Computer Support Forum

SlowDownCPU Failed to load Hardware Monitor Driver

Question: SlowDownCPU Failed to load Hardware Monitor Driver

my friend already finished installing windows 7 ultimate..it works well but he always get the error message "SlowDownCPU Failed to load hardware monitor driver" each time when he start the computer.he already looked at his device manager but there is no indication that his driver is missing or error..but the most important thing, there is no problem with his computer n it functioning well..so anybdy can help me? what the message is all about? how to solve it..or if cant solve it,then how to turn off that error messge..he use desktop, n i not so sure about his computer specification..thnks

Relevance 100%
Preferred Solution: SlowDownCPU Failed to load Hardware Monitor Driver

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: SlowDownCPU Failed to load Hardware Monitor Driver

SlowDownCPU.exe Windows process - What is it?





Quote:
Important: Some malware camouflages themselves as SlowDownCPU.exe, particularly if they are located in c:\windows or c:\windows\system32 folder. Thus check the SlowDownCPU.exe process on your pc whether it is pest.


In your case, I don't think its a virus as stated above, as if the virus was doing anything its designed not to notify you about it.

First, open the start menu, and in the search box, type in

Folder Options

and press enter. Navigate to the 'View' tab. Check 'Show hidden files and folders'.Then tell him to navigate to C:\Windows and in the search box, type in 'SlowDownCPU.exe'. See what results come up. If there are none, there is no virus affecting system files. If there are results, we will guide you step by step.

EDIT: To stop the program starting up at boot, in the search box type

msconfig

and press 'Ctrl' + 'Shift' + 'Enter'. In the 'Startup' tab, uncheck anything to do with 'SlowDownCPU'.

5 more replies
Relevance 85.69%

I did reset my pc clean then when the reset if finish. I was gonna install msi hardware mobo then when I click auto play on the cd then I'm getting error ''Failed to load hardware monitor this program must run as administrator'' I'm new to windows 10

Answer:Failed to load hardware monitor

Judging from this techsupportforum.com post from 2011 (!) it appears that your graphics card may be the culprit. It doesn't look like a serious or system-threatening issue, if it's relevant, and it looks like uninstalling and reinstalling your graphics drivers may fix the problem. Check reliability monitor and see if it shows you anything interesting about that error message: it very well might!
HTH,
--Ed--

1 more replies
Relevance 64.78%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 64.78%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 64.78%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 64.78%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 64.78%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 64.37%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 64.37%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 64.37%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 64.37%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 64.37%

Ok I have done quite alot of searching on here and I have found out quite a few things I have exhausted every friggin resource imagineable. The only thing I have yet to try is the registry edit. Now I pretty much have that down I just have one simple question. When deleting the upper and lower filters...

While in the registry I have found the upper filters on the right hand side. The only problem there is - No lower filters.

Could this be a problem?

Also , do the upper/lower filters need to be removed from the Control set 001 and Control set 002 . Please get back to me ASAP.


Thanks.
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Anyone have even the slightest clue please let me know.
 

6 more replies
Relevance 64.37%

Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device. How can I fix this?

Any help is greatly appreciated,

thisismyuser
 

Answer:Solved: Windows cannot load the device driver for this hardware. The driver may be co

16 more replies
Relevance 64.37%

Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:

a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Go to the sound card makers web site and DN the latest XP drivers.
 

1 more replies
Relevance 64.37%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.

The driver is MAT****A DVD-RAM UJ-861H ATA Device

And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.

Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Please try the steps below:

1. Uninstall all third-party burning software, such as Nero and Roxio.

2. Perform a Clean Boot to test the result.

Clean Boot

========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.


Note: Please click Continue if the "User Account Control" window pops up.


b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.


Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".

Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.

If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.

If not, you may need to restore the system to its factory settings.

Hope it helps.

2 more replies
Relevance 64.37%

hey iv gotta western digital 3200aavs and my new hardware wizard wnt install it.. i tried driver detective.. but tht cnt identify my computer make and model ect.. so tht wnt help... and wen i connect my hdd via usb it blings so i know it cn see it but nufn in manage tab tht i access via rgt clickn my comp.. nufn in device manager so its not a matter off not bein allocated a drive letter.. i think my comp doesnt even regester it is a hdd!! any ideas?? or drivers?
 

More replies
Relevance 64.37%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this???
Any help is greatly appreciated
 

More replies
Relevance 64.37%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this??? I really need help to fix this
Any help is greatly appreciated
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

8 more replies
Relevance 63.96%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 63.96%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 63.96%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.96%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 63.96%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 63.96%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 63.96%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.96%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 63.96%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 62.73%

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

Answer:The driver \Driver\WUDFRd failed to load

you ever resolve this?

1 more replies
Relevance 62.32%

When i start my computer up I get the message Error 7323 1 or more network drivers failed to load.

Answer:Driver failed to load

If you are networked then you have trouble beyond my experience.If not, then which Windows are you running 95-XP?Try Google with error+7323 and see what turns up......and maybe my posting will encourage someone with wider knowledge to help you.

7 more replies
Relevance 62.32%

I turned off System Restore in order to run Superantispyware and when I tried to turn it back on ,,System Restore encountered an error to enable/disable one or more drivers failed to load. Restarting did not help. With some help by googling my problem i was lead to event manager and found errors at the time I tried to turn System Restore back on. "The following boot-start or system start driver failed to load" It listed nvatabus and nvraid. I have ran Superantispyware with System Restore off9because I cannot get it turned back on) but I have not tried it in safe mode. Should I try running it in safe mode or do you have any other suggestions or reasons why these drivers will not load? Thanks a bunch for any help you can give me with this!!!
 

More replies
Relevance 61.5%

Any suggestions on what to do about this?



Updating the driver didn't pan out, neither did uninstalling and rebooting (driver installation failed on reboot). Drive was working before. I know this can be solved; seen this before on somebody else's computer a year ago. On the other hand, maybe the driver isn't compat with 64bit Ultimate--but it was OK under 32bit Home Personal.

