Computer Support Forum

[b]SAMSUNG SP 2514N 250GB HDD[B]

Question: [b]SAMSUNG SP 2514N 250GB HDD[B]

Hi,

Just purchased a new Samsung SP2514 250 gig hdd and XP can only see 32239mb.

Tried using samsung's drive overlay to install xp, but gave up + uninstalled it -(the drive overlay).

I booted from the Xp cd + installed but XP only sees 32....gig's.

I have enabled big LBA by using EnableBigLba from www.48bitlba.com to no avail.

From searching through the forums, I see that a BIOS update may be necessary.

Do I also need to update my motherboard + chipset?

If so, are reliable updates available free on the net?

Any step-by-step instructions would be greatly appreciated.

Thx in advance

Relevance 100%
Preferred Solution: [b]SAMSUNG SP 2514N 250GB HDD[B]

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: [b]SAMSUNG SP 2514N 250GB HDD[B]

16 more replies
Relevance 82.82%

Hi, bought the hd a year ago loaded some data on it and put it on a shelf.
Recently changed from XP to Vista ultim. now pc doesnīt see the hd and I canīt find the driver sw, where can I download the software for this hd, samsung was of no help.
 

Answer:samsung 2514n 250 gb ext. hd.

12 more replies
Relevance 82%

Hi,

Pleas see attached screenshot.

This HDD is about 2 months old - can any1 tell me what this means??
 

Answer:Samsung Sp 2514n Hdd - Have I Got A Problem Here??

6 more replies
Relevance 72.16%

Hi, I bough a 250 GB Samsung SSD EVO 850.I got a Lenovo X201 computer.My SSD is not recognized by the MAGICIAN Samsung programso i cannot clone my HDD to my Samsung SSD. Please HELP me !!!

Answer:Samsung SSD 850 250GB not recognized by Lenovo X201 Samsung Magician Program

Hi, nocoin, and welcomeIs the SSD installed into the main bay of laptop or external USB box?Samsung Magician application is a tool not for cloning operation. Use Samsung Data Migration Software intead. It's a simple, free of charge, reduction of the Acronis True Image Home application.Then, after installing SSD into the laptop, use Magician app for disk management.Also, you might use another software for the cloning:Clonezilla, Macrium. As well Acronis ATIH full version (I'm not sure whether trial version supports entire drive cloning).

2 more replies
Relevance 65.19%

I've been looking at some of the features in Samsung Magician, and ran the Benchmark test twice. Both times I got very high scores, above the max listed in the program for all 4 tests. I have the drive set to MAXIMUM RELIABILITY. Just wondering about the scores reliability.

Scores in Parentheses are Samsung 's listed maximum high:

Sequential Read
549 mb (540)
Seq write
532mb (520)
Random read
97442 (97000)
Random write
70189 (66000)
 

Answer:Samsung SSD 840 EVO 250gb

Benchmarks are artificial at best [and a benchmark from the mfg is tailored to that particular piece of hardware] I would think you would get different results using a another benchmark program such as ATTO.

In short do not put too much emphasis on any given benchmark. Modern ssd drives are reliable and it should last for quite a while so I would not worry about the drive.
 

3 more replies
Relevance 64.37%

Hi folks,will my laptop work properly with this ssd? Does anyone have it installed in his thinkpad and can say more about it? Or maybe you recommend another drive thanks for your help

Answer:l540 + 250GB Samsung 840 Evo

Hi Phill7,
 
Welcome to Lenovo Community!
 
As per you are query we understood that you are looking for SSD drive compatibility for on ThinkPad L540.
 
As per the Lenovo technical specification ThinkPad L540 will support 250Gb SSD drive, please click here for complete details on the specification.
 
The SSD should be 2.5-inch.
 
Hope this helps!
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

1 more replies
Relevance 64.37%

This is just what is says. A fresh win 10 install on a new SSD. Do not explain to me about cloning.

To date I've upgraded the BIOS (UEFI) on a ASUS P67 Performance Gen3 motherboard. I've changed the SATA Mode to AHCI. I can see the drive in the BIOS.

The Windows installer the page where it lists the drive partitions. I only see one drive partio

Drive 0 Partition 1 239.9GB 232.8 GB Primary

I get the error
Windows can't be installed on drive 0 particion 1. (Show Detailes)

The New button is greyed out and when I select next I get

We couldn't create a new partition or locate an existing one. For more information, see the Setup log files.

Thoughts?

Answer:New WIN 10 Install on new SAMSUNG EVO 250GB SSD

Hello hiltonr92 and welcome to the forums. See if this will help Windows 10 - Clean Install

Are you installed in UEFI Mode? If so, when you boot from the USB drive use the entry that says UEFI and the name of your USB. If not in UEFI, boot from the name of your USB without UEFI in front of it. Delete all partitions on the drive until it says unallocated and then click the 'NEW" button. The installer will create all the necessary partitions. I hope that helps.

2 more replies
Relevance 64.37%

This is just what is says. A fresh win 10 install on a new SSD. Do not explain to me about cloning.

To date I've upgraded the BIOS (UEFI) on a ASUS P67 Performance Gen3 motherboard. I've changed the SATA Mode to AHCI. I can see the drive in the BIOS.

The Windows installer the page where it lists the drive partitions. I only see one drive partio

Drive 0 Partition 1 239.9GB 232.8 GB Primary

I get the error
Windows can't be installed on drive 0 particion 1. (Show Detailes)

The New button is greyed out and when I select next I get

We couldn't create a new partition or locate an existing one. For more information, see the Setup log files.

Thoughts?

Answer:New WIN 10 Install on new SAMSUNG EVO 250GB SSD

Hello hiltonr92 and welcome to the forums. See if this will help https://www.tenforums.com/tutorials/1...n-install.html

Are you installed in UEFI Mode? If so, when you boot from the USB drive use the entry that says UEFI and the name of your USB. If not in UEFI, boot from the name of your USB without UEFI in front of it. Delete all partitions on the drive until it says unallocated and then click the 'NEW" button. The installer will create all the necessary partitions. I hope that helps.

6 more replies
Relevance 63.55%

I replaced a Kingston 128GB SSD with a Samsung EVO 250GB SSD. Cloned Kingston SSD to new Samsung SSD using Acronis True Image.

Now, when I boot, it sits there for 30 seconds flashing the hard drive light blinking then proceeds to boot normally. All BIOS settings are default.

Hardware details in Specs.

Booting from the 128GB SSD was fine, no obvious delays.

Any idea what might be causing this? Could the new SSD be defective?

Answer:30 second boot delay with new 250GB Samsung SSD

Hey Rich,

Since it's for 30 seconds, it sounds like the time it waits before the default OS runs automatically. You might check to see if that may be it.

Startup Options - Change Time to Wait before Default OS Runs

15 more replies
Relevance 63.55%

Hi guys,

I was going to do clean install Windows 10 but there was an issue of GPT so I decided to convert into MBR. I didnt selected the volume by mistake and clean the whole disk.

Before there was 2 partitions

C: 150GB
D: 88GB

Now there is only 1 partition

C: 238GB

I have very important data on D drive and I am very confused right now.

Moreover, its still GPT and I also checked on Lupu Linux maybe if its on RAW but its not connecting through usb case.

Regards.

More replies
Relevance 63.55%

I added a Samsung EVO 250GB SSD. Cloned previous boot drive which was a 128GB SSD to it using Acronis True Image. Now, when I boot, it sits there for 30 seconds flashing the hard drive light then proceeds to boot normally. All BIOS settings are default. Lenovo IdeaCenter K450Intel 4th Gen i7, 16GB of ram Bootign from the 128GB SSD was fine, no obvious delays. Any idea what might be causing this?













Solved!

Go to Solution.

Answer:30 second delay since adding Samsung 250GB SSD

Hi Ztruker,thanks for psoting. Try uninstalling the the Intel Rapid Start software and let me know of the diffrence you see.REgards

5 more replies
Relevance 63.55%

Hello and thank you in advance for your help!

I bought a new Samsung 850 EVO 250GB for my old aging computer and this happened:

1. Cloned my old c: drive to the ssd, replaced it and everything went fine for a while until i started getting an infinite loop.
Windows wouldn't boot. Did a registry recovery via command line but my windows installation went to hell to forcing me to reinstall.

2. From this point everything went to hell, and after multiple windows reinstalls here's some of what happens:
- Windows installs but errors immediately follows;
- Some windows updates install but eventually start failing until windows update fails completely;
- Windows installs, updates install but eventually windows fails to load and enters repair mode claiming startup errors;
- Programs stop working for no apparent reason, some examples: Browsers won't run, file associations disappear (class registration errors), explorer;
- Driver problems with peripherals,
- File system corruption errors;
- I got situations where the computer would get stuck in a reboot/system restore/repair loop
- Automatic and manual restore points disappear making it impossible to restore to an earlier time;
- Changing the sata mode to IDE instead of AHCI seems to solve some of these issues but eventually the system locks up, the hdd light stays on, and after a reset the ssd doesn?t get recognized at startup. I have to power off to get it back but it?s the same all over again.

... Read more

Answer:Samsung 850 EVO 250GB, serious migration problems.

Have you attempted a clean install on the ssd yet, mine works just fine

5 more replies
Relevance 63.14%

Hi all I have a quick and simple question. Will Samsung SSD 250GB 850 EVO M.2 SATA 2280 fit HP ProBook 470 G3 (P4P70EA)?  Thank you for your time!

