Computer Support Forum

Side by side error stopping all 32bit apps and many window's fucctions

Question: Side by side error stopping all 32bit apps and many window's fucctions

Hi all,
I wounder if some can help me please
I have an error message coming up on all 32bit application that says “the application has failed to start because its side-by-side configuration is incorrect.”
I have done a lot of searching and found that most say I have to uninstall Visual C++ then load an update from Microsoft. That’s great but the side by side error won’t let me uninstall or install anything
I ran sfc /scannow and it found some error and did not fix others The log is below
I hope someone can help
Code:
CBS log
2013-03-28 16:10:08, Info CBS Starting TrustedInstaller initialization.
2013-03-28 16:10:08, Info CBS Loaded Servicing Stack v6.1.7601.17592 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\cbscore.dll
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.05 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fee87a9849 @0x7fee87734e3 @0xff32e97c @0xff32d799 @0xff32db2f)
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.07 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fee87f6816 @0x7fee87c2aac @0x7fee87735b9 @0xff32e97c @0xff32d799)
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.07 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fef5478738 @0x7fef5478866 @0xff32e474 @0xff32d7de @0xff32db2f)
2013-03-28 16:10:10, Info CBS Ending TrustedInstaller initialization.
2013-03-28 16:10:10, Info CBS Starting the TrustedInstaller main loop.
2013-03-28 16:10:10, Info CBS TrustedInstaller service starts successfully.
2013-03-28 16:10:10, Info CBS SQM: Initializing online with Windows opt-in: False
2013-03-28 16:10:10, Info CBS SQM: Cleaning up report files older than 10 days.
2013-03-28 16:10:10, Info CBS SQM: Requesting upload of all unsent reports.
2013-03-28 16:10:10, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL]
2013-03-28 16:10:10, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
2013-03-28 16:10:10, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2013-03-28 16:10:10, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
2013-03-28 16:10:10, Info CBS No startup processing required, TrustedInstaller service was not set as autostart, or else a reboot is still pending.
2013-03-28 16:10:10, Info CBS NonStart: Checking to ensure startup processing was not required.
2013-03-28 16:10:10, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x112fc50
2013-03-28 16:10:10, Info CSI 00000005 Creating NT transaction (seq 1), objectname [6]"(null)"
2013-03-28 16:10:10, Info CSI 00000006 Created NT transaction (seq 1) result 0x00000000, handle @0x220
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.069 CSI perf trace:
CSIPERF:TXCOMMIT;45265
2013-03-28 16:10:10, Info CBS NonStart: Success, startup processing not required as expected.
2013-03-28 16:10:10, Info CBS Startup processing thread terminated normally
2013-03-28 16:10:10, Info CSI 00000008 CSI Store 12157184 (0x0000000000b98100) initialized
2013-03-28 16:10:10, Error CSI 00000009 (F) Invalid attribute name found: [l:42{21}]"ProcessorArchiteature"[gle=0x80004005]
2013-03-28 16:10:10, Error CSI [email protected]/3/28:05:10:10.221 (F) d:\win7sp1_gdr\base\wcp\identity\id_baseidentity.cpp(1263): Error STATUS_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME originated in function Windows::Identity::Rtl::Implementation::CRtlIdentityBase::CRtlIdentityBase_Initialize expression: pBAI != 0
[gle=0x80004005]
2013-03-28 16:10:13, Error CSI 0000000b (F) STATUS_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME #32041# from Windows::Identity::Rtl::Implementation::CRtlIdentityAuthority::IRtlIdentityAuthority_Parse(flags = 0, string = [l:312{156}]"e7ec7425bc5783cd10ed371bbb5001dd, Culture=neutral, Version=6.1.7601.18015, PublicKeyToken=31bf3856ad364e35, ProcessorArchiteature=amd64, versionScope=NonSxS")
[gle=0xd0150017]
2013-03-28 16:10:13, Error CSI 0000000c (F) HRESULT_FROM_WIN32(14091) #31768# from Windows::ServicingAPI::CEnumCSI_COMPONENT::IEnumCSI_COMPONENT_Next(...)[gle=0x8007370b]
2013-03-28 16:10:13, Info CSI 0000000d [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:13, Info CSI 0000000e [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:13, Info CBS Archived backup log: C:\Windows\Logs\CBS\CbsPersist_20130328051008.cab.
2013-03-28 16:10:14, Info CSI 0000000f Repair results created:
POQ 0 starts:

POQ 0 ends.
2013-03-28 16:10:14, Info CSI 00000010 [SR] Verify complete
2013-03-28 16:10:14, Info CSI 00000011 [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:14, Info CSI 00000012 [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:14, Info CSI 00000013 Manifest hash for component [ml:280{140},l:184{92}]"amd64_36b758890f2cc03ad4c1f7b69ba4b785_31bf3856ad364e35_6.1.7601.18015_none_6c9da6435b03b906" does not match expected value.
Expected:{l:32 b:2965ef899fbb0abadf7d0a5696e4394d0d6ad4b11a27cb0cfe457cf58ed7d812}
Found:{l:32 b:2965ef899fbb0abadf7d0a5696e4394d0d6ad4b11a27cb0cfe457cf58cd7d812}.
2013-03-28 16:10:14, Info CSI 00000014 Unable to load manifest for component [ml:280{140},l:184{92}]"amd64_36b758890f2cc03ad4c1f7b69ba4b785_31bf3856ad364e35_6.1.7601.18015_none_6c9da6435b03b906"
2013-03-28 16:10:14, Info CSI 00000015 [SR] Cannot verify component files for 36b758890f2cc03ad4c1f7b69ba4b785, Version = 6.1.7601.18015, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2013-03-28 16:10:15, Info CSI 00000016 Repair results created:
POQ 1 starts:

POQ 1 ends.
2013-03-28 16:10:15, Info CSI 00000017 [SR] Verify complete
2013-03-28 16:10:15, Info CSI 00000018 [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:15, Info CSI 00000019 [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:16, Info CSI 0000001a Repair results created:
POQ 2 starts:

POQ 2 ends.
2013-03-28 16:10:16, Info CSI 0000001b [SR] Verify complete
2013-03-28 16:10:16, Info CSI 0000001c [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:16, Info CSI 0000001d [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:17, Info CSI 0000001e Repair results created:
POQ 3 starts:

POQ 3 ends.
2013-03-28 16:10:17, Info CSI 0000001f [SR] Verify complete
2013-03-28 16:10:18, Info CSI 00000020 [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:18, Info CSI 00000021 [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:19, Info CSI 00000022 Repair results created:
POQ 4 starts:

POQ 4 ends.
2013-03-28 16:10:19, Info CSI 00000023 [SR] Verify complete
2013-03-28 16:10:19, Info CSI 00000024 [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:19, Info CSI 00000025 [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:21, Info CSI 00000026 Repair results created:
POQ 5 starts:

POQ 5 ends.
2013-03-28 16:10:21, Info CSI 00000027 [SR] Verify complete
2013-03-28 16:10:21, Info CSI 00000028 [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:21, Info CSI 00000029 [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:23, Info CSI 0000002a Repair results created:
POQ 6 starts:

POQ 6 ends.
2013-03-28 16:10:23, Info CSI 0000002b [SR] Verify complete
2013-03-28 16:10:23, Info CSI 0000002c [SR] Verifying 100 (0x0000000000000064) components
2013-03-28 16:10:23, Info CSI 0000002d [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:25, Info CSI 0000002e Repair results created:
POQ 7 starts:

POQ 7 ends.
2013-03-28 16:10:25, Info CSI 0000002f [SR] Verify complete
2013-03-28 16:10:25, Error CSI 00000030 (F) Invalid attribute name found: [l:42{21}]"ProcessorArchiteature"[gle=0x80004005]
2013-03-28 16:10:25, Error CSI [email protected]/3/28:05:10:25.292 (F) d:\win7sp1_gdr\base\wcp\identity\id_baseidentity.cpp(1263): Error STATUS_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME originated in function Windows::Identity::Rtl::Implementation::CRtlIdentityBase::CRtlIdentityBase_Initialize expression: pBAI != 0
[gle=0x80004005]
2013-03-28 16:10:25, Error CSI 00000032 (F) STATUS_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME #327814# from Windows::Identity::Rtl::Implementation::CRtlIdentityAuthority::IRtlIdentityAuthority_Parse(flags = 0, string = [l:312{156}]"e7ec7425bc5783cd10ed371bbb5001dd, Culture=neutral, Version=6.1.7601.18015, PublicKeyToken=31bf3856ad364e35, ProcessorArchiteature=amd64, versionScope=NonSxS")
[gle=0xd0150017]
2013-03-28 16:10:25, Error CSI 00000033 (F) HRESULT_FROM_WIN32(14091) #327541# from Windows::ServicingAPI::CEnumCSI_COMPONENT::IEnumCSI_COMPONENT_Next(...)[gle=0x8007370b]
2013-03-28 16:10:25, Info CSI 00000034 [SR] Repairing 1 components
2013-03-28 16:10:25, Info CSI 00000035 [SR] Beginning Verify and Repair transaction
2013-03-28 16:10:25, Info CSI 00000036 Manifest hash for component [ml:280{140},l:184{92}]"amd64_36b758890f2cc03ad4c1f7b69ba4b785_31bf3856ad364e35_6.1.7601.18015_none_6c9da6435b03b906" does not match expected value.
Expected:{l:32 b:2965ef899fbb0abadf7d0a5696e4394d0d6ad4b11a27cb0cfe457cf58ed7d812}
Found:{l:32 b:2965ef899fbb0abadf7d0a5696e4394d0d6ad4b11a27cb0cfe457cf58cd7d812}.
2013-03-28 16:10:25, Info CSI 00000037 Unable to load manifest for component [ml:280{140},l:184{92}]"amd64_36b758890f2cc03ad4c1f7b69ba4b785_31bf3856ad364e35_6.1.7601.18015_none_6c9da6435b03b906"
2013-03-28 16:10:25, Info CSI 00000038 [SR] Cannot verify component files for 36b758890f2cc03ad4c1f7b69ba4b785, Version = 6.1.7601.18015, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2013-03-28 16:10:25, Info CSI 00000039 Repair results created:
POQ 8 starts:

POQ 8 ends.
2013-03-28 16:10:25, Info CSI 0000003a [SR] Repair complete
2013-03-28 16:10:25, Info CSI 0000003b [SR] Committing transaction
2013-03-28 16:10:25, Info CSI 0000003c Creating NT transaction (seq 2), objectname [6]"(null)"
2013-03-28 16:10:25, Info CSI 0000003d Created NT transaction (seq 2) result 0x00000000, handle @0x280
2013-03-28 16:10:25, Info CSI [email protected]/3/28:05:10:25.400 CSI perf trace:
CSIPERF:TXCOMMIT;3
2013-03-28 16:10:25, Info CSI 0000003f [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired

Relevance 100%
Preferred Solution: Side by side error stopping all 32bit apps and many window's fucctions

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Side by side error stopping all 32bit apps and many window's fucctions

Hi scott and Welcome to Seven Forums.

