Computer Support Forum

Error messages - Display

Question: Error messages - Display

My computer (just over 1 yr old) has been doing strange things (several, little) lately, but I received an error message on a few occasions lately re Intel Graphics Controller. Error Message read:
The "BCCode:ea BCP1:82BBE810 BCP2:82CF17DO BCP3:82CF52C8
BCP4:00000001 OSVer:5_1_2600 SP:1_0 Product:768_1

C:\WINDOWS\minidump\mini021604-01.dmp
C:\DOCUME~1\Owner\LOCALS~1\Temp\WER2.tmp.dir00\sysdata.xml
The display driver for Intel[R] 82845G/GL Graphics Controller seems to be responsible for the system instability.
The driver for the display device was unable to complete a drawing operation. Please check with the device manufacturer for a driver update. "
My monitor has clicked off and I have had to turn system off, wait, and start it up again. Right now (obviously) I have the screen display working, but ...This may be a silly question, but do I call or go to Intel.com and search through files looking for Graphics Controler to download, or ??? I think there may be other problems too, but this is most immediate. I tried to do a 'System Restore' but was not permitted to complete this, whichever date I chose. Could have this caused an additional problem?

Relevance 100%
Preferred Solution: Error messages - Display

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Error messages - Display

7 more replies
Relevance 59.04%

Every minute or so my Dell PC freezes, then comes back and displays the message "display driver IGFXstopped responding and has successfully recovered". Sometimes the screen pixellates and " breaks up". Any ideas about a fix or is it time for a new PC?

Answer:Display error messages

It would have helped if you had advised of your OS and graphics card and what you are doing/playing when this occurs.
It could be that you have an incorrect refresh rate selected, you are low on memory or maybe a broken driver. Have a look at these posts and see if anything suggested helps.
Vista problem
HP solution
MS solution

4 more replies
Relevance 58.22%

I use XCOPY to automatically backup my files.
I use the following switches:
/C - Ignore errors
/Q - Copy quiet
I would like to see a report of any error XCOPY encounters while copying, but I have not been able to figure out how to do this.
Does anyone know if there is a way to make XCOPY provide error detail even while using above switches?

Answer:XCOPY - How do I display error messages?

Hi and welcome to SevenForums,

XCOPY doesn't really contain switches for error reports - any errors would simply show up in the cmd window.

Longer term, you may want to consider using something like ROBOCOPY, which is more robust and offers better reporting and mirroring (shorten backup time significantly) capability:

Type
Code:
robocopy /?
at a command prompt, or try this tutorial:

ROBOCOPY - Create Backup Script

Regards,
Golden

6 more replies
Relevance 57.81%

Running Vista in a Dell Dimension E520. Verizon is my ISP. Every once-in-a-while when attempting to display a message I get instead a error window that says "Message Could Not Be Displayed", or something close to that. Sometimes also when I attempt to delete the undisplayable message I get an error window saying "Message cannot be deleted", or words to that effect.

Is this the fault of Vista, Verizon, me, or some malevalent god?

In any event, what do I do about it?
 

More replies
Relevance 56.99%

Hi,I bought the laptop hp spectre x360 last august, and I started to have problems about 1 month ago. Frenquently while I am using it, an error message appears on a blue / orange screen and the system restart (closing all applications and workings). It may happen up to 3 times in an hour and I have noticed that happen above all during internet navigation.The error code displayed is not always the same. Some of those that I can report are: - DRIVER IRQL NOT LESS OR EQUAL-PAGE FAULT IN NONPAGED AREA- IRQL NOT LESS OR EQUAL- BAD POOL HEADERThe system is updated and I didn t do anything that may have caused this problem. Please help me, I don t know how deal with it!

More replies
Relevance 56.58%

Hello everyone!
I am not sure if this is the correct forum for this post, but my issue does deal largely with my display. If so I apologize in advance and ask to be directed to the correct forum.

I have searched the boards for similar issues and I have tried their approaches but it has not resolved my issue.

I am experiencing issues with my ASUS graphics card and my Intel HD display driver. Whenever I am playing a videogame or doing something that is graphics intensive, my display freezes and I either have to reboot my machine or sometimes the display unfreezes and I am allowed to resume my activities.

I originally had graphics driver 295.73, but I upgraded to version 296.10 when it came out.

I still had the same issue when I upgraded my driver so I rolled back to version 295.73. I kept bouncing back and forth between the two drivers and I even tried going into safe mode to install the drivers.

Twice while I was using AutoCAD and playing a videogame, the display became distorted and showed pixelated colors.
I installed the 301.24 driver when it came out on May 22nd, but the problem occurred again while I was playing a game and while I was in AutoCAD.

In the rare instances that my display froze and unfroze, I received a windows notification from the windows event log stating that my driver 295.73, 296.10, or 301.24 failed.

I have performed numerous diagnostics and stress tests using Ultimate Boot CD.

My memory tests have checked out fine and so hav... Read more

Answer:Display and Machine Randomly freezes (No error messages or BSOD)

Anyone?

2 more replies
Relevance 54.12%

Whenever and wherever I try to access Windows Update, I get: Internet Explorer cannot display the webpage.
Yes, I am connected to the internet.
Yes, I have tried accessing from several different places/options with the same results.
Is this a virus I have that is blocking the site?
I have run all of my anti spyware, malware and anti virus programs and all I receive as a threst are tracking cookies.
I have recently been receiving a yellow security updates loading icon in the lower right task bar, but cannot click on it. Always displays as downloading updates 0% and then will disappear/appear at random. Been getting a lot of WIN32 hosts error messages as well and that the program needs to close, then my machine freezes and I have to just shut it off.....
I have also tried system restore and even that will not go through. Acts like it is doing the restore then when machine reboots, it says the system could not be restored to this point try again or cancel. I have tried MANY restore points, all have failed.
Also, when clicking on my desktop shortcuts to Yahoo Mail, Google, etc. I receive a separate window loading that takes me to a "Google" page that offers a 'work at home from Google' webpage, that I have to click off quickly or it loads then makes me click on another pop up asking if I'm sure I want to leave that page....................................................................I'm thinking this is all related to some type of virus, but ha... Read more

Answer:Solved: Windows Update won't display, Win32 error messages, Google offer page popup v

wont let me post hijackthis log file now !
just takes me to the Internet Explorer cannot display this webpage wth ?
 

2 more replies
Relevance 49.2%

I was trying to install an HP Printer. It would not install. I called HP and an HP Tech accessed my computer remotely. He pulled up a bunch of error and stopped working messages. He said my computer was about to crash. He wanted a ton of money to fix it. I have no money, so here I am. I have attached a summary of my computer. I am really computer stupid so any help I can get will be truly appreciated.
Annette Manaclay

Answer:[SOLVED] Error messages and stopped working messages, Windows 7

I don't know where to begin. Let's start be deleting all old versions of Java in your control panel and updating at: java.com: Java + You
Also, stop using ToolWiz and Optimizer Pro These Registry Cleaners cause the kind of problems you're experiencing.

19 more replies
Relevance 45.1%

I have windows 98, use internet explorer as my browser, and have USOL as my ISP. When I try surfing the net I seem to get the " can not display page" an awful lot. I try the refresh button to no avail. When I do get to a page I want to view I get " done but with errors on the page. I have dial up service which is the only option I have in my area, so I understand that dialup makes for slow surfing. This is very aggravating. Even just now when I tried to send this It gave me the can not display page message so I had to retype this as it showed that I had no messages in my account, so I assumed it did not go through. Is there any solution for this problem. thank you for any help you can give me.
I am new to this site and so far I seen some interesting stuff. Glad i found you, In a book that called " Free Stuff If Your Over 50."
 

Answer:can not display page messages

Hi and welcome to TSG.
Fisrt thing to try is in IE>tools>internet options.
General tab..clear>temp files>cookies>history..include offline content.
Security and Privacy tab>click Default.
Advanced tab>scroll down and Tick..do not save encryped page to disk.
Programs tab>reset web settings.
Let us know if that helps.
http://support.microsoft.com/kb/326155/?sid=RMVP
 

1 more replies
Relevance 45.1%

I have heard that there iis a gadget that you can connect to a phone so that deaf people can read the messages left on their phone. Is their such a thing? What is it called? Has anyone here ever used one? Thanx.
 

Answer:display phone messages

http://en.wikipedia.org/wiki/Telecommunications_device_for_the_deaf
 

2 more replies
Relevance 44.69%

The toast messages are nice, but I would prefer them on a secondary monitor as they tend to overlay what I am working on. Anyway way to move them to another monitor? Thanks!