Answer:CD drive driver failed to load

Correction. The drive in question isn't a CD drive. It's a DVD drive.

20 more replies
Relevance 61.5%

I just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!   

Answer:The driver WUDFRd failed to load...

i have similar "issue" with my W520: Log Name:      SystemSource:        Microsoft-Windows-DriverFrameworks-UserModeDate:          29. 7. 2011 0:49:19Event ID:      10114Task Category: Startup of the UMDF reflectorLevel:         InformationKeywords:      (2)User:          SYSTEMComputer:      ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.    Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          29. 7. 2011 0:49:19Event ID:      219Task Category: (212)Level:         WarningKeywords:     User:          SYSTEMComputer:      ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3.  in my case it is related to external USB hard drive, which is displayed... Read more

9 more replies
Relevance 61.5%

 I'm getting a warning in the event log upon startup.  Windows 8.1 Pro.   This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error.  What is WUDFRd ?  All the information I can locate refers users to their OEM for a driver update..  Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          2/10/2015 11:24:03 AMEvent ID:      219Task Category: (212)Level:         WarningKeywords:     User:          MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />    <EventID>219</EventID>    <Version>0</Version>    <Level>3</Level>    <Task>212</Task>    <Opcode>0</Opcode>    <Keywords>0x800... Read more

Answer:The driver WUDFRd failed to load...

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

1 more replies
Relevance 61.5%

I keep getting the following message which I don't understand:

" Output Firewall
Output Firewall
Failed to load Output Firewall netwark operation driver.
Output Firewall functionality is limited: failed to load AFW.SYS driver."

I'm using the free Outpost Firewall which I downloaded from the Majorgeeks site.

syrk
 

Answer:message: failed to load AFW.SYS driver

Go here and see if this helps.
http://www.outpostfirewall.com/forum/showthread.php?t=22526
 

4 more replies
Relevance 61.5%

Has anybody been able to fix this warning message that came with W8? Every machine I have running W8.1 gets a couple of these warnings at boot time. This system ASRock Z77 OC Formula/3770K seems to get a triple dose of the warnings. I have tried the "Fix" of setting the startup to "Automatic" for "Windows Driver Foundation" but that had no effect. I do have a USB Keyboard and Mouse connected to the system but then who doesn't these days. I know it is just a warning message and probably has no effect on the system but.... I'm so close to having a clean event log at boot time. Any next step suggestions would be appreciated. Maybe W8.1.1 will fix?

Answer:Driver\WudRd Failed to Load....

I used to see this, but I don't any more. I don't remember what I did to fix it, it was a while back.
But I have the service set like this, so maybe that was it:

wudfsvc = Manual start

10 more replies
Relevance 61.5%

How can I fix this issue.... is the driver really bad? 

Answer:I did a hardware diagnostic UEFI test, driver failed. How c...

@LM0904 HDD is like a light bulb, it can die anytime specially when dealing with heat specially when playing games or doing high graphics works. Did the test produce a 24-charactor code ? If yes then sadly to say: Most of the time the 24 char failure id indicates the HDD is failing and need to be replaced. Is it still under warranry ? If Yes, please call HP for a replacement.In the US:    http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1or HP technical support: 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.  http://welcome.hp.com/country/w1/en/contact_us.html    Regards.

1 more replies
Relevance 61.09%

I have this previous problem... you need not read this for this current problem though
http://www.techspot.com/community/topics/bsod-upon-non-safe-mode-booting.212365/

I run on Windows 7 Home Premium 64-bit.

I want to install a newer update on my ATI graphics video driver. So I downloaded the one that suites mine which is AMD Catalyst Software Suite Omega (14.12) (for Radeon HD 6000 series) and during installation it says "Failed to load detect driver" and stops. Now I don't know what to do.

This is my first time downloading this so there are no programs like this in my "currently installed programs". I tried uninstalling the driver in the Device Manager but it just reinstalls back(when I scan for hardware changes). Thanks for the reply!
 

Answer:AMD Catalyst Failed to load driver detection

Is this a desktop PC or a laptop?
 

1 more replies
Relevance 61.09%

the motherboard is an msi 760Gm-E51
I went to msi website and downloaded the drivers for the motherboard because the system was crashing. I thought it was probably caused but the graphic driver but when I uninstall the driver and tried to run the ccc install again I still get failed to load detection driver. I tried using ddu to totally uninstall the current graphic driver but that didnt work.
I dont know what else to try to get this computer working

Any help will be great thanks in advance.
 

Answer:ccc failed to load detection driver with new install of win 7

Did you try the Factory install disks.? I only downloaded a few drivers once & it messed up my Win7 PC. I am sure you will get help from one of our great Tech Gurus on this forum.
 

7 more replies
Relevance 61.09%

"OMCI system driver failed to load on start up." Source: Service Control Manager.

I have had this error message appear repeatedly over the past 2 months or so.

More recently the following also fail to load:
PCIIde
ViaIde

Windows (XP SP2) also often fails to start, sometime failing after the Windows logo screen has run, sometimes it doesn't get that far. Hitting the power and re-trying works...

Any advice appreciated.
 

Answer:System driver OMCI failed to load...

Kservice
and
PC tools Anti-Virus Engine (now uninstalled)

Also have frequently hung on starting.

Another recent error:
"The Messenger Sharing Folders USN Journal Reader service service failed to start:
...The service did not respond to the start or control request in a timely fashion. "

Another recent error
"An error was detected on device \Device\Harddisk0\D during a paging operation."

and

"The device, \Device\Scsi\JRAID1, did not respond within the timeout period."
 

3 more replies
Relevance 61.09%

I tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!

Answer:Driver WUDFRd failed to load - Event ID 219

It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):

3 more replies
Relevance 60.68%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 60.27%

Hi all.

