Computer Support Forum

Acer crystal web cam application is not showing

Question: Acer crystal web cam application is not showing

Acer crystal web cam application is not showing
Hi every one!
Previously I was using Windows 7 Home Basic and at that time web cam application was showing.
But now I formatted my laptop and installed windows 7 ultimate.
I installed every driver but still I didn't get acer crystal web cam application, I also searched a lot but all in vain.
I checked its driver and its working properly.
Please help me to get back that application.

Relevance 100%
Preferred Solution: Acer crystal web cam application is not showing

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Acer crystal web cam application is not showing

I got the solution on acer.com I downloaded acer crystal webcam application from there.

1 more replies
Relevance 70.52%

I have the Acer Aspire Notebook 5734Z-4725. I have had the black screen with the USB sound going off. I've been getting a pop up saying I can use a faster port but close it because I don't know about ports and don't want to screw up my computer and the pop up notice saying the camera is in use. I have deinstalled/reinstalled the driver. I have also done a system restore on the computer which set it back to factory settings that didn't work. As far as I can tell it is the same driver. Sometimes it seems to be working fine like the video will work but this is very rare and if I move my computer it puts my webcam back to a black screen. My webcam doesn't work with skype, ooVoo, msn, yahoo nothing.please help i'm so tired of it not working it has been like this over a month i have been on the internet for hours looking for a solution.

Answer:Acer Crystal Eye Crystal webcam isn't working

Do you have a recovery option to reinstall the driver. Note : This image is on a Sony Vaio laptop but more likely similar.Make sure you choose the similar feature if available and not use the restore to factory default as shown.

1 more replies
Relevance 63.14%

Hi, I hope someone can help, the crystal eye webcam on my Acer 6930g has stopped working, I dont know what I have done, it was working fine. Now when I try to start it up a box appeers saying:

Acer crystal eye webcam.EXE - unable to locate component
Thisapplication has failed to start because Image.dll was not found. Re-installing the application may fix this problem.

I have tried re-installing application but still keeps coming up with same box.

This is a real pain as I am now unable to skype my son who lives with his mum. Please Help
 

More replies
Relevance 63.14%

Hi everyone I'm at my wits end! I cannot get my webcam to work. I have tried numerous options posted in different forums and on websites but nothing seems to work. Even when I went to the Acer update driver search site. When I added my model number I got about a dozen driver options but as soon as I put in my OS Windows 7 (64 Bit) it came back with no drivers. I've noticed in a number of forums that peoples webcams where working fine in Windows XP but when they updated to Windows 7 they lose the ability for their computers to find their webcams. Is this an inherent problem with Windows 7 and is there anyway to fix it short of buying an external webcam. Surly there must be a way to get it to work !!!
Regards Brett.

Answer:Acer Crystal Eye Webcam will not work on Acer Aspire 5560

Hi Brett ... Welcome to Seven Forums ... Does the Webcam show in the Device Manager ? ...

Do you have any errors in the Device Manager ...?
Have you tried the Cyberlink WebCam Application 1.0.1523 23.6 MB ? ....

4 more replies
Relevance 61.5%

Hello,

I have an Acer Extensa 5420 computer and the operating system installed is Vista.

I'm having trouble with the Crystal Eye's picture-taking. I turn it on (works just fine) but when I click the "take picture" button, it briefly shows up in the gallery bar underneath and disappears. I can't for the life of me figure out where it is sending them or why they are not staying in the gallery below the pictures like they used to. I can't find any way to adjust or figure out where they are being sent to.

Thanks for any help ,
Sasha
 

Answer:Acer Crystal Eye Web Cam for a Acer Extensa 5420

On my Acer, the webcam pics are saved to the Pictures folder in my user account folder.

If they aren't there, I suggest you try re-installing the webcam driver. You can download it from Acer's website. Select the appropriate website for your country here: http://www.acer.com/worldwide/support/
 

2 more replies
Relevance 61.5%

I had to have a recovery of my hybrid because of viruses and although most of my files and apps were there afterwards, Acer Crystal Eye wasn't, although it was originally on the hybrid. How do I get it back please as it's very good definition, much better than the camera on Windows 8.

Answer:Acer crystal eye lost on Acer W510

download from here

6 more replies
Relevance 59.45%

Hi, I have a Sapphire ATI Radeon x1950GT 256MB on Windows XP Service Pack 3 and I am not having much luck.I am sure that it is just a setting I need to change, or something I need to do, but I don't know what it could be.I played Saints Row 2 first, and was really upset that it wasn't running properly, but I played need for speed shift after and it was the same, so I think there is either something broken, or something needs to be changed.The crystal textures if you are unaware are a bit like thishttp://www.crystalinks.com/crystalsmexico.jpgthey are pointy at the ends, and contain textures within (illegible though)I had a mess around inside the saints row 2 settings, and changing the resolution gave me a bit of breathing room, and I thought it was fixed until I turned around and there it was (in game turn around, quite quick, maybe that info helps)I hope it isn't the card, I will try an older game to see if the card just isn't powerful enough to run saints row 2 and shift (although it exceeds the min. requirements)I hope someone can help.

Answer:ATI X1950GT showing crystal all over the place. Any ideas?

try to use high resolution if u didn't .

7 more replies
Relevance 58.63%
Question: Acer Crystal Eye

I have an Aspire V5-571P-6648 and have Windows 8.1.  My webcam doesn't work wth Acer Crystal Eye.  However, it does work with the Microsoft Camera app.  Does anyone have any advice?

Answer:Acer Crystal Eye

I think Acer Crystal Eye is only usable for taking pictures and videos and saving them in your pictures file.For streaming videos (incoming), however, it will depend on the app being used to open your webcam.

2 more replies
Relevance 58.63%

hey my computer has been formatted and after is process my web cam stop working
what should i do to get my web cam operational again
the cams name was Crystal Eye so help me to remedy this problem plz
 

Answer:Crystal Eye Web cam, Acer

Go to Acer support website...enter your model and download the driver for it...install and restart PC.

http://support.acer-euro.com/drivers/downloads.html
 

2 more replies
Relevance 58.63%

Hello,

I don't know why my built in acer crystal web cam doesn't work anymore. I check the device manager and the application and I can't find it. Is there a way that I can put it back or download it from the net?

Jojo

Answer:Acer Crystal Eye web cam

Hi, jojoa73, and welcome to the forums.

If the camera is not showing up in device manager, then you'll need to figure out *why* it is not showing up there as a device.

To start off with, what have you done recently to your computer? Have you recently recovered from an infection on the computer? Have you changed settings on the computer? What OS are you running? Is every thing up to date (in terms of drivers and software updates)?

