Computer Support Forum

Kernel-PnP Event ID 219 Driver failed to load problem.

Question: Kernel-PnP Event ID 219 Driver failed to load problem.

I am attaching a screen shot of the Kernel-PnP Event 219 that suggests that a device driver is failing to load at start up. I have been receiving this message for about three weeks and can't relate it to any particular event on my computer. I have trawled the net and had a look at Device Manager but I can't ascertain which driver is not loading and presumably needs to be updated.

I downloaded some software called "Driver Manager" and that has identified 28 out of date drivers. To correct the problem I have to pay a subscription that I can not really afford. Can someone help me identify which driver is causing the problem please?

Relevance 100%
Preferred Solution: Kernel-PnP Event ID 219 Driver failed to load problem.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Kernel-PnP Event ID 219 Driver failed to load problem.

Judesman, I don't recommend paying a subscription as you can get the drivers yourself. That seems to be a plug n play device, look ath the user action section in this link Kernel ID 219

9 more replies
Relevance 101.68%

Slow booting.  Really slow booting.  Seems that using an SD card for ReadyBoot/ReadyBoost is causing the issue.  But why?
On investigation, this only started happening back in November, which coincides with the install of KB2685813 UMDF 1.11 (http://support.microsoft.com/kb/2685813).
Could be a bit buggy....


I'll uninstall the update and see if this solves the issue.
So, first event:

Log Name:      System
Source:        Microsoft-Windows-DriverFrameworks-UserMode
Date:          04/01/2013 10:47:30
Event ID:      10114
Task Category: Startup of the UMDF reflector
Level:         Information
Keywords:      (2)
User:          SYSTEM
Computer:      LAPTOPW7A
Description:
The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-DriverFrameworks-UserMode" Guid="{2E35AAEB-857F-4BEB-A418-2E6C0E54D988}" />
    <EventID>10114</EventID>
    <Version>1</Version>
    <Level>4</Level>
   ... Read more

Answer:UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Hmm.  Now that is interesting.
In my System event log I was getting an NTFS error (57: Failed to flush tlog).  I didn't think it was from my HDD, so using diskpart, I ran a 'CLEAN ALL' on my SD card, then recreated the FS as exFAT (previously it was NTFS).
Seems to be working now, although I'm getting VDS Basic Provider errors (Unexpected failure.  Error code:
[email protected]) "which can be safely ignored" (re: KB979391).
This begs the question: if it can be safely ignored, why is it raised in the first place?
Boot time is also restored to an acceptable timescale.

11 more replies
Relevance 97.17%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 86.92%

I tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!

Answer:Driver WUDFRd failed to load - Event ID 219

It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):

3 more replies
Relevance 86.51%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 86.1%

Hello,

Can someone please help me find out what driver or service 'ksop' is? Or, how to fix it?

I've been troubleshooting my Windows 7 laptop to try and find the cause of random, sudden shutdowns and a bunch of 7026 and 7001 errors. This 'ksop' error pops up every time I reboot.

I tried clean-booting, SFC, CHKDSK, etc, but I can't narrow down a service as the culprit. I tried Googling 'ksop' but I couldn't find anything that explained what it was, or a record of anyone else asking about this issue.

Anyone out there have any idea?

Here's the event info:

Log Name: System
Source: Service Control Manager
Date: 3/22/2015 12:59:37 AM
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
The following boot-start or system-start driver(s) failed to load:
ksop

System
- Provider
[Name] Service Control Manager"
[Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}"
[EventSourceName] Service Control Manager
- EventID 7026
Qualifiers 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[SystemTime] 2015-03-22T07:59:37.826903400Z" />
EventRecordID 220852
Correlation
- Execution
[ProcessID] 548
[ThreadID] 620
Channel System
Computer *********
Securit... Read more

Answer:Event ID 7026: 'ksop' driver failed to load?

So far all I've been able to find out is that 'KSop' is a pool tag, and it's associated with something related to Windows 7. I still don't know what driver it's for, how to find out, or how to fix.

If anyone has any ideas, clues, or suggestions, it would be greatly appreciated. Please, I'm at my wit's end!

3 more replies
Relevance 77.49%

The following boot-start or system-start driver(s) failed to load: i8042prt Any ideas?  Thanks in advance.  - Larry  -----------------------------------------------------------Lenovo 3000 H210 Desktop, Windows Vista Home Premium 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

More replies
Relevance 77.08%

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

More replies
Relevance 73.39%

When the computer starts up i'm getting on error "failed to load kernel memory".The computer itself seems to run slower.Hoping someone could explain how to fix this.Thanks

Answer:failed to load kernel memory

System manufacturer and model?

Please post the exact error message as it appears onscreen.

Louis

4 more replies
Relevance 73.39%

When the computer starts up i'm getting on error "failed to load kernel memory".The computer itself seems to run slower.Hoping someone could explain how to fix this.Thanks
 

More replies
Relevance 71.75%

failed to load kernel library in windows 2000 professional

Answer:failed to load kernel library in windows 2000

Try doing a "repair installation"

2 more replies
Relevance 70.93%

I have recently setup a raid 0+1 array on a computer with 4 identical hard drives. I installed windows 7 and the installation without a hitch. However on the reboot a windows error message appears and says the following:

File: \Windows\system32\ntoskrnl.exe

Status: 0xc0000221

Info: Windows failed to load because the kernel is missing, or corrupt.

I have tried many things in an attempt to resolve this issue. I have tried reinstalling, using a different DVD drive and removing the RAID array to no avail. I have also disconnected the hard drive which is not associated with the RAID array also to no avail.

Any help would be much appreciated as i have been trying to solve this problem for several days now and i have come up with nothing.

thanks in advance

Twiggy145

Answer:0xc0000221 Windows failed to load because the kernel is missing or corrupt

Greetings,

In order to help troubleshoot I will need more information about the setup your using. Have you choose to use raid 0? Or raid 1? Have you configured the bios correctly? Do you have the raid drivers?

4 more replies
Relevance 70.93%

Hello everyone , I recently install Win8 Pro and my laptop has been crashing when I shutdown. It restarts and I got the BSOD Driver_power_state_failure ! I reinstall OS three times but useless . I hope you guys solve this problem.

Thank you in advance !

Answer:Driver power state failure - Kernel event 41

Your BIOS dates from 2010. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

D: drive only has about 5% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on all hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

Please install the drivers for this device:





Not Available ACPI\SMO8800\1 The drivers for this device are not installed.



