Computer Support Forum

The driver \Driver\WUDFRd failed to load

Question: The driver \Driver\WUDFRd failed to load

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

Relevance 100%
Preferred Solution: The driver \Driver\WUDFRd failed to load

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: The driver \Driver\WUDFRd failed to load

you ever resolve this?

1 more replies
Relevance 91.64%

I saw this while debugging my Y50-70 (windows 8.1 x64) which had shut down issues Need expert advise on which lenovo driver is this "lenovo HID"

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000

Got the same problem...Lenovo Z50-70Win 8.1 x64 The device sometimes doesnt correctly shut down.Display = black and LEDs are on. Need to turn it off "hardcore" via pushing the power button ca. 10 seconds. What the hel is going on? Windows says: The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000I installed all Lenovo drivers.

3 more replies
Relevance 91.64%

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

Answer:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

1 more replies
Relevance 91.64%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Relevance 91.64%

I am seeing several of these Warnings in the Event Viewer, Windows System logs. These are Event ID 219, Source Kernel-PnP.

That said, I am not experiencing any crashes, freezes, BSODs, and everything on my PC seems to be functional. So perhaps I can safely ignore these warnings, but I prefer to get to the bottom of something in case it will lead to problems in the future.

I have done some online research on this event, and none of the suggested fixes seem applicable to me. I have been vigilant in keeping all drivers on my machine up to date. I've checked, and there don't seem to be any newer drivers available for any of my hardware. I also have the Windows Driver Foundation - User-mode Driver Framework service set to "automatic" startup.

The details of this event are below.

Any suggested action to remedy my problem? Thanks!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

- <System>

<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>219</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>212</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2017-01-01T19:23:45.837466800Z" />
<EventRecordID>51641</EventRecordID>
<Cor... Read more

Answer:The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000?

Go to Start/Search and type devmgmt.msc, right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? If so, these devices need drivers installed. Usually your video card driver.
https://social.technet.microsoft.com...ernel-pnp.aspx

3 more replies
Relevance 91.64%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

Answer:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

2 more replies
Relevance 91.06%

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

Answer:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

9 more replies
Relevance 91.06%

My PC started BSOD-ing a few days ago and now does it every few hours.

It starts with this error:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then moves on to:

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_Multi&Prod_Flash_Reader&Rev_1.00#058F63666471&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}.

Then:
Installing printer driver Microsoft XPS Document Writer failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.

Then:

The print spooler failed to regenerate the printer driver information for driver Microsoft XPS Document Writer for environment Windows x64. Win32 system error code 1797 (0x705). This can occur after an operating system upgrade or because of data loss on the hard drive.

Finally:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80c5d0d15b0, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: d35c98fc-b1e6-4003-bed9-f7cdbca575e2.

This started happening a few days ago, right after a new update from windows:

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3201845)

Answer:BSOD - The driver \Driver\WudfRd failed to load for the device SWD\WPD

Please check MSI for BIOS updates and update every driver that is possible from MSI.

3 more replies
Relevance 91.06%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

Answer:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Relevance 90.19%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

Answer:The driver \Driver\WudfRd failed to load for the device (NB. FOR USB)

See if this helps
> Type Services into the search box. Run the Services desktop app
> (You may need to click the column header to sort services by their name )
> Right click on Windows Driver Foundation.
> Select Properties and set Startup Type to Automatic
> Reboot

11 more replies
Relevance 90.19%

Hi,

I'm been having issues a looong time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.

Latest error which occuring at least once per day:
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.

This happens very random and I'm really lost here.

Thanks! / Micke

Answer:The driver \Driver\WudfRd failed to load for the device

Hi Frostflake,

Welcome to the 10forums.

Please uninstall Avast and use Windows Defender as alternative.
Avast - Uninstall Completely - Windows 7 Help Forums


Code:
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys

ffffd000`22a74e98 fffff801`8ed3493cUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5493c

8 more replies
Relevance 90.19%

At Windows 10 startup this Warning appears in my Event Log as Event ID: 219.

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{a1c931b2-3b00-11e5-9c14-806e6f6e6963}#0000000008100000.

I know why this happens. The device in the message is an internal SATA AHCI hard drive. All AHCI drives, even internal ones, are considered removal or hot swapable. It even causes the safely remove icon to appear sort of like it was a USB drive. It happened on Windows 8.x. Don't remember if it happened on Windows 7. I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive.

The fix to get rid of the message in W8 was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem. However, on Windows 10 this method does not work.

I can't disable the Service as it's needed for other devices. Just wondering if anyone found a nice clean way to get rid of the warning message like in W8?

Answer:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

4 more replies
Relevance 90.19%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 90.19%

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

Answer:The driver \Driver\WudfRd failed to load for the device .......

Disabling hard disk hibernation solved the problem for me.

Just go to Power options -> Advanced Settings -> Hard Disk -> Turn off hard disk after -> Never

Hope it helps

Gal

9 more replies
Relevance 90.19%

*** Problem has reappeared, so this is NOT a solution ****
It worked for 5 reboots, so strange it reappeared

Been searching for days to find a solution for this problem (including fresh installs of Windows 10 etc), and today accidentally found it ... for my Asus Maximus V111 Formula at least, but it may also work on other motherboards

In BIOS, ensure that the XHCI Hand-Off is set to ENABLED (default is disabled)

I changed this, and now I can boot the system with USB devices inserted, and not get any Kernal-PnP warnings

Hope this helps somebody else

mfG
Dave

More replies
Relevance 90.19%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

More replies
Relevance 90.19%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

Answer:The driver \Driver\WUDFRd failed to load for the device

anyone?

1 more replies
Relevance 87%

I just did a clean install of my X220 with Windows 7 Pro 64-bit using the latest X220 Lenovo drivers.I have a X220 with the fingerprint reader. Any time the laptop boots up I see this event in the event log:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E.The device USB\VID_147E corresponds to the fingerprint reader (I checked this in the device manager).Can someone help with this? Thanks!   

Answer:The driver WUDFRd failed to load...

i have similar "issue" with my W520: Log Name:      SystemSource:        Microsoft-Windows-DriverFrameworks-UserModeDate:          29. 7. 2011 0:49:19Event ID:      10114Task Category: Startup of the UMDF reflectorLevel:         InformationKeywords:      (2)User:          SYSTEMComputer:      ThinkPadDescription:The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.    Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          29. 7. 2011 0:49:19Event ID:      219Task Category: (212)Level:         WarningKeywords:     User:          SYSTEMComputer:      ThinkPadDescription:The driver \Driver\WUDFRd failed to load for the device USB\VID_147E&PID_2016\6&2e78673a&0&3.  in my case it is related to external USB hard drive, which is displayed... Read more

9 more replies
Relevance 87%

 I'm getting a warning in the event log upon startup.  Windows 8.1 Pro.   This is a IdeaCenter B750 AIO. I have no idea what driver this is so I need help fixing this error.  What is WUDFRd ?  All the information I can locate refers users to their OEM for a driver update..  Some mention a fingerprint reader but this system doesn't have one of those. ThanksBryan -------------------------------------------------- Log Name:      SystemSource:        Microsoft-Windows-Kernel-PnPDate:          2/10/2015 11:24:03 AMEvent ID:      219Task Category: (212)Level:         WarningKeywords:     User:          MYPCDescription:The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />    <EventID>219</EventID>    <Version>0</Version>    <Level>3</Level>    <Task>212</Task>    <Opcode>0</Opcode>    <Keywords>0x800... Read more

Answer:The driver WUDFRd failed to load...

