Computer Support Forum

1TB WD external hard disk not initialized

Question: 1TB WD external hard disk not initialized

I have an WD 1TB hard disk which failed to initialize recently. It gives me an I/O error message. I found a few old threads here with similar problem and tried out the suggested steps. I ran WD diagnostic tool and passed the Quick test and Extended test(Screenshot attached). I would like to avoid the zero test and formatting of my data if possible. The hard disk is almost full and recovering them after formatting would be really painful. I would be really grateful if someone could please help me out?

Relevance 100%
Preferred Solution: 1TB WD external hard disk not initialized

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: 1TB WD external hard disk not initialized

Is you have a empty hard drive kicking about or somewhere to store you data, move it all to there.
Then format you drive, see if that works.

9 more replies
Relevance 93.89%

Hello,

I have run into a problem that has been causing me quite a bit of headache as of late. A week ago, my WD Elements External Hard Disk is not displaying under hard disk drives, but does display under Devices and Printers. This is what it shows under computer management:

I have tried to initialize the disk using MBR and GPT options but failed receiving I/O Disk Error.

Please help, thank you.

More replies
Relevance 93.07%

I am using windows 8 and I have read previous threads with similar issues that I face but my problem is unique. My 60GB external Hard disk was manufactured by FUJITSU and was taken out of a dell laptop. When I bought a case for it yesterday it was tested in a laptop computer to see if it was working before I paid for the case and it was working properly. However, the owner of the laptop removed the cable without safely ejecting the drive first. Later, I connected it to several computer and it would install and be detected in Device manager, Disk Management and even devices and printers but it does not show in My Computer nor does autoplay options pop up. In disk management it is shown as Disk 1 unknown not initialized as shown in the attached screenshot.

I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up

when I right click the Disk 1 the initialize option is gray and only offline, properties, and help are available. I used mini partition tool and this is what i get

I am at my wits end. Please assist. I do not need what is inside the hdd. I just want it to work.

Answer:External Hard disk not initialized, unknown.

"I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up"

Did you try initialising it as an MBR disk?

5 more replies
Relevance 93.07%

I see the external disk in Disk Management but it is not getting displayed in My Computer nor any data recovery software is detecting it :(
Image attached..
When I right click on disk 1 Initialize Disk option is also disabled.

Please help!
-Zia

Answer:Seagate external hard disk not getting initialized

What are the other options when you right click on the disk?

4 more replies
Relevance 91.84%

Guys please help me to fix my hard disk WD elements 1TB

I have tried so many ways to fix it.. but I got nothing in 4 days!!

I have tried from command prompt " chkdsk /f /r "
the first time I tried it works, but something error occured, and now I can't using that method..
when I tried to using that, just show " cann't open volume for direct access"

my hard disk didn't appear on my computer list, but I can reject it.

and anyway I have tried to using minitool partition wizard, but you all can see that my hdd didn't appear with the volume.. just show up disk 2 with 0.00 GB

Anyone can help me to solving this problem ?

btw, My english isn't good enough..but I hope all of you can understand what I mean

Thanks before.!

Answer:External hard drive disk unknown n not initialized!

Sorry to say your WD Elements is dead and you have tried everything.There is nothing left for me to do, honestly. I would have done the same thing before declaring it dead.. No DIY data recovery is possible. The only option open to you is to entrust it to Western Digital Data Recovery partners in your region. Check with them whether there is any hope of recovering data in good shape.Telephonic consultation is free.

https://support.wdc.com/Warranty/dat...y.aspx?lang=en

7 more replies
Relevance 91.02%

Hi,

I'm new to this forum.

My external hard disk (Seagate) is detected in the task bar after connecting, but not visible in "My Computer".

It is visible in Device manager under Disk Drives but not under USB.

There are few threads in this forum which are similar to mine, except that their Drives are visible in the Disk Management as Unallocated Space, mine is not.

SEE ATTACHMENTS !!!!!!!!!

I've tried all tools, tried in Windows XP still no solution.

Is there any way to atleast recover the data !!!!!!!!!

Your reply is appreciated !!!!!!!!

SEE ATTACHMENTS !!!!!!!!!

Answer:External Hard Disk, Unknown, Not Initialized ! No Unallocated Space.

Hi Pradeep,

Welcome onboard.

" I have tried all tools" - can you please enumerate what all tools?

Have you tried running the Seagate SeaTools for Windows to diagnose/repair.

If not check your external drive now.

5 more replies
Relevance 91.02%

Hello. Through the power of google, I have come here to see If I can get any help recovering data. Essentially found this thread: disk 1 is unknown, not initialized, unallocated and just having really similar issues.

Issue is with my sisters External Hard drive, a WD My Passport Elite 070B.
Asked her a few questions on how she was using the drive/any issues and she explained that she had to pull the usb plug while still reading/writing because it would hang/freeze (/facepalm)

Downloaded PW Minitool Recovery and EasyRecovery Pro Trial, but haven't really run any lengthy tests yet. Just tried them out for 10 mins to see if anything would show up. Going to leave the computer on tonight and do a full scan though.

Some other things I have tried:
-Tried connecting it to other PC's/Laptops(XP/Vista/Windows 7/OSX). Same thing.
-Tried different USB cables

Any suggestions or things I should try?

Answer:Unaccessible External Hard Drive: Disk 1 Unknown, Not Initialized

I'm facing the same problem too....
Un-detection of my ext BUFFALO MiniStation HD-PCTU3 3.0

9 more replies
Relevance 90.2%

This quick new hard disk. So sad I cant access it anymore? why this happen?

You can see from the photo MY computer cant even see this driver anymore, so I check on the
- Disk management it said unknown no driver letter too ,Not initialized.
-Click Initialized it said i/o device error

I have try uninstall the device and restart let it install again still the same.
Checking many thread have the same problem, I wonder anyone solve this kind of problem before?
--------------
Update the possible cause of it, I believe my external hard disk spoil because my laptop was low battery and suddenly off either it goes Hibernate or off there is no time to read or write in the hard disk.
Then I just unplug the external hard disk.

If you face this situation don't unplug it, turn on the computer back and do a proper remove or shut down everything.

Answer:1TWD external hard disk unknown,not initialized,unallocated,i/o error

Is this an external drive attached via a USB hub ??

9 more replies
Relevance 77.49%

Hi,
I have an WD Elements 1023 external hard drive which I want to connect to my laptop which runs a 64 bit Windows 7 Home Premium. When I connect the device, it shows up in the device manager and the driver is installed properly.
However, it doesnt show up as a drive and in the Disk Management, it shows as Disk1 unknown. When I try to Initialize the disk, I get a error that the "The Media is write protected".
Its been a real pain as I have a lot of data init and unable to access it.
It wud be great if anybody could suggest me a solution for this.
Screen shot of how the drive appears in the device manager
https://picasaweb.google.com/114564433723979804644/March3201202#5715608574510479554
Screen shot of how the drive appears in the disk manager
https://picasaweb.google.com/114564433723979804644/March32012#5715607129219976018
Regards
hechesspee

Answer:External HDD not getting initialized in Disk Manager

Have you tried this on another PC - is it recognised?
Have you tried manually assigning a drive letter in disk management? This article gives you step by step instructions on how to do this.

1 more replies
Relevance 77.49%

Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)

Answer:Disk 1 unknown not initialized - an external HDD

  
Quote: Originally Posted by empog


Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)




Hi empog,

Welcome to Seven forums.

It could be an either an issue with the harddrive itself or it is formatted in a partition which is not recognized by windows.

Once the harddrive is connected open command prompt and type diskpart and hit enter. Then type list disk and hit enter.

Whatever information is displayed kindly post a screenshot for the same.

Screenshots and Files - Upload and Post in Seven Forums

Keep us posted with the results so we can advise you further.

9 more replies
Relevance 77.49%

Hi, i'm new on this forum. I was searching for an answer to this issue in a lot of threads but i didn't find something to fix it.

I built an external hd using the hard disk of my old laptop (Fujitsu MHV2120AH PL) and a Woxter i-Case 240.

When i connected it via USB i went to the Disk Manager and saw the unit as "Disk 1 Unknown Not Initialized". But there was something else, the disk has a size of 120GB but the Disk Manager shows only 700MB.

The Disk Manager didn't allowed me to format this partition and when I press on "Initialize disk" it didn't do anything.

I used a Linux Live CD and I had the same issue, i tried to create a new partition table but it didn't create it and GParted didn't allow me to create a new partition answering that i need a partition table first.

I tried with Diskpart without any result too.

This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.

Do you have any idea?

Answer:Unknown - Not Initialized Disk (External HD)

Hello Matterito!

You could try a couple of things: changing the enclosure, as this one's controller may be corrupt, or hooking up the disk directly to the computer.
Also, see if your USB drivers need updating.








  
Quote: Originally Posted by Matterito


This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.


Following this, it may be that your disk is just damaged. It could be just that the partition table is corrupted, so may be writing full zeros to the disk and repartitioning and reformatting it would help fix the issue. That is in the case that you don't need the information on the drive.

CK_WD

3 more replies
Relevance 77.49%

Hi,

I've been recovering data from three older internal hard drives for a friend, by way of an external HDD enclosure connected via USB to my laptop. It went well for the first two HDDs but the third, well ....

It's a Maxtor DiamondMax 10 HDD, 120 GB and is also marked SATA150.

(1) On most occasions, the HDD in question does not appear under My Computer. Under Devices and Printers, I see the external HDD enclosure as "USB to ATA/ATAPI bridge" (but not the HDD). In Disk Management, I see my internal drives and CD/DVD ROM but for the HDD in question, only "Disk 2, Unknown, Not Initialised" - I get the option to initialise it as MBR or GPT (I cancel at that point).

