Computer Support Forum

Boot Failure - Press any key to continue

Question: Boot Failure - Press any key to continue

I am trying to install 64 bit Windows 7 OS

I have a Windows 7 32 bit system and i have an installation disk of windows 7 64 bit.
When i try to boot the 64 bit DVD after changing the boot order my screen displays :

Boot Failure
Press any key to continue

It repeats ....
Any help ... ?

Relevance 100%
Preferred Solution: Boot Failure - Press any key to continue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Boot Failure - Press any key to continue

Perhaps its a bad installation media. Try create an alternative with a 4GB USB thumb-drive instead:

1. Download the appropriate ISO here
2. Write it to the USB thumb drive using this
3. Boot from USB thumb drive and install

8 more replies
Relevance 101.68%

I already tried making HDD the first priority on BIOS, tried everything but still didnt worked please help need my files badly. How to fix this or any kinds of solution you got there.

Answer:Boot Failure, Press any key to continue. Please help

Hello and welcome Kaiyzen mate first up we need to have some system specs to play with
System Info - See Your System Specs

Secondly how old is the machine and the OS install?

1 more replies
Relevance 99.22%

Recently I decided to try out linux mint. I created a live cd and installed mint as a dual boot with Windows XP Home Edition SP3 on a single hard drive. After installing mint every time I boot up the computer I got the message “boot failure press any key to continue” pressing a key just makes the message repeat. If I reboot and press f12 “BOOT PXE” I could get into the GRUB boot screen and choose what OS I would like to use. After being unable to fix the boot failure problem I deleted the mint partition and merged it with the XP partition.
I still get the “boot failure press any key to continue”screen and I am still able to use f12 to get into xp-it now goes to the welcome screen from whence I am able to access XP-which works fine. I have used the windows install cd recovery console fixmbr, fixboot, chkdsk /p /r and am unable to fix the boot. I have all of the data from the hard drive backed up, however I would rather not do a reinstall. Does any one have any ideas on how to fix this problem? Thank you in advance.
My System..hope this helps: Intel DP45SG Motherboard, Intel Core 2 Quad Q8200 Processor, MSI R4830 Graphics Card, OCZ 2x1GB PC10666 1333mhz memory 500 Watt ATX Power Supply, 320 GB Seagate Hard drive, LightScribe optical drive, Windows XP SP3, couple years old crt emachines monitor, Logitech G5 Mouse, Logitech multimedia keyboard, multicard reader
 

Answer:Windows XP boot failure press any key to continue issue

Have you checked out the boot.ini file? I don't have any experience with dual booting with Linux, but with different Window OS's you can adjust it there. It might be Window's doesn't like Linux at all and they just don't want to get along.
 

1 more replies
Relevance 98.4%

Recently I decided to try out linux mint. I created a live cd and installed mint as a dual boot with Windows XP Home Edition SP3 on a single hard drive. After installing mint every time I boot up the computer I got the message “boot failure press any key to continue” pressing a key just makes the message repeat. If I reboot and press f12 “BOOT PXE” I could get into the GRUB boot screen and choose what OS I would like to use. After being unable to fix the boot failure problem I deleted the mint partition and merged it with the XP partition.

I still get the “boot failure press any key to continue”screen and I am still able to use f12 to get into xp-it now goes to the welcome screen from whence I am able to access XP-which works fine. I have used the windows install cd recovery console fixmbr, fixboot, chkdsk /p /r and am unable to fix the boot. I have all of the data from the hard drive backed up, however I would rather not do a reinstall. Does any one have any ideas on how to fix this problem? Thank you in advance.
My System..hope this helps: Intel DP45SG Motherboard, Intel Core 2 Quad Q8200 Processor, MSI R4830 Graphics Card, OCZ 2x1GB PC10666 1333mhz memory 500 Watt ATX Power Supply, 320 GB Seagate Hard drive, LightScribe optical drive, Windows XP SP3, couple years old crt emachines monitor, Logitech G5 Mouse, Logitech multimedia keyboard, multicard reader

More replies
Relevance 89.38%

Recently, after unplugging my system from its power source (removing power cable from the power supply) and then later reconnecting the power source, the machine will not boot unless a Vista system disc is in the drive upon boot, mind you, not booting from the disc, just having it in the tray and booting to the OS harddrive. If the disc is not present at startup the machine displays the following error message:

DISK BOOT FAILURE INSERT SYSTEM DISC AND PRESS ENTER TO CONTINUE.

If I insert the disc after this is displayed, the machine hangs and does nothing. If I restart my system after inserting the disc, the machine boots as normal.

Attempted fixes:

bootrec.exe /rebuildbcd, /fixboot

Operations complete successfully but they do not fix the problem. These actions were attempted primarily as a shot in the dark. Typically I have encountered this issue when the molex connector or other cabling is loose on the OS HDD, but that is obviously not the issue, since I am posting this from the machine.

OS is currently installed on an IDE drive, set as master on the primary IDE channel.

Any suggestions would be appreciated to save my the extra step in order to boot.

Answer:Disk Boot Failure Insert System Disk and Press Enter to Continue

bootrec /FixMbr

4 more replies
Relevance 86.1%

Upon booting, I get a warning, "System fan faliure ... Press F2 to continue".   First time pressing F2 resulted in a hang.  Booting a second time and pressing F2 was successful in booting to Windows. The system fan is making bad sounds. Where are some good places to buy a replacement system fan for an HPE-180T desktop?  I saw one on ebay, but it's unclear if it is actually new   What are some equivalent fans that might be more reliable ?   What are the specs for the HPE-180T system fan? I looked at the info available on this site, but it does not detail system fan info.  Also, I didn't see a link to buy replace HP parts.  What is the HP parts buy link?

Answer:System Fan Failure .. Press F2 to continue

#HPExpertDayRefer: http://support.hp.com/us-en/document/bph07153 Check for hardware functionality: http://support.hp.com/us-en/document/c03463381 You will find compatible parts here: http://partsurfer.hp.com/search.aspx

1 more replies
Relevance 86.1%

Hello DELL COMMUNITY,
I can't believe this is an unsolvable issue...
my Studio XPS1340 isn't that old...
and my battery was replaced by warranty a little over a year ago...
it was charging fine...then suddenly, when I rebooted, I got:

WARNING: The battery cannot be identified.This system will be unable to charge this battery.Press Any Key to ContinuePress <F2> 2 times to enter SETUPPress <F12> and Any Key to enter Boot Menu
Do I just need to replace the battery?

Answer:WARNING: The battery cannot be identified. This system will be unable to charge this battery. Press Any Key to Continue Press <F2> 2 times to enter SETUP Press <F12> and Any Key to enter Boot Menu

Hi,
I apologize for the inconvenience caused to you. You can follow the steps below:
Drain the residual power of your computer and recaliberate the battery by following the steps below:

Power off your computer. 
Remove all the external peripherals  (printers, scanners or any other USB device) connected to your computer.
Please remove the AC adapter and battery of your computer. 
Press and hold the power button of your computer for 10-15 seconds to drain the residual power. 
Release the power button
Keep the battery out for atleast 2 - 3 hours.
Then insert the battery and charge it overnight with the system powered off.
Insert the battery in and connect the AC adaptor.
Then power on the computer and see if it works.

If the issue still persists, you can update the BIOS of the computer.
Note: Make sure the ac adapter is connected and the battery is charged 10% or above to update the BIOS. Also, disconnect all the external peripherals before updating the BIOS. All the programs should be closed and documents saved.

Click on the below link: http://dell.to/Th8z4k
Click on “Download File”.
Select “For Single File Download via Browser”.
Click on “Download Now”.
Save the BIOS on your desktop.
Once the BIOS is downloaded on the desktop, right click on it and select “Run as administrator”.
Follow the prompts on screen and restart your computer.

 Please reply with the findings.

10 more replies
Relevance 85.28%

Hi
I have an Equium A60 that is coming up with "Resume Failure and Press any key to continue" when I turn it on. This occoured after the battery ran out and it shutdown. Pressing any key does nothing.

I can get into the BIOS if I am quick before the message comes up, and it is set to Boot Mode, not Resume. I have tried resetting defaults, removing Hard Drives and booting from other devices, but it doesnt seem to get that far, so I canot perform a BIOS update either.
Ive had the machine apart looking for a battery I can remove or a reset button I can press, but I wasnt able to find anything.

Is there anything I can do, or is it totally dead for good?