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

1 more replies
Relevance 86.13%

I tried the "fix" suggested in another thread (change the service "Windows Driver Foundation" to Automatic from Manual) and it works for awhile. However, I have made the change several times since the Event Warning comes back after a few days. Anybody got a way to make the "Automatic" stick. Windows 8.1 seems to have a need make it "Manual"!

Answer:Driver WUDFRd failed to load - Event ID 219

It should be set to manual w/trigger so that is not the solution to your issue (whatever that is):

3 more replies
Relevance 85.55%

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

More replies
Relevance 85.26%

For the past couple of days i have been having a problem where my computer just shuts down on its own and then turns back on again. It mostly happens when im launching or playing a game but a couple of times i was just on the desktop and it restarted. I have checked the event logs and it keeps saying this:

The driver \Driver\WudfRd failed to load for the device SWD\SensorsAndLocationEnum\LPSensorSWDevice.

I have searched all over the internet for the past couple of days and have found multiple answers (all of which didn't work). Some say its the psu and others say its the gpu. I personally think it was the windows update that i did three days ago because that was the day it started but i have yet to see anything online about a windows update causing this. I have already updated the graphics drivers and chipset drivers but it didn't change anything. Can someone just tell me whats going on because is just built this pc about 6 months ago and nothing like this has ever happened.
Specs:
MSI Z87 GD65 Gaming Motherboard
Intel Core i7 4770K
Nvidia Geforce GTX 780TI
16GB DDR3 RAM 1333MHZ
680W PSU (Not sure what the brand is. I think it might be kentek or something)

More replies
Relevance 83.23%

I get the following Warning, Event ID 219 in the System Log on each boot:


The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter\8&16310cd5&1&01.
The Event Log Online Help doesn't appear to be working anymore.
I was able to resolve these types of errors with the assistance of the Event Log Online Help in the past. Does anyone know the procedure to troubleshoot this error so it can be resolved?
Thank you for your assistance.
Regards

More replies
Relevance 76.56%

Hello,
I've been experiencing multiple bluescreens daily and what's odd about them is they occur randomly while using many programs; however, I have noticed that they occur more frequently directly after opening a new tab, loading a new site or running a game (StarCraft II).
Looking through Event Viewer. I see a list of warnings and errors immediately prior to the BSOD. In chronological order:

9:07:18 PM CRITICAL- "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."

9:07:28 PM WARNING- "The driver \Driver\WUDFRd failed to load for the device USB\VID_0483&PID_2016\5&249af6f9&0&2."

9:07:42 PM ERROR- "The previous system shutdown at 9:05:49 PM on &#8206;7/&#8206;13/&#8206;2011 was unexpected."

9:07:44 PM ERROR- "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000099e0000007e, 0x0000000000000002, 0x0000000000000001, 0xfffff80002a92885). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 071311-32869-01."

9:07:47 PM ERROR- "Audit events have been dropped by the transport. 0"

I also get this warning quite often:
"The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 ... Read more

Answer:Multiple BSOD daily "\Driver\WUDFRd failed to load for the device"

10 more replies
Relevance 100.45%

Hi,
So my first xps 13 had ASF2 force off issues so I returned it and wanted to give another try, hoping this time I'll be lucky enough to get a properly working unit this time. However,

Since 4 days my laptop reboot 3 times, ASF2 force off error in power logs every time. And The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&0 error in event viewer. (Also attached. ) Also whenever this problem occurs, "The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 30 seconds since the last report." warning is also given afterwards.
edit: All of them happened while on battery
Help and suggestions are welcomed. I will send this unit back and stay away from dell If i can not solve this again.

More replies
Relevance 96.76%

I keep getting this warning in Windows 10 at every boot, as well as:
 
Can't load \Driver\WUDFRD for ROOT\SYSTEM\0002
 
I've seen that this is unsolved in other threads, hence opening a new one...and crossing fingers
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

More replies
Relevance 90.2%

Hello, i got this message in eventviewer after boot into Windows 7 x64: Error while loading driver \Driver\WUDFRd for device USB\VID_147E&PID_2016\6&32feb3ab&0&3. other versions of driver are tested (direct from UPEK and from MS Update catalog) but won't work too :-( Fingerprintsuite is now deinstalled (only latest driver from UPEK installed ) and message is still existing!!! If driver is not installed, no error message! Cables are checked and ok:  Has anyone got an idea? regards Martin

Answer:x201 - Error while loading driver \Driver\WUDFRd for device USB\VID_147E&PID_2016\6&32feb3ab&0&3.

Hi
Welcome to Lenovo Community
 
 
Try uninstalling the driver and clear it from windows registry .
 
Then Update the Bios  to latest , after that install the drivers
 
Bios Update
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6quj17us.exe
 
FingerPrint reader
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/83f807ww.exe  Hope This HelpsCheers!!!

1 more replies
Relevance 90.2%

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

Answer:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

4 more replies
Relevance 89.38%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

Answer:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

3 more replies
Relevance 83.23%

Hello Guys I need your help in my laptop Graphics error.I uninstalled my AMD graphics card recently from control panel.Now i am trying to install the drivers and i have downloaded my graphics card driver from www.amd.com .But when the drivers installing there is a error message coming that is "failed to load detection driver".Please Help Me.
My Laptop is HP Probook 445 G1.
 

Answer:AMD Graphics Driver Error "Failed To Load Detection Driver"

One more thing guys.My graphics convert into Standard VGA Graphics.
 

3 more replies
Relevance 79.95%

When i start my computer up I get the message Error 7323 1 or more network drivers failed to load.

Answer:Driver failed to load

If you are networked then you have trouble beyond my experience.If not, then which Windows are you running 95-XP?Try Google with error+7323 and see what turns up......and maybe my posting will encourage someone with wider knowledge to help you.

7 more replies
Relevance 79.95%

I turned off System Restore in order to run Superantispyware and when I tried to turn it back on ,,System Restore encountered an error to enable/disable one or more drivers failed to load. Restarting did not help. With some help by googling my problem i was lead to event manager and found errors at the time I tried to turn System Restore back on. "The following boot-start or system start driver failed to load" It listed nvatabus and nvraid. I have ran Superantispyware with System Restore off9because I cannot get it turned back on) but I have not tried it in safe mode. Should I try running it in safe mode or do you have any other suggestions or reasons why these drivers will not load? Thanks a bunch for any help you can give me with this!!!
 

More replies
Relevance 78.72%

Any suggestions on what to do about this?



