Computer Support Forum

monitor the traffice sent and received by one specific application

Question: monitor the traffice sent and received by one specific application

hi
there is an application that communicates with remote server. it connects to the server and the user selects the records/files (txt or tif files) it then starts downloading them.

the issue with it is that this application works from home or non company internet. but it doesnt works on company network.

i want to investigate whats stoping it.

it can successfully login to the server and shows the files needed to be downloaded. and it sometimes does starts downloading . but it fails midway through files.

we are behind a tmg.

and tmg client is working but no success with it.

so i want some application to be installed on that particular pc on which the application is not working .(again it works if non company internet is used). that should just monitor the packets sent and received by that application..

wireshark is too complicated.. and displays all packets flying by.

how can i corelate the packets shown in wire shark to that specific program ?

any other alternative ?

or how to tackle the issue with this particular app? that is what i want to solve.

update:
that application uses http to download data .

Relevance 100%
Preferred Solution: monitor the traffice sent and received by one specific application

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: monitor the traffice sent and received by one specific application

Start with Process Monitor. It will not show you the packets, but it might provide a clue.

1 more replies
Relevance 61.91%

Hello Everyone,
What I want to accomplish is to run the program "InstallShield" only with a specified user.
So Basically DENY TO EVERYONE (admins, users, ... ) and ALLOW to the specified user.
I've tryied to create a Deny rule to everyone and an allow to specified user rule but isn't working.
Pheraps it checks the deny rule first and if it's true it stop checking.
Is there a way to allow only my SA user to be able to run Installshield and to deny access to the app to everyone else?

More replies
Relevance 57.81%

Hi,

I am looking for a outlook macro code which will check whether mail with specific subject has been received within specific time period. If mail has not been received, it will throw some message.

I would really appreciate if someone can share this code.

Thanks
 

Answer:Outlook macro to check mail has been received with specific subject

can anyone please help me on this?

Thanks
 

3 more replies
Relevance 56.17%

I am receiving the following error in the Event Viewer from the source DistributedCOM (Windows 8.1 64 bit) :
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID class identitification
{C2F03A33-21F5-47FA-B4BB-156362A2F239}
 and APPID identification
{316CDED5-E4AE-4B15-9113-7055D84DCC97} 
 to the user Lenovo\Ewa with security identification SID
(S-1-5-21-1287633286-651115146-4152900111-1001) from the address LocalHost (using

LRPC) acting in the application container with identity SID
ZinioLLC.Zinio_2.1.0.317_x64__0q6dqzpp40p2e
(S-1-15-2-720185855-2675332291-2976434075-758544043-626028312-300598871-2309835828.
This security permission can be modified using the Component Services administrative tool.
It regards Zinio Reader application.
Please advice how can I fix the problem.
Thanks and best regards, Ewa

Answer:The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID

Hi Ewa,
It's just a example instead of your real ID.
The ID of yours {316CDED5-E4AE-4B15-9113-7055D84DCC97} must be in that list. Have you attempt to find it?
I have search it on my lab computer(Windows 8.1)as below:
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

8 more replies
Relevance 56.17%

Hi ,How are you. I get this error over and over again in the Event Viewer:

 DCOM
1203 - Description              : The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID

                                  {D63B10C5-BB46-4990-A94F-E40B9D520160}
                                   and APPID

                                  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
                                   to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19)
from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

Could you tell me exactly... Read more

More replies
Relevance 53.3%

I have connected my two xp pro systems with a x over cable. Ive setup home networking and i can share files between systems, but on the system that is not directly connected to the net i cant get any system traffic. My dialup connection is shared on the 'gateway' system.
 

Answer:Cant get web traffice thru Gateway

what you could do/try is download a free proxy server, and use that,

http://handcraftedsoftware.cyberemail.org

your client pc (not the gateway) will connect to the net via your gateway through the proxy, basicly In internet explorer your need to change your Connect/LAN setting to proxy (gateway PC IP and port setup in Proxy software)

please note i am not recommending that software above as i havn't tried it myself but i can't remember the site were i got my last fre proxy server,
 

1 more replies
Relevance 52.89%

Hello,
 

 
I wonder if the forum you give courses on the method of disinfection. your approach to the problem is logical to look at the operation of the computer before to see if the computer is infected.
So if you are organizing courses I'd like to participate.
sincerely,
 

Answer:specific application

The malware removal forum here says that only "authorized personnel" are allowed to respond to help requests.  Perhaps you could contact one of the moderators of that forum and ask how to go about becoming authorized.  I know that some other computer forums have actual classes to teach malware removal; this one might too.

4 more replies
Relevance 52.48%

I'm trying to setup a Application specific proxy. I have tried everything that I could find via Google search and nothing seems to work. All the proxy servers I have found seem to be centered around web browsers such as IE, and firefox.

Any help would be appreciated,
 

Answer:Application Specific Proxy

something like this? http://www.anonymizer.com/universal/
 

2 more replies
Relevance 52.48%

I have strange problem.

On my computer some application works with one internet connection ( ISP ) and some through other internet connection ( ISP )

This problem has started since last few days.*

I flush dns and did most common solutions found on net like changing TCP/IP but nothing worked.

Is there any way to get rid off from this error ?

Or is there any way we can combine BOTH wireless internet connection in one PC and make some settings that which application works with which internet connection ( ISP )

I have 2 wireless internet dongles and I have 2 dongles which I can attach to my PC to connect to this internet dongles.

I read about Bridge connection and i did it but this didn't solved the error. May be because I am not able to make settings which application uses which internet connection

PLEASE NOTE, I am not having problem in browsing website. I am having PROBLEM in installed application, like stock market trading software.

I tried disabling antivirus also, but nothing worked.

More replies
Relevance 52.48%

Are there any workarounds to have grouping only for specific applications on the taskbar...?

Answer:Application specific grouping

bump

3 more replies
Relevance 52.48%

I have been trying to diagnose a particular problem where applications freeze for a split 2-3 seconds at random intervals. I really hope that someone might be able to provide some suggestions as I am starting to pull my hair out with this.

For example, I could be running the following programs:
Google Chrome
VLC Movie Player
Skype
Playng TERA Online.

While playing Tera (current active program) and watching a movie on VLC. VLC will freeze for a few seconds (at random) and then continue, while the game I'm playing does not freeze at all.

Another scenario:
Mozilla Firefox
Quicktime Player
MS Office - Excel
While reading a webpage in Firefox (current active program) and listening to music with quicktime, as I scroll through the webpage the browser will freeze and become unresponsive for 2-3 seconds. Meanwhile the music playing in Quicktime has not missed a single beat.

List of attempted fixes:Checked Event Viewer(Applications) for errors, none found.
Adjusted Virtual Memory/Paging file from 8162MB to an Initial size of 16324/Max 32648
Ran stress test (passmark) To check if I could isolate the freezing during certain tests. (Did not lock up at all after running 5 tests)
Used Windows Error checking (CHKDSK) on physical drive to check for errors (none found in Event Viewer)
Updated GPU to latest driver version (v301.42)
Removed secondary GPU(GeForce 8600 GT), Ran with only Primary GPU(GeForce GTX 560Ti)
Used Windows Update to verify latest updates were instal... Read more

Answer:Application specific lock ups.

I think tonight I will purchase a new hard drive, also contemplating on whether or not to try Windows 8. I will post the results.

2 more replies
Relevance 52.48%

Hi, everyone. Just found this website, and it looks like it will hopefully be helpful. Here's my problem:

I am unable to access a specific website: www.edline.net. I receive an error message stating that this page cannot be displaye (as if the site doesn't exist). However, on other computers, the page appears fine.

I have Norton Internet Security installed w/parental controls (haven't gotten a chance to try turning them off; don't know if this could be the problem). I'm thinking that maybe the oversensative parental controls are blocking the site, but can anyone think of what else could be causing this problem?

I only get the message when I go to www.edline.com. Other websites work fine.

Thanks for your help, everyone!

-Micky

PS. Running Windows XP Home.
 

Answer:Error received: "Page cannot be displayed" at a specific website

Closing duplicate. Reply here:

http://forums.techguy.org/t199313/s.html
 

1 more replies
Relevance 52.07%

I'm currently working on a school project that involves moving a 25GB+/hour of traffic across a network. I know a little bit about databases but more from a single computer than a network setting. When designing a network with concerns about database traffic, what is important when it comes to transferring that data IE RAM, processor speed etc. I'm familiar with networking IE fiber, CAT5 but not so much about databases, especially across networks.

