Computer Support Forum

use wireless & ethernet in mac in the same time

Question: use wireless & ethernet in mac in the same time

hi...i have a macbook and a pc.....and i have subscribed in 2 internet isps. one of them is just wireless network and the other one is DSL ....i was wondering is it possible to use both of them in my mac at the same time and reffer some of applications to one and others to otherone?

Relevance 100%
Preferred Solution: use wireless & ethernet in mac in the same time

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: use wireless & ethernet in mac in the same time

This thread, post #17 for Windows. Don't know if it would work for Mac.
http://forums.techguy.org/networking/849382-solved-how-do-i-specify-2.html

2 more replies
Relevance 61.91%

Hello,

First of all im not a professional on what concern networking and stuff, so ill expose my problem here in the hope of having a positive reply.
a wierd problem happened yesterday when i was connecting with my phone, pc, and smart tv...
everything was fine until 00:09 am in my country time, where i lost connection on my pc and phone (which were connected using wireless) and not the case for my smart tv ( which is connected using wired ethernet cable), misteriously, my router lights were green which means i haven't any problem related to connection, so it brings me to think about ip adresses being messed up or something,
i restarted the router several times , and i litterally get the connection back for like 30 seconds using wireless on my phone and pc, but after a while same problem occured,
now because i know how to get into the router settings, i used ethernet cable and entered the adress 192.168.1.1 and password of course, i checked up which devices were connected to my router ( if theres a hacking attempt or something) all i can see is my devices with individual ip adresses connected ( pc, phone, smart wired tv, printer ...) means there wasnt anybody at this time connecting, only my devices were there...

PS: all i can see in my pc is "unkown sereur" with a yellow ! after 30 seconds of course.

So please guys im asking to pay attention to this annoying problem and hopefully having a postitve reply.

Sincerly, Xtradip
 

More replies
Relevance 61.09%

I have an annoying problem.... and please forgive me as I am not to techy when it comes to computers. In our office we have our PC's connected to our inter-office network server via the Ethernet ports (Local Area Connection) with a hard wire to a hub, that in turn runs to our server. We also each have a wireless internet connection on our PC's via a USB wireless adapter. When we were using XP this was not a problem to have access to the server AND the internet at the same time.

When my PC died last year I bought a Dell Inspiron 560 slim tower with Windows 7 to replace my XP machine. The first problem I ran into was that I could no longer use the wireless internet connection AND the hard wired connection to our server operating at the same time. If I stayed connected to our server, I will not have a wireless connection. If I go into the "Local Area Connection" properties and "disable" the connection, I almost instantly get my wireless connection back. The big issue when doing this is if I leave our database program (ACT!) open while the server connection is disabled, I have to shut down ACT!, then restart it before I can connect it to the server. If I try to without closing and reopening it I get all kinds of errors.

So, in the mean time, I have just put a shortcut on my desktop that allows me to enable and disable the Local Area Connection when I need internet access.

A couple days ago, my boss's PC grabbed a virus that slipped past McAfee (... Read more

Answer:Can't use ethernet network connection and USB wireless at same time

Anyone?

2 more replies
Relevance 61.09%

I am having some issues. I am new to windows 7 and was very hesistant to switch. Work bought me a new computer and i had no choice. Here is my setup:

At work, we have multiple laptops running on Verizon Wireless 4g Air Cards. Our printer in plugged into a Netgear VPN Firewall. When running XP, i was able to be connected to the 4g Air Card and have the ethernet cord plugged in allowing me to print and scan.

The 4g Air Card connects via a "lan adapter"

With Windows 7, I can no longer do this. When i am connect via the air card, i have no issues. as soon as I plug in the ethernet cord, i dont have any internet connection. It says it is connected, but I cannot visit any websites. As soon as I unplug the ethernet cord, everything works fine.

Does anyone know of a fix to this problem? I am sorry if there is already an answer for this somewhere else, but I couldn't find it in the forums.

Thanks in advance for any help anyone can offer.

Answer:Using a wireless air card and ethernet cord at the same time

You will need to edit your routing tables in windows to tell it to route internet traffic over the wimax.

You might also be able to set the metrics for the cards setting the wimax card to 1 and the others to 9999. This may work but it most likely will be flakey.

1 more replies
Relevance 60.68%

I am able to connect hard wired to cable modem(ethernet) and at the same time to a wireless cable modem. Both are unique ip's, different cable feeds. Does anyone know if it's possible to take advantage of this to increase my throughput?

Cola, sc TWC-RR z29209

thank you
 

Answer:TWC both direct connect(ethernet) and wireless, same time diff ip's

Yes, but you'd need either a supported NIC (they are rare and expensive) or server software such as Windows 2003 Server. Client machines aren't designed for this.

courtney sends...
 

1 more replies
Relevance 60.68%

My w500 is always online. However when I staredt the first time using of  bluetooth, XP automaticlly installed some driver for bluetooth. When a driver roughly named" bluetooth LAN asess" installed, all my wireless and ethernet conection have been cut. The ethernet card and wireless card is still in the hardware list without yellow tag. But in the contral panal, in the network connection sub pannal, only bluetooth lan is there, both of ethernet and wireless dispeared. restart machine, install new bios, new driver for bluetooth, ethernet, wireless. still nothing changed. seems like XP only want use bluetooth to connect the net and failed. The network in my home is good, all other machine are online when my w500 droped with bluetooth starting. The bluetooth is useable with my handfree headset, that comfirmed I do have bluetooth hardware. Since T500 is similar to w500 and this subforum has more people, please allow me borrow this place  for posting. Please give me some sugestion and Thanks a lot!













Solved!

Go to Solution.

Answer:bluetooth first time start up terminated ethernet and wireless

BTW I already played with fn-f5 and hard switch. no help, plus ethernet should not be affected by those two.

2 more replies
Relevance 60.68%

When I plug in the ethernet cable I loose the wireless lan (anr thus my internet connection). How do I configure my Lenovo T410 so that it connects to the internet over the wireless network and at the same time is connected to the local ethernet network.I can only access internet through the wireless network.I want to access my local network at the same time (the local network has no internet access). Searched the forum and I just found questions about the opposite requirement./Jonathan  

Answer:T410 Wireless internet and 'local' ethernet at the same time

Hi and welcome to the forum!There is an option in Thinkvantage Access Connections which while checked chooses the best available connection, so I suggest changing it accordingly. Wifi and LAN can be connected simultaneously through network bridging, since I don't know much about it so I suggest searching the web or waiting for other experienced users to reply. In the meantime take a look at this:- http://answers.yahoo.com/question/index?qid=20091006000914AAytd5QHope it helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

1 more replies
Relevance 51.25%

if its even possible. I have a laptop with wifi and it also has a ethernet port on it, could I be connected to the internet via wifi and then send that internet out of the laptop's ethernet port to another device to give that device internet?
 

Answer:convert ethernet port on laptop to wireless ethernet bridge

yeah, it's called Internet Connection Sharing if you're running windows.
Posted via [H] Mobile Device
 

19 more replies
Relevance 47.97%

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

Answer:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

1 more replies
Relevance 46.74%

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

Answer:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

6 more replies
Relevance 45.92%

since my cable modem has an ethernet and usb port could i hook the USB to one comp and the ethernet to an other comp? thatd be cool cause i wouldnt have 2 buy a router. But it seems doubtful that i could, just want to know though, thanks.

I cut and passted this question that nobbody gave a answer to
Any body know? Does it just ccut bandwidth
 

Answer:usb and ethernet at same time?

Based on my answer to your other question I'd have to say no, it wouldn't work. But it wouldn't hurt to give it a try.
 

1 more replies
Relevance 45.92%

When both the wireless NIC and the physical Ethernet NIC are both connected to a network that has an active Internet connection, which one will the host use for network data?

Will it randomly use both to get data, or will it choose the faster connection?

Just a question I thought of today.

Answer:Using Wi-Fi and Ethernet at Same Time

There is nothing to be gained in what you suggest.

On speed alone, the ethernet connection is going to be quicker than a wireless connection.

I have tried what you suggest and discovered I was being plagued with dropped connections, which was rectified by disabling the wireless adapter.

