Computer Support Forum

I Cannot Bring Up A Page

Question: I Cannot Bring Up A Page

This is really bugging me. There is ONE webpage that i cannot bring up on my browser, IE 6.0.2.


I have asked a few people already to go to that site, and everyone can see it. Why can't I? I even turned off my Norton Firewall, and I tried rebooting and clearing the cache. Can everyone here see that site? Ok, what else could be my problem?

More replies
Relevance 100%
Preferred Solution: I Cannot Bring Up A Page

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevance 56.99%

A laptop running XP and uses dial up, shows that it is connected but will not bring up a web page. The initial home page does not come up, and when we type in the web addy, it doesn't come up as well.

Any idea what could be the problem? Could it be something to do with the DNS? Just guessing here.


Answer:Can't bring up web page?

Does it give a 404 error?

2 more replies
Relevance 56.99%

I have an older computer that I use. I cleaned out alot of viruses from the computer but I am having problems bringing up web pages now. I cannot get any web pages up. I have rebuilt my network and also updated internet explorer. I have gone to dos and can ping websites using their IP address but cannot find host when I use their domain name. I have a valid IP address. I have also reset all of the internet settings to default. This one has got me frustrated. It says on IE that cannot find page or dns error. I may also get an error message that it cannot open the search engine to find the address. It seems to me like a DNS problem but I cannot figure out how to approach this one anymore. Any help would be much appreciated.

Answer:cannot bring up a web page.

I found the answer going thru the web at this website
doing what they said did not exactly fix the problem but, at the end I looked thru those reg files were reinstalled I found that the settings were not correct. I compared those reg files to anouther computer I have also running windows 98 and found some big differences. Adjusted the settings to be the same and it logged right into web just perfect. Thanks to all the people that did look anyways.

1 more replies
Relevance 55.76%

Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Basic , Service Pack 2, 32 bit
Processor: Intel(R) Celeron(R) M CPU 530 @ 1.73GHz, x64 Family 6 Model 22 Stepping 1
Processor Count: 1
RAM: 1013 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 106822 MB, Free - 71444 MB; D: Total - 7648 MB, Free - 2349 MB;
Motherboard: Hewlett-Packard , 30C6, 78.11, CND746109Z
Antivirus: Norton Internet Security, Updated: No, On-Demand Scanner: Disabled
I updated firefox hoping to fix this problem but no go. I can get on internet explorer without a problem, but firefox gives me the following error: Unable to connect
Firefox can't establish a connection to the server at

The site could be temporarily unavailable or too busy. Try again in a few
If you are unable to load any pages, check your computer's network
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I have added firefox to my firewall and internet otions in vista. Help I hate internet explorer, I really miss firefox

Answer:firefox will only bring up first page then i get an error

IE is working OK but you cannot access anything with Firefox?

Most likely that's a firewall or proxy issue. If you use a proxy is that set properly in Firefox? If you do not use a proxy is that properly not set in Firefox?

Have you tried Start - All Programs - Mozilla Firefox - Mozilla Firefox (Safe Mode)?

1 more replies
Relevance 55.76%

On XP Pro SP2, I've never had a problem getting to Windows Update. But recently, it brings up the graphics page "use the Start Menu for Windows update" and will display nothing else. It has a "vista" component in the last node of the URL it brings up. This machine has never had Vista on it. How do I get to Windows Update again? Thanks.

Answer:Windows update will not bring up page

This can be caused by virus problems. Have you done any anti-virus scans?

7 more replies
Relevance 55.35%

My windows desktop appears but no start button, task bar or icons appear with it.I tried ctrl+alt+delete and the screen goes black and in a few minutes the windows desktop appear again.I also tried to start in safe mode but no bios page for f8Help please?!

More replies
Relevance 54.53%


Have got a Satellite L300 laptop. Having issues with opening website pages. I am using Vista.
When I try to open pages with internet explorer pages does not bring up full content the screen is full with info but the content is not.
So say they is 20 items on a web page it only brings up 10.tryed my ISP and they told me to reset explorer but did not fix issue they siad it is some thing to do with computer.

Can any one hlp with this?
It would be great if you could.

BIG thanks in advance.

Answer:Re: Internet browser does not bring full content of the page

To be honest I don't understand what is wrong there.
Can you send us screenshot?
Is maybe IE zoomed?

5 more replies
Relevance 54.12%

This is what is brought up on my page instead of facebook or youtube. All other computers do not have this issue on the network so it is just this computer. This is only on Chrome not IE.

I have tried the following to fix it:
Full virus scan with Microsoft Security Essentials.
Malwarebytes full scan.

both came up clean

Checked hosts file to see if there was a redirect, nothing, everything was normal.

It's gotta just be a Chrome issue but disabling the two addons I have 0 Adblock and Google Docs didn't do anything different.

Restarted computer also...nada...

Also disabled Internet Information Services by going to programs and features in control panel then turn Windows features on or off.

I tried reading the possible issues from a search and doing those fixes and nothing has worked.

How do I get rid of this 'redirect' issue?

Answer:facebook and youtube bring up wrong page / redirect to IIS7

What happens if you attempt to access a website via IP instead of DNS?

5 more replies
Relevance 53.71%

Ever see this? You search google, click on a result, and then either backspace or click the back button, but instead of going back to google, you stay on the current site. Why does that happen, and is there anything to do about it?

Using IE 8 32-bit in W7 64-bit here, but have been seeing this problem for a long time with previous versions.
Any ideas?


Answer:With some sites, clicking back button doesn't bring you to prev. page

I thought I was going crazy with that too. Check for malware, spyware and adware....could be the culprit.

4 more replies
Relevance 40.18%

While Thinkpads have a handy program in Windows to remap the keys, there is no such program available for Linux that I know of. My problem is that my T410 has the Page Forward and Page Back keys right next to the Page Up key. I am constantly pressing these keys by mistake when I want to press the Page Up key. If I am typing an email message in a web browser, I suddenly loose all my text when the web browser goes one page back or forward.  The solution is to remap these keys to be normal Page Down and Page Up keys. I spent all afternoon searching for a solution, so I thought I would share to save others the same pain. Edit your .bashrc file (/home/youruser/.bashrc) and add these two lines:  xmodmap -e 'keycode 167=Next'  xmodmap -e 'keycode 166=Prior'The next time you start a new session, the keys should be remapped.

More replies
Relevance 36.08%

I bought a glow-in-the-dark keyboard a few weeks ago. The paper they referred to as an owner's manual said to delete the previous keyboard drivers to avoid conflict. I was wary of doing that, and I also did not know how to do it. I was expecting a simple plug n play, but of course nothing is simple with this stuff. When I first tried to use the new board, Windows would freeze up, but I kept at it till I found a way to make it work. I've been leaving the little cd that came with the new keyboard in the drive. When I power on it says 'no keyboard' found. Then I reload the drivers for the new keyboard, the computer reboots itself, and it's been working for quite a while that way. I know it isn't the proper way, but it's been working so I've put up with having to reload the new drivers every day. Today Windows started freezing up again even after I reloaded the new drivers when it gets to the place where I select which user name to use. That's the way it was doing before I found a way around it. I think it must all have begun when there was some sort of fatal error in Windows this morning. I looked at the screen just as an error box faded away and XP started shutting itself down. I didn't see the error message. So I'm writing to ask how do I remove the drivers for this old keyboard, and after that is done, and I reload the new drivers again, will the reloaded drivers be permanent? Thank you.