Please help me! Its a second hand laptop, but I have only had it a week! ;)

Simon

Answer:Equium A60 - Resume Failure and press any key to continue

Hi

Could you please check if the HDD was recognized in the BIOS!
If it war recognized you should try to install a new OS.
Boot from the CD by pressing the C button immediately after notebook starting.

You could also try this:
Just remove the HDD slot cover unplugged the HDD and plug it back, turn on the laptop.
If the same message will appear just press the space bar and check if the OS will boot from the HDD.

1 more replies
Relevance 85.28%

I have a problem with my satellite A60.
I have had the computer for about a year and a half and have never had any serious problems with it of any kind. However last week the keyboard started to fail, first with only a few keys out, then the full keyboard.

This never bothered me much because I am quite familiar with Toshiba computers. So I plugged in an external keyboard and I was back in business.

I used it fine up until now but I put the computer into hibernate last night and when I got up this morning it says "resume failure and press any key to continue".
I press keys and nothing happens, it just stays at that screen. I try to access BIOS by pressing esc when I turn the computer on and priority is set to BOOT not RESUME, hover it wont let me highlight it to change it anyways. The computer wont let me boot from cd. Basically its just stuck at that screen and thats it.

I am wondering if there is another way around this or is my computer finished for good. I was running linux fedora the time of the crash.

Answer:Satellite A60 Resume failure and press any key to continue

Sounds tricky but it?s not unresolvable..
This sounds strong like a hardware issue, but I will not say it for sure.

That keyboardthing can be a defective keyboardcontroller, because your error description is describing a similar case which I had with my machine.
I send the machine to my local servicepartner and they exchanged my mainboard and the keyboard and after the repair the error, I had, never bothered me again.

Just a little question: does some fluids come on your keyboard?

nice weekend

Greets

1 more replies
Relevance 85.28%

Hi

Every time my laptop goes to sleep doesn't wake up until I push power button twice. First to shut down and second to go on then I get this message:
Warning: Resume failure
press any key to continue

Please need help to solve this problem
Thanks

Answer:Satellite A50 - Resume failure, press any key to continue

Usually bad drivers or a flat battery causes resume failure.

You could try a System Restore back to a date when Resume was working properly, and update the drivers for your USB Devices.

If thats no help, then maybe its time to backup your data and run Recovery from your Recovery Discs. Its good to do this once a year anyway to keep the system fresh and error free. Windows tends to become slow and errornous over time, due to power looses, viruses, badly written software etc..

2 more replies
Relevance 84.46%

Hi,

I'm having a problem with the HDD (or other component) on a computer, and I'm wondering if anyone would be able to assist me. So, my friend's computer would no longer start up, and he asked me if I could fix it, as I fix computers often, and build my own, etc, so I said sure. When I first got the PC and tried finding the problem, I decided it was the HDD, as the HDD had the "click of death", and was not working or showing in the BIOS. I also put my own HDD in his computer and took it all the way to the "choose partition to install Windows" portion of the Windows 7 set-up, and all seemed fine, but as I had data on the drive I stopped there.

So he ordered a new HDD, as I told him that's the part he needed, and it just got here the other day, and upon installing it, the computer would not recognize it, and was giving me the "Primary Hard Disk Failure, Press F1 to Continue", so I took the drive out of his PC, put it on my main PC as a slave drive, and then ran chkdsk, which turned up no errors. After that I decided to try a different SATA cable, in a different SATA port, and it finally started up fine, and went through the Windows 7 install, but not without problems.

During the first try installing Windows 7, when it got to the point where it needed to restart the computer, it did, but when it came back on, nothing displayed on the monitor, but the computer was running, so I had to hold the power button for a Hard Shut Dow... Read more

Answer:Primary Hard Disk Failure, Press F1 to Continue...

The SATA ports should be backward-compatible, but they are not always. It is a matter of the board sensing the correct drive and adjusting the speed. Some boards don't do the sensing well with some drives and the jumper needs to be used to set the speed manually. If data is requested faster than the drive can supply it, you get corrupted data that looks to the machine just like read errors.
 

1 more replies
Relevance 80.36%

Hi Experts!!
I want to know how I can bypass the start up screen for American Megatrends that says "Press F1 to continue boot" I just want to turn on my computer and it will boot straight to Windows XP without havving to push keys to continue. There is nothing in CMOS or Bios that comes close!! Please Help!!

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 2006 Mb
Graphics Card: Intel(R) Q35 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 381543 MB, Free - 299356 MB;
Motherboard: ECS, Q35T-GB(vPro)
Antivirus: Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
 

Answer:press F1 to continue boot

Have you fitted the NEW DVD drive you were mentioning on a previous thread.
Did the problem exist before or if you have fitted it only since then.
If you have fitted it is the drive working OK.

Check when you do get a boot the time and date displayed on the lower right corner of the desktop, especially after the computer has been off overnight.
It can be caused by a flat CMOS battery
Also check the boot device priority in BIOS.

If for instance you have the first boot device set for a floppy drive, but the computer does not have a floppy drive, that can cause it OR is the boot priority set for a CD drive that is NOT present

So for boot priority set DVD first
the HDD with Windows - if you have more than one hard drive as second
USB third if an option and if it is available also set - check other boot devices.
 

2 more replies
Relevance 78.31%

I tried to boot my PC with a floppy boot disk and all I get is the report that there is a "Disk error I/O". My system is a GigabyteGA-7ZX, AMD 850 Duron, 256 Mb SDRam. I have the latest BIOS ver fg. Can anyone help please? I have tried different Floopy drive/cable and also different Boot disks.

Answer:Boot "Disk error I/O" - Press any key to continue.

Can you try another FDD

8 more replies
Relevance 78.31%

HELLO EVERYONE...

well 3 days ago i was playing a game on my pc and then i shut down my pc sucessfully. When next day i turned it on I couldnt see anything on my screen.
The monitor LED was blipping and blipping and i couldnt see anything on my monitor.
then i checked all the connections everything was fine den i switched my display from graphic card one to default monitor and the display came back but what i see is

"SYSTEM BOOT FAIL" press F1 to continue.
the system ran smoothly but i couldnt use my graphic card display because it shows no display..
I TRIED THE FOLLOWING THINGS

1. UPDATED MY BIOS
2. CHANGED THE MOTHERBOARD CELL.
3. CLEANED MY CPU THOROUGHLY EACH AND EVERY PART.
but nothing seems to work
now everytime i run my pc it takes atleast 10 seconds more than usual to start up and every time it shows me system boot failure press f1 to continue.
I checked other threads also but couldnt find my solution...
please help!!!

Answer:SYSTEM BOOT FAIL PRESS f1 to continue

Hello, see if you can do this : Advanced Boot Options

57 more replies
Relevance 76.67%

Hi, bought a laptop a few months back, was really slow by the 2nd or 3rd month but didn't make much of it. However when I was forced to restart my laptop for an update on monday, it showed this error message.'The selected boot deice failed. Press <Enter> to Continue' After pressing enter, the laptop shuts down adn this problem repeats itself. Anybody can help?  

More replies
Relevance 76.67%

So i had a disc error and had to switch out my hard drive. After doing so, i was prompted by some hp recovery and fixing tool that fussed around a while and tolled me that it couldnt fix the system and some logs were stored. After this i tried to install win 8.1 by running it from a usb storage device that had the windows 8.1 setup software in it. Then the screen went black and i was promtped with "The selected boot device failed. press Enter to continue"  Any ideas on how to fix this?













Solved!

View Solution.

Answer:The selected boot device failed. Press enter to continue

Problemi1 wrote:And now we get back to the original problem. I have an official version of windows 8.1 downloaded and formated to an 8 gb usb stick by the official program from the official microsoft websites. And just to clarify, this works with my pc. Now when i try to start the installation in the HP computer, it promots me with "the selected boot device failed. Press enter to continue" and im given option to "boot manager", "boot manager"(yep 2 times) and "boot from EFI file" which faces the same issue when i try to manually boot the device.Hi, Sorry to hear that. If you see boot manager and boot from EFI file but nothing else, the USB thumb drive is not detected. Please, perform the steps above- ensure the Win 8.1 USB stick is intact and working- disable Secure Boot and enable Legacy mode- save the changes and proceed with F9 mode.   If it still doesn't work, please take screenshots and attach them in the next post.Hope this helps.

10 more replies
Relevance 76.67%

So i had a disc error and had to switch out my hard drive. After doing so, i was prompted by some hp recovery and fixing tool that fussed around a while and tolled me that it couldnt fix the system and some logs were stored. After this i tried to install win 8.1 by running it from a usb storage device that had the windows 8.1 setup software in it. Then the screen went black and i was promtped with "The selected boot device failed. press Enter to continue"  Any ideas on how to fix this?

