Computer Support Forum

WD external hard drive not initialized.

Question: WD external hard drive not initialized.

Hi, thanks for trying to help me with this.

I recently moved and had my external hard drive disconnected and in storage for several months. It is a Western Digital model# WD500H1U-00. It has a separate power supply. There is a blue light on the front that is illuminated all the time, except when I connect the HD, then it will flash. When I got unpacked I hooked it up to my desk top and the computer would not access it. I then tried to install it on my laptop with no success. Since then I purchased a USB cord, with no luck.

This hard drive has a LOT of irreplaceable information on it. Formatting it is not an option.

Kevin at SpywareHammer.com was helping me with some other stuff and suggested I:

Regarding the ext HD, try this please:

1) Control panel===>administrative tools===>computer management===>Disk management

2) You'll Should see a list of Disks, Is Disk 1 listed with no partition letter assigned? if so continue

3) Right mouse click into the disk field, select Change drive letter and paths ===> choose a letter from the drop down, select OK. the HD should now be available.

No luck here either. When I right click on the disk field nothing happens. When I right click on the title block(?) I get: Initialize Disk (faded), Offline, Properties and, Help.

Kevin suggested I have you guys take a look at it.

Here are a couple of screen shots.

Attachment 316989

Attachment 316990

Relevance 100%
Preferred Solution: WD external hard drive not initialized.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: WD external hard drive not initialized.

I also downloaded "MiniTool Partition Wizard Home Edition". That program did not recognize the HD.

9 more replies
Relevance 89.38%

Hi,

My problem is as follows:
External Hard Drive (1Tb WD Elements) that I've been using for a few months now has data on that I would very much like to keep.
It was working fine until yesterday in which I tried opening a VS project which became unresponsive, tried closing everything down and turning off computer which just froze the computer leading to a hard reset (button held for 5 seconds)

Since then the External Hard Drive has not been shown in Windows Explorer and in Disk Management is shown as "Unkown" and "Not Initialized"


The Drive will still be seen correctly in Device Manager and if uninstalled it will say it has correctly installed and is ready to use.


Attempts to recover data or Initialize the drive have not worked and I have followed and looked up multiple ways to recover and other similar cases. I'm fairly certain for the data recovery the drive needs to be initialized (which just throws me an I/O error upon attempting the process) as looking at the Volume section in the properties of the device the size of the drive is listed as 0Mb.


My Last resort is taking it to a data recovery shop and hope they can grab the stuff on there.

Any help is muchly appreciated thanks.

Answer:External Hard Drive Not Initialized

I'm not up on WD Elements. Did that HD come with a form of Smartware, and in that Smartware, was there a utility that would come up and either ask you to type in the user-assigned password or it would automatically type in the saved password and pass same onto The System -- and unlock the WD Elements? I ask because I'm a little familiar with WD Passport, not WD Elements.

2 more replies
Relevance 89.38%

Hi all,

I'm having an issue where my external hard drive (WD Passport Ultra 2TB) is not displaying in my computer and is not initialized in Disk Management. This occurred after my computer crashed while I was pulling out data from the external hard drive. Now when I plug in the external hard drive, it has a clicking sound for a few seconds then stops with a blinking light.

I have tried using the MiniTool Partition Wizard and it does not detect it. When I open up Disk Management, it says that I need to initialize the disk before I can access it. I read somewhere that I will lose my files if I initialize this, so I have not done so. The Disk Management also does not show any unallocated space in it. Please see attached image.

Currently I just want to take out all the data from this hard drive before I let this drive go if I can't save it. Is there any hope for me to save my files?

Best regards,
Jeefster

More replies
Relevance 88.56%

Hello,
first of all I would just like to point out that I am not a native speaker so I apologize in advance for the mistakes I might make.
I have a problem with my external hard drive. The drive is Verbatim 47512. Last year I unplugged the drive without safely removing it first. When I plugged it in again it asked me to format the drive. As I didn't wanna loose my files I tried using Recuva and it worked. However, the process took too long and I was leaving for ten months the next day so I had to stop the process. I wanted to continue when I got back but the drive wasn't working at all. I couldn't even turn it on. I kept trying and after some time it started to work again. When I plug it in, I can't find it in my computer. But I can find it in the disk management. I'm attaching a picture, it says it's uninitialized and that it needs to be initialized. I don't know what it means and I'm scared it might delete my files. It also says that it's allocated and unknown. https://postimg.org/image/zci27fe6h/
I downloaded MiniTool Partition Wizard and it says that my disk is bad. I don't know how to proceed, can you please help me? Or should I give up?
https://s3.postimg.io/mkjzqz85f/Bez_n_zvu.jpg

Answer:External hard drive- not initialized, allocated

Welcome to the forum if it's blank it's lost the partition you need specific partition recovery software you don't want normal recovery once the partition is recovered file should be there if you Google free partition recovery there is lots of good free ones

1 more replies
Relevance 88.56%

I have a external hard drive that's not initialized, but it recognizes with a messages pops up saying my drive is ready for use, but it doesn't show up under My Computer. I have a Windows 7 desktop PC that is a Home Premium 32-bit Anytime Upgrade. I'm thinking it's not fried, and I'm thinking that way because I received the message it found new hardware and ready to use? Or is it dead?

Also, I don't have a spare enclosure, and tools to open it up, so taking it out of the enclosure would be out of the question.

Thank you for any help!
 

Answer:Solved: External hard drive not initialized?

10 more replies
Relevance 88.56%

hello there ,
i have a Toshiba hard drive 500 GB it was working fine but suddenly when i plugged into my laptop i discovered it is not working and when i go to disk management it said Disk 2 unknown and not initialized.
i tried to plug it in another computers but nothing changed.
i have many thing in that drive i need them so could you please help me ?
 

Answer:my external hard drive is unknown and not initialized

I assume you have tried another usb cable; that is the very first thing to do.
If you have already done the above, then the next thing I would do would be to pull the drive out of the enclosure and connect it as an internal drive. Note you must have a working desktop to accomplish this task. If that does not work, you can send the drive to a data recovery shop. This last step is NOT cheap so get an estimate. A simple recovery using software can run $250 or so plus the cost of whatever media you want the data copied to AND it goes way up from there.
i have many thing in that drive i need them so could you please help me ?Click to expand...

Data you do not backup is data you do not care about AND you should expect to lose said data. All drives fail; it is only a question of when your drive will fail.
 

2 more replies
Relevance 87.33%

Hi Jumanji,

My external HDD (WD) is not getting recognized in my laptop from last few weeks. I have followed different threads but didn't get any working solution.

I have tried below options:

1. Disk management : Initially showing MBR/GPT options but none worked. After that its showing my external HDD as 'Disk1 unknwon not initialized'.

2. MiniTools Partition Wizard : Installed MiniTools Partition Wizard v9 in my laptop however my external HDD is not showing in the tool as Disk2.

Could you please help me to get the issue resolved or recover the data at least.


Many thanks !!

Answer:External hard drive is showing 'Unknown Not Initialized'

Welcome onboard.

External HDD - Western Digital Model No/Name: ? Capacity : ?

Please post a screen shot of Windows Disk Management with only the faulty external connected. Disk Management - Post a Screen Capture Image

2 more replies
Relevance 87.33%

Guys please help me to fix my hard disk WD elements 1TB

I have tried so many ways to fix it.. but I got nothing in 4 days!!

I have tried from command prompt " chkdsk /f /r "
the first time I tried it works, but something error occured, and now I can't using that method..
when I tried to using that, just show " cann't open volume for direct access"

my hard disk didn't appear on my computer list, but I can reject it.

and anyway I have tried to using minitool partition wizard, but you all can see that my hdd didn't appear with the volume.. just show up disk 2 with 0.00 GB

Anyone can help me to solving this problem ?

btw, My english isn't good enough..but I hope all of you can understand what I mean

Thanks before.!

Answer:External hard drive disk unknown n not initialized!

Sorry to say your WD Elements is dead and you have tried everything.There is nothing left for me to do, honestly. I would have done the same thing before declaring it dead.. No DIY data recovery is possible. The only option open to you is to entrust it to Western Digital Data Recovery partners in your region. Check with them whether there is any hope of recovering data in good shape.Telephonic consultation is free.

https://support.wdc.com/Warranty/dat...y.aspx?lang=en

7 more replies
Relevance 87.33%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

Answer:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Relevance 87.33%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

Answer:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Relevance 86.51%

Hello. Through the power of google, I have come here to see If I can get any help recovering data. Essentially found this thread: disk 1 is unknown, not initialized, unallocated and just having really similar issues.