(2) On rare and seemingly random occasions, my laptop does pick up the HDD as drive F: but usually asks me if I want to format it (nope!). At this point it also appears under Devices and Printers, My Computer and in Disk Management as 'RAW' and 'healthy'.

(3) On three occasions, I have seen the drive name; on two occasions, all of the files - and on one occasion, I was able to copy four files across to my laptop (before losing visibility of it). So I know all the files are there.

However the HDD disconnects itself (or is disconnected) quite quickly, such that I am back to position (1) for the vast majority of the time.

I have tried TestDisk and EaseUS Data Recovery Wizard, which do not see the HDD. I have also tried MiniTool Partition Wizard, which mostly does not see the HDD but on one occa... Read more

More replies
Relevance 76.67%

This drive was originally a Maxtor back-up drive that my brother in law could never get to accomplish a successful back-up routine when running on his XP desktop system or his new Vista laptop. He gave it to me and I installed upgraded software and tried it on my Vista x64 system and again recieved "back-up failed" error messages. I decided to delete all contents on the drive and use it as a basic external storage drive. My problem is now my system see's it as "Drive not yet initialized". How do I initialize this drive?It's a Maxtor One Touch III, 200 Gb. 

Answer:Disk not initialized when trying to format external USB drive

Do it thru Disk Management...right click My Computer...select Manage...then Disk Management.

1 more replies
Relevance 76.67%

I've got 600GB HD (Rock mobile disk) that goes without saying need to be recuperated. It was working fine earlier this summer when I last accessed it. A few weeks ago, I plugged it in again and it gave me an I/O Device Error, read and unspecified error.

I have been researching a solution non stop and today when i plugged it in once again something worst happened, this time I see a External HD not Detected: Disk 1, Unknown, Not Initialized in Disk Management.

Can someone please help?

The irony... we get an external drive to protect our data and not loose it and then this happens

Answer:External HD not Detected: Disk 1, Unknown, Not Initialized

Try this to salvage what you can from it: Download MiniTool Power Data Recovery Free Edition - MajorGeeks
Do that before any attempts to repair.
If nothing, portable drives are even less reliable than stationary ones and it's interfaces are prone to malfunction.

15 more replies
Relevance 75.85%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

Answer:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Relevance 75.85%

1. Disk management showing disk 1 -unknown- -not initialized-

2. When i tried to initialized it show -incorrect function-

3. I tried the recovery software but all of them cant detect my external HDD

4. The Data Lifeguard Diagnostic from western digital managed to detect my external and showing there is bad sector but when i tried to repair, it give me this message -unable to repair bad sector-

Please help!!! is there any chance i can fix this?

Answer:Please help,disk 1 unknown not initialized (western digital external)

I guess there is mechanical problem with the hard drive. you can try checking and repairing bad sectors (http://www.articlesbase.com/hardware...s-6907958.html), or just send it to some drive repair center.
but, if there is important files on the drive, you'll have to recover data before repairing it.

2 more replies
Relevance 75.44%

Hi, thanks for trying to help me with this.

I recently moved and had my external hard drive disconnected and in storage for several months. It is a Western Digital model# WD500H1U-00. It has a separate power supply. There is a blue light on the front that is illuminated all the time, except when I connect the HD, then it will flash. When I got unpacked I hooked it up to my desk top and the computer would not access it. I then tried to install it on my laptop with no success. Since then I purchased a USB cord, with no luck.

This hard drive has a LOT of irreplaceable information on it. Formatting it is not an option.

Kevin at SpywareHammer.com was helping me with some other stuff and suggested I:

Regarding the ext HD, try this please:

1) Control panel===>administrative tools===>computer management===>Disk management

2) You'll Should see a list of Disks, Is Disk 1 listed with no partition letter assigned? if so continue

3) Right mouse click into the disk field, select Change drive letter and paths ===> choose a letter from the drop down, select OK. the HD should now be available.

No luck here either. When I right click on the disk field nothing happens. When I right click on the title block(?) I get: Initialize Disk (faded), Offline, Properties and, Help.
... Read more

Answer:WD external hard drive not initialized.

I also downloaded "MiniTool Partition Wizard Home Edition". That program did not recognize the HD.

9 more replies
Relevance 75.44%

Hi,

My problem is as follows:
External Hard Drive (1Tb WD Elements) that I've been using for a few months now has data on that I would very much like to keep.
It was working fine until yesterday in which I tried opening a VS project which became unresponsive, tried closing everything down and turning off computer which just froze the computer leading to a hard reset (button held for 5 seconds)

Since then the External Hard Drive has not been shown in Windows Explorer and in Disk Management is shown as "Unkown" and "Not Initialized"


The Drive will still be seen correctly in Device Manager and if uninstalled it will say it has correctly installed and is ready to use.


Attempts to recover data or Initialize the drive have not worked and I have followed and looked up multiple ways to recover and other similar cases. I'm fairly certain for the data recovery the drive needs to be initialized (which just throws me an I/O error upon attempting the process) as looking at the Volume section in the properties of the device the size of the drive is listed as 0Mb.


My Last resort is taking it to a data recovery shop and hope they can grab the stuff on there.

Any help is muchly appreciated thanks.

Answer:External Hard Drive Not Initialized

I'm not up on WD Elements. Did that HD come with a form of Smartware, and in that Smartware, was there a utility that would come up and either ask you to type in the user-assigned password or it would automatically type in the saved password and pass same onto The System -- and unlock the WD Elements? I ask because I'm a little familiar with WD Passport, not WD Elements.

2 more replies
Relevance 75.44%

Hi all,

I'm having an issue where my external hard drive (WD Passport Ultra 2TB) is not displaying in my computer and is not initialized in Disk Management. This occurred after my computer crashed while I was pulling out data from the external hard drive. Now when I plug in the external hard drive, it has a clicking sound for a few seconds then stops with a blinking light.

I have tried using the MiniTool Partition Wizard and it does not detect it. When I open up Disk Management, it says that I need to initialize the disk before I can access it. I read somewhere that I will lose my files if I initialize this, so I have not done so. The Disk Management also does not show any unallocated space in it. Please see attached image.

Currently I just want to take out all the data from this hard drive before I let this drive go if I can't save it. Is there any hope for me to save my files?

Best regards,
Jeefster

More replies
Relevance 74.62%

Hello,
first of all I would just like to point out that I am not a native speaker so I apologize in advance for the mistakes I might make.
I have a problem with my external hard drive. The drive is Verbatim 47512. Last year I unplugged the drive without safely removing it first. When I plugged it in again it asked me to format the drive. As I didn't wanna loose my files I tried using Recuva and it worked. However, the process took too long and I was leaving for ten months the next day so I had to stop the process. I wanted to continue when I got back but the drive wasn't working at all. I couldn't even turn it on. I kept trying and after some time it started to work again. When I plug it in, I can't find it in my computer. But I can find it in the disk management. I'm attaching a picture, it says it's uninitialized and that it needs to be initialized. I don't know what it means and I'm scared it might delete my files. It also says that it's allocated and unknown. https://postimg.org/image/zci27fe6h/
I downloaded MiniTool Partition Wizard and it says that my disk is bad. I don't know how to proceed, can you please help me? Or should I give up?
https://s3.postimg.io/mkjzqz85f/Bez_n_zvu.jpg

Answer:External hard drive- not initialized, allocated

Welcome to the forum if it's blank it's lost the partition you need specific partition recovery software you don't want normal recovery once the partition is recovered file should be there if you Google free partition recovery there is lots of good free ones

1 more replies
Relevance 74.62%

I have a external hard drive that's not initialized, but it recognizes with a messages pops up saying my drive is ready for use, but it doesn't show up under My Computer. I have a Windows 7 desktop PC that is a Home Premium 32-bit Anytime Upgrade. I'm thinking it's not fried, and I'm thinking that way because I received the message it found new hardware and ready to use? Or is it dead?

Also, I don't have a spare enclosure, and tools to open it up, so taking it out of the enclosure would be out of the question.

Thank you for any help!
 

Answer:Solved: External hard drive not initialized?

10 more replies
Relevance 74.62%

hello there ,
i have a Toshiba hard drive 500 GB it was working fine but suddenly when i plugged into my laptop i discovered it is not working and when i go to disk management it said Disk 2 unknown and not initialized.
i tried to plug it in another computers but nothing changed.
i have many thing in that drive i need them so could you please help me ?
 

Answer:my external hard drive is unknown and not initialized

I assume you have tried another usb cable; that is the very first thing to do.
If you have already done the above, then the next thing I would do would be to pull the drive out of the enclosure and connect it as an internal drive. Note you must have a working desktop to accomplish this task. If that does not work, you can send the drive to a data recovery shop. This last step is NOT cheap so get an estimate. A simple recovery using software can run $250 or so plus the cost of whatever media you want the data copied to AND it goes way up from there.
i have many thing in that drive i need them so could you please help me ?Click to expand...

Data you do not backup is data you do not care about AND you should expect to lose said data. All drives fail; it is only a question of when your drive will fail.
 

2 more replies
Relevance 73.8%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

Answer:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Relevance 73.8%

Hi Jumanji,

My external HDD (WD) is not getting recognized in my laptop from last few weeks. I have followed different threads but didn't get any working solution.

I have tried below options:

1. Disk management : Initially showing MBR/GPT options but none worked. After that its showing my external HDD as 'Disk1 unknwon not initialized'.

2. MiniTools Partition Wizard : Installed MiniTools Partition Wizard v9 in my laptop however my external HDD is not showing in the tool as Disk2.

Could you please help me to get the issue resolved or recover the data at least.


Many thanks !!

Answer:External hard drive is showing 'Unknown Not Initialized'

Welcome onboard.

External HDD - Western Digital Model No/Name: ? Capacity : ?

