Computer Support Forum

External hard drive "hanging" or infinite loading.

Question: External hard drive "hanging" or infinite loading.

So I have a pretty, well not old, but it's not a product they carry anymore external hard drive and I had some issues with it in the past (mainly the usb port not being soldered on properly and falling off); so I just received all my replacement cords for it and ran it, it took *forever* for it to load up, which I felt was understandable seeing as there's like 200+ GB on it but when I go to like drag one item from it, it'll take more than 10 minutes and if I cancel it, it just loads.. and loads and loads; I don't know what it's doing but when it's like that, I can't do anything with it and to actually make it browse-able again, I have to force a shut down. (hold the power button)

And the files I am trying to move are just 2.5MB so they shouldn't even be taking this long..

I have quite a few files I wish to save otherwise I'd just format the whole thing but I can't when it just hangs onto the loading.

Is there a way for me to save these files?
I tried to upload them a hosting but it freezes when I do; same with dragging the images into windows paint.

Please help!

I just tried to upload some of the pictures to mediafire and it literally froze my web browser.








Quote: Originally Posted by notsotechsavvy


I stand corrected, apparently this portable hard drive is not done frustrating me just yet.
Pretty sure I forgot to mention what portable hard drive I have and here it is.
The problem I'm having now is that I managed to save the files I needed from it and I formatted it just a few moments ago, but now if I access say like a picture or a video from my hard drive (there is only one file there so there is absolutely NO reason for this hard drive to be slow); it will take forever for it to load/open (my windows picture preview thing actually stops responding and so does any other opener)

That's what it's sitting at currently and will stay like that.

If I were to save that video onto my C: drive and open it there, it would not have any issues; but anything has issues opening from the hard drive.

I have to often restart it so it stops loading and so I can use explorer without it not responding.

I figured, maybe I don't have the drivers or something, so I went to the Seagate website and downloaded their driver software thing; it allowed me to check my hard drive for any issues and such. It came up clean and apparently my hard drive is functioning properly.

So I don't have an answer for this.


Allow me to show you what my Windows Media Player currently looks like and how it'll stay until I force my computer to restart:

Relevance 100%
Preferred Solution: External hard drive "hanging" or infinite loading.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: External hard drive "hanging" or infinite loading.

Fill out all of the System Specs in the lower left hand corner of your message. If we know what is in your PC it will help to better figure out the problem.

6 more replies
Relevance 80.62%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

Answer:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Relevance 76.85%

The hard drive is a Western Digital 320 GB that I've had plugged into this computer before (and worked). Then i got a virus and had to do a recovery of windows.

Ever since then I can't get windows to recognize/show it in my computer. I just "disabled" and "enabled" it in device manager to no effect. I have a C, D, and E drive which are: two partitions on the hard drive, and then the CD drive (respectively).

So i'm stuck, not sure where to proceed since it's obviously not the hard drive itself, I use it on my xbox all the time. What next?

Answer:External Hard Drive doesn't show up in "my computer" but does in "device manager"

Does it show in Disk Management ? ?
Right clik My Computer...select Manage...then Disk Management.
Find the drive...right clik it and select Properties.
Report back with your findings.

15 more replies
Relevance 96.76%

Sorry if this is the wrong forum.

Yesterday my external hard drive was working fine. Today I open it and there's a new folder called Pfiles...I am not running linux...and a tmp file. I delete the tmp file and try to delete Pfiles but it won't delete. Weird. So I open one of the folders and see that it's now empty, as are almost all of my other folders and subfolders. My daughter's folder however has her movies on the main subfolder, but subfolders in this folder are also empty.

The hard drive is showing half full...exactly what it should assuming I could access all the files. So what can I do? I've enclosed a screenshot of the Disk Management screen for this drive. Thoughts?

Thanks in advance.

Answer:Help with external hard drive. Files "missing" but still taking up space on the drive

Hi djfl,

External Hard-drives come in different types, some of them are, External storage devices and Automatic back-up devices.

If it is an automatic back-up device then data might be backed-up on the External Hard?drive without user intervention.

If it is an External storage device the files might be hidden. This could be the reason why the external Harddrive is showing half full. We can check if the files are hidden, please use the following link for detailed instructions to unhide folders: Hidden Files and Folders Option - Add or Remove

Please revert back for clarification.

7 more replies
Relevance 96.35%

Im getting a really annoying problem where my computer will get as far as "loading your personal settings" screen and basically hang up.

I had a virus infection just recently which i cleaned up. A few days later my computer started doing this. It boots up normally until it gets to the "loading your personal settings" screen then it will not go any further.

The mouse responds and there is hard disk activity but nothing happens. I also don't get the windows start-up sound. It will do this probably 9 times out of ten. When it does boot up all the way it works fine and runs perfectly. I had it running for 3 days without any problems.

Some more info:I have tried unplugging the computer from my router, this had no apparent effect.
The computer will boot up fine every time in safe mode & safe mode with networking
I have disabled everything in the start-up apart from AVG FREE edition. This has not had any apparent effect
I ran a check-disk last night and it found no errors.
when it hangs up, ctrl+alt+del does not work, alt+tab also does not do anything
I have downloaded the latest AVG setup file and ran a repair install, this had no apparent effect
I haven't ran system file checker since as the system works fine in safe mode i assume that the system files are probably fine.
i had avast on the system but it got really screwed up so in the end i used the avast uninstall tool to remove it.

I currently have left it sitting at "loading your persona... Read more

Answer:Irritating boot problem (hanging at "loading your personal settings")

Hi cloudflint, only a question, have you try to create another user profile to verify if the problem persists on another account?
It seems to be a profile problem..

6 more replies
Relevance 95.94%

I've been getting the "delayed write failed" error message every time I try to backup a DVD with DVD Shrink to my externail USB hard drive. I've backed up a good many DVDs this way, and haven't had this problem before. Meanwhile I continue to be able to copy other, somewhat smaller files (180MB vs 4GB in DVD Shrink) to the drive without any trouble.

When the error message appears it seems that the computer suddenly no longer recognizes anything on the external drive. Sometimes it still recognizes that the drive is there, even tells me how much space is used up on it, but when I look at the files in Windows Explorer, the files show up as empty, or not at all.

When I try to safely unplug the drive, I'm told there's a problem with ejecting the drive, that it can't be stopped right now. I've waited for several hours to be allowed to stop it, but keep getting the same message. I usually turn off the computer and finally unplug it. When I plug it back in, it sometimes autoplays and all the files are there, sometimes it's not recognized at all until I unplug and plug it back in repeatedly.

I've looked online and there are so many people having problems with that error message, I can't make heads or tails of the issue. The only thing I've tried from the Microsoft site is that I turned cache writing off for the external drive (not the internal one) under policies, which I thought is supposed to make it possible to unp... Read more

Answer:"delayed write failed" during dvd shrink on external hard drive

I would upgrade the Laptop ram to 512 or a gig, see if the problem stops.
 

1 more replies
Relevance 95.94%

I was using my external HD to backup data from my laptop (I plan on doing a system recovery).  The HD had originally been hooked up to my PC with no problems.  A few minutes in, the transfer stops and I get a message that the drive is not ready.  Now when I try to access the hard drive from either the PC or the laptop I get a message that says "Please insert a disk into drive (letter of the drive):".  Something I noticed, not sure if it's relevant, is that originally the HD was (G:) on the PC.  When I connected it to my laptop, the drive was recognized as (F:).  After I got the error and connected it back to the PC the HD was recognized as (F:), same as the laptop but different than it originally was on the PC.I'm running XP Home on both the PC and laptop.Can anyone please help?

Answer:External Hard Drive Problem - "Please insert a disk into drive _:"

I may be mistaken, but I understand, that external HD will work only with the computer on which it was created.Have that external HD ever worked? Is it genuine external HD, or internal with enclosure?

4 more replies
Relevance 95.94%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 162570 MB; D: Total - 29690 MB, Free - 27584 MB; G: Total - 305211 MB, Free - 174064 MB; H: Total - 15259 MB, Free - 3249 MB;
Motherboard: LENOVO, MoutCook
Antivirus: avast! Antivirus, Updated and Enabled

Am I embarrassed! I have had external drive for backup and to have an image on it. But I am so dense that I don't know how to restore. I have the manual which tells me to go to the "welcome" screen but I can't open any screens of the software. The software is WD SmartWare. . These are the files in the folder. Should I start all over by hitting the .exe file? Any ideas? I'm getting paranoid knowing that my external hard drive backup is useless to me because I don't know how to restore.
thanks
 

Answer:WD SmartWare software on "my passport" external hard drive

heyya americamba, I'm going to close this one up, as you have another one in hardware at http://forums.techguy.org/hardware/1118901-my-passport-external-drive-wwd.html, and that one is in the correct forum.

thanks for understanding.

v
 

1 more replies
Relevance 95.94%

First of all I'd like to say hello to everyone on this forum, this will be my first thread/post.

I'm usually the go to guy for my friends for simple computer problems, and my friend came to me today with a problem I just can't figure out.

She received an external 230 gb HDD for christmas and then tried to install her Sim expansions onto it. She gets the message
"Cannot install to the selected directory, because it may cause the system to become unstable"

After googling this issue for about 30 minute I found this is the case for other games as well, but none of these searches yielded any kind of answer of how to get passed this, or why this happens.

As far as I know, her XP HDD is NFTS as well as the external HDD. Has anyone had this problem with The Sims?
 

More replies
Relevance 95.94%

Hello A friend of mine's father passed away suddenly, and she gave me an external hard drive to try and retrieve pictures from for his funeral this upcoming Thursday, she said it malfunctioned when it was knocked over and fell a few hours ago.. I tried it with the case still on and Windows wouldn't even recognize it, so I took apart the case of the external drive and removed the SATA WD Desktop drive to my Hard Drive reader, it shows the Drive under the letter:F and says "The F: Drive needs to be reformatted before any access".. Is there anyway I can retrieve the data from this drive with the current tools I have (Drive reader), along with a potential program perhaps? or will they need to escalate this to a data recovery place that takes the platter completely out and retrieves the information that way?