Did you try to boot into safe mode? Or even better a system restore?

6 more replies
Relevance 88.45%

HI all,

Well my low post count is going to get a bit bigger.

On my desktop this morning I received this error,

The application has failed to start because its side by side configuration is incorrect.....
Spent lots of time googleing and have done disc checks, start-up repair sfc /checknow, (or something like that as that was this morning), and all came up ok.

Next coarse of action looks like un-install and re-install of the .net framework and the Visual C++. Now that seems like a good idea but same error is coming up when trying to run the installers as there .exe..

Only managed to get files of the net by laptop.
Looks like repair install might be next

Any advise on how to get the .exe files running would be great. As it seems Im going nowhere till then.

Thanks
Timon

Answer:Side by side configuration incorrect...? Error stopping 95% of .exe

Sorry, also cant uninstall anything through control panel ether... so sad.
Thanks

*Edit*

I had wondered if it could have been a bit of nasty software, as was opening up some links to some screen shots of TPB and had a few more pop ups than I was happy with... closed them all of cause and didn't end up with anything downloaded that I was aware of. Only bring this up as this error seems to be linked with software install problems too.

Thanks

9 more replies
Relevance 78.3%

Hi

I cant remeber if i did anything out of the ordinary when it started, but some time ago(some time ago becouse i havn't had time to fix it) when i started my Windows 7 64bit ASUS laptop every time i opened an .exe file, it said side-by-side configuration incorrect. Later i found out it only happened to x86 programs. Don't know if there is an connection, but windows explorer wasn't working either at all after the same boot, but i managed to get it working again by disabling two shell extensions. (one preinstalled from ASUS, and one named XPClient.FileSystemBrowser.BackupContextMenuExtension.BackupContextMenuExtension)

I've seen some saying to reinstall microsoft visual c++, but as it isn't any 64bit installer, so its impossible at the moment.

(I already posted this in the general discussion, but i think it was the wrong forum, so i reposted it here. Is it possible to delete the previous thread?)

Any suggestions?
Thanks

Answer:Side-by-side configuration incorrect on all 32bit .exe programs

Welcome to Seven Forums janstephan. Actually, there are both versions for x64 systems. Here are the versions I have on my system

Here are the downloads for C++ 2005

http://www.microsoft.com/en-us/downl....aspx?id=21254

http://www.microsoft.com/en-us/downl...s.aspx?id=3387

Here are the 2 downloads for C++ 2008

http://www.microsoft.com/en-us/downl....aspx?id=15336

http://www.microsoft.com/en-us/downl...ils.aspx?id=29

Here are the 2 downloads for C++ 2010

Download Microsoft Visual C++ 2010 Redistributable Package (x64) from Official Microsoft Download Center

Download Microsoft Visual C++ 2010 Redistributable Package (x86) from Official Microsoft Download Center

There are also various SP1 versions, etc. Determine what versions you have already.

Start> In search box type Add or remove programs> Enter

Scroll down to Microsoft Visual C++

A Guy

1 more replies
Relevance 105.78%

Hi there,

So in XP one was able to select open windows from the taskbar via holding CTRL and left clicking on each one, then right clicking and tile / arrange vertically the selected windows...

In windows 7 I cant seem to do it automatically. Yes i can do it manually with three or more windows, but i shouldnt have to.

I cant get three or more windows to tile next to each other, i can only get two windows to go side by side via the snap feature.

Any ideas on how to get three or more windows side by side semi-automatically?

Thanks for reading.
 

Answer:Window snap - How to get three or more windows arranged vertically side by side?

7 more replies
Relevance 104.96%

When there app is stacked it doesnt show picture of app side by side only text

Answer:How i can make it show apps side by side

Hello and welcome to Windows Central.
We would need more information, such as: what device are you referring to? What operating system is your device running? What app are you referring to?
You may create a Windows central account to respond that in this thread.

2 more replies
Relevance 102.91%

I wanted to open 2 folders side by side in same window for ease of dragging and dropping. If not, that would be a cool feature to put in Windows 7.

Btw I just upgraded to vista home premium and its amazing. Fast and no issues.
 

Answer:Possible to open 2 folders side-by-side in same window

6 more replies
Relevance 102.91%

Hello

Window 7 Ulitmate x64

how can i fix this side by side config?
already tried opening sxstrace.exe and run
sfc /scannow but the program & command won't work

sfc /scannow
Windows Resource Protection could not start the repair service.

and then i tried to download and install VC++ downloads,
the download is fininsh and i tried to open vcredist_x64
the error side by side config is incorrect keeps showing up
even in other programs.

how can i fix this error even if i cant install any programs?

thanks in advance

Answer:Window 7: side by side configuration is incorrect

Perform a check disk:

Use the steps below:
Open Computer by clicking the Start button, and then clicking Computer.
Right-click the drive that you want to check, and then click Properties.
Click the Tools tab, and then, under Error-checking, click Check now. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that the scan detects, select Automatically fix file system errors. Otherwise, the disk check will report problems but not fix them.
To perform a thorough check, select Scan for and attempt recovery of bad sectors. This scan attempts to find and repair physical errors on the drive itself, and it can take much longer to complete.
To check for both file errors and physical errors, select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
Click Start.

Depending on the size of your drive, this might take several minutes. For best results, don't use your computer for any other tasks while it is checking for errors.

Update the .NET framework
Download and install the latest .NET Framework
Download Microsoft .NET Framework 3.5 Service Pack 1 from Official Microsoft Download Center

If still the error persists please provide us the error log:
Type eventvwr.msc /s in the address bar.
List any events that are listed as "Error" in the main window when you go to "Windows Logs" and "Application." ... Read more

9 more replies
Relevance 99.22%

First post...

I am coming to you as a last resort. I built my own PC and installed Vista Ultimate 64 bit OEM edition. Has been working fine for ~2 years.
Now every time I attempt to open a program I get the error "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail".

The only progam that is barely working is IE 64 bit edition. I cannot download or run any files.

Microsoft wants 59$ to speak to a technical support representative(What a joke, multibillion dollar company wants extra $ for tech support??...).

Doing a ton of research I have tried various things to remedy this with no avail. System restore did not work. Doing a sfc /scannow in command prompt does not work, it does not even run. Wasted 3 hours of my life doing a thorough checkdisk as well.

The error in the event log is as follows...
Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c..-controls.resources_6595b64144ccf1df_6.0.6001.18000_en-us_72e6f33f34dfabb9.manifest" on line 18. Invalid Xml syntax.

So the problem has to do with this manifest file? I really am clueless as to my next move. I can not download and run anything at all.... Can I do a Vista repair installation with my OEM version?

Should I try and get my hands on a cheap upgrade version of Windows 7?

Answer:Vista x64: Side by side configuration error, no programs work halp :(

Welcome
Until our Forum expert in this area, Niemiro, comes on line, maybe this will give you a lead.
side by side configuration

16 more replies
Relevance 99.22%

When trying to open a number of programmes including Microsoft Works Word processor is "application cannot be opened as side by side configuration is incorrect"

How do I tackle this please!

Answer:Error message: "application cannot be opened as side by side configuration is incorrect"

Hi

To be honest I never meet such problem with the operating system but firstly I would recommend trying to repair the OS.

Boot up the notebook and press F8. Then choose option called Repair the Computer.
Now you will see a some options. Here I would recommend choosing the first option called: Startup Repair.
This option automatically fixes problems that are preventing Windows from starting.
But I?m not quite sure if this is good enough to fix your issue with the system.

If this does not help I would recommend reinstalling this Microsoft Works package.

3 more replies
Relevance 99.22%

i cant open my windows live movie maker due to Side by Side configuration error. Can anyone help me?

Answer:Windows Live movie Maker Side by Side configuration error

Isn't that a Win 7 app?

1 more replies
Relevance 98.81%

Hello

I am usually the person people go to when they have computer issues, but I am not by any means formally educated in any IT field or even familiar with C++, bin, dll files etc. but I am pretty good at figuring out resolutions to fairly complex computer situations both hardware and software related. Unfortunatly I am having quite a few problems with my new Vista laptop that I cannot resolve after trying every suggestion seen online.

1.) It seems to have started with Adobe. I installed adobe reader, and since then all my office programs, adobe, most other applications do not open. The error is a side by side config error. Heres are some examples in event log.
//
Activation context generation failed for "C:\Program Files (x86)\Common Files\Symantec Shared\coShared\Browser\2.0\CoIEPlg.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.
//
Activation context generation failed for "C:\Windows\Microsoft.NET\Framework\v2.0.50727\fusion.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.
//
Activation context generati... Read more

Answer:Multiple issues including Side by Side config error

A quick update...

After going back to the log files to see when the errors exactly started i came across over 500 errors in a single day. They were caused by Symantec. Literally 50 a second for ten minutes these errors were logged, i paged through them and it took me forever.

Activation context generation failed for "C:\Program Files (x86)\Common Files\Symantec Shared\coShared\Browser\2.0\CoIEPlg.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

More error logs that may be usefull

Activation context generation failed for "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Graphics-Full-Existing\MMLoadDrv.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

Activation context generation failed for "C:\Windows\SysWOW64\sirenacm.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.


I finally foun... Read more

6 more replies
Relevance 98.81%

Ok so I am going to go straight into the good stuff.

Essentially I launch Dragon Age and get an error about side by side configuration. I have already done an enormous amount of research on this subject and have found that the problem is usually attributed to the C++ Redistributable from Microsoft.

I tried to remedy this problem 3 different ways (manually working from a system restore point where Dragon Age & Bioshock 2 did not work, but Mass Effect 2, Call of Duty MW2, and the Original Bioshock were still fully functional) this system restore point had the Microsoft 2008 C++ Redistributable installed, and again the games I listed in parenthesis were working fine.

I first uninstalled the 2008 Redistributable and downloaded and installed the 2005 Redistributable, restarted the computer (even though it did not prompt me) and ran into a massive error. Essentially, this install made every game unplayable (all of those I listed above).

Next, I uninstalled the 2005 Redistributable and reinstalled the 2008 without a restart, and tried to launch every game listed above. Of course, I was back to square one, with Dragon Age and Bioshock 2 still giving me the side by side configuration error.

Lastly I tried launching each game through the program 'depends.exe' (using the .exe) to see exactly which dependencies each game required. Of course, both Dragon Age and Bioshock 2 gave me the side by side configuration, telling me that a MSVCP80.dll file could not be found with... Read more

Answer:Side by Side Configuration Error (Attempted several 'easy' fixes already)

This error is by no means fixed, however I thought that I would post in some detailed error information from my event viewer (please read the first post, however, as my problem is unique):

Activation context generation failed for "C:\Program Files\Dragon Age\bin_ship\daorigins.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "c:\program files\2k games\bioshock 2\sp\builds\binaries\BIOSHOCK2.EXE". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
 

1 more replies
Relevance 98.81%

Hi, I'm hoping someone here can help me, I was referred to this forum by nasdaq in the malware removal forum to help with some residual problems I've been having with my hp notebook (http://www.bleepingcomputer.com/forums/t/498613/infected-with-virus-appplicunwntwin32adwareibryteh289567536/
).
 