Please post a screen shot of Windows Disk Management with only the faulty external connected. Disk Management - Post a Screen Capture Image

2 more replies
Relevance 73.8%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

Answer:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Relevance 72.98%

Hi everybody

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

More replies
Relevance 72.98%

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

Answer:FreeAgent External Hard stopped working (unknown, not initialized)

Here are the screen-shots and images again:

6 more replies
Relevance 72.98%

Hey

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:

After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.
I searched and read lots of threads and tested some other stuff:

(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

Answer:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

7 more replies
Relevance 72.98%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

Answer:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

1 more replies
Relevance 72.16%

Have a 1TB Iomega USB3 external hard drive that worked well on both a desktop and laptop Win7/64 system. Now it shows up as unidentified and not initialized using computer/manage/storage/disk management. Disk Management also gives the optiin to initialize it but I declined because I would like to recover the data. The power light comes on and it spins up with both a USB3 or USB2 connections and is identified as an Iomega eGo drive when I use the USB eject function.
Hard Drive Sentinel does not recognize it at all. Any suggestions appreciated.

Answer:Previously functional USB3 external hard drive shows not initialized

1. Please post a screenshot of Disk Management with your external HDD plugged in. Disk Management - Post a Screen Capture Image

2. It would indeed be prudent to recover the data before you try anything else on the HDD.

You may try to access the hard drive booting into a live Linux CD/pendrive.

Download Lucid Puppy (Ubuntu-Compatible Build) v5.2.8 ISO from http://puppylinux.org/main/Download%20Latest%20Release.htm

It is light and only 132.6 MB.

Make a Bootable pendrive with Rufus v1.3.2 (442 KB) http://rufus.akeo.ie/

It takes less than 2 minutes to create your bootable live Linux pendrive.

For more guidance on the recovery process directly get into the heading Recovering files from the non-bootable Internal Drive - applicable to recovery from any hard drive - in Lucid Puppy way to recover files from a non-bootable computer

You may also use this tutorial by Golden http://www.sevenforums.com/tutorials/256518-peppermint3-create-live-cd-dvd-usb-use-emergency-backup.html to create your bootable pendrive with Peppermint3 Linux.

Lucid Puppy or Peppermint3, in either case you can use Rufus to create your bootable pendrive.

9 more replies
Relevance 65.6%

hi all,

i would like to ask you a very basic question:

What is the difference between an external hard disk and an internal hard disk mounted on external enclosure?

Is using internal hard disk in external enclosure risky in terms of loosing the data?

Is using internal hard disk in external enclosure reliable to use?

kindly let me know as there is a vast difference in the price of these hard disks. The external hard disk is costing more and if i use internal hard disk in external enclosure price is very much reduced.

my only concern about using internal hard disk in external enclosure is the reliability.

thanks in advance,

regards,
 

Answer:External Hard Disk v/s Internal Hard Disk in External Enclosure

10 more replies
Relevance 61.91%

What is the difference of 3.5 external hard disk (e.g. WD My Book) vs a 3.5 internal hard disk fixed into an enclosure to work like an external hard disk?

Are both good to be use as an external drive to store backup?

What 3.5 enclosure is good?

Thanks

Answer:3.5 external hard disk vs 3.5 internal hard disk with enclosure?

What do you mean fixed into an enclosure to work like an external drive? Are you referring to a My Book 3.0 VIA USB 3.0.... vs.... an internal SATA III SSD or HDD? Be a little more specific.

8 more replies
Relevance 61.91%

i have a 80gb internal hard disk since it was not sufficient i switched up to a 500gb hard disk so i want to know whether i can use my 80gb hard disk as an external hard disk
if so how please instruct me
 

Answer:how to change a internal hard disk to a external hard disk

Is the 80gb drive ide or sata?
 

3 more replies
Relevance 61.09%

I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB available on the hard disk (unallocated). Disk Management tried to initialized the hard disk and it pops out the following errors:
1. Virtual Disk Manager: Incorrect Function
and
2. Virtual Disk Manager: The device is not ready.

I have also tried using a powered USB cable and also connected in directly to the MoBo via SATA but the problem still persist.

I also ran disk part and it shows Disk 3 and Disk 4 as both online but both having size of 0 B

Below is the screen shot of Disk Management. When i right click on the HDD, there are four functions: Initialize Disk, Offline, Properties and Help however the the Initialize Disk function is greyed out.



I have Partition Wizard 9.1 and the attached picture below is the screenshot of the main GUI. It shows bad disk on the particular hard disk
Click image for larger version.



I tried running Partition Recovery Wizard on the mentioned HDD and it shows a partition of only 512 Bytes but none of my files are visible (no preview)



I just need to retrieve the files in the Hard disk as it contains important files and pictures that havent been backed up. Any help and suggestions are welcomed! Thanks

Answer:disk not initialized in Disk Management. Device Not Ready.

I submitted this post in tenforums and sevenforums on an old thread. Its better to start a new one. THis is the reply from jumanji from the sevenforums thread. I will continue posting replies on this thread instead
disk 1 is unknown, not initialized, unallocated








  
Quote: Originally Posted by jumanji


I am still trying to understand your system.

Please furnish the following Information.

1. You have a Windows 10 System. Is it a custom-built one? Built by you?

2.In the Windows Disk Management I see three drives.Disk 0, Disk 1 and Disk 2. All three Internal?

3. You are now trying to plug-in /connect two drives. But both of these cannot be accessed. Right?

Now the crucial question. 4. Where were these drives before? Please give the history of both drives. Both drives data drives? What happened to the system from which they came?

I may not be able to deal with the drives connected to Windows 10 - for I don't know how it will treat alien drives. As I see it both drives are bad ( In Windows 10).

I do understand that you have a SATA to USB adapter. Can you just take one drive - mark it as No 1 --, connect it to a Windows 7 system and post the screenshots of Windows Disk Management and PW screenshot? Always post full screenshots with all information seen and not truncated/cut screenshots.

Mark the other drive as Drive 2, unplug drive No.1 , plug in drive No2 and again repeat the screenshots. We shall not mix driv... Read more

3 more replies
Relevance 61.09%

I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB available on the hard disk (unallocated). Disk Management tried to initialized the hard disk and it pops out the following errors:
1. Virtual Disk Manager: Incorrect Function
and
2. Virtual Disk Manager: The device is not ready.

I have also tried using a powered USB cable and also connected in directly to the MoBo via SATA but the problem still persist.

I also ran disk part and it shows Disk 3 and Disk 4 as both online but both having size of 0 B

Below is the screen shot of Disk Management. When i right click on the HDD, there are four functions: Initialize Disk, Offline, Properties and Help however the the Initialize Disk function is greyed out.

I have Partition Wizard 9.1 and the attached picture below is the screenshot of the main GUI. It shows bad disk on the particular hard disk
I tried running Partition Recovery Wizard on the mentioned HDD and it shows a partition of only 512 Bytes but none of my files are visible (no preview)

I just need to retrieve the files in the Hard disk as it contains important files and pictures that havent been backed up. Any help and suggestions are welcomed! Thanks

Answer:disk not initialized in Disk Management. Device Not Ready.

This thread is continued on sevenforums:
disk not initialized in Disk Management. Device Not Ready. - Windows 7 Help Forums

1 more replies
Relevance 61.09%

I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB available on the hard disk (unallocated). Disk Management tried to initialized the hard disk and it pops out the following errors:
1. Virtual Disk Manager: Incorrect Function
and
2. Virtual Disk Manager: The device is not ready.

I have also tried using a powered USB cable and also connected in directly to the MoBo via SATA but the problem still persist.

I also ran disk part and it shows Disk 3 and Disk 4 as both online but both having size of 0 B

Below is the screen shot of Disk Management. When i right click on the HDD, there are four functions: Initialize Disk, Offline, Properties and Help however the the Initialize Disk function is greyed out.

I have Partition Wizard 9.1 and the attached picture below is the screenshot of the main GUI. It shows bad disk on the particular hard disk
I tried running Partition Recovery Wizard on the mentioned HDD and it shows a partition of only 512 Bytes but none of my files are visible (no preview)

I just need to retrieve the files in the Hard disk as it contains important files and pictures that havent been backed up. Any help and suggestions are welcomed! Thanks

More replies
Relevance 60.27%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

Answer:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Relevance 60.27%

 USB.jpg   66.11KB
  0 downloads
 USB1.jpg   94.2KB
  0 downloads
 USB2.jpg   90.44KB
  0 downloadsDear all,
I will enclose here my complaint which I send to motherboard maker Gigabyte, regarding USB external hard disk problem. Please read it and if anybody knows how to solve this, thanks.
--------------------------------------------------------------------------------
My computer has external hard drive connected to USB 2.0 port(s), which is extremely slow. Drive is Transcend StoreJet. No drivers exist for it. It works perfectly for other I/O operations like copy, paste, delete,etc. When I try to make hard disk image with any program, and store it on Transcend Store Jet, speed starts with 50MB/s but drops to nearly zero in few minutes. You can see example on attached picture. It is the same with any program. Disk image would take more than one day to complete, if it completes at all. Actually, I never managed to finish image with any disk imaging software. I tried all usual software for that: Paragon, Aomei, Acronis, EaseusToDo, Drive XML, etc. Are there any USB or other drivers which are responsible for this issue? Can Gigabyte be serious regarding its costumers and provide them solution in order to use USB ports for most important thing (backup)? In this case, making disk image is totally impossible. USB 2.0 ports have speed оf 480 Mbit/s, theoretical. This is far cry from situation here. So, ... Read more

Answer:Problem with slow (impossible) disk image making on USB 2.0 external hard disk

This could be any issue causing your problem , software , usb drive may have errors on it / or ?
Imaging your 150 Gig via Usb will take time { Mine are about 40-50 Gig } Operating System And Programs Only.
 
