Computer Support Forum

How to find Drivers using Hardware IDs

Question: How to find Drivers using Hardware IDs

I have windows7 unidentified "blue-tooth dongle some parts. How do i find drivers for it using hardware ID?

Relevance 100%
Preferred Solution: How to find Drivers using Hardware IDs

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: How to find Drivers using Hardware IDs

This tut saves me the work of making snips.

How To Find Unknown Device Drivers By Their Vendor & Device ID

2 more replies
Relevance 63.14%

Hi everybody,

I have reinstalled the windowXP of my desktop and I am not able to find the drivers of my sound card and graphic card.

I have used device manger to search it on internet but it couldn't find any.
Could anyone tell me how to find these drivers or what software can check all my drivers, please?

Thank you very much
 

Answer:how to find all hardware drivers?

Download "Everest Home Edition" & install ... it will tell you what cards you have and probably give you a link to their home site for divers.

If not, then at least you'll be able to tell us what they are ...
 

7 more replies
Relevance 62.32%

my astranet ia101 scanner has a problem. i need to reinstall it to my pc, because of a hard drive crash and the techs had to wipe and reformat my drive, so i have to put everything back on it. i have reinstalled it before many times with no problem, but this time for some reason, my computer won't find the device driver for it now. i installed it with my disc that came with the scanner, and i also tried with a download from the umax website. when i restart my pc, windows recognizes that there is new hardware, but cannot find the driver. when i click on the vistascan icon, it tries to find it, but says, error, scanner access failed. everytime i run the windows add hardware wizard, it says cannot locate drivers for the scanner. the windows hardware wizard always asks me to put the windows 98 cd in, but the drivers aren't there. they are on the scanner cd and on my computer somewhere. after i installed the vistascan from the disc, it said successful install. the vista shuttle and the copy utility are fine- just the vista scan. how do i solve this? i have windows 98 on my pc.
 

Answer:win98 won't find hardware drivers

Have you used the "have disk" option and directed the path to the driver on the installation CD?
 

1 more replies
Relevance 62.32%

The add new hardware wizard is not finding new drivers on cd.The drivers are there. Using win98 and trying to install Creative Blaster USB modem V92 on friends machine.

Answer:Add New Hardware Wizard does not find new drivers

Browse the cd and point 98 to the drivers.

1 more replies
Relevance 62.32%

I would like to install Linux on my PC as a dual-boot system with Windows XP but after checking many websites I can't find any drivers for my Gigabyte GA-6WMM7 Motherboard or my Intel 810 chipset, among other things. I wondered if anyone here knew the location of these drivers or if there is a generic driver that will work for all these. Most of my other hardware will work, but i'm not sure about my Celeron II 700Mhz Processor. Any help would be appreciated.

Answer:I can't find Linux drivers for my hardware!

Have you seen this useful site click here

5 more replies
Relevance 61.5%

Can anyone help me help my girlfriends parents computer!Im not sure what some one done it has been running fine for the 2 years or so they have had it, but they asked me to look at it, and when you go to boot it up at the moment it says its found new hardware but cannot find the drivers. It doesnt say what the hardware, and says that you can choose to finish anyway, but when you do tey screen goes to the wallpaper but nothing else loads up? no desktop or anything. I booted in safe mode and could get in that way but still cannot find the prob. I just wondered if anyone had any suggestions before i pop the recovery disks in and wipe it!!It Win ME by the way.

Answer:New hardware found on startup, cant find drivers..

in Device Manager for any yellow exclamation marks - might give you a clue to what the hardware is.

2 more replies
Relevance 61.5%

If your computer is running a beta version of the Windows? 7 operating system, the following information can help you select the correct beta software to download for your Microsoft Hardware product.
For the best Microsoft Hardware device and software performance, it?s essential to install all of the important and recommended Windows updates from the Windows Update site. Microsoft Hardware Windows? 7 Support

Answer:How to Find Windows 7 Drivers for Microsoft Hardware

Yesterday I installed windows 7, and I only installed windows update... and no driver was required. Graphics card, sound card, LAN card etc. were automatically installed.

3 more replies
Relevance 61.5%

So, my computer suddenly started finding a handful of devices it can't find drivers for. I didn't add any new hardware. After trying all I could think of I resorted to trying a clean install. Sadly that did not help.

Can someone advise me on where to begin to diagnose this problem? Obviously I'm not very experienced with this.

I'm sure you'll need more information to truly help with this, but I'm not sure what to provide or how to obtain it.

Answer:No new hardware, can't find drivers even after clean install

Please provide more information. What do you mean your system is finding devices for which it can't find drivers? Please explain IN DETAIL.

Also, after the clean install did you download and install the chipset driver followed by all other appropriate drivers? Look in device manager - any yellow or red symbols?

8 more replies
Relevance 61.5%

PC with Windows ME. When instaling new hardware, system searches for drivers and frequently fails to find them, apparently because it is looking in the directory. For example, I was installing a USB linked magnetic card reader and the following message appeared in a window headed 'New Hardware Found'."File USBNTMAP.SYS was not foundWindows needs the disk labelled Windows Millenium Edition to continue. This disk may be provided by your computer or device manufacturer.Copy files from C:|Program files\Creative\....."If I then use the browse button to point the system at C:\Windows\system32\driversit sometimes works, and anyway the files it is looking for are invariably some within the Windows directory.Is there any way I can get the system to look in the right place automatically in stead of looking in the Creative soundblaster directory for a standard Windows ME driver??!!??Any help will be gratefully received.MJ

Answer:New hardware instal fails to find drivers

sorry i dont know why its not working.i would download them from the manufacturers website that way you will get the latest version of the driver.the ones on the disc will be out of date.

3 more replies
Relevance 61.09%

i reformated a friend pc... when i start up pc needs to find drivers for unknown device.. go to device manager and its listed under other drivers - unknown device.. ive been to the compaq site and dowloaded all drivers but nothing seems to work... any ideas.....how can i find what the device is...ect.... thanks for your help

ps.. there are no cd's with drivers that came with his pc...
 

Answer:compaq presario sr1834nx cant find drivers for hardware

Hi, try this

http://www.instantfundas.com/2008/06/how-to-find-drivers-for-unknown-devices.html

Bill
 

1 more replies
Relevance 61.09%

I uninstalled both my DVD drive and my CD drive and rebooted my computer, in device manager it says drivers were properly installed but cannot find the hardware (both drives). They have power, because they open and close...I do not know what to do...are both drives bad?   (using Windows XP, HP computer)

More replies
Relevance 61.09%

Does anyone know how I can disable the autodetect new hardware and auto search for drivers in windows XP pro?

I am trying to install my new TV tuner and the installation program keeps being interrupted by windows auto-features, chrashing my system....

could anyone help me out so i dont have to search for the feature myself?

thanks
 

Answer:Disable auto-find drivers/ autodetect new hardware in XP

I can't tell you how to disable this [email protected]#%$%%* function, however I was able to install my Creative drivers thus

Boot into safe mode F8
Delete driver
Insert your CD and
XP should ask you where to d/l driver from when you reboot. and send it to your CD.

HTH

augie
 

1 more replies
Relevance 61.09%

Hi all, until last night everything was ok. After I'd cleaned the computer and plugged everything back in windows decides it can't find drivers for any of my usb devices (keyboard, mouse, camera, gamepad, joystick).

When it finds them it says new hardware found. with 3 choices:
Locate and install driver
Ask me again later
Don't show this message again

So I click the first option, and it searches for drivers but...'Could not find driver software'. I then click 'Check online for a solution' with no luck.

These devices are so basic that the manufacturers don't supply drivers for the products; they should all be with the OS.

What can I do guys? I'm a keen photographer and not being able to upload my photos via the camera or card reader is a real issue for me.


By the way the above process happens for all the usb hardware I have except the printer, usb flash drive, mouse and keyboard (luckily!)

Answer:Vista can't find its hardware drivers, Most usb devices won't install

in the device manager click on view at the top and show hidden devices
then uninstall all usb listings
turn the computer off and unplug all usb
reboot twice and replug in usb

1 more replies
Relevance 60.27%

I am running Windows XP. And my hardware wizard can't find the drivers or the program for installing multi media audio controller. Is this something I can install from the Windows XP cd?
 