The following error is popping up when I try to open certain programs on my computer: "The application failed to load because its side-by-side configuration is incorrect.  Please see the application event log or use the command-line sxstrace.exe tool for more detail."
 
I am able to access the sxstrace.exe tool but when I try to get the trace to run, I get an error message- "Access is denied" (see above post for screenshots, etc.).  At first I just noticed this happening with my Kindle for PC, but has now graduated to my Dropbox as well.
 
Any advice on what to do next?

Answer:Error Msg: This application failed to start because its side-by-side configurati

I am currently trying the steps listed here-
 
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/this-application-failed-to-start-because-side-by/7673bf12-87c2-48ca-b5ae-b8aa85e295dc 
 
and will advise.
 
Also- I realize the sxstrace.exe tool may not have worked because I didn't access the cmd prompt in administrator mode which gives me a different prompt: Windows\system32.
 
Will try that as well.

11 more replies
Relevance 98.81%

Hello Richard,

I've run a scan and the result appears encouraging:

"Windows Resource Protection" did not find any integrity violations."

Attached is a copy of the results: sfcdetailsFrancaBB.txt

I'm moving on to the sxstrace ... according to Lorien's directions.

George

Answer:Side-by-side configuration error after Quicken 2010 upgrade

Hello George!

Well done on creating a new thread. Thanks for that!

Well, nothing wrong in the SFC log. That has got to be good - as long as we get a lead from one of the other logs!

Thanks for continuing on. I am afraid that I can do nothing until I get those other logs, as that SFC logs showed nothing wrong.

Again, thank you, and the very best of luck!

Richard

8 more replies
Relevance 98.81%

I have encountered a very stressful problem, whenever I attempt to open Word (2007), or Excel I get an error message which says:
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail."
I have been combing forums for the past 12 hours and have attempted several suggested fixes, to no avail. Such as those suggested:
http://answers.microsoft.com/en-us/office/forum/officeversionother-officeinstall/word-2007-will-not-open-it-says-the-side-by-side/5cf5bc15-8ab8-470b-bb99-df26bade6e4f
An

Answer:Side By Side Configuration Error when Opening Word 2007

Don't know if this will help CLICK HERE

3 more replies
Relevance 98.81%

I have Vista. When someone sends me an Adobe document I can't open it. The error message says that my side by side configuration is inaccurate. If I save the document to my desktop, I can then open Adobe and open it from there but it is a hassle. Why can't I just open the document from the source?

Answer:Adobe Reader - side by side configuration is inaccurate error

Latest version of Acrobat? Tried uninstalling and re-installing to see if it fixes it?

Didn't do something silly like use a duplicate file utility or remove things from the WinSxS folder?

Better option, use Foxit instead,

Foxit Software - Foxit Reader for Windows

2 more replies
Relevance 98.81%

On quite a few different programs, i'm getting the error message:

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail"

I've read so many forums online where people have had a similar issue, but nothing has been helpful. The most common suggestion is related to VisualC++ but when i installed it, I got the same error! I tried running it without saving, then I saved it and tried running it, again the same error.

I've opened the event viewer, theres quite a few 'sidebyside' error messages, but I dont know what to do with any of that information. The first side by side error is this one:

Microsoft.Windows.Common-Controls,language="&#x2a;",processorArchitecture="X86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"
C:\Program Files (x86)\Microsoft Silverlight\4.0.50524.0\Silverlight.Configuration.exe

I havn't a clue how it started, my computer was fine yesterday, I opened it today to these errors, I tried rebooting but it didnt help.

If any more information is needed, I'll provide what I can.
Thanks

Answer:side-by-side configuration is incorrect error on multiple programs?

Follow the instructions here http://support.microsoft.com/kb/929135 to install VisualC++

3 more replies
Relevance 98.81%

Suddenly out of the blue nothing opens - Am not a programmer and don't understand all this lingo have 4 0r 5 redistributible programs C++ 2005, 2008 etc with all relevant service packs - NO LUCK - this is killing me am looking for work and can't get to my resume can't open any programs at all - adobe, microsoft office NOTHING please tell me how to restore my system files to default and start over
 

More replies
Relevance 98.81%

Windows 7, on Toshiba Laptop, all of the recent windows updates have been installed.
I was having issues running the new zynga game on facebook, the ville. I assumed that it was a resource hog and didn?t like the laptop, and it was possible that I didn?t have the most recent installment of Adobe flash, so I upgraded that as well. It still wouldn?t run. So I decided to clean up the hard drive.
I used control panel to uninstall a game that the kids no longer play because it?s now obsolete. I also uninstalled Quickbooks (it wasn?t just quickbooks, it was a bunch of crapware that was installed on the laptop when we purchased it, but since we don?t use quickbook I figured we could get rid of it.) the only reason I bother stating all of this is because I believe in full disclosure. You never know which action caused the issue so it?s best to tell it all. Sorry for the ramble.
I have been noticing that the machine was running slower lately, so that is why I decided to de-clutter the hard drive.
After doing this and rebooting I found that I was unable to run Rockmelt, it came up with the following:
Error: The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace.exe tool for more detail
I consider myself a fair pc tech so I have been troubleshooting this for most of the day by searching it out on the internet, for the most part I have been told to update the C++ redist, I have m... Read more

More replies
Relevance 98.81%

So far I have done this and it did not help:

1. Open an elevated command prompt. To do this, click Start, click All
Programs, click Accessories, right-click Command Prompt, and then click Run
as administrator. If you are prompted for an administrator password or for a
confirmation, type the password, or click Allow/Continue.

2. Type the following command, and then press ENTER:
sfc /scannow
(The sfc /scannow command scans all protected system files and replaces
incorrect versions with correct Microsoft versions.)


FYI, She gets the message when trying to launch the Second Life Phoenix Viewer, however Second Lifes Viewer 2 loads without error.

I am going to perform a CHKDSK on her Lenovo as recommended in an archived thread from this forum and hopefully that will solve the issue. Can anybody think of anything else?

Answer:Experiencing (side by side application error). Need troubleshooting tips

What is the application error? Can you upload a snip

See How to Use the Snipping Tool in Vista For More Information

5 more replies
Relevance 97.58%

I know computers fairly well, however I am new to 64 bit.
For some strange reason my Vista 64 started giving me side by side errors.
Every single 32 bit (Program files(x86)) app give me the error, while any 64 bit apps dont.

Trolling for a few hours I found the most common solution to be installing vcredist_x86 This file wont install it gives me the same error.

So I downloaded vcredist_x64, but this file is built with a 32 bit self extractor and results with the same error. I Tried uninstalling the Visual Studio 05 but it gives me a windows installer can not be accessed.

Is there some trigger that can enable windows 32 bit installs to work and I can install vcredist_x86? Thanks.
 

More replies
Relevance 97.58%

I've tried deleting both of those and the one for the viewer can be removed but the windows one I can't do anything too.


Activation context generation failed for "C:\Program Files\Phoenix Viewer\PhoenixViewer.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_d0893820442e7fe4.manifest. Component 2: C:\Program Files\Phoenix Viewer\Microsoft.VC80.CRT.MANIFEST.

Answer:Phoenix Viewer [Event ID:78 Side by Side Error]

Hello and welcome

What process did you use to attempt to delete them, where and how.


americancritic

13 more replies
Relevance 97.58%

I just got a new HP desktop computer with Vista Home Premium SP1 loaded. I am trying to install an older Photosmart C6150 All-in-One printer. I downloaded the latest software from the HP webside. After install, the printer works great. When I run HP Solution Center to initiate a scanning operation, I get the following error message:

"C:\Program Files\HP\Digital Imaging\bin\hpqkygrp.exe The application has failed to start because its side-by-side configuration is incorrect. See event log...".

I have tried everything I can think of. I have used the L4 uninstall, disabled antivirus, cleaned the registry, etc. Nothing works. I spent hours on the HP web contact site but got no useful help. From searching other forums (including HP's) I know other people have experienced this or similar problems. Does anyone have a solution?

Answer:HP Solution Center side-by-side error message

Re: 'The application has failed to start because it's side-by-side configuration is incorrectThis problem has annoyed me for months now, so I decided to have another go and I have just worked out how to successfully fix this issue!!!!!!!The file that has the problem is a manifest file that is required for any program written in Microsoft Visual C.In my case the file existed but was completely empty. The file is "C:\WINDOWS\WINXSX\MANIFESTS\x86_policy.8.0.microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.762_none_8a14c0566bec5b24.manifest"As this is a system file, you cannot delete it from Vista (even with admin privileges) so first you have to take ownership of the file. To do, this follow the instructions on this link:"http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-s...sta/"Once you own the file delete it and then reinstall the program that is failing (MS Flight Sim X Trail in my case).Everything now works absolutely fine.hardwareanalysis.com

4 more replies
Relevance 97.58%

Hey guys im having a problem with Windows Live Messenger.

Activation context generation failed for "C:\Program Files\Windows Live\Messenger\msnmsgr.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest.

This is what is displayed in my Event Viewer and i have no idea to fix it. Any help would be greately appreciated.

Andrew

Answer:Windows Live Side-by-Side Configuration Error

Hello Andrew!

Welcome to the Vista Forums! I hope you enjoy your time here! Thanks for creating a new thread!

This error isn't the easiest to fix, but it also shouldn't be impossible.

Basically, although Windows can store two different version of a component, it cannot actually run two different versions at the same time.

The main available versions for that component are:


Code:
file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_bcb86ed6ac711f91.manifest

file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest

file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest

file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4974_none_50940634bcb759cb.manifest
As you can see, neither of the conflicting components is using the very latest file version. Now, what to do about it!

Windows Live is a Microsoft product. It is unusual for a Microsoft Product to have this sort of old file versioning issue, as long as it is up to date.

Can you please download a new copy of Windows Live Messenger from here: Windows Live Messenger 2011 - Instant messaging (IM), video chat

and install all of your Windows Updates.

If this doesn't fix it, we can look at more technical fixes, but hopefully we won't have to go there.

Thanks again, and the very best of luck,

Richard

17 more replies
Relevance 97.58%

This has to be one of the most puzzling errors I've seen in awhile. Last night I was in the middle of playing quake wars when my computer BSOD on me.

On checking the event logs I got this strange side by side context activation error with ServerLauncher.exe of quake wars... Thing is I wasn't running a server.

Then out of the blue, not playing quake wars, just browsing, I got the SAME error again, side by side context activation with... serverlauncher. WTF? I hadn't fired up the game since it BSOD'ed the night before.

On looking up what this is about, I've found no relation to serverlauncher, but the same error linked to random programs that go from visual studio 8 (which I don't have installed), to some media software, to msn dll's etc...