This is most likely the Dell Free Fall sensor - a shock sensing device for the hard drive.

The memory dumps blame your wireless networking drivers. Please:
- download a fresh set of the wireless drivers
- uninstall the current wireless drivers
- install the freshly downloaded drivers
- monitor for further BSOD's

Since this is a networking error, there are other possibilities as to what's causing the problem.
If the BSOD's continue after updating the wireless drivers, then try this:





Anti-Virus Removal:
Please do the following:
- download a free anti-virus for testing purposes: Free AntiVirus If using Windows 8, enable Windows Defender and th... Read more

2 more replies
Relevance 69.29%

Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

Any ideas?
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
<EventRecordID>39029</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>M... Read more

Answer:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

Memory exception but we need to examine the DMP files to find out why.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

9 more replies
Relevance 67.65%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.
This event has never repeated after many reboots.
I have not seen any subsequent errors of any sort.

Does the absence of repetition indicate that Windows suceeded on the next reboot,
or that Windows has given up trying to mend a fatal wound ? ? ?

There were 4 off such error events within 1 second, designating these *.MOF files
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOF
C:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWS COMMUNICATIONFOUNDATION\SERVICEMODEL.MOF
C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOF

I later found that starting a few seconds before that, and finishing a few seconds after,
there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.
Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-
4 original *.MOF files that retained timestamps of last year and before
7 original *.MOF files that were halved in size as they were modified
44 brand new *.MOF files I have not seen before.

Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?
Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?
Does the continued presence of all these *.MOF file... Read more

Answer:SINGLE WinMgmt event 4 :- "Failed to load MOF ... while recovering repository file."

First, some data on .mof files, http://technet.microsoft.com/en-us/library/cc180827.aspx AND http://filext.com/file-extension/MOF.Now that you made me check this system ...I have 121 files with the .mof extension. About 70% of them seem to be in C:\Windows\System32\wbem\AutoRecover, 25% in C:\Windows\System32\wbem..a few in service pack folders, MS.NET, etc.From what I see, it's too technical for me to worry about. If it was something to worry about, I suppose that Event Viewer would give me an error message about it or I would get a BSOD, etc.I don't spend a lot of time worrying about WMI processes...they don't exist for me, they exist for XP (at least, that's my interpretation).Louis

2 more replies
Relevance 67.24%

Many people have posted about Event 2 - Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035.  I have not seen any posts where someone from Microsoft explained why this event occurs, why it occurs
in groups of 20 in about 10 seconds, how to prevent it, or whether it is something to be lived with.
Can anyone, especially someone from the NTdebugging team, a/k/a Global Escalation Services (GES), address this?
Thanks.

More replies
Relevance 66.01%

I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week). Anyone else experience this problem or know what the error code below indicates?
 

Answer:Windows update - Kernel-Mode Driver Framework version 1.11 failed

not with that particular update, but there have been times where I've manually downloaded the exe and installed it without issue, when it continually failed via Windows Update.
 

8 more replies
Relevance 65.19%

Not sure if this is the most proper forum, the other choice being Performance, but oh well. I am having a problem that just appeared a few days ago where my Windows 7 Pro boots about halfway, with the background coming up and a couple startup apps start
normally, but then the process stops. Roughly half the services start, and the system wedges in place, requiring a restart. Sometimes it's so bad that a hard power-off is required.

I am severely disabled due to Lou Gehrig's Disease and absolutely require that the system start properly and bring up my eyegaze control software. Anything less is a critical error. Nevertheless, prior to medical retirement, I was a career IT professional for
20 years, running UNIX, Linux, PC and Mac mixed shops and can converse in jargon.


I think these might be the errors at the basis of my problem, although Windows Event Viewer messages are notoriously cryptic without a manual. The event error messages are below:

The error is about the particular app (Lifemate):
<l > <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<l > <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-09-14T19:55:42.000000000Z" />
<EventRecordID>227437</EventR... Read more

More replies
Relevance 64.78%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 64.78%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 64.78%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 64.78%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 64.78%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 64.37%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 64.37%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 64.37%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 64.37%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 64.37%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

Answer:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Relevance 63.96%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 63.96%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 63.96%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 63.96%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 63.96%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.96%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 63.96%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 63.96%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 63.96%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 63.55%

Welcome,
I have a problem. Every day I have this error in event viewer, system log:
{Registry Hive Recovered} Registry hive (file):\??\C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\S-1-5-21-4089430802-3287748835-2730757419-1001-0-ntuser.dat was corrupted and it has been recovered. Some data might have been lost.
This error repeats every day at about 3:00AM.
Maybe someone could help me? Thanks in advance.

Answer:Event ID 5 Kernel-General error in Event Viewer

Hi:

Just curious:
Are you running MBAM Premium (paid version), or Free?If it's Premium, what time does your scheduled daily Threat scan run? (Assuming you are running a daily Threat scan, which is the default scan schedule.) (Dashboard > Settings > Automated Scheduling > Threat Scan > Edit)

Thanks,

MM

7 more replies
Relevance 63.14%

Hi,

I posted this annoying problem on the MS community but I think only useless moderators are running that forum, hopefully that is not the case here.

I am using win7 64 bit and recently my machine can no longer hibernate for a second time after a clean boot (after a clean boot it can hibernate but then it cannot after a resume). I noticed Event 45 in the event viewer and it does not make any sense. I tried to hibernate from the command line but I am getting a message "not enough storage is available to process this command.(8)". When the hibernation fails I got back to the login screen (as if I locked the station).

It is an annoying problem since I have to restart the PC every other day, so if anyone smart enough to give some insights, I would be grateful.

Answer:Event 45: The system could not sucessfully load the crash dump driver

aena9200, I just reviewed your MS thread

MS Community

ZigZag3143, was offering good advice and help. Surely you are frustrated with your error. If you don't feel comfortable posting there, then by all means we can help. Follow his advice

"If you prefer we can examine the event viewer log and that will tell us if there was a BSOD.

Please provide us with your Event Viewer administrative logs by following these steps:


Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here"

You can upload here the file by using this method

Upload Screenshots and Files

9 more replies
Relevance 62.73%

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

Answer:The driver \Driver\WUDFRd failed to load

you ever resolve this?

1 more replies
Relevance 62.32%

The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance.

