Computer Support Forum

.jpeg not listed in default programs

Question: .jpeg not listed in default programs

Having problem with graphics not showing up in email (Windows Live and Thunderbird). I have tried at least ten suggestions from internet but no help. Found that .jpeg is not listed in default -- is this a problem and/or how do I make it show?

Relevance 100%
Preferred Solution: .jpeg not listed in default programs

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: .jpeg not listed in default programs

Hi Potomac, Welcome to Seven Forums.

You could try restoring the default file association - Default File Type Associations - Restore

Regards,
JDobbsy1987

2 more replies
Relevance 75.44%

I have Microsoft Office installed, and I want to use Outlook as my default client, but every time I try to click a mailto link, it always bring up Windows Live. When I try to select Outlook as default from the Default Programs list, it's not even on the list. It also isn't listed in the Associations. I've tried repairing my Office installation, and it's still not showing up. I have it checked in Outlook to be default, but that doesn't seem to do much. How can I get Outlook on my Default Programs list?

Answer:MS Outlook not listed on W7 Default Programs

They didn't include it. Use another email client or use the live mail that came with it.Playing to the angelsLes Paul (1915-2009)

15 more replies
Relevance 74.62%

I'm trying to change my default FTP client back to Windows Explorer after an accidental Chrome installation changed it to Internet Explorer. I've been told this can be done by going to Default Programs > Set Associations. However, FTP is not listed under Protocols, and there doesn't seem to be any option for adding a new protocol or file extension.

I tried entering
Code:
assoc FTP=
in the command prompt, but it did not help. Is there a way to a new protocol without messing with the registry editor?

I'm sure the solution is very simple, but I can't seem to figure it out for the life of me. Any advice would be greatly appreciated.

Answer:FTP not listed under Default Programs > Set Associations > Protocols

  
Quote: Originally Posted by ixfd64


I'm trying to change my default FTP client back to Windows Explorer after an accidental Chrome installation changed it to Internet Explorer. I've been told this can be done by going to Default Programs > Set Associations. However, FTP is not listed under Protocols, and there doesn't seem to be any option for adding a new protocol or file extension.

I tried entering
Code:
assoc FTP=
in the command prompt, but it did not help. Is there a way to a new protocol without messing with the registry editor?

I'm sure the solution is very simple, but I can't seem to figure it out for the life of me. Any advice would be greatly appreciated.


When do you want the default ftp-client to start? When someone clicks or enters ftp://whatever.com ? Is that what you mean? If that's what you mean..... it's not a file association at all! It's a protocol

4 more replies
Relevance 74.62%

I have two machines on which Office 2010 is installed, but neither of them lists Word, Excel etc in the default programs. Word, Excel etc are also not listed under the RegisteredApplications registry key.

Machine 1: Windows 7 HomePremium 64bit. Originally had 64bit version of Office2010 installed but later reverted to 32bit version so could sync with 32bit laptop. Default file associations seem to be fine and Office Programs appear in "Open With" list but they do not appear in the Default Programs list.

Machine 2: Windows Vista Home 32bit. Recently installed Office 2010 (was using Open Office 3.3) but Office programs did not appear in the Default Programs list and default file associations was not set (e.g. .doc files opened with Open Office). Ran Fix-it to uninstall and then reinstalled Office 2010 but no change.

Can anyone give me the registry entries for Office 2010 so it appears in the default programs list? Or tell me how to uninstall / reinstall / fix reg entries?

PastorMike

Answer:Office 2010 not listed in default programs

FWIW; I have office 2010 Pro and the only program that shows in the default programs list is outlook 2010.

All file associations appear to be correct too.

Missing file association has obvious impacts, but just out of curiousity; what [negative] impact are you experiencing as a result of not having the office suite listed under default programs?

There is a way to add them, apprently, using this program: Default Programs Editor

as suggested on this thread: Add a program to the list of Default Programs?

hth
Tanya

9 more replies
Relevance 73.8%

In Win7 the following method works perfect and chrome is listed as one of the default programs. In win8 it is not listed, but the assosiation of filetypes worked. I also can choose chrome (in my case Google__Chrome__Portable) where one can set the so called "computer standards".

So I think there are some more reg entries I have to set in W8. Please help ;-)

I register them with this .bat

Code:
rem @ECHO OFF
echo ---------------------------------------------------
choice /c yn /m "Save regkey first ?"
if %errorlevel% equ 2 goto reg_rights
@echo on
@echo.
REG EXPORT HKEY_LOCAL_MACHINE\SOFTWARE\Classes\InternetShortcut\shell D:\sources\PC\registry\internet_shortcut_org_%computername%.reg
@ECHO OFF

:reg_rights
cd /d D:\sources\PC\registry\setacl

echo ---------------------------------------------------
choice /c yn /m "continue to change ownwer and rights ?"
if %errorlevel% equ 2 goto change_reg

rem S-1-5-32-544 steht f?r Administrators=Administartoren = die Administratorengruppe, 545=usergruppe https://support.microsoft.com/en-us/kb/243330/
setacl.exe -on "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\InternetShortcut\shell" -ot reg -actn setowner -ownr "n:S-1-5-32-544"
setacl.exe -on "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\InternetShortcut\shell" -ot reg -actn ace -ace "n:S-1-5-32-544;p:full"
setacl.exe -on "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\InternetShortcut\shell" -ot reg -actn ace -ace "n:S-1... Read more

Answer:portable chrome or firefox not listed as default programs

The only way I figured to use portable versions is to install the full version, then set it as default, and then you can use the portable version which Windows will detect as default, and use it like normal when opening links. There is no way to set a portable version as a default browser.

1 more replies
Relevance 73.8%

As you can see, the title states the issue.
When I open my list of default programs, my MS Office 2010 is not listed.

Does anyone know why and how I can ADD MS Office to my list of programs??

Thanks !!!

Listed Green

Answer:MS Office 2010 installed but not listed in my default programs

had the same problem, but with the beta version.

anyway, there are some who claim that they have to do it manually, depending on which version of office you installed, 64 or 32, will depend to which folder your exe's are in.
here is the 32 version:
C:\Program Files (x86)\Microsoft Office\Office14
the 64 is the same, but without (x86).
here is a quick summary how to do it manually:
Right click on a document in Windows Explorer and then select Open with and then click on the Choose default program and browse to C:\Program Files\Microsoft Office\Office14 and then located and click on the WINWORD.EXE item and set that as the default application to be used.

9 more replies
Relevance 66.01%

iTunes drives me nuts in many areas but this is the latest. Every time I start iTunes, it says it is not the default audio player and to go to "Default Programs" to correct it. Opening "Set Default Programs" shows that iTunes is NOT there.

I've tried setting mp3, mp2, etc., files to open with iTunes in "Associate file type with a program" but that doesn't get rid of the "not the default audio player" popup when starting iTunes. I have uninstalled and reinstalled iTunes, does not fix.

My iTunes also does not have any CD burner icon under "Edit>>Preferences" like it shows in Apple Help forums...geez, now there's an oxymoron: "Apple Help" !!!

I am running Windows 7 (64bit)
 

Answer:iTunes not listed in "Set Default Programs" Win7

I haven't used iTunes in a long time, but I remember being able to turn off the alert you're getting. If it's just the alert that's getting to you, try that.
 

2 more replies
Relevance 63.14%

My friend wants to Save a Picture in MS Paint as a File Type JPEG but it is not listed when she clicks on the down arrow for File Types. She is using Windows 98.

I also use Windows 98 and in MS Paint, JPEG File Type is listed as one of my options.

Can you help her with this problem. I gave her your web address and she will be registering with you.

I await your response.

Thank You.

Richard
 

Answer:JPEG File Type is Not Listed in MS Paint

http://support.microsoft.com/?kbid=193354
 

2 more replies
Relevance 62.32%

Hi, running windows 8.1 and i use 3 browsers, my main (default) is Opera, the issues i have are opera is set as default browser in opera settings, but for instance when checking emails say overclockers uk i see something catches my eye, i click it and link opens in opera, not in win 8.1, it pops a box up asking how do you want to open this type of link, firefox, google chrome or look for app in dam app store
http://i601.photobucket.com/albums/t..._19_58_883.jpg

i go to setup default programs to set associations and guess what, opera is not in the list
http://i601.photobucket.com/albums/t..._20_48_995.jpg
all help well appreciated

pc setup
window 8.1 pro n x64
i7 4770k
msi z87-gd65 gaming mobo
8 gig 2x4 xtreem lv 2133 xmp
msi gtx 770 gaming
ssd's n so on

Answer:Opera browser set as default issue - not listed in default

It is in mine:



I have Opera set as default in all 3 settings.

Perhaps reinstall Opera ?