I personally partition my main Drive eg: c:\ and d:\ and so only the operating system is on C;\
Then use the D;\ to store your personal files. , this way your c:\ wont keep growing in size as you are storing everything there.
If you cant actually do anything with the computer because of warranties as you stated "just serviced" , ask them why you cant Image Drive.
 
Options:
1/ Try another hard drive to backup to.{ Usb will always be slower } than directly connected to Mobo.
2/ Use Mini Tool Partition Wizard [ Free } to create another partition - http://www.partitionwizard.com/partitionmagic/partition-windows-7-system.html
3/ Remove all Temp Files / Restore Points / etc with Ccleaner { Free ] - https://www.piriform.com/CCLEANER
    this will reduce C:\ size to minimal size { defrag drive also }.
4/ Use any program to Image C:\ { I use Acronis }. to the D:\ Backup Folder.
5/ Then copy the image to any portable drive or external if need be.
6/ Use the D:\ for your personal files and folders as a backup also.
 
Sometimes you have to do things yourself - than rely on Service Centres and Costs.
If you run a Business then you claim all your costs incurred.
 
All this will take time but you will have backups and feel at ease.

6 more replies
Relevance 60.27%

I have an Asus Vivotab Smart running full Win8.1 and a Western Digital My Passport 2TB external HDD. The hard drive works fine on other computers running 7, 8 and 8.1. The tablet can read other hard drives fine as well. But this one hard drive will not function on just the tablet. I've tried deleting the drivers and letting Windows reinstall them as well as installing the latest drivers from the WD site. I've tried using a different cord, a different adapter and other USB devices on the tablet. The HDD shows up in Devices and Printers when plugged in but not Explorer and NOT Disk Management at all. Now if I delete the drivers it appears in Disk Management as an offline and not initialized drive, no drive letter. I can't initialize it and trying to set it to Online results in an an I/O error. When i unplug it and plug it back in Windows appears to be reinstalling it, but then it's back to not appearing in Disk Management at all.

This occurred when it was just Win 8. I upgraded to 8.1 and it worked for about 8 hours. The drive installed and functioned 100% after upgrading to 8.1.....and then just stopped working again. Same issue. Again, the drive works fine in every other computer I connect it to. Every other drive and USB device works fine when connected to this tablet. Just this one drive on this one tablet refuses to initialize.

Any ideas?

Answer:Wd External HDD Not initialized

Tablet might not have enough power thru USB, smaller devices could work and this one is probably pulling too much. If that's the case you can connect it thru an USB splitter with it's own 5V power supply but that won't make it as portable.

3 more replies
Relevance 59.86%

I have a problem regarding my external Toshiba hard disk 500 GB where it can?t be detected in my computer and also disk management. I have formatted the external HD since I was asked to format it when an error popped up.
So I formatted it and after the formatting completed, I tried to connect the hard disk to my Windows Win 7 laptop. When I connect it to the laptop, it can?t be detected and yet the hard disk is blinking with its white light like it used to when it is connected to the laptop. I tried the disk management thingy, but it can?t detect my hard disk. I tried in other laptops but the result is same
What can I do to make it better? Please help me.
 

Answer:External hard disk not detected in My Computer and in Disk Management

First off, how old is your Toshiba external HDD? Also, when it starts to spin up, do you hear any sort of clicking or whining noise?

If you hear any noises that sound off, it's possible your external HDD is failing.

When you formatted it, what file system did you use to do so? Because sometimes even if Windows can't detect it, I have had success with booting with a Ubuntu Live CD, and then connecting the external HDD in order to format it that way. It all has to do with how Windows formats HDD's and how Ubuntu and other Linux systems do.

If you can I recommend downloading Ubuntu onto a CD and boot to it on one of your computers, in the Live CD mode, so it doesn't install anything. Once its loaded, plug in the Toshiba and try to format it as NTFS (this is important, because Ubuntu doesn't use it as a native file system, so you need to make sure that NTFS is selected on the format window, not EXT4 or the other types of Linux OS File Systems)

If it doesn't work, post back here, and I will see if I can help you some more. Also feel free to PM me if you have any other issues.

Regards,
-Alex
 

1 more replies
Relevance 59.86%

Hi, My Seagate 2TB external hard disk is not getting detected by my PC, doesn't show in 'Safely remove hardware' option.

However, based on one old thread, I installed Partition Recovery Wizard and this is how the scan looks. Please help.

Answer:External Hard Disk not detected, visible in Disk Manager

Please find the screenshot of disk management

9 more replies
Relevance 59.86%

If I am saving a backup to internal hard disk vs USB 3.0/2.0 USB external hard disk

1. Backing up to an internal 3.5 hard disk vs backing up to an external 2.5 hard disk using USB 3.0, roughly how much extra time would the external backup need to complete the backup process?

2. Backing up to an internal 3.5 hard disk vs backing up to an external 2.5 hard disk using USB 2.0, roughly how much extra time would the external backup need to complete the backup process?

Thanks

Answer:Speed of saving to internal hard disk vs USB 3.0/2.0 external disk?

There's no definitive answer, it would all depend on which internal drives you had (SSD/HDD, SATA 6GB, SATA 3GB) and which external drives you had and their relative transfer speeds. It's all just guesswork without that info.

2 more replies
Relevance 59.86%

Hi, My Seagate 2TB external hard disk is not getting detected by my PC, doesn't show in 'Safely remove hardware' option.

However, based on one old thread, I installed Partition Recovery Wizard and this is how the scan looks. Please help.

Answer:External Hard Disk not detected, visible in Disk Manager

Please find the screenshot of disk management

9 more replies
Relevance 59.86%

Couple of hours ago my Windows 7 could not recognize my external USB hard disk (Maxtor Basic). It came up on Disk Management and Device Manager but not on My Computer. However I fixed it (by deleting its line off regedit in HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices, plugging out the ext. HD and plugging back in). Windows automatically installed the drivers and I could access the drive.

But now Windows shows my Maxtor as a fixed disk drive, instead of "devices with removable storage". I still have the option to "Safely remove hardware and eject media" from taskbar, however I rather have Windows treating it as a Removable USB Storage so that the disk can sleep when not in use. I am pretty sure it has something to do with regedit, so any help would be appreciated.

Answer:USB external hard disk shows up as internal fixed disk

Welcome to Windows 7 Support Forums, Sactyr.
A word of caution! Its never a good idea to alter your register,
IMHO please review your device manager and check your devices for your disk drives, check for any warnings in the driver area.
I'm attaching my screenshot for comparison as I have a similar configuration.

8 more replies
Relevance 59.45%

Hello there. This is my first post at this forum.

I have a probably 6-7 years old WD Elements 1TB external HDD. When I connect it to PC via USB I can hear ordinary HDD detected sound and after that it sounds some short beeps at 7-3-3 order. Here are some screenshots of my situation. Is there any way to recover my data stored in this HDD? My priority is saving my data but saving HDD would also be cool

Help me SevenForums-Wan Kenobi you're my only hope.

OS: Win7 Ultimate x64

Answer:External HDD is Unknown and Not Initialized

Jumunji is one of the best recovery techs around! However, I can ask this: Did the computer use the Smartware and DriveUnlock when operations were aok? If so, my best guess is: get the Smartware and DriveUnlock back to the aok-days' operations.

3 more replies
Relevance 59.45%

I have an external hard drive from home (160 GB iOmega) formatted in I believe FAT32 with all my data on it from my iMac. I'm trying to connect it to my new ThinkPad to get my data. It doesn't show up in My Computer, but in Disk Management there is a Disk 1 that has a black bar at top instead of blue, says not initialized on the side, and says unallocated under the bar. Also, when I open Disk Management it offers to initialize my disk, but I fear that would erase my data.

How would I get my computer to read the disk but not erase my data?

Answer:External HD not initialized, need data from it

Welcome to Seven Forums.
Here is a pretty good trouble shooting guide Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter - TechSpot OpenBoards You might want to try some of the suggestions posted.
Fabe

9 more replies
Relevance 59.45%

I have a 300GB usb external hdd, when I plug it in it beeps but does not show in "Computer". I right click on Computer/Manage/Disc Management and it shows there as 298GB Disk 2 Not initialized. A box appears, saying you must initialize before Logical Disk Manager can access it. When I click on OK I get the message Data Error (Cyclic Redundancy Check)
If I go to the box to initialize it everything is greyed out.
There is nothing of any importance on the drive so if everything is lost it doesn't matter.

Answer:USB external hdd problem, not initialized.

This youtube video will help you do a chkdsk from Command prompt CLICK HERE if it works you might be able to recover the files.

3 more replies
Relevance 59.45%

Hi,
 
I'm not even sure what the topic title should be. But I can tell you about my problem.
 
I plugged in a new Bipra 250 GB NTFS external Hard Drive with the intention of using it to clone my C Drive.  A scan of the new drive reported no errors.  However, when I tried to run AOMEI Backupper it quit with this message: 
 
Information Code:4120 
Failed to adjust partition size.
 
Although I could see the drive when I clicked on Safely Remove Hardware, I could not find the drive in Explorer.
 
In Device Manager the disk was listed as Mass Storage Device USB Device.  I tried updating the driver, but MS says the driver is up to date.
 
In Disk Management, the disk showed  as Disk 1  Basic Online.   232.88 GB  - Unallocated. 
 
Online I found information that said to right click the drive and choose New Simple Volume.  I did that. It ran. Still the drive goes unrecognized and I am unable to clone it. 
 
I tried a reboot with the drive plugged in.  When Windows started, I could see the drive in Explorer but a message said:  Location not available.
 
Well, dirty word. -- And now that is gone too and the drive once more shows as unallocated in Disk Management.
 