My pc has been hanging randomly and I have to use the power button to shut down/restart.

I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.

I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.

A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.

Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).

Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.

I've run the following tests so far here

I have no driver issues showing up in Device Manager, so that looks ok.

Please advise. Thank you.

Answer:The following system start driver(s) failed to load: mbmiodrvr

I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.

Do you have that application installed, or some other temperature / fan speed monitoring sw?

Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.

Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)

If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup

Bill

5 more replies
Relevance 60.27%

Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:

Windows failed to load because a critical system driver is missing or corrupt.

Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys

Can anyone shed some light on how to resolve this?

Thanks,

Evan

Answer:Windows failed to load b/c driver is missing or corrupt

: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various

Go to website of that company and try to download driver.

You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.

Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.

1 more replies
Relevance 60.27%

I am attaching a screen shot of the Kernel-PnP Event 219 that suggests that a device driver is failing to load at start up. I have been receiving this message for about three weeks and can't relate it to any particular event on my computer. I have trawled the net and had a look at Device Manager but I can't ascertain which driver is not loading and presumably needs to be updated.

I downloaded some software called "Driver Manager" and that has identified 28 out of date drivers. To correct the problem I have to pay a subscription that I can not really afford. Can someone help me identify which driver is causing the problem please?

Answer:Kernel-PnP Event ID 219 Driver failed to load problem.

Judesman, I don't recommend paying a subscription as you can get the drivers yourself. That seems to be a plug n play device, look ath the user action section in this link Kernel ID 219

9 more replies
Relevance 60.27%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 60.27%

Hello,

Can someone please help me find out what driver or service 'ksop' is? Or, how to fix it?

I've been troubleshooting my Windows 7 laptop to try and find the cause of random, sudden shutdowns and a bunch of 7026 and 7001 errors. This 'ksop' error pops up every time I reboot.

I tried clean-booting, SFC, CHKDSK, etc, but I can't narrow down a service as the culprit. I tried Googling 'ksop' but I couldn't find anything that explained what it was, or a record of anyone else asking about this issue.

Anyone out there have any idea?

Here's the event info:

Log Name: System
Source: Service Control Manager
Date: 3/22/2015 12:59:37 AM
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
The following boot-start or system-start driver(s) failed to load:
ksop

System
- Provider
[Name] Service Control Manager"
[Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}"
[EventSourceName] Service Control Manager
- EventID 7026
Qualifiers 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[SystemTime] 2015-03-22T07:59:37.826903400Z" />
EventRecordID 220852
Correlation
- Execution
[ProcessID] 548
[ThreadID] 620
Channel System
Computer *********
Securit... Read more

Answer:Event ID 7026: 'ksop' driver failed to load?

So far all I've been able to find out is that 'KSop' is a pool tag, and it's associated with something related to Windows 7. I still don't know what driver it's for, how to find out, or how to fix.

If anyone has any ideas, clues, or suggestions, it would be greatly appreciated. Please, I'm at my wit's end!

3 more replies
Relevance 60.27%

I have seen this event several times in the Event Viewer program. Is it something that I should be concerned?

Answer:The following bootstart or systemstart driver failed to load: Rawdisk3

Do you have a portable drive or flash stick plugged in during this time?

Please post back a screenshot of Disk Management - Post a Screen Capture Image
showing fully scrolled, after this error next appears and without touching anything else.

2 more replies
Relevance 60.27%

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

Answer:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 60.27%

Hello all.

After getting my FF7 set from a friend a couple weeks ago, nostalgia kicked in and I got his FF8 copy also but I'm having problems with it. I also have no problem playing FF7.

Installing it goes along with no problems till the end, where it says "Failed to load custom driver" and it goes to desktop. I try to start the game and same thing. I got the 1.2 patch but am unable to install EAX because again it says failed to load custom driver. What is going on?

Windows XP Home Edition
Pentium 4 2.2 Gz
256 RAM
Intel 82845G/GL/GE/PE/GV Graphics Controller
 

Answer:Final Fantasy 8 (PC) Failed To Load Custom Driver

13 more replies
Relevance 60.27%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Relevance 59.86%

Hi i was wondering if any body could help! My CD drive has all of a sudden stopped working, not sure why but when i go to the devices properties the following message appears:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Has anybody got any solutions, thanks.

My device is a 'Optiarc DVD RW AD-5170A ATA', and im currently running WINDOWS VISTA ULTIMATE 32bit.

THANKS.
 

Answer:Windows cannot load the device driver for this hardware.(Code 39)

Ive sorted the problem but i will leave this solution incase any body else needs help with same problem.
Step 1: Start Registry Editor
Click Start, click Run, type regedit, and then click OK. Registry Editor starts.
Step 2: Delete the UpperFilters registry entry
1. In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
2. Expand SYSTEM, and then expand CurrentControlSet.
3. Expand Control, and then expand Class.
4. Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
5. In the right pane (topic area), click UpperFilters.

Note An UpperFilters.bak registry entry may also appear. To delete the UpperFilters registry entry, you must click UpperFilters and not UpperFilters.bak.
6. On the Edit menu, click Delete.
7. When you receive the following message, click Yes to confirm the deletion of the UpperFilters registry entry:
Are you sure you want to delete this value?
The UpperFilters registry entry is removed from the {4D36E965-E325-11CE-BFC1-08002BE10318} registry subkey.

Note Do not exit Registry Editor. You must have this program for the next step.
Step 3: Delete the LowerFilters registry entry
1. In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
2. Expand SYSTEM, and then expand CurrentControlSet.
3. Expand Control, and then expand Class.
4. Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
5. In the right pane (topic area), click LowerFilters.

Note An LowerFilters.bak registry entry may also appear. T... Read more

1 more replies
Relevance 59.86%

I too am having this problem, but it is with Windows XP CD ROM LTN526s. I uninstalled the original CD ROM unit and put this one (ltn526s) in and got the same message.
 