3 more replies
Relevance 58.63%

I have an Acer Travelmate 5520 with the Crystal Eye web cam. I havent used it (but it was working originally)and when I did want to use it I received the message "camera not found". In Device Manager there is no heading for Imaging Devices. I have downloaded updated drivers but the problem seams to be recognising the hardware.As with all things it is just out of warranty!I cannot find anything on any sites to help solve the problem.Does anyone have any ideas??many thanksJimbo

Answer:Acer Crystal Eye Web Cam

A whole month and not one reply, this is most dissapointing!! Nobody with any ideas then?I have downloaded two sets of drivers, Suyin and Bison, but don't know which is the correct one but in any case neither one seems to make a difference.I would be grateful for any response.Many thanks.

2 more replies
Relevance 58.63%

Hi,
I just installed windows 7 in my acer 4730z and the crystal eye web cam did not work. how can i resolve the problem? Any help...?!!.

Answer:Acer crystal eye web cam

  
Quote: Originally Posted by roi


Hi,
I just installed windows 7 in my acer 4730z and the crystal eye web cam did not work. how can i resolve the problem? Any help...?!!.


Try this link
Service & Support

1 more replies
Relevance 58.63%

When I click on my Acer Crystal Eye icon, it shows the initial screen but about 2 seconds later, goes back tothe desktop screen. I can't take pictures or videos because of this.

Answer:My Acer Crystal Eye is on and off

tigerclaw99,
 
Sorry to hear you're having webcam issues, could you provide us with the unit you are using so we can help try and narrow this down for you?

1 more replies
Relevance 58.22%

Aspire E14 (E5-473G-32HE) did not come with Acer Crystal. It only have a webcam that can not be turned-on. I checked driver and it shows only HD Webcam Installed correctly. Yet can not be turned on and the turned on settings can not still turn on the camera. LINE and Skype says "camera canot turn-on". The ridiculus part is, acer driver support does not even support the camera hardware. I cant find a webcam in their driver list downloads.

Answer:Re: Using Acer Crystal Eye Webcam

zeexui,
 
There should be a driver listed under the imaging devices section of the Device Manager. Try removing the driver and restarting to let the operating system reload it.

3 more replies
Relevance 58.22%

I have gone everywhere, done everything to get my built-in eycam to work in Windows 7. As a matter of fact, it never worked in Vista. There is nowhere that I found ( and I know how to google) where I can get this thing to work. Therefore, I hope you guys and gals can give me a better idea on how to make my eyecam work ( at least marginally). It's not the biggest deal in the world, but it should at least work if it is part of my laptop. Appreciate any ideas or suggestions. Thnk you much,

Al

More replies
Relevance 58.22%

Right, I'm not really all that good with the technical side of laptops, so I was wondering if anyone could help me with a problem I have.
My laptop has a built in webcamera, it works if I go onto the Acer Crystal Eye Webcam programme, yet when I'm on MSN or Skype, it doesn't work.
I'm able to see myself, but it fails to connect and just says, ' The webcam session has ended '
Does anyone know of a way I can resolve this?
Bearing in mind, I'm 15, so I'm not completely familiar with all computer techinical talk.
Any help is appreciated, Many thanks,
Lauriana.
 

Answer:Acer Crystal Eye Web Camera.

11 more replies
Relevance 58.22%

I can't find the driver for my model Acer. My laptop is the Aspire M5-583P, but when I check the list of available driver downloads, I don't see any for the Crystal Eye.

Answer:Re: Using Acer Crystal Eye Webcam

In this case, check if your Windows Update is set to automatic downloading and installing updates. If it is not set already, it is recommended to allow Windows to automatically download and install updates. Keeping Windows up-to-date can resolve most of the errors you may face with device drivers and other areas. To know more about this, the following link can be helpful:http://windows.microsoft.com/en-us/windows-8/windows-update-faq You can also try the following steps if the above option does not work:1. Right-click 'Start' and go to 'Device Manager'.2. Check if your webcam is listed under the list of devices.3. If yes, then click on it and go to 'Drivers' tab.4. Check if you are able to update the drivers from here.5. If the drivers are not able to update from here too, you can consider using the option of 'Roll Back Driver'.If the issue still persists, you are advised to contact Acer through the following link for further assistance:http://us.acer.com/ac/en/US/content/contacts Hope this will help you.

1 more replies
Relevance 58.22%

Ok so I googled around and such, nothing but people asking about it and no help. Ok so it does work, on stuff like msn. Now normally on xp it showed the camera in my computer. It does not. The last time I had w7 on this it was rc2 and bsod'd. Seems fine now, but still the cam problem. Is there anything I can do? Maybe a program that can take it over? Really looking for drivers for w7 for it. The model of laptop should not matter as my moms emachines and my Acer aspire ONE both have the same acer crystal eye cam and the same drivers worked, doesn't show for either of us. Drivers for mine only exist for XP but worked fine. Hers have vista but still not showing in my computer.

Again it does work on msn so its not as if its not working period.

Answer:acer crystal eye drivers

The cam probably won't ever show in My Computer. It is not recognized as a network location or storage. This is normal, and nothing to worry about. Try going to Control Panel>Devices and Printers instead.

7 more replies
Relevance 58.22%

I just got a acer aspire one with the acer crystal eye camera. I can't figure out how to use it and I have been unable to find a tutorial/ Would anyone know where to find one?

Answer:acer crystal eye camera

the

did you install a driver for it yet? is it working, but you just dont know how to use it?

10 more replies
Relevance 58.22%

Noob here. So it seems that the built-in webcam on my acer extensa 5230e doesn't like windows 7 drivers. (apparently a long history here)

My particular problem is that the camera shows up in device manager and reads as working normally. However there is no program/application I have used that will allow me to use the webcam. I keep getting messages of 'no camera found' or 'plug in camera'.

I just want to know if this is a driver or hardware issue? I have no idea which brand the camera is (chicony or suyin). I purchased the machine used. It was returned to factory condition when I purchased it. Windows is 100% up to date, drivers and all.

Any help is greatly appreciated.

Answer:Acer crystal eye vs. windows 7

It would be a driver/app issue.

Have you tried installing / running the software in either XP or Vista compatibility mode?

9 more replies
Relevance 58.22%

I'm having trouble with my crystal eye webcam on my acer/aspire 5250-0810 it wont work.

Answer:acer crystal eye webcam

  
Quote: Originally Posted by man2


i'm having trouble with my crystal eye webcam on my acer/aspire 5250-0810 it wont work.


you install its driver?

1 more replies
Relevance 58.22%

I have reloaded a dozen times and no matter what I do the app eventually crashes. I have seen it discussed on other forums and nobody seems to have a grasp on this one. I am running Vista Home Pro on an
Acer extensa 4420 w/dual athlon 1.9 processors, 2 gigs of ram and an
ati graphics/chipset. The "EYE" runs on an enhanced pci to usb port, it depends on ffdshow to work as well, but I have not been able to find which ffdshow specs are correct for the camera.