More replies
Relevance 63.14%

:hyper

My sons got me a Samsung 840 EVO SSD for my birthday . . . and it ROCKS! (That's right . . . I be the Dad . . . :major). Never used an SSD before and been wanting to try one out but I couldn't justify the expense at this time.

I was able to clone my existing HDD to the SSD with no trouble. The speed of this thing is amazing all by itself, but Samsung has a RAPID (Real-time Accelerated Processing of I/O Data) setting in its provided software that allows the use of up to one gigabyte of system RAM to use as a high-speed cache. This seems to more than double the sequential read and write of the SSD. I'm astonished! So far, so good.

On to my question . . . I've been putting various OS folders on my old HDD (all the Library files; Documents, Videos, Pictures, Downloads, etc.) but I was wondering if anyone could suggest any other files that would be wise to move from the SSD to my regular platter drive? I've researched this issue, and there is so much contradictory information out there I'm not sure how to proceed . . . so I came home to MG to ask

Thanks
 

Answer:Samsung 840 EVO 250GB Solid State Drive

I think I answered at least one of my own questions - It's apparently not wise to move the AppData folder to another drive besides the OS drive. I can't really think of any other caches or folders that would make sense to move.

I've moved I.E. temp files, all my document Libraries, and put a good few of my most used utility programs on my HDD. This seems to be taking some of the pressure off the SDD. I've had it installed and running since May 27th and have only written .17 TB to it. I intend to keep the games I am currently playing on the SSD. Though, from the testing I've seen done on this drive, longevity doesn't seem to be an issue with this model.

Ran another performance test on the drive after a reboot, and the Random Write (IOPS) results are insane! Top is the SSD of course, and I ran a comparison test on the 500GB Seagate Barracuda drive that had been my OS drive. SSD FTW!
 

24 more replies
Relevance 63.14%

Hi all I have a quick and simple question. Will Samsung SSD 250GB 850 EVO M.2 SATA 2280 fit HP ProBook 470 G3 (P4P70EA)?  Thank you for your time!

More replies
Relevance 63.14%

has anyone installed a Samsung 850 EVO in a dell 3542. ive seen older posts on net where people were unsuccessful. going crazy researching this drive. and if u did get it installed. was it WOW thats so much faster? 

Answer:anyone install samsung 850 evo 250gb in 3542 laptop?

Whether you can use one depends on which version of the system you have.
One version has a Celeron CPU (N30xx) and an embedded 32G eMMC drive - this one CANNOT  be upgraded to a 2.5" EVO SSD.
The higher line model has an i3 CPU and comes with a 500 G hard drive.  That model CAN be upgraded to a 2.5" EVO SSD.
Yes, the EVO will be immensely faster than a conventional hard drive.

2 more replies
Relevance 62.32%

I am curious what settings are recommended for Windows 8.1 when using an SSD for the OS. I have 2 additional Seagate 750gb hybrid drives for storage (1 dedicated for media center recordings and 1 for everything else)

More replies
Relevance 62.32%

Hello,

I have the following:

- Asus X99-Deluxe/U3.1
- Intel i7-5820K Extreme Hex Core CPU Processor (3.30GHz, 15MB Cache, 28 Lanes)
- Samsung 950 PRO NVMe M.2 256 GB Solid State Drive
- Asus STRIX GTX970-DC2OC-4GD5 NVIDIA GeForce GTX 970 Graphics Card

I have only the Asus Graphics Card in the PCIEX16_1 which is running at PCI-E 3.0 16x as expected. I have removed the USB3.1 card that comes with this motherboard for testing purposes so I literally only have the Graphics card installed.

The board has an onBoard M.2 x4 Rev 3 connector which the Samsung 950 PRO is installed into.

I believe this connector should allow 32Gb/sec bandwidth (since it uses PCI-E 3.0 x 4) - please note there is also an optional card where you can add the M.2 (or a second M.2) into a PCI Express slot - I'm NOT using this card, just the onBoard connector.

Samsung Magician says the following:
- Controller: Samsung NVMe Controller (Driver Ver: 1.4.17)
- PCIe Slot: PCI Express Root Port 1 - 2F03
> Link Speed Cur: 4Gbps, Max: 8Gbps
> Link Width Cur: x4, Max: x4
> Bandwidth Cur: 16Gbps, Max: 32Gbps

The performance data also suggests this - the read speed should be a lot higher but seems to be reduced, whereas write speed which is a lower number is over the actual "Upto Speed".

It appears as if my SSD is running at PCI-E 2.0 speeds? The bandwidth is being throttled. Any ideas how I make it go to 32Gbps instead of 16Gbps?

Thanks in advance!

Answer:Asus X99-Deluxe/U3.1 + Samsung 950 Pro (250GB) M.2 Speed Issues?

Believe it or not, I've just stumbled across the solution.

I am using high FSB Corsair Dominator sticks and had them using an XMP (Extreme Memory Profile) - essentially my memory was overclocked.

I thought I'd try running in "normal" mode ie. stock settings and when I checked, the Samsung Magician is now showing as 32Gbps!!

The motherboard must sacrifice something to run the Memory at the higher clock speed which means it can't run the M.2 at PCI-E 3 and has to drop it to PCI-E 2.

Worth baring in mind for anyone else trying to achieve these elusive 32Gbps speeds

3 more replies
Relevance 62.32%

Hey,

Can anyone please help me with the SSD Speed on Windows 7 x64 Professional?

I own the two HDD's in the picture, but the SSD has the same speeds like the HDD

I honestly don't know what to do as I have installed Samsung Magician and updated firmware, but there is no improvement...

Just bought the PC and it does not seem to perform as expected and I don't want any probs in the future....

My Rig is:
AMD FX-6300 3.5GHz 6-Core Processor
CPU Cooler Corsair H80 92.0 CFM Liquid CPU Cooler
Motherboard MSI 760GM-P23 (FX) Micro ATX AM3+ Motherboard
Memory Corsair XMS3 8GB (2 x 4GB) DDR3-1333 Memory
Storage Samsung 840 250 GB 2.5" Solid State Drive
Kingston SSDNow V300 Series 240GB 2.5" Solid State Drive
Seagate Desktop HDD 4TB 3.5" 5900RPM Internal Hard Drive
Video Card MSI Radeon R9 280X 3GB TWIN FROZR Video Card
Case Corsair 350D ATX Mid Tower Case
Corsair Enthusiast 650W 80+ Bronze Certified Semi-Modular ATX Power Supply

Any reply is much appreciated folks!
A beer from me to the lad that helps me out

Dan

Answer:Samsung 840 250GB SSD not performing correctly - 250MB on Windows 7

"I own the two HDD's in the picture"
what picture?
"the SSD has the same speeds like the SSD"
that sounds normal.

9 more replies
Relevance 62.32%

Hello,

I have the following:

- Asus X99-Deluxe/U3.1
- Intel i7-5820K Extreme Hex Core CPU Processor (3.30GHz, 15MB Cache, 28 Lanes)
- Samsung 950 PRO NVMe M.2 256 GB Solid State Drive
- Asus STRIX GTX970-DC2OC-4GD5 NVIDIA GeForce GTX 970 Graphics Card

I have only the Asus Graphics Card in the PCIEX16_1 which is running at PCI-E 3.0 16x as expected. I have removed the USB3.1 card that comes with this motherboard for testing purposes so I literally only have the Graphics card installed.

The board has an onBoard M.2 x4 Rev 3 connector which the Samsung 950 PRO is installed into.

I believe this connector should allow 32Gb/sec bandwidth (since it uses PCI-E 3.0 x 4) - please note there is also an optional card where you can add the M.2 (or a second M.2) into a PCI Express slot - I'm NOT using this card, just the onBoard connector.

Samsung Magician says the following:
- Controller: Samsung NVMe Controller (Driver Ver: 1.4.17)
- PCIe Slot: PCI Express Root Port 1 - 2F03
> Link Speed Cur: 4Gbps, Max: 8Gbps
> Link Width Cur: x4, Max: x4
> Bandwidth Cur: 16Gbps, Max: 32Gbps

The performance data also suggests this - the read speed should be a lot higher but seems to be reduced, whereas write speed which is a lower number is over the actual "Upto Speed".

It appears as if my SSD is running at PCI-E 2.0 speeds? The bandwidth is being throttled. Any ideas how I make it go to 32Gbps instead of 16Gbps?

Thanks in advance!

Answer:Asus X99-Deluxe/U3.1 + Samsung 950 Pro (250GB) M.2 Speed Issues?

Believe it or not, I've just stumbled across the solution.

I am using high FSB Corsair Dominator sticks and had them using an XMP (Extreme Memory Profile) - essentially my memory was overclocked.

I thought I'd try running in "normal" mode ie. stock settings and when I checked, the Samsung Magician is now showing as 32Gbps!!

The motherboard must sacrifice something to run the Memory at the higher clock speed which means it can't run the M.2 at PCI-E 3 and has to drop it to PCI-E 2.

