Computer Support Forum

D-link wbr-1310 "How to reset password???"

Question: D-link wbr-1310 "How to reset password???"

I have a WBR-1310 D-link and was in setup this morning trying to fix my password cause the old one stopped working. Somehow I changed the password and no longer have access to the settings to change it to one that I can use to log on with my other wireless devices!!! Is there a way I can reset the whole thing? I mean something that makes sense to someone who is new to wireless internetting?

Relevance 100%
Preferred Solution: D-link wbr-1310 "How to reset password???"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: D-link wbr-1310 "How to reset password???"

There should be a small reset button on the back,probably
inside a little hole.
Use a straightened paper clip or something thin and press that
button for 10 seconds,then wait for it to reboot.
You don't have to press it real hard.
It will reset to factory defaults.
You will need to login at the default IP with the default password
and set the router up again.

1 more replies
Relevance 95.53%

I may have accidently deleted my user password while trying to change my password. I have a usb password reset but when i try and use it Windows  says , " File type unknow , windows does not recognize this file type." The only thing they
recommend is to go to the web for help. I also have an Administrator account . Can i change my user account password with my Administrator account without using my password reset ? Also what good is a password reset if windows can't  open it up. Can you
recommend any Microsoft or safe third party downloads to open the "psw' file? I would greatly appreciate a reply. Thank you.

More replies
Relevance 92.25%

Have a Lenovo Notebook. Had Insider Preview 17063.
Needed to do a Reset and now its stuck on "After Reset, Cannot get past "Link your phone and PC".
I send a text to my cell phone and when I click on it, it opens to Edge browser app which was already installed.
I'm signed in to my Microsoft account and there's nothing directing me anywhere.
PC meantime sits there with the Link to......"
I've used the Lenovo restore to factory and still have the same thing after it starts loading.
Haven't had any luck with the Microsoft W-10 forum. Appears I'm not alone.

Can after full reset - Microsoft Community

So far striking out with Lenovo also.
What bootable app can I create that will allow my to view the Product Key. If I get that, I can install from the latest .iso and hopefully avoid that start glitch.

Pete

Answer:After Reset, Cannot get past "Link your phone and PC"

Make sure you do not have any external USB Mass Storage drives attached to your computer, like your Phone.
You can download Belarc Advisor or Magical Key finder to view your Windows Product key.
Your product key should be installed in the Bios and you should not need to input it. if you download the Windows 10 ISO 1709 and burn it to a USB Flash drive with Microsoft Media Creation tool or Rufus, in my signature. You can boot from that, choose your Language and choose Repair Your Computer. If that still fails. then you can do a Reinstall.

1 more replies
Relevance 89.38%

Hi All, need some help here. Windows 8.1 possible to permanent display "Reset Password" button on logon screen? Current setting u need first enter an incorrect username/password, only the button will be displayed.

Thank you....

More replies
Relevance 89.38%

Well, I have a big problem. I have a laptop that was manufacturer by TOSHIBA with Vista Home Premium OS. And I haven't used it in awhile, so I kinda forgot the Windows Login Password. It's only one account on it, the "Administrator" account. So the problem is I need to login on that laptop, but sadly, I didn't make a "reset disk" for the password on it. Is there anyway I can ever log back onto it? Please Help.


KenzCM

Answer:Windows Vista Login Password Forgotten - No Reset Disk Was Made: "Needs Help"

Originally Posted by KenzCM


Well, I have a big problem. I have a laptop that was manufacturer by TOSHIBA with Vista Home Premium OS. And I haven't used it in awhile, so I kinda forgot the Windows Login Password. It's only one account on it, the "Administrator" account. So the problem is I need to login on that laptop, but sadly, I didn't make a "reset disk" for the password on it. Is there anyway I can ever log back onto it? Please Help.


KenzCM



Kenz

Do you have the vista DVD? If so you can boot from the dvd and during the setup there is a key combo (shift-F10) that varies from mfr to mfr. That will get you to the command prompt. You may not need to run as admin but just in case this is how>>>> ( right click the top bar and run as admin) type net user administrator /active:true

that will enable the built in hidden admin account. reboot logon change password.

Let us know if this doesn't work

Ken

4 more replies
Relevance 88.97%

i have read your reply here for same question so i want to know if u can help me too
http://en.community.dell.com/support-forums/laptop/f/3518/t/19492860.aspx
Srvice Tag No. : <Admin Note: removed per privacy policy~RK>
DELL INSPIRON N5010

I am owner of my Dell INSPIRON N5010 , but i m not from USA , my computer hanged so my friend just restored its BIOS setting( i am not sure if these are called BIOS, but it happened as: he restarted Laptop, pressed F12 and there he restored settings then when it restarted there appeared a black screen in middle of which there is a blue box saying "Insert system password" Now i tried looking over internet all over the place I found out a few reasonable solutions 1- remove a battery with motherboard , but for that you need an expert for which my laptop might have to opened which i prefer not to get opened 2- second provide your service tag(S/N) on dellpasswords.com but that asks for $35 which i think is just too much! Now I want if the second one can be done for free or anyother viable solution thank you

Answer:My Dell N5010 shows a "insert system password" when i reset my BIOS Setting! need help?

Hi,
Please share the system's Service Tag and Owner's Name and the exact message you get with the code via private message (click my username and then click Start Conversation). I will try and check if a master password can be generated for this to help you reset the password.

2 more replies
Relevance 84.05%

I went to the following link (from the "Please read here first..." thread) http://thespykiller.co.uk/index.php?action=tpmod;dl=item10 but was unable to find a download for "hijack this". Does anyone have an alternative link to find Hijack this?

Thank you

EDITED:

A message appeared saying this website wants to run 'ietag.dll' from Microsoft Corp. Is that ok?

P.S. The problem is an increadibly SLOW start up time and "fairly" frequent freezing of the screen (enough to be very frustrating). The computer never goes into hibernate either and I've set it up to do so numerous times. Sometimes, after clicking the IE icon, nothing happens until I click it again a few minutes later. However, it then opens up 2-3 IE windows instead of the original one that I wanted.

I can't get a hijack this log because I can't find the hijack this download. Does the download via the described link, show up for other people?

Dell Dimension DV051
Intel P4 2.8GHz
2.79GHz, 504MB RAM
Windows XP Media Center 2002 SP3
 

Answer:Can't get "hijack this" program from link in "Please read here.." thread. Help please

Found & ran the program with the following results: (P.S. I realize you're all busy so please don't take this the wrong way --> It looks like the "Please read here first..." thread needs updating).

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:34:57 PM, on 6/2/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\iaanotif.exe
C:\Program Files\CyberLink\PowerDVD\DVDLauncher.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\Dell Photo AIO Printer 924\dlccmon.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\Yahoo!\Search Protection\SearchProtection.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Digital Line Detect\DLG.exe
C:\Program Files\McAfee Security Scan\2.0.18... Read more

1 more replies
Relevance 84.05%

Can you scan a link to see if the page it directs to has any virus's or threats? Thanks.
 

