Computer Support Forum

Driver for Canon LBP-1120 Lasershot on W7 x64

Question: Driver for Canon LBP-1120 Lasershot on W7 x64

Hi,

I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
Dave
The Netherlands

Relevance 100%
Preferred Solution: Driver for Canon LBP-1120 Lasershot on W7 x64

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

9 more replies
Relevance 84.46%

I am still trying to install my Canon printer, the computer finds it with P & P but sticks it in unspecified,
in USB properties (hardware) there is a driver under other devices and with USB printer support, but the printer isn't showing in "device & printers" I cant use "add printer" as I don't have the disk and it is not listed under windows update, I'm past it, can someone help me
should read Canon LBP 1120

Answer:installing Canon Lasershot LPB120

Install the driver. Can be found here Laser Shot LBP1120 - Canon Europe

1 more replies
Relevance 75.44%
Question: Canon LBP 1120

Please help me. I have vista 64 but i can't find any driver for Canon LBP 1120. Help me because i don't want to buy another printer.

Answer:Canon LBP 1120

Hi EugeneBek,

Welcome to the forum.

Sorry, the only drivers I can find for the Canon LBP 1120 are the 32 bit ones. There are no 64 bit ones for this printer yet from what I see.

http://software.canon-europe.com/products/0000524.asp

Shawn

1 more replies
Relevance 74.62%

New PC with Vista Home Premium (32 bit) and both the Cannon LBP-1120 laser printer and the LiDE50 scanner refuse to work.Downloaded both software from Cannon and the printer is there supposedly working OK in Device Manager. Scanner says it isn't working.Print from Word gets Error - printing under Status which then disappears. Cannon say they will ring back next week as they don't know why! Any thoughts? Thanks

Answer:Canon LBP-1120 and Vista

Have you made the printer the default printer for Vista , I think that when you have word loaded the printing properties default to Microsoft Office Document Image Writer and not your installed printer . Are you using driver 7.1.3.3 for the scanner , if not click here for that version , this is from the Australian Canon site , this is where I got the drivers for my N670u which works well under Vista . Ashley

4 more replies
Relevance 74.62%

Hi all,

has anyone successfully managed to get a Canon LBP-1120 working with Windows 8?

As you might know, Canon does not provide any Win-8 drivers, but only 32-bit drivers.

I've tried playing back and forth with XP/Vista/Win-7 drivers and running the in "compatibility mode" without any success.

Googling gave me several links about this issue, but nothing that solves my problem.

Please help!

Thanks in advance!
 

Answer:Canon LBP-1120 on Windows 8?

Eilenach said:





Hi all,

has anyone successfully managed to get a Canon LBP-1120 working with Windows 8?

As you might know, Canon does not provide any Win-8 drivers, but only 32-bit drivers.

I've tried playing back and forth with XP/Vista/Win-7 drivers and running the in "compatibility mode" without any success.

Googling gave me several links about this issue, but nothing that solves my problem.

Please help!

Thanks in advance!Click to expand...

According to this page, the Canon support may in fact be included with the Windows 8 OS. Follow the instructions there.
 

2 more replies
Relevance 74.62%

I have installed the LBP-1120 printer but somehow contrived to get Japanese voice messages when printing. How do I change these to English? Thanks

Answer:Canon LBP-1120 language

I don't know the printer but on the toolbar look for Options, Preferences, Tools or similar wording and see if it can be changed there.

4 more replies
Relevance 74.62%

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

Answer:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

8 more replies
Relevance 73.8%

I am having trouble printing to our canon printer via a usb cable on my new XP machine. The print goes to the printer then a data protection error or something like that comes up.I've tried updating the print drivers, but the machine still doesn't want to know. But when I connect my hp 959c again via the usb everything works fine. I know the obvious answer is to forget about the canon and just use the hp, but the canon is quicker and cheaper to run.

More replies
Relevance 73.8%

i got this canon lbp-1120, it was wworking fine, i did an upgrade to WinXpSp2 now the printer wont install,when i plug it in,the system detect it but i get this massage found new hardware printer installtion cannot be complated. Anybody with a solution to this problem,i 've downloaded the latest drivers and upgrade but it still wont work.
 

More replies
Relevance 63.55%

Does anyone know of anwhere other then HP's website where I can download the printer driver for the Deskjet 1120 (OS Windows 98) as I can't seem to download it from there. Have managed to download other HP printer drivers & software OK. Just getting error message when trying to D/L.

Answer:HP 1120 Printer Driver

Managed to find one on driverguide.com. The search facility wasnt much use though

1 more replies
Relevance 63.14%

Need a driver for 600-1120 I need ACPI\HPQ4000 specifically... is this driver included in bundled drivers? Any help appreciated

Answer:Need ACPI\Hpq4000 driver for 600-1120

 Hi, ACPI\HPQ4000\4&15DD6BE&0  Original Fintek eHome Transceiver Driver ftp://ftp.hp.com/pub/softlib/software11/COL35151/pv-87085-1/sp49795.exe http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-600-Desktop-PC-series/4079692/model/41...

2 more replies
Relevance 61.5%

I recently updated to the Windwos 10 Fall Creators update (Build 1709, 16299.125), and as soon as I updated, the graphics driver failed and switched to the Microsoft Basic Display Adapter. I tried updating and rolling back the driver without success. My driver right now is at the latest version (10.18.10.4358). I already tried fixing this issue with Microsoft support but they couldn't find any solutions. Microsoft Support Link: https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/intel-hd-graphics-not-working-... 

