Computer Support Forum

change power settings based on location

Question: change power settings based on location

Hi is there anyway to automatically switch power setting based on my location. Say if I'm connected to my home network be in high performance mode. Or perhaps a program that does this? If not does anyone know how I might go about creating one ( I'm a computer science student) thanks, Laurie

Relevance 100%
Preferred Solution: change power settings based on location

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: change power settings based on location

No, i do not think that there is a way to do that.

3 more replies
Relevance 98.81%

I'm curious if it is possible to change Windows settings based on my laptop's location. What I would like is a few settings (GPOs) to change based on whether I am at home vs anywhere else.

I'm guessing that detecting the wireless/wired network I'm connected to, or looking for a server or specific piece of hardware (laptop dock) are the best ways to reliably determine the laptop's location. I'd prefer not to set up a Windows domain at home, however I'd imagine it would make it easier to accomplish what I'm trying to do.

I would prefer a native solution, however third party programs, scripting or programming is acceptable. I'm using Win 10 Pro x64.

More replies
Relevance 88.56%

Say you want the computer automatically to go into Power Saver mode at night, High Performance during 9-5pm hours, and then Balanced at other times. Is there a way to do this?

It might be doable using task scheduler and the powercfg command, but the main issue with that is if you computer is sleeping, it probably won't execute the command to take it out of sleep.

Send me your ideas and comments.

Answer:Change power settings based on a schedule?

if your computer is sleeping, then I dont think it matters which power mode it is in. Otherwise, this is a good Idea and I am interested as well if anyone finds a setup.

1 more replies
Relevance 75.03%

I have two desktops (work and home) with more than one screen, on these computers, I would like my start menu on the far right side of the right screen.

However, on computers with only screen (my laptop), I would like my start menu along the bottom.

Is there any way to set up an IF statement that places the start menu in a location based on the number of screens or, worst case, stop that property from updating across computers?

Answer:Change Start Menu location based on number of monitors

Originally Posted by GentlemanS


I have two desktops (work and home) with more than one screen, on these computers, I would like my start menu on the far right side of the right screen.

However, on computers with only screen (my laptop), I would like my start menu along the bottom.

Is there any way to set up an IF statement that places the start menu in a location based on the number of screens or, worst case, stop that property from updating across computers?



To stop syncing your settings across PCs, have a look at this: Desktop Background - Change in Windows 10

2 more replies
Relevance 75.03%

I have two desktops (work and home) with more than one screen, on these computers, I would like my start menu on the far right side of the right screen.

However, on computers with only screen (my laptop), I would like my start menu along the bottom.

Is there any way to set up an IF statement that places the start menu in a location based on the number of screens or, worst case, stop that property from updating across computers?

Answer:Change Start Menu location based on number of monitors

GentlemanS said:

I have two desktops (work and home) with more than one screen, on these computers, I would like my start menu on the far right side of the right screen.

However, on computers with only screen (my laptop), I would like my start menu along the bottom.

Is there any way to set up an IF statement that places the start menu in a location based on the number of screens or, worst case, stop that property from updating across computers?



To stop syncing your settings across PCs, have a look at this: https://www.tenforums.com/tutorials/4...a.html#option4

3 more replies
Relevance 71.34%

I overclock my CPU by changing its FSB and I have scheduled (Task Scheduler) this script to run every time I logon to Windows. But I would like to schedule it to downclock when I pull the power cord and then overclock as I plug it back in. Is this possible? It would also be nice if Windows changed the power plan when switching between AC/battery.

Answer:How can I change power plan and run scripts based on power state?

Hello Apex,

I'm not sure it's possible to have Windows change power plans automatically like that.

However, if you like, you could use either tutorial below to help make it easier to manually switch between power plans whenever you like.Power Plan - Choose from Desktop Context Menu in Windows

Power Plan - Create Shortcut to Change Power Plan
Hope this helps some,
Shawn

1 more replies
Relevance 70.52%

I keep trying to change the settings, but it won't let me choose anything but my dvd rom drive, even though it says that's not a good place to save the data. The only backup destination it shows is my DvD Rom drive:E Help!

Answer:How do I change the location settings of my W

what other storage do you have?Some HELP in posting on Computing.net plus free progs and instructions 7 Medals

3 more replies
Relevance 69.7%

Hi,I have 3 accounts on XP SP2 and want to change the default location of the documents & settings folders.I've used Tweak XP UI to change the My Docs, My Music etc fro all 3 accounts to the F drive, but can't move the shared docs (or the rest of the documents & settings folder.Is this possible? If so can anyone point me in th right direction.Thanks.

