Computer Support Forum

web site causes ie close then reopen

Question: web site causes ie close then reopen

Upon closing an email an error comes stating "A problem with the web page has caused Internet Explorer to close and reopen. Windows 7 and Interner Explorer 9.

More replies
Relevance 100%
Preferred Solution: web site causes ie close then reopen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 69.7%

As a student, Windows Ink is a good assistant to be, but it would no respond when I click the button when I closed it previously, which need a restart to solve. do you have the same problem? my device is SP3

Answer:Can't reopen ink workspace sometimes when I close it

The OS edition is 14393

1 more replies
Relevance 69.7%

I open email and when i go to close out the page i get a message stating "a problem has caused internet explorer to close and reopen the tab". Please help.

Additional info: Windows 7 and Internetr Explorer 9
 

More replies
Relevance 69.7%

whenever i open and close Ie and try to reopen i get the "cannot find server" message for every site.  Also if i stay on IE for more than an hour or so I get the message  and i cannot connect to AIM or any other program that uses the internet. PLEASE HELP. This is very annoying and gets in the way of my work.  Any help would be GREATLY appreciated.

Answer:When I close IE and try to reopen it i get a error

Do you have virus protection? Spyware protection? Which connection are you using? (Dial-up, DSL, Cable, etc.) Also, which operating system are you using?[glb]Flame[/glb]

2 more replies
Relevance 69.7%

I'm using safe mode w networking at the moment to get onto the net right now, but in normal mode, I open IE and whilst it will initially load my home page with no problem, after a few seconds it will "Recover" or try to recover the tab, and will do this repeatedly until IE freezes. I've run MBAM and it hasn't helped, and I've tried various troubleshooting processes. The internet connection appears to be OK (I'm using wireless, not LAN). Can anyone help with this? It was working fine up until about 2pm this afternoon when I left it in standby for a few hours, but when I picked it up about half 6, I suddenly found IE wasn't working.I'm running IE8, and I'm using an XP Home Edition OS. Can someone help? Thankyou!

Answer:IE keeps trying to close and reopen pages!

Did you try different browser?

5 more replies
Relevance 68.88%

i have been repeatedly receiving the message "windows explorer has encounter a problem and has had to close" windows explorer then closes leaving only my desktop image and opens again as it was before the error. think there might be a problem whats linux like these days??

Answer:windows.error.close.reopen.***!

do you have kodak software?

http://support.microsoft.com/?kbid=320563

if not...


i would run a disk check and then do the 5 step procedure in my sig

good luck

11 more replies
Relevance 68.88%

Hello,
I am a network admin deploying Windows Server 2008r2 with Internet Explorer 9 as terminal servers, I am having trouble with an ActiveX element in one of our internal pages. The page requests the CAB file with three files being an INF, OCX &
a DLL. 
Running the page as an Administrator. Opening the page for the first time, IE hangs as it gets the CAB file and then will present UAC to allow it to install the ActiveX as an Add On for IE. Each time you come to the page after it will work fine. 
Running the page as a user, Every time the user access the page after logging on IE hangs and then will put a red cross in the ActiveX section of the page. If you then close and reopen IE it will then allow the ActiveX element of the page to work fine. The
issue is that the user would have to do this each time they logged on. 

Why does the page not work first time the users access the page?
Regards,
Mark

More replies
Relevance 68.88%

i have been repeatedly receiving the message "windows explorer has encounter a problem and has had to close" windows explorer then closes leaving only my desktop image and opens again as it was before the error. think there might be a problem whats linux like these days??

Answer:windows.error.close.reopen.***!

do you have kodak software?

http://support.microsoft.com/?kbid=320563

if not...


i would run a disk check and then do the 5 step procedure in my sig

good luck

11 more replies
Relevance 68.47%

msvcr.dll crash internet explorer 11Problem signature: Problem Event Name: APPCRASH Application Name: IEXPLORE.EXE Application Version: 11.0.9600.17689 Application Timestamp: 54e68526 Fault Module Name: KERNELBASE.dll Fault Module Version: 6.1.7601.18409 Fault Module Timestamp: 53159a86 Exception Code: c0000005 Exception Offset: 0002eb3b OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033

Answer:A problem with this web page caused IE to close and reopen

You could try IE Reset, "IE > Tools > Internet Options > Advanced > Reset button". You lose your add-ons but they soon come back with usage. Your favorites etc are retained.Is this only on one webpage? If so give us the link in case that tells us something.If you have an alternative browser does it happen on there too?I suppose malware is a vague possibility but it doesn't obviously fit the symptoms.Always pop back and let us know the outcome - thanks

8 more replies
Relevance 67.65%

Hey everyone,

I'm a college kid who has been having major issues with my laptop, I'm desperate for some help.

The problems:
My Wifi cuts out at random, and after that my laptop won't reconnect- or connect to any wifi- until I either close the lid, wait for the green light to go off, then reopen, or I restart. This always temporarily fixes the problem. (This actually happened when I first tried to submit this post, so I have to retype the whole thing . This happens within anywhere from 10 minutes to a few hours from when I reconnect to wifi, and it seems to be somewhat correlated to me opening new tabs (or submitting a new post ). I don't use my laptop for anything other than casual browsing and school work, so I don't have any weird programs that might cause this. No single event started this, but it's been happening for months. I'd really appreciate any help.

My system info:
OS Name Microsoft Windows 10 HomeVersion 10.0.14393 Build 14393Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Name DESKTOP-8UUH9ORSystem Manufacturer ASUSTeK COMPUTER INC.System Model X751LABSystem Type x64-based PCSystem SKU ASUS-NotebookSKUProcessor Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2197 Mhz, 2 Core(s), 4 Logical Processor(s)BIOS Version/Date American Megatrends Inc. X751LAB.507, 12/7/2015SMBIOS Version 2.8Embedded Controller Version 255.255BIOS Mode UEFIBaseBoard Manufacturer ASUSTeK COMPUTER INC.

DirectX 12
Intel(R) HD Graphics 5500.

Let me know if I need ... Read more

Answer:WiFi disconnects, must close and reopen laptop to reconnect

Welcome to the forum. Is this at college or home?

12 more replies
Relevance 67.65%

I am uusing Internet Explorer 11 with Windows 7 Ultimate and have been getting the error message: "A problem with this webpage caused Internet Explorer to close and reopen the tab." on a variety of websites. At the suggestion of some troubleshooting sites I have uninstalled Silverlight and reinstalled it --- this seems to make a temporary fix, but in a couple of days the problem returns. I have done the same with JAVA with no change.
The problem seems to reside in Internet Explorer, since it does not occur with I use Firefox. Anyway, the error slows down my computer when using the web.
 

Answer:Solved: A problem with this webpage caused I.E. to close and reopen the tab.

9 more replies
Relevance 67.65%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD A6-5200 APU with Radeon(TM) HD Graphics, AMD64 Family 22 Model 0 Stepping 1
Processor Count: 4
RAM: 3522 Mb
Graphics Card: AMD Radeon HD 8400, 512 Mb
Hard Drives: C: Total - 702679 MB, Free - 669170 MB;
Motherboard: AMD, Larne
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
Computer is only 1 year old, just started kicking me off web sites with different reasons ie: Explorer stopped working, Problems with web site caused tab to close and reopen, some others I can't remember but it is happening too frequently!
 

Answer:Messages, ie: Unexpected problem caused tab to close and reopen, and others

I would uninstall McAfee and run the McAfee Removal Tool. You can reinstall it, if desired, after testing.

If the above does not fix it try an IE reset.
 

1 more replies
Relevance 66.83%

After I open the lid and the tablet starts getting out of sleep mode, the blue screen appears with the following error message: SYSTEM_THREAD_EXCEPTION_NOT_HANDLES (rtwlanu.sys) Any ideas what is causing this and how to resolve it?













Solved!

Go to Solution.

Answer:After Windows 8.1 Upgrade, Lenovo Yoga 13 crashes when I close the lid and reopen it

I've got same problem http://i.imgur.com/C6py9t0.jpg

9 more replies
Relevance 66.83%

I have a Gateway Laptop with Windows 7 Home Premium, Service Pack One. It is a 64 bit operating system. 1.7GHZ Processor. 8.00 GB RAM. I have been using Microsoft Internet Explorer 11 on a Gateway Computer with Windows 7 Home Premium Service Pack 1 and 64 bit.
Recently when I loaded the program it would turn on then shut down and I get this message "A Problem with this webpage caused Internet Explorer to close and reopen the tab." I have no control over the page, it keeps opening and closing. The only to stop it s to go to Task Manager and end the program several times.
Any Suggestions on a fix for this problem. It does not matter which page it tries to open. I can only change pages by going the Change Home Page inthe control Panel when IE 11 is not running.
Thanks
George

Answer:A Problem with this webpage caused Internet Explorer to close and reopen the tab

Open Internet Explorer in Safe Mode without Addons. Browse some sites. If you find that you do not now face any problems, it means that one of your IE add-ons is creating a problem.
Use the IE Addon manager to disable the add-ons one after the other and try to find the offender. To manage browser add-ons in Internet Explorer, open IE and press Alt+X to open Tools. Here you will see Manage add-ons. Click on it Once you have identified it disable ot remove the addon. Details - Manage Browser add ons..
Run AdwCleaner to see if you have any malicious add-ons installed.
If nothing workw, you may need to Reset Internet Explorer settings to default.