If needed, the project calls for 150,000+ orders a month. I have some rough calcs done already so I know what type of storage requirements I might need. Again, it's just moving it across the network that I need a bit of input on.
 

More replies
Relevance 52.07%

I have a command line utility for some purpose. I start this utility from a COM DLL using ShellExecuteEx function. When calling ShellExecuteEx, i specify the lpVerb parameter as "runas" so that the utility is started elevated. I call
the COM Interface function from an exe client on its startup. So when i start the client exe, the utility is also started. My problem is that since the utility is started elevated, it always asks for the UAC confirmation prompt. I can't stand this because
there will be no manual intervention during this process. So I need the utility to be started without showing the UAC prompt, but still elevated when i start the client exe. Is there any way to achieve this? I would prefer some changes done within the utility
itself like changing the manifest file rather than some system settings changes. Any help will be appreciated..

More replies
Relevance 52.07%

Hello,
I need some help. I have a PC running Windows 7 Home Basic. The PC has a LAN interface and a WiFi interface. Both the LAN and WiFi have individual IP addresses and connects to two different routers.
What I'm trying to do is have IE10 connect only through the LAN card that connects to my computer's router. & have all other applications use the WiFi adapter to connect to the internet.
So far, I have tried to use ForceBindIP to bind the applications and use Route command to route the traffic.. but will no success.
Can someone please provide me detailed steps to go about this? I can be reached at [email protected]
Any help you can provide will be appreciated.

Answer:NIC specific application setting in Windows 7

This thread on tomshardware may be of help

1 more replies
Relevance 52.07%

Hello,

I have an application, that has fairly small fonts and no option to increase the font size.
So I thought, that maybe there is a way to zoom the window of that application on the
screen!!
I quickly found several apps, promising to aid in doing that, but soon my disappointment
was quite big, as they were zooming the entire screen (and I couldn't see the entire window
of a maximized application, which I have open in parallel) or just an area around the mouse
or I had to specify which coordinates on the screen to zoom (how annoying can that be ?!?).
And I wasn't able to find an app, which would just say - click on the window you want me to
zoom in to and that's all...
Please kindly help me !! Thanks!

Answer:How to zoom a specific application's window ???

Welcome darkman088 to the forum.
Try this.

Start Orb and type in magnifier. You will get Windows built in magnifier.

I use it a lot. I use a selected button on my mouse to activate it when needed.
You can adjust the magnification from 100% to over 1000% but not much else.

It magnifies the whole page.

6 more replies
Relevance 52.07%

Hi,

I have been OK with Windows XP on my old P4 PCs 2GB RAM (standalone No Internet) that I use for basic word processing and Photo Editing (mainly with FastStone Image Viewer FastStone Image Viewer - Powerful and Intuitive Photo Viewer, Editor and Batch Converter), but would like to upgrade to Windows 10 for more software options.
Am starting to do my homework and just read "Windows 10: Which version of Windows is best for my old Dell Latitude D620 laptop" https://www.tenforums.com/general-support/78010-version-windows-best-my-old-dell-latitude-d620-laptop-2.html
I was encouraged when read Fafhrd 's PC system specs and noticed "CPU: Intel socket 775 Pentium 4 540 HT 3200 Prescott " which is similar to mine.
For Windows XP I have found "Mini WinXP" that comes with Hiren's 15.2 Hiren's BootCD Fan & Discussion Platform on a bootable USB drive to be the fastest for many things.
Does anyone know if there is anything similar for Windows 10?
If not any suggestions for reducing Windows 10?
Thanks
Ken

Answer:Application Specific Windows 10 Suggestions?

Normally I cut and paste and then remove any irregularities by using "remove format".

Tried this in "preview post" but did not work.

Would appreciate suggestions!!!

Thanks

Ken

5 more replies
Relevance 52.07%

Hello,

I'm new to the board here so I'm not positive what the typical format is for posting questions but I'm getting the following message which causes the computer to reboot. The error pops up approximately 2 hours after the computer has been logged in.

Services.exe Application Error
The instruction at "0x606d334c" referenced memory at "0x02d40328". The memory could not be "read".

Clicking either OK or Cancel causes the computer to reboot. You can move the window to the side and ignore it but that doesn't fix the issue.

Thanks,

Answer:Services.exe Application Error (specific)

Hi and welcome to the forum

After doing a bunch of searching, I don't have any answer. I only found about 6 entries for 0x606d334c, no one had an answer

If you drag it across the screen, so you can continue to work, do you notice other problems like slowing down?

BG

9 more replies
Relevance 52.07%

Hello,

I need some help. I have a PC running Windows 7 Home Basic. The PC has a LAN interface and a WiFi interface. Both the LAN and WiFi have individual IP addresses and connects to two different routers.

What I'm trying to do is have IE10 connect only through the LAN card that connects to my computer's router. & have all other applications use the WiFi adapter to connect to the internet.

So far, I have tried to use ForceBindIP to bind the applications and use Route command to route the traffic.. but will no success.

Can someone please provide me detailed steps to go about this?

Any help you can provide will be appreciated.

Answer:NIC specific application setting in Windows 7

  
Quote: Originally Posted by arijitray81


Hello,

I need some help. I have a PC running Windows 7 Home Basic. The PC has a LAN interface and a WiFi interface. Both the LAN and WiFi have individual IP addresses and connects to two different routers.

What I'm trying to do is have IE10 connect only through the LAN card that connects to my computer's router. & have all other applications use the WiFi adapter to connect to the internet.

So far, I have tried to use ForceBindIP to bind the applications and use Route command to route the traffic.. but will no success.

Can someone please provide me detailed steps to go about this?

Any help you can provide will be appreciated.


Hi and welcome to Seven Forums.

I do not think this is possible to do I would think they would interfere with each other.

EDIT: The only way to do this would be to have them connecting to different networks (eg. 192.168.1.1 for wired - then 192.168.2.1 for wireless)

9 more replies
Relevance 52.07%

Hello,
I have encountered an issue on one Windows 7 Enterprise x64 machine. An Application is slower by the factor of about 10 when run from a specific path. If i remove a space from the path it is normally fast. If I add it back the application is slow again.
What could be the issue here?
Thank you in advance, best regards
Edit:
I realized that I prematurely asked this question and there probably is a really good reason for this. I should first try to investigate with the Visual Studio Performance tools.

More replies
Relevance 52.07%

Hello,

I need some help. I have a PC running Windows 7 Home Basic. The PC has a LAN interface and a WiFi interface. Both the LAN and WiFi have individual IP addresses and connects to two different routers.

What I'm trying to do is have IE10 connect only through the LAN card that connects to my computer's router. & have all other applications use the WiFi adapter to connect to the internet.

So far, I have tried to use ForceBindIP to bind the applications and use Route command to route the traffic.. but will no success.

Can someone please provide me detailed steps to go about this? I can be reached at [email protected]

Any help you can provide will be appreciated.
 

Answer:NIC specific application setting in Windows 7

Not sure, nor do I know why would would want to do this. what's your reasoning for this?
 

1 more replies
Relevance 52.07%

In Win XP, is there a way to force an application to use a specific connection while everything else uses a different connection? Here’s what I’d like to be able to do:

I connect from home to work via Verizon Broadband and Nortel VPN to access a secure LAN with shared drives and services, including intranet applications. This is already in place and working fine. The work LAN firewall is configured to block all Internet browsing attempts for all devices connected via VPN – not necessarily for security reasons, but rather to conserve bandwidth. The VPN switch and firewall share the same router and broadband connection, so incoming Internet requests from home through the VPN would go back out of the firewall – effectively doubling the required bandwidth for each request.

This configuration renders embedded Internet links in email and various documents almost useless. There are two choices at present to affect a workaround.

One is to drop the VPN connection when Internet browsing is required; browse to the Internet; and then reestablish the VPN connection after the Internet browsing is complete. This is cumbersome and inefficient at best, but it does work.

The second is to configure the VPN client to use split tunneling. This works too, but puts additional load on the Verizon Broadband connection between home and office (already the slowest link in the path). Also, this option meets with resistance from our network folks for reasons I won’t go into here.

What I’d li... Read more

Answer:Can I force an application to use a specific network in XP?

The whole point of the VPN is to insure a secure channel into the remote computer. You drill a hole a truck could drive through if you actually allow Internet connections while the VPN is connected!

The ability to have multiple connections is normally configured by the VPN host, and I suspect your company would take a really dim view of you compromising their network for your convenience.
 

