pro removed 157 viruses including trojans. Now windows crashes after windows 7 icon. Restore last setting just runs and runs with no completion. Safe mode gets only so far in loading drivers and then reboots (suspiciously stops at the AVG driver, hangs and reboots). There is no restore disks for this laptop. Is there a way to stop certain drivers from loading during safe mode? Any help or guidance is appreciated.

Answer:Remove viruses and now windows won't boot regular or in safe mode

Hi.
157 virus? It's seem that avg is not working well or you make something wrong.
Try these steps,in this order,
Advanced Boot Options
System Restore
Troubleshoot Application Conflicts by Performing a Clean Startup
Then if its possible remove avg and use this Good and Free system security combination.

3 more replies
Relevance 71.34%

Issue
My brother has a PC with Windows 10 and two Administrator Users:
#1 User: MS Account (the main one, used by my brother)
#2 User: Local Account (Secondary one, used by myself)

Since the login page is usually bypassed in this PC via netwizpl setup, none of us usually need to insert a password at startup, but after a Windows Update the login page reappeared, and my brother can't access his MS account any more because his password is not recognized.

Useful info

It's no keyboard issue: the keyboard layout is consistent with settings and we also checked the correct password spelling with the "eye" icon
Resetted MS password, but no joy: we have tried to reset the MS account password. The new password grants access to the MS account at https://login.live.com, but it's still useless when trying to login to Windows with the MS account.
All OK with the Local Account: the Local Account still grants login, and since it's an Administrator account it still allows access to the other account data.
Haven't done a Restore (yet): An obvious (but not necessarily effective) solution could be a Windows Restore. I'll probably try to Restore a previous System State if I don't find a better solution, but I'd prefer to understand the cause of this issue.

 

Answer:Windows 10 doesn't accept Microsoft Account password change

Have you gone into the MS account from the local account and changed to the new password?

I assume that your local account is of the Admin group, which should give you access to the MS account settings.
 

1 more replies
Relevance 71.34%

First I assigned a 9 character long BIOS password via the Security Assist utility of my new Toshiba Portege M400 (M400-139) with Windows XP Tablet Edition.
It asked me if I also want to use the same password "repeated" to cover the 22 or so (I don't remember) characters long HDD password, and I said ok.
Then, I removed the BIOS password. But couln't be able to remove HDD password.

Then I created another password which was 1 character long, and removed it, but the HDD password remained.
When I rebooted the system, it asked me the "Built-in HDD Password".
I tried entering both the 9 and 1 character long passwords but it says "Not certified". What should I do?

Should I write tha password over and over again until it reaches 22 or so characters long?
If it is the problem, then, how many characters long?
I also think that the keyboard layout mapping may be a problem.

I never changed the layout but maybe the factory default is different from the windows one.
But I only used numbers and international standart letters.

I need immediate help.
All my work is halted.

Answer:Portege M400 doesn't accept built-in hdd password at boot

I don?t know if you have inserted the right HDD password or not but the message ?Not certified? said that the inserted password is definitely not correct.
Someone said that the message ?Not certified? could appears if you the notebook was send into hibernation mode instead of shutdown mode after the password was set.

But I don?t think that this could be relevant in your case.

One question; did you try to delete the HDD password from the Toshiba Password utility or in the BIOS?

Please check if you can change/delete in the BIOS because I found the info in the M400 user manual that you have to use the BIOS setup to change, delete the HDD password ot to set the HD master password!

The user manual provide also a info that if you forget you HDD user password, Toshiba will not be able to assist you , and your HDD will be rendered completely and permanently inoperable! When saving the HDD user password shut down or restarts the computer. If the computer is not shut down or restarted, the saved data (password) may not be correctly reflected!!!

So maybe this is a reason why you cannot change the HDD password ?:|

Greetings

2 more replies
Relevance 70.93%

Safemode works fine, freezes in seconds after a normal reboot. The online scanners caught some bugs, but the problem is still there. Help would be appreciated!

Logfile of HijackThis v1.99.1
Scan saved at 7:38:16 PM, on 7/8/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\HJT\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://yahoo.sbc.com/dsl
R3 - URLSearchHook: (no name) - {1C78AB3F-A857-482e-80C0-3A1E5238A565} - (no file)
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
O2 - BHO: (no name) - {53707962-6F74-2D53-2644-206D7942484F} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O2 - BHO: SSVHelper Class - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre1.5.0_06\bin\ssv.dll
O2 - BHO: Norton Internet Security 2006 - {9ECB9560-04F9-4bbc-943D-298DDF1699E1} - C:\Program Files\Common Files\Symantec Shared\AdBlocking\NISShExt.dll
O2 - BHO: NAV Helper - {A8F38D8D-E480-4D52-B7A2-731BB6995FDD} - C:\Program Files\Norton Internet Security\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: (no name) - {2CDE1A7D-A478-4291-BF31-E1B4C16F92EB} - (no file)
O... Read more

Answer:Computer only works on safe mode, crashes in seconds during regular reboot

By the way, I'm running XP Professional Version 2002 with Service Pack 2. Let me know if you need any other information. Thanks!