1 more replies
Relevance 56.58%

I am trying to get a .bat file to first close then reopen a .exe file when i use the code below and click the .bat it says it cannot understand the "taskkill" bit

can anyone see why ?

cheers
taskkill /IM/F ****.exe
color 0A
"C:\SG 5\****.exe"
pause
 

More replies
Relevance 52.48%
Question: Close site?

How do you close the site? There is not any Min, Max Close button. I don't want to go all the way back to the start screen just to the last open site I was in. Same thing in Facebook How do you close it so you can go back to where you were suck as email or home page?

Answer:Close site?

Hello John,

If you mean in the Metro version of IE10, then the tutorial below can help show you how to open and close tabs in it.
Internet Explorer 10 Metro - Open and Close Tabs in Windows 8
The tutorial below can help show you how to close Store apps including the Metro IE10.
Apps - Close in Windows 8
Hope this helps,
Shawn

5 more replies
Relevance 51.66%

I'm a member of Ancestry.com. Almost every time I've finished visting the site, IE7 won't close. The page content goes away (screen turns white) but the IE7 window stays open. I must use Task Manager to close IE7. It only happens at the ancestry.com website too.

I disabled all add-ons but it didn't help.

Any assistance will be greatly appreciated. Thanks.

Answer:IE7 Won't Close (Site Specific)

I've seen this behavior on a friends PC. He needed to logout before closing IE.

Does Ancestry.com have a logout for your account?

3 more replies
Relevance 51.66%

When I want to close web site ,nothing happens,I have to go in task manager and stop program from running
Any fix for it ?

Answer:[SOLVED] Can't close web site

problem solved

2 more replies
Relevance 51.25%

When I go to a site and leave it by clicking on the (x) in the top right hand corner of the screen, the site goes away.  when I click on the icon at bottom of screen to pull up my home page, the last site I was viewing reappears.  Also when I try to clear history, I go through the steps but history doesnt clear.  I'm computer illiterate, think they are great tools but I let myself get covered over by it.

More replies
Relevance 42.23%

How do i reopen onekey theater? I tried to manually open it from the onekey theater directory, but no response. I tried to restart my computer but still wont work. I did not suspent it from startup. This laptop is new and this software is working fine up until I accidently pressed the "hide" option, and now its icon is gone from the taskbar.

Answer:How do I reopen Onekey Theater??

HiWhich laptop do you have? And which os? Do you have the touch sensitive key for the OKT?By the way, you can try reinstalling it





Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

2 more replies
Relevance 42.23%

Hello,
I have an excel 2000 file (size: 12.5MB). The file is stored on a NT file server. The server is connected on a switch (A). The client PC that tried to access the file is on a BNC cable connection that connects to a 10Mbps hub and this hub connects to another 10Mbps hub and this hub goes to the switch (A). The problem happened when the user tried to update the Excel file. He opened it from the server. He made some modifications to the data and then he pressed the saved button. Excel 2000 begun saving (file.xls) and finally the following error message appeared on screen: "DOCUMENT SAVED SUCESSFULLY. CAN NOT REOPEN THE SAVED DOCUMENT DUE TO LOW MEMORY. PLEASE CLOSE THE DOCUMENT". If I press OK button then the document will be damaged and will not be opened again, so I tried to save it again. I pressed the save option but instead of saving it, I noticed that the SAVE AS dialog box appeared. I thought that something wrong is going on. I saved the Excel file on the SERVER using another filename (file2.xls). The saving process was successful. I closed Excel 2000 and I loaded again. I tried to open the Excel file (file.xls) but the opening failed with the following error message: "FILE file.xls is not in recognizable form ". After that I tried to open the file2.xls and I SUCCEEDED IN OPENING IT WITHOUT PROBLEMS.

CLIENT PC SPECIFICATION: Pentium III 500 Mhz)
RAM 128MB)

Question 1: Is the problem to do with the NETWORK?
Question 2: Is the problem to do with... Read more

Answer:CAN NOT REOPEN THE SAVED DOCUMENT DUE TO

Day: To my knowledge this has to do with network refresh not being done often enough. But I'm not a network person, so I really have no idea!

------------------
~dreamboat~
Brainbench MVP for Microsoft Word
Brainbench
 

2 more replies
Relevance 42.23%

After closing the ie with many tabs today i want to open all the tabs the next day using the optin TOOLS > REOPEN LAST BROWSING SESSION. But in my browser under tools, the checkbox for the optin DELETE BROWSING HISTORY ON EXIT is checked and it is disabled. to work the otptin REOPEN LAST BROWSING SESSION first this checkbox was unchecked since it delete all the history when ie was closed. but to unchek it is disabled. How to enable the otption DELETE BROWSING HISTORY ON EXIT with check box.

Answer:IE8 Reopen Last Browsing Session

Which Browser?

3 more replies
Relevance 42.23%

I have recently upgraded to Office Pro 2003. My problem is that Outlook will only open once. If I close Outlook I can't reopen it without rebooting the PC. I can see the icon in the notification area by the clock but when I try to right click this I get nothing. Double clicking it gets a pop up balloon saying "Outlook is not responding. If you are using an Exchange Server e-mail account you can cancel pending server requests by clicking Outlook icon in the notifications area and then clicking Cancel Server Request on the shortcut menu"Any help???

Answer:Outlook 2003 won't reopen

Try Detect and Repair on the Help menu.

6 more replies
Relevance 42.23%

Hello,

I clicked the X when it asked if it should load previous session and all my IE8 tabs I had open before the crash was lost.
When I open up IE they doesn't reopen. I've tried "reopen last session" from the Tools menu but with no luck.

Seems like they still are stored in AppData\Local\Microsoft\Internet Explorer\Recovery\Active (.dat files) but how do I make IE to open them?

Answer:Reopen lost tabs in IE8

There was a change from IE7 to IE8. Now when you reopen IE, you have to reopen the tabs from your "Favorites" bar. Another good reason to switch to FF.

5 more replies
Relevance 42.23%

HiI have created my Java application as service,In that I have called UI method from task_init() .First time when i install all works fine.UI also opened.But the problem is once I closed the UI,i am not able to open it again.Could You please tell me how to resolve thisRegardsDivya R Dharan

Answer:JavaExe -Once I closed UI ,how will reopen it

hi,to run manually the UI part, call your .exe with -startServiceUI in argument : MyApp.exe -startServiceUIbut not from your service. The service can't run any UI nor run an app which has one.If your service is created as AUTO START, then the UI part will be automatically run when the user logon.

2 more replies
Relevance 42.23%

I'm running Windows Vista on a Dell XPS410. When I close Internet Explorer or Microsoft Outlook, I often (but not always) get a message "Internet Explorer (or Microsoft Outlook) has stopped working" and then the program will reopen by itself. As Outlook reopens, I get a message that it was not closed properly and it's checking for errors, and lately I'm also asked if I want to reopen in Safe Mode. Occasionally I'll get a message that IE has stopped working even when I don't close it myself, and all pages will close.

Not sure if this is a related problem or not, but occasionally I have emails that stay in the outbox even after sending (and stay open on the monitor after I hit "send"), but they also show up in the Sent box, so it's difficult to know if they actually were sent. I believe (but I'm not sure) that it's only happening when they have multiple photos attached, so they are large emails and I'm sending them on a 28.8k dialup modem, if that makes any difference.

Thanks for any help!
 

More replies
Relevance 42.23%

Can anybody get me in contact with Acer? I want to reopen my support case because my laptop is starting to die again, even after they "fixed" it.
 
Because my warranty is supposedly a week out of date I am unable to get in contact with a single person from Acer to tell them to reopen [edited for privacy] because their support clearly did not solve the problem. I am experiencing the exact same problem that led to my needing to send in my laptop. It is worsening and probably going to lead to a huge nasty crash again.
 
And I have reason to believe that the cause is bad hardware that my Acer Aspire Nitro was shipped with, because THIS time, when I saw the BSODs, I looked them up. I've been receiving a "Kernel Data Inpage Error" which apparently means that my memory or my hard drive is faulty. (And yes, I did the recommended things on that page. Nothing has helped or identified a problem. At all.)
 
This issue SHOULD be covered under warranty, not only because it is an issue that started during the year of warranty, but ALSO because Acer claimed to have fixed the issue but DID NOT, and ALSO because their warranty clearly states "Acer warrants that its Products will be free from defects in materials and workmanship for the Limited Warranty Period" and my computer CLEARLY CAME WITH FAULTY HARDWARE.
 
My SNID is [edited for privacy]. My case is and was [edited for privacy]and I believe I have the right to continued Acer support in this ma... Read more

Answer:I need to reopen an issue with acer

Hi lsilich04,
 
We have to have some date for the warranty to end, but we certainly aren't interested in leaving you out in the cold less than a week out. I was able to locate your information and the US service team updated the warranty through the end of the month. This will allow you to contact and setup services as needed.
 
In reading your post, I would have to disagree that a kernel error means a hardware error. The Kernel is part of the core of the Windows operating system and is completely software, when that crashes, it would result in the bluescreens and lockups. When your unit was in originally, I show that memory tests and hard drive tests were done, and a reload of the operating system corrected the issue. Now, after 3 months, you're starting to experience blue screens again, and I would suspect that some corruption has occured in the operating system. With all of this said, I would suggest attempting a recovery first, see how the system behaves. If there was a hardware error, it would also fail during the recovery process.
 
