Computer Support Forum

Internet works fine still cannot connect

Question: Internet works fine still cannot connect

I have an annoying issue with my internet connection. From time to time i can't connect to Steam, Battle.net or download from torrents (I'm mentioning torrents becuase there might be a connection). I share the internet with 10 other people all of them connected mostly via wi-fi. Is is possible that the connection is too low to connect to the already mentioned above servers? There is nothing wrong with my pc or internet settings because it works fine for a week and then all of a sudden not. Once we tried to hard reset the main router and after that it worked just fine.
Realy don't know what might be the reason and I would love to finally find out what's causing it.
The router is http://www.planet.com.tw/en/product/...t.php?id=34631
The modem is provided by austrian telecom company and is this one Pirelli PRG AV4202N

Thank you all for any help.

Relevance 100%
Preferred Solution: Internet works fine still cannot connect

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Internet works fine still cannot connect

It is possible that it could be a network congestion. Does your computer wireless adapter display any diagnostic as to why the connection was lost?

2 more replies
Relevance 85.28%

Firefox works as usual.
Network Magic shows a good connection; the internet speed test gives normal readings.
However, IE 7 will not connect. I get the message "Internet Explorer cannot display the webpage". Also, Microsoft Update cannot connect. I have tried the following:
- rebooted many times
- reinstalled IE 7
- repaired & reset WinSock
I don't really care about IE, but not being able to update Windows is a problem.
Any suggestions will be appreciated.
 

Answer:FireFox works fine; IE7 cannot connect to internet

Open IE. Go to File and make sure Work Offline is not checked.
 

5 more replies
Relevance 85.28%

Firefox works as usual.
Network Magic shows a good connection; the internet speed test gives normal readings.
However, IE 7 will not connect. I get the message "Internet Explorer cannot display the webpage". Also, Microsoft Update cannot connect. I have tried the following:
- rebooted many times
- reinstalled IE 7
- repaired & reset WinSock
I don't really care about IE, but not being able to update Windows is a problem.
Any suggestions will be appreciated.

Windows XP Pro SP3
 

Answer:IE can't connect to internet; Firefox works fine

See if THIS is of any help
 

2 more replies
Relevance 85.28%

Trying to connect to internet using IE9 says no internet connect detected, but chrome works fine. I'm running Windows Vista. Also trying to download AT&T U-verse McAfee but no internet connection detected or McAfee server not available. I also have Norton loaded.
 

Answer:IE9 won't connect to internet but Chrome works fine

some things to try, disable all installed addons and toolbars to see if one is causing the problem. go to advance options in settings and return ie to default, go into safemode with network to see if you can get online.
 

1 more replies
Relevance 84.46%

ive been using the same setup for months, my laptop connects to our wireless network, its been perfect, our ipads connect to it too, theres never been a problem, then last night out of the blue it just stopped working, all the devices and my laptop can still connect to the network just fine and they can browse the net and ask questions on forums (), but they cant connect to game servers, my daughter cant play godus on her ipad, my son cant connect to minecraft, i cant connect to world of warcraft.

I did have a message pop up briefly on my laptop that there was an IP conflict and i thought that might have been something to do with it, i tried everything i could to get a new IP address, i did the ipconfig /release /renew thing, i tried leaving the modem and router cables out all night so i'd get a new one from my ISP but none of these actually worked, after checking i can see that i still have the same IP address.

But it still didnt make sense to me because its not only my laptop that cant connect to games, the other laptop and the ipads are also having the same problem. I googled for hours, trying various things, the main one i kept seeing was port forwarding, even though i had never needed to do that before i figured i'd give it a go and tried to open up wow's ports first. I found the list of ports to open on blizzards website and went to work opening them all up, but i am still unable to connect to battlenet/WoW

I also tried resetting my router back to factory se... Read more

Answer:Cant connect to game servers, but internet works fine

netsh int tcp set heuristics wsh=disabled
netsh int tcp set global ecncapability=disabled

2 more replies
Relevance 84.46%

So the the past couple of weeks, i noticed this weird problem that ive be unable to solve. I can connect the the internet, be it my homes or a cafe place just fine. My chrome runs fine and i can watch youtube and surf the web. But when i try to login on to steam, origin, skype, or any log in service, i get a error stating that It can't connect to the network. I've checked my firewall to make sure that their all allow through it. Im baffled   on what the problem would be since its only affecting on part of my internet connection. Thanks in advance.

Answer:Internet works fine, but can't connect to services like skype etc.

Can you post this error message?

48 more replies
Relevance 84.46%

So the the past couple of weeks, i noticed this weird problem that ive be unable to solve. I can connect the the internet, be it my homes or a cafe place just fine. My chrome runs fine and i can watch youtube and surf the web. But when i try to login on to steam, origin, skype, or any log in service, i get a error stating that It can't connect to the network. I've checked my firewall to make sure that their all allow through it. Im baffled   on what the problem would be since its only affecting on part of my internet connection. Thanks in advance.

Answer:Internet works fine, but can't connect to services like skype etc.

Can you post this error message?

48 more replies
Relevance 84.46%

I have tried multiple solutions and can not access the Internet from my desktop - my laptop works fine through the wireless router ... I am running a full system scan through Avast to see if there are any viruses, other than this I am not sure what to do but my Dell is now a rather expensive paper weight if I can't access the Internet (Edit 9:55 AM - according to Avast I have no viruses on the computer, HELP!)
 

Answer:HELP Can not connect desktop to Internet, laptop works fine

7 more replies
Relevance 83.23%

A few days ago my desktop booted up very slowly and I was not able to connect to any webpages or any programs which use the internet. I just left it to sit for a few days and tried to boot it up again today, it still booted rediculously slow (took about 10 minutes) but it's still not working so I figured I'd register here and ask for some help. The router which I have connected to my desktop's modem is used to give internet to my laptop is still working fine (I'm posting this from my laptop). I've tried to do a system restore on my desktop, but the restores get an error and don't work. Also when i do the system restores, my desktop icons wont load so i have to end the explorer.exe process and then run the process again, after which all the icons show. (this only happens after I system restore). Another thing that is weird is that I can still connect to AIM (the instant messanger) on my desktop, but nothing else. Not sure what to do at this point, hopefully you guys can help.
 

Answer:Desktop won't connect to internet, laptop using router works fine.

12 more replies
Relevance 83.23%

My desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network').

Here is a list of what I have done so far to try and resolve the issue:

1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.

Here is what comes up with ipconfig/all:

C:\Users\Paul>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . .... Read more

Answer:Unable to connect to modem/internet via lan but wireless works fine

if it helps, here is the ipconfig/all for the laptop that is working on the same modem:

C:\Users\Triple P>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : TripleP-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 00-1E-37-B9-EC-37
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8101E Family PCI-E Fast Ethern
et NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-1E-68-2A-28-99
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-1A-73-FE-61-DB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::dd07:1c93:ce1c:88d4%11(Prefer... Read more

9 more replies
Relevance 83.23%

Got a weird situation with a compaq desktop. I upgraded the system memory to 1.2gb for a woman. She took the unit home, everything works fine, except she can't connect to internet. I got the unit back, and it connected to the network fine. The desktop still can't connect to the internet even after I did a complete system restore. Comcast agreed to replace her modem with a new one, and her friend's laptop can connect to the internet fine. She told me that the network connection showed connected, just when using IE, she got no server error. I tried the desktop with my network connection and I can surf the net with IE. Right now I told her to bring the desktop to her friend's house and try it there. If that still doesn't work, I'm out of idea. Any suggestions?
 

Answer:Can't connect to internet at home, but works fine in tech shop

Only thing that comes to mind is a DHCP issue involving a MAC filter on the router...

Is she getting a proper IP address and not an APIPA?
 

4 more replies
Relevance 77.08%

Probably this is something simple in IE7 options/settings but I failed to figure it out.

This is happening on my desktop (am writing this on my laptop). It's failing to connect, with the exception being "secure" sites - https://....

Email is working fine.

Thanks
LSPSWR

PS this happened after we did Microsoft livecare free scan and implemented corrective actions (malware/virus deletions); it then prompted us to reboot, then indicated new Windows updates to install, and then it prompted us to re-install IE7
 

Answer:Solved: IE7 fails to connect to sites with http, works in https; email works fine

16 more replies
Relevance 75.85%

I have searched for this problem and can't find it anywhere. Every few minutes my IBM Access Connections keeps shutting down, then restarting all by itself. I usually don't have to do anything to restart it, but once in a while it takes too long to restart, so I reconnect manually. I don't know if it makes any difference, but it didn't happen until I downloaded Google Chrome. I've installed Service Pack 3, but no change. And while I'm at it, my laptop will no longer restart when I click "restart". It just powers off. Anyhelp would be appreciated. My computer model:R51 2883-ARU Message Edited by jnwest on 09-07-2008 12:52 PMMessage Edited by jnwest on 09-07-2008 12:52 PMMessage Edited by jnwest on 09-07-2008 12:53 PM













Solved!

Go to Solution.

Answer:R51 Wireless keeps turning off and back on. Internet signal fine - 2nd computer works fine.

Hello, thatīs a strange behavoir. It seems that google chrome had problems with AC and interferred with it.I would suggest uninstall and then install google chrome. See if AC is functioning as designed when google is uninstalled. Or try to download the newest verson of AC from driver page of Lenovo.Look at the link supports&downloads, on the very top of this page! greetsAndreas    

2 more replies
Relevance 71.34%

I have two computers, one in my playroom and one in my room. I recently used a systems recovery disc on my computer and erased everything. But now i have no internet, but the internet on the playroom computer works fine.

I'm not really good with computers but i have a linksys modem from comcast and has an ethernet cable hooked up to the computer in the playroom to my computer in my room and it says that the modem is disconnected.

anyone know how to get my internet back on my computer? =\

using windows xp on both computers
 

Answer:Modem works fine but can't connect?

14 more replies
Relevance 71.34%

Hi All and Merry Christmas!

I've been all over the help boards and MS troubleshooting, but I haven't found anything that addresses this particular issue.

I can connect to the internet fine via Firefox, but when I try via IE7 I get:
"Failed to connect to web-server/proxy-server for bypass transaction (Error 504)". (Sometimes I get a more friendly error page, but of no more help than this.)

I'm on a Dell desktop running Windows XP SP3 and connect via HughesNet satellite. I believe the problem started after my helpdesk at work talked me through setting up VPN connection. VPN worked fine however, which makes this problem odder because work doesn't support Firefox. In any case, I uninstalled VPN. I've also tried connecting in SafeMode - no dice. None of the other suggestions I've seen online have helped either - but I think all of them assume you can't connect to the internet at all.