Answer:Windows cannot load the device driver for this hardware. (code 39) -- On XP!

Hi

Moved your post to its own thread as the other thread was dealing with Windows Vista and that OS can have different routes to fixing a problem that may not work on yours or cause more issues,


But what you can try is in Device Manager right click the CDROM and choose Uninstall, then reboot and see if the drivers are picked up. If that doesnt work then follow this How to fix missing DVD/CD drives not showing up in windows explorer (easy options and pre-done registry files are at bottom on page, download, unzip and double click to merge with registry) then reboot.
 

3 more replies
Relevance 59.86%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Windows Critical update and now sadly I have all USB drivers with yellow triangle type sign..tried uninstalling drivers etc..still the same. Search web but found nothing that I can handle ..anyone help please..I have 3 USB drives I cannot use..I se them in device manger etc but nothing I can do to them.. I see only my c: drive and my cd/dvd drive indicated as good. I updated USB drivers and am desperate for help..My backups etc are on the USB drives..restore does not see m to work. I read about filters and conflicts..can anyone guide me here..

Answer:Urgent Please:Windows cannot load the device driver for hardware.

Have you tried a system restore to a restore point before this happened?

9 more replies
Relevance 59.86%

File: \windows\system32\drivers\ltoxvyo.sys

status: 0xc0000225

Vista Home Premium.

need some help on how i can get this machine functional again.

i do have the vista installation disc unfortunately due to the short length of the SATA connectors from the power supply they simply do not reach the ROM drive while being connected to the hard drive at the same time.

if anyone needs any more info just ask.
help would be much appreciated,

Answer:(Failed to load because of a critical system driver is missing, or corrupt)

Hello and welcome to the forum...

Can you tell me if you can get to your main desktop if not have you tried to boot in safe mode. Here's how to boot in safe mode just in case.

Safe Mode

But please let me know if you can get to your desktop.

Tom

3 more replies
Relevance 59.86%

hi, basically I have an Acer Aspire 5738Z notebook it was going a bit slow recentley so I decided to wip it clean and start again, before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot. I thought this was my chance to wipe the whole think clean (using Alt+F10, acre Erecovery management) so I started doin it and after 17 long hours of the progress being stuck on 82% I decided it was time to turn of the computer and try it again, which I did and the whole thing was completed fine but when it restarted it came up with the message "windows failed to load a critical driver is missing or corrupt" and attempted to restart and try again only to be greeted with the same message again!

I have no windows 7 DVD but after a few hours of scratching my head I realized that my brother has the exact same laptop so I made a system repair disk from his laptop to use on mine... only to find that "startup repair cannot fix this computer automatically" and now it boots up but gets stuck on the windows logo screen and I've currently been there for almost 3 hours!

Can anyone help me please the laptops only a year old and I can't really afford the cost to get it fixed professionaly any help would be greatky appreciated... Thanks in advance guys!

Answer:windows failed to load critcal driver is missing or corrupt...help!

Bump!

6 more replies
Relevance 59.45%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 59.45%

So, My son got the BSOD where he couldn't select the language, so I reformatted and reinstalled a clean version of win 10.

Now, under device manager I get 2 heading of HIGH DEFINITION AUDIO CONTROLLER with both having a yellow exclamation point. When I click on, the details say

"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39){Bad File}The attributes of the specified mapping file for a section of memory cannot be read.

I have uninstalled both of them and re-started the computer, tried the audio controller troubleshooter, copied the 3 drivers from a working computer and still cannot get rid of the yellow exclamation points.

Just about to throw the computer out the back door and tell him to read a book.

Any ideas?

Answer:windows cannot load the device driver for this hardware code 39 audio

Hey,

And welcome to Tenforums,

Since the version you reinstalled is a fresh install there is only one thing that could cause a driver to fail which is indeed the required installer, if you could list the name and the current version of the driver installed I could take a look and find you the newest driver which should be working, also it might be a good idea to perform a windows update check just incase windows did not update your driver yet, it might fix it by itself. Also performing an uninstall of a driver is often the way to go but it might be another option to completely disable the sound controller and remove any remaining installation files which usually removes after a restart.

more replies
Relevance 59.45%

Hey all -
Well I have lurked here a few time but now I have an issue that Google nor Microsoft can explain how to fix right off.

So I got my new Toshiba laptop 13 days ago and Tuesday night I was ripping alot of my music onto it and the CD/DVD drive stopped reading the disks. So i turned it off and tride again the next morning and nothing so now I'm looking for help.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

but i have not found how to fix it in vista anywhere just xp.... Help?

Thanks
 

Answer:Windows cannot load the device driver for this hardware. (code 39) -- On VISTA!

oh and to add on ts a Toshiba Satellite L355D-S7825
 

8 more replies
Relevance 59.04%

Hi everybody,

This is my first post on this forum. I've recently come across a problem with my computer. I'm running Windows Vista 32 bit. I shut the computer down one day, and the next day turning it on I came across this problem.

File: \Windows\System32\Drivers\nqgbwc.sys

Status: 0xc0000225

Info: Windows failed to load because a critical system driver is missing, or corrupt.

I have no clue what this means. It said insert windows installation disc and repair computer. I did this, self repair found nothing. I then tried system restore and it could not initialize which is a pain in the ass. My last resort is to reinstall windows vista but I think I'm going to lose everything.

If anyone has any advice or suggestions it would be greatly appreciated.

Thank you,
Kevin

Answer:Windows failed to load because a critical system driver is missing, or corrupt.

First see if you can boot into Safemode without it giving you that error. If you can, first try searching for that driver to see if its even in your system32 folder.

I recently just checked my computer and it is not in mine by default, which means its a file relating to a third party program/app that has been installed on your machine. If you can figure out what the abbreviation for NQGBWC is from the list of installed applications on your computer, then you can isolate which program on startup is causing the failure on booting windows due to the missing system file.