Issue is with my sisters External Hard drive, a WD My Passport Elite 070B.
Asked her a few questions on how she was using the drive/any issues and she explained that she had to pull the usb plug while still reading/writing because it would hang/freeze (/facepalm)

Downloaded PW Minitool Recovery and EasyRecovery Pro Trial, but haven't really run any lengthy tests yet. Just tried them out for 10 mins to see if anything would show up. Going to leave the computer on tonight and do a full scan though.

Some other things I have tried:
-Tried connecting it to other PC's/Laptops(XP/Vista/Windows 7/OSX). Same thing.
-Tried different USB cables

Any suggestions or things I should try?

Answer:Unaccessible External Hard Drive: Disk 1 Unknown, Not Initialized

I'm facing the same problem too....
Un-detection of my ext BUFFALO MiniStation HD-PCTU3 3.0

9 more replies
Relevance 85.69%

Have a 1TB Iomega USB3 external hard drive that worked well on both a desktop and laptop Win7/64 system. Now it shows up as unidentified and not initialized using computer/manage/storage/disk management. Disk Management also gives the optiin to initialize it but I declined because I would like to recover the data. The power light comes on and it spins up with both a USB3 or USB2 connections and is identified as an Iomega eGo drive when I use the USB eject function.
Hard Drive Sentinel does not recognize it at all. Any suggestions appreciated.

Answer:Previously functional USB3 external hard drive shows not initialized

1. Please post a screenshot of Disk Management with your external HDD plugged in. Disk Management - Post a Screen Capture Image

2. It would indeed be prudent to recover the data before you try anything else on the HDD.

You may try to access the hard drive booting into a live Linux CD/pendrive.

Download Lucid Puppy (Ubuntu-Compatible Build) v5.2.8 ISO from http://puppylinux.org/main/Download%20Latest%20Release.htm

It is light and only 132.6 MB.

Make a Bootable pendrive with Rufus v1.3.2 (442 KB) http://rufus.akeo.ie/

It takes less than 2 minutes to create your bootable live Linux pendrive.

For more guidance on the recovery process directly get into the heading Recovering files from the non-bootable Internal Drive - applicable to recovery from any hard drive - in Lucid Puppy way to recover files from a non-bootable computer

You may also use this tutorial by Golden http://www.sevenforums.com/tutorials/256518-peppermint3-create-live-cd-dvd-usb-use-emergency-backup.html to create your bootable pendrive with Peppermint3 Linux.

Lucid Puppy or Peppermint3, in either case you can use Rufus to create your bootable pendrive.

9 more replies
Relevance 75.03%

I have an WD 1TB hard disk which failed to initialize recently. It gives me an I/O error message. I found a few old threads here with similar problem and tried out the suggested steps. I ran WD diagnostic tool and passed the Quick test and Extended test(Screenshot attached). I would like to avoid the zero test and formatting of my data if possible. The hard disk is almost full and recovering them after formatting would be really painful. I would be really grateful if someone could please help me out?

Answer:1TB WD external hard disk not initialized

Is you have a empty hard drive kicking about or somewhere to store you data, move it all to there.
Then format you drive, see if that works.

9 more replies
Relevance 74.21%

I am using windows 8 and I have read previous threads with similar issues that I face but my problem is unique. My 60GB external Hard disk was manufactured by FUJITSU and was taken out of a dell laptop. When I bought a case for it yesterday it was tested in a laptop computer to see if it was working before I paid for the case and it was working properly. However, the owner of the laptop removed the cable without safely ejecting the drive first. Later, I connected it to several computer and it would install and be detected in Device manager, Disk Management and even devices and printers but it does not show in My Computer nor does autoplay options pop up. In disk management it is shown as Disk 1 unknown not initialized as shown in the attached screenshot.

I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up

when I right click the Disk 1 the initialize option is gray and only offline, properties, and help are available. I used mini partition tool and this is what i get

I am at my wits end. Please assist. I do not need what is inside the hdd. I just want it to work.

Answer:External Hard disk not initialized, unknown.

"I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up"

Did you try initialising it as an MBR disk?

5 more replies
Relevance 74.21%

I see the external disk in Disk Management but it is not getting displayed in My Computer nor any data recovery software is detecting it :(
Image attached..
When I right click on disk 1 Initialize Disk option is also disabled.

Please help!
-Zia

Answer:Seagate external hard disk not getting initialized

What are the other options when you right click on the disk?

4 more replies
Relevance 72.98%

Hello to All,
I have a 500 GB external USB drive that I can't access on my wife's Windows 8.1 laptop. I have confirmed that is in good operating condition on my XP PC where I can access all my files but in Computer Management on the Windows 8.1 laptop it displays as Disk 1 with a red arrow pointing down and it says Unknown and Not Initialized. Can someone help?
Thanks
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 7908 Mb
Graphics Card: Intel(R) HD Graphics Family, -1984 Mb
Hard Drives: C: Total - 940362 MB, Free - 902392 MB;
Motherboard: Dell Inc., Inspiron 5537
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

Answer:External USB Drive Unknown and Not Initialized

With the USB drive plugged in, go to Control Panel > Device Manager. Then see if there are any yellow exclamation marks. Try right click, update driver.
 

3 more replies
Relevance 72.98%

Can you help me? I got the same problem, sometimes my external driver say it was online, not initialized and some times it RAW, i was watching a movie but i kicked my external driver so it was forced to unplug, since then when i want to plug in it again the driver can't show up
Well this is my friend external driver and inside it my friend have 300gb files please help me

Sorry for my bad english

Answer:external drive say it was online, not initialized, and sometimes RAW

Hi andremarb,

Welcome to SevenForums.

From the description of your problem, I would think that the cable could have got damaged due the unceremonious kick that the HDD received. So as a first step use a new cable and check how your external drive behaves.

If the problem persists, please start a new thread explaining your problem in detail. Furnish full details of your external drive make/manufacturer/ Model /Capacity along with a full screenshot of how the drive appears in Windows Disk Management. Please adhere to the guidelines here Disk Management - Post a Screen Capture Image

In the new thread, even if it is not me - so unreliable these days , some one else can address your concern. So move on with the new thread.

EDIT: Just noted that your post has been moved on to a new thread. But this post still holds - more details and screenshot after changing to a new cable.

1 more replies
Relevance 72.98%

Hi,

I'm new to this forum.

My external hard disk (Seagate) is detected in the task bar after connecting, but not visible in "My Computer".

It is visible in Device manager under Disk Drives but not under USB.

There are few threads in this forum which are similar to mine, except that their Drives are visible in the Disk Management as Unallocated Space, mine is not.

SEE ATTACHMENTS !!!!!!!!!

I've tried all tools, tried in Windows XP still no solution.

Is there any way to atleast recover the data !!!!!!!!!

Your reply is appreciated !!!!!!!!

SEE ATTACHMENTS !!!!!!!!!

Answer:External Hard Disk, Unknown, Not Initialized ! No Unallocated Space.

Hi Pradeep,

Welcome onboard.

" I have tried all tools" - can you please enumerate what all tools?

Have you tried running the Seagate SeaTools for Windows to diagnose/repair.

If not check your external drive now.

5 more replies
Relevance 72.98%

Hi everybody

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

More replies
Relevance 72.98%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

Answer:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

1 more replies
Relevance 72.98%

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

Answer:FreeAgent External Hard stopped working (unknown, not initialized)

Here are the screen-shots and images again:

6 more replies
Relevance 72.98%

Hey

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:

After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.
I searched and read lots of threads and tested some other stuff:

(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

Answer:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

7 more replies
Relevance 72.16%

It is my brother's hard drive & it has very important data related to his working. It is a 2tb WD my passport ultra external hard disk which was used as NTFS with only one partition.
My brother told me that he deleted some data from the drive by mistake and was recovering the data from the drive but all the windows recovery programs he used just hanged after few minutes (which is also a sign of bad sectors). Then he done the blundered mistake by formatting the drive, the formatting also not completed due to hang situation.

Now the current situation is that the drive is not showing in the windows explorer and when I open the disk management ,the popup came up for initializing the disk either as MBR or GPT. When I try to initialize the disk, it gives me this error:- "The request failed due to a fatal device hardware error". I have attached a few screenshots below.

I have tried cloning the drive with clonezilla, tried booting the drive with parted magic, Hire n boot and system rescue CD but neither of them recognized the drive and some also rejected to boot with the drive attached.
Now currently i am scanning this disc for recovering the lost partition in the 'Partition Recovery Wizard' software according to the advice on some old thread here, but this software has detected my disk as 'bad Disk' in the file System column as you can see in the fifth image, so i don't have much hope with this software.

Please tell me if there is any hope left for drive like try... Read more

Answer:wd 2tb external drive - unknown, not initialized and unallocated

Hello nsingla and I am sorry you and your brother have this problem!

Things don't look so good now. You've done and tried a lot with aim you need, still looks like the drive's partition table and/or file system are corrupted to a stage that prevents other software to work correctly onto the drive.

