Computer Support Forum

samsung mobile mtp device failed to load driver

Question: samsung mobile mtp device failed to load driver

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails everytime.

I run antivirus and this is not a case.

I am pretty lost. I know that if I will format my computer and install Windos 7 it will solve the problem but I don't want to do this drastic step.

Can someone please help me?

Thanks!!!

Relevance 100%
Preferred Solution: samsung mobile mtp device failed to load driver

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 83.23%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 83.23%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 82.82%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 82.82%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 82.82%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 82.82%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 82.82%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 82.82%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 82.82%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 82%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 82%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 82%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 82%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 82%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 82%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 82%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 82%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 82%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 80.36%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 78.72%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 77.49%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 73.39%

We have some symbol windows mobile-based handheld devices that we use in our business.  We connect these devices to our computers to copy files to.  This all worked fine until recently the devices come up as failed.
It appears in device manager with a yellow exclamation point.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.  (Code 19)
I've tried all the solutions I can find on the web and none of them work.
Including:
Uninstall the device in device manager and scan for changes.  It downloads the driver from windows-update and returns to code 19.
Tried hardware troubleshooter which basically seems to automate the process of uninstalling and scanning.
I've tried removing windows media player 12 feature and adding it back.
I've tried deleting USB controllers from Device Manager and rebooting, it re-detects them all and still gets code 19 on the device.
I've tried deleting upper and lower filter values in the registry which I found out later is mainly for CD/DVD devices, that didn't fix anything.
I've tried removing and re-installing Windows Mobile Device Center and driver pack and that did not fix it either.
Additionally Canon Powershot camera gives us similar results.  MTP USB Device failed.  
This is so far happening on 3 of our workstations that we know of.
At first we thought it was due to windows updates but nothing recent has been installed that looks rela... Read more

Answer:SOLVED:Windows Mobile-based device and Canon Powershot cameras showing code 19 and MTP USB Device failed.

Hi,

 

Thanks for posting in Microsoft TechNet forums.

 

Do you have Kaspersky installed? Kaspersky Filter driver caused that any USB device could not connect.

 

It is suggested to have a look at the following registry. Make a backup of it and remove the Upperfilters setting:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{EEC5AD98-8080-425F-922A-DABF3DE3F69A}

“Upperfilters” = klfltdrv

 

If the issue persists, please find a working machine and compare the registry settings.

 

Best Regards

Magon Liu

TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]

 
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

13 more replies
Relevance 72.57%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 72.16%

I am tying to sync my Samsung Galaxy J7Sky Pro phone with my computer using Samsung Smart Switch Program.
When I start the Smart Switch Program and plug in the USB cable from the phone to the computer USB port, the device driver for the phone does not install properly or recognize the phone, as depicted by a yellow exclaimation point for the Galaxy J7 Sky Pro
device driver and AMDA00 interface under system devices.
I tried reinstalling the Samsung phone device driver but still get the above exclaimation for these drivers.
I then shut down and restarted the Samsung phone and the drivers reinstalled properly and the Smart Switch Program worked. 

My issue is that the next time I restarted my computer, I get the same device driver errors.
Is there some way to prevent having to restart and reinstall the device drivers each time I want to sync my phone using the Smart Switch program? 
Same issue used to happen with my Samsung Galaxy SIII phone, before I upgraded to the Samsung Galaxy J7 Sky Pro.
It is a real pain in the neck and time waster.

More replies
Relevance 70.93%

I am updating a website and the website works well all around except on my samsung s2x phone the main page floats across the screen from left to right. I tried it on a friends iphone and it worked good.

More replies
Relevance 70.11%

I'm trying to connect my Samsung i9001 to my desktop so I can tether the wifi to it (it currently doesnt have any internet access). But when ever I try to connect the phone it gives the error mtp usb device failed. Any ideas what the hell this is? I've downloaded the samsung device drivers as far as I can tell... maybe I had the wrong file? I also installed Samsung Kies but that also can not access the phone.

Answer:"MTP USB device failed" connecting samsung to PC

Anyone? I'm still stuck on this for two days now

4 more replies
Relevance 69.7%

I have just received a replacement cell phone from Verizon. Samsung gusto sch u360. Need a usb cdma driver so it can interact with my laptop w/ XP Home. The Samsung site did not appear to be to helpful.Their suggestions range from "can't be done" to "it can be done via memory sd card". Neither did the Verizon site. The Samsung PC Studio 3 worked with my T-Mobile T429 but no help on the Gusto. Samsung PC Studio 7 is Verizons suggestion to solve this one but it doesn't work. Windows thinks the phone is a CD-Rom.
Anyone have any ideas on how to get the proper driver ?
 

Answer:USB Driver for Samsung mobile phone

The phone appears not to have any USB interface except for charging. It is a Blue-Tooth device.
 

3 more replies
Relevance 69.7%

I have just received a replacement cell phone from Verizon.Samsung gusto sch u360.Need a usb cdma driver so I can download pictures to my laptop(XP Pro)
The Samsung site did not appear to be to helpful.
Anyone have any ideas on how to get the proper driver ?

Thanks
 

More replies
Relevance 68.88%

Since I recently did a fresh install of Win10 TP 64-bit, I also had to reinstall all the apps and drivers I previously had in place from the earlier "upgrade" I did. And, part of that was adding Samsung Kies to be able to connect my Samsung Galaxy S5 to the PC.

In the 32-bit upgrade, the phone connected both with and without Kies -- using the latest Samsung drivers (v1.5.49.0), which Kies installed automatically.