Answer:The selected boot device failed. Press enter to continue

Hello, Thank you for posting in the HP Support forum. I'd like to help you solve your issue but I need some clarifications: So i had a disc error and had to switch out my hard drive So, you had faulty HDD (disk) - what you mean you switched it - 1) you did install a brand new HDD - empty oneor2) you you took the HDD from another PC and placed it in this machine ? What you describe above sound like second scenario... but I need clarification.  In all cases, it's best to use HP Recovery media to restore the computer to factory default condition. Looking forward to your confirmation and I will provide you with next steps.

4 more replies
Relevance 76.67%

When I go to turn my computer on there's a black screen with a blue notification box that says"The selected boot device failed.press enter to continue"

Answer:The selected boot device failed.press enter to continue

Hello @Prburt0809 Welcome to the HP Support forum. The issue appears most likely due to incorrect BIOS settings re. Secure Boot and Legacy Mode.    Please, perform some basic hardware checks 1. Please, shutdown the computer using the power button2. Power it on.2.1 As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap).This should open a HP Startup Menu which may look similar to this one 3. Choose F2 to open System Diagnostics. Follow the on-screen instructions to perform System Test >> Quick test.This will check major hardware componets for issue (do it just in case) . Here is more info >> http://support.hp.com/us-en/document/c03467259#AbT1 If there are no system checks/no quick tests, perform HDD and RAM check. Let me know the test results.   4. Repeat steps 1-2 above but when HP Startup menu opens, please choose F10 for BIOS setup options.Navigate the BIOS and find the option to reset to default/load default settings. Do so and eventually exit the BIOS exiting the settings. This should enable Secure Boot and disable Legacy mode settings. Hope this helps. Let me know how it goes. 

1 more replies
Relevance 76.67%

Hi all,My tablet now can't be booted up after installed HP's lt1420 drivers What should I do now? Thanks

More replies
Relevance 75.03%

This is what happened it is a Dell Dimension 4600 with window XP Home SP2

Was trying to help a lady get her printer going, it kept saying it was open when it wasn;t but that isn't the problem now this is

There was a plugin in the wall behind her printer, I asked her if that cord was her printer and she said yes, I unplugged it and the printer and her camera and computer all went dead, it wasn't her printer cord it was the cord to the surge protector she had and it was all plugged into that. So I thought ok no problem.I plugged it back in and went to start the computer and it was dead, I mean dead didn't even try to start. I checked all the cables and surge protector etc and plugged the computer in an outlet by itself and it would not start. I said it is probably your power supply. I had another power supply at home so I went and got it and plugged into the motherboard and the other wire to the mother board and one wire to the harddrive. I plugged in the new power supply and the computer took right off. So I told her she would have to get another power supply, however with the new powersupply when the computer came on it came on to a black screen with white letters and said something to the effect of

Error No Boot Device press F1 to continue, or F2 to run setup utility if you press F1 to continue it just keeps going back to the same page saying no boot device it you press F2 it takes you into the BIOs.

I didnt think to much of it at first I figured when she ... Read more

Answer:Solved: Windows xpSP2-no boot device press F1 to continue but just goes back to same page- I

8 more replies
Relevance 75.03%

Whenever Windows Server 2003 is shutdown by accident due to power failure I get a screen at boot up that asks to press the ESC key to continue. Why? and is there a reason for this.
Thanks
 

More replies
Relevance 72.57%

I have the exact same problem. It seems to be a virus. when you boot up in safe mode and it asks you if you want to install the software to fix the problem this "Hard Drive" utility comes up and scans your hard drive and reports a bunch of problems but then wants you to purchase the program before it will fix them. My problem is that I cant get out of the fake safe mode to run my antivirus software. Anybody out there have a solution?
 

Answer:Virus windows Boot failure Press ok to fix boot failure

Hi and welcome to TSG

i have moved your post - its difficult having multiple questions in a post to keep tract

Update the post with further details - windows version etc

also have a read here http://forums.techguy.org/virus-other-malware-removal/943214-everyone-must-read-before-posting.html and follow instructions
 

2 more replies
Relevance 70.11%

I just downloaded Windows XP(Service pack 3) and mounted it to a USB disc.

Problem is, it doesnt work. On the boot screen it gives me the message invalid system disk. replace disk and press any key to continue and then when i press any key, it boots into my hard drive/Windows 8.

Originally i thought something was wrong with the boot but now i think it may or may not be. All help is highly appreciated.

Answer:Unable to boot, invalid system disk. replace disk and press any key to continue

Few, if any, downloadable copies of WinXP are legal. The 'Invalid System Disk' error message is the tip off.

You'll need to buy a copy from an authorized source. There is no way to trick the system into recognizing an illegal copy of Windows.

7 more replies
Relevance 69.7%

I tried formatting my hard drive using the provided software from the company I bought the computer from, but it did not install correctly. Now there is no Windows or any files of Windows showing up on my hard drive whatsoever.

Whenever I pop in the Windows CD to try and repair or re-install, I get an error that states "Disk Boot Sector is to be modified! Press Y to continue, any key to abort" and once I do, it seems like the Windows options are about to come up, but then it just shuts down my computer. Any thoughts or possible fixes? I'm not sure of the correct location for this thread so I put it here. Thanks in advance!

Answer:ERROR: "Disk Boot Sector is to be modified! Press Y to continue" then crash?

I'd try a bootable hard drive diagnostic that's available from the support website of the manufacturer of your hard drive. That'll let you know if the hard drive is failing and we can move on from there.

2 more replies
Relevance 69.29%

New to this forum, sadly my laptop won't boot....I'm hoping I can get some insight here.
I get the black screen with the following messages:
"PXE-E61: Media test failure, check cable
PXE-M0F: Exiting Intel Boot Agent.
No boot device found. Press any key to reboot the machine."

I can get into BIOS and run diagnostics followed by the prompt: "Success, all tests pass.".....but system won't boot.
I searched and searched the internet and tried various things but no change.
I removed and reinstalled the hard drive twice, no change.
I made sure the HDD is first to boot order in BIOS...no change.
If anyone can point me in the right direction I would certainly appreciate it.
Thank you in advance.

see pix:

http://i.imgur.com/d6kQG29.jpg

Answer:Dell Latitude E6520 won't boot.....PXE-E61: Media test failure, check cable and PXE-M0F: Exiting Intel Boot Agent. No boot device found. Press any key to reboot the machine.

Press F12 at powerup - boot to the Dell diagnostics and run an extended test on the hard drive - this will take a couple of hours (not just the 10 min or so the quick test did).  It'll likely show a bad drive.

2 more replies
Relevance 65.6%

This black screen appeared after starting up my pc. I ran my windows repair cd and 'no hard disk' appeared. I checked in my bios and my HD is not showing up. I have checked and reseated the cables with no success. I also extracted my Hd and hooked it up to a USB adapter and it did not show up at all. I hear power to the HD but can't seem to get to the data. I have a years worth of photos on there and need to get it working again. Any suggestions?
 

Answer:Boot disk failure, please insert disc and press enter

It is a Compaq presario, amd athlon 64, witha a seagate barracuda 7200.9 120 gb HD.
 

2 more replies
Relevance 65.6%

Satellite A65 just had the dc power jack replaced.
Unable to access bios, esc and f1 key have no effect. Battery is fully charged. Removed hd and ram, no change.
Help!

Answer:Satellite A65: error message "resume failure press any key" and no boot

Hi,

Sorry, but what has the DC jack with the startup of your machine to do? I really not understand. Could you please explain it a little bit better?

Usually the "resume failure" error should be solved by removing the battery and the AC-adapter for a longer time (about 1 hour) then put everything back and startup the machine. Don?t forget to put the HDD and the RAM into it when starting up. ;)

Greets

2 more replies
Relevance 65.6%

So I just built my new PC and I get to this:

Boot from CD:

NVIDIA Boot Agent 246.0540
PXE-E61: Media Test Failure, check cable
PXE-MOF: Exiting Nvidia Boot Agent

Then it does it again then

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER.

I tried putting in my motherboard driver but it did nothing. I'm wondering if it means operating system, I tried putting this XP Recovery disc thing I had from my old PC but it wont do anything, do I actually have to go and buy another XP? That would be a huge pain, I've already spent thousands on this thing

Thank you all!
 

Answer:Boot Failure, Insert System Disk and Press Enter.