3 more replies
Relevance 45.51%

Dear All,

I hope you can help. Recently bought a new LaCie Wireless Space.
I am connected to it as a wi-fi router to get onto the internet.
However, my Time Machine software will not recognise it as a time capsule.
If I search for it in Airport Utility I a message that says "Airport Utility was unable to find any Airport wireless device" etc etc. Yet I am currently connected to it on wi-fi.

Also, if I open Time Machine and "select backup disk" the following appears:
MyShare on "WirelessSpace (Time Machine)"
&
OpenShare on "WirelessSpace (Time Machine)"

But on selecting either of them the following message appears:
Time Machine can't access the backup disk "MyShare". (or "OpenShare")
The operation couldn’t be completed. (OSStatus error 5.)

Finally, if I go into my Disk Utilities , there is no LaCie Wireless Space icon in the left column
&
However, there is a Wireless Sace (Time Machine) icon under the "Shared" column when I click on the computers hard drive icon on the desktop, BUT is states "Connection Failed"

I really have no idea where else to look and what else to do - other than contact LaCie - but they have not got back to me now for 3 days.

Any ideas????
 

More replies
Relevance 45.51%

I am hoping to connect a Win XP and Ubuntu to an Orange Livebox with ethernet connections. The XP is very close to the Livebox and therefore no problem, however the Ubuntu machine will need a 25m ethernet cable. Will a standard cable do, or will it have to be shielded cable ( not normally available in France at those lengths)? Wireless connection is not an option due to the very thick walls of old French houses and my very limited understanding of the subject! Thanks for any help.

Answer:First Time Ethernet Connection

why not try using your mains wiring click here i have no experience of this myself, but it would save you running a cable

4 more replies
Relevance 45.51%

Hi, i recently updated to windows 10. I'm having some difficulties regarding internet through Ethernet on It. what usually happens is i am able to surf the Ethernet for around 10 minutes, then the ethernet adapter just quits on me. So i run the network trouble shooter and find you that it needs to reset the DNS, which it does successfully. After that my Ethernet doesn't work anymore till I restart the Laptop. my computer's wifi card is an intel wireless n 7260, and the other network adapter is a pcie gbe family controller.

Answer:ethernet becomes disabled after some time

https://i.imgur.com/03RJ4Fm.png
https://i.imgur.com/7WAN6T1.png
https://i.imgur.com/tefHIGx.png
It says ethernet is disconnected but it is connected to my laptop

2 more replies
Relevance 45.1%

Hi,

We have a situation that comes up fairly regularly.
It is in the HVAC industry.
We have a computer, usually running Windows XP (sometimes 7) it connects to the internet via an Ethernet cable (which connects to a switch or more outside of our control) It is normally set up to use DHCP. We also need to connect via an Ethernet cable to a (HVAC) microprocessor/controller that has a (settable) static IP address.
We have a computer ( varies ) with a single Ethernet port to which we have added a second Ethernet port with a pci card (Broadcom BCM5751 Netxtreme Gigabit PCI Express Ethernet Network Adapter Card ). (We are not allowed, by the establishment, to use a hub in this particular location)
If I connect one Ethernet port to the HVAC controller (with IP address 198.168.1.150 and subnet mask 255 255 255 0)and set it to a static IP address (say 198.168.1.151) The program finds and talks to the controller. If I connect the second Ethernet port (with DHCP ) to the network source I can connect to the internet. In fact I can use either one (the original or the added one in either position) for either function . When I go to internet connections ..both ports show connected .. BUT.. I cannot do both at the same time. I need to be able to log on to the computer remotely via the internet and have its program communicate with the controller through the second port. It seems that which ever function I initiate first works the second does not … I have tried reversing the connections and... Read more

Answer:tWO ETHERNET PORTS, ONLY ONE WORKS AT A TIME

7 more replies
Relevance 45.1%

Most days i power on my pc and both ethernet and wifi have that not responding yellow triangle beside them. If see this then usually it wont work for the rest of the day, and may or may not work the next day. There have been times when neither ethernet or wifi would work for a full week and im stuck using my phone hotspot. When i use troubleshoot its says, "One or more network protocols are missing on this computer", this is on windows 10. When i was previously on windows 8.1 the error would be, "Your computer appears to be correctly configured, but the device or resource microsoft.com is not responding". The WiFi works on everything else in my house so I guess it's a problem with my PC.

It has been like this for quite a while now and i have no idea how to fix it, so any help would be appreciated, Thank you

More replies
Relevance 45.1%

Hello,

I just ordered internet and recived my modem. With the company "Netscape". I got high speed DSL. Anyways everything worked fine. I set my modem up properly and than I used the cd-rom they had asked me to install before connecting the ethernet cable on the back of my pc. Anyways as I finished installing the software cd, I than hooked up the ethernet cable to the back of my pc. I could'nt get on the internet.

So I called netscape. The guy there told me to tell him the error number from the netscape program and told me that it was not the modem that it was my pc. He helped me make a new internet connection through the control panel and choosing network connections. Anyways after that he told me to see if what was listed under the network connections. I told him all that was listed was:

- Broadband

- & Dial Up (which he made me make)


He told me to look for something called LAN. He asked me if there was a header that said "LAN" in the white field. I said no. So all he told me was he could'nt help me any longer and that it was up to me to see a tech. What a waste of time. Anyways the last thing he told me was if I had a new pc. I told him no I have a pentium 3 (If you wanna know exactly what kind of pc I have look below at my signature). Anyways he said that the ethernet port controller or something like that must be turned off in the bios or not turned on in winxp (home edition). I dunno... He told me I could try and turn i... Read more

Answer:Just Got My Internet For The First Time! LAN/ETHERNET PROBLEM!

no not on the sys tray. neither in the network connections. like i said it appears on both only if i restart my computer and go into the bios and than exit discarding changes. basically not even touching anything in the bios. you have to remember i have a p3 computer. so i probably need to turn the ethernet thing on in the bios or o/s. i dunno how to do this or what the problem is. help!!!!!!!!

Now that its working. (though i had to do that restart bios thing). I clicked on the properties of the Local area connection. I name of it is:

- 3Com #C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible)

Under power management in the properties it has a checkmark next to "Allow the computer to turn off this device to save power"...

I dunno what to do! Why is it working sometimes and sometimes not?

Why does the LAN show up in network connections on some restarts after i go to the bios, and than not?

Why does the same happen with the local area connection on the sys tray.

Right now it says "Limited or no connectivity, Firewalled"

Like i said i have three different connections in the network connections window:

- Broadband (created with the cd-rom that came with the modem)

- Dial Up (created with help over the phone from the internet company)

- LAN or High Speed Internet (Only shows up on weird restarts. It's not there on every restart, which means I cannot use the internet when I turn on my pc)
 

4 more replies
Relevance 45.1%

If been wondering about something. What would happen if I plugged both my Ethernet cards into the lan at the same time. I f indeed this does not break my pc, would my connection be faster or something?
 

Answer:2 ethernet cards plugged at same time

7 more replies
Relevance 45.1%

Hello
I upgraded from windows 7 home premium 64 bit to windows 10. It took me 3 tries. I wasn't able to do it until I disconnected Ethernet. Unfortunately new windows crashes each time i try to connect computer to internet pluging in ethernet cable. I found the problem is caused by new lan driver installed by windows 10. I have intel 82578dc lan adapter. I tried to find solution, but I'm giving up for now and coming back to win 7. Maybe somebody experienced the same problem and knows how to solve it. Please advise

More replies
Relevance 45.1%

So I was reading the announcement today that new Macbooks will not have ethernet ports and it got me wondering if its time to replace the decades old ethernet port with something newer and smaller. I don't know the reasons why Apple is doing away with it; my guesses are either physical size, or its just that few people are using them any more in favor of wireless. All indications are that the next iPhone will have a microUSB port to replace the much larger standard Apple connector.

So my question is; is wired networking dead for non-server environments, or is it just time for an update to the the trusty rj-45 port?

Discuss.
 

Answer:Is it time to replace the ethernet port?

Wireless has gotten better but it's really hard to beat the speed, security, and reliability of a good ol ethernet port. Apple sells USB and Thunderbolt to Ethernet adapters for the machines that don't have port.
 