More replies
Relevance 50.43%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

Answer:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Relevance 50.43%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

Answer:Window 7 64 bit cannot install driver sotware(canon printer driver)

Disconnect and turn your printer off, Uninstall all the printer software, drivers and reboot. Disable any antivirus/antimalware software you may be running and then start the Canon installer again, Do Not Connect the printer until the software asks you to connect the printer and then turn it on. The installer will then search for the printer and will tell you if it finds it. Any antiviirus/firewall or anti-malware software running might block the driver installation so be sure you have turned all of that stuff off

8 more replies
Relevance 46.33%

I am using W& RC and cannot get my Canon Lide 80 scanner to work.I`ve tied loading new drivers but get a message that I need a WIA driver.Canon don`t seem to be that helpfull when questioned about W7 drivers.Would the retail version of W7 have this problem solved?It seems that although W7 has a large amount of drivers in it, it doen`t seem that helpful if I can`t load original software such as Canon scan toolbox.When I used Windows 7 upgrade advisor it showed no problems with my peripherals.Can anyone explain please.I don`t want to get the retail version if I`m going to have problems.

Answer:Canon WIA driver for W7

found this that says what to do for the message you are gettingclick here

3 more replies
Relevance 46.33%

I have a Canon LBP 660 printer for which I need a driver.  This model is not included in Canon's list of downloadable drivers.  Can anyone point me at a source?

Answer:Driver for canon LBP-660

You didn't mention what OS your're running. Maybe this will help:http://software.canon-europe.com/Printers/Laser_Beam_Printers/LBP660542.aspGood luck.  

1 more replies
Relevance 46.33%
Question: Canon Driver

It seems like this is an impossible task.

I work at a non-profit (read: no budget) and our 3 computers crashed. We got a new laptop donated and everything is installed on it. However, we cannot find a driver for our copier:

Canon GP 200

Which supports Windows 7 Home Premium 64 bit

HELP!

We cannot afford a new printer and everything is set aside from this... anyone?

Answer:Canon Driver

Hi sunnyslope, Welcome to the forums, I'm afraid doing a quick search failed to find a driver for the printer after 2005 and that was for win2000/XP Canon U.S.A. : Support & Drivers : GP200 you may be able to try to install these drivers in compatibility mode

9 more replies
Relevance 46.33%

Have just got new computer running XP Home Edition.Printer is a Canon LBP-660. Downloaded driver from Canon website but it will not load as the error message states that I need to be using Windows 95 or 98. Yet it worked on my old computer running XP pro. Is there another compatible driver I could use? Any help greatly appreciated.
 

Answer:Canon LBP-660 driver

Have you tried the Windows 2000 drivers: http://software.canon-europe.com/so...ndows_nt_40__2000_r112s4954.asp?model=LBP-660
 

1 more replies
Relevance 46.33%

Hi, I just purchased a Flex 3-1120 with Windows 10 preinstalled via Lenovo.com. When I try to use the Lenovo OKR to restore the system back to the orginal state, it takes to the Windows 10 recovery options. Is this correct? Will the Windows 10 receovery option restore everything including the Lenovo preinstalled programs/apps? Thanks for your assistance!

Answer:Flex 3-1120 Windows 10 OKR

Iam not sure if it will restore lenovo pre installed apps but it will restore windows 10 completely......  RegardsKamal



Ask any questions or Doubts,Always ready to help.... Dont forget to click kudos if i have helped you

1 more replies
Relevance 46.33%

Fixed: Bug fixes
 

More replies
Relevance 46.33%

I just got this Lenovo and when setting up, I am pretty sure I downloaded and installed the free Windows 10 upgrade.  In my program information, I only see Windows 8.1 as being installed.  When I go to microsoft browser, it says Windows 10.  How do I find product key for Windows 10.  I tried following directions on lenovo help site but it did not help. thanks for any advice.

More replies
Relevance 45.92%

I have a Canon i250 usb inkjet printer, and wish to upgrade the driver for it. I have downloaded the latest from the canon website. where is the driver installed as the printer is not shown in system properties device manager.I have been having trouble with this printer not printing B/W in draft mode on plain paper and thought a new driver may solve the problem.regards

Answer:Canon printer driver

With my Epson Printer i have this option..Start-Control panel-Printers and Faxes-right click on Epson icon, Properties on the epson under Advanced tab you have the option New Driver which opens the New Driver Instillation Wizard.Hope this helps :)

2 more replies
Relevance 45.92%

Hi, can anyone give me a straightforward link to download the driver for canonMP492 combo printer for W7 please. Had many attempts myself but seem to get sent here, there and everywhere and get anything other that than what I require.

Answer:driver for canon MP492 for W7

Here,number 59 I think.

2 more replies
Relevance 45.92%

hi therecan any one help me here I have looked up and down for my driver cd rom for my scanner to no avail has any one got a link for a canoscan FB63OU driver please .thanks

Answer:canon scanner driver

You don't say what operating system you are running but is this any good click here

3 more replies
Relevance 45.92%
Question: canon i320 driver

i have a canon i320 printer....i lost the disk to install it....anywhere ican dl the driver
 

Answer:canon i320 driver

http://www.usa.canon.com/consumer/controller?act=SupportDetailAct&fcategoryid=232&modelid=8045
 

2 more replies
Relevance 45.92%

Does anyone know where I can download a driver for a Canon MPC190 Multifunction?
 

Answer:Canon MPC190 Driver

Driver,http://software.canon-europe.com/software/0011732.asp?model=

xp patch,http://software.canon-europe.com/software/0020843.asp?model=
 

1 more replies
Relevance 45.92%
Question: Canon MP160 driver

Hello, I have Toshiba Satillite laptop with 32 bit Vista. I tried to uninstall my Canon MP160 printer driver and install it again. It said I have a printer drive installed. I cannot find a printer in Control Panel. So, can someone tell where I can find the driver and delete it?
Thanks, alanrr

Answer:Canon MP160 driver

Hi welcome to the forum.
I am unsure why you cannot find. I press Sart > search box type printer > press enter , I have a full list of things
that are on the computer re: printers.
Control panel > I have printer, on others it's devices & printers.
If it is not under category in control panel, I would assume not installed properly.
Sorry, maybe more info is you have, what's on screen, error messages etc?

