Computer Support Forum

Fatal Error NT 4.0

Question: Fatal Error NT 4.0

OK

Be working on fixing this NT 4.0 for the last two days.

I'm now trying to install the os over the old one since repair did not fix the problems

But I am getting the following message with the orig CD of the OS system (security subsystem could not be initialized.)

Before this I tried resetting the login password and still was unable to log in with the proper password

Any idea how or what I need to do to get pass the security message

Thanks

Mike

Relevance 100%
Preferred Solution: Fatal Error NT 4.0

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Fatal Error NT 4.0

14 more replies
Relevance 60.27%

Unable to remote to machine at work since upgrading to Windows10.

A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 10.

More replies
Relevance 46.74%

Hi,I have fundamentally the same problem as Laura H from this thread http://www.bleepingcomputer.com/forums/topic342716.html.I've had problems with these fake antivirus programs before and they really did a number on my laptop. I treated the problem using various tools mostly malware bytes and deleting some suspect files.Been working fine for the most part however today out out of nowhere I was attacked by malware doctor. I deleted the suspect file from the temporary internet files folder and ran malware bytes that detected trojan and deleted. Shortly after drwatson ??? was shut down and some time later I think explorer shut down because my desktop went back to basics....no theme,desktop wallpaper etc. the windows 95 look if you grasp what I'm trying to get at. I thought it was no big issue and in my own time restarted laptop when I realized audio wasn't working after trying to play a film.Upon restart I get the blue screen with the same message as Lauras. So for the most part I'm in the same situation as Laura with some minor differences such as I didn't use Spy doctor etc.I have Kaspersky AV installed which has been inefficient in protecting my laptop lately, especially from these fake AV attacks. I am using Windows Firewall which I know is a bad idea.Myrti was helping Laura resolve the issue and I have followed her instructions upto the following actions:'locate this file and right click it > choose rename > rename it to userinit.txtnow we wi... Read more

Answer:Malware doctor infection removal and then error c000021a (fatal system error)

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

6 more replies
Relevance 46.74%

Hi all, I'm receiving an error message " fatal error: one or more table pointers are invalid. Modifications could be unsafe - press any key to continue"

I've just put together my new build, and have never came across this. Googling hasn't solved anything. All help is much appreciated Computer does seem to run okay when started.

Specs:
Gigabyte G1 Sniper B5 mobo
Intel i5 4430 CPU
Gigabyte gtx650ti OC 1gb
8GB Mushkins blackline ram
1TB Seagate HDD.
- can be more detailed on request.

Regards,

Answer:[SOLVED] following error on new build.&quot;fatal error: one or more table pointers are in

* Boot up the PC from your Windows installation disk * Press and hold SHIFT and then press F10 * Input "bootsect.exe /nt60 SYS /force" (without quotes) Restart the PC Note: If the above doesn't fix your boot issue then use the command "bootsect.exe /nt60 ALL /force" instead.

5 more replies
Relevance 46.74%

I get the following error when starting my laptop.

"Stop: c00021a {fatal system error} The windows logon process system process terminated unexpectedly with a status of 0x00000080 (0x00000000 0x00000000)
The system has been shut down"

I have recovery CD provided to at the time of purchase. I have some data which I need to recover. If anyone knows resolution to this problem , please let me know the procedure.

Thanking you in advance.
-YG

Answer:Error c000021a : {fatal system error} while booting laptop M30 series

Hello

I have found one interesting page. Please check all solutions mentioned on this page. http://www.eggheadcafe.com/ng/microsoft.public.windowsxp.accessibility/post652591.asp

Good luck!

3 more replies
Relevance 46.74%

Hi, I have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem. Any suggestions on what is happening?
 

Answer:STOP: c000021a (Fatal System Error)" Error Occurs

8 more replies
Relevance 46.74%

Running Windows 10 pro 1511 build 10586.494 AMD FX 6 core processor.
My event log (System) show this message about 10 times every half hour. The system does not crash and there are no onscreen messages, however, one drive has never worked on this computer (cannot log in) and I suspect this error has something to do with it.
I cannot find any information on this specific error. There are some references to ssl with a 10013 error but nothing I can find for TLS.
Can someone direct me to a solution.
Thank you

More replies
Relevance 46.74%

  I hope someone can help... I have an LG laptop computer, its a vista, I am unable to access well anything,  when I turn on the computer it seems it will work normally, then it goes to a screen that recommends to start " Launch start up repair ( reccomended) so I click on it...the screen goes black and stays that way for a while nearly 15 min, then a blue screen appears with: STOP: C000021a {Fatal system error}The verification of a knownDLL failed. system process terminated unexpectedly with a status of 0xc0000221 (0x8d5c768 0x00000000) The system has been shut down.thats as far as it goes, I can not get antfurther..I really need help, all my work is on that computer...please please help!!!! PUZZERWOP

Answer:Windows error recovery/ blue screen fatal system error c0000021a at startup...

Just posting for latter if i can find it.  sorry that I cant help right off but I dont have the code book with me.

1 more replies
Relevance 46.74%

I Own HP ENVY 4-1046tx UltrabookLast time i forced shutdown the laptop (because it got hanged!)and after that i got this errorsafe mode is not workand last know good configration disnt have any effect.sugguest a way out of this....!!!!!











Solved!
View Solution.

Answer:Blue screen error - c000021a Fatal system error

Solved.... Solved.... n solvedby some mean (confidencial way) i have installed window in it...!Thnxx for help and suggestion.

10 more replies
Relevance 46.74%

Im installing windows xp home edition on emachines W3118 , I have two internal hard drives and one is old and one is new. Old one is 80 GB and I formatted it and the new one is 160 GB and they are both Western Digital hard drives. The 160 GB I was just going to use as extra storage. I also have a dvd writer that is new, it is made by lite on, model is LH-20A1P33C, I did have a cd rw/dvd rom drive but I took it out because it couldn't be read. I don't have to have it right since I have the dvd writer now-Is that correct?I have 1 GB memory on my system. I have one partition on the 80 GB drive and it is C:  During windows xp home with sp2 installation I get this error: Source: System Setup Log - (C:\WINDOWS\setuperr.log)Error:SXS.DLL: Syntax error in manifest or policy file "D:\i386\asms\10\MSFT\WINDOWS\GDIPLUS.MAN" on line 4.***Error:Installation failed D:\I386\asms. Error Message: Data error (cyclic redundancy check).***Fatal Error:One of the components that Windows needs to continue setup could not be installed.Data error (cyclic redundancy check).If you are installing from a CD, there might be a problem with the disc; try cleaning the disc or using another disc.If you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. Run the disk checking utility on your installation drive from the Recovery Console and start setup again.***

Answer:Fatal Error- Data error (cyclic redundancy check)

Have you tried doing what error message suggests?Quote from: Janniiie on March 28, 2008, 11:31:39 AMIf you are installing from a CD, there might be a problem with the disc; try cleaning the disc or using another disc.

3 more replies
Relevance 46.74%

how can i correct to enable installation of antivirus

Answer:error 1603 Fatal error during installation of antivirus at 99 % instal

Which anti-virus are you trying to install?

After doing some research of the error code, i stumbled upon this: https://support.microsoft.com/kb/834484?wa=wsignin1.0

Give this a shot, to see if this will help!

