Computer Support Forum

how to share ISDN connection

Question: how to share ISDN connection

I have a Win XP Pro SP1 box and Win NT 4 box. The XP box is connected directly to an ISDN connection. Both boxes have ethernet cards.

Can I share the internet connection by connecting both boxes to a router, establish the internet connection from the xp box, then connect the NT box somehow?

Thanks.

More replies
Relevance 100%
Preferred Solution: how to share ISDN connection

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 57.81%

I am over at my brother-in-laws ay the moment and he has a brand new PC with a normal modem.The old one is connected through a BT ISDN USB cable.I know nothing of this. What does he need to transfer the ISDN from his old PC to the new one.

Answer:New ISDN connection

wee eddie--You might find something here click here with link to BT advice.

3 more replies
Relevance 57.81%
Question: ISDN Connection

Can anyone tell if you can run ISDN through a router so that 2 computers can be on net at the same time.

Answer:ISDN Connection

Yep!  The router may have it's own IP address and act as a gateway so that you may subnet the rest of your LAN (home network) to have as many computers as you desire connect through the one router.  Your ISP may be able to detect this and not allow you to use the router this way without paying for the additional nodes.Best regards,Doc

1 more replies
Relevance 56.99%

I recently upgraded to isdn with my telecom provider.Everything is o.k with the analogue side of things i.e both analogue telephone lines are working nicely. However, the digital side of things refuses to work. Any device connected to the isdn ports cannot connect to the outside world e.g isdn modem to my isp. Windows xp reports no problems.I have checked all cable connections and ran a loop back diagnostic check which reports 'no isdn connection available, check all cables or contact service provider'. This applies to all three computers I have tried and two seperate isdn modems. Is it possible I have a faulty isdn line ( or isdn box )?

Answer:ISDN connection problem

Are you using a wireless hub/modem?

3 more replies
Relevance 56.99%

i have a isdn line that i want to use to connect two computers (a and c) together. i have a third computer (b) that is allready connected to a through a seperate isdn line that uses a pipeline 50 to connect the two. i have a few questions. can i connect two pipeline 50's to the same computer so i can connect the third (c), if not i have a modem that is for the isdn line can i put that on computer a and use the serial port (thats what the connector is for the modem) to connect with computer c if i have it the same way?
thanks
 

More replies
Relevance 56.99%

I am running XP (all updates and SP1), and ISDN. At different times during connection - 1 - 20 hours, the conneciton itself freezes - the computer thinks it is connected, the icon is still displayed in the task bar saying the same, but no internet responses. If I open up the Connection dialog and click disconnect, that dialog freezes and the disconnect button gets stuck. If I end and restart explorer and try to reconnect, it freezes the start bar., so I have to reset each time this happens. It is not the modem because I have tried with an external USB and with an internal. I also experience this problem after a fresh install, so I have no idea how to resolve this or where the issue lies.. if anybody can shed some light I'd really appreciate it.. its sending my phone bills thru the roof since there is a once off charge each time I connect...
 

More replies
Relevance 56.99%

Guys,
I have 2 channels up and running (128kb) and things have been great for the past 3 months. Lately...I have been visited by HELL!
Question:
1) My outgoing e-mail is so damn slow. Its hitting as low as 20bps and any huge e-mail will be have problem getting out of the office. This kill my job queue and I am suffering from management bombardment.
2) Can I split my web browser and my e-mail transactions? I was thinking of dedicating a server as web browsing and another as e-mail transporter.

Help please......
Gracias
Keet

------------------
I am here to stay!!
 

More replies
Relevance 56.99%

Just got "upgraded" from 56k to ISDN by BT, using them as my ISP also.

We tested the connection & all seemed well, however 24 hrs later I find that my connection keeps being dropped, I can see that I'm connected but cannot send or receive any data, unless I reboot the PC, only to find after a few mins the same happens again.

Looking at the"display panel" utility that BT provide I see that my layer II state is FF, which according to BT means unknown problem preventing me connecting, the help file suggests disconnecting the USB cable & replugging it, this works for a few mins again, before I'm back to square one. Did any of that last paragraph make sense?

Any suggestions, other than re install the drivers etc. BTW no conflicts/problem devices, yellow ! marks in device manager.

Thanx MB
 

More replies
Relevance 56.99%

I'm using a 3com us robotics isdn pro TA to connect to the net with at 64k.. I couldn't but help notice in the little connection window in the lower right corner when I double clicked on it, under the recieved part, I'm getting a steady supply of errors. so far, 203 total, and its steadily climbing... now its 208.. Being that isdn is a digital connection what could be causeing this, I believed that it either works or doesn't work, not in between? Its connected to the computer via USB connection if that helps any... Its to 213 now...

Any suggestions? or possibilities?


(( if anyone wonders, I cannot get broadband at my current location )) 219 now... damn
 

More replies
Relevance 56.58%

I am trying to setup a connection to the internet using a LAN on a Windows 98 machine. I have installed my network card (with latest drivers), I have entered the DNS name and address, entered a valid IP address, I can ping the server's IP and get a response. I have selected connection through LAN in internet options in IE. I know its software configuration problem because I have had another Apple Mac running on the same Cat. 5 cable.

Can someone run through any problems they can see with what I have done. If not can someone list how you connect a Windows 98 machine to a LAN without a proxy server.

Thanks
 

Answer:LAN ISDN Internet Connection Problems

I believe your problem is manually entering the addresses. Normally, DNS is disabled on W98 clients on a LAN connection. Why not enable DHCP on the server and just let the computer do all the heavy lifting?
 

1 more replies
Relevance 56.58%

Hello everyone, New here but here goes.

I have a PC at home and a 3 PC peer-to-peer setup at work. (just file sharing - No server stuff). I have used PCanywhere to connect to my office until it became apparant that users there were a little inconsiderate when it came to leaving the host on at the office. From there I went to straight forward dial up networking when I needed to synchronise.

All stations are Win2k Pro.
The PC at work is on a BT Speedcard (ISDN)
My home PC is also Win2K on a BT Speedcard (ISDN)

No problems.

I now have the opportunity to get ADSL (Exchange upgrade heading my way)

I have been told that as ADSL is not dialup that I will not be able to connect directly to my office using the telephone number provided on the business highway and that the connection would be software dependant.......Step back in.....PCanywhere.

I cannot change the office setup to ADSL as we rely on the different phone numbers it makes available

So, there's the problem.

I have read through the manual and found that ADSL must use the network connection and the TCP/IP Protocol.

The office (and home) don't have a static IP address.

Will I need to optain a static IP address at least just for the office or can PCanywhere handle such a connection anyway.

Can anyone therefore tell me or help me with a configuration to get....
My home (ADSL).Connected to...............
My office (ISDN)

Pleeeeeeeeeeeese!
Regrds

Dean
 

Answer:PCAnywhere ADSL to ISDN connection

the only assistance i can offer is to point you in the direction for a static domain redirector, which could, technically, be used to give you your remote ip address from whichever end you are at. you would need to use IIS5 on both amchines and get two redirector's, create a default web page on each machine that only shows the current IP address. http://www.no-ip.com/

make two separate accounts, and try it out. It's odd that your work doesn't have a static IP, or VPN access.
 

1 more replies
Relevance 56.58%

I am sure I'm being very thick, but having read so many threads on this subject I still don't know Exactly what I should buy. Have a P11 266Mhz desktop (W98 - but can install SE)which connects via a USB cable to BT Highway. Have an upstairs P4 1.3Ghz PC (W98SE) plus my laptop (XP Pro - but this is configured to work on my office LAN).We cannot ever get Broadband 'cos we're too far away from exchange - so stuck with ISDN.Want to cable network, mainly for Internet, don't want downstairs PC to have to be on for upstairs/laptop to connect to internet.I know I need 2 x PC LAN card (built-into laptop)plus RJ45 cable. BUT - what Router/Switch/Hub do I buy. These different names confuse me and everything written seems to refer to ADSL/Broadband and doesn't mention ISDN.Sorry to be thick but please put me absolutely straight and out of my misery(and everyone else's!).