I could additionally suggest trying to scan and repair the drive. Try downloading the WD ultra Drive Utilities for Windows and see if you could repair the drive:

Support Answers

If nothing works, the drive is probably too damaged and beyond repair. Hope this is not the case. But perhaps the worst part for the drive was the formatting attempt. Which, by definition, would delete everything from the HDD.

Good luck and post back with results!

CK_WD

4 more replies
Relevance 72.16%

This drive was originally a Maxtor back-up drive that my brother in law could never get to accomplish a successful back-up routine when running on his XP desktop system or his new Vista laptop. He gave it to me and I installed upgraded software and tried it on my Vista x64 system and again recieved "back-up failed" error messages. I decided to delete all contents on the drive and use it as a basic external storage drive. My problem is now my system see's it as "Drive not yet initialized". How do I initialize this drive?It's a Maxtor One Touch III, 200 Gb. 

Answer:Disk not initialized when trying to format external USB drive

Do it thru Disk Management...right click My Computer...select Manage...then Disk Management.

1 more replies
Relevance 72.16%

This quick new hard disk. So sad I cant access it anymore? why this happen?

You can see from the photo MY computer cant even see this driver anymore, so I check on the
- Disk management it said unknown no driver letter too ,Not initialized.
-Click Initialized it said i/o device error

I have try uninstall the device and restart let it install again still the same.
Checking many thread have the same problem, I wonder anyone solve this kind of problem before?
--------------
Update the possible cause of it, I believe my external hard disk spoil because my laptop was low battery and suddenly off either it goes Hibernate or off there is no time to read or write in the hard disk.
Then I just unplug the external hard disk.

If you face this situation don't unplug it, turn on the computer back and do a proper remove or shut down everything.

Answer:1TWD external hard disk unknown,not initialized,unallocated,i/o error

Is this an external drive attached via a USB hub ??

9 more replies
Relevance 70.11%

Hey everyone. So I had a server that stopped working, so I removed the hard drives and am trying to access them from a different computer but disk management wants to initialize them...which will erase my data. How can I recover it?
 

More replies
Relevance 70.11%

I just bought a new hard drive(WDC WD2500JB-REA0) and when I go into Disk Management thats what it says and I have no idea what it means. I got the hard drive to work fine on my other computer and its not working on this one. On this computer I have an ASUS A8V-Deluxe motherboard with the BIOS fully updated. When I try to initialize it nothing happens.

My IDE setup reads as follows:

Primary Master: Quantum FireballP AS40.0
Primary Slave: WDC WD2500JB-REA0
Secondary Master: HL-DT-ST DVD-ROM GDR8163B
Secondary Slave: Quantum Fireball CX13.0A

Normally in a situation like this I would backup everything since I have my computers networked and start from scratch on my new hard drive but I cannot find my Windows XP CD so this is what I have to work with.
 

Answer:Hard Drive not Initialized

Do you get an option to format the volume?
 

5 more replies
Relevance 69.29%

Yesterday while using my computer my secondary drive / storage drive disappeared. I can see it in Disk Management, but I tried to use MiniTool, but it cannot see the drive. I have attached a screen shot for more info.

Is it KIA or recoverable long enough to save a couple files at least?

Thanks!

More replies
Relevance 69.29%

If anyone can help me figure this out i am stumped. Pictures to help explain my situation. I have 3 hard drives that are not showing up in my computer but is showing up in Device Manager. They show up as "Disk 1 Unknown Not initialized". I cannot loose the data on the drives. in Diskpart it shows only as a drive and says 0gb meanwhile 2 are 320gb and the other is 2tb. Also i am connecting them via USB because they are from my desktop and my desktop wont boot off of them and neither will my laptop through bios. The drives also will not show up in Partition Wizard. The drive is spinning and has never been dropped. Also the drives do not show up in disk part as volumes. I need all of the data off the drives if possible. Thanks!

Answer:Hard drive not initialized and has data on it

Someone else will have to help you with getting your data off your drives (or, more likely, you will have to pay a recovery specialist well north of $1k per drive to attempt to recover the data with no guarantees of success, the option I would recommend since trying to recover the data yourself may permanently lose otherwise recoverable data) but, in the future, you need to backup your data to avoid this problem in the future. All drives will fail, some sooner than later, often without warning. The only way to reasonably ensure your data is safe is for it to exist in at least three places, such as on the computer, on an onsite backup, and on an offsite backup (I have five backups per drive, two onsite, two in my credit union safe deposit box, and on a paid cloud backup site). Backups need to stay disconnected from the computer except when updating the backup and need updating frequently since data not backed up usually can't be recovered. An acceptable low end plan would be an onsite external drive for each drive in use. A cloud backup plan, such as Carbonite.com, CrashPlan, or Backblaze (I use Carbonite) is an easy, fairly inexpensive way to get an offsite backup and keep it up to date (Carbonite starts at $60/month, the price I pay, and the others are similarly priced). The only caution is to use a cloud backup service, not a cloud storage service.

2 more replies
Relevance 68.47%

I searched for the title of this thread, "hard drive is no longer initialized windows 7" and found a thread here where I am following these very good instructions by jumanji:

http://www.sevenforums.com/hardware-...ml#post2386144

I could not directly download the software mentioned, but at the site linked I was able to find the software: pwfree91.exe

I am scanning now, its been scanning for a couple hours, it seems it may scan for days, not sure if it will display here or attach.

You can see how much is scanned and how much is to go, at this rate it will literally take days.

All the numbers seem correct, size and how much is used, etc, that is encouraging.

It seems the data I am trying to recover from this internal drive is in fact there.

Is this the recommended track still today, the one mentioned in jumanji's post linked above?

jdod

More replies
Relevance 68.47%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was no... Read more

More replies
Relevance 68.47%

Hi all!I've done some search on the net but didn't find the solution for this problem.I have 2 Maxtor HDD's 30 GB each, in raid0. And now I added a 120 GB HDD alone so out of the raids. But when I configured the raid setup, i accidentally said yes to 'Do you want to erase old data for the new array' or something like that. I was stupid, I know. I thought it's just the usual confirmation thing.And now I'm here with a 60 GB not initialized, unallocated drive.I thought its best not to do anything until I'm really sure about what I do.The problem is that there were some very important files and digital photos on that drive...Please, can you think of any possible free solutions to this? No matter how hard it is, or long it will take, I would even sit here for the whole night if I had to.Thank you very much for any advice on what to do.

Answer:Recover data from Hard Drive not initialized

This is the same blunder I did and you knows what? I almost lost my data. I was so tensed caz all data was lost (I thought ) But My friend suggested me a lab something called Salvage Recovery Lab or something similar to that. When I contacted I got my problem was solved. They solved the bug and got my 90% of the data back. I don?t know how but they managed to got it back. I was extremely  happy that I got my maximum data. If you want you can call at 1 203-973-0242 get your problem  solved. All the best.

1 more replies
Relevance 68.47%

Hi there,

I have a Toshiba Satellite Pro L650 and I am having some problems.

it all started a couple of weeks ago, I received the dreaded black screen of death (windows would boot, but then just come up with a black screen and a mouse cursor. After much playing around, I thought a re-install of windows would do the trick.

It worked, but none of my drivers were installed.. After much searching, I found my Toshiba repair disc. I put it in and went to fix it. Half way through formatting the drive, it came up with an error, saying that it could not delete a certain file, it then asked me to reset.

So I reset, and it came up with a screen with "This drive is not initialized, please initialize now"
So I pressed yes, and it it reset, but came up with the same screen. and over and again.

So, that's where I am at. It's only a year old, and i've already had the hard-disk replaced. I am desperate to fix, I don't want it to become an expensive paper-weight..

Answer:Satellite Pro L650 - Hard Drive is not initialized

First of all I?m wondering why the message appeared saying that the drive is not initialized? did you use the Toshiba recover disk for the OS installation or did you use any other Windows disk?

At the other hand it could be possible that your HDD malfunctions? the blinking cursor in the left upper corner is one sign for such fault?
Therefore I would recommend checking the HDD. Use a tool like Drive Fitness Test for example? it helps you to check the HDD?
If some errors will appear then the HDD should be replaced?

5 more replies
Relevance 68.47%

my hard drive is reading as not initialized and unallocated its not showing in "my computer" any1 no how 2 fix. please all my wedding pics and videos r on it

Answer:hard drive reading as not initialized and unallocated

iv got partition wizard n its stating that its read only any ideas

1 more replies
Relevance 68.47%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was no... Read more

More replies
Relevance 67.65%

Hi.

I was normally using my computer, when I suddenly noticed one of my hard drives disappeared from My Computer. Checked the Device Manager, I get the following. Trying to initialize it throws up this error:
Seems to spin just fine. Trying different USB ports failed, switching cables as well.