Worth baring in mind for anyone else trying to achieve these elusive 32Gbps speeds

0 more replies
Relevance 60.27%

My laptop: Inspiron 15 5577 gaming laptop with intel chip (7th Generation Intel® Core™ i7-7700HQ Quad Core (6MB Cache, up to 3.8 GHz))
1. I disk cloned my 128GB M.2 SATA ssd drive using Macrium Reflect (v6.3.1812) by boot up using USB jump drive. 128GB clone->500GB thru usb 3.0 connection.  After the clone, I checked and see that all partitions are cloned successfully.
2. I swapped out my 128GB for Samsung NVMe SSD 960 EVO; I boot up using Macrium Reflect to clone my Samsung NVMe SSD  from my external usb 3.0 500 GB; after the clone, I disconnected all external devices and tried to boot up from Samsung NVMe ssd.  BUT IT FAILED.
I received the following error messages:
Rom image is not loaded
Rom image update denied.
Please let me know if someone had done this.
Thank you very much.
spjrc

Answer:upgrading my M.2 SATA 128GB SSD to Samsung 250GB PCIe/NVMe) SSD failed? help needed

What mode is system set for - AHCI or RAID?

1 more replies
Relevance 55.76%

ive never had this issue before and installed a few SSD drives before including an 840 and 2x 840 EVO's (RAID) - when i get to setup it says it "was unable to create a new system partition"

anyone know why this is>?

its replacing an OCZ 60Gb which never had this issue?
its going in core=i5 p67 system

there is a HDD on SATA3_0 and EVO SSD on SATA3_1 and DVD on SATA2_0 and USB mouse, keyboard & printer

help

thanks
 

Answer:Solved: Win7 install on Samsung EVO 250Gb will not install on the drive?

7 more replies
Relevance 45.51%

Hi, I want to buy a new hard drive for my desktop PC, and I was wondering if the western digital black 250GB hard drive or western digital enterprise 250GB hard drive would work better for such a PC. Both of the HDDs I mentioned are SATA, in case you're wondering.
 

Answer:Solved: western digital black 250GB vs. western digital enterprise 250GB

13 more replies
Relevance 39.77%

Samsung updated my Tab2 7 and now Adobe Flash which i had installed and working previously will not play web downloads. I have updated to the latest Flash player for Android from version 11.1.115.36 to 11.1.115.69 but this has made no difference. I have also checked for solutions on web and installed several browser plugins suggested but these don't seem to work. Unfortunately I use my Tab for a study course which has video content which I now cannot use. Has anybody else had this problem and if so found a solution?

Answer:Samsung Tab2 Flash player stopped working after samsung software update

I don't use Android any more but my understanding is that Flash is no longer supported by Android. Your course designers should be moving away from Flash. I assume from your post that you have tried this installation. If that doesn't work then I'm sorry but I'm stuck. If the course is viewed using the browser then you could try Puffin browser see Flash on Android

1 more replies
Relevance 39.77%

So I've done a little homework and have decided to purchase the new Samsung 128GB SSD and upgrade the 64GB SSD currently on my x300.  I want to image the existing hard drive and copy it in totality to the new hard drive via either Rescue and Recovery or Windows Vista Complete PC Backup (preferably the latter), then swap the drives to restore as I run a ton of application software and it takes me days to get everything installed and configured. With R&R I can't get that pig to run either under Windows or at boot from theThinkVantage button, always getting "Unable to copy file" error messages with "Access is denied." Windows Vista Complete PC Backup blows chunks with "Windows could not find backup devices on your computer.  The following information might explain why this problem occurred:  Catastrophic failure (0x80000FFFF) Please close the backup application and try again." I have an external Western Digital 750GB My Book USB with plenty of space and have successfully created an R&R startup disc.  If things get ugly I'm begrudgingly okay with re-installing all my apps (Office, Rational Application Developer, MS Visual Studio, SQL Server, etc., etc., etc.), but I'd rather not if I dont' have to and I DON'T want to lose the OEM install of Vista on the HD as I do not have my own media for that, though I do have a copy of the SWTOOLS directory off the root of the SSD for everything else, plus all my application software. Any advice appre... Read more

Answer:Upgrade x300 Samsung MCCOE64G5MPP-OVA 64GB SSD to Samsung MMDOE28G5MPP-OVA 128GB SSD

You want to image the thing right??? Use Acronis to image your harddrive... also you may want to burn yourself a copy of the recovery media. Then transfer the image into the new SSD harddrive.

5 more replies
Relevance 39.77%

 My company (bless their heart) bought me a T440s with the 500Mb SSD (installed by Lenovo).Per Device manager this drive was mfg. by Samsung and lists the ID string: device SCSI\Disk&Ven_SAMSUNG&Prod_MZ7TE512HMHP-000\4&90e12bd&0&000000 Yet the Samsung SSD managment tool:  "Samsung Magician" does not recognize the drive ....http://www.samsung.com/global/business/semiconductor/minisite/SSD/us/html/support/downloads.html Is there a Lenovo branded tool for this drive?I don't seem to find one here:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t44... Thanks!  













Solved!

Go to Solution.

Answer:500MB Lenovo installed SSD (mfg. by Samsung per device manager) is not recognized by Samsung s/w

Lenovo doesn't offer the such tool like "Samsung Magician". Only fw updater is in the list. I can't explain why Samsung's sw doesn't support its own OEM disk. Probably it's a bug of sw settings.

7 more replies
Relevance 39.77%

Problems on initializing Samsung 80GB with Samsung's Disk Manager: Ontrack(tm)

Hi!

There is some problem on my 80gb Samsung HD. The situation is this:

I have had an old computer which have an ancient motherboard.. because of the limitations of motherboard it was initializing Hd as 8gb.. I installed Samsung's Disk Manager program named Ontrack. It does something with the MBR to make the 8gb initialized HD as 80gb! When you're in bios setup, it says your samsung is 8gb but when you reset and wait for the system disk error message Ontrack activates and then your hd is 80 gb, you can install OS after that.

Here is the problem: I bought a new computer whose motherboard to initialize my 80GB hd as 80GB also, but things didn't happen like that. On bios setup it says my HD is 33gb.

I plugged the HD to my other computer and its partition magic 8 says "33gb BAD" also..

A modified MBR by a program (ontrack) can fool bios setup? if so, can i use XP CDs system recovery console with fixmbr command? ?f it is not how can i make my hd back to normal (not for old motherboards, initialized as 80GB)??

New motherboard is MSI RS482M2-IL and because of this problem I cannot enable S.M.A.R.T. feature. I need help and thanks from now on!
 

Answer:Problems on initializing Samsung 80GB with Samsung's Disk Manager: Ontack(tm)

If you are using XP then boot fromt eh XP Cd. Then delete the existing partition and create a new one and format that.
 

2 more replies
Relevance 39.36%

installed samsung 205bw software e1705 primary screen blank samsung became primaryLaptop is a Seco Epson 17.2 inch monitor, blacked out when we installed the drivers for the samsung 205Bw - Samsung to be secondary monitor is now ONLY monitor - no laptop even on batteries!  Laptop is a Dell Inspiron E1705 with nVidia 7800, 2 gig RAM -  can't 'see' the BIOs to correct the settings- total frustration.I know - should have used plug-n-play, what can I say - we were tired & brains OFF.  The samsung works fine as secondary monitor on our other laptop (no drivers installed - used plug-n-play).HELP - Samsung says it was a plug-n-play monitor (but doesn't say on paperwork), Dell says 'send it in & we'll fix it - for a fee', nVidia says they only make the chip set - Dell makes the video card.  My, aren't  we all covered - except this dumb customer....nosliw in deep dew-dew

Answer:installed samsung 205bw software e1705 primarry screen blank samsung became prim

I'm back with a sad tale, have sent the machine back to Dell twice.  First time they installed a new screen only (charged for screen & mb).  At this point we'd uped our service contract, 3 year guarantee on the whole machine (charge @$299). Machine came back and d__ thing blue screened me 10 or 12 times within 2 weeks, found someone to track what was really done, ie no new mb installed so got ready to send it back again.  When the packing box arrived there was an extra box - & in it was a NEW screen & a NEW motherboard - what, is this now a do-it-yourself repair?  Sent both boxes back , one to repair station the other to where ever it came from...  It's been maybe 3 weeks and yesterday I had 2 blue screens...  will this never cease.  Tried to check on my service - online there's no record of us having extended warranty --  Time to get paperwork straight etcOh, and did I mention, machine hasn't supported 2 screens since first 'fix'?....  Pam - I feel a cold winter coming...

1 more replies
Relevance 39.36%

I'm considering this phone but am holding off, I would like some feedback if the update resolves all the 8.1 issues and is being pushed out in the US?

Answer:Any U.S.A Samsung ATIV SE Owners Receiving Samsung 8.1 Firmware Update Yet??

I haven't heard of any news regarding an update on that front at all.
Considering the Icon and other Lumia's, Ativ's, HTC phones haven't received their respective 8.1 updates, I'm not enthusiastic about the almost unheard of SE, considering its circumstances as well.
Nothing so far...

2 more replies
Relevance 39.36%

I ran a performance test of the RAID1 (Samsung 951 PCIe-NVMe 512GB) and the Samsung 850 Pro 1TB which are both installed in my P70 (signature below). Here are the results:
 
Samsung 951 PCIe-NVMe 512GB RAID1
 

 
 
Samsung 850 Pro 1TB
 

Answer:Comparison between Samsung 951 PCIe-NVMe 512gb RAID1 vs Samsung 850 Pro 1TB

Just for comparison, here is my own P70 with 2 x 512GB 950 Pro (non-RAID) NVMe and also with 850 Pro SSD.
 