19 more replies
Relevance 59.45%

Hi, I went to set a program as a default and I saw these 2 browsers icons I had but I uninstalled them and the shortcuts are still there so how can I remove them? Thanks in advanced

Answer:Icons in Control Panel\Programs\Default Programs\Set Default Programs

Uninstall your browsers using Revo Uninstaller. Use advanced mode.

4 more replies
Relevance 58.22%

It began when I was browsing and out-of-the-blue a popup saying "HDD Failure - etc. etc. We recommend you restart your machine" came up, it looked legit so I checked out my PC to see some desktop items (not all) had dissappeared. Naturally I restarted machine and went on my normal user;

- my desktop was completely black and their were no icons, their were only a few programs listed in all programs aswell.

- A program called "Windows XP Fix" was running, it was obviously false software, I managed to delete its root (i think) from All Users / Application Data / 01032483.exe (or something)

- A program called browser+ was in my All Programs which it let me uninstall.

- If i go to a different user there's desktop icons and i can use my browser (still limited All Programs though) but if i click on a link it sends me to different web pages like canadasasquach.com or matalan.com (lol?) it's really messed :/)

Stuff is attached I appreciate your help <3
- Axel

.
DDS (Ver_2011-06-23.01) - NTFSx86
Internet Explorer: 7.0.5730.13 BrowserJavaVersion: 1.6.0_24
Run by Mum at 2:48:22 on 2011-07-09
.
============== Running Processes ===============
.
\??\C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
\??\C:\PROGRA~1\AVG\AVG10\avgrsx.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\SCardSvr.exe
C:\WINDOWS\system32\netdde.exe
C:\WINDOWS\system32\msdtc.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\aspnet_state.exe
C:\Program Files\WI... Read more

Answer:No Desktop icons or programs listed in All Programs, random false sofware viruses ++

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

One or more of the identified infections is a backdoor trojan/rootkit.

This type of infection allows hackers to remotely control your computer, log keystrokes, steal critical system information, and download and execute files without your knowledge.

If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.

Please refer to Microsoft's Online Safety article for tips on creating a strong password.

Do not change passwords or do any transactions from the infected computer until it has been cleaned.

------------------------------------------------------

If there are any personal files, pics, etc. on your computer you cannot live without, back them up now just as a precaution.

Emergency Backup Procedure - Tech Support Forum

-----------------------------------------... Read more

16 more replies
Relevance 58.22%

I have been noticing some ridiculous lag that occurs at seemingly random times. It's not as bad as it was before I ran malwarebytes; however I still get random spikes of lag. Usually when this happens I see certain programs in the task manager that I almost never see. They are listed below:

dllhost.exe *32 (multiple instances)
dpnsvr.exe *32
dllhst3g *32
ctfmon.exe *32
NAPSTAT.exe
logagent.exe
msfeedssync.exe
wextraxt.exe
upnpcont.exe
rundll32.exe
 

Answer:Unknown programs causing HUGE lag and CPU usage (suspected programs listed in post)

Hello,

They call me TwinHeadedEagle around here, and I'll be working with you.

Before we start please read and note the following:

At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.

All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
I visit forum several times at day, making sure to respond to everyon... Read more

10 more replies
Relevance 58.22%

I'm running Windows 7 and a few months back had to remove Snap.do and some other unwanted programs.  I managed to get them off, I beleive.  I'm not sure, but I beleive I had to delete some folders to get them off fully. Subsequent Superantispyware runs did not report any unwanted programs.
This morning Avast alerted me Snap.do was back.  I opened a browser and confirmed the home page was hijacked.  Avast said it could remove it for me and when I looked, the home page was back and Snap.do wasn't on my list of programs in control panel>prorams and features.
I ran malware bytes and nothing too bad was found.  I ran Superantispyware and it reported regcleaner pro, Advanced Sysrem Protector and AppsHat Mobile Apps were installed.  I let the Super antispyware try to remove them and also cleaned out some tracking cookies.  I cehcked programs and the 3 weren't there.  Re-running Super antispyware however keeps reporting they're in my system.
Any ideas?  Was my original removal not successful?  Can these apps hide?

Answer:spyware scanner found unwanted programs not listed in programs and features

Hello Splungee, this one is a bit tricky.Please follow the instructions in THIS GUIDE starting at Step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it HERE. Please include a description of your computer issues, what you have done to resolve them, and a link to this topic.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.It would be helpful if you post a note here once you have completed the steps in the guide and have started your topic in malware removal. Good luck and be patient.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.

5 more replies
Relevance 58.22%

I'm running Windows 7 and a few months back had to remove Snap.do and some other unwanted programs.  I managed to get them off, I beleive.  I'm not sure, but I beleive I had to delete some folders to get them off fully. Subsequent Superantispyware runs did not report any unwanted programs.
This morning Avast alerted me Snap.do was back.  I opened a browser and confirmed the home page was hijacked.  Avast said it could remove it for me and when I looked, the home page was back and Snap.do wasn't on my list of programs in control panel>prorams and features.
I ran malware bytes and nothing too bad was found.  I ran Superantispyware and it reported regcleaner pro, Advanced Sysrem Protector and AppsHat Mobile Apps were installed.  I let the Super antispyware try to remove them and also cleaned out some tracking cookies.  I cehcked programs and the 3 weren't there.  Re-running Super antispyware however keeps reporting they're in my system.
 
Boopme kindly walked me through the DDS process and I'm posting the logs
I did post on another help site before knowing the rule of no posting elsewhere.  I closed that thread, so please do not shut this down.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.17126
Run by Valued Customer at 20:40:49 on 2014-06-27
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.8147.5962 [GMT -4:00]
.
AV: avast! Antivirus *Enabled/Updated* {17AD7D40-BA12-9C46-7131... Read more

Answer:spyware scanner found unwanted programs not listed in programs and features II

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/539247 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

10 more replies
Relevance 57.4%

I reinstalled Windows XP. For some reason, all of my old programs show up in Windows Explorer, but not in the Start Menu or in Control Panel/Add Remove Programs. Is there a way to fix this?

Thanks for any help.

Answer:Programs Not Listed in Start Menu Or Add/Remove Programs

Hey, i assume when you re-installed XP you attempted to keep your programs?

When re-installing XP i believe the registry is re-written, which would account for them being missing from the Add/Remove programs panel.

As for the start menu, star menu entries can be found in these two directories:

Code:
C:/Documents and Settings/All Users/Start Menu
C:/Documents and Settings/[Your Username]/Start Menu
i'm assuming they've been re-written too, if the programs still run then all you need to do is drag a shortcut to the main EXE into one of them folders, if they don't i suggest you re-install them.

Could you clarify how you re-installed XP? did you choose some non-destructive re-install(in order to keep your programs)?

Cheers,
Jamey

3 more replies
Relevance 57.4%

I reinstalled Windows XP. For some reason, all of my old programs show up in Windows Explorer, but not in the Start Menu or in Control Panel/Add Remove Programs. Is there a way to fix this?

Thanks for any help.
 

Answer:Programs Not Listed in Start Menu Or Add/Remove Programs

I would guess that you need to re-install all of them for them to do that,its just a guess,try it with one and see if it works .....
 

1 more replies
Relevance 56.17%

When I go to the Change or Remove Programs Button of the Add-Remove Programs window in the Control Panel, there are no programs listed at all. The window is totally blank. The list for the Currently Installed Programs is completely empty. Does anyone know how I can get my installed programs displayed so that I can delete a couple? Any reason why this would happen?

I have Windows XP.

Thanks for your help!
 

Answer:No programs listed in Add/Remove Programs Window

10 more replies
Relevance 56.17%

Some (3, out of maybe 20) of my installed Programs, all working perfectly well, are not listed in Control Panel -> Programs and Features.

Any ideas on how to rectify this, please?

Thank you.

Answer:Some installed Programs not listed in Programs and Features...

Some programs do not really "Install" by using normal installation process by writing entries in the Registry and so don't show up as uninstallable. "Portable programs" are an example. If they don't have Uninstall.exe (or similar file) in it's folder, you can just delete folder and shortcut.

3 more replies
Relevance 56.17%

When I go to the Change or Remove Programs Button of the Add-Remove Programs window in the Control Panel, there are no programs listed at all. The window is totally blank. The list for the Currently Installed Programs is completely empty. Does anyone know how I can get my installed programs displayed so that I can delete a couple? Any reason why this would happen?

I have Windows XP.

Thanks for your help!
 

Answer:No programs listed in Add/Remove Programs Window

10 more replies
Relevance 56.17%

When I go to the Change or Remove Programs Button of the Add-Remove Programs window in the Control Panel, there are no programs listed at all. The window is totally blank. The list for the Currently Installed Programs is completely empty. Does anyone know how I can get my installed programs displayed so that I can delete a couple? Any reason why this would happen?