Alt-F10 (outside of Windows) recovery: http://acer.custhelp.com/app/answers/detail/a_id/35232
Windows Recovery: http://acer.custhelp.com/app/answers/detail/a_id/26281
 
Hope this helps,Cory

3 more replies
Relevance 42.23%

Hi,
I have an Acer aspire 2930 and when I close the lid and then reopen it, it won't fire up again. I have to power down and re-boot to get it to work again. I've checked the power settings and they are set to sleep mode when the lid is shut.
Any assistance would be really appreciated.
Thanks T.
 

Answer:Laptop won't fire up when I reopen lid

We have a latitude that requires momentarily pushing the power button to wake it up, does that work for you?
fine line on how long to press PB
 

3 more replies
Relevance 42.23%

Given the serious nature of some questions here, mine seems silly. Yesterday I received and opened up new laptop with Windows 8. New experience for me. Without realizing what it was, I set up and then closed my
Windows account. I realize now I need to keep it open. Can you tell me how to reopen the account?
Thanks, Markfm3213

Answer:Reopen Windows account

Hello Mark, and welcome to Eight Forums.

If you meant that you "closed" your Microsoft account as in to deactivate it like in the tutorial below, then no worries. You can reactivate your Microsoft account by signing in it again online at Microsoft within 365 days of closing it.

Microsoft Account - Close




Hope this helps,
Shawn

1 more replies
Relevance 42.23%

I am using Windows 8 with IE10 and for some weird and wonderful reason, the "reopen last session" is greyed out. I saw on the Windows 7 forum that there was a download fix for that but didn't dare to take that on for Windows 8.
Any ideas as to a simple fix for this snag?

Answer:Reopen last session greyed out

Hello Gloosecap,

The Reopen Last Browsing Session option would only not be grayed out if there was an actual last session to reopen. If you cleared your browser history after closing IE10, then there will be nothing to reopen.

If that wasn't the case, then you could use OPTION ONE in the tutorial below to enable Reopen Last Browsing Session in IE10 to see if that may help.

Internet Explorer Reopen Last Browsing Session - Disable or Enable - Windows 7 Forums

Hope this helps,
Shawn

16 more replies
Relevance 41.82%

for the last few days, the explorer closes and reopen itself immediately. this happens both on my Home PC and Work PC.

anybody experiencing this too?

see screenshot: Explorer opening twice (when locating a file) (from reddit)

Answer:File Explorer closes then reopen

Yes, had it happen quite often, was very annoying. Found this fix and it worked like a charm, has not come back even after applying updates.

Give it a go.

http://winaero.com/blog/fix-file-exp...in-windows-10/

6 more replies
Relevance 41.82%

I'm running Word 2000 under XP Home. Every time I retrieve a document from a folder or the Recently Used folder, I have to click on the page even if I do not want to alter the document in any way. Failure to remember to do this results in Word freezing and I have to close the programme through the Task Manager. Any solutions out there?

Answer:Word freezes when I try to to reopen a document

In Word, try Detect and Repair on the Help menu.

1 more replies
Relevance 41.82%

I'm running Word 2000 under XP Home. Every time I retrieve a document from a folder or the Recently Used folder, I have to click on the page even if I do not want to alter the document in any way. Failure to remember to do this results in Word freezing and I have to close the programme through the Task Manager. Any solutions out there?

More replies
Relevance 41.82%

In a situation where I have a grouped set of windows (Chrome, Skype, EtC.) and have to minimize any of them, it's a hassle to open them again. I can get windows to open the previews by clicking on the group, but anything within the previews won't work. Right click closes previews. Left click closes previews.
Mind you, I can still get to them. Alt+Tab works, as does Super+Tab. It's just annoying to always have to go that way, especially as I'm using two monitors and have my taskbar on the one that makes it less obtrusive.
I can temporarily fix the problem by restarting, but it takes forever, and I just simple don't like having to restart. I will every once in a while, but again, it doesn't fix the problem. It just delays it.
 
The only potential cause I can figure out is when I do have to close chrome, I tend to do it by ending the task. This ensures I can recover my tabs that I had open. I don't know if this is the cause, but it's the only thing that seems potentially related, simply due to it being done in relative close proximity to the problem showing up.
 
I've tried restarting the desktop management system (DWM), changing themes, disabling and reenabling grouping. Nothing is fixing it.
 
Again, I can get by without it... it's just a major annoyance, and a block to productivity.
 
Also, if it's a single window, clicking on the task bar icon opens the windows. Once it's a group, then I'm screwed.

More replies
Relevance 41.82%

Hi- I will be very happy if someone can help me olve this mystery-

I'm using windows ME and IE 6.0- when i try to save a jpeg- the only file type that i can save it as- is a bitmap. If I try to open this "bitmap" that I have save to my disk- i get the "download file" dialog box that tells me that I am trying to download the file from my own hard drive- there is no way for me to open the file. Any ideas, anyone?

Thank You!
 

Answer:IE saves all pics as bitmaps and won't let me reopen them

Can't really help you out much.
But there is a way to save in other formats.
In the name box add the image type to the name.

Like this Mypicture.jpg.
On the box that says file type it does not matter what it says when you add the file type to the name.

Now I have 1000's of .jpg files and only 6 .jpeg files. Some image programs will not open the .jpeg so don't use it. Use the .jpg.

Where are you getting these images from?
Are you sure you saved them as a image file or did you save the link to the images?
 

2 more replies
Relevance 41.82%

updated a2 free today and it won't reopen, it requested a restart of the program and that was it, have deleted it now and downloading a fresh copy to see what happens this time

Answer:updated a2 free today and it won't reopen

I got rid of the full (paid for) version because of things like this. It was frought with issues after updates and eventually I just had enough, and told them so.If it's going to continue with the free version (which I now use)then that will go as well.Thanks I will see what happens tonight.

3 more replies
Relevance 41.82%

I was good surprisingly of new feature/bug solved of new MS Edge browser after my Win 10 has been updated, anniversary updating. But I noticed that "Reopen closed tab" functionality doesn't working anymore ... it is something wrong with my PC or you have the same issue too ?

Flaviu.

Answer:Reopen closed tab not working anymore

I wonder if MS Edge team are looking here ...

4 more replies
Relevance 41.82%

I just wrote a long post and it disappeared while trying to run that spell check on it. Very annoying.

Here, again, is my problem:

When I close IE 8 or 9 with several tabs open, and later reopen it, the option to reopen or restore the last browsing session is ALWAYS grayed out in both the menu under Tools and on the New Tab pages.

I had a nasty rootkit infection of volsnap.sys that was mostly affecting IE, which was detected and removed by ComboFix with help from MajorGeeks, just a week or two ago.

Since it was always changing the mischief it did, mostly regarding IE, I suspect that "part of it" is still on my machine.

A MS support forum led me through several steps to try to fix this, including uninstalling and reinstalling IE 9. Then they gave up and said I had to reformat my HD and reinstall my OS. I suspect that wouldn't be enough...

I really depend on this function, and have used IE for many, many years, and don't want to switch browsers. Can anyone help?

Thanks in advance,
Barb
 

Answer:reopen last browsing session grayed out in IE

Reformatting and reinstalling your OS most definitely will get rid of any nasties present on your system. If you do a clean install, as suggested, I'll be your browser's behavior returns to normal.
 

6 more replies
Relevance 41.82%

Hello,
I have an excel 2000 file (size: 12.5MB). The file is stored on a NT file server. The server is connected on a switch (A). The client PC that tried to access the file is on a BNC cable connection that connects to a 10Mbps hub and this hub connects to another 10Mbps hub and this hub goes to the switch (A). The problem happened when the user tried to update the Excel file. He opened it from the server. He made some modifications to the data and then he pressed the saved button. Excel 2000 begun saving (file.xls) and finally the following error message appeared on screen: "DOCUMENT SAVED SUCESSFULLY. CAN NOT REOPEN THE SAVED DOCUMENT DUE TO LOW MEMORY. PLEASE CLOSE THE DOCUMENT". If I press OK button then the document will be damaged and will not be opened again, so I tried to save it again. I pressed the save option but instead of saving it, I noticed that the SAVE AS dialog box appeared. I thought that something wrong is going on. I saved the Excel file on the SERVER using another filename (file2.xls). The saving process was successful. I closed Excel 2000 and I loaded again. I tried to open the Excel file (file.xls) but the opening failed with the following error message: "FILE file.xls is not in recognizable form ". After that I tried to open the file2.xls and I SUCCEEDED IN OPENING IT WITHOUT PROBLEMS.
CLIENT PC SPECIFICATION: Pentium III 500 Mhz)
RAM 128MB)

Question 1: Is the problem to do with the NETWORK?
Question 2: Is the problem to do with ... Read more

Answer:{Advice Offered} - Can Not Reopen A Saved Doc Due To?

You need to change the paging memory or even the virtual memory.

Aj
 

2 more replies
Relevance 41.82%

Hello,

I am in need of some assistance with my IE 10 browser, but the problem only happens while using the default MSN homepage.

After closing the web browser a number of times while on MSN, multiple browsers will suddenly reopen. I have noticed that when the browsers reopen, the url is a little different from the original. Here is an example of what some of the urls might look like below.

MSN.com

But when I change my default homepage to another search engine, such as google, yahoo, or bing, this problem does not occur. It only happens on the msn website.