43 more replies
Relevance 44.28%

I was wondering if it was possible to use both the internal Ethernet port as well as the one on the dock at the same time.  Only one port shows up in network connections.













Solved!

Go to Solution.

Answer:Using Ethernet port on dock and on laptop at the same time

The Ethernet port on the dock is an extension of the port on the system. You can use either, but not at the same time.

1 more replies
Relevance 44.28%

Having the WIFI off and using the OTG adaptor and hooking up an ethernet to USB I have been able to have high speed hardwired ethernet connection to the tablet.   I would also like to be able to charge the the tablet at the same time, but adding in a usb hub has been unsuccessful.  I still receive ethernet, but the tablet does not charge.  In comparison the dreaded Apple iPad is capable of this and works flawlessly .  Just wondering if it is possible for HP as well.  

More replies
Relevance 43.46%

Hello,

I have inherited an office full of computers, left by the previous IT support guy that left no instructions, records, or paperwork of what he did for my client.

They have a time clock that is hooked up via ethernet directly to a secondary (pci) NIC inside the accounting computer. When their old drive crashed, I had to reinstall everything with no idea of the previous config.

I have talked with the vendor, (NOVA time) and they do not know how the previous guy had it setup either, they insist that there must be a switch in between the clock and the computer for the time clock application to detect the clock itself.

My brief conversation with the former employee revealed that he configured the secondary NIC on a different subnet (and thats all he said).
I think what I am looking for is the right numbers/settings to configure the secondary NIC with, so that the application detects the IP of the time clock.

The IP address of the time clock program is 192.168.25.239
The IP address of the computer is 192.168.2.210

I have no problem buying a switch, however, I want to know how to do this for future problems.

UPDATE: I have gained access to the clock via internet browser by setting up the NIC with the following settings
However the time clock program still cant detect the clock
IP Adress: 192.168.2.238
Subnet Mask: 255.255.255.0
Default Gate: left blank
DNS: 8.8.8.8, 4.4.4.4
 

More replies
Relevance 43.05%

So I'm going to set up a wireless access point to allow a small business to go wireless. I'm interested in something that will serve them well. It doesn't need room for expansion, as long as it can support 4 to 7 users right now (about)... not more than 10, though.

Do I need to go with something professional or will the regular Linksys WAP11 be enough?
 

Answer:Best wireless access point to support 5 to 10 wireless users at the same time?

for more than 3 users, avoid 11b.
get 11g equipment

for 7 users, go for a linksys WRT54G. its semi-professional in that it runs linux and can be flashed with modified firmware painlessly.

i'd recommend leaving it "open" to avoid hassles.
however, if its use needs even the slightest bit of security, use WEP.
 

10 more replies
Relevance 42.64%

I have a belkin wireless router that also has connections for 4 wired connections. I think I have to leave the first plug connection open for having a wireless connection for my laptop. Will the router handle more then one wireless device at a time, lilke 2 wireless computers?
 

Answer:how many wireless items can my wireless router handle at one time??

Yes, it should do - I have a D-Link DIR-855 and I often have my desktop connected and 2 laptops running wirelessly at the same time. And you don't need to leave one port unconnected either, wireless will still work even if all 4 are populated.
 

6 more replies
Relevance 42.23%

The office setup is wireless. When the printer throws a wobbly we're stuck until the support chap arrives. (They're good but busy.) There is an old Xerox machine which is not connected to the PC and is used for copying only. I checked the manual for this printer, online, and the connection to the PC is given as enthernet. I don't suppose it's as easy as plugging in an ethernet cable. Is it possible to connect this printer and use it in a wireless setup?

Answer:Wireless and ethernet

Depends on the model of the Xerox, the operating system and availability of drivers. I suspect that you may be able to connect it to the router by ethernet (not to the pc) and then use it. Are you sure that it is ethernet to pc?

6 more replies
Relevance 42.23%

should I enable the wireless when I want to use the ethernet, my wireless works fine, but when I try to connect with ethernet, either no connection or connection drops after a short time, It is a dell desktop with windows xp,with netgear switch, and comcast modem,with mac airport, I need to get my ethernet high speed working that I pay for. PLEASE someone help
 

Answer:ethernet and wireless together

If I am going to use ethernet for an extended time I remove an external wireless adapter or switch an integrated wireless off. But that's to extend the life of the unused component and to save the battery if on battery. If you are using a PCI wireless card with the desktop then disabling it is probably the best you can do. But that is not going to impact your ethernet usage, so it is really your choice.

Please show the following for when you have an ethernet connection and for when it has dropped ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

3 more replies
Relevance 42.23%

In my house i have a desktop computer connected to internet broadband via ethernet cable to a virgin set top box. I have bought a laptop and want to set up a wireless connection for it. If i want to do so, can i continue having my desktop connected via ethernet aswell as a wireless cable router?thanks belta

Answer:set top box wireless and ethernet?

Try getting a 4 port Wireless Cable Router, the sort that gets its input using an ethernet cable (not the more common ADSL Modem Router type)By plugging your existing ethernet cable from the Virgin box into the routers input WAN port then connecting to your desktop from one of the routers output LAN ports using another ethernet patch cable (routers usually come with at least one in the box) after that all you may need do is access the router setup page and turn on the wireless part but the manual will explain how to Cheers HC

1 more replies
Relevance 42.23%

Hi there,
I'm having troubles with our new router. I can connect via ethernet but not through wireless. I'm certain it's an issue with my laptop, as I've managed to connect several other devices without any problems. Any help would be appreciated as I've tried everything I can think of.

Below is the result of "ipconfig /all" with the ethernet cable connected.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . :... Read more

Answer:Ethernet Yes, Wireless No?

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last couple of years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.
If you post back the make and exact model of the router - we can advise how to disable the wireless security

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

If you post a reply here with the Make and EXACT model of your PC, along with the windows version you are running. we will see if we can find a link to the driver and will post a reply with the link here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved t... Read more

3 more replies
Relevance 42.23%

Hi,I would like to know wether I could change my present USB Wireless connection to the ethernet connection.At present I am on BT Home Hub Box connected with a "2WIRE" USB wireless.All is OK but I find using my webcam my picture freeze's upnow and again and my last word spoken repeats about ten times.I think it might be better to use the ethernet wire as I now have the Home Hub box closer to my P.C. I would like to just change over rather than have to re-engineer the system in case I want to change back,any help would be great.Sam Gee

Answer:Wireless to ethernet

You could just try sticking the ethernet cable in and removing the usb. If it does not work you will have to run the setup cd again. If this cause problems you can always run system restore to put you back where you were.

4 more replies
Relevance 42.23%

My local vet's PC uses the ethernet port to connect to Vetcomm through a router. Until now, normal internet access has been through dial-up. He now has broadband. I fitted a wireless USB adaptor which installed OK, but won't connect to his new BT router - it shows as 'disabled' and won't let me change to enabled.
I'm sure it's a settings issue, but never had to deal with a similar situation to this.
Grateful for any thoughts.

Answer:Ethernet OK, but no wireless

I believe that you have to enter the configuration pages of the Home Hub to enable the wireless.
This article should guide you through it.
This article explains how to log onto the Home Hub.

10 more replies
Relevance 42.23%

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

Answer:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

1 more replies
Relevance 42.23%

So my wireless works well and fine, but the only problem is is that it disconnects time from time and i'm trying to download a 15 gb file that has no resuming capabilities. I want to use my ethernet connection rather than my wireless, but the ethernet (local area connection) isn't showing when I go to Control Panel/Network and Sharing Center/Manage Network Connections. I only see Wireless Network Connection. I have a router and a modem. the router is a linksys cisco. And my cable modem is linksys wrt45 or something. How can I fix this? My other two computers are using the ethernet cables fine.

Answer:Wireless but no ethernet

Download and run VistaForums SysInfo Tool (Select All and export to a file) on the laptop you're having trouble with, and upload it.

Ed

4 more replies
Relevance 42.23%

So I just bought myself a new laptop (hp dv6910us) and I'm enjoying it thoroughly but I have a very basic question about what to use in terms of internet. In my apartment, I can easily connect to the internet through my ethernet connection or through the wireless. Both are smooth, fast connections. In terms of increasing the lifespan and battery-life of the computer, should I stick primarily to connecting through the ethernet or through my wireless connection? I have an Atheros AR5007 802.11 b/g WiFi adaptor and my processor is an AMD Turion X-2 TL-60 2Ghz with 3.00GB RAM. Running windows vista 32 Bit. It's a general question, not a pressing issue so answer at your leisure. Thanks.
 