I have Windows XP.

Thanks for your help!
 

Answer:No programs listed in Add/Remove Programs Window

Please don't post duplicate threads for the same problem.

Closing duplicate, Please continue with this here:

http://forums.techguy.org/showthread.php?t=267053
 

1 more replies
Relevance 56.17%

Some (3, out of maybe 20) of my installed Programs, all working perfectly well, are not listed in Control Panel -> Programs and Features.

Any ideas on how to rectify this, please?

Thank you.

Answer:Some installed Programs not listed in Programs and Features...

Some programs do not really "Install" by using normal installation process by writing entries in the Registry and so don't show up as uninstallable. "Portable programs" are an example. If they don't have Uninstall.exe (or similar file) in it's folder, you can just delete folder and shortcut.

3 more replies
Relevance 56.17%

Hello you really nice people. Since you have helped me on several occasions, I thought I'd try one more time.

I don't know exactly when it happened; however, at some point after I installed winXP as a dual boot and have been trying out some dvd burning software, I cannot add/remove programs in win2000... it states that "no programs are currently installed on this computer."

I have tried spybot (which found a few things and have been repaired)... I have tried Norton PC Doctor (which found a few things, all of which could not necessarily be repaired) and as a last resort I downloaded a freeware program Add/Remove Programs to get my program uninstalled.

In the midst of all this, I foolishly installed service pack 4 and then had to promptly uninstall it (I think it was a conflict with my video capture card -- got the blue screen of death at reboot [even in safe mode!!]). I was able to uninstall that because I had the good sense to back up and let it give me the uninstall option.

Any other ideas ??? I am going blind trying to follow the msn knowledge base suggestions checking the registry...

I don't know what information you need from me to try and help me out, so if you need any logs or stuff that I see other people post, please let me know how to capture that information for you as well... I'm pretty computer smart, just not really troubleshooting experienced... in other words, I just build em and learn as I go along.

For starters:

PIV 1.... Read more

Answer:Win2000 - Add/Remove Programs - No Programs Listed??

I'm bumping this up... I still have found no solutions... I've run Norton PC Doctor and WinDoctor... spybot... housecalls... I've reinstalled 2000 to repair and still no luck....

Someone out there has to know how to resolve this stupid error. I just know it's something simple that I don't know about... or as I always say... it's just something stupid... it almost always is.

Help please???????????

Patty
 

1 more replies
Relevance 56.17%

I have a program I would like to use for photos, PDFs, jpegs, tifs and pngs called "BlueBeam". When I try to use this program as a default, Windows will not list it or even give me an opportunity to search my hardware and select it. How do I fix that ?

Answer:Program I would like to use as default not listed

Originally Posted by vcmorris1


I have a program I would like to use for photos, PDFs, jpegs, tifs and pngs called "BlueBeam". When I try to use this program as a default, Windows will not list it or even give me an opportunity to search my hardware and select it. How do I fix that ?



Assuming your C: drive is your boot/Windows drive and assuming the program has been installed and assuming it runs on Win10, have you looked in C:\Program Files or C:\Program Files (x86) to see if it is listed there? The first Folder is for 64-bit programs and the second is for 32-bit programs installed on the 64-bit version of Windows. If having only C:\Program Files it is the 32-bit version of Windows.

1 more replies
Relevance 56.17%

I have a program I would like to use for photos, PDFs, jpegs, tifs and pngs called "BlueBeam". When I try to use this program as a default, Windows will not list it or even give me an opportunity to search my hardware and select it. How do I fix that ?

Answer:Program I would like to use as default not listed

vcmorris1 said:

I have a program I would like to use for photos, PDFs, jpegs, tifs and pngs called "BlueBeam". When I try to use this program as a default, Windows will not list it or even give me an opportunity to search my hardware and select it. How do I fix that ?



Assuming your C: drive is your boot/Windows drive and assuming the program has been installed and assuming it runs on Win10, have you looked in C:\Program Files or C:\Program Files (x86) to see if it is listed there? The first Folder is for 64-bit programs and the second is for 32-bit programs installed on the 64-bit version of Windows. If having only C:\Program Files it is the 32-bit version of Windows.

2 more replies
Relevance 56.17%
Question: jpeg default

I recently did an AVG scan and when it had finished, all my jpegs logos had changed to an expired trial program I had looked at (602 office suite). How do I change them back so they open in IE? OS is 98se. Thanks.

Answer:jpeg default

Which viewer do you normally use?Usually if you open that and set file associations to include jpegs,that does the trick.

10 more replies
Relevance 55.35%

I'm trying to copy my profile to the default profile on a laptop and I found that the default profile isn't listed as a choice. Anyone know why this is and how to fix it?
 

Answer:Solved: Default Profile not listed

You can't use the "User Accounts" tool to copy setting sover to the Default use since the default user is not really a user.

What are you trying to accomplish? Copying desktop settings to the default so everyone sees the same desktop?
 

2 more replies
Relevance 54.94%

So, I have these wireless headphones that I got from Brookstone. The device driver is called E-Core wireless audio. Its installed and ready, but it's not listed as a default playback device in volume control. How to fix?
It worked ok before. There's no driver to install on my wireless headphones.

Answer:One of my audio devices is installed, but not listed as a default dev

Apparently another device doesn't wanna show up either..

9 more replies
Relevance 54.94%

I read once years ago that there was no such thing as an audio DVD. The article explained why it couldn't be done. At that same time, I ran across free software said to burn audio to DVD. If I remember correctly, the software did not work.

I have hundreds of thousands of audio files. As a precautionary measure, I back up 'the best' of these files as data on DVD disks. I get a little over a thousand mp3s in each disk.

I wanted to switch default players using Autoplay. While attempting to make changes, I noticed that Autoplay lets you choose how Audio DVDs are handled. It uses the term 'DVD-Audio' So, evidently, that article I read years ago, was wrong.

My first question is, What format is used to burn an Audio DVD, as I'm guessing it's one that would never permit you to get a thousand mp3s on one disk?

My current default player is VLC. I wanted to change that to MPC-HC.MPC-HC is not listed in the options in Autoplay. I went to Default Programs>Associate a file type or protocol with a specific program. I set the DVD default player as MPC-HC. VLC is still used as the default player.

In Autoplay there are five options for each media type. With a limit of five, there is no room for MPC-HC. I'm wondering if I temporarily uninstall VLC, that would make room in Autoplay for MPC-HC. Should it?

I can open a Data DVD and view the mp3 files. I can right click on a file and in 'open With', choose MPC-HC. However, if I open a DVD movie and view the file and right clic... Read more

Answer:[SOLVED] Player Not Listed In Default Options

MPC-HC is Media Player Classic-Home Cinema a video player format not audio for Windows Media Player Classic, which VLC has a setting for those type of files.
MP3's are compressed audio files, so you can fit many more of them on a DVD then an actual Audio CD, which are uncompressed audio. If you are using a Set top player next to your TV, if it supports playing MP3, then you can play your MP3 discs.
Of course, you can play MP3 on disc, or on your computer with VLC or any other Media player.
Years ago, there wasn't an option for DVD-Audio (DVD-A) until Panasonic created it just recently. Of course your current burned DVD's of MP3s will not play in this format. This is a whole other file format, and your MP3's would need to be converted to this format and burned to this type a disc and have a optical player that will recognize this special type of disc for you to play it. The whole idea of DVD-A is an uncompressed audio file with full audio quality including all of the audio highs and lows far more then CD's.

7 more replies
Relevance 54.94%

In windows xp, what system dll contains the default icons for bmp, png, gif, and jpeg? Please help me figure this out, I have spend 45 minutes googling to no effect. I do not want links to online .ico files for them, I want to know the actual location of the windows .dll file that contains them already. Please help, thanks alot
 

Answer:Solved: where are default bmp png gif and jpeg icons?