4 more replies
Relevance 45.92%

Need driver for canon LBP 1210 windows 7 x 64bit. Any ideas?

Answer:Canon LBP 1210 driver

Try here:

Laser Shot LBP-1210

4 more replies
Relevance 45.92%

Canon does not have drivers for Picma MP450 Vista. Does anyone know where I can get drivers for the MP450 product for Vista? Thanks, Charles

More replies
Relevance 45.92%

Hello! I hope this is where this goes, If not I apologize.
I just got a Canon PIXMA Mg5422 and I have already set it up with my router and iPhone and it works just fine. I put the disk in my laptop (HP G60, Windows 7) and everything is fine. I'm a little confused though, the current installation step I'm at is a "Software Installation list". The software that ARE checked is MP drivers, On screen Manual, My printer, My image Garden, Quick Menu, Adobe RGB (1999), and Easy web-print EX. The bottom software is ''XPS driver'' and it is not checked...Do I need to check this or not? I currently don't own a camera to go with the printer (such as a canon) but I do hope to be buying a camera in a few months (not sure on brand). I'm not really sure what XPS driver means. Please help! Thanks.
 

Answer:XPS driver Canon MG5422

No, you don't need it, its optional.

You can read up more on it on Wikipedia: http://en.wikipedia.org/wiki/XML_Paper_Specification
 

1 more replies
Relevance 45.92%

Having spent the best part of yesterday, and most of this afternoon, trying to get the driver of my brandnew Canon iP4500 printer to be accepted by the computer, by that I mean it is on the HD,but no matter how I try to get get it to work it won't, and I have tried; I.E: shut down AVG-ZoneAlarm, I even turned off my RouterModem, and even uninstalled Spywareblaster-Spybot all to no avail, down loaded then driver from Canons web site put that on but that made no difference, it still was not accepted. The new hardware manager goes through the motions, picks up the driver from the CD opens it, runs it, when its' finished the window with the 2 folders comes on,but before it can start, another window pops up saying it can't find the appropriate file.Tried going the add a printer route, that at least aknowledged that the printer was there,got to the last window, then that even came up can't find the file.I can only think that its' something some where on my PC that is blocking it, but what!!!, so if any one can suggest trying some thing else it would be as usual very much appreciated.Its' frustrating to have abrand new printer lying here waiting to be kick started.Regards, DP.

Answer:Canon iP4500 Driver?

Sorry to ask the obvious, but if I recall right you install the printer driver before connecting the printer. Have you done this?

10 more replies
Relevance 45.92%

Just bought a new computer with windows 7, can't get Canon multipass F50 driver to download. Apparently there is an incompatability issue between the two...Who's at fault here and what can I do about it? I need the printer and can't afford a new one and I've given away the old computer. Help!
Does Canon need to update their drivers or can Windows 7 OS come to my rescue?
Should I expect an update from Canon?
Thanks for whatever help you can give.
Dave

Answer:canon multipass f50 driver

Well it would seem they haven't offered support since Xp. The only choice you have is to try and install the XP driver in compatibility mode.Support - Color Bubble Jet Printer - Copier - Scanner - Fax - MultiPASS F50 - Canon USA Consumer Products To install in compatibility mode follow this Compatibility Mode . Fabe

2 more replies
Relevance 45.92%

running xp, have canon 850i connected via usb2, can't find printer properties anywhere, want to check for the latest current driver to see if i need to update. hope someone knows what i mean, the printer is not in device manager nor can i find the propertied in control panal, any help appreciated.

Answer:canon device driver

Does the printer work? If so, then it maybe running a windows driver, try going to the canon website and installing the latest driver... did the printer come with any software? have you installed this?.. if you have, does it not appear in the 'Start...Programmes' list?

5 more replies
Relevance 45.92%

I am looking for a XP driver for the Canon BJC5100 printer. I have seen on the canon site that they don't exist, but I didn't know if someone might have one by now. Some say that a 2000 driver will work with some tweaking but I don't know how to tweak it. Any help would be appreciated. Thanks.
 

Answer:Canon BJC5100 driver

Hi gobblerhuntr,
Try here !
 

1 more replies
Relevance 45.92%

looking for driver update for Canon 20D
 

Answer:Driver update for Canon 20D?

Hi

Not knowing what Windows version your using and what was your last Canon 20D driver update, here is main downloads page for the Canon 20D, just choose your OS from the dropdown list then the Lauguage and click Submit and any available drivers will list, can search down the full list but easier to choose OS and Language as it narrows it down a bit.

http://software.canon-europe.com/products/0010131.asp
 

2 more replies
Relevance 45.92%

I just got an HP with Vista x64 and Canon do not offer the right driver for the MF 3110 yet. Anyone know of a fix for this problem. We have 2 of those printers in the office and i cant use them. Thank you...

More replies
Relevance 45.92%

How can I get a driver for my canon LIDe 80 scanner for it to work on Vista? logrin

Answer:Canon Driver download

click here=

1 more replies
Relevance 45.92%

I have a Canon BJC 4400 bubble jet printer that was given to me. I downloaded a driver for it (version 3.97) but when I try to install the driver a window comes up entitled "Extraction Progress" and extraction completes and then a window comes up saying "Canon Information", "all items were successfully extracted." I click OK and the next window that comes up is entitled "Readme-Notepad" in which information about things such as installation but when I close that window nothing else happens, it goes back to my desktop. I'm using Windows Me. I downloaded a driver for the same printer for my laptop which has Windows XP and it installs without any problem. All steps for adding a printer were followed. Version3.97 is for Windows 3.1, 95, 98, and Me. Any help would be appreciated.
 