-Justin

2 more replies
Relevance 46.74%

Hey, I have Windows 7 running on my HP Pavilion g6 Laptop: Notebook Model: HP Pavilion g6 Notebook pCProduct Number: QE058UA#ABASerial Number: 5CG1390N72  Yesterday I clicked accidentally on the  Windows 10 popup dialog which appeared below right in the corner   . The system run 20 minutes and did some cofiguration,  as a result I am getting this error in the advanced boot options. coooo21a {fatal eystem error}. The initial session process or system procress terminated unexpectedly with status of0x0000001 0x000107c8. The system has been shut down I have tried several options to solve the problem: 1.Lunch startup Repair (recommended) ---> Problem signuture:Problem Event Name:         StartRepairOfflinePromlem Signature 01:      6.1.7600.16385Promlem Signature 02:      6.1.7600.16385Promlem Signature 03:      unknownPromlem Signature 04:      -1Promlem Signature 05:      AutoFailoverPromlem Signature 06:     18Promlem Signature 07:     BadPatchOS version:                             6.1.7600.2.0.0.256.1Locale ID:             &nb... Read more

More replies
Relevance 46.74%

Recently uninstalled Acronis True Image 10 software due to program failure to restore.Now on computer startup before Windows even attempts to load, I get this message across the top of the black screen, "Acronis Loader fatal error:  Boot Drive Partition not found. Press "enter" to try to load your OS."After pressing 'enter,' system boots up and runs with no problems.Anyone know where this message is originating from and how to get rid of it?thanks,Phil

Answer:Acronis Loader fatal error . . .bootup error message

Sounds like something in your Boot.ini file.Have you look at it to see if it still has Acronis boot info?What OS are you running?

14 more replies
Relevance 46.74%

How to fix ???
Main: ASUS P5KPL-AM
Error:

Chassis intruded
Error... System Halted

Help me, How to fix it ?
 

Answer:[Error] Chassis intruded...Fatal error System halted

Try things that they mention here (Google...): http://vip.asus.com/forum/view.aspx?id=20081024173658250&board_id=1&model=P5K-E%2FWiFi-AP&page=1&SLanguage=en-us
 

6 more replies
Relevance 46.33%

I'm having a problem with my sister in law's computer. Originally, she had that annoying XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message;

STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)

I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage since I'm not trained for this. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one. I have no windows CD. The computer is a Dell, and it's running Windows XP service pack 2 with Explorer 6. Heeeeeelp! Other than the F keys, I can't get anywhere with this computer.
 

Answer:Error Message blue screen of death C000021a Fatal System Error Windows Logon Process

9 more replies
Relevance 46.33%

I have no idea what is wrong with my computer its specs are
Gigabyte Z77X-UP5 Motherboard
Intel I5-3570K 3.4GHz Processor
1TB Western Digital HDD
Sapphire 7970 Graphics Card
I believe it has something to do with the Standard SATA AHCI Controller because it says its corrupt/damaged but when I try to update the driver it says it has the latest update, the computer goes to a blue screen freezes saying your computer ran into a problem and needs to restart please help
 

More replies
Relevance 46.33%

Hello, my friend has had the above error come up on his laptop when he starts it up then the old blue screen. Luckily he then chose the 'Last known configuration, and it is ok. What id like to know is what IS this error please? A virus maybe? How can he stop this happening again?

Answer:c00002la fatal system error-Virus or Reg error?

A little more detail of the error is really needed. Take your pick. click here

10 more replies
Relevance 46.33%

I have been battling a virus(es) on my desktop for the past couple weeks. Yesterday, I downloaded and ran Spybot in safe mode. It listed 7 problems and I chose "fix selected". Spybot fixed 5 of the 7 and then prompted me to reboot to fix the other 2. Admittedly, I was brain-faded so I didn't look closely at what file names or paths it was trying to fix. Since that particular reboot, I have not been able to load windows since; fyi, I am running XP Pro. When I powerup, the computer flashes the Windows XP logo and then ultimately gives me the following message (before prompting me for login info): Fatal System Error c00021a. windows logon process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000). The system has been shut down.

At this point, I'm not sure if I have a virus problem that has escalated, causing this fatal error, or a completely different problem. I'll give a bit of a background, since it may be relevent. I run Malware Antibyte scans and Advanced System Care (ASC) scans weekly to clean up any issues, but lately the problems would reappear just hours after running the scan. So, a couple of days ago, I downloaded Avast 5 and completed a scan. I also downloaded a freeware called Teamviewer at that time, although i don't think that is part of the problem, despite the timing. Yesterday morning, when booting up the computer in normal mode, I was unable to see any desktop icons or taskbar, I only could see... Read more

Answer:Virus cause Fatal System Error c00021a error?

Sit tight: An experienced member of the Malware Response Team will be along to assist you.

6 more replies
Relevance 46.33%

Hi everyone,
This morning I turned on my PC (Windows 7 x64) and I get this blue screen error STOP:c000021a [FATAL SYSTEM ERROR].
I can't even get passed the starting windows screen it just keeps on rebooting then getting blue screen again. I've tried safe mode and last known configuration point. Both just give me blue screen after the drivers are loaded. Haven't installed anything new recently so I don't know what the cause of this problem could be. I apparently have no system restore points even though Norton would make them every scan. I can get to command prompt and that is the only thing I can get to. Is there a way I can fix this through command prompt. I think I've attached the screen it gives me and that's all I know.
Thanks!
 

Answer:Error code c000021a [FATAL SYSTEM ERROR]

6 more replies
Relevance 46.33%

Hello Experts,

I have new laptop with windows 8
I installed one program that I need to work and I am getting the error: fatal error 171 while attempting to report error 171 

Troubleshooting done:
1- Reboot the laptop
2- Uninstall and install 2 times 
3- Tried to run the program in compatibility mode with older windows, even other laptop with windows 8 is working just fine
4- Tried to install MVF runtime, it didnt continue the installation but no error message appeared
5- Tried to check for windows updates, up to the latest ones
6- Tried to update MVF, but I got error messages that it cannot be installed  

Many thanks in advanced 

More replies
Relevance 46.33%

When it happens it says 'Fatal error (0xC0000005) at 0x7761E41B'
It makes a minidump file which I have attached, please read it and tell me what I have to do to stop this error and let me play my game

REDACTED ZM - 29.01.2015 19-01-16.zip

Answer:Error when trying to play Black Ops 2, Fatal error 0xC0000005

Hey Sam, while you wait for dump analysis, run a full Scan with Malwarebytes
if necessary in Safe Mode.

Then run SFC /SCANNOW Command and establish a clean boot from the Troubleshooting Steps for Windows 7

8 more replies
Relevance 46.33%

I downloaded and tried to install Xcelcius and after a short time I get the message Fatal Error - Installation ended prematurely because of an error
When I press OK the installation closes
I use vista home basic
I tried to install using xp compatability and the same thing happens
I also downloaded the program a second time and it still happened
 

Answer:Fatal Error - Installation ended prematurely because of an error

Look at the Event log.
 

3 more replies
Relevance 46.33%

Hi Guys,
My win7 X64 laptop keeps freezing up. In Event Viewer I got the following message.

'The following fatal error alert was generated: 10. The internal error state is 10. schannel.

This error doesn't give me much to work on. Any help on this is much appreciated.

Many thanks
AIRobot

Answer:The following fatal error alert was generated: 10. The internal error

Hello AIRobot & Welcome to SevenForums!

Does these freezes appear when doing something specific on your machine?
Have you updated your drivers lately?