Answer:We bring it on ourselves

9 more replies
Relevance 36.08%

I have four computers on a network using a D-Link router and DSL. All four computers work well (3 win98 and one xp); but, I recently got another computer and substituted it in place of one of the working machines. With the newest addition (Win98) I am able to see all computers in Network Neighborhood and can access each. But, I am unable to bring up any webpages using ie. I get the usual message about page not found. Could anybody help. Thank you in advance.

Answer:Cannot Bring Up Web

7 more replies
Relevance 36.08%

how to bring c:\ in cmd

Answer:how to bring c:\ in cmd

Do you know basic DOS commands? Assuming CMD defaults to:C:\Documents and Settings\your username>Type cd C:\ & press ENTER.

3 more replies
Relevance 36.08%

I have never met a group of people collectively, who have as much knowledge as I have here.

Which leads me to ask, can we just all focus and together, come to a conclusion concerning a very nice security setup, that would be lite and very secure.

Lets pick one of each below (these are just examples, but you catch my drift right)...

A security suite or firewall and anti-virus (free or paid).

One malware on demand scanners (free or paid)

One whitelist (free or paid)


One anti-exe (free or paid).

Answer:Can We Just Bring This To An End.

Just pick my config

13 more replies
Relevance 35.67%

I can't get my pc to wake up whenever I hit the sleep button on my keyboard by accident. When it's sleeping and I hit a key, the fans will will turn on and I can hear some sounds coming from inside the pc but the screen is still black. After that nothing else happens so I have to reset my pc. Using WinXP Pro.

Answer:How do I bring my pc out of Sleep

6 more replies
Relevance 35.67%

I can connect and maintain a strong connection(56K phone line) but have a hard time bringing up a new page or pictures on a page. I ran AVG and there is one virus I can't get rid of. It is a "Trojan horse Downloader.Agent.3.AP" and is found in C:\Documents and Settings\Jacqui Rizzo\Application Data\hgv?e.exe. When I look for the file in the specified area, it is not there. I run AVG, Ad-Aware, Spybot S&D, Spyware blaster, and Spyware guard. According to my last HJT log, it was clean. Thanks.

Answer:Can't bring up new pages

Hi again odm......of course, that log was about six weeks ago and anything may have happened since then.

Please download HijackThis - this program will help us determine if there are any spyware/malware on your computer. Create a folder at C:\HJT and move HijackThis.exe there. Run a scan and save the log file. Get HijackThis Analyzer and save it to the same folder as the hijackthis.log file. Run HijackThis Analyzer and type in y if you agree. Open up the result.txt file created. Copy the whole result.txt log and post it in the forum. Do not fix anything in HijackThis since they may be harmless.

8 more replies
Relevance 35.67%

IE works in safe mode with networking but when in regular mode IE does not bring me to a webpage. Also, in regular mode, I am able to ping

Answer:IE cannot bring me to a webpage

Error messages?


4 more replies
Relevance 35.67%

"In an instant message chat, Microsoft has told the Windows Featured Communities that the demand for Windows Vista Beta 2 has been overwhelming. It is, in fact, the largest downloaded software in history. Currently, they are serving product keys out ten times faster then the downloads can be served. In fact, they are pumping out bits as fast as they can - any faster and there would be a measurable impact on the internet. In fact, I quote a Microsoft representive:

"So, we are literally saying that if we increased our bandwidth any further there's a possibilty of taking down the Internet - people might have problems with World Cup viewing, etc"

People who have recieved Vista Beta 2 product keys, but are unable to download, may need to wait a few days, up to one week. Microsoft encoruages users who want to try out Windows Vista Beta 2 to order the DVD. When they recieve the DVD in 1-4 weeks, install it, and activate it, they will be automattically guaranteed an RC1 upgrade."

this info was taken from

i was wondering hwo this would happen how couls so many people DL vista and MS expanding there bandwidth "bring down the internet"??

Answer:bring down the internet?

the only way i could see it is there basicaly being a traffic jam, i'm willing to bet they're sending one out to every single backbone carrier, ISP, everything, they're uploading to the net as fast as they can, and probably every router within so many hops has seen vista go thru so many times, its all hogging up bandwidth more than they've seen before. Basically all the routers and ISPs that are shoving this out is causing everyone else's traffic, mainly the vista downloaders and probably microsoft web site browsers are experiencing it the most, but since vista is taking up so much bandwidth its causing everyone else's internet to be slow. I actualy havent noticed much a difference, mines always slow, **PUKE FOR DIALUP**

8 more replies
Relevance 35.67%

hello everyone,I hope iam in the right Form...Can someone please tell me how to bring up 2 sites...& Minimize one....Example> I bring up yahoo & Minimize it...then try to bring up another site,it wont do it...the last site i try to get into brings up the Minimize used not to be like that...I could bring up 3 or 4 diferant sites.....any help would be Appriciated...

I am runing Windows Xp home Edt.

**Thanks bobbylee

Answer:Can't bring up 2 Sites

bobbylee said:

hello everyone,I hope iam in the right Form...Can someone please tell me how to bring up 2 sites...& Minimize one....Example> I bring up yahoo & Minimize it...then try to bring up another site,it wont do it...the last site i try to get into brings up the Minimize used not to be like that...I could bring up 3 or 4 diferant sites.....any help would be Appriciated...

I am runing Windows Xp home Edt.

**Thanks bobbyleeClick to expand...

You should be able to do it by just opening two windows in IE.

But, I would like to recommend getting firefox from, that program allows for tabbed browsing which will allow you to have multiple sites open in the same window.

3 more replies
Relevance 35.67%

On my other puter it goes to the site but will not open the site .We had a problem and just got it bk on line I have Hughes net.Help

Answer:Don't bring site in

Any site?
What browser?
Did you try different browser?

14 more replies
Relevance 35.67%

When I push alt tab it does nothing,also I can't seem to open up my task manager. did a spyware/malware scan last night and nothing. Help?

Answer:Can't alt tab or bring up taskmanager

What happens if while on the Windows desktop you press Ctrl+Shift+Esc?

6 more replies
Relevance 35.67%

I'm traveling to Peru, which I hear that there is a lot of theft. Of course, there's theft in many places including where I live. I have two cameras.. canon 350D, and the sd700 is. Taking a poll from camera lovers who have traveled a bit..would you bring both cameras?
I'm am bringing the sd700, but debating about the 350D even though I LOVE the pictures. Not sure I want to lug it around... just out of curiousity and fun which one would you bring, or both??...

Answer:Which cameras would you bring?

take the one that is easiest to use. leave the other home. no sense in carrying excess baggage. with airport security the way it is. the less you carry, the better off you will be. have a safe trip.

3 more replies
Relevance 35.67%
Question: Bring back pop up

The original issue for one of my users was she was getting a message on a certain webpage that said "To display this webpage correctly you need to download and install the following components: Java Virtual Machine"

The options on this box were to download or cancel. When you hit download, it would take you out to the java site in a different window and it would load the original screen one button at a time as you kept hitting download. Now I think I know how to fix this, but one of our level 1 techs decided to check the box that said 'Never download any of these components'. So now it appears this webpage doesn't want to downlod java components anymore.

Does anyone know how to get this pop up back after he checked that box? I feel like I've tried everything in the security settings and the advanced tab. She's got IE6SP1 on a 2000 machine.