I am using Windows 7 64 Bit, and this drive reader is pretty good never let me down in the past, I'm just stuck.. Thanks!
 

More replies
Relevance 95.94%

After I finished transferred some files across from external hard drive to laptop and I used a picture from external hard drive as my background desktop but when I tried to click "Safely "remove it said there were programs running yet I have nothing transferring/connecting from external hard drive to laptop then I unplugged the USB device.

I did noticed when I removed the external hard drive my background picture was gone when I went to change themes, I'm worried so Can this damage to the laptop/external hard drive or corrupt software

Answer:I unplugged my external hard drive without "Safely Remove" Can this da

That thing about programs using the drive happens a lot with my Toshiba lappy.
Unless you've changed any of the default hardware policies for the external drive (most of them won't even allow you to), unplugging without ejecting should not be a problem. Nevertheless, whenever you are unable to eject, it is better to wait till you turn off the computer before unplugging.
Hope this helps.
Cheers,
J

9 more replies
Relevance 95.94%

My external hard drive doesn't show up on "My Computer", but when I check "Device Manager", it show up inside "disk drive", and the "Device status" inside the "Properties" shows "This device is working properly". What's wrong?

Answer:External hard drive doesn't show up on "My Computer"

If it has not been assigned a drive letter, it won't show up on My Computer.  This is usually done automatically, but not always.Right-click My ComputerLeft-click ManageSelect Disk MnagementFind the Disk Drive in the Lower Right PanelRight-Click, select "Change Drive Letter"

12 more replies
Relevance 95.94%

Hi All,

I want to format my external hard drive into two partitions so that I can use one of them as a recovery drive for my Windows PC and the other one for my personal data. I am using Windows 8.1.

It is a 1TB WD Elements hard drive currently formatted into one exFAT partition. It is about half full. I don't want to delete the partition and then create two new ones because I have nowhere to backup the files currently on the drive. So I want to shrink the existing partition and then create a new smaller partition but for some reason I can't do that in Windows Disk Management. When I right-click on the drive (E:) The option "shrink drive..." is grayed (as shown in the screenshot).
Does anybody know why this could be? When I right-click on my Windows (C:) drive this option is not grayed out. (I tried doing the same thing using Partition Wizard but I had the same problem - the "split" option, along with a whole lot of others, is grayed out).

Also, another strange thing which might help you to understand. In Partition Wizard, when I right-click on my external hard drive (E:) and click properties it shows that the hard drive is full (first screenshot) even though Windows File Explorer shows that it still has about 500GB of free space (second screenshot)
Why does Partition Wizard (and obviously Windows Disk Management as well) think that the disk is full?

Any help on this would be greatly appreciated!
Thanks,
William.

Answer:"Shrink Volume" Grayed Out - External Hard Drive

You cannot shrink a FAT disk. Shrinking is only supported with NTFS. You have no choice but to backup your data and re-initialize it as NTFS.

2 more replies
Relevance 95.94%

Help - Please!!!  My Desktop decided to install the Windows 10 updates to my Windows 7 environment -- oh the joys!  Nothing but trouble ever since.  I uninstalled 10 to take me back to 7.
Upon reboot all was fine for a day.  Then, black screen with a cursor.  What the heck?  I checked all the things I was told to check, I ran all the diagnostics.  I uninstalled, reinstalled, did a system restore back to before the update.
After spending 3+ hours letting my system go thru the recommended ePSA Preboot System Assessment (All Tests Passed) - Today I have a system that I can't get to boot up because it says I have:
Status:  Oxc000000f
"The boot selection failed because a required device is inaccessible."
I'm not a computer geek.  I can't get thru to anyone at Dell.  I've been trying to resolve this for 4 days now. 
The only thing I can think that is happening is that the computer is trying to boot from an external hard drive that is in a "locked/password protected" mode on my system.  I have no idea how to bypass this.  I've tried unhooking the drive and rebooting and then it just goes back to black screen with a cursor.
Can anyone help me?  Please?

Answer:Can't Reboot Past External "Locked" Hard Drive

Hi DEAR64,
Thank you for writing to Dell Community Forum.
Please check if you can boot into safe mode <F8>.
Do you have the OEM Operating system DVD?
Please private message us the service tag of the system along with your email id (Note: please don't mention the service tag or email id on the public forum as it contains your personal information).

1 more replies
Relevance 95.94%

I just put about 25 gigs of data on this drive. It's an 80 gig drive and has about 20 gigs of space left on it before it's full. Out of all the files I cut and pasted over it got stuck on this last ISO file.. it refused to move this file.. so i stopped the move operation, and rebooted. I never had any trouble with this drive. It's a drive that is hooked up via a USB port. On reboot, to try to copy or move the file again, Windows tells me this drive cannot be accessed and needs to be formatted before it can be used.

That's not an option, or I'll lose tons of months worth of data. The drive is pretty warm.. I'm letting it cool down to try again, but i cant see any reason why this drive could have been damaged just moving files to it.

Any ideas of other reasons why windows might erroneously fail to detect the drive properly and give me this error?

Answer:External hard drive suddenly "needs to be formatted" after a reboot

Hello mate, perhaps checking the HDD will tell you something.

Hard Drive Diagnostics Tools and Utilities

6 more replies
Relevance 95.94%

Let me apologize in advance if this is the incorrect place to post this query - I've seen other similar issues posted in "Hardware" so I'm hoping I'm in the right area...

I've seen this issue posted before, and I've Googled my heart out, but I still haven't been able to find answers to my exact problem. I have a 500GB Western Digital MyBook external hard drive which holds all of my music files as well as back-ups of movies and pictures. Whenever I plug it in, I don't have ten seconds before I get the "Delayed Write Failed" error message, and if I happen to be in Explorer at the time it freezes. I've also got Windows XP on my Dell Inspiron 6000 laptop, if that's relevant.

I got the error message two days ago for the first time, while trying to import a cd using iTunes. It imported the first two songs on the album before giving me the error. Since then I haven't been able to use the drive at all, and when trying to get files from it I've gotten errors saying the path was incorrect (as if the hard drive weren't plugged in). I tried using the hard drive yesterday on my dad's IBM laptop (also running XP) and had no problems sifting through the files in Explorer, however opening a movie in Windows Media Player caused that program to freeze. Today I plugged it into the IBM laptop again and tried the same previous album in iTunes, but this time it didn't get past the first song before it gave ... Read more

Answer:"Delayed Write Failed" on External Hard Drive

Check for malware. Also, a delayed write failure is this:

this is how external drives work with xp:

1. you tell a file to be copied to the ed (external drive)
2. Windows checks the file size and compares it to the free space on the ed.
3 Windows allocutes the space needed and queues segments of the file to be copied. (usually 1 file = 1 segment)
4. Windows starts copying segments to the drive in order of the queue.
5. the files finish and the transfer completes.

The delayed write failure is when one of the queued segments fails to copy.
This could be because of the hard drive failing so check for hdd errors but its more likely a windows issue.
 

2 more replies
Relevance 95.94%

I have -- "had" -- two SimpleTech external hard drives. One I purchased last year, 320G, and it worked perfectly. But it had an adaptor, and I was getting tired of all the wires cluttering my small computer desk, so I wanted to buy an external hard drive powered by USB only. So last week, I bought a Signature Mini, also by SimpleTech, that was capable of being powered by USB. After formatting it MS-DOS, following the instructions to prep it for use on both Macs and PCs, I transferred all my files from the old drive to the new drive. Then, since I have a Macbook, I used Disk Utility > Zero All Data, to erase all the data from my old drive -- data, which had successfully transferred to my new drive. I planned to give this old drive to my dad.

Using my other laptop which has Windows XP, I began to download some of my data from an online storage website that is going to shut down in about a month. I downloaded these files directly into my new external hard drive, and left the download running overnight.

The next morning, the download was finished, so I unplugged the new drive and plugged it back into my MacBook. The new drive began making clicking noises, and it wasn't showing up on my desktop. I immediately knew that these noises meant an internal hardware problem, so I unplugged the drive immediately. Since then, I have occasionally plugged the new drive in just to see if the problem possibly corrected itself, but it still makes clicking noises and refuses t... Read more

Answer:External Hard Drive: "Zero" Erasure and Clicking Noises

16 more replies
Relevance 95.94%

Hi Everyone!
I am having a serious problem
I bought a new 200Gb external hard drive...after formatting it using NTFS, I now try to open it in Windows Explorer and I get an error saying "invalid parameter", and that's it...it's not opening.
I use WinXP, there is nothing I can do with the HD anymore...anyone has any idea of what I could do?
Thanks a million
 

Answer:"invalid parameter" opening external Hard Drive

Try reformatting it if possible. Does windows detect it still. Try reinstalling usb drivers to make sure thats correctly functioning. Make sure you have updated drivers for motherboard and os as they could be a strange but possible fix to the problem your having. Let me know if you still have this problem after the above suggestions.
 

1 more replies
Relevance 95.94%

Hello 7Forums Guru's. I've never used external media and am trying to decide on a partition scheme for data storage (ISO's, music, pictures about 100-150 gb) and to store weekly backups, system image etc) but before I even start on that end, should my external HDD (Seagate Backup Plus 1 TB) be set to active? The drive was completely plug & play and showed up in Disk Management as "Active"

Please advise this relative n00b.

Attachment 331314

Answer:New Seagate External Hard Drive Marked "Active"

Only a partition from which one boots needs to be active and going by this dictum there is absolutely no need for a partition on an external drive to be active. Though an active partition on an external drive should not matter it is always safe to have only the booting Partition as active.

You can turn a partition active or inactive using diskpart.

Start > All Programs > Accessories > Right click on Command Prompt and Run as administrator.

Then:



Be sure to select the correct external disk and partition.