Just today, I have discovered what is causing the browser to do this and it is the TrueSuiteService application that is part of the HP Simplepass program that is already pre-installed on my laptop. When disabled, the problem no longer occurs. However; when it is enabled, the problem will reoccur after a certain amount of times opening and closing the browser.

Here is a screenshot of the application disabled below.



But, here are two screenshots of all the applications that are enable on startup.





Either way, I am unsure of which direction I should take to solve this matter completely. Please help me.

Thank you for your assistance.

Answer:Multiple IE 10 Browsers Reopen After Closing (MSN Only)

Hi Sara welcome to Seven Forums,
I'm glad you took my advise in asking your question here,
Hopefully someone can help soon with your interesting problem, and loaded startup menu,
Cheers.
Multiple IE 10 Browsers Reopen After Closing Default Homepage (MSN - Microsoft Community

Quote from the other thread,
I followed the instructions within the clean boot about background applications and it worked. I discovered that the background TrueSuiteService application from HP in the services tab was what was causing the problem. After disabling it, I no longer had multiple browsers opening up. However, it still boggles my mind that how come it would be this application causing this issue? Also I notice that all the HP products are labeled "Hewlett-Packard Company" in the manufacturer status however; the disabled application is only labeled "HP" as the manufacturer? Could this possibly be a hidden virus on my computer? If so, how do I remove it? end of Quote

9 more replies
Relevance 41.82%

I was good surprisingly of new feature/bug solved of new MS Edge browser after my Win 10 has been updated, anniversary updating. But I noticed that "Reopen closed tab" functionality doesn't working anymore ... it is something wrong with my PC or you have the same issue too ?
Flaviu.

Answer:Reopen closed tab not working anymore

I would think it's the OS and probably not your PC. I've been having more problems and glitches than ever after the recent updates, especially with Edge. I totally reset my PC, reinstalled everything manually and all was good for about 10 days but now all of a sudden Edge has gone weird again and non of the extensions will work.... AGAIN!.... I love Windows 10 but my patience is getting very thin after constant glitches on production updates as I use it for my work/business. I've actually had fewer problems with W10M on both production and insider releases...

1 more replies
Relevance 41.82%

Everytime I close the Lid, when I open it again the touchpad doesn't work. I have to restart or put the computer in to sleep in order to the touchpad start working again.  











Solved!
View Solution.

Answer:Touchpad doesn't work after reopen the lid.

I solved my problem! I unistaled the Synapatics PS/2 driver 19.0.12.95Thouch pad contiued to work without the driver and now I finally can close the lid and open it again and use the touchpad straight away.    

5 more replies
Relevance 41.82%

I've upgraded to Windows 10 and so far so good. I'm not sure if this is a question for W10 or for the Edge browser...? When opening the browser, I used to be able to see the Top Sites visited, and reopen closed tabs, sometimes even the previous session, and also sites visited on my Windows Phone. Now, I only get 'Top sites' and the MSN news feed. So far I can only find settings to set to open new tabs to Top Sites or a blank page. I'd prefer to be able to easily find recently closed tabs rather than searching through history. And being able to see and open sites from Windows Phone was nice, why is that no longer available?

Answer:How can I reopen closed tabs in Edge?

I guess IE11 could sync my desktop with my other devices including my phone. Not seeing any settings for this in Edge.

4 more replies
Relevance 41.82%

http://www.techsupportforum.com/secu...wn-laptop.html

OTL logfile created on: 5/26/2010 2:28:02 AM - Run
OTLPE by OldTimer - Version 3.1.39.0 Folder = X:\Programs\OTLPE
Microsoft Windows XP Service Pack 3 (Version = 5.1.2600) - Type = SYSTEM
Internet Explorer (Version = 7.0.5730.13)
Locale: 00000809 | Country: United Kingdom | Language: ENG | Date Format: dd/MM/yyyy

2.00 Gb Total Physical Memory | 2.00 Gb Available Physical Memory | 85.00% Memory free
2.00 Gb Paging File | 2.00 Gb Available in Paging File | 96.00% Paging File free
Paging file location(s): C:\pagefile.sys 2046 4092 [binary data]

%SystemDrive% = C: | %SystemRoot% = C:\WINDOWS | %ProgramFiles% = C:\Program Files
Drive C: | 149.04 Gb Total Space | 14.43 Gb Free Space | 9.68% Space Free | Partition Type: NTFS
D: Drive not present or media not loaded
E: Drive not present or media not loaded
F: Drive not present or media not loaded
G: Drive not present or media not loaded
H: Drive not present or media not loaded
I: Drive not present or media not loaded
Drive X: | 433.24 Mb Total Space | 0.00 Mb Free Space | 0.00% Space Free | Partition Type: CDFS

Computer Name: REATOGO
Current User Name: SYSTEM
Logged in as Administrator.

Current Boot Mode: Normal
Scan Mode: All users
Company Name Whitelist: Off
Skip Microsoft Files: Off
File Age = 30 Days
Output = Standard
Using ControlSet: ControlSet002

========== Win32 Services (SafeList) ==========

SRV - File not found [On_De... Read more

Answer:Trojan shut down laptop (reopen)

BUMP, please.

3 more replies
Relevance 41.82%

I was good surprisingly of new feature/bug solved of new MS Edge browser after my Win 10 has been updated, anniversary updating. But I noticed that "Reopen closed tab" functionality doesn't working anymore ... it is something wrong with my PC or you have the same issue too ?

Flaviu.

More replies
Relevance 41.41%

I have a Dell LatitudeD400 with Windows XP. Whenever I close my laptop to do something for a short time (with it still being on)- and reopen it- is flashes a blue screen for short time (short enough that I cant see what it says) - and then it restarts. The computer works fine and it has been doing this since I got it two years ago.

If I go to Standby manually, by going to start->shut down computer->standby it works fine. I just have to leave the lid open the whole time and when I press the power button, type my password, and all is well. No idea what is going on...

Answer:[SOLVED] Laptop restarts (bluescreen) when I reopen it

Hi
Download and run this application: BSOD_XP_v1.3_jcgriff2_PROD.exe.
Once it has finished running zip the folder TSF_XP_Support which can be found in your Documents folder.
Attach the zipped file to your next post.

19 more replies
Relevance 41.41%

I have Windows 8.1 using IE11 and I am unable to reopen browsing history. It is always gray shaded. It doesn't matter how I close it or if I reboot. If I close IE and reboot, it's gray shaded. If I don't close every tab - just leave them all open and close IE - then open IE again without restarting, it is gray shaded.

I seen some other posts about this that aren't quite the same problem (and/or haven't been resolved) and someone mentioned that it's gray shaded because there is no browsing history to reopen. Trust me, there is. I don't delete my browsing history after each session. Besides, everything is in my history folder - my browsing history is just fine. I just can't reopen previous sessions.

I have not been able to find help anywhere so I thought I'd finally ask.

More replies
Relevance 41.41%

wuauclt and associated files slow my 'puter down to a crawl. In Task Mgr in a Svchost.exe, Wuauclt.exe is the memory hog. I can stop it and Wuaueng.dll and things are fine. Not sure if it will stick.
What is the long term solution to the Wuauclt.exe problem?

Answer:wuauclt slows computer, reopen's itself. How to disable

Please perform the following, so that we can get the exact specs of your computer. This will better assist us in helping you more.Publish a Snapshot using SpeccyThe below is for those who cannot get onlinePlease take caution when attaching a text file to your post if you cannot copy/paste the link to your post, you will need to edit it to make sure that your Windows Key is not present.

1 more replies
Relevance 41.41%

Hi

Avast keeps popping up saying its blocked a harmful file, some it moves to the chest, some it just blocks. I have screenshotted the avast chest should you need it, one of the issues seems to be a type of windows update file in WIN32??? I run XP SP3 still.
I have run DDS.
DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702
Run by Dianne Fox at 21:40:58 on 2015-05-12
Microsoft Windows XP Home Edition 5.1.2600.3.1252.44.1033.18.1535.622 [GMT 1:00]
.
AV: AVG AntiVirus Free Edition 2014 *Enabled/Updated* {17DDD097-36FF-435F-9E1B-52D74245D6BF}
.
============== Running Processes ================
.
C:\WINDOWS\Explorer.EXE
C:\Program Files\AVAST Software\Avast\AvastSvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Google\Update\1.3.26.9\GoogleCrashHandler.exe
C:\Program Files\Common Files\AVG Secure Search\vToolbarUpdater\18.1.0\ToolbarUpdater.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\AVAST Software\Avast\AvastUI.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Common Files\AVG Secure Search\vToolbarUpdater\18.1.0\loggingserver.exe
C:\WINDOWS\system32\wbem\wmiprvse.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\System32\wbem\unsecapp.exe
C:\Program Files\... Read more

Answer:Avast detecting multiple issues Reopen please

Hello and Welcome to TSF.

If you haven't already, please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate.

Please stay with me until given the 'all clear' even if symptoms seemingly abate.

Kindly follow my instructions and please do no fixing on your own or running of scanners unless requested by a helper.

------------------------------------------------------

If there are any personal files, pics, etc. on your computer you cannot live without, back them up now just as a precaution.

Emergency Backup Procedure - Tech Support Forum

------------------------------------------------------

You are using an outdated version of HijackThis. Please uninstall HijackThis 1.99.1 in the Add or Remove Programs section of your Control Panel and delete your current version.