One thing I've noticed - when I look at my Network Connection settings there are two of them: Local Area Connection and Local Area Connection 2. The first one says "Network cable unplugged" (which of course it isn't or I wouldn't be typing here now), and the other says "Connected." They have different device names as well, the first Intel (R) Pro 1000... and the second one (that works) 3Com EtherLink XL...

Maybe Firefox is using the second one, and IE is trying to use the first one, but I don't... Read more

Answer:Can't connect via IE7, but Firefox works fine

Might be Conficker Worm Virus

Have you checked for the Conficker work virus? I had a customer recently had this problem. IE didn't work but FF did and there were some other issues. The ISP had contacted the customer to say they believed his home network was infected with Conficker and needed to be removed or they were doing to cut him off. So he called me, I checked and yes, it was Conficker.

Here is the link for the company that makes a removal tool for Conficker:

http://www.enigmasoftware.com/

-- Andy
 

5 more replies
Relevance 70.52%

I have three desktop computers here (two with XP, one with 2000) One of the XP machines had a whack of spyware and viruses (which I'm currenty trying to deal with in another thread). It hasn't been able to connect to the network for a couple days. This morning, my main PC was fine. As of now, none of the windows machines will connect to the internet, yet my little Mac here is working perfectly. Can I assume I have a network virus?

This is the other thread that has my hijack this logs and some more explanation of what I've done already, in case it's helpful at all.

Thanks!!
 

Answer:Home network - pcs cannot connect, Mac works fine

Macs don't tend to be bothered by most viruses, as they are mostly written to mess with Windows machines. Sounds like whatever got your first machine got the other windows machine also.
 

1 more replies
Relevance 70.52%

I've been using Outlook Express for a long time. Recently it's been unable to connect to my incoming mail server about one in five times, but before it couldn't do it at all. However, it pretty much never is able to make a connection with my outgoing mail server. My webmail works just fine, so it isn't their servers. Nothing had been changed when the problem started or since then. I've looked over and over my account configurations and they all look good. I've even made a new account and it's the same problem. Does anyone have an idea as to what might be wrong?
The error I get when trying to send mail is as follows:

The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was '(the person's address)@aol.com'. Subject 'Re: Stuff', Account: 'PatMedia servers', Server: 'smtp.patmedia.net', Protocol: SMTP, Server Response: '554 <(the person's address)@aol.com>: Recipient address rejected: Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79
 

Answer:OE rarely is able to connect, though webmail works fine.

9 more replies
Relevance 70.52%

Hi all, first time posting here and hoping someone can help me out!

As the title implies, I am having trouble connecting to the internet, but not my network, when I assign a static IP to my machine. However, when it's set to DHCP, it works just fine.

Pertinent info:
-I'm connecting to a Linksys WRT610N router via a wireless USB adaptor, Netgear WNDA3100v2;
-Service is Time Warner Roadrunner cable;
-There is no IP conflict as I've got DHCP range set from .200-.249 and this machine's static is .100;
-All the other devices in the house are on static starting with .101 up and they all work fine, both wired and wirelessly;
-Can see and connect to all devices in the LAN, including the router, but nothing outside

Any suggestions would be greatly appreciated... thanks!
 

Answer:Can't connect via static IP but works fine via DHCP...

7 more replies
Relevance 70.52%

Both Google Chrome, and FireFox connect fine, but nearly everything won't connect.


Skype can't connect.
Steam can't connect.
League of Legends can't connect.
Join.Me can't connect.
Etc...

But my browser works fine? (Just noticed, apparently my VPN can connect.)

My immediate reaction was to scan for viruses, scan'd with TDSSKiller- Nothing.

So I ran MSCONFIG, and disabled all start up programs, and restarted. Still won't connect.

Then I noticed their was a update on my windows update (which still connects to the internet), and there was a new service pack available, so hoping that would fix it, I installed it, restarted my computer, etc.., and still won't connect.

MalwareBytes didn't find anything serious.

Firewalls are disabled.

Never had this problem before today.

Btw, I don't have System Restore enabled.

I am on Windows 7.

Answer:Browser Works Fine, Other Programs Can't Connect

Hi, you say "Firewalls are disabled" do you mean you have more then one?

2 more replies
Relevance 70.52%

I dont remember this much trouble before.

I have been connected via wireless due to i needed the lan for another comp.

It has been hooked up to lan before.

The other comp isn't using the lan so i went to plug in my old vista.


Now it wont get on the internet.

It can see the other computers connected but it can't network to them....it can just see them.

The lan is enabled. But it says limited access if that means anything.

In order to use the internet i must use my wireless.

My Vista has never failed to fail yet

Any suggestions would be appreciated.

Answer:Here is a new one wireless works fine will lan wont connect

you got teamviewer? I have an idea but I dont know how to explain it

5 more replies
Relevance 70.11%

Sow yesterday I started up my laptop as usual and tried to play some league of legends...When trying to open the game I got a error "RAD error-cant connect to http server" after that I tried a dns fix(changing to google dns)it didn't fix sow I went to play some CS:GO,when I was in the lobby with my friends I didn't get the message to accept a match and I got the error "failed to accept the match" after that I tried to play unturned and when I went to try find a server list there was no servers ... tried to connect via IP address (not lan server) still couldn't.
Can someone help me out,I cant figure out what the problem is.
And how could I fix it?


Sorry for my bad english,I am not sure in witch board to post this and thanks to whom replied to the thread.

More replies
Relevance 70.11%

Have an Asus ultrabook laptop with an Atheros 9485WB-EB wifi/BT adapter. When I'm away from home, it works perfectly. At home, it sees our home network but refuses to connect to it - just get a cannot connect error.

It used to work fine, and then it's gradually gotten worse. At first rebooting the laptop would make it work for a while, then that quit working. Now it's just non-fuctional at home.

Home wifi works fine with other devices as well, and if I plug a USB wifi adapter into the laptop that works too.

Home router is (I forget the model, have to look when I get home) running dd-wrt. Rebooting the router doesn't fix the problem.

Any idea what would make it quit? No setting have been changed on the router during all this.
 

More replies
Relevance 70.11%

I bought a Belkin G Wireless Router about 8 months back.

Starting a few weeks ago, I've had to set a static IP address to my recently built computer (sitting at 192.168.2.10 right now) for it to not disconnect every few minutes.

I then noticed that no wireless devices (tested with 2 Laptops and Ipod Touch) could connect. If I restarted the router and did NOT connect anything to it, it would connect with local access only. If I attempt to set the router up using the CD that came with the packaging, it claims it cannot connect to the internet, and then proceeds to actually kick me off the net.

Does anyone have any clue what coulda caused this?

As far as I know, I've not changed anything.
 

Answer:Cannot connect to Wireless, but wired works fine, with kinks

Which OS? Is the NIC adapter (USB, PCI, PC-Card Bus, miniPCI (onboard))
 

3 more replies
Relevance 70.11%

Hello, I've been having this issue recently. On my laptop, the wifi works fine, and then a little while later, it can't connect at all (it looks like it's connected, then disconnects, and then tries connect again, etc). All the other devices connected to the router is fine, only mine is the problem. I tried looking at device manager, the Intel Centrino Advanced-N 6235 is enabled, updated, and in the properties, it says that the device is working properly.

The problem does go away temporarily when I turn off the router, wait a little, and then turn it back on, but soon afterwards, I continue to have connecting issues.

Here's the info

1. Is this a wired or wireless connection issue?
Wireless

2. Who is your Internet Service Provider (ISP)?
Verizon

3. What type of Broadband connection are you using?
Fios

4. What is the exact Make and Model of your Modem, Router or Modem/Router Combo - Linksys, D-Link, Netgear, TP-LINK, etc.
Router: Actiontec? Not totally sure

5. What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic
Avast
6. Ipconfig /all
Windows IP Configuration

Host Name . . . . . . . . . . . . : User-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Wireless LAN adapter Wireless Network Connection:

Connection-... Read more

Answer:Wifi issues. It works fine then all of a sudden can't connect.

Welcome to Seven Forums,

Thanks for using the basic requirements, all info provided were very helpful. Your Xirrus capture looks good, no issue there, however, I see that in your wireless connection you're using Public DNS, why not change the DNS'es to auto same as your LAN DNS Servers . . . . . . . . . . . : 192.168.1.1. You'll have to click on Obtain DNS address automatically....Please follow this Tutorial.
http://windows.microsoft.com/en-us/w...cp-ip-settings

Also, it's best to use WPA2 with AES encryption for a better secured network, you're currently using WEP.

5 more replies
Relevance 70.11%

I have recently bought a router, the Fritz.Box Home Server 1&1 VDSL. I have set it up via wifi and can connect to the internet without a problem.
However, I would like to connect my PC to the router via LAN.
When I put the LAN cable into my PC and the router, both my PC and my router react and tell me there is a connection but they do not recognize each other. The router says there is something in LAN1 and the PC says there is a LAN cable without a connection. I cannot access the router via LAN, only via wifi.
My PC uses the Killer Network 2200e driver, I tried removing it and then manually adding it again, it did not work. My IPv4 settings seem fine, too, I have no idea what to do now.

More replies
Relevance 70.11%

I have recently bought a router, the Fritz.Box Home Server 1&1 VDSL. I have set it up via wifi and can connect to the internet without a problem.
However, I would like to connect my PC to the router via LAN.
When I put the LAN cable into my PC and the router, both my PC and my router react and tell me there is a connection but they do not recognize each other. The router says there is something in LAN1 and the PC says there is a LAN cable without a connection. I cannot access the router via LAN, only via wifi.
My PC uses the Killer Network 2200e driver, I tried removing it and then manually adding it again, it did not work. My IPv4 settings seem fine, too, I have no idea what to do now.

Answer:Ethernet won't connect to router, wifi works fine

and welcome to the Forum

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then: check your browser's settings, remove any proxy settings if found, here's how


Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type or copy and paste the following command:

ipconfig/all > 0 & notepad 0

and press enter.

Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

2 more replies
Relevance 69.7%

I just bought this laptop about 10 days ago to use specifically for a writing project separate from my other work laptop. It has Windows 7. It had Google Chrome installed (or maybe my brother installed it upon taking it out of the box.) I have
used IE as my browser on this laptop once or twice, but mostly use Google Chrome. I downloaded some genealogy software I just bought today about an hour or so ago (Family Tree Maker 2012) and noticed that it would not connect to the internet to register- it
kept saying "No internet connection". After trying a few things (allowing the program access through Windows Firewall, checking to make sure that "proxy server" tab was not checked in Internet Settings, disabling some Bing Maps and Windows
Live email accelerators) and finally tried closing Chrome and opening IE to run in background instead. However, IE won't connect - keeps saying "Cant display webpage" although I am definitely connected to internet via wifi. I tried resetting Internet
Explorer...no dice. I've restarted several times. Nothing is working. Any suggestions?
My husband thinks i should uninstall Chrome, which he guesses is causing all the trouble with both IE and the Family Tree software. But I'm afraid that if I uninstall Chrome and it doesnt work, i wont be able to get back on the internet since I can presently
only do so through Chrome.
I dont have a whole lot of experience troubleshooting computers, so please be spec... Read more

Answer:IE won't connect to internet, but Chrome is working fine. Other software wont connect to internet either.

Uninstalling Chrome should not be nessesary it does have an agressive default install which should not be used but uninstalling will not fix any issues because chromes uninstall will not change
setting back the way they were before you installed it/ or who ever.
Reset ie9 manually,
Click the Start button on the Taskbar,
Click on Control panel,
Click on Internet options,
Go to the Advanced section,
Click on Reset button on the bottom,
Check the box to Delete personal settings,
Use the recommended setup and install options.
Also see this,
http://support.microsoft.com/kb/972034
New computers come with pre-installed security suites/ Trial versions,
The best thing to do with these trial versions is to Uninstall them,
http://service.mcafee.com/FAQDocument.aspx?id=TS101331
http://community.norton.com/t5/Norton-360/norton-360-uninstall/td-p/639381
Use these instead,
Freebie from microsoft,
http://windows.microsoft.com/en-US/windows/products/security-essentials
If money isn't an issue add the full pro version of malwarebytes, less than mcafee or norton,

http://www.malwarebytes.org/products/malwarebytes_free
Then use the free version of this as well for even more ways to clean your machine,
http://www.superantispyware.com/?tag=SUPERANTISPYWARE

6 more replies
Relevance 69.29%

A few other people have posted similar problems but nowhere did I see an answer so I thought I would post.

Using Windows 10 64bit. It is updated completely. (Not the Insider build).

Just bought a HP Officejet 3620. Downloaded the most recent driver and print/scan software from HP's support website and installed according to their instructions. I am connected via USB, using the USB cable HP provided to a USB 2 port (not a hub).

Print function works fine, right off of the bat.

The Device Manager and the Devices and Printers both show the printer working properly and say there are no newer drivers. They also recognize it is a printer and scanner.

When I try to scan it says that the scanner is not connected, it cannot communicate with the device. This happens when I use the HP Scan utility and when I use Windows Fax and Scan, and it happens both when I set it to scan the scan surface or the document feeder. If I use the interface on the scanner itself when I choose the scan to computer option it shows my computer listed, but then when I try to start the scan it gives the same error, that it cannot connect. Similarly when I try to scan from within Adobe Acrobat it says it cannot connect to any scanner.

I have run HP Printer and Scanner Doctor, and it fails. It gets to the "Driver Check" section and says it cannot communicate with the device, that I should unplug the power cord, then plug it back in, and then restart Windows. I do this and the app starts back up and... Read more

Answer:HP Officejet 3620 Scanner won't connect, Printer works fine

Update:

I tried total removal of HP software and drivers, and allowing Windows to use its own drivers instead, and same results. I tried this on two machines, both Win10x64, though had the most recent updates and one had been offline and is about 2 weeks behind in updates, but it didn't matter.

I then tried the advice on some of the HP forum pages about this issue, not with this model printer but the same issue. There were two flavors of the same process, which basically involved using various utilities to wipe everything HP from system and reinstalling the software, and no dice. Same result.

No one else has any ideas?

Any thought about whether this might be something that will come in a Windows update so I should just wait a bit since using the scanner is not urgent right now? Clearly HP scanners and Win 10 are not getting along, I am not the only one experiencing problems nor is this the only model... but that doesn't always mean that they're working to fix it...

17 more replies
Relevance 68.47%

My 2 year old Lenovo Ideapad Yoga 13, Palm rest was not working.hence I replace the plam rest cover. I also remove i again replace Hindges to resolve hard hindges issue. But when I re-assemble the laptop, when I turn On, nothing displayed on the screen, but you can see the screen is on.  I keep it running for some time and try to connect via remote desktop, I am able to access my laptop without any problem and everything working fine. What could be the reason? I specifically check all connections 2 times, Note: 1. When I press "F9", I can feel the turn ON/OFF of the screen,but still blank screen.           2. I never face such problem before.            3. I also removed black strip at bottom of the LCD screen to remove, hindges for cleaning.  Kindly suggest solution. 

More replies
Relevance 68.47%

I upgraded to win10 yesterday. I also see that now that brightness settings are reversed, seriously........I get maximum brightness when I move the slider to the minimum setting, and a dim display when I move it to what should be the maximum brightness setting.

More replies
Relevance 67.65%

Hi,

I have a Dell Inspiron N5010 with Windows 7. I have been using Time Warner Internet. It worked fine until yesterday. WiFi stopped working out of the blue. When I tried, wired connection works pretty well. I do not recall any significant changes to my computer while this happened. So now I can connect to the wifi hotspot but it says "No Internet Connection". When I connect the LAN wire with the WiFi router, internet works. The moment I remove it, it says No Internet Access, although computer is connected to the hotspot and signal is very well.

The drivers are being shown as up to date in device manager.

I tried following instructions given here: http://www.wikihow.com/Repair-Winsock-and-TCP/IP
This didn't work. Problem persists.

I have been through some threads around here. This is the ipconfig output:

C:\Users\Depp>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Depp-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom Virtual Wireless Adapter
Physical Address. . . . . . . . . : 70-F1-A1-C3-3C-91
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-spe... Read more

Answer:Solved: Internet access problem with WiFi. Wired internet works fine.

16 more replies
Relevance 67.24%

Hi guys, I connect to my router using a Netgear WG111v3 USB adapter with WPA security. It works fine for about 5-10 minutes then websites won't load anymore. I am using Vista so I can't use my onboard network card because Vista doesn't support WPA
I can ping websites still which makes me wonder where the problem lies. For example I can go on google fine, then later I can't connect again but I can still ping it. That goes for all other websites even if I haven't gone on them that boot. Anyone got any ideas what is going wrong? Because it makes no logical sense for this to be happening. Thanks.
 

Answer:Internet works fine, then

So later you can still ping google, but it will not let you view google using your browser?
 

2 more replies
Relevance 67.24%

Have a brand new W500 and it's working quite well, but there seems to be a problem with establishing a wireless connection on startup.  It tries for a really long time - literally 4 or 5 minutes before telling me it could only get a partial connection.  I then start up Access Connections and tell it to connect and it connects with no difficulty.  Of course, in the meantime, lots of other applications have started up that wanted internet connections and have failed because of the initial connection issue.  It's also annoying to have a really fast startup, but then to have to sit and wait several minutes to start e-mail. I've got the most current drivers, Access Connections, windows updates, etc.  I'm running XP.  Obviously the network connection is fine because I can connect with no problem when Access Connections launches. I've tried stripping out all of the startup commands from startup and the HKLM and HKCU registry entries with the exception of Access Connections.  However, it still sits there and waits for 4 or 5 minutes before Access Connections comes up. Is there some sort of log I can look at to see what's failing with the initial connection and why?  Any other ideas what might be happening? Thanks for any assistance you can provide.

Answer:Wireless fails to fully connect on startup, but works fine when I launch Access Connections

Try to remove the Wireless Lan card and reboot your machine. Then check for the latest drivers. Just a thought.

2 more replies
Relevance 66.42%

Ok, after updating XFire and getting a typical "Memory can't be read" error, my internet on my XP Machine stops working. So far, i've tried a virus scan (with weeks-old definitions) and Ad-Aware (again, weeks-old definitions), and a uninstall/reinstall of my NIC (Intel Pro/1000 CT) and it does not want to detect the connection at all.

In addition, my computer in general has just gotten "slow" considering its not breaking a sweat, and its a P4 2.80 GHz. It takes a few seconds just to start a program which would take a split second. I'm assuming this is tied in with the internet problem, or this is the cause.

I would really appreciate the help, you all seem like nice people.

Further specs:

Intel P4 2.80 GHz HT
ATI Radeon 9800 XT
1GB DDR
Soundblaster Audigy 2 ZS
Intel Pro/1000 CT NIC
2 80GB Hard drives
NETGEAR WGR614
Toshiba PCX1100 Cable Modem
Comcast cable internet

Please give me a hand, I would appreciate it.

More replies
Relevance 66.42%

Hello, everyone. A computer of a friend of mine, an HP Pavilion dv7 laptop with 64-bit Vista installed on it, recently refused to open any webpages with any of the browsers installed (IE8, FF and Chrome), while other applications which do not use port 80 by default work just fine (i.e. MSNmsgr, WinUpdate etc.)
The problems started after I removed a few viruses off the computer and Removed the trial version of Norton, which has expired prior to that. I tried to do some troubleshooting -- disabled the Windows Firewall, uninstalled AVG (which is also known for causing issues) and ran "netsh winsock reset catalog" with no result, so now I don't know what else there is I can do, so I'm looking for some help.
 

Answer:Internet works fine, browsers don't

Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to trans... Read more

2 more replies
Relevance 66.42%

This is weird.
Cable internet works fine when I go straight from the modem to the computer ethernet port.
However, if I do anything through a router I can barely get a signal or a connection even to google.
Here's what I've tried so far....
I have a Belkin45 Router and a Netgear WGR614 Router
I have gone straight from the cable modem through each router into the ethernet port of the computer...nothing
I have gone from the modem to the router and used my Netgear wireless USB and I get a signal from the router, I scan the network and find the router no problem but still can not connect to the internet. Did this with each router and found each one no problem.
I have tried 6 different cables
I keep getting server not found or time outs.
Like I said, weird.
 

Answer:Internet works fine...until going through router

Please supply the following info, exact make and models of the equipment please.

Make and model of the broadband modem.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make/model of network card or wireless adapter.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP2, Vista, etc.

Let's try this with either of the routers:

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.
Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

 

3 more replies
Relevance 66.42%

I am trying to use limewire, couterstrike, bitcomet etc, but nothing apart from firefox/I.E. and windows live messenger can connect to MY internet. everything workd perfectly on my neighbours internet, when accessed from my own laptop. Please help me. Thanks.

Answer:No apps connect to MY internet, but connect fine on my neighbours net?