(1) Timings for NVMe0 (non-RAID):
 

 
(2) Timings for 850 Pro SSD
 

 
(3) Just wanted to point out that Samsung Magician supports "rapid mode" for one SSD (even if more than one SSD is present).  And it does not support "rapid mode" for NVMe.  But that means it could support "rapid mode" for the 850 Pro in my machine, and in fact I have enabled "rapid mode" for my 850 Pro.
 
Rapid mode utilizes unused and thus available RAM in the machine as a cache for the SSD, improving benchmark numbers dramatically.
 
Here are the numbers for my 850 Pro with "rapid mode" enabled.
 

 
 
 
 

9 more replies
Relevance 38.95%

Hello, Last week i did a upgrade on my Inspiron 15R SE(7520) with a SSD Samsung EVO 850 500GB, and now i'm intending to buy one msata Samsung EVO 850 500GB, But i would like to do a RAID 0 with those two "drives", So is that possible? Will it work and have a gain of performance?
Sorry for my bad english, i'm still learning.
My Specs (Inspiron 15R SE (7520)
Intel Core i7 3632QM
8GB ram 1600Mhz
Primary: SSD Samsung EVO 850 500GB
msata: 32GB MZMPC032HBCD
Secondary: Seagate ST1000LM024  5400RPM 1TB

More replies
Relevance 38.95%

Trying to install Samsung SmarThru office V2 for my printer/scanner, but Windows 10 reports the signer of the executable is not trusted, I downloaded from the Samsung website and the signer is shown as Samsung.

There seems to be no way to bypass this, anyone have a clue whats going on?

Answer:Samsung SmarThru Office v2 - Samsung not trusted as a signer

Scalextrix said:

... There seems to be no way to bypass this, anyone have a clue whats going on?



So it means you tried advanced startup setting to enable installing of unsigned drivers?
http://answers.microsoft.com/en-us/i...336d248?auth=1

Because for me SmartThru 4 installs fine, (all Win10 updates installed), but ->
* I can't install old print driver (says hash file missing, maybe tampred or corrupt).
* I can install universal print driver & scan driver
* After opening, ST4 is unable to recognize scanner.

3 more replies
Relevance 38.95%

I have a Samsung SSD that I recently formatted and installed Windows 7 64 bit on. I tried to use Samsung Magician software but it tells me that "Magician cannot communicate with the below Samsung SSD. Please check with other compatible storage drivers and try again. 1. Samsung SSD 840 EVO (etc)"

Upon some investigation, it appears this is because the SSD is listed as SCSI in device manager. I was wondering if there were any way to fix this so that the Samsung Magician software can communicate with the SSD
 

Answer:Samsung SSD listed as SCSI; Samsung Magician not working

HI

What Motherboard make and model are you using and what controller do you have the SSD plugged into as if its the Marvell (JMicron ones can also cause this) controller then that maybe your issue as at times the Marvell controller will list in Windows a SATA drive as SCSI, pita!!

So if you can swap the SSD into a Intel controller then that should fix the issue, just make sure that the drive is listed in the BIOS and as 1st boot device.

Are you running in the BIOS RAID Mode and if so that could also be a source of the issue. Really need to be if not running RAID to be in ACHI mode in the BIOS.
 

2 more replies
Relevance 38.95%

hi I have samsung laptop

When I press power button, then its shows me samsung logo on the screen and after that it goes to black screen.
I try to replace hard disk, laptop find this new hard disk.
but then it straight goes to the BIOS and over there I try to change boot order, to boot from dvd player but I couldnot find any option there.
I open it up and clean everything inside the machine.
but problem is still there.
Is anybody help to to fix this machine.

REgards
loke_itp
 

Answer:Samsung black screen after showing the samsung logo

bump
 

1 more replies
Relevance 38.95%

Trying to install Samsung SmarThru office V2 for my printer/scanner, but Windows 10 reports the signer of the executable is not trusted, I downloaded from the Samsung website and the signer is shown as Samsung.

There seems to be no way to bypass this, anyone have a clue whats going on?

Answer:Samsung SmarThru Office v2 - Samsung not trusted as a signer

Scalextrix said:

... There seems to be no way to bypass this, anyone have a clue whats going on?



So it means you tried advanced startup setting to enable installing of unsigned drivers?
http://answers.microsoft.com/en-us/i...336d248?auth=1

Because for me SmartThru 4 installs fine, (all Win10 updates installed), but ->
* I can't install old print driver (says hash file missing, maybe tampred or corrupt).
* I can install universal print driver & scan driver
* After opening, ST4 is unable to recognize scanner.

3 more replies
Relevance 38.54%

I wanto buy a samsung evo 850 ssd which is expensive for my budget but i think itll be worth it...
I need advice as i dont know if i need the 500gb as opposed to the 250gb.
Ill only be having my os and a maybe 2 games (overwatch and league of legends) and ill only be watching youtube and movies and doing homework via microsoft office. Will 250gb run out easy if i get it?
Thnks in advance.

More replies
Relevance 38.54%

As the subject line says, I'm looking for a 250Gb HD to add a second HD to my main PC.Any suggestions/recommendations?Cheers

Answer:Which 250Gb HD should I go for?

That it's an E-IDE drive that I'm after, not a SATA one.

8 more replies
Relevance 38.54%
Question: 250gb and beyond

Hi all first post and yep theres a problem.... first the specs
MSI 915P Neo2 Platinum board
64bit amd chip
2gb crucial ram 3500
MSI FX5900SP VTD256 ddr
100gb ide
deskstar 250gb ide
deskstar 250gb ide
3 yamaha scsi dvd writers

quite a simple problem you would think....i need both of the 250gig drives to be unpartitioned ( os on one drive). so its down to the 137gb problem. all of the solutions i have read so far is based on the sp1 and sp 2 route .I.e format the drive at 137gig then install windows xp pro and, then update with the pro pack and the drive should be showing at 250gb , im not having too much luck with this approach has anyone any other ideas ?
 

Answer:250gb and beyond

7 more replies
Relevance 38.54%

Hi guys, I want to connect my ps3 hard drive on pc to use it on pc, so when I get my new computer I can use it with it straight away, but right now I want to use it on my current pc, I plugged in both the one cable and the other one (sata), that goes from power supply cable to the HDD.

when I booted the pc it said installing device drive software, and said, device is ready to use, I go to my computer, and it ain't there, do I have to set it as secondary in bios?

Win7 Ultimate final rev

It's automatically set as fourth IDE master. restarted pc and still doesn't show up, I heard I need to format, is that true? like that to know if I should re-gain windows 7 disk

Oh and t's actually 320gb
 

Answer:250gb hdd ps3 on pc?

Open up Disk Management (in the admin tools control panel), it should show up in there. I'd delete all the partitions and create 1 new one that incorporates the whole disk. Then format as NTFS.
 

6 more replies
Relevance 38.13%

I quite fancy one of these BDD5500s as it states that you can get BBC I-player and others through it. However it says that it's wifi ready and that you can buy a wifi dongle for about Ģ45. With Sky my free broadband only allows me 2gbs of download a month which is normally ok for me but -player etc., uses up too much so I don't want to use my Sky broadband wifi for this player.
I don't really understand how a Samsung wifi dongle works as far as subscriptions are concerned. Is a one off purchase sufficient or is there a monthly subscription required to some provider?
Thirdly does a 3d blue ray player work fine with an ordinary HD Samsung TV?

Answer:samsung tv and samsung bdd5500 smart hub player

A wifi dongle gets its data from a wireless network. You have to pay at some sites eg hotels to get access to their network. In the home it would be free. I don't think that there would be a subscription otherwise. But I note your download limit and I think that it would be using your Sky broadband.
No idea about the 3D. Suggest you enquire in a showroom.
ps 3G dongles have a subscription.

1 more replies
Relevance 38.13%

CLONE FAIL FAIL FAIL

So I have a Haswell i7 rig (GTX 780) with Platinum PSU etc etc... W8.1 Pro (and a few other W8.1 PC`s I tried the clone op with also)........

.... and on the SSD to clone in question, it is a Samsung EVO 250Gb SSD. It seems to work perfect.
But its getting near full~ish.... (30Gb spare)....

... so I bought a Samsung EVO VNAND 500Gb.... (twice the capacity) and thought an easy clone was in store....

(I also have some additional drives I have just disconnected for the Clone op [as the Samsung clone software was being stupid [trying to get me to clone my documents drive to my new SSD]). With or without the other drives connected, it FAILS, FAILS, FAILS.

So; when I try to clone, It gets to about 33% cloned, and then fails.
Time after time.

Recent ERROR MESSAGE is:- "Failed to retrieve source information 205500(0322bc)"

I tried to clone the SSD to SSD on a CLONE machine/Box. A FAIL
I tried to clone using Macrium Reflect. A FAIL
I tried to clone using EASEUS. A FAIL.
I tried them all a few times including the SAMSUNG CLONE Software.
FAIL FAIL FAIL FAIL FAIL

What am I doing wrong?

Is there a problem with the 250Gb SSD I don`t know about (I am using this PC with it in now)...

Or will a SAMSUNG EVO not clone to a SAMSUNG VNAND ?

Do I have to try everything including disabling features such as RAPID MODE? And Disable Performance and everything?

Or what???

I have been a dozen hours trying to do this simple task.