Answer:Wireless vs. Ethernet

Not sure if anyone has ever bench marked something like that. But my gut feeling is that the wireless would draw a little bit more power but I have no evidence to back that up.
 

3 more replies
Relevance 42.23%

Simple question,

I have a Wireless network in my house, in my garage i have a workroom, with a 5port hub and no wireless cards. If I buy a wireless bridge, can i plug it into the hub and bind it to my network, to allow computers to be plugged into the hub and get an IP?

So in essense want to take a wireless source and convert it back to ethernet in a specific location
 

Answer:Wireless to Ethernet

I believe so. I have looked into doing this in my living room for my ReplayTV and future media server.


PS: You bastard
"The Car: 2002 Porche 911 Conv. ; PES Tuning ECU ; Brembro Grand Turismo Brake Kit "
 

7 more replies
Relevance 42.23%

A little confusion here - When I log onto my Verizon router page (that 198.xxx thing), I show many menus but the following 2 have me a little confused. One says "network connection" type is: Ethernet - I do have a yellow cable coming out of my Actiontec router to the pc so I get that. Another menu says "wireless settings" and this says "wireless" which I have set to WPA and the mode is 802.11g "only". Is this system wireless or ethernet or both? I would like to do the pc to tv connection for netflix movies at some point.. Am I all set with this configuration? (knowing I have to buy a box of some sort, Roku or Apple or something) and if I do have a wireless connection, can I connect the two without cables running from one to another? Hope that is all clear. Thanks in advance.
 

Answer:Ethernet or wireless?

Is this system wireless or ethernet or bothClick to expand...

both

you have a wireless router - and so you can connect to the router with a cable as you currenty are doing and other devices PCs etc or your PC can also connect with wireless
I would like to do the pc to tv connection for netflix movies at some point..Click to expand...

someone else will need to answer the netflix service

from what I can see on the website
http://www.netflix.com/HowItWorks#faq1
you can watch via a PC


http://www.netflix.com/HowItWorks#faq1
Can I also watch instantly on my PC or Mac?

Yes. Simply press Play on any TV episode or movie to instantly watch it online on your Internet-connected PC or Mac.Click to expand...

so you can watch directly on your PC without any other device - and then if you have your PC video output connected to the TV you should be able to watch on TV via PC

whats the make and model of TV
- what outputs do you have on the PC video card ?
- what inputs do you have on the TV

if you have HDMI on both - then you should be able to use that - although for some copyright materials you will only be able to display on the TV and not two monitors
 

3 more replies
Relevance 42.23%

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

Answer:One wireless, one Ethernet, can I use both?

11 more replies
Relevance 42.23%

Hi everyone

I dont really know whether this is really relevent, but I was just wondering. If I have both ethernet cable and wireless on one computer as 2 networks. Can I join up both of them to increase my internet speed or somthing. I tested both of them seperately and the ethernet cable was much faster than the wireless. My router is next to my computer. Can I have some tips. I will be putting some screenshots later.

Thanks in advance

Answer:What can you do with both ethernet and wireless??

  
Quote: Originally Posted by mw2


I tested both of them seperately and the ethernet cable was much faster than the wireless.


Surprise, surprise...

9 more replies
Relevance 42.23%

This is, perhaps, an extremely silly question, easy to answer as the Techguy says! I have been using a desktop with Ethernet LAN (Landline) for years. Now, I have a Dell Studio 15 Laptop with Wireless output signal. My question is, How do I connect the two, so that I can use the Laptop too through my land-line broadband connection? Do I use just a wireless router in between? Any type of Wireless Router, or, any specific type? Do I need to change anything in my desktop LAN setup?
 

Answer:Wireless to Ethernet LAN

6 more replies
Relevance 42.23%

hi, i am using a wireless connection but to play bf2142 well i need a wired connection. i have got an ethernet wire going from the wireless router to computer, and it works [i disable the wireless connection and i connect to the web through the wire]. but i want to use my ethernet wire as my PRIMARY way to connect to the internet, but still want the wireless connection active for my computers upstairs to connect to the web.

does this make sense?

is this possible?

thank you

denny
 

Answer:using ethernet instead of wireless???

15 more replies
Relevance 42.23%

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

Answer:One wireless, one Ethernet, can I use both?

Using Client OS (I.e. Not a real server like Windows 2008) you cannot use two Network Cards (does not matter wire or wireless) that are connected to the same Network (I.e. same Wireless Router/switch etc.).

You can use both only if they are configured to two subnets (Two independent Networks).
 

2 more replies
Relevance 42.23%

I need to know if this can be done. The situation:
Desktop has a integrated 10/100/1000 ethernet port.
-Apartment the owner lives in has Free Wifi for all residents.
-Desktop has no room for wireless card, is under warranty, and owner doesn't want to crack the case.


Is there a device that can be used to plug into the Ethernet - to a "hub" of sorts, to transmit wirelessly to get the free Wifi signal? (so internet browsing is possible upon this particular PC without voiding warrenty or paying for seperate net...)


if so... link examples or provide exact names. I am getting mixed results with Google.

I know some USB wireless devices are available for this - but those can get pricey, and the owners don't really have any open USB (so a hub would be needed on top of it... which is more money and probably more expensive in the long run.)

Answer:Ethernet to Wireless...

USB wi-fi would be the easiest and cheapest solution. Otherwise you would have to run an ethernet cable from your computer to the source router or a router picking up the signal - which doesn't sound like an option either.

Do you really not have ANY free USB ports?

3 more replies
Relevance 42.23%

I've just moved into my Halls at uni in London. We have to use a CAT 5E ethernet cable to connect to a socket in the wall. When we open a web browser we have to enter a username and password to be able to go online. I was wondering if there is any bit of Hardware which i could plug into the ethernet wall socket which would then broadcast that ethernet connection as wireless and if so if it is possible to protect the connection so others cant use the WIFI.

thanks
 

Answer:Ethernet to Wireless, is this possible?

When we open a web browser we have to enter a username and password to be able to go online.Click to expand...

That probably means that they want to restrict usage to one computer per connection and do not want wireless networks set up. So, please check with the IT department before doing anything, as it's not very hard for them to detect violations.

On the assumption that you will not attempt this unless it falls within the rules, you can use a Wireless Access Point (WAP). Use encryption, preferably WPA2-PSK, AES, but at least WPA-PSK, TKIP. Use a passphrase that cannot be guessed and does not include dictionary words.
 

1 more replies
Relevance 42.23%

I just installed a wireless card. but i want the Ethernet to have priority over Wirless how can i do that?

Answer:Ethernet and Wireless

It should do it automatically when an ethernet cable is plugged in.

9 more replies
Relevance 42.23%

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

Answer:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

1 more replies
Relevance 42.23%

i have got a [email protected] G-Gateway which plugs into the back of desktop pc through the ethernet socket. i also have a laptop that has a wireless card built in it.i have set it up so i can run BB on my laptop through the gateway and also my desktop can access BB because of the ethernet cable. My desktop doesnt have wireless card.I wanted to know if i can get the two pc's to see each other on a network, this is so if my laptop is being used inanother room they can see what i am doing on my pc and vice versa and i could also swap files between the two of them. I have tried to set up a network using the XP wizzard but it says that a network cable is disconnected from my laptop so it wont connect to my pc. i know that it is disconnected cos i want to use the gateway to talk to my pc through the wireless.can anyone help please?

Answer:ethernet and wireless together

You might get a better response by posting this thread in the Networking forum!If I understand you correctly your set up should allow you to Network in the way you want. You'll need to make sure the Desktop and Laptop are connected to the same Network - i.e they are on the same named network. Run the Network wizard on your desktop and note the exact names you enter, then select 'make disk' option at the end and place the disk (could be a USB Stick) in the Laptop and run the file created by the Desktop. You will have needed to select File/Printer Sharing when you first ran the Wizard.If you go 'Show all connections' and right click on the LAN card you can select 'Properties' - this tells you the protocols you have active (Client for MS Networking, File/Printer Sharing, TCP/IP).Finally check which files you have set for 'sharing'. Never share a whole drive on a WiFi network!Good luck!