Try checking out your router setup it may be blocking those programs. You may need to login to the router and "enable" the programs as I notice they are P2P programs and quite often you have to permit their use. Try googling for "enabling p2p on my xxxx router" where xxxx is the make / model number

8 more replies
Relevance 65.6%

I have windowsVista, with eastlink internet which is highspeed, its works fine browsing the web and playing online games but as soon as i start to download or steam anything online, the hole internet slows down by alot it can take up to 40 seconds to load an internet page. I have another compter which runs off the same conntection and it becomes really slow to if i try to download or stream stuff online. Also during all downloads the average download speed is 30kps. Is there something i can change on my computer that will stop it from downloading slow? Can anyone help?
 

Answer:Eastlink Internet Works Fine Until I Download!

can anyone help me?
 

1 more replies
Relevance 65.6%

My 6-month-old laptop, which is in the exact same room as my computer (bedroom), can load a webpage almost instantly and download 20mb files in around seven seconds whereas my one-month-old computer takes 15 - 20 seconds to load a webpage and half an hour to download a 20mb file. And sometimes it just refuses to work at all!
 
I've un-installed my antivirus (AVG) as I've had internet problems with it previously, but it unfortunately didn't do anything about my connection.
 
Moving my computer nearer to my router isn't an option either. I really have no idea what to do to make my computer's internet work properly.

Answer:My internet works fine on my laptop but is really slow on my pc?

How is the Desktop PC connected? LAN? WLAN? 
 
Gives this a try:
 
 Please download MiniToolBox , save it to your desktop and run it.
 
Checkmark the following checkboxes:

 

Flush DNS
Report IE Proxy Settings
Reset IE Proxy Settings
Report FF Proxy Settings
Reset FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Devices
List Users, Partitions and Memory size.
List Minidump Files
Close your browsers and click Go. Post the Result.txt located in the same directory as the tool.
 
 Running TDSSKiller to obtain log

 
Note: Don't cure or delete a threat, but choose skip for all instead.
Please download TDSSKiller from here and save it to your Desktop
Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters

In the Additional options: Check Detect TDLFS file system
Click Start Scan and allow the scan process to run

Choose for all threats to Skip for all of them.
Click Continue
Please post the TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)
===================================================

 
 ESET Online Scanner
==================
I'd like us to scan your machine with ESET OnlineScan This process may may take several hours, that is normal.
Hold down Control and cli... Read more

1 more replies
Relevance 65.6%

Hello every one, im new at this stuff so i will get right to the point.
A few days ago i bought an TP-Link ADSL modem (TD-8811).
When i instaled the modem, and network by the book they gave me i tried to connect tto the internet, but it did not work. The windows sended me a pop-up an message like this:
The network cable is unpluged.
I checked the cables and every thing, and it was all fine.
I tried the boot cd a friend gave me and the internet works fine! (its some kid of an small operating sistem, some thing like "Geek squad")

I tried new network drivers, i got an intel network card, and now it says connected but no internet again. Please help. Thanks in advance!
-Sorry for my bad English.
 

Answer:Solved: ADSL works fine, but i cant go to internet

16 more replies
Relevance 65.6%

I have a PC running Win XP Pro and a laptop (acer aspire) running Win XP Home. Both have wireless adapters installed and working.

When I connect them via crossover cable it all works wonderfully. File sharing and internet works great. The PC connects to the internet through ethernet adapter which connects to a cable modem.

HOWEVER, when i set up a peer to peer 'ad hoc' wireless network, the file sharing works fine however the internet does very strange things. Certain websites work fine (such as google, bbc.co.uk and certain others), however others just don't load at all. Messenger doesnt work, outlook doesnt download e-mails and no videos or programs will download. I have tried this with my friends laptop too (same make) and the same thing happens!!

I have tried changing the MAC address and playing around with the ip addresses, but not being an expert i dont really know what i am doing!!

If you have heard of this problem and know how to sort it, please let me know, cos this is driving me insane!! Thanks.

Answer:Internet works fine over crossover, but not through WLAN!

Sounds like you need a router. The things you mention need to be able to reach the specific ip addresses of the two computers.

1 more replies
Relevance 65.6%

I have a mid 2010 iMac 27" 3.2Ghz i3 4GB ram 1TB hard drive space ATI HD4870...

Running windows 7 x64 and OS X 10.6.6

I am using a wireless internet source from nearby, and the connection works great on OS X when I boot into windows the internet is completely un-responisive and when it does work its slower then glass (for those of you who don't know glass is technically a liquid)
I have no idea what the difference is...
 

Answer:Windows 7 internet not working...OS X works fine though

7 more replies
Relevance 65.6%

Dell Latitude D520 running Windows XP Professional with Service Pack 3. Everything about this laptop works fine except for its wireless ethernet. Even the wireless ethernet works fine when accessing the internet and when downloading files; but, when accessing the LAN, I get 'access denied' sometimes and other times I get sl-o-o-o-o-w transfers of files and messages telling me the files I'm copying or running are corrupt.

Example: I attempted to copy a file across my LAN to this laptop. On the WiFi, it copied very slowly for about 10 minutes or so and finally aborted when the bar graph showed about 20% complete. On the wired ethernet, the same file copied successfully in about 12 seconds.

I've checked the settings for the wired and wireless NIC and I can't find any differences.

To be clear, the wired LAN does fine for both internet and LAN access. The wireless ethernet works fine for the internet and presents the problem only when accessing the LAN.
 

Answer:Solved: Wireless works fine for internet but not for LAN

"when accessing the lan" ???

do you have multiple machines on a lan that you are trying to transfer files from???

If yes are they all on the same workgroup????
 

3 more replies
Relevance 65.6%

So I have 2 laptops, a win 7 and a win 8,
The windows 7 laptop works on the internet fine, but the windows 8 one always disconnects, even when the win 7 isn't on.
It disconnects usually when I'm running multiple programs that use the internet on it, but when I run a game like counter-strike, it disconnects too, but not nearly as often.

The router is from 2008 or 2009, but it's a tiny aztech one. I'm sure it's not the isp, because like I said, the other laptop works fine.
 

Answer:One laptop works fine, but the other keeps on disconnecting from the internet

Make sure you have the latest wireless driver from the laptop manufacturer's web site.. Reinstall it if you already have it.

What do you do to regain connection after it has been lost?
 

2 more replies
Relevance 65.6%

Hello, I've recently bought a new computer and I finally got a cord for the internet for it.

Internet works fine for a few minutes(around 2-5 usually), then it completely stops. It doesn't say it was disconnected, it just stops.

So I first thought it might be the cable, so I plugged it in to my laptop for a day and it worked fine. I figured it will work now with the desktop, not at all.

I am on Hughes net, and I have the Ethernet cord plugged into a wireless router.(Wireless has been working just fine the past few days.) We have used a desktop computer with this type of setup before and it worked just fine, that desktop was like a 2001 Dell that could barely stay on.

I am at a loss right now, I've unplugged and plugged almost everything you could possibly do that too. Tried different ports and such just to get different results.

Any help would be greatly appreciated and thanks for spending some time helping.
 

Answer:Internet works fine for two minutes then stops..

7 more replies
Relevance 65.6%

I am trying to get to the route of my problem. There seems to be no problem with my software for Windows XP sp2, however, when I try to go online, I get "Cannot find server, Page cannot be displayed". and if I try another web page, a dialog box appears saying "Internet Explorer could not open the search page"I have run cmd, and websites are pinging with a return of 100%, and all IP addresses are correct. I am on cable broadband (telewest), and this connection is always on, except when I reset it once per week at the mains switch.Could this be a motherboard fault? I have tried re-installing all the drivers, however, in Device manager, there still is a question mark beside the PCI device. The following is what my computer runs on:AMD SEMPRON 3200+ AM2512 DDR2 533 RAMMAXTOR 160GB HARD DRIVE 7200 8MB CACHEASROCK ALIVE NF4G AM2 SATA 2Any help would be greatly appreciated.

Answer:Windows XP SP2 works fine, Internet won't view

does your anti virus manage to up date? if so that would suggest a problem with your browser if not it could be your connection

10 more replies
Relevance 65.6%

Hi guys,

So around 4 weeks ago, I got a new router and internet. The internet is working great for everyone on every device except for my computer. For some reason, my internet is not consistent with its ping (and this is just on my computer, the internet works great with my iphone). It almost seems like for every 1 minute of good internet I have, I have 10 or so minutes where the internet just stinkss. I am posting this on one of those good minutes. The problem started after I, 1. Got a new graphics card, and 2. Changed my antivirus software from Avira to Malwarebytes. If you guys need any more info just ask .

Thanks!
 

Answer:Internet works fine for every device, except my computer.

6 more replies
Relevance 65.6%

Hello again, everyone!  So, I got 2 more new problems on both of my computers.  The first problem is on my Windows 7 laptop.  There are times when I want to open a web page & it won't load up quickly.  I have to wait like 30 seconds to a minute until it loads up.  Then, everything works fine for 30 minutes to an hour until the Internet gets slow to load up again & then everything works fine again.  This has been happening for the last couple of months.  My laptop isn't even that old.  It is 2 years old.  Any help would be appreciated.  Thank you.

Answer:Internet Slow To Load Up, Then Works Fine

Is this occurring at only one website?

26 more replies
Relevance 65.6%

I just had a quick question. I have a wireless N adapter on my PC and I have never had any trouble. I switched ISP's and they brought out a new router and now my network always says 'identifying', and will only say 'connected' every 5 minutes or so, and will only stay connected for maybe 2 seconds tops. What I find weird is even when the network says it's identifying the internet works just fine, 25ms ping on speedtest. Signal strength is 4 out of 5 bars. I'm not too concerned since everything works just fine, but I was wondering if anyone knows what is up with this new phenomenon.
 

Answer:Wireless always 'identifying' but internet works fine??

Uninstall network adapter, reinstall adapter.

Then reinstall drivers

Reset the ip stack after you do that

netsh int ip reset resetlog.txt in elevated cmd prompt
 

2 more replies
Relevance 65.6%

hi there,

ive been downloading movies and other stuff using torrent clients like azureus and utorrent since like a year or so..but recently a few days back all my torrents stopped downloadin in azureus and the tracker status says ok(dht but it jst isnt downloading
i was having connection time out error in the status column and some tests showed that my port wasnt being forwarded...but that problem is solved..the tcp connection and nat tests r clear.
i dont know whts wrong..please help i miss my torrents
 

Answer:internet works fine except for downloading torrents

6 more replies
Relevance 65.6%

My internet works, but when I want to connect my wireless I can't. The modem TWC gave me is Arris Touchstone DOCSIS 3.0 Gateways. I try even with my D-link router but nothing.
My Laptop is Sony Vaio E Series, SVE15112FXS , Windows 7
What to do?