Updating the driver didn't pan out, neither did uninstalling and rebooting (driver installation failed on reboot). Drive was working before. I know this can be solved; seen this before on somebody else's computer a year ago. On the other hand, maybe the driver isn't compat with 64bit Ultimate--but it was OK under 32bit Home Personal.

Answer:CD drive driver failed to load

Correction. The drive in question isn't a CD drive. It's a DVD drive.

20 more replies
Relevance 78.72%

I keep getting the following message which I don't understand:

" Output Firewall
Output Firewall
Failed to load Output Firewall netwark operation driver.
Output Firewall functionality is limited: failed to load AFW.SYS driver."

I'm using the free Outpost Firewall which I downloaded from the Majorgeeks site.

syrk
 

Answer:message: failed to load AFW.SYS driver

Go here and see if this helps.
http://www.outpostfirewall.com/forum/showthread.php?t=22526
 

4 more replies
Relevance 78.72%

Has anybody been able to fix this warning message that came with W8? Every machine I have running W8.1 gets a couple of these warnings at boot time. This system ASRock Z77 OC Formula/3770K seems to get a triple dose of the warnings. I have tried the "Fix" of setting the startup to "Automatic" for "Windows Driver Foundation" but that had no effect. I do have a USB Keyboard and Mouse connected to the system but then who doesn't these days. I know it is just a warning message and probably has no effect on the system but.... I'm so close to having a clean event log at boot time. Any next step suggestions would be appreciated. Maybe W8.1.1 will fix?

Answer:Driver\WudRd Failed to Load....

I used to see this, but I don't any more. I don't remember what I did to fix it, it was a while back.
But I have the service set like this, so maybe that was it:

wudfsvc = Manual start

10 more replies
Relevance 78.72%

Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.

Answer:Driver failure WudfRd event 219 help please ?

Issue solved

5 more replies
Relevance 78.72%

Hello all I am having issues after fresh install of win 10 help would be appreciated on this fix please if you can point me in the right direction for updated device drivers for this error I have no idea how to repair this screenshots attached below pc also shuts down randomly while playing games I hope this is just a power supply issue and nothing more such as motherboard because on my +5 volts in bios reading it shows 10.200 which is abnormal

The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{7701c354-960c-11e5-9bc2-806e6f6e6963}#0000000000100000.

Answer:Driver failure WudfRd event 219 help please ?

Issue solved

1 more replies
Relevance 78.31%

I can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.

More replies
Relevance 77.9%

the motherboard is an msi 760Gm-E51
I went to msi website and downloaded the drivers for the motherboard because the system was crashing. I thought it was probably caused but the graphic driver but when I uninstall the driver and tried to run the ccc install again I still get failed to load detection driver. I tried using ddu to totally uninstall the current graphic driver but that didnt work.
I dont know what else to try to get this computer working

Any help will be great thanks in advance.
 

Answer:ccc failed to load detection driver with new install of win 7

Did you try the Factory install disks.? I only downloaded a few drivers once & it messed up my Win7 PC. I am sure you will get help from one of our great Tech Gurus on this forum.
 

7 more replies
Relevance 77.9%

"OMCI system driver failed to load on start up." Source: Service Control Manager.

I have had this error message appear repeatedly over the past 2 months or so.

More recently the following also fail to load:
PCIIde
ViaIde

Windows (XP SP2) also often fails to start, sometime failing after the Windows logo screen has run, sometimes it doesn't get that far. Hitting the power and re-trying works...

Any advice appreciated.
 

Answer:System driver OMCI failed to load...

Kservice
and
PC tools Anti-Virus Engine (now uninstalled)

Also have frequently hung on starting.

Another recent error:
"The Messenger Sharing Folders USN Journal Reader service service failed to start:
...The service did not respond to the start or control request in a timely fashion. "

Another recent error
"An error was detected on device \Device\Harddisk0\D during a paging operation."

and

"The device, \Device\Scsi\JRAID1, did not respond within the timeout period."
 

3 more replies
Relevance 77.9%

I have this previous problem... you need not read this for this current problem though
http://www.techspot.com/community/topics/bsod-upon-non-safe-mode-booting.212365/

I run on Windows 7 Home Premium 64-bit.

I want to install a newer update on my ATI graphics video driver. So I downloaded the one that suites mine which is AMD Catalyst Software Suite Omega (14.12) (for Radeon HD 6000 series) and during installation it says "Failed to load detect driver" and stops. Now I don't know what to do.

This is my first time downloading this so there are no programs like this in my "currently installed programs". I tried uninstalling the driver in the Device Manager but it just reinstalls back(when I scan for hardware changes). Thanks for the reply!
 

Answer:AMD Catalyst Failed to load driver detection

Is this a desktop PC or a laptop?
 

1 more replies
Relevance 77.9%

I am trying to get rid of event viewer errors and warnings at bootup. This one still eludes me. It appears to be a driver error related to my Epson RX680 printer. Can someone give me a few tips on how to narrow it down further?

"The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_EPSON&PROD_STYLUS_STORAGE&REV_1.0 0#9&2856B3B7&0&070E018870865F0000&0#"





TIA

Answer:Event 219 "WUDFRd failed to load " warning at bootup

What have you already tried to fix the issue? Have you tried looking for an updated driver from epsons website?

3 more replies
Relevance 77.9%

I'm working with a Dell Dimension C521 PC. It came with a PCI-Express video card which apparently has failed, yet the motherboard itself has on-board video. The system will boot using this video output (as opposed to the card which produced nothing) but when it finally gets to windows the auto-detect driver routine kicks in and begins to detect the video card, prompting the user to "Continue Anyway" to finish installing unsigned drivers. Unfortunately this event takes place in front of the installation of the USB keyboard and mouse (times like these I wish it had PS/2 ). Anyway, whether I boot up into Safe Mode or normal a prompt comes up about installing drivers for the on-board chipset. I can't interact with it because the driver install routine for the keyboard/mouse becomes interrupted.
 

Answer:Dell Dimension C521; USB key/mouse driver load interrupted by video card driver load

Bump. I've been thinking... the only way I think this can be fixed is if I boot from a Linux CD or something similar and delete a particular set of drivers for this video card. It can't prompt you to install any drivers if they don't exist, right? But I don't know where to go to delete such files and prevent them from automatically trying to install themselves. Any ideas?
 

2 more replies
Relevance 77.9%

I have a Toshiba satellite C-50D-a-12x with windows 8.1 and often it crash and sometimes arrest.

In the events log every time an advise appears:

Nome registro: System
Origine: Microsoft-Windows-Kernel-PnP
Data: 22/01/2014 12:45:37
ID evento: 219
Categoria attivit?:(212)
Livello: Avviso
Parole chiave:
Utente: SYSTEM
Computer:
Descrizione:
Impossibile caricare il driver \Driver\WudfRd per il dispositivo SWD\ SensorsAndLocationEnum \ LPSensorSWDevice.
<System>


What i have to do ???
Thanks

Answer:Satellite C50D-A-12x crashes often - driver WudfRd

Hi

It looks like the driver / service WudfRd causes the system crash.
After googling around it seems that other people have had the similar system problems.