P.S.
I tired to contact SA... Read more

Answer:CLONE FAIL SAMSUNG SSD to Samsung SSD Fails on every PC

Create a recovery CD with Macrium(Win PE Rescue), back up your current SSD to an external HDD, install 500GB SSD and boot with rescue CD( Win PE) and restore the image from the back up with Macrium Reflect.
Or
Try this utility, I have cloned with this a while ago: AOMEI Windows Backup, Cloning, and Recovery Software

17 more replies
Relevance 38.13%

Found this app in the Windows Store:http://forums.windowscentral.com/e?l...token=MyDWkYPt
(in Norwegian) Refers to settings for something called Galaxy Book. Anyone heard of this device?

More replies
Relevance 38.13%

Hi guys, i'm using win 10 pro x64 on a samsung evo 850 120gb ssd. My samsung magician just can't recognize the OS, anyone knows how to fix? Thank you and sorry for my bad grammar!

Answer:SSD Samsung Evo 850 & Samsung Magician RAPID mode

Nope - Unless you really need a deep queue service, it's snake oil anyways. You can following an ongoing conversation here: Samsung Magician

15 more replies
Relevance 38.13%

I have both Linux and Windows Vista installed on my notebook. Today when I turned it on I accidentally chose "Samsung Recovery" instead of "Windows Vista" in GRUB. After Samsung Recovery has loaded, I quit it and the computer shut off. I turned it on again and now it doesn't make it to the GRUB, it shows the Samsung logo, then "boot from ahci cd-rom", and then it reboots and shows the samsung logo again. I can enter BIOS (F2), but can't enter Samsung Recovery (F4) anymore (after showing "please wait..." the computer reboots again). I tried setting the BIOS back to default but it didn't help. Any input would be much appreciated...
 

More replies
Relevance 38.13%

In this discussion, Amy from Lenovo recommends that we purchase Lenovo SSDs if we want thermal management: https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/Can-I-add-a-Samsung-950-Pro-NVMe-SSD-to-... The link no longer directs us to a particular model. So I perform a search on the Lenovo site and see (among others) this model: ThinkPad 256GB SAMSUNG PCIe NVME TLC OPAL M.2 SSD http://www3.lenovo.com/us/en/accessories-and-monitors/memory-and-storage/storage/HDD-BO-ThinkPad-M-2... What is this? A Samsung SSD rebranded as a Lenovo SSD? Would I gain in compatibility with such a drive or not, and specifically regarding thermal management? Also, is there a misprint below concerning the read speed? "ThinkPad 256GB SAMSUNG PCIe NVME TLC OPAL M.2 SSD supporting PCIe 3.0 interface standard up to 4 lanes shows much faster performance than previous SATA SSDs. It's sequential performance is up to 300MB/s for read operation and 1700MB/s for write operation by 4 lanes. Test-Prove 100% Compatible with ThinkPad machines. " That has to be 3000MB/S, right? 

Answer:Thinkpad-Samsung or Lenovo-Samsung NVMe SSD? What is this?

My impression is that even Lenovo themselves does not have a clue.

1 more replies
Relevance 38.13%

Like you, I encountered source disk bad sectors error when cloning with Samsung migration software. Resolved by using EaseUS Tool to clone.

Answer:Samsung data migration cannot recognize my Samsung SSD 840 EVO

Try to connect it to a USB 2 port instead of a USB 3 port. That worked for me...

1 more replies
Relevance 38.13%

Hello HP Support. I have spent now 3 days trying to find the latest firmware for Samsung MZ7TE256HMHP-000H1 aka HP P/N: 742038-002 Samsung PM851 Model: MZ-7TE2560 Which is an OEM of the Samsung Evo 840The latest firmware would address the write slow issue.The current firmware on the SSD is: F/W: EXT09H0QWhat I need is the tool or the software to update the SSD to: F/W: EXT0DB6QAnd the Samsung Firmware update image and tool doens't detect the OEM drive.Scouring the donwload section of HP support doesn't show the firmware update tool. HP EliteBook Folio 1020 G1 HP P/N: 742038-002P/N MZ7TE256HMHP-000H1 Samsung PM851 2.5" 256GB SSDModel: MZ-7TE2560   

Answer:Samsung MZ7TE256HMHP-000H1 aka HP P/N: 742038-002 Samsung PM...

@StevenKhieu? To better help you we would need the exact model number or product number of your laptop/desktop??? http://support.hp.com/us-en/document/c00033108 REO

2 more replies
Relevance 38.13%

Hi
I have looked through previos questions but couldn't find a solution. I have a 250g USB driven HDD not recognised by ny PC. I used the HDD on my TV so I think it will probably need reformatting. When plugged in it appears in Disk Management but without a drive letter and when I right click on the drive most of the options, including allocate letter are greyed out. Any solutions?
TIA

Answer:USB 250GB HDD not recognised by PC

I would recommend PartedMagic, it is now paid for software, but at only $4.99 it is a sound investment. Download it, burn it to a cd or put it on a USB stick and boot from it.
Have the suspect drive connected and PartedMagic should be able to see it and it will enable you to format the drive, whatever the existing filesystem is.

4 more replies
Relevance 38.13%

hello,i have installed a 250GB Western Digital Caviar HD on my system. but i cant seem to get the full 250 GBi have installed XP PRO and service pack 1 but its showing 233GB and it says that its using 106 GB i dont know what to do to have the full 250GB showing, you guys have any pointers pleasethanksVJP4 3.2Ghz HTAsus P4 C800 E-Deluxe512mb PC3200 DDR RAMSapphire All In Wonder Radeon 9800 ProWestern Digital 250 GB Hard DriveAntec 350W PSU

Answer:cant get full 250GB

The drive manufacturers reckon a kilo is 1000 (reasonable, I suppose), but the rest of the computer world regards it as 1024.So a 250Gb drive is 250/1.024/1.024/1.024 = 233Gb.

2 more replies
Relevance 38.13%

Hello, I'm hoping I can find a solution to my problem here as I couldn't find one elsewhere on the net.
I have a laptop and currently have a 120GB hard drive in an external enclosure. I have just bought a new 250GB hard drive and have installed it in the external enclosure. Though partitioning and formating the 120GB was a breeze, I've had nothing but problems with the new 250GB.
Below are the specs of what I'm working with. In both Partion Magic and in the Win2000 Disk Management, it correctly displays the 250GB drive (233GB). Regardless of which program I use (ie. Partion Magic, Win Disk Management, command line FORMAT) I get problems.
Generally, what will happen is it will partition fine. Then it will begin to the formatting process (VERY slowly) and then either throw an error either during or at the end of the process. And this is when I try to format a very small partition (ie. 100MB). I have successfully formated a 10MB partition. On a large partition (ie. 30GB) the format process will start but will not progress.
The only two things I can think of is that the drive is faulty, or because I am booting my OS from a floppy there is some sort of recognition problem.
I can't run the diagnosis software from Maxtor because that requires the drive to be installed internally.
So any help to this problem will be greatly appreciated.
Additionally, how long should it generally take to format the 250GB drive in its entirety?

Comp: Toshiba Satellite 2805-S201
OS: Win2... Read more

Answer:What's with the 250GB Drive

HHhhhhhmmm...sounds like a bad drive to me. Do you have a desktop computer that you can use to attempt to format the drive??

4 more replies
Relevance 38.13%

Hello, I just ran out of room on my 500GB HDD, Its a 7200 RPM and I like the speed of it. I started looking for a new HDD when I came across an 60GB SSD. I never thought of buying an SSD before. Now I can't decide if I should get the SSD or the HDD ( same price) I need a new drive for linux, but my current drive only has 3GB left. I was going to partition 30GB to linux and keep 30 for Windows. Then transfer my OS to the remaining 30GB, that would free some room. I am a gamer so I need alot of room for games. If I get the 250GB HDD then I would have alot of room for more games and linux. But then I would not be able to boot Windows 7 in seconds. What should I get?

My specs:
Intel core i5 2500K ( stock speed )
MSI - H61M-P20(G3)
8GB of Vengeance DDR3 RAM @ 1333 CAS 7
GTX 550 Ti 1 GB ( Overclocked )
1 500GB 7200 Western Digital Caviar Blue HDD
500W PSU.

Answer:SSD 60GB or HDD 250GB?

Go with an SSD. If you choose the 60GB SSD, you will have just enough space for the OS and a Office Suite and a few other apps before you start to run out of space. If you can afford it, go with a minimum of 128GB SSD as your primary drive, then wipe your 500GB mechanical drive and use as a storage drive.

3 more replies
Relevance 38.13%

hi ,everybody i have a dell d600 laptop with a 40 gb harddrive and 2 gb memory . my question is i am trying to install a 250 gb harddrive ,but the laptop doesn't recognise the drive ,so i can't install windows on it . i even bought vista .the laptop won't recognise the drive .help
 

Answer:250GB Hdd Not Recognized

Hi,

What do you mean the laptop won't recognize the 250GB drive? Do you mean in the BIOS? When trying to install Windows? You can try to download a linux LiveCD like Knoppix or Damn Samll Linux and boot from that (F9 or F12 at the Dell BIOS) and see if it sees it. If so, format with QTParted or Fdisk and then try Windows again. Maybe the drive is bad.

Let me know if this helps.

Adrian
 

1 more replies
Relevance 38.13%
Question: SIMPLEDRIVE 250GB

I HAVE A SIMPLEDRIVE 250GB MOD # 96300-40001-001 THAT IS NOT WORKING I CAN NOT ACCESS IT ON A DESKTOP OR LAPTOP ANY THOUGHTS?