Answer:Internet works fine but I can"t have wireless

Please use this tool to post all the files here will have a look

2 more replies
Relevance 65.6%

Hey everyone!

Um first off my labtop has been working fine lately and then that Anti-Virus 360 installed itself into my computer and wouldnt let me access a thing not even documents...but i was able too completely unistall that program, but after i did everything was working fine again

This includes that i was able to login to hotmail,facebook,ect. then a few days later i can still do everything on my computer accept when i go to login into any site the internet page closes and it doesnt tell me why!

Also im using a different computer so i could log on here and i should also note that when i start up my computer it says this: "RUNDLL Error loading C:\WINDOWS\Bvogodegexin.dll The specified module could not be found"

Any help would be greatly appreciatted and thanks in advance!
 

Answer:Internet works fine, but cant login on any sites?

You should try moving your post to the Security & HJT section. Maybe they will be able to help you out more out there.
 

2 more replies
Relevance 65.6%

Hello,


I'm an IT guy with a background in Network administration, and this one has me scratching my head.

I'm also a DJ, and was installing an application a friend gave to me (freeware) for joining/splicing MP3 files

Here goes:

I double click on the install, a dos box opens and it's decompressing. Then the Windows installer comes up, everything looks normal, so I continue installing the program. (it installs successfully) Meanwhile, in the background, I get a pop-up from Symantec Corporate Anti-Virus telling me a virus has been found (Trojan) in my Internet Explorer Cache directory (setup.exe). It was very generic looking, so I paid it no mind, figuring it had stopped the spyware-installing program from executing, right? WRONG!

I open up my taskman (CTRL-ALT-DEL), not being a dummy, and find processes running I do not recognize..(gee, I wonder why!) I have to terminate them a couple of times to get them to stay gone (Also used "Terminate Process Tree" on one, then they all disappeared) ie.exe was one of them. I ran housecall, it attempted to delete the Webhance infection, and could not. It also found something that was a supposed unknown variant of "VUNDO", and matched characteristics with it. It could not delete that.

So, (having done this many times before on the computers at the office) I go into the Program Files Directory, and find two directories I do not know:

"bat"

"Webhance"

I ... Read more

Answer:After removing ssq*.dll, I now have no internet access (everything else works fine)

Re: After removing ssq*.dll, I now have no internet access (everything else works fin

Also, when I'm doing something mundane (such as loading music or a document), I'll get the pop-up that tells me windows cannot find a connection, and gives me the two buttons (Work Offline, Try again). Now I know there's still a problem.

I'm really ticked off that I can't figure this out. I'm assuming that there are still pieces of something on my HD. The only hope I have is to connect to the internet through Ethernet on BartPE, and run virus removal/spyware scans from that. But I don't think that's going to fix my problem with no internet/network access. I'm guessing that file was somehow tied into a modified registry entry, but I have no idea where to begin.

(sorry for forgetting to post this in the first entry.)
 

5 more replies
Relevance 65.6%

I am currently using a Dell Laptop with Windows Vista, and I'm connected to the internet using a Linksys wireless router. My internet connection is working fine right now and I can connect to the internet fine. But when I try and download something, like a song or a game, I only get speeds of like 10-15 KB per second, which is very slow for this computer.

This problem started like three days ago, and I don't remember installing any new programs in recent memory...

Does anyone have an idea why this could be happening?
 

Answer:My internet works fine, but downloads are very slow...

Make sure your router connection has security enabled (a password and whatnot from the router settings). People around you may be using your connection and this might slow it down.
That's all I can say :/
 

2 more replies
Relevance 65.6%

I'm sure this has been asked 1000 times but I cannot seem to find my exact issue anywhere. Hopefully this helps myself and anyone who runs into this issue.

To start, I have Windows 7 Professional 64bit. Everything worked 100% fine with absolutly no issue and then.... I moved. Now we have Fios instead of Comcast.

Now to the issue. When I have the ethernet connected I cannot get internet access but I have full network access. I went out and purchased a new wirless card and wirless works just fine. I tested 2 different cables, recrimped both of them and nothing. I have activity on the PC and the Router so I am sure they are good.

I have tried everything I have read online, Updated Realtek Family PCI Ethernet drivers from MSIglobal. Disabled/Enabled. ipconfig /flushdns, /release and /renew. I went as far as Backing up and reformating the Hard Drive and before reinstalling the backup I tested it and nothing. Restored my backup file and yep.. nothing.

Its kind of frustrating. I'm not exactly and expert but i am in no way a novice either. This one has me stumped. Im thinking maybe it is a windows service that is not set to start correctly but I figured I would creat a post while I am at work and maybe have and answer to test before I hunt through the services tonight.

Any advice is greatly appreciated

Thanks

Answer:Ethernet=No Internet But Wireless Works Fine

This sounds more like a router problem to me. Have you tried resetting your router then using the ipconfig /all command?

2 more replies
Relevance 65.6%

I just got a brand new computer with wireless capabilities. After some configuring, i am connected to my home network, but i cant connect to the internet that is set up on the host computer. i have already checked all the settings on my computer, disabled the firewall (because i have windows xp sp2), and reset the router twice. i am just wondering what else could be the problem. could the local area connection have something to do with it? please help.

Answer:Wireless Network Works Fine, But Cant Get On Internet

How did you attempt to hook up so far? Did you try this:

start > control panel > network connections > wireless network setup wizard
~~~~~~
Or this on the host computer:

start > control panel . network connections > setup or change your work or home network setup
Run the wizard, choose "This computer connects directly to the internet. The other computers on my network connect to the internet through this computer"
~~~~~~~~

Wait a minute. Upon rereading your original post, I need to know what you are using a router for. Is it a wireless router? If so, then your new computer is not connecting to the internet through the 'host' computer, but rather through the router.

I shall await your answers.

3 more replies
Relevance 65.6%

Computer gets online fine, can not ping or tracert. Tried default DNS and custom 8.8.8.8 - 8.8.4.4. Problem persist with AV on or off.

Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.

C:\Windows\system32>tracert google.com

Tracing route to google.com [2607:f8b0:4007:808::200e]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 2605:e000:d403:fc00:fe52:8dff:fe50:1012
2 8 ms 8 ms 7 ms 2605:e000:efc0:39::1
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 ^C
C:\Windows\system32>ping google.com

Pinging google.com [2607:f8b0:4007:808::200e] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 2607:f8b0:4007:808::200e:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Windows\system32>

Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : DESKTOP-SNQ7LLE
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ether... Read more

Answer:Cannot ping or tracert But internet works fine...

Ipv6(icmpv6) may be blocked try ping <host/ip> -4

4 more replies
Relevance 64.78%

Last night my Internet suddenly crashed, and now both Internet Explorer and Firefox are unable to connect to the Internet although Skype strangely works perfectly. This makes me think it is a DNS issue but I don't know how to proceed. I have tried:

Restarting
Resetting winsock, IPv4, IPv6
dnsflush
Changing proxy settings (currently there is no proxy)
Using different connections (I am on a wired connection, although two different wireless connections get the same results)
System restore. When I first tried system restore, I chose the nearest point to restore to and was met with "The specific object was not found (0x80042308)." Clicking run system restore then resulted in "Catastrophic failure (0x8000FFFF)."
IPv4 and IPv6 are both set to automatically aquire DNS and IP
Removed Bonjour just to be safe
Took down all firewalls
Ran a full virus scan

I can ping my IP, default gateway, and DNS servers along with any other IP but I cannot ping URLs. Attempting to connect to a URL results in "Server not found" and connecting directly to an IP results in a connection time out.

I'll try to upload what I believe to be the relevant bits of my ipconfig. Any help would be greatly appreciated. Thanks.

Answer:Internet browsers don't work' but Skype works fine

Here is my ipconfig screenshot, hopefully this information is helpful.

4 more replies
Relevance 64.78%

I can surf the net and email works fine, but when I try to access the network computers for sharing it says I don't have access to them. Anyone else have this problem and/or any suggestions?

Answer:Internet Works Fine, But Can't Access Other Computers On Network

How are you trying to access them? Directly, or have you got them mapped as network locations?
Also, what operating system are the networked locations?

8 more replies
Relevance 64.78%

I cannot access the internet through EI or Firefox on our home computer that is running Vista.Ofcourse my laptop running XP works fine. I have tried a number of fixes from different forums and so far nothing has worked. I'm working off the same wireless network for both, I have had the Vista computer for about a year, and the internet as worked relatively well until about two days ago. The problem existed before I installed SP1 and has persisted after the install.

Can somone work with me on this to figure out what the problem is? Thanks.

Answer:Internet quit working w/ Vista OS works fine w/ XP OS

Hi -

Please follow the instructions found HERE - but you will have to copy AutoRuns and the batch file over to the Vista PC.

Attach all to post.

Regards. . .

jcgriff2

.

7 more replies
Relevance 64.78%

Hi,

Im unable to upload files to any website. I have a wireless mtnl internet connection. browsing and downloads work fine, its just a problem with the uploads. Also, when I connect my phone using wi-fi, again, downloads are fine but it wont upload anything... was going through google regarding this problem, one of the forums said download and run hijackthis, save the log file and post it to a forum if you aren't sure about what to clean. I've run hijackthis and saved the log.... Any ideas???
P.S: Attached is the log:
 

Answer:internet works fine but unable to upload pics

same problem here.. Mumbai MTNL Triband.. all the sites are working fine except the HTTPS sites, further unable to upload any stuff the upload speed is dead i suppose.. had called Customer care, never picked up the phone but got the confirmation that the issue has been resolved on cell via message. strange...

I thought it would be the problem of Wireless Modem + Router, but its still the same with Normal LAN Modem + Router.. not sure where the problem is...
 

2 more replies
Relevance 64.78%

Hi,
 
On my desktop computer, all access to the internet is blocked except for one program. (Slavanap). people can log into me there, Also, it seems my windows firewall somehow got disabled.
It did not start that way though, At first, It seemed that I could just not use windows Explorer, everytime I would open it it would crash, but using google chrome, it worked fine. then slowly that stopped working as well, and I started using Mozilla firefox that i had on the computer and it worked ok till I rebooted. now nothing works except for that one program, slavanap.
 