Answer:change location of documents & settings

Per Microsoft:NOTE: This method relocates key Windows components. Use this method only if you require the "Documents and Settings" folder to be moved or renamed and you cannot use the Unattend.txt file to change the name during installation.To specify a different folder for the entire "Documents and Settings" folder, including key system components, follow these steps: 1. Log on to the computer as an administrator.2. Create a new folder.3. Open the current "Documents and Settings" folder.4. On the Tools menu, click Folder Options, and then click the View tab.5. Under Advanced settings click Show hidden files and folders, and then click to clear the Hide file extensions for known file types and Hide protected operating system files check boxes.6. Click OK.7. Click and drag to copy all the folders to the new folder, except for the currently logged on users folder.8. In Control Panel, double-click System, and then click the User Profiles tab.9. Copy the current user's profile to the new folder.10. Click OK, close Control Panel, and then log off and log on to the computer as an administrator again.11. In Registry Editor, click Find on the Edit menu.12. Type documents and settings, and then click Find.13. Replace the value data or rename the value or registry key to the new path for each and every registry key and value that contains the original path.NOTE: You must complete this change for every instance in the registry or your computer may not start. It is imperative that you up... Read more

3 more replies
Relevance 68.88%

I am using windows 7 and would like to separate system and programme files from documents etc to assist with backups and also restoring windows if required. I would like to keep my documents files in another partition from the C drive. I have read that this can be done by changing the file location in my documents. Do you know how do I do the same thing for all the other personal files like windows live mail folders and internet explorer files etc please? Or, is there a better way of getting personal information onto another drive?ThanksBroooz

Answer:Change location for documents and settings files

Theres no point in having your files on a seperate partition,if your drive dies,so do your files.Personely i think an external drive is the answer,others may know better of course.

10 more replies
Relevance 68.47%

I'm thinking about trying Thunderbird; but, I have a question about where it stores user mail and settings. My user data, including mail and mail account settings, is stored on drive D for ease and simplicity when backing up user data. I can't find anything in the Thunderbird documentation that tells me how to set Thunderbird to store data at a different user-preferred location.

During the installation of Thunderbird just a few minutes ago, I told it to import settings from Eudora; but, I found later it had moved all my mail and user settings from drive D to drive C into the Users folder. This is unacceptable.

How do I change that?
 

Answer:Thunderbird--How to change the default location for mail and settings?

11 more replies
Relevance 68.47%

I followed the tutorial Documents Folder - Move Location in Windows 10 to move my Documents folder to a separate partition. Did the same thing for my Music, Pictures and Video folders. Everything worked great.

Nevertheless, the Win10 Settings app at Settings > Storage > Change where new content is saved still thinks the default location is in the C: drive. I know this is wrong because my user files are being saved to their new location, as expected.

Why does the Settings app still show the original location - or perhaps I overlooked something?

Answer:Change to Location of User Folders Not Reflected in Settings App

Hi, this may help to explain the difference:
Change Storage Save Locations in Windows 10 - Windows 10 Customization Tutorials

3 more replies
Relevance 67.65%

Hi,
I just build up a new pc and changed from W7 to new era of W10 :-) Was not that easy and pleasant experience as I thought.
I have huge storage capability with this new pc but since I'm using very fast Intel 512Gb 600p M.2 SSD as C drive, I also want to make sure that all of my self created data will be stored to another disk, let's call it D.
After extensive research, I found out that there are so many different guides how to change user folder locations for the following user folders (music, downloads, documents,pictures and videos) as well for changing the Windows 10 storage settings. All those guides are a bit confusing to me since I'm not ICT pro...

I already know that one can change the individual user folders (mentioned above) by just changing its location from folder preferencies. Here is a pic where we can see that I have already changed the location for the following user folders; pictures, downloads, music, document, favourites, and saved games). User folders Search, links, onedrive, desktop and contacts are still in C drive.
I have not yet made any changes to W10 Storage settings as they remain default (C drive). If I have understood right by changing the storage settings in Windows it would lead to situation that W0 creates another library but user folders would still remain on C disk as default. This would lead to situation that user would have multiple storage locations. Am I correct?
From the picture 1, we can already see one of the problems as Adobe Cr... Read more

Answer:W10 Storage settings and user folder structure. How to change location

Risto said:

Hyv?? Itsen?isyysp?iv?? Kari!