Answer:SIMPLEDRIVE 250GB

Hi and Welcome to TSF!

Please do not type in all caps. It is considered rude and yelling.

How have you gone about connecting the drive to your PC?

Does Disk Management see the drive?

11 more replies
Relevance 38.13%
Question: 250gb hd problem

Hitachi 250gb hd, was working fine, everything was ok. It was split into two partitions a 128Gb clip, and a 104 gb clip. The 128gb clip had information on it. Now the drive is recognized in bios properly. When it boots to windows it comes up as 8gb, and has information on it, but I can't access it. One more thing the drive now says fat, when originialy it was ntfs. Under manager, The drive says it is split at 138g and 104 gb. Any ideas? when I run a drive test the drive says it has a bad cable, I swapped the cable out three or four times, to no avail.

I think I have it all listed, oh windows xp home, installed on it's own drive.
 

Answer:250gb hd problem

Has nothing to do with drivers or Spyware, it is more of a Bios issue. What is the manufacturer and model of the computer that this drive is in? Also, do you have SP2 installed for XP?
 

5 more replies
Relevance 38.13%

Maxtor 250

Just put a Maxtor 250 GB into my mate's machine, Maxblast3 will only let me have 137GB, Windows XP will only see it as 31.4GB. I've managed to partition & format it in my own machine correctly but when I put it back in his, it F***s up again

I've updated the Via 4in1, the bios is already updated to the latest version

I'm guessing a new MB is in order ??????
 

Answer:Maxtor 250GB seen as 137

i've had that 2 with my 200Gb, windows only allowed 138Gb
do you have SP1 installed cuz that seemed to do the trick on with my 200Gb


:grinthumb The best of Luck :grinthumb
Greetz Selage
 

10 more replies
Relevance 38.13%

Hi My os : Win10 64 BitSSD : 250GB SamsungBefore posting here I searched here for a solution and i only thread that i find is here l Even if i shrink many of the software out there clones entire disk! Tried Macrium Reflect as per a CNET video, it says not possible to clone to my 250 GB ssd and my C drive is only 105GB with some software like AutoCAD etc.Any solution for this ?

More replies
Relevance 38.13%

My T510 is getting that and i'm not sure if it's enough space or speed.   is $63 dollars worth a 320gb 7200rpm hd?

Answer:Is 250gb 5400rpm hd enough?

whether it is enough depend on how much programs you have and how much you store on the laptop. 

4 more replies
Relevance 38.13%

Hi,
I just bought a maxtor DiamondMax10 250GB HDD...
and i bought an external case so i can use it on my laptop(toshiba A-50)..

I have used a 400GB external Drive on the same laptop before..
I have also used 200GB external drive before on the same laptop..
all of my previous hdd were western digital....

The problem is:
I wanted to format (partition) the hdd... but the computer said that the capacity (unformatted) is around 2 TB
i tried to format it as one partition, it wont do it...
I tried to minimize the capacity to an acceptable (close to real) level (set it to 230Gb) but it wont do it...

I tried to format it using FAT32, and it worked but to a maximum of 200Gb, it is ok... but the problem is that i can only use 10 GB after that the harddrive gives an error (write-protected)...

1- have anyone used Maxtor drives before as externals???
2- Have any one came across this problem before ???
3- Will it work in a normal PC or not?? (just to format it)... because getting a pc in here is quite difficult

Thanks in advance....

NOTE:
I used the windows XP disk managment tool...
and i used also Partition Magic 8.0....
all with the same results...
 

Answer:problem... 250Gb Hdd is seen as 2TB !!

What external are you putting the drive in?
 

3 more replies
Relevance 38.13%

I've recently installed a new MSI KT3 Ultra motherboard, and a new 250 gig western digi hard disk. Now, in the bios it recognises that the drive is 250 gigs however when i setup xp it only recognises it upto 130 gig and won't see the full size of the drive.I know 48-bit LBA mode addressing needs to be enabled and as far as I can see it is turned on in the BIOS and as i say, the bios recognises it as 250 gig but windows doesnt and only shows it as 130 gig.Any ideas?

Answer:BIOS Says 250GB HDD... XP says 130?

bump

3 more replies
Relevance 38.13%

I purchased a new samsung eco drive 1tb hdd to add on to my custom built pc. I currently have the 250gb partitioned with xp on it. I installed XP on the new 1tb and when i have both hdd hooked up, XP gets a blue screen of death with the 250GB... if i unhook either one of the drives and run them alone, they run fine.
I updated the bios, chipset drivers, etc...
 

More replies
Relevance 38.13%

Hello,
 
I do not know what happened.. but I lost... 250gb+ of my files in my laptop. On the HDD where was 40gb free space now there is 326gb..
Most of my programs that I had... they just disappear... same with the movies.. (but for example .3gp files still are there)
Moreover, option "restore system" was disabled...
 
Those are logs from the OTL.. I dont know if it will help...
OTL - http://wklej.to/wfa5K
Extras - http://wklej.to/l4yKb
 
I gave this laptop to a computer shop.. but all they did was trying to install antivirus.. then they did that checkdisk when you start the computer... before the login window (it took like 2h or maybe even more)... after that I took the computer back...
Now I dont know what to do, because files can be overwritten, due to the system partition.
And giving this laptop to a professional shop that is specialized in restoring files will cost me SO MUCH.
 
I beg you for help... on the HDD I had very important things
 
Thanks in advance,
 
Greetings,
 
Btw: Sorry for my english.. I hope you can understand everything

Answer:250gb disappear from hdd

Hello, please repost your question with the full OTL log here so we can advance.
 
Virus, Trojan, Spyware, and Malware Removal Logs

1 more replies
Relevance 38.13%
Question: Deskstar 250Gb Hdd

I just bought a new deskstar 250Gb Hdd which I am trying to install in my Compaq Pressario S3190UK

I know its got to be set to slave but I wasnt sure if I should set it up as a
16 head, a 15 head , 32 byte clip or auto spin dissable and all of those choises are available on the drive

I went for 16 heads and booted up

In " my computer " the new drive does not appear ( I still see all my original drives there) yet in System/Hardware /device manager it shows up under drives and on clicking its properties it says this device is working properly

Without seeing it in the " my computer folder " I cant really format or partition it so I then tried partition magic
That saw it fine and reported its size correctly . I told it to create an ntfs partition and use all the drive . It changed color as it should and all that was left was to click on make changes now but when I did that it went straight back to tell me the new drive had no partitions created

I tried various combinations, of primary or logical drive , small or large partitions and fat or ntfs but always it refuses the last step of actually creating the partition .
What am I doing wrong ?

Regards

Don
 

Answer:Deskstar 250Gb Hdd

First I will assume your drive is showing up as the full size in the bios and is corrrectly identified.

If you are using either xp or win2k. Go to disk management; start>run type in diskmgmt.msc and hit enter. See if your drive shows up there; it should be listed as disk1, disk0 will be the master drive. If it shows up there, you need to partition and format the drive. Right click on the drive and choose to create a partition; I like extended partitions for data / storage drives. After you create the partition, right click again and choose to create logical drive. You can make the entire drive one partition or organize it into say 3 logical drives; whatever you want. After you create the logical drive you will need to format them. Again right click on the logical drive and choose format. Use ntfs for your drive. In fact if you use partitions greater than 32 gig, fat32 is not even an option.

Just think about how you want it organized before you start.
 

3 more replies
Relevance 38.13%

I have two 250GB hard drive in my pc and I'm trying to install Windows XP Pro SP2. It's running on an Abit motherboard with Athlon 64 dual core 4400+ CPU. I got the computer from a friend and decided to do a clean install so I deleted the previous partions and made a new one. It went through the whole formatting process fine then went through the windows setup. It then did an automatic reboot but right after POST it gave me an error message. It said Trap followed by 0000005c ==============EXCEPTION=========================== and a series of hexdecimal messages afterworsd. I've done this twice and had the same problem and I just wanted to know if you guys knew anything about this?

Answer:Installing Win XP Pro SP2 on two 250GB HDD

Greetings gfx dude, Welcome to TSF!

Firstly, you only need to install the Operating System one ONE of the HDD's not both of them.
The second HDD can be connected as a "Slave" and can be used to 'save' everything that you download, plus emails and other data, such as music etc.
I suggest that you check the CD for scratches and marks; wipe it very gently from the centre to the edges with a lint free cloth.
To give you the best chance of getting Windows? installed without hassles, such as those you are experiencing, is to completely wipe the HDD with Darik's Boot N Nuke.
Wiping the HDD this way will completely erase everything off the HDD and take it back to a RAW unformatted state, as if it had just come out of the factory.

Just so that you do not forget anything when doing the installation, please read this...

The Windows? XP Installation Check List.

1. The Windows? XP SP2-CD (naturally)

2. Darik's Boot N Nuke (Click the coloured Link).

3. Please read this guide.

4. The Motherboard CD that contains all the necessary Drivers etc.

A couple of tips...
a. Darik's Boot N Nuke will take about 4? hours to completely wipe the Drive; however, this will vary depending on how big the Drive is. (That estimate is for a 80Gb HDD).

b. When you get to Figure 7 in 'The Guide', you can create more than one partition here by simply telling Windows? how big you want it. Should you do decide to create an extra parti... Read more

1 more replies
Relevance 38.13%

hello i have formatted my new Portable HD after 4months but its showing used space 97mb can anyone pls tell me is that normal or is there sum problem ? i mean it should show used space 0 bytes ?