Answer:Is there a way to display toast messages on another monitor?

Originally Posted by Windows Central Question The toast messages are nice, but I would prefer them on a secondary monitor as they tend to overlay what I am working on. Anyway way to move them to another monitor? Thanks! that's an interesting idea - I'm going to try find a way when I get home
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

1 more replies
Relevance 44.69%

I'm running Windows XP and have updated to SP2. I've had this Outlook problem for a while (before SP2 update) but need to fix it. Although messages show in my Outlook Express Inbox (complete with sender's details) when I click to open them I get the message "Message could not be displayed. Outlook Express encountered an unexpected problem while displaying this message. Check your computer for low memory or low disk space and try again."However, this problem does not affect any of the other three Outlook Express accounts that are running on the same PC. I'm a Telewest BB customer and can access my mail via their Webmail service where this problem doesn't occur, but would prefer to use the proper system.Any suggestions please?

Answer:Outlook Express cannot display messages

....my mistake, it IS now affecting the other Outlook Express accounts on the PC in the same way. Mind you, if I click on a message in any inbox as the mail is downloading, I CAN see them. It's only once all messages are downloaded that the problem occurs.

3 more replies
Relevance 44.69%

Hello. First, I am not very computer literate. (Sigh). (I'm old!) I have a problem with Outlook Express. It stopped allowing me to click on the hilighted New Messages and see them. It still receives messages, I just can't reach them, they don't show up in the inbox. I was able to finally find them manually, by going into Edit, then Find, then find messages in folder, and putting in a check by "find messages received before", then somehow lucked onto finding one, and it listed them.
I don't know what to do to get the thing to simply display the new messages in inbox. (It displays them in a darker ink).
I would appreciate any help.

I did call my provider, Adelphia, but they couldn't help.

Thanks!
 

Answer:Outlook Express won't display new messages

7 more replies
Relevance 44.28%

The messages received using windows mail do not display graphics but only a box with an X shown. The box allowing graphics to be shown is checked. Other mail programs do show the graphics. Please help.
 

Answer:windows mail-does not display graphics in messages

This is a guess as I know WM is a clone of Outlook so I am guessing that it also has under "options" "Trust Center" where you need to allow embedding and attachements or "Options" where securioty settings are blocking this as in Outlook Express...areas to check anyway as I don't have WM installed on any pc at the moment.
 

1 more replies
Relevance 44.28%

I can't figure out the pattern that triggers it, but several times a day I will click on a message and get am error response saying OE "could not display the message" and suggesting it is a memory problem. When that happens, clicking on any message produces the same result. At the same time, I am unable to delete messages from the folder, although I get no error message, just no action. When I close OE and reopen it, the problem goes away for a little while, then returns without warning. I have plenty of memory and disk space available, although sometimes I notice 100 percent of CPU is in use and I can't tell why.

I have:
--Shrunk my folders and compacted them
--Reinstalled Internet Explorer 7 (including OE) after using regedit to zero out OE, which one tech suggested as the way to uninstall OE.

Thanks for any advice you can offer.
 

Answer:Can't display or delete messages in Outlook Express

I had this same problem for the last few days and then all of a sudden, my e-mails started disappearing. I lost several thousand e-mails earlier today and am wondering how, if it's even possible, to get them back. Any clue what's causing it and it there is a solution?
 

1 more replies
Relevance 44.28%

(Cross-posted in "All Other Software")

I got a new Toshiba Notebook which came with Vista Home Premium installed on it.

After doing a bit of research, I found out how to move my Accounts and Messages from Outlook Express on my old machine. Everything appeared to be fine, but then strange things started to happen:
First, the folders don't appear in the left-hand window. I have about 50 different folders, some of them nested, but only "Inbox" shows up, and when I select that, the right-hand window says, "There are no items in this view despite the fact that the Inbox folder shows 33 unread messages.
When I select "Local Folders" all of the folders show up in the right hand window.
When I double click on any of them, they appear in the left window, but again, no messages.
When I try to do a "Find" and select "Browse" to designate the folder, the only option that appears is "Windows Mail."

Clearly something had become corrupted. I'd be happy at this point to just start over from scratch, but I'm not sure how to do this or which files to delete to restore the program to its initial state.

Any help will be greatly appreciated. Thanks in advance!

-- Ron
 

Answer:Windows Mail Doesn't Display Messages

1. Try going to View/Layout and make sure you have the folder list ticked. I prefer the folder BAR unticked.
If you still have nothing there. Try importing again. "File/Import" from your *.wab on XP (Documents and settings/"username"/Application Data/Microsoft/Address book.)
3. and 4. and 5. is the normal default. No problem there.
 

2 more replies
Relevance 44.28%

(Cross-posted in Windows Vista)

I got a new Toshiba Notebook which came with Vista Home Premium installed on it.

After doing a bit of research, I found out how to move my Accounts and Messages from Outlook Express on my old machine. Everything appeared to be fine, but then strange things started to happen:
First, the folders don't appear in the left-hand window. I have about 50 different folders, some of them nested, but only "Inbox" shows up, and when I select that, the right-hand window says, "There are no items in this view despite the fact that the Inbox folder shows 33 unread messages.
When I select "Local Folders" all of the folders show up in the right hand window.
When I double click on any of them, they appear in the left window, but again, no messages.
When I try to do a "Find" and select "Browse" to designate the folder, the only option that appears is "Windows Mail."

Clearly something had become corrupted. I'd be happy at this point to just start over from scratch, but I'm not sure how to do this or which files to delete to restore the program to its initial state.

Any help will be greatly appreciated. Thanks in advance!

-- Ron
 

Answer:Windows Mail Doesn't Display Messages

Hi,

I have just bought a Toshiba notebook (coincidence?) and have similar problems in Windows Mail after importing mail from Outlook Express 6. I have copied the folder with dbx-files, disabled read-only, imported via menu in Windows Mail.

When moving/deleting a folder the changes are not visible in the folderlist. Only after closing Windows Mail and starting it again. After restarting Windows Mail the content of the folders is gone! I only get the message "Folder cannot be displayed" (or something similar, notebook is not available to me right now) in the Preview Pane

Have you had any luck so far? Or does anybody else have a solution?

TAI!
Lucas
 

3 more replies
Relevance 44.28%

any idea how to fix this

scanned with norton and housecall antivirus, spybot and lavasoft i removed java nocheat.a virus but don't think this was the reason, there must be something else ...

need help. thanx

pd: OE version is 6.0
 

Answer:outlook express does not display messages contents

12 more replies
Relevance 44.28%

The threadClick the File tab.
Under Help, click Options.
Click Advanced.
Under Display, in the Show this number of Recent Documents list, click the number of files that you want to display.
simply does not work. The "Show this number of Recent Documents list" is grayed out and not clickable.

How do I fix this?

(OS is Windows 7 Home Premium.)

Answer:Can't Display Recent Messages in Word 2010

Are you using CCleaner or something similar?
If so, you may need to uncheck Microsoft Office in the applications section.

2 more replies
Relevance 44.28%

Something has gone wrong in my registry (following a registry clean-up!) such that Outlook Express will no longer display any messages. OE starts OK and all the bar functions are present. It accepts incoming mail and you can compose a new mail, but alas, no folders or stored messages can be displayed.Fearing it was a registry problem, I did a restore operation on the registry cleaner (Advanced Windows Care) to go back to the previous settings and initially this enabled me to see the list of messages, but when I tried to open one, I got the message 'Not enough memory' - even though I have 2GB RAM. (Admittedly, I do need to clean out some of the messages, but they were recently compacted, so hopefully that isn't the cause of the problem.)On subsequent tries, I am back to the 'no messages displayed' state.Everything else I have tried on the PC seems OK. How do I restore OE to work correctly without having to re-install it?All suggestions welcome.Thanks, Tallboy

Answer:Outlook Express fails to display messages

When I had a problem with OE this fix was suggested click here for heavy mail usage. My problem turned out, eventually, to be related to something completely different (OS corruption) but it may help you.

10 more replies
Relevance 43.87%

Computer xp home, service packs 1&2, with latest edition of Outlook Express. My problem, when I open my attachments the ones with animated images fail to open or display contents. When I click on open a window appears. The blue window bar reads C:\Documents and settings\Local settings\Temp int files\Content ie5\bf... The main message window reads. This file does not have a program associated with it for performing this action. Create an association in the folder options control panel. Can anyone explain the reason for this message and why things are the way they are. Your help appreciated

Answer:Outlook Express Fails to display all messages cont

Can you please give the exact filename for the attachments that do not open - the problem (probably) is, you don't have the correct software for them.The part in the filename after the dot is the important part.