However, when I went to install the same drivers in Win10 TP 64-bit, the install failed and I couldn't tell why because the pop-up screen was in Korean! (my guess, since it looked like a set of Asian characters and Samsung is in Korea).

So, I downloaded Kies v3, ran the install on that, and got the same Korean(?) popup.

I searched for sometime for drivers, but the Samsung site is useless and the only version I could find elsewhere is v1.5.45.0 -- not the latest.

Anyone able to find the v49.0 64-bit drivers and have success installing them?

Answer:Samsung USB Driver for Mobile Phones & Kies

Mark Phelps said:

Since I recently did a fresh install of Win10 TP 64-bit, I also had to reinstall all the apps and drivers I previously had in place from the earlier "upgrade" I did. And, part of that was adding Samsung Kies to be able to connect my Samsung Galaxy S5 to the PC.

In the 32-bit upgrade, the phone connected both with and without Kies -- using the latest Samsung drivers (v1.5.49.0), which Kies installed automatically.

However, when I went to install the same drivers in Win10 TP 64-bit, the install failed and I couldn't tell why because the pop-up screen was in Korean! (my guess, since it looked like a set of Asian characters and Samsung is in Korea).

So, I downloaded Kies v3, ran the install on that, and got the same Korean(?) popup.

I searched for sometime for drivers, but the Samsung site is useless and the only version I could find elsewhere is v1.5.45.0 -- not the latest.

Anyone able to find the v49.0 64-bit drivers and have success installing them?



Try Wondershare MobileGo for Android;
install the program, connect your devices, let the program find drivers, then keep using or uninstall the program if you wish.
Your devices should connect always after that.

5 more replies
Relevance 68.88%

Where can I find a safe driver for Samsung SGHj700v mobile phone. I am nervous to download an exe file from an unknown site. Will AVG 2011 version 10.0.1392 protect me.

Answer:driver for samsung sghj700v mobile phone

Please don't double post.Always pop back and let us know the outcome - thanks

2 more replies
Relevance 68.88%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Relevance 68.47%

Microsoft Windows Mobile Remote Adapter -from windows update Install  failed - Where can I find this so I can retry to re-install - mobile device does not connect  WINDOWS VISTA- verizon treo running windows mobile 6 professional CE OS 5.2.1620 (BUILD 18125.0.4.2) Here is the error message: Microsoft Corporation - Networking - Microsoft Windows Mobile Remote Adapter Installation date: ‎10/‎4/‎2009 12:02 PM Installation status: Failed Error details: Code 800F020B Update type: Recommended Microsoft Corporation Networking software update released in May, 2007 More information: http://winqual.microsoft.com/support/?driverid=20060042 Help and Support: http://support.microsoft.com/select/?target=hub I could not find anything to help me with this.. I did download & install the new Windows mobile device center v 6.1.6965  but the device will still not connect.. i'm thinking the failure of the Microsoft Windows Mobile Remote Adapter is the problem (i think)  so I want to re-install the update.. but don't know where to get it. Windows update in VISTA does not let you go out and pick an update from a list Any and all help appreciated

Answer:Microsoft Windows Mobile Remote Adapter -from windows update Install failed - Where can I find this so I can retry to re-install - mobile device does not connect

Your best option may be to open device manager (with device connected) and uninstall any related device, making sure the 'Delete driver software for this device' is checked.Once you have done this, unplug your device, uninstall WMDC 6.1 and reboot your machine. Then follow the instruction on my first reply, this should sort it for you.If anyone is helpfull, please click the 'Vote as helpfull' icon.
If anyone has answered, please click 'Suggest as answer' at the bottom of the post involved :)

Thanks

6 more replies
Relevance 68.06%

Hi I purchased a Sumsung Tocco lite mobile, but there is no USB driver for Vista 32 bit,(sumsung are not updating their system) so can't match my computer/ mobile.Any one out there have any ideas tried surfing for a solution but no joy.Sandy

Answer:samsung mobile tocco lite usb driver vista 32 bit

What model number is it exactly? G

10 more replies
Relevance 67.65%

I try to connect my mobile to my laptop. the phone starts to charge but i cannot find it anywhere in my computer.
when i look in devices and printers it is there highlighted with yellow icon. i right click and select troubleshoot.
the problem is the driver is not installed. so i select install new driver.
then another pop-up appears saying "driver for cdc serial is not installed" so click install the driver.
when i try to install this a final pop-up says that neither my phone driver or this cdc serial driver were found or installed.
please help i have had this problem for a while now

Answer:Driver not found samsung mobile mtp on toshiba windows 7 64bit

What kind of phone? Android Samsung?

Check out PdaNet+ and FoxFI.

1 more replies
Relevance 67.24%

Hi, 
I have dell latitude E7470 with windows 10. I have problem when I want to install dell dw5811e driver. I download latest software driver from dell support, run it and wait them to finish. Afterward software driver is configuring mobile broadband device, it always freezes at 37% with message "Fail error 82". I try with older version of software driver. It is still the same. Could anyone suggest how to resolve the problem.
regards,
Pat 

More replies
Relevance 66.42%

I just tried reverting to an earlier version of windows 10 mobile, and it failed halfway through. Now my phone boots to this square icon thing and does nothing. When I hold down the power button as per the reset instructions, the phone takes about 20 seconds to turn off. It reboots to the square icon. The instructions then say to hold down the volume down button, but after 2 minutes it has not responded.
Is there a way to force it to reset without having to have a working operating system on it? How do I force it to install windows 8.1 again?

Answer:How to reset lumia 640 after failed Windows Mobile Device Recovery Tool?

