Computer Support Forum

Create HP Recovery Partition

Question: Create HP Recovery Partition

Hello All,
I have seen this thread: request: HP Recovery partition/dvd of Windows 7. I want to make a recovery partition on a clean install of windows 7. This is what I did:
1. Download HP Recovery Manager for Windows Vista
2. Install it.
3. Go to C:\Windows\SMINST\RAMDSK\Windows\SYSTEM32
4. Run Shrink.exe

Before when I ran it it said it couldn't create a recovery partition. To run it asks me to click next when it says "This installer will create a recovery partition and an initial restore point" and I did. But now when I run it as administrator it says its verifying the file system and it says it is preparing the harddrive for recovery partition creation and gives me an error : "Resizing of the windows partition failed or the disk is not recognized!The recovery partition cannot be created.you may try to delete files i the Windows partition, defragment the drive and/opr use a 3rd party tool to reduce the windows partition in size.". I tried everything.

On the screen it gives me the error it said it will restart the PC in a few seconds and it counts down and it shows click finish to restart. When I wait or click finish it just closes and does not restart my computer.

I reinstalled it lots of times.

In Shrink.exe.log it says this:

Code:
__________________________________________________________________________________________

Shrink.EXE - 4, 0, 2, 59 - Compiled on Feb 7 2007 14:08:38 - Executed on May 16 2012 19:26:18

UP is C:\
RP Extra size=0 MB
CGen::GetDirSize : ENTER CGen::GetDirSize(CString strDir=C:\WINDOWS\SMINST\RPFiles)
CGen::GetDirSize : RETURNED 0

Size of [C:\WINDOWS\SMINST\RPFiles]=0 (0 MB)
. - 0 (0 MB)
.. - 0 (0 MB)
install.wim - 2188587580 (2087 MB)
Size of [C:\System Recovery\PRELOAD]=2188587580 (2087 MB)
CDisk::CloseDiskInformation : ENTER CDisk::CloseDiskInformation()
CDisk::CloseDiskInformation : EXIT

GetRPSize=3971166780 (3787 MB)
RP Size : 3787
UP locked
001-Estimated RP size=-1 MB
CDisk::CloseDiskInformation : ENTER CDisk::CloseDiskInformation()
CDisk::CloseDiskInformation : EXIT


-> 16/05/2012 - 19:26:30
Also I have a 32-bit computer.
Any help will be appreciated.
Bye.
Jacob.

Relevance 100%
Preferred Solution: Create HP Recovery Partition

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: Create HP Recovery Partition

Why do you want a Recovery partition on the same HD, which can fail and lose the ability to recover.

A much better plan is to save a Win7 backup image externally so you can reimage with the Win7 boot CD/DVD in 20 minutes to the same or a replacement HD.

I would also consider with HP getting a far superior Clean Reinstall - Factory OEM Windows 7

1 more replies
Relevance 69.29%

I am working on my sisters Toshiba L655d-S5055 notebook. windows 7, 3gb, amd v120 processor, 250gb drive. Started with error msg at boot "encountered a problem communicating with a device at startup......". Couldn't get by this error. took out drive, inserted into usb-enclosure, and tested. numerous sector errors. She has also lost the recovery disks I made for her. I used partition software to scan just the recovery partition, and there are no errors reported there. What I would like to do, is to copy to a flash drive, or make new recovery dvd's from this recovery partition; then I can use the coa from the back of the notebook (if necessary) for full install onto a new hard drive. However, I can't use the toshiba notebook for this; I can only use my desktop pc for the xfer; using the toshiba hard drive as a usb external drive, and the toshiba media creator software will not install onto my desktop pc (doesn't give me a reason). I would prefer to go the dvd-route, but flash drive would be ok, too. Any info is appreciated. thanks.
 

Answer:how to create recovery dvd's from recovery partition mounted as usb-external drive

9 more replies
Relevance 69.29%

Hello, I don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact. Thank you for your time. Regards













Solved!

Go to Solution.

Answer:Create Recovery Media/Do Factory Resect without Recovery Partition

To reset your PCSwipe in from the right edge of the screen, tap Settings, then tap Change PC settings.(If you're using a mouse, point to the top-right corner of the screen, move the mouse pointer down, click Settings, then click Change PC settings.)Tap or click Update and recovery, then tap or click Recovery.Under Remove everything and reinstall Windows, tap or click Get started.Follow the instructions on the screen.NoteYou'll be asked to choose whether you want to erase data quickly or thoroughly. If you choose to erase data quickly, some data might be recoverable using special software. If you choose to erase data thoroughly, this will take longer but it makes recovering data less likely.
 
 
Refreshing your PC without affecting your files

If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC without deleting any of your personal files or changing your settings.

Note
If you upgraded your PC from Windows 8 to Windows 8.1 and your PC has a Windows 8 recovery partition, refreshing your PC will restore Windows 8. You?ll need to upgrade to Windows 8.1 after the refresh has finished.


Warning
Applications you?ve installed from websites and DVDs will be removed. Applications that came with your PC and apps you've installed from the Windows Store will be reinstalled. Windows puts a list of removed applications on your desktop after refreshing your PC.


To refresh your PC

Swip... Read more

2 more replies
Relevance 69.29%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

More replies
Relevance 69.29%

When I push the Q: recovery drive> Create recovery media, I get a message saying "Windows cannot find 'C:\Program Files (x86)\Lenovo\factory recovery\recovburncd.exe'. Make sure you types the name correctly, and then try again."How do I go about fixing this and creating a recovery disk?

More replies
Relevance 69.29%

Hello!I just bought a Lenovo IdeaPad with a windows 7 32 bit version. There was no system disk added. I learned that the windows 7 version is hidden in a recovery partition. I now want to create a system disk to save the windows 7 32 bit version just in case and install a windows 7 ultimate 64 bit version on the computer. Can you tell me what I have to do? Thank you!

Answer:How to create a recovery system disk from the hidden recovery partition?

Hi and welcome,
One way is to save a recover set ... with OKR ... or better do this Backup before  ...but no way to get a  pure Windows 7 Install Disc if you mention this  ...  
 
And Windows 7 64 Bit will not run on Atom based machine.. i.e. S10/S10e/S10-2 ,S12 Intel/Nvidia ...
(and even when, it lacks of memory 2GB (due the intel chipset restrictions) is good for 32 Bit based systems, but not really enough for 64 Bit based systems, so there is no benefit for use a 64bit on a netbook)  
S10-3t W7 64 ?
 
sincerely KalvinKlein 
-------------------------------------------------- -------------------------------------------------- --
Want more ? For further information to get the most of your S-Class machine 
Lenovo Energymanagement Backup  Windows 7 Driver Windows 7  Install
XP Startup  Small WebCam Guide  Lenovo Easy Capture    Clean XP Install
Resolution > 1024 x 576 / 600  Works with XP Only Try this for a Windows 7 Solution 

1 more replies
Relevance 69.29%

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/

I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data

after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows

IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it


Many thanks for your time...

Answer:Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

After changing HDD partitions structure it happens that ?Toshiba recovery media creator? cannot find recovery files. These files are marked with special markers that in your case cannot be found anymore.

I?m afraid now is too late to do or change anything. You are not the first one with this problem. We always write here that first step should be recovery media creation and later you can do whatever you want. You can even delete it.

Now you can just order new recovery disc at https://backupmedia.toshiba.eu/landing.aspx

2 more replies
Relevance 68.88%

Hi, I am trying to create a recovery drive on a new ThinkPad Yoga 15, but that is failing because the recovery partition seems to be empty. - Computer Management > Storage > Disk Management shows 3 hidden partitions. All three are 100% free (empty). - Control Panel > Recovery > Create a Recovery Drive throws error "We can't create a recovery drive on this PC. Some required files are missing. [...] use your Windows installation disc or media." - The laptop shipped without any installation disc or media. - Running >reagentc.exe /info throws "Operation failed: 3. An error has occured". - Running >sfc /scannow results in "Windows Resource Protection did not find any integrity violations". Where are the recovery files, and how can I create a recovery drive on this system? Thanks.

Answer:Recovery Partition Empty & Can't Create Recovery Drive

The better part of a month later and still no reply from Lenovo Support? I would appreciate a response. I paid a lot of money for a device that does not work as advertised. Thanks.

2 more replies
Relevance 68.88%

Hello all, I'm new here. I bought a Lenovo G50-70 at the end of 2014. I want to create a recovery media of my RECOVERY PARTITION. Ok I have Lenovo OneKey Recovery App v8 but with that application I can't create a recovery media of my recovery partition, I can ONLY create a recovery of my current partition (in this case: C: ). I don't want that my current partition has 119 GB. My recovery partition has 15GB, my question is: How can I access there to record it in a USB, DVD or my PC? Thanks in advance.

Answer:Lenovo G50-70 create a recovery media (of recovery partition)

macrium reflect





find joy.

7 more replies
Relevance 68.88%

Dear All. My T440s no longer has the recovery partition.I'm with Win 8.1 Pro, but I would like to restore the system. How can I do to restore and create a new Recovery Partition? Thanks,Lucas Mendes  

More replies
Relevance 67.65%

Well I finished my project - the program script allows me to create MBR and GPT hard drive partitions with a recovery image partition. The script also allows me to install 3 different versions of windows. and lastly it allows me to capture a recovery (push button reset) image. which can then be used to create recovery media..