10 more replies
Relevance 43.87%

OE doesn't display messages in inbox and other folders. Have checked all accounts, identity, display settings etc. Tried rebuild of inbox.dbx to no avail.
Any ideas?? Thanks
mentieth
 

Answer:Solved: Outlook Express doesn't display messages

7 more replies
Relevance 43.87%

We are using Outlook 2002 on Windows XP Pro computers and Exchange 5.5 on an NT4 server.

Our Outlook is taking about 20 minutes to display the list of new mail in the Inbox.

If you delete a mail, move to anothe folder then the list refreshes and all new mail is displayed.

Any body point me at a likely soolution?
 

More replies
Relevance 43.87%

Today, for some unknown reason, my Outlook Express will not display mesgs in the Inbox. It makes the ping sound and shows 1 message received in the task bar area, but the messages do not appear in the Inbox. I did a search, using Edit Find and the search feature could not find the message, so there isn't a filter set up. The mesgs are not anywhere. I can only read new mail by logging into my account using a web browser. Can anyone help?

OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz, x86 Family 15 Model 2 Stepping 7
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA GeForce4 MX 440 (Microsoft Corporation), 64 Mb
Hard Drives:
C: Total - 55003 MB, Free - 9405 MB;
D: Total - 50006 MB, Free - 21790 MB;
E: Total - 47614 MB, Free - 13563 MB;
Motherboard: ASUSTeK Computer INC., P4PE , REV 1.xx, xxxxxxxxxxx
Antivirus: Norton AntiVirus, Updated: Yes, On-Demand Scanner: Enabled
 

Answer:Solved: Outlook Express Inbox does not Display New Messages

11 more replies
Relevance 43.87%

The space is totally covered by the keyboard. I need the phone to show the response space the way it appears when responding to SMS

More replies
Relevance 43.87%

Hello:

My desktop is only 3 months old, but has XP.

For the last three weeks, it has been doing the following:

1. Corruption of display

I use mostly MS Word and IE. Title bars and menu bars of these program start to appear a bit distorted. Some areas appear black, transparent or semi-transparent, etc. Text sometimes does not appear. Sometimes text appears that does not belong there. Sometimes text inside of Word documents disappears, changes sizes, etc. Sometimes all text disappears (including "start" on the start button).

Over time, it seems to be getting worse. Today, my entire desktop background turned into a colorful "TV static" image. Random dot pattern, and this pattern appeared in some parts of MS Word.

2. "Insufficient memory" messages.

Occasionally and intermittently:

Something like (in Word) "insufficient memory to display a font."
When trying to save or copy "Insufficent memory" or similar errors appear that should not.

These problems always resolve when I restart the machine, but inevitably return within a few hours of use.

Avira Anti-Vir reported some problem "unable to load" a .dll file, I think. I re-installed it, and that has not since recurred.

Avira and AntiMalwareBytes scans show no problems.
I cannot think of what change I may have made to the system. It possibly coincides with installing uTorrent.

I have some saved copies of the registry going back since the system was n... Read more

More replies
Relevance 43.87%

Is it possible to configure Outlook 2000 to show a dialog box with a progress indicator when sending and receiving messages (as Outlook Express does)?

It's so annoying not knowing what is going on behind the little "Delivering Messages" dialog. Those of us with dial-up connections need to be able to make decisions about whether to terminate a send-and-receive if some turkey with broadband has sent a 10MB attachment which will take an hour to download through a dial-up.
Maybe there's a customisable setting or a download for installing such a dialog showing download progress?
 

Answer:Outlook 2000 - how to display progress when delivering messages

if in outlook you go to
>tools
>send&recieve settings
>show progress
 

2 more replies
Relevance 43.05%

I have changed the settings to do so back and forth with device restarts. Nothing seems to be working.

Answer:How do I get my text messages to display on the lock and start screen tile?

Well first the tile has to be at the largest size I believe.
and you would set the setting in Lock Screen settings for the lock screen thing.

more replies
Relevance 43.05%

When typing a message my keyboard stops responding and shows a blue (thinking) circle.

Answer:Why do my email messages stop typing and display a blue circle?

It's pretty hard to assist when that's all the info we have.
Please try registering for an account and providing us a bit more information in this thread.
What device are you running? Is this a phone? Tablet? Desktop? Laptop? What model device? What version OS are you running? What email program are you using?

2 more replies
Relevance 43.05%

Ok Im totally baffled as to what to do. The internet help desk doesnt know what to do, and I cannot find anything out on the problem I am having in microsofts knowledge base. Ok here is what is going on and all that I have tried. A couple of days ago I started having problems with OE in which I was getting a message that read ..Couldnt open address book, OE is not configured correctly please reload outlook express. So on the advice of others I dumped my outlook express and internet explorer. I then under advice from friends of mine who work at an internet help desk, I downloaded and installed the IE5.5 service pak. I installed it and still had the same problems with outlook express. So one of the things that my friends told me to do was to go in and delete my address book and then outlook express will make a new one. I did this and it took care of the error message that I was getting. I can send messages and recieve them but they wont display in the preview pane. Every email now comes in as an attachment and the only way to see them is to click on the attachment then either open it as an html file with IE or test only with word pad. If anyone can help with this I would greatly appreciate it.
 

Answer:Outlook express5 wont display messages in preview pane

If you have gone into the options and set it up there and also unde view there is only one other place where the settings are stored other than the registry.

In your profile. Delete it and create a new one.

It shoud be in C:\windows\Application Data\identies Delete the folders inside the identies folder
AND WELCOME To TSG
 

2 more replies
Relevance 43.05%

I run 64-bit Windows 10 on my PC and use Windows Live Mail for viewing my email messages. Even when I have the sender's address in my address book, about 20% of the messages come through with black boxes (with a white cross in them) as 'place holders' for the images that should show up in the message.
In many cases (but not all) the sender has a link at the start of the message saying 'if you can't read this, click here to open in a web page', so you can see the images. However, how do I get all email messages to display images correctly?

More replies
Relevance 42.64%

Outlook 2007 has begun to behave strangely.

Plain text messages received do not display in the font selected in Tools>Options>Mail Format>Stationery & Fonts>Composing and reading plain text messages

These incoming messages are suddenly displaying in a smaller font, Time New Roman 10 (or some paragraphs Tahoma 10) even though the more readable default font Consolas 10.5 is still set there.

No changes to font and size in that dialogue have any effect at all on *received* plain text messages (but new *created* messages respond to changes made in the dialogue)

Created plain text messages correctly use Consolas 10.5 or any other setting when selected, the problem is only received plain text messages.

Anyone have a clue?
 

Answer:Outlook 2007 display plain text messages options voided

9 more replies
Relevance 42.64%

I'm using a relatively new Dell Studio laptop. I have Office Professional 2007 with all current updates. I have POP set up for my Gmail account.

Outlook appears to download messages, it just doesn't display that there are new messages until I click on a different folder and then click Inbox again.

What would cause this?

Thanks,

~N
 

Answer:Outlook 2007 - Inbox doesn't display messages until I click a different folder

multiple people at work have this same problem, laptops and desktops, all Dells with Xp.
 

3 more replies
Relevance 42.64%

I am using Windows ME in a new Dell Dimension 4100 series, Pentium 3, 1.1 gig, MSN Office 2000 Professional.

I am having trouble saving a word document that was e-mailed to me. I did a "save as" into "my documents." Then I changed something in the document, and I saved it. Upon closing the document I was asked if wanted to save changes and I said yes.(this confused me as I don't normally get this when I do the normal 'save' under the 'file tab')
Later when I went to open this document, I got an error message, "Locked for editing by another user, click notify to open as a read only copy". When I clicked on notify, I got another error message,"Winword has caused an error in winword.exe. Winword will now close.Try restarting your computer."

When I tried to delete this document, I got the message "Cannot delete file. Access is denied. Source file may be in use."

I experimented and again saved into my documents, again made a change, hit save and closed the doc. When I got the message asking me if I wanted to save the changes, I said no. This procedure enabled me to reopen the document.

I don't understand what is happening and why the key seems to be how I answer the question, do you want to save the changes?

Can someone help?
Thanks
 

Answer:Word doc-error messages: locked, winword error, source file

SOUNDS LIKE (tho I'm not sure), that Word didn't exit properly at least that one time. Next time it happens, and you believe Word to be closed, hit Ctrl-Alt-Del and see if "winword" is still in the task list. If so, click on it and hit End Task. Then delete your file.