6 more replies
Relevance 65.6%

I have a small annoying problem. Everytime I boot up my computer I get the splash screen then it tells me to press F1 to continue. This is a recent occurence I have not made any changes to my computer and I have checked the BIOS and it is set to boot from the HDD first. Whilst it does not in any way affect the running of the computer it is annoying. Can anyone help?

Thanks.

shipboard.

Answer:Press F1 to continue

Usually when I see this, it's the BIOS with some minor error, like it can't see a hard drive when the setting says there's supposed to be one. I'm surprised it doesn't spell it out.

You might have lost some hardware, like your optical drive. Start pulling stuff off the motherboard and see if the error goes away. Also disable everything you don't need in BIOS. It's a good idea to do that anyways.

4 more replies
Relevance 65.6%

On one of our old windows 3.11 packard bell computers that is used for a phone system, when you turn the computer on, you get a message that says
--------------------------
reference id 20

invalid configuration info- please run setup program. press the f1 key to continue f2 to run setup utility
-------------------------------------
I thought maybe it was the floppy controller so i disabled that but that did not do anything.

Answer:press f1 to continue

run a check disk make sure the drive isnt bad.

4 more replies
Relevance 65.6%

Hi,At start up pc is asking me to press F1 to continue,when pressed pc will start normally,why im having this,can i do something to let pc start without this ?
thanks

Answer:Press F1 to continue

I could be a setting in your bois.
We need this first so we know what we are working with.
Please update your system specs.
In the lower left of your post tick on (My System Specs)
This is also helpful.
System Info - See Your System Specs

7 more replies
Relevance 65.6%

hiAs I aware you that i am facing problem, when start my computer it is saying cmos checked default load error press f1 to continue. help me what i have to make setting to correction this error message.thanksjiffry

Answer:press f1 to continue

You might have a bad cmos battery. Just went through this with my old 98 machine.

3 more replies
Relevance 65.6%

I have fixed a friends Dell Optiplex 745 computer. All is working well except it will not boot directly to windows, I get the "press f-1 to continue then it boots up. When I go to the bios, it looks different than any bios screen I have seen.  I don't know how to fix things there, there are not a lot of options..

Answer:press F-1 to continue

In the BIOS you could select "restore defaults" and that may get normal operation back. Does the "F-1" warning contain any information as to what is prompting it such as a fan failure,etc.? truenorth

2 more replies
Relevance 65.6%

Just replace hard and I have to press F1 to finish start up.

Bob
 

Answer:Press F1 to continue

Replace hard drive and loaded Win7 and now I have to press the "F1" key to finish the the booting process.

Sorry for the the 1st post.

Bob
 

2 more replies
Relevance 65.6%

Hello,

I wud like to skip the subject prompt at bootup. I'm running DELL Dimension 3000, Win XP Home.
Have 2 hard drives plus DVD.

What wud the proper jumper and BIOS setup be to accomplish the above?

Present setup:
WD077 (has the OS) master and is on the proper cable connector.
WDxx -2nd master
DVD - 1st slave

Boot sequence:
DVD
WD077

Thanks,

Sam
 

Answer:Press F1 To Continue. . .

11 more replies
Relevance 65.6%

at startup ,get blue screen then black screen press f2 to continue. computer did not always do this.

Answer:how to press f2 to continue

Put the exact blue screen error message into google.Or, use this.WhoCrashedhttp://www.softpedia.com/get/System...http://www.softpedia.com/progScreen...http://www.resplendence.com/mainpress f2http://is.gd/pZAMh6

2 more replies
Relevance 65.6%

...maybe not.I'm trying to flash my mobo BIOS so that I can upgrade my processor. I've got an MSI, so I use their 'Live Update' facility to get the precise BIOS revision identified and downloaded. I then make a diskette as per the instructions and boot-up using that. When the final warning comes up about the dangers of flashing your BIOS unless you 'really know what you are doing' (I like that bit, real confidence booster), it prompts "press any key to continue" with the flashing procedure. My PC hangs at that point (or maybe just dosn't detect any key being pressed). End of my attempts to upgrade the processor for the time being.Same thing happened to me when I installed a new Maxtor hard drive: made a CD using their utility for Set Up and Partitioning, but the process kept hanging this side of the POST.Any ideas why I keep running into these brick walls with the keyboard?

Answer:'Press any key to continue...'

Do you have a USB keyboard? If so, that is likely the problem.

3 more replies
Relevance 65.6%

i just done a fresh install of a new hard drive in my sons comp, it was working fine untill he got to ( adjusting ) resolution; ie; and whatever else...now when you turn comp on it starts boot sequence then stops at press f1 to continue or delete to enter setup... if you press f1 it goes to windows, and works fine... i need help to get it to go strait to windows without the f1 to startup...any help greatly appreciated..
 

Answer:press f1 to continue ???

8 more replies
Relevance 65.6%

Does anyone know how to program something like this:

cout << "Hello, World!" << endl;
cout << "\nPress any key to continue...";

I don't know how to make the program pause then continue by pressing any key. Can anyone help?

Thanks,

Nic
 

Answer:Press any key to continue...

I don't know how to do it in C/C++, but in QBASIC you make a loop which goes around until a key is pressed. So somthing like this:


Code:

PRINT "Press any key..."
DO WHILE $INKEY = ""
LOOP
PRINT "Continuing"

Using the same principle you could probably do the same in whatever language you're using.
 

6 more replies
Relevance 65.6%

I have got a new PC
when ever i start the PC it says press f1.
i have to press f1 inorder to get to the windows.
Please Guide Me
 

Answer:Press F1 To Continue

Is that all it says? Just press f1?

Please post the whole message, because what comes before press f1 is the problem you have.
 

3 more replies
Relevance 65.6%

HP laptop, when i turn it on i get this

SMART Failure Predicted in Hard Drive 0:xxxxxxxxxxxxxx

WARNING: Immediately back-up your data and replace your Hard Drive Disk. A failure may be imminent.

Press F1 to continue.

i press f1 and it does nothing....wont even boot to a boot disk or os disk. any suggestions other than get a new hd??
 

Answer:Press F1 to continue

12 more replies
Relevance 65.6%

when pc start at that time it ask press F1 to continue and delete to enter cmos setup.

Answer:Press F1 to continue

Any other errors its giving? how old is your PC?

2 more replies
Relevance 64.78%

Hi all,

I am new here and I am having issues with my desktop computer. It is a compaq. not sure what it all has but it is a basic computer nothing fancy. It was working great a couple hours ago. I then decided to move it. So I unplugged it moved it plugged it back in just like I had before but now it is saying Disk boot failure insert system disc and press enter. The only problem is I do not have a system disc for it. I really hope this can be fixed. I was hoping to use this computer for a craft computer.

My main computer is my laptop. Thank god I have 2 computers.
 

Answer:Disk boot failure insert system disc and press enter

12 more replies
Relevance 64.78%

Hi, I was building my first machine today, everything seem to go smooth except when I went for the final run/test. It boots the Logo and starts going through a ...scan, of some sort detecting devicers and whatnot. And prompts me with "HARD DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER"
Now the only problem i had building this thing was the directions on the hard disk-to mobo directions. Its a WD 160g Sata2, theres no ribbon cable slots on the back of the drive, so i figured the red SATA cable that came with the mobo was for the different type of Drive instead. It was connected from there to the mobo, and itself to the power supply from 2 wires. And this is where im lost as to how to fix the prob.

Restated Q. How Do I Get Rid of "HARD DISK BOOT FAILURE INSERT SYSTEM DISK PRESS ENTER." Error. / What should i be connecting on this Hard Drive of mine.
 

Answer:HDisk Boot Failure Insert Disk And Press Enter Problem!

Getting The Boot.........

WD Sata (retail boxed) drives come with a proprietary cable. it has a wide end at the drive and must be used with a 4 pin "legacy" connector for power. This is the same power cable you would use for a standard IDE drive. Using a standard SATA cable it should just connect to the board (at SATA 0, for 1 drive) with no other cable used. That is what you're calling a flat cable.
It won't boot from the hard drive because there's no OS present. The BIOS must be set to boot from the CD (or DVD) drive first which should have the Windows CD inserted when you power up. Some boards will run Sata as IDE automatically and some boards require you to install a SATA driver before they'll recognize the drive. If you're running XP and don't intend installing RAID drivers, you must run the drive as IDE. Usually, this is in BIOS under drive configuration. What you're calling a "ribbon cable" is an IDE only connector. A ribbon cable (40 or 80 pin) has no use whatsoever in a SATA installation!
 