Already tried a few programs. GetDataBack for NTFS throws up error 1117. R-Studio also fails, as does DMDE and MTY. My friend even borrowed me Microsoft DaRT (part of MDOP), but when I boot into it, it doesn't recognize the HDD at all, no matter how hard I try. Only my W7 installation does.

Anything I can do in this situation? I had a lot of important data on it, and it's not completely dead yet. Maybe I can still save it somehow, without haivng to pay one of those data recovery thieves...

Answer:1TB WD USB hard drive failure - is in Device Manager, not initialized

have you tried wd data lifeguard tools?

since I don't know which drive you have I can't post a direct link to it for your drive but here is a link to all of them.
WD Support / Downloads / Select Product

9 more replies
Relevance 66.01%

Hello,

I have run into a problem that has been causing me quite a bit of headache as of late. A week ago, my WD Elements External Hard Disk is not displaying under hard disk drives, but does display under Devices and Printers. This is what it shows under computer management:

I have tried to initialize the disk using MBR and GPT options but failed receiving I/O Disk Error.

Please help, thank you.

More replies
Relevance 63.55%

I have a WD External SATA 1TB Hard Drive that has ~700 GB of family memories/movies/documents/etc and it is now connected to Windows 8.

The original housing it came in was unsurprisingly cheap and the connection piece broke. I re soldered it on and the connection was made but the drive threw nothing but errors. I figured I messed it up so bought an external case and assembled it. Now however, the drive does not show up under my computer but does in Disk Management.

Disk Management claims that the HD has the full TB unallocated and not initialized. I don't want to initialize it because I don't want to lose the information I have on it. Any idea on how to get this working?

I have downloaded and used the Data Lifeguard available at WD and the External has passed the Quick Test so drivers are all there and working.

Thanks
 

Answer:WD External Drive "not initialized" but has data on it?

Umm, I would try first connecting it back to whatever PC version you were using before (Assuming Windows 7) and seeing whats up.

If that does not work, try messing with the connection that you re-soldered and making sure its all done fully correctly, something may have gotten crossed.
 

3 more replies
Relevance 62.73%

Hi there,

I won't get too deeply into the harrowing saga of how two external hard drives of mine died within days of each other. Rather, I'll just say that I would like to do a virus scan on several external hard drives (including/especially the one I just got to replace the others). In other words, I want to find out if there was a virus or something in the material that I'm putting on the hard drives that makes them die. Could this be possible? If so, how can I conduct a virus scan specifically on the external drives?

Thanks!
Sonya

Answer:Scanning an external hard drive for viruses? External Hard drive DRAMA!

In My Computer . . right click the external drive and select Scan with { name of AV }

1 more replies
Relevance 60.68%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

Answer:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Relevance 60.27%

Hi guys,
I recently bought a Toshiba satellite click mini, tried to use my external hard drive but its not showing up at all. Any ideas on how to fix this?
its a Seagate 250gb hard drive. Thanks in advance

Answer:Satellite click mini not reconising external hard drive or external DVD drive

Originally Posted by rachel.nickells


Hi guys,
I recently bought a Toshiba satellite click mini, tried to use my external hard drive but its not showing up at all. Any ideas on how to fix this?
its a Seagate 250gb hard drive. Thanks in advance



Is it usb powered? If so does the hard drive spin up? Are there any clicking noises from the drive?

2 more replies
Relevance 60.27%

I want to get an external hard drive/dvd burner combo if there is such a thing. To make this question as simple as possible...I need a hard drive that my camera can be plugged into with the firewire. I also need the hard drive that is able to plug in to the USB2 slot on my computer, because
my new Dell doesn't seem to tolerate a firewire card which I installed and then took out and returned to the store. It froze my computer and I tried everything to stabilize it but had no luck. It did work long enough to download 10 min. or so of video and I burned that onto a cd. Thats when I found out I had a dvd-rom not a dvd burner......long story I know. Sorry. I just want to figure out the most economical way now to save my movies and burn them to dvd also using either another external dvd burner or maybe there is a hard drive/dvd burner combo?? Or should I just get two separate externals?
Again: I need the hard drive/burner to plug into my computer with usb2.
Then the firewire from the camera would go into the hard drive/burner to download the movies.
 

Answer:Solved: External Hard drive OR External Hard drive/dvd-rw combo?

16 more replies
Relevance 60.27%

I have an Asus Vivotab Smart running full Win8.1 and a Western Digital My Passport 2TB external HDD. The hard drive works fine on other computers running 7, 8 and 8.1. The tablet can read other hard drives fine as well. But this one hard drive will not function on just the tablet. I've tried deleting the drivers and letting Windows reinstall them as well as installing the latest drivers from the WD site. I've tried using a different cord, a different adapter and other USB devices on the tablet. The HDD shows up in Devices and Printers when plugged in but not Explorer and NOT Disk Management at all. Now if I delete the drivers it appears in Disk Management as an offline and not initialized drive, no drive letter. I can't initialize it and trying to set it to Online results in an an I/O error. When i unplug it and plug it back in Windows appears to be reinstalling it, but then it's back to not appearing in Disk Management at all.

This occurred when it was just Win 8. I upgraded to 8.1 and it worked for about 8 hours. The drive installed and functioned 100% after upgrading to 8.1.....and then just stopped working again. Same issue. Again, the drive works fine in every other computer I connect it to. Every other drive and USB device works fine when connected to this tablet. Just this one drive on this one tablet refuses to initialize.

Any ideas?

Answer:Wd External HDD Not initialized

Tablet might not have enough power thru USB, smaller devices could work and this one is probably pulling too much. If that's the case you can connect it thru an USB splitter with it's own 5V power supply but that won't make it as portable.

3 more replies
Relevance 59.45%

I have an external hard drive from home (160 GB iOmega) formatted in I believe FAT32 with all my data on it from my iMac. I'm trying to connect it to my new ThinkPad to get my data. It doesn't show up in My Computer, but in Disk Management there is a Disk 1 that has a black bar at top instead of blue, says not initialized on the side, and says unallocated under the bar. Also, when I open Disk Management it offers to initialize my disk, but I fear that would erase my data.

How would I get my computer to read the disk but not erase my data?

Answer:External HD not initialized, need data from it

Welcome to Seven Forums.
Here is a pretty good trouble shooting guide Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter - TechSpot OpenBoards You might want to try some of the suggestions posted.
Fabe

9 more replies
Relevance 59.45%

Hi,
 
I'm not even sure what the topic title should be. But I can tell you about my problem.
 
I plugged in a new Bipra 250 GB NTFS external Hard Drive with the intention of using it to clone my C Drive.  A scan of the new drive reported no errors.  However, when I tried to run AOMEI Backupper it quit with this message: 
 
Information Code:4120 
Failed to adjust partition size.
 
Although I could see the drive when I clicked on Safely Remove Hardware, I could not find the drive in Explorer.
 
In Device Manager the disk was listed as Mass Storage Device USB Device.  I tried updating the driver, but MS says the driver is up to date.
 
In Disk Management, the disk showed  as Disk 1  Basic Online.   232.88 GB  - Unallocated. 
 
Online I found information that said to right click the drive and choose New Simple Volume.  I did that. It ran. Still the drive goes unrecognized and I am unable to clone it. 
 
I tried a reboot with the drive plugged in.  When Windows started, I could see the drive in Explorer but a message said:  Location not available.
 
Well, dirty word. -- And now that is gone too and the drive once more shows as unallocated in Disk Management.
 
More info online tells me to partition the drive after running New Simple Volume. But now I'm afraid to do that, and I don't know why that is necessary. 
 
Also in Disk Management Help the in... Read more

Answer:asNew external HD not Initialized?

Can you post an image of Disk Management with the USB drive attached?
 
Edit: You can use Partition Wizard to create a partition in the unallocated space and format it NTFS.

1 more replies
Relevance 59.45%

Hello there. This is my first post at this forum.

I have a probably 6-7 years old WD Elements 1TB external HDD. When I connect it to PC via USB I can hear ordinary HDD detected sound and after that it sounds some short beeps at 7-3-3 order. Here are some screenshots of my situation. Is there any way to recover my data stored in this HDD? My priority is saving my data but saving HDD would also be cool

Help me SevenForums-Wan Kenobi you're my only hope.

OS: Win7 Ultimate x64

Answer:External HDD is Unknown and Not Initialized

Jumunji is one of the best recovery techs around! However, I can ask this: Did the computer use the Smartware and DriveUnlock when operations were aok? If so, my best guess is: get the Smartware and DriveUnlock back to the aok-days' operations.