Answer:Is there a way to "scan" a link to a website or page to see if it is a "threat"?

There are some tools you can use.

First is WOT if you don't use it. It gives you a decent indication on whether a site is safe. Its an addon for your browser. Just download for whichever one you use: https://www.mywot.com/en/download Green circle means good, Red means you probably shouldn't go onto the site. Yellow...proceed with caution

Another thing you can do is go here: https://www.virustotal.com/
-Select URL and paste the site address on there. It'll list a number scanners and if they come up clean.
 

2 more replies
Relevance 83.23%

Hello

how can I delete "saved password" and "form data" of microsoft
edge manually ?!

after too much search in google ....

I trid to delete some value of the following registry address
HKEY_CURRENT_USER\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wek yb3d8bbwe\MicrosoftEdge\

also I tried to delete some files in the following folder
%LocalAppData%\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\

and finally I could not find the way ...!!!

please help !

Answer:delete "saved password" and "form data" from microsoft edge manually

Hi,
Welcome to the forums, go to settings (... dots from top right), click view Advanced settings and "Manage Saved Passwords".
HTH.

6 more replies
Relevance 83.23%

Hello

how can I delete "saved password" and "form data" of microsoft
edge manually ?!

after too much search in google ....

I trid to delete some value of the following registry address
HKEY_CURRENT_USER\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wek yb3d8bbwe\MicrosoftEdge\

also I tried to delete some files in the following folder
%LocalAppData%\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\

and finally I could not find the way ...!!!

please help !

Answer:delete "saved password" and "form data" from microsoft edge manually

Hi,
Welcome to the forums, go to settings (... dots from top right), click view Advanced settings and "Manage Saved Passwords".
HTH.

0 more replies
Relevance 82.82%

How do I remove "Smart Card" and "McAfee Password" icon from the logon screen.

Hi I was wondering if someone can help please?

I've been stuck on this problem for months and can't seem to resolve it - I was wondering if anyone knows how i can remove the smart card icon (without disabling the card itself from device manager) and the mcafee password icon - please see below.

any help is appreciated - Thank you very much

Answer:How do I remove "Smart Card" and "McAfee Password" icon from the logon

which windows install in your PC?

14 more replies
Relevance 82%

I guess I must have inadvertantly changed a setting somewhere. I don't want to fish around and mess things up. Please help...
 

Answer:Link "hand" displays an "X" & won't connect

Please explain your problem a little better and please give details. What link displays an x?
 

2 more replies
Relevance 82%

Ok, this is my third attempt, after re-booting and re-booting. This is my wife's Sony, abt. 3 years old, P4, WinXP HE, 512k ram. For a long time now it has been "temperamental". Among the latest is I can no longer "switch user" as normally. Clicking Start/log off/switch user does absolutely nothing now, it merely reverts to the former screen. Start/log off/log off does work, however.
And the shortcut that I used to use, the Win logo key +L now goes to "UNLOCK COMPUTER", a pop-up message that tells me the pc is in use and locked and only I (presumably as an administrator) with the proper password can now unlock it..
Problem: what the heck is the password?
We don't recall ever setting one.
Control+Alt+Delete does nothing here. Once at this screen, my only recourse is to reboot. ("Cancel" is greyed out. I think though that a few days ago it wasn't and I could cancel. Is that my faulty memory or is this thing getting worse?)

A side note: I did recently download and utilize a reg cleaner freeware "Regseeker" which I used to delete only several items it said were not used or broken links. (It also allegedly created a back-up before deletion, but darned if I can see where or how I can get them back!)
I also disabled, thanks to another tech "advice", several services via Control Panel/Administrative Tools/Services. However, that techie claims nothing I disabled in his list should affect this.

Thanks!
 ... Read more

Answer:Solved: "Switch User" no longer functions. "Password"?

15 more replies
Relevance 82%

Vote for this suggestion
windowsphone.uservoice.com/forums/101801-feature-suggestions/suggestions/6478870-add-never-and-only-on-startup-options-in-the-d]Add "Never" and "only on startup" options in the drop down menu of "require a password after" option of lock screen setting. ? Feature Suggestions for Windows Phone

Answer:There should be "never" option in "require password a after" lock screen setting.

I personally think this option is about as niche as something can get.

2 more replies
Relevance 81.59%

I have a dsl line and W98 SE. I am having problems with the "Work Offline" message whenever I go online. I tried fixing that by changing the values in Webcheck registry key to "auto". I don't have "Loadwc.exe" in my startup but I have changed it to "DoNotlLoadwc.exe" in windows/system anyway just to be sure. However, everytime I restart or launch IE, the "Loadsens" value in Webcheck resets to "yes". There is something other than "loadwc.exe" that is resetting my webcheck but what is it?

There are no items in my "dial-up settings" and no items checked in LAN settings.

Please help. I am at wits end. Thanks in advance.
 

More replies
Relevance 81.18%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

Answer:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Relevance 79.95%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

Answer:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Relevance 79.95%

In order to make AD driven user's password request to be resolve automated. we wanted to have reset link or button on windows log-on screen, please guide incase same functionality is available or we need to customize windows.
Whenever the situation come that use forget his/her password or lock after expire date then we want user should reset his/her password from window's log-on screen. So to customize and put reset password screen on Log-on screen please give any idea if functionality
is already available or any program if already written by someone...

Thank you in advance

More replies
Relevance 78.72%

When I open a link in email, outlook open another window "Locate Link Browser", but not open IE or default browser. How can I fix this?
 

Answer:link in outlook open "Locate Link Browser"

Set the default browser for your user profile

http://windowsxp.mvps.org/defaultbrowser.htm
 

3 more replies
Relevance 78.72%

Links in Outlook open another window, not IE. How can I fix this?
 

More replies
Relevance 78.31%

O/S: Windows 95
Internet access via Modem using "Dial Up Connection" to ISP. The dialogue box includes two options (a) "Save Password", and (b) "Connect Automatically". They are always greyed out and can not be selected or activated. As a result I always have to type in the password though I would rather not have to.

What I need to know is (1) why are these options not selectable and how can I get them to activate? and (b) what exactly does "Connect Automatically" do?

thanks.
 

Answer:How to "Save Password" for "Dial Up Connection"

Do you get the Window logon box when you bootup? If so, do you just cancel it? That will ususlly eleminate password control. One simple thing you can try is go to Start>Find Files and Folders and do a search for *.pwl. If you find a file with a anyname.pwl, right click on it and rename it to old.pwl. Reboot and if you get the Windows logon, enter a name or number dont set a password. Let us know if it works or not.
 

1 more replies
Relevance 78.31%

hello all.

I just got my new pc with MS Windows 8.

I tried to set up the "People" app and I keep receiving an error which tells me that "Your password has changed. Please enter your password." Howvever there is no place to re-enter my password nor did I change my password.

Since I get the error my Facebook and Gmail contatc will not synch.

Anybody had this experience? How do I fix it?