Answer:canon bjc printer driver

is it just extracted into a temp file and then waiting for you to install
post the link to the driver page and I will have a look
 

1 more replies
Relevance 45.92%

Have been trying to download the latest driver formy canoscan D1250U2 scanner Via cannonUK websiteand cannon Europe site but in spite of filling in all the details asked for all it does is to refer me back to the "main page". Any suggestions please. Meshuga.

Answer:Downloading canon driver

Get the driver from elsewhere - Driver guide for example!

3 more replies
Relevance 45.92%

A friend of mine has a Canon Multipass L90 printer/scanner/copier/fax machine.She wants to upgrade her operating system to Win XP, but can't find a driver for the Multipass.Anyone seen/heard of one?TIAChris

Answer:Driver for a Canon Mutipass L90

Looks like shes struggling, theres a few sites that say theres an NT driver that might work.Chris

9 more replies
Relevance 45.92%

i need driver for canon lbp-660forwin7

Answer:driver for canon lbp-660 forwin7

Canon only offer drivers for Windows 3.x / W9x / ME & 2000, it must be a very old printer !Googling is quicker than waiting for an answer....

5 more replies
Relevance 45.92%

I can't find the driver for the Canon MF8000 printer on Windows 8.1? Can someone help me?

Answer:Canon MF8000 Driver?

Don the Canon site is a bloody nightmare I just need to know where you are because searching is asking me for country etc etc and I saw you results were in some language I don't know.

9 more replies
Relevance 45.92%
Relevance 45.92%

I have a canon imageclass mpc190, i need the driver for this printer i have been to canon site but no luck there.Does any one have a driver for this model or know where to get one downloaded.

Answer:canon mpc190 driver

The drivers for the 190 are on many sites. The cannnon site in Autralia is one of many.http://www.canon.com.au/products/Click on support and go to driver downloads.

1 more replies
Relevance 45.92%

Hi,

I uninstalled my Canon iP3000 software, and then when I tried to reinstall it, it got to a stage in the setup process where it asks you to connect the printer to the PC. But where the PC would normally detect a new hardware device, it didn't. My guess is that the driver wasn't uninstalled, although when I look under drivers, I can't see anything under Canon. (I have Windows XP pro). The installation cannot proceed without this, and the computer doesn't detect the printer.

I had originally installed the printer software with Ashampoo, so I used that uninstaller to uninstall, but it seems even that didn't detect everything.

Could anyone offer me some advice?

Thanks!

Peter
 

Answer:Canon driver problem

13 more replies
Relevance 45.92%

i have win xp and my printer does not work with it. I have tried many drivers but none work. I tried downloading the windows 2000 driver and then running bjc the printer angel but my trail for printer angel had expired. Where can I find a working windows xp dirver for canon bjc 5100?

thanks
 

Answer:Canon bjc 5100 driver

XP doesn't list it in it's normal set of drivers? Odd!! Try a Canon driver for a printer that is similar to yours in the defalt set of XP drivers. If you don't see an XP driver on Canon's web site they don't have one.
 

2 more replies
Relevance 45.92%

I notice that there are a number of posting in regards 64-bit drivers for Canon printers but no other posting for the Canon LBP 5100. I purchased this printer around 12 months ago and simply love it, mainly due to the auto duplex that make printing out PDF such an easy task.

I intend building a new computer in the coming months and have more or less decided on installing Windows 7 Home Premium or Pro (Retail) 64-bit. The only major problem I can see with the 64-bit is with the Canon Printer LBP 5100, the canon website shows a 32-bit driver for Vista but no 64-bit versions. Contacting Canon NZ I received a reply stating that as far as they can ascertain there will be no 64-bit drivers for this printer unless Canon Japan decides different.

Questions please: I have been told that Windows 7 will come with a driver for the Canon LBP 5100 but can't find any information in regards this, so my question is does Windows 7 come with a driver for this printer?
If it does will the auto duplex still work?

Anyone knows how to contact Canon Japan (in English) about a 64-bit driver for this printer?

Had anyone that uses this printer come across a work around for a 64-bit driver for this printer.

Answer:Canon LBP 5100 64-bit Driver

Their is a similar post above yours for the lpb 5000. And from their question I can ascertain that windows 7 doesn't come with a driver for your printer since they can't be theirs to work. Even if W& did cone with a driver it would be a printer driver (just basic ) and most likely wouldn't include the applications needed for duplex. Sorry but after 7 is released on the 22 nd maybe with enough inquiries cannon will get with the program. But from their point of view i assume they would just rather sell you a newer model printer. Fabe

9 more replies
Relevance 45.92%

Hi sorry for probably another printer issue but this one is a little odd.

I have a canon pixma ip3000 and when i installed it on my W7 64, windows update found it and made it work...great

Problem is my dad is having the same problem with his newer canon pixma ip4500 except windows update isnt finding a driver for it.

The canon site only has this add on driver for some maintenance utillity but doesnt actually have the main driver ! so how can we get this newer model working ?

Thanks for any advice

Answer:Canon driver not found with W7 ?

Download the Vista driver from Canon. You may have to install it in Compatability Mode.
If you are using Win 7 64bit get the Vista 64bit driver. Win 7 32bit get the Vista 32bit driver.

Here is the tutorial. Option One or Two.
Compatibility Mode

There are no Windows 7 drivers.

Mike

9 more replies
Relevance 45.92%

Hi!