Best regards,
Risto



Kiitos Risto, toivottavasti juhlat oli OK siell? koti-Suomessakin

As this is an English site, here the above in English: Risto wished me good independence day, our beloved Finland celebrated her 99th birthday yesterday Tuesday December 6th.

I thanked him saying I hope the party back in Finland was OK.

OK, that being said, I have to say that you are wrong : The procedure to use Sysprep to relocate Users folder is really simple; it's just that because the procedure is not known by average users that I have tried to make the tutorial as complete and comprehensive as possible. Reading it through, doing it exactly as told requires no technical skills or specific PC knowledge. The procedure is designed by Microsoft and is done using native Windows tool Sysprep.

It is the only valid method to relocate absolutely every file and folder (including system folders like Temp, AppData and so on) in various user folders to another drive. When done on an existing system it relocates all existing user profiles, and then as when done on new installation Windows locates all future new user profiles to drive you have selected.

I do recommend using Method One, clean installing Windows and doing the relocation while installing. However, if you go for Method Two, relocating Users on an existing Windows installation, please watch this video from the beginning of Method Two:





Tutorial:... Read more

5 more replies
Relevance 67.65%

Hi,
I just build up a new pc and changed from W7 to new era of W10 :-) Was not that easy and pleasant experience as I thought.
I have huge storage capability with this new pc but since I'm using very fast Intel 512Gb 600p M.2 SSD as C drive, I also want to make sure that all of my self created data will be stored to another disk, let's call it D.
After extensive research, I found out that there are so many different guides how to change user folder locations for the following user folders (music, downloads, documents,pictures and videos) as well for changing the Windows 10 storage settings. All those guides are a bit confusing to me since I'm not ICT pro...

I already know that one can change the individual user folders (mentioned above) by just changing its location from folder preferencies. Here is a pic where we can see that I have already changed the location for the following user folders; pictures, downloads, music, document, favourites, and saved games). User folders Search, links, onedrive, desktop and contacts are still in C drive.
I have not yet made any changes to W10 Storage settings as they remain default (C drive). If I have understood right by changing the storage settings in Windows it would lead to situation that W0 creates another library but user folders would still remain on C disk as default. This would lead to situation that user would have multiple storage locations. Am I correct?
From the picture 1, we can already see one of the problems as Adobe Cr... Read more

More replies
Relevance 65.6%

Hi everyone, thanks for looking.
Im running into a particular problem that I cant seem to find the reasons or the settings.

I watch HBO GO (i have a valid subscription) on my Windows 7 Home laptop and use an HDMI cable to connect my TV.

Scenerio 1:
If I leave the close the lid power option on hibernate, I must leave the laptop open and, when I connect the HDMI the TV, it becomes my monitor and I view as the monitor and watch anything full screen no problem.

Scenerio 2:
I change the power option on the lid close to "do nothing". When the HDMI cable is hooked up, if the laptop is open it uses the laptop display, if its closed it displays through the HDMI/TV. This is perfect and exactly what I want.
I can watch as the monitor no problem HOWEVER, if I choose full screen, I get gray borders and the "Full Screen" is not full and just centered.

I can not for the life of me figure out why and Im going crazy.
Does anyone know why the power option would have an effect on this and what settings I could change?

Many Thanks in Advance!!!

Max
 

Answer:External display settings change when Power options change?

Check to see what resolution your laptop's display is at, what the external TV resolution is when you connect it to your laptop, and MAYBE what resolution the videos you're watching are. This just sounds like a resolution issue. If the TV is at a larger resolution than your laptop's resolution, change the TV's resolution to the size your laptop is at. Then try watching a video to see what happens. Hope this helps.
-Lance
 

2 more replies
Relevance 64.37%

This is a computer I have put together which was running Windows 7 and has been upgraded and running Windows 8 for two weeks with no problems. When I went to review the advanced power settings nothing happens when I click on the link for change advanced power settings. You can see the screen flash very quickly but the power options dialogue does not appear. Any idea what applet runs this dialogue so I might try running it manually? Any ideas on troubleshooting this? Thanks for any insight.