Mike

More replies
Relevance 78.31%

Favorite Passwords: "1234" and "Password"

A statistical analysis of 28,000 stolen passwords showed that many people are inept when it comes to choosing a password. If your password is something as lame as 1234 (or anything else that easy), you?ll get no sympathy from anyone when you get hacked.

It found that 16 percent took a first name as a password, often their own or one of their children, according to the study published by Information Week. Another 14 percent relied on the easiest keyboard combinations to remember such as "1234" or "12345678." For those using English keyboards, "QWERTY", was popular.

Answer:Favorite Passwords: "1234" and "Password"

Its kind of silly for that to be a password though, but I know a person or two who think password is such an easy password that nobody would guess it...

I use password for an e-mail account that I just use for signing up for stuff like newsletters, game sites and stuff haha

9 more replies
Relevance 77.08%

I can't copy and paste "User name" and Password" in Windows Mail (Vista 64 bit SP2)

I have already try both mouse and keyboard (ctrl+c and ctrl+v)

I would like to know how to setting then I can copy and paste "User name" and Password" ?

Kind Regards,

Answer:I can't copy and paste "User name" and Password" in Windows Mail (Vista 64 bit SP2)

I'm no expert, but I'd imagine it's a security measure.

1 more replies
Relevance 77.08%

I have a W7 32bit laptop and I do not have MS Office installed. I have been using Hotmail until a couple weeks ago when I was "converted" to outlook.com email - which I like OK. When I'm using a browser - IE9 in this case - and when I click on "send link as" or "send page as", it launches Windows Live Mail and puts me in a WLM output email. I would instead like it to launch me into outlook.com and an outlook.com output email. How can I do this - or can't it be done at all?

If I've posted to the wrong board plz let me know which board to post it to.
Thank you in advance for your help.

Answer:Outlook.com vs. WLM when "send link as" or "send page as" is clicked

How to Make Windows Live Hotmail Your Default Email Program - About Email

5 more replies
Relevance 76.67%

I notice in some group, if I share a story from that group, let's call it GroupABC.

So say I read a story in GroupABC, and I want to share it, I click the SHARE button,

then I click the name of the person or another Group that I want to share with

it has a "via GroupABC" (Remove) on it

so if you share it on say another group or a friend's page, it would read:

my name via GroupABC

then the story (link)

======================

now, how do you to that "Via GroupABC" trick?

Is it w/ this trick:

http://www.hongkiat.com/blog/customize-facebook-status/

or is there another way to do it? As they ask me for my phone no. or cr. card
 

More replies
Relevance 76.67%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

Answer:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Relevance 76.26%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

Answer:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Relevance 76.26%

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

More replies
Relevance 75.85%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

Answer:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Relevance 75.44%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

Answer:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Relevance 75.44%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

Answer:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Relevance 75.44%

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

More replies
Relevance 74.62%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

Answer:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Relevance 74.62%

MODS MOVE THIS TO THE RIGHT SECTION IF ITS IN THE WRONG?..thanks!

help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird....

i have no clue on what to do.. im stuck at a screen that says this





?..? said:



"Server Infomation"
"Select the type of incoming server you are using"
"[_??_] POP [_??_] IMAP"

"Enter the name of your incoming server (for example, "mail.example.net")."

"Incoming Server: [___????????????????___]"
______________________________________________________________________

"Uncheck this checkbox to store mail for this account in its own directory. that will make this account appear as a top-level acount."

"[_??_] Use Global Inbox (Store mail in Local Folders}"

"Enter the name of your outgoing server (SMTP)(for example, "smtp.example.net")."

"outgoing Server: [___????????????????___]"Click to expand...


 

Answer:help me please! about "POP""IMAP""SMTP" incoming/outgoing mail server for Tbird...

afaik hotmail does not provide pop\imap or smtp for free you may get it if you pay for the hotmail service but i would not recommend you do that just so you can get pop\imap or smtp

hrrm tbird and hotmail from the thunderbird faq
Can I access my Netscape WebMail or Hotmail accounts through Thunderbird?

No. Netscape WebMail and Hotmail use proprietary protocols. To access WebMail directly through an e-mail client requires you to use Netscape 6+ with AIM; to do so with Hotmail requires either Microsoft Outlook or Outlook Express. Of course, you can access your WebMail account on the Web at http://webmail.netscape.com/, or Hotmail at http://www.hotmail.com/.
 

8 more replies
Relevance 74.62%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

Answer:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Relevance 74.21%

On an admin account, if I want to, say, download/install a program, UAC will ask for confirmation, and clicking " yes " will get it to start downloading.

I wonder if I can make the system asking for password instead of giving the option of " yes " or " continue ". Like it does to a standard user account.

Thank you.

t-4-2

Answer:Password required instead of clicking " yes ' ot " continue "

You should enable the policy "User Account Control: Use Admin Approval Mode for the built-in Administrator account", and then you must configure the policy "User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode" to use either "Prompt for credentials" or "Prompt for credentials on the secure desktop". Note the behavior of this last item depends on how you've configured "User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop" or "User Account Control: Switch to the secure desktop when prompting for elevation" - I personally don't like using the secure desktop with a multimon setup, so I disable "User Account Control: Switch to the secure desktop when prompting for elevation" on my machines. All of these policies are in GPEdit > Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options. If you're using a version of Win7 without a local policy editor (your specs say Win7 HP, so it's possible) all of these settings are backed by registry values, documented on Technet here.

3 more replies
Relevance 73.39%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

Answer:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Relevance 73.39%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

Answer:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Relevance 73.39%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 73.39%

Hey there...I found a folder that I've never seen in my D partition before...I partition my hdd into 3 parts...C=OS installation...D=Programs and Games...E=Misc downloads and music and pr0n ...

Well I've never had a virus or anything in my D partition before...I just found this folder named "winnt" and it had some bat files and some kind of Airline JScript and something that looks like an airplane tracker...

Then in a folder named sdata (still in the winnt folder) there's files like 911, police, air, fire, etc...OMFG!!! This is like some terrorist thing or something...FBI is gonna find me and I'll never see the light of day again!!! I'll miss the [H] and I haven't even watched LOTR Extended Platinum Collectors DVD thing (the big ass package with those book holder things)...I haven't even completed Doom 3 or started playing HL2 or even had a chance to buy an X-Box and play Halo 2!!!

AHHHHHH!!!!!! WTF is this crap on my computer??? I'm gonna delete this...I should delete it right??? Scans say it isn't a virus but what do they know...I'm screwed...

THANX
C'YA
 

Answer:OMG!!! Found some folder with files like "911" "police" "air" and a airplane tracker!

if youre os is on C: there shouldn't be a winnt dir on d:, should be safe to delete it.
 

7 more replies
Relevance 73.39%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Relevance 73.39%

Windows 7 Home Premium

I would provide a screenshot (or three) however that is at the crux of my problem - I should perhaps say my current problem...now, with "7" (I am beginning to tire RAPIDLY of 7, much more quickly than I did with either XP, or Vista).