Answer:Network basics using ISDN connection

you will need an Isdn router, prices for which start very high and keep rising (128,210,320,430 to give you the first four prices at Dabs) so you might want to reconsider using the 'downstairs' pc as the gateway. in which case lok out for a NIC with 'Wake on LAN'(if the motherboard supports it) so the system can at least be hibernating

10 more replies
Relevance 56.58%

Just what the subject says. My area doesn't have broadband enabled so I'm considering 128k ISDN internet access.The problem is, from my research, the pricing structure is very confusing especially BT. All I know is one-off installation charge of 75 but BT website does not make any senses to me about monthly payment.Also I have visited Demon.net website and their is confusing too! It says that If I sign up for BT's Surftime Evening & Weekend, I can use demon's free access number to use 128k. So thats mean I will be paying monthly for BT's surftime and also for Demon's 128k connections. What about monthly payment for ISDN service or one off installation charge? Any informations will be much appreciated. Thanks

Answer:Good ISP for 128k ISDN connection?

is cable available in your area?ntl telewest blueyonder etc?ntl broadband is very good in my opinion.if not check out click here may give you some more info

3 more replies
Relevance 56.58%

My WiFi ISP has just changed the protocol on my laptop. One effect is it's now reporting 'dial up' connection as ISDN-Intel Pro/100 Network Connection. My LAN card is Intel Pro/100. I don't have an ISDN device on my laptop so this may be a virtual device. They seem to have used RASPPPoE 098B and left a folder on my laptop containing the files. I'd like to install the same connection on my other laptop. How do I do it?

Answer:ISDN Intel Pro/100 Network Connection

<<< My WiFi ISP has just changed the protocol on my laptop. >>>How did they change the protocol? Did they send you a file to install or send you to a website for a download?

3 more replies
Relevance 56.58%

Can someone advise please?I am attempting to allow 2 PCs to use one ISDN line - hopefully one line each. Here are what I believe are possible solutions and the problems I need to resolve:1. Enable ICS - can't do as I am using fixed TCPIP addressing on 10.x.x.x. Am I right? 2. Physically connect both PCs to the ISDN box. The box itself has one USB port (already connected to one PC) and 2 digital line connections. Its a BT device and they say you can connect all 3 if you want. My options are: a. Connect the other PC via a ISDN terminal adapter but this PC is some 20 feet from the BT connection point. Is there a restriction on the length of the ISDN line cable? b. Share the USB port of the BT point via a USB Autoshare 2.0 (via Lindy). Will this work on the BT point like all other USB devices? I already have USB extenders in operation for the 20 foot distance.Many thanks.Neil

Answer:Sharing an ISDN internet connection on XP

You could just connect the two PC's with a cross over cable, use the higher spec machine as the server so to speak. Set up your network using TCP/IP (firsts machines ip address: 192.168.x.1, second 192.168.x.2).Drop the firewall on the XP machines and set up sharing.click here for further information.

5 more replies
Relevance 55.76%

I've been using HH for about 3 months now and it's been working fine.For a number of weeks now, my internet connection appears to stop responding, the ISDN dial-up remains connected, however, access to the internet stops, i.e. browser reports page not found, or e-mail application returns unable to connect to server messages. This can happen at any time, either within a few minutes of connecting or after a long period of time connected. I've recently noticed that it can tend to be following a period of intensive data download, however this is not always the case. I've been using two different ISP's and the same problem happens with both of them.I'm running a 1.8GHz Celeron, 256Mb, XP Pro system. ICS is running with an ISDN 64Kbps connection using a 10/100 hub and 22Mbps Wireless Access Point. The loss can happen when any of the machines are using the internet connection.I've checks online and read about MTU's and different settings but I'm nervous of changing things that I don't understand!If anyone has any advice it would be greatly appreciated.

More replies
Relevance 55.76%

Has anyone any experience of using pcAnywhere to connect to a remote computer? The host is a stand alone dial up modem with its own phone number and the remote is connected to the internet via a BT ISDN line. No matter how carefully I follow the instructions, I cannot make a connection from remote to host. Anyone any ideas?

More replies
Relevance 55.76%

My neighbour has that BT Super Highway - ISDN Digital internet connection equipment (big white box and connects to pc from the box via a USB Cable)Problem/s: everytime going to connect is only will connect on the second attempt or other phones in the house won't work when he is online.Also other friend on street had BT Broadband via a USB modem and has the identical problem that when connecting to go online it will only connect on the second attempt and never the first.Is this a known common fault with BT internet/equipment or is it normal.I have seen these poblems somewhere else online but with no fix as they were new postings and about 8 months ago.just curoius if there is a fix and is it common for this to happen.

More replies
Relevance 55.76%

Hi. I removed an Epson printer from my system and now at bootup I always get the message that the ISDN connection wizard cannot locate any devices. ?? I don't have an ISDN connection on my system (never have). Is there anyway to delete that line from the registry? If so ... how? THANKS!!
 

Answer:ISDN connection wizard appears at bootup

10 more replies
Relevance 54.53%

Can someone please help me? I need to know exactly what equipment is needed to connect an ISDN to an 8 computer peer-to peer network. I was told I just needed an ISDN modem connected to a one of the computers with proxy software. Then just connect all the computers including the one with the proxy software to a hub, and that's it. Everyone else should have access to the Internet from the computer with the proxy software. Can someone please tell me if that's right?
Someone else told me I needed a ISDN router connect to a hub. Then all the computers should have ISDN modems connect to them.
Can someone tell me which one is the right one? I would really appreciate it. Thanks

{Message from Reuel: I had to get rid of the ALL CAPS, so I could read it}
[This message has been edited by Reuel Miller (edited 08-07-2000).]
 

Answer:{Advice Offered} - ISDN connection shared with small network

I would go with the first option. Just remember you have to configure all your client machines with the gateway of the machine that is hooked into the ISDN modem and you should be fine.
 

3 more replies
Relevance 47.56%

I know that generally i need a router and have to plug the TW modem into router/switch combo, setup MAC address cloning, then attach PC's to router/switch ports but was wondering if i can set it up without router..?Telewest BB connection just has the Motorola sb4200 surfboard cable modem plugged straight into PC 01 via installed NIC.Can i add an additional NIC into PC 01, connect it with RJ45 CAT 5 x-over cable to a PCMCIA NIC for the laptop (PC 02) to get an Internet connection using ICS in Windows XP that runs on PC 01, or do i have to go with the router option, any help, alternative solutions (bridging), suggestions, thanks in advance...

Answer:Telewest BB Connection Help (share connection)

Personal opinion would be to go down the router road. However:Why not consider wireless?It's relatively cheap these days.2 wireless pci adapters will allow you to connect both machines for file sharing and pc1 can be used as PC 2's web access. You can buy 2 wireless adapters (802.11b) from ebuyer for 40 delivered and no doubt cheaper from the local PC shop. The only downside to this method is pc1 has to be switched on if PC requires web access.If you go to the blueyonder networking section click here they'll quite happily supply you with netgear products to the tune of 111 for a router, wireless pcmcia card for laptop and usb wireless adapter for PC (802.11b).Definitely consider wireless, especially with the summer coming up and that nice Chardonnay you been saving can be sipped whilst you while away endless hours surfing on the lounger in the garden.Happy hunting

4 more replies
Relevance 46.33%

hi all, I'm a newbie, but have spent some time searching thru prievous posts and upon other forums without finding an answer, so I apologise in advance if this is simpleton stuff.