Just browsing through my Event Viewer trying to knock out and solve any random errors when THAT pops up a few times a day. Could anyone give a clue as to what it means? Hardware or software issue?

Answer:Event ID Error Event 137, Kernel-Power

Well (S4) is hibernation.

You could run a test by shortening your hibernation setting, make sleep after 15 and hibernate after 30, then stop using it and note wall clock time. Calculate when it will drop into hibernation. Wake it up fifteen minutes after it should have hibernated and see if the event coincides with the machine changing from S3 to S4.

To confirm your machine supports all the necessary sleep states at command prompt(admin) type

powercfg -a

10 more replies
Relevance 62.32%

Please advise what this error might be I've started getting several times a day:

Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 21/11/2015 14:14:07
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer:
Description:
Session "" failed to start with the following error: 0xC0000011
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2015-11-21T14:14:07.333968800Z" />
<EventRecordID>5752</EventRecordID>
<Correlation />
<Execution ProcessID="6760" ThreadID="5300" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Swale</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data ... Read more

Answer:What is Error Event 2 Kernel- Event Tracing?

Any ideas what this maybe due to?

3 more replies
Relevance 62.32%

I turned off System Restore in order to run Superantispyware and when I tried to turn it back on ,,System Restore encountered an error to enable/disable one or more drivers failed to load. Restarting did not help. With some help by googling my problem i was lead to event manager and found errors at the time I tried to turn System Restore back on. "The following boot-start or system start driver failed to load" It listed nvatabus and nvraid. I have ran Superantispyware with System Restore off9because I cannot get it turned back on) but I have not tried it in safe mode. Should I try running it in safe mode or do you have any other suggestions or reasons why these drivers will not load? Thanks a bunch for any help you can give me with this!!!
 

More replies
Relevance 62.32%

When i start my computer up I get the message Error 7323 1 or more network drivers failed to load.

Answer:Driver failed to load

If you are networked then you have trouble beyond my experience.If not, then which Windows are you running 95-XP?Try Google with error+7323 and see what turns up......and maybe my posting will encourage someone with wider knowledge to help you.

7 more replies
Relevance 62.32%

This only happened once immediately after reboot following removal of Comodo Firewall 3.5.This event has never repeated after many reboots.I have not seen any subsequent errors of any sort.Does the absence of repetition indicate that Windows succeeded on the next reboot,or that Windows has given up trying to mend a fatal wound ? ? ?There were 4 off such error events within 1 second, designating these *.MOF filesC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V1.1.4322\ASPNET.MOFC:\AC30D119A40F2C8C8708A20576\I386\LICWMI.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V3.0\WINDOWSCOMMUNICATIONFOUNDATION\SERVICEMODEL.MOFC:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V2.0.50727\ASPNET.MOFI later found that starting a few seconds before that, and finishing a few seconds after,there were 51 *.MOF updated time stamps in C:\WINDOWS\System32\wbem\AutoRecover.Comparing Acronis images of C:\ taken before and after removal/replacement of the Firewall I see :-4 original *.MOF files that retained timestamps of last year and before7 original *.MOF files that were halved in size as they were modified44 brand new *.MOF files I have not seen before.Do all these extra *.MOF files in ...\wbem\AutoRecover indicate a major disaster ?Does the absence of further WinMgmt event 4 errors show recovery without failure on the next reboot ?Does the continued presence of all these *.MOF files show that after recovery Windows was too lazy to delete redundant files ?Or has it left it all for me to try and recompile or something ?I am hoping t... Read more

Answer:Winmgmt Event 4 :- "failed To Load Mof ... While Recov"; 51 new wbem\*MOF files

bump

1 more replies
Relevance 62.32%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 62.32%

Briefly:
My old system hasn't been powered on for about a year. Problem was the onboard video failed (I think)

Recently replaced it with a video card from another system (riva TNT) and bought some memory (system wouldn't boot, determined that the memory was bad)

Now the system booted but win2K wouldn't work. No problem I have XP now...

After multiple error during the xp install I finally got through it...only the computer will only boot in safe mode..

Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow ??? in device manager

Still will not boot normally

Checked event log got the following error:
Event 7026: The following boot-start or system-start drivers failed to load:

Amdk7
fips

Searched the net found a M$ support about it

http://support.microsoft.com/?kbid=306458

couldn't find amdk7.sys but managed to update the driver over the net, now its there...yet I get the same error

I did the regedit described but no folder called "parameters"

Made one....didn't work....deleted the value
added the key to my available folder....didn't work

I'm at wits end....I've been working on this (off and on) for a month

Can anyone help with this one?????
 

Answer:Event 7026: The following boot-start or system-start drivers failed to load: Amdk7

12 more replies
Relevance 61.5%

Any suggestions on what to do about this?



Updating the driver didn't pan out, neither did uninstalling and rebooting (driver installation failed on reboot). Drive was working before. I know this can be solved; seen this before on somebody else's computer a year ago. On the other hand, maybe the driver isn't compat with 64bit Ultimate--but it was OK under 32bit Home Personal.

Answer:CD drive driver failed to load

Correction. The drive in question isn't a CD drive. It's a DVD drive.

20 more replies
Relevance 61.5%

 I'm getting a warning in the event log upon startup.  Windows 8.1 Pro.   This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error.  What is WUDFRd ?  All the information I can locate refers users to their OEM for a driver update..  Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          2/10/2015 11:24:03 AMEvent ID:      219Task Category: (212)Level:         WarningKeywords:     User:          MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />    <EventID>219</EventID>    <Version>0</Version>    <Level>3</Level>    <Task>212</Task>    <Opcode>0</Opcode>    <Keywords>0x800... Read more

Answer:The driver WUDFRd failed to load...

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

1 more replies
Relevance 61.5%

I just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!   

Answer:The driver WUDFRd failed to load...

i have similar "issue" with my W520: Log Name:      SystemSource:        Microsoft-Windows-DriverFrameworks-UserModeDate:          29. 7. 2011 0:49:19Event ID:      10114Task Category: Startup of the UMDF reflectorLevel:         InformationKeywords:      (2)User:          SYSTEMComputer:      ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.    Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          29. 7. 2011 0:49:19Event ID:      219Task Category: (212)Level:         WarningKeywords:     User:          SYSTEMComputer:      ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3.  in my case it is related to external USB hard drive, which is displayed... Read more

9 more replies
Relevance 61.5%

Has anybody been able to fix this warning message that came with W8? Every machine I have running W8.1 gets a couple of these warnings at boot time. This system ASRock Z77 OC Formula/3770K seems to get a triple dose of the warnings. I have tried the "Fix" of setting the startup to "Automatic" for "Windows Driver Foundation" but that had no effect. I do have a USB Keyboard and Mouse connected to the system but then who doesn't these days. I know it is just a warning message and probably has no effect on the system but.... I'm so close to having a clean event log at boot time. Any next step suggestions would be appreciated. Maybe W8.1.1 will fix?