2 more replies
Relevance 42.23%

I am with o2 and use their wireless router. I have used it wirelessly for the last three years because it was too far away from my computer. I use Windows 7 Home Premium 64bit and the internet connection strength at the bottom of the screen shows up to three bars (normally only two).
This morning I managed to connect to the router using a 5 metre ethernet cable and the strength has gone up to four bars.
I can't see the difference. A speed test shows the same speeds 2.6 down 0.7 up.
Would I be just as well off being wireless? What difference does the strength from two bars to four bars make?
I would appreciate your comments please.

Answer:Wireless or Ethernet

Interesting reading here enter link description here

6 more replies
Relevance 42.23%

Hi, I have a Pavillion dv7-1129 wm laptop. With Windows Vista Home Premium ... Amd Turion (tm) X2 dual-core moble Rm-72 2.10 GHZ...Ram-2814... 32-bit Operating sytem
Can anyone provide me with the drivers for the Wireless and Ethernet connections

Drives for a Realtek RTL8101 Family-PCI -E Fast Ethernet NIC (NDIS 6.0)

Thankyou
 

Answer:Ethernet and wireless

12 more replies
Relevance 42.23%

I have a Linksys BEFW11S4 4 port wireless broadband router with 2 x wireless laptops that can see each other and share files fine. I also have a PC which is hardwired to the router. All 3 machines have an IP address from the range I configured and all 3 machines can access the internet. The problem I'm having is that my hardwired PC cannot see the workgroup I have set up so therefore it can't see the 2 wireless laptops. The 2 wireless laptops can see the hardwired PC but cannot connect to it to view the shared folders.

I have switched all firewalls off, changed lots of config in the router, reset it to default, rebuilt my hardwired PC, pulled out some hair, changed network settings all over the place but just cannot get the hardwired PC to see the workgroup.

Any suggestions anyone ! !
 

Answer:! ! ! ! ! Ethernet Can't See Wireless ! ! ! ! !

Well, as long as all three are getting DHCP addresses from the same network, then the router isn't to blame, so, get it configured and leave it alone.

You say you've setup a workgroup for the laptops. That desktop machine also needs to be a part of that same workgroup. Then, you need to have the same username and password combination on the three machines, and then the desktop should be able to share files with the laptops.

And you definitely want the firewalls disabled until you get things working.

-Scott
 

1 more replies
Relevance 42.23%

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics, -1988 Mb
Hard Drives: C: 465 GB (273 GB Free); E: 5 GB (0 GB Free); F: 143 GB (0 GB Free);
Motherboard: MSI, H67MA-E35 (MS-7680)
Antivirus: Avira Antivirus

I used to access my home wireless with a Netgear N150 Wireless USB adapter. The device still works, because I use it for Roku, but my computer can't access the wireless network with it. As a replacement I installed a TP-Link 300Mbps Wireless N PCI adapter (TL-WN851ND). That hasn't worked from the start. During the course of trying to fix the problem, I changed at least 10 different settings, and none of them worked. Now, I've lost track of all the changes I made. What I want is to erase all of the previous settings and connections and act like my computer is fresh out of the box and has never been connected to the internet before. The TP-Link is what I want to use. Not knowing as much as everyone else on here about computers, I am assuming that the Netgear and TP-Link aren't the problems, and it is instead something with my computer. Is there some type of checklist I can go though step by step to see exactly what the problem is? I don't know if there is physically something wrong with my computer that I can fix by buying a... Read more

More replies
Relevance 42.23%

My BT HomeHub is in the same room as my PC and I have a wireless card.
I can also connect my PC to he hub using an ethernet cable. Which is preferable, also would one allow faster downloads over theother.

Answer:Ethernet Vs Wireless

A wired ethernet connection will always be more reliable than a wireless connection. In terms of speed, this is likely to be most significant in a Local Area Network where files are transferred between computers.
As far as the internet is concerned, unless you have a broadband connection of about 50Mbps, your connection from the computer to the router will always be much faster than your download internet connection, so wired or wireless makes little difference. Having said that, if you are running more than one computer "wirelessly", the available bandwidth is shared by them, unlike wired connections where each will have the full speed of the router's network switch, usually 100Mbps.

1 more replies
Relevance 42.23%

I'm having problems connecting my PC via ethernet cord to the internet. We just got cable today and one of our PCs has a wireless card, when the other one doesn't. My computer is the basic one with the specs in my profile. It only has a dialup modem. I don't know if I have to configure something to the router or modem, but when my computer is hooked up to the router(the internet still doesn't work then) all other computers on the network won't connect to the internet.

Any help will be appreciated!
 

Answer:Pc not getting wireless through ethernet

16 more replies
Relevance 42.23%

Hi

My W8 PC is connected to the Wireless Router by Ethernet Cable, the PC also
has Wireless connectivity; is it possible to connect to the Router with both at t
he same time and if I do will that improve internet speed?

Thanks

Daniel

Answer:Ethernet and Wireless

Your internet speed is determined by your provider and the package you have, it is irrelevant how fast your connection to router is as long as it is at least a little faster than speed to the provider. So you can not change the internet speed above what provider gives you.

2 more replies
Relevance 42.23%

Hey all im new here, and this is my first post.
First of all I have a DSL connection through my provider. I then have a NetGear FM114P wireless firewall/print server (router ) attached to the modem.

My computer is currently hardwired through the ethernet port in the FM114P router with two other computers connecting by WiFi.

What i was thinking, was loosing the ethernet cord and turning this computer in to a wireless connection like the other two, but if i do will i loose speed? This computer currently gets between 700-950 kbps., depending on traffic.

thanks
mausie
AKA foufymaus
 

Answer:Ethernet -vs- Wireless

9 more replies
Relevance 42.23%

Here's something that is causing massive loss of hair.....

My PC is connected to my router with a wireless card. I also connect my PS2 to my PC using an ethernet connection (the ps2 is "modified" and I use this connection to play music and video thru the ps2 to the TV).

Everything works fine with one exception. It seems like the wireless is not getting a DNS. To obtain one, I have to disable the ethernet card, connect to my AP, then enable the card. If I lose my connect with the AP (which happens sometimes, it's on the other side of the house and the signal is a little weak), then when it reconnects I have to do the whole disable/enable thing.

It's not a huge deal, but I do like my stuff to work properly and usually things like this are not problem for me, but this one really has me wondering. Anyone have any ideas?

Here's my ipconfig /all if that helps. What's odd is the ipconfig is *exactly* the same when I can connect and when I can't. So maybe it's not a DNS issue, but something else. But I am unable to connect to any web sites until I disable and re-enable the ethernet card.

Windows IP Configuration

Host Name . . . . . . . . . . . . : HAL
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Wireless Network Connection 3:

Connection-specific DNS Su... Read more

Answer:Ethernet and wireless on same PC

6 more replies
Relevance 41.82%

I'm not entirely sure if an Ethernet Bridge is what I think it is.

For example: Linksys WET54G Wireless-G Ethernet Bridge

In a house with 3 laptops, a desktop, 2 wireless consoles, all in different rooms and 1 router.

If I buy a Linksys (or any) Ethernet Bridge, and run an Ethernet cable from my PS3 to the Ethernet Bridge, would I get a:

- better than wireless connection? (Like LAN perhaps?)

or,

- a connection similar to a wireless connection even though an Ethernet cable is running from the bridge

What I'm asking is, does the Ethernet cable running through the bridge get me a better connection? Almost as if I was running the cable from the router to PS3.
 

Answer:Wireless Ethernet Bridge

What I'm asking is, does the Ethernet cable running through the bridge get me a better connection? Almost as if I was running the cable from the router to PS3.Click to expand...

No. It's still wireless based on the same technology (if you go with an 802.11g bridge), so you're going to be constrained by signal quality and the protocol itself either way. However you can use it to improve things if you use a newer 802.11n bridge (and AP) than the radio inside your PS3.

It's still wireless though and you may still have throughput issues if there's any sort of interference or congestion in the band.
 