As you may have already tried, i cannot simply google search nqgbwc.sys as it gives me just THIS post only. If you cannot find the problem, then the only thing possible from there is to reinstall your OS but of course BACK UP EVERYTHING IMPORTANT FIRST.

2 more replies
Relevance 59.04%

the following boot-start or system driver(s) failed to load: SRTSP SRTSPX
Anyone were seen that problem?
Laptop is a compaq and running windows Vistahome Premium
cheers

Answer:the following boot-start or system driver(s) failed to load: SRTSP SRTSPX

Ohh sorry.. got that from the event log..

3 more replies
Relevance 59.04%

windows \system32\drivers\ msisadrv.sys
 
Status: 0x000000f
 
would like to repair this without reloading if possible
 
thanks
Brett

Answer:windows failed to load because a critical system driver is missing or corrupt

I have a few questions:
1. Do you have a repair disc?
2. If not, does the PC have a recovery partition?
3. Can you boot from a live CD (such as Puppy Linux)?
4. What were you doing before the problem started?

7 more replies
Relevance 59.04%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 59.04%

Hi,

I have a Qosmio X770 and its blue screening occasioanly but I cannot find out why as the Crash dump driver fails to load on boot.

I gave googled and tried recreating page file, deleteing, it rebooting, recreating again, also setting dedicate dumpfile in the registry and still every boot I get event ID 45

The system could not sucessfully load the crash dump driver.

I have ran SFC and all files are fine

Windows 7 64 Bit, Main OS

anyone any ideas?

Thanks

Answer:Qosmio X770 - BSOD and Crash Dump Driver Failed to load

Found an user who had the same issue with the dump file and this could be solved by deleting paging file, then resetting it and after that seems to have solved the problem...

8 more replies
Relevance 58.63%

-- Note: --
This issue is still NOT resolved, please help if you can.
I summed up everything in this first post (that happened meanwhile) so you can quickly catch up with the thread!
Hi,

We have a new monitor but I'm unable to use it's native resolution.
We're using it with a notebook (Intel GMA x3100 GPU) and it seems the graphics driver has no clue which resolutions are supported.

There's a monitor driver available url=http://www.lg.com/hu/termektamogatas/lg-M2232D]here[/url] (you can download it to examine it even if you don't own this product)
When I run the monitor driver setup, it wants me to select the display driver output. (There are two of them)
I selected the one I had the monitor connected (It said Non-PNP display). It had no effect so I installed it on the other one too but still no effect.
What should I do?

I did a system restore to try again (as there is no uninstaller for the driver)
Now it is doing the same, it says install successful, but just then I get another popup saying install failed...
Updates to sum up the things we've already discussed:I tried installing the monitor driver, both normally and manually in Device Manager. No effect.
I tried unchecking "Hide modes that this monitor can't display" -> Many resolutions appear, but most of the supported ones are missing, even the native resolution is missing (1920x1080)
Graphics driver is up to date
I tried THIS (from Intel's website). It displayed different resolutions by defa... Read more

Answer:Monitor driver - install failed

to change your screen res, go to:
Control Panel\All Control Panel Items\Display\Screen Resolution
--->
Advance setting--->Monitor--->uncheck Hide modes that this monitor cannot display...
then change your res to the desired one

6 more replies
Relevance 58.22%

File: \windows\system32\drivers\ksecdd.sys

Status: 0xc00000e9

Info: windows failed to load because a critical system driver is missing or corrupt.

Any help is appreciated. The computer will not even turn on or get past this point.
 

Answer:Info: windows failed to load because a critical system driver is missing or corrupt.

if your computer is telling you that window failed to load, that means you need to format the system and install in window on it, and you must do it before i damage your hard drive.
prince
 

5 more replies
Relevance 57.4%

I'm running fully updated W530 with Windows 10 Anniversary update; I have the latest graphics drivers for the W530 from Lenovo installed and have my BIOS set to use Nvidia Optimus.   When I plug a monitor into the VGA port it doesn't work and I get the following pop-up message from Windows: 'Display driver failed to start; using Microsoft Basic Display Driver instead. Check windows update for a new display driver. ' After this message there is only 1 monitor shown in the windows display settings.   I then updated the Nvidia display driver using device manager and rebooted, but this problem still remains.  I've tried changing the BIOS to use only the dedicated Nvidia GPU, but this doesn't work either.  I tried installing Nvidia drivers for this card from their website, but the install crashes my computer to a black screen and forced me to do a hard reset into safe mode so I could re-install the Lenovo driver package.   What do I need to do to get my external VGA monitor working in Windows 10?

More replies
Relevance 57.4%

Hi, hope someone can help. This seems like a simple issue, but I've been to two other forums and gotten no response.

W7 runs fine, but I'm looking for help with an annoyance which I believe is a driver issue. My monitor (Philips 202p73) doesn't offer a driver for W7. I have an XP driver for it, but, not surprisingly, when I tried to point W7 to the XP driver, it wouldn't take. However, W7 somehow has found a driver for the monitor. It shows all the correct resolutions and refresh rates and uses the correct name. My vid card drivers are up to date.

The annoyance is that every time I logon, first the generic non-PNP driver loads and THEN the Philips driver loads. As a result, my screen goes blank and comes back on just as it would if you were changing the resolution. This happens every time I logon.

I've tired deleting the drivers, but they restore back the same way. How can I make W7 use the Philips driver only and not load the generic non-PNP driver first?

Thanks.

Answer:Monitor Driver won't load the first time

  
Quote: Originally Posted by petepc


Hi, hope someone can help. This seems like a simple issue, but I've been to two other forums and gotten no response.

W7 runs fine, but I'm looking for help with an annoyance which I believe is a driver issue. My monitor (Philips 202p73) doesn't offer a driver for W7. I have an XP driver for it, but, not surprisingly, when I tried to point W7 to the XP driver, it wouldn't take. However, W7 somehow has found a driver for the monitor. It shows all the correct resolutions and refresh rates and uses the correct name. My vid card drivers are up to date.