More info online tells me to partition the drive after running New Simple Volume. But now I'm afraid to do that, and I don't know why that is necessary. 
 
Also in Disk Management Help the in... Read more

Answer:asNew external HD not Initialized?

Can you post an image of Disk Management with the USB drive attached?
 
Edit: You can use Partition Wizard to create a partition in the unallocated space and format it NTFS.

1 more replies
Relevance 59.45%

Is it possible to create the recovery media on an external hard disk instead of using USB flash drive or optical media?

I've been getting errors while creating the the recovery media on optical drive.

Thanks!

Answer:How do I create a recovery disk using external hard disk?

Hi

As far as I know it?s impossible to create an Toshiba image on the HDD?
You need to burn the image on the disk (DVD).

Greets

2 more replies
Relevance 59.45%

My computer keeps refusing to start up. I have to re-install windows each time. Hard disk keeps making a "funny" noise. I have an 80gb hard drive and have used 40gb so far. I want to back up everything incase my hard drive fails. Could I backup to an external disk drive? would I need to install windows on the external drive. or is there a better way to save all my files, downloads, and software? When I bought the PC it came with software already installed and a recovery disk. But obviously I dont want restore to factory settings as I will loose everything. Any advice would be much appreciated.

Answer:backup from hard disk to external disk drive

You could use commercially available back up software like Ghost click here or Acronis click here

4 more replies
Relevance 59.45%

I have an external hard disk which got corrupted. When i connect the disk through USB it shows as an unknown device in the disk management with no option to format.

In My computer the device is showing as H: drive but unable to access it. It asks if i want to format or not but when i go for format it does not do it. I want to erase the disk completely as of now. What should i do??

I tried to load it from linux but there it shows as Device Error. Disk Failure is Imminent.

Can something be done or is it a hardware failure.
 

Answer:External Hard disk showing as RAW in disk management

Sounds like the drive is failing or the circuitry in the enclosure is faulty.

I would first remove the drive from the enclosure and hook it up as a slave to a desktop PC. See if you can then access it. If you can, then post back for further instructions with the version of your OS.
 

3 more replies
Relevance 58.63%

Gday

I have emailed Paragon and am awaiting there reply, but you guys seem to know a lot more and try and solve the problem

Up to this point I have used either Acronis or Paragon for my backups, I prefer Paragon over Acronis, mainly because the restore by Paragon is far quicker.

I have both bootable CD's, but in this instance I would like to concentrate on Paragon.

I downloaded Paragon's Advanced Recovery CD. 2009 Build 6730. Put it in my rom and booted ....... looked at a black screen for 10 minutes. Removed it and rebooted, it got stuck at the loading of Vista, then I got another black screen no hard drive movement.

Rebooted again, this time with the regular Paragon bootable CD. It booted into the recovery console.

Now this is where things go from bad to worse. I tried finding my OS, after a lengthy period I received an error disk 2 i/o fault!!! ....... no operating system found.

Now disk 2 is my external hard drive where my backups are kept.

So I rebooted with the CD in, went into the recovery console and clicked on "safe restore", after playing the waiting game I get a message disk 2 i/o fault!!!.

Took out the Paragon CD, put in the Vista one, tried a repair, but there was no OS to repair .

So I installed Vista, and because I didn't want to have to reinstall all of my programs again (yer lazy I know, but that's what backup's are for).

Checked with the fresh install, that my two external hard drives, had there drivers and were present. They were ... Read more

Answer:Paragon Hard Disk Manager Suite & USB External Hard Drive

Anyone?

3 more replies
Relevance 58.63%

hi there..

my name is Anis...i just bought external hard drive 500gb...but after I formatted it..it's just about 400++ gb can be used..i would like to know..how to use the extra/reserve space for my ext hard disk?by any means, i want to fully use my 500gb space for the external...please help me...thank you...
 

Answer:How to fully use the extra hard disk space for external hard drive?

It should have about 465GB, what are you seeing?

You will not have 500GB due to the conversion between binary and decimal for reporting sizes.
 

1 more replies
Relevance 58.63%

Hey guys,

I have this new Western Digital My Book that I got about 6 months ago and it suddenly will not show up when I plug it in. I tried looking for solutions on what's happening but I can't get past the first few steps, until I found one where it says that the drive is probably toasted! Anyway, I'm still not giving up hope. I tried it on two computers, I tried uninstalling and reinstalling the driver but it's still the same. I tried initializing it and it's giving me "The request could not be performed because of an I/O device error". I would like to chkdsk it but I forgot what the drive letter of the hard drive, so I can't really search it.

Here're some screenshots.


Also didthis :

Thanks for your time!

More replies
Relevance 58.63%

Please help me fix this problem. any information you need just ask me i will tell you all you need.

Thanks in advance

Answer:How do i fix unknown, not initialized and unallocated external hd?

Right click on it and choose Create Parittion. Choose the type of partition. Then format it. I recommend doing the slow format. It may take an hour or so, but I think you're better off in the long run.

9 more replies
Relevance 58.63%

Hello to All,
I have a 500 GB external USB drive that I can't access on my wife's Windows 8.1 laptop. I have confirmed that is in good operating condition on my XP PC where I can access all my files but in Computer Management on the Windows 8.1 laptop it displays as Disk 1 with a red arrow pointing down and it says Unknown and Not Initialized. Can someone help?
Thanks
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 7908 Mb
Graphics Card: Intel(R) HD Graphics Family, -1984 Mb
Hard Drives: C: Total - 940362 MB, Free - 902392 MB;
Motherboard: Dell Inc., Inspiron 5537
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

Answer:External USB Drive Unknown and Not Initialized

With the USB drive plugged in, go to Control Panel > Device Manager. Then see if there are any yellow exclamation marks. Try right click, update driver.
 

3 more replies
Relevance 58.63%

I have this WD 1TB external drive that stopped working a while ago. I am trying to initialize it in order to perhaps try to recover data from it using a Data Recovery Wizard.

When connecting the drive via USB, it only sometimes shows up in 'Devices and Printers' as connected through USB (ie, it allows me to click 'Eject My Book' in the task bar). When it shows up there, I can also see it in Disk Management as 'Disk 2, Unknown, 931.51 GB, Not Initialized' with a little red downward facing arrow icon.

When I right click the icon (with the red arrow) and choose Initialize, it hangs a bit and then shows an error saying "The request could not be performed because of an I/O device error"

When I run 'USB device viewer' (UVCView) this is what shows up next to that device :






Quote:
---===>Device Information<===---
English product name: "My Book"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: High
Device Address: 0x02
Open Pipes: 3

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00

==... Read more

More replies
Relevance 58.63%

Can you help me? I got the same problem, sometimes my external driver say it was online, not initialized and some times it RAW, i was watching a movie but i kicked my external driver so it was forced to unplug, since then when i want to plug in it again the driver can't show up
Well this is my friend external driver and inside it my friend have 300gb files please help me

Sorry for my bad english

Answer:external drive say it was online, not initialized, and sometimes RAW

Hi andremarb,

Welcome to SevenForums.

From the description of your problem, I would think that the cable could have got damaged due the unceremonious kick that the HDD received. So as a first step use a new cable and check how your external drive behaves.

If the problem persists, please start a new thread explaining your problem in detail. Furnish full details of your external drive make/manufacturer/ Model /Capacity along with a full screenshot of how the drive appears in Windows Disk Management. Please adhere to the guidelines here Disk Management - Post a Screen Capture Image

In the new thread, even if it is not me - so unreliable these days , some one else can address your concern. So move on with the new thread.

EDIT: Just noted that your post has been moved on to a new thread. But this post still holds - more details and screenshot after changing to a new cable.

1 more replies
Relevance 58.63%

Please help me to get my important data from my bad hard disk,

I have a segate 500 GB usb external HDD, It was working fine since last 3 years. yesterday i connect this to a XP machine, and start coping some data. the coping speed was very slow, so I restarted the machine in between. After that I LOST MY hdd, it never be back. I tried a lot.. no success till now.
Please help me get my data back:

Answer:How do i fix unknown, not initialized and unallocated external hd?

Sorry to be the bearer of bad news ... but I had almost exactly the same thing happen to me on a Seagate 2TB hard drive. Working for months, even passing surface checks with no errors and then, one day -- "bad disk".

I've tried every data recovery app I could find against it (4 of them) and none of them find anything.

I've had drives fail me over the years and have never run into this situation where the drive powers up but NOTHING can be recovered from it.

So, I've resorted to sending it off to a local data recovery outfit

9 more replies
Relevance 58.63%

Hi I have a wd 2tb external hard drive problem (i think its dead) Yesterday my hdd was working fine i powered down went to bed this morning I couldn't find my drive in my computer.
i opened up computer management and selected disk managment. at the top it shows my c drive and system reserved at the bottom it shows the c drive and drive 1 stating its not initialized.(see attached screen shot)
when i tryed to performe this task it gives me an error of the request could not be perfomed due to an I/O error.

i have checked all cables and replaced this hasnt helped.
i downloaded partition find and mount which shows my hdd but states it has 0kb (see attached screen shot).after scan no visable partitions no newpartitions.
i downloaded the wd hdd wizard and tryed to write 0 to the drive this failed.
I downloaded mini tool partition wizard that cant find the drive.(screen shot)
I took the hdd to a computer store he couldnt find it in disk management.
seatools for windows results cant find it
disk checkup ran results in screenshot cant run self test
HDD scan
all show 0KB no partitions so my question is is it dead???
 

Answer:WD External HDD 2TB not initialized I/O ERROR is it dead???

Hi, papaikolaou1980. Welcome to Major Geeks!

Unfortunately, none of the screenshots are showing here. But, if you've done everything listed in your post and the drive isn't showing properly, I'd say it "died" and if still under warranty, you should get a replacement. If it's a "green" series rather than "blue" or "black", I'd avoid getting another one as there have been many dependability issues with WD's "green" series.
 