2 more replies
Relevance 95.94%

I have an older 80 gig WD external hard drive that has worked fine until this morning when I turned on my computer and it wasnt showing up when I looked in my computer. So I went into device manage and it says this "This device cannot start. (Code 10)"

I tried unistalling, and then plugging it back in. I tried looking for updates. Anything I could think of, but still not able to access anything. It has ALL my music on it and I really really want to be able to get to it.

If I cant get it to work is it possible to transfer data from this one to a new one??
 

Answer:External hard drive "This device cannot start. (Code 10)"

7 more replies
Relevance 95.94%

Hey all, I recently upgraded from Windows 7 to Windows 8 and I'm loving it, EXCEPT for this one problem I'm having.

Immediately after I upgraded, my external hard drive (WD Ext HDD 1021 3TB) was missing from "My Computer." I never had any problems with this HDD before I upgraded, and the file-system is NTFS.

The external drive is visible in Disk Management, however there is no letter assigned. Right clicking on the drive's partitions in Disk Management shows every option grayed out except for "Delete Volume."

Upon seeing this, I attempted to use diskpart to assign a new letter, however in diskpart the partition type is listed as "unknown" and when I attempt to assign a letter, diskpart says "there is no volume specified." Listing volumes in diskpart only seems to list the volumes on my internal drive, not the external one.

After reading some articles on similar problems, I tried using the program "MiniTool Partition Wizard" to assign a new drive letter, and it seemed to work! The drive showed up in "My Computer" with the correct name and letter, with all my data intact. In Disk Management, all the drive options were still grayed out, but because I could access my drive, I figured the problem was solved.

However, after a short amount of time, the drive became inaccessible. In "My Computer" the drive's name changed from "cmluepke 3tb external (F:)" to "Local Disk (F:)." Clickin... Read more

Answer:External Hard Drive inaccessible, becomes "Local Disk"

I had this exact same problem with a 16GB Toshiba thumb-drive a few days ago.
I'd been having heat-related shutdowns, and believe this to be what caused the issue in the first place.
Deleting the volume, then re-creating it allowed me to format and assign a drive-letter.
But yes, I did lose the (non-critical - a recorded TV show) data.
I'm not aware of any other 'fixes'.
Wenda.

1 more replies
Relevance 95.94%

I recently had to replace my vista Home Premium operating system. I have my photograph stored on two external hard drives. I am able to access the music and documents on the external hard drive, but not the photographs. When I try to open a folder I am given the message that I do not have "permission to access this folder". How can I be granted that permission to ALL the photo folders ( app 50) on that hard drive at the same time? Very aggravating situation !!!

Answer:how do I get "permission to access a folder" on an external hard drive

Originally Posted by rosemaryheller


I recently had to replace my vista Home Premium operating system. I have my photograph stored on two external hard drives. I am able to access the music and documents on the external hard drive, but not the photographs. When I try to open a folder I am given the message that I do not have "permission to access this folder". How can I be granted that permission to ALL the photo folders ( app 50) on that hard drive at the same time? Very aggravating situation !!!



One tutorial that might help you :
Permission : note - it applies to both Vista and Win 7
Sharing and Permissions - Windows 7 Forums

By the way, is this the message you saw ?


If yes, what would happen if you clicked Continue ?

4 more replies
Relevance 95.94%

So I have a Windows 7 64bit desktop with 2 external hard drives that have shared over my network so I can view the files on my laptop(win 7 64bit) and watch movies and such on my xbox via windows media center.

I recently purchased a WD Elements 2TB external Hard Drive.
I connect the new drive to my desktop along with the other 2 external hard drives and functions with no problems until I try to share it on my network.

My procedure for sharing was opening my computer, right clicking on the hard drive, clicking share with.., advanced sharing, (in the sharing tab) advanced sharing again, click the share this folder box and hitting apply. And I get this error, "An error occurred while trying to share G. Incorrect function. The shared resource was not created at this time."

I was however able to add the new external hard drive to my media library in windows media center so my xbox can see the new hard drive no problem.
So now I need to get the drive on the network so I can see it on my laptop.

Whats more, If I disconnect the hard drive from my desktop, and connect it to my laptop, it will let me share it and I can see it from my desktop. (Baffles me...)

Any help or ideas on this would be greatly appreciated.
Thanks.

Answer:Cant share external Hard drive "Incorrect Function"

I see you have the same issue as I do and are getting about the same help I have been getting, NONE
We will probably find out "Microsoft" will want to charge us extra if we want to share more than one way, they give us ONE free sharing but not 2 without more money.

6 more replies
Relevance 95.94%

I recently bought a Western Digital firewire/USB 2.0 combo drive for my Dell laptop running Windows XP Home edition. It worked fine once. When I went to use it again it would not register in "My Computer." It is recognized in device manager and no conflicts appear. There are no new/rolled back drivers available. In Disk Management in Console it appears but shows a large portion of unallocated space. Uninstalling and reinstalling does not work.

Could there be a corrupt Windows file? Does anyone have any suggestions?
 

Answer:external hard drive not recognized in Windows XP "My Computer"

If it shows unallocated space (how much?), then the drive should be partitioned and the partitions formatted.

What sizes are we talking about? Unallocated space will not appear in My Computer, but only partitions that are formatted and ready to use.

If you have TweakUI or other tweakers, be sure that the drive is not hidden from My Computer.
 

3 more replies
Relevance 95.53%

My 1TB Western Digital External hard disc is not working. My laptop switched off suddenly while copying files. After restarted my laptop, when I try to open my External hard disc drive(G: \) I'm getting the message as

"Location is not available

G:\ is not accessible
The drive cannot find the sector requested"

The Properties of the drive shows as
Type: Local Disk
File system:
Used space : 0 bytes
Free space : 0 bytes

when clicking My computer->Manage->Disk Management(under Storage in left side), I can able to see my External hard disc drive(G: \). The File System shows as "RAW" before it was NTFS, % Free as 100% but I got around 1TB data. Also I checked in different laptops but it shows the same error.

And finally I checked with "Data Lifeguard Diagnostic for Windows", it passed the test.

I'm so afraid about my datas stored in the hard disc. All my projects, photos and many important files stored in that hard disc. I dont know what the problem is. I cant find any solutions in Internet. Please help me to solve this problem. Thanks in advance.
 

Answer:"The drive cannot find the sector requested" - External hard disc is not working

Hey Allen. I would call Western Digital support and see what they say.Since you have data on it you need, I wouldn't play around with it, get some answers from the drive makers, and as is always said, have important data backed up in at least 2 different places, with at least one being to CD/DVD.
 

3 more replies
Relevance 95.53%

Hi
Windows XP PC is extremely sluggish and makes a loud whirring noise, so bought a Seagate external hard drive. I inadvertantly moved the "my documents" folder on to it and now cannot open the folder without the hard drive plugged in. how do I move it back to its original home? It hasn't exactly stopped the extremely slow way the PC opens any file or even surfing the net. Please help!
 

Answer:Solved: accidentally moved "my documents" folder to external hard drive

Restore the My Documents Folder to Its Default Location
To restore the My Documents folder to its default location, follow these steps:
Click Start, and then point to My Documents.
Right-click My Documents, and then click Properties.
Click Restore Default, and then click OK.
In the Move Documents box, click Yes to move your documents to the new location, or click No to leave your documents in the original location.
Let me know if that works.
 

3 more replies
Relevance 95.53%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

Answer:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Relevance 95.53%

Hello,

I am connecting a 640GB Samsung G2 Portable External Hard Drive to my HP Pavilion 15 Laptop.
The external hard drive works on other desktop and laptop computers here at work, but when connected to the HP Pavilion (Windows 8.1 OS) it shows up as a Local Disk (H: but when trying to Open the drive it says:
?Location Not Available H:\ is not accessible The device is not ready.?
What should I do?
Assistance is much appreciated...

Answer:External Hard Drive - Error - "Location not Available"

Welcome to Windows EightForums, jhnel.

Is the drive in the correct format?

Windows key + X > Choose Disk Management. It should tell you format and partition info there.

19 more replies
Relevance 95.53%

I was curious if say you want to replace laptops hard drive, is it possible to do this with an external hard drive like a goflex 1tb external? or is that only for cloning/backupWindows 10 OS dell inspiron 7737

More replies
Relevance 95.53%

I have been using a 500gb Buffalo Drivestation external hard drive to store videos and music for the past several months without incident. However, two days ago when I tried to access the drive in Windows Explorer, the program appeared to freeze. This happened repeatedly, including following system reboots and unplugging/plugging in the hard drive.

When I finally allowed Windows Explorer to 'do it's thing' without ending the process, it informed me that "the file or folder is corrupted or unreadable." If at all possible, I would like a solution to this problem that will allow me to access the data that is on the hard drive at least long enough to copy it to another disk. Although most of the data is backed up, there is some that is not.

In Disk Manager, the drive appears as usual. However, when I tried to run chkdsk I received a message saying that "The root folder on this volume is full". I know for a fact that there is over 200gb of free space on the drive. Chkdsk also said "Error writing folder".

Also, I have tried accessing the drive in another computer - with the same result.

Any help you could give would be much appreciated. Thanks very much!
 

Answer:External hard drive "corrupted or unreadable"

As an additional point... Disk Management says that the file system on the external hard drive is RAW, while Checkdisk recognises it as FAT32.
 

2 more replies
Relevance 95.53%

Hi everyone, my situation was expressed earlier and now that Western Digital Support (a guy named Danny, that had a very thick accent and supervisor w/ even thicker) has $14.95 of my dollars. I need help!

BRIEFING: Western Digital External Drive can't access, found I'm not the only one. Forum suggested an adapter, but that was for laptops. Did research, sucks to be me is basicaly what I found.
So, I read a hint of making an External's HD into internal hard drive, and placing it in your PC.

<There are many tutorials here and the www to learn how to install, so I won't bother any of you with that.>

QUESTION: The Hard Drive I wish to install is from an external case, it has very important data on it and if I put it into my PC, will I lose the data or can I just browse it like before?
 