The annoyance is that every time I logon, first the generic non-PNP driver loads and THEN the Philips driver loads. As a result, my screen goes blank and comes back on just as it would if you were changing the resolution. This happens every time I logon.

I've tired deleting the drivers, but they restore back the same way. How can I make W7 use the Philips driver only and not load the generic non-PNP driver first?

Thanks.


You may be able to force win 7 to use the XP driver by installing it in compatibility mode. to do that right click the installer>properties>compatibility>check XP.

If that doesnt work try to find a vista driver and do the same thing. That usually works

Ken

3 more replies
Relevance 54.12%

I checked through the Event log in Administrator tools.
I got the following error: The following boot-start or system-start driver(s) failed to load: BANTExt

What is it?

I googled BANTExt and found out it's BelArc Advisor. Is it true?

How do I stop this error?

Answer:The following boot-start or system-start driver(s) failed to load: BANTExt

Yes, BANText.sys is the Belarc Advisor system driver file.It is started automatically from a Run, RunOnce, RunServices, or RunServicesOnce entry in the registry everytime Windows starts.To prevent the error you would need to find and remove that entry in the registry.

11 more replies
Relevance 54.12%

Hi all,
I have a problem with Vista Business.Naimly, every time I start the computer and look up into the computer menadgement/event viewer/administrative events it has an error msg:
The following boot-start or system-start driver(s) failed to load: i8042prt



-
System










-
Provider







[ Name]
Service Control Manager






[ Guid]
{555908D1-A6D7-4695-8E1E-26931D2012F4}






[ EventSourceName]
Service Control Manager









-
EventID
7026







[ Qualifiers]
49152










Version
0










Level
2










Task
0










Opcode
0










Keywords
0x80000000000000









-
TimeCreated







[ SystemTime]
2007-08-27T15:56:02.000Z










EventRecordID
26753










Correlation









-
Execution







[ ProcessID]
0






[ ThreadID]
0





















-
EventData






param1
i8042prt
I think this is regarding my video card (Gygabyte Nvidia 8600GTS) drivers?!But the card works pretty normally and the drivers are up to date.
Anyway there are also a lot of other error & warninig msgs regarding the volsnap and security update installation files.Maybe this due to the situation that I have installed both Vista and XP and there is a common problem with Vista working with XP/other and that is NO RESTORE POINTS... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Problem Solution The following boot-start or system-start driver(s) failed to load: i8042prt 1.Go to Start > Run and put regedit.exe  and click  Ok 2.Navigator to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters in Registry Editor 3.Add a new REG_DWORD "Headless " and set the value to 1 4.Reboot the server. Regards,

18 more replies
Relevance 54.12%

I have system error: The following boot-start or system-start driver(s) failed to load: tvtumon My computer has all pathes and latest rivers installed. Why this driver die?

More replies
Relevance 54.12%

Guys, I'm running Windows XP and recently when I turn on my PC it makes a single beeb and then seems to run OK.

Tonight, I was running Firefox and the system seemed to slow, before becoming completely unresponsive. I had Task Manager open at the time, however when I tried to shut Firefox down the PC started bleeping like mad and I was forced to do a hard shut down.

I waited about 1 minute and then rebooted and immedietly went into the Error log and found the following entry:

"The following boot-start or system-start driver(s) failed to load: StarOpen"

I tried Googling a fix with no luck and I can't find StarOpen in the Services, Apps or Program files. Nor could I find it listed in the Device Manager or the Boot-start list in msconfig.

Can anyone tell me how to fix this?
 

More replies
Relevance 54.12%

Everytime I start Windows, I see the following error in Event Viewer:
 
The following boot-start or system-start driver(s) failed to load: 
VBoxNetAdp

Answer:The following boot-start or system-start driver(s) failed to load: VBoxNetAdp

Do you have Virtual Box or Avast antivirus installed?

1 more replies
Relevance 54.12%

Each time I boot my computer, I receive the follow message in the Event Viewer System Log File:

The following boot-start or system-start driver(s) failed to load:
KmxAMRT

Here is the information that I see when I sent it to the Microsoft Support and Help Center

Product:Windows Operating SystemID:7026Source:Service Control ManagerVersion:5.2Symbolic Name:EVENT_BOOT_SYSTEM_DRIVERS_FAILEDMessage:The following boot-start or system-start driver(s) failed to load: %1

What I believe is happening is that all though I uninsulated CA's Anti virus package and installed Microsoft's Security Essentials, not all the CA software was removed.

Help in getting rid of this problem would be greatly appreciated.

Best regards,

Larry

Answer:[SOLVED] The following boot-start or system-start driver(s) failed to load:

Hi

See this document:
Uninstall failed

Select the correct CA product you had, download the Removal script and run.
Hopefully this will remove the CA Suite from your PC.

2 more replies
Relevance 54.12%

Ok I will copy and paste the message:

The following boot-start or system-start driver(s) failed to load:
aswSP
spldr
Wanarpv6

I found it in vista event viewer. I am currently running vista in safe mode and dont really want to restart the pc. This is my first post on these forums and they look great. SO please help!

MY PC Specs:
2 (1x1) gb RAM
1.6Ghz CEL E1200 Dual Core CPU
Vista Ultimate
CD Driver
256MB GFX Card
Nothing else you really need to know

Answer:VIsta The following boot-start or system-start driver(s) failed to load:

Could be spyware.

I would run a Trendmicro free scan.

3 more replies
Relevance 54.12%

Sorry if this has already been answered/wrong place. I looked at Google but thought I double check here (since the solutions via Google seem to be refering to a different OS to mine)

First of: Windows Vista, SP2, 64 bit.