Answer:Cannot Oplen Power Change Advanced Power Settings Link

Just to be clear, have you tried it via Control Panel> Power Options> Change Plan Settings (link)> Change Advanced Power Settings (link)>

9 more replies
Relevance 61.09%

I recently changed my power settings for the screen to go blank after 1 minute while everything else was set to never while burning a DVD. Now I can't get it to change back. I go through the power settings and it looks like everything is working, but after 1 minute of no keyboard or mouse activity, my screen goes black. My system is a Gateway, OS Win XP Pro w/ SP2, 2GB RAM, NVIDIA GeForce 6600 LE (128 MB), Monitor SONY SDM-HX73 DVI digital. Not sure how much of that might be relevant, but hope I included any information that you might need.Someone else recommended I try the following http://www.kellys-korner-xp.com/regs_edits...rcfgrestore.reg, which I did to no avail.Any suggestions would be greatly appreciated.Peg

Answer:Can't Change Power Settings

I'm guessing that you are using the Power Options in the Control Panel. After setting the changes that you want, you are clicking on Apply and then OK?

4 more replies
Relevance 61.09%

Hi. I had previously set my system to "Do nothing" when I physically press the power button, to avoid accidental manual shutdown. Well I was doing something and accidentaly pressed the button. The computer shutdown. I checked again under power settings, and the "Do nothing" option was indeed selected.

Any ideas?

Answer:Power settings don't really change anything?

I think the Power settings option applies only to the Start menu power button, not to the keyboard/ Tower physical button. Try remapping the power key to something non-functional with Sharpkeys.

Map Any Key to Any Key on Windows 7 / XP / Vista - How-To Geek

6 more replies
Relevance 61.09%

I have a power setting for battery and for plugged in power. I dont want standby when I'm plugged in. Whenever the battery is unplugged, the settings go automatically to the battery settings, but when I plug the power back in the settings don't change back to my plugged in power settings (the settings that have no standby). Also, whenever I come out of standby my resolution is off. The clock reads of the screen and the only way to fix it is to turn res down and back up again.

Answer:Power Settings Always Change

I assume this is a laptop you are talking about ... what is the make/model? Are you using the windows power management or are you using third party software that came installed on the computer to manage your power settings?

9 more replies
Relevance 60.68%

Hi, I have been having some issues changing the power settings on my Dell desktop running Windows 7 Ultimate. When i go into Control Panel and then into Power settings all i get is a little red circle with a x in it. Any ideas?
Untitled | Flickr - Photo Sharing!

Answer:Unable to change Power settings

Have you tried booting in Safe Mode?

5 more replies
Relevance 60.68%

I would like to change the Power Settings on a Windows 8.1 computer. But When I go into the control panel for the power settings, I get a blank screen as shown here:Then when I click the link "Change when the computer sleeps" I get this screen:When I click "Why can't Windows retrieve this information?" I get this screen:How do I configure my hardware to allow me to change the power settings? I have changed the settings before, but currently the computer will not allow me to change the power settings.Any information would be helpful. Thanks.

More replies
Relevance 60.68%

My dad has a laptop with 2 users setup. He does not have admin settings. I tried to set it so it does not switch off when he closes it but he does not have permission to change settings. I changed it in the admin account but it has not changed his account. Any ideas? Thanks

Answer:Help me change my dads power settings?

get your dad to post?johnny

9 more replies
Relevance 60.68%

Greetings,

I am attempting to temporarily disable hibernate and make sure the monitor doesn't go off while I am running a script to complete system configuration.


Code:
control powercfg.cpl -monitor-timeout-ac 30
control powercfg.cpl -monitor-timeout-dc 30
control powercfg.cpl /hibernate off
I believe the code above should work, but what's happening is the control panel applet for power settings is launching when this script runs.

Can someone help me make this so that:
The control panel applet doesn't launch
The settings are only made for the current logged on user

I also would appreciate knowing how to revert the setting changes I made at the end of my script

Thanks!

Answer:Script to change power settings

Well you are calling on the .cpl so it is going to open.
Have you tried using the old powercfg.exe method instead?
I don't believe it opens a window on execution
Just go into command window and type powercfg.exe /?
for the list of switches for it.

2 more replies
Relevance 60.68%

I am unable to change my power settings. I tried to change to default and when I try to close out of the window it only gives me the "cancel" option highlighted, save is there but can't click on it. I am logged on as admin. I hve had this happen on some other things as well.

More replies
Relevance 59.86%

Hi,

I use a Vista Enterprise Laptop for work, of which I am in the administrator group and can Install/Remove Programs and do just about averything else other than the Power settings.....