Also to note: I actually reverted back to IE5.5 and the webpage worked fine, but when I upgraded to IE6SP1 again it gave us the same screen with red x's all over the place. Any ideas would be appreciated.

More replies
Relevance 35.67%

I love summoned war area can U bring it out on here I'm on using surface tab with windows 8.1 rt hope U can help

Answer:Will you bring out a game?

Be best to contact the Summoners War developer [email protected]

2 more replies
Relevance 35.67%

I have a Dell inspiron with Windows 8.1.

I can't bring up google. I get a message that reads,

Windows could not connect to the Group Policy Client service. This problem prevents standard users from sinning on.

As an administrative user, you can review the system event log for details about why the service didn't respond.

I'm on with Mozilla but all my passwords are saved on Google.

How l can I fix this?

Answer:Can't bring up Google.

First off you have posted in the Windows XP forum, but you are running Windows 8.1. I will have a nice Mod move you to that section of the forum.
Second, Mozilla Firefox is a Browser, When you say You can't bring up Google, do you mean Google Chrome the browser? Or do you mean Google the search engine web site?
Now Try This:

1 more replies
Relevance 35.67%

In documents I select new folder and don't get one. This happened to me before but I forgot how to cure it. Please assist.


Answer:won't bring up new folder

Quote: Originally Posted by amsanborn

In documents I select new folder and don't get one. This happened to me before but I forgot how to cure it. Please assist.


The new folder is being put into the "Default save location". You can find out which folder this is by clicking on the link above that says "# locations".

Or, back out of the Documents library and then right-click the Documents library itself and choose Properties.

9 more replies
Relevance 35.67%

Hi, Yes I know that this might be unorthodox but I am trying it anyway - why not? My hd was replaced, so instead of using the xp setup cd (actually I only have a hp recovery cd no ms xp setup cd)Anyway I have a saved image of my xp os with all the customized desktop and applications on it.I did a restore using Image for Dos after creating a partition and formating it with diskpart and format.Now it says when I boot "reboot and select proper boot device"I can get past this with the xp boot diskette I got from microsoft and the system boots fine.I know that since I did not do the setup with the new hd that there is no MBR to point to the boot partition.Microsoft has no hits when I search with the indications.Any hints? I know this can be done somehow.thanks for the help!

Answer:new hd - using an image to bring up

I did a fixmbr and it did the same thing.I did a fixboot and the same thing.One of ms messages said to check if the partition was active, it was not so I changed it and it works!thanks for the inspiration of this site!It sometimes is so helpful just to tell someone about a problem and get it off  your chest so to speak and then you see the light!

1 more replies
Relevance 35.67%

Can you help me?

Answer:What's new in Windows 8 bring?

MetroUI, No start menu, different task manager, matte colors, improved explorer, completely botched up user interface.

8 more replies
Relevance 35.67%

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: AMD Athlon(tm) II X2 245 Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 3838 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 464356 MB, Free - 430131 MB;
Motherboard: Dell Inc., 04GJJT, A00 , ..CN7016314M02S2.
Antivirus: Norton AntiVirus, Updated and Enabled

I can't bring up MyMSN which is my home page. Regular MSN comes up fine but for two days now, I can't access MyMsn. Does anyone know if they are having a problem or have I picked up something? I keep getting a "Refresh this page or try back later" message.

Thanks for any help anyone can give. Newbie Retiree and not sure what to do.

Answer:Can't bring up mymsn

6 more replies
Relevance 35.67%

As of late, my AD-AWARE and SPYBOT scans have been relatively clean. Then... this morning, for the first time in several weeks I fired up AIM and when I did a scan late tonite it found all kinds of stuff, Wupdater, Newnet among others.

Is AIM the likely culprit of these programs? I use OPERA as my browser and since making the switch to it have had hardly any spyware. AIM seems to open up IE for any of it's updates, games etc.... I was just curious about AIM contributing to this new spyware I found on my system.



Answer:Does AIM bring in the SPYWARE?

Hmm, think I read something about the New version of AIM carrying spyware... I'll try to find the thread.

1 more replies
Relevance 35.67%

I am trying to figure out how to bring two seperate networks together as one over the internet without usings a server box.

I have location 1 my office with a network and DSL modem.

I have network 2 my other office with a network and DSL modem.

I'm trying to seamlessly join them over the internet.

Can someone please explain to me how to do this.


Answer:how do I bring two networks together as one?

10 more replies
Relevance 35.67%

ok, I need some help removing some malware from a co-workers computer. I have been working on it all day, using mostly this site for info. Symptoms include:

Control Panel has disapearred, gives system warning that access cannot be granted, check with administrator.

Internet tries to connect to, which I know is a malware site.

System Resources are being used up dramatically.

Other usual symptoms with an infection like this.

I have run Hijakthis and Combofix. and I have attached the logs. Any help and advice is appreciated.

Answer:Bring the suggestions, I need them.

Welcome to Major Geeks!

Please uninstall HJT as it will be properly installed when you do the following:

Please follow the instructions in the below link and attach the requested logs when you finish these instructions.

READ & RUN ME FIRST. Malware Removal Guide

1 more replies
Relevance 35.67%

Thursday July 9, 2009

Hello again, MG's best people::-D

I am having trouble bringing my desktop PC out of 'Stand By'.
I rarely used this function, for several idiosyncratic reasons, but now I'd like to be able to do it. Unfortunately, the PC has other ideas about this decision.:confused

It seems like a hardware problem, so I stuck this post in here; but it may be an OS issue and belongs under 'Software'....

I go to Start > Turn Off Computer > and then hit the 'Stand By' button. The PC and monitor shut down like it is really turned off, except the little blue light behind the button (where you boot-up the machine) is 'on'. The machine does not purr or make much noise. That's what I thought it was supposed to do.....

Okay. So now, when I jiggle the mouse, or hit 'enter' or hit the space bar, I am waiting for the PC to come back on, which it seems to be trying to do. The machine starts to purr a little, but there is no great humming and the monitor stays black. I can't get it up and running, or even out of this state that I am now cornered in.:cry

The only way to go at this point is to press that button that normally boots up the rig, and has a little blue light on behind it, and hold it down until the machine manually shuts down. Then I gotta re-boot it back up again.

Is this something someone knows how to fix in a simple way ?? I'm no experienced officer, so the �... Read more

Answer:Can't Bring Her Out of 'Stand By'

Hello there, only advice I can give is to replug everything such as power cable, mouse cables other usb devices ect, oh and that pc powwer button light is that normally the colour of the light when pc is turned on or is it another colour?


3 more replies
Relevance 35.67%

I know that SLI and CrossFire have been around for a while, but is there any benefit to adding more than 2 cards ?There seem to be some new cards that will allow 'QuadFire', which - I guess - is 4 cards working in tandemclick hereAny thoughts on how much more grunt we will see by adding in the 3rd and 4th ?

Answer:What will QuadFire bring ?...

some games are faster with one card, plus sli drivers have took some getting right, so getting four cards working properly looks iffy.

3 more replies
Relevance 35.67%

Hi all. I have ThinkPad T520, and I wanted a USB 3.0 port. I found out that there is a dock station 4338-35 which has one. I was naive enough to believe that the docking station has its own USB 3.0 controller, so I've bought it. So yep, now I have lots of USB 2.0 ports, and no USB 3.0 port, because my laptop doesn't have USB 3.0 controller. Awful sad. How naive. Let me be a bit more naive and ask: is it possible to upgrade T520 somehow, and get USB 3.0 controller on it? Or, is USB controller built into the chipset so it's not possible? Thanks.