8 more replies
Relevance 70.93%

My friend has a Windows 7 Starter-based netbook. He has asked me to help but I can't seem to find where the problem is. 
Each time I try to boot the PC, the log-in screen appears, I provide the credentials, and then the white screen appears and nothing can be seen or done. The only thing I can do is pressing ctrl+alt+del, which gives me the normal lock screen, but from here I can only lock the PC or turn it off, nothing else works.
 
 
If I try to boot up in safe mode, the PC, after asking for credentials, reboots within 10-15 seconds.
 
Can't seem to figure out what to do.
 
Please, could you help me?
 
 

Answer:Windows 7 start-up White Screen in regular & safe mode - help needed

Hello Paolo26 I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same",... Read more

3 more replies
Relevance 70.93%

Hello everyone!

My friend just gave me her laptop to fix(does this happen to anyone else???). The laptop is an Acer Extensa 5620-6830 here are the specs

Intel Core 2 Duo T5250
1 GB DDR2
200 GB HDD
Windows Vista Home Premium

I power on the notebook and it goes through the POST, then begins to load Vista. After about 21/2 minutes it reboots and goes through the whole process over again.

The next time I booted the computer up it exclaimed, Windows failed to load - Choose to either 1.) Start in recovery mode or 2.) start windows normally. I select recovery mode and it gets past the windows loading screen; but then it just displays a black screen. Nothing ever happens.... reboot.

Then I try to boot to safe mode, thinking maybe there is a faulty driver causing the crash. It seems to load all the windows files, but then *BAM* BSOD.... system reboots. I'm not sure how to get to the minidumps if i can't even power up the computer.

Further, any mode from the F8 list crashes the same way.

And now for the worst part, she told me she purchased the machine at a retail giant, whose name I won't mention. She claims that there was never any disks that came with the laptop. No Windows Vista startup cd :/

I'm not sure what to do now.... any ideas?

thanks
maX
 

Answer:Vista Fails to load, Regular/Safe/Recovery Mode all fail

I was able to disable the automatic restart on system crash. (I didn't see it in the options after I pressed F8)

The BSOD error reads: UNMOUNTABLE_BOOT_VOLUME

***EDIT***

I did some research on the error. It appears I need to run the chkdsk utility. Is it possible, b / c I can't get into windows, to create a boot disk which will run chkdsk? or is that a dumb question?
 

2 more replies
Relevance 70.93%

Heeyy everyone!

I'm having such a hard time fixing my friend's Dell laptop which is running Windows XP Professional.

She had gotten a virus through AIM, so I was trying to remove it for her. I had first temporarily turned off System Restore, and then went into the Utilities Configuration (by running msconfig), and then I checked off the /SAFEBOOT box. So obviously, when I restarted the computer, it restarted in safe mode.

The problem?

She has it set so that the computer asks for her user name and password at start up. I have both the user name AND password, but windows continually rejects it saying "The System could not log you on. Make sure your User name and domain are correct..." yada yada yada. I'm also using the correct case.

It worked before entering safe mode. Now I'm stuck at this stupid log on screen, and get even get out off safe mode.

If anyone could help, I'd GREATLY appreciate it.

Answer:**Logging on in safe mode?!

I have a few question before I can try to think of the problem.

Is her user name a network/domain user or local to the computer?

Is her user the main administrator to the local computer or a administrator on a network or not a administator at all?

is you running safe mode with network support or with out?

Is you trying to log on to the computer or to the network?

Sorry for all the questions but it will give me some idear of what going on if I get the answers.

2 more replies
Relevance 70.11%

My firewall (verizon) pops up messages with numerous progs trying to access the internet (here are a few... 25vj7Q.exe d0vTE1Im.exe R3IR2wkb.exe NmNva775.exe). From safe mode, I ran SuperAntispyware, Spybot, Malwarebytes, Combofix, MGTools, then HiJack this.
They remove numerous things, mostly trojans. I reboot into safe, and scan again...everything comes through clean.
I reboot into regular windows and scan...clean. Then within a few hours (sometimes minutes) I start getting infected again, firewall is activated, and rescan reveals virus.
Please help! I've been trying to fix this for days!