Here is the Menu Snippet:
(A) CREATE A "BIOS_MBR TYPE" PARTITION STRUCTURE
(B) CREATE A "UEFI_GPT TYPE" PARTITION STRUCTURE
(C) CAPTURE AND CREATE A "BIOS_MBR TYPE" RECOVERY
(D) CAPTURE AND CREATE A "UEFI TYPE" RECOVERY
(I) INSTALL MICROSOFT WINDOWS FROM THIS USB DRIVE
(X) QUIT THIS PROGRAM

WinPE 5.1 was the preinstallation environment use for testing

Answer:Create a Recovery Partition and Recovery Image

Good one! I always have to go back and look up the procedure and commands when doing this. Really a help for an old brain.

3 more replies
Relevance 66.42%

I want to create a recovery partition on my windows xp desktop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 4 seconds . I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image. Im guessing id use ghost to make the backup. But if someone could help me.... I'll appreciate it. Thanks

Please mail me on [email protected]
Scorpionking

Answer:How to create recovery partition?

There are a couple of items you would have to do. First create a new partition, format it with FAT32 and make it bootable using DOS or The version that comes with Ghost. Create your image using Ghost or Acronis and save it there. You will have to install the imaging program on the partition as well put it in a folder called Ghost. Then you will need to create an AUTOEXEC.BAT file to load Ghost on start up saved in the same folder. I would make the parition bigger this way you can keep a few different images stored if you want. Finally you will need to alter you Boot.ini file. Create a copy and save it somewhere easy to remember first in case you make a mistake and need to restore the old one.

The boot.ini should look like this:

[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(2)\Ghost="Recovery Partition"

You can change how long the wait in seconds is by altering the timeout value.

1 more replies
Relevance 66.42%

I am attempting to create a recovery partition. The instructions I have received to create the partition state to type fdisk from command prompt then choose option 1. However, when I type fdisk I receive the message it is not a recognized command. Any ideas? I got this from this site http://www.ehow.com/how_4841312_recovery-partition.htmlThis is another computer i have, here is it's spec's HP 864n Windows Xp Pro Sp3 Pentium 4 2.66ghz 1024 RAM

Answer:How to create a recovery partition

Why not, after installing, updating, etc. to where you want to create a recovery partition, why not just clone the HD? That way, if the original HD goes, you just pop in the 2nd one and you're back up and running. Just a thought.

10 more replies
Relevance 66.42%

please how can i create recovery partition again ??  

More replies
Relevance 66.42%

hi, Folks

i run windows 7 and wanna make a recovery partition hitting the F key on startup like toshiba's one. The toshiba recovery utility is no longer available. Who can help me to do it?

Thanks in advance

Answer:How to create a recovery partition?

Hello

1.) On Toshiba notebooks there is no recovery partition. They only have an image of factory settings stored on second partition in HDDrecovery folder. This recovery procedure can be started in advanced boot menu of Windows (F8) and if you select ?Repair my Computer?.

2.) It?s not possible to create such a partition and then you have to press only one single key to start this. I think it?s pretty complicated to create such a recovery partition.

3.) You can create your own image using a backup program like Acronis TrueImage. Save this backup on the second partition or external HDD. You can restore this image using the Acronis boot disk. It?s very easy and I do this on my notebook too.

7 more replies
Relevance 66.42%

As I posted under different thread, my Windows 8 computer crashed a week ago.
A Dell technician replaced a new motherboard. Then, Windows 8 was restored using a provided Windows 8 recovery media DVD. Now, windows 8 runs super.

What I now found was that the original recovery partitions were disappeared. in the main hard drive.
I could not create a recovery drive (in flash drive) without recovery partitions in hard drive.
Is there a way to re-create the original recovery partitions ? If so, how?

Answer:How to create recovery partition

Buy the factory recovery disks.

9 more replies
Relevance 66.42%

Thank you for reading! Skip to the bold part below if this is TLDR. I've tried searching around for answers, but I'm afraid that I'm just not familiar enough with what I'm hoping to solve to even know if I'm searching in the right place. So again, thanks for your help in advance!

I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.

Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.

Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
... Read more

Answer:How do I create a recovery partition on a 2nd HDD

You can always create a System Image Backup on a second internal drive, as long as it is not part of the backup. You could also copy the current WindowsImageBackup folder to the internal drive for re-imaging the SSD.

The term "Image" may apply to many different type of files. For instance, a Windows 8 OEM system image may be a .wim file used to reset the system to factory conditions. The type of file would certainly determine what utility was necessary to recover that image.

A recovery drive will normally have the Factory image of Windows 8, unless you have replaced the install.wim with a new one. But all this does get confusing if the exact type of image being referred to is not known.

Be aware, when you create a Recovery Drive, the entire drive can be used for nothing else. That is why Flash drives are normally used.

9 more replies
Relevance 66.42%

make recovery patition

Answer:how to create a recovery partition

type backup in the run box, open backup and restore center, and create an image, preferably on an external drive.i hate computers!but cant help myself....

2 more replies
Relevance 66.42%

my sony vaio laptop model is VPCEH26EN.I recently installed windows 8 pro 64 Bit.I formatted whole hard disk and installed windows 8.I had a oem recovery partition when i bought this laptop with windows 7 preinstalled.By this hard disk partition ,i used to recover the whole windows to its factory condition by using F10 key.The recovery hard-disk partition was of only 11Gb.it contains the whole windows with some software already installed .But now i have no recovery partition now.So please tell how to create recovery partition with in 12GB for future purpose.The windows default system image creation usually taking 40 gb space.So its of no use.Please tell how to create a recovery partition which can be used to recover windows to its factory condition using F10 key in case of any error in future?????????????????

Answer:create recovery partition

You would like to remake the Sony Vaio VPCEH26EN Windows 7 Recovery Partition with Windows 8?

You can remake the Sony Vaio VPCEH26EN Windows 7 Recovery Partition with the Recovery DVD's.

For Windows 7.

How to make Sony Recovery Disks:
View Document
How to use Sony Recovery:
View Document

How to use Sony Hardware Diagostics:
View Document

How to order Sony Recovery disks:

1.Go to http://servicesales.sel.sony.com.
2.Enter your computer's model number (for example, PCV-XXXX), and click List Parts and accessories.
3.Follow the online instructions to order the Recovery Media Kit.
If you are not able to access the Sony Direct Accessories and Parts Center Web site, contact a customer service representative at 1-800-488-7669.

4 more replies
Relevance 66.42%

I have a Flex 14 Ideapad having 25 GB of solid state disc as a different partition. Now I am thinking of creating a system recovery disc in this drive. However I do not see any option of choosing this drive in the dialogue for creating the receovery disc.Could you please guide me as to how to create the recovery disc / partition for Flex 14 laptop on another drive on the computer itself.Thank you in advance

Answer:Create a Recovery Partition

You have a number of misunderstandings going on here. Firstly, all Win8.1 installations have a hidden recovery partition on the boot drive. You need a separate recovery disk/usb stick in case you get to the point where you cannot boot from the main drive. Best approach is to make a recovery disk/stick and choose to copy the recovery partition too, but do not delete it from your PC when it offers.The recovery drive will be bootable (that's the point) so if you managed to get it on an internal partition you would have to make a dual boot configuration. This would be an odd way of doing things and against design. I recommend against such a strange approach.

5 more replies
Relevance 66.42%

I have a computer with the F10 option when I first turn on the computer. The hard drive failed so I have replaced it and installed windows 7. I am wondering if I can create a recovery partition when I turn on the computer and use the F10 option to restore back to when I first installed windows 7?

Answer:Create F10 Recovery Partition

I don't think you can create a partition that will do that by pressing f10, but you can create a system image of your system that is activated and will restore your PC to exactly the way it is when you create the image. You can burn it to DVD, a separate partition or a USB stick. This would be my suggestion to you. Get your computer exactly the way you want it with all your basic and primary apps installed and everything activated. Then make a system recovery image and a recovery disk. To do this go to Control Panel>System and Recovery>Backup and Restore and look on the left hand side of the Windows and you will see both options. Click create a system image and tell Windows where to save your image and it will make an exact copy of your partition. Then it will ask you to make a recovery disk. Follow the instructions on doing that and you will have a backup of your system at it's bare minimum.

9 more replies
Relevance 66.42%

By mistake my little brother have formated the recovery partition.I am not able to refresh the PC through update&recovery option in PC settings...I have HP pavilion 15 notebook.windows 8.1 single language. Please guide me create the partition again.......











Solved!
View Solution.

Answer:How to create recovery partition??????

Hello, Thank you for posting in the HP Support forum. Welcome! I am afraid you cannot create recovery partitions if they are deleted. End users cannot do it. If the computer originally came with Windows preinstalled by HP (e.g. OEM Windows), then you can purchase recovery media from HP. They are usually cheap. You can use it to restore your computer to factory default condition. Here is how to do it:>> http://support.hp.com/us-en/document/bph07143>> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html And once you receive the recovery media [DVDs or USB pen drive], here is how to use it to restore back to factory/Windows default condition:>> http://support.hp.com/us-en/document/c03489643>> https://www.youtube.com/watch?v=PC3sUc3lr3E  If the computer originally did not come with Windows preinstalled, but you installed it on your own after that, then you need to use Windows installation media to reinstall Windows. You can get Windows installation ISO images from Microsoft web site and then burn it on a DVD >> https://www.microsoft.com/en-us/software-download/windows8>> http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/  Please, let me know if this helps and works for you. Don't hesitate to post back for follow-up questions.

8 more replies
Relevance 66.42%

hello

How could i create a recovery partition, so that i could reinstall windows xp?
And if anyone can give me extra info that would be real helpful.
thx in advance.
 

Answer:how to create a recovery partition?

It's a bad idea to make one. You have limited access to the partition, and it is useless if the drive fails. Just use your original CD or make an image of the drive on an external.
 