Try going to cmd (press start-orb and search 'cmd') and type this message and notice any outdated drivers:


Code:
driverquery
Best Regards,
FredeGail

1 more replies
Relevance 46.33%

I think rebooting could maybe make things worse, so I figured it would be better to ask for advice before attempting to reboot again, so I don't have the scanning information required.

I began to have problems with my computer this morning (June 29). Last night I had let windows install its updates, rebooted, and left the computer on overnight. When I got up the next morning, it had an error about win32.exe encountering an error and needing to close, one of those error report ones. The first time I didn't bother telling it to send. However, afterwards the taskbar disappeared and ctrl+alt+del didn't do anything. I had to reboot manually, and then it was fine for a while until having another win32 error report, which I sent, and after which my sound failed to work for certain things. My winamp had an error about missing something and wouldn't play, and a youtube video's sound wouldn't play. I didn't have to shut it down manually this time, and the shutdown sound worked. The sound worked again afterward, but I tried virus scanning with Avira and it stopped on svchost.exe.mdmp at 22.1%, and it only found a java/openconnect.l for a ?detection?. I tried getting the task manager, and when I tried ctrl+alt+del and clicked it, it not only didn't give me the task manager at all but it took my taskbar, and then nothing else would work when clicked. I rebooted again and tried running MalwareBytes, and then after a couple minutes the screen went black and then turned blue, and had this:... Read more

Answer:Win32.exe error report, fatal system error later

Bump, please.
I also forgot to mention that after I rebooted the 2nd time, Google Chrome appeared on my computer, but I never installed it. So there's something weird going on there too.

19 more replies
Relevance 46.33%

I put Windows 7 on an old AMD computer. Asus A8V Deluxe MB w/4400 X2, 2 GB memory and ATI X800 Video Card. It installed great and runs pretty good. Thought I would ck the error log and found a few errors I was wondering about.

Error 18 comes up twice in the error log, sometimes three times

Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 2/6/2013 4:20:16 PM
Event ID: 18
Task Category: None
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: Asus-WIN7
Description:
A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Unknown Error
Processor ID: 1

The details view of this entry contains further information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}" />
<EventID>18</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-02-06T21:20:16.140625000Z" />
<EventRecordID>13974</EventRecordID>
<Correlation ActivityID="{6EF4F233-17D4-4302-BEBB-391D1EA8592C}" />
<Execution ProcessID="1372" ThreadID=... Read more

Answer:Fatal Hardware Error 18 and Processor Performance Error 6

Anyone?

1 more replies
Relevance 46.33%

Hi, My R51 thinkpad when booting up gives the error msg  STOP" c000021a ( Fatal System Error )The windows logon process system process terminated unexpectedly with a status of 0x00000080 ( 0x00000000 ox00000000 ).The ystem has been shut down. This msg appears on a blue screen. I have tried booting in safe mode, using last known good config and had no luck. Any help provided here  would be greatly appreciated.       

Answer:R51 gives Error Msg " STOP: c000021a ( Fatal System Error )"

I experienced the same problem at Christmas. After much gnashing of teeth, I rescued the settings and documents folder to an HP external USB drive using the Thinkvantage utility. After verifying I had the copy, using another computer, I reinitialized the notebook hard drive to the factory state. (It was an interesting process to watch and took an afternoon to complete.) I reinstalled the applications. Happily, I don't have that many. Note that this folder is hidden like a system file so you have to set folder options to show it. My machine is 4 years old and has never given me any trouble until now. I am more vigilant with backups and especially trial software off the net. For the time being, I am keeping my personal files on a separate disk. I don't know if the error is a sympton of a fialing hard drive or just crummy software. research on the internet suggests a variety of causes. It's a wonder XP works at all, given everything that can go wrong. On the happy side of things, my computer is lot speedier!

1 more replies
Relevance 45.51%

After solving "ntldr is missing" problem,I boot the computer.THen computer ask me to choose the operating system to start.Its screen displays following message:

select the operating system to start:
Microsoft Windows XP Professional
Microsoft Windows
Use the up and down arrow keys to move the highlight to your choice

If I choose Microsoft Windows XP Professional,error mesages will appear as below:
STOP :c000021a{Fatal System Error}
The Session Manager Initialization System process terminated
unexpectedwith a status of 0xc0000034(0x00000000 0x00000000)
The system has been shut down.

But if I choose Microsoft Windows,there will be message stating "Microsoft Windows I\O Error accessing boot sector file multi(0)rdisk(0)partition(1)\BBTSECT.DOS".

What should I do to solve this fatal system problem? Does fixing "ntldr is missing" problem cause this fatal system error?
Thanks in advance
 

Answer:Error message:Fatal System Error

sub-forum: guides & solved issues

The above forum has information on how to use Recovery Console & Windows XP CD to restore the OS. Caution, I recommend full backup to a 2nd disk. Caution, don't enter 'r' to the first decision point. Caution: next decision made should not reformat the partition. If you have the ability to clone the hard drive, then you have a spare should recovery be re-done.

Other posts recommend configuring computer to a minimum: the boot hard drive, cdrom, and 1 memory module (256MB is the minimum for XP). This is an easier first step before reloading anything.

Caution: oem restore bombs you back to out-of-the-box conditions. All data & applications are overwritten. This is different from above restore.

You did not indicate what significant changes occurred preceding the problem. Is the hard drive entering old age? Was the disk re-partitioned? Were applications closing/freezing in the days leading up to this?
 

1 more replies
Relevance 45.51%

Looking for help with this. Initial research suggested making a change in the registry to solve this but I'm not that good to attempt that without support.

Full text:

Fatal Error!
Error loading EXE C: . . . \Fish Tycoon\Fish Tycoon.exe Error 2

Would also like to provide a "Hijack This" log to see what other gremlins are nesting on the drive. Seems to be running slow even with a recent RAM upgrade.

Thanks!

Answer:Fatal Error! Fish Tycoon.exe Error 2

This is not the forum for HJT logsFish Tycoon is an online gameWe can run a few scans here to see if you need to post a HJT log---------------------Please download Malwarebytes Anti-Malware and save it to your desktop.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue wit... Read more

7 more replies
Relevance 45.51%

After some mild gaming on my HP Z420, it started rebooting on it self and at the boot screen i can now see929 FATAL MCA ARRORMLC ERROR detected CPU 0Any idea if the board is starting to act up or is the CPU, or something else?( bios 3.65, Runing windows 7, 32Gb of ram, 2TB HD and 670 GPU)

Answer:HP Z420 - 929 Fatal error - Mlc error detected cpu 0

no one seen this error before?

3 more replies
Relevance 44.69%

Gday Guys, I need to know how to fix this FATAL ERROR I keep getting when i Open Windows Media Player and Nero Applications. Ive tried reinstalling WMP but once i reininstalled Says same dam thing. Making me Frustrated

Any Help Or Ideas would be very helpful

PS Has Anyone Seen or had the same problem ?

Answer:How Do I Get Rid or Fix FATAL ERROR

Hi Josh,

When did this error start occuring? Did you install any software that caused it to start occuring?

3 more replies
Relevance 44.69%
Question: Fatal error:

Just went to:
http://www.xbitlabs.com/

and got this error message while trying to access their site:

Fatal error:
MySQL: Can't create a new thread (errno 35). If you are not out of available memory, you can consult the manual for a possible OS-dependent bug

Imagine everyone is receiving the same message until they get wind of it and fix it. Guess someone has hacked their site.
 

Answer:Fatal error:

Site works fine for me (?)

And what's this have to do with anything?
 