The WUDFRd is a service and it is called "Windows Driver Foundation - User-mode Driver Framework" which is also responsible for USB devices

I would recommend you to disconnect all the devices you had connected to the notebook?s USB ports. You should also uninstall all USB hubs which appear in device manager and then reboot the notebook.

You should also go into services .msc and look for Windows Driver Foundation - User-mode Driver Framework. Check the status of this service. Usually it should be set to manual.
Under "Status" it could be set to off.
If you pluggin a USB device the status change to "Started".

Try to changed the startup type to "Automatic". Then shut down the notebook and restart. Then check the status again to see if it would be still set to automatic.

I recommend you to test and to monitor the notebook functionality without connection of any USB devices. Then plugged in an USB device again and check if an error would appear or system would crash.

1 more replies
Relevance 77.08%

my friend already finished installing windows 7 ultimate..it works well but he always get the error message "SlowDownCPU Failed to load hardware monitor driver" each time when he start the computer.he already looked at his device manager but there is no indication that his driver is missing or error..but the most important thing, there is no problem with his computer n it functioning well..so anybdy can help me? what the message is all about? how to solve it..or if cant solve it,then how to turn off that error messge..he use desktop, n i not so sure about his computer specification..thnks

Answer:SlowDownCPU Failed to load Hardware Monitor Driver

SlowDownCPU.exe Windows process - What is it?





Quote:
Important: Some malware camouflages themselves as SlowDownCPU.exe, particularly if they are located in c:\windows or c:\windows\system32 folder. Thus check the SlowDownCPU.exe process on your pc whether it is pest.


In your case, I don't think its a virus as stated above, as if the virus was doing anything its designed not to notify you about it.

First, open the start menu, and in the search box, type in

Folder Options

and press enter. Navigate to the 'View' tab. Check 'Show hidden files and folders'.Then tell him to navigate to C:\Windows and in the search box, type in 'SlowDownCPU.exe'. See what results come up. If there are none, there is no virus affecting system files. If there are results, we will guide you step by step.

EDIT: To stop the program starting up at boot, in the search box type

msconfig

and press 'Ctrl' + 'Shift' + 'Enter'. In the 'Startup' tab, uncheck anything to do with 'SlowDownCPU'.

5 more replies
Relevance 77.08%

I have seen this event several times in the Event Viewer program. Is it something that I should be concerned?

Answer:The following bootstart or systemstart driver failed to load: Rawdisk3

Do you have a portable drive or flash stick plugged in during this time?

Please post back a screenshot of Disk Management - Post a Screen Capture Image
showing fully scrolled, after this error next appears and without touching anything else.

2 more replies
Relevance 77.08%

Hello all.

After getting my FF7 set from a friend a couple weeks ago, nostalgia kicked in and I got his FF8 copy also but I'm having problems with it. I also have no problem playing FF7.

Installing it goes along with no problems till the end, where it says "Failed to load custom driver" and it goes to desktop. I try to start the game and same thing. I got the 1.2 patch but am unable to install EAX because again it says failed to load custom driver. What is going on?

Windows XP Home Edition
Pentium 4 2.2 Gz
256 RAM
Intel 82845G/GL/GE/PE/GV Graphics Controller
 

Answer:Final Fantasy 8 (PC) Failed To Load Custom Driver

13 more replies
Relevance 77.08%

I am attaching a screen shot of the Kernel-PnP Event 219 that suggests that a device driver is failing to load at start up. I have been receiving this message for about three weeks and can't relate it to any particular event on my computer. I have trawled the net and had a look at Device Manager but I can't ascertain which driver is not loading and presumably needs to be updated.

I downloaded some software called "Driver Manager" and that has identified 28 out of date drivers. To correct the problem I have to pay a subscription that I can not really afford. Can someone help me identify which driver is causing the problem please?

Answer:Kernel-PnP Event ID 219 Driver failed to load problem.

Judesman, I don't recommend paying a subscription as you can get the drivers yourself. That seems to be a plug n play device, look ath the user action section in this link Kernel ID 219

9 more replies
Relevance 77.08%

Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:

Windows failed to load because a critical system driver is missing or corrupt.

Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys

Can anyone shed some light on how to resolve this?

Thanks,

Evan

Answer:Windows failed to load b/c driver is missing or corrupt

: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various

Go to website of that company and try to download driver.

You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.

Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.

1 more replies
Relevance 77.08%

Hi,
I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

Answer:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),





Quote:
Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

9 more replies
Relevance 77.08%

Hi all.

My pc has been hanging randomly and I have to use the power button to shut down/restart.

I've checked in events and there is this error which seems to be causing the problem as the time matches with the hang time.

I posted another topic with another bsod issue in the bsod section, and I was told to run some tests.

A day or so ago, I tried and changed Driver Verifier settings as were instructed in one of the threads here which also mentions that it is an iffy thing to do.

Anyway, I lost windows and could not start again, luckily I had a backup made, and after formatting my HD, loaded it on to it. This error seems to be a driver issue (Screenshot).

Should I go down the Driver Verifier route again ? To be honest I don't want to. If I lose windows again it would be very frustrating.

I've run the following tests so far here

I have no driver issues showing up in Device Manager, so that looks ok.

Please advise. Thank you.

Answer:The following system start driver(s) failed to load: mbmiodrvr

I looked around and found a reference to Mother Board Monitor which at least sounds like it might be the culprit.

Do you have that application installed, or some other temperature / fan speed monitoring sw?

Alex Van Kaam, the author of Mother Board Monitor, stopped development in 2004 citing his frustration getting technical information from mfgrs.

Anyway, if you have Mother Board Monitor installed, remove it. If you have other monitoring sw, post what you have and someone might know more about that sw (MBM source used?)

If you haven't tried a Clean Boot, here's a tutorial you can follow:
Troubleshoot Application Conflicts by Performing a Clean Startup

Bill

5 more replies
Relevance 77.08%

Hello,

Can someone please help me find out what driver or service 'ksop' is? Or, how to fix it?

I've been troubleshooting my Windows 7 laptop to try and find the cause of random, sudden shutdowns and a bunch of 7026 and 7001 errors. This 'ksop' error pops up every time I reboot.

I tried clean-booting, SFC, CHKDSK, etc, but I can't narrow down a service as the culprit. I tried Googling 'ksop' but I couldn't find anything that explained what it was, or a record of anyone else asking about this issue.

Anyone out there have any idea?

Here's the event info:

Log Name: System
Source: Service Control Manager
Date: 3/22/2015 12:59:37 AM
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
The following boot-start or system-start driver(s) failed to load:
ksop

System
- Provider
[Name] Service Control Manager"
[Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}"
[EventSourceName] Service Control Manager
- EventID 7026
Qualifiers 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[SystemTime] 2015-03-22T07:59:37.826903400Z" />
EventRecordID 220852
Correlation
- Execution
[ProcessID] 548
[ThreadID] 620
Channel System
Computer *********
Securit... Read more

Answer:Event ID 7026: 'ksop' driver failed to load?