I want to remove my password login after resuming, but this is greyed out and it says some settings are controlled by the system administrator, but yet I am listed as administrator?
Also I I try to access gpedit.msc, it says I may not have access rights?

Please help

Ron

Answer:Unable to change power settings as Administrator

Hi ronvegas

You may be an administrator, but you are not the system administrator, have a word with your system administrator.

2 more replies
Relevance 59.86%

Is not working. It says: "some settings are managed by your system administrator".
I am the only user in the PC and I have administrator rights.
UAC is on (without notifications).
I want to be able to Hibernate the computer.
This is Win10 x64 on dual boot (GRUB) with Ubuntu 17.04 x64.

TNX

Answer:Power Options > Change settings that are currently no availble

Have you installed any 3rd-part apps to control or display power settings? Or used group policy or regedit to alter power behaviour?






"*some settings are hidden or managed by your organisation" means ... that there's a non-standard registry setting. Whether this was set through group policy, a third party app or by the user themselves in Regedit can be difficult to track down.



Restriction Notice on Windows Update Pages

14 more replies
Relevance 59.86%

My new Y510P recently stopped asking for a password after being in sleep  mode. I have tried changing it in the Windows 8 "change PC setting" and also under the Control Panel "edit power plan." And I have tried rebooting several times, and changing the password, to no avail.Recently, it also started going into hibernation if I leave it in sleep mode. I never wanted it to do that, and I never changed a setting. It just started happening Any ideas?  Thanks!













Solved!

Go to Solution.

Answer:Unable to Change Power Settings Y510p

hi rpiandrew,
 
Welcome to the Forums.
 
Can you try the following:
1. Press the Windows logo key? +R and type netplwiz or control userpasswords2
2. On the User Accounts Window, ensure "User must enter a username and password to use this computer" is checked, hit apply then ok, reboot and observe the PC.
 
Link to picture
 
3. As for the unit going to hibernation mode when put to sleep, have you tried disabling hybrid sleep / hibernation mode under the power optons?
 
Link to picture
 
Alternatively, if the system was working fine before, you can also perform a System Restore to rule out any possible corrupted Windows Update that might have caused the issue.
 
 
Hope this helps

2 more replies
Relevance 59.86%

Assuming I am using the correct terminology in my question but knowing that I am possibly talking about something else I will explain. Having done a fresh install of Win7 HomePrem I noticed that when I click on a drive I have to wake it up--it doesn't open immediately and I could here it begin to hum. Prior to my reinstalletion I did not have to do this--clicking on any drive would pop up a window immediately. Then I recalled that I had done this manually and I think it was through the 'Power Options' --> Advanced Settings --> Hard Disk --> Turn off hard disks after... Am I correct in this? That this is how I prevent my disk from going to sleep/turning off? by setting it at 0 or 999 minutes. Assuming not then how do I do so. Assuming yes, then is there a way to do so only for one HD? I have 4 (where my OS sits and 3 others). I do not like to wait every time I want to open a folder in a drive I am not presently using and since this drive mainly happens to be the D: drive and not my E: or F: drive (hardly used) I was hoping I could be specific.

Answer:Is it possible to change the power settings specific to 1 drive only

If any, such an option should be in the disk properties in Device Manager. But I don't see such an option.

9 more replies
Relevance 59.86%

cant change the settings in my toshiba power management section...can anyone help me out?

Answer:Can't change the settings in my Toshiba Power Management

Hi Matt

I want to help you but first of all it would be very interesting to know the detailed name of your unit.
Nevertheless if you have any problems with the power management on you unit I suggest to download the newest version from Toshiba website and to reinstall the Power Saver utility.

Bye

2 more replies
Relevance 59.86%

I have already clicked "Change settings that are currently available" but it still does not show it, restarted the PC and still same result.
MSE disabled
Windows 7 Starter 32-bit
Power Plan: High Performance
System Model: HP Mini 110-3500

Answer:Cannot see Multimedia Settings under "Change advanced power settings"

Please help.

6 more replies
Relevance 59.04%

After installing all updates from lenovo updater i have lost the ability to change the brightness under vista powerplan and lenovo power manager. I still can change display brightness with FN+home/end.Help please!here is a picture: http://img209.imageshack.us/my.php?image=24475922zk8.jpg





___________________________________________________________Lenovo Thinkpad T420s









Solved!