Attached are the MGtools log, hijackthis log and combofix log.
 

Answer:Trojan infection. 'Clean' in safe mode, but in regular boot, theyre back! HELP

Hello vthokieod,





SuperAntispyware, MalwarebytesClick to expand...

Do you have the logs from these programs available to post?
 

4 more replies
Relevance 70.11%

hi,
I really need some serious help.
When I run my PC in Regular and Safe Mode my desktop doesnt load, no Icons, Start Menu or anything shows up, only the desktop background picture. My mouse works perfect and the Task Manager (when I press ctrl+alt+delete). Im able to go through my PC when I run New Task Manager which I backed up my files on CDs just incase I might have to reinstall XP.

any help is most apprectaied, I wish I knew what was wrong.
thanks
 

Answer:Desktop vanshined no icons, start menu, nothing Safe mone and regular mode

Go here and scroll down to Line 195. In the second column there is a utility called: Restore Desktop Icons and Taskbar.

http://www.kellys-korner-xp.com/xp_tweaks.htm
 

3 more replies
Relevance 70.11%

I somehow got a Trojan on my computer running windows 7, stupid Mcafee some help you are. At first I kept getting a warning that my computer was infected when I tried to access Internet Explorer. So I restarted my computer in safe mode to try to turn off any unneeded processes that could be causing the problem and to do a system restore but the only thing that would come up was my libraries they automatically popped up my music/pictures/video nothing else no desktop background, icons, start menu, task bar... nothing! Thank god I can at least retrieve all my documents and files. Same applied when I tried to just do a regular start up is there anything I can do other than to reformat:cry? This one really has me stumped
 

Answer:Can only access libraries Photo/Video/Documents in safe mode and regular boot

Can you bring up task manager in either safe or normal mode? If you can, you can start a new process and type in explorer. See if that gets your desktop back.

You can try creating this disc and then booting the infected computer to it:
Kaspersky Rescue Disk.
 

1 more replies
Relevance 70.11%

Ok, need help with a self induced catastrophe. I went into msconfig, to set Safemode booting so I could run Malware scans. One small problem, I can't remember my original Admin password. Haven't used it since day 1. I always used the 4 digit pin,. I don't want to crack or circumvent anything, I just need to get it OUT of safe mode booting and back to normal boot so I can use my pin and get back into the system. Once I can boot normally again, I can get in with the pin and reset my admin password.

Does anyone know if there is a way to do this? Is there a Keystroke combo or something that will let me get back to normal booting??? PLEASE HELP!!! I am an experienced tech, and have tried every trick I can think of. All I want to do is make it boot normally again, and not into Safemode. Dear Microsoft PLEASE bring back the F8 key boot menu.

Answer:How to get out of safe mode boot without logging in?

Try clicking on Windows + R.....then msconfig to turn off Safe mode.

5 more replies
Relevance 70.11%

if you can't get into your user account, is there another way to boot to safe mode?

I think you can do this from windows recovery media, but I was unable to create that. (It didn't like my sandisk flash drive, even though my 3rd party programs have no problem making it into a bootable media, so it seems not to be damaged.) And there is no option for DVD, only flash drive.

I tried getting into safe mode from a windows 8 recovery CD, but it couldn't do it

Answer:how to boot into safe mode without logging on?

shmu26 said:

I tried getting into safe mode from a windows 8 recovery CD, but it couldn't do it



How to boot into Safe Mode from the Windows 8 installation media or recovery USB flash drive. -> link

5 more replies
Relevance 70.11%

I get the BSOD with "Driver IRQL Not Less or Equal" message and NDIS.SYS

Not sure how to proceed.

Dump file attached. It would be great to get some assistance. Thanks in advance.

Answer:BSOD while logging in except in Safe Mode

It appears to be your DirectX causing the issue. Try updating it. Also, it may be your graphics card.

Try following the steps for updating your graphics card as outlined in (using driver sweeper to remove all remnants):
http://www.sevenforums.com/crashes-d...ould-i-do.html.

Also, do a memtest as outlined in:
RAM - Test with Memtest86+

Post your results.

9 more replies
Relevance 69.29%

Hello everyone..

Would anyone be willing to help in diagnosing a rather complex computer related issue?

When I start Windows 8 normally, my computer slows and then freezes after approximately five minutes of logging in regardless of the work load. Within Safe-Mode 'with Networking' everything always seems fine, there is no freezing, no slowness and nothing to indicate otherwise.