Answer:Solved: Installing Hardware Wizard can't find drivers for speakers

9 more replies
Relevance 50.02%

I reinstalled WindowsXP in my computer recently. I downloaded DriverMax and the result of uninstalled hardware is as under:HSP56 MR (VIA)Manufacturer Conexant Hardware type Modems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % FMV-FX52Z2(A)Manufacturer Fujitsu Hardware type Modems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % Motorola SM56 Data Fax ModemManufacturer Motorola Inc Hardware type Modems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % Motorola SM56 Voice ModemManufacturer Motorola Inc Hardware type Modems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % HSP56 MRManufacturer PCtel Hardware type Modems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % HSP56 MR (VIA)Manufacturer PCtel Hardware type Modems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % HSP56 MR (VIA)Manufacturer PCtel Hardware type M?dems Hardware class Modem Hardware ID VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80 Vendor ID 1106 Match probability 100 % How to proceed further how i can know which is my Modem amongst all above so that i can... Read more

Answer:how to find a hardware make and model to find driver

Clik Here...

2 more replies
Relevance 47.56%

Is it better to use the drivers provided by toshiba (nvidia, synaptics,...) or should i install it from the official hardware manufacterer as they have more recent drivers than the one on toshiba site.

Answer:Question about drivers (hardware manufacterer vs toshiba drivers)

Generally speaking the drivers from Toshiba page should be used since such drivers are tested by Toshiba.
For example the display driver from Toshiba supports some kind of overheating protection and clock down the GPU if the temperature would be too high? in such case the performance would be decreased for a short time but this would lower the temperature? as far as I know the drivers from chip manufacturers don?t support such feature?
So the usage of such drivers is your own risk?

At the other hand you can install Synaptics drivers from manufacturer page. There is no risk.

3 more replies
Relevance 46.74%

Hi there,

I have an HP Pavilion DV7 2185dx laptop running a freshly installed windows 7 upgrade from windows Vista. Ever since the upgrade my CPU is constantly running at 98-100% all the time meaning I cannot do anything on my PC. After researching a bit online it could possibly be the driver errors I see in device manager?

In device manager I see that I have some drivers missing and all attempts to update these have failed and i've seen other users here post the missing drivers and be directed to the fixes.

Device type: Other Devices
Manufacturer: Unknown
Location: PCI bus 6, device 0, function 1

PCI\VEN_197B&DEV_2382&SUBSYS_3624103C&REV_00
PCI\VEN_197B&DEV_2382&SUBSYS_3624103C
PCI\VEN_197B&DEV_2382&CC_088000
PCI\VEN_197B&DEV_2382&CC_0880

Device type: Other Devices
Manufacturer: Unknown
Location: PCI bus 6, device 0, function 3

PCI\VEN_197B&DEV_2383&SUBSYS_3624103C&REV_00
PCI\VEN_197B&DEV_2383&SUBSYS_3624103C
PCI\VEN_197B&DEV_2383&CC_088000
PCI\VEN_197B&DEV_2383&CC_0880

Device type: Other Devices
Manufacturer: Unknown
Location: PCI bus 6, device 0, function 4

PCI\VEN_197B&DEV_2384&SUBSYS_3624103C&REV_00
PCI\VEN_197B&DEV_2384&SUBSYS_3624103C
PCI\VEN_197B&DEV_2384&CC_088000
PCI\VEN_197B&DEV_2384&CC_0880

Device type: Other Devices
Manufacturer: Unknown
Location: on Intel(R) ICH9M LPC Interface Controller - 2919

ACPI\ENE0100
*ENE0100
So if the updated dr... Read more

Answer:Base System Device drivers error - unable to find drivers

Have you downloaded the Windows 7 drivers from the HP site.
Link: Software & Driver Downloads HP Pavilion dv7-2185dx Entertainment Notebook PC - HP Customer Care (United States - English)

7 more replies
Relevance 46.33%

I contacted SONY and they told me that they did not have the drivers for this Hardware. They told me I needed a WINDOWS driver. My operating system is Windows 98. Help
 

Answer:Not Going to Sleep Until Find Drivers..Need Windows Drivers SONY CD-R/RW CRX140E

You already posted this same question in hardware.
Keep it to one thread.
 

1 more replies
Relevance 45.92%

HI, I just bought one P100-10P for gaming. It comes with Vista, but a lot of games don't run on this OS, so I want to install XP.

The XP drivers I downloaded from Toshiba are working only for some components, and I dont't know what to do...
It seems right now I have a very expensive typing machine:)
Any ideeas?

Answer:Satellite P100-10P: Some XP drivers don't work - Where to find new drivers

Hi

For most Vista OS notebooks the XP drivers are not available or it???s not easy to find the right drivers.
But what XP drivers are you looking for?

The Satellite P100-10P is belongs to the PSPAGE series!
I checked the Toshiba driver page and found all necessary XP drivers!!!
So what???s the problem?!

9 more replies
Relevance 44.28%

I have a program from my friend that needs the hardware id, it works fine on windows XP but it wont work on my laptop which has windows 7. I would use his but seeing how hardware id is unique to each PC i was wondering how i could get it?

Thanks
 

Answer:How do i find my Hardware ID?

If you mean the IP address try the following from the Help section on Ip Address.
Control Panel, Network Connections
Select an active network connection, and then, in the toolbar, click View status of this connection. (You might need to click the chevron to find this command.)
Click Details.
Your computer's IP address appears in the Value column, next to IPv4 Address.
Click to expand...
 

3 more replies
Relevance 44.28%

Hey. I'm looking to upgrade my brothers' computer. I need a new mobo, CPU, and some RAM modules.

Now, I know I can go to newegg myself and look there, but I also know that you guys are pros when it comes to this, and I'd like the best bang for my buck. So I'd appreciate it if you could help me find the best deals out there (from newegg).

Ok, so for mobos, I prefer AMD-based socket 939 (please no AM2--just 939) and exactly 1 PCI-E x16 slot (for later upgrading). For now, they'll be using onboard video, though, so make sure that that's at least mediocre.

For CPU, any 939 Athlon 64 will do.

And finally, for RAM, just please have it be compatible with the mobo. No more than 512MB is needed (again, at least just for now. 3-4 sockets for RAM is preferred).

In total, I don't want to spend any more than $225 including S&H, excluding mail in rebates.

Thanks, dudes.
 

Answer:Please help me find some hardware

9 more replies
Relevance 44.28%

Every time I boot up windows it attempts to find new hardware as follows:-

PCI Media device
PCI Emulation
PCI Gameport

It finds them ok except for the Gameport joystick which has an exclamation mark next to it in device manager.

Any ideas?

Many thanks

Dave
 

Answer:Find new Hardware ???

The gameport drivers usually load with the soundcard drivers. Try downloading the newest sound drivers from your SC manufacturer and see if it fixes the problem.
 

1 more replies
Relevance 44.28%

i have a dell latitude d610 and i have trouble finding one driver for it in device manager called the pci simple communications controller. can anybody help me find it I've spennt about 5 hours searching for it but can't find it can you give me a direct link to it?

Answer:can't find hardware help

this is all i have been able to find for you see here: http://en.community.dell.com/dell-groups/n...4/19399078.aspx

2 more replies
Relevance 43.87%

HOW TO FIND OUT WHAT KIND OF HARDWARE YOU HAVE WITHOUT OPENING YOUR COMPUTER'S CASE

Here is a tutorial on how to find out some information that is very useful when upgrading or troubleshooting your computer

The first section is the steps needed to find out what hardware you have and will give a list of things to include when asking for advice about your computer.

The second section will list the steps to use DirectX Diagnostic Tool to determine your type of Video Card

--------------------------------------------------------------------------------------

Section 1: Obtaining and using CPU-Z to gather system information

Section 1a: Obtaining and using CPU-Z

1) Go and download CPU-Z.

2) After downloading CPU-Z extract the contents of the .zip file, and put the extracted files where you can easily access them.

3) Double-click the cpuz.exe file.

4) Now that CPU-Z is open, you can click on each tab to find out specific information about your computer.

Section 1b: What to list when asking for advice

In the following section list the information that pertains to your query. For example, if you are upgrading your CPU, list the relevant information from the CPU Tab.

CPU Tab:

Processor Specification
Processor Code Name
Core Speed
FSB
Bus Speed

Mainboard Tab:

Motherboard Manufacturer
Motherboard Model
Graphic Interface Version
Graphic Interface Transfer Rate

Memory Tab:

Type
Size
Frequency

--------------------------------... Read more

Answer:HOW TO: Find out what kind of Hardware you have.