I FINALLY found them! They're in shimgvw.dll. There's not a single resource on the internet I've been able to find that states that. So for all future searchers, here are some tags: "Where are image icons" "where is the png icon" "where is the bmp icon" "find image icons" "windows icon location" "default image icon" "default bmp icon" "default icon locations"
 

1 more replies
Relevance 54.12%

Hey everyone. I am trying to reset/find my DSL modem's password. Well, in order to do this, according to E-how, I have to know the number of the default gateway. So, I went into the command prompt and did all that the article said to do and lo and behold, the only thing next to default gateway is ::

What the hell is going on here???? I have a working Internet Connection as I am working from my computer right now! I can't figure this out. If anyone could please help me with this, I'd greatly appreciate. Anyway, I got some information from another related thread that I think you guys will need so here it is:

Command Prompt Log said:

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\AveMaria02>PING 206.190.60.37

Pinging 206.190.60.37 with 32 bytes of data:
Reply from 206.190.60.37: bytes=32 time=70ms TTL=54
Reply from 206.190.60.37: bytes=32 time=60ms TTL=54
Reply from 206.190.60.37: bytes=32 time=61ms TTL=54
Reply from 206.190.60.37: bytes=32 time=61ms TTL=54

Ping statistics for 206.190.60.37:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 60ms, Maximum = 70ms, Average = 63ms

C:\Users\AveMaria02>ping yahoo.com

Pinging yahoo.com [209.191.122.70] with 32 bytes of data:
Reply from 209.191.122.70: bytes=32 time=101ms TTL=56
Reply from 209.191.122.70: bytes=32 time=91ms TTL=56
Reply from 209.191.122.70: bytes=32 time=80ms TTL=56
Rep... Read more

Answer:I have no numbers listed by Default Gateway but I do have an internet connection

From the IPCONFIG /ALL portion of your listings:

Ethernet adapter Local Area Connection:
..
Default Gateway . . . . . . . . . : 192.168.1.1
Click to expand...

The IP address of your gateway (router) is 192.168.1.1 and
 

1 more replies
Relevance 54.12%

hi In my Add Remove Programs icon i have no programs listed, IS there something that can be done to do a go back, i tried a system restore but my computer cannot locate any restore point

Answer:There are no programs listed in my ADD REmove PRograms

How long did you let it sit for the list to populate ? ?

2 more replies
Relevance 54.12%

When I download from my card reader, it defaults to PhotoShop Elements 5.0. I would like to change the default to opening in My Pictures. I have Microsoft Vista and cannot find how to do this. Can you help me?
Thanks, Sharon
 

Answer:Changing program default for JPeg files

Welcome to the TSG forum.

I assume you want them to open in Windows Photo Gallery as your default viewer.

Right click on a image (the file type) you want to change ...
choose Open With >> Choose Default Program >> and browse to find Windows Photo Gallery.

Personally ..
I've replaced WPG with freeware Irfanvew as my default Viewer and Basic Image Editor.

In Irfanview's options .. You can tell it to be the default for all Images.
You can also tell Irfanview to make APE 5 the "extended editor"

Irfanview and Photoshop are the only two Image programs I use.
They play together very well.
 

1 more replies
Relevance 54.12%

Hi TSG'ers

Does anyone know a way to reset the default file type on a photo 'save' to jpeg whenever I need to.

Reason is, sometimes the file type automatically changes to BMP and doesnt give me the ability to change the filetype to 'jpeg' in the dropdown box.

I was wondering if someone knw a way either in the registry or at the folder level to lock this or reset it.

Thanks in advance

Dell p4 Dimension
Windows XP SP1
 

Answer:reseting photo folder default from bmp to jpeg

10 more replies
Relevance 53.3%
Question: Listed programs

Programs listed in Programs are different than programs listed on the Install/change window.
1. What are the differences in these two program listings?
2. What determines where a program is listed?
Thanks

Answer:Listed programs

Hello Moose,

The Programs and Features (Control Panel) window will only include installed programs that have a uninstall option. Most do these days though.

I'm not sure what location you mean with "Programs". If you mean the C:\Programs Files folder, then the programs that come with Windows 7 will not be listed in Programs and Features.

Please post back with more details on that location so we can take a look to see for you.

5 more replies
Relevance 53.3%

Hi -I have Vista Home Basic  32 bit.  I notice that when I go to Control Panel  - Programs and Features several programs are listed such as Adobe AIR.  When I go to "start" and "All Programs" they are not listed.  Should they be listed in "All Programs and what can I do about it?   Thanks    Bob

Answer:Where are programs listed?

Adobe AIR is not a program per se, so it's not listed in programs list.See here: http://en.wikipedia.org/wiki/Adobe_Integrated_RuntimeIf you're not a developer, you can safely uninstall it.

4 more replies
Relevance 53.3%
Question: no programs listed

althou there is programs on my computer and all work non of them show in programs and features through control panel and don't show either on cc cleaner help please
 

Answer:no programs listed

Have you tried downloading revo uninstaller http://www.majorgeeks.com/files/details/revo_uninstaller.html that could pick up your programs.
 

1 more replies
Relevance 53.3%

On my Vista, the programs listed in Programs are different than the programs listed in Uninstall/change ....
What is the difference between the programs in the two listings and what determines where a program is listed?
Thank you.
 

Answer:Programs listed on pc

12 more replies
Relevance 52.89%

Well, this has only started fairly recently .. If i right click a Jpeg, and click Open With, there's no option to open with Adobe Photshop, and also if I go 'open with>browse' and click the Adobe Photoshop.exe file, nothing happens whatsoever.. Does anyone know how to fix this?

- Going to 'set programme associations', also acts in the same way.. Adobe Photoshop doesn't respond whatsoever.

I'm running Adobe Photoshop CS4, Vista SP2. If that helps.

any help would be appreciated!

More replies
Relevance 52.89%

Hi, when I go to the add/remove programs in control panel, it only lists about 6 installed programs,does not go past 'A' ,adobe etc. Looking to uninstall some programs but cant see how if they are not listed. Any help most appreciated. Thanks Mike

Answer:add remove programs, not all listed

mikef90,what Os are you using.? Also what version of Internet explorer.?

6 more replies
Relevance 52.89%

In Programs and features there are some programs listed that when I try and uninstall them it says the program doesn't exist (which it doesn't, I probably deleted them manually), but can I stop them from showing in the Programs and Features list?

Answer:Programs Listed That Don't Exist

Use Windows Cleanup Utilityclick here

6 more replies
Relevance 52.89%

I used the Add/Remove Programs to uninstall several programs and they were and are, no longer showing in the Control Panel listing. I obviously thought they had been successfully removed. Whilst trying to find something else on my PC, using Start, right-click Explore etc, I found these same programs still listed. Can I just delete them again from this list and will they be gone for good then? And do you know why they are still listed at all if theoretically they are already uninstalled?

Answer:Uninstalled programs still listed

click here

6 more replies
Relevance 52.89%

I use Windows XP SP 3 on my 5 yr old HP laptop. There are 2 programs I no longer need. Casino Master and Masquee Casino Game Pack. Neither has built-in uninstall feature. They are not shown when I check Control panel/Add-Remove Programs.
Free version of Revo uninstaller doesn't show it either!
Windows Explorer/program files does not show them!
When I click Start/All programs/ Either software, it opens.

I believe they don't take much hard drive space. But, it is annoying that I cannot get rid of them.
What should I do without messing my computer?

Thanks for suggestions.
 

Answer:Uninstalling programs lot listed!!

7 more replies
Relevance 52.89%

.I have just installed program but when I went into all programs it is not listed,But when I go into control center then uninstall programs it is listed can someone explain it would not be listed in all programs.

Answer:Program not listed in all programs

You may have to turn the computer off and on again for it to appear. What's the program?

7 more replies
Relevance 52.89%

Hoping some one can assist... Just got my new Vista Ultimate x64 computer. I'm new to Vista and learned that the system sets up 2 program files: one for 64x bit and 1 for 32 bit programs. My issue is HP has loaded a whole slew of crapware and I want to clean it out... I can see it in the x86 files (as well as numerous shortcuts on my desktop) but I cannot find the programs in the add/remove program utility. I had CCleaner as well and they are not listed in there either.

Additionally, when I navigate to the programs I do not see any options to uninstall. Is there a way to get these programs sitting in the x86 folder to show up in my uninstall list?

Some examples of what I'd like to remove are:
Easy Bits for Kids
JunoPreloader
MSN toolbar
Netzero preloader
Online Services
Ebay

If I just delete these folders from the x86 folder they dont uninstall, correct?

any direction or assistance is greatly appreciated.. Thanks!

Answer:Uninstalling x86 programs: not listed

think I solved my issue.. I dont think the items in question are really installed.. they are trials so they just link in to the shortcuts. I deleted the shortcuts and removed the folders in the program list.. we'll see..

3 more replies
Relevance 52.89%

i downloaded a media player program which was a virus i managed to erase it but now programs are listed wrong , add/remove won't open , user account won't open , short cut iron are wrong there for not opening , my virus protection , is not being noticed ,so i get that you may not be protected warning , non of my search irons work , and i access the internet throw security center can any one help e--mail me at [email protected] when it first happen the computer said something about a windows 32 error but i can't remember the hole thing .