------------------------------------------------------

You have remnants of AVG still running on your machine.

Please download AVG Remover and Save it to your Desktop.Close all programs and double-cl... Read more

19 more replies
Relevance 41.41%

my microsoft word, excel, powerpoint, etc. doesn't re-open after i close the document (even after i save it).

i have to leave my computer on all night or email it to myself as an attachment and copy&paste a document everytime i need to continue working on a paper.

please help me. i'm not technically challenged, but i'm not that great either. help would be greatly appreciated
 

Answer:all microsoft office documents can't reopen once closed

12 more replies
Relevance 41.41%

After using MS Outlook and closing it, it appears to stay resident as a process and the only way I can reopen it is to delete the resident process(es).
When I look at the resident processes I can see several examples of Outlook, Word and zclient still resident.
I think this has started to occur since I installed Windows XP service pack 3, but I'm not entirely sure.
Please help!:
 

More replies
Relevance 41.41%

I just downloaded internet explorer 9. Previously, I was using IE8. Every day, when ie8 would open up (it would load automatically at startup from AOL IM), I would go to Tools -> Reopen last browsing session, and all the tabs and pages I had open when I closed my previous session would load (though in reverse order left to right, annoyingly).

Now that I'm running IE9, when I go to Tools -> Reopen last browsing session, the option is greyed out - it does not work. The only time it works is if I close IE9 and then reopen the browser without rebooting. If I reboot, which I do every day, the option is not available like it used to be in IE8. (Seems like every time I download an updated version of anything anymore, something inevitably stops working or is worse than it was before - this soooo tiresome.)

I've tried a regedit I found somewhere on these forums - setting for 'turn off reopen last browsing session' to 'disable'. Didn't work.

I do not have IE9 set to delete my browsing history on exit.

I have the box checked for Automatically recover from page layout errors with compatibility view.

So, currently I'm out of ideas - can't find anything else.

I would really appreciate it if anyone who knows what is going on with this could share.

Answer:IE9 Reopen Last Browsing Session option is not working

So does anyone else have this problem? Since the Reopen Last Browsing Session is kind of a deal breaker, I would have thought that there'd be a fix by now. But maybe the fix is to uninstall IE9 afterall. So much for IE9. Firefox and Chrome do this anyway, correctly, even WITHOUT having to select an option. I'd skip IE altogether if I didn't need it for work.

1 more replies
Relevance 41.41%

Hi,
i often find myself closing a web page, then a little later that same session reopening it. Then, as i mainly rely on tethering my phone to my PC for internet, and have only a 2 GB data plan (which is all i can afford), i get concerned about whether each re-opening of a same page doubles its data consumption. (I searched the internet for any answers but could not find any. And the whole world of internet logistics is hopelessly baffling for me to attempt, though i spend countless hours trying!))

Thanks so much for any answers!
 

Answer:if you reopen a webpage, will it consume more cellular data?

8 more replies
Relevance 41.41%

I have this:

ERROR SIGNATURE:

Event Type: BEX
P1: chrome.exe
P2: 45.0.2454.85
P3: 55df88lb
P4: guard.dll
P5: 8.2.0.4674
P6: 55c148a3
P7: 000269c9
P8: c0000409
P9: 00000000

I have no other functional browser, am STILL using XP and read
somewhere, which I cannot find now, this may be COMODO related.
But I was lost in the technical lingo and I lost the reference, in
frustration trying to make sense of technical jargon.

Please help, if possible and if there is a doable fix of which someone
is aware, PLEASE lay it out very simply and straight forward.

Thank you,

KJW

Lost with no browser and an otherwise working internet connection
 

Answer:Google Chrome crashed, will not restore or reopen

For a whole stack of reasons you really need to get off XP just as soon as possible. In the meantime you can try using a different browser, or an older version of a different browser. Have a read HERE.
 

11 more replies
Relevance 41.41%

I let this thread expire. I was away, but still need help. I have posted the contents of rootkit unhooker below.

http://www.techsupportforum.com/f284...ml#post2837393



RkU Version: 3.8.388.590, Type LE (SR2)
==============================================
OS Name: Windows XP
Version 5.1.2600 (Service Pack 3)
Number of processors #2
==============================================
>Drivers
==============================================
0xB8D0F000 C:\WINDOWS\system32\DRIVERS\igxpmp32.sys 5763072 bytes (Intel Corporation, Intel Graphics Miniport Driver)
0xA7DCC000 C:\WINDOWS\system32\DRIVERS\lvuvc.sys 4653056 bytes (Logitech Inc., Logitech USB Video Class Driver)
0xA84C9000 C:\WINDOWS\system32\drivers\RtkHDAud.sys 4550656 bytes (Realtek Semiconductor Corp., Realtek(r) High Definition Audio Function Driver)
0xBF1F2000 C:\WINDOWS\System32\igxpdx32.DLL 2732032 bytes (Intel Corporation, DirectDraw(R) Driver for Intel(R) Graphics Technology)
0x804D7000 C:\WINDOWS\system32\ntkrnlpa.exe 2150400 bytes (Microsoft Corporation, NT Kernel & System)
0x804D7000 PnpManager 2150400 bytes
0x804D7000 RAW 2150400 bytes
0x804D7000 WMIxWDM 2150400 bytes
0xBF800000 Win32k 1863680 bytes
0xBF800000 C:\WINDOWS\System32\win32k.sys 1863680 bytes (Microsoft Corporation, Multi-User Win32 Driver)
0xBF04E000 C:\WINDOWS\System32\igxpdv32.DLL 1720320 bytes (Intel Corporation, Component GHAL Driver)
0xB9E44000 iaStor.sys 815104 bytes (Intel Corporation, Intel Matrix Storage Mana... Read more

Answer:search redirect virus - please reopen topic

Hello jimmyp68,

As it has been almost a week, I'd also like to see a fresh dds.txt. Please run dds.scr again, post the dds.txt and we'll get started.

19 more replies
Relevance 41.41%

For example, if I use the show desktop button on bottom right of taskbar, it minimizes all windows. If I then open up one window, normally just that window opens, however if there was a fullscreen/borderless windowed application running as well, it will also restore that window. Any way to prevent this?

More replies
Relevance 41.41%

Hi,

Im running windows 10 pro with the latest creators update.
I didnt have any problems but suddenly and it was before updating to the latest version of windows my edge is unresponsive after rebooting my system.

When I open edge after a reboot I can use the menus and scroll. When I load YouTube I can see the videos and scroll but cant open any of them I have to close edge and reopen it to fix the problem.

I made a reset, deleted edge and reinstalled, used ccleaner but the issue is not resolved.

Any help would be appreciated.

EDIT: Im not sure if it is related to my new gpu but I think the issue occurred after installing my msi 1080ti gpu but im not 100% sure....other than that no changes in my system.

Thanks!

More replies
Relevance 41%

Uh oh! In an attempt to solve a problem with an MS Office document, I went into Task Manager/Processes and closed Explorer.exe. It closed Office, but more importantly, it also closed my whole Desktop Shell!!! Now everything's gone, including my Start Menu and Task Bar. Please help! How can I get it all back ???? Thanks very much!

Answer:OOOOPS! Closed Explorer.exe in Task Manager. How do I reopen it?

Hit Ctrl + Shift + Esc to bring up the Task Manager.

Then in the Task Manager, click File, New Task (Run...).

Then type:

explorer.exe
Then click "OK."

9 more replies
Relevance 41%

hi does anyone have a solution to windows live mail refusing to reopen after being closed by clicking on the red x that method does not close the program it is still running in the task manager, and the only way to start is to go to the task manager and close it.any solution folks, i found that if you close it from the icon on the task bar

Answer:Windows live mail wont reopen a second tine

*Taken from click here It generally occurs when the send option "Upload Larger Images to the Web When Sending a Photo E-mail" is *un-checked*, but it does not usually manifest until a new compose window, or a saved draft has been opened.This option is available only when you are signed in, but if it is un-checked it still causes the shutdown bug even when not signed in. So make sure the option "Upload Larger Images to the Web When Sending a Photo E-mail" is *checked* at: Tools->Options->Send [tab] (available only when signed into Windows Live through WLMail).However, if you do find that "Upload Larger Images to the Web When Sending a Photo E-mail" is actually checked (which it is by default), then just uncheck it and click "Apply", then check it again and click "Apply" again. Some have had to do that to fix their WLMail shut down bug that was occurring despite that option having never been unchecked.

1 more replies
Relevance 41%

Hey
After opening office outlook 2007 in windows vista i am unable to unable to open it again after closing it. a grey office outlook icon appears in the bottom right hand corner of the screen. The only way i am able to open it again is by restarting the computer.

Cheers for any assistance
Dave

More replies
Relevance 41%

Hi guys...



Once I close a program if not..any other program. I try to re-open it and the little icon in the bottom right corner apears but the program doesn't exactly apear on my screen. why's this? I need to restart my computer to do it again.
 

More replies
Relevance 41%

I have tried upgrading from IE9 to 11 on both my Windows 7 computers. One worked with no problems, but the other gives repeated problems despite trying a number of things. I have uninstalled and reinstalled four or five times but the problems remain.
1. History gets wiped out and remains blank no matter how many sites I visit.
2. I have to re-enter user name/password every time I leave a site and return
3. If I click new tab it is always blank and the option to reopen last session is greyed out

I even tried IE10 but had the same problems.
Help!