Answer:WD Portable 250GB HD

Is the file NTFS or other i.e. FAT32?

7 more replies
Relevance 38.13%

Hi,

I'm sure this is simple, but I can't figure it out and searching google hasn't found me any answers. I am building a new system. It all works fine. But I have a WD 250GB hard drive I"m using. When I boot from WinXP Pro CD, and go to format the drive and install the OS, it only tells me I can format 130GB of space. Nowhere to be found is the rest of my drive...

Any thoughts as to what I"m doing wrong here?

Thanks!
Kimberly
 

Answer:XP won't format whole 250GB HD

Hi, if the version of Windows on the install CD pre-dates Service Pack 2, you will get this problem.

Microsoft added the ability for Windows to see hard drives bigger than 137 GB in Service Pack 1 (and Service Pack 2).

If you have access to another PC, download Service Pack 2 (which includes Service Pack 1 btw), and integrate it into your install source and burn a new CD from which you can install. You can find good instructions for doing that here:

http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp

You can download Service Pack 2 (full 266 MB package) from here:
http://www.microsoft.com/downloads/...BE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

As a workaround, you can create a partition less than 137 GB, install Windows, and then install Service Pack 2 and you will be able to access the rest of the hard drive. Then you can partition the rest from the Computer Management interface (right-click "My Computer" > Manage...)
 

2 more replies
Relevance 38.13%

Hi

I've recently reinstall a fresh copy of XP Pro, I got a Gigabyte 8inxp MB, a WD 250GB install on primary channel as Master, with 2 partition, 125GB each

I've also got a Maxtor 250GB connect to ATA133 card

Before, I got everything up and running , then I install Maxtor drive, card, and Maxblast 3

and I have drive C = 125GB, D = 125GB, and G = 250GB(this is the Maxtor)

then I do a boot-from-cd and install a fresh copy of XP Pro
now I cannot see my Maxtor

I tried to use my Maxblast3 software to mount the drive, but it say it only detect the Windows drive, therefore it won't let me run

When I tried to run Maxblast3 in DOS (from a floppy), I have to format and erase everything, I don't want to do that, I have some important documents on that drive that I do not want to lose

all drive were NTFS
 

Answer:Cannot see my Maxtor 250GB

10 more replies
Relevance 37.72%

I tried to ghost my 60G disk onto 250G on a different computer and it finished OK. But when connecting the new drive (250G) to my T60 it would not boot. Booting from Windows CD showed that all directories were ghosted correctly.What could be the problem?













Solved!

Go to Solution.

Answer:T60 changing disk to 250GB

don't use Ghost use Acronis TrueImage. 

8 more replies
Relevance 37.72%

Hi to allI have just installed Maxtor 250GB HD into my P4 PC. Cmos bios reports the HD as 250GB during POST and Win XP C: drive properties reports that capacity is 250GB and used space is 134GB!!The only thing on the drive is the OS (winXP) it was brand new I partitioned/ formatted it using my XP cd. If I look at the properties individually on C: drive (windows, program files, docs and settings, etc) they add up to approx 1.5GB but C: properties is 134GB?any suggestions as to why XP is reporting the use incorrectly and a possible fix much appreciated.TIA

Answer:250GB HD showing too big used space

I recently installed a pair of 160gb drives and found on the Maxtor site that in order for the true capacity to be recognised by Windows you need 2 things[otherwise it only recognises up to 137gb];1 - to be running Windows SP12 - to run the Maxtor Big Drive Tool[available from Maxtor support website]

1 more replies
Relevance 37.72%

Hey. I got a 250 gb western digital HD (WDC WD2500JB-00REA0) this started about a week ago, i keep hearing the drive stop like being cut from power and then powering up again,i had my computer on for a couple of weeks before this started could this anyhow affected it. I also tested it with SpeedFan S.M.A.R.T function and it gave me this warning - "NOTE : your hard disk Power On Hours Count attribute current value (96) is below the normal range (97 - 100) reported for your specific hard disk model. Basically your hard disk was powered on for more than the maximum time the average user did. This means that either all of the reports collected are from hard disks that were not powered on for too long (this is realistic for recent models) or that your hard disk is becoming old. Usually this is not considered as a pre-failure advisory, but you should check whether you want to replace the hardware or keep an eye on its performances over time."
Thanks.
 

More replies
Relevance 37.72%

Hey guys.
I setup my system on a 250gb hard drive but system reads it as a 127gb. I downloaded the software for converging it to its original form yet it won't let me as it is the C:// drive. If anyone can point me in a direction that might be able to assist, that would be awesome (i.e. a possible partition of the space that wasn't originally read?) THANK YOU!
 

Answer:Op sys is on 250gb, reads as 127gb

Do you have Windows XP Service Pack 2? That is the usual cause for this problem.
If you do not, you mayl not be able to partition the drive to anything larger than 132 GB... 127 or so after formatting the partition.
It becomes a catch 22. You could partition and format the hard drive to the 250 GB figure, if you had Windows XP Service Pack 2 to do the setup of the NTFS partition. It will work once as the full 250, or so, once it has Windows on it, but getting Windows on it prevents that.
There are solutions online you should be able to find with a Google search, but they require jumping through a few hoops.
One solution is to setup the hard drive as a slave in a computer that has Service Pack 2... or setup the drive with two partitions while slaved in another computer.
Alternately, set it up as 127 GB, then upgrade Windows with the Service Pack 2 disk you buy from Microsoft for $3.40, then use partition magic or Acronis to enlarge the partition.
 

12 more replies
Relevance 37.72%

Computer info:

HP Vectra
VL420 MT
WinXP Home SP2
LBA on
Intel Pentium 4 CPU 2.00 GHz
HP System board A08
Chipset: Intel i845 Rev: A3
Southbridge: Intel 82801BA (1CH2)
BIOS: American Megatrends, Inc.
Version: JA.01.07US
Graphic Interface Version: AGP version 2.0
Intel(R) 82801BA Bus Master IDE Controller
SD RAM 512 MB
PC133
NTFS
(did I miss anything?)

I appologize in advance for the long read.

This computer came with only a 10GB Seagate drive. It has less than 300MB left of unused memory, so I tried installing a 250GB Maxtor. It is only recognized as 30GB in the BIOS. I don't understand this because I have WinXP SP2 and LBA is enabled in the BIOS -
Not only that, but I have another 300GB Seagate that I want to install as a slave (I had previously installed this one as a slave to the 10GB but had the same problem with only 64GB being recognized.
I don't understand why my BIOS isn't recognizing it at it's full capacity since I have the latest version of BIOS and LBA is indeed enabled (I thought SP2 was supposed to correct this problem).

My hope is that someone out there can walk me through this step by step (from erasing the disk to installation) because I've been working on this thing all day long and nothing I've tried seems to work. The 10GB drive has to go. I want to install the 250GB drive as my master, copy the 10GB drive to it (I have Casper XP 3.0 for this purpose), and then install the 300GB drive ... Read more

Answer:250GB drive is seen only as 30GB

Did the Maxtor not come with a setup disc .....?
When you go to control panel / admin tools / computer management / disc management and right click on the "free" space of that drive what options do you get?
 

21 more replies
Relevance 37.72%

Hey this is my first post to this site so please feel free to nag more info out of me if i dont put enough onMy XP Pro recently got a 250 gb Seagate internal hard drive installed into it, yet it takes around 10 to 15 minutes for it to boot.So i decided in the end to have it as a secondary hard drive and have my 80 gb hard drive as a primary. yet when my 250 gb reaches over 91.9 gb full, it will not load anymore data, instead crash and say that i have lost all data that i was moving.If anyone knows whats wrong or even advice, it will be well appreciated.Thanks in advance.

Answer:Boot Problem XP PRO 250GB

How is the drive formatted ? ?NTFS/FAT32 ?2 things you can check: First in device manager find the IDE controller and then the drive andd right clik it and select Properties...Report back what mode it is in. If it's PIO mode this will account for the extreme slowness.2nd DLoad and run Seatools diagnostics on that drive to determine if it's healthy or not.The file is used to create a bootable floppy/CD so you can run it even if Windows won't run.Report back with your findings...

3 more replies
Relevance 37.72%

I am new to this forum and desperate to find a solution to my problem. My colleague told me of this service and here I am.I had a Windows98 PC with an external Maxtor 250GB firewire connected to it. I took the main HD out (the one with the w98) and installed new one and installed a newly purchased copy of XP. At this point I've connected my Maxtor without installing the driver thinking that XP would recognise it, but nothing happened. I installed the driver but nothing? it can be seen in the disk management as disk 1 and that's all; the next step would be a format, which I refuse to do it.I reinstalled my old drive (w98) back into the case, win98 started as normal, I connected the Maxtor and to my big surprise this drive is not being recognised anymore; even when the PC configuration is exactly what it used to be. I only can see the Maxtor through fdisk but not anymore as a 250GB FAT32, apparently now is a 40GB FAT !?!?!!.Please help me. I have far too much data on this drive including pictures going back 4 years and documents. This drive is a back up of my previous PCs. I cannot afford to lose this data.ThanksAndy

Answer:Cannot see Maxtor 250GB Firewire W98 pc --> XP pc

The data's probably there, just need to connect OK. I had trouble with my Maxtor OneTouch when I connected it without the Maxtor drivers installed, even on WinXP. Suggest you install Maxtor drivers properly before connecting. If that doesn't work take the drive to another WinXP comp, but install the drivers first!