If your programs aren't "really" closing down, you may just need to clean up your hard drive. Follow the instructions at:

http://www.piersontech.com/07-CleanHardDrive.htm
 

1 more replies
Relevance 41.82%

I am having problems with my computer starting in safe mode all the time. I have tried going into msdos and putting in boot 0 and changing read only stuff back again but to no avail.(ie) brindle 10-20-03.. help! I must have changed something some where eh? Also I keep getting these error mess. more and more. I have aim and just recently it started giving me mss about that and if I don't catch the pop up window that comes with aim, in time then my puter freezes on me and I have to shut down and go in again.. Also....... I am still getting the start up mess of a file is missing and to delete and uninstall etc etc then it has Mcaffee system ini etc etc ,...Well I went and deleted all Mcaffee stuff as recomemned by styxx and am still getting this at start up? HELP I am ready to throw this out the window... no pun intended! My husband thinks I have ruined his computer and is still giving me dirty looks..... I have windows 98se. 254 mgbytes memory, I think,and have dsl...Help
 

Answer:safe mode and startup error and error messages

Have you tried going into set-up and resetting all controls to "default setting"?

You're computer is most likely going into default mode because there is something else wrong with it.

You most likely haven't ruined it........jus need to take this one step at a time

What were the first error messages you were getting?

What happened the first time your computer started in safe mode all by itself?
 

1 more replies
Relevance 41%

I'm being bogged down with script error messages, error report request and the odd IE6 termination. Here is a copy of my HiJack This log (saw another post with similar questions and that was what was requested, so here it is). I have a HP Pavilion pc running Windows XP Home Edition. Hope someone can help because these constant error messages are driving me nuts.

Logfile of HijackThis v1.98.2
Scan saved at 11:40:16 AM, on 9/19/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\svchost.exe
C:\windows\system\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\Unload\hpqcmon.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\PROGRA~1\Logitech\MOUSEW~1\SYSTEM\EM_EXEC.EXE
C:\Program Files\MSN Apps\Updater\01.02.3000.1001\en-us\msnappau.exe
C:\WINDOWS\LTMSG.exe
C:\Program Files\Java\j2re1.4.2_05\bin\jusched.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\PROGRA~1\HPINST~1\plugin\bin\pchbutton.exe
C:\Program Files\Hewlett-Packard\AiO\hp officejet v series\FRU\Remind32.exe
C:\Documents and S... Read more

More replies
Relevance 41%

Hello - I have a Toshiba Satellite laptop and for the last few days - I've suddenly gotten error sounds without any error messages - I've checked the administrative tools event log but can't really locate the source of the sound. What could be causing this? thanx in advance for the help

npsmith34

Answer:Error sound without error messages on laptop

Hello npsmith34,

Okay so you have weird sounds

Can you describe these sounds ? are they beeps ?are they clicking sounds ?

When a computer starts making sound it could be many things as in

over heating

bad fans

hard drive issues

cd rom issues

and many other things

Let me know

ATKrider

1 more replies
Relevance 40.18%

Hello all

this is the problem i have my laptop some time ago decided not to display correctly i have described it as garbled in the thread title but i'll clarify that now, sometimes vertically or and horizontally repeated display, lines that run through the image, it is not nice to look at and sometimes completley impossible to use. Recently it has been more or less non-existant occasionally flickering on and off.

it does not happen during dos screens (as far as im aware), and does not start until the windows logo appears and begin to load(the blue bar moves).

it happens on the bios screen, if thats what it is called.

my laptop is covered by a warranty it has been sent away around 3 times,
it came back clean (they only check for hardware problems) the third time it was sent away it was as urgent/special and they had it on for 39 hours powering on and off around 50 times, and they could not replicate the problem (which is strange because it happeneed within around 3-4 hours when i got it back).

i was not really given much help on their helpline, i was asked to check an external monitor i had already tried this and confirmed it worked, and also a girl who was a little more helpful than the rest suggested reinstalling video card and updating power management driver, i did both they did not work, but i tried them again and i have had no problem for months, until recently.

she said she was leaning towards the problem being software (when i mentioned the dos screens) and... Read more

More replies
Relevance 39.77%

Please someone help me im using win 98 2nd and every or most programs i close while using IE6 have given 2 error messages the first was IEXPLORE caused an invalid page fault im module kernel32.dll 0167:bff9db61 and now instead of this which it has always shown its now this IEXPLORE CAUSED A INVALID PAGE FAULT IN MODULE WSEM214.dll at 0167:021c236f. ive run virus killers the system is clean but im also getting fatal exception blue screens as well most mornings i boot up and it takes about 6 reboots before loading please help the unfortunate me thankyou. TIM
 

Answer:constant error IE6 error messages!!!

Hi dj tk ,

Please do the following ,

Download and install Spybot search & destroy www.security.kolla.de Open Spybot search & destroy , Click Online , Search for updates , Download all available updates , log offline , Close all browser windows , check your taskbar for minimized windows as well , Run Spybot search & destroy , put a check in every entry Spybot search & destroy returns , Click fix problems.

Shutdown & Reboot your computer

Download Hijack This www.tomcoyote.org/hjt/ Press Scan , Scan button becomes Save log button (Do not fix anything yet) , Save the log in the same folder Hijack This resides in , Copy and Paste the log to the forum.

Good luck
 

3 more replies
Relevance 39.77%

I'm a new user to this forum. My operating system is Win. Me. I bought this computer in 2001. There is still one error message I still get(occasionally) while on internet(using presently IE6.00). "An error has occurred, press any key to return to windows, etc." When I press a key, I usually get OD error, similar message as described(blue screen, does not say fatal error). I have re-installed operating system 3 times(I will not use recovery disc that came with this computer). I have read about this error on microsoft's site. I believe that this is caused by Mcafee components(4 or 5 items in startup) or Internet Explorer.
(for a short time, I switched to Mozilla, at that time I did not receive any 0028 or OD errors while on net; these errors only occur when online, eg: I click on a link, screen turns blue, and errors mentioned occur)
Tech support at Mcafee advised me to go into internet properties and "allow active x"; can't remember exactly what she said. I do have security on medium and privacy on medium, some sites that were detected by ad-aware I have entered in section:never allow cookies on these sites(within privacy tab in IE.
Anyone who can help me out on this issue, feel free to post. Moderator or adminisrator can email me. Thank you.
win me
316mb ram
IE6.0028
Mcafee 2005 9.0 boxed edition, dats updated.
 

Answer:Error 0028, error OD messages

sounds like a RAM issue with ME OS. Sometimes what happens is 2 progs try and grab the same piece of RAM and ME doesn't know what to do, so it freezes and goes into a BSOD. Do you run intensive graphics progs, like games. I had this issue all the time when I had ME, but once I upgrade to XP pro, no more BSODs.

You might be better to post this in the hardware forum, or browser forum if there is one on here, I'm usually on here, in security, but i know what you're dealing with. one suggestion, don't leave your pc on for days runing ME OS, as it starts to leak RAM .

Also, right down the error you get, usually and exceptional error, copy and paste it into a google and research it, to find out what's causing it, it might be, as you suggest be McAfee, if it's an intensive user of your resources.

See if Microsoft have a patch available. Or, last resort, consider upgrading to Xp, less hassle and more stable, but your call of using Mozilla is a good one, less security issiues with Mozilla, and it doesn't use Active X controls as far as I can remember!

Hopefully this will help you out in some way!

khaz
 

3 more replies
Relevance 39.36%
Question: Error Messages

I've run into this problem at work, as well. When I log on to my ISP and my start page comes up, I often get a Runtime Error message when I try to click onto the address line to enter a URL. I can't do anything with the page after that.
I also notice not all my favorites are in the list, either. I use People PC as an ISP.
The message is generally "Runtime Error. Line ** object expected. Do you want to DeBug? Yes or No?". Whether I click yes or no doesn't seem to matter. Nothing happens. I have to open a new internet window to start moving around. I did call our IS person at work when I ran into the same thing and she had no clue. She didn't seem to be concerned about it, though.
Any help would be appreciated. Thanks.

More replies
Relevance 39.36%

When logging on, I receive 2 error messages:
1) Musicmatch load problem ... Message: Specific module can not be found.
2) Microsoft Visual C Runtime Program
Application requires runtime terminate in unusual way. Contact application support
team for more information.

How do I get rid of these error messages?

Thanks for your help.
 