Answer:Driver\WudRd Failed to Load....

I used to see this, but I don't any more. I don't remember what I did to fix it, it was a while back.
But I have the service set like this, so maybe that was it:

wudfsvc = Manual start

10 more replies
Relevance 61.5%

I keep getting the following message which I don't understand:

" Output Firewall
Output Firewall
Failed to load Output Firewall netwark operation driver.
Output Firewall functionality is limited: failed to load AFW.SYS driver."

I'm using the free Outpost Firewall which I downloaded from the Majorgeeks site.

syrk
 

Answer:message: failed to load AFW.SYS driver

Go here and see if this helps.
http://www.outpostfirewall.com/forum/showthread.php?t=22526
 

4 more replies
Relevance 61.5%

My friend asked me to work on their computer. It is a Dell Precision 690. It was running Windows XP 64 bit. The computer was working fine when they shut it down. The next day when they powered it up it came to a black screen that said Load Needed DLLs for Kernel. I attempted to run a repair on Windows but it was saying there was no hard drive found. I tried with another hard drive 80 GB and it was only picking up 3742 MB on the drive. I looked on the Dell support website thinking maybe I needed to update the BIOs but there was no utility on there just an exe that you had to run once your computer booted up. Any help would be greatly appreciated!
 

More replies
Relevance 61.5%

This is my wifes laptop. It is a Dell Inspiron 6400 Duo core processor with Windows XP Pro installed on it about a month ago. She had a low battery indicator coming on and lost power, upon turning the machine back on got the dreaded error. I have tried booting in Safe mode with no luck..... have tried the boot ini rebuild with no luck. I am going to reinstall Windows XP but thought I would ask if there is another solution. I am not to worried about the data on the drive because I have recently loaded XP on it, just wondering if there is an easier fix; or if a complete reformat will do the trick? Thanks for any responses and help!!!
 

Answer:Load Needed DLLs for kernel Problem

9 more replies
Relevance 61.09%

the motherboard is an msi 760Gm-E51
I went to msi website and downloaded the drivers for the motherboard because the system was crashing. I thought it was probably caused but the graphic driver but when I uninstall the driver and tried to run the ccc install again I still get failed to load detection driver. I tried using ddu to totally uninstall the current graphic driver but that didnt work.
I dont know what else to try to get this computer working

Any help will be great thanks in advance.
 

Answer:ccc failed to load detection driver with new install of win 7

Did you try the Factory install disks.? I only downloaded a few drivers once & it messed up my Win7 PC. I am sure you will get help from one of our great Tech Gurus on this forum.
 

7 more replies
Relevance 61.09%

I have this previous problem... you need not read this for this current problem though
http://www.techspot.com/community/topics/bsod-upon-non-safe-mode-booting.212365/

I run on Windows 7 Home Premium 64-bit.

I want to install a newer update on my ATI graphics video driver. So I downloaded the one that suites mine which is AMD Catalyst Software Suite Omega (14.12) (for Radeon HD 6000 series) and during installation it says "Failed to load detect driver" and stops. Now I don't know what to do.

This is my first time downloading this so there are no programs like this in my "currently installed programs". I tried uninstalling the driver in the Device Manager but it just reinstalls back(when I scan for hardware changes). Thanks for the reply!
 

Answer:AMD Catalyst Failed to load driver detection

Is this a desktop PC or a laptop?
 

1 more replies
Relevance 61.09%

"OMCI system driver failed to load on start up." Source: Service Control Manager.

I have had this error message appear repeatedly over the past 2 months or so.

More recently the following also fail to load:
PCIIde
ViaIde

Windows (XP SP2) also often fails to start, sometime failing after the Windows logo screen has run, sometimes it doesn't get that far. Hitting the power and re-trying works...

Any advice appreciated.
 

Answer:System driver OMCI failed to load...

Kservice
and
PC tools Anti-Virus Engine (now uninstalled)

Also have frequently hung on starting.

Another recent error:
"The Messenger Sharing Folders USN Journal Reader service service failed to start:
...The service did not respond to the start or control request in a timely fashion. "

Another recent error
"An error was detected on device \Device\Harddisk0\D during a paging operation."

and

"The device, \Device\Scsi\JRAID1, did not respond within the timeout period."
 

3 more replies
Relevance 60.27%

I received a windows network error and went into events log and it has a warning on it. How do I resolve? do I need to assign a task to it or somehow delete. There are several events with warning from source Microsoft windows kernel processor power. Please
help.

More replies
Relevance 60.27%

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

Answer:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 60.27%

my friend already finished installing windows 7 ultimate..it works well but he always get the error message "SlowDownCPU Failed to load hardware monitor driver" each time when he start the computer.he already looked at his device manager but there is no indication that his driver is missing or error..but the most important thing, there is no problem with his computer n it functioning well..so anybdy can help me? what the message is all about? how to solve it..or if cant solve it,then how to turn off that error messge..he use desktop, n i not so sure about his computer specification..thnks

Answer:SlowDownCPU Failed to load Hardware Monitor Driver

SlowDownCPU.exe Windows process - What is it?





Quote:
Important: Some malware camouflages themselves as SlowDownCPU.exe, particularly if they are located in c:\windows or c:\windows\system32 folder. Thus check the SlowDownCPU.exe process on your pc whether it is pest.


In your case, I don't think its a virus as stated above, as if the virus was doing anything its designed not to notify you about it.

First, open the start menu, and in the search box, type in

Folder Options

and press enter. Navigate to the 'View' tab. Check 'Show hidden files and folders'.Then tell him to navigate to C:\Windows and in the search box, type in 'SlowDownCPU.exe'. See what results come up. If there are none, there is no virus affecting system files. If there are results, we will guide you step by step.

EDIT: To stop the program starting up at boot, in the search box type

msconfig

and press 'Ctrl' + 'Shift' + 'Enter'. In the 'Startup' tab, uncheck anything to do with 'SlowDownCPU'.