12 more replies
Relevance 64.78%

My CPU fan is acting funny., BIOS shows that it runs between 90-250rpm and 150rpm on an average,. I've removed it, cleaned all the dust and replaced and it worked fine at 1500rpm for about say 15mins., I started a game for stress test and problem resurfaced in the middle of game. Video card is problem free absolutely. I get this "CPU fan error Press F1 to resume" everytime i boot up. CPU is overheating (temperatures raising upto 85 degrees). I use a 4pin connector for cpu fan port on the board. (Q-fan is disabled in BIOS, turning it ON also dint help me).

PC Specs
Asus M2N MX SE PLUS
AMD Athlon X2 64 4600+
Transcend 2GB DDR2
ATI Radeon HD 4670 512MB
Cooler Master 390W PSU
Seagate 250GB SATA HDD
BIOS AMI v602

Games are lagging as soon as the CPU temperature hits 59C. Fan speed gets low starting at this point. Once this temperature reaches 69C, rpm falls down to as low as 200 from usual 1500. I checked all the connections, everything is fine. This board is replacement one i got last yr from asus service center. So its around 1-2yrs old. This is not the usual false warning which can be turned off in BIOS. I've checked fan speed myself and its rotating/stopping/rotating/stopping for temperatures >59C and once CPU cools down to some 58C rpm is back at 1500. I dint get a reply from asus tech support yet. I did try resetting the BIOS but that dint help

If someone completely understood where the problem lies, please do help me

Thanks
 

Answer:CPU fan error! Press F1 to continue

Your fan speed should be over 2000rpm and you cpu around 40c.
I suggest getting a new heatsink the old one maybe failing.
Make sure you use the correct amount of thermal paste when reinstalling.
http://www.arcticsilver.com/instructions.htm
 

2 more replies
Relevance 64.78%

Hi,

This weekend I was on a website and IE suddenly went blank and a windows dialog box will pop up with "You must press yes to continue". I pressed yes once and I was asked to download a file whose name I failed to write down (like an idiot) but I wrote down the website address: 209.190.5.106. I clicked cancel, closed Internet Explorer and did "all the right things". I ran AVGFree. It found 8 infected files. 7 were "Java/ByteVerify" and the other was "Trojandownloader.Generic.SSX". AVG was unable to clean or remove because the files were "Archived". I looked at the location of the files and all were in the Temporary Internet Files, so I ran "Disk Cleaner", then explored and wiped out what disk cleaner missed.

I ran AVG again and I was clear. I thought I was good. Then yesterday, the same thing happened. I did NOT click yes. I closed IE, ran AVG (10 files this time). Then, because AVG doesn't have a very good virus descriptions page, I looked "ByteVerify" up on Symantec's website. And what Symantec described for this virus sounds nothing like what I am experiencing. Just as a precaution, I downloaded all the critical updates for my computer (only 2 I didn't already have). I deleted ALL the temp folders, ran MSConfig to check my start-up files, etc. When I re-ran AVG again I was all clear.

Except that today it happened again. I didn't get the "You must press Yes to cont... Read more

Answer:"you Must Press Yes To Continue" While Browsing

Hi, Forgot to include my "Hijack This Log"Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\WINDOWS\SYSTEM\KB891711\KB891711.EXEC:\WINDOWS\SYSTEM\KB918547\KB918547.EXEC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\TASKMON.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\PROGRAM FILES\GRISOFT\AVG FREE\AVGCC.EXEC:\PROGRAM FILES\GRISOFT\AVG FREE\AVGEMC.EXEC:\PROGRAM FILES\GRISOFT\AVG FREE\AVGAMSVR.EXEC:\WINDOWS\SYSTEM\MSTASK.EXEC:\WINDOWS\SYSTEM\WMIEXE.EXEC:\WINDOWS\SYSTEM\DDHELP.EXEC:\PROGRAM FILES\HIJACKTHIS\HIJACKTHIS.EXER1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://red.clientapps.yahoo.com/customize/...rch/search.htmlR0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = http://red.clientapps.yahoo.com/customize/...rch/search.htmlR1 - HKCU\Software\Microsoft\Internet Explorer\SearchURL,(Default) = http://red.clientapps.yahoo.com/customize/...//www.yahoo.comO2 - BHO: AcroIEHlprObj Class - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\PROGRAM FILES\AD... Read more

10 more replies
Relevance 64.78%

I was defragmenting my drive with Perfect Disk 8 when I got a blue screen. I followed some Microsoft troubleshooting tips, and it told me to run the disk error checking utitlity on My Computer>C:\ Drive (right click)/Properties/Tools/Error checking. So I did an error check. The problem was that it got stuck at 46% at Step 4/5. I restarted my computer and when it said 'Press any key to stop error checking' I pressed any key, but it didn't stop error checking. I tried this about 10 times. Same result. Then I entered BIOS Setup utility and selected 'Load Optimal Defaults' and saved changes and restarted. Then, I got an error that said NTLDR is missing please restart. So I found a solution on this site, which told me to use the XP bootable disk. When it says 'Press any key to boot disk' I press any key, and guess what? Nothing happens! It loads Windows XP bootscreen then, it goes to the disk checking which I scheduled (which I still freezes at 46% and can't be aborted)I have tried 3 different keyboards. Please help!System Specs... Microsoft XP Home EditionMotherboard: AsrockThat's about all I know, since I can't load Windows on that computer.

Answer:'Press any key to continue' not working

The important detail, which is missing, is what happened prior to this. See below.

14 more replies
Relevance 64.78%

During my usual morning start-up, I got a dos screen with a message and to press F1 to continue. Everything booted fine after that. I ran malwarebytes, backed up my data files on a flash drive and looked into the event logs to see what might have happened. Unfortunately, I didn't even know where to look in the event logs except the administrative events which showed nothing critical.
I wish I had paid more attention to the original dos screen message. I'm now afraid to shut this puter down and wondering what happened. Appreciate any input........
Ann

Answer:Bad startup Press F1 to continue

Dude I get this on every boot
It could be something like. No optical drive. Or new drive.

1 more replies
Relevance 64.78%

Hello,

I built my latest computer about a month ago and it has run great. However, each time I have to start the computer up either from rebooting or because I shut it down hours before, it always asks me to "press any key to continue ..."

Here is what is on the screen:

ODD0: ATAPI iHAS424Y
ODD1: ATAPI iHDS1185

Press any key to continue ...

*******
If I do not press any key withing 5 seconds, then it gets stuck on that screen and message. When it gets stuck, I have to hard shut down and restart my computer. I have built 7 computers since I started building them and this has never been an issue. I am sure there is a fix but I have searched and not found one.

Thank you.

I am running Windows 7 Ultimate
 

Answer:-Press to continue- on startup

11 more replies
Relevance 64.78%

Hi, does anybody know if i can change the text that the "pause" command shows?


Code:
C:\>pause
Press any key to continue . . .
to something like


Code:
C:\>pause <something>
Press any key to exit . . .
- Hakon

Answer:C:\>pause Press any key to continue . . .

In DOS, you could edit the io.sys file to change the string. If you know how to do that, we can talk.

9 more replies
Relevance 64.78%

Hello , Am having a problem and i have searched alot about this but i didn't find any thing that can help me ..  So what i did and how i got this message ?* i want to formant my pc so i put the windows 7 CD in then i completed first step which is copying folders and stuff then it comleted 100 % and it restarted automatichly after restarting the pc it stucks on blue screen with a message " press esc to continue" i have tried to press every thing nothing worked for me ,,  WHAT THINGS YOU TRIED TO SOLVE IT ? * i tried to remove all plugs inside the case like wires from HDD and mother board every thing = still not solved *i tried to go to BIOS recovery mode tried to press F10 and more but it stucks on blue screen with that message = Nothing happend * tried to press POWER ON + WINDOWS KEY + B = nothing heppend * tried to press POWER on then i kept pressing on ESC = went to a black screen and it has a kind of details like prosssor name chanel 1 2 3 and l1 l2 l3 NOTHING WORKS FOR ME   PLEASE HELP ME  i will be thankfull if u helped me in this problem  

More replies
Relevance 64.78%

Hi,

I hope I am in the correct category for these two questions. When I start my computer I have to hit F1 in order to contine. Once I am signed in I have a message telling me to alter the date and time, which has set itself at 31 Secember 1999. I duly obey and new date and time is showing in bottom right. However, I have to do this every time I start up my computer. Does any kind soul have a remedy for this little tinker please?