Answer:IE11 history, password, reopen last session problems

Thought it linked with some settings...
Click these two links to know more
internet explorer reopen last browsing session disable/enable
-internet-explorer-reopen-last-browsing-session

2 more replies
Relevance 41%

Sorry for the lag. I was travelling, but am back on line now.HAVe performed all tasks as outlined in closed post[/b]Bit Defender Log - attached as HTML file - couldn't cut and paste sorryAVG Anti SPyware ReportAVG Anti-Spyware - Scan Report--------------------------------------------------------- + Created at: 12:28:24 PM 4/7/2007 + Scan result: :mozilla.138:C:\Documents and Settings\user1\Application Data\Mozilla\Firefox\Profiles\ozaydds5.default\cookies.txt -> TrackingCookie.247realmedia : Cleaned.:mozilla.139:C:\Documents and Settings\user1\Application Data\Mozilla\Firefox\Profiles\ozaydds5.default\cookies.txt -> TrackingCookie.247realmedia : Cleaned.:mozilla.140:C:\Documents and Settings\user1\Application Data\Mozilla\Firefox\Profiles\ozaydds5.default\cookies.txt -> TrackingCookie.247realmedia : Cleaned.:mozilla.141:C:\Documents and Settings\user1\Application Data\Mozilla\Firefox\Profiles\ozaydds5.default\cookies.txt -> TrackingCookie.247realmedia : Cleaned.:mozilla.142:C:\Documents and Settings\user1\Application Data\Mozilla\Firefox\Profiles\ozaydds5.default\cookies.txt -> TrackingCookie.247realmedia : Cleaned.:mozilla.178:C:\Documents and Settings\user1\Application Data\Mozilla\Firefox\Profiles\ozaydds5.default\cookies... Read more

Answer:Reopen Request - System Slow, But Can't Find Anything Wrong

Hi bongo jerry,Download CCleaner and install it. (default location is best). Do not run it yet! CCleaner Tutorial*******************************************In Normal Mode, select the following with HijackThis. With all windows (including this one!) closed (close browser/explorer windows), please select "fix.? These are optional fixes. The following are not necessarily spyware/malware, but I suggest you place a check mark next to the following entries, as these programs may be taking up system resources.O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE (Description: System Tray icon for the Realtek AC97 Audio Sound Manager for AC97 onboard audio. Available via Start -> Settings-> Control Panel. Removing this entry will free up a small amount of system resources. )O4 - HKLM\..\Run: [SunJavaUpdateSched] \"C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe\" (Description: Sun Java update scheduler. Checks for updates. Not necessary. Removing this entry will free up a small amount of system resources.)********************************************NOTE* CCleaner deletes EVERYTHING out of temp/temporary folders and does not make backups. Let's empty the temp files: Run CCleaner. DO NOT use the "Issues" block . It's ment for professionals. 1. Starting with v1.27.260, CCleaner installs the Yahoo Toolbar as an option which IS checkmarked by default during the installation.IF you do NOT want it, REMOVE ... Read more

2 more replies
Relevance 41%

Something odd just happened. After installing the latest set of patches today and rebooting. After I logged back in all of the previous programs I had open before the log off started back up automatically. Does anyone have any explanation for this behavior? I don't want this to happen.

Answer:Apps reopen themselves after first login after patch Tuesday update

Hello Bob,

This would be the new behavior in the Windows 10 Fall Creators Update.

If you like, the information at the top of the tutorial below can provide workarounds including the Shut down context menu to help with this.

Add Shut down Context Menu in Windows 10 Customization Tutorials

1 more replies
Relevance 41%

XP Pro Word 2000 (9.0.6926 SP 3)

Just this morning, I opened several Word files (.doc) and instead of the text that I had saved, I got this:
:X:'N%Z {B

e/:k&3``2

#&ө6?e!ZZ

o&1&Y|3`'[email protected]removeddata-cfhash='f9e31' type="text/javascript">/* */removed

Ov(*MA2nSCohYBXt



v?Lp

uv?!`fxS

%

N

u[p({xUglJ-

Preferred Customer

Normal.dot

Preferred Customer

Microsoft Word 9.0



Who out there can tell me why this is happening? It might be important that the only out of the ordinary thing I've been doing with Word lately is trying to solve a file conversion from ,wdb to ,doc. (I have other posts on this board dealing with that.) ...but it is possible that I've unknowingly TAMPERED with some part of Word that is responsib... Read more

More replies
Relevance 40.59%

Is there any way to see what tabs have recently been closed - without searching thru history. I am used to Firefox in Windows 7, which handled this matter directly.

Answer:In Microsoft Edge, how do I find and reopen recently closed tabs?

Ctrl shift T should reopen closed tabs, just like firefox

more replies
Relevance 40.59%

Hi,
I have many charts embedded into a worksheet, linking to cells on another worksheet, in the same workbook. The are pointing to the correct data source, the option setting is set to automatic updates, and using the F9 function key, does not work. It will update when I save close, and reopen the document. This is on a buissiness network, and should not have virus.
Any help greatly appreciated, this is driving me crazy
Thanks
 

Answer:Excel 2003 Chart not updating till I save and reopen

9 more replies
Relevance 40.18%

Hi, I have my database set up with tabbed documents and I want to keep that as I like to be able to move between the forms easily. However, I want to prevent users from using the right click Close or Close All on the tabs as I want them to use a button I've put on the forms that has code behind it (I've disabled the right hand corner x to close) but my users are still managing to close forms without using my command button and this is the only other solution I can think of. I don't want to remove the tabs altogether as I like them for navigation, and I don't want to have overlapping windows as the forms are built to make full use of the screen. I suppose I could put a custom ribbon up and use that for navigation but I don't know how to do that! Thank you so much in advance.
 

More replies
Relevance 40.18%

norton is also constantly auto protecting threats, doing on now so don't have name
 

Answer:Very slow, fake google and .dll that reopen, norton show threat constantly

I hope I did ok, not used to forums and watching threads. i did see that norton blocking last time was trojan.powelik. I also did some suggestions from hello post.
If I need to run those .txt again, let me know. Won't do anything else now till I hear.

Thanks,

Erin
 

9 more replies
Relevance 40.18%

Windows 10 has a cache issue when saving/reopening files which I can repeat and would appreciate some advice/ideas

Note: I have come here after weeks of problems and series of tests. I have ruled out antivirus, drivers, hardware and a host of other issues raised my Microsoft and can repeat this problem with out fail.

I have had two identical computers (A and B) built for me by a reputable store. Both run Windows 10 with a genuine COA on each system. I use one system at home and one at work. I have a portable drive that contains my data that is shared/used by both systems. I have bought seven drives to date out of shear frustration thinking it was hardware - 2Tb, 3Tb, and 4Tb from Seagate, Toshiba and WD - they all do this:

Note: file type *.xyz is just an example and not a real file type and only to assist this discussion (I have tried many file types as well)

Computer A > Save a file at 4PM onto a portable drive (for example abc.xyz) - time stamp 4PMComputer B > at 6PM commence working on the file and save at 10PM (abc.xyz) - time stamp 10PMComputer A > at 8AM (next day) go to the portable drive to discover the file (abc.xyz) is time stamped back at 4PM?
Now if I try to the run the file Windows starts giving errors about the file being corrupt or inaccessible.



Computer B > if you take the portable drive back to Computer A the file is time stamped 10PM and opens and saves as per normal i.e. Computer A will no longer run the file, yet Computer B does from... Read more

More replies
Relevance 40.18%

I did a Windows 7 Repair Install on my HP (G62) laptop, 64 BIT, and installed an HP Deskjet F4180 printer, it went on virtual USB001. Recently, when printing from various PDF files, I cannot print multiple pages of a document. It prints a single random page of the document, then gives printer error, and moves the document into queue, where I have to cancel the job. It seems to work OK in other application documents however. And it even seemed to work for an older small PDF file.

Im running the laptop on wireless, with router configured to automatic DHCP, shows 2 devices, the laptop and the wired Desktop, and seems to be running fine. The network is set to Public.

I uninstalled all HP programs, drivers, and reinstalled the latest full printer driver & software for 64 BIT from HP website.

I stopped & restarted the print spooler service.

I tried different USB ports, cables, connection steps.

I tried HP scan utilities for fixing, and tried Windows Troubleshoot (which temporarily fixes issue for a single print job)

Thru printers & devices all printer & USB drivers show up, are updated, & working.

In Printer Properties, I tried printing directly to printer setting, but then NOTHING prints at all.

As far as I remember the printer worked properly on my desktop, Windows 7, 32 BIT version.

I also reinstalled ADOBE PDF, in case its the applications fault

SFC /scannow doesnt find a problem

Ive done CCleaner, DiskCleanup, CheckDisk, also no Virus, Malware d... Read more

Answer:HP Deskjet F4180 Printer Error Event 602 spooler fails to reopen

Ahha, didnt think anyone could try to resolve this one....
Anyway, oddly the problem is not occurring right now, at least I dont think so, I still get the print spooler event but can print docs

any idea whats going on, I dont expect this to last...!

1 more replies
Relevance 39.77%

I have my TCP-VIEW App open from Sysinternals, and im seeing a lot of hanging [Close Wait] ports that just stay at [Close Wait].. and never clear up..

Is there anyway to make these [Close Wait] ports close-clear up immediately after they have been used.. so they don't hang saying [Close Wait] ..??