More replies
Relevance 39.36%
Question: error messages

hello
i am a little new at all of this but i am needing assistance with someone that is maybe specialized in an area. i am working with winxp and i run windoc from systemworks and every other day i am getting many errors. i am also wondering if there is something fishy about an unknown user having access to a few programs or in the registry. that will help me. already have had wiped drive and re-installed a few times. thank you
justjesse2
 

Answer:error messages

Not every "error" Windoctor detects needs fixing.

Without details about every single error and having first hand acces to your computer it's almost impossible to offer any useful advice.

If your unsure about what to do about them, either let Windoctor fix them (it backs up everything it does), or stop using the application.

Are you having any particular problems we should be aware of, or are you getting Windows error messages?
 

1 more replies
Relevance 39.36%

I was recently trying to format my external hard drive (my passport) to FAT32 in order to transfer files to my PS3. While I was trying to figure out which would be the best possible way to format the HD the volume I assigned drive letter that was still in a RAW partition state disappeared. I have a DISK1 of unallocated space, but it is not initialized. When I try to initialize it an error messages pops up reading "I/O device error" If anyone could be of assistance it would be extremely appreciated.

WoP
 

Answer:i/o error messages, help please!

That generally indicates a faulty drive. Bt you should also chack your connections.
 

2 more replies
Relevance 39.36%
Question: error messages ?

Im getting an error message everytime i log on to my windows xp that reads invalid backeb app 7288971 anyone have any ideas ??
 

Answer:error messages ?

Get these, install, check for updates and run AdAware and Spybot. Fix whatever they suggest. See if that stops it, it worked for others.

SpywareBlaster http://www.javacoolsoftware.com/spywareblaster.html
AdAware SE http://www.majorgeeks.com/download506.html
SpyBot S&D http://www.safer-networking.org/en/download/
 

1 more replies
Relevance 39.36%

For what ever reason my computer has went corrupt; I noticed this morning my comp. was off(I leave it in standby mode at night), so I check everything and come to find out it was the PSU (it was a Froton 400W), no problem I replaced it with the one in my Linux box.
But now as I boot up, I get these errors:
0x0000007E (0x80000004, 0xB81EF489,0xF7946B6c,0xF7946868)

mrxdav.sys-Address B81EF489, Base at B81E4000, DateStamp 41107b91

c000021a

stop: 0x000000A5 (0x00000011, 0x00000007, 0xF77970c0, 0x010000C)
Should i do a reinstall on the 80gig (i would lose over 62gigs), or take the 120gig from my linux and install windows on that (not worried about losing data)
And I also think that it MAY be my HD (though nothing appears to wrong with it), but I'm not sure b/c IF it gets to the boot screen and I go to logon, the screen goes black and I get the above errors. I have SP2 update, specs in sig.
 

Answer:Help with error messages

Did you google those errors? Could be a compatibility issue with the PSU, but I don't thik that is likely.
 

1 more replies
Relevance 39.36%
Question: Error Messages

please help me, everytime i log into my account on windows xp 5 different error messages come up when ive logged in. they each say a different error and there are 5 all together :
installhelper.exe
oscheck.exe
reader_sl.exe
ccapp.exe
cameraAssistant.exe
if you could tell me how to fix this and why it occurs please say and if you dont understand the question then do ask

Answer:Error Messages

Two of those are related to Logitech.
One is related to Adobe reader.
The other two relate to Symantec/Norton

Are you having any problems with those programs? Have you recently uninstalled one or more?

6 more replies
Relevance 39.36%
Question: error messages

Hi
Guys
i am getting the odd error messages but as i can see to no specific program or software just the odd random one , is there any site i can find out what they mean or can any of you assit with some info on the problem much appreciated!
Gringo !!

Answer:error messages

Can you post the dump files? Someone might be able to look through them to see what's causing the problem.

In the meantime have you tried the standard solutions?

1. Boot to LKG

2. Check memory

3. Check for overheating

4. Run SFC /scannow

5. Run System Restore

9 more replies
Relevance 39.36%

Hi I bought a IBM 600 from a carboot sale, it was originally owned by a large Company that doesn't exist anymore according to the label on the bottom. On start up I get the amount of ram shown then 161 and 163. It then goes to the password symbol which I think is the Power On Password, its a picture of a Monitor and computer under it. (its not the supervisor password which is a person symbol, or a hard disk password which is a cylinder symbol)When I press enter I get a circle with OK inside and a arrow, looks good so far.....but it then goes to a blue box with the error numbers bigger and the flying duck cursor (or curssed fly duck) with the option of OK or  Cancel. Either of which get me to another blue screen showing the manual. Thats as far as I can get.I have replaced the cmos battery.Turned it on holding the F1 key downTurned it on with the Password pads shorted outCleaned itDont know what to do next other than write off my money.Any hintsThanks

Answer:Error messages on 600

Can anyone put me out of my misery on this one???

7 more replies
Relevance 39.36%
Question: Error Messages

I have hp pavilioon a850y system with Windows XP. Right now I have 8 error messages on my computer but I am only going to to put 2 here for now. What can I do about these errors? Thanks for your help. I am only an intermediate user.

error 1:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_STACK_OVERFLOW (0xc00000fd) occurred at PC=0x7C90E8EE
Function=strchr+0xE1
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
Dynamic libraries:
0x00400000 - 0x0049C000 C:\Program Files\Internet Explorer\iexplore.exe
0x7C900000 - 0x7C9B2000 C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F6000 C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000 C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F02000 C:\WINDOWS\system32\RPCRT4.dll
0x77FE0000 - 0x77FF1000 C:\WINDOWS\system32\Secur32.dll
0x7E410000 - 0x7E4A1000 C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F59000 C:\WINDOWS\system32\GDI32.dll
0x77C10000 - 0x77C68000 C:\WINDOWS\system32\msvcrt.dll
0x77F60000 - 0x77FD6000 C:\WINDOWS\system32\SHLWAPI.dll
0x7C9C0000 - 0x7D1D7000 C:\WINDOWS\system32\SHELL32.dll
0x774E0000 - 0x7761D000 C:\WINDOWS\system32\ole32.dll
0x3DFD0000 - 0x3E1B8000 C:\WINDOWS\system32\iertutil.dll
0x78130000 - 0x78263000 C:\WINDOWS\system32\urlmon.dll
0x77120000 - 0x771AB000 C:\WINDOWS\system32\OLEAUT32.dll
0x5CB70000 - 0x5CB96000 C:\WINDOWS\system32\ShimEng.dll
0x71590000 - 0x71609000 C:\WINDOWS\AppPatch\AcLayers.DLL
0x769C0000 - 0x76A74000 C:\WINDOWS\sy... Read more

More replies
Relevance 39.36%
Question: Error Messages

I have a Linksys router and 2 wireless Linksys adaptor cards. The "wired" computer (the one with the router, adaptor card and cable modem) is an HP with Win XP. The wireless comp has a Win 98SE os. I continue to receive the following error message:
"There is a hardware conflict for IP address 192.168.1.101 with the system having hardware address 00:OF:66:6C:1B:IE" The "192" address I'm sure is me, the other is my wife's.
I have called Linksys tech support several times. They've attempted to come up with a solution, however I still get this message.
I've set-up the wireless network several times in an attempt to get this resolved, but still get this message. I tried running the hardware troubleshooter on my comp, but because one of Microsoft's "critical updates" messed that up, I can't even do that.
I've tried running various "troubleshooters" including Fix-It Utilities 6.0, but nothing shows up.
This is becoming increasingly annoying........
 

Answer:Error Messages

8 more replies
Relevance 39.36%
Question: Error Messages

Hi -

My b/f recently set up a second computer for me. The first computer uses Windows ME, the second Windows XP.

The 2nd computer works fine.

When I try view a webpage on the 1st one I get an error message "this page cannot be displayed". Someone told me to release and renew the IP. When I try to do this I get an error message "DHCP Server Unavailable: Renewing Adapter.

Any ideas?
 

Answer:Error Messages

How are the computers connected to the internet? Router, Hub, ICS
What kind of service? Cable, DSL, Dialup
 

2 more replies
Relevance 39.36%
Question: Error Messages

Aside from the numerous hang ups, repeting, skipping sounds (audio) and fatal exceptions (OE occured @28:c0071D8).
Also get XMS manager not present. Please help with these re-occuring error messages.
 