2 more replies
Relevance 44.69%
Question: Fatal error in IE

I got a blue screen background saying FATAL ERROR IN IE...My display options are Screensaver and settings. Thats it. I ran Hijack this and followed to tutorial. It said to post your results here. I got,Logfile of HijackThis v1.99.1Scan saved at 14:31:04, on 5/7/2005Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\ASWLSVC.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exeC:\WINDOWS\system32\ASWL2K.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\WINDOWS\System32\CTSvcCDA.EXEC:\WINDOWS\system32\msole32.exeC:\Program Files\Norton AntiVirus\navapsvc.exeC:\WINDOWS\popuper.exeC:\WINDOWS\system32\intmonp.exeC:\Program Files\Messenger Plus! 3\MsgPlus.exeC:\PROGRA~1\mcafee.com\agent\mcagent.exeC:\Program Files\Norton AntiVirus\AdvTools\NPROTECT.EXED:\Program Files\BillP Studios\Win... Read more

Answer:Fatal error in IE

Hello Phili G and welcome to the BC forums. After reviewing your log I see a few items that require our attention. Please print these directions and then proceed with the following steps in order.Step #1I recommend that you remove MessengerPlus because it has advertizing and spyware included in its installation, and MyWebSearch because it is a search hijacker that is usually installed without your knowledge or permission.Remove installed programs using Add or Remove Programs in the Control Panel:Click Start.Click Control Panel.Double-click Add or Remove Programs.Look in the Currently installed programs box for each program listed below and if it is there:Click on it to select it.Click Change (or Change/Remove) button.If you are prompted to confirm the removal of the program, click Yes.MessengerPlus (or anything similar)MySebSearch (or anything similar)Download CCleaner and install it but do not run it yet.Step #2Start in Safe Mode Using the F8 method:Restart the computer.As soon as the BIOS is loaded begin tapping the F8 key until the boot menu appears.Use the arrow keys to select the Safe Mode menu item.Press the Enter key.Step #3Start HijackThis and click the Scan button to perform a scan. Look for the following items and click in the checkbox in front of each item to select it:R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.qfind.net/R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Search_... Read more

1 more replies
Relevance 44.69%
Question: fatal error

hi all.i am trying o put on put on windows 2000,i have don the bootup part and then it gets to the it setup part where it restarts and then it coms up with:

fatal error

An error has been encounted that prevent setup from continuing.

setup failed to Install the product catalogs.This is a fatal error.The setup log filles should contain more information

press ok to view the setup log fill.

can any one help???

thanks.
 

More replies
Relevance 44.69%
Question: fatal error

Hey tech guy!

You helped us once before and we are hoping you can help us again. we have a dell computer and are using windows xp and recently when we signed on, our desk top disappeared and was replaced by a generic warning screen saying that our computer's security was at risk. it offered a link to scan our computer but we ignored that - fearing it would futher infect us and scanned our system using super antispyware. the first time it "removed" 139 threats and we have since ran the scan three or four more times. as of this morning we are still completely unable to navigate our computer. it is currently off line and i am using a lap top to contact you.

Although the trojan.fake drop threats have been temporaily removed we are getting BatCO and Adware/80 solutions surf assistant.

what - if anything can be done to clean our computer up!?!?!

Thanks!
cm
 

Answer:fatal error

6 more replies
Relevance 44.69%
Question: Fatal Error

I have a Compaq SR1250nx with an ATA hard drive. We tried to restart the computer and get the following error......tried in Standard and Safe Mode.

Fatal Error .... Windows is unable to start because the registry could not be updated....

I have a boot disc that I created with Bart PE.....I can access the C drive...but i am not sure want to do next...

I tried system restore but get same error message.................HATE it when windows does not load....may go to Linux, but kids would kill me.

HELP

Answer:Fatal Error

Have you run a CHKDSK /f from the command line to see if there is any damage to the hard drive?Running CHKDSK from BartPE.

9 more replies
Relevance 44.69%
Question: fatal error

having problems running spysweeper, gets so far then comes out of windows with message "fatal error exception oe has occurred at 0028:d41f6a9c" I have run anti virus which is clear.

Answer:fatal error

Unistall and reinstall spysweeper.

1 more replies
Relevance 44.69%
Question: Fatal error

Hi,

Before reaching the log-in page, I receive an error titled "winlogon.exe - Application Error" with the following message:

The instruction at "0x75978dc1" referenced memory at "0x00000000". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program

I have clicked on OK, CANCEL and the "x" in the top right hand corner of the message then I receive a FATAL ERROR on a blue screen stating the following:

"STOP: c000021a (Fatal System Error)
The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000).
The system has been shut down.

Then there is no way out of the screen except to hold down the on/off button for the laptop itself and re-start all over again.

PLEASE HELP!

Thanks,
Lauren
 

Answer:Fatal error

Hi have you made any Hardware - Software changes prior to this happening?
Try..
Reboot - tap F8 as Pc starts up.
Choose.
Safe mode with command prompt..
Log on as administrator.
Type.
%systemroot%\system32\restore\rstrui.exe

This should launch System Restore.
Choose a date prior to the problem.

How to troubleshoot a "STOP 0xC000021A" error
http://support.microsoft.com/kb/156669/en-us
 

1 more replies
Relevance 44.69%
Question: win xp fatal error

Hello, I am trying to load win xp into an azus eee from a flash drive that I made from wintoflash and when the windows splash screen comes up it acts like it is gonna work but I get an error message that says Fatal error an error has been encountered that prevents setup from continuing. Assembly protection error. I desperately need to get xp back in this Azus!!! Please help!!!
 

Answer:win xp fatal error

"Assembly protection error" - usually means there is something missing on the installation media or you've made some errors in creating it.
 

1 more replies
Relevance 44.69%
Question: php fatal error

I get the following error everytime i run a cron job runnung a php script. Do i need more php.ini memory or is the script incorrect.

PHP Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 40 bytes)

Does anyone know a host that offer high user memory?

Regards

Mark
 

Answer:php fatal error

You can change memory_limit in php.ini
16MB is a lot of memory for a php script, what exactly is the cron job supposed to be doing?
 

2 more replies
Relevance 44.69%
Question: Fatal Error

My macbook pro started freezing last week, it now only runs for 3 mins before it freezes and i have to hold the power key down to turn it off. i ran the disk utility check and it came back with...

The drive has reported a fatal hardware error to disk utility. back up all data and replace with a working drive.

does this mean i just need to change my hard drive? also if i replace my hard drive can i then copy data from it once my computer is working again? thanks.
 

Answer:Fatal Error

does this mean i just need to change my hard drive?Click to expand...

Yes
if i replace my hard drive can i then copy data from it once my computer is working again?Click to expand...

That depends entirely on the extent and type of failure.

I advise you turn off the computer immediately and leave it off until you can remove and replace the drive. Reconnect it as a secondary drive only when you are ready to recover the data. Every minute you run that defective drive brings you a minute closer to complete failure when recovery will involve sending it away to a specialist where it will cost you in the $hundreds$ if not $thousands$ to recover your data.
 

3 more replies
Relevance 44.69%
Question: Fatal Error...

Another problem...

So after this episode, I got it fixed. So then I started setting it up with various software such as Visual Studio 2010 Ultimate, Expression Studio 3 (It's all legal; - I got it from Dreamspark) and when I try to run Visual Studio 2010, I get a BSOD saying something along the lines of:

Fatal Error c000021a
[Something about referencing to memory] 0xc0000005 (0x75e9ad23 0x00f9f240)

Please help... I know it's probably not malware... but I still want to program like I used to.
 