I have one problem. I have Windows 7 RC (build 7100, 64-bit) as my primary (only) OS. Everything works just fine but i have one "little" problem.
I have Canon Lide 60 scanner and its not working completely. I can scan winth CanoScan Toolbox but i can?t access scanner settings under control panel. And i can?t import/scan directly through Photoshop.
I just receive error message about WIA driver.

Here is screen:

I get this message when i am trying to double click on icon in control panel or in photoshop.

Any idea?

BTW: in Vista 64-bit this scanner works good.

Answer:Canon Lide 60 - WIA driver

Look in your old Windows VISTA/Windows directory for a file named twain_32.dll and copy it to your Windows 7/Windows directory.

Worked for me so I wish you same luck.

9 more replies
Relevance 45.92%

anyone tell me where to find one that is easy to install please

Answer:driver for canon bjc250 on win/98

Try here:click here4th one down on the list.

3 more replies
Relevance 45.92%

In desperate need of dos driver for Canon BJ-4100 or dos driver for BJ-200/200e.299ex.Anyone know of web site where these can be downloaded (Canon do not have them listed nor do windrivers.com)RMB

Answer:Dos driver for Canon 4100

click here it may have what you require?

2 more replies
Relevance 45.92%

Does anyone know where I can get a driver for a Canon BJC 5100 printer.
I seems that Canon themselves do not and will not supply the driver for this printer to operate in Windows XP.
 

Answer:Need a Driver for Canon BJC 5100

7 more replies
Relevance 45.92%

Please, I am trying to reconnect my HP laptop Pavilion dm4-1165dx Notebook wirelessly to a Canon multifunction 8350cdn printer. I am having trouble with the printer's software detecting any device to my laptop, my printer. My question, is there a driver that would enable for these two devices, my printer and laptop, to be able to function together once again, wirelessly? Thanks. :yum

fyi...I've already tried downloading the newest software from Canon and still no good.
 

Answer:Canon and hp laptop driver?

Hi

What Windows version are you using?

There would be no other drivers you need apart from the Canon drivers you already have, I would check the printers menu and double check that WiFi is on.
 

1 more replies
Relevance 45.92%

I have a new Flex 3 it was working fine yesterday, I shut it down last night and plugged it in, it seems to have a good charge (and I have tried it plugged in as well), but this morning it will not boot up.  I hope I don't have to take this back to BB today, any ideas?













Solved!

Go to Solution.

Answer:Flex 3 -1120 wont power on

I had the same issue. it appears that a driver was installed but the system has stalled. It actually happened twice. I sent it in and they "refreshed" it and it did it again. I let the power die on it and it started back up. I don't know of a way to manually shut it down. The old way was take the battery out but its not the case here. The battery is sealed in side and I didn't want to give them a reason to void the warranty. You can charge stuff with the usb while it's unplugged, try draining the battery that way with a phone or tablet.

2 more replies
Relevance 45.92%

I have a Lenovo Flex 3 1120. When I bought it, I went for the hard drive option that had the cheapest price since all the other options were HDD of various sizes and I knew I was going to upgrade to SSD anyway. The flex 3 I have though, does not have a HDD and uses an eMMC embedded storage. When I went to install the SSD, there is an empty space for where the hard drive would sit and there is no SATA connection. There is a socket in the board that is labeled "SATA conn1" but no cable.
 
I called support and was told it is possible to use the SSD and boot from it. The cable and caddy can be purchased but she said Lenovo will not supply the part. I found the part number I think,  1109-01051, but apparently no one else sells it either. There was one on ebay, but it's gone. anyone know where I can find one?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

Answer:Flex 3 1120.- No SATA connection!

update: the item number is actually 5C10J08424. I still had a hard time a seller with it in stock. One website wanted about $70 for it not including shipping. I finally found/bought one on encompassparts.com for about $20 including shipping. I'll update once I get to try it out.

8 more replies
Relevance 45.92%

Computer sees external drive, but the drive does not receive info or data

Answer:Can you use USB 3.1 with a Pavilion Slimline Model S5-1120, ...

Hi there @JPMESQ, I hope you find your Support Forum experience a positive one! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you have a question about USB compatibility. I am happy to help with this. According to the USB 3.1 specification, which is referenced here: USB - wikipedia.org, "The USB 3.1 standard is backward compatible with USB 3.0 and USB 2.0." So in terms of the connection it should work, but the performance will be limited by the slower standard. It is possible that some devices using USB 3.1, may not themselves not be backwards compatible, but that would be a case by case issue. I hope that addresses your question, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Relevance 45.92%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

Answer:Top Urgent Printer HP laser jet M 1120 MFP

Please dont double post, it annoys the moderators . Is it possible to remove the cartridge and then put it back, making sure its in firmly. Ensure its in exactly the way it should be. Is there a bit of covering tape left on the cartridge?
If that fails, Canon customer services.
 

1 more replies
Relevance 45.92%

Is there any way to purchase an internal SATA cable (5C10J08424) for my Flex 3-1120 32GB so that I can make use of the internal drive bay?

Answer:Flex 3-1120 SATA cable

I found this:http://www.ebay.com/itm/5C10J08424-Lenovo-80LX001FUS-B-Flex-3-1120-HDD-Cable-B-Grade-A-/171951968701(Sorry if this can not be published)I would like better to buy it from Lenovo Is it possible?Where?many thanks

1 more replies
Relevance 45.92%

I just received my new Lenovo Flex 3-1120 ( Model: 80LX001KUS).  As delivered, it has 32G of eMMC.  I am desirous of upgrading the machine with a Hard Drive (which I have purchased).    I have discovered that due to the fact that the stock configuration does not have a hard drive that there are two parts that are needed to house and connect the hard drive.  From Lenovo?s parts list those parts are:5B40J08368 HDD Bracket  and5C10J08424 HDD Cable As much as I have tried I cannot find any option for purchasing these parts on-line. Please advise of options to acquire. 