Might wanna put this in the Tutorials Section (although it doesn't get much traffic)

http://www.techist.com/forumdisplay.php?forumid=68

9 more replies
Relevance 43.87%

I cant find were to go when i am trying to look for like video cards, and all comp. perfomances. PLZ HELP, THX
 

Answer:How to find windows mce hardware

Welcome

Perhaps you might want to say a little bit more about want you are looking for or want to do if you want to get some responses.
 

1 more replies
Relevance 43.87%

My computer has been playing up for a while, I just got a CD which should find out which piece of hardware is defective, do I have to boot up from CD through the bios (and if so how to do that) or do I boot up into windows first and play the CD normally?The CD is called Ultimate boot cd.Thank you.

Answer:How to CD to find out which hardware is playing up

As far as I can see click here is not really a tool for an 'Absolute Beginner'.If you want to run it you will need to set the BIOS to boot from the CD drive click here then restart with the CD in the drive.

10 more replies
Relevance 43.87%

I am getting ready to slick my NT system because I can not get any of my administrative tools to work. I don't know what else to do.

So what I want to do is reinstall NT but I do not have any of my system drivers(computer was given to me)

Is there a way I can find out what hardware I have in it?

Another quick question..my NT is a standalone not connected to a network..When I go into User Manager.. I get the error message "The network path was not found." "Do you want to select another domain to administer?"

What can I do?
 

Answer:{Resolved} - How can I find out what hardware I have?

Greetings

OK...

Are you logging onto the NT machine with an account that is in the local administrator's account?

From the sound of things, it seems like you have been given a computer that has NT SERVER on it, and was once on a network LAN.

Once you are logged into the machine with a local administrator's account, you need to access the control panel, and slowly go through the different icons to find what drivers have been installed for the different hardware components. In NT4, there is no one area for this, like in Win9x. You need to look in the Multimnedai applet for your sound card, the network applet for your network card, the display applet for your screen card, the modem applet for your modem, the printer applet for your printer...

As for the User manager for Domains question... Click on the YES button, and type in your Computer's name. That will connect you top the local User manager.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Every morning is the dawn of a new error...
 

3 more replies
Relevance 43.87%

New DSL and (alleged) network installed. The "network tech" left us with 1 computer able to access the copier for printing and two able to use the internet, I have managed to convince my XP machine that it is on a network and can access the 98 machine and copy files etc. However the 98 machine can't browse the network and the Wizard disk from my machine states that windows can't find the hardware on the 98 machine. I get this from ipconfig /all:

Windows 98 IP Configuration

Host Name . . . . . . . . . : dell1.domain_not_set.invalidD

DNS Servers . . . . . . . . : 209.40.66.10

209.40.64.1

Node Type . . . . . . . . . : Broadcast

NetBIOS Scope ID. . . . . . :

IP Routing Enabled. . . . . : No

WINS Proxy Enabled. . . . . : No

NetBIOS Resolution Uses DNS : Yes

0 Ethernet adapter :

Description . . . . . . . . : Intel(R) PRO Adapter

Physical Address. . . . . . : 00-03-47-CE-BF-99

DHCP Enabled. . . . . . . . : Yes

IP Address. . . . . . . . . : 192.168.1.3

Subnet Mask . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . : 192.168.1.1

Primary WINS Server . . . . :

Secondary WINS Server . . . :

Lease Obtained. . . . . . . : 06 07 06 12:42:30 PM

Lease Expires . . . . . . . : 06 08 06 12:42:30 PM
 

Answer:Net Wizard can't find hardware

6 more replies
Relevance 43.87%

I reformated my computer today and this message would come up when i try to play a song, I checked device manager and I dont have any known sound cards besides some drivers "PlayCenter could not find the necessary hardware or drivers to execute properly. Make sure your hardware and frivers are setup correctly."

Answer:PlayCenter could not find the necessary hardware?!! HELP

go to the creative download section and d/load the software and drivers for the card and install them
this will tell you what card you have
http://pc-wizard-2008.en.softonic.com/

11 more replies
Relevance 43.87%

I have never done It before I know you can over clock the videocard (mines a nvidia geforce8800gt) someone told me gateway made me unable to change my mother board so i think that takes the processor out but what about ram and the hard drive? I dont expect a step by step guide (id like one tho but I just want a link to a guide what makes it the hardest is I do not even know the name or brand of my ram or hard drive (I even looked on gateway and couldnt find it) device manager doesnt have it either. any other things that can be overclocked I would appreciate as well. The only thing I found a good amount of info on is cooling. Thank you for your time..

Answer:Where do I find a way to overclock my hardware?

Quote from: doc_holliday420 on August 24, 2008, 02:55:10 PM someone told me gateway made me unable to change my mother board so i think that takes the processor out but what about ram and the hard drive? If your BIOS doesn't allow you to set CPU parameters, it is doubtful that you can (or should) overclock the RAM. There is no overclocking for hard drives.Overclocking is science and art! You have a nice system based on your other topic - my advice is->don't screw with it! Perhaps you could benefit from another video card, see what advice you get. Best of luck!

5 more replies
Relevance 43.87%

I have a T43 that was agonizingly slow. Being a nontechnical sort (compared to you) I reloaded XP Pro (SP2) from a newly purchased distribution. I downloaded the Broadcom driver using another machine, copied it to the newly rebuilt one, and installed the driver there. The operating system still says there is no internet hardware. Any suggestions?

Answer:Reloaded T43 with XP Pro, can't find hardware

Welcome to the forum! Downloading the driver is only the first step in the process. After the download is complete, the driver must be unpacked from C>Drivers>Win>Ethernet. Posting the 7-character model number of your T43 (either 26??-??? or 187?-???) would help us assist you better. Good luck and keep us posted.

1 more replies
Relevance 43.87%

Hi

I recently purchased a video capture board and i'm encountering a familiar problem, the software cannot find the hardware, the software simply starts and says "cannot initialize hardware" this also happened with a soundcard i brought AND my graphics card, although working, when the drivers cd is inserted a message like "hardware not detected" comes up. I am at my witts end with this and would really like some advice

Thanks

R.B
 

Answer:Software can't find Hardware :(

6 more replies
Relevance 43.87%

Hey there my fellow tech heads.
I am in need of a new case for my motherboard (Socket 775);

Motherboard
Manufacturer Acer
Model FG965M
Version R01-B0
Chipset Vendor Intel
Chipset Model P965/G965
Chipset Revision C2
Southbridge Vendor Intel
Southbridge Model 82801HH (ICH8DH)
Southbridge Revision B0

BIOS
Brand Phoenix Technologies, LTD
Version R01-B0
Date 06/18/2007

One that will fit this and enable me to have more fans to keep a new GPU I will be buying cool.
My current default Acer Aspire E700 case is far too small and will get hot far too quickly!
Please help me find a case as I don't really know what I'm looking for?!
Thanks, Jay.
 

Answer:Help me find a case that will fit all my hardware in?

7 more replies
Relevance 43.87%

Any one please help, i just recently had my xbox 360 stolen I ran it on a wireless network, I know the Mac address and whomever stole it used it and logged into my network which tells me they are near me. I suspect they changed the host name and may be using a new IP address since I know they have still been logging online based on my gamertag activity. is there any way to trace my mac address by scannig the local wireless networks? that way I can catch the *******s....PLEEEASE HELP.
 

Answer:Find hardware using MAC address

If they are logging onto your router, then no. If they log onto their own network, then you can ask one of the game servers to ask for the IP address that logs onto the servers and then you can give the info to the Police, which can get the information on the user from the IP address.

However I don't think the person will be too far from you as the wireless range won't be that far out.

Was this at home, school, etc?
 

2 more replies
Relevance 43.87%

I know there are lots of threads about the same thing. But ive looked.. for the last few hours and I'm stuck. I have a Dell dimension 5000. xp.
Just got a friend to reinstall it. Now its not even listing ethernet on the device manager. Downloaded the chipset and the network driver off the dell website but it still isnt working. Currently having to download things onto a memory stick and transfer between computers 2 floor apart. fit i am going to be. Any help would be amazing as im going insane. Thanks
 

Answer:Cannot find network hardware

did you get a Restore CD with the laptop
Dells often have a partition which you can restore from
Note sure but I think taping F10 on boot goes to that partiion,

One of the above should restore the PC to the factory settings with all drivers

Otherwise the drivers off the website should work
 

1 more replies
Relevance 43.87%

Im looking to build my own PC and I have a fair idea of the parts I need and want. What im finding difficulty with is chosing the RIGHT ones for the job. Are there any sites or people I can talk to, to find out if what I have in mind will operate like perfect clockwork?Thanks

Answer:How do I find out the compatibility of hardware?

click here

1 more replies
Relevance 43.87%

Hello all,

I just reinstalled Windows XP, with Service Pack 2. Now, for some reason, the computer doesn't seem to realize it has a wireless card, and does not automatically join networks. Then, when I go to "Network Setup Wizard", I get a "cannot find network hardware" error.... what happened?