Go to Solution.

Answer:Cannot change display brightness under power plan settings

solved.needed to update the graphic card driver after installing vista sp1.





___________________________________________________________Lenovo Thinkpad T420s

1 more replies
Relevance 59.04%

My office computer has been set with preference power plan in domain environment, which put the machine to sleep in 1 hour. however I need to connect to the office computer with remote desktop, which means I need to keep this machine awake all the
time, how could I change the settings? as currently, whatever I changes the power option, it always go back to the customized power plan set by office.

More replies
Relevance 59.04%

Just curious if anyone knows of a quick way to change the power settings and/or screen saver without having to right click on desktop and choose properties. It's not that it's that hard to do it this way, but I was curious if there was some utility or batch file that could be created to quickly switch between settings.
 

Answer:Quickly Change Power Settings & Screen Saver

Bueller? Bueller? Anyone?
 

3 more replies
Relevance 57.81%

hi guys I hope you can help.

my pc has been running fine since I built it around 6 months ago and I always run on the full power mode in windows

thought I would change it today to balanced as the pc often sits idle a lot but when I try to change the power options to balanced it hangs with a bzzzzzzzz noise or it gets the windows exception screen and says collecting data..if I do manage to get it on balanced mode it always crashes about 10 seconds into windows when its loaded with the same error,if I can quickly get it back onto full power mode it crashes but then its fine when windows loads again.

any ideas?

More replies
Relevance 57.81%

how do i change my network location to its true location

see where my web sites on msn is?

Answer:change my network location to its true location

is there not a way to change this?

3 more replies
Relevance 57.81%

Geolocation, the retrieval of a connecting user's location in the world, can be beneficial to both user and website operator. When you connect o a weather website for instance, it is often the case that you want weather information for the location you are at.

It can also be comfortable to be redirected to a country-specific version of a website.

Sometimes however, geolocation can backfire. This can be the case if you want to look up weather information for another location, if you don't want to be redirected automatically, or if the location that the service discovers is incorrect.

Privacy is usually not part of the problem and the main reason for that is that browsers such as Firefox display prompts before websites may access your location. Then again, if you allow it you may dislike that it can pinpoint your location precisely.

Location Guard is a relative new extension for the Firefox web browser that can be configured individually for each domain you visit that wants to access location-based features.

It offers two main features: the first enables you to add noise to your location so that it cannot be pinpointed with accuracy anymore. The second feature on the other hand sets your location to any place in the world.

The preferences are automatically loaded after installation. Here you can select to increase or decrease the accuracy of the location sensor. At its least accurate level, its accuracy is 7116 meters which means that it will be up to 7116 met... Read more

More replies
Relevance 57.81%

Hello- I have looked everywhere for a solution to the location based printing problem. Having upgraded from Windows 8 Pro to Windows 10 pro some time ago, the ability to have my default printer automatically change based on the network I was on was available and the only reason I needed the Pro versions. Perfect for moving my laptop from home to work and not have to choose my printer each time. After the big cumulative Windows 10 upgrade, that feature went away to be replaced by something really useless- making your default printer the last printer used. Doesn't help me when I change locations. Does anyone have a solution or option for this? It seem like it would have been easy to keep that great feature. I hope I'm explaining this correctly but I have seen nothing on searches to address the problem. Thanks in advance.

More replies
Relevance 56.99%

I was wondering if any cunning WP enthusiasts knows if you can automatically open apps when you are at a specific location. Example-I want to open my wallet app when I arrive at a store. Any answers would be helpful!

More replies
Relevance 56.99%

just noticed that my location-based reminders FINALLY have a snooze button that allows me to dismiss the reminder for a period of time instead of the next time i'm at the same location. anyone else notice that yet?

Answer:Cortana Location-based Reminder

oops. i sent that thread w/o logging in. :)

2 more replies
Relevance 56.58%

Please Rob Me Demonstrates The Dangers Of Location Based Services
Location based services can be helpful to the user, no question about that. They are most often implemented and used in mobile devices who are able to return the location of the owner to the network where these information can get utilized in several ways from locating the nearest post office, restaurant or atm to locating a friend or object.
But these location based services can also pose a threat, especially if they are linked with social networking sites and public status information.

More replies
Relevance 56.58%

Hey guys,

Windows 7 had a feature where windows would select your default printer based on which network you are logged onto.

I cannot seem to find this feature in windows 10 for the life of me.