So far all I've been able to find out is that 'KSop' is a pool tag, and it's associated with something related to Windows 7. I still don't know what driver it's for, how to find out, or how to fix.

If anyone has any ideas, clues, or suggestions, it would be greatly appreciated. Please, I'm at my wit's end!

3 more replies
Relevance 76.67%

Slow booting.  Really slow booting.  Seems that using an SD card for ReadyBoot/ReadyBoost is causing the issue.  But why?
On investigation, this only started happening back in November, which coincides with the install of KB2685813 UMDF 1.11 (http://support.microsoft.com/kb/2685813).
Could be a bit buggy....


I'll uninstall the update and see if this solves the issue.
So, first event:

Log Name:      System
Source:        Microsoft-Windows-DriverFrameworks-UserMode
Date:          04/01/2013 10:47:30
Event ID:      10114
Task Category: Startup of the UMDF reflector
Level:         Information
Keywords:      (2)
User:          SYSTEM
Computer:      LAPTOPW7A
Description:
The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-DriverFrameworks-UserMode" Guid="{2E35AAEB-857F-4BEB-A418-2E6C0E54D988}" />
    <EventID>10114</EventID>
    <Version>1</Version>
    <Level>4</Level>
   ... Read more

Answer:UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Hmm.  Now that is interesting.
In my System event log I was getting an NTFS error (57: Failed to flush tlog).  I didn't think it was from my HDD, so using diskpart, I ran a 'CLEAN ALL' on my SD card, then recreated the FS as exFAT (previously it was NTFS).
Seems to be working now, although I'm getting VDS Basic Provider errors (Unexpected failure.  Error code:
[email protected]) "which can be safely ignored" (re: KB979391).
This begs the question: if it can be safely ignored, why is it raised in the first place?
Boot time is also restored to an acceptable timescale.

11 more replies
Relevance 76.26%

hi, basically I have an Acer Aspire 5738Z notebook it was going a bit slow recentley so I decided to wip it clean and start again, before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot. I thought this was my chance to wipe the whole think clean (using Alt+F10, acre Erecovery management) so I started doin it and after 17 long hours of the progress being stuck on 82% I decided it was time to turn of the computer and try it again, which I did and the whole thing was completed fine but when it restarted it came up with the message "windows failed to load a critical driver is missing or corrupt" and attempted to restart and try again only to be greeted with the same message again!

I have no windows 7 DVD but after a few hours of scratching my head I realized that my brother has the exact same laptop so I made a system repair disk from his laptop to use on mine... only to find that "startup repair cannot fix this computer automatically" and now it boots up but gets stuck on the windows logo screen and I've currently been there for almost 3 hours!

Can anyone help me please the laptops only a year old and I can't really afford the cost to get it fixed professionaly any help would be greatky appreciated... Thanks in advance guys!

Answer:windows failed to load critcal driver is missing or corrupt...help!

Bump!

6 more replies
Relevance 76.26%

File: \windows\system32\drivers\ltoxvyo.sys

status: 0xc0000225

Vista Home Premium.

need some help on how i can get this machine functional again.

i do have the vista installation disc unfortunately due to the short length of the SATA connectors from the power supply they simply do not reach the ROM drive while being connected to the hard drive at the same time.

if anyone needs any more info just ask.
help would be much appreciated,

Answer:(Failed to load because of a critical system driver is missing, or corrupt)

Hello and welcome to the forum...

Can you tell me if you can get to your main desktop if not have you tried to boot in safe mode. Here's how to boot in safe mode just in case.

Safe Mode

But please let me know if you can get to your desktop.

Tom

3 more replies
Relevance 75.44%

Hi everybody,

This is my first post on this forum. I've recently come across a problem with my computer. I'm running Windows Vista 32 bit. I shut the computer down one day, and the next day turning it on I came across this problem.

File: \Windows\System32\Drivers\nqgbwc.sys

Status: 0xc0000225

Info: Windows failed to load because a critical system driver is missing, or corrupt.

I have no clue what this means. It said insert windows installation disc and repair computer. I did this, self repair found nothing. I then tried system restore and it could not initialize which is a pain in the ass. My last resort is to reinstall windows vista but I think I'm going to lose everything.

If anyone has any advice or suggestions it would be greatly appreciated.

Thank you,
Kevin

Answer:Windows failed to load because a critical system driver is missing, or corrupt.

First see if you can boot into Safemode without it giving you that error. If you can, first try searching for that driver to see if its even in your system32 folder.

I recently just checked my computer and it is not in mine by default, which means its a file relating to a third party program/app that has been installed on your machine. If you can figure out what the abbreviation for NQGBWC is from the list of installed applications on your computer, then you can isolate which program on startup is causing the failure on booting windows due to the missing system file.

As you may have already tried, i cannot simply google search nqgbwc.sys as it gives me just THIS post only. If you cannot find the problem, then the only thing possible from there is to reinstall your OS but of course BACK UP EVERYTHING IMPORTANT FIRST.

2 more replies
Relevance 75.44%

Hi,

I have a Qosmio X770 and its blue screening occasioanly but I cannot find out why as the Crash dump driver fails to load on boot.

I gave googled and tried recreating page file, deleteing, it rebooting, recreating again, also setting dedicate dumpfile in the registry and still every boot I get event ID 45

The system could not sucessfully load the crash dump driver.

I have ran SFC and all files are fine

Windows 7 64 Bit, Main OS

anyone any ideas?

Thanks

Answer:Qosmio X770 - BSOD and Crash Dump Driver Failed to load

Found an user who had the same issue with the dump file and this could be solved by deleting paging file, then resetting it and after that seems to have solved the problem...

8 more replies
Relevance 75.44%

windows \system32\drivers\ msisadrv.sys
 
Status: 0x000000f
 
would like to repair this without reloading if possible
 
thanks
Brett

Answer:windows failed to load because a critical system driver is missing or corrupt

I have a few questions:
1. Do you have a repair disc?
2. If not, does the PC have a recovery partition?
3. Can you boot from a live CD (such as Puppy Linux)?
4. What were you doing before the problem started?

7 more replies
Relevance 75.44%

the following boot-start or system driver(s) failed to load: SRTSP SRTSPX
Anyone were seen that problem?
Laptop is a compaq and running windows Vistahome Premium
cheers

Answer:the following boot-start or system driver(s) failed to load: SRTSP SRTSPX

Ohh sorry.. got that from the event log..

3 more replies
Relevance 74.62%

File: \windows\system32\drivers\ksecdd.sys

Status: 0xc00000e9

Info: windows failed to load because a critical system driver is missing or corrupt.

Any help is appreciated. The computer will not even turn on or get past this point.
 