Answer:know programs listed in add/remove

Remove your email address or you will get increasing junk email forever. Never put it in open text on the internet unless disguised from spammers engines. We work on the forum not email.Try MalwareBytes freebie and see if that helps.Always pop back and let us know the outcome - thanks

2 more replies
Relevance 52.89%

I have backed up a friends data and used the dreaded red floppy to restore to factory settings. The Packard Bell software appeared to do this successfully and I then set about trying to remove various programs from add/remove. Virtually nothing was listed!For example Adobe Reader 5 is installed and working on the computer but doesn`t appear nor is it listed in All Programs. As basically all the preinstalled software. (Power DVD is listed in All Programmes but again not in Add/Remove)I`ve googled but can`t seem to find a clue - it sounds like a registry problem. Anyone experienced this before?

Answer:Add/Remove Programs Not Listed

The Add & Remove data is located in the registry & as you have reverted back to factory setting the registry no longer contains information regarding the programs that were installed after factory default. You could try re-installing the programs you want to remove & hopefully you should then be able to remove them.

4 more replies
Relevance 52.89%

My Windows 10 START button shows an alphabetical listing of programs on my PC, but some are missing - how come? Is there a way for Win 10 to display ALL of my executable files (including any that I've downloaded and installed) ?

For example, my vlc.exe program (from VIDEOLAN) is not under the "V" listing as I'd expected.

Answer:Win 10: not all programs are alphabetically listed

Mine have newly installed progs (must call them "apps" nowadays!) at the top, then "most used"... for goodness sake just list in alphabetical order, then we know where we are - or where they are

Microsoft are garbling things and hiding things and generally taking us backwards, grrrr.

I expect someone knows how to sort out the programs list, tho - I'm thinking of installing Start10 (or there's a similar one that's free), but not until I get this darn laptop completely set up for my needs.

17 more replies
Relevance 52.07%

I am curious about why programs on my work computer are not listed in the add or remove programs in control panel (XP). This has caused me a few problems in the pasts when I need to delete programs and had to find the software supplier on a website to give me an uninstall program. There are many programs not listed. e.g windows office
 

Answer:Programs Not Listed In Add/remove Programsr

9 more replies
Relevance 52.07%

Got a litle problem with missing programs under control panel/add/remove programs. there is also the issue that of those items listed, there is no remove feature to it either. I've checked my HijackThis log - thats fine, I've had a look at sfc /scannow and regedit to check the uninstal registry (no positive or negative values). Without doing a complete format (out of the question at the moment) and system restore not active (due to previous problems last week) i have NO idea.Can anyone help ?? Its got me stumped this one !!

Answer:Missing Add/Remove Programs Listed

Thought i should add - the only programs recently installed was my Motorola Phone Tools & related programs supplied - Avanquest

5 more replies
Relevance 52.07%

Hi, My OS is wondows 7. and I found out that there are only a few programs listed in my control panel/add remove programs.The programs are those that have been installed within the last 2 weeks.All the other programs installed before than that have been gone from the list.I don't know what happened.How can I have all the programs listed in add/remove programs?Thanks, J

Answer:There are only a few programs listed in add/remove prog

Also make sure you are logged in as administrator. If you use (preferred) normal user for daily use and many of the programs were installed as administrator or before you started using a limited user account, they may not show up unless you are logged in as administrator.Also when you look for restore options, not that you should have a 'button' to "Show More Restore Points". If you do, then you will be able to see all of your restore points.By default your system should reserve 12% of your disk space for your restore points. Less than 8% (unless you have a very large disk) is not generally recommended.You have to be a little bit crazy to keep you from going insane.

10 more replies
Relevance 52.07%

I have updated with free Windows 10 from 7 and Google Chrome will not update but gives an error message & after researching, I've tried everything suggested on the web including regedit but not technically able to figure out how to uninstall a program any another way. Haven't found that covers the exact problem.

Answer:How can I uninstall Chrome when it isn't listed in Programs?

Click on Start. Now click on All Apps. Scroll down and find Chrome in the list. Right click, and select Uninstall. That should do it.
If it is not listed here, it is possible you are running Chrome Portable, in which case you only need to delete the file directory where it is installed.

3 more replies
Relevance 52.07%

When I click on the Windows icon in the lower left corner of my screen, a menu opens. At the bottom of that menu is a line that says "all programs". It opens into a menu of programs on my machine.

Inside of "all programs" is listed a folder called Microsoft. Inside of it is Outlook 2010.

However, I recently wanted to send an email using Outlook 2010 by clicking on a link on a website. A window opened that would allow me to select the email client I wanted to use from a list of programs. But I can't find Outlook 2010.

When I click the Windows icon in the lower left corner of my screen & then on "computer" and then on C drive, there is listed in C drive two folders, Programs & Programs (x86). However, the Microsoft folder containing Outlook 2010 is not in either one of them.

When I did a search for Outlook 2010 on my C drive, the result said it can be found at
C:\ProgramData\Microsoft\Start Menu\Programs\Microsoft Office

However, I cick the Windows icon in the lower left corner of my screen & then on "computer" and then on C drive, I cannot find a ProgramData directory. So, where is my Ourlook 2010?

Thanks.
 

Answer:Where Do I Find The Files Listed In All Programs?

The default installation location for Outlook 2010 is C:\Program Files\Microsoft Office\Office14.
 

2 more replies
Relevance 52.07%

hi

i was uninstalling a program and noticed this program had been installed i did not install it or agree to it is it a virus ?

its the one at the top highlited and underlined


thanks for any help you can provide

Answer:program i did not install listed under programs?

Hello Billy,

"Search Protection" looks like one of those extra options not paid attention to that get installed while installing another program. I'd recommend to uninstall this garbage.

Search Protection by Spigot - Should I Remove It?

?The Spigot Search Settings is an application which is part of the Spigot Toolbar. Spigot searchsettings.exe'spurpose is to check periodically your default search engine and restore it to Yahoo in case you agreed to set it to Yahoo in the first place and another application is trying to change it. It's easy to uninstall Spigot Inc Seach Settings at any time. Since the application is part of the toolbar, you must uninstall the Spigot toolbar and that will remove all tracks of searchsettings.exe spigot. Removing a Spigot toolbar from the control panel is easy - Just follow the steps below. Neither the Toolbar nor search settings Spigot Inc are not Spigot Malware, they are simple programs that can be removed easily from your machine. The toolbar communicates with our servers from time to time to check for available software updates such as bug fixes, patches, enhanced functions and new versions. By installing the toolbar, you agree to automatically request and receive updates. When there is a material change to the reference notices or the toolbar software, we will notify you though a pop-up in your web browser. At that point you will be given the chance to accept the new changes and update the toolbar or decline the new changes a... Read more

3 more replies
Relevance 52.07%

I downloaded and ran HighjackThis once and noticed that it is now listed in my Add/Remove Programs List. Why is this? I thought it didn't actually install anything on your computer?

(I originally had it in a folder on my desktop, I think that's where it was when I ran it, then I moved it to the Programs Folder on C:, then I moved it back to my desktop. Not that any of that would matter...)

On a side note, I also ran that Startup program, and that didn't add anything to my Add/Remove Programs List...

Any help is appreciated -- thanks!

Answer:Why Is Hijackthis Listed In My Add/remove Programs?

Hello,

Not sure what your problem is though..
Hijackthis is listed in your add/remove programs because when you start Hijackthis the first time, it looks where Hijackthis is located and puts an entry in the Uninstall entry in your Registry.

Hijackthis does indeed add some registry entries when you run it, so using add/remove deletes the entries from the registry.

The startup program doesn't add anything to the registry as far as I know.

6 more replies
Relevance 52.07%

It is my belief that we are approaching a crisis point in Windows malware infestations. Recently I helped someone who found all the standard document types encrypted with two-factor encryption, along with a demand for payment to decrypt them (CryptoLocker malware). The only help I could offer was how not to have that happen again by setting a Group Policy to deny executables in %appdata%. This is done in software restriction policies of the local security policy.

Now %appdata% typically is c:\users\username\appdata\roaming and can be written to by anything or anybody - it's for data after all - but nothing stops programs silently installing and executing from there as well. Hence the need for a software restriction policy - details http://windowssecrets.com/newsletter/cryptolocker-a-particularly-pernicious-virus/

It is also wise to use UAC on level 1 to 3 http://en.wikipedia.org/wiki/User_Account_Control so every non-system application puts up a warning and you have to click to allow it to happen. That prevents most software installed in any place from running without you knowing. The problem is, UAC is a very blunt tool, and I would like to have certain programs I often use (for example backups) operate as white-listed programs so I don't have the irritation of the screen dimming and having to approve every time I use them.

How do I do that ? UAC and local security policy seem to be two independant things.
 

Answer:Can I overrule UAC with white-listed programs?