Originally Posted by Windows Central Question I just tried reverting to an earlier version of windows 10 mobile, and it failed halfway through. Now my phone boots to this square icon thing and does nothing. When I hold down the power button as per the reset instructions, the phone takes about 20 seconds to turn off. It reboots to the square icon. The instructions then say to hold down the volume down button, but after 2 minutes it has not responded.
Is there a way to force it to reset without having to have a working operating system on it? How do I force it to install windows 8.1 again? There's the hard reset key sequence:
1 - unplug phone
2 - hold vol up and simultaneously plug charger
3 - keep holding until a ! mark appears
4 - leave button and follw the sequence one key once:
vol up, vol down, power, vol down
5 - gears should appear, you phone should replace last downlaoded build
If doens't work, plug your phone to a pc and use WDRT.
holding power button is soft reset, and is useless now. For all the rest, keep in touch and join forum, we can help you

1 more replies
Relevance 64.78%

Hello,
I recently encountered an error with my Intel GMA driver for mobile, which is quite unusual. I believe that happened after a game crash (somehow my whole computer got really slow for a couple of minutes after I force-rebooted the computer - out of options).

But since, it seems the driver can't recover from this error, as I can see two things happening :
- if I attempt to access my GMA configuration panel, it fails to respond, and if I kill the actual "tray" process, it comes back up properly, except it doesn't have a proper configuration - for instance, the listboxes with "refresh rate" are empty, same for resolution, ... somehow the driver couldn't load the presets.
- if I attempt to access the Windows Display Configuration, it fails with a "The system has started with the standard VGA driver", but still brings up the configuration panel with the options all messed up (-1, -1 screen resolution, ...).

I've been doing some screenshots to show you what happens in order to solve it more easily, however I fear it might not be as useful because my OS is in french .


This is the failing driver configuration panel.


This is the failing Windows Display Configuration.


This is the configuration dialog box.



For some reason Windows tells me the driver is incompatible with my system (Vista x64), but it worked fine before. My diagnostic is that the driver is somewhat corrupted and incorrectly reports to the system that it ca... Read more

Answer:Intel GMA driver for mobile failed and doesn't recover

Hello Bacterius,
I would re-install the video driver first, as this is most likely to be at fault.
Un-install the old driver first, then install the new one, reboot when prompted and see if there is any improvement.

Hope this helps, good luck and post your results.

3 more replies
Relevance 63.96%

I tried to update my older Radeon ATI 5450 GPU via windows update...

I received the message from windows update, and showed it failed update with the 0x800706be

However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?

Answer:Failed Update 0x800706be driver...but device mgr shows updated driver?

You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.

2 more replies
Relevance 63.96%

trying to fix audio problems, volume control states that no audio output device is installed, i downloaded the appropriate driver from lenovo site, also downloaded two seperate versions of conexant, the installation process begins but is cut short and the following message displayed..."driver instalation failed could not find the MEDIA device for this driver" can anyone offer some advice?

Answer:R61e "driver instalation failed could not find the MEDIA device for this driver"

nath, welcome to the forum, have you installed the UAA HD audio driver? You can find it by scrolling down a bit on the R61e Audio Driver Site, please ensure you follow the instructions.  Hope this helps

2 more replies
Relevance 63.96%

Hi , I just reinstalled my SL500 but i got a problem.I download the lastest audio driver from lenovo site and i've got this message Driver Installation Failed : Could not find MEDIA device for this driver....I've searched everything i could find in google and the forums but i've got nothing... I'm usin Win XP 

More replies
Relevance 63.14%

Basically I jailbroke my iphone 4 for the second time after restoring it yesterday, but then something went wrong with it and it stayed on the apple logo for ages so I restored it again today. The restore seemed to go fine and all my stuff went back onto the phone but I want to jailbreak again and my computer isn't recognising my phone!

When I plug my phone into my laptop it charges, and itunes syncs with it but under itunes 7.1.2 in the device summary it says 'please connect this iphone using a USB etc.' so I think it may be syncing over wifi because I have that enabled.

When I go to computer the phone isn't there and so I have reinstalled itunes, restarted the laptop, updated the laptop and checked device manager. The Apple Mobile device USB driver isn't there under Universal Serial Bus Controllers although Apple Mobile Device support is in my installed programs. Also the iphone isn't showing up anywhere, not even as a camera. I tried updating the driver software of USB composite device with the usbaapl file but it said 'installing this driver is not recommended...may not be compatible etc' and then I get Code 10 with the Apple Mobile Device USB driver appearing but with a yellow ! and it doesn't work.

No idea where to go from here please help!!!
 

More replies
Relevance 63.14%

I am kindly asking for assistance in order to download bluethooth peripheral devive driver for my samsung d880. it has been 2 months before i connencted the phone through p-suit. I do not know weather it is the problem of my phone or Windows 7.

Answer:bluetooth peripheral device driver for samsung d800

  
Quote: Originally Posted by owen fungurani


I am kindly asking for assistance in order to download bluethooth peripheral devive driver for my samsung d880. it has been 2 months before i connencted the phone through p-suit. I do not know weather it is the problem of my phone or Windows 7.


That is driver for your phone not for lap

1 more replies
Relevance 63.14%

While run diagnostic got error Smart check : PassedShort DST : Failed Failure id : - 9*******- 7**** -M*********-6***********Product Id: K********* Hard Drive : 1

Answer:the selected boot device is load to failed / Smart Check Pas...

This means the hard drive needs to be replaced. Post the full model number and we can provide the Manual and other help. 