I've moved into a mates house, who has moved to australia but left me his PC.

His setup is as follows: a 1ghz athlon running winxp home edition and is connected via a vigor2200usb router to a usb external alcatel speedtouch 330 modem, housed in a separate room to his PC. He used to run his PC and multiple xbox's from the router with no problems via his ISP PIPEX adsl account which.. I'm supposed to take over.

I've brought into the mix my own PC : P4 1.5 ghz running WINME which used to connect fine and run smoothly via a dialup 56k modem and ISP freeserve. I notified them I was moving but upon getting here was unable to access the internet from that PC, even if I removed the broadband connections (microfilters) from the house. (v90 modem now removed along with dial up settings)

I began to get "poproxy.exe has caused an error in KERNEL32.DLL" messages on bootup which i've traced to my about to expire copy of Norton AV, which is now removed.

In addtition I started to get weird error messages on startup to do with "program X causing an error in KERNEL32.DLL" which I gather can be for "reason X". (I'm looking into one being a possible virus) I've elimnated those errors now,via msconfig running only a bare minimum of starting task... Read more

Answer:2 pc LAN but cant share net connection

16 more replies
Relevance 46.33%

i am wanting to share my wi fi connection with another device with an ethernet cable.can i or how?

Answer:share my connection

dont know how to edit my prev. post , but i read that i could change an option to allow others to use this connection on my laptop but cant find it because im new to vista.

1 more replies
Relevance 46.33%

Hello all,

I have one wireless connection on one pc at home and i am trying to share
it with another two pcs all connected via ethernet (hub) so what is the easiest way to
set this up and i wonder if my connection speed is 256 kb will it be enough for the 3 machines to open messengers and check mail all at the same time ?
I have win xp sp3

I appreciate any help

thank you
 

Answer:How to share one connection on 3 pcs ?

Well, as long as you're patient it'll probably do.

Is that wireless connection to a wireless router? If so, you simply bridge the wireless and wired connections in the one machine and connect the wired port to that switch. The other machines connected to the switch will have access to the router as long as that wireless machine is running.
 

1 more replies
Relevance 46.33%

is there any way to setup my imac running mac os 9 and windows xp computer into a network so that they can share the broadband connection? The router only has one slot so I will buy a hub but i just wanted to make sure so i don't waste money
 

Answer:mac and pc share connection?

11 more replies
Relevance 45.92%

When i had windows XP installed, i never had trouble tranfering from one network share to another... I would at least get roughtly 25MBs.. but with Vista (32 & 64) and Windows 7, transfering between network shares is super slow.. could takes days sometimes...

is this happening to other people??
 

Answer:vista: Network Share to Local = ~50MB/s | Share to Share = 1MB/s.. Huh?

I believe, this is also caused when I have to transfer files from my ipod. that it has to cache on my computer, and then transfer to the network share / computer, this is my theory, I never tested it ofc, maybe someone with more knowledge could help.

it's like unpacking a rar into a network share.
 

4 more replies
Relevance 45.92%

Hi there,
My LAN is using 192.168.xx.xx network. but I have a small office in Indonesia which all 4 users connects their notebook and retrieve email using SecurID(VPN). They are always connected and my VPN gives a 10.10.xx.xx IP address. my printer is network enabled and is plugged to the router(print server enabled). How do i share this printer with the users always connected to VPN. ?? pls help..
 

Answer:How to share printer over VPN connection?

well, if you have a print server on the network, and your outside users are VPN'd in, they should be able to ping to the address of that print server. If they can, you can direct them through the Add Printer Wizard, have them manually configure a new Standard TCP/IP port, and then add the print drivers. After that you should be good to go.
 

4 more replies
Relevance 45.92%

Hello everybody.I registered to forum to find a way to share my internet connection to my other computer with the xp installed.Should I open a new topic? Or can someone direct me if there is a open topic about this already.

note:English is not my native lanaguage so I apologise for any mistakes in writing or if something is unreadable

Answer:Way to share my internet connection?

Here's a checklist of things for ICS and file sharing for 2 croslinked computers (This is what works for Win 7 and XP):

- both computers set to the same workgroup
- restarts
- advanced sharing settings - all things turned on (network discovery etc.) except for password protected sharing
- bridged the connection with the internet
- turned on Internet Connection Sharing for the internet connection - this forced an ip to the other connection (192.168.137.1) and gave an option to select which connection should have access to the ICS (the second connection or the bridge - you choose the second / crosslinked cable connection)
- shared some folders on both computers
- worked instantly (the other pc aquired a correct ip and internet)

2 more replies
Relevance 45.92%

Hi guys!
I have a server with Windows server 2003.

I want to connect to internet with it without having Internet for itself.
I mean:
- It dials the internet connection
- By DHCP, it gives IP, Gateway and DNS addresses to clients machine
- Clients have Internet
- Server doesn't have internet

Is it possible?
 

Answer:Share internet connection

I think i may be getting the wrong end of the stick here. Is that not what a router is for?
 

1 more replies
Relevance 45.92%

I am using a dial up wireless internet modem on one computer and wish to share this connection across the entire home group.

Does anyone know how to do this?

Thanks for any help.

Answer:How do you share a dial up connection?

I would think you need to set one up in Network and Sharing Centre, then in Sharing tab in Properties, select the appropriate option. Give it a go.

9 more replies
Relevance 45.92%

My parents have a Dell desktop running windows XP and a new HP 64bit desktop running Windows 7 64bit. They have an actiontec wireless modem/router. I can connect the modem to the Dell computer and get an internet connection. I can move the modem to the other roon and connect it to the new computer and get an internet connection. I cannot get it to work on both.

I connected the modem to the HP computer using ethernet port 1 on the modem and the Dell on ethernet port 2 via a long ethernet cable. I cannot enable ICS on Win 7 because it doesn't see anything else connected. The Dell says nothing is connected to the LAN. Not sure what is going on unless the ethernet cable is bad or possibly too long. Any ideas?

Later this morning I am going to take a multimeter over and do a continuity check on the ethernet cable (I crimped the ends on) and make sure it is good. Am I correct is saying that it should be a "straight through" ethernet cable? Just wondering if there's any other setting I should check while I'm there.

Answer:Cannot share internet connection

Is it a router you've connected your computer to? If it is, make sure you've enabled NAT in the router...
Often you can access those settings by opening either:
http://192.168.2.1/, http://192.168.1.1/ or http://192.168.0.1/
username: admin
password: 1234 (or none)

9 more replies
Relevance 45.92%

Hello. 1st I'd like to excuse myself for possible grammatical fails in my problem, I'm not American nor Britainian so please accept my excuse.

Okay, here's the problem.

I'm connecting to internet via Wi-Fi USB adapter and my connection works great. But few days ago friend brought his PC to me so we could do some online gaming over night but there my problems started. We connected both PC's with ethernet cable in this scheme (My PC - ethernet cable - unset router - ethernet cable - his PC)

Okay the problem is that when I set up the LAN, I can't connect to the internet ( I noticed that I can surf the internet when I share my Wireless connection in advanced settings, so I use that trick to connect to the Internet when I need to ) but we can play in LAN.

So here's the real conflict. Why can't I share my internet connection to his PC. I allow my Wireless Network Connection sharing but he can't connect to the internet.

We're both using WinXP SP3 and we have almost same PC's. So can anyone help me?

I am even willing to use TeamViewer for easier help if someone can help me?
 