3 more replies
Relevance 52.07%

Hello,

I need a software solution to be able limit the bandwidth for specific (defined) application. I run XP behind a firewall (no access to firewall) and need to limit both uplink and downlink. I have tried a product called NetLimiter v0.91 Beta 3 but it is too buggy.

BR

SBE70
 

Answer:Limit bandwidth for specific application

http://www.knowledgestorm.com/search/keyword/Bandwidth Software/GAW03/Bandwidth Software
 

2 more replies
Relevance 52.07%

Hello.
How can I give admin right to a specific application? For example, On some client PCs users not have permission for install and update application and they need admin account for it. How can I let users to install or update specific applications without
admin account?

Thank you.

More replies
Relevance 51.25%

We use a third party application that's getting a bit long in the tooth for our POS. Currently it only has the option to print receipts to the LPT1: port, so we have set up a redirection to the locally installed USB receipt printer by putting the following
script in the startup folder for all users who need to be able to print to these receipt printer (only half a dozen users).

net use lpt1: /delete
net use lpt1: \\%computername%\Reciept /persistent:YES
This simple little script works perfectly well for all but one user, for some reason this user is asked to authenticate when the script runs, and then gets an "Access Denied" error. All other users who log on to this machine work fine, and the
script works fine for this problem user when she accesses a different PC.
If I run the redirection in an elevated command prompt on this machine while the problem user is logged in, it is successful, and doesn't  but the redirection is not listed when running "net use" in a command prompt using the user's context.
Any ideas?!

More replies
Relevance 51.25%

There seems to be a breach in my system.  I am running Windows 7 with MS essentials anti-virus.  I also have Malwarebytes, which is detecting and stopping outgoing ip traffic that I am not generating.  Every 3-5 minutes I get a popup saying ip is being blocked.  I can captured some of the ip addresses:
61.139.126.60
192.162.19.34
217.23.10.139
It changes after about 5 messages.
 
Because of all this outgoing traffic, I am being blocked by google and Facebook.  On Facebook, I get a message " For security reasons, your account has limited access to the site for a few days. If you have any questions, please contact our Help Center."  I have sent numerous messages to them asking why and how to fix it but they haven't answered and it has been 11 days.  On Google I get a warning saying my ip address may have been hijacked and I need to enter a code so they know I am not a robot.  This is a very strange problem that I would love some help.  I have exhausted all my knowledge on fixing this.  My computer has been cleaned with MS Essentials and Malwarebytes, but I still have this problem and am still blocked from web pages due to this undesired outgoing activity.
 
Any help would be appreciated.
 
Thank you very much
hwg

Answer:Constant Outgoing traffice from random IP addresses being sent

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to t... Read more

17 more replies
Relevance 51.25%

Hello,
I have found an incredible software on the internet (SUNNYSIDESOFT | VirtualTablet ). It has only one issue - it constatly inputs mouse 1 when I touch my tablet screen (as it should...), but I don't want it. I need only tracking, so theres my question:
Can I disable application's mouse 1 input, so it will only track mouse position?

More replies
Relevance 51.25%

Is there a way in Windows 2000 to specify a separate printer for an application without changing the default. Both printers are network printers. Example:

Microsoft Word automatically prints to Printer 1.
(User doesn't have change from the default printer to Printer 1 when print options screen comes up. It is already set. )

All other applications print to Printer 2 (the default printer).

Thanks in advance.

More replies
Relevance 51.25%

I have tried several personal firewalls and have yet to find one of the free ones that will allow you to set firewall rules that allow only a specific ip or ip's to connect to a specific application. Most only have a trusted ip list.

Online Armor has this functionality but not for the free version.

I dont recall whether comodo has this ability but I did not like that comodo would have several outbound connections even when I did not have anything that should be connected out to the internet (something to do with cloud?).

Answer:Firewall that blocks application connect to specific ip?

It seems that the Windows' built-in firewall might be able to do what you're after by creating a new custom rule.

4 more replies
Relevance 51.25%

The DistributedCom error message appears in Event Viewer on ALL my personal computers only the CLSID, APPID and NT SIDs change.

I know the CLSID and APPID, how can I identify the software these numbers represent?
I know authority to launch the service for user S-1-5-18 has not been granted, who is S-1-5-18?
I wonder how to use the Component Services Admin tool to grant local launch permission, assuming launch is desirable.

KCav

Answer:How to modify application specific security settings

For S-1-5-18 see: Well-known security identifiers in Windows operating systems

1 more replies
Relevance 51.25%

I have an IR receiver constantly attached to my computer. One program I use always registers it as a game controller, and stops me from using my actual game controllers in favor of it. Is it possible to automate disabling the IR receiver while the program runs, and re-enabling it after the application closes?

Answer:Is it possible to disable a device while a specific application runs?

Hi, if you know or can find a command to disable it, you can write a simple Autohotkey script- for example, a loop that periodically tests to see if your game is running, and if so, disable the device.

(Autohotkey is free and well supported- it can be programmed to test for the presence of a particular process in 1 line).

Probably 5 lines would suffice.

It comes with a comprehensive help file, detailing each command with examples.

AutoHotkey Beginner Tutorial

Or you could create a shortcut to a script that
a. launches the game
and
b. disables the device and exits when you choose.

1 more replies
Relevance 51.25%

Hello,
I have found an incredible software on the internet (SUNNYSIDESOFT | VirtualTablet ). It has only one issue - it constatly inputs mouse 1 when I touch my tablet screen (as it should...), but I don't want it. I need only tracking, so theres my question:
Can I disable application's mouse 1 input, so it will only track mouse position?

More replies
Relevance 51.25%

Hi,

I have had repeated BSOD with message (DPC_WATCHDOG_VIOLATION) on a Lenovo E550 running Win 10 Pro 6 bit (upgraded from win 8.1pro 64). It occurred:
1. on sleeping, and
2. seemingly randomly. i.e. with applications open, idle with no applications open

I seem to have got around (1) by unchecking the "Turn on fast startup" option in Power Options. but the BSOD continues to occur at other times.

I have used the Lenovo System update tool to update the drivers it can but have reached the limit of my current capabilities/knowledge so am looking for some help interpreting the dump files and troublshooting

Per BSOD posting instructions I've run the utility and attached the zip file to the post.

Thanks for any advice/direction.

Answer:Repeated BSOD (DPC_WATCHDOG_VIOLATION) no specific application

Hi obiwan,

Welcome to the 10forums.

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from your manufacturer.

Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

3: kd> lmvm atikmdag
start end module name
fffff800`b6420000 fffff800`b7927000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Tue Jun 23 03:34:51 2015 (5588B7BB)
CheckSum: 014A1763
ImageSize: 01507000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please check your manufacturer for driver updates for the sound driver and Intel Storage Rapid Technology driver.
You might want to disable the ISRT service.

Code:
*** WARNING: Unable to verify timestamp for CHDRT64.sys
*** ERROR: Module load completed but symbols could not be loaded for CHDRT64.sys

3: kd> lmvm CHDRT64
start end module name
fffff801`1d4b0000 fffff801`1d633000 CHDRT64 T (no symbols)
Loaded symbol image file: CHDRT64.sys
Image path: \SystemRoot\system32\drivers\CHDRT64.sys
Image name: CHDRT64.sys
Timestamp: Tue Mar 10 06:36:29 2015 (54FE82DD)
CheckSum: 00177D4B
ImageSize: 00183000
Translations: 0000.04b0 0... Read more

8 more replies
Relevance 51.25%

Hello,

I use Tunngle to game online through LAN, and it uses a service named TnglCtrl.exe which uses 10mb of memory idle. Even though when I am not using Tunngle, it starts. If i close the service, Tunngle will refuse to run. So I would like to know if it is possible to do the following:

In Services, I set TnglCtrl.exe to Manual startup. When I would like to start the Tunngle application, TnglCtrl.exe would start automatically. Is this possible?

Thanks,
Slasher

Answer:Starting a specific service when opening an application

Just have it on all the time...10 MBs of RAM is absolutely NOTHING.
You have way to much RAM to be concerned over this.

8 more replies
Relevance 51.25%

This is a question concerning anonymity and maintaining privacy. I can use a proxy server, http or socks, and that shows I am connecting from another address than my home IP. However, some sites also track things like browser language and time zone. Language I can simply change by using an English version of my browser rather than a Swedish one, but what about the time zone? Even if I connect through say a US proxy, it will show my time zone as central European.

The question: Is there any way to either prevent the time zone from being detected through the web, or change the time zone which is displayed? I know I can of course just change the time zone of my system but I'd rather not as it will mess up logs and such. If there is another way of doing it, either with what utilities are in place or by additional software, I'd love to hear about it.