Here I have listed everything I have done until now to troubleshoot the issue.:

Firstly, after entering Safe-Mode with Networking I disabled all user services and startup items, then, rebooted into normal mode with no success.. it froze again. In Safe-Mode, I disabled all services possible including Microsoft Services.. rebooted ..still no success.

I then thought that maybe it could be a temperature problem even though things were working in Safe-Mode due to the fact it takes around five minutes to not respond, so, I checked the CPU, GPU, all HDDs my Primary drive 'SDD' and my motherboard, they were all well within range and none were fluctuating more than six degrees.

Then I utilised MS Driver Verifier (verifier.exe) with all options selected and all drivers selected, I rebooted my computer (all within normal mode) and after ten minutes of waiting I was able to login, waited for the freeze again, rebooted and logged in again.. when I looked at the results of the 'verifier' program, no error(s) had occurred, it doesn't seem to be a detectable driver issue. ..Re... Read more

Answer:Freezes After Logging In, No Issues Within Safe-Mode.

7 more replies
Relevance 69.29%

Hey guys,

Bought a new Dell PC last year with Vista premium already installed on it. I had some issues when I tried to update (service pack one cause the admin users access to freeze upon logging in crtl-alt-del wouldnt even work).

Created a new users or a guest and vista seemed to work fine (though logging in as the old admin user still cause the system to freeze).

1 month or so later and the system will allow me to log on (new user/guest) and within 60 seconds the system loggs off and shuts down all on its own).

Restarting in Safe mode cause this to shut down to happen even faster

As the system starts up fine and allowed me to log on view the files on my desk top, I took this as a sign my hard drive/power source was working. (Right?)

A tech that looked at the machine Briefly mentioned that it might be because Microsoft is under the impression that this is a pirated copy for some reason (why the issue also happens is safe mode)

Anyone have any similar issue?

Answer:Vista logging off then Shutting down by itself (even in Safe mode)

Windows restarts as a result of Windows crashing- Constant rebooting is most likely a result of Windows Corruption. Use your Disk/recovery partition to access advanced recovery ultilities. Perform a system restore to a point before the crashes, or reinstall/repair your Windows Installation.

Further info regarding endless reboots and Pirated software:

SP1 can also cause endless rebooting. (Download all updates from Windows Update including any prerequisite updates before SP1 installation)
The problematic update — Servicing Stack Update (KB937287) — was pulled from the automatic update in February.
However, now Microsoft has the problem in hand, according to the Microsoft Update team blog: "We discovered that there were a few unknown and rare events during the middle of the installation of the update that could cause the update to think it needed a reboot to complete the installation. If this happened, the system entered a repeating reboot loop."
A fix is being released on Tuesday which will install prior to the problematic update and prevent the system from rebooting during installation. Changes have also been made to the Servicing Stack Update installer code so it checks for the fix before installing. Both updates will install in the proper order through Windows Update.
-April 2008 ZDNET

Pirated software warning-
Users whose systems are identified as counterfeit will be presented with clear and recurring notices about the status of their system and... Read more

2 more replies
Relevance 68.88%

After I installed AVG PC Tune UP and Antivirus is when the compmuter started acting up. I ran the PC Tuneup and it showed me a list of services that I could Disable. After I disabled the services the computer started to freeze mintues after logging in. I went in safe mode deleted both AVG programs and enabled all the services, but the computer still froze. At this point sometimes it was a succesful login, and when it was the computer was very slow almost unresponsive. I went back into safe mode and installed Avast Internet Security and scanned the computer for viruses, and it found 3 viruses and deleted them. So, I tried logging in again, but no luck. In safe mode, I went to the msconfig and disabled startup programs and disabled some services that were not needed. After I did that the computer seemed to run a little faster, but it still froze; and the user account background has been changed to black. So, does this seem like there is still a virus in the computer?

HijackThis Log:
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16446)
Boot mode: Safe mode with network support
Running processes:
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Trend Micro\HiJackThis\HiJackThis.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = Preserve
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=5489... Read more

Answer:Computer Freezes Minutes After Logging In(Not In Safe Mode)

16 more replies
Relevance 68.06%

Hello. First of all, sorry about just registering and asking a question - I don't like it much, but I've been unable to solve this on my own, and I've run out of places to look for answers.