Answer:Can't share my internet connection

16 more replies
Relevance 45.92%

Hello. I got 2 computers at work and only one has internet connection.
So I have one with winxp sp1 installed and one with win98. Internet connection is on winxp on USB (PPP0E), and I cannot share (or I don't know what settings should make on win98). Can you help me?
 

Answer:how to share PPP0E connection ?

you would need to purchase a router to make the pppoe connection if you wish to share with both pcs at the same time. Or if your fine with only one having acces at anygiven time you would need to get a pppoe connection manager thats 98 compatible as win98 doesn't natively do pppoe like xp.
 

3 more replies
Relevance 45.92%

I have bought 2 Wireless Desktop Network Cards and installed them both (1 on each computer). They have picked up each other's signals and connected to each other perfectly fine.

My question is, how do I share my Internet connection with the computer that doesn't have Internet access? The guy at the shop told me it's possible to do this but there's no instructions or anything in the box to tell you how.




HK
 

Answer:How Do I Share My Internet Connection Between PC's?

Launch the Network Setup Wizard. Go to Control Panel -> Network and Internet Connections -. Network Setup Wizard.
 

1 more replies
Relevance 45.92%

Im planning to have a computer shop/internet cafe with 8 PCs. I have a Linksys Router w/ 4 Ethernet port and a DSL modem. I'm planning to use windows 2000/windows xp pro for the workstations and windows server 2003 for the server. How can I connect all my PC that it can share my DSL connection and they can share files and communicate with each other.
 

Answer:Im trying to network 8 PC and share my DSL connection.

11 more replies
Relevance 45.92%

I have recently had NTL broadband installed and connect through USP Port. Now I want to share connection with 2 other computers in the house.Can anyone advise the easiest way for me to do this would be much appreciated. Somebody recommended a belkin 4 port dsl router with cat 5 cable but this involves buying 3 network cards. Any help would be greatly appreciated

Answer:best way to share broadband connection

Do you mean USB?Otherwise thats the only way u can share...all the pc's are going to need networks cards. The one with the connection needs a network card too...

5 more replies
Relevance 45.92%

I want my wii to connect to the internet, but I need to share the internet and I have a dongle (mobile broadband) is there any way to connect it? If so please share!

Answer:How to share network connection with wii?

You'll be plugging your wii into the computer for this.

1. Plug in your console (WII, Xbox 360, PS3) and allow it to acquiring ip address.
2. click on the Windows button and type "network and sharing center" and enter
3. on the left right under manage wireless networks, should say change adapter settings click that
4. right click local area connection and disable it.
5. right click local area connection and click properties.
6. there should be a tab that says sharing go to that tab.
7. there is a box that says allow other network users to connect through this computers internet connection. uncheck it if it is checked.
8.hit ok then right click local area connection and enable it.
9 now select both your wireless network connection and the local area connection and right click and it should have the option to bridge connections. when you click bridge it will do its thing and should work when its done.

5 more replies
Relevance 45.92%

Well i finally got rid of my ntl 600k service because of inumerable problems and im waiting for my new "pipex" adsl BB service to be switched on,thing is my daughter who lives next door has been at me to connect our pc's together to share the connection.she has been advised that a simple network cable will suffice as long as my pc is switched on but as she would be a bit on the nocturnal side a separate cable would be required to enable her to use it while my pc is off.The distance involved woud be approx 15 mts and i would run any cables on the external wall.I run windows xp and the other pc runs windows me.If someone could advise on the simplest way i could achieve this i'd be eternally grateful.Many TIA.

Answer:share my adsl connection ...how ???

If you use a router to connect the two computers then your computer will not need to be on, you connect your computer to one of the router ports and then connect the modem to the router and lastly connect your daughters PC to the router and she will be able to share without your PC being on.

10 more replies
Relevance 45.92%

Hi all,I have recently moved to Pipex BB, and thoroughly love it. I am considering utilising two spare machines I have to go online too, I dont want to mess around with hard wiring CAT 5 cables etc...so I was thinking of a wireless netwaork/router. Can an y point me in the right directions for tips and a good guide? Including the best way to setup and what hardware I require. Thanks peeps.

Answer:Broadband...best way to share connection?

You will need a Access Gateway plus a PCI wireless card for each PC. Then just follow the wizard to set up. Its very easy, but expensive in comparison to using a hub and patch cables..

7 more replies
Relevance 45.92%

Hi there,

I am currently trying to set up some internet sharing action, and am having a bit of difficulty. Ok, so there is a wireless network in the house I am in, my laptop has wireless in built, but my desktop has no wireless card so as I am in the attic of the house, I am unable to just use an ethernet cable to connect it to the internet. I DO, however, have a cat 5 crossover cable, and was just wondering if it is possible to go from wireless router to wireless laptop, then through a WIRED connection to the desktop?

I've been trying for about half an hour now, but no joy. Am I just being stupid, or do I just create a connection between the desktop and the laptop and then bridge it with the wireless connection? is there something that I need to activate that I've missed?

I have just bought a wireless card, and it should be arriving next week, but I just thought it might be interesting to someone to solve this question.

thanks guys
 

Answer:Trying to share an internet connection

6 more replies
Relevance 45.92%

I have my main computer connected to sbc dsl running windows XP. I have two other computers.....1 with windows 98 and the other with windows 98se. I want to be able to share the dsl connection with these other computers.....what do I need to make this happen? By the way my dsl modem is an old speedstream external usb. Any help would be greatly appreciated
 

Answer:want to share dsl connection with 3 computers

10 more replies
Relevance 45.92%

Hey,

I'm having a bit of trouble.. I'm trying to get the two ethernet ports on my mobo to share a internet connection, but when i chose advanced under the port connected to router, i dont get a "Share this connection" button, nor do i get it on the other port.

If i try to run the "Setup Home Network Wizard", it doesnt open.. i get nothing. I had this working fine until i reformatted and reinstalled... Mobo is Asus A7N8X Deluxe... Can anyone help me out?

Thanks
-Limb
 

Answer:Can't share interent connection

8 more replies
Relevance 45.92%

Hi, i have an alpha usb device which catches wireless signals at my home and that device is connected to my laptop. my laptop wifi is not working so i purchased this device in my laptop so i have an easy access to internet through that device. i want to share that internet connection with my desktop. i dont want to purchase another device for my desktop. so i tried this:

i connect my desktop pc to my laptop through crossover cable. then i select my desktop pc tcp/ip properties and clicked on obtain and ip address automatically. then clicked ok.

then i went to wireless network connection of my laptop. then properties -->advanced then enable sharing. beneath that check box there is a scroll down list. 2 options in this list. through LOCAL AREA NETWORK / BLUETOOTH. I select local area network. then i click ok but it is showing an error. what is happening?

Answer:share internet connection

Where are you catching the wifi signal from

4 more replies
Relevance 45.92%

Is it possible to share a dial-up connection through network cards in two different computers as long as they are connected together? If so, how do I do it?
 

Answer:Possible to share dial-up connection?

clancaster23 said:



Is it possible to share a dial-up connection through network cards in two different computers as long as they are connected together? If so, how do I do it?Click to expand...

Just remember that you're bandwidth is going to be way dogged down trying to do this. We're talking zipolay bandwidth (OK, you'll have some, but probably just enough to frustrate you!)

Second, your Internet provider will definitely frown on this unless you use something (like a router) to mask the fact that you're using two systems at one time to access the Net. (Can't remember if Win9x or XP's Internet Connection Sharing does this masking automatically, but it seems to me that Win9x doesn't. I could be wrong).)

If you're using Win9x, you have to enable Internet Connection Sharing, I believe it is, in the Control Panel's Add/Remove Software: Click on the Windows tab and go to ... (have to look real quick ...) Internet Tools and enable Internet Connection Sharing. Too, firewalls may not work in this configuration either, so keep that in mind.