I don't think you can, that's the point. Otherwise apps would add themselves to the whitelist.

At the end of the day, the person installing the malware is the users.
 

2 more replies
Relevance 52.07%

Before I blow up my old laptop and make it a $1,500 picture frame slash stereo I thought I'd give it one more try to recover the pictures that disappeared when I was transferring data to my new laptop. THe biggest problem I had the last time I tried was I didn't have an external hard drive so the only programs I could use were ones that allowed me to recover data to the same drive as it was being recovered from- which limited me to only one or two programs.

Any good programs you'd suggest?
THanks
 

Answer:One last try- jpeg recovery programs

11 more replies
Relevance 51.66%

Hi, An observation, not a question. I wanted to set Thunderbird as my default email client again (after having reset defaults whilst looking for a problem).

So I set it as my default email client in 'System', 'Default Apps'.

This proved not to be the same as using Control Panel, Default Programs, and setting it as handling all file types it could.

(In particular, the first still did not mean Pop Peeper would find a client it could launch, whilst the second did).

I'm wondering if this will prove the same for other programs.

Answer:'Settings' Default is not= Control Panel 'Default Programs' - All

System, Default Apps??? I don't even see that option.

2 more replies
Relevance 51.66%

Can anybody help please. Something obviously has happened at some point to stop the drop down boxes in Internet Explorer Properties Programs section from displaying any programs for use with email, newsgroups,etc.I can still connect to the Internet OK and Outlook express still works, but I cant get any email from within Internet explorer.

Answer:Internet Explorer Properties Programs None listed

Try a repair of IE. click here if you need to know how. Good luck, G

6 more replies
Relevance 51.66%

Hey, our school just gave us new Dell laptops operating on Windows 7 Enterprise. Everything worked for the first day, then today when I tried to open Internet Explorer, a message appeared asking me what program i would like to open it with. I didn't pay much attention and clicked Internet Explorer. Now every program appears with the Internet Explorer icon and appears as a .lnk file. I've looked up some solutions on the internet, but none have worked so far.

Any help would be greatly appreciated... if I can't fix it then i'll have to return it to the IT department to fix it

Answer:All programs listed as Internet Explorer (.lnk0

It's your IT departments job to fix it. If it were me I would take it to them. It's like a warranty, someone (your parents or you) is paying for the salaries of the IT department, make them do their job.

I've seen this before, it's a registry key that's jacked up. I've seen a few different types of issue like this, most often everything wants to open like an .exe.

2 more replies
Relevance 51.66%

and I can't send any shortcuts to the desktop
My wife was on the computer while I was at work, and doesn't remember what she did, but all of the icons except for the recycle bin are gone from the desktop. When I go to Start>All Programs, there are NO programs listed,and when I try to send something from a program to the desktop(make a shortcut) that option is not available...the only option avialable is to send it to my DVD drive.

HELP, lol ....how can i restore things? I was going to use a system restore point, but from what I see, the farthest one back has Windows Live Essentials having been uninstalled, and I can't go back before that...which was at 11:08pm Central time last night

Answer:All icons gone, no programs listed under start menut

theres not an option to list more dates? try the rebuild the icon cache... Icon Cache - Rebuild - Windows 7 Forums

good luck

ps, change your password....LOL

19 more replies
Relevance 51.66%

How would I delete my work norton antivirus software when it is not listed in the add or remove programs? Just deleting individual files does not work because norton prevents key files from being deleted. Symantec support just listed the standard way of deleting programs,
THanks
 

Answer:Solved: deleting norton-not listed in add programs

Norton Removal Tool
 

2 more replies
Relevance 51.66%

I am having a problem with the Windows Update Error code 643 and believe I need to uninstall some versions of .Net Framework that are in conflict with each other. I am running Win 7 Pro, SP1. The "ONLY" version of .Net Framework shown in Control Panel>Programs and Features is V4.6.1. HOWEVER, when I run The dot net setup verification tool it validates virtually all versions on my system. My understanding is that v4 and any version of 4.5 can't co-exist, which would mean I need to uninstall them, but I can't do that because they are not listed as installed programs. Does anyone know how I can uninstall these versions so I can try to fix my update issues with updates to 4.6.1?
 

Answer:.NET Framework Versions Not Listed in Programs&Features

Check this website out, it might help you: https://www.raymond.cc/blog/uninstall-microsoft-net-framework-with-aaron-stebner-cleanup-tool/
 

1 more replies
Relevance 51.66%

Just when I thought I had computers figured out, after having built several from guides on this website and troubleshooted many problems with other guides, I have run into a problem that I'm sure has an embarrassingly obvious solution.

I am trying to uninstall winamp, and naturally I attempted Control Panel - Programs and Features - Winamp - uninstall, the normal method of uninstalling programs. But winamp is simply not listed there, and every guide at winamp's site or a google search starts with that method and offers no others. I know winamp is still there because it still opens and runs and associates every file with it.

I am running Windows 7 Ultimate 64 bit.

I just want to uninstall winamp.

thanks, Charlie

Answer:Winamp not listed in Programs and Features, can't uninstall

Hi try revo uninstaller Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems use the free version

3 more replies
Relevance 51.66%

Hi,
I have uninstalled apps that are still listed in control panel's add/remove. if i click on it to remove it there it says it can't.
Two are games which had their own uninstall
one is Kazaa which i used Ad-aware to remove
one is Norton Systemworks 2001 (which i plan to reinstall, but not sure if i can if it's still on the system here)

How do I make sure they are completely uninstalled and how do I get them off this listing?
kimm
 

Answer:uninstalled programs still listed in control panel

Ad-Aware doesn't remove Kazaa. Only the spyware associated with it.

If you're unable to uninstall Kazaa through Add-remove Software , I'd advise you to reinstall Kazaa, reboot, uninstall it again, and afterwards run Ad-Aware to get rid of the associated spyware.

As for things you uninstalled the correct way, but which are nevertheless still shown in the Add-remove Software list, go to Start/Run, and type Regedit.
Navigate to HKEY_LOCAL_MACHINE/Software/microsoft/windows/CurrentVersion/uninstall, find the Adsgone 'folder', or Registry (sub)key, which in fact it is, highlight it, and hit delete.

Third party programs like TweakUI and RegCleaner also allow you to do that, if you don't feel like editing the registry manually.

Good luck,
 

1 more replies
Relevance 51.66%

Hi,

I recently installed and uninstalled a program. However, the entry for the program still remains in the Installed Programs list in the Control Panel. I have examined the Registry keys under uninstall and I cannot find this program listed there to be manually deleted. How do I remove this entry? Any advice is appreciated.

Answer:Uninstalled program still listed in Installed Programs

have you done a reboot since you uninstalled the program?
Only time ive had this happen, there has been remainders of the program in program files. Deleting them solved the issue for me.

out of interest what is the program? ill do some searching to see if this is a common issue.

9 more replies
Relevance 51.66%

A friend is having problems with IE 5 and I directed her to Add/Remove Programs so she could repair it. However, IE is not listed in the list of programs. I got her to do a search to try and locate it and it is in C:\Windows.

Is this unusual? Mine is located in Program Files and of course is listed in the Add/Remove Programs list.

I am going to uninstall it for her and install IE5.5 from a CD but I was wondering why her original version is not listed in Add/Remove programs.

Lyn
 

Answer:internet Explorer not listed in Add/Remove Programs

8 more replies
Relevance 51.66%

Hello - my laptop has OS XP Professional version 2002. Originally when things went haywire... I couldn't see any of my icons on my desktop. I was able to run "firefox" and get here MG site. I was able to run the Malware Removal and was only able to get the attached logs. I couldn't uninstall AVG 2011 which didn't allow me to run some of the anti-malware. I have tried downloading it and hitting the removal button several times with no success.

When I tried get one of the logs to show on my desktop, that's when the missing icons on my desktop seemed to magically appear.... only thing is they appeared as "ghosts". I can see them, but they seem translucent. I did try to open a file and everything in it was "ghosts". I could see through them. And yes the log was able to be sent to the desktop.

When I hit the start button and go to the Programs, the only thing listed right now are Malware Anti-Malware, Super AntiSpyware and AVAST. Previous to running the Malware Removal there was nothing listed in Programs.

Attached are the two logs that were able to run. Any help would be greatly appreciated.
 

Answer:Icons are ghosts and programs aren't listed

Welcome to Major Geeks!





lancelot said:





I couldn't uninstall AVG 2011 which didn't allow me to run some of the anti-malware. I have tried downloading it and hitting the removal button several times with no success.Click to expand...

This would stop you from running ComboFix but it does not normally stop you from running MGtools. Did you try to run MGtools as requested?






lancelot said:





When I hit the start button and go to the Programs, the only thing listed right now are Malware Anti-Malware, Super AntiSpyware and AVAST.Click to expand...