1 more replies
Relevance 66.42%

Can anyone advise me how to create a recovery partition like those new HP computer? Thanks.

Answer:Create Recovery Partition

I found an article from PC MagazineMake a Recovery PartitionHope this is of some help

1 more replies
Relevance 66.42%

i have a year old hp pavilion a6425n and it shipped with a 250 gb hdd witch i later upgraded to a 500 gb hdd and i lost my recovery option.. can i make a new recovery partition using my win7 disk so if i press F11 during boot it takes me to setup?

Answer:how do i create a 'recovery' partition?

Hello cammy,

Here is a tutorial that may apply to you from this very website, try it out: Recovery Partition - Create

Credits:
"Recovery Partition - Create" tutorial creator - severedsolo

8 more replies
Relevance 66.42%

Hi all,
I'v trying to create a recovery partition on my Windows 8.1 PC.
I followed the guide here: Restore Deleted Recovery Partition2
I've put install.wim onto my recovery drive (R:\WIN8\install.wim)
When using command prompt to point windows to the recovery drive using:
REAGENTC /SetOSImage /Path R:\Win8\install.wim /Index 1
I receive the message:
REAGENTC.EXE Operation Failed: 3
I've looked around for a solution and i can't find anything applicable.
Can anyone help?
Many thanks!
1]: [click here

Answer:Trying to create new recovery partition

I've put install.wim onto my recovery drive (R:\WIN8\install.wim)

you don't make a recovery drive - install.wim does that for you
Create a folder on our C drive - Win81-Recovery
copy install.wm into that folder
right-click the Windows Start screen button and select Command Prompt (Admin)
type in
REAGENTC /SetOSImage /Path C:\Win81-Recovery\INSTALL.WIM /Index 1
press enter
now type REAGENTC /Info press enter

you should get operation successful
that's it

10 more replies
Relevance 65.6%

My laptop came with windows 8.1 innitialy. I had upgraded my os to windows 10. Some days back I had to do " restore factory settings " on my pc due to some problems and my pc started with windows 8.1 again.  So, How should I creat recovery partition that would recover my pc back to windows 10 with out going back to windows 8.1. Plzz Help me ASAP.

More replies
Relevance 65.6%

I bought my z5070 with HDD in it now it is so slow, so i bought SSD, i want to create a recovery partition as the one that came with the basic HDD(the one that we use to restore from using OneKey Recovery), so how can i create it?? or at leat coping it. i tries with the acronis that came with the SSD but i always fail "not supported file system" or something llike that the acronis gives me

More replies
Relevance 65.6%

As with most new home computers these days, the manufacturer will include a bootable recovery partition on the hard drive instead of sending you a recovery CD.
I?m currently building a new system with windows 7, and after installing some of the most common applications I want to create a bootable recovery partition on the hard drive, as well as a bootable image on a CD.
The question is I?m not really sure how to do this?
I know of programs such as Norton ghost and Acronis, but I was looking for an easier solution, perhaps a free program?
Any help would be greatly appreciated.
Thanks,
Nick

Answer:How do I create a bootable recovery partition?

Hi -

The recovery partitions are found on pre-manufactured OEM systems. You can create a system inage on a partition, external drive, DVD, etc...

See "system image" - from Microsoft, Windows 7 Support -

http://windows.microsoft.com/en-us/w...a-system-image

http://windows.microsoft.com/en-us/w...ings-and-files

Regards. . .

jcgriff2

.

1 more replies
Relevance 65.6%

I want to create 2 partitions in my hdd but I have no idea how to do it. I have 80GB hard disk. I have recovery CD and I want to ask if anybody knows is this possible to do it by that recovery cd.

Thanks for any help!!!!!

Answer:How to create partition in Satellite 105 via recovery CD?

Hi nina,

Use the Expert Modus with the recovery CD.

You make a Partition with the recovery CD

- Choose ?Expert mode? pressing number two
- Click OK and press ENTER
- Choose LOCAL - DISK - FROM IMAGE
- Look in: must be selected to CD-ROM drive
In the middle window choose GHO file and press ENTER
- Using TAB button you must mark information about drive and so on and press ENTER
- Using TAB button mark again middle part of window (blue line) and with space bar activate ?New Size? box
- Put inside new partition size and press again ENTER button
- The question ?Proceed with disk load?? confirm with OK

or use the Partition Magic 8 this is a good and a simple Software for Partitions of the HDD.

I Hope this is a Help

By

2 more replies
Relevance 65.6%

I've successfully created a Windows 7 Recovery partition as follows in the past, but when I try this with the Windows 10 Installation DVD or flash it says permission denied:
Windows 10: Create a System Installation Partition to install Windows (Installation Partition, not image)

1.) Boot From the Windows 10 Installation USB Flash drive and choose cmd from troubleshoot.

2.) Create a 16GB partition at the beginning of the hard drive, then partition the rest of the hard drive as you wish as follows:

Diskpart

select disk # (note:where # is the number of the partition in the output of the list disk command.)

Create Primary Size=X (where X is in megabyte hint: 16 GB is exactly 16384MB)

3.) Copy the entire USB Flash drive on to the 16 GB partition and make the partition bootable.

Open the command prompt and type this:

diskpart (note if not already in it)

list disk (note: disk number next to disk)

list volume

select volume # (note:where # is the number of the partition in the output of the list volume command.)

list partition

select partition # (note:where # is the number of the partition in the output of the list partition command.)

delete partition # (note:where # is the number of the partition in the output of the list partition command.)

select partition # (where # is the partition you want to format on the disk note the number beside partition in the list partition output.)

create partition primary size=16384

Active

FixPar... Read more

More replies
Relevance 65.6%

Hi Guys,

So, I have a Toshiba Satelite L505-141 (from Greece) and my hard drive broke. Unfortunately, I have lost my recovery discs. I have changed my hard drive, I have installed the OS but I would like to have my computers as it was (with all crapwares ... Wink )

I found a guy with the same laptop and he can send the recovery disc. Actually, he already sent me the 2 disc (he sent me two copies of his CD online) that he created when he bought the laptop (through the Recovery media creator). Those discs though are not bootable and (I read) that you just use them and when you restart the system goes through the recovery wizard. Unfortunately, it didn't work for me (at least with the CD my friend sent me).

Do you know any way that I can do it? I mean to get from my friend a recovery disc? Can he create an ISO from his recovery partition?

Any suggestion is welcome!

Message was edited by: GeoKoro13

Answer:How to create bootable DVD/USB from Recovery Partition?

Hi

To be honest I don?t have experience with this stuff but i found very interesting document in Toshiba knowledge base - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

Check it out.

7 more replies
Relevance 65.6%

I'm using Windows Vista and I'm trying to achieve this...

1) Copy my C: Drive partition to a DVD
2) Have that DVD be bootable and be able to recover the entire partition back into the partition.

I've got my Hard Drive partitioned into 4 parts
C: - OS
D: - Documents, Program Files, AppData (and other windows folders)
the other two are not relevant.

So basically if anything goes wrong with my OS I want to be able to throw the DVD in and boot to it, have it restore the C: partition.

So what software would I use to do this?
 

Answer:Create a bootable Partition recovery DVD

Acronis True Image will let you "image" your entire drive or partition to CD/DVD media and restore it at a later time. The backup set itself will not be bootable, but True Image will create a bootable CD version of itself that you can use to run True Image natively (meaning you boot from that CD, load the application, remove that CD and then put in the backup CDs/DVDs and do the restoration, or use True Image to create new backup sets).

There's nothing on the market today that will automagically create a bootable backup recovery set; the only one product that ever did that automagically was Powerquest Drive Image. It would put the actual application on the first CD (it didn't burn DVDs when it came out and disappeared before DVD burners/media even became popular) and you could use that backup set to restore.

The only difference with True Image is you need the TI recovery CD + your backup set, hardly a big problem. You can burn off multiple copies of the recovery CD as required, one for each set if necessary.

Good luck...

ps
It's possible to create a recovery set using Norton Ghost and then you can create a new CD and put the ghost.exe executable on the CD, but you'd still be required to do other steps to make that CD bootable in the first place so you could then access the ghost.exe file to run it. A bit more hassle than most people care to bother with, I believe. But it's possible... and you can use other imaging tools to do similar tas... Read more

6 more replies
Relevance 65.6%

OK what I need to do is complicated. I have been searching for hours and cannot come up with a solution.
I have a computer with Windows 8 Pre-installed. It has a recover partition. I have disabled UEFI in the BIOS until I can finish installing Windows 7. I do not have any blank DVDs or access to a USB drive. What I want to do is delete the files in the Windows 8 recovery partition and put Windows 7 installer there. Then boot from that and replace Windows 8 with Windows 7. I have the drivers already downloaded to go onto the recovery partition. I have been unable to find any resources online to do this. I already Have a Windows 7 ISO ready to go.

Answer:How do I create Windows 7 Recovery Partition

How do I get over 100 views and no responses?

9 more replies
Relevance 65.6%

I would like to create a custom recovery partition for windows 8.1 that I can use to refresh the pc. I would like to include the drivers that are required. I am unable to locate a tutorial that can help me do this. Anyone know how I can do this?

Answer:Create custom recovery partition

Maybe this will help:
Refresh Windows 8 - Create and Use Custom Recovery Image

1 more replies
Relevance 65.6%

Hello,
Although this is my first post here, I am no stranger to this forum. So I have a blank hard drive which is for a notebook laptop with no DVD drive. I am planning to install windows 7 but I also do not have a 4GB () flash disk, at least not at the present.
So I though of creating a recovery partition. I am using windows 7 on my laptop and I have a SATA to USB cord. I have been creating partitions for some time now so I though it will be just the same process except that it is on another HD. Here is what I usually type on the console window.