3 more replies
Relevance 59.45%

I have a 300GB usb external hdd, when I plug it in it beeps but does not show in "Computer". I right click on Computer/Manage/Disc Management and it shows there as 298GB Disk 2 Not initialized. A box appears, saying you must initialize before Logical Disk Manager can access it. When I click on OK I get the message Data Error (Cyclic Redundancy Check)
If I go to the box to initialize it everything is greyed out.
There is nothing of any importance on the drive so if everything is lost it doesn't matter.

Answer:USB external hdd problem, not initialized.

This youtube video will help you do a chkdsk from Command prompt CLICK HERE if it works you might be able to recover the files.

3 more replies
Relevance 59.04%

Does anyone know of software that will clone one external hard drive to another hard drive. I have tried by attaching both external hardrives  to a computer but Acronis will only find the destination drive and not the source drive. any ideas would be great Ojas

Answer:Any software that will clone one external hard drive to another external hard

What kind of data is on the HDD ? ?Are you saying that Aceonis does not rcognise both externals ? ?If not you can hool up only the HDD you want cloned and have Acronis create and save the image to your internal for now...then power down...unhook that external...and hook up the blank external...power up and clone away.NOTE: I highly suggest verifying the image before cloning...takes a bit longer buy well worth it.It's under the Tools section in Acronis.

2 more replies
Relevance 58.63%

Dear,
I have an external hard disk 4TB (Western Digital MyBook 25DA My Book Series - External Hard Drive | Western Digital (WD)) with bitlocker enabled (and i know the password).
I was working on it and everything was smooth.
I restarted the PC , after it's booting and logging in to windows, I didnt found the HardDisk in "This PC", I goes to windows 10 64 bit' disk management console and a popup window appears asking me if I want to initialize it.
Any solution do you have for this?

More replies
Relevance 58.63%

Hi, i'm new on this forum. I was searching for an answer to this issue in a lot of threads but i didn't find something to fix it.

I built an external hd using the hard disk of my old laptop (Fujitsu MHV2120AH PL) and a Woxter i-Case 240.

When i connected it via USB i went to the Disk Manager and saw the unit as "Disk 1 Unknown Not Initialized". But there was something else, the disk has a size of 120GB but the Disk Manager shows only 700MB.

The Disk Manager didn't allowed me to format this partition and when I press on "Initialize disk" it didn't do anything.

I used a Linux Live CD and I had the same issue, i tried to create a new partition table but it didn't create it and GParted didn't allow me to create a new partition answering that i need a partition table first.

I tried with Diskpart without any result too.

This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.

Do you have any idea?

Answer:Unknown - Not Initialized Disk (External HD)

Hello Matterito!

You could try a couple of things: changing the enclosure, as this one's controller may be corrupt, or hooking up the disk directly to the computer.
Also, see if your USB drivers need updating.








  
Quote: Originally Posted by Matterito


This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.


Following this, it may be that your disk is just damaged. It could be just that the partition table is corrupted, so may be writing full zeros to the disk and repartitioning and reformatting it would help fix the issue. That is in the case that you don't need the information on the drive.

CK_WD

3 more replies
Relevance 58.63%

Hi,

I've been recovering data from three older internal hard drives for a friend, by way of an external HDD enclosure connected via USB to my laptop. It went well for the first two HDDs but the third, well ....

It's a Maxtor DiamondMax 10 HDD, 120 GB and is also marked SATA150.

(1) On most occasions, the HDD in question does not appear under My Computer. Under Devices and Printers, I see the external HDD enclosure as "USB to ATA/ATAPI bridge" (but not the HDD). In Disk Management, I see my internal drives and CD/DVD ROM but for the HDD in question, only "Disk 2, Unknown, Not Initialised" - I get the option to initialise it as MBR or GPT (I cancel at that point).

(2) On rare and seemingly random occasions, my laptop does pick up the HDD as drive F: but usually asks me if I want to format it (nope!). At this point it also appears under Devices and Printers, My Computer and in Disk Management as 'RAW' and 'healthy'.

(3) On three occasions, I have seen the drive name; on two occasions, all of the files - and on one occasion, I was able to copy four files across to my laptop (before losing visibility of it). So I know all the files are there.

However the HDD disconnects itself (or is disconnected) quite quickly, such that I am back to position (1) for the vast majority of the time.

I have tried TestDisk and EaseUS Data Recovery Wizard, which do not see the HDD. I have also tried MiniTool Partition Wizard, which mostly does not see the HDD but on one occa... Read more

More replies
Relevance 58.63%

Hey guys,

I have this new Western Digital My Book that I got about 6 months ago and it suddenly will not show up when I plug it in. I tried looking for solutions on what's happening but I can't get past the first few steps, until I found one where it says that the drive is probably toasted! Anyway, I'm still not giving up hope. I tried it on two computers, I tried uninstalling and reinstalling the driver but it's still the same. I tried initializing it and it's giving me "The request could not be performed because of an I/O device error". I would like to chkdsk it but I forgot what the drive letter of the hard drive, so I can't really search it.

Here're some screenshots.


Also didthis :

Thanks for your time!

More replies
Relevance 58.63%

Hi,
I have an WD Elements 1023 external hard drive which I want to connect to my laptop which runs a 64 bit Windows 7 Home Premium. When I connect the device, it shows up in the device manager and the driver is installed properly.
However, it doesnt show up as a drive and in the Disk Management, it shows as Disk1 unknown. When I try to Initialize the disk, I get a error that the "The Media is write protected".
Its been a real pain as I have a lot of data init and unable to access it.
It wud be great if anybody could suggest me a solution for this.
Screen shot of how the drive appears in the device manager
https://picasaweb.google.com/114564433723979804644/March3201202#5715608574510479554
Screen shot of how the drive appears in the disk manager
https://picasaweb.google.com/114564433723979804644/March32012#5715607129219976018
Regards
hechesspee

Answer:External HDD not getting initialized in Disk Manager

Have you tried this on another PC - is it recognised?
Have you tried manually assigning a drive letter in disk management? This article gives you step by step instructions on how to do this.

1 more replies
Relevance 58.63%

Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)

Answer:Disk 1 unknown not initialized - an external HDD

  
Quote: Originally Posted by empog


Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)




Hi empog,

Welcome to Seven forums.

It could be an either an issue with the harddrive itself or it is formatted in a partition which is not recognized by windows.

Once the harddrive is connected open command prompt and type diskpart and hit enter. Then type list disk and hit enter.

Whatever information is displayed kindly post a screenshot for the same.

Screenshots and Files - Upload and Post in Seven Forums

Keep us posted with the results so we can advise you further.

9 more replies
Relevance 58.63%

Please help me to get my important data from my bad hard disk,

I have a segate 500 GB usb external HDD, It was working fine since last 3 years. yesterday i connect this to a XP machine, and start coping some data. the coping speed was very slow, so I restarted the machine in between. After that I LOST MY hdd, it never be back. I tried a lot.. no success till now.
Please help me get my data back:

Answer:How do i fix unknown, not initialized and unallocated external hd?

Sorry to be the bearer of bad news ... but I had almost exactly the same thing happen to me on a Seagate 2TB hard drive. Working for months, even passing surface checks with no errors and then, one day -- "bad disk".

I've tried every data recovery app I could find against it (4 of them) and none of them find anything.

I've had drives fail me over the years and have never run into this situation where the drive powers up but NOTHING can be recovered from it.

So, I've resorted to sending it off to a local data recovery outfit

9 more replies
Relevance 58.63%

I have this WD 1TB external drive that stopped working a while ago. I am trying to initialize it in order to perhaps try to recover data from it using a Data Recovery Wizard.

When connecting the drive via USB, it only sometimes shows up in 'Devices and Printers' as connected through USB (ie, it allows me to click 'Eject My Book' in the task bar). When it shows up there, I can also see it in Disk Management as 'Disk 2, Unknown, 931.51 GB, Not Initialized' with a little red downward facing arrow icon.

When I right click the icon (with the red arrow) and choose Initialize, it hangs a bit and then shows an error saying "The request could not be performed because of an I/O device error"

When I run 'USB device viewer' (UVCView) this is what shows up next to that device :






Quote:
---===>Device Information<===---
English product name: "My Book"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: High
Device Address: 0x02
Open Pipes: 3

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00

==... Read more

More replies
Relevance 58.63%

Please help me fix this problem. any information you need just ask me i will tell you all you need.

Thanks in advance

Answer:How do i fix unknown, not initialized and unallocated external hd?

Right click on it and choose Create Parittion. Choose the type of partition. Then format it. I recommend doing the slow format. It may take an hour or so, but I think you're better off in the long run.