More replies
Relevance 35.67%

Ok fellas, here is my situation. I have a dvd/vhs player (dvd part is broken). I need to get a vhs onto my computer. I was thinking hooking up the dvd with the yellow and red rcas to my 7900gt video card (there is a adapter that hooks onto video card with yellow and red rca inputs). Now I tried hooking my tv up this way for the **** of it, and the computer screen projected onto the tv. now i need to do the opposite. I need the vhs from the player to project onto my monitor. Is there a program (perferably freeware) where I can then save/record the video onto my harddrive?

Answer:How to bring VHS onto Computer

You need VIVO (video in video out) for that.

You could purchase the Hauppauge PVR-150 (TV Tuner/Capture) to do it.

5 more replies
Relevance 35.67%

I have a broadband conncetion, I can access my email account, but can not bring up my browser. It comes bacck and says it wil dial my connection now. My operating system is XP home and my computer is Dell XPS Gen 3. This is a new development.

Answer:Can not bring browser

Check the Connections tab in Internet Options. Make sure that you don't have a dialup setting and the radio button:
Always dial my default connection is not ticked.

2 more replies
Relevance 35.67%

Hi there

This "update in place" mechanism is a PAIN if it fails during the process -- this means you actually have to restore the previous image of your OS (if you have one), remedy the error and start again.

Mine failed because I was nearly out of HDD space for the OS so it ran out of space. OK I restored the OS from an image, used GPARTED to increase the partition size and then OK started again. OK this time.

Now in the "REAL WORLD" there will be many people who could be rendered with an inoperative computer if the update in place fails and there isn't an automatic roll back or the roll back fails. Some people (probably MOST who aren't on these forums) STILL don't take regular reliable backups !!! - Idiotic I know but true. !!

Having an ISO would eliminate a lot of this - just wipe your HDD and install clean -- what's wrong with that idea.

(I know currently there are some get around's on this (Kari's tutorial for example) but the average user won't do that of course).cre

The update in place is a DOG on VM's too - probably worse than on a REAL machine - especially if you run out of HDD (Virtual) disk space for the OS. You need to backup the image of the VM, Create a NEW VM and then restore it !!. You can't just image the OS or copy the Virtual Disk files.


Answer:Ms PLEASE bring back ISO's again

Good idea to have the option of this to download it

The only problem is would this work ok for the average user, I cant see many wanting to download an ISO, clean install and then install/setup all their apps again

IMO, the in place upgrades/updates as they are now are best for the average user, for more technical the ISO could be offered

24 more replies
Relevance 35.67%

Currently living/working in our RV while we are looking for a new home. Most RV parks have WiFi which works for my purpose IF I am outside. Once I step into the RV it is like stepping into a Faraday cage, i.e., the signal strength drops to almost useless levels.

What I'd like to be able to do is grab the signal (maybe a Ubiquiti?), get the park's IP address. Feed that into a existing WRT54G (as if it was connected to the WAN) via CAT-5 cable which would then be my "inside" WiFi. I know I don't want a repeater because I will lose bandwidth. Looks like I want to do a bridge (client?) but am not sure what to get for the initial signal grab.

Thoughts, suggestions, comments, welcome.

Or am I completely nuts and just need to get a rainsuit and an umbrella and work outside?

Answer:Best way to bring Wifi into RV?

you could mount a wi - fi anteena out side or on top of the R V if You Know How ?? then run the cable to your pc / laptop

5 more replies
Relevance 35.67%


I downloaded IE9 and installed it. But its not good.

Why the tab bar is coming besides the address bar ? And why its not draggable to below the address bar ??

Am i missing something ?


Answer:How to bring tabs down in IE9

Hello and welcome to the forum.

There are two things you can do you click click Alt every time then the menu bar will appear.

Or if you want it there all the time:

5 more replies
Relevance 35.67%

After dial up and logging into my ISP all I get are URL not available. I have switched ISPs, switched from IE to Netscape, reloaded my modem drivers, played with buffers - switched off and changed settings. I have gone to DOS and used PING. This problem has been going on for about a week. A few days ago I got 80% lost using PING, now I get 100% lost.

My ISP is OK, since my laptop works fine. My desk unit which is having the problem is Intel 350 Pent II with 64 MG ram and Windows 98.

Answer:Can't bring up anything from Internet

16 more replies
Relevance 35.67%

im having the same problem with my computer
but im having trouble viewing

Answer:cannot bring up thread

that's because the thread has been removed

1 more replies
Relevance 35.67%

I can pull up any site I want to on the internet, except Adobe web sites.

Is there some Internet configuration, security issue or other Unique requirement from Adobe that I'm not using?

My system is Windows 98 and my connection is Dial-up. Earthlink.
Using a 56K Diamond Modem.


More replies
Relevance 35.67%

I am working on this computer and he has McAfee, ThreatFire, ParetoLogic and Speedy PC. We were having trouble with going to windows live, but your website helped with that, but I still can't load McAfee. It shows up running in the task mgr., but when I click on the icon it acts like it is going to come up, but doesn't. Down on the right side of the taskbar where the active programs are there is the McAfee symbol. When I right or left click nothing happens. He is running Vista Home Basic on his Acer. I downloaded Prevx and Malwarebytes had found malware and removed it. Paid some guy online $35.00 to help me fix problems, but he knew about as much as me and did a system restore and removed the above Prevx & Malwarebytes. I have tried disabiling the UAC and other stuff, but to no avail. I have spent 2 days on this and I am getting really frustrated. This computer is in Spanish which I can read some and the keyboard is also. I keep changing the language and it keeps changing back. I have a feeling that the McAfee has expired, but it still shoud come up. Oh yeah, the security center shows that there is no anti-virus software installed.One more thing...The ThreatFire has 2 screens that come is a map and the other is about security and I can't close the windows unless I reboot. Also, I am having a hard time being able to read the letter verification.Thanks for any help you all can give me!

Answer:Can't bring up McAfee

McAfee and ThreatFire are both anti-virus programs and shouldn't be installed and running at the same time.

Those other cleaner/booster/optimizer/tuneup programs are basically useless and will do little to nothing to improve speed or performance. What they can do is break programs and damage the operating system.


2 more replies
Relevance 35.67%

When I'm instructed to bring up a graphic by clicking on hypertext I get, instead, first a quick flash of an image that appears to be the requested picture. But it disappears so quickly that about all I get to see is a fleeting glimpse of the rectangular outline of it before it is gone and is immediately replaced by a round, red circle with a diagonal through the middle (no entry icon found on some street or road signs, etc., common in Europe) as it reverts back to the original scene where I started. I have checked my Security settings and can't find anything that appears to be out of line. I am using IE 6.0 and my OS is Win XP Pro.

P.S. Can someone tell me what he has under Internet Settings\Security\Restricted Sites, if anything? At the moment I have nothing. TIA.

Answer:Can't Bring Up Graphics

6 more replies
Relevance 35.67%

Here's the email:[email protected]
Let's prove there's demand! :D

Answer:Help bring SongKick to WP!