Thank you all,
Michael
 

Answer:Cannot find network hardware?

6 more replies
Relevance 43.87%

i had restore my pc. and made sure that had MOBO driver installed but it still say's cannot find network hardware. any clues'
 

More replies
Relevance 43.87%

Where can I find the specs on the hardware of my Laptop? Type of HDD how many HDD slots, RAM upgrade capacity, etc?Thanks for any help

Answer:Where to find info on hardware

15 inch notebook have a single hard disk bay. Use google as I did. The following document has the specifications of your notebook.http://support.hp.com/us-en/document/c05216563 

1 more replies
Relevance 43.46%

Hi, I have installed Windows 7 Professional using DVD and it worked. However now the Issue I face is with the drivers. I was somehow able to install the realtek Ethernet LAN drivers and it worked. However am not able to find a compatible USB driver and Wireless LAN Driver for my HP Notebook 15-ay503tx. I tried Intel Wireless LAN driver and its not working. Can you please help me with that.  Thanks, Vidhu V S

Answer:Not able to find USB 3.0 drivers and Wireless Lan Drivers

Hello VidhuVS, FOR USB 3.0Download, unzip and run the setup application from the link below... https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...  Provide the hardware ID for W/LAN :http://www.wikihow.com/Find-Hardware-ID   Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

2 more replies
Relevance 43.46%

I just bought an Acer Aspire E5-571. When I go to acer's driver and manual wen page, I choose the product, it starts searching, and says "service unavailable". How can i fix it, or acer fix it on their web site?

Answer:E5-571 can't find any drivers on drivers acer web ...

Hello, There are currently malfunctions on the servers. The technicians are looking for the causes/issues.You can try to download later. Note:Information from the Acer team. 

3 more replies
Relevance 43.46%

HI
I havs an hp dv52360m which had windows xp media edition,I install windows vista ultimate and i can't find any sound driver compitable with it,Am gettiing the error message on the audio icon in system tray (NO Audio Output Device Is Installed)I tried installing the xp drivers and updating,the HP website was not any help either also contacted one of hp technicians with no luck please help.
 

Answer:can't find drivers for UAA drivers for vista please help

Hmmm... I just checked around for an HP dv52360m and it doesn't seem to exist. I think you have an extra number in the model number.... please post the correct model number, and adding an Everest report would be helpful too. More info about Everest is available here, and you can download it free from here.
 

4 more replies
Relevance 43.05%

I'm trying to make sure I have all the Right Drivers... But I wanted to find a program that can tell me each piece of hardware. I used Belarc Advisor... Its ok. But is there a better one?

Answer:Looking to find a Program to read all my Hardware..

Everest or SIW. Both are free downloads.

4 more replies
Relevance 43.05%

Hallo, I tried installing drivers from kxproject (3550) for my soundblaster 0060. Sound was working, and everything seemed fine, but it's either I'm unsure of how to setup the 'recording mixer' so that I can use my microphone, or it wasn't working? So I got rid of those drivers, and went with an older version of the drivers to see if that would help. ( 3548 )

Now, not only is nothing working for my soundcard after that, but it refuses to uninstall with both the default uninstaller ( which I tried first ) as well as the device manager. An odd woodpecker/repeating sound can be heard. If you click uninstall in the device manager on the different sound card parts, the sound card comes back & reappears. The odd noise is not stopped while doing this. I found that by clicking on the properties of the sound card, I was able to see that it used 'audio endpoint'.

I then went into system32, and deleted the 'audio endpoint' .inf files. Now that I've deleted one of the .inf files, it's now falling back onto a different .inf file it seems, and I have no clue as to what the name of this one is, as it isn't the same name as what it's now being given as ( generic software device. )

The soundcard used to be under 'audio inputs & outputs' but now is under 'software devices' in control panel.

What can I do to make this work on my system? Does anyone know how to locate the exact .inf files that the hardware is using so that I can delete them? Does anyone know how to setup the soundca... Read more

Answer:How to find .inf of your hardware? Soundcard issue

Unfortunately, you have made a mess where it will be literally impossible to install any driver for it now.

Suggest to run sfc /scannow from elevated command prompt to fix it and if not, clean install Windows.

(Another option is to copy what you deleted from an EXACT same Windows install from another machine and the replace it. Same build, same architecture, if you have one.)

Do not ever delete .inf files unless instructed to do so by someone with intricate knowledge. What you deleted is necessary for Windows. Anyone that knows better will never suggest to delete .inf files, unless in extreme rare cases, where it is impossible to install a driver otherwise. And never under any circumstance should a Windows .inf file be deleted.

1 more replies
Relevance 43.05%

There were a few apps about at one point which you could load up in Windows and they would give you a breakdown of the inner-workings of your PC, i.e. what processor, RAM, HD etc etc...

I've long since forgotten what the app was called and want to get some RAM to upgrade a friend's laptop... I do recall it going from a totally free app to one which required registration for the more advanced features...

Anybody able to help out?
Many thanks
 

Answer:How Can I Find Out What Hardware Is Inside My Laptop?

Try this EverestHome

http://download1us.softpedia.com/dl...16369/software/system/info/everesthome220.zip
 

3 more replies
Relevance 43.05%

Hi! I've been using Lenovo since this summer but I decided to install Windows 7 Ultimate instead Windows 7 Home Premium. I've downloaded drivers, but there are some troubles:1. I can't install Bluetooth driver. Installer informs: "Can not detect your Bluetooth hardware."(something like this, because I've got Russian Windows) and the only one button "Abort installation". Reset doesn't help2. When I'm installing Hotkey Features Integration, namely "On Screen Display", installer says: "An error occurred during copying the file "cleanup.dll"". This message appears when installer is copying pnpreg.dll, regcat.dll, tphklock.dll.PS sorry for my grammar)

Answer:Can't find bluetooth hardware on Edge 15

I solved problem with bluetooth. I'm waiting for solution of second trouble)

6 more replies
Relevance 43.05%

Dell
Windows Xp

So 2 days ago, i was having a problem with my computer, i would log in, and once my desktop came up, it would show for about 10 seconds, and then my icons and taskbar would dissapear. So i called dell, and they told me that most likely some spyware had leaked through and the best solution would be to reboot xp and start from scratch. So i go to do that and when the installation finished, i suddenly have no internet connection. I use a linksys router, and my laptop is connected to the router and gets a connection just fine.

So im guessing my problem is that when i go on my pc and go to the network connections screen, its empty. Wehn i try to set one up, i get the "Wizzard cannot find your network hardware" which is strange because before i re-installed, i had a working internet connection. If you have any tips, that doesnt require me talking to the useless folks at "dell-on-call" please help.

Be slow with me lol, im a beginner, i kno some basics, but if u tell me to do some crazy stuff, i will probably get lost =). So step by step please if u can help.

thanks
lee
 

Answer:Wizard Cannot find your network hardware.

6 more replies
Relevance 43.05%

Note: The printer's scanner worked fine on my cousin's netbook so I don't think its defective.

I recently bought a new printer which is also supposed to be able fax and scan. The printer works fine, but I am not able to scan. During installation there was an error ("Your new hardware might not work properly"). I opened up Device Manager and there you go, a yellow exclamation mark ! next to Lexmark 2600 under images and devices.
To fix the problem, I tried to update the driver from the installation disc. But it showed me the message "Wizard could not find a better match for you hardware than the one it already has"
I went to the Lexmark website and downloaded and installed the updates, followed the troubleshooter, and even chatted for an hour with a support operator. The instructions he gave me were the same thing I was already doing; try updating from the cd and the downloaded package from the site, install,uninstall, reinstall, try different usb port... but i got the same disappointing result; Wizard cant find a better match.

04:48:58 PM [Marco] I see. I apologize. That is correct. However, to be honest, I am not certain why XP is not allowing you to update using the downloaded package and the CD.
05:02:27 PM [Marco] I see. I apologize we have perform the necessary steps to have the printer updated, however the issue persists. There may be a software or Operating system policy blocking or not allowing the update.