Hope this helps,
 

3 more replies
Relevance 45.92%

I already know the answer to this but I'm hoping there's something out there. Is there ANYWAY POSSIBLE to share a dial up connection through a windows 2000 domain?

Analog router is too much.
 

Answer:dial up share connection??!!

Well, I suppose you could. But why?

If you just made the connection on the main computer, you could then share it like you could a broadband connection. It would be no diffrent to setup.

Of course, it's going to be really slow if you share it. Any dialup connections have a tendency of cutting out a lot,so odds are pretty good it will keep going down.
 

1 more replies
Relevance 45.92%

My ISP disbled my router to only allow 2 devices to connect through router (PC and Laptop). I want to connect Iphone too but since Iphone doesn't support PPPoE I cannot log in to internet. I tried to share pppoe connection in my laptop but it doesn't work....Is there any other way (besides buying other router) to let iphone connect to internet. I am using Windows 7 Home Premium 64 bit.

Answer:Share PPPoE connection?

  
Quote: Originally Posted by liks


My ISP disbled my router to only allow 2 devices to connect through router (PC and Laptop). I want to connect Iphone too but since Iphone doesn't support PPPoE I cannot log in to internet. I tried to share pppoe connection in my laptop but it doesn't work....Is there any other way (besides buying other router) to let iphone connect to internet. I am using Windows 7 Home Premium 64 bit.


As long as one of your PCs has a WiFi card it can create its own wireless hot spot using Connectify.

I use it to connect my own iPhone to the internet when I'm too far from my router and it works a treat.

It allows you to be both connected to a router wirelessly and to be acting as a WiFi access point at the same time.

It is one of the most versatile networking apps out there.

Oli

7 more replies
Relevance 45.92%

I am trying to set up an internet connection share. I cant share files because the host pc is XP Pro with NTFS and the network pc is Windows 98 Fat32. When I did the setup the Wizard said I could use the XP disk in the 98 system to complete the task. I also followed the directions from this note,

From: Daniel <[email protected]>
Subject:
Date: Sunday, March 07, 2004 3:05 PM

Try this:
"Just plug the Crossover cable into the two computers. To set it up go to Control Panel/Network.

If there is and entry there for TCP/IP fine. If not you need to add it. Click Add the Protocal/Add. Select Microsoft and select TCP/IP and OK.

Once you have TCP/IP install highlight it and click properties. Click specifiy IP address and insert 192.168.000.001. Enter sub net mask of 255.255.255.000.

You may get asked if you want to re-boot at this stage. Decline as there is more to do.

Click File and Printer sharing and tick both boxes. Now you can re-boot.

Do the same on the other computer but this time enter an IP address if 192.168.000.002 with the same mask. Install file and printer sharing as well and reboot.

Once the computers have re-booted you need to set up sharing. Right click on any drive or folder in Windows Explorer and clcik Sharing. Click shared as: Either axcept the name offered or enter one of your own. In access type I would suggest Full if you are the only one to be using these computers, otherwise enter passwords if required.

Do this for every Dri... Read more

More replies
Relevance 45.92%

In the room where my PC is, I also have my xbox. I do not have a wireless adaptor (yet) for my 360 and the cat cable coming into the room is just long enough to reach the pc. So if I want to go on live, I have to move the xbox near the cable and pull the cable from the back of the pc (which sucks if I need it while on live).

The motherboard that I have has 2 onboard NICs, is it possible to use one for an incoming network connection/to the router and use the other to connect my xbox to provide Internet access to it? How would one go about dong this? Thanks
 

Answer:Is it possible to share my pc's network connection w/ my 360?

Might be better to just pickup a cheap switch, and hook the PC and xbox up to it?
 

9 more replies
Relevance 45.92%

I have access to an internet connection that uses mac address filtering and timed sessions. i.e., from 30mins to 366days. I want to use my connection (I have a 366day account) to the network as a hotspot for my iPhone without having to go through the hassle of either getting another 366day pass or the grief associated with spoofing the mac address in order to get online with my phone. I also don't want to use iTunes because it will mess up my iPod's stuff too. And adding a new device has already cost me a library of stuff and due to "we can't confirm xyz, have a great day" after it was all deleted. (I changed those settings now though from the default burn all not the same" even if a few are just renamed to save scrolling. Anyway going off tangent their.

How can I use my laptop as a pseudo router so that the mac filter doesn't interfere with my phone? ICS through the windows networking doesn't show my laptop as a separate WiFi connection, ie transmit as a router would. (the phone will though but also rack up a fortune in data charges though.)

Please can someone help me with this. I have tried more than one so called how to that has not done what it said it would, which is turn my laptop into a pseudo-wireless router and at the same time maintain my connection to my internet connection.

And thanks to MSN giving me grief with the new format, basically because I am not using the same computer/apartment/ISP etc... that I used when I sig... Read more

Answer:how 2 share internet connection?

You apparently are trying to abuse your internet access, and we do not help with such activities. Please review the rules.

Closing.
 

1 more replies
Relevance 45.92%

I was going to reformat my sister computer so she wanted me to transfer some files on my computer so she can keep those file after reformatting and move it back to her computer, but for some reason my LAN connection is not sharing any files with all of my computer (4 computers) but I can still get internet connections... can anyone help me out ASAP please!!!
 

Answer:unable to share my lan connection

7 more replies
Relevance 45.92%

Can I share my internet connection by using a hub? I have a 5-port hub but no instructions on how to use it??? I want to be able to get online with both computers at the same time.
Can someone advise me if the hub will work or do I need something else? I have intermediate computer knowledge but know nothing about networking.
Katy
 

Answer:Share Internet Connection?

You need a broadband router for most broadband accounts.
 

1 more replies
Relevance 45.92%

I have one PC that is connecting wirelessly to a network

I have a laptop that I can't get the wireless to work on (this is due to a physical fault)
I've tried using an external wireless USB stick - but no joy
Basically it's an old and battered laptop

How can I share the internet connection from the PC (that's getting the connection wirelessly)?
Can I join the PC and the laptop with an ethernet cable and share the connection??
If so, how?

Thanks
OM
 

Answer:How can I share an internet connection from one PC?

16 more replies
Relevance 45.92%

Hi Folks

I have BT broadband to my house.

I have two PC's a work laptop and a desktop. I currently have both setup up to use the broadband access but only one at a time.

What I am wondering is if there is any way to share the connection between the two PC's so that both can be connected to the web at the same time?

If this is possible what hardware would I need?

Thanks
 

Answer:Can I share my broadband connection?

You would need to install a router, probably a 4 port as I have not seen a 2 port router. The router would be installed after the modem. The cable from the modem (that connects to the computer now) gets plugged into the WAN port on the router and the two computers woul be connected through the LAN ports on the router. You will probably have to purchase those cables seperately. Radio Shack is one source for all those components. Or you could go wireless. It depends on what fits your budget.
 

2 more replies
Relevance 45.92%

Recently i bought an xbox 360, and i am trying to connect it to the internet by using my Vista PC.

my PC is wirelessly connected to the internet, and i am trying to connect the xbox to the internet through an ethenet cable.

When trying to share my internet connection, i get the error message that is in the attachment
Any help is much appriciated, and thank you in advance
 

Answer:Cannot allow my Vista PC to share connection

9 more replies
Relevance 45.92%

If I linked two PC's together with a basic ethernet connection, would both be able to access the net (cable bb) or just the PC with the cable connection?

Answer:2 PC's - 1 Internet connection - Will it share?

click here - there is a guide here which may help. Posted in this thread: click here

4 more replies
Relevance 45.92%

Hello There,

I have been using windows since forever on my Computers.
For years I have been using Windows 7 Ultimate 64bit on My Main PC and Secondary PC.