More replies
Relevance 45.92%

I just replaced the hard drive and both cooling fans. When the system is powered up the screen flashes between blue to black to gray to (red-green -blue-black horizontal lines) and repeats. I reset the bios still no change. I re checked all connections the board is getting power, i can push the eject on the DVD drive and it works, all fans come on just un able to get to bios screen. I tried powering up and hitting f10  repeatedly no change. There are no beeps what so ever on power up and while the system is on. The reason for the hard drive replacement was it just stopped working, but at the time I was able to at least get to the HP screen and troubleshoot the problem. I tried un plugging power to system holding the power button for five seconds, plugging back in still same problem. I can hit the print button on the keyboard and hear the computer beep, that is the only beeps i can get. 

More replies
Relevance 45.92%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

More replies
Relevance 45.51%

Self Builds. 500 plus DDR. 60 Gb HDD. Win ME.M'board Elite K7S5A Ver 3.1a Duron 1.3 GhzBought the Canon 8000F scanner and can't get the driver to load. Rang support and they suggest that my mb K7S5A (latest)may not be suitable. They also said that my Via USB 2 card may not have a compatable chipset. This sounds all a bit negeative to me, any way I took out the USB2 card and connected up in to standard USB, still no good.Since all my messing about I now appear to have a bit of a problem in other parts of the PC. My two previous scanners have worked properly on this machine and I hasten to add, I have followed the loading instructions to the letter.Just in case I have corrupted any part of Win ME, I would like to re-load it.How should I go about re-loading Windows ME.I know that I should disable Go-Back, Norton stuff and Firewall etc.Many thanks in anticipation. DM.

More replies
Relevance 45.51%

Hi All,

This is my first post!

I am looking for drivers for Canon L170 Fax/Phone. I have contacted Canon and they said they didn't have anything that will work. I found a post on this forum that says a driver was found, but the post is closed and there is no link or reference to exactly what driver worked.

The thread is closed. The user that posted the question is Sauranan. The thread was closed on 12-May-2009. The title is "Canon L170 FaxPhone Driver Issue"
 

More replies
Relevance 45.51%

I have recently upgraded to XP pro x64 so I can utilize the 4gb of ram. I got all the hardware to work except my trusty Canon 5000f scanner. I looked everywhere on the web to find the driver but could not. Does any one have one or know where I can get it?

Thanks

Answer:Win XP x64 driver for Canon Scanner 5000f.

Canon Scanner 5000f XP X64 driver - Google Search

There is a search that turned up some results. Best bet would be right from Canon.

2 more replies
Relevance 45.51%

Anyone with a Canon S300 printer willing to send me a copy of the driver disk please. I tried Canon but everytime I click on the download link I get taken back to the "Select Your Product" page. The driver is listed on the site as b2B01esx.exe but it doesn't seem to work. I have also tried Driverguide but it doesn't seem to be listed there. Thanks.

Answer:Canon S300 Printer Driver

Any help ? click here

10 more replies
Relevance 45.51%

I recently bought a new PC (O/S: Windows 7) and now it appears that there exists no 64 bit driver for my printer/scanner/fax Canon MF4690PL. Maybe I overlooked? Are there other solutions? Thanks!
 

Answer:Windows 7 x 64 driver for Canon MF4690PL

Try the Vista driver here: http://software.canon-europe.com/products/0010463.asp
 

2 more replies
Relevance 45.51%

Have a new Vista 64 Home Premium machine. Have a Canon i950 printer on my XP machine. Canon does not have a Vista driver for the printer. In these forums, found a post explaining there is a "driver add-on" that makes the i950 driver work in Vista.

Obtained the add-on. It requires that the "base driver" be installed (B3319MUX.EXE). When I run the driver's setup program, get "The Printer Driver Has Not Been Installed" message at the 60% completion point. Have tried the install in compatability mode and "run as administator" (Both XP and 2000), but get the same message. I am also logged in to an Administrator account.

Does anyone know of a way to get the base driver installed on Vista 64? Thank you.

Answer:Canon i950 Driver Will Not Install

Have you followed the instructions on installing the add-on module?

Canon i950 Printer Driver v 1.00 Add-on Module for Windows Vista - TechSpot Drivers

6 more replies
Relevance 45.51%

but the box comes up stating "downloading from windows update" but it never progresses any further even after 1/2 hour !

My machine is an MG 4250 but the driver software states MG 4200

Running Vista

Thanks in anticipation
 

Answer:Trying to install Canon driver software

11 more replies
Relevance 45.51%

Hi All
I have been trying to install the drivers for the above printer without success.
OS: W7/32,firewalls and antivirus disabled
Versions tried:
here and here the add on module.
Has anyone of you come across this problem?

Thanks

Answer:Canon s6300 driver problem

Hi all
I just had to go through and w7 found it and all is sweeet!

1 more replies
Relevance 45.51%

I NEED CANON LPB2900B FOR WINDOWS7 PRINTER DRIVER.

Answer:Windows 7 driver for Canon lbp2900b

i NEED CANON LPB2900B FOR WINDOWS7 PRINTER DRIVER.

4 more replies
Relevance 45.51%

As Canon have still not issued a driver for my Canon D2400U scanner, the advice I was given here a while ago was to download the Vista version as that would run on Windows7.
I have done that but can't get my Windows7 Home premium edition to recognise or load the driver.
Trying to run in compatibility mode, do I choose compatible for Vista or for W7 ?
Is all of this done from Control Panel or Printers and Drivers.
I have the scanner switched on and pluggged into a spare USB.
It's a hot day and brain is not working very well, please give me step by step details to get this scanner operating or I will have to buy a new one!!!