Code:
diskpart
list disk
select disk X
list partition
select partition X
active
exit
X:\boot\bootsect.exe /nt60 X:
But when I was done with the process, transferred the HD to the notebook it did not boot into the set up process.
Although I don't know the problem, I suspect that the problem might be this last line :


Code:
X:\boot\bootsect.exe /nt60 X:
Please help if you can.

Thanks.

Answer:How to create a recovery partition for a blank HD

I think you are better off to make a USB recovery stick. Those sticks cost pennies.

Newegg.com - $0 - $10, usb stick

9 more replies
Relevance 65.6%

In a fit of over zealous tidying up after installing Win 10 on my lappie, I deleted the 450MB Recovery Partition that the upgrade from Windows 7 created at the end of the main partition.

1) What was actually in that partition and why would I want it.

2) If I do want it, how to re-create it ...?

Thanks
Dave

Answer:Re-Create that 450MB Recovery Partition?

Recovery partition is where Windows stores the WinRe.wim which allows you to create a recovery disk or get into the recovery environment to repair/Trouble shoot/Restore/Reset/Refresh etc...

Now that you've deleted it. Those features won't be available and you won't be able to create a USB Recovery disk.

9 more replies
Relevance 65.6%

As most of us know, Acronis True Image can create a recovery partition, that is available while starting up a pc / laptop with F11 key. While it sounds like i great idea, there is one issue with this. It's price for Acronis.


So i've been thinking as well with using a google to find a similar software, that can do same thing. But my google skills aren't as good as i would like it to be.

Here i'm asking for your help guys. If you have found one please let me know. So far i've found this one

create a bootable recovery partition to restore a pc. like oem's F11

ANARETHOS RECOVERY TOOLS with MEDIA CREATOR


but ... well just want to know is that everything ? Or there is other software that can help me creating recovery partition.


Yes i do understand i will need space from my Hdd. Not sure what else could possible go wrong


Cheers in advance for your help

szametu


Ps. Please excuse my bad grammar english. Still learning.

Answer:What software can create recovery partition ?

I would just create an image - beats reinstalling.

3 more replies
Relevance 65.19%

In the old windows 7 pro, the recovery partition is missed

More replies
Relevance 65.19%

Good Morning to All, I am using Windows 10 Single language Home edition on Intel i5-4210U CPU @1.70GHz, 2.40GHz, with 4GB RAM and 1TB hard disk. I deleted my recovery disk by mistake. Now I want to create 2 more partitions, one for data and other for REcovery disk. How do I Do it. Also I want to create recovery disk. How do I do it and what should be my partition sizes. Thanks

More replies
Relevance 65.19%

Hi,

I have a friends laptop (a Satellite Pro) which fails to boot into Vista (even in safe mode) with a blue screen. I have tried booting off my own Vista CD to attempt a windows repair, but even that results in the same blue screen. To cut a long story short, I want to resort back to factory default, but the recovery CDs were never created.

I can access the drive contents (both the C drive and the data partition) by booting off a linux live CD. Is there any way I can copy the files oft the data partition, and create a recovery CD/DVD using these file?

Many thanks

Answer:Can I create recovery CD from data partition manually?

> Is there any way I can copy the files oft the data partition, and create a recovery CD/DVD using these file?
No. You cannot do this. What you can do now is to order original recovery disc from Toshiba.
Sorry but there is nothing you can do about it.

2 more replies
Relevance 65.19%

Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?

I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...

would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...

Answer:create recovery partition with restore option with Fn key

Acronis True Image 2016 does this. You enable Startup Recovery Manager and you can hit F11 during the boot process to recover a disc image. Adds about 30 sec to boot process before it defaults to OS startup.

7 more replies
Relevance 65.19%

it says it all in the title really.

Can I create a restore cd from my HP partition using the Recovery Console? as I cant boot to desktop.

Chris
 

Answer:Can I create a restore cd from partition using Recovery Console?

8 more replies
Relevance 65.19%

Plz any one can help me.....
 
i have purchased laptop last week with following configurations:
Lenovo  G510 i5 2.5ghz with windows 8 and OneKey recovery feature.
 
 
My laptop was with windows 8 but i upgrade my hard drive 500 GB to 1 TB.
But now i am unable to recover my windows8 image by using OneKeyrecovery (novo).
So plz help me how to craete GPT partition style that will support for onekey recovery and recover Windows 8 image that is in my external hard drive.
Please send me the complete procedure to create GPT partition style supported for onekey recovery.Also solve the following questions plz.
1. How to create GPT partition style supported for onekey recovery?
2. Total Number of partitions and their actual sizes.
3. Size of C:
4. Size of D:
5. Size of recovery partition
6.Size of all partitions
 
Plz reply me at: ********@yahoo.com
 
 
Regards: Aamir
 
Moderator note: email address removed to keep away from the spambots.













Solved!

Go to Solution.

Answer:How to create GPT Partition for onekey recovery windows8

Dear Customer
 
Welcome in lenovo community
 
Please use the below link to download and install the Lenovo Recovery application so that you can do what you looking for 
 
Link : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035708
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

5 more replies
Relevance 65.19%

Hi, the hdd on my ThinkPad T410 is Out of Order ( dead -- too much sectors are defective ), i decided to install a new one in my notebook as it is no more under warranty, how can i create the partition recovery by myself (as all thinkpad have in their factory configuration) on this new hdd to permit me to restore my notebook if any issue further occurs ? Thanks 

Answer:HDD to replace in my T410, how to create a partition recovery in the new one

Hi HonoRob and welcome to the forum!
 
ThinkPads also have an option to create recovery discs:-
 
Windows 7: http://support.lenovo.com/en_US/detail.page?&LegacyDocID=MIGR-74040Windows Vista/XP: http://support.lenovo.com/en_US/detail.page?&LegacyDocID=MIGR-68317
 
Contact support to buy them if you didn't do so before your HDD went dead.Hope this helps.





------------------------------------------------------------Maliha (I don't work for lenovo)ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]IdeaPad: U350Apple:- Macbook Air [Snow Leopard]Did someone help you today? Compliment them with a Kudos!Was your question answered today? Mark it as an Accepted Solution!   Lenovo Deutsche Community     Lenovo Comunidad en Espaņol Visit my YouTube Channel

1 more replies
Relevance 65.19%

Yesterday i have upgraded my HP Envy 15-201TX Laptop from W8.1 to W10. As this is the genuine version of Windows which is only available for 1 Year so I wanted to have a Recovery Disk/Partition. So i deleted the old Recovery Partition(:D) which contained W8.1 given by HP and tried to create a Recovery Partition by myself using Windows Recovery Tool but i'm not able to do it, an error appears everytime i try do it "A Problem occurred while creating the Recovery Drive."
Steps are as follows: Control Panel > Recovery > Create a Recovery Drive
I have checked "Backup System Files to Recovery Drive".

More replies
Relevance 65.19%

Notice I said recovery partition on my hard drive-- not a recovery drive (e.g., on a USB flash drive)..
QUESTION:
If you upgraded to Windows 10 after your desktop arrived (with Win 8.1 factory installed), am I correct to assume the recovery partition you create after the Win 10 upgrade will unfortunately be for Windows 8.1? Ugh!!
The recovery partition I created is closer to 200 MB rather than a Windows 10 recovery partition which apparently consumes about 450 MB. (A Win 8.1 recovery partition is apparently about 200 MB.)
Your thoughts?
Footnote:
Assuming my conclusion is correct -- always a scary proposition at my age -- does anyone know of a recovery tool that will create either a Win 10 recovery partition or a Win 10 recovery USB flash drive from a desktop/laptop which has been u[graded to Windows 10 from the factory software install of Windows 8.1?
TIA
Michael T.
Software Engineer (retired)

Answer:Can I create a recovery partition for Windows 10 after I upgraded from Win 8.1?

When you upgrade Windows 8.1 to 10, Windows 10 will create a recovery partition if your system reserved partition (MBR disk) or Recovery Partition doesn't have enough disk space. As you know, Windows can only shrink a partition from the right side, so the 450 MB recovery partition is new created, which should not be deleted if you want to use recovery options. Windows 10 also allows you to create Windows 10 recovery disk use a USB drive. when you create a recovery usb disk, it will give you an option to delete the 450MB recovery partition.

1 more replies
Relevance 65.19%

I have been fixing PCs for friends and family for years, some of them are really good at screwing up an OS a only couple months after i install a fresh copy of xp or 7. i would like to be able to create a restore method simple for them to use to reset there machine back to my initial installed state. was thinking something similar to newer PCs F11 restore method or something i could add to a bootloader in 7 or xp making it a "dualboot" with just the OS and the recovery.

Answer:create a bootable recovery partition to restore a pc. like oem's F11

Since you'd be loading a backup image into a Primary partition created for this purpose, it can be reimaged using F8 System Recovery Options.

However this is not optimal because if you're making your own backup image then it can more easily be saved externally so it's also available in case of HD failure - or you can do both.

Backup Complete Computer - Create an Image Backup
System Image Recovery

2 more replies
Relevance 65.19%

Ok, here's what I want to do.

If I was to build a new pc from scratch and install windows 7 home premium, how would I go about creating a bootable hidden recovery partition on the hard drive, so I could reformat it back to these settings at any point if needed?

(like the proper manufacturers do themselves, normally loaded by pressing one of the F keys)

Thanks for your help.

Answer:Easiest way to create a hidden recovery partition?