Now sometimes (and not now since I am writing this) my Keyboard/Mouse just stops working. It freezes completely and I am unable to use it and am hence required to restart the computer. This happens at random occasions but it usually involves opening some program or what not (I noticed a prominent pattern that the mouse/keyboard freezes whenever I go to speedtest.com measure my speed and then once the download speed bar is finished and upload is about to begin my computer freezes).

I had a look at my event viewer and noticed this:

The following boot-start or system-start driver(s) failed to load:
i8042prt

Now I am not sure whether this appears at the start and then once I run a program or do something (like go on speedtest.com) the commuter then freezes (i.e. my mouse/keyboard is non-responsive) or the error message comes up after my computer freezes but any help in fixing this mouse/keyboard freezing would be very grateful.

The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg informa... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Originally Posted by Petze


The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg information, is it possible that I wont ever get access to my keyboard/mouse? My worry is that I might change some value so that I will have no way of getting to the computer with the keyboard/mouse (I am not good with bios) and would not be able to get help on the internet since I can't connect!



It is bad idea

DWORD Start may have following values

0 -boot ,1 -system ,2- auto ,3 -demand, 4 -disabled. Surly if you'll set to 4 you lose access to keyboard and mouse.Don't modify anything.Find folder C:\Windows\Minidump pack it and attache to post.If Minidump folder is empty use verifier tool to diagnose wrong drivers read here:http://www.vistax64.com/973966-post8.html

33 more replies
Relevance 54.12%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 54.12%

The following boot-start or system-start driver(s) failed to load: i8042prt Any ideas?  Thanks in advance.  - Larry  -----------------------------------------------------------Lenovo 3000 H210 Desktop, Windows Vista Home Premium 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

More replies
Relevance 54.12%

I can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.

More replies
Relevance 54.12%

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

More replies
Relevance 54.12%

I am trying to resolve two problems one is on in my event viewer only; and first started on the 26/11/09 it is as follows:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 06/12/2009
Time: 09:04:34
User: N/A
Computer: USER-B3A7BA2F25
Description:
The following boot-start or system-start driver(s) failed to load:
ViaIde

At that time I had installed some Windows updates, problems often seem to start after Windows updates!.

The second problem also appears in the even viewer, but I am aware it has happened during start up. The system can not find or load the user profile,
This happens at random and can be several days or weeks apart
event viewer details are:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1511
Date: 03/12/2009
Time: 20:19:22
User: USER-B3A7BA2F25\Tony
Computer: USER-B3A7BA2F25
Description:
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.

With the first problem ViaIde failed to load; I have followed Microsoft link, Googled it, and not really seen much information that will help. I have run the scf/scannow without success. Any ideas and help would be appreciated

The second problem of profile loading, I had associated with the Kaspersky internet security suite. They asked me to remove some conflicting software and the problem did stop, but returned a few... Read more

Answer:boot-start or system-start driver(s) failed to load:

Hi, It's all a little disappointing, it would seem no one here has an answer either.

The user profile problem does for the time being seems to have stopped, since the last Windows update, but I am not holding my breath as this happend before and then it retunes again.

I am left with just the "The following boot-start or system-start driver(s) failed to load: ViaIde, problem to resolve........if anyone does have a clue ?

regards Tmax
 

8 more replies
Relevance 54.12%

hi,

I am currently making a device specific module for microsoft MPIO. I have successfully installed the mpio and my own DSM. However, during start-up, an error message comes out saying: "At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details."

When I checked the event log, it says:

The following boot-start or system-start driver failed to load: TrailNavi

TrailNavi is the name of the device specific module that i am making. I am currently using a 32bit server with Windows 2003 OS.

I am trying to test my DSM, but could not do so because the driver can't be loaded..

Any help would be great..
 

Answer:The following boot-start or system-start driver(s) failed to load

bump
 

1 more replies
Relevance 54.12%

Of late when I am powering on my PC, the power LED on the cabinet blinks but the HDD LED doesn't. The monitor displays, NO SIGNAL.
Then when I restart the PC and when it finally boots, I go to the Event Viewer and find this entry

The following boot-start or system-start driver(s) failed to load: atc

My PC Config:
ASUS M5A78L-M/USB3 MoBo
AMD FX 6100 CPU
Corsair Vengeance 8 Gigs RAM
Crucial MX 100 256 GB SSD
500+160 Seagate HDDs
ATI Radeon HD5450 GPU

Kindly advise what does the above error mean and how do I resolve it

Thanks

More replies
Relevance 54.12%

I'm working with a Dell Dimension C521 PC. It came with a PCI-Express video card which apparently has failed, yet the motherboard itself has on-board video. The system will boot using this video output (as opposed to the card which produced nothing) but when it finally gets to windows the auto-detect driver routine kicks in and begins to detect the video card, prompting the user to "Continue Anyway" to finish installing unsigned drivers. Unfortunately this event takes place in front of the installation of the USB keyboard and mouse (times like these I wish it had PS/2 ). Anyway, whether I boot up into Safe Mode or normal a prompt comes up about installing drivers for the on-board chipset. I can't interact with it because the driver install routine for the keyboard/mouse becomes interrupted.
 

Answer:Dell Dimension C521; USB key/mouse driver load interrupted by video card driver load

Bump. I've been thinking... the only way I think this can be fixed is if I boot from a Linux CD or something similar and delete a particular set of drivers for this video card. It can't prompt you to install any drivers if they don't exist, right? But I don't know where to go to delete such files and prevent them from automatically trying to install themselves. Any ideas?
 