I did a windows network diagnostics and everything passed except the DNS and HTTP, HTTPS, FTP connectivity. They all failed.
So it seems i have a DNS failure on all levels of the test. The HTTP part of th test fails on all levels as well. everything else passes
Under HTTP, HTTPS test,  I get an error 12007 "The address could not be resolved.
 
My laptop can access the internet, though without a problem via the same modem, so I am assuming that It is not the modem and it is not my service provider, but rather some kind of malware on the computer that changed settings and disabled my firewall. It is greyed out so it cannot be turned on. When I tried to turn it on another way it told me the firewall service was off and when it tried to turn it on it failed. It said it is controlled by group policy.  I checked group policy and I do not see anything that is disabled.
 
I lent my usb stick to ... Read more

Answer:All access to the Internet is blocked on 1 computer - works fine on other

Welcome aboard   NOTE 1. Use another working computer to download necessary tools and USB flash drive to transfer them to bad computer.NOTE 2. Install Panda USB Vaccine, or BitDefender’s USB Immunizer on GOOD computer to protect it from any infected USB device.  Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post... Read more

14 more replies
Relevance 64.78%

I think this has been happening since I upgraded to windows 8.1, back in October/November (which is around where this problem started). It's WiFi internet.

I can connect to the internet just fine, speeds are normal, all that good stuff. But when I'm connecting to a new network it takes forever (and "Connecting to the network is taking longer than usual" comes up) and it comes up with "The connection is limited."

The most annoying part is that this happens between four DIFFERENT connections in 2 countries. So. I need this issue solved, it takes forever to connect to the internet if I disconnect for any reason, My phone connects to the WiFi just fine, so it's not a WiFi issue. Even connecting to the WiFi with an ethernet cable doesn't work.
 

More replies
Relevance 64.78%

I have been trying to diagnose this problem for a while now:

On a 4 computer network, all machines see each other in their windows workgroup, 2 computers can connect (via windows filesharing) to each other but not to the 2 others, and 2 computers can connect to the other 2 but not each other. Pings follow the same pattern, and all computers can acess the internet from behind the router. all firewalls have been removed, routing tables appear to be fine, and traffic is getting through to the isolated computers (captured using wireshark).

Any ideas?
 

More replies
Relevance 64.78%

Hello,
I've struggled all night to find a solution to this problem but I dont see to find the answer. I share a router with my roomates and we both have macbooks. I also have an additional PC.

When I tried accessing certain websites (for example: www.rapidshare.com or my.calendar.net) from the macbooks I get a DNS error:

DNS ERROR - cannot find server.

Also next to the address bar is shows me that "the website does not support identity information". However, it works fine with my PC when I enter the address. I tried flushing the arp cache using the following commands:

sudo arp -d -a and
dscacheutil -flushcache

but the problem persists. In addition, I did a tracert command in my PC to find the IP address. I typed the ip address in the macbook computer and it work perfectly.

First, I thought it was my macbook but the problem is the same in my roommates. Also, I thought (for some reason) I got the adress blocked but it works in my PC.

So I am assuming its my router (DI-2254) but I reset it and nothing. I suspect it has to be with my PS3 that I used when trying to play online but I doubt it.

?? Any solutions ????
Thank you!
 

More replies
Relevance 64.78%

Ok this is a relly weird problem i am having, my internet will work fine all day untill around 7:50-8:00 oclock when it will start disconecting me every few minutes and it continues through most of the night. anyone ever herd of a problem like this and how can it be solved?
 

Answer:Internet works fine all day untill 7:50 then it disconects all night

help plz
 

2 more replies
Relevance 64.78%

I'm working on a dell deminsion 2400 with win xp pro sp2 and when the machine boots up an error message says "Internet Explorer has encountered a problem and needs to close. We are sorry for the inconvenience. if you were in the middle of something, the information you were working on might be lost." and it has a close button and thats it. and IE is not even open. no details button, no send error report, nothing. and when you click close, it just comes back in a few seconds. the error is generated by dwwin.exe which i found out is Dr. Watson. this computer was infected with viruses and spy/adware. my boss cleaned some of it off of there on-site, then brought it back in-house for me to finish, so i'm not 100% sure what all viruses were on here. i cleaned mainly spy/adware off of it and have ran these programs in safe and normal mode: trend micro housecall, panda active scan, norton internet security 05, trendmicro spyware scan, x-cleaner, adaware, spybot, hijackthis, & ccleaner.
i have also ran the repair twice, ran the system file checker, chkdsk with all the switches. i have turned off error reporting and still get the message and internet explorer works fine. all programs work fine. i followed microsoft knowledge directions to uninstall IE in the registry and to turn off dr watson with no good results. i really don't want to reload the os because i will have to backup a lot of files and reload a lot of software and besides everything works f... Read more

Answer:Getting Internet explorer error message & IE works fine

Do you get this error in safe mode?

Also, try opening up msconfig and turning off all the startup items. Does this help? If it does, I'd look to see what programs you are running that may be causing this issue.
 

2 more replies
Relevance 64.78%

I hooked up a brother MFC-790CW fax/scan/printer to my wireless/wired belkin router. I have a desktop that is hardwired to the router and it can access the MFC-790 with no problems and in several different configurations. BUT, the laptop just won't talk to it. WHY? The laptop has no trouble connecting to the router and accessing the internet. I have installed all of the MFC-790 software. The laptop successfully pings each entitiy on my network. So, I'm stumped. The laptop has a Marvel Yukon wireless adapter. Maybe there are some issues there. I don't know. My laptop is using Windows XP. Do I need to upgrade it to Vista or windows 7? I thought that maybe I needed a print server or a residential gateway, but the guys at the geek squad said "no, it should work". I have since found that the MFC-790 has a printer server in it. So that is not the problem. I suspect that the laptop would access the printer just fine if I wired it to the router. So I think that the wireless aspect of this puzzle is where I need to focus. But I can't see why the laptop can access the internet wirelessly through the router but not the printer. Would love any input on this. Thanks.
 

Answer:wireless internet works fine, but why can't I access the printer????

6 more replies
Relevance 64.78%

So, I'm working in this domain environment and 99% of everything is peachy-keen. But every now and then someone will complain that they have no internet access. This maybe happens to one user in 40 maybe once a month - tops. So it's not critical.
Just very weird.

Most workstations are Windows 7 since the client hasn't been keen to use Win 8 with Autocad. Windows Server 2008 R2 running DNS, DHCP and VPN server. No rogue DHCP servers. We checked.

When checking out the workstation I note that the user can get to the server for files. They can ping the DNS server and gateway by name or IP and get a correct response, but when you try to ping google.com, no response.

My usual fix is just set them static above the DHCP scope. Forget it for a week. Come back and reset them to DHCP and everything will be fine.

Has anyone run in to anything like this? Any suggestions on what might need checking?

More replies
Relevance 64.78%

my brother and i both have the same, but otherwise seemingly unique, problem. i have googled the problem and haven't found anyone with remotely similar problems. no matter what game i try it with, it locks up with lan games. if it searches for a lan game( some games auto search, that really gets annoying) it just locks up. if it doesn't auto-search, itl lock up trying to host a game. i can play online games just fine. No problems connecting to our server pc for files either. just cant do a LAN game. i could realy use some help here. thanks to anyone who can help.also , these games all used to allow me to play multiplayer just fine its just in the past month or so that lan games stoped working.

Answer:Lan games lockup for any game, internet works fine.

what kind of router do you have? is it wired or wireless?

2 more replies
Relevance 64.37%

This problem happened after sending my laptop away to be 'fixed' for a faulty wireless connection. It came back with both this problem and photoshop failing to start ('licensing for this product has stopped working'), where they both worked perfectly before. I can't send it away again as I need it for uni work, but this is driving me mad.
Pages are not loading in both IE and Firefox (3.0.6), there is no error message, just 'Loading...' in the tab title and a blank white page - loading bar appears in the bottom right but remains empty indefinately. When this happens, MSN and other such programs keep working fine.
This happens randomly with no apparent cause - the browsers will work fine and then suddenly seem to 'switch off' in this way and not load any pages.
Wireless capability is on and internet connection is working fine for other people in the house. Disconnecting and reconnecting does nothing.
Reinstalling hasn't solved the problem.
Scanned with Kapersky to no avail, can't find any viruses.
The only thing that fixes this problem is an entire restart of the laptop. I'm finding myself having to restart several times a day and it's very frustating!
General Info:

Vista Home Premium
service pack 1

MicrolinkPC UK Ltd
Intel® Core™2 CPU T5600 @ 1.83GHz
2.00 GB RAM
32-bit operating system

Answer:Browsers 'Loading...' indefinately, but internet connection works fine!

It seems as though you may have an infection! Please navigate to HERE, read the Preparation Guide and start a new topic requesting help.

2 more replies
Relevance 64.37%

I am having trouble with my internet connection in regular mode on my Acer Espire 15, it connects but says limited access, i have tried reinstalling the network, but still wont work. The internet works fine in safe mode. Wondering if anyone knows how to fix this problem. It is very annoying and I am only able to use the internet in safe mode at the moment. Thanks for any help you may be able to offer...

Answer:internet limited access in regular mode works fine...

In this case, it is recommended to perform a clean boot to check if one or more applications in your computer are causing conflict when you work in normal mode. To know how to perform clean boot and to troubleshoot issues while in clean boot environment, you can refer to the instructions mentioned on the following link:https://support.microsoft.com/en-us/kb/929135 Hope this will help you.

1 more replies
Relevance 64.37%

Following over from this post: http://www.bleepingcomputer.com/forums/t/209081/browsers-loading-indefinately-but-internet-connection-works-fine/This problem happened after sending my laptop away to be 'fixed' for a faulty wireless connection. It came back with both this problem and photoshop failing to start ('licensing for this product has stopped working'), where they both worked perfectly before. I can't send it away again as I need it for uni work, but this is driving me mad.Pages are not loading in both IE and Firefox (3.0.6), there is no error message, just 'Loading...' in the tab title and a blank white page - loading bar appears in the bottom right but remains empty indefinately. Screenshots: here and hereWhen this happens, MSN and other such programs keep working fine.This happens randomly with no apparent cause - the browsers will work fine and then suddenly seem to 'switch off' in this way and not load any pages.Wireless capability is on and internet connection is working fine for other people in the house. Disconnecting and reconnecting does nothing.Reinstalling hasn't solved the problem.Scanned with Kapersky to no avail.The only thing that fixes this problem is an entire restart of the laptop. I'm finding myself having to restart several times a day and it's very frustating!General Info:Vista Home Premiumservice pack 1MicrolinkPC UK LtdIntel? Core?2 CPU T5600 @ 1.83GHz2.00 GB RAM32-bit operating system DDS.txt log:DDS (Ver_09-02-01.01) - NTFSx86 Run by Rebecca... Read more

Answer:Browsers 'Loading...' indefinately, but internet connection works fine...