Any help would be apprec... Read more

Answer:Wizard could not find a better match for you hardware than the one it already has

Hi from the user guide
MAKE SURE YOUR OPERATING SYSTEM IS SUPPORTED
The following operating systems are supported: Windows Vista, Windows XP, Windows 2000 with Service Pack 3
or later, and Mac OS X versions 10.5, 10.4 and 10.3.
CHECK THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON THE
PRINTER BOX
CHECK THE USB CONNECTION
1 Check the USB cable for any obvious damage. If the cable is damaged, use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.
RECONNECT THE POWER SUPPLY
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS
1 Close all open programs.
2 Disable any security programs.
3 Do one of the following:
• In Windows Vista, click .
• In Windows XP and earlier, click Start.
4 Click Computer or My Computer.
5 Double-click the CD or DVD drive icon.
51
6 If necessary, double-click setup.exe.
7 Follow the instructions on the computer screen to install the software.
8 When the installation is completed, enable the security software again
guide here http://www.lexmark.com/publications/...7649663_en.pdf
drive... Read more

10 more replies
Relevance 43.05%

I recently completed a clean install of Windows 7 on my laptop (Toshiba Satellite l655-s5150). However, I am unable to update my drivers as my computer cannot identify most of my hardware.
Under device manager it has "Other Devices" listed as "Ethernet Controller", "Network Controller", and "PCI Simple Communications Controller". All three have a yellow exclamation mark next to them and Manufacturer: Unknown.

Any advice would be appreciated.

Answer:Cannot Find Hardware After Clean Install

Go to Toshiba Support, click on the Download tab and enter your system details. Download and install the chipset drivers and then the remaining items should be recognised. You can then download and install the other missing drivers if Windows does not install them automatically.

8 more replies
Relevance 43.05%

Greetings.

I have a computer with integrated video. It appears the drivers are the wrong ones. Although it works, it doesn't work well. The refresh rate is pretty slow.. but it use to be fast before the user 'upgraded' the drivers. Roll back not possible. The problem here is that I have no idea what drivers to get. I went to the motherboard manufacturer with no luck. That is to say I downloaded their video drivers (with a setup.exe) and ran it but it told me I couldn't install the drivers. No reason given.

Maybe this is bigger than not knowing what drives the video on this system. I am open to ideas.

The motherboard is a KM400-M2 v1.0b which appears to be a ECS board.

any ideas? please be specific. I'm a little new to this.

Answer:Is there a way to find out what video hardware is in the system?

Did you try the drivers at this site? They list it as a sound driver.

4 more replies
Relevance 43.05%

hey everyone, I got a R61 (8932 - CTO) and I am running XP home.  I am trying to find the audio drive for this laptop. I scour through Lenovo support and downloads site.  I tried the Conexant High Definition Audio drivers and when I run setup, it gives me an error that it cannot find this driver. In Device Manager, i do not see an audio device.  I tried the ThinkVantage Updates and it does not show that I need a new audio drive to download. As on device manager it doesn't show anything, I do not know what the audio drive I need. When I go to this page => http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68153 and ran these upgraded: Universal Audio Architecture (UAA) High Definition Audio class driver (Q888111) for Windows XP with ... Universal Audio Architecture (UAA) High Definition Audio class driver (Q888111) for Windows XP with ...  At last, I am stuck...I am pretty sure the audio is coxeant audio device.   My questoin is: i) How do I find this device in my compii) How do i install the drivers to this device. Thanks!!

Answer:R61 - cannot find audio hardware and drive

Hello, is there a yellow exclamation mark at any deivce? It should be.Otherwise your have already installed one.Which SP (1 or 2) version do you use?

3 more replies
Relevance 43.05%

Hi one of my friend gave me pIII system. i have freshly installed windows xp sp2. while installing some files couldn't b copied. so i pressed skip to continue installation.installation is over.Now i could not find add hardware icon in control panel to install new hardware inmy system. plz help me out. is this the fault of my cd?

Answer:Add Hardware can't find in control panel

go start>run>type Hdwwiz.cpl

do u get the Add Hardware window?

2 more replies
Relevance 43.05%

I had some shareware programs that I wasn't using so I deleted them. After when I tried to play any audio or video the audio wouldn't work. I can get an .mpeg to play but no sound. Anything else like an MP3 tells me there is a errror and there is a problem. I tried going into the device manager - properties>Hardware>Device Manager etc... and found the yellow exclamation point so I deleted it and Rebooted and let windows detect the device- it would NOT detect the disk that I put in even when I pointed to it. So I tried to run the disk manually and it says after it installs that it CANNOT FIND ANY SOUND BLASTER CARD HARDWARE - HELP!!!!
Thanks everybody!
 

More replies
Relevance 43.05%

I can't find the web sites any more that I use when I would refer to them
to identify all kinds of hardware, like Motherboards, Video Cards, CPU's, Hard Disk Drives, and all the other types of hardware and Cards.

I have so much Hardware from older computers and would love to be able to ID them being I never marked them on what they were when I took them out of the the cases.

Can everybody please help and post back any information that can help me, web sites that you use and know of, thank you very much for the strong support like all ways, Joe

Answer:Please, Where Do I Find the Sites So I Can Identify Hardware?

http://www.belarc.com/free_download.html

2 more replies
Relevance 43.05%

Here is the rundown:

In mIRC/MSN/YAHOO/AIM I get disconnected randomly. I may be in a middle of a conversation in MSN and it will boot me out. In mIRC I may get BLOCKS of information (like 5 minutes worth) in approximatley 2 seconds, or just get disconnected.

I also cannot download anything above 20mb. It will stop at 5mb, 1.9mb, 18.5mb (totally random).

I currently have Comcast HSI. I run a Motorola Surfboard 5100 cable modem, plugged into a Linksys BEFSR41. Both cable modem and router are BRAND NEW.

Silly as it may seem, this is the 3rd router. We had a BEFSR41 before, but it would "die" on us, about once every other day, until we unplugged it, and replugged it in. Before this, we had a netgear router, which worked flawlessly, BUT COULDNT send e-mail. (Strangest thing, could GET e-mail, but couldn't SEND e-mail. EVEN THOUGH THEY BOTH USE THE SAME MAIL SERVER. I could even telnet and ping the outgoing mail server. Tried in outlook, firefox, mozilla suite, etc. E-mail keeps me in business, so I switched to that BEFSR41.

So it seems I just cannot get it right. I just purchased a Cisco uBR904 router, but I cannot get it configured correctly to do what I would like, so will probably be putting it up for sale.

Now, the Motorola surfboard 5100 is about 1 month old. The "new" BEFSR41 is 1 month old. Obviously this combination is not working. I DO NOT CARE HOW MUCH IT COSTS, I want a router that will work flawlessly with SB51... Read more

Answer:I honestly cannot find good hardware

Have you just tried running just the 5100 directly into your computer? That way it will be easy to tell if your really dealing with router issues or if its not something else, such as cable modem, service itself or computer configuration.
 

11 more replies
Relevance 43.05%

Hey there, firstly i'd like to say i really respect what you guys do helping all the clueless peeps like me, i've had various problems before and have solved them all through searching help threads here.

Recently my system had been playing up, random restarts, long boots, incredibly slugish and i was recommended to do a reformat of windows xp. Which i went ahead and did no problem. Now with the fresh system i am unable to make any connection to the internet.

When i go into the network setup wizard it says "The wizard cannot find your network hardware".

I use a router with a ethernet cable.
The cable is fine.
I've read around and hear i may need to install network drivers. Which i dont have a disk for.
I have no idea where to locate these drivers or what i need to download specificly
My motherboard is a "ECS 945G-M3 V3.0 Socket 775 Core 2 Duo Ready FSB1066 DDR2 Onboard Audio mATX"

Any assistance you could offer would be greatly appreciated.

I really have little knowledge of what i should be doing.

Thanks - A tired Josh.

Answer:Wizard cannot find your network hardware

Go to "system then hardware the device manager" if it does not shop there then go tot add & remove hardware, let the system try to find it. If the system does not find it try to go back and select it from the list, take your time it is not as hard as it may seem. Another point!!! You may need a driver, many drivers are available on the net from the maker, you will need the make/model number.
Added note if you find the net card in the device manager but with a yellow asterisk, right click a panel will open click on driver and try the update feature the driver may be on your windows disk!