So far,
wrong ffdshow codec, no "EYE"
too many USB connections, no "eye" (keyboard, mouse, and external HD)
Acer's original install driver and app "no eye"
Acer's updated driver and app "no Eye"

Does anybody have a clue about this?

Please help.....frustration level is high. Everything else works well and this laptop is quite fast...too bad that Acer doesn't seem to care. I sure won't buy another ACER product.
 

Answer:Acer Crystal Eye Webcam

try going in to device manager and uninstalling its driver and then install the latest one http://download.cnet.com/Acer-Crystal-Eye-webcam/3000-2110_4-188685.html
 

2 more replies
Relevance 58.22%

Hi All,

I updated my ACER Aspire One 751 with Windows 7 HOME Premium. So far the system is running. Only the webcam gives me a lot of trouble.
It was crystal clear while using Vista Home Premium, but now I have a fuzzy display, see attachment.
Using the program or yahoo messenger can open the WebCam, with SKYPE I have only a black screen.
I installed the latest driver for the Cam - nothing
I ran a compatibility test - result the Cam is incompatible
I contacted the Support of ACER - waste of time, no reply at all

Is anybody able to give me a hand to run my cam again ?????


HELP !!!!!!
Thanks for all you guys posting threads in the forum

Volker

Answer:ACER Crystal Eye and Windows 7

Have you tried reinstalling in compatibility mode?

9 more replies
Relevance 58.22%

my cam was working fine. every once in a while it would seem fine but I'd have a black screen instead of an image. restarting usually would work. now even if I restart it keeps coming up black. any ideas?
 

More replies
Relevance 57.4%

I'm having problems with my Acer webcam and dont know how to fix it. I've tried installing the cam driver from this site and it still doesn't work. What am i doing wrong?

http://www.acerpanam.com/synapse/fo....com&siteid=7117&areaid=2&formid=3394#results
 

More replies
Relevance 57.4%

I have a computer with a built in crystal eye web cam from acer. It recently stopped working, so I downloaded the driver online, but the web cam still won't work. When I click on the shortcut, the window pops up, but no picture, and the green light that should turn on beside the cam doesn't turn on. Thanks
 

More replies
Relevance 57.4%

I HAVE A PROBLEM IN DOWNLOADING THE ACER EYE CRYSTAL WEBCAM . Y HAVE A LAPTOP - ACER ASPIRE E1-572 . PLEASE ASSIST ME IN DOWNLOADING THIS APPLICATION !!! Spoiler (Highlight to read)

Answer:I have a problem in downloading the acer crystal ...

Dharmasiri,
 
Which operating system are you running right now?

2 more replies
Relevance 57.4%

I have just bought an acer aspire 8920 with a built in crystal eye web cam. It originally had vista premium on it but as it was bought in Spain it was in spanish so I upgraded to vista ultimate to get it into english. Everything is working fine except my webcam.

I used to be able to use the īcamera controlsīin the control panel of the webcam but now these controls are all greyed out and the picture is very grainy.

I have re-intalled all the lastest drivers and software I can find and still nothing works. I have restored all the system using the eRecovery system and checked it whilst it was still in the spanish vista premium state and still it didnīt work properly.
Can anyone help in restoring this back to its original condition.
 

More replies
Relevance 57.4%

I HAVE A PROBLEM IN DOWNLOADING THE ACER EYE CRYSTAL WEBCAM . Y HAVE A LAPTOP - ACER ASPIRE E1-572 . PLEASE ASSIST ME IN DOWNLOADING THIS APPLICATION !!! Spoiler (Highlight to read)

Answer:I have a problem in downloading the acer crystal ...

Dharmasiri,
 
Which operating system are you running right now?

2 more replies
Relevance 57.4%

Need image.dll for Acer crystal eye webcam

Answer:Need image.dll for Acer crystal eye webcam

Did you visit Acer support site for the download of the camera software ?Pls see this. Pls click on Notebook, then on Aspire, then on Aspire 7736z. There you are.CoolGuy

2 more replies
Relevance 57.4%

I have an Acer Aspire 7551G-7606 and recently had to replace my HDD and used one from my old HP laptop (it had the same version of Windows 7 Home 64x and I registered it with the Acer's serial). When I went to Acer's site to download the drivers I needed, the webcam software that originally came with the computer gave me an error upon the install setup saying that it couldn't recognize/find the webcam and asked me to plug it in. It's kind of perplexing since the webcam is physically built into the laptop. Is there some reason why replacing the harddrive would make the software unable to find the webcam and is there a way to fix it so I can actually reinstall it? Thanks.

Edit: The webcam does show up in the DM as "1.3mp HD Webcam" and it says that the driver is up to date and that it's functioning properly.
 

More replies
Relevance 57.4%

Hey

My webcam was working strange so i uninstalled it and was hoping to find it to redownload on acers homepage or somewhere else but i only find the drivers and not the file so i am very desperate to get it back. Any ideas where i could download "Acer Crystal Eye Webcam" again?? i need it . Please help me

Webcam - Version 1:5:2008:00
Product - Acer ASPIRE 5745
SNID - 02401012725


I need it back.Please Help me!!!

Answer:How do i get my acer crystal eye webcam back???

Nidhi I don't know if this will help it is the only link I can find for the application itself the driver is no problem
Acer Crystal Eye Webcam - Free download and software reviews - CNET Download.com

4 more replies
Relevance 57.4%

I am getting a security warning that this software update is blocked: ACER.1.5.3501.22428_AVC121031-01. Shall I proceed or heed the warning and not update?

Answer:Update to Acer Crystal Eye Webcam

Same problem here

1 more replies
Relevance 57.4%

I have an Acer Aspire S3 with Windows 7.

My Crystal Eye web cam's image has horrible horizontal lines running through it and crashes if the resolution is not set at 1280x720. I cannot adjust it higher or lower without it crashing.

When I try to use the web cam with Skype I get up to 1 minute of talk time before it crashes on me. When I use it on Google Hangout I get about 3 minutes before it crashes.

It is under warranty and I have tried contacting Acer's tech support. They assisted me with uninstalling and re-installing the drivers as well as doing a factory reset, none of which had any effect. I sent it in to them, according to the report sent back, they re-installed the drivers again and sent it back saying it was fixed.. but the problem was still there. I sent it to them a second time, they did nothing and reported that the web cam functioned fine, although it is still clearly having issues. I am going to contact them again, but I was hoping someone else might be able to help since their tech support has proven to be incompetent.

I am at my wits end. Any help/suggestions you could give me would be greatly appreciated.
 