Cheers, BoltonByrd

Answer:Having To Press F1 To Continue & The Clock

Hi .This is very common, if not recognized by users the first time it happens. The remedy is cheap and readily attainable by all .CMOS Battery. - http://www.geocities.com/micksmix2000/cmosbatt.html CMOS Battery Replacement - http://www.liverepair.com/encyclopedia/art...cmosreplace.asp Louis

8 more replies
Relevance 64.78%

Running on a PC now getting this Message 3rd master bad . I believe this means the HD is failing BUT which HD I have 2 the main is partioned to C and G and D is another one .Evrything seems to be working normally. Not too technical please
Thanks

More replies
Relevance 64.78%

Hello , Am having a problem and i have searched alot about this but i didn't find any thing that can help me ..  So what i did and how i got this message ?* i want to formant my pc so i put the windows 7 CD in then i completed first step which is copying folders and stuff then it comleted 100 % and it restarted automatichly after restarting the pc it stucks on blue screen with a message " press esc to continue" i have tried to press every thing nothing worked for me ,,  WHAT THINGS YOU TRIED TO SOLVE IT ? * i tried to remove all plugs inside the case like wires from HDD and mother board every thing = still not solved *i tried to go to BIOS recovery mode tried to press F10 and more but it stucks on blue screen with that message = Nothing happend * tried to press POWER ON + WINDOWS KEY + B = nothing heppend * tried to press POWER on then i kept pressing on ESC = went to a black screen and it has a kind of details like prosssor name chanel 1 2 3 and l1 l2 l3 NOTHING WORKS FOR ME   PLEASE HELP ME  i will be thankfull if u helped me in this problem  

More replies
Relevance 63.96%

hello recently (for the last several months) whenever i boot up my computer i get the message press f1 to continue here is the full reading

bios: Phoenix ROM Bios Plus version 1.10 A06
system: Dell System Precision work station 530 MT

Primary hard drisk drive 0 not found
primary hard disk drive 1 not found
(keyboard error) <-- lol no keyboard inserted atm because its in storage i'll grab one later)
Hardrive: seagate ST336752LW

i have no idea what my mobo is i couldn't find anything i do belive it is the default one D:
(all my drives are scsi)

the thing is after i press f1 it works just fine can play on it with no issues. But it is annoying to press f1 every time anyone know why this happens? i have windows xp (not any help though )
and btw how can i press f1 if there is no keyboard
 

Answer:Solved: Press f1 to continue on bios

8 more replies
Relevance 63.96%

I was looking at a system not all that long ago that everytime it started up on the second screen of the BIOS it would say something like:

Both Mac Addresses on the APC & DMI are incorrect. Press F1 to continue (not sure if that is correct)

the board is a brand new Asrock G-Pro mainboard, anyone got any suggestions? - Should I try flashing the BIOS?
 

Answer:Asrock BIOS -> Press F1 To Continue

12 more replies
Relevance 63.96%

Occasionally when a key is pressed; it will act as if it is being held down: however the keys are not stuck. I have tried updating the drivers, but it didn't work. This is not the biggest issue, since it only happens less than a dozen times a day.

More replies
Relevance 63.96%

I have seen the above in various posts, here and else where and have thought this must be some obtuse joke , which I did not get the handle on. Then to-day P.O.S.T halted at an early stage,and there it was 'Unlock keyboard press F1 to continue'and of course pressing F1 did nothing because........ A Re boot did the same. We went to do the weekly shop Came home had a refreshing cuppa booted up and all was normal So what was that all about?

Answer:unlock keyboard press F1 to continue

Either the lead for the Keyboard wasn't fitted properly, or there just wasn't any/enough power to "see" the keyboard correctly.I agree, it IS stupid... My old system's keyboard was broken and it said press "F1" to continue... What good would that do if the keyboard has died?Anyway, I hope I have answered your question

7 more replies
Relevance 63.14%

Hi All,  Have had my Helix for just two days and this morning I got a 'Keyboard Dock Fan error'.  I have updated all software including BIOS updates, so before I return my laptop to the reseller, my question is, is there anything I can do since I assume this is a hardware fault ?













Solved!

Go to Solution.

Answer:Keyboard Dock Fan Error Press Esc to continue

Hi,
 
Welcome to Lenovo Community Forums!
 
Please refer this knowledgebase and try to do the firmware upgrade as suggested.
 
Hope this helps!
 
Best regards,
Mithun.





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Relevance 63.14%

I made a bootable usb then after that, i tried to install windows 7 ultimate x64 in my other laptop that cannot boot to know if i can fix it with reinstalling, when i booted to my USB, it said




Quote:
Press any key to boot from the USB


so i pressed any key but it just put me back to the manufacturer logo over and over again. So i tried to format the USB then i made it a bootable USB again then another problem appeared,




Quote:
BOOTMGR is Missing
Press CTRL+ALT+DEL to Restart


SO i did reformatted the USB again and made it a bootable one then it showed the




Quote:
Press any key to boot from the USB


that when i press a key,it will just put me back to the manufacturer logo and will just loop forever. Any help guys???

More replies
Relevance 63.14%

my Helix machine stops working because of fan and dock error. i did whatever said in comunity, link in belw:https://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/Helix-keyboard-stopped-working-or-fan-...i am very frustrated and would like to sort this out soon, as i need this laptop for next week journeyplease help me to sort it out asap thanksAkbar













Solved!

Go to Solution.

Answer:Keyboard Dock Fan Error Press Esc to continue

well, it is sorted by this instruction:  Prior to the firmware update release, a temporary remedy was to reset the keyboard dock using a paper clip to press the reset switch found on the rear of the dock. ThanksAkbar

1 more replies
Relevance 63.14%

Even though my dell inspiron 3542 laptop which has 8.1 installed in it is fully charged,it is showing "low battery press F1 to continue" every time i start my laptop. please suggest what should i do to stop this unwanted notification at startup. 

Answer:at startup itz showing battery low press F1 to continue

en.community.dell.com/.../19631703

1 more replies
Relevance 62.73%

I need some help. I just finished building this machine and I'm getting this error each time I start up. Let me give you my current config:

ASUS P5K-E WiFi-AP
160GB ATA/100 Maxtor (OS is loaded on this drive WinXP Home SP2)
160GB S-ATA WD
DVD-RW S-ATA Pioneer
CDRW IDE
1GB DDR2 533 x2

Preface:

This MBO has 6 S-ATA connectors on it for setting up a RAID0, 1, 5, or 10. The MBO manual states; "when using the connectors in standard IDE mode, connect the primary (boot) hard disk drive to the SATA 1/2/5 Connector. Refer to the table below for the recommended SATA hard disk drive connections."

The table reads as follows; Connector SATA1/2/5/6, color; Red, Setting; Master, Use; Boot Disk. Connector; SATA3/4, color; Black, Setting; Slave, Use; data disk

My Setup:

I currently have the BIOS set so the SATA connectors are in IDE mode. (I tried to set them in SATA mode under this config and that started a whole other set of issues. I put it back to IDE)

The two SATA devices I'm using are connected to SATA3/4. I connected this way because my thought is that neither one of these drives are the Boot drive and if your not a boot drive your a slave. (this could be where the issue is)

The following 2 drives are connected via the IDE connector on the MBO.

The 160GB ATA/100 Maxtor has the OS loaded on it and the jumper is set to Master. It is connnected to the primary/black IDE connector. In the BIOS I have this drive set as number 2 in the boot priority.

The IDE CDR... Read more

Answer:Start Up Error: No Master IDE H.D.D. Found! Press F1 To Continue

7 more replies
Relevance 62.73%

I have a X240 that is giving me 2012: Detection error on SSD2 (M.2). Press ESC to continue. Only thing it DOESN'T have a M2 installed in it. Is there something in the BIOS i can do? The BIOS is also up to date so thats out of the question, also its up to date on any other Lenovo update and windows updates.

More replies
Relevance 62.73%

Help! I have several months of work on a zip drive that I obviously did not copy properly. I need to recover the data on the stick and do not have access to my hard work on any computer anymore.

I hope someone can help me!

Thank you!

Please see screen shot of files on flash drive. All open with the exception of the one named SEGARI'S which is where my files are saved. Notice the size.....it seems something is in the folder?
 

Answer:Please insert the last disk of the Multi-Volume set and press ok to continue

9 more replies
Relevance 62.73%

everytime i turn off my comp and turn it back on it stops loading up and says A: drive error, press F1 to continue, and then it proceeds to the windows xp load scren... why does it keep tellin me i have a A:drive error?
 