Ah yes, my motherboard in particular lets you create one of those. Quite a useful feature, that I don't really use.

What you can do is store a partition containing a backup, and restore from that when the time is right, even though you will need a optical disk to begin the restore process using the backup program. You won't be able to get something like one of the F keys when your computer starts up like most manufacturers do, but you might be able to give it the option when choosing between boot choices when your computer starts.

How to create custom recovery partition - MSFN Forum


Quote:




You won't be able to get it to start by hitting F keys, but you can modify your boot loader to boot into a hidden recovery partition.

I've used grub for this in the past. Have a "System Recovery" option in the list and set the timer to 1 or 2 seconds. "System Recovery" boots into a scripted DOS or WINPE partition which has at least a couple of prompts to back out (incase you boot into it by accident) and eventually restores the system partition back to the original image.

I have used 3rd party tools to do the imaging myself, but you could easily use ImageX if using WinPE.

I've only used it for other people's computers, so I can easily instruct them on how to restore it back to a working image and saves me from having to look at the machine myself. Saves them playing around with boot options trying to boot from a CD/USB as well.



... Read more

2 more replies
Relevance 65.19%

Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?

I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...

would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...

Answer:create recovery partition with restore option with Fn key

Acronis True Image 2016 does this. You enable Startup Recovery Manager and you can hit F11 during the boot process to recover a disc image. Adds about 30 sec to boot process before it defaults to OS startup.

1 more replies
Relevance 65.19%

I finally broke down and bought a modern laptop Asus A55A (K55A) and installed Ubuntu 12.04 in a dual boot situation. With the nefarious secureboot and other such nonsense Windows 8 install met with an untimely demise. However, I have the files left on the recovery partition (copied to my 16gb usb) and need to make an install disk. My only issue is that I can't find a way to do it in Ubuntu as all the tutorials I find assume that Windows is installed. Is there a way to make a bootable Windows 8 install usb or iso from the files on the recovery partition-without using Windows to make it? I would love to re-install Windows 8 and then setup a stale dual boot.

Answer:Create Windows 8 USB from Recovery Partition files

Interesting, I have never tried that.

Can you post a screenie of the recov partition contents that you already copied to usb?

You might be able to make the stick bootable with grub.

5 more replies
Relevance 65.19%

Today I received 2nd hand X200 without any recovery disks. I reinstalled everything from scratch but I was just wondering is it possible to recreate hidden recovery partition for future recovery? It would be perfect if I would need to sell the laptop and make the customer happy. Anyone tried to do this?

More replies
Relevance 65.19%

how to create the recoverypatition at the on new installation of windows 7

Answer:How to create recovery partition on new Windows 7 installation?

Recovery Partition - Create

3 more replies
Relevance 64.37%

I was using win 8 which was original came with notebook , then I installed win8.1(not upgrade from Store , just from .iso packet ).Because of some errors I re-installed another win8 . iso and now I can't download Recovery from SW Update .It says recovery partition doesn't exist.I was able to use that before.How can I re-create my recovery partition again?

Answer:Win8 Hidden Recovery Partition deleted.How do I re-create?

Have you made the OEM manufacturer's Recovery Disks?

   Information

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD. (Windows 8 only)
Recovery Drive - Create with USB Flash Drive in Windows 8
System Repair Disc - Create in Windows 8 (Windows 8 only)




I would recommend you making the OEM manufacturer's Recovery DVD's or USB drive.
or
You can order the Microsoft official OEM Recovery disks from the OEM manufacturer's website.

7 more replies
Relevance 64.37%

HI,

MY LAPTOP IS SATELLITE L50C-14x.
It comes with windows 8.1.After start the laptop it says upgrade to windows 10. I Did it.
Now I want to create windows 10 recovery partition at my hard disk. It has a recovery partition of windows 8.1.

I want to delete it and create windows 10 recovery partition. What is the procedure ,will be to create recovery partition of windows 10 as like Toshiba create it.
thank you..!

More replies
Relevance 64.37%

Hi all I need some urgent help, hopefully i can get some advice.

I accidentally used the cmd prompt and clean and created partition primary wrongly on the wrong disk. Can i know is there any way to recover the data inside? please help... this is what i did below...
Please advise me how do i get back my data and also label it as d drive.

I have downloaded active file recovery and i am currently running super scan on it.



DISKPART> clean

DiskPart succeeded in cleaning the disk.

DISKPART> create partition primary

DiskPart succeeded in creating the specified partition.

DISKPART> exit
__________________

Answer:Help! Disk clean and create partition primary recovery

Hope that Jumanji can step in here and help you.

I would NOT try to recover the files as a first choice.

I would think in terms of recovering the partition--rather than the files.

The best single tool is probably Partition Wizard. It would try to recover the partition, and if successful, your files may be intact.

Don't do anything that writes to the disc.

2 more replies
Relevance 64.37%

Notebook Toshiba Satellite L850 - 19C (PSKDLE)


Hi, ich have new partioned my hard disk, befor this i have deleted all partions! :-)

I have installed the OS new, everything is ok and works well, i have loaded all needed drivers from the toshiba homepage......

I need a description how i create a new empty recovery partition, so that i can make a new backup with the recovery wizard!

Thank you.


Sven

Answer:Satellite L850-19C: Recovery partition deleted. How can i create a new one?

Unfortunately you cannot do it anymore. You must install original recovery image using recovery media and this recovery partition will be created automatically.
Have you created recovery DVD or recovery USB before you have changed partitions structure?

2 more replies
Relevance 64.37%

Hello. I'm new. I have an Asus Eee netbook which came with Windows 7 Starter and a recovery partition. However, I decided to sell it and wiped the drive with dban before selling. Unfortunately, I wiped everything, including the recovery partition! So I decided to sell it with Linux on, then decided to keep it after all (sorry - I'll get there eventually!) so sent of for Windows 7 Starter recovery discs from Asus, which I now have.

So - here's the point. When installing from the discs, it doesn't give me the option to create partitions or even a recovery partition. It gives me two options - install to primary drive (which seems to be the whole drive plus a 15mb partition) or to install to the whole drive. So I have installed to the whole drive.

I would like to have the recovery partition back, just in case I decide to sell it again and lose or damage the discs.

I looked at trying to shrink the drive, once installed, to create a separate partition for the Windows software (although still no idea if this would then be a 'recovery' partition. But it would only allow me to shrink it in half and I though 100gb odd was a bit big for a recovery partition and only left 120gb odd storage then.

So - is there anyway I can partition the drive and create a recovery partition now I have installed W7 starter on the whole drive. Or, if not, and I have to start the reinstall again - how do I create a recovery partition at the installation stage please? As both options seemed the... Read more

Answer:Reinstalling Windows 7 starter - how do I create a recovery partition

Hello and welcome Hazel mate did you doa job or what LOL!!

Seriously take a look at this probably the best option if you have an activation code on the sticker on the bottom of the machine.

Clean Reinstall - Factory OEM Windows 7

9 more replies
Relevance 64.37%

Desktop PC : compaq SR1170NX, windows XP home edition

Probelm : IDE hard drive got crashed, replaced it with a new one.

Question : my old hard drive had a system recovery option in it, so if i had any problem before i just ran system recovery and it was good to go. Is there any way i can create a system recovery in another partition and set it up in same way like my previous hard drive. I done have recovery disk but i have windows XP home edition installation disk from where i did my installation this time using product key on side panel. please suggest

Answer:how to create system recovery in other partition in fresh installation ?

You would have to partition your main Hard Drive into 2 drives (Drive C: and D: or purchase another HDD) Once you get your C:Drive working perfectly and have all the drivers, updates and software you like installed, then you would Clone your C: drive to the D: drive using Ghost, Acronis or XXClone Then if your C: partition has a problem you can restore from your D: partition. Of course if the whole hard drive takes a dump, this won't help you, unless you had a separate HDD.

2 more replies
Relevance 64.37%

I am trying to use the recovery media to install the factory settings W7 to a newly installed Intel 310. I have installed the 310, and it is definitely there and recognized by the computer.  I have removed my HDD and plugged in a DVD drive.  Also on hand are the successfully created recovery media (1 CD + 3 DVDs). I put in the CD and boot via the DVD drive.  The Windows screen comes on and then it goes to R&R.  From there, I cannot for the life of me figure how how to start the ball rolling on installing W7 to the msata drive.The two options presented appear to be to install a previous recovery backup, and none are listed.  Or to recover from an image, which then takes me to a screen that does not seem to identify an image no matter which of the four recover discs I put in. Is there any Lenovo page that shows step by step to re-installing recovery media from disk?  I'm not a complete newb so this is frustrating. My only guess perhaps is that I need to create a partition on msata before starting the factory recovery.  Not sure why that would be the case in that the factory recovery probably has utilities built in to do so, but I can't think of anything else. Thanks for any help.

Answer:Do I need to create partition on msata before factory/recovery install?

I used the Recovery CD/DVD too.  As you did, I removed the original 320GB drive.  Then I did format the 310 SSD and had no problems. Jim

5 more replies
Relevance 64.37%

Can I "Create a recovery drive" from the Control panel which will create an USB image and then use it to install windows on a bigger SSD? This will save me time to install a fresh Win and then download all the drivers again. Thanks.

More replies
Relevance 64.37%

Hello!

I've bought a new Toshiba Satellite L500-19E with Windows 7 Home Premium (64 bit). So far, everything's working brilliant.
I've already created the recovery dvds.
Therefore, could I now delete the partition with the recovery programm? I want to use the full space of my hdd and create partitions as I want.
But I don't know how I should do this?
Could you please help me?

greez

Answer:Satellite L500-19E - Deleting recovery partition and create new

If you are 100% sure the created recovery DVDs are ok you can remove all saved data on second partition.
Open Windows Explorer and on the left side where is second partition listed click with right mouse button on it and choose option FORMAT.
Choose Quick format option and click on START.