Thanks in advance.
 

More replies
Relevance 51.25%

T420Plugged into power.Power set to maximu. Seems to only affect one program i.e. AS400 When on battery, it seems to be normal, only when plugged in, does it dim the screen when on that application. You open up mycomputer or anything else and it will be back to normal.  -Aaron

Answer:T420 - Dims automatically for specific application

Wow, how do I enable that feature on my notebook. Niffty.





T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

1 more replies
Relevance 51.25%

Hello Everyone,
I am in a need of a software that will have application specific settings.
The software should
1.Stop dwm service
2.Kill sidebar.exe
3.Kill Rainmeter.exe
4.Change power plan
5. Start the program(game I want to start)
When the game ends
6.Restore dwm,sidebar,rainmeter,power plan.
It would be great if the software enable me to have a shortcut to start the app with those settings....
Thanks for viewing...
I use Windows 7 64 bit

Answer:Turbo mode for specific application(esp. games)

Ahh! I think I have no other way using vTask Studio
I can then edit its shortcut to the game's icon ...
Going to do for all my games ..

1 more replies
Relevance 51.25%

I have a laptop on my desk just for testing external access issues to our sites. I'd rather not.

I know it's been asked.. I think I've read over 20 posts on it with no clear and simple solution.

On my windows7 x64 station I have a hard wired LAN Network Connection and a USB wireless network conection. If both are up, IE uses the wired Lan connection. If I disable that LAN connection, IE uses the wireless. Great.. but?

What If I want to have both up? Reading emails and and accessing other intranet resources normally, but surfing via the wireless. Or even better, surfing from a specific browser or instance of a browser through the wireless Connection, and all others using activity through the wired Lan connection?

I'd like to do this without a Proxy or a VM. I understand there is a product called ForceBindIP that sounded very promising, but it does not support Windows 7 yet.

Is there maybe a firewall setting to route port 80 and 443 traffic to a specific Lan connetion? How about tweaking setting of the wired lan connection so that it fails to find DNS servers or anything on the outside?

I'm somewhat surprised this is not a setting somewhere already. I see great value having this.

Thanks.

Answer:Forcing an application to specific Network Connection... AGAIN!?

Cisco has a software that can do this but I'm not familor with it and don't know much about it,you might even need a Cisco router to use the software.

2 more replies
Relevance 50.84%

I purchased a game that has a known sound issue. It only plays all of the sound when using Stereo sound. 5.1 sounds are sadly incomplete. Currently I only know how to change all sound on my system to either be Stereo or 5.1. Is there any way that I can set this one application to use Stereo sound? Perhaps with a third party app?

More replies
Relevance 50.84%

Greetings everyone.  I've been dealing with this annoyance for two years.  I've been in contact with the support staff for the application, and have tried everything suggested, but the issue still stands.
 
The application is League of Legends.  The issue is when the game tries to launch lolclient.exe, I get this error: "Unable to connect to the server.  If you have a firewall, it may be blocking the connection.  Please refer to your firewall's documentation.  Would you like to retry the connection?"  
 
If I click "Retry," I'm stuck on a black screen for ~30 seconds and then it loads successfully.  Sometimes it waits for ~30 seconds, prompts the error again, and then it's successful.  It always eventually succeeds, but it takes a while to get there.  Besides using a VPN and replacing hardware, I've tried literally everything suggested by the community and the staff.  All necessary ports are forwarded and confirmed as open.  I do not experience any persistent network issues besides this one. 
 
I know that it's not actually related to my firewall for two reasons: 1. it happens on ANY computer on the network, regardless of software.  If I use the computer on another network, it connects immediately, and 2. I've completely uninstalled my firewall software, disabled Windows Defender, and ensured that all firewall-related services were stopped.  The router's internal firewall is disabled. &#... Read more

More replies
Relevance 50.84%

Thank you all for this forum
I want to do the following
increase width of an icon for a specific application application not all icons

I see this method

Registry Editor ->
HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics -> MinWidth
but it change in all icons
I want to do that for a specific icon
Could any one help for that ?

Answer:Change Taskbar Icon Width for a specific Application

Hello Mialbedwy, and welcome to Seven Forums.

You could use the same method of pinning the Recycle Bin to the taskbar in a folder as a toolbar, but use the application you want instead of the Recycle Bin. This will give it a wider space.

Recycle Bin - Pin to Taskbar

Hope this helps,
Shawn

2 more replies
Relevance 50.84%

Hi,
I downloaded a bespoke appn from a site called www.bobbooks.co.uk that allows you to put together your own pictures into specific book types and they then produce a proper coffee table stylebook, ideal for wedding pictures etc.

But for some reason as soon as I open the application it is trying to connect to the internet to check for updates as it is supposed to do and it cannot reach the server it's trying to. Similarly if you try and manually update it this happens.

I have allowed it as an exception in Windows Firewall so other thought is it's something to do with my router settings. Any suggestions? I can't understand why this would be the case though because AVG, Spybot, Adaware etc etc have never given me a problem like this and I've never had to manually configure my router in any way (it's a fairly standard Netgear one.)

I tried installing the same software at work and it worked straight away, so clearly it is something to do with my setup at home. Sigh....

I contacted Bob's Books and they said they've never had this problem before. And with the best will in the world they are not techies.

Any suggestions greatfully received as the (new) wife is hassling me to get it sorted so she can sort the wedding and honeymoon pictures out. Whoever said married life would be all bliss....

thanks,
Jonathan
 

More replies
Relevance 50.84%

7/25/04

Hello,

I am writing this because I am seeking help with an Email related issue.

I am trying to use a program that retrieves Inbound Email attachments and resends them to a new destination… it is a dispatch program.

The Help Files associated with this program make reference to “The Attachment Folder” from “My Email Program”.

I am currently using Microsoft Outlook 2000 as my Email program although… I also have Outlook Express as an optional email program that I could use.

I would prefer to stay with Outlook 2000 though…
“if possible”.

I am enclosing an excerpt from the “Help” File associated with this program so you can see their exact reference to an “Attachment Folder from my Email Program”.

I have tried contacting The Program Manufacturers Tech. Support but as yet have not heard back from them.

I am looking for any advice or direction to be able to Locate and Identify this “Attachments Folder” in “my Email Program” that they make reference to.

If you can assist or advise me in any way I would appreciate it very much, as I am completely lost as to what to do next.

My Operating System is Windows 98SE.

Thank You
Respectfully
Mike Santos

My email address is à [email protected]
Excerpt from The Program Distributor… “as Follows”

If you want to automatically scan for information sent by email, add the attachments folder of your email software to the list of folders to scan.

The Program is “Express Delegate” and it is available... Read more

Answer:Simple Program Application Question Re; A Specific Folder ???

Outlook does not save the attachments in a "separate folder", it bundles them up with everything else in a .pst file.

Other email programs such as Eudora use an attachments folde, located wherever you want it. Looks like thats what the program is designed for?
 

1 more replies
Relevance 50.84%

How To Turn Off User Account Control (UAC) For A Specific Application i am using windows 7 and mcafee anti-virus i m geting tat question every time i use it....it s irritating!!!!

Answer:How To Turn Off User Account Control (UAC) For A Specific Application

Hi,

You may find this post helpful
Can you turn UAC off for a specific program?

Regards,
Jamie

1 more replies
Relevance 50.84%

As the title indicates, I'd like to restrict the amount of bandwidth or internet access speed of a specific application on my PC. Preferably during certain times only, but even a way to enable and disable this rule as I need would be fine.

I have a 1Mb ADSL with a measly 3GB monthly cap (it's painful, can't afford more at the moment though), and Steam turns out to be the nastiest, bloated, deceptive, sneaky, bandwidth-whor........<a while later>........ piece of software ever released to the world at large.

So, I keep setting all my games to "Do not update automatically" (which needs to be re-set after each time a game is run), and it supposedly doesn't download updates or patches while a game is being played... Despite this, if I decide to play Borderlands, after launching the game I have to alt-tab into Windows, go to Steam, and pause the next "Suspended" 250MB or 300MB update that it's busy downloading... I may have a slow connection by most of your standards, but at a pretty constant 100KB/s, 3GB isn't exactly going to last me that long.

Now, I do have a service from my ISP that gives me 5 times my download cap between 1am and 5am (more info, if you like).. So I can get a theoretical 15GB a month if I play my cards right. Is there any firewall out there that will allow me to limit the access speed of Steam to 5KB/s or 10KB/s during specific times...?