Answer:Solved: Installing "EXTERNAL'S" Hard Drive...?

providing that the drive itself isn't the part that is bad, then you should be able to acces it as an internal the way you do other drives. This of course depends on the drive itself and your interface. If it is an IDE Drive you would need an open IDE connector in your computer. If Sata then you would need an open sata connection. That being said, you should not lose any data installing it as an internal.
 

3 more replies
Relevance 95.53%

I'll do the best I can to explain this.
I have a 2TB seagate external harddrive. It was showing no signs of problems, worked like a charm. Then, I plugged it into a Mac (usually use Windows) and started transferring a video file to the external.
Then, it started to freeze. Stopped transferring. Crashed.
I had no choice but to remove my external hard drive without ejecting, as everything was locked up.
Then, I plugged the external back into my PC. It showed up fine, but it shows as "E:/Local Drive" when before it was "E:/Seagate" or something to that effect. And, it's completely empty (2TB of free space). Before, I had about 800GB of data. And, the really weird thing is that it is showing up as a FAT32 drive, when it was NTFS before! It almost seems like the Mac purposefully formatted my drive, but that makes absolutely. no. sense.
Then, I ran Recuva (file recovery program) and it started finding all of my old files. Great, right!?
Well, maybe. The issue is that it says it's going to take about 3 days to complete the scan, which is an issue as I have to take my laptop to work. And, I don't have another hard drive big enough to recover the files to. Yes, I can solve this by buying a new 2TB HD, and I will.
But, given how weird this situation is, and given that the files are still "there," I'm thinking something really weird happened, and maybe can be fixed without an arduous file-recovery?
Is it a partition table or something? Is it possible that everything is there, but it's n... Read more

More replies
Relevance 95.53%

It seems I have had a lot of computer related questions lately, but I have had a lot of computer issues lately and I find the people here very helpful. Recently, my dell vostro 3700 laptop crashed and I am trying to recover the files that were backed up on "My book" exeternal drive and I am not sure how to go about doing this.

That program is no longer even installed on my laptop and when I try to install it, it is not picking up the drive at all. Also the light on the drive is constantly flashing green instead of staying solid green. Does anyone know why (already tried restarting it)?
 

Answer:Need help getting files off of my "My book external hard drive" Please help!

That program is no longer even installed on my laptopClick to expand...

It is helpful if you mention what program you used to backup the files onto the external hard drive.
It asos helps if you mention what version of windows you are running and what, if anything, you did to restore the Vostro 3700 to working condition.
 

2 more replies
Relevance 95.53%

Am trying to get an external hard drive up and running!
When connected (via USB) it is recognised by Belarc Advisor, but does not appear in "My Computer" and hence is not usable - can anyone help?
Thanks, Guys.
 

Answer:"My Computer" doesn't see external hard drive

You need to format the drive before you can use it.
Go to start> run and type diskmgmt.msc and hit enter.
Right click on the drive and create an extended partition in the unallocated space.
Now create a logical drive in the new partition and format with ntfs.
Once completed you can use the drive
 

3 more replies
Relevance 95.53%

My laptop stopped booting (You can read about it here:
http://forums.techguy.org/windows-nt-2000-xp/713951-autochk-error-c0000218-bsod-recovery.html )
I've reached a dead end on on trying to restore the OS, so I took the hard drive out of my Gateway Laptop which was running Windows XP Media Center Edition and placed in an external enclosure so I can access it via USB from a computer that will boot.
I booted another notebook running XP Home into safemode so I could take ownership of the Administrator folder in Documents and Settings via the security tab (as described in this Microsoft Help and Support article here: http://support.microsoft.com/default.aspx?scid=kb;en-us;308421)
Now I can see the documents in the Administrator profile, but I can not access or copy them. Also, when I open My Music I can see all the folders for individual artists, but when I try to open the folder I get the "Access Denied" message that I got before I took ownership of the Administrator folder. What's worse, I can't use the security tab to take ownership of those files and folders in My Documents because everything is greyed out.

Help?
 

Answer:"Access Denied" on *now* external hard drive

Sounds like you may have taken ownership of the folders, but not the contents of the folders or subfolders. Go back to the ownership page and be sure to check the box about all child objects. Being grayed out means that that file's permissions are inherited from a superfolder, so you need to change them there.
 

2 more replies
Relevance 95.53%

I have recently re-installed Windows XP which consequently reformat my hard disk. When I plug in my external hard disk USB (which was working fine prior formatting the PC), it does not shows up in 'My Computer'.

When checking Device Manager, the device is working properly. I have verified on Disk Management, the external hard disk is there but with no Drive letters and paths, it mention "unallocated". It does not allow me to give it a drive letter.

During the re-installation on Windows, the external HD was connected to My PC.

The external HD is an Apollo 2.5" portable hard drive 250GB.

On the "USB device properties", under volume tab, the partition style is: Master Boot Record, capacity:238,473 MB, Unallocated space: 238,473 MB, Reserved space: 0 MB and status: Online

Can anyone help me on the above issue. I have some important data on it. Has the disk been erased?
 

Answer:My external hard drive does not show up in "My Computer"

Did you install all of your motherboard drivers, chipset, LAN, sound, graphics, etc. after installing Windows?
 

3 more replies
Relevance 95.53%

I was curious if say you want to replace laptops hard drive, is it possible to do this with an external hard drive like a goflex 1tb external? or is that only for cloning/backupWindows 10 OS dell inspiron 7737

Answer:Can you run laptops OS using an EXTERNAL hard drive as "replacement"

BTW: I did order a replacement hard drive. This question is purely out of my curiosity while I wait.

5 more replies
Relevance 95.53%

I recently updated to Windows 10 anniversary and now I can't find my Western Digital external hard drive in My computer. The PC recognizes it as:
click here in Disk management it's recognized as:
click here not empty and has data inside it. Only after the anniversary update this problem happened and shows it empty in the Disk management. When I right-click on the external hard drive in the "volume" section; all options are grayed out except for "Help"
Is there any idea how to solve this?
and
It's

More replies
Relevance 95.53%

A few days ago, I installed a game on my external hard drive. At the time, the hard drive was assigned the "F:" directory. They other day, I plugged a video camera into my computer before the external hard drive making the camera "F:" and the hard drive "G:".

The game won't work while the hard drive is assigned to "G:". I've removed the camera, there are no other USB devices plugged in (except my mouse which doesn't have any storage capacity) but still when I plug in the hard drive, it goes back to "G:".

I've tried plugging it into different sockets, logging off the computer, restarting the computer, but still, it goes back to "G:".

Why is this happening and how can I get it back to "F:"?

Thanks.
 

Answer:Solved: Can't get external hard drive to be assigned to "F:"

Never mind, I've got it working.
 

1 more replies
Relevance 95.12%

Hi,

I am not sure whether I should be posting this in the Windows forum or the PC Hardware because it involves both.

I have an external 320 GB Transcend Drive with a lot of important data.
Recently, I unplugged it from my PC and took to another to get some files.
One the other machine (Vista), it didn't show up as far as I can remember, thought that was strange so i brought it back to my Laptop (Win 7, Dual Boot with Ubuntu 10) and it only showed as Local Disk, I have tried to find useful information on the net but some is very vague and some is outright stupid and irrelevant.

The fact is that the HDD is not broken. When in Ubuntu I can view the contents fine and everything is there, no freeze ups or anything, but in windows the drive shows up as Local Disk, I don't think it is a drive letter conflict.

The Device shows up fine in the Device Manager.
I'm sure some of you have solved this problem as it seems many on the Internet have.
If so please tell me in a few steps how you resolved it.. I am not formatting as I do not deem this necessary since I can access my data fine in Ubuntu.

Kind Regards

Answer:External Hard Drive Works In Ubuntu / Shows as "Local Disk" in Win 7 and doesn't work

I suggest that while in Ubuntu you move the files to local HDD, then reformat external HDD, then copy the files back.

2 more replies
Relevance 95.12%

My external Seagate drive is apparently "dirty" and windows automatically checks it every time i boot up with it attached to the usb port. It is actually pretty annoying. The only way around it that I found is actually unplugging it before I boot up and plugging it back in after windows starts.

Every time the check says there are no issues. The drive works fine and I am able to use the drive as if nothing is wrong.

Does anyone know whow to get rid of the check during Windows startup? How can I make my drive "clean" again? Thanks

EDIT: I have Windows XP sp3 btw
 

Answer:External hard drive is "dirty" and windows runs a check every time computer boots up

You may need to run a manual chkdsk /f to clear it. Try this
> Unplug the drive then boot up then plug it back in. Determine its drive letter
> Start->Run, enter cmd to open a command prompt
> Enter chkdsk x: /f (except use the correct drive letter, not x)

/f option may take loong time complete (especially if large hard drive.. i.e hours) but when it's done i believe it should clear the dirty bit for you
 

1 more replies
Relevance 95.12%

Gigabyte GA-990FXA-UD3 rev 1.0
Win7 ultimate.

I've got a real problem here.

I had to do an invoice yesterday for a new job. So in my "wisdom", rather than bothering them for a new format I downloaded microsoft office since I couldn't open the file someone sent me.

During the crack I saw a "windows" option was checked - which I thought was probably the version of office but it was actually to activate windows (which was already activated). My computer restarted and hung on "Loading operating system..." and wouldn't load windows so of course panic set in.

I did a search around for solutions and started trying everything I could think of.

I've tried hitting F8 which either does nothing or instantly restarts. I also tried using windows recovery tools which couldn't find a problem. Including this command from another tutorial:

sfc /scannow /offbootdir=[DRIVELETTER]:\ /offwindir=[DRIVELETTER]:\windows

Which also didn't find any problems after a scan. Also tried to do a system restore from the recovery tools which gives me:

"An unspecified error occurred during system restore (0x8000ffff)"

Tried flashing the bios for the above motherboard with the right revision. And I can't do a re-install of windows since to keep my files I have to do it from windows.

If nothing else can be done, is there a way of recovering anything from the drive? This has all been a very hard lesson in leaving things alone.