Specs (Fujitsu Amilo Pi 3660):
2 years old

OS: Windows 7 Home Premium x64 (last reinstalled about 6 months ago)
CPU: Intel Core 2 Duo T6600 2.2GHz
Mobo: Intel PM45
Memory: 4096 MB, DDR2: PC2-6400 (400MHz)
GPU: NVIDIA GeForce GT 240M
Sound: Realtek ALC272

Problem:

It started yesterday. The computer boots as normal, but a short while after logging in, I get BSOD Page fault in nonpaged area, and once Registry Error. I had not installed anything for several days beforehand, nor have I changed the hardware since I bought the computer. I had to do a fresh install of Windows about 6 months back, but I've had no problems since then. Safe mode works just fine.

Things I've done:
CHKDSK - No problems
Malwarebytes - 1 trojan
Memtest - 2 passes (was told this was "good enough" for starters)
Booting without sound, graphics, network, bluetooth, webcam, DVD reader - Problem persists
Last BSOD occured after running verifier on all non-Microsoft drivers.

I tried to generate a system health report, but I get an error if I try running it from cmd - I get to perfmon, but I cannot generate a report, nor can I find it manually (the curse of having a Swedish-language OS). I have attached the dumpfiles at least.

Answer:BSOD Stop 50 (once 51) after logging in; Safe mode works fine

Great first post!
Well done!

> What AV are you using?

>Suggest you run Memtest for longer as per the instructions below.

>Yes we realize your Verifier is enabled, is an iffy proposition & it didn't catch the culprit this time.
Keep trying please.

Attachment 198555
These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

If you have raid > update its Driver.
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe M... Read more

9 more replies
Relevance 68.06%

Hi,
The problem started within the last week or so in my win vista home basic on a a dell inspiron 1501 laptop. The windows boots fast and gives me the log in screen. I put password and hit enter. Now it shows the text "welcome" with a revolving icon. Wait forever but can't log in. Have to hold down power button to shut it off.

If I start in safemode with/without network, everything is fine. It allows me to log in in seconds.

I use ccleaner and there is absolutely no extra or bare minimum items in startup. The computer is wel maintained , clean of junks and I don't use resource hog softwares. The system is 3Ghz and 1.5GB RAM.

I would appreciate if anyone could help. I can provide more info if needed.
Thanks.

Answer:After logging in welcome screen stays forever but can log in fine in safe mode

run an antivirus scan in safe mode.

if that doesnt work, try doing a windows repair from the startup disk

also run sfc /scannow

5 more replies
Relevance 68.06%

I got a BSOD, and now upon logging into Win 7 I get a BSOD each time unless I go into Safe Mode which is working fine, I uploaded the dump file that I got from the program from this site.

I did run Malwarebytes in QuickScan and no malware was found.

Should I scan for a virus?

My PC is...

OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name PCMAIN-PC
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
Processor Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, 3502 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0706, 8/5/2011
SMBIOS Version 2.6
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume4
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name pcmain-PC\pcmain
Time Zone Eastern Standard Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 16.0 GB
Available Physical Memory 14.5 GB
Total Virtual Memory 31.9 GB
Available Virtual Memory 30.6 GB
Page File Space 16.0 GB

Answer:BSOD upon logging into Windows 7, Safe Mode works fine.

Hi.

All your minidump analysis points to 0x124 error.
If you are overclocking anything stop.
Stop 0x124 - what it means and what to try

5 more replies
Relevance 67.65%

Hi,

I got win 7 home premium 64 bit on an i3 laptop. My system worked fine until today morning.

The problem is this;
When I boot the system in normal mode, I get to the part where I need to enter my password to login. Once i do that, all I get is a black screen with the mouse pointer that moves about normally. I've waited for the normal desktop environment to appear (ie icons and taskbar) but this doesn't happen (btw, my desktop background color is always black).
The system boots perfectly in safe mode.

Yesterday was the first time in over a year I used utorrent. I used to get the BSOD when I used to use it. I couldn't rectify the problem and hence had stopped using it. It worked fine yesterday though.

Any idea whats happening and how I could fix the problem?

Answer:Windows doesn't login properly in normal mode but fine in safe mode

I've tried running SFC /SCANNOW a couple of times but I keep getting a message that there may be corrupted files. I also created the sfcdetails.txt file.
Going to try the system restore option now

6 more replies
Relevance 67.65%

I need some help please as I do not know where to start.

I installed a Windows Update a few days ago and then got a BSOD the next time I turned my PC on. So I did a system recovery and this seemed to work.

Now, it's happened again without me doing a Windows Update and I cannot get into safe mode.

I am really sorry but I cannot even follow the BSOD instructions to run a diagnostic tool because I literally cannot get into anything to run the diagnostics.

Can anyone offer me advice?