More replies
Relevance 57.4%
Answer:hi im lenh please help me to install acer crystal ...

https://acer.custhelp.com/app/answers/detail/a_id/33971/~/why-is-there-no-windows-8%2F8.1-camera-dri...The problem with this is the store has nothing.the camera is Bison and Lenovo uses it  in some laptops.You can try this onehttp://support.lenovo.com/us/en/downloads/ds032431   and http://support.lenovo.com/us/en/downloads/ds031749   Uninstall the driver in Control Panel/ Programs and Features and reboot before installing another one.

1 more replies
Relevance 57.4%

Hi all,

I've only just got my new laptop and I thought i'd test out the webcam on it.

It has a Crystal Eye made guy Acer built in but I've come across an issue.

It seem that when i record a video the sound isn't sync'd up and it also seems he video is playing faster then it should be.

I've tested it a few times and noticed that the sound wouldn't start at the same time as the video playback but then the motion in the video was actually faster then it should be.

Anyone got any ideas?

Thanks
 

More replies
Relevance 56.99%

How are you guys?
I'm having a problem with my notebook Acer Aspire 6920 since i installed my Windows 7....
The camera driver doesn't work....( Acer Crystal Eye Driver Camera)

Does anybody had this problem? How did you guys solve this??

I tried already run as ADM.. but didn't work

I'm running a 64 bit OS

Thanks

Answer:Acer Crystal eye driver Issue Windows 7

  
Quote: Originally Posted by fabioguima


How are you guys?
I'm having a problem with my notebook Acer Aspire 6920 since i installed my Windows 7....
The camera driver doesn't work....( Acer Crystal Eye Driver Camera)

Does anybody had this problem? How did you guys solve this??

I tryed already run as ADM.. but didn't work

I'm running a 64 bit OS

Thanks


fab
Welcome to seven forums

have you tried the acer site for the camera driver?

Also could you fill in your system specs ( in usercp).

thanks

Ken

9 more replies
Relevance 56.99%

Dear Acer community, I recently baught an Acer Aspire Timeline U (Aspire M5-481TG) and upgraded it from Windows 7 to Windows 8 using the Acer Upgrade Assistant Tool. Now, my laptop does not recognize my webcam anymore. Neither the Acer Crystal Eye program (which I have also updated), nor Skype nor the Windows 8-default "Camera" will show me a picture. I have a device called "SPCA2082 PC Camera" listed in the device manager, which it claims should work. Thanks in advance for any help

Answer:Acer Crystal Eye Webcam does not work after upgrad...

I have also checked the Acer Website for drivers: http://www.acer.de/ac/de/DE/content/driversNon are available for the webcam.thedonpoe wrote:Dear Acer community, I recently baught an Acer Aspire Timeline U (Aspire M5-481TG) and upgraded it from Windows 7 to Windows 8 using the Acer Upgrade Assistant Tool. Now, my laptop does not recognize my webcam anymore. Neither the Acer Crystal Eye program (which I have also updated), nor Skype nor the Windows 8-default "Camera" will show me a picture. I have a device called "SPCA2082 PC Camera" listed in the device manager, which it claims should work. Thanks in advance for any help  

9 more replies
Relevance 56.99%

Hi,

I bought an Acer Aspire 5536 laptop just under a year ago, ive only just wanted to use webcam and noticed that it continuously freezes.
The problem isnt just on msn, but when i open up Crystal Eye Webcam from the Start button, it doesnt work in there either. Taking a picture is fine, but as soon as i start the video it freezes after a couple of seconds.

ive tried to update the driver, but it says that i have the best driver.
I'd really appreciate if you can help..

Thanks
 

Answer:Built in Acer crystal eye webcam freezes

6 more replies
Relevance 56.99%

the windows update for 7 went on automatically and restarted my computer while it was running.  so now the camera records but when I stop it a blank screen pops down on the bottom like nothing recorded at all.  plus its the screen where I delete it but it keeps coming back.   don't have any solutions.  I went to the device manager, stopped the usb ports to disable and enable, don't know why that hasn't worked.  it also says the device is working properly.  I uninstalled and reinstalled.  Now I tried to restore but now I know why people hate windows 7 because the it not the same restore like vista and theres no restore point.  I uninstalled again and now it works but not really sure because all the ones that appeared black were long videos over 12 hours.  I've never had that problem before.  So NOW it may work but not really sure until a long video proves me wrong.  Windows 7, Aspire V5-131 *****I went to the acer support and guess what? it doesn't recognize my serial numbers.  so how in the world am I suppose to contact them?***** anyone experience the exact same thing and knows the fix?  please help!

Answer:Acer Crystal Eye running while update, now black s...

Please try installing te webcan application Acer Cyberlink Webcam App.You also have the option to restore the webcam driver and application from Acer recovery management.You may need to enter the serial numbers in the correct wensite as per the country of purchase and it would be recognized. If you have a unit from US or Canada, you may also live chat with an Acer technician at : Acer live chatIf you have purchased the computer in any other country, you may contact Acer support here : Acer Global Support Click the Kudos to say ?Thanks? for helping! select "Accept Solution" if your issue is resovled.  

1 more replies
Relevance 56.99%

I have Aspire 5750 Laptop. Its running fine on windows 8.1 but there is some issue with Webcam ..The web cam runs but all the settings are disabled so the images are not clear. I am sure it is due to incorrect drivers. It shows 1.3 HD webcam in the device manager and drivers are provided by Microsoft Year 2006. I have googled to find the right driver for the webcam but none worked. I thought giving it a try to install win 7 drivers but I couldnt find the drivers for win 7 x64 even on acer's site. Please provide webcam drivers for Chicony Acer Crystal eye webcam for win7 x64 .

Answer:Chicony Acer Crystal Eye Webcam Drivers for Win 7 ...

CameraAcerWebCam Application1.0.121623.3 MB2011/01/12Download

1 more replies
Relevance 56.99%

hi...im running a windows vista home basic 32 on my acer aspire 4530. It has a built in webcam.All was fine when it just stop working.I usually use it on yahoo messenger.Device manager says its working properly.the drivers are updated.
But when i open acer crystal eye webcam, its says camera not found. when i use it on yahoo messenger,all i see i dark black screen.I hope someone can help me fix my webcam.Any help would be greatly appreciated.

deaddrop

Answer:acer crystal eye webcam stop working

Could you please Uninstall the Driver for the Webcam and then Restart your Computer

See the Attachment for more Details,
Josh

18 more replies
Relevance 56.99%

I had problem after update webcam firmware from Chicony CNF6041 to CKF7010 20090908 FW6322 v3.0.2.2-C. Now my webcam isn't working anymore only saw black screen. Is any1 here know how to restore back firmware to cnf6041 vid_04f2&pid_b026? ty b4

Answer:Acer Aspire 4315 Crystal Eye Webcam

Have you tried acer Recovery Mgt back to factory specs? Jack E/NJ

1 more replies
Relevance 56.99%

I have just successfully upgraded to Windows 10 but now the Crystal Eye Camera is only showing the top half of my head.  I have tried changing the aspect ratio but it is still the same. Is there any way one can change the angle  without tipping the screen forward which is impracticable. Hoping someone out there has some suggestions.