8 more replies
Relevance 41.82%

I have 3 PC's (2 on XP and 1 on ME) and a laptop on XP. I am using a Linksys WRT54G Wireless router. The laptop is wireless. PC's are ethernet. All computers communicate with each other in common workgroup when I use an ethernet cable for the laptop. When I use wireless for the laptop, workgroup communication is lost with other machines. No porblems accessing internet with any machine, whether wired or wireless.

Suggestions?
 

Answer:Wireless and Ethernet in Same Workgroup

13 more replies
Relevance 41.82%

Just a simple question. My apartment complex has installed wireless ethernet. My desktop computer has a 10/100 ethernet card installed, but I suppose I need to purchase a wireless card. What am I looking at as far as installation? Does it slide into a slot, or would somebody who's never opened his chassis before be better of getting pro help?
 

Answer:Wireless Ethernet Card

The ones I have seen advertized just plug into the ethernet jack on the back of the computer....I dont have one but my best guess is check with the manager of the apartment complex to ensure you get one that matches their frequency.
 

3 more replies
Relevance 41.82%

I have just upgraded my Internet Connection to a 20Mb/s one. BT told me that my line should support between 7Mb/s and 11Mb/s but I am only managing 3.45Mb/s.
Currently, my PC has no Wireless Card, so it is connected to the "Home Hub" by a CAT5 Cable. The Home Hub is connected to an Extension Telephone Socket, about 20' from the Main Socket.
My Question: Would I be better off to stick a Wireless Card, or Dongle, into the PC and connect the Home Hub to the main Telephone Socket?
My Lappy has a neat little Wireless Dongle which works well through two walls. If I were to add a Powered USB Hub, to the PC, and plug the Dongle into that. Would it be OK.

Answer:Wireless or Ethernet Connection

The first thing I would suggest is that you connect the Home Hub directly to your main telephone socket with a filter. Extension Telephone Sockets are notorious for slowing down the connection.
You could get a wireless card or dongle for your desktop PC but it would perform better via an ethernet connection directly to your router. If you want to position your desktop quite a way away from the router you can buy a longer ethernet cable.

10 more replies
Relevance 41.82%

I'm running a Gateway DX4720-03 (manual: https://www.manualowl.com/m/Gateway%.../Manual/148002) with Windows 7 HP 64-bit and have a Nvidia GeForce 7100/nForce 630i card and a Linksys WRT 320N router. My problem is that I always thought that this desktop computer was wirelessly connected to the internet, but I just found out that it was connected via an ethernet cable. At the moment everything is working just fine (portable computer wirelessly synched with desktop, guests can easily access my wifi, no problems with the internet, etc), except when I try to set up my wifi camera as an access point and have the computer recognize it. It was at this point, after much, much research and fiddling, I discovered that my network was set up as a Local Area Connection using an ethernet cable. In fact, the router was never listed in Network (under Network Infrastructure) until I just now selected "Add a wireless device." But, when going to Device Manager, Network adapters has MS Teredo Tunneling Adapter and NVIDIA nForce 10/100/1000 Mbps Ethernet and under Network Infrastructure Devices there is MS Wireless Router Module...the Linksys router doesn't show up here even though I just added it. From all this manipulation, it should be obvious that although I can very handily tweak my browser (Firefox), maintain a clean computer, solve various computer related problems - with help from the various forums, I am truly at a loss when it comes to networking and wireless set up.

So,... Read more

Answer:Trouble going from ethernet to wireless...

Hi flycaster, have you tried prioritizing your wireless connections? Wireless Setting.pdf

9 more replies
Relevance 41.82%

13 Minutes Ago
Dear all,

I have read all (i think) homegroup topics here but none solved my problem.
Homegroup is working perfectly when both computer are connected to router by ethernet cable.

As soon as i unplug the cable from computer 1. None of the computer is recognizing the homegroup of the other.

I tried rebooting both computers. Leaving homegroup, rebooting create new homegroup >> nothing helps.

Both computer get internet, can connect to the router, both computer can see and share folders with each other via the the network sharing way.

Both ethernet & wireless connection show up as HOME NETWORK

I have executed the Homegroup troubleshooter on both computers No changes.

Any clues on this?

Many thanks!

Fish

Answer:HomeGroup OK via ethernet but NOT via wireless

I believe homegroup is tied to the network connection. Did you create a homegroup for the wireless network connection?

7 more replies
Relevance 41.82%

I was reading this thread on the steam forums and I know I have a realtek ethernet nic in my pc. I also have bad performance in tf2

My pc is connected to the internet through my wireless network though, which makes me think the above fix wouldn't work for me. Am I right, or does my wlan card interact with the realtek ethernet nic?

BTW, I'm posting here because most people on the steam forums don't seem to know what their talking about, at least when it comes to hardware.
 

Answer:Solved: Wireless through Ethernet NIC?

8 more replies
Relevance 41.82%

I have just gone on to Sky broadband today and I am quite ignorant on wireless connections.I have got it up and running using the ethernet connection.As I am running my PC on a fairly long phone extension(24feet),I wondered if I would gain speed by putting my router next to the master phone point at the other end of the room and using my wireless adaptor to make the "jump".

Answer:Ethernet or Wireless connection

I don't see how that would gain any speed whatsoever, even from a file sharing viewpoint (where the massive speed advantage of 10/100 or Gigabit Ethernet is obviously preferred to wi-fi). A good quality phone extension will suffer virtually no loss whatsoever, and certainly not enough to affect an average internet connection. I would happily take a long phone extension if it allows convenient Cat5 networking. A good 802.11g network will achieve c.15-30Mbits per sec, the Ethernet standards are self-explanatory, and even an ADSL Max internet service offers c.6-7Mbits at its absolute best. That's if you live next door to the exchange an happen to be the only person using it. So wi-fi versus Ethernet is not an arguement worth thinking about purely from a connection speed viewpoint. Therefore avoiding the extension will not have any gain.

2 more replies
Relevance 41.82%

Just built a computer and trying to get a wireless card that will work with Windows x64. Any hints, tips or advice? I have purchased 2 and they did not work with x64. Please help!
 

More replies
Relevance 41.82%

Hello all-

I am at my family's vacation home. For several years we have stuck to using dial-up here, part of the whole isolation thing you know, but recently decided to upgrade to the most basic DSL. I set up the connection and connected the modem (Lynx L-220) to a wireless-b router (Linksys BEFW11S4) and everything was working great for about, oh, maybe an hour. It started getting unbearably slow, worse than dial-up. So I connected to the router with an ethernet cable and it's fine, most of the time. I then disconnected the ethernet and surfed wirelessly, and it was also fine. So the wireless only would work properly if I had just used the ethernet. ?????????? That's odd.......

I tried pinging a few sites on ethernet and wireless to see what happened. I opened Firefox, tried loading a page (of course it wouldn't) and then typed ping www.google.com in command prompt. It timed out a few times, then get a reply and, low and behold, the page suddenly started loading. Now I'm really confused. The internet works sometimes, the wireless works sometimes, and the ethernet works sometimes. ?????

I'm certainly planning to call tech support, but as that is a big thing to attempt, I thought I'd post here first and see if there is anyone out there who perhaps can help me.

OMG OMG OMG

Edit: I have tried pinging and loading pages only connected to the modem as well. It still doesn't work properly. I guess it's not the routers problem, maybe ... Read more

Answer:Wireless fast only after using ethernet...

16 more replies
Relevance 41.82%

Hi guys ,I am facing the weirdest problem . when I m trying to connect my laptop using wifi , my modem get rebooted ..all light gets off (DSL,WLAN,Internet) automatically . is it any malware or what ? I have updated my BIOS , my wireless driver ..but nothing worked .nd when I m connecting using ethernet its working fine , modem working smoothly .
 

Answer:Wireless not working, but ethernet does

Hi Sssstud,

Please let us know the message you see when you try to establish a wireless connection to the internet. Is your computer able to detect wireless networks? What version of Windows are you using and what is the model and name of the wireless router?

Thanks and regards,
Babita G
#iworkforDell


For easy access to drivers, manuals and product updates, please visit our Support Site .
 