5 more replies
Relevance 60.27%

I have seen this event several times in the Event Viewer program. Is it something that I should be concerned?

Answer:The following bootstart or systemstart driver failed to load: Rawdisk3

Do you have a portable drive or flash stick plugged in during this time?

Please post back a screenshot of Disk Management - Post a Screen Capture Image
showing fully scrolled, after this error next appears and without touching anything else.

2 more replies
Relevance 60.27%

Hi all.

My pc has been hanging randomly and I have to use the power button to shut down/restart.

I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.

I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.

A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.

Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).

Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.

I've run the following tests so far here

I have no driver issues showing up in Device Manager, so that looks ok.

Please advise. Thank you.

Answer:The following system start driver(s) failed to load: mbmiodrvr

I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.

Do you have that application installed, or some other temperature / fan speed monitoring sw?

Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.

Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)

If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup

Bill

5 more replies
Relevance 60.27%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 60.27%

Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:

Windows failed to load because a critical system driver is missing or corrupt.

Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys

Can anyone shed some light on how to resolve this?

Thanks,

Evan

Answer:Windows failed to load b/c driver is missing or corrupt

: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various

Go to website of that company and try to download driver.

You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.

Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.

1 more replies
Relevance 60.27%

Hello all.

After getting my FF7 set from a friend a couple weeks ago, nostalgia kicked in and I got his FF8 copy also but I'm having problems with it. I also have no problem playing FF7.

Installing it goes along with no problems till the end, where it says "Failed to load custom driver" and it goes to desktop. I try to start the game and same thing. I got the 1.2 patch but am unable to install EAX because again it says failed to load custom driver. What is going on?

Windows XP Home Edition
Pentium 4 2.2 Gz
256 RAM
Intel 82845G/GL/GE/PE/GV Graphics Controller
 

Answer:Final Fantasy 8 (PC) Failed To Load Custom Driver

13 more replies
Relevance 60.27%

Umm, today I've been solving all kinds of event errors but this one remained unsolved mostly because I can't find any info about it.

It shows in event viewer log on every boot / win restart. I don't know what it is and how does it affects me. I would be grateful if someone can give more info or potential fix.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />

<EventID>2</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>2</Task>

<Opcode>12</Opcode>

<Keywords>0x8000000000000010</Keywords>

<TimeCreated SystemTime="2017-05-13T23:52:58.448595000Z" />

<EventRecordID>480</EventRecordID>

<Correlation />

<Execution ProcessID="2384" ThreadID="2208" />

<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>

Answer:Event ID 2: Kernel event tracing

Bump

1 more replies
Relevance 60.27%

Hi,

For the past 3 nights between 2100 and 2200 Event Viewer has been recording a string of approximately 150 'Kernel Event Tracing'events. The system works ok, but as I sit and watch, the event viewer racks up about 1 every 5 seconds. I have attached a screen shot.

The PC is about 5 years old, but this install of Windows 7 SP1 was done about 1 month ago along with the addition of a Samsung SSD.
My searches have not found any suggested solutions other than system restore or download a 'Registry Fix' which doesn't appeal to me at all.

Any help would be appreciated.
Rob.

Answer:Kernel Event Tracing Event ID 2

Hi try this. Rename this file: %windir%\panther\setup.etl to setup.old and reboot.

18 more replies
Relevance 60.27%

I get a system hang randomly. image on screen is frozen and sound loops. nothing in minidump. I would appreciate any help, thank you.

GENERAL(tab)
Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D

DETAILS(tab)
- System

- Provider

[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}

EventID 3

Version 0

Level 2

Task 2

Opcode 14

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-08-01T06:13:46.109600000Z

EventRecordID 81

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 152

Channel Microsoft-Windows-Kernel-EventTracing/Admin

Computer Doom-PC

- Security

[ UserID] S-1-5-18


- EventData

SessionName Microsoft-Windows-Setup
FileName C:\Windows\Panther\setup.etl
ErrorCode 3221225485
LoggingMode 5

Answer:event 3, kernel-event tracing

  
Quote: Originally Posted by pruw


I get a system hang randomly. image on screen is frozen and sound loops. nothing in minidump. I would appreciate any help, thank you.

GENERAL(tab)
Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D

DETAILS(tab)
- System

- Provider

[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}

EventID 3

Version 0

Level 2

Task 2

Opcode 14

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-08-01T06:13:46.109600000Z

EventRecordID 81

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 152

Channel Microsoft-Windows-Kernel-EventTracing/Admin

Computer Doom-PC

- Security

[ UserID] S-1-5-18


- EventData

SessionName Microsoft-Windows-Setup
FileName C:\Windows\Panther\setup.etl
ErrorCode 3221225485
LoggingMode 5



Is win 7 installed already?
Do you have a backup from before the problem started?
Do you have a working win 7 dvd to do a repair install?

There are several ways to find what the problem is. The best is to go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.
... Read more

1 more replies
Relevance 59.86%

hi, basically I have an Acer Aspire 5738Z notebook it was going a bit slow recentley so I decided to wip it clean and start again, before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot. I thought this was my chance to wipe the whole think clean (using Alt+F10, acre Erecovery management) so I started doin it and after 17 long hours of the progress being stuck on 82% I decided it was time to turn of the computer and try it again, which I did and the whole thing was completed fine but when it restarted it came up with the message "windows failed to load a critical driver is missing or corrupt" and attempted to restart and try again only to be greeted with the same message again!

I have no windows 7 DVD but after a few hours of scratching my head I realized that my brother has the exact same laptop so I made a system repair disk from his laptop to use on mine... only to find that "startup repair cannot fix this computer automatically" and now it boots up but gets stuck on the windows logo screen and I've currently been there for almost 3 hours!

Can anyone help me please the laptops only a year old and I can't really afford the cost to get it fixed professionaly any help would be greatky appreciated... Thanks in advance guys!

Answer:windows failed to load critcal driver is missing or corrupt...help!

Bump!

6 more replies
Relevance 59.86%

File: \windows\system32\drivers\ltoxvyo.sys

status: 0xc0000225

Vista Home Premium.

need some help on how i can get this machine functional again.

i do have the vista installation disc unfortunately due to the short length of the SATA connectors from the power supply they simply do not reach the ROM drive while being connected to the hard drive at the same time.

if anyone needs any more info just ask.
help would be much appreciated,

Answer:(Failed to load because of a critical system driver is missing, or corrupt)

Hello and welcome to the forum...