Answer:Info: windows failed to load because a critical system driver is missing or corrupt.

if your computer is telling you that window failed to load, that means you need to format the system and install in window on it, and you must do it before i damage your hard drive.
prince
 

5 more replies
Relevance 73.39%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Relevance 71.75%

So anyone got any ideas for this issue? It seems as if though its not hardware related and more driver/software related. I've put my cpu at stock settings underclocked my graphics card changed ram timings and this is a new set of sticks since i replaced them following someones post saying that that was their issue so gave it a try but apparently it isn't go in safe mode uninstall drivers run driver sweep reboot reinstall nothing problem persists and yes i do have the latest mobo/vid drivers.

[CPU] Intel? Core? i7 CPU 920 @ 2.67GHz (8 CPUs), Overclocked~4.2GHz
[RAM] 6GB Corsair Dominator DDR3 1600 Triple channel
[MOBO] Asus Rampage II Extreme X58
[GPU] GTX 285 SSC X2 SLI 740/1660/2800
[HDD] WD Velociraptor 300GB x2 raid 0 stripe
[PSU] Corsair 1000HX
[SC] X-FI Titanium
[Case] Lian Li PC-P80
[OS] Windows Vista? Ultimate SP1

Everything looks in order?

More replies
Relevance 71.75%

trying to fix audio problems, volume control states that no audio output device is installed, i downloaded the appropriate driver from lenovo site, also downloaded two seperate versions of conexant, the installation process begins but is cut short and the following message displayed..."driver instalation failed could not find the MEDIA device for this driver" can anyone offer some advice?

Answer:R61e "driver instalation failed could not find the MEDIA device for this driver"

nath, welcome to the forum, have you installed the UAA HD audio driver? You can find it by scrolling down a bit on the R61e Audio Driver Site, please ensure you follow the instructions.  Hope this helps

2 more replies
Relevance 71.75%

I tried to update my older Radeon ATI 5450 GPU via windows update...

I received the message from windows update, and showed it failed update with the 0x800706be

However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?

Answer:Failed Update 0x800706be driver...but device mgr shows updated driver?

You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.

2 more replies
Relevance 71.34%

Hello all, first say that my English is very bad.My sister bought a Lenovo G560 laptop that had Windows 7 operating system. She asked me to change the operating system because she likes most Windows XP.I installed Windows XP normally. all good, but the audio driver is given on this page does not work. I've searched around the internet and I could not find the driver. According toEverest, the driver is "Conexant Cx20585".Please, I need your help, I'm going crazy and I did not concentrate on my studies for this.pleaseeee!!for more information, the error when installing the driver on this page is this:Failure to install the driver: Could not find the device for this driver(In Spanish: fallo en la instalación del controlador: No fue posible encontrar el dispositivo para este controlador)













Solved!

Go to Solution.

Answer:Failed installation of audio driver for Windows XP. Lenovo G560. Driver --> (Conexant Cx20585)

Hi Jose_Galdos,
 
 
That's listed as the Conexant Pebble High Definition Smart Audio.
Seeing as how it's HD sound, I think you'll need to load the Microsoft UAA driver first to get it running under XP.
 
Is  this the driver that you tried to install?
 
Dave

7 more replies
Relevance 71.34%

Hi , I just reinstalled my SL500 but i got a problem.I download the lastest audio driver from lenovo site and i've got this message Driver Installation Failed : Could not find MEDIA device for this driver....I've searched everything i could find in google and the forums but i've got nothing... I'm usin Win XP 

More replies
Relevance 70.52%

Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu
9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were
"check if your hd is listen in bios".So, it IS listed in bios but I can't reinstall windows nor access it, any suggestions?

Answer:No drivers found. click load driver to provide a mass storage driver f

Nevermind, I sent my laptop to a technician and he told me I burnt the hard drive by destroying some cables while cleaning with compressed air.

1 more replies
Relevance 70.52%

Hello, various other people have posted this error (search function used), but noone has gotten an answer. Whenever i try to upgrade my sound driver to  4.76.0.0 / 3.54.0.51,be it manually or via system update the sound driver gets messed up. To sound icon in the taskbar gets a red X, the sound card in device manager gets a "!", and says "Windows could not load driver". In other threads people suggested the driver is not signed so Vista64 refuses to load it, however under Driver details it says its signed by Microsoft...  I would appreciate if someone could tell me how they got this driver to work on their 64bit machine, i'd like to enjoy the fixes and benefits of the new version. Thanks.   





Thinkpad T400 (Windows 7 Ultimate x64)









Solved!

Go to Solution.

Answer:T400 (sound/audio) Vista x64 Conexant II 4.76.0.0 driver error "Could not load driver"

Hi there, I am having the exact same problem after updating the driver to Conexant Audio Software 4.76.0.0  / 3.54.0.51. How did it resolved for you? Thanks, 

9 more replies
Relevance 70.52%

Hey, I'm trying to install a new copy of Windows Vista on my desktop. I get this message "NO drives were found.Click load driver to provide a mass storage driver for installai" right after the installation step of "which type of installation do you want?" I select Custom because Upgrade isnt bold so i'm not allowed to click it.

I have a HP Pavilion Slimline s3713w
Sn:3CR847138P
64bit

Answer:NO drives were found.Click load driver to provide a mass storage driver for installai

Hi -

Is this your system? --> http://h10025.www1.hp.com/ewfrf/wc/s...=3870526#N1740

If link does not work, paste this into web browser address bar -

Code:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3870526#N1740

I don't see XP listed as an OS for it. What OS came pre-installed?

Is the copy of Vista a full retail copy? If so, back up any files you need and wipe the HDD with KillDisk. Then try Vista installation again.

KillDisk --> http://jcgriff2.com/killdisk_imgburn.html

Regards. . .

jcgriff2

.

1 more replies
Relevance 70.52%

Hi all, I have a Dell M1530 XPS and what a nightmare I am having installing Windows 7 on it.
I go to install and get hit by this message
"No Drives were found. Click Load Driver to provide a mass storage driver for installation"
When I click next nothing happens I have the to cancel the installation.

I have tried pressing F2 to bring up the setup menu but do not know what to do from there.
I have had a brand new motherboard fitted from dell and now unsure what model I have now.
Using Belerc Advisor this is what it says about my system, any help would be great:
Processor a
1.67 gigahertz Intel Core2 Duo
64 kilobyte primary memory cache
2048 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Drives
247.18 Gigabytes Usable Hard Drive Capacity
146.89 Gigabytes Hard Drive Free Space

TEAC DVD+-RW DVW28SLC ATA Device [CD-ROM drive]

Ricoh MMC Disk Device (247.18 GB) -- drive 1, s/n 0001
 

Answer:o drives were found. Click load driver to provide a mass storage driver installation

Hi there

Some problems I had and that also BSOD alot was that the hard disc compability mode was set wrongly, if so you would not see the discs.

Check in bios for somwthing like "AHCI" mode and "Compability" mode.

Put it to compability as otherwise special drivers are neededm ones added you can swap this back to get more speed.
Regards

Ambrose...
 

1 more replies
Relevance 70.52%

emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found. click load driver to provide a mass storage driver for installation. any healp well be highly appreciated. many thanks!!!
 