PROBLEM: When I attempt to "Save As" a document (Notepad, for instance), or even a Paint image, I get a window/page/screen/whatever, that has no "Buttons" ... no button to "Save", no button to "Cancel". Simply NO BUTTONS???

I had this problem the other night, and we "faked" or cheated our way through it, by using the Enter (Return?) Key to advance the cursor (cursor??) to where we wanted to be (well, we "hoped" we were "there", anyway, since we could not "see" what button or drop-down dialog box was selected or highlighted).

It's almost as if I had a "Resolution" problem, whereby the resolution is set too low (say, 800 x 600), things are too big to be seen/won't FIT on the page. However, my resolution is set to the "Recommended" 1366 x 768.

Please help...this Netbook would be a WHOLE LOT easier to throw against a wall than my desktops ever were . . .

Thanks in advance,
glenn . . .
PS, Hoping I was/am clear here...under the drop-down boxes of "File Name" and "Save as Type", there is nothing to select - not "Save" or "OK" or "Cancel" ... NOTHING????... Read more

Answer:No "Buttons" to "Save" or "Cancel" in Dialog Boxes WIN7

Hi,

Type dpi into the Search box and choose "Make text smaller or larger" at the top of the search result list. In the window that opens see what it is set to. You want it at 100% rather than 125% or 150%. So if higher than 100% change it back to 100%. Hit Apply. You will need to reboot. See if that helps.
 

5 more replies
Relevance 73.39%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

Answer:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Relevance 73.39%

Please help review my HijackThis File. My computer has problems with "Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups".

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:46:28 PM, on 10/24/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal

Edit by chaslang: Inline HJT log removed. READ & RUN ME FIRST. Malware Removal Guide sticky not followed.
 

Answer:"Redirected Searches", "Advertising Pop-Ups", "Fake Anti-Virus Pop-Ups"

Welcome to Major Geeks!

Please read ALL of this message including the notes before doing anything.

Please follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide
and attach the requested logs when you finish these instructions.

**** If something does not run, write down the info to explain to us later but keep on going. ****
Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.
After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!
Helpful Notes:

If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:

Starting your computer in Safe mode

If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
If you cannot seem to login to an infected user account, try using a different user... Read more

5 more replies
Relevance 73.39%

Hi, my sister dropped off a gateway MT3432 laptop and when i turned it on, nothing works, It starts up but nothing shows on the screen. I hear the system booting up and spinning off the hard drive but cant get to the BIOS screen or nothing. I tried plugging in an external monitor and still nothing. I don't know what the deal is. Plz Help. I replaced the ram and the harddrive and still doing the same thing.

Answer:GATEWAY LAPTOP WONT BOOT """"HELP""""

Did your sister say she had did anything to the machine?  Played with registry? dropped it?

3 more replies
Relevance 73.39%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

Answer:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Relevance 72.98%

At present I have my WIN 7 set to Boot up without a Password. I would now like to change that siuation back to a "Password Required" Boot.

How do I go about this ?

I have tried going into User Accounts >Change Passwords where I get the three boxes "Current Password", "Change Password" and "Confirm New Password" all blank as expected.

Its what happens next that has me puzzled.

I tried leaving the "Current Password" blank , entered a new Password into the "Change Password" box and re-entered this into the last Box .

I now get the message " The password you typed is incorrect. Please re-type your new Password"

What to do here ?

Answer:How To Change a "No-Password" Bootup Back to a "Password "Bootup ?

You might have windows set up to not require a password or automatically login (stored password), so you still would need to enter the password you had entered when installing windows. This is just a guess though don't hold me to this

4 more replies
Relevance 72.57%

If I set the BIOS "system password", does that actually set the SATA password?  I am using Optiplex 7040's combined with Intel SSD's that leverage the SATA password to encrypt the drive.

Answer:Does setting the BIOS "system password" actually set the SATA password?

No. The two passwords are completely separate.

1 more replies
Relevance 72.57%

So I've enabled password protected sharing for Windows 7 (for my first computer).

So now, when I used my second computer to access my first computer's shared files, it obviously prompted me with a password.
My question is, I don't know what's the username and password for that. I was wondering if someone can help me to find my username and password (or guide to reset this password) so my second computer can access the shared files with my first computer while preserving the password security.

Answer:How To Change The Password On "Password Protected File Sharing"

Use the username and password that you use when you log onto the first computer.

If that does not work, try
user = computername\user
password = password

...where computername = the name of the first computer.

1 more replies
Relevance 72.57%

I'm putting in the password so i can be on my wifi when I'm at home. The phone is telling me my wifi password is incorrect.
I know it is correct, what do I do?

Answer:My password for my home's wifi is "incorrect", but I'm putting in the right password?

Are you sure you connect to your homenetwerk?
Maybe it's the netwerk from the neighbors because there SSID is about the same.

2 more replies
Relevance 72.57%

Hey, since few days i have a problem regarding internet browsing . if i click a link or open a page there are like 80% chances that a unknown and unauthorised search engine to redirect me to a specific kind of pages with games online or search sites etc. i scanned with my avast home edition antivirus and get a result regarding some trojans. i choose the option to delete them. then i scanned with superantispyware who found something like SYAURISC.DLL Trojan.Agent/Gen-JeJe .

After online scanners with bitdefender and eset. and Malwarebytes' Anti-Malware . and 0 viruses on all reports, i STILL have the same problem..

Today I also experienced 2 bluescreen events .

I use windows 7 ultimate [evaluation copy] , here is the result from DDS.txt file, and i attached ark.txt and Attach.txt so you may take a look.




DDS (Ver_09-12-01.01) - NTFSx86
Run by filip at 18:25:50.15 on 24/01/2010
Internet Explorer: 8.0.7100.0
Microsoft Windows 7 Ultimate 6.1.7100.0.1252.44.1033.18.2038.1104 [GMT 0:00]

SP: SUPERAntiSpyware *enabled* (Updated) {222A897C-5018-402e-943F-7E7AC8560DA7}

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\sys... Read more

More replies
Relevance 72.57%

I tried to find an existing thread about this but couldn't.

I have two computers set up in a home network. One is a desktop running XP Pro x64 Edition. The other is a laptop running XP Home. Both have SP2. The desktop has Eset Smart Security which has antivirus/firewall/spam blocker. The laptop has Eset Antivirus which has no firewall or spam blocker and uses Windows Firewall. They connect through a Dlink DI 524 Rev C Router. The router firewall has default settings. Both computers have Netbios over TCP/IP enabled and each has the IP address of the other one set up as a WINS Server.

Each computer has files that it shares with the other. The desktop shares it's printer with the laptop. The files that show up in "My Network Places" share correctly and the printer works.

The problem is after I restart the laptop with the desktop running the "View workgroup computers" link in the desktop gives this Error Message:

"Mshome is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."

I can't access the workgroup computers.

The shares in "My Network Places" and the printer still work. Everything works right in the laptop.

Then if I restart the desktop with the laptop running everything works correctly again.