Th... Read more

More replies
Relevance 94.3%

Win 7
Toshiba Qosmio x500
When i plug in an external pen drive or hdd to any of the USB Ports. a box opens & says 
" Location is not Available, F:/ is Not Accessible, Access is Denied"
I can view its icon in My Comp. but when i double click, error occurs.
This started happening all of a sudden. It was working fine until yesterday.
Plz help.  :'( 
Bobbina....

Answer:Any External Hard drive shows " Location is not Available, F:/ is Not Accessible, Access is Denied", this Error is shown all USB ports.

Hi Vincent,
Thanks for your input.
My problem has been solved.
1 chap from another forum suggested it may have been a fault with my AntiVirus.
He made me check the client policy for USB Auto On/Off for external drive scanning.
he suggested me some changes, & now all my usb external drives work... :)
Yayyy..!!!
Thanks all of you.
Regards.
Bobbina..x
(P.s.: hope the problem does not pop-up again...)

11 more replies
Relevance 94.3%

Hello, I just plugged my external hard drive into my computer, and it is not showing under my computer. If I go to Device Manager it is seen there, it has the most up to date driver etc. I rebooted, thinking that may be the issue, but even after a reboot My Computer still does not see the external hard drive.

I have used it several times before for external storage and even transferred files from the device to pc and vice versa, but now it is not showing. Can someone help?!
 

Answer:My Computer does not "see" External Hard Drive

16 more replies
Relevance 94.3%

I was going to go buy a external hd from BEst Buy or CompUSA, but everything I've read on here says it's cheper and just as good to build your own. Well, when it comes to that kind of stuff I'm basically clueless. What would I need to buy?

For the casing, if I get get a smaller 2.5 or 3.5 inch one would I be limiting the amount of gigs I could put in it?

Would I need to buy a specific type of hard drive for it to fit?

What else would I need?

Any help would be greatly appreciated. Thanks in advance!
 

Answer:Want to "make" an external hard drive

6 more replies
Relevance 94.3%

Hi guys.

I'm having a problem connecting my "external" hard drive to my laptop. Now this is a complicated issue, have searched a lot of forums and threads and have tried a lot of different things but nothing seems to be working. Here's the problem:

My stationary computer resently stopped working, so I decided to go ahead and invest in a Hard Drive Link-in to back up what is on the internal hard drive before sending it with the stationary computer for repairs. Now on this hard drive is installed a win7 OS on a SATA Seagate Barracude 7200.12 SATA and I'm trying to hook it up to my HP Notebook Compaq nx6310 laptop computer - not to work as a hard drive but just to access what's on it, so I can back it up.

The problem is my win xp, once having connected it, at first says "device not recognized", but I quickly worked around that problem by entering Device Manager and selecting "unknown device" and uninstalling it and then click "scan for hardware changes" and windows quickly detects that a new usb device has been connected and that the drivers are now installed and is ready to use... however nothing happens.

The "external" hard drive does not show up in "my computer" or under "system" and "manage drives" so it's not a hidden issue nor a drive letter issue and when I look at device manager it's still listed under USB Root as an "Unknown Device" and if clicki... Read more

Answer:Xp can't detect my "external" hard drive

8 more replies
Relevance 94.3%

Hello, All.
I connected my Maxtor harddrive to my Gateway desktop (Windows XP) today. The external is not recognized by the computer. I went all thru the forum, here (how i discovered you), and no help. USB is properly connected, and I tested another device. Maxtor is ON.

I went thru and found how to go to DISK MANAGEMENT, where you could rename the harddrive, but it won't let me "highligtht the capacity area". Help! My desktop is making funny noises and I want to back up some stuff before it explodes or aliens land inside it!!! ;-) Thank you, in advance.
 

Answer:"Invisible" External Hard Drive ;-P

Test the drive on another PC to verify operation.

What is the drive status in Disk Management?
 

1 more replies
Relevance 94.3%

... on November 14th 2008. It is a Western Digital 320 gigs External Hard drive in a " Compact, durable, metal case".

AUD$99-- which I thought was a bargain. It comes formatted to FAT 32. I had reason to re-format it over Christmas to NTFS. It was then I discovered that the Volume "Elements" was created on November 22nd, 2004.

So it was already 4 years old when I purchased it "new" about 6 weeks ago.

Out of curiousity, I read the paperwork that came with it.:-D

The receipt says if anything goes wrong, to contact the manufacturer in the first instance. WD doesn't get a mention. :cry

WD offer a 3 year Limited Warranty. Fortunately the Warranty period commences from the date of the Sales receipt (Nov14,2008) so I am covered I hope. Better keep the Sales Receipt in a safe place.

I mention this just to warn Aussies in particular, and anywhere else the 320gig WD Element External Hard drive model WD3200E035-00 is sold, that "new" may not be so "new" after all.

Bazza

PS: A couple of extra things to look out for. It runs hotter than I would expect (especially when I did a full format to NTFS).
There is no "ON" indicator LED at the front of the unit. It has a blue light at the rear that shows on or off, or in use, but that is a stupid place for it to be, IMO.
Also there are no supports to enable the user to stand it up in a vertical position. I guess WD expect you to use it in a horizontal pos... Read more

More replies
Relevance 92.66%

My external hard drive which ive been using for around 3-4 months has now started acting strange...either that or my computer.
When i plug in my external the safely remove thing never shows up.
I have tried the batch execution thing and it doesnt show up there either.
Its a Western Digital 250gb, and im running XP SP3 if that helps.
Its on optimize for quick removal but that doesnt stop it from writing stuff to the disk,
Example... when i take it out( i wait till the light stops flashing) a error comes up saying "Delayed Disk write" to hard disk 3 or something.
This hard drive has many of my important data that wont fit on my computer so... i cant really format it or anything.
USB flash drives are working correctly its just external hard drives.
Also my external in device manager is considered a disk drive not a removable drive..if that makes any difference

P.S if this post is in the wrong section of forums please dont delete it just move it.

***Update*** 5 hours later and now my flash drives are doing the same thing....So im absolutely stumped
 

Answer:External Hard drive "bug?"

You might take look through here for some things to try: See Troubleshoot: Windows Won't Recognize Your USB Hard Drive

In particular I'd start with
> Making sure you run Custom for Windows Updates. Make sure all hardware optional as well as the critical updates are installed
> Run the DriveCleanup Tool
> Try reinstalling USB controllers and motherboard chipset drivers
 

1 more replies
Relevance 92.66%

I'm thinking about purchasing an external hard drive with maybe 500GB of memory. I would put all my pictures, videos, and music there. I have a couple of questions though.

1. Which is a good brand to buy?

2. Will this help make my computer run faster since a big chunk of media will be on
this new hard drive? Or, is that up to my processor?

3. Is it easy to access an external hard drive? Or is a pain?

Any other helpful information/tips/drawbacks, etc. would be greatly appreciated
 

Answer:What is the best "External Hard drive" ?

16 more replies
Relevance 91.84%

HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error ( i am including the error meggage in attachment), howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

Answer:infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open

Hello and Welcome.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

---------------------------------------------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Relevance 91.84%

infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open
________________________________________
HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error, that is,this item "1002931234.vbs" that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut? Howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

dds


DDS (Ver_09-12-01.01) - NTFSx86
Run by Nadeem_Ahmad at 14:54:49.54 on Sat 03/13/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1975.1542 [GMT 8:00]

AV: Kaspersky Anti-Virus *On-access scanning disable... Read more

Answer:infected with "vbs", afte "Flash_Disinfector" all folders on hard drive don't open

Hello buct,

It will require more than 1 round to clean the system. Please stay with me until given the 'all clear' even if symptoms seem to abate.

Download ComboFix from one of these locations:

Link 1
Link 2


* IMPORTANT- Save ComboFix.exe to your Desktop

====================================================


Disable your AntiVirus and AntiSpyware applications as they will interfere with our tools and the removal.


====================================================


Double click on combofix.exe & follow the prompts.

As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.

Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.

**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.




Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:





Click on Yes,... Read more

10 more replies
Relevance 91.84%

I was copying (cut and paste) data from one external hard drive (a 250 GB IDE Maxtor in a Adaptec USB enclosure) to another external (a 400 GB IDE Samsung in a Roswill USB enclosure). During the move. During this move, my Thinkpad T43p encountered a NMI Parity error, to which I'm still unsure what caused it, though I think it may have been my Dock II screwing stuff up. I did memtest 10 times over and my memory passed, so I am assuming its my Dock II. ANYWAYS...

So the NMI Parity error was a blue screen, and I restarted the computer. After the restart I noticed the Maxtor external hard drive was missing from my drive list, and in disk management it show as an uninitialized disk.

Okay, no biggie, I've dealt with this before. I tried using GetDataBack for NTFS, that failed to recover. Also failed were Active Partition recovery, Data Doctor Recovery, File Recovery, Restorer 2000, TestDisk, and ZAR.

I'm guessing my Master File Table is trashed and I can't recover it.

Does anyone have any ideas?
 

Answer:"Hard Drive Catastrophic Failure" or "The night is darkest before dawn"

Zar should have recovered it (if the data is recoverable)
Also (you may already realize this now) in future Copy and paste

More recovery tools here
 

4 more replies
Relevance 91.84%

I just installed a new 60gb hard drive as a back up to put my movie files on,it installed fine and it works fine but i get "windows milenium emergancy boot" when i boot the system up .I don"t know if this error is serious but I do know that the system seems less stable in this boot mode..can someone please help? thanx
 

Answer:after installing new "hard drive" it starts with "windows emergency boot"

closing duplicate, view this thread
http://forums.techguy.org/t76279/s5b1a29d68c715c9a36d25291025adddb.html
 

1 more replies
Relevance 91.02%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Relevance 90.61%

My hard drive not showing in "my computer" or "Disk Management" but is showing under device manager. I got the hard drive from a friend and his dad had put a Password encryption on it. Any Ideas?

Answer:Hard drive not showing in "my computer" or "Disk Managment" help?