I'm wondering if anyone else has some insight to this...
 

More replies
Relevance 97.58%

All, excuse my lack of computer knowledge but is there anyone out there who can dumb down an explantion or solution to the barrage of side by side config errors I just started getting whenever I try to run any application (e.g. Office or Photoshop)? I have literally scoured the posts/forums/internet looking for solutions and I think a lot of my problem is I don't know the lingo so the explanations look like they are writtien in Klingon. For instance, one suggestions was to run sxstrace.exe. How the heck do you do that? WHere do you do that? What do you do with the results? The example looked like a bunch of gobblygook was produced. I am sorry to drag this forum down, but maybe there are some tired experts out there tonight who are happy to use minimal brain effort to try to explain how I might resolve this. I appreciate any and all assistance!

Your humble amateur friend,

Betty

Answer:Help for side-by-side config error...not written in Klingon

Originally Posted by Moraga Betty


All, excuse my lack of computer knowledge but is there anyone out there who can dumb down an explantion or solution to the barrage of side by side config errors I just started getting whenever I try to run any application (e.g. Office or Photoshop)? I have literally scoured the posts/forums/internet looking for solutions and I think a lot of my problem is I don't know the lingo so the explanations look like they are writtien in Klingon. For instance, one suggestions was to run sxstrace.exe. How the heck do you do that? WHere do you do that? What do you do with the results? The example looked like a bunch of gobblygook was produced. I am sorry to drag this forum down, but maybe there are some tired experts out there tonight who are happy to use minimal brain effort to try to explain how I might resolve this. I appreciate any and all assistance!

Your humble amateur friend,

Betty



Betty, no worries, you sound just like my friend.

Can you explain the error with a little more detail? When does it occur, what you are doing when it happens? Perhaps a screenshot of the error?

~Lordbob

11 more replies
Relevance 97.58%

Hi everyone,

I am really new and not technically savvy like most of you seem to be!

I actually tried upgrading my iphone and that lead to having to upgrade itunes and that returned a side by side configuration error which I have spent hours trying to google and resolve - with no success. If anyone could help it would be greatly appreciated! I'm not sure what info you need or even where to start anymore. Thanks in advance.

Answer:Side by side configuration error when trying to install itunes

Hello megang,

My daughter's name is Megan Grace (MeganG) - you're not her are you?

Try running the System File Checker (SFC) - follow Option 2 of this SevenForums tutorial and attach your results (see option three to "shrink" the results) when you next post. You might have to run SFC a few times to completely resolve the SxS issues.

9 more replies
Relevance 97.58%

Good Morning,
I have three identical machines all running Vista Home Premium with Service Pack 2. All three have Office Home and Student 2010 installed. On one machine I have to keep uninstalling and reinstalling Office because I get the side by side configuration error on a random and recurring basis. Is there a permanent fix for this? I have the free upgrade for Windows 7 Home Premium for all three machines but have not used them because I am generally happy with Vista. Would upgrading to Win7 possibly help?
Thanks in advance for any help.

More replies
Relevance 97.58%

For some strange reason my Vista 64 started giving me side by side errors.
Every single 32 bit (Program files(x86)) app give me the error, while any 64 bit apps dont.
Trolling for a few hours I found the most common solution to be installing vcredist_x86 This file wont install it gives me the same error.
So I downloaded vcredist_x64, but this file is built with a 32 bit self extractor and results with the same error. I Tried uninstalling the Visual Studio 05 but it gives me a windows installer can not be accessed.
I have tried using a restore point, I have tried sfc /f and it made a log that I am unable to read.
Is there some trigger that can enable windows 32 bit installs to work and I can install vcredist_x86? Thanks.

More replies
Relevance 97.58%

Running Windows 7. MS Office Basic 2007 will not open up word, excel, and outlook. I get the side by side configuration error. In checking the event log, it says that the Snap MMC would not start. I am totally lost and do not want to reformatt the hard drive.

I have uninstalled all the .NET programs and the office program. I ran all the Windows updates. I uninstalled the Visual C ++ programs and reinstalled them.

Please help.
 

Answer:Office 2007 side by side configuration error

Hi, welcome to the forum,

I have never heard of this but found this using Google :

http://www.codeproject.com/KB/winsdk/sidebysideerror.aspx

Maybe you can find your solution here,

Good luck

BTW, no need to format.
 

1 more replies
Relevance 97.58%

Hi,
My Logitech wireless mouse and keyboard worked fine on Vista 64 Premium. Since upgrading to Vista 64 Ultimate, I get side-by-side configuration errors. I've uninstalled Setpoint, downloaded newer versions, reinstalled, installed the C++ Redistributable Package, but nothing eliminates the error. Has anyone had any success in resolving this problem?

Answer:Ultimate 64 Setpoint side by side configuration error

Hi newcitysue

Click the link in my sig and under step 2 download and install everything there, then reboot

1 more replies
Relevance 97.58%

Win 7 64 bit SP1. Attempting to install m-audio 2496 driver version 6_0_8 using an exe file. I was told to do this by m-audio support to try to overcome some problems with clicks and crackles in the card.

But when I try to run the installer, I get the message that the application has failed to start because its side by side configuration is incorrect.

Support told me to try to install the drivers manually using the device manager (!) but as I pointed out to them that does not work because ....the drivers are tied up in the exe file.....however....

Then it was suggested that I install C++ 2008 redist. That did not work.

So what is causing this side by side error?

It's nearly two weeks now since I started to ask them for help, so I am a little desperate. Any help would be appreciated.

Nick

Answer:[SOLVED] Driver won't install 'side by side' error

Ask the tech support personel if the driver is for a 64bit version of Windows. If it is not as him or her if they have 32bit drivers.

5 more replies
Relevance 95.94%

I'm trying to install free software called audacity. I'm facing the error of "side by side configuration". I was facing this trouble in windows 7. Feeling frustrated, I updated to windows 10. Unfortunately, this error is still there and I am unable to install this free software. I also double checked and downloaded the exe again but the trouble is not gone. Please help

Answer:Error - side by side configuration as incorrect.

Hello, archz3.

Please try the following:

1. Open your start menu.
2. Search %temp%, and press enter.
3. Delete the files in the temp folder.
4. Restart your computer.
5. Re install Audacity.

Also, cleaning out your %temp% folder every 2-3 days is good, it removes files that you don't need, freeing up some space on your harddrive.

3 more replies
Relevance 95.94%

Ok I need some urgent help. I cannot start ANY program in my PC all I get is this error message >> .
Even when I download some file I can't start it it gives the same error, so basically 95% of my programs don't work. *** is this?

More replies
Relevance 95.94%

Hello Everyone:

I am trying to install Dragon Naturally Speaking 11 to my Windows 8 Machine

It was installed at one time.

Then, I got a wierd dialog box from Office 2013 that asked me if I wanted to do something to...I don't even remember what it said. I clicked yes to it because I was trying to get Office installed.

Then the next time I went looking for Drgaon it was no longer installed.

So I ran the set up to reinstall it and it is giving me a Side By Side Configuration Error.

So I did what the message said, and checked the event viewer.

It said that the Error was Error Code 59, and I have no idea what that is.

So, I ran sfc and scannow.

It said everything was cool.

So, I then ran the sxs thing. But to be honest, I wasn't too sure what I was looking for.

So I went to look for System Restore, and I dont even see the option to return the computer to a state that it was before Office 2013.

So I decided to just run System Retore to the earliest possible date.

Then System Restore doesn't go past initializing for about an hour. So I can't even get this thing to run.

This is a new laptop and I have never had so many frustrations with it. Windows 8 is a killer.

Any way, if any one has any suggestions on other stuff I could try that would be the coolest.

Peace,
CT

Answer:Side By Side Error 59 Trying To Install Dragon

Your best/safest/quickest option is to restore the laptop to its original factory settings and start over. An SXS error is rare but serious - and there aren't any tools available for fixing problems with the WINSXS folder.

1 more replies
Relevance 95.94%

Hello,
I have always lurked around the site,
but this is my first ever post for help
=)

My problem is this:
I am running Windows Vista 64 bit on an ASUS laptop and, after some "experimenting" with binding EXE's on XP and moving them over to Vista,
I started receiving the dreaded error message "This program has failed to start because it's side by side configuration is incorrect". Now, I'm no noob when it comes to computers...
But I have tried everything I can think of to resolve this problem.
THe most common solution I have found is to install the Visual C++ Redistributable, thing is...
When I run the installation EXE, the same error appears.
I have attempted running in safe mode, system restore, and all the usual options, and every thread with this same problem is often ignored, therefore I have not been able to find a solution.

Can ANYONE here please help me?
My father needs this laptop for his work...
and it has been out of commission for almost a week now,
so any help short of a repair installation would be greatly, greatly appreciated.
 

Answer:Side by Side configuration error- on every program!

Hmm, so as I was spending my night last night trying to fix it...
I realized that I am able to install the 32 bit Redistributable,
but it makes no difference...
Does no one have a solution?
='[
*EDIT*
Crap,
sorry,
I just saw this button after I posted...
=X
 

1 more replies
Relevance 95.94%

Hi

I am using Windows 7 X64 with 16 GB ram. I recently noticed in event viewer an error message that started on May 7th and every time I boot into windows this errror message appears. I have tried to repair and uninstall and reinstall Microsoft Visual C++ 2008 and 2010 x64 and x86 without any success of the error going away. I checked on google for the error and was told its not an error to be conserned about but I would like to get ride of it finally

Any help would be appreciated
Here is the error message

Activation context generation failed for "C:\Windows\Installer\{EA1FAE0F-2354-4E32-B423-ABAE8E358F91}\recordingmanager.exe". Dependent Assembly rpshellextension.1.0,language="&#x2a;",type="win32",version="1.0.0.0" could not be found. Please use sxstrace.exe for detailed diagnosis.
- System

- Provider

[ Name] SideBySide

- EventID 33

[ Qualifiers] 49409

Level 2

Task 0

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2013-05-15T21:30:02.000000000Z

EventRecordID 1326908

Channel Application

Computer ReuvenA-PC

Security
- EventData

rpshellextension.1.0,language="&#x2a;",type="win32",version="1.0.0.0"
C:\Windows\Installer\{EA1FAE0F-2354-4E32-B423-ABAE8E358F91}\recordingmanager.exe

Thanks
RussellTA

Answer:Side by Side error in Event Viewer

I was able to find out what was causing the issue. It was realplayer of recordingmanger.exe. I was able to take a strace and posted it below

ANy help would be great
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-US;en
ManifestPath = C:\Windows\SysWOW64\iepeers.dll
AssemblyDirectory = C:\Windows\SysWOW64\
Application Config File =
-----------------
INFO: Parsing Manifest File C:\Windows\SysWOW64\iepeers.dll.
INFO: Manifest Definition Identity is WindowsShell,processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",type="win32",version="1.0 .0.0".
INFO: Reference: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",type="win32",ver sion="6.0.0.0"
INFO: Resolving reference Microsoft.Windows.Common-Controls,language="*",processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",type="win32",ver sion="6.0.0.0".
INFO: Resolving reference for ProcessorArchitecture WOW64.
INFO: Resolving reference for culture en-US.
INFO: Applying Binding Policy.
INFO: No publisher policy found.
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.Windows.Common-... Read more

9 more replies
Relevance 95.94%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 8181 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 699987 MB, Free - 355233 MB; D: Total - 15359 MB, Free - 7490 MB; J: Total - 953859 MB, Free - 17 MB;
Motherboard: Dell Inc., 0N826N
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled

Using the above system, I downloaded the trial version of PaintShop Pro X4 Ultimate. After installation, I clicked on the icon to start the program, and I get this error message:
(Red X) C:\Program Fileks (x86)\Corel\Corel PaintShop Pro X4\Corel PaintShop Pro.exe

The application has failed to start because its side-by-side configuration is incorrect. Please
see the application event log or use the command-line sxstrace.exe tool for more detail.
This program is the ONLY ONE that comes up with the error message. My PaintShop Pro X2 Ultimate runs fine. I have tried most of the solutions found in this forum and Microsoft's with no success. Thanks.
 