More replies
Relevance 39.36%

hello
i am a little new at all of this but i am needing assistance with someone that is maybe specialized in an area. i am working with winxp and i run windoc from systemworks and every other day i am getting many errors. i am also wondering if there is something fishy about an unknown user having access to a few programs or in the registry. that will help me. already have had wiped drive and re-installed a few times. thank you
justjesse2
 

Answer:[DUP] error messages

Hi.

Pleae don't post the same question twice.

I just reacted here: http://forums.techguy.org/showthread.php?s=&threadid=105260
 

1 more replies
Relevance 39.36%
Question: Error messages

Hi, just started getting this error message,different programs but always the same thingGDI.EXE in module unknown and it cripples pc i havce to reboot some times works sometimes not have run scans and checks but every thin seem ok so what the problem ? Dam annoyin lol.I also get white popup boxes come up and click ingnore or exit but dont matter what i click it lockes up.

Answer:Error messages

Any help? click here

10 more replies
Relevance 39.36%

After installing the full IE8, every time I try to add a bookmark I get this error Message: "Windows IE was unable to creat xxxx. Unspecified error."

And often when I open or close a web page I get this: "IE has stopped working. A problem caused the program to stop working properly. Windows will close the program and notify you if a solution is available." When I click of that message window the command works fine.

Does anyone have any idea what is going on here? Thanks!

Vista Home Premium 3

Answer:IE8 Error Messages????

There might be some issue with , internet explorer 8 installation ,so try to unistall and reinstall then internet explorer , and restart your computer , Try to check the same issue , i hope this will solve your issue

2 more replies
Relevance 39.36%

Can anyone please tell me what the two messages I get when starting xp are about. they are MKBDATA dat not found and MDATA dat not found. Haven't a clue what they mean.Thanks

More replies
Relevance 39.36%

Hi guys, I recently got a virus on my laptop i have removed the virus, at least i hope so. However when i start up my laptop i get errors when the desktop loads. Can anyone help me? Thanks in advance!

http://img191.imageshack.us/img191/6496/errorez.jpg

Here is a picture of the errors.

Answer:Need help getting rid of error messages

Go to Start, Run, type is msconfig and press enter. Go to the Startup tab, click disable all, then recheck your antivirus and then reboot.

1 more replies
Relevance 39.36%
Question: IE error messages

Lately out of nowhere ive been recieveing error messages when i close internet explorer. When i close it first i get an error report screen. If i either send the error report or dont send i get the following message. "An error has occured in Internet Explorer. Internet Explorer will now close. If you continue to experience problems please restart your computer." When i click on ok sometimes i recieve this message after that. "The instruction at "0x01e21f99" refrenced memory at 0x01e21f99". The memory could not be "read". Clock on ok to terminate the program" Now after this i restart my computer but for some reason that doesnt work either

Microsoft Windows XP Professional SP2
Intel(R)
Pentium(R) 4 CPU 2.66GHz
512 MB RAM
 

Answer:IE error messages

and don't double post. requesting that this thread be closed.
 

2 more replies
Relevance 39.36%

Hi,

I cannot use any functions on my computer (I am having to use my roommates comp. to even post this). I am getting an error message when I turn my computer on that appears every minute or so. It reads: Microsoft Feeds Synchronization has encountered a problem and needs to close. If you were in the middle of something the information you were working on may be lost. For more information about this error "click here". It also gives me the option to "debug" or "close". If I "click here"...it reads as follows:

Error Signature

AppName: msfeedssync.exe AppVer: 8.0.6001.18702 ModName: user32.dll
ModVer: 5.1.2600.5512 Offset: 000095c8

To view technical information about this error report, "click here"

If I "click here" it reads as follows:

Error Report Contents

The following information about your process will be reported:

Code: 0xc000005 Flags: 0x00000000
Record: 0x0000000000000000 Address: 0x000000007e4195c8

System Information
Windows NT 5.1 Build:2600
CPU Vendor Code: 756E6547-49656E69-6C65746E
CPU Version: 00000F12 CPU Feature Code: 3FKBFBFF
CPU AMD Feature Code: 00BDE824
Module 1
msfeedssync.exe
Image Base: 0x01000000 Image Size: 0x00000000
Checksum: 0x00009352 Time Stamp: 0x49b3aca8
Version Information
The following files will be included in this error report: C:\DOCUME~1\admin\LOCALS~1\Temp\202f_appcompat.txt

****Not sure if what I tell you next is why this may have happened or if thi... Read more

Answer:Several Error Messages

Start by looking in your Recycle bin for rarexe.dll. Reinstate it. If not try a System Restore prior to the date of deleting WINRAR. Now if all is OK don't use Add/Delete. Go to the WINRAR folder and use their uninstall.exe. If that works, Delete the WINRAR folder.

7 more replies
Relevance 39.36%
Question: Error messages

Can someone please tell me why I sometimes get the following error messages:Bad RequestThe browser sent a request that this server could not understandReference #7.167f7a5c.1234372719.0 orThe web page cannot be found Retype the address. Go back to the previous page. HTTP400There is one particular website where this happens the most but they could not help.

More replies
Relevance 39.36%
Question: error messages

I kept getting error messages so I carried out driver and software glitches on page 57 of latest PC advisor, I had to remove laod profile, c maudio and load powerprofile. This has stopped the error messages. What do I do next please?

Answer:error messages

fusion, the error messages I would have posted on here to see if anybody could help with them before loading any other software on. Now that the error messages have apparently gone, use your system as you did previously. If any error messages start coming again, post them on here. We should be able to help and guide you through any fixes you may require.

1 more replies
Relevance 39.36%
Question: Error messages.

Hi all. Am getting one error message = '404 ERROR' on a Packard Bell desktop running XP Home, This presents itself as soon as i try to send any attachments... Just now another error message appeared which follows: 'ERROR: You have an error in your SQL syntax. Check the manual that corresponds to your My SQL server version for the right syntax to use near 'ORDER BY add_date DESC limit 1' at line 1' .....Got me beat!!! HELP, Any ideas anyone.

More replies
Relevance 39.36%
Question: IE error messages

Lately out of nowhere ive been recieveing error messages when i close internet explorer. When i close it first i get an error report screen. If i either send the error report or dont send i get the following message. "An error has occured in Internet Explorer. Internet Explorer will now close. If you continue to experience problems please restart your computer." When i click on ok sometimes i recieve this message after that. "The instruction at "0x01e21f99" refrenced memory at 0x01e21f99". The memory could not be "read". Clock on ok to terminate the program" Now after this i restart my computer but for some reason that doesnt work either any suggestions?

Microsoft Windows XP Professional SP2
Intel(R)
Pentium(R) 4 CPU 2.66GHz
512 MB RAM
 

Answer:IE error messages

8 more replies
Relevance 39.36%
Question: Error Messages

Hi,

I recently tried to uninstall "TuneUp Utilities 2008" but halfway through the install I get the following error message (see web address below for screen shot of error message) and I can't uninstall the program. I have had this problem when trying to uninstall some other programs as well.

I have tried to reinstall windows installer but it said I was using service pack 3 so I had the latest version so I couldn't reinstall it?

Does any one know how I can resolve this?

Error message screen shot:-

 untitled.JPG   31.8KB
  31 downloads

Answer:Error Messages

Try booting into safe mode and try to uninstall the program, see if that works

Hope this helps,
Ttech

8 more replies
Relevance 39.36%
Question: error messages

i have 2 error messages at shutdown. one says ccApp. and the other is device 10 orlO notification window. what do these mean and how do i fix them thanks.
 

Answer:error messages

Hello
have you made any changes and could i have the exact error messages please
 

3 more replies
Relevance 39.36%
Relevance 39.36%

I've owned and used System Mechanic for about two years now, and I love the program. When I tried to run it last week, however, I noticed that I was getting 2 error messages that prevented the program from starting. The first one says:

"An invalid character was found in text content. Line: 6. Freed 488 kb of temporary wind."

When I click ok to this error, another one pops up, which says:

"Access violation at address 13546A78 in module 'SysMech.exe'. Read of address 00000078".

After I click ok to this, the loading bar for System Mechanic continues to move, but the program never loads.

Can anybody think of what might be wrong? I have not made any changes to my computer in the past week I have already tried uninstalling the program completely and then re-downloading it. I tried a system restore, which also didn't solve the issue.

Oh, and if you know of a solution, please explain how to do it with human words? I'm not really a computer expert, so please tell me each step in a way that I can do/find it. Thanks!

Answer:Error Messages, please help!

update: I downloaded a free registry cleaner tool to see if something in the registry was causing it. I ran the tool, but it didnt fix the errors.