Answer:no drives were found. click load driver to provide a mass storage driver for installa

Is your drive listed in BIOS? It could be a hard drive failure. No drivers should be needed for Windows 7.
 

1 more replies
Relevance 70.11%

Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:

a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Go to the sound card makers web site and DN the latest XP drivers.
 

1 more replies
Relevance 70.11%

Ok I have done quite alot of searching on here and I have found out quite a few things I have exhausted every friggin resource imagineable. The only thing I have yet to try is the registry edit. Now I pretty much have that down I just have one simple question. When deleting the upper and lower filters...

While in the registry I have found the upper filters on the right hand side. The only problem there is - No lower filters.

Could this be a problem?

Also , do the upper/lower filters need to be removed from the Control set 001 and Control set 002 . Please get back to me ASAP.


Thanks.
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Anyone have even the slightest clue please let me know.
 

6 more replies
Relevance 70.11%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this???
Any help is greatly appreciated
 

More replies
Relevance 70.11%

I have tried everything out there to load the realtek, crystal audio, any AC drivers for sound for my XP. Yet when the installation is nearing completion I get the error message "Cannot load Crystal WDM Audio Codec driver. The driver file may be missing. Try installing the driver again, or contact your system administrator." when i try using the Realtek or Dell drivers, same error, but interchange the driver name in the dialogue. Any help is greatly appreciated.

My System Info:
Computer: Operating System Microsoft Windows XP Professional
Operating System: Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
OS Service Pack - DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard: CPU Type Mobile Intel Pentium 4M, 2000 MHz (20 x 100)
Motherboard Name: Dell Latitude C640
Motherboard Chipset: Intel Brookdale i845MP
Multimedia: Audio Adapter Intel 82801CAM ICH3-M - AC'97 Audio Controller [B-1]
 

Answer:Crystal CS4205 Sound Driver Windows XP Driver will not load

:wave Welcome to Major Geeks! :major




Use Everest to get a report of your system?s hardware, OS, and drivers. Upload the report as an attachment
Everest: http://www.majorgeeks.com/download.php?det=4181
When Everest is done scanning, click "Report" at the top of the Everest window, click next to get to "Report Profile", select "Hardware related pages", click next, select "Plain Text", click "Finish". Then when it is done processing, click "Save To File". Save it where you want to. (I would use Desktop.)
Click "Go Advanced" in the MG reply box, scroll down a little way until you see "Manage Attachments", click it, browse to your file, click "Upload", and close the window. Then submit the post. You may have to also type something in the reply box, like, "Here's my report.", so that it will submit.Click to expand...

Once we have the report, we can try to locate the drivers for you!

(above instructions originally posted by MG member musksnipe... thanks muskie!)
 

1 more replies
Relevance 70.11%

hey iv gotta western digital 3200aavs and my new hardware wizard wnt install it.. i tried driver detective.. but tht cnt identify my computer make and model ect.. so tht wnt help... and wen i connect my hdd via usb it blings so i know it cn see it but nufn in manage tab tht i access via rgt clickn my comp.. nufn in device manager so its not a matter off not bein allocated a drive letter.. i think my comp doesnt even regester it is a hdd!! any ideas?? or drivers?
 

More replies
Relevance 70.11%

I was looking at my system logs today and found an error that is being repeated quite a lot and I would like to get rid of the darned error.

The error in the applications event loge is TrueVector Service, event 5003. The message in the event says:

TrueVector driver: Driver install or load failure: LoadNTDeviceDriver. Win32 error: The system cannot find the file specified.

I checked on the Internet and have found numerous resources indicating that TrueVector is a part of zone alarm. The weird part is that I have never had zone alarm or any other firewall installed -- Note even Microsft's within XP SP2. I have no references to Zone Alarm in my registry. My references to TrueVetor are in My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\TrueVector Service

Can someone suggest any soluton to getting rid of this event?
 

Answer:Solved: TrueVector driver: Driver install or load failure

13 more replies
Relevance 70.11%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.

The driver is MAT****A DVD-RAM UJ-861H ATA Device

And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.

Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

Please try the steps below:

1. Uninstall all third-party burning software, such as Nero and Roxio.

2. Perform a Clean Boot to test the result.

Clean Boot

========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.


Note: Please click Continue if the "User Account Control" window pops up.


b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.


Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".

Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.

If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.

If not, you may need to restore the system to its factory settings.

Hope it helps.

2 more replies
Relevance 70.11%

Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device. How can I fix this?

Any help is greatly appreciated,

thisismyuser
 

Answer:Solved: Windows cannot load the device driver for this hardware. The driver may be co

16 more replies
Relevance 70.11%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this??? I really need help to fix this
Any help is greatly appreciated
 

Answer:Windows cannot load the device driver for this hardware. The driver may be corrupted

8 more replies
Relevance 69.29%

Everytime I start Windows, I see the following error in Event Viewer:
 
The following boot-start or system-start driver(s) failed to load: 
VBoxNetAdp

Answer:The following boot-start or system-start driver(s) failed to load: VBoxNetAdp

Do you have Virtual Box or Avast antivirus installed?

1 more replies
Relevance 69.29%

Guys, I'm running Windows XP and recently when I turn on my PC it makes a single beeb and then seems to run OK.

Tonight, I was running Firefox and the system seemed to slow, before becoming completely unresponsive. I had Task Manager open at the time, however when I tried to shut Firefox down the PC started bleeping like mad and I was forced to do a hard shut down.

I waited about 1 minute and then rebooted and immedietly went into the Error log and found the following entry:

"The following boot-start or system-start driver(s) failed to load: StarOpen"

I tried Googling a fix with no luck and I can't find StarOpen in the Services, Apps or Program files. Nor could I find it listed in the Device Manager or the Boot-start list in msconfig.

Can anyone tell me how to fix this?
 

More replies
Relevance 69.29%

Ok I will copy and paste the message:

The following boot-start or system-start driver(s) failed to load:
aswSP
spldr
Wanarpv6

I found it in vista event viewer. I am currently running vista in safe mode and dont really want to restart the pc. This is my first post on these forums and they look great. SO please help!

MY PC Specs:
2 (1x1) gb RAM
1.6Ghz CEL E1200 Dual Core CPU
Vista Ultimate
CD Driver
256MB GFX Card
Nothing else you really need to know

Answer:VIsta The following boot-start or system-start driver(s) failed to load:

Could be spyware.

I would run a Trendmicro free scan.

3 more replies
Relevance 69.29%

I have system error: The following boot-start or system-start driver(s) failed to load: tvtumon My computer has all pathes and latest rivers installed. Why this driver die?

More replies
Relevance 69.29%

Sorry if this has already been answered/wrong place. I looked at Google but thought I double check here (since the solutions via Google seem to be refering to a different OS to mine)

First of: Windows Vista, SP2, 64 bit.

Now sometimes (and not now since I am writing this) my Keyboard/Mouse just stops working. It freezes completely and I am unable to use it and am hence required to restart the computer. This happens at random occasions but it usually involves opening some program or what not (I noticed a prominent pattern that the mouse/keyboard freezes whenever I go to speedtest.com measure my speed and then once the download speed bar is finished and upload is about to begin my computer freezes).