I have tried this with a stand alone Antiviru... Read more

Answer:Solved: "View workgroup computers" link fails after restart

7 more replies
Relevance 72.57%

Recently setup a new desktop and after installing Windows 7 and setting up I noticed my user folder is named "UsersFiles" in my start menu (as well as on the desktop). The folder path itself is correct and I've tried creating a new user but that user has the same issue. If I can't fix this without reinstalling I can just hide the links and ignore it but I would rather fix it. I've poured over search topics, registry entries, and other options but just cannot seem to find a solution.

Answer:start menu user folder link named "UsersFiles"

Hello and welcome greatwroth mate if you haven't already try these in safe mode
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2
if no go these might be worth a run just to eliminate the basic stuff
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(If you are running Kaspersky security it might rant about ADW just ignore to or disable Kaspersky for the duration of the ADW scan)

3 more replies
Relevance 72.57%

I ran an ethernet cable from one of the back of the modem to the WAN port on the back of the TP-Link wireless router. (TP-WR541G) I then power cycled the modem (about 3-4min) and then plugged in the router. Now I can't get an internet connection when connectiong through the router. The router's status page says that the router is "Obtaining network parameters..."

The router's leds indicate that everything is running fine.
PWR= Solid Green
SYS= Slowly blinking green
WLAN= Blinking Green
WAN= Fast blinking green
Port 2 (PC)= Solid green

Network connections in control panel indicates that the network is connected and firewalled.

IPConfig:

Code:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Owner>ipconfig

Windows IP Configuration
Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

C:\Documents and Settings\Owner>

 

Answer:Solved: TP-Link wireless router "Obtaining network parameters..."

7 more replies
Relevance 72.57%

Hey everybody,
Thank you for the help in advance. I have my computer set to hotmail as my server when I want to send an email link to a page I am on. My address book does not automatically fill in when I address the sendee. How do I do this, and/or how do I change it to gmail, where I believe, (whether correctly or not,) that the address book will populate when I type the first few letters of the sendee's address? Thanks again for your expertise. Nike

More replies
Relevance 72.57%

My google skills are failing me. Someone introduced me to content controls, which are lovely, and when I asked them if it was possible to fill in one and have the others auto-fill, they showed me how using "paste as link" could do that, as long as I refreshed (I made a shortcut to "update all links" on my quick access toolbar and use that). My first question is, I have just been using the default "as:" selection of "HTML Format" when using paste as link - is there any reason to switch or will that work best?

My second question is that I had some trouble once I thought I had it right. I'd get the file working fine, set it as a template for future documents, and as soon as I did that I'd get "Error! Not a valid link." when I tried updating links. I finally (I think?) narrowed it down to the fact that I was changing the name of the file (I'd take one of my existing templates, make a copy with the word 'test' on the end, try out the paste as link thing, and if it worked like that, I'd delete my old template, remove 'test' off the new filename, and that's when it stopped working). Is this right? If so I'm wondering if there's a quick fix to make the links work again, or, if I decide to change the filename in the future, do I have to re-"paste as link" the entire document?

Thanks for your help.
 

Answer:Word 2013 - content controls and "paste as link" behavior

bump
 

2 more replies
Relevance 72.57%

Somehow I've lost the file association between .htm/.html and IE/Firefox. Firefox is my default browser, but when I click on an html link in an email (Outlook Express) the window that opens is "Compaq Owners Documents," rather than a Firefox window. I've tried re-installing Firefox with no improvement. This APPEARS to have begun right after I installed IE7 Beta (although I seldom use the program). Firefox operation seems to be normal otherwise. Any ideas how I should track this down? Thanks --
steve
 

Answer:Clicking on a link in Outlook Express brings up "Owners Documents"

Don't know if this will help or not.

Open your Control Panel, double click on Folder Options, review all your settings. Pay attention to the tab File Types. Review all of the File Extension Types. Look for the file extension that you are having problems with. Click on the Advanced button to review the settings. You may find your problem by accident like I did once. If not, I'm sure some of the experienced members will be able to help.
 

2 more replies
Relevance 72.57%

CNN.COM/HLN announced earlier today that an E-mail message has appeared in the wild that contains a link and tells E-mail recipients they can watch a video of Casey Anthony's "confession" about the death of her daughter, Caylee.

Clicking the link allows hackers to place malware in your computer and possibly gain access to personal information.

-------------------------------------------------------------------
 

Answer:Warning! E-mail With Link To Casey Anthony "Confession" Video

I think I saw that on Facebook yesterday. Only the O in Anthony was a 0 (zero).
 

2 more replies
Relevance 72.57%

Normally when you try to send an email from a link from firefox via "file->send link", your default email program automatically opens assuming it's not already open. If Outlook 2010 is already open, no problem; it works fine. If it's closed, I get the error below about a dll error telling me to reinstall outlook 2010. if I manually open Outlook, I can then email the link.

If I insert the Office 2010 disc to try a repair, I get an other error (below) saying 2003 was not uninstalled properly and to uninstall it before I can do the repair (gotcha-catch22-can't get there from here, etc....). I see nothing in add/remove to indicate there is a trace of Office 2003 remaining. I can send screen shots of the registry if desired, but see nothing there indicating 2003 was not removed fully, but could be wrong. I'm fine with surgical edits if necessary.

I've been running Office 2010 for a year with no other problems beyond this and it's possible this existed from day 1 and it just took me a while to notice it..

Any suggestion on how to either fix the dll issue directly, or deal with the 2003 uninstall hopefully without uninstalling 2010 and starting over?

Thanks.
 

More replies
Relevance 72.57%

Hi - I need help please. When I Google something and click on the link from Google it either redirects me to another site (not the one I requested) or it says there was an error and it cannot connect to "c.enhance.com". I've run Spybot, McAfee, Avira, and removed some things but still the redirecting continues. And it's always when I click on a link through another page/search engine (does not redirect if I type in the link directly into the address bar). If you could help I would SINCERELY appreciate it as I have no idea what to look for. Attached is the Hijack This log I ran tonight. Thank you in advance for all your help!
~ Katherine
--------------------------------------------------
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:15:50 PM, on 3/25/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Avira\AntiVir PersonalEdition Classic\sched.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\VIA\VIAudioi\HDADeck\HDeck.exe
C:\Program Files\McAfee.com\VSO\mcvsshld.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\McAfee.com\VSO\oasclnt.exe
C:\Progra... Read more

Answer:Redirect happening - "c.enhance.com" when I click on a link through a search engine

7 more replies
Relevance 72.57%

Full title of tutorial is Link Microsoft Account to Windows 10 Digital License Windows 10 Installation Upgrade Tutorials

We have a bunch of Win 10 Pro systems. All were upgrades from Retail Win 7 or Win 8. Three systems have just one Win 10 install each, and one multi-booting system has three separate Win 10 installs, in separate disk partitions. All these upgrades were created with just local accounts (for privacy reasons).