Have you installed the Windows 10 anniversary update, could be that giving problems i lost my 3 TB HD but luckily came back when i rebooted

1 more replies
Relevance 90.61%

I used a DriveWire - Universal Hard Drive Adapter (IDE / PATA / SATA to USB HDD Adapter) to hook up A 3.5" Hard Drive (Samsung model HD502HJ) to my desktop in an attempt to get my wife's files off her old desktop machine and merge them into mine. It all started off fine, the drive was recognized and I could see the files when I plugged in the USB cord. I started a NOD32 scan of the drive and a few minutes later a spark flew off my power strip and the fuse blew - looks like a letter opener shorted between two of the plugs. I think I killed the hard drive.

I replaced the power strip and started everything back up. The drive spins, but no longer is recognized by the computer when plugged in (no drive letter for it). Under Disk Management, I see the disk listed as "unknown" and "not initialized". Originally I had the option to right click and select "Initialize", and I was given option to use two partitiion styles (MBR or GPT).. I tried both to no avail, and get the "device is not ready" message.

I can right click select "Offline", and get the same message. right-click "Properties" say the device is working properly.

I plugged in another drive on the hard drive adapter and it works (so it's not the vault of the adapter). I try the same setup on my laptop and get the same results.

So I'm pretty sure I killed the drive. I just care about getting pictures and documents off it. Any advise? I know t... Read more

Answer:Hard Drive "Not Initialized", "device is not ready",won't recognize

If you have killed the drive, there isn't very much you do about it. Even experts cannot sometimes recover anything, and it's just a wast of money.

9 more replies
Relevance 90.61%

My hard drive not showing in "my computer" or "Disk Management" but is showing under device manager. I got the hard drive from a friend and his dad had put a Password encryption on it. Any Ideas?

More replies
Relevance 88.97%

A friend of mine gave me his external hard drive with the hopes that I might be able to fix it.

It's a new external Western Digital that is 2TB in size and he purchased it within the last 2 or 3 months. I don't know what he did, but it wouldn't surprise me if he pulled the USB cord without properly unmounting the drive and something with his filesystem became corrupted. I don't know how to repair this.

The drive will show you a drive letter when you attach it to Windows, and using a partition manager (in Linux) shows the drive to contain an "unknown" partition type. In Windows, running "chkdsk e: /x /r" returns an error that says "chkdsk is not available for RAW drives".

Anyone know of a reliable (and preferably free) utility that might be able to repair this kind of problem quickly?
 

Answer:External hard drive NTFS partition missing; chkdsk says it's a "RAW" partition now

Is this a data recovery operation? Should be able to just format again if not.

Otherwise testdisk (http://www.cgsecurity.org/wiki/TestDisk) might be useful to recover the partition info.
 

2 more replies
Relevance 88.56%

I am for the first time getting an error when I try to import an Excel file from the "External Data" tab in Access 2007-2010.
A box pops up from the "import Spreadsheet Wizard that says "There is no object in this Control"




When I click "OK" it tries to go to the import panel that is all blank





When I click "Next" here is what I get:




I have used this process for the past 7 years and never had any problem.

Does anyone have any suggestions?!?!
 

More replies
Relevance 88.56%

I bought a 1 TB Fukato external HDD that I couldn't get to work on my computer.It showed an icon on the desktop, but in the file manager right clicking it says "loading" forever and ever...I Googled the product and saw only bad reviews so exchanged it at the store for a 500 GB Trekstor.The same happens here.I must add that I have messed around a bit with chmod and chown to try and get permissions (are all set to root) for me, but don't remember exactly what I did  I'm not too familiar yet with Linux, so I hope someone can explain a simple solution, thanks(using Sabayon Linux, based on Gentoo)EDIT: solved simply by login as root... it did take two of us to figure that out after 4 hours 

More replies
Relevance 87.74%

Hi Everyone,

I'm hoping to get some help. I had a power outage while my WD Elements 1.5 TB Hard drive was on. I wasn't accessing it but apparently that was enough.

I had a lot of important data on it but losing hope after unsuccessful attempts to use PhotoRec to get items off it.

It doesn't show as accessible in MyComputer but is detected. I've included what it shows under the "Manage" view of the drive.

I've also tried MiniTool Partition but it doesn't seem to be able to fix the partition. I've also tried Partition Bad Disk and it just shows the whole 1.5 TB drive as one bad block. It won't let me fix it either.

Does anyone have any other bits of advice? I'm at a loss as what to do. It seems the data is not recoverable. I can't figure out how to get it to show or even how to use it again.

Please see attachments.

I'm grateful for any ideas/help please. Thank you.

Answer:External Hard Drive failure. "Bad disk" after power failure

Hello dime5150. Welcome to the forum

In PW, did you try "Rebuild MBR"?

9 more replies
Relevance 86.92%

Build a computer for a customer with the following specifications :-
P4 2.8GHZ 533MHZ FSB 1M ATC 478PIN .13U (PRESCOTT)_
ASROCK GE Pro-M2/M/ASR Motherboard
512Mb DDR Ram
Samsung 80 Gb IDE Hard drive @ 7200 RPM
BenQ 16x DVD
Pioneer DVD-RW 107
5 1/4 Bay 6-in-1 Card Reader connected via USB
PS/2 Keyboard
P/S 2 Mouse
Panasonic 1.44Mb
Case with 300 Watt PSU, FP/USB FP/USB
Windows XP Pro

I assembled the computer completely. Installed Windows Xp Pro, plus additional software. Everything running fine. But one problem.

The 5 1/4 Bay 6-in-1 Card Reader connected via USB is taking up the drive letters of C, D, E, F, G, H. Therefore it moved the primary master hard drive down to I.

So if you open up MY COMPUTER, you see :-
Drive A : Floppy
Drive C : 6 in 1 Card Reader
Drive D : 6 in 1 Card Reader
Drive E : 6 in 1 Card Reader
Drive F : 6 in 1 Card Reader
Drive G : 6 in 1 Card Reader
Drive H : 6 in 1 Card Reader
Drive I : Samsung 80Gb Hard Drive
Drive J : BenQ 16DVD Rom
Drive K : Pioneer DVD-RW 107

I need to move the Samsung 80Gb Hard Drive from Drive I to Drive C.

How do I go about doing that? (preferably with out having to format the hard drive and reinstalling the OS.

Please help.

Answer:[WIN XP] Primary Hard Drive Letter from "I" to "C"

its not possible at least to my knowledge to change the letter of the primary drive you can try, go to start-control panel-Administrative Tools-Computer Managment-Disk Managment- Right click the hdd and hit change drive letter.

4 more replies
Relevance 86.92%

hard drive seen by "device manager" but not by "my computer". how is it possible? and it says that the "device is working properly". I cannot use this second driver because is not seen by "My computer"
 

Answer:hard drive seen by "device man." but not by "my computer"

Device manager sees the raw hardware, My Computer only sees partitioned and formatted hard discs. You need to go into disk management to partition/format/assign a drive letter
 

2 more replies
Relevance 86.1%

So I've been up for hours this morning, fighting with a brand new Seagate 500Gb Extension 2.5" portable hard drive.
While transferring 120Gb of information from the drive to an internal drive, it often stops copying/moving halfway through. It seems to happen mostly on large (1Gb+ files), but has also happened on smaller 200Mb files.
When it stops copying/moving, the destination drive is accessible, but if I try to access the files on the 2.5" it freezes and gives me the not responding message. If instead of accessing the files however, I click on my computer in the same window, the copying/moving resumes!

Prior to discovering this, I had been opening task manager and attempting unsuccessfully to kill the processes, and then explorer, which would close but not restart itself. I then had to open powershell and restart explorer from there.

Unplugging the 2.5" would also stop the hung copy process, and I'm hoping it hasn't corrupted any of my files! (only tried it twice).

The Seagate came default formatted in NTFS, and I'm using W7 64bit. I also have USB suspend disabled.

Any ideas?

Answer:2.5" External drive "falls asleep"?!?!

i found this program today im using to see how my drives are doing HDDScan
and it has lots of features here are some key things (oh and its free)

Reading and analyzing identity information from ATA/SATA/USB/FireWire/SCSI HDD.
Changing AAM, APM, PM parameters on ATA/SATA/USB/FireWire HDD.
Reporting defect information on SCSI HDD.
Spindle start/stop function on ATA/SATA/USB/FireWire/SCSI HDD.
Reports can be saved in MHT format.
Reports can be printed.
Skins support.
Command line support.
SSD SMART and Identity reports

the feature i found good is in the screen shot automatic acoustic management you may find some useful info for yourself?

3 more replies
Relevance 86.1%

Greeting everyone,

I ran into a problem again, it's my external 2TB hard drive. Yesterday it worked fine. Now, I connect my hard drive, then I go to "My Computer", the window is blank, it's loading... for a while, most of the time Windows becomes unresponsive, I'm starting to get a "little" frustrated. All of my programs become unresponsive and I have to end them. I received an error earlier, I'll try to recreate it.

I cannot access my external hard drive. It's a "Seagate Free Agent." The data on it is crucial, I cannot lose any of it, 1TB of data!

If you need more things about this situation, please ask.

Answer:External hardrive not "loading".

Hello there, Skul!

Are you connecting the HDD to the same USB port as always?

Have you tried accessing the HDD in Safe Mode? There's no need to panic, i know your data is important and let's try to solve the issue

9 more replies
Relevance 85.69%

It's a mole hill of a problem, but it is a bit annoying to have to click on my principal drive ("C") every time I'm doing a "save". I have enclosed an excerpt of a screen shot of my "save as" window to display how the default drive being automatically selected is the "D" drive rather than the "C" drive that I use primarily. To be honest, I don't know whether this can be corrected by a software change, or whether it's the way the two hard drives are connected in my computer.

I'd appreciate it if anyone has a suggestion to offer if there is a way to make my "C" drive the default selection when I attempt to do a save function. Thanks
 

Answer:Solved: How do I change default hard drive when doing a "Save as""?