1 more replies
Relevance 62.73%

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

Answer:The driver \Driver\WUDFRd failed to load

you ever resolve this?

1 more replies
Relevance 62.73%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this??? I really need help to fix this
Any help is greatly appreciated
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

8 more replies
Relevance 62.73%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.

The driver is MAT****A DVD-RAM UJ-861H ATA Device

And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.

Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Please try the steps below:

1. Uninstall all third-party burning software, such as Nero and Roxio.

2. Perform a Clean Boot to test the result.

Clean Boot

========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.


Note: Please click Continue if the "User Account Control" window pops up.


b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.


Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".

Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.

If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.

If not, you may need to restore the system to its factory settings.

Hope it helps.

2 more replies
Relevance 62.73%

Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device. How can I fix this?

Any help is greatly appreciated,

thisismyuser
 

Answer:Solved: Windows cannot load the device driver for this hardware. The driver may be co

16 more replies
Relevance 62.73%

Ok I have done quite alot of searching on here and I have found out quite a few things I have exhausted every friggin resource imagineable. The only thing I have yet to try is the registry edit. Now I pretty much have that down I just have one simple question. When deleting the upper and lower filters...

While in the registry I have found the upper filters on the right hand side. The only problem there is - No lower filters.

Could this be a problem?

Also , do the upper/lower filters need to be removed from the Control set 001 and Control set 002 . Please get back to me ASAP.


Thanks.
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Anyone have even the slightest clue please let me know.
 

6 more replies
Relevance 62.73%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this???
Any help is greatly appreciated
 

More replies
Relevance 62.73%

Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:

a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Go to the sound card makers web site and DN the latest XP drivers.
 

1 more replies
Relevance 62.73%

hey iv gotta western digital 3200aavs and my new hardware wizard wnt install it.. i tried driver detective.. but tht cnt identify my computer make and model ect.. so tht wnt help... and wen i connect my hdd via usb it blings so i know it cn see it but nufn in manage tab tht i access via rgt clickn my comp.. nufn in device manager so its not a matter off not bein allocated a drive letter.. i think my comp doesnt even regester it is a hdd!! any ideas?? or drivers?
 

More replies
Relevance 62.73%

will there be any problem for my iPhone, if i remove apple mobile device usb driver ?

Answer:Problem related with apple mobile device usb driver

Hi abtahi and welcome to Seven Forums.

Normally what will happen is when you remove them, then reconnect your phone it will automatically reinstall them.

1 more replies
Relevance 62.73%

Hi,

My Iphone 5 is no more recognized by my Toshiba because the Apple Mobile Device usb driver is damaged.
So i cannot synchronise it with iTunes.

I would like to download from the Toshiba site the required driver. Can you help me ?

Answer:Satellite P300 - Apple Mobile Device usb driver

Toshiba does not provide USB 2.0 driver because this driver is part of the Windows system.

I guess you would need to reinstall the whole Apple software to fix your issue

3 more replies
Relevance 62.32%

When i start my computer up I get the message Error 7323 1 or more network drivers failed to load.

Answer:Driver failed to load

If you are networked then you have trouble beyond my experience.If not, then which Windows are you running 95-XP?Try Google with error+7323 and see what turns up......and maybe my posting will encourage someone with wider knowledge to help you.

7 more replies
Relevance 62.32%

I turned off System Restore in order to run Superantispyware and when I tried to turn it back on ,,System Restore encountered an error to enable/disable one or more drivers failed to load. Restarting did not help. With some help by googling my problem i was lead to event manager and found errors at the time I tried to turn System Restore back on. "The following boot-start or system start driver failed to load" It listed nvatabus and nvraid. I have ran Superantispyware with System Restore off9because I cannot get it turned back on) but I have not tried it in safe mode. Should I try running it in safe mode or do you have any other suggestions or reasons why these drivers will not load? Thanks a bunch for any help you can give me with this!!!
 

More replies
Relevance 61.91%

hello there i am doug  i am having a problem with Ndis2 Driver in the device manager it has an exclamation on it and when i into it it says it can not load the device driver so i tried to upgrade it but then it says the best driver is already installed so i am confused please does anyone have any good ideas??  please if possible email me direct to [email protected]   thank you

Answer:Ndis2 Driver unable to load device driver

Right click the offending device in Device and select Remove.Make sure beforehand you have the correct driver.Re-boot and re-install the driver and you should be good to go...

9 more replies
Relevance 61.91%

Apparently, I am one of many who seem to be having this issue. And just like everybody else, I turned to Google for some answers. Here is my scenario (perhaps gregrocker could point me in the right direction?):

I am running on a laptop with the following specs:

Dell Studio 1735
32-bit Vista Home Premium, SP1
Intel 2 Core Duo, T8100 @ 2.10 GHz
250 GB SATA HDD, 5400 RPM
4 GBs of RAM
256 ATI Mobility Radeon HD 3650
8x Slot Load CD / DVD Burner (Dual Layer DVD+/-R Drive)

I downloaded the .iso image of Windows 7 through the software program at Penn State and burned it to a DVD. When I restart my computer and boot off of the DVD drive, I get the Windows 7 Installation interface. As the setup begins, I get an error message that says "Load Driver" across the top of the window, and says "A required CD/DVD Drive Device Driver is missing". I tried a few things to circumvent this issue:

1. I swapped out the installation CD with one of the CD's that came with my laptop that contains all of my device drivers. It found one compatible driver for the ATA/ATAPI Controller, and despite selecting it and hitting next, it didn't work.