Please note: I've tried NetLimiter's trial, and it works perfectly, but it's a bit pr... Read more

Answer:Limit Bandwidth / Internet Access for Specific Application?

Has nobody got any suggestions...?

4 more replies
Relevance 50.84%

HI I was wondering if anybody knew of a way to show a particular app on all virtual desktops. I have a password manager that interacts with any window that requires a password and I dont want to have to move it every time I have a window that requires access to it. I like my applications separated into separate desktops as it is now, but a few applications I need to see on every desktop. Is there a way to do that?

Answer:Windows 10 Task View: Showing a specific application on all VD's

trinsic said:

HI I was wondering if anybody knew of a way to show a particular app on all virtual desktops. I have a password manager that interacts with any window that requires a password and I dont want to have to move it every time I have a window that requires access to it. I like my applications separated into separate desktops as it is now, but a few applications I need to see on every desktop. Is there a way to do that?



In Task View, right click on an application:

5 more replies
Relevance 50.84%

Background:
I have an desktop application I use for nntp, but I can't associate nntp with my app in windows 8. I never had a problem on windows 7 and prior.


Question:
How do I manually configure windows8 that nntp should be handled by my application? When I go through control panel, it only lets me add apps from windows app store, or Google Chrome. I do not see how to add my app to the list of apps.
Thank you in advance for your time.

Answer:Associate NNTP Protocol to a specific application in Windo

In the classic Control Panel, find "Associate a file type or protocol with a program" ans scroll all the way down. Is NNTP listed under protocols?
If so, what happens when you click "Change program"?
If not, what kind of software is it? Does it come with the installer?

10 more replies
Relevance 50.84%

In Windows 7, the input method is application-specific, i.e., when you change the input method in one application, it doesn't affect other applications. However, in Windows 8 this seems to be changed: the input method is system-wide.

The problem is: I need to use Chinese input (either the embedded Windows Chinese input, or the one from Google, I prefer to use the later), which seems to only use US keyboard layout. However, I am using Finnish layout, so the locations of symbol keys are different. I need to frequently switch the input methods, which is really annoying. I really miss the one in Windows 7: the Chinese input was only effective for the application I needed to type Chinese

More replies
Relevance 50.84%

Hello,
I have several versions of an application (Adobe After Effects) installed (I help test out prerelease versions of the software - which is nice) and I'd like to be able to set the precise application / file type association.

If I get a file's properties and 'Change...' the 'Opens with:' and browse to the exact application I want it to open with (After Effects version 13.6x123), then Apply/OK it, when I open the file, it just loads up the oldest version of the app (After Effects version 13.2) that Windows can find. Is there a better way to set filetype associations than the broken method that Windows is clearly attempting to use?

I have four versions of this app currently installed, all in C:\Program Files\Adobe. 90% of the time, I want to use the latest version, but occasionally need to use an older (public release) version to check how certain bugs/behaviours have changed, so need to keep all those versions installed.

I can use the workaround of opening the specific app and File > opening the file from within it, but it would be nice if I could get Windows to behave properly. Any suggestions would be greatly appreciated!

~ Paul

More replies
Relevance 50.43%

is there any software out there that will tell me how much upload and download bandwidth is coming from what processes on my machine, and possibly total it up over time? i'm cureious to see how much things like dropbox are affecting my monthly bandwidth caps and also wanting to make sure i don't have any apps that are sneaking stuff over my lines. (for windows btw)
thanks!
 

Answer:Solved: program to track application-specific bandwidth usage?

7 more replies
Relevance 50.43%

I've looked around quite a bit on both this forum and Google and can't seem to find an answer, so if this has been answered before, please forgive me and be so kind as to provide a link to a relevant topic.

I am using a TiddlyWiki stored on a USB flash drive. What I would like to do is set a parameter on the shortcut so that it always launches with a specific portable browser, also stored on the pen drive, rather than the defauly browser that is stored on the computer it is attached to.

Likewise, I have a few PDFs that I use regularly between machines, and would like to have them open using a portable PDF reader (Sumatra) which is also stored on the flash drive. That way, the PDF will always open to my last saved page, regardless of which machine I am using.

The computers I use are a home desktop PC (Win 7), home netbook (Win XP) and work laptop (Win XP).

If there is a different way to achieve this without using shortcut parameters, I would be more than happy to give it a whirl.

Cheers!
Matt
 

Answer:Solved: Setting shortcut parameters to open with specific application

6 more replies
Relevance 50.43%

My goal is to start Windows Event Viewer from a command line, with the Application node already selected, showing only entries for my specific application, or provider? In other words, I need to filter it by the Source column for the "Application X" using command line call:



So far I could figure out that I need to do this to show Application node:


Code:
eventvwr /c:Application
but I can't figure out how to specify provider in the /f: parameter, and the example given if I run "eventvwr /?" does not help much.

Any idea how to do it?

More replies
Relevance 50.43%

I'd like to ask if it is possible for a non-administrative account user to run a specific application that requires elevated privileges without supplying administrator's password? Is there perhaps a possibility for the administrator to create a rule for the standard user, so that the user will not be prompted for password?

Answer:Running specific application with elevated privileges without admin password?

Found an article that seems might be able to help here - How to launch a program always elevated under Vista UAC. Will try this approach later today and see if it can be applied to a lower standing acount.

2 more replies
Relevance 50.02%

how do i attach base to new hp 25XW monitor?










Solved!
View Solution.

Answer:Received a new HP monitor and have insufficient info to get ...

A part was missing. Went fine when all pieces were present.

2 more replies
Relevance 49.61%

hello everyone, this is my first post so i hope that i can explain myself well enough so you can help me.

i have a problem with my base unit i think the model is a acer aspire G505, specs below. AMD Athlon XP 2600+ / 2.13 GHz, Chipset Type NVIDIA nForce2 IGP , 512 MB RAM DDR SDRAM, AGP - integrated Graphics Processor / Vendor NVIDIA nForce2 IGP i am running windows xp home, if you need me to provide anymore details then i can try my best to get them for you.

essentially the problem is that i turn the computer on and the windows screen appears and the computer boots up (i think ) and after that the monitor loses signal and goes black, the strange thing for me is that the desktop has still loaded i believe because to shut the computer down again i can use the start key on the keyboard and use the keyboard shortcuts to shut the computer down. i have not dropped the computer at any point, i transported it from university and back home and thats when it has developed this issue, i have opened the box and all the cables seem to be secure on the motherboard but other than that my skills are limited im afraid.

i would be very gratful to any help that anyone can give me about this problem.

yours sincerly

Mark Piotrowski
 

Answer:No signal received by the monitor after the windows screen

what about safe mode? if it does boot maybe you have wrong monitor refresrate setting? too high?
 

8 more replies
Relevance 47.56%

I watched a video a while back of a guy doing a "Can Your Mac Do This?", and his boot time was under 20 seconds, everything loaded flawlessly, and he simultaneously ran 37 internet explorer tabs all watching videos at the same time to prove his speed. But on the bottom left where his taskbar was, he had a few monitors in the system tray. They were multi-colored and displayed the load on each core, percentage wise, and I've been trying to find this monitor but to no avail. Here is a picture of it, do any of you know where I may get this specific program?

I'm not saying his is displaying percentage wise, it could be something else all together, but the thing is, I'm curious about it, I can't ignore something once it catches my interest, so if anyone knows where I can get it, please let me know

[Edit: I forgot to add why the picture was blurry, the video on youtube was recorded on a camcorder, instead of recording software, so I grabbed a picture as best as I could, just thought I'd throw this in there so you all didn't think I was using a potato camera or something.]

Answer:Cant Find Specific CPU Monitor

That looks like a blurry version of Core Temp (use the U.S. Mirror). It actually shows core temperature instead of percentage and can display on the desktop or in the notification area of the taskbar (I do the latter). It's what I use on my desktop machine and notebooks—I run it full time from startup—and I've been very happy with it.

Potato camera? Is there such a thing?