Answer:Windows Normal Mode Crashes to BSOD and Safe Mode doesn't load

We can offer the best assistance if you would upload the following information
http://www.sevenforums.com/crashes-d...tructions.html

9 more replies
Relevance 67.65%

After upgrading to SP2 about a month ago so I could take finals on my computer at school, i noticed that my computer wouldn't boot up in safe mode (i just get a blank dark screen and i can hear the computer doing something but giving it a reasonable amount of time it doesn't progress from that screen). It didn't concern me because normal mode was working and i was able to take my tests. But now I want to get to the bottom of this. I delayed getting sp2 because i had a feeling it would mess up my computer. (i've had other problems too with visual skins but i was able to resolve those).If it matters, i ran a scan of my system with spyware doctor and it said i had a trojan.dialer and needed to boot in safemode to get rid of it. When I tried, it wouldn't load. Oh, btw, any way to get rid of that trojan.dialer without using safemode?

Answer:Windows Xp Home, After Sp2, Safe Mode Doesn't Work, Normal Mode's Fine?

Try running Ewido online scan and post the results overhere.

6 more replies
Relevance 67.65%

Hi,
I am using Compaq Pressario P4 PC with ?Windows XP Home edition? Operating System installed on it. The issue that I am facing is as follows:
- One day, audio was not working with PC. My hard disk drive was close to full, so, I thought of uninstalling couple of unnecessary programs. While doing so, I stopped uninstallation in middle by pressing back button, then, uninstallation process hanged. After that I also tried rollback of soundMAX digital audio driver and again I selected back button and this also hanged. Please note that I had inserted the restore CD in upper CD drive to search the audio driver file. Then, I started the computer through hard reset. After that first it went in restore mode, exited that, Windows Logo came and after that there was just a blinking cursor at top left corner and nothing would happen after that.
- Then I called one PC technician for data recovery from my hard drive. He took my hardrive out of the PC and connected it via USB adaptor to my laptop. The hard drive could be detected and we started data copying from hard drive to laptop. However after every 3-4 minutes, hard drive used to hang and then we had to take out the hard drive cable, again reconnect. This we repeated multiple times to recover the important data from my hard drive.
- After that, hard drive was re-inserted in the PC. Since, after restart PC was not booting up (Windows Logo came and after that there was just a blinking cursor at top left corner ... Read more

Answer:PC doesn't boot in normal mode even after OS reinstallation,though,boots in safe mode

Yes, the hard drive may have become faulty and unreliable and therfore will soon fail completely. For confirmation, test it with the drive maker's diagnostic software for DOS.
The links are here: Start > All Programs > Accessories > System Tools

In Safe Mode, no third-party drivers are loaded. In Normal Mode, all those extra drivers being accessed on an already flakey drive is causing it to crash.

4 more replies
Relevance 67.65%

Lately I have been having problems with my computer.
It turns itself off (it doesn't say "Windows is shutting down..", it just dies.) when I am using it. It turns off after a few hours, sometimes after a few minutes. Then I would have to wait a few minutes until I can turn it on. Because it would not turn on no matter how much you pressed the power button, so the only thing to do was to leave it for a while, and then it world turn on.

But now when you turn on the computer, it turns off seconds after you log in, and then the blue screen of death appears. The next time I tried to turn it on, I got the option to boot in safe mode, and it doesn't turn off. I left it on for a whole day and it didn't turn off.

My computer is a Dell Dimension 5150, running Windows XP Sp2 (I think). I will post more details soon, because the option for running in safe mode does not come up when I turn the computer on. I don't know how to boot up in safe mode because I am a computernoob .
I am typing this on my other computer if you're wondering.
Any help please?
Thanks.

Answer:Computer turns itself off on normal mode, but doesn't turn itself off on safe mode.

reboot your computer ,as it reboots tap the (f8)key choose last know good configuration

2 more replies
Relevance 66.83%

I switched to Safe Mode through MSCONFIG because I thought I had a virus or something and was going to try to remove it that wayI did a windows repair and now when it starts up it is in safe mode and when I ge to the final screen it says "Cannot start in safe mode press enter to restart"Is there a way to switch to normal mode through setup?The option for F8 is boot orderIt's WindowsXPThanks!

Answer:I can't get into NORMAL mode and Safe mode doesn't work!!!

Yup, keep tapping F8 while the PC is starting, and then select normal mode.

7 more replies
Relevance 65.19%

Hi,

I have a desktop Windows 10 x64 machine that's been working fine for months/years. It was automatically updated from Win7 last year.

This morning I replaced the 2x4GB DDR3 memory with 2x8GB DDR3. This seemed to work though for some reason it works at 800MHz instead of the 1600MHz that the memory supports. The BIOS shows mem freq 1600 as expected. But this is the smaller issue. The PC worked booted fine.