OS:
XP PRO SP2
 

Answer:How do I Make [Close Wait] ports close immediately?

anybody have any ideas..??
 

7 more replies
Relevance 39.77%

not sure if it's possible in Task Scheduler but i really want it to work. Basically I know how to automatically start program in Task Scheduler and how to also force close it. If we want to force close it we just create a .bat file with text like
Code:
TASKKILL /F /IM "nameofprogram.exe"
and schedule to run such file in specific time (for example 2.00.05 PM)

but this doesnt solve my issue because I need to automatically close my program without actually force close it. The above solution only force close the program and it's not what I want. I want to "properly" shut down the app, something like we click "X" in the program manually. Is that possible?

The problem is because I trade in MT4 automatically. if I use the above solution to close it on schedule, when it reopen, any change made to the object list in the MT4 would be deleted as if nothing ever added there. That's why I need a solution to automatically close my MT4 on schedule but not force close it. Any idea guys?

Answer:How To Close (But Not Force Close) Program Automatically On A Schedule

hi guys, after try to find more solution on Google apparently there's a very easy fix!

I should have not used the "/F". it force close the program!

should just go directly TASKILL /IM "nameofprogram.exe"

LOL

1 more replies
Relevance 39.77%

Excel 2010 SUM Formula updates, save file and reopen - values revert to old yet SUM totals are new

Hi guys
We have a very strange problem, our user opened his .xls document (97-2003 format) yesterday and updated several values, copied formula and updated (eg monthly/weekly totals). The worksheet includes many small SUM's spanning a couple of cells with sub-totals. He then saved his work and shut down as usual.
When opening the .xls document this morning, to continue his work, he noticed some of the values had changed (we assume to the previous ones) yet the totals where still the updated 'saved' values. Changing any values causes Excel to recalculate the totals (which then become correct, yet old totals)
Yesterday I updated the computer from a Windows XP (SP3), Office XP (SP3) to a Windows 7 (32bit, SP1), Office 2010 (SP1).
We've advised him to change document types to the new .xlsx format and to doublecheck everything.

Any ideas to the actual cause? Thanks
 

Answer:Excel 2010 SUM Formula updates, save file and reopen - values revert to old

6 more replies
Relevance 39.36%

Hi guys,  I met a problem recently: when I close the lid, the system does not go into sleep or hibernate. I have to open the lid again to make it sleep. The more ridiculous thing is after I have done all that to make sure it slept, I close the lid, it is awaken!!!.... It is not the problem of power management, which I have already configured as "sleep when close the lid". I am now guessing if it is the problem of the closing lid sensor... Anyone met this problem before? Best

Answer:W520 does not sleep when I close the lid, sometimes it wake up when I close the lid

Same problem here, since the BIOS Update, but it won't sleeep even after 5 times to close it.Linux instead suspends when the lid is closed, but isn't able to wake up afterwards, even with the power button.I think this is a general problem of new BIOS version 1.34

5 more replies
Relevance 39.36%

I'm using VBA to capture the close event in Outlook, however it will not close. I follow the code all the way through and it jumps back over to the close event again. It sometimes close after a few cycles or thousands of cycles.

Anyone know what's happening?

-Tim.
 

More replies
Relevance 39.36%

Hi All!

When I close out Internet Explorer and i return to my desktop I get a program called "Purity Scan" saying that it is closing and then states that it can't close. I don't know what "purity scan" is but I then have to manual say "end now"

Any recommendations to fix this problem? I have Windows XP loaded on the desktop.

THanks

Nancy
 

Answer:prgoram won't close when I close Internet Explorer

See if its in your Add / Remove Programs. If so use this feature to get rid of it.

Here are posts regarding same on another forum -

http://www.computing.net/security/wwwboard/forum/3049.html

http://www.computing.net/security/wwwboard/forum/5972.html

Not sure but Spybot Search & Destroy may help to completely delete all traces of this Purity Scan. Get Spybot from here :

http://www.spywareinfo.com

Once you have it - Run - click Online - Check for Updates - once you have them - close IE and in Spybot click Check for Problems and have it Fix all checked.

If it still persists please post back here.
 

1 more replies
Relevance 37.72%

I have windows xp using a cable hookup to the internet... when I connect and open up a seond window I am fine but when I go to close it, it will close but a error box comes up and says that Internet explorer has encountered a problem and needs to close.... under the technical info this appears in a box.... C:\docume~1\temp\f811_appompat.txt.....
I have done this several times and part that reads "f811" may change but this box otherwise shows the same.... And if I only open first window and close it the same error box comes up.... I just installed a new printer (hpdeskjet d1520) and took off a similar printer (hp3940) and had trouble removing the first printer's programs off my computer. This problem popped up after I done this... Which direction should I go to solve this problem,thanks....
 

More replies
Relevance 37.72%

I am running Win8.1 and IE 11. When I have multiple tabs open and click the X in the upper right hand corner I get an option that asks me if I want to CLOSE ALL TABS - CLOSE CURRENT TAB. I always want to close just one tab. How can I suppress the display of the Close All Tabs - Close Current Tab question and still be able to close just one tab? Doing research I found a lot questions addressing similar issues, but none that supplies an answer to my problem.
PapaK

Answer:IE 11 - Close All Tabs - Close Current Tab

Hello PapaK,

The X in the upper right corned of IE11 is to close IE11 itself. If you have more than one tab open, it will ask if you want to close all tabs or not by default. If not, then IE11 will not close. If you turn off this warning, then IE11 will close along with all tabs without getting "Do you want to close all tabs or the current tab?".

Internet Explorer - "Always close all tabs" Warning - Turn On or Off - Windows 7 Help Forums

If you just wanted to close one tab, then you can click on the X in the upper right corner of the specific tab you want to close. You'll only see the X on the tab if it's open, or if you hover the pointer over the tab.

Hope this helps,
Shawn

5 more replies
Relevance 37.72%

Logfile of HijackThis v1.99.1
Scan saved at 18:07:47, on 31/05/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\ewido anti-malware\ewidoctrl.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\Dell\Media Experience\PCMService.exe
C:\Program Files\Intel\Modem Event Monitor\IntelMEM.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Lexmark 5200 series\lxbtbmgr.exe
C:\WINDOWS\system32\bcmwltry.exe
C:\Program Files\Lexmark 5200 series\lxbtbmon.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\defender24.exe
C:\Program Files\ipwins\ipwins.exe
C:\Program Files\Panicware\Pop-Up Stopper Free Edition\PSFree.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\Messenger\msmsg... Read more

Answer:Hi,i keep gettting pop-ups some that close when u close them, others that just stay.

Quote:




C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\ewido anti-malware\ewidoctrl.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\Dell\Media Experience\PCMService.exe
C:\Program Files\Intel\Modem Event Monitor\IntelMEM.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Lexmark 5200 series\lxbtbmgr.exe
C:\WINDOWS\system32\bcmwltry.exe
C:\Program Files\Lexmark 5200 series\lxbtbmon.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\defender24.exe
C:\Program Files\ipwins\ipwins.exe
C:\Program Files\Panicware\Pop-Up Stopper Free Edition\PSFree.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Sony Ericsson\Mobile2\Application Launcher\Application

Launcher.exe
C:\PROGRA~1\PPPATC~1\... Read more

12 more replies
Relevance 37.31%

I have two networks that are connected to the internet, and i want to bridge them over VPN and i need to find which would be the best VPN Firewall Router to use.

My needs basicly are to have those 2 site conected togeter, plus the ability to connect outside of one of these sites, (user-2-site).

What would anyone here recomend?
 

Answer:Networking: VPN site-2-site and user-2-site

3com Secure Router

PERFECT for what you want to do! I use them at each of our branch locations and have the 3com VPN router here at corporate (allows 10 IPSEC VPN tunnels), the secure routers allow 2 of each connection. Basically, you would use a secure router at each place using IPSEC VPN tunnels to each, then, you can dialin to EITHER one using either a PPTP, L2TP or an IPSEC dialup connection (dials to the ip address of the router). Also has content filtering, firewall, etc... it's VERY nice for the price, you can find the secure routers for 149 or cheaper.





BenIT said:



I have two networks that are connected to the internet, and i want to bridge them over VPN and i need to find which would be the best VPN Firewall Router to use.

My needs basicly are to have those 2 site conected togeter, plus the ability to connect outside of one of these sites, (user-2-site).

What would anyone here recomend?Click to expand...


 

4 more replies
Relevance 36.9%

Hello People,
I am using IE8 for some time now.Recently I installed IE8-XP over IE8-RC1.Then the trouble started. Whenever I start the browser and try to open the "Reopen the last browsing sessions" feature IE8 hangs and I have to always use Task Manager to end the process .But I have observed that in the Processes tab of Task Manager the IE process still runs even after closing the browser.This means a IE8 process may be running in the background and this may be causing the problem.I tried to kill this IE8 process in through Task Manager but it is not closing.So please help me to solve this problem,As I have to reopen all the tabs one by one every time.I surf a lot for my project and "Reopen the last browsing sessions" feature is very helpful.Thank You. - Helmi.
 

More replies
Relevance 36.9%

My account with bing rewards was closed recently and yes i did not adhere to the rules. Is there any way to reopen it

Answer:Is there a way to reopen the bing rewards account after its being closed by the bing team?