1 more replies
Relevance 39.36%
Question: Error messages

Everytime I try to open Adobe Premiere or Windows Movie Maker and import a file I get a message that "windows has encountered a problem" and when I click "don't send" it completely closes the program. Does anybody know anything about this?
 

Answer:Error messages

next time it happens. click SEND. this sends an error report to Microsoft. If a fix is available. It will show you. Then post back and let us know what happens. If that fixes the problem, fine. If not, we will have to work on it.
 

1 more replies
Relevance 39.36%

My computer has been slower in the last few months and on occassion programs stop responding. I'm also getting error messages that I'd like some help with:

1) I can't defragment: whenever I try to defragment, I get this message "Disk Defragmenter has detected that Chkdsk is scheduled to run on the Volume:(C:) Please run Chkdsk /f."

2)I use Photoshop elements a lot and save a lot of my work in PSD file format which take up more space than jpg format. Yesterday when I was working and wanted to save something I got this message "Could not complete your request because there is not enough memory (RAM)"

I did a check on the Memory and this is what I found:-

I have a Dell XPS 600
Intel Pentium D 830 (3.0GHz) with Dual Core Technology

Avail. Physical Memory: 1.53GB Memory (RAM) 2048MB
Total Virtual Memory: 2GB
Avail Virtual Memory: 1.96GB
Page File Space: 3.85GB (total paging file size for all Drives: 2046MB)

When I go to My computer and check Properties I find:
Used Space: 167GB
Free Space: 65.5GB

I'd appreciate some help as I am not computer literate.

Answer:I need help with 2 Error Messages

Right click on the C drive in Explorer and go Properties > Tools > Check Now (under Error Checking). Check both boxes then click "Start Now". A message will pop up saying that Error Checking will run after you restart the computer. Restart the computer and Error Checking will run automatically after the restart. After it?s finished it will restart into Windows automatically.

4 more replies
Relevance 39.36%
Question: error messages

I was playing a game of football manager the other day when the game crashed out then the computer shutdown when it restarted very little is working I get error messages and dll errors when trying to open any applications related to windows I can get internet access through google chrome but not through internet explorer system restore will not complete because of it anyone any ideas whats wrong???

Answer:error messages

Hi -

Boot into recovery using your Vista DVD or the HDD recovery partition (most systems - press F10 during boot) and try system restore from there.

Regards. . .

jcgriff2

.

1 more replies
Relevance 39.36%
Question: XP Error Messages

I have a laptop used solely for word processing. On it I only have Office 20007 and a printer. On boot up I get told I have no firewall no AV and no windows udate. Is there any way I can stop this message appearing.? Thank you.

Answer:XP Error Messages

Open security center in control panel.Click on change theway security centre alerts me and remove the ticks from the boxes.

8 more replies
Relevance 39.36%

Hi,

Since trying to install a Digital PC Camera onto my Dell Dimension PC I have been receiving the following error messages which make my machine unusable.
Please advise, thank you.

Blue Screen

The main part that I managed to make a note it stated:

STOP: 0x0000008E (0xC0000005, 0x8058057B, 0xA94F576C, 0x00000000)

Blue Screen

STOP: c000021a {Fatal System Error}

The Windows Logon Process system process terminated unexpectedly with a stat f 0xc0000005 (0x00000000, 0x00000000)

The system has been shut down

Application Error Message

Wmiprvse.exe Application Error

The instruction at ?0x7c9113c0? referenced memory at 0x000000

The memory could not be ?written?

Click OK to terminate the program

Answer:Error messages, please help.

if you are connecting it with USB port then try connecting with another USB port on your dell. else you can also check by connecting your camera on a different PC and see if its giving the same error. if not you might be having a hardware issue.



______________________________________________
Before God we are all equally wise - and equally foolish!!

10 more replies
Relevance 39.36%
Question: error messages

receiving two errors - 1. "cli.exe application error The application failed to properly

(OxcOOOO135) and Microsoft Visual C++ runtime error Program C//WINDOWS\System

32\svchost. exe This application has requested the runtime to terminate it in an unusual way.

Please contact the application support team for more information". the second error message

freezes windows. please advise

Answer:error messages

Uninstall then reinstall your ati video card and see if that works.

6 more replies
Relevance 39.36%

Hi Guys,

I'm a bit stumped, being to trying to find a solution on the net to no arrival. None of the inbuilt windows fixers have been very helpful.

Error messages when updating are;
- 80070570
- 570
- 80070130

Frustrating as this computer is only 2 weeks old.

Answer:three error messages

What updates are giving you the error numbers?

They will have KB######.
Need each KB number for each error.

Mike

3 more replies
Relevance 39.36%

I moved from the UK a year to live in Spain. I had help in the UK if there was a problem with my PC, but not so here and now I keep getting error messages.

My PC is about 4 years old and I use Windows ME operating system.
I am no longer able to defrag my system, it just sits there doing nothing.
The 'restore system' doesn't work.

I use Sierra Print Artist 4.5 and when I come to print it just shows 'Stack System Overflow and switches the programme off'

Web pages keep popping up from nowhere, I don't know how to stop it.

There are many more niggling problems and if I may, I will contact you later about them.

But for now I am need of some help.

Thanks in advance
p.s. I am not that good with the technicalities of PC's
 

Answer:Error messages - Please help me

it sounds like you may have spyware ... dl spybot and adaware ... also you may want to consider upgrading from ME, cause it has so many bugs that microsoft no longer supports it and is likely to be the source of many of your computer troubles ... even 98SE is supported

also you may want to buy diskeeper or O&O defragger as the internal defragger isn;t very good
 

1 more replies
Relevance 39.36%
Relevance 39.36%
Question: Error Messages

I get the following message when I have to restart computer: Assert failed/Projects/wt Kernel/src/Win32/cm/core/ cmCodeModule.cp :90m_CodeHandle !=NULL.  After this, I get this message:  ddcmigrate.exe-Application.  The application failed to initialize properly 0x000003.  Click on OK to terminate the application.  Thank you for any help or suggestions.

Answer:Error Messages

Where does it appear?

14 more replies
Relevance 39.36%
Question: error messages

I cant see a screen when i click on internet.

Answer:error messages

Please elaborate . . does the screen go dark (like power loss), a blank or partial page loads, occurs always, sometimes, etc...

2 more replies
Relevance 39.36%
Question: Error messages

Referred from here: http://www.bleepingcomputer.com/forums/t/311587/internet-error-messages/ ~ OBHi, ok I started on this forum about a differnt topic but, my helpers felt that there are deeper problems that need to be fixed before those problems will go away. So, i was told to do steps 6-9 in the preparation guide and here are those resultsFirst, I downloaded the DeFogger program and the end of it I received this message:DeFrogger ran to completion, but one or more errors occured. See-defogger-disable.log for more details and here is the log:defogger_disable by jpshortstuff (23.02.10.1)Log created at 13:16 on 23/04/2010 (Administrator)Checking for autostart values...HKCU~Run values retrieved.Unable to open HKLM~Run key (5)HKLM~Run values retrieved.Checking for services/drivers...-=E.O.F=-Next I did the DDS Progam and that seem to go alright nothing did not seem to go wrong here are those results:I have to do it in another post because I get this error message when I am trying to open it up so I can post it.Notepad.Exe- Application errorThe application failed to intialize properly (0xc0000005). Click OK to terminateOk here is the log:DDS (Ver_10-03-17.01) - NTFSx86 Run by Administrator at 13:23:39.27 on Fri 04/23/2010Internet Explorer: 6.0.2800.1106Microsoft Windows XP Professional 5.1.2600.1.1252.1.1033.18.191.52 [GMT -4:00]============== Running Processes ===============C:WINDOWSsystem32svchost -k rpcssC:WINDOWSSystem32svchost.exe -k netsvcssvchost.exesvchost.exeC:WINDO... Read more

Answer:Error messages

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you let... Read more

50 more replies
Relevance 39.36%
Question: error messages

Hi (windows xp)
I have recently had to have a new heatsink put in my computor, i lost some of my programmes, and had to have them reinstalled.....anyway all was ok, i reinstalled avg anti virus, and csw shreeder and they are both up dated, I keep getting mircrosoft error messages in grey boxes, loads of them, i know they are trying to get me to download loads of stuff i don't need, so i have been ignoring them.....how can i get rid of them, they are most annoying, any help would be great, before i chuck it out the window.....cheers sweets
 

Answer:error messages

9 more replies
Relevance 39.36%

Hey,
So my computer has been experiencing some difficulties. I've been getting error messages like 'unterminated string constant' or 'expected error' and such and I have no idea what to do about it! Not very computer savy so I would appreciate any feedback

More replies
Relevance 39.36%

HELP!!!!!!!!!!!
my computer is incredibly screwed up! Nothing works,and it takes forever to load. here are some of the errors I get.
I get this trying to open My Computer.
-----
EXPLORER.EXE-Application Error
The instruction at "0x1000a387" referenced memory at "0x10019008". The required data was not placed into memory because of an I/O error status of "0xc000009c".
Click on ok to terminate...
-----
Randomly, I get an error message about DrWatson. I got the error signature for this one.
-----
EventType:Bex P1:drwatsn32.exe P2:5.1.2600.0 P3:3b7d84a2 P4:dbghelp.dll P5:5.1.2600.2180 P6:4110969a P7:0001295d P8:c0000409 P9:00000000
-----
I get errors opening any folder. their error signature goes like this.
-----
Generic Host process for Win32 services
EventType:In page error P1:c000009c P2:00000003
-----
When I click on Norton, I get this message.
-----
Symantec
Unable to start the Integrator. Please reboot and try again.
1007,157
-----
What could be wrong?