1 more replies
Relevance 58.63%

Dear,
I have an external hard disk 4TB (Western Digital MyBook 25DA My Book Series - External Hard Drive | Western Digital (WD)) with bitlocker enabled (and i know the password).
I was working on it and everything was smooth.
I restarted the PC , after it's booting and logging in to windows, I didnt found the HardDisk in "This PC", I goes to windows 10 64 bit' disk management console and a popup window appears asking me if I want to initialize it.
Any solution do you have for this?

More replies
Relevance 58.63%

I did a clean install of Windows 10 64-bit & now one of my hard drives has an issue. While on the desktop I could access the disk but it was very slow to scan & took several minutes. Once completed it seems to indicate all the folders but I could not access any of them.

Though a restart might help but now it doesn't read at all. In Disk Management it says that disk says "Disk 1 not initialized".

Is it as simple as initializing that disk or might that cause reformatting in which I'd loose 1.2 Tb's of important data?

More replies
Relevance 58.63%

[Seriously need help] External hard disk causes hard drive failures & OS crashes
The thread is rather long. Only read what you think important. Skip the rest!

We have a serious but mysterious problem. We have spent already one week but drawing a blank.
Two hard drives have been crashed and failed (unreadable). One computer has hung a few times unexpectedly and had one weird restart (no memory dump produced).
I suspect all the recent problems have to do with the new USB external hard disk (Buffalo MiniStation Lite: HD-PE250U2).

**********
Formatting USB external hard disk
**********
Originally I would like to use the program given by Buffalo to format the external drive once but we failed. We simply used Windows to reformat the drive into NTFS. I did not use the TurboSpeed advertised by Buffalo, or run its free program.

**********
Case A: Multi-transfer causes system crashes?
**********
The first time we met the problem.
We were trying to help a friend to backup data on an old drive, about a few years old. We plugged in the Buffalo USB portable hard drive and transferred a whole lot of files to the drive. Several cop/cut-and-paste operations were active at that time. The whole system completely froze up. It doesn't respond at all. Only a hard restart could help.
Restarted. Tranferred again. Several cop/cut-and-paste operations were active.
Hard drive crashed - the beginning of the nightmare!
Windows restarted. Chkdsk was running. Saw many lines of messages with:
&... Read more

Answer:[Seriously need help] External hard disk causes hard drive failures & OS crashes

7 more replies
Relevance 58.22%

My external HDD has crashed after unplugging it accidentally while using it. I believe the directory structure has been corrupted. The external HDD shows Unknown, no size, and Not Initialized on the Disk Management screen:

I have tried using MiniTool Partition Wizard as described in this thread.

I'm not sure where to go now to try to recover the data on this HDD.

Thanks for your help in advance.

Answer:External HDD shows Unknown, no size, Not Initialized

Try the Data Recovery tool of Partition Wizard.

4 more replies
Relevance 58.22%

It is my brother's hard drive & it has very important data related to his working. It is a 2tb WD my passport ultra external hard disk which was used as NTFS with only one partition.
My brother told me that he deleted some data from the drive by mistake and was recovering the data from the drive but all the windows recovery programs he used just hanged after few minutes (which is also a sign of bad sectors). Then he done the blundered mistake by formatting the drive, the formatting also not completed due to hang situation.

Now the current situation is that the drive is not showing in the windows explorer and when I open the disk management ,the popup came up for initializing the disk either as MBR or GPT. When I try to initialize the disk, it gives me this error:- "The request failed due to a fatal device hardware error". I have attached a few screenshots below.

I have tried cloning the drive with clonezilla, tried booting the drive with parted magic, Hire n boot and system rescue CD but neither of them recognized the drive and some also rejected to boot with the drive attached.
Now currently i am scanning this disc for recovering the lost partition in the 'Partition Recovery Wizard' software according to the advice on some old thread here, but this software has detected my disk as 'bad Disk' in the file System column as you can see in the fifth image, so i don't have much hope with this software.

Please tell me if there is any hope left for drive like try... Read more

Answer:wd 2tb external drive - unknown, not initialized and unallocated

Hello nsingla and I am sorry you and your brother have this problem!

Things don't look so good now. You've done and tried a lot with aim you need, still looks like the drive's partition table and/or file system are corrupted to a stage that prevents other software to work correctly onto the drive.

I could additionally suggest trying to scan and repair the drive. Try downloading the WD ultra Drive Utilities for Windows and see if you could repair the drive:

Support Answers

If nothing works, the drive is probably too damaged and beyond repair. Hope this is not the case. But perhaps the worst part for the drive was the formatting attempt. Which, by definition, would delete everything from the HDD.

Good luck and post back with results!

CK_WD

4 more replies
Relevance 58.22%

I have a 1TB external my passport USB hard disk.It was working fine till last week but when i plugged it in today windows 7 didn't recognize it.I can see the hard disk in Disk management as "Disk1 Unknown Not initialized" but can't see it under my computer.Also the hard disk light is blinking continuously .When i plug it in USB port it tries to read data and the there is a clicking sound.It clicks few times and then it goes completely silent.
I have tried using various partition tools like MiniPartation and TestDisc etc but they don't even recognize the hard disk

Any help is much appreciated. My priority is recovering data I can buy a new hdd if i can recover data.
Please let me know if u need more info.I am posting a screenshot of disk manager for reference.

Thanks!!!!

Answer:Disk1 Unknown Not Initialized error for external HDD

My Passport is Western Digital. Isn't it?

I am not placing much hopes on your drive. It doesn't even show the capacity.

Anyway let us check your drive with Datalifeguard Diagnostics for DOS.

Please see this post and execute. Please help,disk 1 unknown not initialized (western digital external)

9 more replies
Relevance 57.81%

Hello, I have a Western Digital my passport (1TB). When i plug in the drive, it says that it's successfully installed however it does not appear in "my computer". Also when i go into Disk Management, it says that disk 2 is unknown, not initialized. This is what appear when i open disk management



Can you please help me, i don't want to lose my data, it contain all my videos. please help

Answer:Disk 2 is unkown, not initialized

Guys please cn someone help me. I really need a solution for this.. Pleaseeeeeeee

2 more replies
Relevance 57.81%

Hello,

Trying to get an old external HD working.

Msg. that come up is that the Disk is not initialized.

Gives me the option of doing so.

What does not initialized mean, exactly, please ?

If I do, as the option suggests, will this wipe out everything on the HD, such as a re-format would do ?

Thanks,
Bob

Answer:Disk Not Initialized Msg. Meaning Of ?

It means that Windows somehow failed to recognize the mbr (its signature) as being valid. Initializing the disk will (try to) overwrite its mbr. The partition table is usually stored here.

2 more replies
Relevance 57.81%

Hi, My DVD Recorder died, so I took out the HDD Seagate DB35.2 and plugged it in my laptop. I get the above message in disk management. I also tried Knoppix 7.0 but the disk does not show up. My scope is to save the content in the disk and move it to my PC, is it a mission impossible? Any suggestion is very welcome. Thanks Alex

Answer:Disk 1 Unknown, Not Initialized

I'm not sure you will have much luck if the disk is not readable. You can usually use a Linux distro to try to read it, but you've tried that. If it can be read you can also try Copy & Paste - in Windows Recovery Console. Other than that you could try Recuva and see if that will work. But, if the disk can't be read, I'm afraid there is nothing you can do if those 3 options don't help.

9 more replies
Relevance 57.81%

Hi, thanks for reading this and thanks for your help.

My laptop took a fall and after that it doesnt enter the boot sequence for windows, stops at the laptop manufacturer logo.

I remove my hdd from the laptop and put into a external drive i keep for this purpose, checking hdd?s.

I can?t find the drive in my computer but I can see it in disk managment. It says Disk unknown - not initialized.

I?ve tried using PW but i cant see the drive on there. I would really like to keep my files I have on that drive but it seems to me that it toast.

Regards...

Answer:Disk unknown - not initialized

Quote:
My laptop took a fall and after that it doesnt enter the boot sequence for windows, stops at the laptop manufacturer logo.


That is bad news mate. Usually a mechanical HDD won't survive physical shock like dropping etc. This is because of the microscopical gap between the head and platter. Heads flying height on modern HDDs is about 5-10 nano-meters. For example: an average human's hair is about 25000 nano-meters in diameter. A drop will most likely cause the head to stuck on platter or cause scratches on platter surface.
I would suggest diagnosing the HDD using "Seagate Seatool" and verifying it's health.

SeaTools for Windows | Seagate
Run the tool and select your external HDD for testing. Then choose "Basic Tests --> Shot Generic" and wait for it to finish.

If the test is a pass, run "Basic Tests --> Long Generic". If either of the test fails, the case will be beyond DIY and you should consult a data recovery pro for recovery.

1 more replies
Relevance 57.81%

I have used a hard drive disk for 3 years or so and today when booting I see its not showing and I get a message from disk management that it is not initialized although as I say its been running perfectly all this time and was so reliable that I placed all my "needed program and file on it" ...sad eh If I right click to/and initialize will I loose all my data on the disk..? I see the disk in the management consul as 'disk one 'but with the message not initialized..can anyone help..I saw and saw an old thread but not sure if it the same thing.. Can anyone help please..?? urgent..

Answer:Disk not initialized message

Sounds like your disk has become corrupted, or has otherwise failed. Disks are notorious for failing, just when you think that they are "running well". The only answer for data redundancy is RAID 1 (or a derivative), plus backing up to an external hard drive.

I suggest using some sort of Partition repair program in an attempt to rebuild the disks "Index" thus potentially allowing you access to the disks contents again. However this sort of activity is risky, either you will fix the partition or make the situation worse, in my experience the outcome is usually 50 / 50 - sometimes things end with a smile, and other times a tear!