Can you tell me if you can get to your main desktop if not have you tried to boot in safe mode. Here's how to boot in safe mode just in case.

Safe Mode

But please let me know if you can get to your desktop.

Tom

3 more replies
Relevance 59.45%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 59.45%

New desktop built by my son the engineering student who is now too busy to assist me in resolving this problem. Computer has been used for 2 months. Saturday, Oct. 1, 2011, Windows would not open. Saw flash of a blue screen in the opening sequence, but not long enough to read anything displayed on it. Then message, "Windows failed to start. A recent hardware or software change might be the cause."

I ran Startup Repair. No problems diagnosed; nothing repaired; problem not resolved.

I ran a System Restore - only one restore point available: September 29, 2011. Computer returned message that system was restored; problem remained.

I am able to open Windows 7 in Safe Mode. No diagnostic or repair tools available have resolved the problem.

In Safe Mode, I was returned this result:Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8800494E081
BCP3: FFFFF880031FE860
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100611-11481-01.dmp
C:\Users\Kim\AppData\Local\Temp\WER-21606-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
I am attaching the two files that describe the problem. If you need more information from me, let me k... Read more

Answer:Windows 7 failed to open - Problem Event Name: BlueScreen

  
Quote: Originally Posted by Kim0158


New desktop built by my son the engineering student who is now too busy to assist me in resolving this problem. Computer has been used for 2 months. Saturday, Oct. 1, 2011, Windows would not open. Saw flash of a blue screen in the opening sequence, but not long enough to read anything displayed on it. Then message, "Windows failed to start. A recent hardware or software change might be the cause."

I ran Startup Repair. No problems diagnosed; nothing repaired; problem not resolved.

I ran a System Restore - only one restore point available: September 29, 2011. Computer returned message that system was restored; problem remained.

I am able to open Windows 7 in Safe Mode. No diagnostic or repair tools available have resolved the problem.

In Safe Mode, I was returned this result:Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8800494E081
BCP3: FFFFF880031FE860
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100611-11481-01.dmp
C:\Users\Kim\AppData\Local\Temp\WER-21606-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
I am attaching the two files th... Read more

1 more replies
Relevance 59.45%

Hi all,

How're you all? I need some major help with this issue, I feel like the more troubleshooting I'm doing on my own, the more I'm messing up this computer.

Computer Specs (top of my head)
Computer: Compaq Presario V3000Z
OS: XP Home Edition
Processor: AMD Turion 64x2
Recovery Partition, No Recovery CD


The problem: Started with hal.dll being missing or corrupt. Took advice from some forums and went into XP Recovery Console and replaced the hal.dll from the Recovery CD (NOT for this computer).

Side note: Any attempt to bootcfg /scan or bootcfg /add or any bootcfg command did NOT recognize the C: drive. It only recognized the recovery partition (D:/MiniNT)

The 2nd problem: After replacing hal.dll, the computer informed me of a second problem. It said the ntoskrnl.exe file was missing or corrupt. So I followed the same protocol and replaced that file with the clean file from the Recovery CD.

The final and 3rd problem: After replacing the ntoskrnl.exe file, the computer read this:
"Windows could not start because of an error in the software.
Please report this problem as :
load needed DLLs for kernel
Please contact your support person to report this problem."

Additional problem: I cannot access the recovery partition anymore at the boot screen. When I press F11 it takes me directly to the aforementioned 3rd problem.

Side note: I have checked the boot.ini file in the Recovery Console and it looks fine.

If I have... Read more

Answer:Major Software Problem - load needed DLLs for kernel [WinXp]

Hello, pyrosaga :wave I see you do have some issues, for sure. Also, I noticed you tapped F11. If you were trying to go into safe mode, tap F8. F11 just re-sizes your screen.

Maybe in Safe Mode, you can get a little further, and I am sure someone will be along in due time.. But, do try the F8 for Safe Mode, for now, and see what you have.
 

7 more replies
Relevance 59.04%

the following boot-start or system driver(s) failed to load: SRTSP SRTSPX
Anyone were seen that problem?
Laptop is a compaq and running windows Vistahome Premium
cheers

Answer:the following boot-start or system driver(s) failed to load: SRTSP SRTSPX

Ohh sorry.. got that from the event log..

3 more replies
Relevance 59.04%

windows \system32\drivers\ msisadrv.sys
 
Status: 0x000000f
 
would like to repair this without reloading if possible
 
thanks
Brett

Answer:windows failed to load because a critical system driver is missing or corrupt

I have a few questions:
1. Do you have a repair disc?
2. If not, does the PC have a recovery partition?
3. Can you boot from a live CD (such as Puppy Linux)?
4. What were you doing before the problem started?

7 more replies
Relevance 59.04%

Hi,

I have a Qosmio X770 and its blue screening occasioanly but I cannot find out why as the Crash dump driver fails to load on boot.

I gave googled and tried recreating page file, deleteing, it rebooting, recreating again, also setting dedicate dumpfile in the registry and still every boot I get event ID 45

The system could not sucessfully load the crash dump driver.

I have ran SFC and all files are fine

Windows 7 64 Bit, Main OS

anyone any ideas?

Thanks

Answer:Qosmio X770 - BSOD and Crash Dump Driver Failed to load

Found an user who had the same issue with the dump file and this could be solved by deleting paging file, then resetting it and after that seems to have solved the problem...

8 more replies
Relevance 59.04%

Hi everybody,

This is my first post on this forum. I've recently come across a problem with my computer. I'm running Windows Vista 32 bit. I shut the computer down one day, and the next day turning it on I came across this problem.

File: \Windows\System32\Drivers\nqgbwc.sys

Status: 0xc0000225

Info: Windows failed to load because a critical system driver is missing, or corrupt.

I have no clue what this means. It said insert windows installation disc and repair computer. I did this, self repair found nothing. I then tried system restore and it could not initialize which is a pain in the ass. My last resort is to reinstall windows vista but I think I'm going to lose everything.

If anyone has any advice or suggestions it would be greatly appreciated.

Thank you,
Kevin

Answer:Windows failed to load because a critical system driver is missing, or corrupt.

First see if you can boot into Safemode without it giving you that error. If you can, first try searching for that driver to see if its even in your system32 folder.

I recently just checked my computer and it is not in mine by default, which means its a file relating to a third party program/app that has been installed on your machine. If you can figure out what the abbreviation for NQGBWC is from the list of installed applications on your computer, then you can isolate which program on startup is causing the failure on booting windows due to the missing system file.