Answer:Acer Z3605 how to change angle of Crystal Eye Came...

Haze,
 
Since you did not physically adjust the camera it sounds like a driver issue. I would suggest removing the drivers and letting them get installed again to see if that resolves it.

3 more replies
Relevance 56.99%

so i have a acer aspire 6920g and i just reformated and reinstalled all the drivers but the program that acer has for the webcam doesnt detect the webcam i have reinstalled and uninstalled vista does detect the driver for the webcam and has no problem installing the driver any suggestions?
 

Answer:Acer crystal eye webcam program problems

Hi, make sure you have installed the Chipset driver and rebooted then try this camera driver. These are direct links from the Acer site.
 

13 more replies
Relevance 56.99%

hello,
I have an Acer Aspire 4530 running on Windows Vista Home Basic 32.Its built in webcam was all running fine when only yesterday it stop.Sometimes it says camera not found,or all white or all black.I tried updating the drivers and the application at acer support but still it didnt solve the probelm.I mostly using it on yahoo messenger version 10.
I hope somebody can give me advice or help me fix it.Help would be greatly appreciated.

deaddrop
 

More replies
Relevance 56.99%

My acer aspire5742 crystal eye webcam quit.How do I fix it?

Answer:My acer aspire5742 crystal eye webcam quit.How do ...

Hi,Go to Device manager, expand Imaging Devices, right click webcam and check whether the driver is the latest.Threre's a solution here:http://community.acer.com/t5/Legacy-Laptops-and-Netbooks/Crystal-Eye-Webcam-not-working/td-p/93589

1 more replies
Relevance 56.99%

Ok, so I upgraded my OS with a student discount from Windows 7 starter to Windows 7 Pro. I have an Acer Aspire One A0532h netbook I bought right around a month ago and upgraded about two weeks ago. Before the upgrade, my webcam worked just fine. Now I am unable to even locate the files for the webcam anywhere! Even when I do a search on the whole computer, nothing comes up. It is an integrated webcam. I tried going to the acer support website where I specified my exact computer, model, and such and downloaded all three setups for the webcam but they all had the same error; something along the lines of "no camera detected" or "no camera is plugged in". I dont understand. If anyone could help me, it would greatly be appreciated. Thanks.

Answer:Acer Aspire Crystal Eye Webcam Driver

Just proceed to the Acer website to download the app
Link provided


Service & Support

9 more replies
Relevance 56.17%

Whenever I try to connect webcame, a mesage is shown, "can not access the webcam. plz plug in your webcam and try."Plz I need your help badly! 

More replies
Relevance 56.17%

Hi
I can open the webcam, take pictures and also start to record a video, but when I stop the video it says its not responding, so I have to close it with task manager. After when I reopen it the video is there, but every time I try to video it does the same. The sound is there but distorted?

I ran a compatibility test and the result is 'Incompatible Application' ???
I tried to update the drivers and it said it was up to date.

Any help with this?

Thanks.
Neil

Answer:Acer Aspire 5738z crystal eye webcam not responding

  
Quote: Originally Posted by jonesnewton


Hi
I can open the webcam, take pictures and also start to record a video, but when I stop the video it says its not responding, so I have to close it with task manager. After when I reopen it the video is there, but every time I try to video it does the same. The sound is there but distorted?

I ran a compatibility test and the result is 'Incompatible Application' ???
I tried to update the drivers and it said it was up to date.

Any help with this?

Thanks.
Neil


Hi

Follow the links on the screen.

3 more replies
Relevance 56.17%

I recently purchased an Acer Aspire 150-1570, and have been very happy with it ...until today.

The PC comes with a built-in webcam, Acer's "Crystal Webcam". Haven't had any problems with it.

I'm running Windows XP Home and recently did a windows update.

Today, however, when I went to use it, I immediately got a "Blue Screen of Death" from Windows, with the following Stop error:

0x0000007E
0xC0000005
0xEC171B86
OxEBFCF9FC
0xEBFCF6F8

snp2uvc.sys - Address: EC11A90B base at EC111000 Datestamp 47009ae

This is one of the driver files for the crystal webcam
dated 5/16/08 v5.8.33.1

Thinking that this was a driver problem, I uninstalled the device and reinstalled the latest version of the driver which I downloaded from the ACER website. That didn't cure the problem. I then tried to restore the driver back to the original driver version that came with the PC when I bought it - same result. So, now I'm kind of stumped.

Any suggestions would be appreciated.

RadioActive1

"No birds or animals were harmed by this post, however, a number of electrons where severely inconvienced!"

Answer:Acer Crystal WebCam causing Blue Screen

you most likely downloaded the wrong driver, and yes that would make you get a bsod, to be absolutely certain ask costumer support which drive is for that exact webcam

http://www.techspot.com/vb/all/windo...R-FAILURE.html

4 more replies
Relevance 55.76%

Hello!
I bought a secondhand Acer Aspire 5310 and I reinstalled all the drivers except the driver of the webcam, I found three drivers of the webcam in Acer website I installed them all, but the webcam doesn't work. there's also an unknown device that I don't know what it it.
I'm running Windows 7 professional 32 bits

Answer:Can't find the Crystal Eye Webcam driver for Acer Aspire 5310

Hi ... Have checked the Acer Website there are only Vista Drivers available for your Model ...

Select the unknown Device right click select Property's ...
Post any Information you see under the Details Tab please ...

9 more replies
Relevance 50.02%

I tried updating driver error: The Acer Crystal Eye Webcam has not found? Please plug in the Acer Crystal Eye Webcam and then run installation again. How on earth do I do that?
 

More replies
Relevance 47.97%

Hope that some one can help me I have 4 workstations running XP SP2.
When I run the install it stops at the updating component registration
screen. Internal error 2908 is the first screen i get. I hit OK and get the
next screen which reads error 1935 a error occured during the installation of assembly CrystalDecisions.Enterprise.Desktop.Rtf versions=11.0.3300.0 Culture=neatral PublickeyToken=692fbea5521e1304 Please refer to Help and Support for more info HRESULT:0x8002802f. Any ideas would be appreciated.

Thanks
 

Answer:Crystal Reports Runtime install errors - Crystal Reports 9

you need to give us more details. what program are you installing?

check this out: http://support.microsoft.com/?kbid=299777
 

2 more replies
Relevance 47.56%

In my application submenus developed using xml is not showing in IE7. But it is showing in IE6. I am looking for solution. Provide ur help in this post

Answer:In my application, xml submenu is not showing in IE7

Expand-on-mouseover submenus not working in IE7 (CSS)

1 more replies
Relevance 47.15%

Hi,
I am trying to find the folder C:\Documents and Settings\<my name>\Application Data\Microsoft\Templates so that I can add my own templates folder with data but this folder isn't showing in the normal place. Microsoft Office is showing under Programs but this isn't the default location to add my own folder.