They never reply to my emails

7 more replies
Relevance 35.67%

Whenever I bring up Netmeeting in Windows 2000 Pro, I get this error:
conf.exe - Entry Point Not Found
The procedure entry point SMapLS_IP_EBP_20 could not be located in the dynamic link library Kernel32.dll

I dual boot with Windows 2000 Pro (SP2) and Windows 98 SE on the same partition. I get this error whenever I bring up Netmeeting in Windows 2000 Pro. I don’t get this error in Windows 98. Can anyone help?

Answer:Can Not Bring Up Netmeeting

I have a friend that cannot get it to work on her PC running Win2k Pro either. Not sure if it is a Win2k issue. I would try the latest version and any updates for it first. Look at this article from the MS Knowledge Base:

2 more replies
Relevance 35.67%

Here is my hijack this log. Thanks for your help:

Logfile of HijackThis v1.99.0
Scan saved at 10:59:51 PM, on 1/17/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Roxio\Easy CD Creator 6\DragToDisc\DrgToDsc.exe
C:\Program Files\Roxio\Easy CD Creator 6\AudioCentral\RxMon.exe
C:\Program Files\Roxio\Easy CD Creator 6\AudioCentral\Playlist.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\Program Files\BroadJump\Client Foundation\CFD.exe
C:\Program Files\\bin\tgcmd.exe
C:\Program Files\Webroot\Spy Sweeper\SpySweeper.e... Read more

Answer:Was told to bring this here.

12 more replies
Relevance 35.67%

I have a Dell inspiron with Windows 8.1.

I can't bring up google. I get a message that reads,

Windows could not connect to the Group Policy Client service. This problem prevents standard users from sinning on.

As an administrative user, you can review the system event log for details about why the service didn't respond.

I'm on with Mozilla but all my passwords are saved on Google.

How l can I fix this?

Answer:Can't bring up Google.

First off you have posted in the Windows XP forum, but you are running Windows 8.1. I will have a nice Mod move you to that section of the forum.
Second, Mozilla Firefox is a Browser, When you say You can't bring up Google, do you mean Google Chrome the browser? Or do you mean Google the search engine web site?
Now Try This:

1 more replies
Relevance 35.67%

Hola, amigos!
As I mentioned a few days ago, I'm getting a new graphic card.
After much compromise and rebate, I settled for a Powercolor PCS Radeon HD 5450 - and no regrets!

Actually came in 2 days earlier than the delivery due-date. Impressive.

Ah, the speed at which Fable's glorious!

Answer:Bring forth the Radeon! :D

The package contained:

1 Radeon HD 5450
1 Installation manual
1 driver CD
and if it counts, a bubble-bag.

8 more replies
Relevance 35.67%

Here is my list so far. I plan on playing Fallout New Vegas, Skyrim and Arma2 including some retro emulators such as Project64. I want this rig to be less then 600usd and was wondering if there was anything you guys thought would be better to change. I have an optical drive I can take from my current dell and I think we have Windows somewhere in a flash drive. Do I need windows 7 to play these games or just Steam? I dont need a monitor or keyboard or mouse. I have a Samsung 32in TV that I use as a monitor.

Cooling Fan:
Video Card:
Power Supply:

Right now it seems like this will come to over 600usd. I wanted a good processor and video card so that games wont lag and will be a good fps. I will likely play at the medium setting mostly, but may use high as well for games like skyrim. My dad knows computers moderately well and could help me with installing everything correctly.​

Answer:How can I bring the cost of this rig to under $600

I've just added everything to my shopping cart, including the Hyper 212 which was only $5 more at Newegg. It looks to be a total cost of $620 for everything listed. I did notice one thing, AMD recommends a 500W PSU with the HD 7850, the list has a 450W PSU chosen. Other than the 250GB drive, everything else looks good to me. I personally wouldn't spend $60 on a 250GB HDD. For $25 more you could have 4 times the capacity. I know you are looking to save a buck or two but sometimes shortcuts have too high a cost.

4 more replies
Relevance 35.67%

I have not recieved a reply to a posting. Is it possible to bring a posting back to the top of the list without re-starting a copy of the same subject.(post)

Answer:bring postings to the top

Yes it is. Go to your posting and type a response. This could be anything - "bump", "oi", "elp" etc.

2 more replies
Relevance 35.26%

I opened something that was accidently downlowded and i didnt install anything but opened the program. I closed it then i tried to delete it and it would not let me. Then suddenly norton came up prompting me to either to allow or block two programs which were mediaaccess.exe and toolbar.exe, i choose to block them. The i tried opening taskmanger to see if it was running and end its task to delete it but it wouldnt let me op task manger!

Can anyone help i could really use it.....

Answer:Can't Bring up Task Manger

Funny, a similar situation happened to me.

when you press control+alt+delete does nothing happen? and when you type taskmgr in start>> run does it give you a message like this program is already in use by another program?

Ok if you havent already download ad-aware or spybot search and destroy.

Scan with them in normal mode, then boot in safe mode by reboot and repeatedly tapping f8 then pressing safe mode.

Scan inside safe mode, with norton and ad-aware

Because you didnt allow it to acess the internet it couldnt download the rest of the virus to your computer so chances are it only placed variants in your startup and in your system restore. Ad-aware and norton should take care of those.

6 more replies
Relevance 35.26%

OK, this may seem like a random request...

I want to make it so that I get a message box pop up when I start up the computer. I'm currently working through learning the kanji (Japanese characters), and I want to get it to pop up a message saying what % through the book I am.

I have relatively few programming skills ... is there a way to do this easily? Or will it be a case of needing to code something in C, which is still beyond me on Windows. (I'm on Vista at the moment.) I need to be able to change what the message is easily enough when I work out I've gone up a %.
Is there an easy-ish way to do this?

Thanks very much.

Answer:Bring up a message on Startup

Since nobody has replied,, I bet it's almost impossible for people to come up with that given that the software you are using is uncommon. We don't even know what software here. Stuff like that, unless it's already built into your program, is usually done for very popular softwares and for functions that a lot of people wish to have or report that they do not work the way they should.

3 more replies
Relevance 35.26%

Live one gives me a message "This PC has problems that are affecting its security. Click "Fix" to fix them now. When I respond I get an open window that's blank
c:\Program Files\microsoft windows onecare Live\HTLM\GTAgent\html\index.htm is in the address box and that's all. Is there a problem with the site?

Answer:fix button won't bring up screen

Hi, tryingtobenice, and welcome to the forums.

If you look at the path, it is not a *site*, it is a page on your own hard drive.

c:\Program Files\microsoft windows onecare Live\HTLM\GTAgent\html\index.htm

By chance do you have UAC disabled?

1 more replies
Relevance 35.26%

Got a 5 year old Packer Bell - C: capacity: 17.7 GB ONLY USING 2.56 GB. --63.OMB RAM --WINDOWS Me - Genuine Intel - Intel(r) Celerom (tm) processor.  Just want to use it for Art program and online uses. Worrie dabout updating windows to xp cause it will use too much up?CD - Rom drive stop working after burning a CD. Its a sony and I found others had the same thing happen to them with the same one. Funny thing was it would still read music CD but nothing else. Then that stop. With all the programs we had on it was slow and used up. So we got a new computer and kept it around. Now I get the green light  from wiffy that I can put some money into it to beff it just alittle and at least replace the CD ROM. Most stores that sale them are for updated versions of windows etc.  Is there any companys that sale them that you can trust on line for older computer plat forms ?One more thing in the CD -ROM drive, box with info, Device type- CD ROM,, manufatuer - standard cd-rom-device.. next is hardware version - NOT AVAILABLE is listed. Line below say this device is working properly. Yeah right it is.  Just beeps once in while and never comes up to speed.  Any info would be a help. thanks

Answer:Bring it back to Life

Having XP run smooothly on your machine, basically depends on two things:- Processor speed- Amount of RAM memoryYou didn't post your processor speed so I can't tell you about that, but 63Mb is not enough for XP.Upgrade to at least 256Mb.About your CD Rom. You can buy any CD Rom with an IDE connector out there.If it says that it works with Vista, than for sure it'll work with ME.But make sure that the one you buy is an IDE drive and not a SATA drive!!