2. I took the service tag from my laptop, downloaded each and every driver that it's associated with, burned it to an .iso, and swapped THAT out when I tried to install. Again, nothing happened.

3. I mounted the .iso onto an 8GB Cruzer and made a bootable flash drive. Upon trying the install again, I had the same problem.

4. I tried to bu... Read more

Answer:Load Driver: Required CD/DVD Drive Device Driver: HELP!

Try extracting the ISO to Vista desktop to run Setup from there.

You can locate the driver in Vista's Device Manager SATA controller Driver info tab.

The fact that it would duplicate the error for USB flash install sounds like a malfunction.

Try removing 2 gb of RAM.

Check BIOS version to see if you have the latest.

Checksum the HASH of the ISO you downloaded to confirm it here: http://www.mydigitallife.info/2009/0...vd-iso-images/

9 more replies
Relevance 61.5%

 I'm getting a warning in the event log upon startup.  Windows 8.1 Pro.   This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error.  What is WUDFRd ?  All the information I can locate refers users to their OEM for a driver update..  Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          2/10/2015 11:24:03 AMEvent ID:      219Task Category: (212)Level:         WarningKeywords:     User:          MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />    <EventID>219</EventID>    <Version>0</Version>    <Level>3</Level>    <Task>212</Task>    <Opcode>0</Opcode>    <Keywords>0x800... Read more

Answer:The driver WUDFRd failed to load...

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

1 more replies
Relevance 61.5%

Has anybody been able to fix this warning message that came with W8? Every machine I have running W8.1 gets a couple of these warnings at boot time. This system ASRock Z77 OC Formula/3770K seems to get a triple dose of the warnings. I have tried the "Fix" of setting the startup to "Automatic" for "Windows Driver Foundation" but that had no effect. I do have a USB Keyboard and Mouse connected to the system but then who doesn't these days. I know it is just a warning message and probably has no effect on the system but.... I'm so close to having a clean event log at boot time. Any next step suggestions would be appreciated. Maybe W8.1.1 will fix?

Answer:Driver\WudRd Failed to Load....

I used to see this, but I don't any more. I don't remember what I did to fix it, it was a while back.
But I have the service set like this, so maybe that was it:

wudfsvc = Manual start

10 more replies
Relevance 61.5%

Any suggestions on what to do about this?



Updating the driver didn't pan out, neither did uninstalling and rebooting (driver installation failed on reboot). Drive was working before. I know this can be solved; seen this before on somebody else's computer a year ago. On the other hand, maybe the driver isn't compat with 64bit Ultimate--but it was OK under 32bit Home Personal.

Answer:CD drive driver failed to load

Correction. The drive in question isn't a CD drive. It's a DVD drive.

20 more replies
Relevance 61.5%

I just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!   

Answer:The driver WUDFRd failed to load...

i have similar "issue" with my W520: Log Name:      SystemSource:        Microsoft-Windows-DriverFrameworks-UserModeDate:          29. 7. 2011 0:49:19Event ID:      10114Task Category: Startup of the UMDF reflectorLevel:         InformationKeywords:      (2)User:          SYSTEMComputer:      ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.    Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          29. 7. 2011 0:49:19Event ID:      219Task Category: (212)Level:         WarningKeywords:     User:          SYSTEMComputer:      ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3.  in my case it is related to external USB hard drive, which is displayed... Read more

9 more replies
Relevance 61.5%

I keep getting the following message which I don't understand:

" Output Firewall
Output Firewall
Failed to load Output Firewall netwark operation driver.
Output Firewall functionality is limited: failed to load AFW.SYS driver."

I'm using the free Outpost Firewall which I downloaded from the Majorgeeks site.

syrk
 

Answer:message: failed to load AFW.SYS driver

Go here and see if this helps.
http://www.outpostfirewall.com/forum/showthread.php?t=22526
 

4 more replies
Relevance 61.5%

I just bought the Nikon Coolpix L22 digital camera. I installed their software and when I connect the camera via USB port I receive error "MTP USB Device failed Nikon DSC Coolpix l22-PTP.
I am running Windows 7, 64 bit, 8GB RAM, AMD Athlon Dual-Core processor 7550, 2.50 GHz

Answer:Device Driver failed

Hi,Try the Troubleshoot compatibility, and see does it works with XP Because some programs(drivers) doesn't work with windows 7 and worked with windows xp...You have the user manual for that model hereHope this help Max

4 more replies
Relevance 61.09%

I am unable to install iTunes on Windows 7 on a Dell Optiplex 780. It always errors out as "apple mobile device service failed to start" and then installation always rolls back. One result told me to remove all apple software on my computer, but I do not have any apple software installed, it always fails to install. a few websites mentioned to make sure that my iPod is not plugged into the computer when installing, I unplugged it, it made no difference. and there were websites telling me to just manually start the service, but every time I try I get a "unable to start service. the service did not respond to the start or control request in a timely fashion" which pops up immediately. I also tried doing an SFC /scannow but it says "there are no integrity violations"

I am at a loss here. I even tried various alternatives to iTunes which all give errors of their own

Any ideas?

Answer:"apple mobile device service failed to start"

Hello mate now I don't have a an answer but my partner has a very similar problem on her laptop - an annoying message t say that Apple Push has stopped.

It did get a little better by running these
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f and /r in the command line as per Option2 by better I mean it got less frequent.

To be honest I am not an Apple fan and it seems to me it clutters everything up

1 more replies
Relevance 61.09%

"OMCI system driver failed to load on start up." Source: Service Control Manager.

I have had this error message appear repeatedly over the past 2 months or so.