Can anyone help me, please?
 

Answer:Solved: Application Data not showing

6 more replies
Relevance 47.15%

Please help. I'm going insane.

Why, when I hit Alt+Tab, does any application show more than once on the selection pane?????


Please see the attached .jpeg for better explanation.


Thanks in advance!!

Answer:Alt+Tab Switcher Showing More Than 1 Option for the Same Application!!

Anybody?

9 more replies
Relevance 47.15%

Ever since I upgraded to Windows 10 the icons of all my desktop applications do not show themselves in the start menu. They instead show a "white folded corner page" icon. If I was to pin the icon to the taskbar the correct icon would show. If I pinned to my desktop the correct icon would show. I couldn't find anything to solve the issue anywhere else so I figured I would ask.
What should I do?

More replies
Relevance 47.15%

I was told to try another sim but dont have one so how do I stop the phone saying sim application

More replies
Relevance 47.15%

i installed frozen free fall app on on my lumia 620 (8.1 OS). It was showing in my apps list & in games also. I updated app as on 24/11/2014. After updating its not showing in my apps list. Also not showing in storage sense To open app i have to search (in Cortana) it shows me open app and then it runs.Which means app is installed. When i search in store this (frozen free fall) app show me options i.e. VIEW and SHARE. Tapping on VIEW the phone exits store & shows apps list, but the app is not available.I have tried restarting phone, update software. scan for memory card, no use.

Answer:Application installed on Lumia 620 (WP8.1) not showing: how do I fix?

Have you tried uninstalling and reinstalling the app?

3 more replies
Relevance 47.15%

I have a pre-loaded shopping application called Wizlink in my computer. I would like to uninstall it but it doesn't show up in the Uninstall utility in Control Panel. Has anyone heard of Wizlink? I would like to know whether simply deleting it without knowing what the associated files are and if they are going to cause any problems.

I have an HP and this program was pre-installed and linked to a couple of shopping shortcut icons also preloaded on my desktop (eBay etc).

Why can't the Uninstall utility find this pesky program, as I would much rather use an uninstaller than simply delete the program?

Any advice?

Answer:Application not showing up in Uninstall utility

Hi use revo uninstaller the free version should do Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

5 more replies
Relevance 47.15%

So in Windows 7, whatever applications you have pinned to the start menu sometimes have a triangle facing out, and if you click on that triangle, it will show the recent documents you've worked with that application. As the title says, there is one application that just won't show the list no matter how many times I click on the triangle. However, other applications DO show that list. How is it that only one application is causing trouble while others aren't?

Answer:Recent documents for an application not showing up

Hello Kyle B -
>> if you click on that triangle, it will show the recent documents <<
Is this related to M/s Office, Student, or a similar App ?? I fail to see this on my Windows 7 Home Premium desktop.
A screen shot would help -

Thank You -

2 more replies
Relevance 47.15%

So uh, as you can see from the screenshot of my desktop and taskbar (blacked out 2 shortcuts do to them being revealing), some of my desktop icons do not show like they normally would apparently. The ones with the white paper with a window on it are the ones i'm talking about. The ones on the taskbar are Skype (left) and MSN (right).

Uh, anyway to fix this??

Answer:Application Icons not showing their symbols?

Hello Cyanide,

Do the shortcuts still work?

You might see if rebuilding the icon cache may help.

If not, then you might see if creating new shortcuts for them directly from the program's .exe file may display properly.

Hope this helps.

3 more replies
Relevance 46.74%

Hello,

Well as you can see in the screenshot Vuze is running, up 5 times apparently!

It isn't obviously, and I can only right click on the icon on the lower right, but this is annoying. Any ideas of how to resolve it?

Answer:Application showing up five times in the system tray

Yes, I have been getting the same thing happen to me on occasion.
Chrome seems to be pretty good at this!

A minor annoyance that will go away on it's own eventually.

1 more replies
Relevance 46.74%

Every once in a while I get a message box that appears when I'm using Outlook. It says:

"Another application has the switch identities or indentity login dialog showing. Choose one identity in that dialog before launching this application again."

I can't find any dialog box open anywhere but the applications I have open (browser and Outlook 2003) start acting kludgy and sometimes the system locks up. Even Task Manager will lock up and not respong. The only way I can get out is to pull the plug.

Any ideas or fixes would be much appreciated.

Wildbill2u

PS: I'm using Maxthon browser, XP Pro and Outlook 2003 as part of Office Professional Edition.
 

More replies
Relevance 46.74%

Hi friends
I was trying to install "Recovery tool" to roll back my windows 10 for phones to windows 8.1 but when am trying to install it showing an error with 0x80070005 access denied .
I tried in many computers other than me but same error... Pls help me

Answer:Showing access denied when installing an application?

Run the installer as Administrator would be my first thing to try.

2 more replies
Relevance 46.74%

Hi everybody,

I installed XXAMP on my windows home premium laptop.
Now i want to remove it but the application is not showing in start run appwiz.cpl / remove programs menu
I know i can remove the folder and all shortcuts but this is not a proper way i guess
I there anyway for me to be able to see this application in all programs so i can remove it correctly ? Or should i just remove the folder and clean my registry after?

Thanks in advance for any tips

Answer:Application not showing up in remove programs menu

In cases like that, I usually try this one

Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

or this one

http://www.filehippo.com/download_ccleaner/

-DG

7 more replies
Relevance 46.74%

I recently deleted the game 2048 from my computer. I enjoyed it, but I didn't see a way to reset my high score other than that; the high score that the game had was not my own (someone else had played the game on my computer and gotten that high score), and I wanted it to be my own. Anyway, I deleted it, but it's not showing up in the Windows Store, and I want to re-download it. Is there a way I can make it show up in Windows Store again?
There are other versions of 2048 in the app store, but I specifically want this exact one.
Thank you.

P.S. I have already restarted my computer, and it did not fix this.

More replies
Relevance 46.74%

I'm currently working with a client who frequently uses an application that is located on a mapped drive on their server. Every time that their computer starts up, the icons on the desktop show as broken until they go to My Computer, go to their T:\ and browse the directory, then it'll show up as a working shortcut on their desktop. At first I remapped the network drive and checked the box next to "reconnect at logon" to see if that would help, but it they still have to click on the actual mapped drive from within "My Computer." Is there a way to maybe create a batch that will perform this action when they start their computer. Say a "net use" command which will remap the drive every time they start the computer and then have it do a "dir" within the T: once it's connected. It's been years since I've really worked with DOS commands, as I'm typically working with Linux and Basic Windows XP, 7 applications, so I don't really recall how to set up a batch job like that.