16 more replies
Relevance 84.87%

I just purchased a 2.5" enclosure that connects to the computer via USB and a 2.5" 60 GB external Hard drive for it. I am running Windows XP Pro so the device should install automatically. I am getting the little icon in the taskbar stating that the device is present and when I checked the status of the hardware in device manager, the computer lists the device and says the device is working properly. The problem is, I am not getting an icon in My Computer am because of this, I cannot access the drive. What am I doing wrong?
 

Answer:2.5" External Hard Drive

You need to go to Disk Management, Initiliaze, Partition, and Format the drive.

http://support.microsoft.com/kb/309000/
 

2 more replies
Relevance 84.87%

I just set up a 3.5" usb 2 external hard drive enclosure with a harddrive in it and connected everything and the green light is on on the external case but I can't find anything in My Computer. How do I use this thing? I have Windows XP and this new hardware shows up in Device Manager, but not in MyComputer.
 

Answer:3.5" usb 2 external hard drive

start > right-click my computer > properties > what service pack version does it say?
 

7 more replies
Relevance 84.46%

Hi, just as the question title says, I am having a RunDLL error with the windows dll "streamci.dll".

I am getting this error while trying to install my Audio Drivers on my newly set up XP OS.

During the installation of XP, a couple of files were not copied properly.
because the CD was scratched up pretty badly, but I had no other copy of the CD, I had to just skip and hope windows installed, and was usable...

Are there any tools, that can scan your computer for missing windows DLL's and re-install them?
I have already tried downloading the file streamci.dll from the internet and installing it with

Code:
regsvr32 streamci.dll
in the command line, but I get the following error:
RegSvr32

"Streamci.dll was loaded, but the DllRegisterServer entry point was not found.
This file can not be registered."Click to expand...

Would downloading and re-installing SP2 from microsoft, possibly fix this problem?

Any Ideas?
 

Answer:RUNDLL ~ "Error Loading Streamci" ~ "The Specified module could not be found"

What version of XP Pro did you install with that CD?

XP Pro original

XP Pro SP1

XP Pro SP2

Have you downloaded and installed the SP3 upgrade?

-----------------------------------------------------------------
 

1 more replies
Relevance 84.05%

I am looking to purchase a 2.5" external hard drive enclosure. I have been reading a little about them and most of what I hear is that there powered through the USB port. They say most of them come with a Y to be able to plug two usb ports into the back of your laptop to provide ample power for the drive. My problem is that I only have 1 usb port on my laptop. I've read in a couple places were people say that it just isnt enough power and there drive keeps getting dismonted becuase of it. Is there a way around this? If I used a Y splitter but used a pass through usb to kind of daisy chain them together would that provide enough power or should they actually be plugged into 2 seperate USB ports? Can you recommend any models for me?

Thanks,
 

Answer:2.5" external hard drive enclosures

7 more replies
Relevance 84.05%

I need this problem solved because i need some few work moved to Vista computer... but it's 10GB and it's too big...

I have several HDD... I need to reduce some space in laptop
 

Answer:How can i make my hard drive 3.5" to external HDD

you can try to get an Enclosure for the Drive..

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1800603&Sku=ULT33051
 

2 more replies
Relevance 84.05%

hi,

recently my laptop decided to stop working , so i thought the first thing i need to do is get all of the data off the hard-drive. so i bought a external enclosure for it and installed it and everything.

plugged it into a windows XP system and it went through the whole plug n play thing and it started then.

now when i plug the drive in the action light comes on and totally crashes windows. eventually it sorts its self out and gives me the 3 partitions my notebook drive is in, i can access two of them but the problem is that all of the files i need are on the third unreachable partition! it totally freezes after right or left clicking on it or accessing and software to do with the hard drive.

i got a error recently saying L: drive needs formatting do you want to do it now, but i dont want to format it as i want the data from it!

any help would be much appreciated and if you are not fully sure what im on about i will try to explain better

regards

Andrew K
4ndr3wk
 

Answer:Solved: external 2.5" hard drive

16 more replies
Relevance 84.05%

I just got an external 2.5" hard drive and it comes with a usb cable where one end has two usb connectors. i'm thinking the extra connector is for additional power, but is it required or recommend? it seems to work fine off of just one connector which is good because it is going in my car, but i just want to make sure.

Answer:Powering External USB 2.5" Hard Drive

well just answered my question. drive will power up fully in the car with only one usb. now i need to find a way to take 12v to usb.

2 more replies
Relevance 83.64%

I'm getting a lot of "Check Disk for Errors" and "this hard drive needs to be formatted before it can be used" error messages when plugging my external usb hard drives into my home pc which uses windows 7. I don't get any of these messages when I plug the same hard drives in at any of a number of pcs at work which use windows xp. Any ideas on why this is happening only with windows 7? I'm also getting a lot of disconnects and reconnects on these devices but again only on windows 7.

Thanks in advance for any advice you can give...

DR

Answer:"Check Disk for Errors" & "hard drive needs to be formatted" errors

Welcome

I would do the ck disk. If you still get the notices, I would be concerned about HD failure. Take the HD diagnosis.
http://www.carrona.org/hddiag.html

1 more replies
Relevance 83.23%

For some reason about 75% of the time when I have an external hard drive plugged in to either my laptop or desktop computer (both running Windows XP Professional SP3) it won?t let me safely remove the drive when I?m done with it; the error message I get on both computers when trying to remove the drive using ?Safely Remove Hardware? is: The device ?Generic volume? cannot be stopped because a program is still accessing it. Except no programs are accessing it, not even Explorer. I?ll then have to shut the entire computer off in order to remove the drive since nothing else seems to work.

I did try the steps listed at this site but I still got the same ?Generic volume? error message after closing the two threads that were accessing the external drive and Process Explorer didn?t show anything at all as accessing it once I had closed the threads that were there. If it helps, the two threads were apparently the same thing at the same location: F:\System Volume Information\EfaData\SYMEFA.DB

I googled that file/file path but didn?t really find anything that related to my problem. So could anyone here help me out? Like I said, this happens on both my laptop and my desktop computers which aren?t connected to each other in any way so in addition to wondering why I?m getting this message to begin with I?m wondering why I?m getting it on both machines.
Any info or advice would be much appreciated.

Answer:Unable to "safely remove" external hard drives on either of my computers

Program Accessing it message is usually a residual effect of a files cache still running in memory. Windows should have cleared it but in many cases it does not go away. If your right click the Safely Remove Icon in the System Tray, and then Remove the drive, if you get that message, close it and hit it again. 9 times out of 10 it will let you Safely Remove it then. If not, wait a few minutes and try it again, if it refuses, then just unplug it. The only danger is that it may not get recognized if the drive was using a file at the time, but this is rare.

5 more replies
Relevance 83.23%

I have several external HDD docks that I use for backup and PC repair (Thermaltake and Rosewill). The docks work fine, but I am having problems lately with any HDD I place in the docks. The behavior I will describe occurs with ANY HDD in ANY dock; thus, I suspect something related to Windows (8.1 Pro - properly updated and clean of malware).

The Issue: Whenever I place a HDD (usually a 2 or 4 TB Western DIgital) in the dock, the activity lights ramp up to full speed. Checking Task Manager reveals that the HDD in question is processing read activity at 80% - 100% rate. This will go on for at least 30 minutes, EACH time I place the HDD in the dock. Checking the properties of the drives, I have NOT enabled indexing of any of these drives. In addition, I long ago disabled Windows Search and Superfetch services. In Task Manager (Performance tab), it is clear the drives are beng read but not written to, but no where can I identify what process is responsible for this. This is my concern, Dude - what is causing this constant (near 100%) read activity? All my drives are regulary scanned for malware (all are clean) and CrystalDiskInfo reports all drives as "GOOD".

If anyone can suggest a solution, I will be very grateful. Thanking you in advance. Svenno

More replies
Relevance 83.23%

Ok guys.. I screwed up big time... I was about to create a bootable flash drive with a utility called HPflash and right the moment I pressed the start button I realized that the selected drive wasnt my flash drive.. but my external hard disk with 400 Gigs of Data! I dont know about you guys.. but I had tons of pictures and videos.. (my wedding video too!) And I am going nuts now.. can anyone please give me some hope and tell me I can recover all my files? Do I need to use one of the un-delete software out there? When I click on the hard disk it states that it needs to be formatted.. so apparently it hasnt.. so what happened to it? Can I undo what I did very quickly? thanks!
 

Answer:Solved: Recover external hard disk that "needs to be formatted"

12 more replies
Relevance 83.23%

Hello,

I purchased an acomdata 509 external hard drive enclosure a couple days ago.

I connected the drive to my computer via a usb cord. It isn't recongnizing the enclosure/drive at all. There is nothing in my device manager etc..

I have attempted to install the driver that came with the enclosure, but was given a message that said it didn't need to install the driver as it was already compatible.

This hard drive had some issues (I don't recall now what they were), which is why I installed a new hard drive on my pc. I was hoping that I might be able to draw some information from the external drive and save to my new drive. (I am specifically looking for photo's/movies and some excel spreadsheets.)

Thanks,
DS
 

Answer:Acomdata 3.5" external hard drive enclosure

Welcome to MajorGeeks! So do I have this right, you have a problem hard drive that you put in an enclosure and it is not seen by the 'puter? Have you tried the diagnostic stuff that most hard drive companies have? If you can post what kind of hard drive, we can find a diagnostic program for you.

E
 

4 more replies
Relevance 83.23%

Hello.  I broke my Acer laptop screen, but salvaged the 2.5" SATA 320 GB Hard drive.  I wanted to salvage my files from the laptop HD, and also continue using it as an external hard drive.  I bought a case from amazon.com, with hopes that this would do the trick.  My computer recognizes the drive, sometimes.  However, I can't read any files.  I use Windows 7 Home Premium and have an eMachine.  Additional info available if needed.

Answer:Converting 2.5" SATA HD into a external hard drive

Take Ownership...Hope this helps.

2 more replies
Relevance 83.23%

So I want to buy the following item from eBay.
It says that the max size it supports is 300GB.
My hard-drive is 320GB

Will:
a) the external hard-drive CASE recognize the HDD as 300GB and function normally?
or-
b) the external hard-drive CASE not recognise the HDD at all due to it being too big.