Has it been removed? I'm hoping it hasn't or there is at least some kind of registry hack to bring it back. What they seemed to have replaced this feature with "last printer used turns into default printer" is absolutely useless in my opinion. I can think of very few scenarios where that is actually helpful.

More replies
Relevance 56.58%

Hey guys,

Windows 7 had a feature where windows would select your default printer based on which network you are logged onto.

I cannot seem to find this feature in windows 10 for the life of me.

Has it been removed? I'm hoping it hasn't or there is at least some kind of registry hack to bring it back. What they seemed to have replaced this feature with "last printer used turns into default printer" is absolutely useless in my opinion. I can think of very few scenarios where that is actually helpful.

More replies
Relevance 55.76%

Hey all,
I have a problem with cortana and it's location based reminders: They won't work anymore since the anniversary update on Windows Mobile.
I guess I have tracked down the issue: If I look up in the position settings of Windows Mobile I see some options like "location service" and "location symbol" (I use a german phone, so the translation could be wrong) aand I see "location history" (Positionsverlauf). "If the location history is activated blahblah" but I do not have a slider to activate or deactivate it. Why this is important (i guess)?
Because if I scroll down to the apps which are allowed to use my location I see Cortana greyed out and right under it it says "The location history has to be activated to use Cortana" (Der Positionsverlauf muss zur Verwendung von Cortana aktivert sein.)
All other reminders work like a charm, only the location based reminders won't work. Has anyone an Idea how to fix that?
Here are some screenshots (unfortunately in german) that may help?
http:// n87t.imgup.net/wp_ss_20161f9f.jpg
http:// e78t.imgup.net/wp_ss_20169a0f.jpg
http:// d87t.imgup.net/wp_ss_20163531.jpg
Thanks in advance,
Spider!

More replies
Relevance 55.76%

I've got a print server and about 7 different depts with various printers.

I'd like when a user logs into a PC to auto map the correct printer by dept. My computers are named by the department they are in. For example a computer in accounting could be ACCT01, ACCT02 and so on.

My idea was using the login script.

IF %computername%==ACCT (install accounting printer)
IF %computername%==HR (install HR printer)

The problem is IF command compares the entire string. So ACCT01 returns a false value. I need to able to pull just the ACCT from the %computername% variable.

I'm open to anything!

Answer:Auto install printer based upon location / Dept

Kixtart did the trick. Works great.

1 more replies
Relevance 55.76%

Hey all,
I have a problem with cortana and it's location based reminders: They won't work anymore since the anniversary update on Windows Mobile.
I guess I have tracked down the issue: If I look up in the position settings of Windows Mobile I see some options like "location service" and "location symbol" (I use a german phone, so the translation could be wrong) aand I see "location history" (Positionsverlauf). "If the location history is activated blahblah" but I do not have a slider to activate or deactivate it. Why this is important (i guess)?
Because if I scroll down to the apps which are allowed to use my location I see Cortana greyed out and right under it it says "The location history has to be activated to use Cortana" (Der Positionsverlauf muss zur Verwendung von Cortana aktivert sein.)
All other reminders work like a charm, only the location based reminders won't work. Has anyone an Idea how to fix that?
Here are some screenshots (unfortunately in german) that may help?
http:// n87t.imgup.net/wp_ss_20161f9f.jpg
http:// e78t.imgup.net/wp_ss_20169a0f.jpg
http:// d87t.imgup.net/wp_ss_20163531.jpg
Thanks in advance,
Spider!

More replies
Relevance 55.76%

Is there a way to find the geographical location of a server based on IP address?

Obviously I don't need/want the town or county... not that it can be easily found out, anyhow. But, how about state? Country? Continent?

Thanks!
 

Answer:Is there a way to find the geographical location of a server based on IP address?

Try http://www.ip2location.com/
 

2 more replies
Relevance 55.35%

As above, if a user opens say a Word document which is an attachment on a web-based mail system like hotmail or outlook live and the user then just clicks SAVE, the document is saved to a temporary location.

We have lots of users who are doing this and then finding that they have lost there work etc as they have assumed it was saving to a network drive or even back to the attachment (yes I know thats wrong, but students don't always know till its too late).

So my question is, is there any way of getting Word to prompt them to save the document to somewhere when they click SAVE, rather than save it in a temp area under the temporary files area on the C: drive???