Probably not, but you'd need to ask Microsoft. Windows Central is a fan site, with no affiliation to Microsoft.
Sent from my Moto X using Tapatalk

3 more replies
Relevance 36.49%

I recently upgraded to Windows 10 and experiencing a huge inconvenience. The reopen last browsing session does not work. I locked the computer last night via Windows key + L. This morning when I wanted to resume my work, I found the computer had installed updates and rebooted. I opened Internet Explorer but reopen last browsing session was grayed out so not an option. I had 8 tabs open but now I have nothing. I never had such a problem with XP, Vista, or Windows 7. Any suggestions to solve this would be appreciated.

Toshiba laptop Satellite C655

Answer:"reopen last browsing session" not working

Hello Doug, and welcome to Ten Forums.

Sometimes when the computer restarts like that, the last browsing session is not remembered. Usually this works best when you close IE instead.

In addition, you may see a "Restore session" message at the bottom of IE when IE was unexpectedly closed from a restart or IE crash.

3 more replies
Relevance 36.49%

Hi,
I was recently being helped by a member named "TheBruce1" regarding some infections on my pc. The thread was closed as all seemed well however, I am having new problems with my PC including popups that state " There was an error openong this document, the path file does not exist", and " Failed to get printer driver name" when I try to print. Also, my pc won't download pics from my camera anymore even though I removed and re-installed the software. The camera works on my desktop so I know the camera is not the problem. My question is, "do I start a new thread, as here, or is there a way to reopen the old one. Thanks, Bertronix

Answer:Remove "Securepccleaner" Thread Reopen

hello ,

well this is a new issueso this thread will do

now what i need to do is go to your (device manager)

now once there you will want to select from the toolbar of the window(veiw) then a drop down menu / from it you will select (show all hidden devices)

now if you see any (red or yellow) quotation marks , make a note of what they

now go to the (event veiwer) this is thru the (administrator tools) in the control panel
here you will find 3 to 4 subcatagories

you will want to check each of them for this is where windows keeps track of all errors
now you will want to make notes of the errors that have been recorded ( you do not have to make notes of double entries just of the dates of their happenings & how many there is)

do you have a Windows Xp cd, not the restore cd's that come with some systems, the cd will have the Windows logo & 3D hollowgram/image on it

if you do not maybe you can barrow one from a friend/family member/co-worker as long as it is the same version that is on your system

if you have (Windows XP Home Ed. sp2 ) then the cd will have to be that / if you have a cd with (Windows XP Home Ed. )you will have to sliptream (SP2 ) onto a disk that you create

this also applies to (Windows XP Professsional )

http://www.helpwithwindows.com/Windo...p2-bootcd.html

now if you do have the Windows XP cd with sp2 please follow these steps

--------------------------------------------

performing a (sfc) system fi... Read more

6 more replies
Relevance 36.49%

I recently upgraded to Windows 10 and experiencing a huge inconvenience. The reopen last browsing session does not work. I locked the computer last night via Windows key + L. This morning when I wanted to resume my work, I found the computer had installed updates and rebooted. I opened Internet Explorer but reopen last browsing session was grayed out so not an option. I had 8 tabs open but now I have nothing. I never had such a problem with XP, Vista, or Windows 7. Any suggestions to solve this would be appreciated.

Toshiba laptop Satellite C655

Answer:"reopen last browsing session" not working

Hello Doug, and welcome to Ten Forums.

Sometimes when the computer restarts like that, the last browsing session is not remembered. Usually this works best when you close IE instead.

In addition, you may see a "Restore session" message at the bottom of IE when IE was unexpectedly closed from a restart or IE crash.

1 more replies
Relevance 35.67%

I have setup a Site-to-Site VPN using Sophos UTM at each end. I set up an Ubuntu VM as a WINS Server using Samba.

So far so good. VPN Works.

My problem is with the WINS Server. I have taken two Windows 10 computers and for both of them added the IP of the WINS server under Advanced TCP/IP Settings and changed NetBIOS to Enable NetBIOS over TCP/IP.

The results are close but not quite right. The two computers with the modified settings can now ping each other using computer name rather than IP. Other computers on each end of the VPN can not do that.

That said neither computer shows up in the Networks of the other. This is what I am trying to fix.

It appears that name resolution is working for the computers that check in with the WINS server but that the Windows 10 browsing service is not adding those computers to the network.

The LANs are 192.168.2.0/24 and 10.1.1.0/24 the WINS server is on 192.168.2.0/24 and it comes back as __MSBROWSE__ for that network. For 10.1.1.0/24 the computer that connects to the WINS server is showing __MSBROWSE__ when I check with nbtstat.

When I check services Computer Browser is running.

Can someone help me or at least point me in the right direction? This really shouldn't be this hard so I feel like I'm missing something obvious.

More replies
Relevance 35.67%

I have setup a Site-to-Site VPN using Sophos UTM at each end. I set up an Ubuntu VM as a WINS Server using Samba.

So far so good. VPN Works.

My problem is with the WINS Server. I have taken two Windows 10 computers and for both of them added the IP of the WINS server under Advanced TCP/IP Settings and changed NetBIOS to Enable NetBIOS over TCP/IP.

The results are close but not quite right. The two computers with the modified settings can now ping each other using computer name rather than IP. Other computers on each end of the VPN can not do that.

That said neither computer shows up in the Networks of the other. This is what I am trying to fix.

It appears that name resolution is working for the computers that check in with the WINS server but that the Windows 10 browsing service is not adding those computers to the network.

The LANs are 192.168.2.0/24 and 10.1.1.0/24 the WINS server is on 192.168.2.0/24 and it comes back as __MSBROWSE__ for that network. For 10.1.1.0/24 the computer that connects to the WINS server is showing __MSBROWSE__ when I check with nbtstat.

When I check services Computer Browser is running.

Can someone help me or at least point me in the right direction? This really shouldn't be this hard so I feel like I'm missing something obvious.

Answer:SAMBA WINS Server + IPsec SIte to Site VPN = Browsing Service Not Work

VPN will only work for outside the network, not meant for connections inside the network.

7 more replies
Relevance 35.67%

Hello, I am trying to change the font size of a page on my site. I connect to the site with file zilla using the following steps:1.) I open file zilla.2.) then i type the host name (blablabla.com) the username (*********) and the password (********) and the port (****) then i click quick connect.3.) this now connects and it does let me see all the files. i get access and ability to change on the right side (the site side).my two main questions now are :1.) How do i make it show when i access the site because it is not (even if i delete the whole site name folder the site is still there)2.) Do i have to set up the FILE> "SITE MANAGER" with the user information too..... even though i can see and change the files on the right side (the site side) and it even though it connects. (Is setting up the "site manager" required in order to finalize changes or something.please help   , thanks

Answer:file zilla ...site wont change...files do...site doesnt

Hi, I use FileZilla too but i'm not sure what you are talking about...Any time you change or upload files to your server the files will automatically be time and date stamped. But I think you are talking about something else...?Could you try and re-describe your question please?It would be a good idea to add your server and connection details to the 'Site Manager' as this will save you some time if you frequently update your website.

6 more replies
Relevance 35.67%

I'm about to ship my thinkpad p50 from the Philippines to the US using a forwarder. My p50's touchpad and track pad stopped working. The keyboard is still working but the trackpoint, the trackpad, and the mouse buttons are not working. I tried everything but nothing works, planning to disassemble it acually but I'm scared that it might void my warranty.I want to use its US exclusive NBD on site warranty, but I'm not sure if lenovo will allow on site repairs at the storage or receiving areas of USPS, DHL, or any forwarder.Do any forwarder even allows such kind of service...... like keeping the laptop and having on site repairs at their offices/storage areas?Please help Thanks!

Answer:do lenovo allow on site repairs at forwarder's/courtier's site (eg. USPS, FedEx, DHL)

I have never heard of any courier that had that sort of facility

3 more replies
Relevance 35.67%

Dear Friend,
I am Anil from India. I have recently joined the forum after struggling for a week to stablise my unstable PC. I used to have some Anti Virus software on my pc before few years. But since last few years I was not having any AV software as this PC was not being used for surfing etc.
Since I started to use it again for surfing, downloading etc., I wanted to instal avast AV software. I installed it from some recent installer file with me. But when it tried to update the virus database, I got the message that "can't connect to server". Then I tried to open avast.com. But I again got the error message "The page cannot be displayed". Then I uninstalled the avast and tried to open other antivirus sites like norton, mcafee, avg etc., but all failed.
Then I tried to update my system using automatoc update utility. But again failed. microsoft.com also failed to open.
I use GPRS connection through cellular connection to browse the network.
Now I have downloaded and installed Hijack This.
Log file generated by it as follows:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:06:31 AM, on 4/28/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svch... Read more

Answer:Not able to open anti0virus site, microsoft site, window update, any other website beginning with https://

Please make sure you disable ALL of your Antivirus/Antispyware/Firewall before running ComboFix.. Please visit HERE if you don't know how.. Please re-enable them back after performing all steps given..Please download ComboFix by sUBs from one of the locations below, and save it to your Desktop.Link 1Link 2Link 3Double click combofix.exe and follow the prompts. Please, never rename Combofix unless instructed.If ComboFix asked you to install Recovery Console, please do so.. It will be your best interest..When finished, it shall produce a log for you. Post that log and a fresh HijackThis log in your next reply..Note: DON'T do anything with your computer while ComboFix is running.. Let ComboFix finishes its job..

2 more replies