After minute or two all data will be gone.

Please note: in the future when you want to use recovery DVD for Win7 installation the whole HDD will be deleted and you will lose all your data.
Using recovery DVD you cannot format partition C only.

8 more replies
Relevance 64.37%

I want to change the harddisk and so I need the recovery CDs to install the system. Would anyone please tell me how to do that? thanks a lot for your help!  

Answer:[Ask for help]How to create recovery CDs from preloaded partition for T40 Model 2373-76A?

cheory wrote:I want to change the harddisk and so I need the recovery CDs to install the system. Would anyone please tell me how to do that? thanks a lot for your help!  Click on Start/All Programs/ThinkVantage/Create Recovery Mediaor check for Access IBM.  There should be an option to create the media. If that doesn't work or you can't burn the discs ask check if your machine has warranty left. If so give them a call and ask if you can receive the recovery media. Please be aware that Lenovo can only sent out the media once. So if somebody sold you the book and asked for media you won't get any unless you'd be willing to pay for them. Hope that helps Cheers

1 more replies
Relevance 63.55%

I am dual booting Windows 7 and Windows 10 both pro. During setup I ran into trouble with the recovery partition. I managed to recreate the partition layout as so: Recovery, EFI, Recovery, MSR, Win7, Win10, Shared, Drivers, SystemImages.
The first recovery partition is for WinRE and the second one is for Lenovo Onekey Recovery (if I decide to use it) or if possible something like macrium reflect. The SystemImages partition is for storing factory default images of the two OS. I will create the images myself to avoid bloatware.
I was able to create a recovery USB drive in Windows 10 but that does no good for my Win7. Also as I have never been able to successfully restore any version of windows using a backup from either windows recovery or third party options, I would like to have system images from both WinRE and another option just to make sure.
I generally find myself re-installing my os(s) about once a year in order to refresh and speed up my computer.
Recap: How to Make WinRE bootable partition and how to make Macrium Reflect bootable partition? I already have partitions made, but cant seem to get WinRE onto the partition or recognized by the os, and cant find find a guide on putting 3rd party recovery onto partition and make bootable.
Oh, also, Windows 10 RE should be able to create and restore a system image of Win7 if I just choose that drive instead of the Win10 drive, correct? (All dual booting guides say to only keep one Windows Recovery partition)
Thank You

More replies
Relevance 63.55%

Hi All

I installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?

Thank You
 

Answer:Solved: Does Windows7 Automatically create recovery partition during installation?

9 more replies
Relevance 63.55%

I am trying to install system recovery disk on this hp and when it is done downlaoding it says this error message"user partition cannot be created! system recovery cannot continue!" What should i do please reply with any answers to my problem, and thank you for your time.
 

Answer:failed to create user partition cannot continue system recovery

I'd start by downloading the disk manufacturer's diagnostic and running it. It may be that the drive is bad, which is causing you the issue.
 

1 more replies
Relevance 63.55%

Greetings,

When I first purchased my Acer AspireOne D255 back in 2010, I immediately deleted Windows 7 Starter and installed a dual-boot of XP Home and Ubuntu. However, recently I decided that I want Windows 7 back on the Netbook, so I ordered Recovery DVDs from Acer.

I would like to set up an encrypted dual boot between Windows 7 Starter & Kubuntu 12.04. I found a great tutorial online explaining how to do this:

[not sure if I'm allowed to post links to other sites]http:// stonesifer.org/2011/07/01/dual-boot-windows-7-encrypted-with-ubuntu-1104-encrypted/

Problem is that the tutorial won't work for me because I don't have the 100 MB System Reserved Partition. I want to follow this particular tutorial because it's very simple, and it ensures that if I switch to a different Distro later I won't have to reinstall Windows 7.

Now I did successfully follow the "Option One" instruction here to use Disk Management to create a System Partition:

System Reserved : Create Using Disk Management

All this accomplished however is creating a small partition that is not active, and certainly not at the front of the disk, and definitely not set as a System Partition.

Please help! I've spent way too many hours / days at this trying to figure this out on my own.

Edit: I have been using the "Disk Utility" in a Lubuntu 12.04 LiveCD to partition the drive...

Answer:Acer Recovery DVD Won't Create 100MB System Reserved Partition

Hi,

You should first install Windows 7 in the vanilla fashion - that will create the 100MB System Reserved partition and the usual System partition (usually C)

Then follow the tutorial you linked. Be very careful with Truecrypt. Create a backup of the volume header : see STEP 3 here:
TRUECRYPT - Encrypt Data Folders

9 more replies
Relevance 63.55%

...this may be a difficult question but i wil give it a shot....

i have a Toshiba Satellite A100 PSAA9E and a recovery disc set.
In the recovery disc for the OS ( win xp MCE ) there are two iso: PEbase.iso and the HDbase.iso.
After some digging in the ne i discovered what a preinstallation enivorment is and a prepared installation(sysprep) .

Now i'm wondering if it can be so simple to place the .tpa image of the Recovery disc in a partition and install it whit a pe that runs directly from that partition.

The only real obstacle is that there are some .inf and .sif that refear to the install partition statically and may be helpfull to know what was modified from the original version of xp MCE.

I know the question is not easy but i hope in the expertise of the admins

Answer:Re: How to create an instant recovery partition on Satellite A100 PSAA9E

Hi

> Now I?m wondering if it can be so simple to place the .tpa image of the Recovery disc in a partition and install it whit a pe that runs directly from that partition.

I doubt this will function? To be honest I never tested it therefore I cannot say exactly if it will work or not but in my opinion this is not possible?

Newer notebook model are equipped with HDD recovery option but this recovery works completely different. There is an additional menu which helps to start the HDD recovery procedure.

Your notebook supports Recovery Disk and this disk should be used to recover the notebook.

By the way; I?ve got a Norton Ghost Utility. I create my own image using this tool and placed it on the second partition. If something would go wrong with my OS I can restore the whole system using the ghost and the image file from the other partition.

Bye

1 more replies
Relevance 63.55%

Hi,

I've got an old Toshiba Satellite P750 (PSAY1A-01Y022). I have just upgraded my memory from 4GB to 8GB, and am planning to upgrade my HDD from 500GB to 1TB. I have ordered the HDD online and am waiting for it to arrive.

I am still trying to figure out how to create the Toshiba Recovery Partition when my new HDD arrives. I am doing the same for an old notebook, which I have manged to get something similar to it's original factory state.

I have looked at the recovery partition but cannot figure out how it was created. It is not NTFS. Does anyone have any experience in creating a Toshiba Recovery Partition on a new HDD?

And help is much appreciated.

Thank you and kind regards,
Dinesh

Answer:Satellite P750 PSAY1A: how to create the Toshiba Recovery partition on new HDD

Recovery partition can be created when you use original Toshiba recovery disc and install recovery image. Before OS installation starts partitions will be created automatically, recovery image copied on recovery partition and then as last step recovery image installation will start.

Some kind of files migration from one to other HDD is not solution.

Only notebook with ?factory settings? will have well working and usable recovery partition.

5 more replies
Relevance 57.4%

Hi, I am using a T400, window 7, 32 bits. Yesterday I accidentally clicked on  Start > All Programs > ThinkVantage> Create product recovery media or Create recovery media. I am not sure about which programs I clicked on but it appears an open up window asking me if I want to insert recovery disk, then I click no. It disappeared. It didn't tell me anything( like all the data will be lost and there is no progress box either; it happened very fast like in 5 seconds) and then I find that all my data in hard drive D is gone. I can not see hard drive D anymore in My computer. However I can find the partition titled "recovery partition" with 100% free storage in replace for my hard drive D in the storage management of  My computer and I cannot access it. I am so scared that I don't turn off the laptop 'till now. All the programs are working normal because I installed them on hard drive C but all the data on drive D is lost. Anyone has the same problems? I wonder such a serious software but doesn't have any prior notice to customer that it will cause data loss like this?Thanks.  

More replies
Relevance 56.58%

Hi everyone, I know this must sound like a real stupid title, but please bear with me for a moment: Having wiped my R50p clean with the "Access IBM" button, I noticed that I only had a C drive with 20 GB of which much was in use. In Windows XP Disk Manager I saw that there was a whopping 55 GB on a hidden partition that I only had the option of to "remove", not to activate or anything else. Realising that this was the hidden partition with the IBM restore files, I was hesitant to take any action. After doing some research on several forums I found that the recovery part should only take up 20 GB, which corresponded somewhat to the fact that Disk Manager showed 42 GB of 55 GB to be "free" (if only I could use the free space!). In order to access those magnificent 42 free GBs on the 55 GB hidden partition, I first created a ThinkVantage recovery disc (strangely it was only one CD-R) and disabled IBM Predesktop Area in the BIOS. As a result, I proceeded with deleting the 55 GB partition and it became unallocated space, therefore allowing me to make it a new partition and assign a drive letter (in this case D), doing a "quick format (NTFS)" in order to be able to use the space available, and finally giving me the full 55 GB. Since I had preferred to leave the recovery files on the hidden partition, but had no idea how to access the useful other 42 GBs, I followed the abovementioned procedure. Now my question is whether it's possible to recreate another hidden parti... Read more

Answer:?? Restore Recovery Partition with Recovery Disc after deleting Recovery Partition

pvanedan, welcome to the forum, after reading your post several times I think I understand your situation as it is now. The answer is as follows; which you may not like sorry  You have successfully deleted the recovery partition in order to gain more space, that's the good news  The cd you have created is only a boot cd and not a recovery cd, this would be used to boot your ThinkPad and access a recovery backup which is stored on another hard drive, cd/dvds or over network. It alone is not able to recreate the recovery partition which you no longer have, that's the bad news  I would suggest backing up your files regularly and using an appropriate imaging software to backup your installation. Edit: What I don't understand is; why 55GB? The partition should have been around 4GB, maybe it was full of backups??Message Edited by andyP on 07-03-2008 07:30 PM

4 more replies
Relevance 55.35%

Hello to Lenovo support(and community)! My laptop: Lenovo G560 (I have noticed some variable specification) I have bought G560 and it came with around 500GB hard disk;partition C: 420-430GB which is for application software, operating system, and user documents.partition D: 30GB for OneKey system reocvery and needed files, perhaps for factory restore.and two more partitions but they are invisible and only found them by running disk management. Now the problem is that I have my files(documents), app software and operating system on the same partition and I want to have only the operating system on C and have app and documents on another partition OR have a new 200-300GB(taken from C) for backups partition.**I know it is not recommended to have backups on the same hard disk, but this is a temporary solution. How can I shrink C to have unallocated space and use it to create a new partition(or more) without corrupting the D OneKey Recovery partition?   Thanks for supporting your customers!!!  