7 more replies
Relevance 46.74%

Yesterday I attempted to build a £600 PC at home with parts I bought from Amazon. Here are the specs:
GPU - EVGA GeForce GTX 960 SSC 4GB
CPU - Intel Core i5 processor (previous model)
PSU - EVGA 600W
Cooler - CoolerMaster Hyper 212X
Mobo - ASRock micro ATX, LGA1150 Socket, Intel B85 Express
RAM - Corsair Vengeance 8GB (2*4GB) DDR3 1600Mhz

Now, when I plug everything in and power it up, everything seems to work perfectly except my monitor gets no signal. The mouse and keyboard do though.
I've spent hours reseating RAM sticks, resetting the CMOS battery, pretty much any solution I could find on the web. Out of the many times that I tried powering it up to test if it was working, it worked 3 times. Each of the times that the monitor received a signal was when my GPU was seated in the motherboard but not plugged into the power supply. With the exact same configuration that made it work, I shutdown and turn it on again to see no signal.
The conclusion I found was it only seemed to work on the first time after reseating and replugging everything in and while the GPU was unplugged from the PSU.
On the third time the monitor received signal, I took the opportunity to install windows, which in the process, made the system restart many multiple times with no problem at all. When I arrive at my desktop, I restart the PC manually, and it's fine. However, when I manually shutdown the PC, the monitor receives no signal once again when turning it back on.

I can't rule out ... Read more

Answer:Monitor only gets signal in specific configuration.

8 more replies
Relevance 46.74%

Yesterday I attempted to build a £600 PC at home with parts I bought from Amazon. Here are the specs:
GPU - EVGA GeForce GTX 960 SSC 4GB
CPU - Intel Core i5 processor (previous model)
PSU - EVGA 600W
Cooler - CoolerMaster Hyper 212X
Mobo - ASRock micro ATX, LGA1150 Socket, Intel B85 Express
RAM - Corsair Vengeance 8GB (2*4GB) DDR3 1600Mhz
Now, when I plug everything in and power it up, everything seems to work perfectly except my monitor gets no signal. The mouse and keyboard do though.
I've spent hours reseating RAM sticks, resetting the CMOS battery, pretty much any solution I could find on the web. Out of the many times that I tried powering it up to test if it was working, it worked 3 times. Each of the times that the monitor received a signal was when my GPU was seated in the motherboard but not plugged into the power supply. With the exact same configuration that made it work, I shutdown and turn it on again to see no signal.
The conclusion I found was it only seemed to work on the first time after reseating and replugging everything in and while the GPU was unplugged from the PSU.
On the third time the monitor received signal, I took the opportunity to install windows, which in the process, made the system restart many multiple times with no problem at all. When I arrive at my desktop, I restart the PC manually, and it's fine. However, when I manually shutdown the PC, the monitor receives no signal once again when turning it back on.
I can't rule out that the pro... Read more

More replies
Relevance 46.74%

Hi Folks,

Bit of a curly problem for you to ponder which has me a little baffled.

I've got a perfectly functioning computer here which works on all displays I can find except for one model of display, the ViewSonic VA2448m-LED. Weird huh?

Gets even weirder, not only does it not work on one of these displays but I've tested this on 3 different VA2448m-LED screens, all with different cables (2 different VGA cables and a DVI) and it still doesn't work. Even testing with other 24" screens it works fine.

This problem has only started today and I have a new Graphics Card on order to see if that is the source of the problem. I believe the Graphics Card these are running are the little Gigabyte GeForce 210's.

Any ideas would be appreciated before I smash the wall I'm banging my head into.

S

More replies
Relevance 46.33%

I have three monitors. Currently, the login/sign in screen is on the far right monitor. How do I configure so that the login screen is on the far left monitor?

Answer:How to show login screen on a specific monitor?

Hello Charlie, and welcome to Ten Forums.

The sign-in screen will usually show on the monitor you have set as your main display by default.

https://www.tenforums.com/tutorials/3...dows-10-a.html

3 more replies
Relevance 46.33%

I have a strange problem with my second monitor. I use my laptop to do all my work, I have a second monitor (Gateway FHX2300) that connects to my laptop using a HDMI cable.

Whenever there is enough of a specific shade of blue displayed on the second monitor, part of or the entire second monitor would flicker, and look a bit static-y. The shade of blue that seems to make my second monitor go into fritz is the same dark blue used on the top of this page (that is why I am typing this on my primary monitor). It's also the same blue as the Windows 7 login screen so *sometimes* when I open my laptop, the screen would either look extremely distorted or be completely black with few seconds of the top or middle of bottom of the login screen showing but still looking distorted and static-y.

If my second monitor becomes all distorted I can Print Screen and paste it on Paint but the static and distortion won't show up if viewed on my primary monitor. I tried print screening this page with the dark blue above while the screen looked static-y. When viewed from my primary monitor it looks fine but whenever I drag Paint to my second monitor with the dark blue of this page in it, the flicker would come back. If I drag Paint back to my primary monitor, the static would stop again. I can literally do this back and fourth to repeat the static.

Is this a problem with my HDMI or my second monitor? Is there a way to fix this by myself?

Answer:Second monitor flickers when there is a specific shade of blue

have you tried to adjust the screen resolution or the refresh rate for the screen(s)? If not I would try doing that first and see if changing it does anything for ya. If not; you probably have some sorta issue where the graphics capabilities of the graphics chip just dont dont have what is needed to provide full color on the screen and monitor.

3 more replies
Relevance 46.33%

We have multiple client applications that we want to open on quad monitors so each opens on a different monitor maximized. Using some internal VBA we opened the screen, moved it appropriately, then maximized it. However, it looks like if the application does not start maximized, the software messes up the resolution and adds 14 pixels to the height and width. (I think this is an internal workaround created by the software) If we tell it to start maximized, then simply place the application on the desktop on the appropriate monitor, it will open there and look great. (For example, you take the application, put it on desktop of monitor 2, it will open maximized on monitor 2, move the same app to monitor 3, it will open on monitor 3). I need a way to automate this open for all for applications or put in the shortcut to pretend that it is being opened from a particular monitor or something.

All the solutions I have found so far involve changing registry keys or moving the screen not maximized. I dont believe there are any registry keys involved since if I move the application, it opens differently, and as I stated previously, maximizing after the fact messes up this software.

Is there a batch file command or something like that?

Answer:Shortcuts to Open on Specific Monitor (FactoryTalk)

Hi Sute,
what kind of FactoryTalk application do you use?
Network Distributed?
If i understand correctly, you want to open four runtime (*.cli) on 4 monitors?

1 more replies
Relevance 46.33%

Recently my monitor went a bit weird. The bottom left corner is really faded and has faint horizontal lines. Sometimes an image stays there after it has changed. When I open the monitor's menu there are vertical grey/black lines going the whole way up the screen from the top of it.
This is the weird bit. When I open an application that changes the cursor such as a pdf reader that makes your cursor a hand it acts strangly. The cursor isn't faded and vertical lines prodrude from the top all the way to the top of the screen. It acts in exactly the same way as the monitor's menu. I have tried recreating the cursors on paint but it never happens in any situation. This leads me to think that the cursors are being rendered by the montitor but that seems insane. I'm not looking for a fix I am just interested as to why it's happening.

Thanks
Joe
 

More replies
Relevance 46.33%

I have a Geforce GTX 670 in my system and running the latest WHQL drivers from nVidia. I'm looking for a method of forcing games to load on a specific screen. I play FFXIV:ARR mainly and it has the in game option of selecting which monitor to display on when running in borderless window mode...no issue with this game. For my other games, I would like to find a way to make them default to a screen of my choice such as my secondary monitor or my 50" LCD TV. Essentially, I can manually select which screen is default/primary so that games load on these screens but would rather find a work around to force loading on specific displays. Any thoughts?

More replies
Relevance 46.33%

Yesterday I attempted to build a ?600 PC at home with parts I bought from Amazon. Here are the specs:GPU - EVGA GeForce GTX 960 SSC 4GBCPU - Intel Core i5 processor (previous model)PSU - EVGA 600WCooler - CoolerMaster Hyper 212XMobo - ASRock micro ATX, LGA1150 Socket, Intel B85 ExpressRAM - Corsair Vengeance 8GB (2*4GB) DDR3 1600MhzNow, when I plug everything in and power it up, everything seems to work perfectly except my monitor gets no signal. The mouse and keyboard do though.I've spent hours reseating RAM sticks, resetting the CMOS battery, pretty much any solution I could find on the web. Out of the many times that I tried powering it up to test if it was working, it worked 3 times. Each of the times that the monitor received a signal was when my GPU was seated in the motherboard but not plugged into the power supply. With the exact same configuration that made it work, I shutdown and turn it on again to see no signal.The conclusion I found was it only seemed to work on the first time after reseating and replugging everything in and while the GPU was unplugged from the PSU.On the third time the monitor received signal, I took the opportunity to install windows, which in the process, made the system restart many multiple times with no problem at all. When I arrive at my desktop, I restart the PC manually, and it's fine. However, when I manually shutdown the PC, the monitor receives no signal once again when turning it back on.I can't rule out that the probl... Read more

Answer:My monitor only receives signal in a very specific configuration.