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructio... Read more

2 more replies
Relevance 64.37%

Several scans have been preformed before posting this, it was infected with zeroaccess rootkit, which I can no longer see traces of. Here is whats been done so far, this is over a remote connection to this pc so I want to make sure if possible, that everything looks ok before booting back into normal mode to test.
ran TDDSkiller, rogue killer, tweaking.com tool. Rogue Killer found lots of traces of zeroaccess, ran tdds in normal mode, as well as adw. Not 100% sure but I believe Hitman pro and Malwarebytes was run as well, Bit Defender endpoint is installed as well. I do not have the log files for them, so we will start from scratch.

FRST Log:
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 19-04-2015
Ran by Daniel (administrator) on SPRINGER on 18-04-2015 23:34:20
Running from C:\Toolkit
Loaded Profiles: Daniel (Available profiles: Daniel)
Platform: Windows 7 Home Premium Service Pack 1 (X64) OS Language: English (United States)
Internet Explorer Version 11 (Default browser: IE)
Boot Mode: Safe Mode (with Networking)
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/

==================== Processes (Whitelisted) =================

(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)

(LogMeIn, Inc.) C:\Users\Daniel\AppData\Local\LogMeIn Rescue Unattended\LMIR0001.tmp\unattended_srv.exe
(LogMeIn, Inc.) C:\Users\Daniel\AppData\Lo... Read more

Answer:No internet access in normal, safe mode works fine

==================== One Month Modified Files and Folders =======

(If an entry is included in the fixlist, the file\folder will be moved.)

2015-04-18 23:33 - 2009-07-14 01:13 - 00006442 _____ () C:\windows\system32\PerfStringBackup.INI
2015-04-18 23:28 - 2010-11-22 22:07 - 00000000 ____D () C:\Users\Administrator
2015-04-18 23:28 - 2010-11-21 23:22 - 00000000 ____D () C:\Users\Daniel
2015-04-18 23:28 - 2009-07-14 00:45 - 00267672 _____ () C:\windows\system32\FNTCACHE.DAT
2015-04-18 23:25 - 2009-07-13 22:34 - 00000439 _____ () C:\windows\win.ini
2015-04-18 23:19 - 2012-02-09 11:33 - 00006442 _____ () C:\windows\SysWOW64\PerfStringBackup.INI
2015-04-18 22:48 - 2009-07-13 23:20 - 00000000 __RHD () C:\Users\Default
2015-04-18 19:27 - 2009-07-14 00:45 - 00015792 ____H () C:\windows\system32\7B296FB0-376B-497e-B012-9C450E1B7327-5P-1.C7483456-A289-439d-8115-601632D005A0
2015-04-18 19:27 - 2009-07-14 00:45 - 00015792 ____H () C:\windows\system32\7B296FB0-376B-497e-B012-9C450E1B7327-5P-0.C7483456-A289-439d-8115-601632D005A0
2015-04-18 19:21 - 2009-07-14 01:08 - 00000006 ____H () C:\windows\Tasks\SA.DAT
2015-04-18 18:35 - 2011-01-15 11:31 - 00000000 ____D () C:\Users\Daniel\Tracing
2015-04-18 18:18 - 2009-07-13 23:20 - 00000000 ____D () C:\windows\system32\NDF
2015-04-18 16:42 - 2014-02-28 10:24 - 00000258 __RSH () C:\ProgramData\ntuser.pol
2015-04-18 14:27 - 2013-01-13 14:25 - 00000000 ____D () C:\Program Files (x86)\IlemiTVApp.com
2015-04-18 14:22 - 2014-02-28 16:21 - 00000000 ____... Read more

20 more replies
Relevance 64.37%

Hello, I am new here. I have an HP Pavilion entertainment laptop. Everything was functioning just fine. Then, windows update happened. It was a critical update that cannot be undone. I performed the update. Immediately after all of the preinstaled HP software quit working. I fought and fought and I have most of it working again but all of it is very buggy and crashes a lot. HP Help and support and HP health no longer work. I had to install the vista versions and I run them in compatibility mode. They still don't work rite. Another critical update was released and then my internet port on the side stopped working. My laptop cannot connect to the internet through it but will via wireless. In the hardware manager my internet card shows up as the driver failing to load. It is Realtek PCB family controller. Uninstalls and re installs don't work. I even used a registry cleaner (registry first aid) to uninstall it so as to remove all the registry keys. Letting windows try to install the driver fails as does letting the realtek software try. Also, every reinstall just adds a number to the end of it. I am on Realtek (3) now. I need to get this driver to work but it will not. I am not seeing a whole lot about it so I guess this isn't a common problem. Everything else I have works fine so far as I can tell. I also tried using the file browser to hunt down all things realtek related and delete them. Windows just gives me the new hardware box, puts back what I del... Read more

Answer:Wired internet jack not working but wireless works just fine

Run Windows System Restore - choose a restore point prior to the installation of the Windows Update you mentioned -
START | type rstrui

What is the exact model number of the HP laptop - look on the label on the bottom.

Registry cleaners are unnecessary and can cause registry damage -

http://www.techsupportforum.com/f217...er-401950.html

http://www.techsupportforum.com/f217...ml#post1722857

Regards. . .

jcgriff2

`

4 more replies
Relevance 64.37%

So it just happens 100% random out of no where and I get this error:

(note i ripped this image off google but this is the exact thing that happens)
so I found TWO temporary fixes.

One: unplug router / modem for 10 sec and replug

Two: Go to the network settings and disable the ethernet (note I am connected via ethernet cable, 100% wired)
disable it

Enable it BUT i have to enable it about 30 times before it enables.

When it's enabling, it doesn't enable, it shows the message that it's enabling and I refresh the background and it's still disabled. I have to keep enabling until it randomly works (if anyone knows why I have to keep enabling it 30 times for it to actually enable please let me know)
why does my internet randomly stop on my PC? it works fine on other devices while its not working on my PC and it takes forever to enable the ethernet after i disable it.

More replies
Relevance 64.37%

Hi and thanks -  I have a T43 running Windows XP with a sound issue.  Since about a month ago, anything over the internet (ie  pandora, youtube, etc.) "skips" - sound pops in and out annoyingly.  However, internally, such as playing mp3's from the hard drive or a flash drive works perfectly.   I have uninstalled and reinstalled the "Soundmax integrated digital drivers" , "removed" the device (from device mgr) and let the "add harware wizard" find it again, etc., etc.   Can you help me?  Thanks!

Answer:t43 sound - skips on internet streams but works fine locally

When you say "Internet"...are you implying a wired connection, or a wireless one?
 
What is the full 7-character model number of that T43 - located on the same sticker that holds the serial number and the production date on the bottom of the machine - so we could look at the exact configuration....

6 more replies
Relevance 64.37%

I have an older laptop that is running Windows XP.  This is not my main computer but I do like to use it when I do not want to use tablet or desktop.  It virtually will not browse internet in regular windows mode.  It freezes and takes forever to go from one internet site to another.  However, the internet works fine when in safe mode.  I have Malware Anti Malware Free and AVG 2015 Free.  I have run scans in both safe mode and windows mode and it does not detect anything.  I also have CC Cleaner which I run frequently.  I have downloaded Autoruns and tried to delete some startup loads using your data base.  However, many are not in your data base.  I did find some that I could eliminate on startup but not that many because if it was not in your database, I left alone.  Do you have any other suggestions I could try.  As I said, this laptop is older and not my main computer but I would really like to try and revive it so that I can at least use it sometimes.

Answer:Internet freezes but works fine in safe mode Windows XP

If a client comes to me not only now but, for quite a while now, I will not let them spend time, money, effort or thought on an XP machine.  For starters they absolutely should not be used connected to the Internet.
Certainly @ this point in time, if an XP machine is not working properly, just don't bother w/ it... can't be used on the Net, anyway.  As for non-Net use, still, not worth bothering w/ it.  Time to just let it go & move on.  After 15 yrs, put it out to pasture.
 

24 more replies
Relevance 64.37%

Hello,

I have a networked computer that is experiencing the following issues:
1. Logmein traffic works perfectly, is it super fast and I have no issues.
2. Internet will not load, or loads impossibly slowly.
3. Dropbox does not load beyond 1KBs and then will drop out
4. Updates will not work/download
5. Downloads/ftp traffic fail

What I have tried.
1. switching ports it is plugged into on the router, to a port that another (perfectly working) computer is plugged into.
2. Changing IP address
3. Running the norton removal tool
4. Logging in under a different account
5. removing the hosts file
6. Setting IP to dynamic

I have had no luck beyond that...any ideas? I am a CCNA here and this is simply driving me NUTS lol

Thanks,

William

Answer:Internet, ftp, dropbox and updates not working but logmein works fine.

Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.List Minidump FilesClick Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.

11 more replies
Relevance 64.37%

Hey all,

I had an annoying virus the other day, and ended up removing it with MalawareByte in safe mode. But all of a sudden I noticed when I tried to connect to the iTunes store it instantly gave me an error saying "connection timed out, Check network settings", yet my internet (wired) works fine browsing with firefox etc. Then I noticed when I launched Steam it wouldn't display anything on the Steam store except a white screen that says "Navigation to this store was canceled". Same thing happened with every application I tried that uses the internet for updates etc. I even tried Windows update, and I go the same thing.

Like I said- The internet itself works fine, Browsing and downloading have no Issue.

I'm running Vista 64bit, current updates installed as of a week or so ago. Other computers on my network don't have the problem, so it must be something with this machine.

I don't have any antivirus software running, and Windows firewall/security center is completely turned off.

It's probably something simple, but I've messed with every network setting I can think of to no avail. I haven't found an answer to this specific problem anywhere, but people with similar problems seemed to have luck with putting their Vista disc in and doing a repair. My copy of Vista is completely genuine, but it may take me all weekend to hunt for my disc.

Any help is much appreciated.

Thanks!
 

Answer:*All applications are blocked from internet access, yet browsing etc works fine?

found this,may be of use

Setup DMZ for the affected computer Routers contain firewalls and other network technology that may be causing this problem, but most also have support for a "Demilitarized Zone" (DMZ) computer which is not put behind the firewall. This is a convenient way to test the router, and users should first find what IP address is being given to their computer, and then set that IP address as the DMZ computer. If iTunes connectivity works, then the problem is clearly with the firewall settings in the router.