3 more replies
Relevance 41.82%

I have a Dlink Dir-655 Wireless Router. The two recommend cards are the DWA-552 and DWA-556. I wanted to know if I should go with any of these or another brand. Basically I want to know what would be a good wireless card to get for the Dir-655 router.

Also how do USB wireless card compare, is there a big performance difference?

Thanks
 

Answer:Wireless Ethernet Card?

Check out this setup.

http://www.bplustech.com/adapter/MP2W_6200.html
 

12 more replies
Relevance 41.82%

I have an Acer Aspire 7552G laptop running Windows 7 x64 that is having problems with connecting to the internet.

I started to notice the wireless and LAN connections becoming very weak, web pages would load slower, data would take longer to download, etc. This lasted for a couple weeks. As of now, I cannot get any signal, neither wireless nor LAN.

I normally use Google Chrome but have tried to connect through multiple browsers.

I have tried updating the wireless/ethernet drivers, and I have also tried uninstalling them all together and reinstalling them. Both to no avail. I have no idea how to resolve this issue and am hoping the tech pros here can help me out!

Wireless LAN and LAN vendors are both Broadcom and the drivers can be found here: Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7552G


*I am connecting to internet on a university campus.

Answer:Wireless & Ethernet LAN - Not Working?

How are you measureing the stregth of the ethernet connection?

Who is your ISP ?. . What Brand and Model is the Modem and Router?


Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error abo... Read more

16 more replies
Relevance 41.82%

Hi! My father has a wired ip camera in his shop for security (which incidentally is in wireless range of my flat). I have suggested that he ditch his broadband connection because the camera is the only thing that uses it and that I could connect his camera to my wlan. Am I right in thinking that a wireless ethernet bridge would be the solution? I have a Netgear dg834gt as my modem/router.If a bridge is the answer would this product suffice?click hereI would like to stick to netgear for compatibility issues.

More replies
Relevance 41.82%

I network an XP box and a 98 box via wired Ethernet. Currently, a DSL connection is shared via a Zoom modem with a built-in router (5651_X4_2_2) connected to a Linksys switch (EtherFast 10/100 5-Port Workgroup Switch EZXS55W).

Just bought a laptop with a wireless card installed and want to share Internet connection and files wirelessly as already done via wired Ethenet (between XP box and a 98 box). Laptop features VISTA Home Premium.

Instead of connecting the Laptop to the switch via a patch cable (to share DSL and files), thought maybe there's a type of Ethernet to wireless adapter product that simply plugs into a port on the switch that would in turn transfer a wireless signal to the laptop. Or not?

Thanks in advance.
 

Answer:Ethernet to wireless adapter

8 more replies
Relevance 41.82%

This seems to be a common problem but after trying all that is out there (repairing and reseting TCP/IP Winsock, random You-Tube videos) I'm stumped. Here is my info from my cmd's IP config when I'm online and when I'm offline listed after that.

*ONLINE*

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lisa
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-1D-72-3D-89-61
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::48a5:e32d:4169:1d0c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.84(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, July 24, 2011 10:55:52 PM
Lease Expires . . . . . . . . . . : Monday, July 25, 2011 10:55:52 PM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 268442994
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-0F-F2-AF-24-00-1D-72-3D-89-61

DNS Servers . . ... Read more

Answer:connect to ethernet not wireless

7 more replies
Relevance 41.82%

I have a cable modem hooked up to my router, and the ethernet cable from my router to my computer. internet and wireless were working just fine for about a month up until yesterday. it just stopped. now, either my ethernet will connect or my modem, but never both, which will not allow me to have wireless. i've tried resetting both the router and modem, but no luck. any help is appreciated. thanks
 

Answer:wireless and ethernet problem

7 more replies
Relevance 41.82%

Hello,I am currently having issues with connecting to the internet. I am using a T60, machine type: 2623 D6U and running Windows XP. Yesterday, I updated my Thinkvantage software, then immediately performed a backup of my computer using the Thinkvantage software.  After that, I tried to use the wifi and it would not even search for any surrounding networks. I then plugged in an Ethernet cable and again it would not connect. I have tried downloading driver after driver, but nothing will work. I meant to uninstall wireless card and then install it again after reboot. I rebooted and was able to get wireless through Windows network connection, but not thinkvantage. I checked device manager and my Ethernet network was gone, so I may have accidentally uninstalled that instead. I rebooted again and when went back to device manager, the Ethernet was back. Once I found out wireless was working I tried a Thinkvantage System update again, and noticed I could update my Ethernet. I clicked to download and install and an error came up with "was not able to download package" or something very similar.  So currently, I have wireless available through Windows, but not thinkvantage and no Ethernet is working.  Any suggestions on how I can get this working properly again? Network cards in device manager: Intel(R) PRO/1000 PL Network ConnectionIntel(R) PRO/Wireless 3945ABG Network Connection Thanks for your help! 

Answer:Wireless and Ethernet Issues T60

Hi there, Make sure you have this 4 drivers and software extracted to the drivers folder. 1) Thinkpad Power Management driver ( current version 1.60 )2) Intel WIFI driver ( current version 13 )3) Lenovo Access Connection software ( current version 5.5 )4) Lenovo Hotkey features ( current version 2.23 ) You can get them herehttp://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62928 Sequence:Uninstallation 1) Uninstall Thinkvantage Access connection - do not reboot2) Uninstall Intel WIFI sofware from Control panel> Add/Remove Programs3) Reboot the Thinkpad and make sure that the Wireless card remains as an unknown driver in device manager Installation 1) Install Thinkpad Power Management driver - reboot2) Install Intel WIFI Driver - no reboot required3) Install Thinkvantage Access Connection software - reboot By now the WIFI issue should be resolved4) Install Lenovo Hotkey feature to compliment the Access Connection software - reboot CheersProcom 

3 more replies
Relevance 41.82%

Hi - I just bought a notebook with built-in wireless mobility. I have Road Runner as my ISP on my desktop unit. Is there any other equipment I need for sharing my Internet connection with my notebook?
 

Answer:Wireless notebook & ethernet

6 more replies
Relevance 41.82%

Hey,

I have been thinking about setting up a wireless webcam to show live streaming video of my hummingbird feeder or aquarium. The way I would like to set this up and to have it connected (preferrably wirelessly) to my router, and then be able access it through the internet either through FTP or perhaps some other way.

I read that FTP may not be able to support live streaming video because of the bandwidth involved. If that's true, I guess I could set up a desktop unit to act as a server, but would like to avoid that.

Has anyone out there tried this before? What camera did you use and what problems did you have?

I'm using a Linksys WRT54G router connected to a cable internet connected at 100 Mbps.

Any thoughts?
 

More replies
Relevance 41.82%

So I've been googling this problem for hours now and I've finally given up and decided to ask for some help. My computer knowledge is pretty good but I'm not so great with all this internet stuff! I can connect to the internet through the cable but not wirelessly, despite it showing up as being available when I connect it tells me I have limited connectivity. Any help would be very appreciated, i ran a ipconfig and here are the results:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Cameron>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Cameron-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lan
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-1A-73-D1-54-E0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-1B-24-DA-23-52
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Add... Read more

Answer:Wireless Not Working But Ethernet Does

8 more replies
Relevance 41.82%

Hi guys,

In my office we have a windows server, 10 pc's and 3 printers. All devices are interconnected through a wired network. We have some business applications installed on the server and set up them to launch from client computers. As we are going to move to a new office space we have an intention to say goodbye to the wired network and make everything wireless. My question is will we be able to launch the programs which have being installed on server from client computers via wifi?

Thank you.
 

Answer:Transform Ethernet LAN in to a wireless LAN

8 more replies
Relevance 41.82%

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethnet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

Answer:New install no ethernet, but can get wireless

11 more replies
Relevance 41.82%

I am lookin for some advice on a networking problem. I have a hp pc connected to the net thru an ethernet cable with a wirless router from talktalk and vista os. I have an advent laptop connected wireless to the same router. Both recieve and connect to the internet fine. My pc can find my laptop and transfer files from it thru public but my laptop does not recognise my pc nor the printer on it, any ideas as this is driving me mad.
 