Best of luck...

1 more replies
Relevance 57.4%

It was working fine the other day, then out of nowhere it just stopped working on my mac, i plugged it into my windows laptop to get a better idea of what is going on, and it says (not initialized, unallocated)

On minitool it says bad disk, and logical type, can anyone explain how to fix this ? I know you have probably gotten this before and gotten bored, but please help me, i mainly just want the files and am prepared to throw this stupid hardrive away

More replies
Relevance 57.4%

Hello
I got my 1tB WD external disk and it's not working as it used to. The problem came from nowhere, suddenly, totally unexpected. There is/was my precious data on it which I collected for 10+ years and I'd like not to lose it.

Origin:
It was working fine a day ago, no problems occured. Hasn't been unplugged since then. Has never fallen. Has never had any kind of error. But: I've seen some kind of ".COM not responding" problem on my PC (don't remember, closed it immediately). I believe my laptop is in a good and healthy condition.

So, what my WD HDD does is:
- it can be seen as a device by my computer. I can plug it out safely.
- diode shows that it's working (not showing the data transfer activity)
- nothing else

What I see in Device Management/Storage is (as in the title):
Screenshot by Lightshot

What programs I used to try to restore partition:
- Mini tool Partition Recovery Home Edition (quick and deep scan, no results. Shows disk as a Bad Disk)
http://prntscr.com/2wpy8s
- Mini tool Power Data Recovery (pro, non-free tool, however after scan there was no results)
- Find and Mount (no results)
- TestDisk (quick and deep scan, no results)

What I haven't tried doing is connecting the HDD directly to the laptop.

Any suggestions?

Answer:External HDD shows as Unknown, Not initialized, Unallocated. Restore?

You should try directly conmcting it. If that does not work, try this: Recover a flash drive turned RAW ? Partition Wizard and TestDisk. Do recovery with partition wizard. (Don't mind the name) But if that does not work, your drive is dead. Like a wise man said, backup, backup, backup!

4 more replies
Relevance 57.4%

This 2.5" SATA drive is from a Toshiba that seems to have died this morning. There's no boot, no BIOS, nada.
I removed the drive and attached it via USB to my Win7 box where it shows as "Unknown, Not initialized, and offline." There are no rt-click options in disk management. I can hear the drive spinning, but it shuts down on its own occasionally, and sometimes won't power up at all without a bit of fiddiling.
I can't get any response at all from my Linux box, and neither Test Disk nor Recuva finds it at all.
Is there anything else to do, or is this drive dead, as I suspect it is?
 

Answer:Disk unknown, offline, not initialized.

If it's not being recognized properly, there isn't anything else that you can do.
 

1 more replies
Relevance 57.4%

Hi

I have the same problem. when i plug in the drive, it says that its succesfully installed however it does not appear in "my computer". also when i go into system tools it says that disk 1 is unknown, not initialized, unallocated

can you please help me, i dont want to lose my data, it contain all my pics. please help

Answer:disk 1 is unknown, not initialized, unallocated

Hello Jenny, and welcome to Seven Forums.

What type of drive is it, and how is it being connected?

Please go ahead and post a screenshot showing the full layout of your Disk Management window to see if that may help ID what the issue could be.

Disk Management - Post a Screen Capture Image

9 more replies
Relevance 57.4%

Disk 1 is unknown, not initialized, unallocated, Please help
disk 1 is unknown, not initialized, unallocated.. plizz help
I already use PhotoRec recovery but "disk capacity not correctly detected"
Disk 1 = seagate 500Gb hdd

Answer:Disk 1 is unknown, not initialized, unallocated, Please help

Start with this free tool. You should try to recover the partition before worrying about recovering the data. If you can recover the partition, the files should be OK if they haven't been over-written.

Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.

Select Partition Recovery Wizard. Choose the drive, then full disk, quick scan. Quick Scan may take 5 or more hours.

If the partition is eventually found, select and double click on it. You should then see all files in the Explorer.

9 more replies
Relevance 57.4%

I recently got a new HDD and took it to a friend's house to copy over some of the data he had (approx. 800GB).

The disk had never been used prior, so he had to initialize it when I brought it over; he's running either Win8 or Win8.1, and it was initialized as GPT with all the other settings at default. It was hooked up via a SATA > USB 3.0 adapter.

I brought the disk home and plugged it directly into my mobo, and Windows was telling me I had to initialize it; without thinking I clicked to initialize it as GPT, and haven't yet created a new simple volume.

What I'm wondering, is if there's a tool (preferably free) I can use either in Windows or a bootable linux distro (the Ubuntu I have doesn't have drivers for my USB wireless adapter, so I'm without internet whenever I boot into it; therefore the distro will need to come with the tool pre-installed) which will be able to copy the data from the used sectors to the unused ones within the same disk, so I don't need to worry about overwriting the data I'm trying to recover. I'd like to do it this way because each of my other two drives have 14.5 and 44 GB free, so I can't recover it to another drive then copy it all back

If there aren't any tools that do that, any suggestions other than bringing it back and copying the data again? (it took pretty long and was a bit of a pain, plus he's leaving for a week in a couple days.)

My set up:
Win 7 x64
1x ocz 128GB ssd
1x seagate barracuda 1TB hdd
1x WD black 4TB hdd ... Read more

Answer:Restore data from re-initialized disk

  
Quote: Originally Posted by vv211


a tool (preferably free) I can use either in Windows or a bootable linux distro..... which will be able to copy the data from the used sectors to the unused ones within the same disk....


Not sure I understand your situation and I don't think I ever heard of such a tool.

I'd think in terms of partitioning the disk and putting all the data in one partition to shield it.

Why GPT?

This is purely a data disk, no OS?

6 more replies
Relevance 57.4%

Hi,

I am using Windows 7 Ultimate 64bit.

I bought a second internal hard drive about a month ago. I partitioned it and used one partition for Windows backup and the other partition is for storing data.

I moved a lot of data from my primary disk on to the partition on the new disk. Everything has been working fine until now.

This morning I booted up the computer and the new disk is not showing in Computer. I rebooted and checked the bios, the disk is showing there so I let the OS boot and then opened Disk Manager. The new disk is showing there too but now it appears as unallocated and not initialized.

How do I fix this and how do I fix Windows 7 so that it doesn't happen again? I really do not want to lose the data on the disk.

Many thanks in advance.

Fido.

Answer:Disk showing as unallocated/not initialized

Can you post a screen shot Disk management?
http://www.sevenforums.com/tutorials...en-forums.html

Screenshot tools.
Screenshot with Paint
Screenshot and Upload using MWSnap
fscapture free download

1 more replies
Relevance 56.58%

I have a Samsung external hard disk drive.
It doesn't detect on Explorer.

System Specifications

OS: Windows 10 - 64 bit
Notebook Model Dell - Inspiron 14 - 5000 series (i7 processor intel)
External HD - Samsung M3 Portable

DISK MANAGEMENT

Sometimes it appears on diskmgmt.msc, but sometimes does not.
Right now it's appearing as "Disk 1 - Unknown - Not Initialised"


DEVICE MANAGEMENT

I can see my hard disk under "Disk Drives" as "Samsung M3 Portable USB Device".
DEVICES AND PRINTERS

My external hd appears in "Devices and Printers" under "Devices".
But cannot be accessed.


MINITOOL - PARTITION RECOVERY

It finds the HDD, but "Partition Recovery Wizard" is not able to recover it.

ALREADY TRIED
Using another cable;
Connecting it in another computer;
Restarted computer several times;
MiniTool - Partition Wizard Free;

Answer:Disk 1 Unknown, Not Initialized - Samsung M3 Portable

Hi rafaelvidal,

Welcome to SevenForums,

1. Complete details of your Samsung M3. Model no: ?? Capacity ??
2. Screenshots: Screenshots and Files - Upload and Post in Seven Forums
3. No overlapping screenshots. In the Partition Wizard screenshot I can't see what is behind except that it is an MBR drive.

Please redo your post for the folks here to understand and help you. If you are not in the Americas please change the timezone (UserCP) so that we get to know whether you are sleeping or awake.

1 more replies
Relevance 56.58%

I am trying to recover data from laptop internal HDD use as an external hard drive to recover data from that HDD. I can't see my HDD in my computer but in DISK Managemnet, there is a message, "Disk 1 Unknown Not Initizalized"

Please Help!!

Thanks,

Answer:Recover Data from Disk that is unknown and not initialized

If the data is critical, and it sounds like it is.. the first thing I would do is use a software that makes a sector by sector backup or image of that uninitialized drive. That way if trying to make it readable by initializing it should hose it, you have a copy.

After that, if you know that the unititialized drive was at one time formatted NTFS then you might try initializing it with Partition Wizard freeware

But it may be worthwhile to talk to someone well versed in disk recovery. There may even be some dedicated forums around for that specialty.

If you get lucky and the Partition Wizard initialization shortcut works, then the files should be there after doing a non-destructive format as NTFS file system.

Assuming that's what it was to begin with.

3 more replies
Relevance 56.58%

Hi, I just got a new Y570 Laptop with a 64 gb ssd. In the disk management window, there are two hard drives listed. There is a disk 0, which has four partitions on it, and a disk 1 which is unknown and initialized. Disk 0 is the HDD that comes with the computer. When I try to initialize Disk 1, I get a message saying The disk cannot find the sector requested. What does this mean? Also, is disk 1 the ssd that I'm supposed to have? Another problem:On my hdd, I have an empty partition that says Healthy (OEM partition). It has no file system or letter assigned to it. It is 14.75 gb, and according to disk management, all 14.75 gb are free. What is it, and can I delete it without affecting anything else on my computer?