Answer:Fatal Error...

try running a memory tester overnight: http://www.memtest.org/
 

1 more replies
Relevance 44.69%

I have the message above, I'm not an expert of the computer...somebody could help me, I'm running windows XP not in the normal way.I did a scan with hijackthis...the result isLogfile of HijackThis v1.99.1Scan saved at 18.51.43, on 09/07/2005Platform: Windows XP (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 (6.00.2600.0000)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Programmi\File comuni\Symantec Shared\ccSetMgr.exeC:\Programmi\File comuni\Symantec Shared\ccEvtMgr.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\Programmi\Norton AntiVirus\navapsvc.exeC:\WINDOWS\System32\svchost.exeC:\Programmi\File comuni\Symantec Shared\ccApp.exeC:\WINDOWS\System32\ctfmon.exeC:\Programmi\Messenger\msmsgs.exeC:\Programmi\Hewlett-Packard\Digital Imaging\bin\hpohmr08.exeC:\Programmi\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exeC:\Programmi\Hewlett-Packard\Digital Imaging\bin\hpoevm08.exeC:\Programmi\Norton AntiVirus\SAVScan.exeC:\Programmi\Hewlett-Packard\Digital Imaging\Bin\hpoS... Read more

Answer:fatal error ...help!

You may want to print out or make a copy of these instructions before starting, because you will not be able to connect to the internet during most of this fix.*Please download smitRem.exe and save the file to your desktop.Double click on the file to extract it to it's own folder on the desktop.*Please download ewido security suite it is a trial version of the program.Install ewido security suiteWhen installing, under "Additional Options" uncheck "Install background guard" and "Install scan via context menu".Launch ewido, there should be an icon on your desktop double-click it.The program will now go to the main screenYou will need to update ewido to the latest definition files.On the left hand side of the main screen click updateThen click on Start UpdateThe update will start and a progress bar will show the updates being installed.If you are having problems with the updater, you can use this link to manually update ewido.http://www.ewido.net/en/download/updates/[*]Exit Ewido. DO NOT run a scan yet.[/list]*If you do not already have Ad-Aware SE 1.06 installed, follow these download and setup instructions. Also check for updates:Ad-Aware SE SetupAgain, do NOT run a scan yet.Next, please reboot your computer in Safe Mode by doing the following:Restart your computerAfter hearing your computer beep once during startup, but before the Windows icon appears, press F8.Instead of Windows loading as normal, a menu should appearSelect the first option, t... Read more

2 more replies
Relevance 44.69%
Question: Fatal Error

I usually use TechBytes for help with computer problems. But lately when I try to create a post I get this

Fatal error: Can't use function return value in write context in /home/pctechby/public_html/forums/system/Text/HtmlPurifierInternalLinkDef.php on line 70

Why am I getting it, and what can I do about it? Thanks in advance for any help givin.
 

More replies
Relevance 44.69%
Question: Fatal Error!?

I have a Dell E1505. I ran several virus scans today, and removed unwanted programs. AFter i restarted, this message popped up. I can no longer even get on my computer. i tried running in safe mode. Please help. This is what it says,

STOP: c000021a [Fatal System Error}
The windows logon process system process terminated unexpectedly with a status of 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.


Any suggestions on what to do?

Answer:Fatal Error!?

Do you have a system disk?
http://support.microsoft.com/?kbid=318159

2 more replies
Relevance 44.69%
Question: Fatal Error

When trying to reinstall Win XP Home edition on a second computer(Pent 4, 512 ram) I continue to get a 'Fatal Error' window with the message:"Setup failed to install product catalogs.  This is a fatal error. The setup log files shouldcontain more information.  Press OK to view setup log file."I've tried to boot in safe mode but it won't allow this.  I've also tried to get to thecommmand prompt but unable.  The PC is stuck in this setup mode and won't boot upnow.  I'm ultimately trying reformat the C drive.Not sure if this is relevent but I used my copy of XP Home to do a clean install, together with the other PC's product key number. Thanks!

Answer:Fatal Error

Maybe here:http://support.microsoft.com/kb/823303

6 more replies
Relevance 44.69%
Relevance 44.69%
Question: Fatal Error!

Just recently i have seen the blue screen of death. I dont really know how to explain how it happens, ill be running firefox and for instance open up MSN messenger, then the blue screen will come up and my computer will restart automatically. If there is some way i can get the error log file maybe u guys can help me more.
thx.

Answer:Fatal Error!

Look the Event Viewer which is located in the Administrative Tools.Administrative Tools are located in the Control Panel. Start with posting only the Error messages generated in the last day or so. If this has been occurring for a while it will generate the same message since it started.

3 more replies
Relevance 44.69%
Question: wtf? fatal error

ok when i try to uninstall easy cd creator 5 platnum from add/remove programs, after clicking yes i get a box that says this:
Fatal error during installation.
for some reason there is no installation folder, but i can still use the program. is there any way to uninstall it short of reformating?

(I should mention that it is not a legal copy, i got it for "free") could that be the problem?

Answer:wtf? fatal error

This happened to me before. The reason you probably can't uninstall, is because the installer didn't include an uninstall log file. I would reccomend you Install it again to see if it will come out. If not, Try uninstalling in safe mode.

7 more replies
Relevance 44.69%

I I have a hp 110 mini but it keeps saying system fatal error and asking me for a password I don't know. The error code is cnu0075hrz

Answer:Fatal error hp 110.!

Hi, Please try (all lower cases):         e9l11xqzb0 Regards.

1 more replies
Relevance 44.69%
Question: Fatal Error

Hi
I apologise in advance for being a bit vague. This happened some months ago while I was abroad and a lot was going on at the time.
I was using an old computer running Windows XP when for no apparent reason I got a blue screen telling me of a fatal error and that the physical memory was being dumped, acounter showed the percentage being dumped and when 100% was reached the computer switched itself off. Amongst the various messages on this screen was one saying that if this was the first time I had seen the message to try restarting the computer.
I tried restarting and some time later the same thing happened again.
My problem:- where is the fatal error likely to be? Is it the operating system or is Windows simply responding to a hardware fault.
As I said this is an old computer and I wondered if a failing motherboard battery would cause this or perhaps a partial RAM failure.
I have another identical motherboard from which I can take all parts which might be needed or if it is the operating system I have all the necessary disks, I am hoping that someone out there can advise where to start as I still do not have much time available for trial and error methods
Regards
phil
 

Answer:Fatal Error

When there is no idea what is causing the problem and time is short, one decisive method is to reinstall the OS and device drivers from scratch (or OEM partition or discs). If the problem goes away, it was software, if not, its almost certainly some hardware failure or conflict.
 

2 more replies
Relevance 44.69%
Question: fatal error

i
hi
i just shut down my system last night as usual.I was back today morning to switch on my laptop.
I was shocked that there is no file left in my documents and my music. All i got left was some pictures when i bought this pc(at the time of purchase).

Does anyone know what happened to my pc.Is it possible to retrieve the things back to normal?

i am using windows xp and the model is toshiba A100 -306

many thanks
 

Answer:fatal error

9 more replies
Relevance 44.69%
Relevance 44.69%
Question: fatal error

I have a hp that crashed. It's all explained in bios and motherboards under "SPEED". I have done full system recovery. At end it shuts down to reboot. In boot sequence, it logs a blue screen fatal system error c000021a. Terminate unexpectedly with status of 0xc000003a (0x00000000 0x00000000). Whats this and how do you make it go away?