Please download and save the below to your Desktop or anywhere else you can find it ( if the Desktop is not showing )

http://download.bleepingcomputer.com/grinler/unhide.exe

Now run it. Now see if you can find your Programs and how are the icons on the Desktop looking?
 

3 more replies
Relevance 51.66%

I have the same problem, but Office 2010 programs are no longer listed in available file types. I can open directly from the 2010 programs, but not from Windows Explorer, shortcuts, etc.

Answer:Ofc 2010 programs not listed in available file types

Try going into Add/Remove Programs, click on the Office 2010 Suite, then click on Change. After the window loads, click Repair, then click Continue. This should restore the default file associations.

11 more replies
Relevance 51.66%

This is wierd because this problem is on and off.
my shortcuts and icons etc. only say 6
instead they should say 6.bmp

I may sound strange but checking out my attachments should help...
 

Answer:how do i make programs/icons say what they are eg.) 8.jpeg

8 more replies
Relevance 51.25%

well as the title says, im cleaning up a friends computer and he's got TONS of games and programs he doesnt use anymore, but, the thing is, they're not listed in the start-programs or the add/remove program in control panel.
But when i check the c:\program files drive...whoaaa...tons of folders...what's the best way to remove these programs? just delete the folders and hunt them down in regedit? thanks in advance guys....
 

Answer:removing programs not listed in add/remove -control panel

well when i delete games in add/remove program it almost always leaves folders half-empty so it would be better if you removed them manually including the desktop chortcuts.

the add/remove program is for people who don't understand windows.
 

7 more replies
Relevance 51.25%

I have the following user accounts created in my PC.A ( admin account )B ( limited account )I have created the B ( limited ) account for security purpose.Issue : I can access all the programs ( Start > All Programs ) in the A account but, some of the installed programs are not listed and not running in  B.Following applications are not listed.1.Ccleaner2.Vista inspirat brico pack ( vista visualisation for xp ). It is not working in B account....etcCould you suggest me a solution for this?

Answer:Some installed programs not listed and running in another user account?

The B user does not have a high enough level to run programs that alter the system. Promote B to a higher level. Or crate a new account for that user.

2 more replies
Relevance 51.25%

Super optimizer is not in my list of programs. What do in a case like this?
 

Answer:I would like to know how to uninstall super optimizer. It is not listed in my list of programs.

Hello,

They call me TwinHeadedEagle around here, and I'll be working with you.

Before we start please read and note the following:

At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.

All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
I visit forum several times at day, making sure to respond to everyon... Read more

1 more replies
Relevance 51.25%

I have the following user accounts created in my PC.
A ( admin account )
B ( limited account )

I have created the B ( limited ) account for security purpose.

Issue : I can access all the programs ( Start > All Programs ) in the A account but, some of the installed programs are not listed and not running in B.

Following applications are not listed.

1.Ccleaner

2.Vista inspirat brico pack ( vista visualisation for xp ). It is not working in B account.

...etc

Could you suggest me a solution for this?
 

Answer:Some installed programs not listed and running in another user account?

Just visit the limited account and download / install the desired program . Unless I am not reading things right this will work . If you have any trouble just change the limited account to an administrative account and download the desired program then change back to a limited account .
 

2 more replies
Relevance 51.25%

Last winter I had a Malware attack. Through the great help I received here all problems were successfully dealt with. I have McAfee Security Center and keep the subscription active. Although this was not adequate to fully protect me ( Quite a surprise at the time!) it did blunt the attack sufficiently so we could eventually correct it.
I have noticed though when reviewing the permissions section of security center there are quite a few enters that have full or out bound access although it says that program no longer exists.
Some I recognize such as spybot152.tmp others I have no idea what they are but the date is around the time of the Malware attack such as XRUN.EXE or XPRE.EXE
I am wondering that even though the program or Malware itself has been removed is there a chance that permissions granted at that time could make a future attack easier??
Is there any potential disadvantage to checking off ?Remove Program Permission? for programs that are listed as no longer existing??
Also I have the McAfee Firewall set to ? Tight?. Would anyone have any comments as to the adequacy of this setting?
Thanks in advance
Nawtheasta

Answer:Access Permissions in McAfee still exist for programs listed as gone?

Hi
Any advice about the Permission question shown in original post would be appreciated.
Thanks
Nawtheasta

4 more replies
Relevance 50.43%

I have Win Vista Home Basic SP2.
I want to uninstall BBC iPlayer but cannot find it in the list of programs.
Where is this programme located and how can I remove it,please?

Answer:Uninstall program not listed in Control Panel/Programs &amp; Features

These instructions from the iPlayer site should take you through the process.

8 more replies
Relevance 50.43%

There are an incredible number of programs listed om Major Geeks. Can users be sure if a few of them are downloaded, they are safe and won't cause any problems if used correctly??
 

Answer:Are All The Programs Listed In Major Geeks Tested So They Can Be Safely Downloaded?

That's not really anything to do with individual programs themselves. They are all tagged with what operating systems they are tested for use on.
It's the system they are installed on and their compatibility with any other programs also installed on the same system that you probably mean. Every system is unique to a user and what they do with it. If you as a unique user experience any system problem with any one or more programs, you need to start an appropriate thread in the Software forum.
 

3 more replies
Relevance 50.43%

We were browsing the net...
computer shut down and then computer lost all icons on desktop, running very slow.
When I click start/programs i can't see any programs listed?!
Looks like something bad happened?!?

Answer:Icons gone from destop, no programs listed in "start", running slow

Hello and welcome. Please try this.Please click Start > Run, type inetcpl.cpl in the runbox and press enter.Click the Connections tab and click the LAN settings option.Verify if "Use a proxy..." is checked, if so, UNcheck it and click OK/OK to exit.This infection family will also hide all the files on your computer from being seen. To make your files visible again, please download the following program to your desktop:Unhide.exe Once the program has been downloaded, double-click on the Unhide.exe icon on your desktop and allow the program to run. This program will remove the +H, or hidden, attribute from all the files on your hard drives. If there are any files that were purposely hidden by you, you will need to hide them again after this tool is run.Reboot into Safe Mode with Networking How to enter safe mode(XP/Vista)Using the F8 MethodRestart your computer. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu. Select the option for Safe Mode with Networking using the arrow keys. Then press enter on your keyboard to boot into Safe Mode. >>>> Download this file and doubleclick on it to run it. Allow the information to be merged with the registry.RKill....Download and Run RKillPlease download RKill by Grinler from one of the 4 links... Read more

1 more replies
Relevance 50.43%

I was not sure just where my question fit; since I have Windows 7, here it is.

Just a few hours ago, I created an edited jpeg in Photoshop Elements 7 and saved it to one of my external hard-drives, something I do hundreds of times each day.

A half hour or so later, my Synchredible file synchronization program ran it's scheduled task and flagged this jpeg with a warning that it was not able to copy it to the back-up drive.

I have had these situations before, and, while annoying and never easy, I have always been able to somehow manage to get rid of the problem file.

Not so this time.....

After several Explorer-crashing attempts to delete or move or refolder the problem file, I created a new folder and, although response was terribly slow and it took nearly forever, I finally managed to move all the other files to the new folder, leaving the problem file alone in the original folder.
At this point, usually I can then delete the folder, file and all; not so this time.
I have tried every trick I can think of and that jpeg remains; I cannot copy it, move it, open it, write over it, nor delete it.

Any program I have tried to open, move, or delete it just quits responding and eventually crashes.

I will repeat, this is a jpeg that I created myself just a couple hours before, not some malware mess that came from some unsavory source.

How do I get rid of this jpeg ?

Thanks for reading.
 

More replies
Relevance 50.43%

I don't really know what happened or how to fix things, so I would really appreciate your help!

I downloaded a .exe file that I 75% trust with uTorrent while I was away from the computer. Upon returning, I saw a message that Panda antivirus security had blocked some form of traffic, but I can't recall the exact message.

When I tried to open the finished .exe torrent, the computer slowed down and uTorrent wasn't responding so I pressed ctrl+alt+delete to open the menu for the task manager.

When the blue task manager screen did not come up, I can't remember if I tried to open the .exe file again or if I opened Firefox via the quicklaunch shortcut on the bottom left taskbar.

At this point, I believe Mozilla firefox would not open, and an error messege came up saying "firefox is an invalid torrent file." All three program icons in the quicklaunch section had the uTorrent icon. I tried one of them, Yahoo IM, and received the same error.

Since I thought yahoo and firefox were trying to open via uTorrent, I changed firefox's opener program back to firefox by right clicking and selecting "open with."