When everything seemed to working as expected, I was still bothered by the slow startup and login times. Now with 16GB I had expected these times to improve.
I installed Windows SDK performance recording tool and set it to record the boot sequence and restarted the PC.

Windows failed to boot twice (UNEXPECTED KERNEL MODE TRAP) and went into the auto diagnostic repair mode. Restore just spins until I lose patience. I did manage to boot in safe mode and disable the recording. It did not help.

Running sfc/scannow "did not find any integrity violations".

I also managed to uninstall the Windows SDK/Perf Rec (by restarting the MSI service) - to no avail.

I ran the Windows memory test, but when it's done it reboots, the reboot fails, and I never did see the results.

I replaced the new RAM with the original ones, but this did not make any difference (BIOS setting are as they were originally).

I'm totally stumped!!

Please advise,

Thanks!!

Answer:Windows 10 Fails Regular Boot, Safe Mode boot OK

Hello adish and welcome to TenForums

The recent crashes are all suggesting the ESET driver eamonm.sys might be a factor.


Code:
BugCheck 1000007F, {8, ffff84001fc88b30, ffff840020108000, fffff8019ea3b196}

*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys

Try uninstalling the ESET remote admin software and see if this helps.

0 more replies
Relevance 64.37%

Hello,

Please help! A couple of weeks ago many functions of my computer ceased to work all of a sudden. It was just after I'd used Photoshop for the first time in ages as I don't usually work from home any more. The program had been producing errors when loading ever since I installed an updated version of Cry Engine, which installed a plugin for PS, so might have been something to do with PS if that helps?

Here is a list of the issues, all began simultaneously:

Computer will not shut down properly - just hangs on the logging off screen.
Safemode is just a black background. The only thing that appears is a wacom virtual keyboard interface.
Can't access control panel functions like system restore (asks for permission as normal but doesn't appear. When attempting to relaunch it says it is already running), networking, and can't add/remove programs.
Windows cannot install updates. It either freezes or tells me that another update is currently being installed.
Internet is intermittent but always appears offline in the tray at the bottom right. Clicking on or hovering over the network symbol does not bring up a menu.
Task manager does not open but the green square appears on the tray at the bottom right to say it's running.
Photoshop does not run. Also itunes, windows picture viewer and maybe more that I haven't tested yet. However, autodesk programs seem unaffected.
Sometimes startup fails in normal mode as well - following logging on there is j... Read more

More replies
Relevance 62.73%

I have a acer travelmate , xp professional.

I found out I got a virus an Hacktool.rootkit.
I couldn't get any chance to delete this *******.
So i try the last choise left : run a full scan with norton but in safe mode.

Well i change the boot.ini and select the safe mode.
Since then I've been able to boot my xp!
all the time is starts to reeboot is coming out a select options rebboting which none of them is the right to start xp.

Now Do you know any way for change the boot mode.

I really don't know what to do know!
I NEED TO AT LIST TRY TO TAKE OUT SOME IMPORTANT FILE FROM MY COMPUTER BEFORE LOOSE 'EM!!!!

thx
 

Answer:Safe mode doesn't reboot

8 more replies
Relevance 62.73%

I know there are many similair posts, but I can't seem to find one that is close enough. I've got a toshiba qosmio with XP media center. It boots up, goes to a desktop without any icons and will then restart repeatedly on its own. Safe mode won't even take it to the desktop without it restarting first. Any help would be great. Thanks.
 

Answer:keeps restarting, safe mode doesn't help

Do you have the Windows install CD?
1) If you do, put it in. When it says "Press __ to open Setup" or something similar, press the key it tells you to. Where it says Boot Order, make sure the CD rom is before the hard drive.
2) Reboot
3) It will say "Press any key to boot to cd..." (press any key)
4) Press R when it says "Press f8 to install, press r for recovery console"
5) Select your windows install by pressing 1, then enter
6) Type Administrator for the username, press enter
7) Leave password blank, press enter
8) type in fixboot and press enter. select y or yes if you get any prompts
9) when fixboot is done running, type in fixmbr. select y or yes if you get any prompts
10) when fixmbr is done running, type in chkdsk. select y or yes if you get any prompts
11) reboot and see what happens
 

11 more replies
Relevance 62.73%

When I try to get into the Safe Mode on my XP(HE), a bunch of white text runs through, and then it stops. All I'm left with is a monitor full of "scsi(0)disk(0)partition(1)\WINDOWS\..." lines.