9 more replies
Relevance 58.63%

Hi I have a wd 2tb external hard drive problem (i think its dead) Yesterday my hdd was working fine i powered down went to bed this morning I couldn't find my drive in my computer.
i opened up computer management and selected disk managment. at the top it shows my c drive and system reserved at the bottom it shows the c drive and drive 1 stating its not initialized.(see attached screen shot)
when i tryed to performe this task it gives me an error of the request could not be perfomed due to an I/O error.

i have checked all cables and replaced this hasnt helped.
i downloaded partition find and mount which shows my hdd but states it has 0kb (see attached screen shot).after scan no visable partitions no newpartitions.
i downloaded the wd hdd wizard and tryed to write 0 to the drive this failed.
I downloaded mini tool partition wizard that cant find the drive.(screen shot)
I took the hdd to a computer store he couldnt find it in disk management.
seatools for windows results cant find it
disk checkup ran results in screenshot cant run self test
HDD scan
all show 0KB no partitions so my question is is it dead???
 

Answer:WD External HDD 2TB not initialized I/O ERROR is it dead???

Hi, papaikolaou1980. Welcome to Major Geeks!

Unfortunately, none of the screenshots are showing here. But, if you've done everything listed in your post and the drive isn't showing properly, I'd say it "died" and if still under warranty, you should get a replacement. If it's a "green" series rather than "blue" or "black", I'd avoid getting another one as there have been many dependability issues with WD's "green" series.
 

1 more replies
Relevance 58.22%

Hey guys!

My Zune 80gb stopped working a while back. It wouldn't charge. So I thought I would take out the hard drive and use it as an external 80gb hard drive. So I bought an 1.8" ZIF encolsure for it and installed the hard drive into it.

All appears good with the installation. When I plug the hard drive into the PC the light on the hard drive enclosure comes on and stays on & the disk starts spinning. Then Windows Vista does the whole "Install new Hardware" thing and calls it a "Disk Drive" and a "USB Mass Storage Device" and says hardware is installed and ready for use.

But the problem is I can't seem to access the drive. I can't find it anywhere. It doesn't show up as a drive I can use or anything. I tried a third party partitioning prgram to try and find the disk so I could reformat it but it wouldn't it couldn't find it either. I even plugged the drive into my Mac thinking that Disk Utility might be able to recognize it and let me wipe it, but the Mac doesn't recognize it as anything.

Back in Vista, Using Device Manager, Vista notices the drive under the "Disk Drives" option as a "Disk Drive" and that it is elecronically signed by Microsoft (since it has the Zune firmware on it) but I can't do anything with it ... And this is the only place where I can see that the drive even exists. I can't reformat it or anything.

Can anyone help me? I thought I read somewhere... Read more

Answer:Putting a Zune 80gb Hard Drive in an External Hard Drive Enclosure, help please!

anyone?
 

3 more replies
Relevance 58.22%

I see it can be done from an installed to an external, but can it be done in reverse, taking the external cased hard drive and cloning it to an internal? The old hard drive is from an xp laptop, and I can aquire another xp laptop if I can clone this way. Perhaps if I set the enclosure hard drive as master? All ideas are greatly appreciated. Many thanks
 

Answer:Clone a laptop hard drive from an external case to an internal hard drive

6 more replies
Relevance 58.22%

Hello,
I am trying to move all my files from my computer to my new external hard drive, but whenever I try and move a file over 4 GB in size i get this error message...
"The file is too large for the destination file system"... anyone know how I can get around this so I can move those files over?
 

Answer:Problem transfering large file from hard drive to external hard drive

Get ahold of some software that will break up the file into chunks.
 

1 more replies
Relevance 58.22%

I have a 1TB external my passport USB hard disk.It was working fine till last week but when i plugged it in today windows 7 didn't recognize it.I can see the hard disk in Disk management as "Disk1 Unknown Not initialized" but can't see it under my computer.Also the hard disk light is blinking continuously .When i plug it in USB port it tries to read data and the there is a clicking sound.It clicks few times and then it goes completely silent.
I have tried using various partition tools like MiniPartation and TestDisc etc but they don't even recognize the hard disk

Any help is much appreciated. My priority is recovering data I can buy a new hdd if i can recover data.
Please let me know if u need more info.I am posting a screenshot of disk manager for reference.

Thanks!!!!

Answer:Disk1 Unknown Not Initialized error for external HDD

My Passport is Western Digital. Isn't it?

I am not placing much hopes on your drive. It doesn't even show the capacity.

Anyway let us check your drive with Datalifeguard Diagnostics for DOS.

Please see this post and execute. Please help,disk 1 unknown not initialized (western digital external)

9 more replies
Relevance 58.22%

I've got 600GB HD (Rock mobile disk) that goes without saying need to be recuperated. It was working fine earlier this summer when I last accessed it. A few weeks ago, I plugged it in again and it gave me an I/O Device Error, read and unspecified error.

I have been researching a solution non stop and today when i plugged it in once again something worst happened, this time I see a External HD not Detected: Disk 1, Unknown, Not Initialized in Disk Management.

Can someone please help?

The irony... we get an external drive to protect our data and not loose it and then this happens

Answer:External HD not Detected: Disk 1, Unknown, Not Initialized

Try this to salvage what you can from it: Download MiniTool Power Data Recovery Free Edition - MajorGeeks
Do that before any attempts to repair.
If nothing, portable drives are even less reliable than stationary ones and it's interfaces are prone to malfunction.

15 more replies
Relevance 58.22%

My external HDD has crashed after unplugging it accidentally while using it. I believe the directory structure has been corrupted. The external HDD shows Unknown, no size, and Not Initialized on the Disk Management screen:

I have tried using MiniTool Partition Wizard as described in this thread.

I'm not sure where to go now to try to recover the data on this HDD.

Thanks for your help in advance.

Answer:External HDD shows Unknown, no size, Not Initialized

Try the Data Recovery tool of Partition Wizard.

4 more replies
Relevance 57.4%

It was working fine the other day, then out of nowhere it just stopped working on my mac, i plugged it into my windows laptop to get a better idea of what is going on, and it says (not initialized, unallocated)

On minitool it says bad disk, and logical type, can anyone explain how to fix this ? I know you have probably gotten this before and gotten bored, but please help me, i mainly just want the files and am prepared to throw this stupid hardrive away

More replies
Relevance 57.4%

Hello
I got my 1tB WD external disk and it's not working as it used to. The problem came from nowhere, suddenly, totally unexpected. There is/was my precious data on it which I collected for 10+ years and I'd like not to lose it.

Origin:
It was working fine a day ago, no problems occured. Hasn't been unplugged since then. Has never fallen. Has never had any kind of error. But: I've seen some kind of ".COM not responding" problem on my PC (don't remember, closed it immediately). I believe my laptop is in a good and healthy condition.

So, what my WD HDD does is:
- it can be seen as a device by my computer. I can plug it out safely.
- diode shows that it's working (not showing the data transfer activity)
- nothing else

What I see in Device Management/Storage is (as in the title):
Screenshot by Lightshot

What programs I used to try to restore partition:
- Mini tool Partition Recovery Home Edition (quick and deep scan, no results. Shows disk as a Bad Disk)
http://prntscr.com/2wpy8s
- Mini tool Power Data Recovery (pro, non-free tool, however after scan there was no results)
- Find and Mount (no results)
- TestDisk (quick and deep scan, no results)

What I haven't tried doing is connecting the HDD directly to the laptop.

Any suggestions?

Answer:External HDD shows as Unknown, Not initialized, Unallocated. Restore?

You should try directly conmcting it. If that does not work, try this: Recover a flash drive turned RAW ? Partition Wizard and TestDisk. Do recovery with partition wizard. (Don't mind the name) But if that does not work, your drive is dead. Like a wise man said, backup, backup, backup!

4 more replies
Relevance 57.4%

1. Disk management showing disk 1 -unknown- -not initialized-

2. When i tried to initialized it show -incorrect function-

3. I tried the recovery software but all of them cant detect my external HDD

4. The Data Lifeguard Diagnostic from western digital managed to detect my external and showing there is bad sector but when i tried to repair, it give me this message -unable to repair bad sector-

Please help!!! is there any chance i can fix this?

Answer:Please help,disk 1 unknown not initialized (western digital external)

I guess there is mechanical problem with the hard drive. you can try checking and repairing bad sectors (http://www.articlesbase.com/hardware...s-6907958.html), or just send it to some drive repair center.
but, if there is important files on the drive, you'll have to recover data before repairing it.

2 more replies
Relevance 57.4%

Hi, recently my lenovo T61's video card fizzled out right after the warranty expired. I have information on the laptop's hard drive that i need to get off of it. I have a hard drive enclosure for my old hp laptop's hard drive but the two drive have different connectors. I was hoping someone could point me in the right direction to find a lenovo T61 hard drive compatible external hard drive enclosure. The hard drive is a 100 GB 7200 RPM driveModel: HTS722010K9SA00HDD: 7K200-100LENOVO P/N: 42T1056HITACHI P/N: 0A53257MLC: DA2141

Answer:Need help finding correct external hard drive enclosure for a T61 hard drive

There is a lot to choose from. Any USB SATA external hard drive enclosure should work. Since i don't live in the US i don't know where the best place to buy such a enclosure would be in your case. If you cannot find any maybe someone else that live in the US could help you out.
 