Answer:Many Error Messages, please help!!!

safe mode?

9 more replies
Relevance 39.36%

In continuation of several problems I've experienced recently, my computer restarted this morning without warning, while I was online, and then a message appeared, which I've had before: "system has recovered from a serious error" - this error was translated in the log as follows:BCCode : 4e BCP1 : 00000099 : BCP2 :000300062 BCP3 :00000007 BCP4 :0000000 OSVer :5_1_2600 SP : 2_0PRODUCT : 768_1I have no idea where to get info as to what this means, or what to do to prevent - grateful for any enlightenment

Answer:serious error messages

Which operating system are you using? Also which browser (Internet Explorer?) Can you give a little more detail about the several other problems - are they related?

2 more replies
Relevance 39.36%
Question: error messages

When turning PC off last night the following messages appeared:
Iexplore has caused an error in MSHTML.DLL.
Iexplore will now close

and:

Ccapp has caused an error in NAVAPW32.DLL.
Ccapp will now close.

After clicking Ok on each Pc shut down Ok.
Any ideas why they came up?
 

Answer:error messages

I would check your machine for spyware in regards to IE crashing.

As for the second error, thats Norton Antivirus crashing in itself, no idea why though.
 

5 more replies
Relevance 39.36%
Question: error messages

Hi..i really need help. I keep getting these two error messages
windows\system32\msiefr40.dll and
windows\system32\inetp60.dll
My computer freezes all the time, and the internet explorer doesnt work well anymore. i have ran that hijack this and i think this is the log. Sorry i really am computer stupid about fixing problems. I would really like so help. Thank you...Chrissy

LimeWire version 4.8.1

Java version 1.4.2_06 from Sun Microsystems Inc.

Windows XP v. 5.1 on x86

Free/total memory: 3865320/4128768

com.limegroup.gnutella.gui.GUILoader$StartupFailedException: invalid xml.war

at com.limegroup.gnutella.gui.GUILoader.sanityCheck(GUILoader.java:283)

at com.limegroup.gnutella.gui.GUILoader.load(GUILoader.java:43)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at com.limegroup.gnutella.gui.Main.main(Main.java:31)

STARTUP ERROR!

-- listing properties --

FILTER_HASH_QUERIES=true

APP_HEIGHT=560

FILTER_WHATS_NEW_ADULT=false

FRACTIONAL_UPTIME=1.5451884E-4

LAST_EXPIRE_TIME=1119099302939

SESSIONS=11

DIRECTORY_FOR_SAVING_FILES=C:\Documents and Settings\Chris\Shared

RUN_ONCE=true

COUNTRY=

CLIENT_ID=2B98E7B47E73695EFFBA995DDB2C4000

LAST_SHUTDOWN_TIME=1111294767203

MAX_UPLOAD_BYTES_PER_SEC=28

DAAP_ENABLED=false

TOTAL_UPTIME=1438138

AVERAGE_UPTIME=130739

UNSET_... Read more

Answer:error messages

Get ALL of these

SpywareBlaster 3.4 http://majorgeeks.com/download2859.html
SpyBot V1.4 http://www.majorgeeks.com/download2471.html
AdAware SE 1.06 http://www.majorgeeks.com/download506.html
MS AntiSpy - http://www.microsoft.com/downloads/...A8BD-DBF62EDA9671&displaylang=en&Hash=RDXMHB6 (XP and W2K only)

DL them (they are free), install them, check each for their
definition updates and then run AdAware, MS Anti and Spybot, fixing anything
they say.

In SpywareBlaster - Always enable all protection after updates
In SpyBot - After an update run immunize
You have no active AV!

Do a couple online scans from this list (Post #1)

http://forums.techguy.org/t110854.html
Then get the free AVG 7 install it, check for updates and run a full scan

AVG 7 - http://free.grisoft.com/freeweb.php/doc/2/

Or Avast

http://www.avast.com/eng/down_home.html
Add remove programs remove lime wire the source of your infections

Download the trial version of Ewido Security Suite http://www.ewido.net/en/download/
Install ewido.
During the installation, under "Additional Options" uncheck "Install background guard" and "Install scan via context menu".
Launch ewido
It will prompt you to update click the OK button and it will go to the main screen
On the left side of the main screen click update
Click on Start and let it update.
DO NOT run a scan yet. You will do that later in safe mode.

Restart your computer into safe mode now. Pe... Read more

1 more replies
Relevance 39.36%

Hi guys,
My PC has been showing the following error messages in the event viewer;
a) 372: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)

b) The COM+ Event System could not remove the EventSystem.EventSubscription object {CEB8B221-89C5-41A8-98CE-79B413BF150B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The HRESULT was 80070005.

c) I have an internet connection with which I'm browsing the internet now but there is no internet icon showing on the 2-pc at the right hand of the base task-bar.

Any help pls.

Kelvin.

Answer:Error Messages, Pls help!

Hi Mr Kelvin, welcome to vista forums, I thought this may help you,patch41.
PRB: Run-Time Error 372 Occurs with the ImageList Control in Microsoft Visual Basic 6.0

1 more replies
Relevance 39.36%
Question: Error messages

When trying to download and install some updates, internet explorer 8 and flash player get the following messageInternet explorer cannot download ie8-windowsxp-x86-env.exe from download microsoft.com  was unable to open this siteC:/documents and settings\ed favorites  access denied pops up whenever you change sites onlineis there anyway to fix this?

Answer:Error messages

 ???hmmm,The hard and fast way i find of sorting this issue is to fo into control panel, add and remove programs, uninstall IE8 'thus rolling it back to 7 or 6' and then reinstalling 8 from the microsoft IE8 website.This is not my preffered method of solving these issues as you don't get to the root cause, but if time is an issue then it generally sorts out the problem.

9 more replies
Relevance 39.36%
Question: error messages

I am trying to load a game for my kids Crayola paint n play pony. When I first loaded it I got the message not enough 3mb virtual memory, but I fixed that. Now I can only get into part of the game. When I try to open other things in the game I get all these messages:
Cast member not found
Sound not defined
Handler not defined #fill
Script error Sprite member wrong

There is sound when I use the part of the game that works.

Please help.
Kristin
 

Answer:error messages

Correct me if I am wrong but this looks like an older game, from what I see it is a windows 95 game (see link), and I am going to assume you are running Windows XP

http://www.superkids.com/aweb/pages/reviews/girls/4/pony/merge.shtml

If you do have XP, try running it in Compatibility mode....
Right click on the game's Icon, click properties, click Compatibility and then check off compatibility and choose Windows 95. Click OK and try running the game.... this doesn't always work but it is worth a shot.

* also try creating a shortcut from the Setup.exe file on the CD and do the same as above and then re-install
If you have another PC with windows 98 you can try it on there, it should work.
 

2 more replies
Relevance 39.36%
Question: Error Messages

last night I was checking for updates for my pc and it said upgrade to XP service pack 3. So I let it update and reset my pc. when I logged back on I got this message

http://img.photobucket.com/albums/v486/Gogetafan2/error.jpg.

Then when I click OK I get a second error message

http://img.photobucket.com/albums/v486/Gogetafan2/error2.jpg
 

Answer:Error Messages

"The procedure entry point apsSearchInterface could not be located in the dynamic link library wlanapi.dll"

See this post, do you have a D-Link network adapter, look here and update your driver.

http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3351393&SiteID=17

http://support.microsoft.com/kb/950720
 

5 more replies