1 more replies
Relevance 35.26%

At the command prompt when I write:
MORE | SAMPLE.TXT ("SAMPLE.TXT"=this copied->pasted)
open automatically Notepad with the contents of the SAMPLE.TXT... well after that cursor at command line moved a line down from the start of line WITHOUT the prompt, (C:\Users\User\testOS\) ???

C:\Users\User\testOS\AC>MORE | SAMPLE.TXT

<cursor here>

Answer:WHAT TO DO to bring prompt back

What ?

2 more replies
Relevance 35.26%

In one column I want in cell A1 to enter a value that is in a cell from A2 to A1000 and then excel brings me to the cell in which the value is.

Answer:find value and bring me to the cell

Thanks for telling us what you want. If you need some help with that, feel free to ask.

2 more replies
Relevance 35.26%

Hi there, I try to bring the Z-Drive 512 GB  G2 to run in a Z-420 workstation. I know the problem with the NVME RAM. I tried to take the drivers from Samsung (2.1) in the Installation of windows 10. It ist possible to install ist, but than after reboot I see only a black screen with a death cursor. In the boot menu I see no Bootloader in the UEFI? I hope somebody can help me.  thx /Andy

Answer:How can I bring a Z-Drive G2 runing in a Z-420 ?

Alphavil wrote:Hi there, I try to bring the Z-Drive 512 GB  G2 to run in a Z-420 workstation. I know the problem with the NVME RAM. I tried to take the drivers from Samsung (2.1) in the Installation of windows 10. It ist possible to install ist, but than after reboot I see only a black screen with a death cursor. In the boot menu I see no Bootloader in the UEFI? I hope somebody can help me.  thx /AndyPlease try the following - after you install everything, be sure to remove the USB Windows installation pendrive from the system and go into bios and make sure that the three options roms settings in bios (pxe, mas storage and video) are set to EFI. See if this works and report back.

2 more replies
Relevance 35.26%


I'm using Windows 10.1703 Pro x64. I tried Paint3D to use, it looks good...
I was at friends notebook with 32-bit Windows 10 (correct version don't know) and opened Paint3D - he has there in top horizontal menu also Remix3D and is possible to add finished objects into own projects.
It is useful and I mean this makes it better useful program from toy.

How to bring Remix3D into Pain3D?

Thank you for each help.

Answer:How to bring Remix3D to Paint3D?

Hello Miro
Let's see who knows about this software.
@Evan Omo @Rustys @phillpower2 @gus @Malnutrition @jmarket @[email protected]@n @SpywareDr

6 more replies
Relevance 35.26%

If you google around for "fastest xp boot" or something like that, you'll find out that many people have achieved booting XP in 15-20 seconds. My laptop takes about 45-50 seconds. Does anyone know of a way to speed it up and bring it close to the 15 second mark? Thx.

20 GB Hard Drive 4200RPM
Sony Vaio PCG FX370
256 MB RAM
1 Ghz Pentium 3 256KB L2 Cache

Answer:Bring down XP Boot Time...?

15-20 seconds sounds like a pipedream to me . . However, the fewer items you have starting at Boot, the faster it will boot.

I am pleased with my 45 seconds

3 more replies
Relevance 35.26%

I have Avast anti virus installed and COMONDO firewall. The problem is that on the comondo firewall it is saying that 100% of the traffic is coming from ashwebsv.exe.

I believe this is what is slowing my pc down so much a lot things such as youtube videos just wont load. Thanks for any help, here is the HJT log

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:50:55, on 02/06/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18226)
Boot mode: Normal

Running processes:
C:\Program Files\Samsung\Samsung Magic Doctor\MagicDoctorKbdHk.exe
C:\Program Files\SAMSUNG\EasySpeedUpManager\EasySpeedUpManager.exe
C:\Program Files\Samsung\Easy Display Manager\dmhkcore.exe
C:\Program Files\Samsung\EBM\EasyBatteryMgr3.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\Alwil Software\Avast4\ashDisp.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Kontiki\KHost.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\Common Files\LightScribe\LightScribeControlPanel.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Users\Paul\AppData\Roaming\Octosha... Read more

More replies
Relevance 35.26%

after using both the beta and RC versions i have installed the w7 home premium 64 bit version on my dell precision m6300 laptop.i am still very pleased with it generally but rather disappointed to have lost the fish for my desktop it available on higher versions or shall i start a campaign to get it re-instated? i had grown rather fond of it...

Answer:bring back the fish!

Never mind is there anything here click here

9 more replies
Relevance 35.26%

Hi guys,  I have bought the converter to use the presentation on TV. My laptop is 3000 v100; it has a 15 pin vga.I conected the 15 pin vga with rca (yellow) as my picture: When I conected it to TV, nothing appeared on my TV. Is it possible to do like this? Or do I need to buy something else? Thank you in advance, Oatasis 

Answer:How can I bring the laptop display to TV?

Do you have switched your Display device by pressing FN+ Display Button?

1 more replies
Relevance 35.26%

I closed my left side with shapes on it now, I'm not sure how to open in again

Answer:How do i bring up Shapes in visio!!

Not sure what version you're using, but are you referring to the "Category" section? If you close Visio and reopen, it should show up again.

2 more replies
Relevance 35.26%

I have a friend who has asked me to help with bringing up the sound on her computer. The levels in the control panel are set to the highest. She has no volume control on her speakers. It is a new computer and she has sound; it is just too low. What else can we adjust?

Answer:help bring up sound volume

Do the speakers have built-in amplifiers? If not, the only adjustment may be to buy some amplified speakers. The sound outputs on most modern computers are not made to drive speakers directly.

2 more replies
Relevance 35.26%

I am running an HP Pavillion TS 11 Notebook PC with Windows 8.1 with AMD A6-1450. I am connected through my WIFI internet, but cannot bring up any web pages. My ISP tried everything, but my other computers in the house all have no problem. I was in the process of downloading a new version of Norton. It said it removed the old version but could not connect to download the new version. I closed the Windows Firewall.

Answer:Solved: Cannot Bring Up Web Pages

16 more replies
Relevance 35.26%

Alright here's my situation. I have an AMD Athlon 64 3500+ S939. It ran 55ish under full load with the stock fan. So, I went and ordered high end thermal paste, and an ACFP 64, installed it, and flipped some of my case fans to make it more efficiant at moving air. I have two fans at the front and bottom on intake, and I have one on the side and one on the top as exhaust. I'm still getting upper 40s under full load. I'm not overclocking or anything. Any ideas?

Answer:Trying hard to bring CPU temp down...

That's very good considering your CPU... I wouldn't think you would need to go lower... unless your trying to OC like MAD... then you could always H2O it...