6 more replies
Relevance 43.05%

I bought my Yoga 720-15IKB slightly used on eBay and did a clean install of Win10 immediately after receiving it. During this process, I noticed the recovery partition was empty, so I decided to format the entire drive and delete the recovery partition. After getting back into Windows, I noticed the usual methods of installing Nvidia display drivers weren't working, so I opened Device Manager and can't even find the Nvidia device in there under the generic "Microsoft Basic Display" name.I'm really worried the previous owner somehow fried the card. Does anyone have any ideas of how to get it working? EDIT: This is the first driver I've tried to install. Would installing the other drivers somehow make this device appear?

More replies
Relevance 43.05%

Hello, I am a little worried about my HP laptop. I really feel that someone install some kind of hardware keylogger in it. I am going to open my laptop but I still need to know what to look for. Can someone tell me how detect a hardware keylogger and how to remove it safely without damaging my laptop? I am using windows 7 32-bit, HP pavilion dv3 4048-tx. Thank you in advance for you help.
 

Answer:How to find hardware keylogger in laptop?

I don't know. But, you might watch http://forums.majorgeeks.com/showthread.php?t=285387 for comments.
 

7 more replies
Relevance 43.05%

I of course could just build one from scratch, but this is a recommendation for a friend for his business and they have to have a vendor-bought system. Now, I realize this could turn into a whole lot of "I like Dell" and "I like HP" posts, so I'm going to clarify. I'm looking for a few good resources (websites) that review/compare pre-built Server systems. An example would be http://www.linuxjournal.com/article.php?sid=6883. READY GO.
 

Answer:Where can I find some server hardware reviews?

Good question, my anwser is that there are very few sites that do this.
 

2 more replies
Relevance 43.05%

where on control pannel will i find hardware and sound button i want to change plan setting to shut down

Answer:where do i find hardware and sound on vista

Its under 'Control Panel' use 'Home' rather than the Classic view.

1 more replies
Relevance 43.05%

Hey there,

I use Norton Ghost to back up the contents of my master hard drive. The secondary hard drive(the one I back up my files to) I place in a Mobile Rack which I slide into my computer before I back up and slide out and put away when not backing up.

All this worked fine for MONTHS. I was able to back up my master hard drive to my secondary hard drive... But all of a sudden I'm having problems...

Last week I opened norton ghost but it said that it could only detect my master hard drive, not my secondary hard drive... So I logged onto windows xp and went into the Add Hardware section to see if I could detect the secondary hard drive. It found it fine and I was able to back up my master hard drive to the secondary hard drive...

This week the same thing happened however when I went into Add hardware, it won't pick up the secondary hard drive... I've also tried uninstalling the Secondary IDE Channel and SIS PCI IDE Controller but it didn't end up picking the secondary hard drive up... I've tried this and restarted my computer seceral times...

Sometimes the yellow light (the light that fashes when the hard drive is loading/thinking) appears on the secondary hard drive so I guess it is getting power to it.

Any ideas why it is not finding the secondary hard drive?
Is the secondary hard drive faulty? It's fairly new (6 months).

Answer:Can't find hardware - hard drive

Any ideas?

2 more replies
Relevance 43.05%

While I am on the computer, I heard an alert sound to inform some driver download is available for a hardware of my computer.

I do not want Broadcom Cooperation Driver update for Broadcom Bluetooth 3.0 USN, as I during clean install of my OS had this got installed automatically and made my wireless keyboard non-functional.

I do not want this to happen again.
I would appreciate if anyone could help me with the identity of this purported driver for my computer hardware?

Regards

More replies
Relevance 43.05%

I have Windows XP Media Center Edition on a Dell E521. Just recently, within this past week, I have connected my USB SanDisk ImageMate SDDR-05 Flashcard reader to my computer in order to transfer picture files from my camera to the computer via a flashcard. While doing the initial setup the Wizard Install box instructs me through all the necessary steps, but it finally states that: ?the hardware was not installed because the wizard cannot find the necessary software.? I?ve attempted this procedure several times but always with the same result...I still can?t find the device anywhere on my computer, not even within the My Computer icon. On the device manager the SanDisk hardware appears (identified as USB CFII), but as a yellow question mark upon which I always end up uninstalling/removing it. I called SanDisk tech help and they said that their Flashcard Reader already has its driver pre-installed within every XP system...and that is why their website does not offer any ImageMate SDDR-05 driver downloads for XP. I have even tried changing to the other computer USB ports including one which my printer already works without any problems...but I still get the same none result. This hardware did work, without any issues, with my older Dell which had a Windows 98 OS. The SanDisk tech suggested I contact Microsoft... Any suggestions on what I could/should do to remedy this? Please help!!!!
Thanks

More replies
Relevance 43.05%

Hey all,
Just wanted to know what software you use after a fresh install of windows to view the hardware specs. I have this laptop that has a fresh format, yet no drivers installed. I'd rather not open it up to find out what drivers I'd be needing.

The laptop is a Toshiba M45, and I have the driver page, there are just a few driver options for different configurations. So I need a piece of software that can tell what the exact hardware I have.

Thanks
 

Answer:Find hardware specs after format

Wouldn't it be faster if you go to the support page for that laptop and download the drivers from there?
 

6 more replies
Relevance 43.05%

I have a external USB DVD drive (plug and play) that I'm trying to hook up. I am getting this error.....windows successfully loaded the device driver for this hardware but cannot find the hardware device (code 41). I looked in the device manager and it has a yellow exclamation mark next to my device. I tried to update the driver(didn't work), I scanned for hardware(didn't work), I uninstalled it(didn't work), I tried the add hardware wizard(didn't work) and I followed some threads from Majorgeeks to delete the "UpperFilters" and "LowerFilters". When I try to delete the UpperFilters and/or LowerFilters, It does not show me that option. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E968-E325-11CE-BFC1-08002BE10318}
There is no listing for Upper or LowerFilters to delete! I have an older computer which is a Dell Dimension 8200 Windows XP Home Edition Version 2002 SP3. If anyone could me with this issue, that would be great! Thank you for your time! I hope I gave you enough info!

Thanks for the HELP!
Mike
 

Answer:cannot find hardware device (code 41)

try this... http://www.howtogeek.com/howto/windows/find-your-missing-usb-drive-on-windows-xp/
 

4 more replies
Relevance 43.05%

My son's Sony VAIO laptop pucked it's guts, and I couldn't get it to boot up Vista and stay running. I've reinstalled Vista, but because the great guys at the now defunct Circuit City kept his restore disk - they told them that they absolutely needed to keep it. Well, guess what - it's in a landfill now.

I need to at least figure out what video driver and what wireless network drivers I need to install. It's a Sony VGN-FZ340E - but how does one ever figure out what is installed for hardware?

Thanks in advance.
 

Answer:Sony VAIO - how do you find out what hardware you have?

newbieputerbuf said:





My son's Sony VAIO laptop pucked it's guts, and I couldn't get it to boot up Vista and stay running. I've reinstalled Vista, but because the great guys at the now defunct Circuit City kept his restore disk - they told them that they absolutely needed to keep it. Well, guess what - it's in a landfill now.

I need to at least figure out what video driver and what wireless network drivers I need to install. It's a Sony VGN-FZ340E - but how does one ever figure out what is installed for hardware?

Thanks in advance.Click to expand...

Does it have a "wired" network port? If so connect that to your cable-DSLmodem/router/network switch and run Windows update. That should find missing drivers.

This link will take you to Sony's site to get info:
http://esupport.sony.com/US/perl/model-documents.pl?mdl=VGN-FZ340E


Sam
 

3 more replies
Relevance 43.05%

Heya!

Just bought a new computer and put it together, after some failed starts etc the Asus P5K Deluxe tells me that it wants a bios recovery and starts searching in USB/CD/Floppy, so I decide to give it a go and shove in the Asus CD. It finds p5k.rom (or similar) and starts programming it says, after that it reboots and now I just cannot get past the AMIBIOS logo where it's supposed to find the hardware.

It gets stuck, but if i leave it for a while it draws huge black lines all over the screen with itty pieces of text in it, like the sata name and 800 and 1024 etc, the only thing that it finds fully is the CPU, which is a Intel Core 2 Quadro 2,4.

I have tried resetting bios and everything, but seeing as how I can't even get into the friggin bios it's quite hopeless this .. I really want my new comp to start Please help!
 

Answer:Asus P5K Deluxe won't find hardware! HELP!

Shameless bump .. Guys I really want to make my new computer working please help if you can.
 

1 more replies
Relevance 43.05%

Here's the setup:
Recently purchased an EMachines M6805 laptop (A64 3000+). Laptop comes with built in 802.11b/g lan in the form of a Broadcom 54g MaxPerformance wireless card.