Normally I would create a Homegroup on the Main, And get the Secondary to join.
I'd then Share my Dialup Connection, And the Secondary PC has internet too, To play MMOs, Download, and anything else.
All by just using my LAN Cable to connect the two.

But this doesn't work on Windows 8.1 Pro

I have seen LOTS and LOTS of step by step "Solutions" Which I have followed to the letter but couldn't achieve anything at all.

Can anybody please help me solve this problem so I can have internet on both of my PCs again?
And can Windows 7 Ultimate share Internet to Win 8.1 Pro still? Or is it Win 8.1 Pro too broken to even be shared to?

Please help me it is urgent and I've wasted 2 days trying to solve this, I have a killer flu and I need to fix this before Monday

Kind Regards

More replies
Relevance 45.92%

i have Shared my USB wingle device b/w two PC's .. just by simply allowing my wingle adapter to allow other Users to use internet.. no advance options Use nor any software..
resulting my client PC has slow connection and also PC became slow..
i want to improve the connection speed and also my Client PC speed..
Help required..
 

More replies
Relevance 45.92%

Hi. I'm having this problem in Windows 8 where I can't share the Internet with another PC, which runs Windows XP. My Internet connection name displays as "Unidentified network" which I think disables ICS and sharing altogether. I've also tried changing configurations in the HomeGroup and, although a second connection called "Network 2" set as "Private network" appears, it disappears after I reboot the PC. Any help please?

Answer:Can't share Internet connection

Maybe this tutorial will help. It helps to use a crossover cable for this connection but I believe there are ways around that. The second link shows settings more specific to setting up connection sharing with XP machines.
Internet Connection Sharing - Enable - Windows 7 Forums
Internet Sharing using Cross-Over cable - Windows 7 Forums

You will also want to leave the Home group if you set one up. Home groups are made for Windows 7 machines only.

If you need to share files between those machines you should set up a Workgroup using the same workgroup name for all machines in the workgroup.
Workgroup Name - View and Change - Windows 7 Forums

12 more replies
Relevance 45.92%

win 2000 on seven machines one upgrade 98 to 2000 is isdn connected server.
How do I connect the lan is set to use dns.
regards Alan
 

Answer:how do I share dialup connection

You'll hate me before this is all over!

Please don't post your questions twice, it's against TSG policy.

Here's the original question: http://forums.techguy.org/showthread.php?threadid=40059

I'm closing this one.
 

1 more replies
Relevance 45.92%

Hello!
I need some help in establishing Internet connection sharing. I've got 2 laptops. Both are WiFi and Ethernet enabled. The 3rd piece of hardware is a WiFi router (I call it a "modem"), which acts as a bridge basically at this point. It's this one here:
HUAWEI wireless home gateway HG 530 (its official title)
The Internet connection to the ISP is a wired PPPoE one. There's RJ-45 cable that enters our apartment from the outside (I assume that there's a major router that serves the whole building with Fiber Optic all the way down to ISP itself, but I'm not sure and it's irrelevant to my issue here). I used to connect that RJ-45 cable into an appropriate jack on one of the laptops and I have a PPPoE W7 connection (called a High Speed Connection in Windows environment). So I just "dial" that Internet connection with username and password provided to me by my ISP. It's a regular Ethernet connection as far as HG530 is concerned. Then I started using laptop's WiFi to reach the HG530. I still use the same Windows PPPoE connection for dialing. It saves me having a cable on the floor which (the cable) was reachable by my cat who likes to chew stuff. So that's what I have right now.
I want to make it clear that it's NOT a WiFi Internet connection (there're zillions of threads all over the Net how to share it -- I wouldn't be asking it AGAIN here!). Internet connection is still a wired one. It's the... Read more

Answer:Need help to share Internet connection

7 more replies
Relevance 45.92%

Dear all
i know there is atopic with the same name but it doesn't solve my problem
any how i want to do the same work by sharing a printer with a vpn in connection but
when i ping it its giving me a message
requested time out
if i disable the VPN it connects normally
i don't know what to do really
 

Answer:Share printer over VPN connection?

Where is the printer located? On a Domain or Workgroup?
Is the Printer Shared already? If not that needs to be done at the location.
Do you have permission to use such shared printer?
Are you at work or at home?
Are you trying to use a printer on your Workgroup at the same time you connect to your company domain via VPN?
Are you on your company laptop?
Do you have permission granting you access to change administration functions on your company laptop.

The last one is very important because it would allow you to add your home printer to your laptop and you could use this printer any time you're connected over the VPN tunnel. If you can't get admin rights, then you need to bring the printer CD/DVD or have a support tech add your printer to your laptop. Ticket would need to be generated though? If required by your companies policies?
 

11 more replies
Relevance 45.92%

oh wise people, I have aol broadband connected fine to pc, and a laptop wirelessl;y networked to pc. the two computers see each other fine, i can swap files from each other ok. But i cant get the internet on the laptop through the network.I have loaded AOL on the laptop and set it to connect through tcp/lan but it cant find it.any ideas please.

Answer:how do i share ny broadband connection

What OS are you using on each machine

10 more replies
Relevance 45.92%

My sister has a desktop and a laptop. she has a standard 512kb aol internet connection and two modems. what is the best (cheapest and easiest) way to enable her to share the internet connection with both machines and will it enable her to use both computers to brouse the interweb at the same time? Is a network required or is there some way opf utilising both modems to save doing that?Thanks in advance!

Answer:How do I share an internet connection between 2 pc

is to use 1 modem and link the two computers with a crossover network cable

4 more replies
Relevance 45.92%

 I connect to the internet on my computer but can't seem to share it so another computer connect to mine on like a small home network can use it. Please help. I would like ot know how to do this with dial up and broadband please

Answer:I can't seem to share my internet connection?

Insufficient information. At what part of creating a LAN are you?

4 more replies
Relevance 45.92%

I have two small offices in different location the far between each other around 5Km each office. What the diagram will be look like of the hardware and layout that you suggest for each location and if there is any choices could you explain why especially for the devices we will use and what brands and do i need a server or network printer if i need where it shuold be. thank you
 

Answer:How Do I Share An Internet Connection?

You want to share an internet connection between two small offices 5Km apart? 5Km as in 3+ miles? Contact your local telecommunication companies and see what they can offer.

I hope you have other reasons for wanting your own private network between these offices as any solution is going to be far more expensive than two internet connections.
 

1 more replies
Relevance 45.92%

to start off i am using one of thoes modems called the UM150 provided by verizon wireless, its a modem that connects to your computer through USB. it uses a software that you install on your computer to manage the internet connection.

what i am trying to do is "share" that connection with my xbox 360. but the only way my xbox accepts internet connection is through a ethernet cable, so my current setup is the UM150 to the USB port on my laptop, an ethernet cable from my laptop to a router, and my xbox is connected through the router also.

is there any way i can connect my xbox to the internet through my computer?

my xbox360 has a text connection program, it cannot discover a DNS
 

Answer:Share internet connection

12 more replies
Relevance 45.92%

We will shortly be getting Broadband from Wanadoo. We have a laptop in the house and a desktop in the office (50 metres away). Wireless connections would not be suitable because of thick stone walls. We need to access Broadband from either PC even if the other is switched off. We understand we will need a Router and Ethernet card for the desktop. Can anyone tell us how to connect all this kit together please and has anyone got a reccommendation for type of Router.

More replies
Relevance 45.92%

i have just installed a speedtouch pc modem in my computer instead of usb and it is much more stable.however i have internet connection sharing and it no longer works.when i switch the second pc on it disconnects the modem and when i turn it off it reconnects.the second pc sees the first and vice versa but modem goes offline.any ideas.darren

Answer:cant share internet connection please help

When replacing the USB modem, did you disable "Internet Connection Sharing" on the old connection and then enable it on the new connection in the Network Connections Folder?