Your motherboard has a VGA built-in.Have you fully tested the system with the VGA only and not the GPU?Some GPU cards require c a very specific install procedure. Did you use the method recommended for the EVGA GeForce GTX 960 ?Is your card in this list?http://www.evga.com/support/manuals/If so, please indicate which manual applies. I want to see what special instructions the maker has given.

1 more replies
Relevance 46.33%

Yesterday I attempted to build a ?600 PC at home with parts I bought from Amazon. Here are the specs:GPU - EVGA GeForce GTX 960 SSC 4GBCPU - Intel Core i5 processor (previous model)PSU - EVGA 600WCooler - CoolerMaster Hyper 212XMobo - ASRock micro ATX, LGA1150 Socket, Intel B85 ExpressRAM - Corsair Vengeance 8GB (2*4GB) DDR3 1600MhzNow, when I plug everything in and power it up, everything seems to work perfectly except my monitor gets no signal. The mouse and keyboard do though.I've spent hours reseating RAM sticks, resetting the CMOS battery, pretty much any solution I could find on the web. Out of the many times that I tried powering it up to test if it was working, it worked 3 times. Each of the times that the monitor received a signal was when my GPU was seated in the motherboard but not plugged into the power supply. With the exact same configuration that made it work, I shutdown and turn it on again to see no signal.The conclusion I found was it only seemed to work on the first time after reseating and replugging everything in and while the GPU was unplugged from the PSU.On the third time the monitor received signal, I took the opportunity to install windows, which in the process, made the system restart many multiple times with no problem at all. When I arrive at my desktop, I restart the PC manually, and it's fine. However, when I manually shutdown the PC, the monitor receives no signal once again when turning it back on.I can't rule out that the probl... Read more

More replies
Relevance 46.33%

Hello, could someone tell me if its possible to have my laptop have windows media player playing on my secondary monitor whilst still having my main monitor free to let me work at the same time?

Thanks.

Answer:Set specific apps to work on secondary monitor?

Hello PainlessTorture,
If your second monitor will work on your laptop, then yes you can, i have mine playing music or videos all the time when I'm surfing.
You need to set it as "extended desktop".

5 more replies
Relevance 45.51%

Help Appreciated.

In a Windows 8 PC, User account is "Standard" and Administrator account is different, in which how can I exclude some application which is from asking administrator password to execute?
My situation is specially for application updates such as java and/or adobe reader. Each time, when there is an update, it is asking administrator password to run the same.
Kindly assist.

Answer:Exclude specific application execution in "Standard User"

Hello Anil, and welcome to Eight Forums.

Normally you could use an option in the tutorial below to prevent standard "users" from being able to run a specific file.

Applications - Prevent Running Specified Programs - Windows 7 Help Forums

However, in this case, the user isn't the one running the application. The applications are set to automatically check for updates, so they're running themselves instead. If you turn off the check for updates automatically option in the java and Adobe programs, it should stop this. You will of course need to manually check for updates afterwards every so often though.

Hope this helps,
Shawn

1 more replies
Relevance 45.51%

Here is the error I am getting and it makes it so we have to reboot the PC when it happens? How can I fix this ?




1001


Windows Error Reporting


N/A


1/25/2017 2:36 PM


CPC-VNG








Message:


Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0

Problem signature:
P1: Spectrum.exe
P2: 9.0.0.0
P3: 56089bae
P4: be5b
P5: 0
P6:
P7:
P8:
P9:
P10:


Attached files:
C:\Users\CPC - VNG\AppData\Local\Temp\WERED0E.tmp.appcompat.txt
C:\Users\CPC - VNG\AppData\Local\Temp\WERED5D.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\CPC - VNG\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppHang_Spectrum.exe_50dc70ec2178cd4cd23a7c45d49df59424de3092_1d0bed7b

Analysis symbol:

Rechecking for solution: 0
Report Id: a9139c79-e34e-11e6-8c87-605718e18f97
Report Status: 1


Thank you for your time.

More replies
Relevance 44.28%

Hi

I have 2 servers and want the main server WFS1 has dual nics for different networks.

I want to configure the main server WFS1 to pass data to WFS2 for terminal services.

My router config will direct the terminal server traffic to WFS1 however this is a SBS2003 machine and will not allow more than 50 users to logon!

My second server is Standard 2003 and can handle the workload however I am not sure how to configure the first server to achieve this.

The router is on a 192.168.1.X subnet and WFS2 is on 192.168.4.X subnet, remember WFS1 (where the router is currently pointing) is on a 192.168.1.X and 192.168.4.X (as it has dual NICS)

Short of installing another NIC into WFS2 I am sure there is a way to 're-route' the traffic to WFS2.

Any ideas?
 

More replies
Relevance 43.87%

I am using Etrust and got this message the other night, "true vector monitor failure" as my firewall shut down. I rebooted and it appeared again. I have no idea what a true vector monitor is. So, I shut down my system and it appeared to be fine the next day. However, I would like to know what it is, what caused it and how to avoid it in the furture. I did try to go to the Etrust site and can't get in . Thanks, Babe p.s. im using winxp and IE if it matters. B.
 

Answer:Received error message "True Vector Monitor Failure" from my firewall

True Vector is part of ZoneLab's Zonealarm firewall. I believe Etrust repackages ZoneAlarm.
 

1 more replies
Relevance 43.46%

So far, I have no serious complaints about the OS, and experienced 0 crashes. I tried to install Asus PC Probe II for Vista x64, but received error acpi driver could not be installed. I would like to be able to monitor mb temp. I am still dual booting with xp pro 32 bit and win 7 64. Several months ago I tried installing 4g ram, but xp only recognized 3, and the mb temperature went up (I don't recall exactly how much, but it I remember thinking it was a significant amount). So, I pulled one gig out, and installed a clamp-on fan unit to cool the memory. Now I have reinstalled the 4th stick, and I would like to see what the mb temperature is running under Win 7. Are there any monitors out there that are known to run under Win 7?

Answer:PC Monitor Application

From what I've found, it's not compatible with Win7.

I'm able to use the OC Palm application to look at the Hardware Monitor gadget on my P6T Deluxe

2 more replies
Relevance 43.05%

Im running 3 monitors. When windows goes to sleep and wakes all the open applications are moved between displays and resized. I've google'd and found some topics but, with no resolution. I'd like to be able to pin/stick an application to a display. One monitor is just a 7" display inside my case showing metrics stats. I only want it running there as well as nothing else ever moving to that display. Im open to third party support options as well...

Asus Formula IX (intel 7700)
GTX1080ti (all 3 displays connect to this card)

All drivers are up to date

More replies
Relevance 43.05%

Hi, in our company we have a problem on several machines and we need to monitor some workstations to guess which applications write several folders (with chinese characters that stop backup process), and for that purpose i've been looking for an application.

First I found was Process Monitor, it works quite well, but the log it generates is really huge (gigabytes) even filtering only desired events (file/folder writing on a specific drive), and i'm looking for Reliabilty Monitor that comes with Windows Vista to setup that event logging, but I find no help on that windows feature nor I know if it can be done.

Do you know how to manage to do this with Reliabilty Monitor or other utility that monitors file system activity?

Thanks,
Salva.
 

Answer:File monitor application

If you want to monitor a file/folder on a drive I would think that process monitor would be the choice. You can get a process (application) activity summary at any time by clicking tools on the menu bar, then selecting process activity summary. This will show which applications have written to the file/folder at that point of time.

Of course, you would have to filter by 'path is' which it sound like you are doing. I have attached a copy of the process activity summary below:
 

2 more replies
Relevance 43.05%

Any details of a good (preferably free) PC temperature monitor application.Just want to keep a check, out of interest, on my laptop`s temperature.Cheers.

Answer:PC temperature monitor application.

You can use either Everest Home Edition from:click hereor MotherBoard Monitor from:click here

9 more replies
Relevance 43.05%

Hi.Does anyone know any program to monitor web applications' activity?for example monitor all activities of an antivirus program and see where and how it stores data on system ?thanks.

Answer:monitor web application activity

any answer please?

2 more replies
Relevance 43.05%

Is there an application that moniters your internet connection, so you can view it's speed and if it's online?

Something kind of like the task manager when it moniters system performance.


Anyone know of anything like this or similar to this?


Edit: I'm using OnlineEye(Internet Speed Moniter), and it's not quite what I wanted.