More replies
Relevance 95.94%

Hi all,

I've booted my computer today and now I am unable to run any program at all, I have read some threads that installing the C++ redistributables can fix this problem but of course I am unable to run those as well, also tried a registry tweak but no change:

"Error: The application has failed to start because the side by side configuration is incorrect"

I've ran 'sfc /scannow' and it's found errors, the logs reads:

Answer:Can't run any .exe files (side by side config error)

Hi, the log failed to be attached.
Could you try again please.
Open Notepad, save the log to it, then save on your desktop, as it may be quite long use these brackets around it [ code] [ /code] then copy and paste into a reply.
Hopefully that should do the trick.
(remove spaces from inside brackets)

11 more replies
Relevance 95.94%

Working on a client's computer running Win 7 Home Premium and Office 2010. When opening Excel it crashes stating there is an "side by side" error, event ID 59.
 
here's the dialog box: "C:\Program Files (x86)\Microsoft Office\Office14\EXCEL,EXE The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail"
 
Following is from the event log:
 
Activation content generation failed for "C:\Program Files (x86)\Microsoft Office\Office14\EXCEL.EXE.Manifest" on line 0. Invalid Xml syntax.
 
Also PowerPoint opens OK but when trying to open a file it says that there is a problem with the content of the file. Attempts to repair don't work. The file opens on other systems so it is not the file.
 
I've tried uninstalling and reinstalling the C++ packages with no help. Any help would be appreciated.

Answer:"side by side" error in Excel 2010

Right-click "Microsoft Office 2010" in "Uninstall or change a program" and select "Change". Select "Repair", click the "Continue" button and follow the onscreen instructions.

6 more replies
Relevance 95.94%

Hi!

I need help with big error. I'd try to install Adobe Premier Element, but i got error message "the application has failed to start because its side by side configuration is incorrect, please see application event log or use the command line sxstrace.exe tool for more detail"

After that nothing on my windows is working, except 64 bit explorer and only few programs. I cant listen mp3, watch videos, messenger and email is not working, i get that same error.

I read that it has something to do with tracelog and some file with missing parameters. I made tracelog but i cant open that file with any editor what it says need to fix. Heres my tracelog:


Code:

=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-US;en
ManifestPath = C:\Program Files (x86)\Windows Media Player\wmplayer.exe
AssemblyDirectory = C:\Program Files (x86)\Windows Media Player\
Application Config File =
-----------------
INFO: Parsing Manifest File C:\Program Files (x86)\Windows Media Player\wmplayer.exe.
INFO: Manifest Definition Identity is Microsoft.Windows.WMplayer,processorArchitecture="*",type="win32",version="8.0.0.0".
INFO: Reference: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="*",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"
INFO: Resolving reference Microsoft.Windows.Commo... Read more

Answer:Major side by side error on Win7 x64

Download Security Check by screen317 from here http://screen317.spywareinfoforum.org/SecurityCheck.exe or here http://screen317.changelog.fr/SecurityCheck.exe
Save it to your Desktop.
Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.
A Notepad document should open automatically called checkup.txt.
Please post the contents of that document.

3 more replies
Relevance 95.94%

This problem appears after the Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3198586) update.

After the update, several applications will not run - the error stating "its side-by-side configuration is incorrect" Deleting the update resolves the problem, but I can't seem to block the update.
Intel Core i7-2600 CPU @ 3.40GHz, 16.0 GB memory, 64-bit operating system

(Update doesn't seem to affect my Dell XPS 14 laptop)

How do I fix this issue?

More replies
Relevance 95.94%

Okay, so my computer (Toshiba Satellite M305-S4848) was working perfectly fine this morning, then it died because the charger fell out. When I tried to turn it back on, it said that Windows could not start up & took me to the start up repair screen. Apparently, it tried to repair itself & let me start my computer up, but now, whenever I try to open ANY program, it has that side-by-side configuration error. When I tried searching for a solution, other forums said to open a command prompt and type in sfc /scannow which I did & it gave me the results, but now IDK what to do...someone please help!!!

Answer:PLEASE HELP! Side-by-side configuration error on ALL programs

We have this recent thread on the subject. Pay particular attention to comments made my Lorien and Niemiro
side by side configuration
The two mentioned, above, have the most pertitent answers to the problem and they are two of the best. Hope that they can help you.

4 more replies
Relevance 95.94%

-Foreword-
So I recently acquired a Vista and found out (through some heavy usage of Google) that it was an extremely annoying issue some users were facing. I figured out how to over-come this error quite simply.

-Tutorial-
This is a tutorial on how to fix "side by side configuration" errors when launching programs from Vista. SBS configuration error is basically when a program refers to something that it can't find in C++. This is caused by corrupted C++ libraries, or non-existent libraries. The following tutorial shows you how to remove all C++ libraries and update to the current version on your computer.

1. Click on the start button, choose "Control Panel"
2. Navigate down to "Programs>Uninstall a program" (in classic view it's labeled "Programs and Features")
3. Navigate down to "Microsoft Visual C++ 20## Redistributable" ## = 05, 08, 10, or 12.
4. Uninstall all of them.
5. In the following steps choose # 32. for 32-bit systems and # 64. for 64-bit systems. Click on the links, download and install them in order one at a time. Delete the installers after use, all of the installers are named the same thing so they will just append (vcredist.exe, vcredist (1).exe, vcredist (2).exe) making it difficult to keep track of which you have installed. <b>To determine your os version</b>, open the start menu. Right click on computer and choose "Properties". In the "System" section, look for "S... Read more

Answer:Fix: Side by Side program launch error

Good job but IMO you should group 6-8 by OS type (ie 32 or 64 bit). Perhaps step five should be instructions on how to determine the OS type.






5) How to determine version

32 bit version
6)
7)
8)

64 bit version
6)
7)
8)



If this where me and I didn't know much about computers I would find that easier. Also 10 doesn't make much sense.

2 more replies
Relevance 95.94%

Hello,

tried to follow the other posts to correct this, but, no luck as yet.

I started CMD prompt, going in as administrator, I ran sfc /scannow and it returns with... "windows resource protection could not start the repair service"

I cannot d/load any c++ 20xx redistributables, etc, as code 1935 pops up.

I tried to get around the 1935 code by renaming mscoree. I managed to rename it by taking ownership, but, still could not d/load the c++ files.

I am well out my depth here and have been trying unsuccessfully to overcome these problems, so, any guidence/help would be most appreceiated.

My computer is an HP6720s running Vista32. All my problems started when I installed Bitdefender 2011 total security. Which will not run due to the side by side config. I did purchase a registry cleaner that found lots of issues, but sorted them all as far as I am aware.

Thanks in advance for any help


Ricky

Answer:side by side config / error 1935

Hi,

Look here for some infrmation & try the suggested option: -

Error code 1935 while installing Microsoft Visual C&#43;&#43; 2008 SP1 - Microsoft Answers

3 more replies
Relevance 95.94%

Hello all,

I apologize if this has problem been answered already but this thread is pretty long and to read every last one... well that would take a while. I'd been trolling around the site for a couple of hours before I decided to register and post here. The first part is a summary, the second is a repeat in words with a bit more detail.

History of problem:

1. Initial error: nvstorfl.dll corrupt or missing. BSOD a couple of times.
2. Then after startup repair fails, no boot.
3. Using Ubuntu disc, I replace nvstorfl.dll with known good from C:\Windows\DriverStore~
4. System boots, however now new error at 64 bit program launch - some other DLL and no Aero. Try to turn on Aero, but it says theme not compatible and Windows Desktop Manager is not on.
5. Frustrated, I commence with a repair install using burned win7 64 sp1 iso from mydigitallife.
6. After repair, some programs open, some don't. Happening to both 32 bit and 64 bit programs now. The error now is "side-by-side configuration is incorrect".

Anyway, this is how it all happened. After trying to hotswap some hardware (sata DVD rom), I got a BSOD which led to errors in opening x64 programs. They opened, but an error message was displayed citing nvstorfl.dll as being corrupt or missing. After a couple of BSODs, I couldn't boot. So, remembering that nvstor~ had been mentioned in the error, I booted through Ubuntu 11 and went to the directory for nvstor~. The file had size 0 KB. So, I copied another versio... Read more

Answer:Side-by-side error after repair install

I'd uninstall the Nvidia software package if you dont' use special settings and run only with the driver.

Turn it off first in msconfig>Startup and >Services (after hiding all MS services) or it will leave its Reg key droppings there, and it still might.

3 more replies
Relevance 95.94%

Need ur help. Right now im using personal laptop at home. I tried to install AVG 8.5 last 2 days and after installing in which it cant be installed,..i mean after rollback,my software are having probs. When I tried to open a microsoft word document, it shows an error msg..' The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.'

I did once installed C++ redistributable package x64 bit but wen i realised that mine is x32 i immediately uninstall but still the above error appears

Could you help me see wats wrong with it and what should i do..I cant do system restore to earlier date as the earliest date is after i installed the avg 8.5..Pls reply soonest possible..
 

Answer:Side by side configuration error in Vista 32 bit

If AVG won't install (though you didn't mention why), it may be because you are infected.

Read the sticky and post a log in the Malware forum. After cleaning, you can then deal with other problems.
 

2 more replies
Relevance 95.94%

I have trouble running a few applications as of late idk why i have tried every combination of vc++ redist versions 2005-8-10-12 and reverse .
Tried reinstalling every version of .net framework 1,2,3.5,4,4.5 etc.
Tried reinstalling the programs with the vc++ redist in the disk.
The problem arises when i try running:-
1. Civilization 5 (Gold box edition)
2.Microsoft Office 2010(pro)
as of now the other programs run fine.
Also seems to affect my usb 3g dongle(huwai).
Would really appreciate help on the matter without quotes or links .
Thanks!