Answer:Mapped Drive Application Not Showing up on Startup

Hi

How about something like:


Code:
net use t: \\PCName\ShareName
dir t:
Copy to a file and save as "Run_Me.bat" (Or something)
Put it in your startup folder.

Note "NET USE" will also depend on the use of user names and password
You might have to use

Code:
NET USE T: \\PCName\ShareName "Password" /USER:UserName

2 more replies
Relevance 46.74%

So this is really hard to explain so maybe my image will clear any confusions. Btw when Im talking about windows Im not talking about the OS Im talking about the applications like Google Chrome window, file explorer window, etc. So my problem is when I move a window from one place to another (like in the image) it only shows the outline. Before it didnt do that. Maybe I touched something and now I dont how to change it.

Answer:Application windows only showing the outline when moving

Oh they still have that feature?

Show Window Contents or Outline While Dragging - Windows 7 tutorial

it should still apply.

2 more replies
Relevance 46.74%

I recently deleted the game 2048 from my computer. I enjoyed it, but I didn't see a way to reset my high score other than that; the high score that the game had was not my own (someone else had played the game on my computer and gotten that high score), and I wanted it to be my own. Anyway, I deleted it, but it's not showing up in the Windows Store, and I want to re-download it. Is there a way I can make it show up in Windows Store again?
There are other versions of 2048 in the app store, but I specifically want this exact one.
Thank you.

P.S. I have already restarted my computer, and it did not fix this.

Answer:Deleted Application not Showing up in Windows Store?

Under your downloads on the MS store there's a refresh icon/button I'm sure, try that.

5 more replies
Relevance 46.33%

Anyone can give me some advice about XP home taskbar showing 2 icons but only 1 application is running? it just keep doubling the icons every time I open a program.

Thanks,
 

Answer:XP home Taskbar showing 2 icons but 1 application is running

Have you opened Task Manager (to open it left click the taskbar and select it) and made sure that only one copy of the application is running?
 

3 more replies
Relevance 46.33%

One of the applications I use shows Chinese and Japanese text in jumplist as squares. This is happening only on one computer. I tested it on some several other (32 and 64 bit) computers and it is showing everything correctly. The computer that it is not working correctly is running 32bit version of Windows 7 Ultimate. All computers are running English version of windows 7.

What can be the reason of the strange behavior? How can I fix it?

Answer:Application jumplist not showing Chinese and Japanese text

As you have Windows 7 Ultimate, have you tried downloading the japanese and mandarin language packs?

2 more replies
Relevance 46.33%

I'm having a strange issue, don't know how this happening but it show online even after i have closed the application. Is there something wrong with app or phone settings.

More replies
Relevance 46.33%

HI I was wondering if anybody knew of a way to show a particular app on all virtual desktops. I have a password manager that interacts with any window that requires a password and I dont want to have to move it every time I have a window that requires access to it. I like my applications separated into separate desktops as it is now, but a few applications I need to see on every desktop. Is there a way to do that?

Answer:Windows 10 Task View: Showing a specific application on all VD's

trinsic said:

HI I was wondering if anybody knew of a way to show a particular app on all virtual desktops. I have a password manager that interacts with any window that requires a password and I dont want to have to move it every time I have a window that requires access to it. I like my applications separated into separate desktops as it is now, but a few applications I need to see on every desktop. Is there a way to do that?



In Task View, right click on an application:

5 more replies
Relevance 45.51%

A have some applications that are running under start-up folder on windows 7 and 10, but when i check them under msconfig , those are not showing up. Any ideas?
Best Regards,
Naren Nadh

More replies
Relevance 45.51%
Answer:Wp application deployer showing...install path not found in registry..... What to do now???

Same here!

1 more replies
Relevance 45.1%

Hello.I Need Acer Application That Missing From My Netbook..I Have Reinstall My Netbook Because My Hard Drive Has Been Broken.My Father has bought  New Hard Drive With 500 GB..And I Need Acer Application That Come With My Netbook.One More,Why Acer eRecovery Say "Can Not install : 1. Bootable fILES" WHY IT SAY LIKE THAT?? MY SYSTEMOS:WINDOWS 7 PROFESSIONAL 32 BIT (6.1 , BUILD 7600)MODEL:ASPIRE ONE D270RAM:1 GBPROCESSOR:INTEL ATOM N2600 @1.6 GHZ (2 CPUs)GRAPHIC:INTEL GMA 3600 SERIESHDD:500 GB SORRY FOR MY BAD ENGLISH..TELL ME IF I MISS SOMETHING HERE..PLISS GIVE ME THE URL FOR THE APPLICATION THAT COME WITH ASPIRE ONE D270 NETBOOK..THANK YOU FOR YOUR HELP OR COMMENT OR REPLY..










Solved!
Go to Solution.

Answer:Missing Acer Application

Hi,Thats good to know, but Acer apps are not available to Download online, except E-Power Management for some models,. Most of the apps are Preinstalled from the factory,.

7 more replies
Relevance 45.1%

Hello.I Need Acer Application That Missing From My Netbook..I Have Reinstall My Netbook Because My Hard Drive Has Been Broken.My Father has bought  New Hard Drive With 500 GB..And I Need Acer Application That Come With My Netbook.One More,Why Acer eRecovery Say "Can Not install : 1. Bootable fILES" WHY IT SAY LIKE THAT?? MY SYSTEMOS:WINDOWS 7 PROFESSIONAL 32 BIT (6.1 , BUILD 7600)MODEL:ASPIRE ONE D270RAM:1 GBPROCESSOR:INTEL ATOM N2600 @1.6 GHZ (2 CPUs)GRAPHIC:INTEL GMA 3600 SERIESHDD:500 GB SORRY FOR MY BAD ENGLISH..TELL ME IF I MISS SOMETHING HERE..PLISS GIVE ME THE URL FOR THE APPLICATION THAT COME WITH ASPIRE ONE D270 NETBOOK..THANK YOU FOR YOUR HELP OR COMMENT OR REPLY..










Solved!
Go to Solution.

Answer:Missing Acer Application

Hi,Thats good to know, but Acer apps are not available to Download online, except E-Power Management for some models,. Most of the apps are Preinstalled from the factory,.