Answer:Network Monitor Application?

Free Network Monitoring software - Google Search

There is also teh Task Manager. Open it up and select the Networkign tab.

9 more replies
Relevance 42.23%

I want to find out what changes (registry, files, etc) has been done by an application installation. Is there any freeware for Windows 7 to keep a snapshot of the system before installing an application and then used the snapshot to report all the changes by the application installation?

Answer:How to monitor changes to system by application installation?

You can do this with Process Monitor from SysInternals. No installation needed. Download and run Procmon.exe.

Click on Help then How to use then look at the info for Registry.

4 more replies
Relevance 42.23%

I am not very computer literate so excuse me if I don't speak "the language", but here goes... My operating system is Windows XP and thats pretty much all I know about this machine. A few weeks ago we had some downed power lines in our area. My computer is on a battery back up but the power surges were coming so fast frequent that instead of seamlessly transferring the power source to the battery, the computer kept trying to restart. It did this three times then I shut it down until the storms past.

When I turned it on the next day I got an error saying the Device Monitor Application failed to initialize and now alot of programs won't open, like Paint and Picassa. Also, I have an all in one printer, scanner, coppier and the coppier and printer work fine. The scanner works (mechanically) but the application it uses to transfer the document to the computer does't work. With these programs I just get the usual Microsoft error saying they are having a problem and asking if I want to repot it.

I can't find anything on the Microsoft site that looks like the Device Monitor Application and I'm concerned that my hard drive is damaged. What do you think, any ideas?
 

Answer:Device Monitor Application failure

6 more replies
Relevance 42.23%

There are a bunch of these, but the ones I have tried all lack the action feature I need the most. I need it to:

Search a specific page for content (url), then click it.

Seems simple enough, but none that I downloaded do this. I use FF and browsed all the extensions already.

Thanks for any assistance
 

Answer:Looking for an application to monitor update to webpages...

So you want an application that checks a certain page (one you specify) every x interval and notifies you when it changes? If so, sounds like a very easy thing to whip up quickly in your favorite programming language. Heck, I'm sure someone here could do it.
 

4 more replies
Relevance 42.23%

Hello, everyone.
I am an illustrator, working with a partner, printing our illustrations on greeting cards, prints, magnets and the like. We're using some low-end equipment because, as artists, we are doing our required amount of suffering before we make it big (I hope).
We use, mostly, Adobe Photoshop for image prep, then Illustrator to put out the final product. 99.9% of our work is in rich color, so we're trying to get as much out of a 6-head Epson printer as possible.
I've noticed differences between the printed result and what appears on screen since I switched printers about 3 months ago. I am familiar with the differences between RGB and CMYK models, the additive and subtractive princples in printing.
I know there's a way to bring the printer around to be more in line with what the monitor shows and have just discovered Adobe Gamma, but have never used it.
Most of the literature I've read so far talks about "profiles", but I haven't seen any real "how-to" instructions.
Is someone able to direct me to a site or information so I can put it all together?
I'd really appreciate the help.
Thanks!
 

Answer:Monitor, printer, application calibration

6 more replies
Relevance 42.23%

Application (Adobe Reader) consistently opens in my external monitor, despite efforts to make it open in primary:
1. Move window to primary, close, re-open.
2. Shut-down Windows, disconnect ext. monitor at monitor, start Win.
3. Move window to primary, re-start Win.

Other aps. do not behave this way.

How can I make the ap. open in primary?

Answer:Application Will Not Open in Primary Monitor

If I understand your question. This may help. Before shutting down go to single monitor and unplug the second screen from the computer at the computer.

4 more replies
Relevance 42.23%

I have been losing my internet connection regularly and I need something to help me determine when the disconnects are happening. Does anyone know of some sort of tool I can use to perhaps ping google or yahoo every 5 seconds then show me all failed attempts?
 

Answer:Application to monitor internet connection

the pint -t command will just keep pinging whatever address you type in.
 

1 more replies
Relevance 42.23%

Hello! Have T500 2056 CTO that came with 160Gb 5200" WD drive and preinstalled W7 PRO x64. Since I had spare 320Gb 7200" drive I replaced and made fresh W7 install -- *not* from recovery disks, but "standard" RTM version. Later installed most of Lenovo apps & tools and I am missing something -- there is ome utility that monitors DVD drive (has own icon) and turn off drive if not in use. Since I installed most of apps I am out of idea(s) what is missing. Thanks,b. PS: is lenovo installation branded? I am asking because of boot screen which is customized (grey with thinkpad logo)  EDIT: found post about T410 ultrabay and first post also include solution to my "problem":http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-Ultrabay-HDD-Question-SOLVED/td-p/2368... [snip]To enable the DVD automatic power off feature, open the Advanced view in Power Manager, go to the Power Plan tab and expand the System Settings dropdown. Now set Automatic Optical Drive Power Off to Enabled on AC and battery. (You'll be able to see and set this setting Automatic Optical Drive Power Off only if your DVD drive is inside of your ultrabay.) After being idle for 5 or 10 minutes your DVD drive will be powered off. Then this new icon (Other E: Powered Off) will appear in My Computer.[snip]

More replies
Relevance 41.82%

Hello, I have aT30 (model 2366 n6g) connected to a docking station.  the graphics system is ATI mobility radeon 7500  16mb ddr 4x AGPOn the back of the docking station  there is of a VGA and a DVI  connection; When I connect two monitors to the docking, it displays the same screen. The laptop is not recognizing the second screen, so I can extend it in order to receive two different screens.  Can anyone advise?

Answer:Can aT30 run with two monitors , each monitor running a different application

download the Omega Catalyst ATI driver, it should allow you to control the display setting a bit better. You should able to use the software to control the extended display property. 

1 more replies
Relevance 41.82%

I'd like to see displayed in real time, what programs on my computer are accessing the internet, and the IP addresses they are trying to access.
Both outgoing and incoming.
Is there a good (hopefully freeware) app that will show me that info?

Answer:Network Monitor application - whats a good one?

'Resource Monitor' which is built into Windows will give you that info without any third-party software (Start Button > All Apps > Windows Administrative Tools > Resource Monitor).

As an alternative, some people may prefer the interface of TCPView by Sysinternals (which is a portable app), as it's a simple interface and it will also give status of the connection too (for example, in the below screenshot it would show that Music.UI.exe is in a CLOSE_WAIT state, rather than an ESTABLISHED state, which Resource Monitor doesn't show).

2 more replies
Relevance 41.82%

I have recently put together a dual monitor setup and now enjoy 24" (primary) and my old 22" as a secondary monitor. Can someone advise of any good applications that Iam able to run on my second monitor which would show me local weather, forecast, time, date, resources currently running, etc... something to make my second monitor useful while I use one for web browsing...

I have currently added about 6 gadgets (mini browser, weather app, clock, CPU Meter, USB Easy removal shortcut gadget and APP Launcher. It kind of does the job but I'd prefer to have one app do it all - if it exists at all...

PS See attachment...

Thanks all for any help!!!

eenbox

Answer:Status running application on 2nd monitor - question

I think rainmeter will do it. However I have never used it so I cannot say for sure.

Rainmeter.net

3 more replies
Relevance 41.82%

Hi! Friend! in my company, I have a problem with end use that use illegal or harmful portable software. I want to know that is there any application or system that can monitor when they're using that soft, it will alert a warning message or send email to them. can anyone share me any idea?Thank for your great idea,

Answer:application to monitor employee internet activity

Disable all USB ports and remove all optical drives, so all your computers just have an internal hard drive. That will stop employees bringing in any software at all and using it on the company's computers.The above will not cost your company any money, just get your systems administrator to do the necessary work.

8 more replies
Relevance 41.82%

How can I hook-up a second Monitor for Dual screen Application.

Just bought another 22 inch monitor need help on hooking-up the second monitor to work as dual screens for One computer.
 

Answer:How can I hook-up a second Monitor for Dual screen Application.

Need a v card with a dvi port & analog port > hook 1 to the dvi & the other to the analog port
 

3 more replies
Relevance 41.82%

Just wanted to see if these even exist. I Googled and came up with weak results. I basically want to see if there is a way I can monitor the usage of power my PSU is putting out and get a basic general Idea of the amount I am using and not using. Anyone know of anything like this?
 

Answer:Solved: Power Usage Application / Monitor?

6 more replies
Relevance 41.82%

I'm looking for some sort of application that can keep track of upstream/downstream bandwidth usage while you're tethering with a phone/using mobile wifi.

does anyone know of anything like this?
 

More replies