Last week, I re-installed the motherboard in one system after a repair (same board, just some chips replaced, maybe?) I had to re-activate. And with only a local account, I had to do an activation over the phone. I don't want to risk losing a license, so I want to get all these systems covered in a Microsoft Account before something else goes wrong.

So I read this this entire tutorial and I would like to validate if the following are true for the Creators Update:
I can still use my local account for my daily work, as long as I create a separate admin account that I use to link the digital entitlement to a Microsoft Account.For that separate admin account, the password that I use to log into my system has to be the same as the Microsoft Account.If I have more than one admin account on a system, only one admin account can link that digital entitlement to a Microsoft Account.I can use just one Microsoft account to register with Microsoft all the digital entitlements across all our systems. That is, I can "manage" all my entitlements ... Read more

More replies
Relevance 72.57%

I get this error upon trying to start the Norton UnErase Wizard. What does this mean?? I really need to use the program... It sounds like it's trying to make a net connection? Why would it need to do that? I have no firewall up and the Linksys router allows all traffic... BTW I am using XP Home.
 

Answer:"Could not make communication link with Norton UnErase Protection Sevice"

Hello Stiltz,
Symantec is aware of this problem but they do not have any solution to this at the moment. They are working at it.
Try searching the Symantec support centre after a few days. They might post it there soon.
 

2 more replies
Relevance 72.57%

Hi everybody,

I recently followed Microsoft to this wonderful Windows-10 offer.
I didn't much like it, so I restored an image made just before I upgraded to Windows-10.
Image is Windows 7 Home Premium 64-bit SP1
This image also contained the many Microsoft Nags telling me "I'm ready to go".

I thought I got rid of most of those.

Now I find that using the Windows Update utility still lists the "Upgrade to Windows10 Home" link, as an optional update. I don't want to do that.

My issue is: No matter how I try to ignore that link, (hiding the link, checkBox OFF), Windows Update will always begin with the "Upgrade to Windows-10" ... all 3GB of it.

So, if anyone can help me get rid of not only that Optional Update link from my life, but anything else that might be lurking, I would be grateful. As a matter of fact, I will choke down a healthy shot in your honour.

Regards,
Paul

More replies
Relevance 72.57%

Hi,

How do I stop Outlook 2003 from restricting FF42 "email Link"?

Had to re-install Outlook 2003 and now when I,m on the Web, when I select FILE> EMAIL LINK, there is no pop-up allowing me to select an email address in Outlook 2003 to send it to.

Must be hidden somewhere, looked for ?? to no avail.

Answer:How do I stop Outlook 2003 from restricting FF42 "email Link"?

Open FF Options (Menu > Tools > Options).
Select Applications in the left side navigation pane.
Scroll Content Type (right pane) down to "mailto" (without " ").
Click the down arrow to expand the drop box.
Select "Always ask" from the drop list.
CLOSE the Options tab.
Menu > File > Email Link... should enable the dialog box you are looking for.

Regards,
GEWB

2 more replies
Relevance 72.57%

Hi sevenforums users,
I was wondering if it would be possible to hide the "customize..." link from the window of hidden tray icons. Do you know how to do it?



vewiu

Answer:How to hide the "customize..." link from the window of tray icons?

Are you talking about the option named "Customize notification icons"?

9 more replies
Relevance 72.57%

Hi!

Looks like a pain in the butt thing we have here. Error Message says> "The procedure GetIUMS could not be located in the dynamic link library MSDART.DLL."

How to we get this back?

Sincerely,

The Gillette Family (Ron)
 

Answer:"...point GetIUMS could not be located in the dynamic link library..."

11 more replies
Relevance 72.57%

Howdy, folks.I right click a link (.lnk), click Properties, then click "Find Target" and instead of folder with the target opening an Open With box opens.  It has several programs suggested, but not explorer.exe.  I have to browse for explorer.exe.How do I fix this problem?

Answer: "Find Target" in link properties doesn't work

http://www.dougknox.com/xp/file_assoc.htm

8 more replies
Relevance 72.57%

I have a 2GB flash drive that I have been using regularly for the last 6 months. Today I copied some files off of our old Mac (OS9), but when I tried to open the drive on my laptop, I got this message:

Cannot find script file "F:\main.vbs"
* I can insert graphic files from the drive through other programs (I inserted a graph into PowerPoint).

* If I left click the drive and "explore" OR "Open as portable media device..." I can access all of the files.

* The (left click) option to open the drive now says `a(O) instead of Open. (the a is superscripted, but I couldn't get it to paste correctly).
I don't know if using it on the Mac had anything to do with it, but they did happen an the same time.

Any thoughts? As long as I can still use it, I suppose it's fine, but it would be nicer if I could just double click to open it.
 

More replies
Relevance 72.57%

How to get this Result
1234
5678
to appear in a word link to excel

In Excel I'm using a Formula like
=SUBSTITUTE("1234546","4",CHAR(10) & "4")

I have another formula which returns something variable instead of "123456" only if I can get this working with "123456" that will be a good start..

I have a link in a word doc and I'd like to have the line break appear in the result.
LINK Excel.SheetMacroEnabled.12 "C:\\MyFile.xlsm" MySheet!MyNamedRange \t \* CHARFORMAT

My field works only the result is always surrounded by double quotes
eg
"1234
5678"

not

1234
5678
 

More replies
Relevance 72.57%

My problem just appeared a few weeks ago. I have always accessed my internal back up hard drive through "My Computer" in order to save files to it or download from the slave to the master. I have gotten no error messages. I have replaced the IDE cable. I have switched both hard drives and no matter which one is slave, it is not detected. I have made them both "cable select" and it does not help. My system recognizes my external hard drive.

I have a VPR 240r, with 2.4 gigabyte, 1 gigabyte of RAM, XP Home edition. Current master HD is WD 320 and slave is the original WD HD 100. The external is a Seagate 120 HD with USB port and separate power supply.

The device manager recognizes the slave drive and says it's drivers are up to date and that it is functioning fine. Disk Clean and Disk Defrag recognize my internal back up HD and will clean and defrag. My Acronis Image 10 program will recognize it and I can clone or back up through Acronis. I just can't get "My Computer" to recognize it so I can utilize it. I'm no expert and any suggestions would be welcome.
 

More replies
Relevance 72.57%

In my IE8, the "Send Link by Email" Function No Longer Works.

What do I need to do to fix it ?


TIA

Answer:IE8 "Send Link by Email" Function No Longer Works...

Easy Fix... Do the following:

1. Click the start (orb) bottom left of your computer screen
2. Click "Default Programs"
3. Click "Associate a file type or protocol with a program"
4. Scroll down until you see "MAILTO" on the left side of your screen
5. Highlight or click "MAIL TO" (near the bottom of the list in all caps)
6. Click "Change Program" (upper right of same box)
7. Now you will see your choices of email programs, select the one you want to use and you are now all set.