More replies
Relevance 44.69%
Question: Fatal Error

Hi everyone - having a problem accessing a forum that I'm a member of.Every time I try to go to the site, all I get is a 'fatal error' message appear:Fatal error: Call to undefined function message_die() in /home/phpbbser/public_html/phpbb/common.php on line 207I'm running Windows XP.I'd be very grateful for any help! ps - the computer is a Tiny

Answer:Fatal Error

Quote from: Bramley on January 24, 2009, 05:25:02 PMHi everyone - having a problem accessing a forum that I'm a member of.Every time I try to go to the site, all I get is a 'fatal error' message appear:Fatal error: Call to undefined function message_die() in /home/phpbbser/public_html/phpbb/common.php on line 207I'm running Windows XP.I'd be very grateful for any help! ps - the computer is a Tiny

9 more replies
Relevance 44.69%
Question: Fatal Error

Not used for a few months, powering on and get fatal error system halted CNU94320DW - Enter Current Password. No idea what the password for this is. Tia











Solved!
View Solution.

Answer:Fatal Error

Hi, Enter   e9lovf71td     ( 3rd character is a lower case L ) Regards, DP-K

4 more replies
Relevance 44.69%
Question: Fatal Error in IE

I received a Fatal Error in IE @ 0028:c0011E36in vxd vmm<01) t 00010E36. Trojan - spy. HTML.smitfraud.c

I cant do anything on my computer to get rid of this. I cant access my virus scan program or any program or even operate in safe mode. How do I fix this?

Thanks.

Answer:Fatal Error in IE

Hello and Welcome to TSF

If you can boot it up and connect to the internet follow these instructions'

Scan your pc with one of these free online scanners:
Panda ActiveScan
RAV AntiVirus
Housecall. Be sure to put a check the box beside AutoClean.
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
Download / Install / Update / and Run:
Adaware SE check for any updates before running it.
Get the plug-in for fixing VX2 variants. You can download it at this SITE
To run this tool, install to the hard drive, then open Ad-aware->Add-ons and select VX2 Cleaner. Then click Run Tool and OK to start it. If it's clean, it will say Status System Clean. Otherwise, you will have to click on the Clean button to remove the VX2 infection.

Download and install Spybot S&D . Run Spybot and click on the 'Search for Updates' button. Install any updates that are available. Next click on the 'Check for Problems' button. Let it run the scan. If it finds something, check all those in RED and hit the Fix Selected Problems button. Exit Spybot. If you keep getting the DSO Exploit entries, even after you updated Windows and fixed them, then download the Spybot DSO Exploit Fix and install it over the current Spybot installation.

If you are unable to boot the system at all, slaving the drive on another pc and scanning the drive... Read more

7 more replies
Relevance 44.69%

while deploying the BPMN Application in jdeveloper i am getting the Problem in the SOA_Server. below is the error

Please provide me the solution.

#
# A fatal error has been detected by the Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000006d8d0776, pid=2292, tid=1736
#
# JRE version: 6.0_45-b06
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.45-b01 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# V [jvm.dll+0xa0776]
#
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#

--------------- T H R E A D ---------------

Current thread (0x00000000254b2000): JavaThread "Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms" daemon [_thread_in_vm, id=1736, stack(0x000000002fa30000,0x000000002fb30000)]

siginfo: ExceptionCode=0xc0000005, reading address 0x0000000024256cc0

Registers:
RAX=0x0000000024232b20, RBX=0x000000077f4b8efb, RCX=0x0000000000009000, RDX=0x0000000000009068
RSP=0x000000002fb2f2e0, RBP=0x0000000000000003, RSI=0x0000000000000003, RDI=0x00000000000000a5
R8 =0x0000000024232300, R9 =0x000000006d830000, R10=0x000000002fb2f4c0, R11=0x000000000000000c
R12=0x0000000000000000, R13=0x000000077f4b8f08, R14=0x0000000000000000, R15=0x0000000000000007
RIP=0x000000006d8d0776, EFLAGS=0x0000000000010202

Top of Stack: (sp=0x000000002fb2f2e0)
0x000000002fb2f2e0: 0000000000010000 000000006d8f387d
0x000000002fb2f2f0: 000000003fb16e52 000000006db... Read more

More replies
Relevance 44.69%
Question: Fatal error?

I think my Windows might be toast. I got some sort of virus and now none of my Windows icons (my computer, recycle bin....etc) opertae properly, I cannot open any folders, programs crash at startup. Icons have changed and system restore opens but to a blank white window. I cannot run a restore or anything. I am using Win XP home.

If this is reversible I would like to work through it. I do have an option of running an "out of the box" functionality restore which would save things I made with certain programs but not the programs themselves.

I can post a hijack this log later if it applies. Am I dead in the water or can you guys help me out? Thanks!
 

Answer:Fatal error?

7 more replies
Relevance 44.69%
Question: FATAL ERROR

PASSWORD CHECK FAILED FATAL ERROR.....SYSTEM HALTED2MC9212GFY

Answer:FATAL ERROR

@DN2? Enter    74eo737h8i Regards, DP-K

1 more replies
Relevance 44.69%
Question: Fatal error?

Hi all, have some information from an acquaintance who is stuck. OS = ME.

He installed a scanner, "genius colorpage vivid 1200 xe"?

Now when he boots up, he get error msjs,

1 - Enum\htree\root\o

2 - Sureg createkey failed!

These are both of the "click OK" persuasion.

Beyond that, just a grey screen.

And it won't allow starting in safe mode.

Any suggestions appreciated.

TIA,
Andy
 

Answer:Fatal error?

11 more replies
Relevance 44.69%

on XP PRO program dumps back to desktop then says

fatal error
access violation at address 0x33a649
or any where i can find info for it
 

Answer:anyone know what this fatal error is

16 more replies
Relevance 44.69%
Question: Fatal Error

My Pc keeps rebooting down when I try play games or whatch stuff
and then get this error

BCCode : 100000a BCP1 : 00000016 BCP2 : 0000001C BCP3 : 0000000
BCP4 : 804FA11E OSVer : 5_1_2600 SP : 2_0 Product 256_1
 

Answer:Fatal Error

That is a "Memory Management" Issue these are associated with Hardware Failures/Faults. Try starting off by running Memtest86.

Memtest86 Instructions
Download the pre-built version of Memtest86 (Link Below) and burn it onto a CD using ISO Recorder (Link Below) after this boot off the CD and start the test going and let it run for 3-5 hours (Minimum of 7 Passes) or Overnight which is best.

Memtest86 - http://www.memtest.org/
ISO Recorder - http://isorecorder.alexfeinman.com/isorecorder.htm

And Also Run Prime95 on all 3 tests, "Small FFT's", "Large FFT's" and "Blend". This will detect errors in minutes and automatically stop the program if it finds any. Post back once you have done these and tell me if there are any errors.

Prime95 - This corresponds to your OS which version it is 32bit or 64bit
32bit OS Version - http://files.extremeoverclocking.com/file.php?f=103
64bit OS Version - http://files.extremeoverclocking.com/file.php?f=205
 

1 more replies
Relevance 44.69%
Question: Fatal error

Hi,

I turned on pc this morning and installed ms update after which I restarted at which point it went as normal up untill the point of the desktop appearing and i got the message "fatal error" on a blue screen. I tryed safemode and went back to last known good config which worked shut down and went out when I came back the same thing happened but nothing in safe mode would work.