As you may have already tried, i cannot simply google search nqgbwc.sys as it gives me just THIS post only. If you cannot find the problem, then the only thing possible from there is to reinstall your OS but of course BACK UP EVERYTHING IMPORTANT FIRST.

2 more replies
Relevance 58.63%

hi guys,
well i was installing an automatic update for windows overnight, then came back, my computer had restarted and the update hadnt been completed.
anyway when i tried to complete the update it kept stopping saying it couldnt be completed.
so that was that, but then my comptuer started going nuts.
i uninstalled XP service pack 2 to try and sort it out (ive had some problems since getting SP2), so it uninstalled it fine, and restarted in safe mode.

now i have a problem when im rebooting and logging onto desktop, im getting the desktop display picture(background picture), and then no explorer load up.
i try and run explorer.exe and i get the message:
'could not load event logger'

im also getting the repeated message 'windows has finished installing the software for your new devices, you must restart for the ..blah blah'.
when i uninstalled SP2 and it restarted in safe mode it went through announcing all my 'newly installed' hardware devices like ati card, modem, disk drives etc...
anyway so now i cant load windows and i want to back up some stuff and maybe just reformat or reinstall windows.

please help me out. and DAMN SERVICE PACK 2!!
lol.
thanks.
 

Answer:'Could Not load event logger' XP start up problem

ill add that i cannot access safe mode either because it loads up,then gives me the option of continue to safe mode or choose the recovery option, i click continue to safe mode and it just sits there.
then if i press alt cntrl delete it does the same 'event logger' message.

realy weird.
i just want to back up a few things then reinstall windows but i cant even get into safe mode
 

2 more replies
Relevance 58.63%

Log Name:      Microsoft-Windows-Kernel-PnP/Configuration
Source:        Microsoft-Windows-Kernel-PnP
Date:          1/16/2016 6:00:17 AM
Event ID:      411
Task Category: None
Level:         Error
Keywords:      
User:          SYSTEM
Computer:      DESKTOP-7C1QOQ8
Description:
Device IDE\CdRomHL-DT-ST_DVDRAM_GH24NSB0________________LN01____\5&3682c44a&0&1.1.0 had a problem starting.

Driver Name: cdrom.inf
Class Guid: {4d36e965-e325-11ce-bfc1-08002be10318}
Service: cdrom
Lower Filters: 
Upper Filters: 
Problem: 0x13
Problem Status: 0xC0000034
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
    <EventID>411</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2016-01-16T14:00:17.169630500Z" />
    <EventRecordID>647</EventRecordID>
    <Correlation />
   ... Read more

More replies
Relevance 58.22%

File: \windows\system32\drivers\ksecdd.sys

Status: 0xc00000e9

Info: windows failed to load because a critical system driver is missing or corrupt.

Any help is appreciated. The computer will not even turn on or get past this point.
 

Answer:Info: windows failed to load because a critical system driver is missing or corrupt.

if your computer is telling you that window failed to load, that means you need to format the system and install in window on it, and you must do it before i damage your hard drive.
prince
 

5 more replies
Relevance 56.99%

Hello,for some time I've been having serious problem with my grapihics card. From time to time everything except sound freezes and screen goes black. At first it stayed that way for a few seconds, now it is up to two minutes. Then everything goes back to normal and Windows displays message "Display Driver NVIDIA Windows Kernel Mode Driver Version 280.26 has stopped working and has successfully recovered'. This happens with any driver downloaded from Nvidia site, but not with driver from Lenovo (at least I think so, it was ok for over a week, whereas with Nvidia driver it freezes almost every day). I could just use Lenovo driver, but driver is from 2009 (180.00 or something like that), and I actually need some new features. My laptop is Lenevo Y550, graphic card is Geforce 130m. Few months ago my laptop was at Lenovo service, because graphic card was overheating (there was a problem with a fan and it was replaced), and the problem started happening before that. It is worth noting that the problem occurs only when using Windows (using Internet, starting some applications etc), but never when I play any game, so I don't think the card is overheating again (especially since it is not simply powering down, like before. Do you have any idea what's the problem might be?













Solved!

Go to Solution.

Answer:Nvidia Kernel Mode Driver Problem

you should use lenovo's driver instead of.

7 more replies
Relevance 56.99%

Does anyone know of an alternative to the very slow ATI Radeon Kernel Mode Driver? It is slow and causes general annoyances. Apparently also has a security issue.

Windows Vista Ultimate X64
HIS ATI Radeon X1950XTX
 

More replies
Relevance 56.17%

Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.

Answer:Event 441, Kernel-PnP

Originally Posted by xbatman139


Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.



I have the same problem with my new headset. There is no way to get it activated with new headset.
Hope for help!

10 more replies
Relevance 56.17%
Question: Kernel Event 41

Hello,

Ever since I have upgraded to Windows 10 I have been getting this Kernel Event 41 issue where my computer abruptly shuts down, no BSOD. As far as I know, this issue only occurs during high loads in CPU/ GPU demanding games.

This issue occurs in the following games:

- Star Citizen
- Planetside 2
- ArmA 3
My temperatures are stable during gaming and never goes above 62 Degrees. Therefore can someone here please identify what is the cause of the problem and what can I do to permanently stop this incredibly frustrating issue from occurring again.

Specs:

Intel Core i5 4690K (not - overclocked)
Corsair Vengeance 4 x 4GB (16 GB total) RAM
Corsair CX 750M PSU
Asus Maximus VII Hero Motherboard
Corsair H100i cooler
Corsair 450D case
Seagate Barracuda 2 TB HDD
Crucial MX100 256 GB SDD (OS is installed here)
Gigabyte Windforce GeForce GTX 970 4GB
Asus DVD RW Optical Disk Drive
Asus PCE AC68 Wireless Adapter

More replies
Relevance 56.17%
Question: Kernel event 41

Starting a week ago, my PC began crashing due to a Kernel_Data_Inpage_Error.

This occurs at seemingly random times (i.e. not when it wakes up from sleep, etc.) and try as I might, I have not been able to successfully troubleshoot the issue.

I attached the data retrieved from the SF Diagnostic Tool. Please let me know if you need any additional information.

I greatly appreciate any help!