Answer:Side By Side Config Error. Win 7 Ultimate x64.

Please follow the Windows Update Posting Instructions and post the requested data

1 more replies
Relevance 95.94%

Hi:

I am using Vista 64 Home Premium and Nero 8.

In the event viewer, I often see the following error:

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero8\Nero Toolkit\DiscSpeed.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_1509f852f40ee5cd.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest.

I do have DiscSpeed.exe installed with Nero 8.

I do not have any problem burning CDs, ....

..but would like to get rid of this error (without un-installing DiscSpeed.exe ) and find out what manifests are , why are they conflicting??
Regards

More replies
Relevance 95.94%

Today I've tried to update my Yahoo Messenger to version 11.5. 'Till today everything functioned well, but when I've tried to install the newer version I've got the error:

This application has failed to start because its side-by-side configuration is incorrect.Please see the application event log or use the command-line sxtrace.exe tool for more detail.

How can I fix this, because no other (older) versions will now install.
Also, I would like to point out that i have Windows 7 x64 Ultimate SP1, MS Visual C++ 2005 & 2008 Redist and .NET FX 4.0 already installed.

Please help !
 

More replies
Relevance 95.94%

I've been running into a problem on my windows vista 64-bit, starting this morning, and can't seem to fix it. I tried opening itunes, mozilla, crysis, and other programs, and every time I do I get the error message:
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail."
I checked in my event log, and it says the side-by-side error is number 33, if that helps. I've been online for hours now, and can only find the solution to download Microsoft Visual C++ 2005 SP1 (file name: vcredist_x86.exe) but as soon as I try to run the program I get the same side-by-side error.

any help would be appreciated
 

More replies
Relevance 95.94%

OK iv google and googled and tried uninstalling and reinstalling. Is ther a common soloution to this problem? I installed 3dsmax, but I get an error when tryin to open the program.

The application has failed to work because its side-by-side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail.

Im running windows 7,tryin to install 3dsmax 64 bit. Any more information I can provide

Appreciate any help
 

Answer:Side by side error after installing 3DS Max on Windows 7

See How to Fix Visual C++ Library Missing / SidebySide Application Failed to Start Errors

You'll need to first look up the error mesage in your Event Logs. Take a look through link above and post back if you still need help
 

4 more replies
Relevance 95.94%

I am a complete computer noob so forgive me if the solution to this is really simple....

As of maybe two days ago, whenever I try to open programs (mostly Microsoft Office programs i.e. Word, Powerpoint etc.) and also Acrobat Reader I get the following error message:
This file does not have a program associated with it for performing this action. Create an association in the Set Associations control panel.

And when I try to open a file or MSN Messenger I get this:
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.


Any advice/assistance anyone could offer would be greatly appreciated. I have already run a System Restore as this is pretty much the only troubleshooting measure I actually know how to do, but given clear instructions I have been able to successfully fix things by myself in the past. Please also advice me if you think I might risk wiping my whole computer or something else dire like that because I can wait until the weekend and just get my computer savvy friend to come and have a look. Is it possible that this could be caused by a virus? I haven't installed any updates or anything recently so I don't think that would be the cause.

Thanks in advance.

Answer:This file does not have a program associated with it/side-by-side error

Anyone??

I was thinking of purchasing a copy of Windows 7, would this help? (Am currently running Vista), or would I have to reinstall office as well?

19 more replies
Relevance 95.94%

I'm trying to install free software called audacity. I'm facing the error of "side by side configuration". I was facing this trouble in windows 7. Feeling frustrated, I updated to windows 10. Unfortunately, this error is still there and I am unable to install this free software. I also double checked and downloaded the exe again but the trouble is not gone. Please help

More replies
Relevance 95.94%

Hey Guys,

I have been trying to start an online game, but everytime i run it i get an error.
In the error it states that: the program cannot start because the side by side configuration is unvalid..

things i've tried and did not work:
- Reinstalling all microsoft visual ++
- Contact microsoft --> In the end they told me to install a program called reimage (cost me 25 bucks..?). Then i had to read on this forum that the software is actually installing malware on your PC? Still not sure if its true o rnot, but it was stuck on 80% in the end and it didnt finish even after 4 hours.

More important information: The PC is just new. Bought it off amazon a few days ago and it arrived today!

Is there anyone who can help me out? I cannot find a solution for this Side by Side error..


Thanks in advance!

More replies
Relevance 95.94%

This problem appears after the Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3198586) update.

After the update, several applications will not run - the error stating "its side-by-side configuration is incorrect" Deleting the update resolves the problem, but I can't seem to block the update.
Intel Core i7-2600 CPU @ 3.40GHz, 16.0 GB memory, 64-bit operating system

(Update doesn't seem to affect my Dell XPS 14 laptop)

How do I fix this issue?

More replies
Relevance 94.3%

Cannot open microsoft word. Says that there is a side by side error. Was working fine just the other day. Full time student and stay at home mom. Please help!

Answer:Microsoft Startet Error- Will not open side by side error

You might try using Windows' "System Restore" to roll Windows back to a previous state when your computer was functioning correctly. It allows you to undo system changes without affecting your personal files, such as e-mail, documents, or photos.

2 more replies
Relevance 93.48%

Hi ! I have a question.
How can I do that on surface pro 3 ?

Cuz I didn't find an option, how can I snap up for 3 or 4 apps side by side. Is it even possible in Windows 10 ? Thank you

Answer:Can W10 run more than 2 apps side by side (like W8.1)

Good question. I couldn't find a way either.

8 more replies
Relevance 92.25%

When i open my program this error message appears, when i download other program it appears again, i cannot use any program at the moment
Activation context generation failed for "C:\WINDOWS\SysWOW64\shell32.dll". Dependent Assembly Microsoft.Windows.Common-Controls,language="&#x2a;",processorArchitecture="&#x2a;",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"
could not be found. Please use sxstrace.exe for detailed diagnosis.

More replies
Relevance 92.25%

I have two operatings systems. Windows 7 on one drive and Windows 8 on the other. I have a program called PowerDirector 11 installed on the Windows 7 drive. I went to install the said program on the Windows 8 drive, (to be able to access it from either drive) and when I try to open or run the .exe, I get the error "The application has failed to start because the side-by-side configuration is incorrect. Please see the application event log for more details." Not much information in the application event log. Don't know if anyone else has had this problem with Windows 8? Thanks in advance for any kind of help or suggestions.

Answer:Side by Side configuration error

This might be of some use.
Message: The application has failed to start because its side-by-side configuration is incorrect. | Chief Architect Help Database

4 more replies
Relevance 92.25%

Today after recieving my new PC and GPU yesterday, Ive been getting this side by side error config error and I cannot launch any .exe files. When i booted up my PC, I installed flash and LoL (which includes C ++ files) and everything was working fine. The following morning I guess I hadnt booted my PC down properly so the black screen which prompts you to start windows normally popped up and I thought nothing of it. After starting up, I attempted to check my email via IE but it wouldnt start. It would open then immediately close as if sometging was force closing it. I attempted to start up LoL and I got the errors in the pics uploaded. Ive been researching all morning and Ive come across a couple threads where the support said the error was most likely due to Microsoft Visual and to uninstal then instal, but I cannot uninstal due to the error in the picture and I cannot instal either since I cannot access the internet. Any help would be highly appreciated. Im using my phone btw.
 

More replies
Relevance 92.25%

Everything on my laptop was working perfectly, then I had to update my Flash.
Afterwards, I tried to run Messenger and I keep getting the following error:
"The Application has failed to start because its side-by-side configuration is incorrect."
Other programs such as Photoshop and The Sims won't run either.

I've tried everything suggested: Uninstalling and re-installing the Microsoft Visual C++ Redistributable Packages, tried System Restore (which didn't work), tried to uninstall and reinstall Flash, etc. I'm not running AVG. Nothing seems to fix it.

Is there anything else I can do?
I use Windows 7, and it's all updated.

Thanks much.

Answer:Windows 7 Side-By-Side Error.

Have you check out this link? side-by-side

2 more replies
Relevance 92.25%

I have just used the VAIO recovery tool and I am using windows vista..
I'm not sure why but when I try to open some programs it says this:
'The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.'
Could someone please help me to fix this?

*
I have tried sfc/scannow
It says...
verification scan 98% complete.
Windows Resource Protection did not find any integrity violations

Answer:Side by side configuration error

Hello, unfortunately , you are the 3rd " side by side" person this week, this seems to be a tough one to " fix " The best and last resort after this one or two articles posting fixes for this issue was to just do a reinstall of the OS.
You say you used a recovery tool, was this from your console that came installed with your computer ? I am suggesting that you retry that tool, and lets hope it works this time, or you will have to do a back to factory default setting if your recovery tool has that for a last option fix. Post back results, there are tutorials here for a repair install if you have a dvd that came with computer . Let us know what you need to get it back up and running.
You could try the " scf /scannow " using command prompt , restart, run it again, then restart, If after the 3rd running of the SFC tool, if you still have not got it fixed , then the registry will have to be repaired by a reinstall . Post back your results.

8 more replies
Relevance 92.25%

I do not know anything about how to go about fixing this. I have read everything i can and i am still at a loss. Tried to download fixes for this but my downloads will not install, when i try to open them , the open button is grayed out. Also uninstalled my avg virus protector cause i read where this causes it. Then went to updates and updated. Restarted my computer, Still nothing helped. Can someone please tell me what to do? Thanks so much for any help i can get.
 

More replies
Relevance 92.25%

I am trying to install a new game i bought Microsoft flight simulator X i have tryed from installing all the Microsoft Visuals to installing a new copy of Vista and no luck so maybe someone will be able to help me

More replies
Relevance 92.25%

Hi all thanks in advance for any assistance.
 
Ok today I turned on my laptop and noticed that there was a windows update.  Once at the desktop, I attempted to open up Firefox and I received the following error, "The application has failed to start because its side-by-side configuration is incorrect.  Please see the application event log or use the command-line sxstrace.exe tool for more detail."
 
I did not like the bad English (..for more detail.) so I did not even try to run that executible.  However, I did do some digging around and it appears that its is some type of C++ runtime error.  That being said, I was going to uninstall and reinstall all the C++ programs, but anytime I attempt to uninstall anything, it says the windows installer is not available.  Odd.
 
I then began to try a system restore to a date prior to this morning, and although there was a restore point two days ago, it did not complete.  I went to refresh windows with the option to install a fresh copy but keep all my files, but again, it was unable to finish so there was nothing completed.
 
I hope this is enough information to troubleshoot, I am totally clueless because I cannot add or modify or uninstall anything. 
 
Thanks!

Answer:Side By Side Error - Win10

Not malware , moved to WIN 10

0 more replies
Relevance 92.25%

Hey. Yesterday I got a game someone I know (but not in contact with) programmed back in 2007 in C++.
When I try running it I get this error message:



I'm running Windows 7 Ultimate 32 bit.
I tried running it with compatibility settings of Windows XP, but when I did that I didn't get anything... no windows popped up, not even the error.
What can I do to fix this?

thank you.