Thanks for your speedy help!
 

Answer:Question about 2.5" external hard drive case

A 320GB hard drive actually works out to be about 298GB. I believe the only way to know if the drive will work is to try it.
 

3 more replies
Relevance 83.23%

I Just installed my system with Windows XP Pro SP3. But I have a very strange problem.

I have installed hundreds of computers before but have never come accross this, I have 3 SATA drives in RAID and another 1TB drive as a backup souce. Now when I installed I selected the RAID array as the installation destination, and all went fine. But now that I am in windows this is what I see:



As can be seen, my 1TB HD has been set as the C:\ root and the RAID array with windows on as D:\ When installing programs they are directed to D:\

I think this has something to do with the MBR but Ii do not want to go and remove/remake it without been sure first, does anybody know how to sort this mess out please without a reinstall?

Thanks

Answer:One hard drive is set as "Boot and the other as "System"...Help

You know i'm not sure. I don't think that you can change the drive letter for the system partition

6 more replies
Relevance 82.82%

"Appcrash", and "General Fault" when loading various warez. I have been getting these often. Some adobe software. Older games like Diablo II. The list goes on and on, I just don't remember which software.

More replies
Relevance 82.82%

Hello there, when the desktop loads up, I get this strange message:

"Open With:

Choose the program you want to use to open this file:

File: Media"



Does anyone have any ideas why?

I have a screenshot of the programs which run at startup:



I have a HiJackThis log if it helps:


Code:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 08:28:24, on 29/05/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Logitech\SetPointP\SetPoint.exe
C:\Program Files\VIA\VIAudioi\VDeck\VDeck.exe
C:\Program Files\COMODO\COMODO Internet Security\cfp.exe
C:\Program Files\Acronis\OnlineBackupStandalone\TrueImageMonitor.exe
C:\Program Files\Acronis\TrueImageHome\TrueImageMonitor.exe
C:\Program Files\Common Files\Acronis\Schedule2\schedhlp.exe
C:\Program Files\Common Files\LogiShrd\KHAL3\KHALMNPR.EXE
C:\Program Files\HP\HP Software Update\hpwuschd2.exe
C:\Windows\system32\rundll32.exe
C:\Users\Media Centre\AppData\Local\Google\Update\1.3.21.57\GoogleCrashHandler.exe
C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Siber Systems\AI RoboForm\RoboTaskBarIcon.exe
C:\Program Files\Common Files\Microsoft Shared\Ink\InputPersonalization.exe
C:\Windows\system32\mspaint.exe
C:\Program Files\Mozilla Firefox\plugin-containe... Read more

Answer:Windows 7 32 bit, when loading "Open With: ?" "File: Media" comes up

There must be an error with one of the startup settings.
Please use Autoruns by Sysinternals/Microsoft to see more info about Programs loading with your system.
Pay attention to Logon tab.

Looks like for some reason it is trying to load a folder as a file. "Media" is a part of a folder path.
Try to uncheck all values,where Media is a part of the path.

Also, please check for viruses with Kaspersky Virus Removal Tool Download
or Malwarebytes : Malwarebytes Anti-Malware is a free download that removes viruses and malware from your computer

4 more replies
Relevance 82.82%

One small niggle I have is the 6 external HDDs I have, which are connected to docks, constantly take about 5 seconds to come to life when needed, I suddenly hear them whir up when I click on them or save to them. I have turned off "sleep" in Power settings, but this doesn't seem to help. I saw some software that can keep drives alive by writing a small text file to them every few minutes. Can someone tell me if there are any negatives to keeping them awake 24/7 ? My PC is left on all the time. Will they overheat, or is that only when they are having a lot of use ? Is it no different to my internal drives being on "0" in the power settings ?

Thanks !

Answer:Is it "safe" to keep external hard drives awake 24/7 ?

It should be no problem leaving them run all the time. The only time a hard drive generates heat is when randomly seeking for long periods of time. However I personally have have about 8 external drives all in enclosures. I always like to have a fan. I do not leave them run 24/7, since they are primarily used for backups. But when they are in use, I'm pumping large amounts of data in the shortest period of time and they do get warm in that environment.

more replies
Relevance 82.82%

Hi
I have recently updated to the creator version
My files end up in unintended destinations. When I click in the documents tab in the sidebar of the documents screen, it takes me to a ?Documents? folder that appears in ?One Drive? group. Any files that I send from my desktop end up there
Those files are also shown when I open the first ?Documents? folder that appears in the ?Quick Access? group. I have similar problems with ?Pictures? folders
I have attached screen shots that I hope will explain. I want all my files of any description to end up in the ?Documents? folder contained in the ?This PC? group. Can anyone help please?
Incidentally, I don?t understand the purpose of ?One Drive?, and don?t believe that I will have a use for it. Can I remove/disable it?

More replies
Relevance 82.41%

anytime i try loading from a cd or downloaded software it says incorrect drive E:,  how can i fix this?  on winxp

Answer:loading software and get "incorrect drive E:"

What says "incorrect drive e:"? Please state your question so that even I can understand it.

3 more replies
Relevance 82.41%

With EaseUS Backup Tool, I've cloned these two partitions ("System Reserved" and "C") to same-sized partitions on a external HDD ("X" and "Y"). Picture tells it concisely:
How to make drives "X" and "Y" boot-able?

In "Disk Management", I've noticed these partition labels missing:"X" (or "System Reserved") is missing System label,
"Y" (or "OS") is missing Boot, Page File and Crash Dump labels

Thank you!

Answer:Both "System reserved" and "C" partition cloned to external HDD: boot?

You cannot boot Win7 on external HD, unless it is connected via eSATA.

9 more replies
Relevance 82%

My external hard drives keep "disappearing" from "This PC." 
Everything worked fine in Windows 7 64bit and Windows 8 Pro. 
As soon as I upgraded to Windows 8.1 Pro, the problem started.
Drives are present and working for approximately 10-15 minutes, then they "disappear."
System must be restarted or sometimes removing and reinserting the USB cable will bring back drives.

From my searches, apparently this is a widespread issue.

I have a Mediasonic ProBox HF2-SU3S2 4-bay JBOD enclosure with four HD's in it connected to my laptop via USB 3. 
The laptop is an ASUS g74SX. 
The USB controller is Fresco Logic xHCI FL1000. 
All drivers and firmware for every bit of hardware is most recent. 
I have tried drivers for all hardware both from the manufacturer, as well as Microsoft.
Power management for all devices, USB sleep, etc. have been turned off.
Hard drives have been checked for S.M.A.R.T. issues, as well as any other issues - no problems.
USB cables have been changed.

USB thumb drives work fine.
Uspeed Superspeed HD dock on USB 3 works fine.

I, as well as other ProBox owners, have talked with Mediasonic who essentially says the problem is not their hardware.
Mediasonic points to people using other USB devices as having the same dropout issues. 
Indeed, upon checking, it appears that others with different systems are experiencing the issue.

The common denominator is, people did not have th... Read more

Answer:USB 3 external hard drives keep "disappearing"

Actually, it has nothing to do with drivers, nor is it your hard drive's fault. It's actually a Microsoft issue, although I'm not sure anybody has stated it as such. Anyway, the problem does have to do with how Windows 8.1 deals with power management of
USB. It took weeks to uncover the solution, but here it is. Also, this solution has been confirmed to work for many people with many different devices from different manufacturers. Cheers!
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-drive-disappears-or-file-transfers-stop-unexpectedly-r-a-post-title.aspx?CommentPosted=true#commentmessage

10 more replies
Relevance 82%

I am trying to help an acquaintance select an external (possibly portable) hard drive to be used for backup. This person is a very inexperienced computer user, so all he really needs is a USB interface.

After talking with him, and explaining the various backup options, he would like to use an image backup solution (and I think that is appropriate for his situation).

There are inexpensive image backup software applications available (such as Acronis True Image, which I have successfully used).

What I have discovered, however, is that (perhaps) all consumer external hard drives are now sold with some sort of software (including, in some cases, some kind of backup software) bundled (even pre-loaded on the drive) with the drive. I have browsed the Seagate and Western Digital products, and no current products (as far as I can tell) are sold without this software.

So . . . if he buys one of these "bundled" hard drives, can the pre-loaded software be removed? Can it be deleted or does it have to be uninstalled? If it is removed, does that cause any problems with using the drive?

If it can't (or shouldn't be) removed, are there any problems with using a separate backup application (such as True Image)?

I searched this forum, but did not find anything relevant.
 

Answer:"Unbundled" external hard drives?

I would recommend purchasing an External case and a HDD separately and building the External Drive that way, Can be less expensive and you set it up yourself without the bundled software that the Big Boys Externals come with. Have a browse through these for enclosures http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92&name=External-Enclosures
 

1 more replies
Relevance 82%

"0x80070057" error. I was simply trying to copy a folder or group of files to another hard drive.
Hard drive to Hard drive, no SSD or External was involved.

Any solutions to this issue?

It literally refuses the copying to be performed ...

I'm trying to copy folders/files from a Seagate SATA II 320 GB Hard Drive to a newer Western Digital SATA II 1 TB Hard Drive.
thanks

Answer:"0x80070057" Error copying files from hard drive to hard drive??

  
Quote: Originally Posted by axelrose


"0x80070057" error. I was simply trying to copy a folder or group of files to another hard drive.
Hard drive to Hard drive, no SSD or External was involved.

Any solutions to this issue?

It literally refuses the copying to be performed ...

I'm trying to copy folders/files from a Seagate SATA II 320 GB Hard Drive to a newer Western Digital SATA II 1 TB Hard Drive.
thanks



That error sometimes refers to a read write problem. That could be caused by a controller, too little ram, or a busy cpu.

How bis are the copies?

What does it say in event viewer about it?

There are several ways to find what the problem is. The best is to go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.

When you find them please note the event ID, and the source codes and tell us what they are.

Let us know if you need help with any of this.

Ken

2 more replies