After fiddling with it for 10 minutes, wireless worked out of the box. It came with Windows XP EMachines Version pre-installed with all the drivers. Now, of course I'm too stupid to settle for this, so I reformatted two days later and put XP Pro on here. It was lightning fast after that. Problem was, it had none of the drivers on here, so I chickened out and put my other copy of normal Windows XP Home on here. I found the drivers this time and installed them from a restore CD, and wireless worked and so did wired. So far so good.

The problem arose in that Win XP Home didn't accept the emachines cd-key cause it was for a specific version, and i wanted to use my legal home copies, because they don't have all the bloatware the Emachines one does. So I stupidly resorted to killing the WPA (windows product activation) process with a crack. I'm pretty sure I can narrow that down to when it stopped working, though I can't be sure because I fell asleep with my pc on in my bed, and woke up 4 hours later with it sitting next to me. This is around the last time it worked, but I was tired, so don't clearly recollect.

I then got frustrated and reinstalled XP Pro one more time, and it still didn't work even with the drivers. Now I've put the original EMachines copy of ... Read more

Answer:54g card does not find anything, settings or hardware?

7 more replies
Relevance 42.64%

Hi,

I have had my PC for about 3 years and both the CD-R and CD-RW have worked fine. Last week both drives disappeared from My Computer. When I go into Device Manager they are both visible but have an exclamation mark against them in a yellow background. Under properties I get this message 'Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)'

They both still have power and I have checked the internal connections. I am running Windows XP.

Can anyone suggest what I try next?

Cheers,

Aldo
 

Answer:Solved: Can not find hardware Device (Code 41)

7 more replies
Relevance 42.64%

I was just wondering... is there a program or something that gives you numbers of power usage from each peice of hardware in your PC?

Poop... i'm starting to think i put this in the wrong forum... sowwie!
 

Answer:How do you find out power usage of computer hardware?

It can't be done using software because of the lack of sensors (on your hardware) that can be used to monitor the current supplied to each piece of hardware.
 

3 more replies
Relevance 42.64%

I have 2 desktop computers at home (both Dell, Windows XP), and they WERE networking just fine. I reformatted the second one (went perfectly), but when I tried to reconnect the network, I got a message saying it couldn't find the network hardware. ?! I used the original CDs that came with the computer. I see that under "device drivers" there are some yellow question marks next to some items--I'm guessing there shouldn't be. But I don't know what those items are, and why they wouldn't be on the original disks. Can anyone clue me in? Thanks.
 

Answer:Solved: Computer can't find network hardware

Go to Dell's website and download the correct device drivers for your specific machine. I would burn them on CD for later use also. But most likely that is the cause of your problem.
 

2 more replies
Relevance 42.64%

Hi,Windows 7 -32bit3GB RAM500GB HDD Western Digital AAKS 7200RPMGame: Medal of Honor Allied Assault (a decade old FPS game with little requirements).GPU: Galaxy Nvidia 450 GTS (8 month old,75C temp under load,48C idle temp)PSU: 500W ocz500mxsp (1 year old)CPU: E6550 Core 2 Duo (35C idle temp,60C loaded)I've been playing in this particular multiplayer game server for 4 years and never had a problem.Always 50ms ping.They did not move their servers.Not a single other play is experiencing lag issues,just me.My ping is now anywhere between 150ms - 600ms.When my player doesn't move- the ping is low.When I move a lot and shoot- it goes high.The internet(router,ISP,modem) is not the issue.Played the game on another computer on local LAN with no problem.Speedtest and Pingtest show 10ms latency with 0% packet loss.25Mbps download speed.I re-installed the latest version 314 Nvidia drivers.I've also tried the driver from Galaxy's own website (version 306).I re-installed the game too.I re-installed the entire operating system from a scratch today and installed the drivers only(no other program,no antivirus) but that didn't help.I even changed the hard drive today.I checked RAM for errors and it came up clean.I still have the same high ping issue.Now I believe the problem is caused either by failing GPU or PSU but I need your help to find out which one causes it.Any program that I can use to find out which component is causing the mess?Thanks !!!

Answer:How can I find out which hardware component is causing lag in FPS gaming

That is a high ping. But is the ping test inside the game? Please explain. A ping test from the command line tells nothing about the GPU performance. Or even the game. So I sues you mean the game is reporting long ping.Did you say you do not have the issue with another PC?  If so, that implicates the motherboard, especially the south bridge, which is not replaceable. Do you overclock the motherboard in any way?

14 more replies
Relevance 42.64%

Our network admin is currently trying to find the hardware configuration/specs of all the servers. Between looking at the General tab of the Properties box on My Computer and msinfo32.exe, I can get all the information that I need on XP and 2K machines.

Is there a way to get this information on a Windows NT machine?
 

Answer:How to Find Hardware Configuration Specs on an NT Machine?

techgirl05 said:

Our network admin is currently trying to find the hardware configuration/specs of all the servers. Between looking at the General tab of the Properties box on My Computer and msinfo32.exe, I can get all the information that I need on XP and 2K machines.

Is there a way to get this information on a Windows NT machine?Click to expand...

try getting it from dxdiag.exe
 

2 more replies
Relevance 42.64%

one of my computer just suddenly died yesterday and i am trying to figure out what the problem is
My XP has totally died, it just give me the blue screen saying there is a problem and might be virus and ask me to scandisk. But I can't do that as it just stuck at the blue screen unless i reboot

when i boot the computer, it says "Detecting primary master drive: WD....., Detecting primary slave drive:WD........, Detecting CD drive:....."
Usually when it is normal, it doesn't have the word detecting to go with it. After detecting for a few seconds, it would say "Primary slave drive fail" even if the drive is found above. Sometimes same thing would happen with the master drive.
This is very weird, i thought its a virus problem and i am trying to scan the comp from my 98 (C drive). If the master drive fail, then i won't be able to access 98. If works sometimes and if it doesn't, i just boot until it works (the drive is detected).

I am not sure if its a virus problem and hardware problem. It seems like the comp has trouble detecting the harddrives for some reason.
Can anyone help? Thanks

Answer:Can't find Harddrives? (Virus or hardware problem?)

btw, i have already formatted my D drive (XP drive) cuz i thought it was the virus.. but it still acting the same way. So maybe hardware problem?

3 more replies
Relevance 42.64%

After reformatting my friends computer (yes, I have done this before) we have a couple of problems that I have never dealt with before. Ist of all, we have only 2 or 16 colors available (windows 98) and even worse, we have no modem detected. We took the modem out and put it back in , rebooted, hoping that it would be detected. It wasnt. There is NO information about this modem on it or in the spec sheet for the pc. So, we have no clue about drivers, where to get them, manufacturer etc. Where do we begin?
Any help you can give will keep us busy enough to maintain our sanity ;-) since I have to come all the way home, get ideas , go back and try them at her house-this is turning out to be quite the chore. I appreciate your help ALOT
 

Answer:{Moved to Hardware} can't find modem after reformatting

Moving to Hardware by user request.
 

1 more replies
Relevance 42.64%

I can find several people who have the same trouble but no answers? Or donot I look properly? Please help me because I cannot change the standard use of mij laserprinter to grey and concept instead of color en normal. That makes it very expensive. Thanks in advance, Mulligen

Answer:cannot find or delete netwerkprinters in hardware & devices

You can give this a try to see if items are listed.
Go here to this tutorial.> Devices and Printers - Device Stage

When you see below window highlight item you want to remove then click Remove Device.

Also some items can be listed under Program and Features instead of Device Manager hardware.
Here. > Programs and Features - Uninstall or Change a Program

1 more replies
Relevance 42.64%

Hi,Windows 7 -32bit3GB RAM500GB HDD Western Digital AAKS 7200RPMGame: Medal of Honor Allied Assault (a decade old FPS game with little requirements).GPU: Galaxy Nvidia 450 GTS (8 month old,75C temp under load,48C idle temp)PSU: 500W ocz500mxsp (1 year old)CPU: E6550 Core 2 Duo (35C idle temp,60C loaded)I've been playing in this particular multiplayer game server for 4 years and never had a problem.Always 50ms ping.They did not move their servers.Not a single other play is experiencing lag issues,just me.My ping is now anywhere between 150ms - 600ms.When my player doesn't move- the ping is low.When I move a lot and shoot- it goes high.The internet(router,ISP,modem) is not the issue.Played the game on another computer on local LAN with no problem.Speedtest and Pingtest show 10ms latency with 0% packet loss.25Mbps download speed.I re-installed the latest version 314 Nvidia drivers.I've also tried the driver from Galaxy's own website (version 306).I re-installed the game too.I re-installed the entire operating system from a scratch today and installed the drivers only(no other program,no antivirus) but that didn't help.I even changed the hard drive today.I checked RAM for errors and it came up clean.I still have the same high ping issue.Now I believe the problem is caused either by failing GPU or PSU but I need your help to find out which one causes it.Any program that I can use to find out which component is causing the mess?Thanks !!!