2 more replies
Relevance 72.57%

IE6 upgraded to IE8
XP SP2

When attempting to "send link" or "send page" via email, IE6 and IE8 (upgraded to 8 in an attempt to resolve problem) produce error message stating that I need to set Outlook or Outlook Express as the default mail client. I use Thunderbird and have set IE to Thunderbird in Tools/Options as the mail client. Still, IE will not open Thunderbird when attempting to send a URL. Had this problem with IE6 and IE8 after upgrade.

Ideas?

Answer:IE6 & IE8: Will not open Thunderbird when attempting to "send link" via email

Ideas...anyone?

2 more replies
Relevance 72.57%

Have an issue with one of my browsers, SBC Yahoo in particular. If I get a web address embedded in an Email I can't highlight it and get to the site. The computer stops responding in the browswer application.

If I type an address in Word and then come back and click on it then it takes me directly to address.
So, in my particular application in paragraph one for some reason the link can't be made and the browers "not responding".

pete
 

Answer:Solved: clicking on internet link leads to "not responding"

I am not quite sure what you mean by one of my browsers
If that browser is Internet Explorer, try these and see if any help:

A) Start with the easiest and see if it works:
IE->Tools->Internet Options->Programs Tab.
Click Reset web settings button.

B) Make sure you disable all popup blockers and see if that is the cause.

C) One or more of the following DLLs might be improperly registered.

1. Quit all programs that are running.
2. Click Start, and then click Run.
3. Type regsvr32 urlmon.dll and then click OK.
4. When you receive the "DllRegisterServer in urlmon.dll succeeded" message, click OK.

5. Repeat, substituting each of these additional DLLs:
Shdocvw.dll
Msjava.dll
Actxprxy.dll
Oleaut32.dll
Mshtml.dll
Browseui.dll
Shell32.dll (Windows XP and Windows 2000 only)

D) If that doesn't work:
For Windows version (Win 98/ME/2000/XP) - Download iefix:
http://www.winxptutor.com/download/iefix.zip

It is a general purpose repair utility for Internet Explorer which repairs Internet Explorer by registering it's core DLL files. Additionally if it detects Windows 2000/XP as the Operating System, it runs SFC to restore missing or corrupt Windows system files.

Requires Microsoft VB6 runtimes for Windows 98/ME systems, download here:
http://www.microsoft.com/downloads/...61-7A9C-43E7-9117-F673077FFB3C&displaylang=en

E) Start->Settings-> Folder Options->File types Tab
Locate each of the 4 file types listed below. Click Edit and c... Read more

2 more replies
Relevance 72.57%

I upgraded the browser to IE 11, but since then in Technet thread, I click on "Reply" link button, it does not react. So I have to use Chrome to reply to a thread.
Do you have any idea ?

More replies
Relevance 72.57%

I tried to move my Documents folder to another partition, but stupidly specified E:\ instead of E:\Documents. I moved it back to the default location and fixed the Quick Access link but can't fix the folder link in "This PC".

The icon is E:\ instead of Documents, and it points to the E:\ folder.

How can I fix this? I assume I need the correct registry entries. I tried the tutorial to remove/restore the folder, but the hacks only hide or show the folder in "This PC". I don't want to remove/hide it anyway.

Thanks.

Answer:File Explorer: "This PC" Documents folder link corrupt

SteveX said:

The icon is E:\ instead of Documents, and it points to the E:\ folder.



On further investigation the problem is actually that the property type of the "folder" has been changed from a System Folder to a Local Disk.

Yes, I know I should have taken a backup, but in my defence I am working on what was my daughter's boyfriend's laptop and I just assumed System Restore had been activated (perhaps the upgrade to Windows 10 disabled it). Also, I did create a recovery drive but have only just discovered using it would delete installed programs and would probably return the laptop to factory state (Win 7) because there is an OEM recovery partition.

Does anyone know how to fix this? Please!

4 more replies
Relevance 72.57%

When I try to send a link or page by email in internet explorer, it does nothing. I have check to see if outlook is default, it is. I have change to Windows Mail to check if it is a problem with Outlook and Windows Mail does not work either. Any ideas how to fix this??

Answer:Internet Explorer " Send Link by Email problem"

Hello and welcome to TSF

Do you have these problems in any other browsers? Please try one of the below (both are free):

Firefox
http://www.mozilla.com/en-US/firefox/
Opera
http://www.opera.com/

6 more replies
Relevance 72.57%

I have a D-Link DIR-625 (H/W Ver B2, Firware Ver 2.23) and am trying to set up the Access Control so that I can restrict Internet connection from midnight til morning (to keep my teenage kids from staying up half the night on the Internet, Facebook etc!)

Anybody have any step-by-step advice on how to do this...?

I'm confused on how to set up (and combine...?) Access Control and Schedules...

I can step through the Access Control set up, but I don't see how I can get these controls to be set for time of day... The manual isn't very helpful on how to do this.

Appreciate any advice...
 

Answer:Help/Advice Setting up "Access Control" on D-Link Router

I see what you mean about the manual. Are you using the "Access Control Wizard"? The manual says that the only schedule you can choose is "Always." But the picture (page 37) shows a drop down arrow. Does the drop down give any other options? If so, what are they?
 

1 more replies
Relevance 72.57%

I have EMET 5.2 and am trying to update to EMET 5.5.   However, I do not have the original "EMET 5.2 Setup.msi" to perform the uninstall.
Can someone help point me to a working download location for EMET 5.2?

Thanks,
Eli

More replies
Relevance 72.57%

Hello
This is my first post so first of all HELLO .

Second i have a problem.
I installed internet explorer 7. But i didnt like it so i tried going back to internet explorer 6, But then i stated giving me a error like "iertutil.dll is missing" So i googled it.After reading about other people havING the same problem as me, I found out that i can download iertutil.dll from www.down-dll.com and copied it to c\windows\system32.Before i done this my desktop was gone..But after doing this my desktop have reapperied however im still having a problem.

Every time I try to open a program or do somethinG i get this erroe message "The ordinal 56 could not be located in the dynamic link library iertutil.dll" . I would be happy to reinstall windows but I have lost the CD.

Is there any way i could fix this problem.
Thank you
 

Answer:"The ordinal 56 could not be located in the dynamic link library iertutil.dll" HELP

Any one???,,,
And is there anyway i can reinstall windows without the CD.
 

3 more replies
Relevance 72.57%

Hi, when logging on I get the message "The ordinal 685 could not be located in the dynamic link library iertutil.dll". Only the wallpaper shows. Task manager opens fine. System restore, safe mode & last known good config continue to fail. I do not have a copy of the Windows xp professional disk. Any help would be much appreciated.

Answer:"The ordinal 685 could not be located in the dynamic link library iertutil.dll"

iertutil.dll is related to Internet Explorer. I'd error check the drive. I'd also install Firefox just to have it just in case. Then uninstall Internet Explorer, then reinstall it. Make sure to upgrade to Internet Explorer 8. If you need to run a system file checker ( sfc /scannow ) you can always borrow a CD from someone as long as it's the same version (home, pro, basic).