After this, firefox would open properly, but now every program that had uTorrent's icon then had firefox's icon. Clicking yahoo IM's quicklaunch button caused yahoo IM to try to use firefox as the opener.

I have NO IDEA what is going on and this has never happened before. I have uninstalled the IM and tried to reinstall, but the .exe file provided... Read more

Answer:Vista default programs/opening programs/major fail problem

Hi and welcome to TSF we cannot help with torrent issues as it is against forum rules I suggest you remove utorrent as it is a easy way to become infected

3 more replies
Relevance 50.02%

I noticed a program in the Contro panel/Programs listed with a Java logo called AV Books, (no publisher listed) at 51 GB. Anybody know what it is?

Answer:Java AV Books program, listed in Control panel/programs at 51GB?

Have you downloaded a program (or an entire book) for digital books\ebooks?  While in the Control Panel\Add-Remove Programs list, did you click on the entry for more information?  Need more details.   You could do a Google search for "Java AV Books" and probably find more information than you ever wanted. 

3 more replies
Relevance 50.02%

Apparently I got some sort of virus from a pendrive that was first was running rundll64.exe. I got rid of it, but other symptoms still persist. When I start up my computer I always get a "explorer.exe has a generated a problem and needs to close" and illegal memory reads (not sure if thats how theyre called) concerning explorer.exe. In my system32 folder theres always some strange program that keeps appearing under different names. I delete it with killbox but it just keeps popping back up. Right now its called emuyn.exe. There also weird files being created in my Documents and settings folder under strange random letters. In my temp folder I also have a .exe called photo1226.jpeg-www.myspace.com.

Also, its blocked regedit, system restore and task manager, but I fixed those. It's also editing the userinit key in the registry, so that emuyn.exe starts up with userinit.exe.

What should I do?

I also seem to have ndisio.sys in my drivers folder.

Well after many hours of looking up information I have finally deleted these files and they arent appearing anymore, but just incase I'll check again tommorow. One thing that still persists is the explorer.exe error, which only happens once during startup and doesnt hinder my computer in the slightest, but I cant figure out if its from the virus editing something before I deleted it or if the virus still persists.

Answer:Rundll64.exe, Strange Programs Being Created And Photo1226.jpeg-www.myspace.com

Please scan with this anyway and post the log. We'll both feel better.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Ba... Read more

1 more replies
Relevance 49.61%

I recently installed free version of GIMP Photo Program to try it and I actually haven't done more than open it once. I mention this because it's the only recent change I've made as far as photo programs go.

I went to open one of my screenshots and it opened with GIMP, which I don't want. I went to Start/Default Programs so I could set the default to one of my other options. Those options would be IrfanView, Photoshop, Windows Photo Gallry, Fastone Image Viewer, Paint or Paint.NET or this GIMP.

The only options which show up under Start/Default Programs/Det Default Programs are IrfanView and Windows Photo Gallery. Why don't the other photo programs to appear there?

Answer:None of my photo programs are showing up when I open Default Programs

If you sceroll all the way down there should be an Other ... entry. Use that to browse for the executable you want.

4 more replies
Relevance 49.2%

Hi,

I have a number of programs that I want to get off my computer. None of them have an uninstall option. Some say to go to add/remove programs to remove them. However, none of them are listed in add/remove programs. How do I get them off my computer? Thanks.
 

Answer:How Do I Remove Programs If They Aren't Listed In Add/Remove Programs?

6 more replies
Relevance 48.79%

I recently downloaded Photoscape, a free media/picture editing & tools program along with Real Player the two seem to be linked and couldn't figure out how to get just one but anyway I have no issue with Real Player so I downloaded both.
 
I am trying to set Photoscape as my default photo program but it doesn't show up on the list of programs that Windows brings up.   If I try to open a photo file by using OPEN WITH Photoscape doesn't show up there either but it is on my computer so I'm confused what the problem is.
 
Photoscape appears to have a lot to offer.   Any recommendations or experiences similar?  Thanks.

Answer:Setting Default Programs - Not all Programs Discovered?

You say you downloaded Photoscape, but did you "install" it?
If you did not install it, Photoscape will not show up in your programs list.
If it is installed, it will be listed down near the bottom of your programs list.
Once you find it in the list, click on it to open it, you will then see two entrys, one to open Photoscape, and one to un-install it.
If you want a Desktop icon, simply right click on the Photoscape entry, choose "send to", and select "desktop".
But once again, simply downloading it is not enough, you must go to your downloads files and double click on Photoscape, and "install" it first.

6 more replies
Relevance 48.38%

Hello everyone.

I want to color calibrate my new Dell XPS 15z laptop, but before I do I'd like to back up the existing color profile in case I prefer it to the calibrated one ...

The only problem is, when I open Color Management, NO default color profile is listed, so I don't know what to go back to. I know there HAS to be a default color profile somewhere ... How do I find it?

Thanks for any and all help you can offer!

Answer:No Default Color Profile Listed in Color Management?

You don't need to backup the default color profile...so don't worry about that.
Anyways its probably using sRGB IEC61966-2.1 you can see it in the advance tab.

3 more replies
Relevance 47.15%

How could one enter in "Default programs" the path to a program to be set as a default program?

I want a portable Firefox to be the default browser.

The path to this Firefox is wrong (Firefox is opened without using its profile) so I want to add the correct path (this one: C:\Lw C\FirefoxPortableESR\FirefoxPortable.exe):

More replies
Relevance 47.15%

How could one enter in "Default programs" the path to a program to be set as a default program?

I want a portable Firefox to be the default browser.

The path to this Firefox is wrong (Firefox is opened without using its profile) so I want to add the correct path (this one: C:\Lw C\FirefoxPortableESR\FirefoxPortable.exe):

Answer:Enter in "Default programs" the path to new default program?

You cannot set a Portable App as a default program because of the design of the program. You need to install Firefox on the machine if you wish to use it. Portable means exactly that. Mainly used when on public machines that allow USB access, which very few do anymore for security reasons.

more replies
Relevance 47.15%

How could one enter in "Default programs" the path to a program to be set as a default program?

I want a portable Firefox to be the default browser.

The path to this Firefox is wrong (Firefox is opened without using its profile) so I want to add the correct path (this one: C:\Lw C\FirefoxPortableESR\FirefoxPortable.exe):

 

More replies
Relevance 47.15%

I want to use different softwares as default softwares, but some are in portable mode and do not show up in

Control Panel\All Control Panel Items\Default Programs\Set Default Programs

I can see ''potplayer'' in the list, but I want to add ''nomacs'' to view my pictures, instead of ''windows photo viewer''. Nomacs do not show in the list of ''Set Default Programs'''. In nomacs, there is an options to make it the default program to show the picture, but I get an error:






Activation of app windows.immersivecontrolpanel_cw5n1h2txyewy!microsoft.windows.immersivecontrolpanel failed with error: This app can't be activated by the Built-in Administrator. See the Microsoft-Windows-TWinUI/Operational log for additional information.

More replies
Relevance 47.15%

Hi

I downloaded Adobe Shockwave Player which is needed to view a file (.swf), and it appears in the control panel as an installed program. However, it does not appear as a default program when I am trying to use the "associate a file type or protocal with a specific program" even when I press the browse list. The program also does not appear when I "right click" the file itself and use the open command. The program also does not appear in the list of programs on the "All Progams: list when clicking the windows icon. So, can someone tell me how to get programs onto the default list....(Please, I have seen a number of threads that talk about how to "set" the default program which I am well aware of...I need to know how to get a program to be recognized and incoroporated as part of the list).
I have windows 7 64 bit .

Thanks for any help.
Linda

Answer:Add Programs to Default Programs List

Hello there, Linda.

I believe that you need to install "Adobe Shockwave Player" for viewing .swf content, not the Flash Player

Adobe - Adobe Shockwave Player

6 more replies
Relevance 47.15%

I want to use different softwares as default softwares, but some are in portable mode and do not show up in

Control Panel\All Control Panel Items\Default Programs\Set Default Programs

I can see ''potplayer'' in the list, but I want to add ''nomacs'' to view my pictures, instead of ''windows photo viewer''. Nomacs do not show in the list of ''Set Default Programs'''. In nomacs, there is an options to make it the default program to show the picture, but I get an error:






Activation of app windows.immersivecontrolpanel_cw5n1h2txyewy!microsoft.windows.immersivecontrolpanel failed with error: This app can't be activated by the Built-in Administrator. See the Microsoft-Windows-TWinUI/Operational log for additional information.

Answer:How do I add third party programs in default programs ?

Instead of going to "set your default programs" , go to "associate a file type or protocol with a program. Click on the file extension and just click change program.
Hope this helps.

more replies