9 more replies
Relevance 35.26%

This started this morning. Running Windows 10 Pro. I can run the browser (Chrome), luckily. Word also. But I cannot most other apps (I think), like WinSCP, but not Calc, not Notepad++, not Notepad. If I try to run Calc, it loads in the task try and if I hover the mouse over it I can see the image of it. Same with Notepad++, But if I click on the icon, nothing happens. Word is fine when loading or clicking on the task try icon. Same with Chrome. Same with Edge, Firefox, Visual Studio. So far, limited to Notepad, Notepad++ and Calc but there could be more.

More: Explorer as well.

WELL, not exactly. I use a program called Agent Ransack to search the desktop. I don't use it much but I know that you can click on an Explorer icon and choose the folders you want to search. I did that and explorer came up OK. BUT not from the Start Menu or task bar.

Unfortunately running Explorer from this program limits me to selecting folders.

Answer:Cannot bring some apps to the front

Switch to and bring to the front in Task Mgr does nothing.

If I run Word and then File->Open-Browse, I can use Explorer no problem. Just not from Start or Task Bar.

2 more replies
Relevance 35.26%

cannot bring it on top of my screen saver or on my web page

Answer:I cannot bring my help and support screen up

Check this

2 more replies
Relevance 35.26%

I click on my pic's and all I get is a box that ask me for a key word or phres but it wont bring up my pic's some how I lost or moved all my pic's to some other file or folder

Answer:can't bring up my pic's in the start meneu

You going to have to explain a few things."Can't Bring Up My Pic's In The Start Meneu"The start menu is where the icons are located for launching programs, no pictures there."I click on my pic's and all I get is a box that ask me for a key word or phres"Please explain this further. Are you possibly using a graphics program that the trial period has expired on and it's asking for the registration key?" I lost or moved all my pic's to some other file or folder"You can't move picture files into another file, you might have moved them to another folder. To find them you may have to do a search. Go into Windows Explorer and press CTRL+F then type in *.jpg in the search box and it will show you all your picture files and where they are located.

3 more replies
Relevance 35.26%

I don't know what to do, I only get links to dell with instructions that don't make any sense or don't work.
I reinstalled vista on my 1545 inspiron laptop using the disc that came with it. Now I guess there are no drivers. this means I have no way to put the drivers on my computer since there's no way to connect to the internet (no cd came with the modem which is wireless), no way to use the USB. There is also a disc that came with my computer called drivers and utilities. i put it in and run the program and I dont even know what it does, as far as i can tell it doesn't do anything but show you the problems. There was a part that seems like it installs drivers, but they all say they don't work on my computer. what am i suppose to do, if no one knows is there another place where i can get help cus i called dell tech support and they said they can't help me unless i pay 500$. i have asked here, maybe i'm asking the wrong question but nothing helps

Answer:how can i bring my computer back to the way it was when i first got it

The USB ports should work.

The DVD drive does work. Download the drivers you need from Dell Support, copy/ burn them to CD/DVD and copy them in to the Dell system.

Dell Support -

Regards. . .



1 more replies
Relevance 35.26%

I need to learn how to read the forum rules before I post 8 threads on the same topic.

Answer:BOY!! This'll Bring Win2k/XP To A New Level!

8 more replies
Relevance 35.26%

i know this can be done, just not very sure how,

in a form in access you can enter e.g a driving instructors ID number and his details will automatically appear

but how? in my case the ID number is an autonumber and primary key so in the form at the moment i cant even change the number...

but anyway... any suggestions?

Answer:ID number to bring up details?

11 more replies
Relevance 35.26%

 I can not seem to get my screen with the icons on it. I don't want the window boxesI am on win 7....I'd appreciate the help.

Answer:Win 7 how to bring up the screen with the icons?

Right click taskbar, select "Show desktop".

4 more replies
Relevance 35.26%

i disabled my sound devices after that it says no audio output devices installed...hwlp wat should i do to bring back my sounds on my laptop..

Answer:i need to bring back my sounds

Do you have the correct drivers installed for whatever sound is on the machine?"Channeling the spirit of jboy..."

2 more replies
Relevance 35.26%

whenever i try to bring up internet explorer, i get the message "cannot find 'file:///C:/WINDOWS/s.htm'. Make sure the path of Internet Address is correct.

what do i do?

Answer:i can't bring up internet explorer

Looks like you're trying to use a bad shortcut to open IE. Go to:

Start -- Run -- type in "iexplore.exe" (without quotes) -- Enter

Does your Internet Explorer program start that way? If so, create yourself a new shortcut and delete the old (inoperative) one.



3 more replies
Relevance 35.26%

this is the things i bought
z68xpu ud3 mother board
Intel Core i7 870 processor
8 gb ddr3nano kingmax 1600
hdd 2tb sata 2 black edition
vga sli 590
power supply odin pro
case haf 932 coolermaster

Answer:I got a new desktop since my Alienware bring me down

Thats a little sad.

The Gigabyte Z68XP-UD3 is a Z68 chipset board using the FC-LGA1155 socket. It requires a "Sandy Bridge" LGA1155 CPU ( four digit model number starting with 2. i.e. 2400, 2500, 2600 etc... There are also unlocked three multiplier CPU's suffixed "K" ( 2500K, 2600K and 2700K) for people who like the idea of overclocking. Which brings us to your CPU...

...which is a "Lynnfield" CPU made for FC-LGA1156 for the previous series of Intel motherboards ( P55 primarily).

In short, your CPU is NOT able to work with the board you have chosen. You will need to return it and select a CPU from this range of models.

This is the motherboards product page. You can view the CPU support list from the button on the right-hand side of the page. I would also double check RAM compatibility (either from the board's manual or download a copy of the memory support list ) - the RAM you have listed is rated at quite a large voltage range (1.5 - 1.8 volts)...anything over 1.65 volts will cause your (eventual) CPU to have an incredibly short lifespan.

11 more replies
Relevance 35.26%

I've just got my new X200s including ultrabase and DVD R/W (7469-73G). The warranty service ist "bring-in". I thought that this kind of service usually is "bring-in and return" but German Lenovo service told me that this service is "bring-in and pick-up". Just in case I need Lenovo warranty service I have to send my X200s to Eastern Europe (Bratislava, Slovacia) which is hard to accept because Lenovo has service locations in Germany. Best of all: When repair is finished, I have to pick-up my X200s in Bratislava or ask e.g. UPS for pick-up which is quite pricy for private customers. Is there anybody from Germany or Europe who has experience with Lenovo's bring-in (and pick-up) service?  

Answer:X200s bring-in service

reuchlin, welcome to the forum, I don't know how, but someone perhaps thought you were calling from Slovacia. The information is incorrect.  If you should need warranty service in Germany call 01805 004618 and explain the problem; should it be decided that you need to send your system in for repair you will not be asked to send it to anywhere outside of Germany but rather to Lenovo's repair centre for Germany which is based in Heppenheim. When your system has been repaired they will return it to you at no extra charge. Hope this helps

4 more replies
Relevance 35.26%

Sometimes I cant bring up Internet Explorer. I dont get an error message. I turn off computer, and Sunday that worked, but yesterday it didnt. This morning Im right in. Im not that computer literate. Can you help me?