Answer:OneKey System, Recovery partition, need repartition. Will it corrupt recovery partition?

Hello OLL98, welcome to Lenovo forums!
 
You canīt use Onekey Recovery anymore if you change the partitions.
 
So please create your recovery media before, messing up with the partitions. My 2 cents.

2 more replies
Relevance 54.94%

Hello guys,'ve looked for everything that google and not found my solution.

Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"

I've tried to do some procedures, but also can not create partition, do not know what else to do.

I've tried also to give a "clean" and nothing also, can someone help me?

Thanks!!!

Answer:Setup was unable to create a new system partition - I can not create p

Check the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Hard Drive Diagnostic Procedure

9 more replies
Relevance 54.12%

T540p, Windows 7 Pro When I run the "create recovery media" tool, I am given the error: "No (sic) enough temporary space in C drive, Create Recovery Media will exit now." I have 89GB free on my 256GB SSD. My Recovery Partition is 16GB. How much free space do I need?

More replies
Relevance 53.71%

I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.

I was wondering if there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs. This way, my computer will possibly run faster, etc.

Could someone tell me how to do this?
 

Answer:I want to create a secondary partition, but I added all space on primary partition

You didn't mention what operating system you have.. that could make a difference... Vista has made it a little easier to do.
I'll assume you have XP.

1.) First defrag your drive.

2.) Then back up everything, because partition changes can easily wipe out your whole drive.

3.) Then, use a program such as Parted Magic, Partition Logic, or Partion Magic to change your partition sizes.
I'm not sure this will help you that much that it's worth doing, but good luck with it.
 

1 more replies
Relevance 53.71%

I am getting this error while installing windows 7 again!
My earlier win 7 got corrupted and i am trying to reinstall it.
I am using USB drive.
I have tried re-inserting pen drive and diskpart method to set the location of the partition.but both solutions are useless!
What can be the reason and what should i do?

Answer:Unable to create a new system partition or locate an existin partition

The problem is all your partitions are Logical.
The bootloader needs to be installed in a Primary partition.

You can delete Partition 4 so it becomes Unallocated space.
Then Windows should be able to create a system partition and install.
Installing in Unallocated space Windows will create 2 partitions, a System Reserved partition for the bootloader and a C partition for Windows.

Or, you could delete Partition 4 and create a new Primary partition.
If you install Windows into that Primary partition the bootloader and Windows will be in the C partition.
You won't have a System Reserved partition.

I like having Windows as the first partition, before any data partitions, but that would be more work if you want to move partitions around before installing Windows.

9 more replies
Relevance 53.71%

I would like to create a bootable partition from an existing Win 7 partition. I have two partitions bootable now. Both Win 7- one with dragon dictate and various software I am trying out (on a 1.5 TB drive) and the other is my regular boot partition on an SSD with the system reserved partition.

I would like to create an exact image of the regular SSD boot partition on the 1.5 TB drive with the existing win7 dragon partition (and other data drives) to do an upgrade to win 8 (avoiding reinstall of lots of additional software).

I have read lots of threads on related topics but haven't seen one that can help with this problem.

I have tried acronis DD 2011 copying the partition but it isn't bootable and easyBCD adds it but it always defaults to the dragon partition when selecting it from the boot menu.

I do have acronis 2011, 2012, and 2013 plus versions as well as 2011 disk director.
Also just downloaded partition wizard but thought I might try a question first. If there is a thread I missed that has the solution, please point me there.

Thanks in advance.

Answer:create dual boot partition from exisiting W7 partition on existing HDD

After re-imaging the partition to HD choosing Auto drive letter selection, Active partition and include MBR and Track0, unplug all other HDs, set target HDD first HD to boot in BIOS (after DVD drive), confirm partition is still marked Active then run Startup Repair - Run up to 3 Separate Times until Win7 starts with the System Active flags onboard.

If you are including the 100mb System Reserved partition then all of these things should be done choosing it, so that it remains bootable and starts Win7. Otherwise the steps applied to C will cut out the 100mb System Reserved as boot partition.

4 more replies
Relevance 53.71%

I bought a fairly new eMachines E528-2325 from a friend. before buying he decided to use DBAN 2.2.6 to wipe Windows 7 and install Ubuntu 11.04, after buying i requested him to reinstall Windows 7 using usb, so he again used DBAN to wipe the computer. Upon trying to install windows he got the error "Setup was unable to create a new system partition or locate an existing partition." We both cannot find a fix to this problem, and we have basic knowledge on computers. Please and thanks for any help.

eMachines E528-2325
Intel Celeron 900 processor
2GB DDR3 system memory
250GB SATA hard drive
DVD/CD drive doesn't work

Answer:Setup unable to create a new partition or locate an existing partition

Hello mrvoid, welcome to Seven Forums!

Boot the Windows 7 installer and do at least a clean to start and a clean all would be best; have a look at the information below and be sure to post back with any further questions you may have and to keep us informed.



To start fresh with a clean installation or clean install with an upgrade version of Windows 7, it may be best to over-write the Master Boot Record of any possible corruption and then use the Windows installer to create and format the partition(s) for installation, have a look at the "#6 clean" option of Method One in this first tutorial linked below. Secure Erase / Wipe : Definition and Methods
DISKPART : At PC Startup

If you want to completely wipe, over-write the entire Hard Disk Drive of any possible malware infection and / or to get the best possible space to do the install to or just for security purposes, have a look at these tutorials. SSD / HDD : Optimize for Windows Reinstallation
Additional Secure Erase / Wipe Information

9 more replies
Relevance 53.3%

Hi,

I have a main partition where my OS resides that is on a 500mb C: dirive. I want to shrink it to 100mb and free the remainder so that I can create a second partition that I will use only for data. I have a 500mb D: drive that is pretty full. I don't want to use the C: drive for data because if I do an image back up it takes too long and if I have peroblems with the operating system I don't want to loose my data. I was also think of installing a second OS on the new partition and make it bootable. I used MiniTools for the first time and it allowed me to shrink the main partition down but when I tried to make the new partiotion in the free space it came back with and error that said I already had four MBR and could not create a new one. The solution to this is to change one of my existing partitions to a logical drive first. Since I don't know what this means and didn't want to risk it I left everythig as it was and decided to ask for help.

I don't know if this is the right fourm for this if its not please let me know.

I'm including a snapshot of what MiniTool shows about my partitions.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 4086 Mb
Graphics Card: NVIDIA GeForce GT 230M , 1024 Mb
Hard Drives: C: Total - 461130 MB, Free - 396849 MB; D: Total - 476937 MB, Free -... Read more

Answer:Solved: Shrink existing partition and create a second partition

7 more replies
Relevance 53.3%

I have a hard disk that the Disk Management diagram shows 4 partitions left to right:

110mb Healthy (OEM Partition) / 10GB Healthy Active Primary / OS (F) 136.44GB (Healthy

Primary Partition / 2.50 GB (Healthy Primary Partition)

(see screenshot)




I tried reformatting it but the reformat window would only allow the reformat of the OS partition

How do I reformat this disk to use its total 150 GB of space instead of the 136GB of storage it currently allows?

Thanks for your help

Answer:How to reformat a 4 partition disk to create 1 partition for storage

I would suggest you to use Partition Wizard Bootable CD .

For deleting all partitions of disk1 : Help on how to Delete All Partitions with partition manager - Partition Wizard?

For creating a new partition there : Create Partition help of partition software - Partition Wizard.

(all the links contains a video guide , at the bottom of the pages content. )

Alternatively, using disk management :

you can delete all the partitions : Partition or Volume - Delete

And create a new one : Partition or Volume - Create New

3 more replies
Relevance 53.3%

Hey there guys. Can you please help me solved this problem. sorry for my bad english.

I'm using Compaq Presario CQ40-627TU

My Laptop Spec

Intel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)

- 2048MB 800MHz DDR2 Memory
- 320GB 7200rpm Hard Disk Drive
- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightview
technology

and i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage (movies,drivers,mp3,picture and etc).

last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.

After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.

i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)

i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like tha... Read more

Answer:Missing Partition and Unallocated Space (Can't Create New Partition)

Are you still trying to recovery your deleted partition or data? The tool for this is Paragon Rescue CD. Rescue Kit Free Edition | PARAGON Software Group - free partition software, hard disk partitioning

The tool to use for cleaning HD then partitioning is free Partition Wizard bootable CD. Back up your files, Boot CD, select 1 for screen res, on Disk tab choose Wipe Disk and apply zeroes to HD to wipe the GRUB which will interfere with Win7 install.