2 more replies
Relevance 72.57%

The link is still there, but nothing happens when I attempt to open it. I'm mystified as to what changed. Seems like I turned the machine off one night and next morning it was gone. No programs installed or uninstalled. No changes to machine configuration. Nothing different. Nothing else seems to have changed or gone wrong. Anyone have any suggestions?
 

Answer:"All Programs" link on Start button no longer works

Did you try a system restore or "Last Known Good Configuration"?
 

2 more replies
Relevance 72.57%

Hi everyone, thank you for taking a moment to read my thread. I have a problem with my TP Link WN722N "150 Mbps High Gain Wireless USB Adapter". I have used this adapter for about a year with no problems. Today, I turned on my computer, and my taskbar showed the icon for, "Not connected no connections available" I thought this was weird, so I unplugged the adapter, put it back in, same message. Tried a different USB port. Same message. Restarted, same message. Re-installed drivers, same message. Tried on a different computer also running windows 10, adapter works fine. Does anyone have any suggestions as to how I could troubleshoot my problem further?

Answer:TP Link Wireless Adapter "Disabled" in Control Panel

Hi Robby.

Can you see adapter in device manager? I saw the comment that you re-installed drivers.

Do your USB ports work for a mouse or a USB key?


Ken

1 more replies
Relevance 72.57%

Howdy, folks.
I right click a link (.lnk), click Properties, then click "Find Target" and instead of folder with the target opening an Open With box opens. It has several programs suggested, but not explorer.exe. I have to browse for explorer.exe.

How do I fix this problem?
 

Answer:"Find Target" in link properties doesn''t work

8 more replies
Relevance 72.57%

New member here so bear with me...........Lately, when I'm on a .com website and click the "contact us" button for more information, and it happens to be a link to a hidden email address, I get a blank blue screen pop up.   I can close the screen by right clicking the blank button on the bottom--then close--and it goes away.    After that, if I right click the "contact us" box in the web site and click "copy" then it puts the hidden email address on the clipboard and I can manually paste it in my email.    Is there a way I can go back to the way it used to be?Edit---Now that I've seen some sample medium-blue screens in a search, the blue screen I get is lighter and more blue/green if that helps.

Answer:Blank blue screen when clicking a "contact us" link

What does the blue screen say?What browser, version?

3 more replies
Relevance 72.57%

IE8 "Send Link (and Pictures) by Email" Function No Longer Works.

I have had this issue using other Operating Systems as well. I've had this issue using Firefox as well as different versions of Outlook (Express, Mail and now 2007)

I believe the IE/Outlook link gets broken after I ran ASC (Advanced System Care).

Is this an Internet Explorer issue or an issue with Outlook ?

How do I fix this issue ?

Answer:IE8 "Send Link by Email" Function No Longer Works...

Since you mentioned that you used advanced system care, I think that is causing the problem, turn it off. I would not use it in the future.

The only protection that you need, and toavoid many problems, is Microsoft Security Essentials. and Malwarebytes.You do not need anything else.

Just use the protection I have named and do the routine, easy maintenace.

If you need help just ask.

9 more replies
Relevance 72.57%

This question is not for my computer and I do not currently have access to the computer in question. My dad's computer is the issue. He has Windows 10 and is using Outlook. When I went to his home to help him clean up some computer issues, he showed me something I could not fix, nor can I find it anywhere online.
When he receives an email from, for example, a newspaper he reads online, it will give him a couple of sentences from an article and then the commonly used "read more" link. But when he clicks it, the document search box pops up in the top left hand corner, asking for a filename that is an executable.
When I hover over the "read more" link it shows the correct address to the newspaper's website. I tried using the "read more" link on other email messages that would connect him to other websites and the same thing occurred. I ended up putting a link to his newspaper on his desktop and told him to go there to read the articles he wants to read until I could figure out what is going on with his computer. If anyone has any suggestions I would be very appreciative. Thank you.
 

More replies
Relevance 72.57%

I am trying to embed sound on my wordpress blog, but I am not able to get a free

http : // site . net / song . mp3

link from any site or with a software.

Is there any way to get a direct link (....mp3) to a sound file? (Free)

Answer:How to get a free "http://site.net/song.mp3" link with a software ?

Most of the websites protect their content there is no way to a get direct link for an mp3 file (ex. myspace).

But if a website chooses to store an mp3 openly, you can get is easily.
For example this page here: How to Embed MP3 Audio Files In Web Pages With Flash Player

Open this page in Internet Explorer, Right click inside the webpage- View source (in other browsers menu line sounds simular) and just search for a link to an mp3. In our case that would be
Code:
http://www.labnol.org/assets/mp3/uno...yahoo-song.mp3
If you do not want to look inside the code you can install an plugin “Adblock Plus” for Mozilla Firefox.
It has a menu OPEN BLOCKABLE LIST ITEMS. You would be able to find an openly store mp3 there as well.

Link above actually has tips for embedding audio files in blogs.

2 more replies
Relevance 72.57%

Admin Tools shortcut is broken in Control Panel.
Also Computer>Right Click Context>"Manage" does not work

I can open 'run commands' such as: COMPMGMT.MSC, SERVICES.MSC & DISKMGMT.MSC from the start button>search window but I can not access the general AdminTools page from Control Panel.

Tried start>properties>start menu>customize> "use default settings" but that didnt do squat.

Plz Help. Tnx

Answer:Broken "Administrative Tools" link in Control Panel

Hello Brian,

These tutorials may be able to help with restoring the Administrative Tools folder, and fix Manage.

Administrative Tools - Restore Shortcuts

and

Manage - Fix "File does not have a program associated"

Hope this helps,
Shawn

3 more replies
Relevance 72.57%

In my IE8, the "Send Link by Email" Function No Longer Works.

What do I need to do to fix it ?


TIA

Answer:IE8 "Send Link by Email" Function No Longer Works...

  
Quote: Originally Posted by Katmandu


In my IE8, the "Send Link by Email" Function No Longer Works.
What do I need to do to fix it ?
TIA


Hi Katmandu, Welcome to SF,

First we need some info. What E-mail program are you using Outlook or Windows Mail ?? Which Domain are you using like Yahoo, G-mail etc.

- Captain

2 more replies
Relevance 72.57%

Hello,

I am new at the forums and I have a problem, I bought a linksys wireless adapter thinking it would work for my new vista computer 64 bit. Had problems with it connecting to internet, called support, told me to reinstall it, first time somehow I was able to install it, second time when trying to reinstall it wouldnt install! So i returned it to the store. Bought a D-Link Xtreme N Desktop Adapter. Tried installing driver, could not install it, when setup is complete it says "Couldn't find adapter, please insert adapter now" Called D-link support , told me to try it on my other xp computer, seemed to work perfectly there, but again I need it for my vista computer. Any ideas how to fix this problem? I need my internet to work.

Model No: DWA-552
H/W VER:A1
F/W VER: 1.10

If you need anymore information from me to find the answer, please let me know, thank you.

Answer:D-Link Driver install problem "adapter not found"

Have you made sure its in the pci slot all the way.

3 more replies