2 more replies
Relevance 53.71%

I recently had to install a new battery for my computer. After doing so I started having this problem and receiving the following Error from the "Service Control Manager" Event ID:7026   The following Boot-Start or System-Start driver(s)
failed to load: ppfd_vt_1_10_0_24    Param 1. The issues I am having are; Unable to completely "SHUT DOWN" unless I press the power button, this is after I have already selected the "shut down" option in the Start menu. Never
had to press the power button to power off my computer. Also, at "START-UP", I get as far as a black screen with a white flashing cursor in upper left-hand corner. At this point I am stuck, nothing takes me out of this state unless I press the "POWER"
button to shut-down. In order to start-up & Boot, I disconnect AC Adapter, remove battery, wait about 20 seconds, re-install battery, power adapter, and push power button. Now my computer is all good. Can anyone help me with this, I've researched for 2
weeks and am no where. Thanks for any help. My computer is quite old, 2010 Sept., but I'm hoping that I don't have to purchase a new one...(I'm a lil cheap) lol

More replies
Relevance 53.71%

Guys,

Please review this issue for me as I need the answer for my references. This sometimes applies to setting up a new Internet Connection in Win 95 or 98. Let's say, that you have set up a new Internet Connection with new ISP path settings. Your asked to do a system restart, you do a restart and all is well until you get to a second screen in the bios that either says:

"Ethernet Adaptor failed to load press any key to retry" OR

"Ethernet driver failed to load press any key to retry"

I can't remember what the message says, but it's one or the other! after the word "Driver" or "Adaptor" it gives the driver name. You CAN however still get into Windows by pressing any key....But, the message will come up until you remove the driver.

I vaguely remember that to remove this message you go under Device Manager, under "Networking" and remove a device that has an exclamation point under it (This removes the network driver that doesn't load) But what does this message mean and how does it happen to get there in the first place? I know that it happens when setting up a new Internet Connection sometimes, but I need to know the exact steps for removing the driver because I might be changing ISP's in the future, and need to know what to do if this message comes up again! Thanks!

Jack
 

Answer:What Does "Ethernet Driver Failed To Load" Mean?

i think the message means that the driver is corrupted/not responding

why it happens, i dont know, but if u are installing a separate software to connect to your isp, this software might be the problem

the proper way of removing the driver is to delete it from device manager
 

1 more replies
Relevance 52.48%

I am currently using windows 7 ultimate x64. I was in the middle of a process restoring my computer to a few days back and suddenly it froze. i did a power shut down and when i turned it back on, i wasn't able to get back into windows. i was brought to startup repair and it gave me errors. 'Boot manager failed to find OS loader." there was options for restoring, but all my restore points were gone. recovery wasn't able to find image backup. "startup repair cannot repair this computer automatically" so i did some research before i came here. i was told to go into safe mode to restore, but whenever i enter safe mode, startup repair would take over and shows the same errors,also i read a tutorial using a repair disc ( made a copy of it on someone elses ultimate x64 computer) and i get the 0x00000e9 error if i boot from disc. what can i do? as of now i dont have the installation disc with me. i wont be able to get hold of it until tomorrow. theres a lot of important files in that hard drive and i really cant lose any. any help would be greatly appreciated. thanks.

Answer:Failed to Find OS Load. Startup Repair FAILED

If you can't use a system repair disk, then you could simply reinstall Windows on the same hard drive. You don't need to format the hard drive during installation, just select your main hard drive and install, that way you can preserve your files. The files will be in "Windows.Old" after installation in your "Local Disk".

Also, make sure your repair CD is 64-bit, like your system. Try to access your BIOS, by pressing the "Delete" key; it's different for various mktherboards, and select your CD-ROM to be first to boot. Might help, I'm not sure. If it helps, we'll start from there.

You'll want to select "Command Prompt" from the repair disk, we'll need it.

6 more replies
Relevance 51.66%

I have a Yiynova tablet monitor and its been working fine for about a month. I recently tried to download the beta version of a NVIDIA GeForce update (bad idea) and had to reinstall a previous version. After that, things started to go south for my tablet.

I uninstalled and reinstalled the tablet driver, and tried to plug it in a different USB port and it came up with the same message.

Is there a step that I'm missing?

I have dual screen setup, and that's working fine, but the driver that senses the pen just isn't installing, even though I installed the driver program.

I appreciate any ideas on how to fix this.

Answer:Yiynova tablet monitor "device driver failed to install"

The problem wasn't solved, but I believed I narrowed down the problem. The driver doesn't seem to fully install.

1 more replies
Relevance 51.66%

Started receiving this message a few months ago???? I read another similar thread that said to search hidden folders and files so here's my results:(mag_hook.dll ----- C:\WINDOWS\system32)(narrhook.dll ----- C:\WINDOWS\system32)(NeroSearchTrayHook.dll----C:\Program Files\Common Files\Ahead\Lib)(QOEHook.dll ---- C:\Program Files\eTrust Internet Security Suite\etrust Anti-Spam\QSP-5.1.18.0)(CAHook.dll ---- C:\Program Files\CA\SharedComponents\PPRT\bin)(mslhook.dll ---- C:\Program Files\Common Files\InstallShield\Ebgube\6\Intel 32) Any suggestions as to how to stop the error message? Thanks, Jill

More replies
Relevance 51.66%

failed to load library 'd3d9.dll

Answer:can not load skype with this error failed to load library 'd

failed to load library 'd3d9.dll

3 more replies
Relevance 50.84%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

Answer:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

8 more replies
Relevance 49.2%

I was tried to update Bios to 1.12 but not successed..It always came out this message " Driver Loading Failed. The Utility cannot proceed."..I tried to update under safe mode, still not work..I tried to use Winflash, it came out "Cannot open new BIOS file"..There's only one method that I didn't try is that burn a ISO CD and connect to External CDROM.. but I don't have External CDROM..The reason that I update Bios is that I want to install Toolbox; otherwise, I won't take this risk..For futhermore information click following link..http://forums.lenovo.com/t5/ThinkVantage-Technologies/This-version-of-Lenovo-ThinkVantage-Toolboox-i...

Answer:X120e update BIOS failed "Driver Loading Failed. The Utility cannot proceed"

Sounds like something wonky with your Windows install. I'd avoid doing a BIOS update through such an install.

4 more replies