Then use PW CD to Create new partitions, Primary for OS and Logical for Data. Install Linux last following this tutorial to Dual Boot with Windows: Where to install ubuntu in my system?

9 more replies
Relevance 52.07%

I want to create a third Partition using Vista's new Partition program.

I have 222 GB space on C:Local disk and 10.4 GB space on D:Recovery
I am currently using about 70 GB (programs & files) on the C:
which leaves 151 GB Free space.

I would like to move all my programs and picture/music/word files over to a new partition, but I'm not sure what size the new partition should be.

Are there any standard procedures (other than backing every file up) that I should follow, as far as partitioning goes?

Do I have to extend or rename anything already existing? Or do I just create a new "simple partition" with that program that comes with Vista?

I sure appreciate any help and precautions you can throw my way.

Thanks
Machelle
 

Answer:I want to create a third Partition using Vista's new Partition program.

sorry im no good at typeing drop me a line on skype at darklionb or gtalk at [email protected]
 

1 more replies
Relevance 52.07%

I would like to create 2 more partitions on a ThinkPad x230t tablet: one partition for all my files and other partition to install ubuntu OS.According to Disk Management the computer already has the following partitions:SYSTEM_DRV              Simple, Basic, NTFS, Healthy(System, Active, Primary Partition)Windows7_OS(C        Simple, Basic, NTFS, Healthy(Boot, Page File, Crash Dump, Primary Partition)Lenovo_Recovery(Q   Simple, Basic, NTFS, Healthy(Primary Partition)I have read that there is a limit to the number of primary partitions allowed and that partition type and placement matter.Any suggestions on how to proceed are welcome.Thanks.

More replies
Relevance 50.84%

Hi, I have a just purchased the ThinkPad E550. I want to create recovery disks for the system. I have already upgraded the laptop to Windows 10 (system came with Windows 7). There is no OneKey Recovery icon that I can find, and I understand that this may not be available for anythign above Windows 7. How do I create the recovery disks? Thanks

Answer:How to create recovery disks for ThinkPad E550 with Windows 10 and no OneKey Recovery option

Hi srm17,
Welcome to Lenovo Community.
Does this help?  http://www.techradar.com/us/how-to/software/operating-systems/how-to-create-a-windows-10-recovery-di...

3 more replies
Relevance 50.84%

There are discussions on creating recovery disks with OneKey Recovery 7.0. But my G500 is  with win8.1 and Onekey 8.0. I didn't see it support creating CDs. And when I tried to create such a recovery image, OneKey 8.0 said it needs 90G space. It looks like OneKey will backup all files from my C disk. I just want to create factory recovery disks, in case the HDD failed. Can anyone tell me how to create such disks? (It doesn't make sense to spend 60$ to order such disks from Lenovo)

Answer:how to create factory default recovery disk with OneKey Recovery 8.0? (G500, win8.1)

hi lenovo-user-kw,
 
Thanks for Posting!
 
Yes that option is not available on Windows 8 and 8.1.
 
This is tha way i think possible to extract a recovery media
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024
 
 
Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

2 more replies
Relevance 50.84%

Greetings everyone! Problem 1I have a new Y480 (Windows 7 - 64 bit). When using OneKey Recovery and choosing to attempt burning 'recovery discs with existing backup image', then the defaults are chosen on the next screen (Source: Default Path; Image Path: D:\Lenovo\OneKey App\OneKey Recovery\backup.wsi), an error of: "The image file is not valid. Please select a valid image file" appears. The 'Select Another Image' option under the 'source' cryptically proves no help. Problem 2Also, It was stated in the documentation that system backups could be made to discs. NOT! Apparently the only option is a hard drive. It does not allow the disc drive to be a destination. BTW... the D: partition is too small to accept a system backup! Who planned that out? So... anyone out there able to help me make 'recovery discs with existing backup image'? Thanks!

Answer:Y480: OneKey Recovery: Cannot 'Create Recovery disc with existing backup image'

Scolex wrote:Greetings everyone! Problem 1I have a new Y480 (Windows 7 - 64 bit). When using OneKey Recovery and choosing to attempt burning 'recovery discs with existing backup image', then the defaults are chosen on the next screen (Source: Default Path; Image Path: D:\Lenovo\OneKey App\OneKey Recovery\backup.wsi), an error of: "The image file is not valid. Please select a valid image file" appears. The 'Select Another Image' option under the 'source' cryptically proves no help. Problem 2Also, It was stated in the documentation that system backups could be made to discs. NOT! Apparently the only option is a hard drive. It does not allow the disc drive to be a destination. BTW... the D: partition is too small to accept a system backup! Who planned that out? So... anyone out there able to help me make 'recovery discs with existing backup image'? Thanks!Hmm since the laptop is new,i would restore to factory settings, that may be best . Double click the OKR icon on your desktop and click on ''System Recovery'' a notice will pop up ''Do you want reboot your computer,into the system recovery environment'' click yes and then follow instructions. Please note ''?nitial state''stands for factory settings,so choose that when the option appears. Now AS SOON AS  the system is recovered,BEFORE doing anything else, please check to see,if your current problems  still exist Let us know how it goes.&nb... Read more

4 more replies
Relevance 50.84%

Recently purchased Toshiba Satellite C660-21Z and tried to create recovery discs as recommended. Recovery Media Creator consistently fails on both Disc #1 and #2 with error messages during validation:

Failed to read E:\sources\boot.wim (Error Code 020150-20-00000000).

Have tried different DVD types without success. Anybody able to help?

Answer:Recovery Media Creator failing to create system recovery discs

Hello

Check please THIS thread and i hope you will find solution to this.

Good luck

4 more replies
Relevance 50.84%

I have ORK 6.0 preinstalled and I created a backup as soon as I bought the machine. The backup worked fine but I can not create recovery disks since the combo box where you are supposed to chose the drive where the backup will be copied is empty. Any ideas? Thanks in advance   

Answer:S10 - One Key Recovery - Select Drive combo box is empty when I try to create a recovery disk

To create recovery disks, you need an optical drive capable of writing to either CD or DVD media [depending on which method you are using]. I don't  think the S10 has an optical drive so you are left with two options. 1) Connect an USB CD or DVD writer and create the recovery disks. 2) Use VirtualCD to create a virtual CD/DVD writer to which you can write your recovery disks and then transfer to another computer I would actually recommend that after you have created recovery disks, that you look into creating a recovery USB instead of having to carry an USB optical drive with you all the time. Since the recovery disk is based off of Windows PE 2.0, you can do step 3 in this article to make your USB flash drive bootable. Then copy all the files on the recovery disk to the USB. If you use max compression when creating the backup, you can get away with using a 4GB flash drive.





\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

3 more replies
Relevance 50.84%

Hi,

I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?

Thanks for your help.

Answer:Satellite U400 Impossible to create recovery DVD with Recovery disc creator

>I did add some files to this partition, could this be the problem ?
No. if you didn?t change partitions structure this should not be the problem.

Question is: does Toshiba recovery disc creator start or not? If you cannot star this tool it has nothing to do with recovery files.
Can you find this file - C:\Program Files\Toshiba\TOSHIBA Recovery Disc Creator\TRORDCLauncher.exe ?

4 more replies
Relevance 50.84%

Hi All, I am prepping a new Lenovo Yoga 13 for a user.  I want to create recovery DVD(s) for the new system with the OneKey Recovery software.  When I open the application there is no option to create media.  There are only a backup option and a restore option.  I called tech support and they advised if I attach a DVD drive the option to create media will appear.  I did this but no luck.....  I am attaching first a picture of what I see when I open One Key Recovery And secondly to show that I do have a usb DVD connected here is a picture of the DVD attached with a blank DVD inside it.  I have downloaded the lastest update to the One Key Utility and am running version:  8.0.0.1519.  Can anyone give any insight as to why the create recovery media isn't there for me?.....













Solved!

Go to Solution.

Answer:Yoga 13 doesn't have an option to create recovery media in onekey recovery

I found the answer to my own question.  Essentially in version 8 there is no way to create recovery media with this utility.  I came across the following link which I am going to try:  http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024

1 more replies
Relevance 50.43%

Hello, I never created recovery disks when I purchased my T60 over three years ago.  I regret that. Now I am wondering if it is possible to do so.  When I launch Create Recover Media (rrmedia.exe), it crashes immediately:AppName: rrmedia.exeAppVer: 1.0.0.1ModName: unknownModVer: 0.0.0.0Offset: 0018089aEventID: 1000 I cannot request recovery disks from Lenovo, because my system is out of warranty now. So I think it is either it is impossible to use rrmedia.exe at this point (since in the meantime, I've upgraded to XP SP3, etc) or I need to upgrade or reinstall Rescue and Recovery.  However, trying the latter opens up a can of worms: 1) Rescue and Recovery shows version 3.01.0037.  Running system update to patch to 3.01.0042 fails: "A later version of 'Rescue and Recovery - Client Security Solution' is already installed on this machine.  The setup cannot continue." 2) When I try to uninstall RR from Add/Remove programs, it fails: "Another version of this product is already installed.  Installation of this version cannot continue.  To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel" 3) When I try to upgrade to the latest 4.xx, it says I must first uninstall the current version, which from the above, I cannot do. So the machine is confused as to which version it has, and it won't let me upgrade, uninstall, or reinstall. In summary:&... Read more

More replies