Answer:Trying again to load driver for my Canon scanner

Compatible with Vista, have a look here, you'll need Silverlight to see the video.

10 more replies
Relevance 45.51%

Hi everyone, I've tried but to no result. I connected my Canon XM1 to my computer sometime it will be detected and on some occasion nothing will happen. I was wondering it might be driver problem, but I checked to Canon website and I couldn't find anything or anywhere I can download drivers for this product. Could anyone please suggest a place where I can download driver for Canon XM1 Digital Camcorder?Thanks so much

Answer:Canon XM1 Camcorder Driver needed

are you using firewire of capture card?try re-installing these drivers, if firewire, uninstall and restart, let windows install its own.

4 more replies
Relevance 45.51%

I have a custom made computer Win 7 -Home Prem 64

My regular HP printer broke down (but was working wirelessly just fine)

So I want to substitute an old Canon Fax Phone L80 I have that worked OK on a Vista OS (another machine)

The system "found" the L80 as I plugged it directly into UBC

Says driver not found.......Win couldn't find one automatically and I have no disk

Manual downloaded a driver from Canon....I have no idea how the particular driver arrives and what file it is supposed to download to, maybe that's my problem,

Still can't find driver by hitting Add New printer.

Help file was incorrect, as to what tabs would appear when trying to manually download

So even though the L80 shows up in "Devices & printers" I can't get the driver driving!

What am I missing.........any ideas?

thanks in advance if you can give me a clue


Dick

Answer:Canon FaxPhone L80 driver won't connect

Hi Welcome to Seven Forums .. You problem would seem to be there is no 64 Bit Driver ..

1 more replies
Relevance 45.51%

I have a rather bizarre problem. I'm using a Canon S530D printer on Windows XP, and about 1/3 of the time, when I cancel a print, the entire system instantly shuts down and restarts. Anyone have any ideas what might be causing it? I'm assuming that it's not hardware related, because the printer never had any problems running on the same system under Windows ME.
 

More replies
Relevance 45.51%

Canon Scanner 4200F;OS Windows 7 (64)Downloaded, from Canon site, the CanoScan toolbox AND the 64 bit driver.Both installed correctly and are recognized by the system.When I tried to scan, using the toolbox, the Scanner lamp goes on but the scan will not initiateand the error "Cannot communicate with the scanner - check cable and connection."Changed USB ports - same msg.reloaded drivers - same msg.Canon help claims that the problem is that the OS is "blocking the Communication"Q:  If this is true how do I unblock?

Answer:Canon Scanner driver problems

The issue IS that although the Canon supplied driver for the 64 bit Windows 7 OS loads the WIA driver is required for the scanner to operate.  The WIA driver that came with the 4200F is 32 bit and will not load.Contacted Canon support and finally got them to understand the situation.The outcome is that they are sorry for the inconvience - BUT there is no 64 bit WIA available.Looks like the only solution is to purchase a new, compatable, scanner.Canon won't get the business.Thanks to all.

19 more replies
Relevance 45.51%

PLEAE - Does anyone know where I can get a Windows 7 driver for my Canon iP1000 printer. I know it is an old printer, but there is nothing wrong with it. Canon have been working on obtaining a new driver for months now and still haven't come up with a new one. I am getting desperate as I need to print documents today.

Thanks
 

Answer:Canon iP1000 driver for Windows 7

Try the XP driver in compatibility mode. Just right-click on the installation file, select properties, then select the compatibility tab, tick the "run in compatibility mode for" checkbox, and choose XP in the list.
 

4 more replies
Relevance 45.51%

Dear respective team,

I am trying to install Canon LBP 1210 printer in Win 7 64 bit. I have searched driver in vendor site but was not success to get. Is there anyway to install above printer in 64 bit platform.

Your support is highly appreciated.
 

Answer:Canon LBP 1210 driver for win7 64 bit

check here this is the only one i can access from the canon site

http://support-au.canon.com.au/P/se...download&filter=0&tagname=g_os&g_os=Windows 7
 

3 more replies
Relevance 45.51%

I have Windows 7 64-bit on my pc,I went to the Canon website and they have no drivers for the Canon 5000f scanner running
Windows 7 643-bit.
Is there another website where I can find the correct driver?
 

Answer:Driver for Canon 5000f Scanner

this says the driver is built into windows 7 or not needed

http://www.usa.canon.com/cusa/suppo...scan_series/canoscan_5000f#DriversAndSoftware

what happens when you connect the scanner - whats listed in device manager

have you installed any of the utilities that came with the scanner

whats on the included
CanoScan Setup CD-ROM
 

1 more replies
Relevance 45.51%

First: Happy New Year to you!I'm trying to install a Canon pIXMA5200 printer to my computer, a Mesh running XP(Home)I've done the fitting of printer head, tanks etc.but when I run the installation CD it comes up with "ADDPRINTERDRIVER Error. Specified module could not be found"I've checked the printer connections as user manual suggests, but can find no obvious problem.The only thing I can think is that the manual says I must be the administrator to make changes to my computer. As the sole user surely I AM the administrator?Would appreciate help!Tristar

Answer:Canon Printer Driver Problem

If you have set up an administrator account then you would have to log as as administrator. In Windows XP press down Ctrl+Alt+Delete twice to access the Administrator account, this is at the log on screen.

4 more replies
Relevance 45.51%

my printer driver has somewhta been deleted of my computer and i need another one. Plz someone tell me where i can downloads a working windows xp driver for canon 5100 series printer.

thanks
 

Answer:BJC canon 5100 printer driver

7 more replies
Relevance 45.51%

I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?
 

Answer:Solved: Canon Printer Driver For 8.1

The below image shows the list of compatible Windows versions for the Canon i9100 printer.