More recently the following also fail to load:
PCIIde
ViaIde

Windows (XP SP2) also often fails to start, sometime failing after the Windows logo screen has run, sometimes it doesn't get that far. Hitting the power and re-trying works...

Any advice appreciated.
 

Answer:System driver OMCI failed to load...

Kservice
and
PC tools Anti-Virus Engine (now uninstalled)

Also have frequently hung on starting.

Another recent error:
"The Messenger Sharing Folders USN Journal Reader service service failed to start:
...The service did not respond to the start or control request in a timely fashion. "

Another recent error
"An error was detected on device \Device\Harddisk0\D during a paging operation."

and

"The device, \Device\Scsi\JRAID1, did not respond within the timeout period."
 

3 more replies
Relevance 61.09%

I have this previous problem... you need not read this for this current problem though
http://www.techspot.com/community/topics/bsod-upon-non-safe-mode-booting.212365/

I run on Windows 7 Home Premium 64-bit.

I want to install a newer update on my ATI graphics video driver. So I downloaded the one that suites mine which is AMD Catalyst Software Suite Omega (14.12) (for Radeon HD 6000 series) and during installation it says "Failed to load detect driver" and stops. Now I don't know what to do.

This is my first time downloading this so there are no programs like this in my "currently installed programs". I tried uninstalling the driver in the Device Manager but it just reinstalls back(when I scan for hardware changes). Thanks for the reply!
 

Answer:AMD Catalyst Failed to load driver detection

Is this a desktop PC or a laptop?
 

1 more replies
Relevance 61.09%

I tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!

Answer:Driver WUDFRd failed to load - Event ID 219

It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):

3 more replies
Relevance 61.09%

the motherboard is an msi 760Gm-E51
I went to msi website and downloaded the drivers for the motherboard because the system was crashing. I thought it was probably caused but the graphic driver but when I uninstall the driver and tried to run the ccc install again I still get failed to load detection driver. I tried using ddu to totally uninstall the current graphic driver but that didnt work.
I dont know what else to try to get this computer working

Any help will be great thanks in advance.
 

Answer:ccc failed to load detection driver with new install of win 7

Did you try the Factory install disks.? I only downloaded a few drivers once & it messed up my Win7 PC. I am sure you will get help from one of our great Tech Gurus on this forum.
 

7 more replies
Relevance 60.68%

Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 750 @ 2.67GHz 37 C
Lynnfield 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD P55-GD65 (MS-7583) (CPU 1) 35 C
Graphics
SyncMaster ([email protected])
ATI Radeon HD 4770 (XFX Pine Group) 51 C
Hard Drives
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 37 C
Optical Drives
HL-DT-ST DVDRAM GH22NS50 ATA Device
Audio
Realtek High Definition Audio

Have tried to resolve issue with Canon powershot S50 connected by USB no longer functioning with W7.
On occasions the only response is the pop up message driver device failed to install.
The camer is recognised under " Device and Printers" When I trouble shoot response is to visit manufacturers site and download driver - not required under Windows compatibility listing.
Have gone to Device Manager and removed all reference to Canon Camera under Portable devices but get same re... Read more

Answer:W7 + device driver failed to install

16 more replies
Relevance 60.68%

I have tried to fix this issue. I have Mobile Intel 965 Express Chip Set Family showing the Yield sign. I keep getting the Device Driver Failed to start and the picture is distorted and make the computer very slow. Is there a fix?

Thanks

More replies
Relevance 60.68%

I installed the Vodafone and AT&T Wireless WAN (HSPA) Driver for the  Ericsson F3507g Mobile Broadband Minicard Composite Device 7uwc48ww.exe but the computer does not find the driver. I've tried this reinstall and stall no luck. ATT has check the SIMM card. 

More replies
Relevance 60.27%

Hello,

Can someone please help me find out what driver or service 'ksop' is? Or, how to fix it?

I've been troubleshooting my Windows 7 laptop to try and find the cause of random, sudden shutdowns and a bunch of 7026 and 7001 errors. This 'ksop' error pops up every time I reboot.

I tried clean-booting, SFC, CHKDSK, etc, but I can't narrow down a service as the culprit. I tried Googling 'ksop' but I couldn't find anything that explained what it was, or a record of anyone else asking about this issue.

Anyone out there have any idea?

Here's the event info:

Log Name: System
Source: Service Control Manager
Date: 3/22/2015 12:59:37 AM
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
The following boot-start or system-start driver(s) failed to load:
ksop

System
- Provider
[Name] Service Control Manager"
[Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}"
[EventSourceName] Service Control Manager
- EventID 7026
Qualifiers 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[SystemTime] 2015-03-22T07:59:37.826903400Z" />
EventRecordID 220852
Correlation
- Execution
[ProcessID] 548
[ThreadID] 620
Channel System
Computer *********
Securit... Read more

Answer:Event ID 7026: 'ksop' driver failed to load?

So far all I've been able to find out is that 'KSop' is a pool tag, and it's associated with something related to Windows 7. I still don't know what driver it's for, how to find out, or how to fix.

If anyone has any ideas, clues, or suggestions, it would be greatly appreciated. Please, I'm at my wit's end!

3 more replies
Relevance 60.27%

I am attaching a screen shot of the Kernel-PnP Event 219 that suggests that a device driver is failing to load at start up. I have been receiving this message for about three weeks and can't relate it to any particular event on my computer. I have trawled the net and had a look at Device Manager but I can't ascertain which driver is not loading and presumably needs to be updated.