Any ideas?

Thanks.

Answer:Fatal error

Oh, I`m using winxp home
amd 4400+x2
a8nsli-deluxe
7800gtx 256mb
2xwd 320gb hdd raid(for speed)
4x512mb ballistix ddr400

2 more replies
Relevance 44.69%

When I try to switch between users. Syst goes into fatal error. But when I restart and sign in as the other user, it is okay. Comp has 4 users with 1 as the administrator.
Appreciate any insight as to why this is happening. Am running with SP2 installed.

Thnxs.

More replies
Relevance 44.69%
Question: Fatal Error

Hi ..I got a problem to reinstalling driver using sysprep.I had used it before but it got fatal error an hour ago.How can i fix this?

Answer:Fatal Error

Any answer?I think my laptop in bad shape now.Cannot login as admin.. Just Guest.

2 more replies
Relevance 44.69%
Question: Fatal error

When i try to start visual web developer , i get the fatal exception error and the program does not start , anybody have solution for it please help me.Thanks

Answer:Fatal error

Is there any further information with the Fatal Exception error gavinhodges00?

6 more replies
Relevance 44.69%

during installation of PAINT.NET i get the following:ERROR (1603)FATAL ERROR OCCURED and the installation FAILS!can anyone be the best and let us know whats wrong lol ? THANKS MILLIONS

Answer:FATAL ERROR!!!!!!!!!

Version 3.5.5?Here's a quote from the Paint.net forum:I got the 1603 error whenever I went to install version 3.5.5 on Windows 7 32 bit. I searched around the forums and none of the answers fixed my issue. Finally I checked to see if any other version of paint.net was installed on the machine. Version 3.36 was installed so I uninstalled it. The paint.net 3.5.5 installation worked fine after that.

2 more replies
Relevance 44.69%
Question: Fatal Error

I have a game "Bejeweled 2 deluxe" that when I try to open this message pops up, "Unable to prepare game executable" It was working fine from the time I installed it but two days ago it decided to pop up with this. Can you help
 

Answer:Fatal Error

How do I find a crack, so that I can copy and paste it? Also after I find the the "crack" to copy and paste, where do I put it? Thank you for your time.
 

1 more replies
Relevance 44.69%
Question: fatal error

Everytime I try to play my game on uproar.com I keep getting this fatal error...
0032 SetuplterateCabinet: C:/DOCUME~1/COMPAQ/LOCALS~1/Temp/SHZ18D.tmp
 

More replies
Relevance 44.69%

New update :Blue screen is :Extras Cyberlink Power DVD13Pictures and videosalso :get from time to timeFatal errorNo language file was founderror code 8024001FCould you please translatethanksNibirulilu78message edited by Nibirulilu78

Answer:How to fix fatal error

"Extras Cyberlink Power DVD13"Uninstall, using this 2 step uninstaller.Wise Program Uninstaller http://www.softpedia.com/get/Tweak/...http://www.freewarefiles.com/Wise-P...http://www.freewarefiles.com/screen...http://wisecleaner.com/wiseuninstal...

4 more replies
Relevance 44.69%
Question: Fatal error help?

I'm using Windows 7, and I recently installed google chrome and tried to watch streaming videos. All of a sudden my pc turns off and I get the blue screen. I try to restart but the pc wont start. I get the recovery disk and the pc works again, but this has happen twice, and here is the blue screen message the pops up. Can anyone help me figure out what this is?

C000021a
0x00000000 (0xc0000001 0x00100498)
 

Answer:Fatal error help?

something from microsoft about that error (note that its for xp, but might help for 7):
http://support.microsoft.com/kb/156669

since it occurs when you are viewing videos, are you using the correct drivers for your video? sound? chipset?
 

3 more replies
Relevance 44.69%
Question: Fatal error

My laptop is a Yoga 211, type 80CX, model CTO. Recently the battery had run down and the computer was off for a few days while i was on a trip. I recharged the battery when I got home, and when I turned it on last week, it started running a lot of  updates. Then it sent a message "Fatal Error C0000022 applying update operation 49991 of 51044 (\Registry...)", and the computer shut down. I tried restarting with no luck, same error message. After several attempts at restart, the computer gave me "advanced options". Tried several that didn't work, then I tried the option for "refresh". It got my computer restarted, but I lost several programs. I am currently reinstalling some of the lost programs, but I also lost Microsoft Office, and that would be expensive to replace. A friend told me today that his computer stopped working last week at about the same time as mine. What was this FATAL ERROR, and why did an update cause it? I am out of warranty on this computer, but what can i do to restore my computer and recover my programs?

More replies
Relevance 44.69%
Question: fatal error

got a problem i don't know if its just games but when i pin a game .exe execution to my start menu or make a shortcut and put it on my start menu or when it puts the .exe on my start menu because i use the .exe alot i get a fatal error when i open it up it from the start menu it reads:FATAL ERROR-signature check failed on propertiespartner.xml.... then i close the window and it procedes to open anyways and works. it seems to only happen whith games such as bejeweled, heavyweapon deluxe chainz ect. ones a reflexive game the other a popcap game. strange thing is if i make a desktop shortcut it works fine just when i make a short cut on my start menu i have problems. any help would be really cool.thanks

Answer:fatal error

Hi mrm0rgan -There should not be a reason to put the .exe in these areas - Just a Right click on the item in Programs (or My Documents) and place a Shortcut on the desktop is enough -You do not need the .exe there - If you do want it there then download the program to Desktop only and take/play it from there -I also have 2 Popcap games (including Bejeweled2 Deluxe) in My Docs and just a shortcut on the Desktop -Thank You -EDITED for spelling -

1 more replies
Relevance 44.69%
Question: A fatal error

This one is something else!!! I cannot get my game "Zuma" to even start. I'll click on the desktop icon to start the game & I get this message: "Fatal Error, expecting levels tag". I restarted the system on Safe Mode with Networking & redownloaded the game & it worked fine...then, restarted the system normally & clicked on the same icon & got the same message. I disabled my firewall to see if that was the problem & got the same thing.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 6142 Mb
Graphics Card: ATI Radeon HD 3450, 256 Mb
Hard Drives: C: Total - 595055 MB, Free - 396982 MB; D: Total - 15359 MB, Free - 1466 MB;
Motherboard: Dell Inc., 0M017G, A00, ..CN7443193L0398.
Antivirus: COMODO Antivirus, Updated and Enabled
 

Answer:A fatal error

Nope, didn't work.
 

1 more replies
Relevance 44.69%
Question: fatal error - help

2 times today i have had the blue screen pop up and I wrote this down.
fatal exception OE has occurred at 0028:C15F9A90 in VXD AF VXD ( 01 ) + 00001090

what did this mean...
 

Answer:fatal error - help

What were you doing when these errors came up?

Blue screens are sorta weird. 90% of the time they're ignorable and only require a reboot-and-forget. But sometimes they're also pretty definite indications of a bigger problem.
 

3 more replies
Relevance 44.69%

I get this message when starting windows...

STOP: c000021a {Fatal System Error}
The session manager initialization system process terminated unexpectedly with a status of 0xc80000004c (0x00000000 0x00000000)
the system has been shut down.

I can't do ANYthing! I can't even get into windows to do a system restore?

Answer:FATAL ERROR!? please help

tap f8 when booting and try
last known good configuration

1 more replies
Relevance 44.69%

So few weeks ago my computer was getting these blue screens of deaths, and eventually my hard drive died. Now with a new hard drive I am again getting blue screen of death.