Answer:Cant bring up Internet Explorer

This condition may happen because your mouse's left click button does not send a signal every time you click it.There may be several factors affecting this: (1) low battery (if you are using wireless mouse) or (2) dirt collecting under the left click button or (3) the drivers of the mouse. Either replace depleted batteries or update mouse drivers or buy a new mouse.RegardsCoolGuy

2 more replies
Relevance 35.26%

Hi, i am going to restore my PC  back to factory settings, in order to get rid of a few problems, however last time i did this when the PC  went to load up (once it had finished) it stopped loading at the point where my backgornd had appeared and nothing else. So only a picture of the defualt xp background was up with no icons or windows toolbar.At this point last time i phoned a pc help phone number (very expensive) and they told me the run command to insert to bring up the winsdows toolbar and once inserted the PC  loaded up as normal and their were no more problems what im asking is for the run command to do this, i can rememeber it involves the words windows and system 32 i think.Thankyou for the help.

Answer:The run command to bring up windoows?

well if you only have you wallpaper.You have to press ctrl+alt+delThen go to file (right top) -> new task.there you have to type explorer(.exe).Hopes this helps you out.Jonas

14 more replies
Relevance 35.26%

Website comes on screen, but immediately goes off, Worked fine until four days ago.......why?

Answer:why i can't bring up newzjunky website

Try deleing your internet history, cookies, temp files, etc then try again.

3 more replies
Relevance 35.26%


There is one particular website that I have been clicking on successfully in my Favorites for quite awhile. Now it will not connect. Often it will attempt to throw me into Acrobat Reader or just hang. Even when I Google the site and click on their link it will do the same thing. So far I haven't discovered any other site that acts this way. When I use another browser I connect easily. I certainly would appreciate any suggestions for a fix. Thank you in advance.

Answer:IE won't bring up site whereas other browsers do

9 more replies
Relevance 35.26%

I was working on a heavily infected computer, that had DNS trojan on it. Soon, the rest of the computers on my network cannot get to Malwarebytes website,
Even my G1 Google Phone, when connected to the WiFi will not make it to the Malwarebytes website. When I switch the phone back to 3G, it gets to the website just fine.

Here are my Logs..
DDS (Ver_09-02-01.01) - NTFSx86
Run by elbo at 14:01:52.64 on Fri 03/13/2009
Internet Explorer: 7.0.6001.18000
Microsoft? Windows Vista? Home Premium 6.0.6001.1.1252.1.1033.18.2037.930 [GMT -5:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\Common Files\Apple\Mobile... Read more

Answer:Cannot bring Malwarebytes website up

I am pretty sure all my systems at this point are clean. I found if I bypassed my Netgear router, connecting directly to my cable modem, I was able to connect to I did a hard reset of the router, but still cant get to Are some viruses attacking routers now?

I think I will see if I can reflash the bios on the router, other than that, I suppose I will have to buy a new router.

All my systems come up clean with Malwarebytes (loaded from USB) and SuperAntiSpyware.

3 more replies
Relevance 35.26%

Hi, I'm trying to bring up a new system on a table in the garage with no case. I call it bring-up "lite" as the config is very lean with no SATA drive yet (it's still in my old machine that's typing this) and an old XP Pro C drive on the lone PATA port. No DVD or Floppy yet as I don't think an optical drive can share the lone PATA ribbon cable with the hard drive, right? I have a GByte GA-G41M Es2H uXTA mobo and E6700 cpu.

Problem is I during the attempted boot, I never get out of the DOS mode with the black background and white text. It seems to get close to trying to bring up Windows, but instead enters an infinite reboot loop. There's a 1/2 blue screen that fly's by to fast to read. I know trying to boot from an existing XP drive with drivers for another mobo can be problamatic. Is that my problem?
Thanks in advance...

Answer:Solved: bring-up problems

11 more replies
Relevance 35.26%
Question: Bring Back Gadgets

Does Anyone have a Working Installer for Gadgets for Windows Pro x64 Final Release.
Either 3rd Party or Tweaks to Reinstate it

Answer:Bring Back Gadgets

Be aware that gadgets are unsafe, and there are working exploits in the wild that can own your machine.

4 more replies
Relevance 35.26%

When I have a link in an email in outlook and click on it, it brings up internet explorer but does not fill in the URL, it just leaves it blank. Is there a setting somewhere that will allow the url to be filled in?


Answer:Links in outlook, don't bring up URL

Hi topspinner

Try this
close all programs:
Start>Run, key in
regsvr32 urlmon.dll
Click Ok

You should see a window telling you whether regsvr32 was successful or not.

See if that makes a difference.

If not, try registering the following additional .dlls, again with all programs closed, so write down the .dlls and remember the space after regsvr32.

regsvr32 Shdocvw.dll
regsvr32 Msjava.dll
regsvr32 Actxprxy.dll
regsvr32 Oleaut32.dll
regsvr32 Mshtml.dll
regsvr32 Browseui.dll
regsvr32 Shell32.dll

If none of the above has worked, see the following links to check your:
URL:Hypertext Transfer Protocol setup.

The following are Microsoft Knowledge Base Articles which cover this problem:

Internet Explorer 6.0 Service Pack 1 may display a blank Web page after you select Auto-Select encoding

Internet shortcuts in Outlook Express do not start Web browser

You cannot open a new Internet Explorer window or nothing occurs after you click a link

OLEXP: "Send To" and E-mail Links Do Not Work Using Outlook Express as Default

Let us know if this works or not or if you need additional help.

2 more replies
Relevance 35.26%

Hello,I am trying to develop a formula/function (FF) in a workbook column of data (e.g. Wkbk "A", column D) that looks at another workbook column of data (e.g. WkBk "B", column C). If the FF in "A" finds a match in "B" it will pull in the data from column Z of "B" into "A", column W. If no match if will do nothing.

Answer:Need 2010 help with IF a matches b then bring in c

If you are looking for a function to search a column, then you are probably looking for VLOOKUP.Read up on it in the Excel help files or DAGS for examples. It's a very powerful function.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

4 more replies
Relevance 35.26%

i bought lenovo G580 with windows 8 pre installed
i upgraded to 8.1
i don't intend to use the refresh PC now but i heard that if i used it it will bring back 8 and i'll have to update it again
is that right ?

Answer:refresh PC , will it bring back 8 ?

This will restore it to 8:

15 more replies
Relevance 35.26%

You know the clock in the taskbar. When you click on it, a calander and clock comes up. However, when I click on it I get an error message. I attached the picture of it in this thread. Anyone know how to correct this?

BTW, I'm running on XP Home.

Answer:Unable to bring up calander

16 more replies
Relevance 35.26%

This started this morning. Running Windows 10 Pro. I can run the browser (Chrome), luckily. Word also. But I cannot most other apps (I think), like WinSCP, but not Calc, not Notepad++, not Notepad. If I try to run Calc, it loads in the task try and if I hover the mouse over it I can see the image of it. Same with Notepad++, But if I click on the icon, nothing happens. Word is fine when loading or clicking on the task try icon. Same with Chrome. Same with Edge, Firefox, Visual Studio. So far, limited to Notepad, Notepad++ and Calc but there could be more.

More: Explorer as well.

WELL, not exactly. I use a program called Agent Ransack to search the desktop. I don't use it much but I know that you can click on an Explorer icon and choose the folders you want to search. I did that and explorer came up OK. BUT not from the Start Menu or task bar.

Unfortunately running Explorer from this program limits me to selecting folders.

Answer:Cannot bring some apps to the front

Switch to and bring to the front in Task Mgr does nothing.

If I run Word and then File->Open-Browse, I can use Explorer no problem. Just not from Start or Task Bar.

more replies