I had a look at my event viewer and noticed this:

The following boot-start or system-start driver(s) failed to load:
i8042prt

Now I am not sure whether this appears at the start and then once I run a program or do something (like go on speedtest.com) the commuter then freezes (i.e. my mouse/keyboard is non-responsive) or the error message comes up after my computer freezes but any help in fixing this mouse/keyboard freezing would be very grateful.

The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg informa... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Originally Posted by Petze


The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg information, is it possible that I wont ever get access to my keyboard/mouse? My worry is that I might change some value so that I will have no way of getting to the computer with the keyboard/mouse (I am not good with bios) and would not be able to get help on the internet since I can't connect!



It is bad idea

DWORD Start may have following values

0 -boot ,1 -system ,2- auto ,3 -demand, 4 -disabled. Surly if you'll set to 4 you lose access to keyboard and mouse.Don't modify anything.Find folder C:\Windows\Minidump pack it and attache to post.If Minidump folder is empty use verifier tool to diagnose wrong drivers read here:http://www.vistax64.com/973966-post8.html

33 more replies
Relevance 69.29%

Each time I boot my computer, I receive the follow message in the Event Viewer System Log File:

The following boot-start or system-start driver(s) failed to load:
KmxAMRT

Here is the information that I see when I sent it to the Microsoft Support and Help Center

Product:Windows Operating SystemID:7026Source:Service Control ManagerVersion:5.2Symbolic Name:EVENT_BOOT_SYSTEM_DRIVERS_FAILEDMessage:The following boot-start or system-start driver(s) failed to load: %1

What I believe is happening is that all though I uninsulated CA's Anti virus package and installed Microsoft's Security Essentials, not all the CA software was removed.

Help in getting rid of this problem would be greatly appreciated.

Best regards,

Larry

Answer:[SOLVED] The following boot-start or system-start driver(s) failed to load:

Hi

See this document:
Uninstall failed

Select the correct CA product you had, download the Removal script and run.
Hopefully this will remove the CA Suite from your PC.

2 more replies
Relevance 69.29%

Hi all,
I have a problem with Vista Business.Naimly, every time I start the computer and look up into the computer menadgement/event viewer/administrative events it has an error msg:
The following boot-start or system-start driver(s) failed to load: i8042prt



-
System










-
Provider







[ Name]
Service Control Manager






[ Guid]
{555908D1-A6D7-4695-8E1E-26931D2012F4}






[ EventSourceName]
Service Control Manager









-
EventID
7026







[ Qualifiers]
49152










Version
0










Level
2










Task
0










Opcode
0










Keywords
0x80000000000000









-
TimeCreated







[ SystemTime]
2007-08-27T15:56:02.000Z










EventRecordID
26753










Correlation









-
Execution







[ ProcessID]
0






[ ThreadID]
0





















-
EventData






param1
i8042prt
I think this is regarding my video card (Gygabyte Nvidia 8600GTS) drivers?!But the card works pretty normally and the drivers are up to date.
Anyway there are also a lot of other error & warninig msgs regarding the volsnap and security update installation files.Maybe this due to the situation that I have installed both Vista and XP and there is a common problem with Vista working with XP/other and that is NO RESTORE POINTS... Read more

Answer:The following boot-start or system-start driver(s) failed to load: i8042prt

Problem Solution The following boot-start or system-start driver(s) failed to load: i8042prt 1.Go to Start > Run and put regedit.exe  and click  Ok 2.Navigator to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters in Registry Editor 3.Add a new REG_DWORD "Headless " and set the value to 1 4.Reboot the server. Regards,

18 more replies
Relevance 69.29%

I checked through the Event log in Administrator tools.
I got the following error: The following boot-start or system-start driver(s) failed to load: BANTExt

What is it?

I googled BANTExt and found out it's BelArc Advisor. Is it true?

How do I stop this error?

Answer:The following boot-start or system-start driver(s) failed to load: BANTExt

Yes, BANText.sys is the Belarc Advisor system driver file.It is started automatically from a Run, RunOnce, RunServices, or RunServicesOnce entry in the registry everytime Windows starts.To prevent the error you would need to find and remove that entry in the registry.

11 more replies
Relevance 69.29%

Apparently, I am one of many who seem to be having this issue. And just like everybody else, I turned to Google for some answers. Here is my scenario (perhaps gregrocker could point me in the right direction?):

I am running on a laptop with the following specs:

Dell Studio 1735
32-bit Vista Home Premium, SP1
Intel 2 Core Duo, T8100 @ 2.10 GHz
250 GB SATA HDD, 5400 RPM
4 GBs of RAM
256 ATI Mobility Radeon HD 3650
8x Slot Load CD / DVD Burner (Dual Layer DVD+/-R Drive)

I downloaded the .iso image of Windows 7 through the software program at Penn State and burned it to a DVD. When I restart my computer and boot off of the DVD drive, I get the Windows 7 Installation interface. As the setup begins, I get an error message that says "Load Driver" across the top of the window, and says "A required CD/DVD Drive Device Driver is missing". I tried a few things to circumvent this issue:

1. I swapped out the installation CD with one of the CD's that came with my laptop that contains all of my device drivers. It found one compatible driver for the ATA/ATAPI Controller, and despite selecting it and hitting next, it didn't work.

2. I took the service tag from my laptop, downloaded each and every driver that it's associated with, burned it to an .iso, and swapped THAT out when I tried to install. Again, nothing happened.

3. I mounted the .iso onto an 8GB Cruzer and made a bootable flash drive. Upon trying the install again, I had the same problem.

4. I tried to bu... Read more

Answer:Load Driver: Required CD/DVD Drive Device Driver: HELP!

Try extracting the ISO to Vista desktop to run Setup from there.

You can locate the driver in Vista's Device Manager SATA controller Driver info tab.

The fact that it would duplicate the error for USB flash install sounds like a malfunction.

Try removing 2 gb of RAM.

Check BIOS version to see if you have the latest.

Checksum the HASH of the ISO you downloaded to confirm it here: http://www.mydigitallife.info/2009/0...vd-iso-images/

9 more replies
Relevance 69.29%

hello there i am doug  i am having a problem with Ndis2 Driver in the device manager it has an exclamation on it and when i into it it says it can not load the device driver so i tried to upgrade it but then it says the best driver is already installed so i am confused please does anyone have any good ideas??  please if possible email me direct to [email protected]   thank you

Answer:Ndis2 Driver unable to load device driver

Right click the offending device in Device and select Remove.Make sure beforehand you have the correct driver.Re-boot and re-install the driver and you should be good to go...

9 more replies
Relevance 69.29%

The following boot-start or system-start driver(s) failed to load: i8042prt Any ideas?  Thanks in advance.  - Larry  -----------------------------------------------------------Lenovo 3000 H210 Desktop, Windows Vista Home Premium 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

More replies