3 more replies
Relevance 45.92%

I am running xp pro on a host and client computer using a Pantech UM175 to connect with my wireless broadband. I am running a CAT5 cable from host to client and using a standard ethernet switch. I know my LAN is connected because I can see the files on the host computer from the client (but not the other way around - weird and it pings o.k. The "Local Area Connection" shows little or no connectivity and I cannot connect to the internet on my client computer. I have run the network setup wizard and repair but not success. Any ideas out there? Thank you for any help on this...:confused
 

Answer:cannot share internet connection

how do you connect to the internet? do you have a cable modem or dsl or something? also, are you using a home router at all?
 

9 more replies
Relevance 45.92%

hi!

im using an old pc directly connected to the internet, and other pcs are using the internet connection share to get online (all with xp pro)

now for a while, i have the problem, that i cant connect to some pages from the clients, but from the server (like ebay, amazon ...)
no error msgs, the browser just loading nothing!

EDIT: no router, firewall or virus scanner resulting the problem
 

More replies
Relevance 45.92%

Hi, I have a new computer the wife wants to use my old pc and use my broadband connection I have a modem for my broadband connection how can we use the same modem to connect to the internet the modem only has one usb connection to my pc

Answer:share broadband connection

You need to network the two, either with a cable between the two or with a wireless router.

6 more replies
Relevance 45.92%

I have 3 computers in 3 separate rooms. When my daughter comes home from college she will have a notebook computer. Without having to disconnect the ethernet cable from the back of her Desktop PC is there a way to split the male end to 2 female ends. This would allow me to connect 2 short male to male ends. One to the PC and one to the notebook. Does such an inexpensive splitter exist. I was able to split my phone lines like this and that splitter was about 2 bucks. Do they make them for RJ45 ends?
 

Answer:how to share one ethernet connection

What you need is a router, and I'd recommend a wireless one so anyone with a laptop can connect without cabling.

Here's an Open Box router and wireless adapter for $23: http://www.newegg.com/Product/Product.aspx?Item=N82E16833127175R
The modem connects to the router, and the router shares the connection with any and all computers connecting to it. So you can all be on the internet at the same, and even sahre files amongst yourselves.

A simple splitter won't work.
 

1 more replies
Relevance 45.92%

Hello! i have 2 pc both running windows xp sp2... and a modem...
and i use asus rx 3041.. i can share files but i can't share internet connection...

can anyone help me? thanks!
 

Answer:Can't share internet connection in 2 pc

16 more replies
Relevance 45.92%

I've recently networked two computers, a newer HP Pavilion (XP-h) and an older Compaq Presario (ME) using a d-link router. Both computers have a dial-up connection when needed (which is rare) but on occasions it would be nice to have both computers online at the same time.

Is there a way to do this? I know I could do it easily with a broadband connection, especially because I'm using a router anyway, but that's just not needed here.

thanks,
JTN
 

Answer:share a dial-up connection

you can do Internet Connection Sharing. You will have to choose which one will be the 'gateway', but I wouldn't recommend it on a dial-up service.

Actually I wouldn't recommend it period. It's a pain in the rear when something goes wrong.
 

2 more replies
Relevance 45.92%

can I share an internet connetion betwenn a mac and pcMac is OS X and PC is win 98 SEthey are connected via a crossover cable and already share filesISP is bt broadband through an ADSL modem

Answer:share an internet connection

Look at this :click here

1 more replies
Relevance 45.92%

Hello all,

Okay hear is the problem that I am faced with... I have a Virgin Mobile MC760 3G broadband device, I want to share that 3G internet connection with my D-Link DIR-615 router so that I can connect to the 3G over WiFi on my other devices.

The host computer that the 3G device would be plugged into is running Windows XP version 2002 Service Pack 2.

I realize that they do sell 3G routers but I would like to use the D-Link DIR-615 that I already have to avoid buying another router. I also realize that it may be easier to share the connection by creating a wireless network on the host computer and then enable internet sharing, I don't want to do this I need to share the connection through the router.

I don't know if it is possible to do this but any help would be greatly appreciated.
 

Answer:Is it possible to share a 3G connection through a router?

You will need a second network card on the PC so that you can connect it to the router and use Internet Connection Sharing.
 

1 more replies
Relevance 45.1%

Hey Guys
I just wanted to know if anybody have ever setup and sent files between two computers with out a internet connection. Because I have a business client is looking for a solution that can do this between 2 computers in different offices at his shop.

Only solution I gave to the customer was use a flash drive and save the files onto the flash drive and transfer files that way.
 

Answer:How to share files without a internet connection

Just run an ethernet cable between them?
 

24 more replies
Relevance 45.1%

i have a cable modem with broadband connection. all is fine, my daughter are now running a rota as to who can use the internet. i want to be able to connect our laptop,( which is set up for the broadband connection if we unplug , from the main computor)and the main pc at the same time for independant internet access using just the one cable modem is the possible and what do i need to buy to do it.

Answer:share broadband connection - with laptop

click here for options have not got broadband yet, but when I do I am going to network our 2 pc's using a router and connect this to the cable modem - hardware firewall in router good for security

3 more replies
Relevance 45.1%

Hello to all !
This is more of a request for guidance than for stating a specific problem so here goes..........
I am planning on purchasing a new computer for my 12 year-old son. I would simply like to share my existing ( cable-connected ) ISP with that new machine when I purchase it. I would also like us to be independent in terms of NOT sharing files or printers. etc. As far as location specifics are concerned, his new computer would be located in the next room over from mine, just on the other side of the wall, if you will. I have been thinking about a wireless configuration, if for nothing else than ease of installation and set-up, etc. I understand from some reading and general research that a router is key in this, of course. My WindowsXP SP2 Control Panel has icons for Wireless Network set-up and the general Network Setup Wizard.
I am attaching a detailed list of my own computer specifics as follows:
Virus Protection
Up-to-date


Microsoft Security Updates
Up-to-date


--------------------------------------------------------------------------------

Computer Profile Summary
Computer Name: Gateway-lafcy9p (in MSHOME)
Profile Date: Saturday, October 22, 2005 11:10:35 PM
Advisor Version: 7.0t
Windows Logon: Owner

Operating System System Model
Windows XP Home Edition Service Pack 2 (build 2600) Gateway ESSEX2 4000811
System Serial Number: 0029911848
Chassis Serial Number: 0029911848
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.40 gigaher... Read more

Answer:Planning to share an Internet connection

You're right, the router is the key component. If you can run a wire, I strongly suggest you do so. A wired network will be more trouble-free than a wireless in almost all situations. It's obviously also much more secure.

If you really want to go wireless, you can still connect your computer wired to the router, since you're right there with it. Also, you want at least one wired connection to the router for configuration anyway. What you'd really need is a wireless adapter for the son's computer and a wireless router in that case.
 

3 more replies
Relevance 45.1%

OK, here is the problem. My wife and I both have laptops and often want to get online at the same time. I can't get cable or DSL and sattelite Internet is $$ not feasible. Can I set up to share one a connection either wired or wireless?? I do not want to add another line right now, I am looking at my options. Would a wired router get me anywhere? I am looking at the Wiflyer from cyberguys.com and it looks to be my best bet right now, any suggestions??
 

Answer:Possible for two laptops to share one dial-up connection??

you will need to setup a rudimentary network

get yourself a small router, plug both the systems in to the router, enable internet connection sharing on the system that is plugged into the socket and then have your other laptop use the connected laptop as its default gateway etc.

this should work I think.
 