Answer:How can I find out which hardware component is causing lag in FPS gaming

That is a high ping. But is the ping test inside the game? Please explain. A ping test from the command line tells nothing about the GPU performance. Or even the game. So I sues you mean the game is reporting long ping.Did you say you do not have the issue with another PC?  If so, that implicates the motherboard, especially the south bridge, which is not replaceable. Do you overclock the motherboard in any way?

14 more replies
Relevance 42.64%

Hello folksHave recently formatted and re-installed XP, all gone smoothly with no obvious issues, have spent tha last few days updating service packs, and re-installing my favourite programs and data, again, no obvious issues. I'm using the pc now, so obviously no internet connection issues either. However, I've just got around to setting up my home network again, and I'm struggling. The network wizard will not run and tells me it cannot find my network hardware, I had no issue running this with Vista (Which I've sacked). has anyone any ideas?I have msi p6n sli v2 mobo, and I've run the driver disc for this three times now to see if it would help, I've checked that the network card is enabled in device manager, can't see anything wrong.Any ideas folks?

Answer:Network connection issue, pc cannot find hardware.

The more I Google, the more worried I'm getting. The only fix I've found to this, is to reformat and re-install XP. I've spent days getting everything back together and would really want to avoid that if at all possible.

4 more replies
Relevance 42.64%

The web is full of sites on how to find the serial number of your computer but not all serial numbers of hardware belonging to it.
I also found 'Hardware ID Extractor.exe' which is extremely limited and both Belarc Advisor and Speccy do not provide such info.
I was wondering if there is such info. Obviously this assumes the info is attached/embedded somehow on the hardware itself which may not be the case.
I have recently purchased an audio card. In wanting to register it the serial number on the box has a sticker with another number on it. I called Asus and asked them which of the 2 it may be. They said to not trust the sticker on the box and to look at the actual card. Makes sense to me except the card is already in my PC and every time I open it, it is hell--too much stuff in there and a slight movement of some wire or other creates havoc. Hence me asking this question.
Thank you

Answer:How2 find hardware serial numbers

Im afraid if you want to be sure then you will need to look, there may be software out there however you dont know if the information they are providing you is correct.

2 more replies
Relevance 42.64%

I know windows 10 has hardware based tokens, but I would like to copy this token and keep it sumwhere safe so tht in future if it cannot activate due to any reason, I can manually install the token and validate my copy of windows.

Please inform how can I find key/tokens and take backup of the same.

Answer:How to find Hardware installation - Win10 Key/Token ?

If you mean the Windows installation key, you could try this

How to view your product key in Windows 10, Windows 8 and Windows 7

or this

How to Find Your Lost Windows or Office Product Keys

5 more replies
Relevance 42.64%

Realistically what are the chances of anyone coming up with Win 7 64 drivers for older hardware such as scanners, game devices, etc.? I have an old Microtek scanner that I use maybe once a month that is perfectly functional. Microtek says good luck and please buy one of our newer models. Same with my Thrustmaster driving wheel. Haven't tried the Seiko serial port label printer yet.

Fortunately I do have a notebook running XP that I can use for the printing and scanning although I did upgrade for better gaming so I am out of luck with the driving wheel.

Question is are there any enterprising folks out there building drivers or am I tossing the old stuff and buying new?

Answer:Old Hardware Drivers

May be make list & post.

Microtek 1200 scanner, the Win XP drivers work better on Vista & Win 7.

2 more replies
Relevance 42.64%
Question: Drivers & Hardware

This thread contains information on running System Information and Assessment tools and also provides links to the latest official manufacturer Drivers and Software provided for your computer including the place for your System Support.


   Note
You should always have the latest Official Drivers for the best Performance, Security, Compatibility & Bug-Fixes for your Hardware, Software and Operating System.

Devices Identification and System Information
VistaForums SysInfo Utility
Designed to help you find Information about your system and enable other users to identify problems and help you quicker!
VistaForums SysInfo Tool
GPU-Z
Graphics Card utility designed to give you all information about your video card and GPU.
GPU-Z Video card GPU Information Utility

CPU-Z
System information tool for Microsoft Windows that detects the CPU, RAM, Motherboard Chipset and other hardware features used in your computer.
CPUID

System Requirements Lab
Looks at your computer's hardware and software to determine whether or not your current system can run a product. Each of your computer's components is evaluated to see how well it meets the minimum and recommended requirements. Recommendations are made on how to update or upgrade each component which does not meet the listed requirements. Sometimes, a simple, free software download is all that is needed.
Can You Run It? Powered by System Requirements Lab

Vista has two built-in System Information & Analysis ... Read more

Answer:Drivers & Hardware

Good info, I may compile it into a web page for my system at home. .

34 more replies
Relevance 42.64%
Question: Hardware Drivers

I am in need of the drivers for the following devices;
Multimedia Audio Controller - PCI\VEN_8086&DEV_24C5&SUBSYS_A0021458&REV_02
PCI\VEN_8086&DEV_24C5&SUBSYS_A0021458
PCI\VEN_8086&DEV_24C5&CC_040100
PCI\VEN_8086&DEV_24C5&CC_0401
PCI Modem - PCI\VEN_1057&DEV_3052&SUBSYS_30201057&REV_04\4&1A671D0C&0&00F0
Video Controller (VGA Compatible) - PCI\VEN_8086&DEV_2562&SUBSYS_25621458&REV_03\3&13C0B0C5&0&10

The device is a clone PC that I recently formatted due to a virus infection. I have tried to search for the drivers online but keep getting sites that ask me to install some other software before I can get the drivers, but even if I do I will not get them
Please assist
 

Answer:Hardware Drivers

8 more replies
Relevance 42.64%
Question: Hardware drivers

Is there a free site that tests your hardware configuration and directs you to latest driversThe Pig

Answer:Hardware drivers

If there is, I'd also be interested in finding it. TR

6 more replies
Relevance 42.64%

Good morning. I got a virus on my computer and my desktop and task bar went black. I ended up getting that back by moving the explorer.exe file but now my computer does not register or show my CD/DVD Writer. I went and deleted the Upper and Lower filers last night and it brought back my floppy disk drive but I do not have a floppy disk drive. Please help me. I have been working on this for hours and a system restore also does not work since I did have the virus. Thanks so much.

More replies
Relevance 42.64%
Question: Hardware Drivers

Mods - Sorry, I just realized that I posted in the wrong section. Please delete post. Thank you.
 

More replies
Relevance 42.64%
Question: hardware drivers

Hi
I just formatted and i'm getting 3 conflicts


other PCI device
PCI MEMORY CONTROLLER
SM BUS CONTROLLER


the DELL driver CD dosen't seem to have the drivers.


what can I do?

thanks

Answer:hardware drivers

You could try the Dell website, and just do a search for the model of computer you have.

www.dell.com

2 more replies
Relevance 42.64%
Question: hardware drivers

Hi Everyone,

I'm very new to this computer thing I wander could someone help me please. I have an old base station computer with Windows XP installed but some of the hardware drivers are not installed. Listed below is the information I was told to place here :

MODEM.

PCI\VEN_8086 & DEV_1080

ETHERNET.

PCI\VEN_8086 & DEV_1050

VIDEO.

PCI\VEN_8086 & DEV_2572

I would be very grateful for any assistance given on where and how to download the drivers for the above mentioned.

Thanks Guys.
 

More replies
Relevance 42.64%

Have a shop homemade desktop pc that had Windows xp. I have not got the original cd with drivers for hardware.
I reinstalled XP. Now the internet connection doesn't work and Devise manager says 'The drivers for the pci simple communication controller devise are not installed.' I have hooked up an outside modem and it works fine.

Is there some online programme that can tell what drivers i need for this modem

Also needed are drivers for universal serial bus (usb) controller and multimedia audio controller. They all have yellow question markes on them in devise manager.
 

Answer:need hardware drivers for whole pc.

Your motherboard manufacturer will have most of these.
Everest Home edition will identify any other hardware:
http://majorgeeks.com/download4181.html
 

1 more replies