7 more replies
Relevance 45.1%

Hello.I Need Acer Application That Missing From My Netbook..I Have Reinstall My Netbook Because My Hard Drive Has Been Broken.My Father has bought  New Hard Drive With 500 GB..And I Need Acer Application That Come With My Netbook.One More,Why Acer eRecovery Say "Can Not install : 1. Bootable fILES" WHY IT SAY LIKE THAT?? MY SYSTEMOS:WINDOWS 7 PROFESSIONAL 32 BIT (6.1 , BUILD 7600)MODEL:ASPIRE ONE D270RAM:1 GBPROCESSOR:INTEL ATOM N2600 @1.6 GHZ (2 CPUs)GRAPHIC:INTEL GMA 3600 SERIESHDD:500 GB SORRY FOR MY BAD ENGLISH..TELL ME IF I MISS SOMETHING HERE..PLISS GIVE ME THE URL FOR THE APPLICATION THAT COME WITH ASPIRE ONE D270 NETBOOK..THANK YOU FOR YOUR HELP OR COMMENT OR REPLY..











Solved!
Go to Solution.

Answer:Missing Acer Application

Hi,Thats good to know, but Acer apps are not available to Download online, except E-Power Management for some models,. Most of the apps are Preinstalled from the factory,.

7 more replies
Relevance 44.69%

Owing to up-dates put on my comp, which corrupted my laptop , it had to be taken back to factory settings, & now My camera doesn't work ,which is combined in my comp. Can anyone give me a link of what to do, & how I can get my camera working. I had to have all programs put back on my comp at a cost of $358 by buying Acers software that comes with the comp when bought. It seems the software for my in-built web cam wasn't included. Thank You.

Answer:My Web Cam is not showing or working on my Acer A...

You can check if you are able to download your webcam drivers through Windows Update. To know how to do this, refer to the guidelines mentioned on the links below:For Windows 8.1:http://windows.microsoft.com/en-us/windows-8/all-driversFor Windows 10:http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-upd... If you are still not able to download webcam drivers, you are advised to go back to Acer support for further assistance. Hope this will help you.

1 more replies
Relevance 44.69%

Hi, being a silver surfer I am not very aufait with computer language, but need help with my Acer V 5 which on restart showed hibernate on the screen and has been doing so for 24hrs.!Even when switched off then back on,it still won't do anything else. Has anyone else experienced the same problem and if so how does one solve it. Any help gratefully appreciated

Answer:Hi,my acer v5 just keeps showing that it's hiberna...

Try holding the power button down for 10 seconds to completely shut down the system. Once the system completely shuts down, you should be able to power it back on and it should boot normally.





Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

1 more replies
Relevance 44.69%

I tried this a couple times with a couple different apps but get the same results.
I have two applications (WAMPmanager and speedfan) that, when started, put an icon in the tray. I scheduled tasks to run at startup for these two applications and did a reboot.
WAMPmanager and speedfan both start (although it takes quite a while), but neither produce the icon in the tray.
I have also tried putting app shortcuts in the start folder (shell:startup) but neither would start.
1. Is there something special I need to do to get the icons in the tray when I start the apps at windows startup?
2. Is there some reason it takes around 30 seconds to hear my fans start to slow down (meaning speedfan has started)? In windows 7 they would slow down immediately.

More replies
Relevance 44.69%

I can not get an application for my laptop. Attempts so far have failed. Windows 10 has put a driver in for me that I assume works, but I can't get any stand alone web cam application to work. Please help me. I can not get Acer Chat to work.

More replies
Relevance 44.69%

As there is no left and right mouse key as such you use the 'application key' however everytime I use it, it simply crashes the laptop.  I get the whirling blue circle and then a 'not responding' message.  It is running on windows 10.Any ideas on how I can fix this, bearing in mind that I am not a computer geek!  Thanks

Answer:Acer ES 15 - Application key crashes laptop

jbarber,
 
Would you elaborate a little more on what problem you are having, I am unsure of that the application key is.

6 more replies
Relevance 44.28%

I have had this laptop (Win10) for about 6 months and only use it for emails and storing my photos - I have about 1000 emails stored without attachments in Thunderbird and 950 photos. No videos or music stored yet...........

I keep getting a message to the affect that my free space is very low. I am elderly and do not quite understand but I went into 'my pc' and it says '5 gb free out of 93gb'! When I had occasion to look a couple of months ago it said 40gb free.

Someone told me to look in C drive and see if there were any large files but I did not know how to do this - something about cmd box - I am lost and wary of doing anything complicated.

Why has it suddenly got to this state? I have done nothing unusual in the last few months except twice the laptop slowed right down and kept freezing recently and I tried to restore it to a few days earlier and it took an hour before it finally worked but said something like ' did not restore all files' however it did cure my problem and the laptop speeded up and was ok - I had to do this twice.

Does it matter I only have 5gb free and will my laptop stop at some time? What, in simple terms can I do please? At the time of the last freeze and attempt to restore I lost my Avast and had to repair it if that means anything.

Help anyone and thank you.

More replies
Relevance 44.28%

Acer Care showed a critical BIOS V1.10 update so I started it and it is still showing as updating hours later! Does anyone else have this problem and have they solved it?  It is still showing as BIOS V1.03 in the system info. Help please?!













Solved!

Go to Solution.

Answer:Acer E15 BIOS V1.10 still showing as updating

Problem solved as I was able to download the BIOS file from Acer and reinstalled it!  

3 more replies
Relevance 44.28%

New to the forum, so I hope I get this right. I have an Acer Aspire laptop running Win 7 Home Premium. When I go to websites and try to log in, the keystrokes for the username show, but nothing happens when I try to type in the password. These are sites I regularly visit. Suggestions?

Answer:Website passwords not showing on Acer with Win 7

Hi have you tried other browsers?

6 more replies
Relevance 44.28%

hi, i bought this acer laptop aspire 5333 a month ago and it was working perfectly ,and two weeks ago i intsalld the new windows 8 preview, and it was working perfectly and three days ago in was repairing files and i thought the laptop has frozen since it was taking long so i forced it to switch off by press th power switch for 5minutes, and whn i tried to switch it on again it started to restart itself just after displayng the Acer log and says press f2 to enter setup but even if u press th f2 button nothing respond and it automatically restart again so i have to remove the battery for it to stop this, anyone with an idea on hw i can fix this+

Answer:laptop restarting after showing the Acer log

The Windows 8 Preview is intended only for test purposes at present. It isn't even at the beta stages yet so it will have many bugs and issues. Consequently, you are supposed to install it only a spare testing machine, not a new computer that you depend on to work properly!You don't even know if your new laptop is compatible with Windows 8 for god's sake,Put the original version of Windows back on it & it should be okay. Acer will not repair it under warranty if it goes wrong and you've changed it's operating system.

5 more replies
Relevance 43.87%

how can I fix my pc it keep restarting and doing the same thing over and over again the error is 0xc000000d at location 0x10061489 plz help me

Answer:Acer eRecovery management application error

There's a vague possibility this might unstick it:Turn off and disconnect from domestic power. If it's a laptop remove the main battery too. Now hold the power off/on button down for about 20 seconds. Re-assembly and see if it helps. At least it's easy to try.Always pop back and let us know the outcome - thanks

2 more replies