The last line that it freezes on is:

"scsi(0)disk(0)partition(1)\WINDOWS\System32\Drivers\Mup.sys"

Last time I've waited few hours for something to happened, but everything was still the same as I left it when I came back.

Anybody know what the problem is?

Answer:Safe Mode Doesn't Start

Hello,Can you boot up the pc normally? If so, you can try going to start run and typing sfc /scannow after it has finished, try starting in safe mode.http://support.microsoft.com/kb/898900 if you jamms again at that point, you could try replacing the mup.sys.Hope this helps

4 more replies
Relevance 62.73%

I recently installed a new lcd in my laptop. The screen works perfect but there is one thing I was worried about, and thats that if any hardware got damaged at the time were i dropped my laptop. This is what happens. My computer starts up and I let it run, taking longer then normal (5 minutes) to get to the login screen. When i log in my hard drive light is a solid color and I can see its trying to boot, idk if its because something else is mest up or because the fall was to hard for it. At this point It took up to 7-8 minutes for it to just show my dekstop background (no icons, nothing but the background.) I then got a message after waiting saying my account has been corrupted. I then just thought i would go into safe mode, create a new name and transfer my files over. I then realised that I couldn't get into safe mode, i had the option to get into my cd drive or hdd drive or go to other options that don't have anything to do with boot up options. I tried loading the hard drive boot-up and wated for the option to go into boot menues and it never came. Any ideas? MUCH APPRECIATED!

Answer:Safe Mode Doesn't Show

If the laptop was dropped this is what i would do in this order:Remove the HDD access panel and remove / reseat the HDD...Re-boot and run the HDD FREE diagnostics from the drive manuf. site...Run chkdsk /r from either a command prompt and or Programs/Accessories/System Tools...Then go to Start/Run and type in sfc /scannow and hit Enter...Have your Windows CD handy as it will ask for it...

4 more replies
Relevance 62.73%

Hello,
Safe mode isn't working for me for few months, but only now I need it badly so I came here to ask for help.
What happens is that it gets stuck on the black screen with the list of .sys files that it tries to load.
I tried removing the .sys file that appears last when it gets stuck, but it didn't help.
Normal mode is currently inaccessible as well.
I have Hiren on USB.
 
I'm using XP Pro SP3, Ge-force 250GTS, Hitachi 1000GB HDD.
Any other info needed? If so, please tell me and let me know how to retrieve it from the computer.
 
Please help.
Thank you
Guy

Answer:Safe mode doesn't load

This topic already reported to staff and will be look into, this topic may need to move.
 
Thank you.

6 more replies
Relevance 62.73%

Hi everybody this is my first post i'm hoping someone can help. I've got a win 2k machine here that was working fine. to the best of my knowledge nothing changed but now it gets past the "Windows 2000 Professional" screen and gets to the blue screen with the little windows is starting up box and then restarts... no error message. If I boot to Safe Mode it works fine. Any ideas? is there a way to see a verbose mode at that point? I also tried copying msconfig from xp and used it to do a diagnostic startup to no avail. Thanks in advance
 

More replies
Relevance 62.73%

hi folks,
i just got this PIII machine w/ windows ME. this machine has not been run for quite a while, as per previous owner it has been in the shelf for more than a year, and i booted it up normally and took forever. before the desktop loaded it went to screensaver and can never get out of it. tried booting in safe mode and it seem ok. i tried defrag and no help. i tried system restore (2x) to last year's date and still no help. i did pcdoctor and all test came back ok. please keep your suggestions coming to get this machine working before i do a fresh install. thanks.

ibm (netvista??) 6276 model 34u
celeron 766
64 mb ram
 

Answer:doesn't boot normally, but safe mode ok

Why can't you get out of the screensaver? Does it ask for a password that you can't provide or what? If it's just a password go into the windows directory & delete *.pwd files . When asked for a password just hit enter.

In the long run best bet would be to reinstall the O/S, otherwise you don't know what else is wrong with it.
 

2 more replies
Relevance 62.73%

Hi,

my old computer has a problem . It's a PT 4 1.4 GB, Geforce MX 440 64 MB,Seagate HDD 80 GB, kingston RD RAM 384 MB, Intel Motherboard 850GB.
I reformated my computer and installed Win XP Pro SP2 new. The Installation was without any problem. But when I start up now it goes to the windows page for a very short time, then the black screen comes and after a while it restarts and the same thing happen again. I can go to the safe mode without problems. I tested RAM in safe mode and there were no errors. So what's the problem? Can it be the graphic card?

Thanks for your help.
 

Answer:win xp pro doesn't start, but can go in safe mode

6 more replies