I downloaded some software called "Driver Manager" and that has identified 28 out of date drivers. To correct the problem I have to pay a subscription that I can not really afford. Can someone help me identify which driver is causing the problem please?

Answer:Kernel-PnP Event ID 219 Driver failed to load problem.

Judesman, I don't recommend paying a subscription as you can get the drivers yourself. That seems to be a plug n play device, look ath the user action section in this link Kernel ID 219

9 more replies
Relevance 60.27%

Hi all.

My pc has been hanging randomly and I have to use the power button to shut down/restart.

I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.

I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.

A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.

Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).

Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.

I've run the following tests so far here

I have no driver issues showing up in Device Manager, so that looks ok.

Please advise. Thank you.

Answer:The following system start driver(s) failed to load: mbmiodrvr

I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.

Do you have that application installed, or some other temperature / fan speed monitoring sw?

Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.

Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)

If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup

Bill

5 more replies
Relevance 60.27%

Hello all.

After getting my FF7 set from a friend a couple weeks ago, nostalgia kicked in and I got his FF8 copy also but I'm having problems with it. I also have no problem playing FF7.

Installing it goes along with no problems till the end, where it says "Failed to load custom driver" and it goes to desktop. I try to start the game and same thing. I got the 1.2 patch but am unable to install EAX because again it says failed to load custom driver. What is going on?

Windows XP Home Edition
Pentium 4 2.2 Gz
256 RAM
Intel 82845G/GL/GE/PE/GV Graphics Controller
 

Answer:Final Fantasy 8 (PC) Failed To Load Custom Driver

13 more replies
Relevance 60.27%

Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:

Windows failed to load because a critical system driver is missing or corrupt.

Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys

Can anyone shed some light on how to resolve this?

Thanks,

Evan

Answer:Windows failed to load b/c driver is missing or corrupt

: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various

Go to website of that company and try to download driver.

You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.

Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.

1 more replies
Relevance 60.27%

my friend already finished installing windows 7 ultimate..it works well but he always get the error message "SlowDownCPU Failed to load hardware monitor driver" each time when he start the computer.he already looked at his device manager but there is no indication that his driver is missing or error..but the most important thing, there is no problem with his computer n it functioning well..so anybdy can help me? what the message is all about? how to solve it..or if cant solve it,then how to turn off that error messge..he use desktop, n i not so sure about his computer specification..thnks

Answer:SlowDownCPU Failed to load Hardware Monitor Driver

SlowDownCPU.exe Windows process - What is it?





Quote:
Important: Some malware camouflages themselves as SlowDownCPU.exe, particularly if they are located in c:\windows or c:\windows\system32 folder. Thus check the SlowDownCPU.exe process on your pc whether it is pest.


In your case, I don't think its a virus as stated above, as if the virus was doing anything its designed not to notify you about it.

First, open the start menu, and in the search box, type in

Folder Options

and press enter. Navigate to the 'View' tab. Check 'Show hidden files and folders'.Then tell him to navigate to C:\Windows and in the search box, type in 'SlowDownCPU.exe'. See what results come up. If there are none, there is no virus affecting system files. If there are results, we will guide you step by step.

EDIT: To stop the program starting up at boot, in the search box type

msconfig

and press 'Ctrl' + 'Shift' + 'Enter'. In the 'Startup' tab, uncheck anything to do with 'SlowDownCPU'.

5 more replies
Relevance 60.27%

I have seen this event several times in the Event Viewer program. Is it something that I should be concerned?

Answer:The following bootstart or systemstart driver failed to load: Rawdisk3

Do you have a portable drive or flash stick plugged in during this time?

Please post back a screenshot of Disk Management - Post a Screen Capture Image
showing fully scrolled, after this error next appears and without touching anything else.

2 more replies
Relevance 60.27%

I recently had malware installed on my computer called Antispycheck and I just got it removed but now my disk drives are missing from "My Computer." When I go to "Device Manager" all three drives show up, but they have the exclamation sign next to them, when I right click on it and go to properties, it says "Windows cannot load the device driver for this hardware. The driver may be corrupt or missing. (Code 39)." I uninstalled the drivers and restarted Windows, Windows found them and installed them, however, they still did not show up in "My Computer" and still had the same error message under "Device Manager." Any help with this problem will be greatly appreciated. Thanks in advance.

Answer:Cannot Load Device Driver

You can run this little app. by Doug Knoxhttp://www.dougknox.com/xp/scripts_desc/xp_cd_dvd_fix.htmOr you can edit the upper and lower filter keys after backing up \your registryhttp://support.microsoft.com/kb/314060 http://support.microsoft.com/kb/315345http://www.geekstogo.com/forum/index.php?a...&showfile=8

2 more replies
Relevance 60.27%

problem : windows can not load the device driver for this hardware.
the driver may be corrupted or missed.(code 39). Have Vista Home Premium.

More replies
Relevance 60.27%

OS: Windows Vista Buisness Edition
Device: Zen Vision M

Hi guys, I've had this Zen for almost a year now, it docks jst fine with my win 2000 rig, however it fails to work with my vista laptop.

I plug in the Zen, the "installing device driver" icon comes up in the sys tray, after a few moments it says "driver install failed."

It recognizes it as a MTP device when it is loading.

The zen screen shows it as "docked."

Help!!
Gimpster
 

More replies
Relevance 60.27%

Windows says device driver installation failed for hp laserjet 1012. This despite printer working correctly. Every time on reboot I get this message. How do I stop windows from trying to install driver for a working device???

Answer:Windows says device driver installation failed

You have to reinstall your printer drivers or you're probably going to continue to get the error. If you are unsure how to go about updating your device drivers for the printer, I would suggest you start here:

What are device drivers? A quick device driver installation guide.

good luck.