-gan

5 more replies
Relevance 57.4%

I need an external hard drive for taking regular backups of all of my data.
When i searched the internet I got two options:
1. Porable HDD [high cost, slower speed but don't need external power]
2. Desktop HDD [low cost, higher speed but need external power]

I want to know that...
1. Which hard disk's live longer? Porable or Desktop.
2. I heared that pulling off USB cable of Portable HDD may cause data lose because it also supplies power to hdd.
What will happpen if Power goes off from Desktop HDD? Will my data/Hard disk remain protected?
3. Level of safety of data on moving or shaking on both Desktop and Portable HDD.
4. Can we install os and boot from portable and desktop external hdd?
 

Answer:Need Advice : External Desktop Hard drive vs Portable Hard drive?

Unless you really need to go portable with a Laptop .. I'd not use a USB powered External.
You cannot boot from a USB External .. But there's another option if you're capable of physically changing HDDs ..

Get a good external Enclosure (with a fan for cooling) .. Install a good HDD ... with a 5 year warranty
and make the HDD in the enclosure a bootable backup .. where you could swap HDDs if/when needed ..
 

1 more replies
Relevance 57.4%

I bought a esata-sata cable and tried to connect a esata external hard drive througn a sata 2nd hard drive caddy. The result is that my T42 can not detect the external hard drive. The caddy, cable, and the external hard drive are all functional with other setups. As I know, the signal of esata and sata are the same. It should be just passing through. I don't understand why it fails. I observed that both the leds on the caddy and above the caddy are lighting when I boots T42. However, both leds dims after that. Any suggestion?PS. I know using a pcmcia will be easier. However, several reviews confirmed that the writing speed is limited to 30 MB/s through pcmcia. The writing speed on the caddy is at least 55 MB/s when I tested it with a 2.5 in hard drive.

More replies
Relevance 57.4%

I recently formatted my c drive and now i am reinstalling all the software. I keep all the setups of software in my external hard drive. For installing the software I coy the setup folder of the required software on my laptop, then install it.

Is straightaway installing the software by accessing the external hard drive okay? Does it make any difference in the installation time or any reduction in life of hard disk performance.

Or should I always install through my laptop hard drive?

I am running windows 8.1 pro

Answer:installation software from external hard drive or internal hard drive

Your method is as good as any. If it works, keep doing it.

1 more replies
Relevance 57.4%

my macbook pro is currently our of commission due to a mishap with a cup of water. the person i spoke to on the phone at the apple store said to have the hard drive transferred to an external one in case they need to reformat it. is this even possible if my laptop won't turn on?

Answer:transfer data from laptop hard drive to external hard drive

Depends on the type of water damage has been done.
If your laptop has been a small puddle of water for a little bit of time, yes it will mess up your hdd's connectors and possibly damage it.
If the water spill was like a splash on the keyboard and quickly cleaned up, you have a good chance of the hdd working.
Just depends on what got damaged badly enough for something not to turn on for quite awhile.

Also get rid of that macbooks battery, I have a bad feeling it might not work with your macbook anymore.

3 more replies
Relevance 56.99%

Looking to buy an external hard drive for backup. This will be used only to backup data periodically. This is certainly a good price ($140):

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1474205

I've never heard of it. Anyone have any experience with that brand?
 

Answer:Opinions on BeyondMicro External Hard Drive?-or recommendations on External Case?

10 more replies
Relevance 56.99%

So I want to clone one external 2TB with another. So one drive is the main use one and another the backup one. So I copy everything over to backup and i store the backup at another house and then I start using the main: deleting and adding/editing files. What is the best software or whatever to allow me, after some time, synchronize/clone the externals again without deleting all on the backup drive and recopying? (main to backup) and make them clones again? ..Adding and deleting or replacing any nonidentical files.. Like where i can press a button on some software and it do the work for me.
Sorry if this is confusing

Answer:Best external to external hard drive synchronized backup plan?

There's a bunch of applications that can do that.

They all work pretty much the same way, but would differ in how easy they are to understand and configure---the interfaces would differ and the help files would differ.

I use FreeFileSync from sourceforge.net.

Others are Syncback, Folder Clone, Karen's Replicator, FBackup, Second Copy, and Synchromagic.

You should be able to configure them to do one or the other of the following:

1: If you delete or modify a file on the "original", it will also be deleted or modified on the backup.

2: If you delete a file on the "original", it will be retained on the backup. If you modify a file, both the modified and unmodified file will be retained on the backup.

It's up to you which choice you prefer. I use the first method, which is often called "mirroring"--one drive is an exact match of the other.

7 more replies
Relevance 56.17%

Hi,
I would like to know that If i got an external monitor with usb ports on it and then connect my Macbook Pro 2015 to it via an HDMI cable, can i connect an external hard-drive onto the external display to transfer files to my macbook?
 

More replies
Relevance 56.17%

Am thinking of adding one of these to get more space. I read/heard somewhere that the software that comes with it allows you to back-up files on this drive automatically from the computer C Drive. Can anyone confirm this please as this could be the 'buy it' information I need for the final decision.Thanks in anticipation

Answer:Archos external Qdisk External Hard Drive

It doesn't mention anything about this on the Archos website click here

2 more replies
Relevance 56.17%

I am looking to purchase an external hdd & dvd writer for my laptop, I have looked at ones made by freecom-does anyone know if they are any good and the best place to buy them ?Thanks

Answer:External Hard disc Drive & External DVD writer

click here?d

2 more replies
Relevance 56.17%

I used a DriveWire - Universal Hard Drive Adapter (IDE / PATA / SATA to USB HDD Adapter) to hook up A 3.5" Hard Drive (Samsung model HD502HJ) to my desktop in an attempt to get my wife's files off her old desktop machine and merge them into mine. It all started off fine, the drive was recognized and I could see the files when I plugged in the USB cord. I started a NOD32 scan of the drive and a few minutes later a spark flew off my power strip and the fuse blew - looks like a letter opener shorted between two of the plugs. I think I killed the hard drive.

I replaced the power strip and started everything back up. The drive spins, but no longer is recognized by the computer when plugged in (no drive letter for it). Under Disk Management, I see the disk listed as "unknown" and "not initialized". Originally I had the option to right click and select "Initialize", and I was given option to use two partitiion styles (MBR or GPT).. I tried both to no avail, and get the "device is not ready" message.

I can right click select "Offline", and get the same message. right-click "Properties" say the device is working properly.

I plugged in another drive on the hard drive adapter and it works (so it's not the vault of the adapter). I try the same setup on my laptop and get the same results.

So I'm pretty sure I killed the drive. I just care about getting pictures and documents off it. Any advise? I know t... Read more

Answer:Hard Drive "Not Initialized", "device is not ready",won't recognize

If you have killed the drive, there isn't very much you do about it. Even experts cannot sometimes recover anything, and it's just a wast of money.

9 more replies
Relevance 55.76%

I have an internal hard disk not in use ,and I would like to make it as external disk !
I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .
So is there another way ? like usb -esata cable ?

Answer:how to make your internal hard drive into and external hard drive ?

Firstly, where are you based (Which country)? I would get the part of the internet, I trust we are talking about a 3.5" drive? Do you have an esata port on your pc? I would get something similar to this, I think: Play.com - Buy CiT 35M17SEF 3.5 inch SATA / USB / Firewire / eSATA External Hard Drive Enclosure online at Play.com and read reviews. Free delivery to UK and Europe!

3 more replies
Relevance 55.76%

I am trying to move my files from the hard drive I removed from my old computer to the external hard drive. I want to be able to view the files before moving. Thanks
 

More replies
Relevance 55.76%

I had been using my Hitachi 320g external HD for 2yrs.It had not problem until yesterday I transfering some files from my Drive C to Hitachi HD when the computer hang.I unpluged the external HD and restart PC.When I pluged in the external HD again it was recognised as interrnal HD.I've problem accessing the files.The PC detected it was FAT32 since my system was NTFS and asked me to reformat my external HD.I tried connect to other PC but no different.
 

More replies
Relevance 55.76%

I am unsure about what happens after you convert your internal hard drive to an external hard drive... Let's say the internal HDD was your only laptop HDD and you replaced it with a SSD. If you convert your old internal HDD to an external HDD, what would happen when you open it up on your newly installed OS (on the SSD)?