Answer:Side-by-side error when trying to run a game.

side-by-side errors are usually associated with the Visual C++ Redistributables.

1. Re-install the following:Visual C++ 2005 Redistributable (x86)
Visual C++ 2008 Redistributable (x86)
Visual C++ 2010 Redistributable (x86)2. Install any updates to the programs in 1.
3. Re-install the game you were given if it has installation software for it. Otherwise, just try playing it again.

Best wishes. Let us know how it turns out.

9 more replies
Relevance 92.25%

I have a new Toshiba laptop ... with VistaX64. I receive an error message that reads "side by side configuration error" that doesn't allow me to continue. Any qick solutions to get rid of the problem? Thanks, Art

Answer:side by side configuration error

three things to try.

1. The "side-by-side" component is associated with the Vista Windows Resource
Protection (WRP). You may have a corrupted file in the SxS folder.

To resolve this issue, use the System File Checker tool (SFC.exe) to repair
these files.
To do this, follow these steps:

1. Open an elevated command prompt. To do this, click Start, click All
Programs, click Accessories, right-click Command Prompt, and then click Run
as administrator. If you are prompted for an administrator password or for a
confirmation, type the password, or click Allow/Continue.

2. Type the following command, and then press ENTER:
sfc /scannow
(The sfc /scannow command scans all protected system files and replaces
incorrect versions with correct Microsoft versions.)

This may take some time to run, so be patient.

2. Install the vcredist_x86.exe http://www.microsoft.com/downloads/d...displaylang=en

3. Install msxmli.msi http://www.microsoft.com/downloads/d...displaylang=en

or read some where this might work also, run UE3Redist file in the Binaries/Windows folder and it fixes the problem

keep us informed.

3 more replies
Relevance 92.25%

The cause if this error I believe is corruption of the Microsoft Visual C++ 2008 originally part of the install OS for Win 7. My reading on this error is that the only correction is to upgrade or reinstall the OS but I am unable to do so. The side by side error prevents any program from running, even IE from running.

When I attempt to use my install disk I created from the WIN 7 HP version I got from this site a few years back, but I get an error that the the existing version of the version I am attempting to repair does not match the DVD.

This side by side error has also left my mouse not functioning, so I'm struggling to use the keyboard in place of the mouse. I really need to repair my installation.

Please assist with comments. I really love this forum it has always been so informative and a great resource.

Please help thanks!!

Answer:Using original Win. 7. Now having Side by side error

Since you cannot work in Win7 you'll need to be able to boot into the Win7 System Recovery Options
to try to System Restore, run System File Checker, attempt to boot into Safe Mode, etc from Troubleshooting Windows 7 Failure to Start.

If you cannot access these via F8 at boot, and the disk will not work for you now, then can you burn a new System Repair Disk from another Win7 PC of the same bit version? If not see Step 1 in Clean Reinstall Windows 7 about how to get ahold of Win7 installation media since you may need that for repairs, or if necessary rescuiing your files to do a perfect Clean Reinstall Windows 7.

3 more replies
Relevance 92.25%

I am getting a side-by-side configuration error. I worked through a post by niemiro (Richard). Couldn't get it working, decided to reimage my machine to factory. Even that didn't fix it. After reimaging I reinstalled all Vista Updates and the redistributes listed with no luck.
In the thread I was following, that leaves me at uploading sfcdetails.txt and sxstrace.txt. I am only having this issue with one program, so I ran the same program 3 times. After looking at the log files, it appears my sfcdetails only found an error with the ini for the sidebar ( which microsoft said to ignore ) and I couldn't make heads or tails out of sxstrace.txt.
If anyone is available to help, it would be greatly appreciated.

Answer:Side-By-Side Configuration Error.

Hello oriontal, and welcome to the Vista Forums!

Very, very well done on uploading those logs. You have done them perfectly, and have done very, very well by yourself!

As you have worked out, the SFC log is absolutely fine. Nothing to do there.

However, the albeit slightly confusing SXS Trace log has shown to me what I think is the problem.

I think that this problem is actually with the one piece of software you are having a problem with (NoScrubs IRIS)

I think that your issue lies in a Conflict between Processor Specific and Processor Agnostic assembly references.

What this actually means in normal English is that you are running 64bit Windows as you say that you are, and NoScrubs IRIS asks to start x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_d08d7bba442a9b36.manifest. However, later on, it asks to start either x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_d08d7bba442a9b36.manifest or the 64bit equivalent when required. This starts two copies of the same component, and causes your error.

Don't worry too much about this explanation. However, it is only my best theory. I need to check that this guess of mine is correct. I think that this is actually an error with the NoScrubs IRIS software, and if required, we can contact IRIS. However, before we contact the developers of that software, I shall see if there is anything I can do to fix it, or prove that it is the developer's problem to solve.

Right, I need to take a copy of the Manifest fi... Read more

10 more replies
Relevance 92.25%

Hi I get the following error message when trying to load eBay Turbolister 2 program "side by side configuration error.I have looked at several old threads on this forum discussing possible fixes for this error but none actually work for me.

From event viewer the error message in more detail:

Log Name: Application
Source: SideBySide
Date: 29/09/2012 12:47:49
Event ID: 78
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Dave-Laptop
Description:
Activation context generation failed for "C:\Program Files\Windows Live\Messenger\msnmsgr.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest.
<Data>C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest</Data>
<Data>C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest</Data>

It looks like to me a conflict between Windows Live Messenger and Turbo Lister.Any ideas on how to fix it ?

As I said I ... Read more

Answer:Side by Side Configuration error

Hello David and welcome to the forums

Try installing this update:

Download: Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package ATL Security Update - Microsoft Download Center - Download Details

Make sure you pick the x86 version

Tom

5 more replies
Relevance 92.25%

hey i need help whit my game World of tanks i just get a error it say my side to side somthing is not right :S i have try to uninstall the c++ fil and install it agien an try uinsatll the gam and install it agien and agien and agien -.-' i suck to pc and i need HELP!!!

Answer:side by side error on a game -.-'

Your question is not really very clear is it? Your best bet is to ask for support from the publisher of the game.

2 more replies
Relevance 92.25%

Last thread I only wanted to know how to restore my comp to factory settings. Refer to my previous thread for Computer specifications. Anyway, while trying to install Fallout 3, I click on the fallout 3 launcher.exe and it says E:\ Side by side config is incorrect etc etc. What do? Oh and trying to install the C++ redistributables doesnt work since an error appears.

Answer:Side by Side Configuration Error

Start with a system file check.
Type sfc /scannow into an elevated command prompt and press enter.

5 more replies
Relevance 92.25%

Can anyone help with this error? Driving me nuts!Log Name: ApplicationSource: SideBySideDate: 12/02/2010 09:28:49Event ID: 33Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: HomeDescription:Activation context generation failed for "c:\program files (x86)\innovative solutions\drivermax\DPInst\ia64\dpinst.exe". Dependent Assembly Microsoft.Windows.Common-Controls,language="*",processorArchitecture="ia64",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0" could not be found. Please use sxstrace.exe for detailed diagnosis.Event Xml: Event xmlns="click here"> System> Provider Name="SideBySide" /> EventID Qualifiers="49409">33 /EventID> Level>2 /Level> Task>0 /Task> Keywords>0x80000000000000 /Keywords> TimeCreated SystemTime="2010-02-12T09:28:49.000000000Z" /> EventRecordID>6729 /EventRecordID> Channel>Application /Channel> Computer>Home /Computer> Security /> /System> EventData> Data>Microsoft.Windows.Common-Controls,language="&#x2a;",processorArchitecture="ia64",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0" /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data>c:\program files (x86)\innovative solutions\drivermax\DPInst\ia64\dpinst.exe /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> Data> /Data> /EventData> /Event>

Answer:Drivermax side by side error 33

Maybe remove Driver Max using Revo Uninstaller then download it again if you still use it.

6 more replies
Relevance 92.25%

Hi there,

I recently rebooted one day and I am now recieving errors like this on many programs (but not all)

"[App path]
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail."

Ive done some research, and it seems some can fix this, and some cant. Im hoping some one here can help me out. I already tried uninstalling, and reinstalling some of the problem apps, as well as every redistributable I can for the MSVC libraries. No luck.

I cant even open the event viewer from the control panel. How ever I was able to get open by doing a search for the application and launching one of the 4 or 5 ones I found. I was able to track it down to a very specific winsxs dir. They are all the same. How ever I have no idea how to repair or find that file or what I am supposed to do there.

Im fairly competent at computers, so if you need any further info from me I should be able to provide that.

OS: Vista64 Ultimate with SP2

-begging- Please help me. I dont want have to restore from a 4 month old backup (at least I have a backup haha)

Here are a couple of the general info errors in the event viewer.
----------------
Activation context generation failed for "C:\Program Files (x86)\Stardock\ObjectDockPlus2\Dock64.exe". Dependent Assembly Microsoft.VC90.DebugCRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32&qu... Read more

More replies
Relevance 92.25%

My youcam software has all of a sudden decided to stop working and I get the error message "your side by side configuration Is Incorrect, use the command line sxstrace.exe.
I tried the command line but I don't know how to use It. I have tried a system roll-back which did nothing. I can't even re/un-install youcam because It wont let me. I am running windows 7 premium on a Presario CQ57.
I checked the cam In device manager and all drivers are correct and the device Is working properly...somebody please help.

Answer:How can I fix a side by side configuration error?

Some help info here.

2 more replies
Relevance 92.25%

I am looking on the forums, and a lot of people have been having these errors. Unfortunately so am I, I was going through some of these and ran the Command Prompt sfc scan. The problem it came up with was...

"Windows Resource Preotection found corrupt files but ws unable to fix some of them.
Details are included in the CBS.Log"

Then when I try to open te CBS.Log access is denied... Does anyone know why windows hasnt figured out a way to prevent this sort of thing from happening yet?

Answer:Side-By-Side Configuration Error

it looks like a system incompatibility

1 more replies
Relevance 92.25%

Please Please Help ME...

I know computers fairly well, however I am new to 64 bit.
For some strange reason my Vista 64 started giving me side by side errors.
Every single 32 bit (Program files(x86)) app give me the error, while any 64 bit apps dont.
Trolling for a few hours I found the most common solution to be installing vcredist_x86 This file wont install it gives me the same error.
So I downloaded vcredist_x64, but this file is built with a 32 bit self extractor and results with the same error. I Tried uninstalling the Visual Studio 05 but it gives me a windows installer can not be accessed.

I have tried using a restore point, I have tried sfc /f and it made a log that I am unable to read.

Is there some trigger that can enable windows 32 bit installs to work and I can install vcredist_x86? Thanks.
 

Answer:Side By Side Error / Vista 64

bump
 

1 more replies
Relevance 92.25%

Hi,
Im pretty new here and Im sure theres other posts for this error. Ive been looking all over to solve this issue and nothing has worked so far and I dont know what to do anymore. So Im very greatfull for any help you could give me.