Answer:Kernel event 41

The reports aren't complete. Please rerun the data collection app and let it run for at least 15 minutes (or until the app itself says that it's done).
Then zip it up and upload it with your next post.

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.





Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053



Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NETwNe64.sys Tue Dec 6 12:48:39 2011 (4EDE5577)
Intel? Wireless WiFi Link Adapter driver
http://www.carrona.org/drivers/driver.php?id=NETwNe64.sys

STOP 0x7A errors ( BSOD Index ) are mostly hardware. If stopping the overclock doesn't fix it, then please run these free hardware diagnostics: Hardware Diagnostics Let us know the results and we can move on from there.

Analysis:
The following is for informational purposes only.

Code:
**************************Sat Sep 14 17:27:43.704 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091413-35000-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win... Read more

13 more replies
Relevance 56.17%
Question: Kernel Event 41

Hello,

Ever since I have upgraded to Windows 10 I have been getting this Kernel Event 41 issue where my computer abruptly shuts down, no BSOD. As far as I know, this issue only occurs during high loads in CPU/ GPU demanding games.

This issue occurs in the following games:

- Star Citizen
- Planetside 2
- ArmA 3
My temperatures are stable during gaming and never goes above 62 Degrees. Therefore can someone here please identify what is the cause of the problem and what can I do to permanently stop this incredibly frustrating issue from occurring again.

Specs:

Intel Core i5 4690K (not - overclocked)
Corsair Vengeance 4 x 4GB (16 GB total) RAM
Corsair CX 750M PSU
Asus Maximus VII Hero Motherboard
Corsair H100i cooler
Corsair 450D case
Seagate Barracuda 2 TB HDD
Crucial MX100 256 GB SDD (OS is installed here)
Gigabyte Windforce GeForce GTX 970 4GB
Asus DVD RW Optical Disk Drive
Asus PCE AC68 Wireless Adapter

More replies
Relevance 56.17%

Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.

Answer:Event 441, Kernel-PnP

xbatman139 said:

Hi All,

This problem shows when i've upgraded to WIndows 10, due to this problem. i've revert back to windows 7. This was not encountered while using windows 7.

It seems like the system was not able to detect the audio output even thou its been installed.

Device HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_10431AD3&REV_1001\4&23c09310&0&0001 could not be migrated.
Last Device Instance Id: BTHENUM\{61118058-486c-4bb0-b4b8-ace4dcadec44}_LOCALMFG&0000\8&1a368771&0&000000000000_00000000
Class Guid: {4d36e96c-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

Kindly assists me on this ... Thanks.



I have the same problem with my new headset. There is no way to get it activated with new headset.
Hope for help!

9 more replies
Relevance 56.17%
Question: Kernel event

Greetings,
I have Windows 8 64 bit installed on a new Hp h8 1360t . On each restart I get this error.
"PKU2u log failed to start with the following error: 0xc0000035".
The results of my searches to resolve this error has been minimal to say the least.
I have run sfc/scannow and a chkdsk /r with no positive results.
If anyone can give light to this error and how to correct it would be greatly appreciated.
Thank you,
Richm

Answer:Kernel event

Please read this post. Would be the same for Windows 8
Kernel Event Tracing error: 0XC0000035 - Windows 7 Help Forums

5 more replies
Relevance 56.17%

Hi I'm having a problem - I can't install any software as I'm getting the error message 'Failed to load DLL 'shfolder.dll'.
I searched through similar threads and have tried to copy the shfolder.dll file directly into my system32 folder but I get the message: 'Cannot move shfolder. A file with the name you specified already exists.'
I've searched manually in the folder and with Windows' search facility and the dll isn't in there. Anyone any idea what's going on?

Answer:Problem: Failed to load DLL 'shfolder.dll'

Open Windows Explorer tools > options > view > uncheck 'hide protected system files'
You should atleast be able to see the dll now :)

8 more replies
Relevance 56.17%

Hi guys, I come to you like the guilty little children do... I had a Spyware problem which I solved with Lavasoft Ad-Aware 2008, but now I have this little boring message appearing at every startup.I know the cause is a process which should not be run, but what one?Hope you may help finding it out...Thank you,Fabio from Milan Logfile of Trend Micro HijackThis v2.0.2Scan saved at 18.53.04, on 05/02/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16762)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Programmi\Lavasoft\Ad-Aware\aawservice.exeC:\WINDOWS\system32\spoolsv.exeC:\Programmi\File comuni\Acronis\Schedule2\schedul2.exeC:\PROGRA~1\SYMANT~1\SYMANT~1\DefWatch.exeC:\Programmi\NVIDIA Corporation\NetworkAccessManager\Apache Group\Apache2\bin\apache.exeC:\WINDOWS\system32\svchost.exeC:\Programmi\Java\jre6\bin\jqs.exeC:\Programmi\File comuni\Microsoft Shared\VS7DEBUG\MDM.EXEC:\PROGRA~1\SYMANT~1\SYMANT~1\Rtvscan.exeC:\Programmi\NVIDIA Corporation\NetworkAccessManager&... Read more

Answer:"Hook load failed" DLL problem

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a description of your problem, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results, click no to the Optional_ScanFollow the ... Read more

3 more replies
Relevance 56.17%

My computer fails to load windows and keeps restarting at the point of the windows load screen.

When I started my computer, I got a pop-up saying AVG needed to restart the computer for an update. After the restart, the Windows Repair screen came up saying windows failed to load. Startup Repair tried to automatically fix the problem, which was taking a while, so I turn on my laptop. I saw the same AVG update pop up, and I wasn't yet suspicious of it so I restart my laptop as well. Unfortunately the same thing appears on the laptop.

The auto repair worked on the laptop but it failed on the desktop. Now the desktop acts as I've described above: it restarts every time it gets to the Windows loading screen. Running in safe mode does nothing. Trying a system restore (to yesterday, when it was working fine) does nothing. When the laptop restarted to normal, I got the AVG update window again, which I'm ignoring for now.

Both computers run Win7 Home Premium x64.

If it's any help, here's the desktop's Startup Repair problem details:





Quote:
Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21201068
Problem Signature 05: AutoFailover
Problem Signature 06: 4
Problem Signature 07: NoRootCause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Answer:Windows failed to load, problem may be AVG?

My mother just called me with this same issue on Vista x64. After updating AVG it crashes and is stuck in a reboot cycle.

Good one AVG, now I have to go over there and fix her computer... This is not what I planned on doing this weekend :/

9 more replies