I am trying to download a new OS but us my old internal HDD as an external drive just to access specific files. However, I don't want any other data/programs/settings/etc. downloaded onto my new SSD. Do I need to delete my old OS when I convert my old internal HDD into an external HDD or does the OS simply get "reduced" to a bunch of files that I will see on my newly installed OS?

If anyone is able to clarify these questions that would be fantastic!
 

Answer:What happens after you convert your internal hard drive to an external hard drive?

does the OS simply get "reduced" to a bunch of files that I will see on my newly installed OS?Click to expand...

Yes
it will just be seen as a data drive and you would need to goto the directory for your data
it wont run as an OS at all
 

3 more replies
Relevance 55.76%

I currently am running windows 8.1 x64 bit, and I am thinking of copying my entire hard drive (consisting of C & D drives using a total of 929.2 GB of space.  And wanting to get a Western Digital External Hard Drive with 1.5 TB of space.  I have been led to believe that windows 8.1 has a utility called System Image Back Up Utility (located in the Control Panel).  I have also been led to believe that this can be done completely using a bit by bit copy of the entire hard drive (programs, files, drivers, apps, utilities, etc),  But I can not fine enough info on doing this. And there are still questions, such as How do you transfer the copy from the external hard drive back onto the PC if it should completely crash? (I do have a five disk recovery set I made when I purchased my PC, but still want an additional source of a back up system.)  I can not find the procedures for copying the copy from the external hard drive to the crashed PC, and are ther better and safer programs out there to use instead of the windows system Image back up utility?  I would add that I am somewhat of an intermediate user, useing PCs since windows 95. but there are obviously issues that I need to research before attempting something this complicated and advanced.  Any help would be greatly appreciated.  Thanks in Advance !










Solved!
View Solution.

Answer:Copying Complete Hard Drive to an external hard drive as a b...

A description of System Image Backup can be found here.  If you want both C and D, I would suggest a clone program. Both Seagate and WD offer a free Disk Wizard Program. With the cloning process, you use an external case to perform the clone.  When disaster strikes, you swap out the drives, and continue. Personally, I make clones of my primary desktops every 30-45 days.

5 more replies
Relevance 55.76%

I have an HP dv6810us. its 7200 rpm and only has 160 gigabytes of space. I just bought a Western Digital My Book Essential 2TB external hard drive, at 7200 rpm; model: WDBAAF0020HBK-NESN. I have put ALL my movies, documents, music, pictures, and everything other than my programs and stuff that came with my computer. I only have 20 gigabytes left on my computer i was wondering how i could somehow turn my external hard drive into my internal hard drive....and how. any websites of videos that could lead me to the right place would be very helpful. i have used 140 gigs of space on my computer mostly due to the sims 3 and programs. please help!

Answer:Making an external hard drive your internal hard drive

Hang on, so if I understand you correctly you've got a 160Gb drive installed in your laptop and it's only got 20Gb free space left. So now you want to put the 2TB drive into the laptop? Sorry, but that won't work. You'll need to buy another 2.5" drive.Is the drive inside your laptop SATA or IDE?

3 more replies
Relevance 55.76%

Windows 7 desk top computer stopped during use. It would not restart when button pressed. External power supply ok. Possible internal Power Supply Unit failure. Can the pc hard drive data be backed up to an external USB hard drive enclosure before testing to find the fault in these circumstances?

Answer:Hard drive backup to external USB hard drive enclosure

Yes, most HDD is use on laptop and desktops units are pretty standard. The desktops use 3.5 inch internal drives and the laptops are mostlt 2.5 inch. The Sata interface is almost universal. Suitable enclosures are sold by major vendors. Be aware that the very lost cost kits are not real enclosure, just the power and interface components. Not recommended. To easy make a mistake.You will need a working PC or laptop to read the data. And enough free drive space to store your data files. Recovering program files is not piratical, unless the programs were  portable programs. Which is not likely.This video is basic and helpful. (Ignore the lead in advertisement.)http://www.youtube.com/watch?v=SLLQusrmzvIAs you will see in then video, you can buy an enclosure for  any starred hard drive. So just pick out a good enclosure and you can get you data back!EDIT: On of the best tutorials I have seen lately.  He makes it plain and simple and very useful information.  Geek-9pm recommends you watch. That guy is even better that me.

2 more replies
Relevance 55.76%

Hi guys,

I'm new on any sort of forums so go easy if it's a stupid question..but here goes.

Me and my brother built me a new computer from scratch (he did the building - i did the watching).

To cut a long story short - I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.

When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.

Does anyone know how I can get the internal drive to stop acting like an external drive?

Any help would be greatly appreciated.

Answer:Internal Hard Drive acting like an External Hard Drive

This is the way it works. I have an 80GB SSD and an internal HDD and the same happens if the file/folder is large enough. If you just copy a few MBs, you will not see the window with the green stripe running. But if e.g. you copy 500MBs, you will see it. It physically moves the data. That is different if you copy on the same volume from one folder to another. Then it only makes an entry in the MFT.

6 more replies
Relevance 55.76%

Hi, for nearly a year now I've been using a Buffalo 500GB external hard drive.
Just yesterday though, after unplugging it from my PC, using it on another Windows 7 machine and then attempting to reconnect it the my PC, it began to show up on My Computer as a Local Disk rather than an external. In addition, when I try to access it, it gives me this message: E:\ is not accessible. The file or directory is corrupted and unreadable. My question is, is there any way to return the drive to it's original state or recover the data inside? The data is of extreme importance.
Thanks for any help.
 

More replies
Relevance 55.76%

I earlier posted about the Aspire AST690-UP925A having 250GB hard drive. I since then contacted Aspire chat support. Apparently, not being tech savy we didn't realize 250 gb hard drive only 112 c drive is able to be used, the d data drive holds the programs to run the computer.

I didn't mean can I use the external hard drive internally. I meant, if I hook it up externally would it work in place of the internal hard drive that is nearly full except for around 10 GB?

So, unfortunately the computer isn't as big as you believe. But...I wanted to know if I purchase (I was looking at western digital elements 2TB external hard drive). Can we use it for this computer. It will not run itunes or anything like that, but we can obviously go online.

My brother wants to buy a new computer, but I know that is probably not the way to go. Should we get an internal hard drive installed and other memory or something or can we use the external hard drive?

I would appreciate any informed help on this since we do not no technical info on computers. Can't really afford to buy another computer right now.

Thanks in advance
 

Answer:Can external hard drive be used for full internal hard drive?

If you want to take out the drive from external hard drive case and install it in your desktop/laptop, then usually you can. Usually external hard drives are just ordinary hard drives accompanied by some extra controller to make it able to "talk" via general ports (e.g. USB). However I am not familiar with digital elements 2TB , so I can not confirm it. But I do have WD external drive, which I had positively confirm that its real drive is just ordinary hard drive.

Note that if you decide to do this, I suggest to find experience people to work on extracting the drive. If you do it yourself you will risk to damage it, and you don't want that since usually opening the closure means voiding the warranty.
 

2 more replies
Relevance 55.76%

How can I use an external hard drive to boot windows?My newer computer has a now-defunct hard drive.I want to use the files on this computer and use it on my newer one,which has the better memory and better processor.Now I'm not sure if copying files from another computer to an external hard drive to make it work with another computer will make some hardware conflict.

Answer:External Hard Drive as Main Hard Drive?(Changed)

I don't know about older versions of Windows but XP and newer doesn't like being booted from external hard drives will not at all without some serious customization. Since you haven't told us what version of windows you plan on using it is hard to guide you further except to say that the general advice is to not attempt it.

5 more replies
Relevance 55.35%

I'm not sure if I should have put this in "Hardware" or not so...
I am, by far, a professional at this so hang in there with me if I confuse you. A few months ago my children broke the screen on my laptop and for a few weeks I was trying to use the External Monitor so it would show up on a monitor my sister gave me. Well I finally got that up and working however, now when I connect my external hard drive to the laptop, it will not show up on the desktop monitor. (The external hard drive is Western Digital).

This external monitor is a new thing for me, actually I knew you could do it but didn't try it as an option until my nephew - who is much younger than me - thought of it lol. Anyway, I have pictures and such on my external hard drive that were put onto the external by the very laptop I am using. I'm not totally sure of the montior I am using, all I can tell you at the moment is it's a Dell. The laptop is a Toshiba Satellite A135 S266; the laptop has Vista Home Basic (32 bit) and I believe the desktop monitor is running with Vista too but I'm not sure if that's important since it is only serving as a "view." Anyway, I would love some help with why the drive may not be working with this set up.

Thanks,
Kerri
 

Answer:Help with External Monitor and External Hard Drive

This may seem like a silly question, have you tried the HD on another PC to see if the issue is with that?
Also, are you saying it's not showing up in 'My Computer', or are you not getting the option to open files?
 

1 more replies