Answer:restart comp and it says A:driver error press F1 to continue

This is happening on your Vista Upgrade?
 

4 more replies
Relevance 62.73%

Hello All,

Since today, whenever i boot up my system. This message "AA number not programmed on this computer.. Press enter to continue" shows up while boot up every time. when i press enter windows loads fine. the first time this occurred. the Realtek audio drivers were missing and it got it automatically from the windows update. later on every time when i boot up the error message still remains. but no other drivers were re installed or updated like the first time. I would like to get rid of this message. Please help..Thanks in Advance.

(Not sure where to post this, thats why posted here)

Answer:AA number not programmed on this computer.. Press enter to continue

I would like to help but I have no idea what a AA numbers is.

9 more replies
Relevance 62.73%

Hi, i had my PC running XP fine, no problems that im aware of. i partitioned the hdd and installed Windows 7 x64 on second partition and now every now and then the PC reboots and displays the error;

4th master hard disk error, press f1 to continue

any help would be great, let me know if anymore info is needed.

Thanks,

D.

Answer:4th master hard disk error, press f1 to continue

That is a BIOS error, check your PSU.

8 more replies
Relevance 62.73%

Intel DG965WH
intel dual core 2.1 ghtz
ddr 5 video card
2 hd's 40gb and 500gb

win7 ultimate


After the bios screen I get the following message:

Problem with hard drive, press enter to continue

I press enter and windows boots and both hard drives work flawlessly. If I disconnect the 5oogb the error no longer appears and if I try disconnecting the 40gb hd and boot the 500gb by itself the error re-appears, so I think we can safely say the problem lies with the 500gb hd...

But the hd works fine. I have tested it with the seagate tool and after a long scan the drive passes. This also happens with the western digital diagnosis tool, again using the long scan. However, the SMART status states that the hd has failed??

This is my stepsons PC and he says he has had this message since he installed the 500gb hd and he chose to ignore it. This message he has been getting for about 15 months!

At first I thought it might have been a psu problem as he only had a 250w psu and a 20 pin connector going to the mobo. But I have replaced the psu with a 400 watt and I still get the message:

Problem with hard drive, press enter to continue

Now I'm stuck - the HD passes these tests should he just run the hd till it dies? Is there anything wrong with it (how can I be sure?)

Your help is much needed here - i've ran out of ideas

thanks in advance!
 

Answer:Problem with hard drive, press enter to continue - plz help!!

1: Typically, this is a drive failing error. Back up your data.

2: Another possible, but possibly too late solution would be to reboot, tap f8 as it starts and choose "last known good configuration".

3: Finally, you can use System Restore and restore the PC back to before this error started.

If the last 2 steps fail, see step 1. Buy another drive that's the same and migrate to the new drive and get ahead of it.
 

2 more replies
Relevance 62.32%

um I just built a pc 4 my friend and i need help...uh i got through boot and then i gotta error message sayin DISK BOOT FAILURE, INSERT SYSTEM DISK AND CONTINUE. i hav an xp disk and i put it in and it still showed error and then i put in my mobo driver disk and it still showed same thing. I n33d help uh plz give aall the advice u can. thx

p.s. it dont hav an fdd
 

Answer:DISK BOOT FAILURE, INSERT SYSTEM DISK AND CONTINUE...help

Is the hard disk completely formatted?

Check your XP cd and see if it is scratched.
 

9 more replies
Relevance 61.91%

Whenever i boots my Dell Optiplex 3010 desktop,  it stuck at press F1 to continue press F2 to setup.......
Power button Cable failure alert is ther, but my power button is almost working fine......

More replies
Relevance 61.91%

Hi All,

I have been given a 3TB Seagate HDD as the original owner believed it to be faulty. So I thought I would take a look after installing it I get this error on boot up.

'Sata Port 2 Device Error, Press F1 to continue'

After continuing to windows its not visible in disk management.

It is visible in the bios menu though.

Any ideas? Is it a throw away?

Cheers Brizee

Answer:HDD - Sata Port 2 Device Error, Press F1 to continue on start up??

I would run a few disk checks on it - starting with chkdsk in cmd. Or the Seatools: SeaTools | Seagate

3 more replies
Relevance 61.91%

Hello, Just got a new Lenovo Helix on Friday. Last night after starting the maching I received this error: Keyboard Dock Fan Error Press Esc to continue I updated the Helix BIOS version as per this post: http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/Helix-keyboard-stopped-working-or-fan-e... The problem is that I cannot implement this firmware update: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035554 Without getting this message: This tool and EC firmware mismatch, or communications error is happened. I have tried the re-set button and it doesn't do anything. They keyboard dock is dead for all intents and purposes. No  power no nothing. The tablet portion seems to be working fine but no input from the keyboard at all. No little red light   on the "Thinkpad" logo. Zip. Zilch. Nada. Is the battery for the keyboard dead? I keep thinking that I get the second error message because the tablet cannot connect to the keyboard becasue there is no power. I've called Lenovo help but I'm at work and they took too long to even get to the problem...I had to get back to work. They just recommended performing a system update. Did I just get a dud keyboard?  I didn't want to have to go to the trouble of returning this as I had it set up exactly how I wanted it (software, etc.) and I ordered it online. Can anybody help with this?   

Answer:Keyboard Dock Fan Error Press Esc to continue-LENOVO HELIX

Did  you manage to fix this? I have exactly the same problem.

9 more replies
Relevance 61.5%

I'm trying to install W2K on a pc that had Windows ME previously. I managed to get rid of ME but cannot install any os now. I boot from the dvd rom when trying to install and it starts, but when I get to the screen that says Press F6 for 3rd party....or raid...something (sorry can't remember) it then goes to a message that says Line 7243 of the INF file is invalid. Set up cannot continue. Press any key to exit, whether I press F6 or not.

This pc has an Asus P3B-F motherboard, Slot 1, HD Quantum AT-Fireball AS, ATI Rage 128 Graphics card, 3 Ram cards 128M, PC133 and PC100 (came with the pc that way) and DVD-ROM Lite-on IT Corp- model ltd-122.

I thought I might need a driver for the motherboard as my other Asus motherboard (different type) has a disk for Promise 100. So I downloaded a bios driver for the Asus P3B-F, but when I press F6 as instructed...I still get the "line7243 of the INF file is invalid....do I need some other driver? Hope someone can help. Thanks.
 

Answer:Line 7243 of the INF file is invalid. Setup cannot Continue. Press any key to exit.

10 more replies
Relevance 59.86%

Does "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" mean that there is no OS installed on the hard drive?

On my other computer it says "No Operating System found".

Thanks.
 

Answer:Solved: Disk boot failure, insert system disk and press enter

11 more replies
Relevance 59.86%

I have just put together an old computer which i had previously been using. It was taken apart, so i reassmbled with a new video card. When I start it and it goes to the second screen checking for IDE primary master etc. It just stops after having ...None after everything, and it just stays there. It doesn't respond to me pressing Delete to enter setup after that. I'm wondering if it could be mechanical or electrical, or both. Thanks
 

Answer:{RESOLVED}Disk boot failure, insert system disk and press enter

14 more replies
Relevance 59.86%

when starting my computer, and no boot disk is inserted, i get the error message:"HARD DISK BOOT FAILURE INSERT SYSTEM DISK PRESS ENTER" when a boot disk is inserted, windows xp starts up if no button is pressed after a boot disk is inserted. I cant work out how to boot from hard disk immediately, and it is set as primary boot device. ANY help would be greatly appreciated!!!
 

Answer:Hard Disk Boot Failure Insert System Disk Press Enter

Just go into the Bios and (For my motherbaord) in Advanced BIOS Features, set primary, seconday etc boot devices as you like.
 

14 more replies
Relevance 59.86%

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.

I have installed a new hard drive and used three different sata cables none of that worked. I have even taken out the battery and that did not work. I am about to give up and scape the whole thing.
 

Answer:Disk Boot Failure, Insert system Disk and press enter nothing seems to work

It sounds like a motherboard failure to me.
 

6 more replies
Relevance 59.86%

When I start my non-brand PC with an MSI mobo I receive the following message:
disk boot failure insert system disk and press enter

At first I thought it was the SATA hard drive but when hooked up to another machine I can see all the files. When I went into the Phoenix/Award Bios all the drives are IDE drives. Not an SATA drive option anywhere. The computer was working great for a number of years. I hooked a brand new SATA drive and the BIOS does not recognize the drive.

What might be the problem and how might I use my hard drive again? Thanks!
 