Ensure ports 80 and 443 are open The router should have internet ports 80 (http) and 443 (https) open by default, but it is possible some setting has changed to restrict these ports in some situations, possibly by them being reserved for a specific IP address on the network through port forwarding. These settings can be automatically set in some cases, so users should check and remove any port forwarding or port triggering settings that might include these numbers.

Disable Firewalls Routers usually contain some sort of firewall which is enabled by default. As a test, users might try disabling the various firewalls that are on the router. These might include NAT, SPI, or content filters, in addition to "true" firewalls which block specific ports and services. If any options to disable firewalls are available in the router's settings, users are encouraged to try turning them off.

Toggle UPnP settings Most modern routers suppo... Read more

2 more replies
Relevance 63.96%

I have a new router connected to my internet from FIOS. I was sick of the ActionTec router requiring a reboot every few days in order to get it to hand out ip addresses again, so I purchased a Ubiquiti edgmax router. After changing the MAC address of the
router to match the MAC address of the actiontec router, I was able to get it functioning. Sadly, that's when the weirdness began. I am able to connect to the internet fine on almost all my devices. I have two Roku streaming media players and an Ooma Ip phone
box that connect to the internet fine with the new router. All my iOS devices connect fine to the internet. I have a dual boot desktop connected via Ethernet and when I boot to Linux, it connects to the internet fine. If I reboot to Win7 (same exact hardware!),
there is no internet connection. I can see the other devices in the network map (I see the Brother printer and the Roku boxes) that are on this side of the firewall, but Internet access past the firewall is not available (red X between router and Internet).
I have done a virus scan using both MalwareBytes and AVG (in safe mode), and there are no virus found by either. I can reconnect the crappy Actiontec router and everything is fine. I also tried bringing the router, wifi access point and Win7 laptop (that
was NOT connecting to the internet at my home) to my office and connected it all here, and it works fine!
WTF!!!
To say that I am frustrated would be an understatement.
I tried contacting Ubiquiti ... Read more

More replies
Relevance 63.55%

Hey all,

I had an annoying virus ("AV" or "AVE") the other day, and ended up removing it with MalawareByte. But now when I try to connect to the iTunes store it instantly gives me an error saying "connection timed out, Check network settings", yet my internet (wired) works fine browsing with firefox etc. Then when I launched Steam it wouldn't display anything on the Steam store except a white screen that says "Navigation to this store was canceled". Same thing happened with every application I tried that uses the internet for updates etc. I even tried Windows update, and I go the same thing.

Like I said- The internet itself works fine, Browsing and downloading have no Issue.

I'm running Vista 64bit SP2, current updates installed as of a week or so ago. Other computers on my network don't have the problem, so it must be something with this machine.

I don't have any antivirus software running, and Windows firewall/security center is completely turned off.

It's probably something simple, something lingering from the setting the virus changed perhaps, but I've messed with every network setting I can think of to no avail.

Any help is much appreciated.

Thanks!

Answer:All applications are blocked from internet access, yet browsing etc works fine. Vx64

It's definitely a dns settings somewhere. It could be in your network settings itself or IE could be set (causing the system too) to use a proxy server. Check that it is not. If you need help doing that, let us know.

If you have mdnsresponder.exe in the task manager, you have the Bonjour service installed. In this case, also let us know.

I personally disable the dns client. If you'd like to do the same, type services.msc in the start menu and hit enter. You can do so here.

If you don't disable the service, then run this instead at an elevated command prompt:


Code:
ipconfig /flushdns
If it still doesn't work out and you don't have the things mentioned, Google on how to set a static ip address and use a free dns server while doing so, from OpenDns website.

4 more replies
Relevance 63.55%

Running  windows xp on a pc.....We have been experiencing random drop offs on the wired connection to the desktop which is wired directly into the cable modem.  We also have a d-link router connected to the modem and the wireless connection HAS NO PROBLEMS...Called Comcast, we have no signal problems, which is evident with the wireless working.This, to not so computer savvy me, means its a desk top problem....I can always reconnect the desk top to the internet after a drop off by clicking on control panel, clicking network connections, disabling the internet connection and the enabling it again, But doing this every 2-10 minutes doesn't let you get anything accomplished!One questionably important tidbit...We have a "warning" that is popping up from microsoft that we may be the victim of counterfit software, as we had to reformat our hard drive several months ago, and our computer came pre-installed with the XP and we were not provided a disc....You get the picture.  I don't know if this may be the issues or not.Also, There was No virus protection on the desktop!!!??? So I have run Malwarebytes Anti-malware, and cleaned up a few problems, also installed McAfee and run a complete scan, cleaned up a little more.Been reading though a few similar posts and ran HijackThis and Remove It ProRestarted a hundred timesBut I must admit, with hijack this, I didn't know what items were valid and what were not, so I did not "fix" file inform... Read more

Answer:Randomly Loosing wired internet connection, but wireless works fine!!!???

Quote from: indytoo on September 01, 2009, 06:49:40 AMOne questionably important tidbit...We have a "warning" that is popping up from microsoft that we may be the victim of counterfit software, as we had to reformat our hard drive several months ago, and our computer came pre-installed with the XP and we were not provided a disc....You get the picture.  I don't know if this may be the issues or not.Also, There was No virus protection on the desktop!!!??? Let's see - no AV protection and a pirated version of the OS. Hmmmm. Yeah, I think we can guess your problem.

12 more replies
Relevance 63.55%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

Answer:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

15 more replies
Relevance 63.55%

I have windows vista ultimate edition. Just the other day when I open IE7 it tells me the website is not valid. I can on the internet fine with firefox. Some websites I go to though do not support firefox. Can you help me fix this problem?
 

More replies
Relevance 63.55%

Hi guys,

All of a sudden my desktop internet has stopped working. I am typing from my laptop now and it works fine, it also works fine on my ps3. I don't think I changed anything, i just went away for a week and when I came back the net was down. It's like it doesnt even try to open any webpages.

Here is the ipconfig information

Windows IP Configuration

Host Name . . . . . . . . . . . . : JDQUAD
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . : 00-1E-8C-70-FA-FF

Ethernet adapter Network Connect Adapter:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Juniper Network Connect Virtual Adap
ter
Physical Address. . . . . . . . . : 00-FF-68-3B-84-8A

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8187 Wireless 802.11g 54M
bps USB 2.0 Network Adapter
Physical Address. . . . . . . . . : 00-15-AF-51-EB-52
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP... Read more

Answer:Home wireless network - internet works fine on laptop and ps3 but not desktop

6 more replies
Relevance 63.55%

My internet works fine with the wire from modem directly connected into the laptop but when the wire from modem is connected to the router, I am not able to access the internet.
I tried to make my laptop (Running windows 7 64 bit os) as the router and i can easily access net on my other devices.

I thought there is a problem with my router. So I took my router to my cousins place who has the same ISP provider. And to my surprise ,my router worked perfectly there.
I cannot understand what i can do to fix my problem.
My ISP just provides me the wire , the modem is installed somewhere out. I just get the wire from the modem.

My ISP gives dynamic ip addresses. I have to login in the site portal.beamtele.com every time i connect the wire to my ethernet port of the laptop.
I took the router to my friends place sharing the same ISP with the same package. My router worked fine there.
i brought his Belkin router to my home to check. And at my place, it didnt work.
 

Answer:Solved: My INTERNET works fine with my modem but very slow with the router (netgear,

16 more replies
Relevance 63.14%

Hello and hopefully someone can help me out.

I am running a Dell computer using Windows XP. A few days ago my mother-n-law got a virus on our computer by clicking on spam e-mails. I figured out how to get rid of the virus but I think I made something happen where the PC will not connect to the internet. I have it connected to a Netgear Router. Now the Router is fine. I can access the internet off of my laptop with no issues. When I try the PC I can't access the net. When I go to Control Panel - Network Connections - Local Area Connection - Support Tab my computer doesn't have an IP Address. I've tried getting into the Router using 192.168.1.1 but the computer won't let me. I'm not sure where to go from here. I've tried calling Tech Support but they couldn't help me. Hopefully you guys can help me out with this one.

Thank you for your time.
 

Answer:Router Works, Internet Works but PC Won't Connect

7 more replies
Relevance 63.14%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

Answer:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

2 more replies
Relevance 62.73%

Hey all,

I had an annoying virus the other day, and ended up removing it with MalawareByte in safe mode. But all of a sudden I noticed when I tried to connect to the iTunes store it instantly gave me an error saying "connection timed out, Check network settings", yet my internet (wired) works fine browsing with firefox etc. Then I noticed when I launched Steam it wouldn't display anything on the Steam store except a white screen that says "Navigation to this store was canceled". Same thing happened with every application I tried that uses the internet for updates etc. I even tried Windows update, and I go the same thing.

Like I said- The internet itself works fine, Browsing and downloading have no Issue.

I'm running Vista 64bit, current updates installed as of a week or so ago. Other computers on my network don't have the problem, so it must be something with this machine.

I don't have any antivirus software running, and Windows firewall/security center is completely turned off.

It's probably something simple, but I've messed with every network setting I can think of to no avail. I haven't found an answer to this specific problem anywhere, but people with similar problems seemed to have luck with putting their Vista disc in and doing a repair. My copy of Vista is completely genuine, but it may take me all weekend to hunt for my disc.

Any help is much appreciated.

Thanks!

Answer:All applications are blocked from internet access, yet browsing etc works fine. Vista 64bit

Are you sure you are 100% clean?

4 more replies
Relevance 62.73%

I have a Windows 7 desktop computer to which a local printer is attached and shared via my homegroup.

From a Windows 7 laptop I can add a printer. It sees the printer, connects to it, and prints just fine.
From a Windows 8 laptop if I try to add a printer, it searches and sees the printer. When I try to connect to it, it gives me an error, "Windows couldn't connect to the printer. Check the printer name and try again. If this is a network printer, make
sure that the printer's turned on, and that the printer address is connect."
Any suggestions? Again, I can access it and print to it just fine from another laptop, so I know nothing's wrong with the printer itself, the connection to the desktop machine, or the sharing on the homegroup.
Thanks in advance

Answer:Can't connect to Homegroup printer in Windows 8 -- works fine in Windows 7

Hi,
Please check if your Windows 8 laptop join the HomeGroup successfully.
If yes, after the printer is shared, you can get to it through the Print dialog box in any program, just like a printer that's directly connected to your PC.

Meanwhile, please turn off your Windows 8 firewall and anti-virus temporarily to check the result.


Karen Hu
TechNet Community Support

2 more replies