Unless Windows 8.1 provides a built-in generic driver for it, you're probably out of luck.
 

1 more replies
Relevance 45.51%

Please write me: [email protected] Yhanks

Answer:canon n670u windows 7 driver

http://software.canon-europe.com/pr...Use the equivelent 32 or 64 bit Vista Drivers !!

2 more replies
Relevance 45.51%

I am trying to install the driver for a CANON N1220U scanner on a WINDOWS 2000 system with sp4. This scanner was previouosly installed and working on this system.I purchased a SONY monitor with an embedded 4-port USB hub  and attempted to connect the scanner thru it. The system did not recognize the hub located in the base of the monitor and when I re-connected  the scanner to the USB port on the system it would not work.I connected the scanner to another computer and it works. I connected another USB device to the computer and it works -elliminating those hardware error possibilities.I tried to re-install the CANON driver for the scanner. During the install the "install device wizard" overides my driver selection and tries to install a default windows driver and then the install completes but with an error at the end ;"the installation failed because a function driver was not specified for this device instance"I think I could successfully install the driver if I could get the wizard to not override my selection.Any ideas?Thanks

More replies
Relevance 45.51%

I pulled an old printer out of the closet to use on a new PC that I am building...just to have a printer connected to it. It doesn't work with the print driver provided with WinXP and Canon no longer supports it. Does anyone know where I might find a print driver for it. It prints test pages very nicely.
 

Answer:Canon BJ-200 Print Driver for WinXP?

7 more replies
Relevance 45.51%

Microsoft tells me that the Canon Selphy CP730 photoprinter is Windows 8.1 compatible, but where do I get a driver? Canon don't have it and Microsoft don't have it. Regarding to Canon is the printer only Windows 7 compatble. I use Win 8.1 64 bit.

Peter.

Answer:Canon Selphy CP730 driver?

This Canon page says Win8.1 drivers are NOT available for the printer:
Canon U.S.A. : Support & Drivers : SELPHY CP730

2 more replies
Relevance 45.51%

I have a Canon Scanner "CanoScan N1220U" that I used on XP.

Looking to get it to work for W7 46-bit.

I tried the XP driver, and it says it successfully installed but, but then a pop up comes up and says:

LaunchAnywhere GUI has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify if a solution is available.

Answer:[need driver] Canon CanoScan N1220U

ok I got the driver to install and now the computer knows it is there.

But now Photoshop (CS4 64-bit) does not list the scanner when I go to file import
(like it did when I had XP and Photoshop 7)

I tried using the install disc that came with the computer, but it says it is not compatible with my OS.

I did install VueScan 8.5.37, but I have to scan in the program, save it, then open the file in photoshop. I'd rather just scan right inside photoshop.

9 more replies
Relevance 45.51%

Anyone aware of a fix so that windows 7 64 bit can install and use caroscan 5000f flatbed scanner?

Answer:canon carascan 5000f driver

I just checked here - Film and Negative Scanners - USB Flatbed Scanner - CanoScan 5000F - Canon USA Consumer Products and see there are no Windows 7 drivers for that scanner

You could try Vuescan from Hamrick if you don't find a suitable solution. The software allows you to use your scanner on a 64-bit OS through its program by providing its own 64-bit driver. It usually offers more options and tweaks over the standard software issued with the scanner. The downfall (if you want to call it that) is it will set you back $40.00 for the Standard edition or $80.00 for the Pro edition. There is a 30-day trial version as well.

List of supported scanners - VueScan Release Notes

1 more replies
Relevance 45.51%

I have 2 boxes of address labels (tractor drive). Is there any way I can use my old Canon BJ-200e to print on them?

Answer:Canon BJ-200e driver/Programs

So, your labels are for a tractor drive printer and your printer is not a tractor drive printer, right?  Do the label sheets have perforated lines along both sides to facilitate removal of the stripes of tractor drive holes?

7 more replies
Relevance 45.51%

i have canon printer cfx l3500if and i want to use it in windows vista 64bit so how will i intall it on my computer

Answer:i need Vista driver for Canon printer CFX

... "qadir123" check out your "PM" link >>Private Message Center... download and extract content from "rar" file to location:Windows\System32\Driver Store\File Repository folder\prnca001.inf_c505b61f... and let me know if it worked for you..... Posting is provided "AS IS" with no warrantieshttp://img692.imageshack.us/img692/...Grrrr... ...im

2 more replies
Relevance 45.51%

I recently bought a canon mv530i on ebay to transfer all my old mini dv tapes onto my computer. No disk came with the device. Try as I might I cannot seem to find the right driver software to install. They all seem to be updates rather than what I need. I am running Win 7. Help please!

Answer:What driver software for canon mv530i?

Windows 7 does not need a special driver for the camera, it should be recognised automatically. Are you using Firewire/IEEE1394 or what Sony and Canon refer to as DV in their handbook? Does your computer have a Firewire input? You can find information about this method of connection on Page 103 of the manual for your camera.
I have a Sony HDR which is very similar to your camera, the biggest problem I have is that some software (Serif MoviePlus) does not connect by Firewire to the camera and yet Roxio Creator and Microsoft MovieMaker have no problem.

4 more replies
Relevance 45.51%

Greetings.
I have an English Windows 7 Ultimate SP1 DVD. I have installed it, and after that I installed my own language (danish), and that went fine. I have allso learned how to make the start- and shut down screen in danish.

For my printer (Canon MG6150) I can only find a multilanguage driver, and allthough Canon support danish languane, I can only get it to show printer properties and maintenance in English. Anybody knowing a trick to make the driver install the driver so it will be in danish?

TIA

Answer:Canon driver only install in English?

Thank you. I did not know this with the ABOUT-button. You learn every day

1 more replies