Answer:Solved: disk boot failure insert system disk and press enter

9 more replies
Relevance 59.86%

Hiya

Well, as some of you may jnow, this pc has caused me a lot of trouble. So, now its installed witha brand new Motherboard, RAM, AGP card, and hardDrive.

Installed Windows 2000 using the upgrade disk, popping in Win98 to confirm I had it. It all worked okay, but on a restart the error comes up:

Boot from CD: Disk Boot Failure, Insert System Disk and Press Enter

Now, in the BIOS, I've had the boot sequence as all sorts. First, was

CDROM, HDD-0, Floppy

No joy, so went to

HDD-0, CDRom, floppy

then

Floppy, HDD-0, CDROM

Then, for the sheer heck of it

HDD-0, HDD-1, Floppy

Still nothing.

I tried it with Quick Boot disabled, nothing. Seek Floppy is Enabled, was disabled by defalut. HDD S.M.A.R.T is enabled, was disabled by default.

As the pc at home is the only one there, I can only answer via the work's pc during the day. I have my motherboard booklet, and the BIOS is Phoenix AwardBIOS

Any help would be great, so close to marking the threads that I've started on this problem Solved

Thanks in advance

eddie
 

Answer:Solved: Disk Boot Failure, Insert System Disk and Press Enter

16 more replies
Relevance 59.86%

Help. I just built a new computer and I don't know what's going on. I keep getting the error: disk boot failure, insert system disk and press enter

Here's my scoop:
-All new parts: IBM 30GB 7200rpm, P3 800EB, Aopen AX3S pro,128mb ram, 52x standard cd, standard floppy.
-Boot sequence = a,c
-I am trying to use a win98 boot disk (tried 2)
-followed my motherboard's instructions exactly
-CMOS and POST detect everything successfully

Everything checks out. What else is there? Could it be that my hard disk is dead???? A brand new Disk????

Thank you,

Allen

[email protected]
-
 

Answer:{SOLVED}disk boot failure, insert system disk and press enter

14 more replies
Relevance 59.86%

Hi, I left my Pc on standby last night, there were no signs that the computer was broken in any way. I started it up by hitting one of the keyboard keys and it came up with a blue screen of death which I didn't take note of. After I restarted my pc and now it looks like it can't find the OS. I have tried to system restore but it won't let me. And I have also tried choosing a system image backup but it still won't let me. Any help will be highly appreciated.

Thanks,

Kyle

Answer:Disk boot failure on startup, insert system disk and press enter

Hello Kyle!

What kind of boot drive do you have? What model is it? Is there another storage device in your PC?

Start your PC up and check if you see the boot drive in BIOS. If not, power down the PC, open it up change the cables and port, start up again.

Good luck!

CK_WD

9 more replies
Relevance 59.86%

Sometimes, when I am on my computer it restarts and I get this message

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

If I turn my pc off and boot it back up, it works fine. I think the problem may be a virus, but using AVG free 8.0. I have found nothing (2 adware) which I think could cause the problem.

Currently I am running a Kaspersky Online scan. But does anyone know what my problem could be?

Answer:[SOLVED] Disk Boot Failure, Insert System Disk And Press Enter

Quote:





Originally Posted by Greerere


Sometimes, when I am on my computer it restarts and I get this message

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

If I turn my pc off and boot it back up, it works fine. I think the problem may be a virus, but using AVG free 8.0. I have found nothing (2 adware) which I think could cause the problem.

Currently I am running a Kaspersky Online scan. But does anyone know what my problem could be?




the big possiblity is ur hardisk is in trouble.
please use disk utility to check it like deleted reference to illegal software.

16 more replies
Relevance 59.86%

hi sir,im vijay..
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk ...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir...till now its showin the same error sir...

plz help me..im so confused..

Answer:hard disk boot failure insert system disk press enter

Repair MBR:

Boot From the Windows Install Disc
The first thing you?ll need to do is boot off the install disc, and then click through until you see the ?Repair your computer? link in the lower left-hand corner.
You?ll need to choose the correct installation of Windows and then click the Next button.
And then you?ll get to the System Recovery Options screen, where you can get to the Command Prompt.

Repairing the Master Boot Record:

If you want to restore the master boot record, you can simply type in the following command:

bootrec /fixmbr

You can also write a new boot sector onto the system partition with this command (which is often more useful):

bootrec /fixboot

And of course, if you just use bootrec /? you?ll be able to see all the options.

6 more replies
Relevance 59.86%

Hi i have a 74 Gb western digital hard drive with C: and D: drives (i partitioned them)
the D: drive has all my gaming applications on it and the C: drive has all the files for windows/and other crap like firefox, etc.

I was once reformatting to XP from Vista and in the middle of reformat my computer shut down causing a major problem. the answer was my graphics card died... now i have an EVGA 256Mb 8600GT with DX10. I brought the drive to my neighbors house and he can use it just fine, it boots and everything... but... the problem is that when i bring it to my house, and i insert the drive it goes to the Nvidia Boot Agent and after a while displays HARD DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER. My current BIOS Boot order is Floppy, CD, and then Hard Disk. I don't know why it wont boot, but the copy of XP has been verified and it works great on my friends computer... why won't it start on mine?
Please help me !
 

More replies
Relevance 59.86%

This is my first build and only problem im having right now is this disk boot failure error..I have a legal copy of vista and trying to install it on a SATA drive and using a DVD/RW to load the CD..I've checked all the connections and everything is seated correctly..went into the BIOS and set my DVD drive to primary and the SATA drive secondary and still no luck..Very frustrated and running out of ideas...Can someone help
 

More replies
Relevance 59.86%

Hello everyone,

We have tried many things to get our computer running, and no luck. We have an older Pentium II 400 MHz computer, and we installed a brand new 500 GB IDE hard drive ( which is recognized at start-up ) and we have Windows XP to install. The computer will not install Windows, and the boot disk the hard drive manufacturer provided will not boot the computer.

We have been working on it for three nights and nothing!

We set the boot in BIOS to boot from CD, and it will not boot with Windows XP, or the hard drive CD that came from Western Digital. We even reset the bios, and took out the battery for over 5 minutes and no luck ( except that it helped the computer to finally recognize the new hard drive - we only have one which is set as the Primary Master. We checked all the cables, and disconected the main cables from behind the hard drive, and the two CD roms and nothing!

Can anyone please help us?
 

Answer:Disk Boot Failure, Insert System Disk and Press Enter - Tried many tips and nothing!

16 more replies
Relevance 59.86%

Hi, I've recently tried to install a new HDD (WD Black 1 TB) and a new vid card ATI Radeon HD 3850. When I try to boot and install XP I'm getting the msg Disk Boot Failure, insert system disk and press enter.

Before I was getting "PXE-E53: No Boot Filename Received." However I went into BIOS and disabled the OnChip LAN Controller and I'm now getting "Disk Boot failure, insert system disk and press enter."

When I check in BIOS it seems the HD and my CD Rom are both being detected (They both come up). My initial feeling is that my CDRom is failing, but could it also be that I've gotten a dead HD? If anyone can help me with the Disk Boot Failure problem I'd greatly appreciate it. Thanks.
 

Answer:Solved: Disk Boot Failure, Insert system disk and press enter

6 more replies
Relevance 59.86%

Hi i have a self built pentium 4 pc that wont boot.
When i turn it on there is a very long wait at the HP Invent screen (it is a ms 6577 ver 2.1 board) and when it finally gets to the black screen with the slashing dash in the top left hand corner it just flashes for around a minute before saying "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"
I have managed to get it to boot once by going into the recovery tool on the XP disk and using "FIXBOOT" but that only worked once and it wont work any more. The specs of the pc are,

PENTIUM 4 1.8GHZ 478
MS 6577 VER 2.1 BOARD
256 MB RAM
20 GB WESTERN DIGITAL HARD DRIVE.

There is nothing to lose on this PC. Thanks in advance. Alex
 

Answer:Solved: Disk Boot Failure. Insert System Disk And Press Enter

16 more replies
Relevance 59.45%

i am a begginer in the terms of my computer literacy and i need some serious help. When i start my compaq desk top computer, the message disk boot failure, insert system disk and press enter pops up after about one min. of a black screen and blinking cursor. I have already checked to make sure that every thing is hooked up correctly and that there is no external devvice or cd in or attached to the system. I pressed the F8 key to try and make sure the system line up was correct, but the screen does not change when i press it. I also do not have a recovery disk as far as i know..Can anyone help me?
 

Answer:disk boot failure: insert system disk and press enter

7 more replies