8 more replies
Relevance 45.1%

I've never had this kind of problem before so I don't know wtf is going on.

I've got my wireless connection that connects to my router and i got my LAN connection that goes from my computer to the X360.

When I try to share the connection, I get some weird Ip conflict or something.

On this same computer, I've made that Xbox-computer connection sharing twice and never had a problem.

Btw, I just changed my router cause my other one stoped working (at least the wireless part). I reseted it but that didn't fix the problem.




 

More replies
Relevance 45.1%

Hi, i have 2 routers, one is a belkin 54g wireless router and the other is a belkin n1 mimo wireless router.

I have one desktop wired into the n1 and a laptop which connects to this wirelessly however there is another desktop upstairs and i have no wire long enough to reach it and no wireless usb dongle thing.

My question is, is there any way to plug the second desktop into the belkin 54g and connect to the downstairs network wirelessly, thus giving the 2nd desktop internet?

thanks, hope you understand my problem!
 

Answer:2 routers share one internet connection?

16 more replies
Relevance 45.1%

Hi all,
this is my first post in this lovely forum,

well i do have a problem,

i have an internet connectionon my desktop with Xp on it, and i have a got a new laptop couple days ago with Vista and im unable to share the connection between them , i tried almost all ways and nothing worked,
so plz if u have any clue for the solution ill be thankfull

More replies
Relevance 45.1%

Here's a lame diagram

(cable modem btw)

I've tried setting up internet connection sharing (ICS) with windows but it doesn't seem to be working. Would I need to make that computer a DHCP server some how? (because I'm assuming the switch isn't assigning IPs)
 

Answer:Share internet connection with a switch?

Instead of ICS, bridge the wireless adapter and the LAN adapter on the WiFi connected computer.
 

9 more replies
Relevance 45.1%

My computer in my room is connected to the internet via Ethernet cable which leads all the way down to the lounge where our router is. I would like to connect my Xbox 360 in my room to the internet and still be able to use my computer as internet as well without having to unplug from one to the other. I would prefer a wired connection, however wouldnt really like to buy another 30ft long ethernet cable just to connect my xbox all the way downstairs to my router.
How can I share the internet?
 

Answer:How can I share my PC Internet connection with my Xbox 360?

Go wireless... Spend a little on a wireless router and a wireless NIC for your computer. The XBOX should have wireless capability already. Or, you could buy another wired router and set it up in your room. Attach it to the existing internet wire from the lounge and connect the XBOX and your computer to the new router
 

8 more replies
Relevance 45.1%

Here is my issue: I have my laptop hooked up to my non wireless router, and I dont want to run a cable to my XBox 360. Is there a way to set up an Ad-Hoc wireless connection between the laptop and the XBox 360 so that I can share the internet connection? I can work in either WinXP or SuSE 10, although I would prefer windows.

Thanks,
 

Answer:Ad-Hoc Wirless/Share internet connection

Does the 360 have a wireless interface? If so can you get to some kind of admin console?
 

1 more replies
Relevance 45.1%

First of all, hello to all and thanks for having this site to help people.

I have glanced around trying to see if my Q has already been answered but am finding myself so technologically challenged (dumb maybe! ) that I don't even understand a lot of the terms being used. So here is my question if anyone can help.

I have Cricket Internet. With this company you buy the little plug-in broadband modem. They want $120+ per modem (although some of their advertisement deceitfully implies you can get a new modem for $34- when I went to buy another one for the second computer we've gotten the guy said "Oh no, it's $120+ for the modem and thirty-four dollars per month to use it." )
So anyway, I was wondering if anyone can tell me how I can have both my computers sharing the Cricket connection while only having one plug-in modem? Somebody said something about a router . . . . .and then it was all Greek to me. We actually have 2 desktops and one old laptop, (almost forgot about it), and ideally I would like to have them all on the Cricket Internet without the expense of buying 2 more modems and having the additional $34 x 2 added to my monthly bill.

Thanks in advance for any help.
 

Answer:Can both computers share Cricket connection?

16 more replies
Relevance 45.1%

Hello

Can I share internet connection through ADSL router without sharing the file and folders on the LAN.

Friend of mine got shop and he would like to give internet connection to the neighbor shop , but he would not like to share his files and folders with neighbor.

Can we achieve that with Siemens SpeedStream 6520 or any other router ?
 

Answer:share internet connection but not LAN files

9 more replies
Relevance 45.1%

I have recently installed Virtual PC on my machine as I want to have multiple versions of MS Office running.

There are three virtual machines, all running WinXP Pro (as is the main machine).

That main machine has a wireless Internet connection via a Linksys WUSB54G network adapter, which is connecting to a WRT54G router.

What I want to do is make the Internet connection available to the virtual PCs.

I've been looking into this and got as far as installing the Microsoft Loopback adapter on the VPCs, but I'm not really sure what I'm doing with this and so it's not working.

I've tried to install the Linksys WLAN monitor software on the VPCs, but the installation automatically closes before it can run (some setting somewhere??)

Can anyone help out with this? I know I've probably not explained it great as I'm pretty confused with it all!

Cheers.

BTW - I'm runing Virtual PC 2004 (free version)
 

Answer:How to share a wireless connection with Virtual PC?

9 more replies
Relevance 45.1%

Hello,

I am in a bit of a dilemma. We just built a new shop and are trying to get wireless throughout the whole thing. However the situation is unique and I need some help.

The internet connection is actually a large area wireless connection. It is provided by DTN. Basically we have a dish type of thing on top the shop that picks up internet from a transmitter about 3 miles away. There is a large cable that goes from the dish into a Cisco 350 Wireless card in the computer.

ISP: http://www.speednet.com/residential.html

Wireless Card:
http://www.cisco.com/en/US/products/hw/wireless/ps4555/ps448/index.html

We are given a static IP address from the company which is in the 10.1.x.x range. What my original plan was to use ICS to share the DTN connection to a wireless router that is connected to the LAN port of the host computer. However ICS only works for the 192.168.0.1 ip address. We have to use the 10.1.x.x IP that we were given, that cannot be change. So because of this ICS does not seem like it will not work, unless there is a 3rd party tool that can used.

Also anytime that I enable the LAN port on the computer now that the router is plugged in, the internet drops off. it looks like the computer is defaulting to the LAN connection instead of teh DTN connection (which shows up as a wireless connection to XP). Is there anyway to stop this from happening?

Other notes:

Computer: It is a Core2Duo running windows XP Pro.

Does anyone ... Read more

Answer:Share a Wireless Internet Connection?

Your ISP is giving you a private IP address as your "static" IP? Is your ISP run by a 17 year old out of his mom's house? That is the same as if they gave you 192.168.1.7 or similar as your static IP. That is also probably the reason ICS isn't working.

I have a few suggestions but none are perfect:

1. Call your ISP and bitch at them for being pathetic and get a real IP address from them.

2. Attempt to bridge your Wireless and LAN connections. You should then be able to plug the LAN port of your computer into the WAN port of the router, and use your 10.1 "static" IP as the WAN IP address on the router.

You'll still need an IP for the bridge interface on your computer though, but if you've only been assigned one "static" IP then you'll have to use that on the router WAN port instead. It should still bridge traffic even without an IP on the bridge interface but you won't have internet access on that computer unless you installed a 2nd LAN port and connected that 2nd LAN port to one of the LAN ports on the router.

3. Leave your setup as it is right now but use a proxy server to share internet access.

I've used this freeware in the past with good results:
http://www.analogx.com/contents/download/Network/proxy/Freeware.htm

It's not as simple as ICS in terms of sharing internet, but all you have to do is go into the browser settings of all the client computers and configure them to use th... Read more

4 more replies