2 more replies
Relevance 60.27%

Periodically, I get a message which states:C:\Progra~1\Symantec\S32EVNT1.DLLAn installable Virtual Device Driver failed Dll initialisation. Choose close to terminate the application.I think this happens when my screen saver starts.i have recently uninstalled Norton antivirus as I was getting problems with my PC looping on shut down, I believe this was due to "common client" updates not installing.Any ideas please?

More replies
Relevance 59.86%

Hi,I have a Lenovo Thinkpad W520 (4284-A43).Today I updated my wlan driver to the latest version using this file: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1w218ww_s32.exeAfter that update the PC crashes every time i connect to Internet using a Nokia Lumia 925 with internet sharing.I have WIN7 32bit.Woraround: rollback of WLAN driver. Currently, I have release 14.3.0.6 (Intel Centrino Advanced-N 6502) and it works without problems.Same issue found on Internet where an other using is using a Motorola 4G device:https://community.verizonwireless.com/thread/788831I hope this is useful.I think you should advise Intel.CiaoMirko

Answer:New Wlan Intel Driver and 4G/LTE mobile device (Internet sharing/hotspot) - crash problem

Hi there. I have the same problem.  My ThinkPad X220i crashes every time I connect to Nokia Lumia 720 Internet sharing. Connection to iPhones and other hotspots work flawlessly.  Pretty disappointed with ThinkPad, a big name for high performance for business purposes. Does anyone perhaps know what driver I should use to solve this problem?  Many thanks in advance! 

1 more replies
Relevance 59.86%

File: \windows\system32\drivers\ltoxvyo.sys

status: 0xc0000225

Vista Home Premium.

need some help on how i can get this machine functional again.

i do have the vista installation disc unfortunately due to the short length of the SATA connectors from the power supply they simply do not reach the ROM drive while being connected to the hard drive at the same time.

if anyone needs any more info just ask.
help would be much appreciated,

Answer:(Failed to load because of a critical system driver is missing, or corrupt)

Hello and welcome to the forum...

Can you tell me if you can get to your main desktop if not have you tried to boot in safe mode. Here's how to boot in safe mode just in case.

Safe Mode

But please let me know if you can get to your desktop.

Tom

3 more replies
Relevance 59.86%

hi, basically I have an Acer Aspire 5738Z notebook it was going a bit slow recentley so I decided to wip it clean and start again, before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot. I thought this was my chance to wipe the whole think clean (using Alt+F10, acre Erecovery management) so I started doin it and after 17 long hours of the progress being stuck on 82% I decided it was time to turn of the computer and try it again, which I did and the whole thing was completed fine but when it restarted it came up with the message "windows failed to load a critical driver is missing or corrupt" and attempted to restart and try again only to be greeted with the same message again!

I have no windows 7 DVD but after a few hours of scratching my head I realized that my brother has the exact same laptop so I made a system repair disk from his laptop to use on mine... only to find that "startup repair cannot fix this computer automatically" and now it boots up but gets stuck on the windows logo screen and I've currently been there for almost 3 hours!

Can anyone help me please the laptops only a year old and I can't really afford the cost to get it fixed professionaly any help would be greatky appreciated... Thanks in advance guys!

Answer:windows failed to load critcal driver is missing or corrupt...help!

Bump!

6 more replies
Relevance 59.45%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 59.45%

"The installation failed because a function driver was not specified for this device instance"
I received this message while installing a USB driver. I have an 80GB External USB 2.0 hard drive attached that was working great a few days ago. I logged on one day to find this device "unrecognized". When I checked the device manager, it said that the driver was missing (?!). I searched for the driver on the MS website, and the device manager seemed to find a suitable one, but upon install I got the message above.

I found the old driver on my system which seemed odd to me, deleted it, tried to reinstall and received the same message.

I understand that USB 2.0 is backwards compatible, plus it was working previously, so it seems strange that it suddenly died.

Any help is greatly appreciated.

BOB
 

More replies
Relevance 59.45%

Hello
I recently bought a MP3 player to run with an Athlon 2000 Win98SE PC. The software on the disk that came with the player is for XP but like the man said 98 drivers can be downloaded from Samsung site. Did this, the downloaded file was supposed to be self extracting but not so, however opened with Winzip to desktop.First tried clicking on file mtpsmgr.exe., some sort of loading menue flashed across the screen so quick could not read what it said.
On reboot device software would not load so went to Device manager, device shows as being there but no drivers loaded.when clicking "update driver" and pointing loader to each of the 11 downloaded files in turn get message "windows cannoy locate driver". I seem to remember the same problem about a year ago with a card reader via a downloaded file which I gave up on.
I am running USB printer, keyboard and camera but these came with 98 drivers on the a disk so there could be an issue with downloading drivers that I am not aware of. Sorry if this message goes on a bit but I am unsure what is relevant.
Can any one help
Regards Ionica

Note, As a newbie I was told to use not more than two lines for signature, not sure what this means so apologies if I have done it again
 

More replies
Relevance 59.45%

Bought a new Toshiba satellite 2 day's ago. Put cd in and it won't play and i can't even find the cd rom in my computer. New to vista so i have no idea what to do. I went into the device manager and it showing the yellow exclamation point and this is what it says:

"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"

I tried to just update it but that doesn't work.

Any suggestions?
 

Answer:Load CD, Tells me I need a device driver

Is the machine capable of getting on line? Have you tried to get to Toshiba's web site?

A-N
 

3 more replies