10 more replies
Relevance 37.72%

I have a 250GB which seems to have failed entirely now. It's still detectable by Windows - is there any way I can recover the files? They're really important to me. I don't care what it cost to recover them, but of course cheaper the better
 

Answer:250GB Seagate HD failed

Contacy seagate. They should be able to help you.
 

11 more replies
Relevance 37.72%

Bought a new 250 g hd for my box. I want to install xp pro. I am at the stage where it shows 1 partition at 131 gb

Xp pro disk in cd bay, boot disk in floppy.

Any help would be appreciated
Dave
 

Answer:New 250gb hd 131 showing? Partition Help??

Plain-Jane XP by default will only recognize drives up to 132GB. If you create an SP2 slipstreamed CD using autostreamer, it will recognize the full drive upon install. Or, complete your install, update to SP2 and then use the "diskmgmt.msc" command in the "run" line to format the remaining hard drive as a second partition.

Autostreamer: http://www.majorgeeks.com/download.php?det=4444
 

12 more replies
Relevance 37.72%

Hey guys I'm new to these forums so be nice

I just partitioned my 250gb to 100 and 125 one i want to use for back up which i believe i will use my Acronis for.

The other i want to use as a regular hard drive, with windows XP or Vista,

But when i load the XP cd into the computer the XP disk does not see the USB 250gb drive at all (E: and F, how will i got about loading XP onto this drive?
 

Answer:I partioned my WD 250gb into two seperate ones, now what?

You are done.
Windows is installed on C: no?
The partitions on your removable USB drive can be used for more storage,backups.
 

5 more replies
Relevance 37.72%

I run win 98se with 2 drives, a 30gb and an 80gb, both work well, but are full. I bought a 250Gb drive to use as a USB external. To try and format the new drive, I replaced the 80 (D Drive) but the new one is only seen as a 65 GB drive. I've tried fdisk and format, Still 65Gb. Anybody any ideas? as always, thanks in advance for any helpCheers

Answer:250Gb drive and win98se

also, if I want to swop it between 2 machines, one win98se, the other XP, will it need to be fat32?

10 more replies
Relevance 37.72%

Just received and installed Maxtor 250GB HDD.I have a Maxtor 120GB as master drive, partitioned as C,D drive, all OK.Slave drive is the 250GB HDD. Been into Disk Manager and it shows as a 131GB partitioned drive.Been in Bios and it shows as 250GB. Where's the rest gone

Answer:XP will only recognise 250GB HDD as 131GB

click here

6 more replies
Relevance 37.72%

My 30gb harddrive in my computer died a few weeks ago and a scoured the stores for a new hd. I found a Maxtor 250gb hard drive on sale at Fry's for $140. It was a great deal for the space but I have some questions on it's performance. It's P-ATA 133 with an 8mb cache,a seek time of 9.3ms and rotates at 7,200 RPM. I do a lot of multiasking with Everquest and just general gaming so my pagefile is huge and constantly used. I also do some video editing.

My real question is how does it rate for my needs. Should I look at buy another smaller hard drive to use as my main or keep use this as my only hard drive?

I have the hard drive split into two partitions right now and am wondering which partion actually is on the outside of the platters so I can properly put the pagefile in it's place? Thanks in advance.
 

Answer:Some questions about a new 250gb harddrive

I have the drive. Its currently the only drive, and I use a separate partition for the pagefile, but don't see (and didn't expect) a performance improvement. I have a rig with the swapfile on separate drives and it was noticably faster. So I would definately recommend a keeping the old drive - wherever you put the OS, keep the swapfile on the other one.
 

2 more replies
Relevance 37.72%

Hello,

can someone help me - I have recently re-installed XP onto a 250GB hdd but it is only seeing 127gb drive. I have service pk1 and service pk2 installed and the bios on the system is seeing the 250gb drive.

Can someone help me

Thanks in advance

Elaine
 

Answer:Re-installed XP wont see 250gb hdd

6 more replies
Relevance 37.72%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 37.72%

Hi I have an Acer T135 -S870 and would like to install a 250 Gb SATA drive but it is not recognised in the Bios or through Linux Mint that is installed at present on my 80Gb drive in the T135-S870 Could you help me please in solving this problem.

Answer:250Gb drive not recognised

Have you tried to connect only the new hdd with the same cable of the old HDD?

2 more replies
Relevance 37.72%

I have a 250gb Maxtor Diamondmax10 SATA harddrive. In windows it only reads/writes up toe 233gb, it shows that thats its limit. In everest and every other diagnostic tool (hell even BIOS!) they all say that its 250GB. Any idea how I can get my other 17GB back??

Answer:250gb HD only gets 233gb on Windows!

Upgrading Service Pack might help.

Also goto disk managment and see if theres any unallocated space.

5 more replies
Relevance 37.72%

Hi,
Me again

Yesterday you solved my problem with my new 250Gb Hdd by pointing me in the direction of Diskmgmt.msc

I now have a second problem , I bought 2 of the drives , One for my XP machine which now works fine thanks , and the other identical hdd for my wifes Win 2000 setup and its on this machine I have the problem

Using diskmgmt it finds the drive no problem but allthough its a 250Gb drive its saying its only a 128

What should I do ?

Regards

Don
 

Answer:2nd Problem with Deskstar 250Gb Hdd

16 more replies
Relevance 37.72%

this summer i built myself a new computer. i was having sum trouble getting windows installed and thought it might be 1 of the HD's so i unhooked it. once i got it going i kind of forgot about the 250GB HD until just recently. i hooked it up and formatted it but it only showed up as a 127GB HD when it's supposed to be 250GB. this is very puzzling because on the post screen it clearly reads that it's a 250GB HD.

can someone please tell me what i hav to do to get it working correctly because i'd really like to move my music off of my dad's comp. btw, my system specs are in the sig

Answer:250GB HD showing up as 127GB!?

What kind of hard drive do you have? I don't see the sig on the screen so if its there i just can't see it. Also what operating system are you running??

9 more replies
Relevance 37.72%

Hi,
Bought a new Western Digital Sata HDD which I got today.
New in anti static bag and labelled WD2500AABS, says on it 250gb.
When I put it in my PC it shows as 40gb.
Thinking this may be an error I booted from Win XP CD to load OS and
it said 38.xx gb.
I have contacted the seller by Email but thought I may get faster and more reliable info from here.
I can of course return it but do not want to if it is me doing something wrong.
Ray

Answer:New 250gb Hdd Shows as 40gb

That model definitely shows as a 250GB see here
What version of XP? if you do not have SP3 you may not have support for large drives.
In Windows, click on Start->Run, enter "regedit".
Navigate to the HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\atapi\Parameters registry subkey.
From the Edit menu, select New, DWORD Value.
Enter the name EnableBigLba, then press Enter.
Double-click the new value, set it to 1, then click OK.
Close the registry editor.
Restart the machine for the change to take effect.

10 more replies
Relevance 37.72%

I've got 2 250GB HDD's, I know FAT32 won't work on, but I really don't want to use NTFS. I run Windows and Linux, so having 500GB of HDD space that Linux finds hard to handle isn't really my best option.

Is there another file system or way around it that I can run on Linux and Windows without to much trouble?
 

Answer:FAT32 and 250GB HDDs

10 more replies
Relevance 37.72%

ive had the hdd for about a year now and its been working fine, i only used approx 1/3 of the capacity. But the other day my m8 was installing Windows 7 on his laptop, so he filled my hdd up with all his backup, and their wasnt any more space left, the next day i plugged it in & the white light was flashing, but i could not go inside it, it just appears as a "Local Disk (F)" on My computer, and the same on my m8's, (and if u double click it, then a sign appears stating that (F) is nt accesible because of an I/O error). oh and i recently changed it from FAT to RAW cuz it wouldnt allow me to move more than 2gb at a time, dnt knw if that mite be important, any thoughts cuz i reeli need the data....?
 

More replies
Relevance 37.72%

Hi,

I was wondering if LANParty UT NF3 250Gb Motherboard is good for gaming or other usage. How reliable is this motherboard ?

Thank you
 

Answer:LANParty UT NF3 250Gb MoBo

http://www.anandtech.com/mb/showdoc.aspx?i=2198
 

1 more replies
Relevance 37.72%

I have looked all over the internet and cannot find it.

looks like DFI took all the support pages down as well! Any help would be greatly appreciated!!!!
 

Answer:Need manual for LANParty UT NF3 250GB

Found it yet?

Hey there,

Just wondering if you found the manual yet?
I am looking everywhere to try and find one but no luck yet...

Cheers
 

9 more replies
Relevance 37.72%

Hi guysI have recently purchased a crucial 250gb ssd and i want to clone my Lenovo y510p 1Tb HDD. The HDD has 7 partitions. A 1000mb recovery partition, a 350mb recovery partition and another 13.2Gb recovery partition, a 260mb EFI system partition, 100mb oem partition, Windows 8 OS partition , and a Lenovo(D) partition. I'd like to only clone the OS but to do so which partitions are needed to boot into Windows and do I need all the partitions(I really don't want all 3 recovery partitions) and why are there 3 recovery partitions?Thanks
 
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity

More replies