Answer:wireless laptop and ethernet pc

You cannot see Vista PC in network on the laptop, correct.
What is the OS on the laptop?
Can you ping the PC from the laptop by IP and Name?
Do you have a password at sign on for laptop?
If Vista PC has "Password protected sharing" on, you will need to set up an account on it with laptop's User name and password.
What is the exact make/model of router?
Make/model of both compuetrs?
What firewalls are you using on both machines?
Have you tried connecting with the firewalls turned off?
 

1 more replies
Relevance 41.82%

I usually switch off the wifi at work when I plug the ethernet cable into the laptop. Was wondering who is at work when both are plugged in and turned on? I'm guessing the wireless connection takes over and is the method running. But that's purely guessing.

i wasn't sure if this topic belongs in the 'hardware' or 'software' heading.
 

More replies
Relevance 41.82%

In my office upstairs I have my broad band modem and two PC's and two printers. I would prefer to have these hard wired (ethernet) connected.

Down stairs I want to set up a PC for my wife via a wireless connection and I would also like to be able to use a lap to from the basement from time to time.

Can any one suggest a suitable configuration.

I have a friend with a similar set up who uses Net Gear DG632 and Net Gear WPN 824, but don't know if this is the best option.

Any help would be appreciated.
 

Answer:Ethernet and Wireless Combined

There's nothing wrong with your friend's configuration. One thing that I'd be thinking about, is the fast that you're going down two floors with the wireless signal. You might want to orient the antennas in a horizontal attitude to get more signal up and down, since the normal radiated pattern is like a bow-tie out the sides of a vertical antenna.
 

1 more replies
Relevance 41.82%

My wireless was working fine... didn't touch anything and then it stopped.

My roommate can connect fine and I can connect with the ethernet cable.

I ran the Xirrus and it's not detecting any networks and i'm right next to the modem.

I did a system restore, ran a virus scan and no dice.

Any suggestions?
 

Answer:ethernet connection but not wireless

7 more replies
Relevance 41.82%

whenever i try to connect my laptop (windows 7) wirelessly , it does not connects to it where as the ehernet cable works fine with it. i am using beetle 450tc2 router. please help
 

Answer:my wireless not working but ethernet does

do any other devices work with your wireless ?
 

1 more replies
Relevance 41.82%

hi i just bought a new laptop with windows 7 os. i dont know why but my ethernet (MARVELL YUKON 88E8055 PCI-E GIGABIT ETHERNET CONTROLLER) connection speed is just about the same as my wireless (INTEL WIFI LINK 5100 AGN) i am so confused why my ethernet connection is so slow. With my older computers, ethernet was at least 2x faster...

Answer:Wireless and ethernet speeds are the same pls help

I'm afraid i don't know anythinge else about your setup.
Is the wireless router connected directly to the Ethernet router? are they combined? what are the brand and product names?
is this DSL, Cable, or Optical Fiber internet?

also, could it be that the other two computers were limited wirelessly to the speed of a WIfI G network, while both the router and the new computer are WiFi n compatible?

6 more replies
Relevance 41.82%

Hey is there anyway i could use my computer to get on a wireless network and then hook my computer up to a wired router and share the connection? id like to get on xbox live using my wireless.( its fast enough) thanks
 

Answer:Wireless to ethernet question

What is the nature of your Internet source?


 

3 more replies
Relevance 41.82%

My daughter is at uni, in uni accommodation, where they have wired internet in their rooms but no wi fi. Is there something she can use so that she can set up wi fi so internet can be accessed in the communal kitchen area?

Answer:ethernet to wireless converter

This > http://www.broadbandbuyer.co.uk/Shop/ShopSearch.asp?CategoryID=57
may be what she needs.

4 more replies
Relevance 41.82%

What would be my best bet for a Wireless Ethernet Bridge? Where I can connect it to a wireless network then connect multiple wired clients up. I've purchased wireless bridges before but I understand that many Access Point/Routers can now be configured to act as a bridge? Many dedicated bridges are pretty pricey so this seems like a good route. The bridge will need to be fairly robust however as a lot of traffic will flow over it, so I'd like to hear from anyone who has successfully used a bridge like this with a fair amount of traffic.

I'm looking to basically connect two houses together onto one large network via a wireless bridge. Currently I have a client station connected to the other house and that client then has ICS running. I've had some success bridging the wireless and wired adapters to try to create more of a true bridge and allow 2-way regular network traffic but that disables the wireless controls on the wireless adapter. I would like a simpler hardware solution anyway.
 

Answer:What is my best bet for a Wireless Ethernet Bridge?

I have used the Ubiquiti products at several locations to do what you describe... Low cost, designed to be used outdoors & robust! Available in 2.4Ghz and 5Ghz as well..
http://www.ubnt.com/nanostationloco

I have not used their new MIMO product yet, but it could be better if you need more bandwidth..
http://www.ubnt.com/nanostationm

Joe...
 

2 more replies
Relevance 41.82%

SInce I bought the HP Pavilion Notebook T1E85EA#A I have suffered from unreliable wifi. I had put this down to my router however I have replicated the issue on another connection/router. The wifi always shows as connected but the throughput seems to stop. I cant acess any web pages, cant access the router and unable to ping them command prompt as well. After a while it will suddenly start working again albeit the page loads will appear slow at times. Today I decided to try using ethernet as well however I have found this has exactly the same problem. Some of the diagnostics I have tried are as follows: Alternate connection method (ethernet)Alternate broadband connectionManually specifying tcp/ip settingsUpdating drivers (no new drivers found and the ones installed are from 2015), Tried from the HP software, windows update as well as in the device properties. Restoring windows back to factory spec but the issue continues. Is there anything else I can do to rectify the issue or should I send it back to HP?

More replies
Relevance 41.82%

Hi simple question.I have a Belkin 54 wireless/router and would like to know how I use the ethernet connection instead of going wireless, as I see that the latter is slower.I can see both icons wireless and ethernet and yet if I switch off the wireless how do I connect to the web using the direct cable connection?If I disconnect the elethnet cable I can't see the cable icon..

Answer:wireless or ethernet connection

>>> like to know how I use the ethernet connection >>> instead of going wirelessYou just plug an ethernet cable between the PC's RJ45 network port and one of the router's LAN ports. Unlike a "wireless" connection, you don't have to go through any procedure to "Connect" to the network.>>> I see that the latter is slower.Standard 802.11g networking has a nominal data transfer speed of 54Mbps, although in practice this is likely to be closer to 30Mbps. A wired ethernet connection to your router will run at 100Mbps. This higher speed is only significant for transferring files between computers in your local network, because even 30Mbps will be well above the speed of your broadband connection, unless you are on something like Virgin Media's 50Mbps Cable service.

3 more replies
Relevance 41.82%

My old Westell DSL modem died, and Verizon sent me an Actiontec model GT704WG. I have two desktops, both connected to the modem by ethernet cable, and a laptop, which uses the wireless capability of the modem. This worked fine with the old modem (until it died). I connected the cables to the new modem exactly as they were connected to the old modem. I'm now browsing happily on the laptop (i.e., wirelessly), but the desktops cannot connect to the Internet. Strangely, when I go to 192.168.1.1 on one of the desktops, I get the setup page for the old modem rather than for the new one, even though the old modem is now sitting in a box. The status of the lights on the modem is as follows:

power - green
DSL - green
Internet - green
ethernet - not lit (all four of them)
USB - not lit
wireless - green

All computers are running Windows XP, SP-2.

How could wireless be working, but not ethernet? Usually it's the other way around!

Do I, perhaps, have to connect the modem to one of the desktops by USB cable? My understanding is that it's not necessary. If it is, do I need a driver from Verizon? They did not send a CD with the new modem. Is the driver available on the Internet somewhere?

Thank you!!
 

Answer:Solved: wireless OK, but no ethernet

ethernet - not lit (all four of them)Click to expand...

I take that to mean the ethernet ports are bad (have you tried them all?) or the cables are bad.

This may be the correct user manual: http://business.verizon.net/Help/dsl/Default.aspx?case=c13947

Try the USB port unless your computers are:

"Note: USB LAN port is not supported with Microsoft Windows
NT 4.0, Windows Vista 64-bit, or Mac OS."

That unit is a modem/router combo. The USB port is not to the modem part; it is a special LAN port, so no driver or special software should be needed.
 

3 more replies