Stop code is 0x000000001 and it mentions something about IRQ and mentions this filename: viamraid.*** something.

It seems to me like the drivers of my motherboard for a sata drive that I installed by pressing f6 when installing windows.

I do not know what to do now, my computer is not booting. Is my motherboard flawed?

do help, thanks.

Answer:Fatal Error!!! Again.

Microsoft Corporation

8 more replies
Relevance 44.69%
Question: fatal error

hi
not sure if this is the right forum to post or not! When trying to delete programmes (that I know are no longer on my PC) but appear in Add/Remove Programmes, I try to delete and I get a message saying fatal error!
can anyone help?
msiz
 

Answer:fatal error

6 more replies
Relevance 44.69%
Question: Help-FATAL error

I need help fixing "file error igxprd32" on my Dell Inspirion 1525 laptop???

Answer:Help-FATAL error

Try re-installing the display driver, Have you by chance installed Warcraft III? This seems to be a very commen error after installing that game

1 more replies
Relevance 44.69%

I have a Dell E1505. I ran several virus scans today, and removed unwanted programs. AFter i restarted, this message popped up. I can no longer even get on my computer. i tried running in safe mode. Please help. This is what it says,

STOP: c000021a [Fatal System Error}
The windows logon process system process terminated unexpectedly with a status of 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.
Any suggestions on what to do?
 

Answer:FATAL ERROR! please help

6 more replies
Relevance 44.69%
Question: Fatal Error

Hello, I downloaded an application and everytime I try to launch it I get the following error:"Fatal Errorfont descriptor error in fonts/title.txtUnknown command on Line 1main charlist offsetlistFailed to load fonts/title.txt"How can i fix this?thx

Answer:Fatal Error

What application?what op system?'fraid we are not mind readers a little more info is required before we can help.

6 more replies
Relevance 44.69%
Question: Fatal Error

Yesterday I decided to download and tryout a new game from

here

After it finishes downloading, I double click the install file and this is what i get a small popup window saying "Fatal Error Couldn't save the resources". Here's a screenshot of it.


I asked the games tech support and they had no solution to this error.

I'm running windows xp and I know I have all the updates for it. I checked for any viruses and spyware and my system was clean. Please, any help is appreciated. Thanks.
 

More replies
Relevance 44.69%
Question: fatal error

when i am playing pc games,it came up a message
-fatal error exception :0xC0000005 (ACCESS_VIOLATION) at 0187:6F02CAD6.
why........how to fix it
 

Answer:fatal error

6 more replies
Relevance 44.69%
Question: Fatal Error

Hello I hope i have posted this in the right place.
It is for my friend whos PC has crashed and she is absolutely stumped as to how to fix it.

She was working on safe mode
restarted the computer
and the a blue screen came up saying:
fatal error
system failure
followed by a very long code
She also said there was some spyware on her PC that she could not get rid of
and is pretty sure this has caused the problem
Is there anything that can she can do to sort the problem out?
 

Answer:Fatal Error

STOP: c000021a
Fatal system error
The session manager initiation system process terminated unexpectedly with a status of 0xc0000034 (0x00000000 0x00000000). The system has been shut down.
this is the message
 

8 more replies
Relevance 44.69%
Question: Fatal error

I downloaded SKIPBo Castaway from Game Solutions and everything was OK for a while. Now I geet the following message:Fatal Error. GetNumBytes failed due to MapAndLoad. The system cannot find the file specified. Any ideas? Thanks

Answer:Fatal error

Try re-downloading and Installing again.

5 more replies
Relevance 44.69%
Question: Fatal Error!

"fatal error! the media system on your computer is corrupt. Update your sound and video codec immediately to resolve this issue" I get this message. I found this same problem was posted by someone else. I am running PC Tools Spyware doctor and and it did not fix it the first time and in the process of running it again. Will this fix it and if not how do I fix it?

Answer:Fatal Error!

The process of cleaning your computer may require temporarily disabliling some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Clic... Read more

1 more replies
Relevance 44.69%
Question: fatal error

i posted earlier about my computer restarting on its own and then giving me a fatal error message for windows. i checked the details of it before they sent it to see what it said and it gave me to things that were being sent to microsoft. i was wondering if someone could tell me what they r. the first one is called minidump in my windows folder the other one is under my doc and settings wer3.tmp.dir00/sysdata.xml. ty in advanced for help if possible
 

Answer:fatal error

7 more replies
Relevance 44.69%
Question: Fatal Error

I'm Running a Pentium 4 with XP Pro, my computer cant find two Western Digital Hard Drives, one a 250 GB (WD2500JB) and the other a 80 GB I use both as back up and most of the time I have I them unpluged from the IDE port, the 250 GB is like a year old and the 80 is like 6 month old.

I have try it making it my primary slave, secondary slave, secondary master and always the same result, every time I turn on my pc I heard the hard drive making a clicking sound and then a message on a black screen saying something like "Primary Slave has a Fatal Error" and the only choice it give me is to restart my system.

I have important data on both hard drive and I wish I could save it, any idea if there is a way to fix these hard drive and what the clicking noise is all about? It sound like is trying to read the drive or something.

I was thinking as a ultimate option to buy another 250 GB and a 80 GB open both of them and changing the disk from the bad hard drive to the new one to see if I could read my data, just in case that the problem is not with the physical disc that store the data inside the hard drive.

Thanks

Alex
 

Answer:Fatal Error

so do either of these drives have an OS on it / them ?
im a bit confused about this .. you have them for backing up only and you have another drive with the OS on it and then u use these to back up important data ?
and as for the clicking sound . i wouldnt try using that hadr drive since you may damage it even more if you persist on trying to access it .
clicking SOUNDS VERY bad ...
 

3 more replies
Relevance 44.69%
Question: Fatal error 426

hello everybody!
i was trying to install windows xp sp2 ,but in the third step which is "installing windows" appears a notice 'fatal error 426' wich don't let me continue... what can i do please help me



best regards!

Answer:Fatal error 426

may you please give me an answer, please i'm bagging you , i'm waiting for...

2 more replies
Relevance 44.69%
Question: Fatal error

hello
i faced a problem during uninstallation of java(TM) 6 update 24, the error message is: Fatal error during installation. can anyone help me?

Answer:Fatal error

Version 6 Update 26 is the latest version of Java. I would recommend going through add/remove programs and uninstalling any installed versions, rebooting and then starting with Version 6 Update 26.

1 more replies
Relevance 44.69%
Question: fatal error

I keep getting a blue screen and dialog that sez "fatal error-windows will shut down to keep from doing damage to your co
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Yahoo!\browser\ybrwicon.exe
C:\Program Files\2Wire\2PortalMon.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Dell AIO Printer A920\dlbkbmgr.exe
C:\WINDOWS\system32\devldr32.exe
C:\PROGRA~1\Yahoo!\browser\ycommon.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVTray.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVRID.exe
C:\Program Files\Dell AIO Printer A920\dlbkbmon.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\ISafe.exe
C:\WINDOWS\System32\dllhost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\PROGRA~1\Webshots\webshots.scr
C:\Program Files\Microsoft Office\Office10\msoffice.exe
C:\Program Files\Yahoo!\Messenger\ymsgr_tray.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\VetMsg.exe
C:\WIN... Read more

Answer:fatal error

Hi and welcome. I think there may be a couple of issues in the log, but as a general rule, that error is usually hardware related.

Any new hardware additions lately? Or driver updates?
 

3 more replies