Answer:Y570 Unknown Disk 1 Not initialized/OEM Partition

hi galaxion2,first of all, do not delete the 14.75 gb partition. it's hidden/system partition that your computer will need to use it during one key recover process.secondly, as you noticed, disk1 is ssd.

1 more replies
Relevance 56.58%

I have a dell xps 13 9333 which was working fine

I restarted it and I got operating system not found

It has a Liteon 512gb msata SSD LMT-512L9M-11

The SSD is detected in bios. I have connected the ssd to a caddy to try and access via another laptop

However I am unable to do that as well

It does not appear in my computer. When i go to disk management it shows disk not initialized and unallocated

If i try to even create a partition it says Cyclic redundancy check

I have attached some images that may help
Currently i am trying to find partitions using minitool partition wizard. its currently on 33%. Will post a screenshot once thats done

Please can anyone advise what I can do as i need to recover my work from it

Thanks

More replies
Relevance 56.58%

I have this 160GB hard drive that I have not been using for a while, yet I am very sure it was working fine the last time I used it.

Today when I plugged it in to my new notebook that is running Windows 8.1 now, it doesn't detect my hard drive. I also tried on other notebook and it has the same issue. So I know the problem is most likely on the hard drive.

Using Command Prompt, it says Disk 1's status is "Online", but size is "0".

Here is the status at Computer Management:
Disk 1
Unknown
Not Initialized

I also tried to Initialize on MBR, but it returned me with "Incorrect function." message.

I tried "Troubleshoot" and the result says:
"USB Mass Storage Device is an older USB device and might not work with USB 3.0
Plug the device into an available USB 2.0 port..."
My notebook has 3 USB ports where according to the manual, 2 of them are backward compatible to 2.0... I tested on each, but it is still not working.

What should I do? Although I have not been using it for a while, I wish to check the content first before formatting it. I might have some forgotten, yet important files within.

Thanks in advance. Hope I can be assisted here.

Answer:HDD not Detected: Disk 1, Unknown, Not Initialized, Online

If the controller in the enclosure failed removing the drive and slaving it into a desktop PC may let you recover your files. If the drive failed there isn't much you can do.

52 more replies
Relevance 56.58%

I ran BIOS diagnostics on a Dell OptiPlex 3010 yesterday and received an error code (2000-0142) - short self test unsuccessful. I pulled the drive and swapped a new SATA drive to get the user back up and running quickly. I'm trying to connect the drive with the error to my laptop using a StarTech USB 2.0 to IDE SATA Adapter. When I open Disk Management I see Disk 0 (my laptop drive) and Disk 1 (the connected drive). It says Unknown / Not Initialized. When I right click and try to initialize it says "The device is not ready." I've tried the more actions > refresh / rescan. Now when I right click the option to Initialize Disk is grayed out and I can only see Offline and Properties.

I browsed through a thread from about 2 years ago and couldn't find a helpful solution.

The drive: Western Digital 250GB SATA / 16MB Cache - WD2500AAKX

Answer:Disk Management - Unknown / Not Initialized Drive

Have you attempted to run Western Digital's Data Lifeguard diagnostic software? It has a short test and an extended test.

Are you trying to recover anything from this drive? Or just trying to find out if it's broken?

9 more replies
Relevance 56.58%

Hello,

I have used the tittle from another thread as my issue is very similar, only none of what is posted there worked for me.

So I have a WD 500gb HDD. (Actually I am not 100% sure it is a HDD and not a SDD)
I have plugged it in various PC and laptops. When doing so, you get the usual sound que. It also installs the driver according to the little pop up window.
However after that, the drive is not visible in "My Computer".

When I check the drive in Computer Management>Disk Management, it wants me to initialise the disk. Which, I know I do not want to do (thanks to one of your earlier posts) as this will over write my data.
In Disk Management the disk is "Unknown" and "Not Initialised" It also does not give any volume. Pics of both of these attached.

I have tried using Partition Wisord free. It does not even see the drive.
I have tried using Photorec. It does not see the drive.
I have used R-Studio. It does see the disk, but I am not able to scan it. Again also no disk volume. Again Picture attached.

I am hopeful for a solution, as I feel like the symptoms suggest that I do not have a head misalignment. But I might be wrong on that.

Hoping for someone with some mad skills to help me out here.

Thanks in advance!
Variable

More replies
Relevance 56.58%

I am experiencing the same issue as with jenny123 but with an additional problem. I am troubleshooting a Seagate FreeAgent GoFlex 1TB external hard drive for my buddy. It is previously working but one day, it is not detected anymore by any device. It is found in the Disk Management however, it is listed as Unknown, Not Initialized, and not showing the partition as shown in the screenshot.


When I try to change it from Offline to Online, I am encountering the error:
"Virtual Disk Manager: The system cannot find the file specified"

I also used the DISKPART in cmd but it is not showing Disk 1 as shown below.


The external hard drive is found in disk drives but it is not showing it's model name.


I tried all the recommended software (partition wizard, testdisk, icare) but still no luck. I also tried searching online for an answer but there's no closure to their issues as well. Hope someone can help on this as he need a) the drive and b) recover the files in the external drive. Thanks!

EDIT: The drive can be seen in the Devices and Printers as shown below.

Answer:Disk unknown, not initialized, and not showing partition

Hi

For any serious troubleshooting, diagnostics or recovery attempt, you should always connect an HDD to a direct SATA port. Usually you can easily remove the header of any Seagate Golex drive and then connect it to an internal SATA port.

Let us know what "Disk Management" reports when you connect the drive directly.

4 more replies
Relevance 56.17%

Guys i have a similar problem but unlike the problem above my partition magic software does not read my external HD.. The device manager shows the HD is working properly.. and the disk manager shows DISK1 unknown and not initialized.. i m giving screen shot for both of them.. My external HD is WD 1TB HD.. it does not matter if i lose the data..but i want the HD to work[ATTACH][/ATTACH]

Answer:disk manager shows DISK1 unknown and not initialized

I had a Seagate drive fail suddenly last week -- a lot like the situation you described, and neither the Seagate nor the WD drive diagnostics even see the drive when it's in an external drive caddy. When I connect it to an internal drive cable, I get a SMART error and the PC hangs on the boot.

Have also tried Minitool Partition Wizard and some other data recovery apps, which CAN see the external drive, but they can't find or recover any partitions.

Suggest you check with Minitool as they offer a free trial of a data recovery app that might work for you.

This is the first time in years that I've had a drive fail and NONE of the data recovery apps have been able to find anything on the drive.

I've resorted to sending it off to a local data recovery service and am awaiting a quote.

1 more replies
Relevance 56.17%

how to know when was my external hard disk was used or plugged to pc or laptop?
i mean putting monitoring on external hard disk.

for PC's there is a event viewer, what about external harddisk's?

Answer:how to know when was my external hard disk was used?

Hello and welcome to the sevens forum.

First I don't think you can tell when your external hard drive was used, unless you have something on your system that would tell you if it was used or messed with your kind a out of luck so to speak.

You can always set up a password on your external hard drive to lock people out.

4 more replies
Relevance 56.17%
Question: External Hard Disk

I have a LaCie 250gb External Drive - originally I had three partitions, one of 100+GB (G), one of 50+ (P)and one at 1gb (O). The latter proved to be too small and, using PartitionMagic 8 I resized it to 2gb (O) -taking the extra, I thought, from the 50+ (P)partition. However, in the process I seem to have 'lost' the largest partition (G) - containing my backup image. Anyone have an idea what happened? I have run Partitionmagic again - it lists the drive and unlike Partitions O and P which are marked as status 'None' the G Partition is marked 'active'.Please assist in unravelling this problem.

Answer:External Hard Disk

Below are the entries as they appear in Partitionmagic - hopefully this will give someone, better equipped than I, a clue as to what has happened.Lacie (*.) NTFS 187,46... 86,941.2 100,520.3 Active Primary(*.) Extended 51,011.1 51,011.1 0.0 none PrimaryLocal Disk(O:) NTFS 49,010.8 2,011.5 46,999.2 None LogicalLocal Disk(P:) NTFS 2000.2 1,003.4 996.9 None Logical

2 more replies
Relevance 56.17%

Hi
I wanted to buy an external hard disk. My understand is Lacie, Freecom, Sony are good makes.

I looked in the sub 100 pound range, and came up with this list.
can some one suggest how i can narrow it down and select one hard disk, i am even more confused since ext. USB2 hard disks from the same make having quite a difference in their sizes are more or less for the same price.

can you suggest some features which an external hard disk should have?

Freecom Classic 80GB USB2 ext HDD
Freecom FHD-1 40 GB USB2
Western Digital Series II 80GB USB2 7200rpm 2MB cache
Iomega Desktop 80GB USB2
XIMETA Portable NetDisk 80GB USB2 2MB cache 7200rpm
Lacie P2 Model USB2 Mobile 40GB with USB2 Cables
Freecom FHD-2 PRO 20GB USB2 Ext HDD
Freecom Classic 120 GB USB2 ext HDD
Western Digital Series II 120GB USB2 7200rpm 2MB cache
Lacie P3 Model 160GB 7200rpm Ext USB2 Hard Drive inc Cbl
Iomega Desktop 120GB USB2 7200rpm
Freecom FHD-1 80 GB USB2
Iomega Host powered 40GB USB2

Answer:external USB hard disk

go with western digita; your best bet seagate and west make the best HDD's

4 more replies
Relevance 56.17%

So, i tried to pen my external hard disk,
and this is what happened:
The USB Protection i use is USB Disk Security and i dont know if this options (in image) does something about it..
Thanks in advance

Answer:External Hard Disk Help

This most likely is due to USB Disk Security software, if you changed something recently within, I'd try to reverse it.

1 more replies