I get this error for several programs like AVG and Windows Live Mail. I tried installing the C++ Redistributable 2005, 2005 SP1, 2008, 2008 SP1, 2010, 2010 SP1 but that didnt help. I also tried the command sfc/scannow but that turned up nothing. I tried running sxstrace.exe but it just comes up for like half a second and then disappears into the background. I then had a look in the event log but to be honest I have no idea what Im looking at or what I should even look for so I will just paste the log for AVG here and hopefully someone can help.

By the way I have a HP Pavillion Laptop with Windows 7 Home Premium 64bit. Not sure what other information would be helpful.

I appreciate any help on this. I currently dont have an anti-virus program on my laptop so I really want to get this problem sorted. Dont really want to install windows agian.

So thanks again.
Sarah

Here the event log for avg:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">33</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords> ... Read more

Answer:side-by-side configuration error

Uninstall AVG it just loves to block the newer windows features for no apparent reason.
MSE is free and not perfect either but at least it doesn't have any known issues.
Virus, Spyware & Malware Protection | Microsoft Security Essentials
occasional side by side errors in the management console are practically normal, but they shouldn't be interfering with your use.

Side by side errors can also be caused by .net framework problems, so you can look into installing/reinstalling the .net framework stuff.

3 more replies
Relevance 92.25%

Hello,

I installed a new program and when I try to open I get error "The application failed to start because the side-by-side configuration is incorrect.

Activation context generation failed for "C:\Program Files\SerialIO.com\SerialMagic Pro\SerialMagicPro.exe". Dependent Assembly Microsoft.VC90.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",versio n="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.

I've downloaded the current .NET and Visual C++ Redistributable for Visual Studio 2013

Any help would be greatly appreciated. Thank you.

Answer:Side-by-side configuration error

Welcome to SevenForums,

Looks it needs:

Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)

Seems also that there's an order to respect when installing the different packages of Visual C++:

The application has failed to start because its side-by-side configuration is incorrect.

3 more replies
Relevance 92.25%

Hi I have the same message 'the application has failed to start because its side by side configuration is incorrect' I first got the message a few days ago after my wife downloaded 'citrix' so she could work from home!!!! Anyway I can open explorer, adobe etc. I have downloaded the C++ files on another computer (as I cant get online) and transferred them via usb drive but when I try to open the self extracting file I get the 'side by side' error message on this also. I'm stuck PLEASE HELP someone!! I have tried to remove the citrix thing but it says its already removed (but still shows on the list?) I have an SXS trace if this helps....it shows a syntax error (See below)

INFO: Manifest Definition Identity is Microsoft.Windows.IsolationAutomation.ProxyStub,processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",type="win32",version="1.0.6000.16386".
ERROR: Line 18: XML Syntax error.
ERROR: Activation Context generation failed.

Have also tried to recover to before my wifes instilation but it wont let me!
Can anyone help? How do I load those c++ patches/files when I cant even open them???? MILLIONS OF THANKS IN ANTICIPATION OF SOME BRAINBOX WHO WILL TELL ME HOW TO GET OUT OF THIS ONE! Kind regards Paul

More replies
Relevance 92.25%

hey guys ive been getting a side by side configuration error when i try to play dead space and when i try to use the new msn messenger. it all came all of the sudden i had the new messenger on my windows 7 beta and it was worknig fine put it on my vista 64 and down she went with this strange error. dead space i had played once (it was working fine on 32 bit) but after i went to start it again i got the same config error.

ive reinstalled all of the programs numerous times updated my visual c++ and so on but i dont no wat to do, this gives me no error number and ive never heard of it or seen it before.

please help me with this irritating problem

Answer:side by side configuration error

ok so i solved the problem and heres how to fix it incase anyone else encounters it.

go to the visual studio 2005 or 08 or watever your program requires folder in side your programs directory. in my case for dead space, it was under the "redistributables" folder in my game directory. reinstall the visual studio exe inside of there and it should all restart

the fact i didnt try that right away makes me feel a little dumb :P but i can see it being easy to overlook, especially when you look all over the internet and all the answers tell u to download ridiculous amounts of things or just reinstall your program

7 more replies
Relevance 92.25%

I was hoping someone could help with this, I'm getting an error when ever I try to open any MS Office apps which says "The application has failed to start because it's side-by-side configuration is incorrect. Please see the application even log for more detail"
After looking at the event log I find AESTFilters error: 1063 StartServiceDispatcher failed. I have no idea what that means and after doing some research I find that AEST is from a company called Andrea ST Filter Service which is to filter sound from the Mic, but I don't see how this is affecting all of the Office programs.
I've tried installing all of the drivers, OS and other application CD's that came from Dell but when I install the Office software it keeps giving me the error. Does anybody have any idea as to what this is or how to fix it?
 

Answer:Side-by-Side Configuration error

You might try a system restore to when it was working.
 

2 more replies
Relevance 92.25%

when i try to open any of the office 2010 applications i get the message: the application failed to start because the side by side configuration is incorrect. does anyone know how to correct this? (this pc runs win vista home premium sp2)i did an SFC/scannow and there was nothing to report. i did a sxstrace and have the following output: INFO: Parsing Manifest File C:\Program Files\Microsoft Office\Office14\WINWORD.EXE.
INFO: Manifest Definition Identity is winword,processorArchitecture="X86",type="win32",version="14.0.5123.5000".
INFO: Reference: Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",versio n="9.0.30729.1"
INFO: Resolving reference Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",versio n="9.0.30729.1".
INFO: Resolving reference for ProcessorArchitecture x86.
INFO: Resolving reference for culture Neutral.
INFO: Applying Binding Policy.
INFO: Find publisher policy at C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30304.0_none_7db1 e53ddcf5e248.manifest
INFO: No binding policy redirect found.
INFO: Begin assembly probing.
INFO: Did not find the assembly in WinSxS.
INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT\9.0.30729.1__1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.DLL.
INFO: Attempt to probe manifest at ... Read more

Answer:side by side configuration error

i thought i would take a break from trying to get office to work, so, i installed CallofDuty Black Ops on the computer and the problem went away. it seem that the game had visualc++ 2010 reddistributable and by installing that it fixed the problem. odd isnt it?

2 more replies
Relevance 90.61%

I have a complicated problem, at least for me. I get side by side configuration error when trying to access any program. I followed some post about uninstalling C++ programs but then i get the 1719 error. I then tried to download a few programs that were suggested but i get the side by side configuration error. Can anyone please help me??? I have some important documents that i didn't get a chance to back up and would like to be able to fix my laptop problems without having to wipe out my hard drive

Answer:side by side config. error and 1719 error

Hello,
If OS re-installation is an option to you, boot PC with Ubuntu Live CD, copy your data to Flash, external HDD or network PC, and make system re-installation.
side by side configuration error -> C/C++ run-time library conflict. Caused with some third party software or MS Visual Studio. If you use some kind of software i had mention try to re-install it.
Good lack.

1 more replies
Relevance 86.92%

"side-by-side configuration" error in Vista

I reviewed the forums and found a post that tells me how to fix this error, but I ran into a snag... The first step is to open an elevated command prompt. When I try to run that, I'm getting the same "side-by-side configuration" error that I'm trying to fix. Is there a way around running the sfc /scannow to fix this?

Ref:
Elevated Command Prompt
Side-By-Side Configuration is Incorrect

Answer:"side-by-side configuration" error - Vista

Welcome
Based upon my experience, I do not think that the SFC will work in a side by side problem. We do have one member, Niemiro, who is very astute in that area and has given advice to another member. Hopefully that will work for you.
side by side configuration

2 more replies
Relevance 86.92%

The application has failed to start because its side by side configuration is incorrect.
Hi everyone this is an error I'm getting with my new computer while trying to run a program. Is there something I can do to fix this?

More replies
Relevance 86.92%

T60p running WinXP - arrow keys "shift" screen side to side instead of moving cursor ; happens in Notes and Excel.  How do I reset to "normal"?

Answer:T60p - arrow keys "shift" screen side to side instead of moving cursor

Try to turn off scroll lock (key named "ScrLk") -gan

1 more replies
Relevance 86.92%

G'day everyone - I suspect this issue will be a tough one to get help with!

I've attached a screen-capture of a Microsoft Office Excel 2007 spreadsheet I'm working on at the moment. As you will be able to see on the screen-capture, I've marked the areas of interest and will explain here...

When I enter a name in this column (marked as '1'), I want the spreadsheet to check another column (marked as '2') to see if there is a match. If there is a match, I then want the spreadsheet to check the column marked as '3', and subtract that amount from the column marked as '4'. If there is no match between the column marked as '1' and the column marked as '2', I don't want anything to happen.

I hope that made sense, and if anyone can help me with a solution here, I would greatly appreciate it.
 

Answer:Solved: Calculating Side-By-Side Cells Dependant On Text Entries In Excel

8 more replies
Relevance 86.92%

When I insert a flash drive into one of the dead ports, initially the message pops up indicating that the computer recognizes something has been inserted into the port, but then it immediately disappears and the port is dead. I went to Device Manger-->Portable Devices and tried to fix one of the three dead ports. At some point (after I scanned for hardware changes, I think) it did show the drive letter, but it had a yellow triangular error-message  indicator. I right-clicked and selected Properties, and it said "This device cannot start (code 10)." Then the drive letter disappeared, though it has come back sporadically. I hope this is clear. Would appreciate any ideas. Thanks. Jane Doe 

Answer:E545--USB ports on left side of computer all died at once, but port on right side is still working

I also noticed this problem. Only the USB port nearest the rear is working. Even when I boot into the BIOS with a USB drive attached, only that port enumerates anything.

1 more replies
Relevance 86.92%

So recently, I received a blue screen of death. The error was something along the lines of:
page_fault_in_nonpaged_area

When it restarted, windows advised me to perform a system file check. So I left my computer for a bit, and when I came back it was already at the logon screen. However, when I logged on and started firefox, first thing I noticed was that all my bookmarks and some extensions had been wiped.
I then tried to start Microsoft Word but I received the following error:

&quot;The application has failed to start because its side-by-side configuration is incorrect&quot;;

I receive that error for most of my other programs.

When I tried to run event viewer, it says:

&quot;MMC could not create the snap-in&quot;

Please help. Is it possible to restore my applications without reinstalling them all?

Sysinfo Log:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3066 Mb
Graphics Card: ATI Mobility Radeon HD 3650 , 512 Mb
Hard Drives: C: Total - 289804 MB, Free - 64740 MB; D: Total - 15359 MB, Free - 9693 MB;
Motherboard: Dell Inc., 0F237N, A09, .2WZ222S.CN4864395K0725.
Antivirus: Microsoft Security Essentials, Updated and Enabled

EDIT: I ran SCF again. It said it detected corrupted files but when I restarted my computer, I am still unable to run most of my applica... Read more

Answer:Side-by-side configuration incorrect - application errors after System File Check

8 more replies