Is it possible to do with a Group Policy setting or any other way round not saving the doc in temp area and forcing the user to choose the location.

Maybe the equivalent to what the SAVE AS function does...

Hope that makes sense.

Answer:Opening attachments from Web-based Email are saved in Temp location...

which version of Word are you using?
Incidentally, here is how you fill out your system specs:
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

Add the word laptop or desktop or netbook to the
“system manufacturer” block, for example,
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

9 more replies
Relevance 54.53%

Hi everyone,

Scenario 1 (currently working): I wrote the below macro in order to change D4 and D5 to blank when the D3 selection (drop down selection) is changed. Since these cell are linked, when the D3 dropdown changes the users will be forced to make a new selection from D4 and D5.

Scenario 2 (what I would like to accomplish): Now I would like to make D5 become blank when the selection for D4 changes, but I am not able to make it do that.

Here is the code that is working right now for scenario 1:

Private Sub worksheet_change(ByVal Target As Range)
If Target.Address <> "$D$3" Then Exit Sub
Range("D4").ClearContents
Range("D5").ClearContents
Range("D14").ClearContents
Range("D15").ClearContents
End Sub
 

Answer:VBA: change cell to blank based on change to another

Hi mjkd,

Try something like

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$D$3" Then
'Exit Sub
Range("D4").ClearContents
Range("D5").ClearContents
Range("D14").ClearContents
Range("D15").ClearContents
ElseIf Target.Address = "$D$4" Then
Range("D5").ClearContents
End If
End Sub
 

5 more replies
Relevance 53.3%

Hey i used a vpn to change my location to canada from new york and now ive uninstalled the vpn but my location is still canda ,how can i change it back?
 

Answer:Used VPN to change location and now it wond change back

Closing dup. Please do not start multiple threads on the same topic.
 

1 more replies
Relevance 53.3%

I have a 240gb ssd and want to move my Downloads, Docs, Music ect.. to a bigger hard drive. When I access the files properties, then change location it changes them all to the same location? Any idea on how to move them without all files adjusting to same location?

More replies
Relevance 53.3%

Hey i used a vpn to change my location to canada from new york and now ive uninstalled the vpn but my location is still canada ,how can i change it back to my original location and ip
 

More replies
Relevance 50.84%

Hello All,
In preparation of installing Windows 10 Anniversary Edition, I would like to change my old MBR based PC to a GPT based PC. What is the best way to accomplish this? I am already done converting all of my drives to GPT except my C: drive, do I change that before, during or after installing the new edition of Windows 10? My system is based on:

Intel Haswell i5 4690
Asus motherboard, Z-97 A
Crucial 256 GB SSD

Any help would be appreciated.

More replies
Relevance 50.84%

Hello All,
In preparation of installing Windows 10 Anniversary Edition, I would like to change my old MBR based PC to a GPT based PC. What is the best way to accomplish this? I am already done converting all of my drives to GPT except my C: drive, do I change that before, during or after installing the new edition of Windows 10? My system is based on:

Intel Haswell i5 4690
Asus motherboard, Z-97 A
Crucial 256 GB SSD

Any help would be appreciated.

Answer:I Need To Change My MBR PC To GPT Based PC

It's been done before.
Here's the link that I posted on how it's done.
Solved Old Recovery partition - Windows 10 Forums
Or follow this Video:

2 more replies
Relevance 50.43%

I've disabled the application based dolby settings on my thinkpad t470p but it still keeps switching to the voice setting all the time. Anyone else have this problem?

More replies
Relevance 50.43%

Having uninstalled a faulty software I foolishly deleted the shared files which it said were not in use. The next 5 days were spent in safe mode, which I couldn't leave, despite several system restores, with a persistent error message that NAV Auto-protect could not initialise engine database files. Eventually, with the aid of Symantec support, all was restored to normal, and is now working, but 1. when I play spider solitaire the cards are only half the size, and 2. in Calendar a week now occupies only half the screen. It used to fill the screen. I am using Windows ME and MS Works Suite 2001. I have succeeded in restoring the desktop but not these. Somebody please help.Arrow.

Answer:location of settings

Navigate to the required program (via start/programs/games/spider solitar) and right click on it. Select Properties and on the shortcut tab select Normal Window, this hopefully will give you a full screen of the program.

4 more replies
Relevance 50.43%
Question: Location settings

Is there a way to control how my Nokia icon derives its location? When I'm at work our Wi-Fi reports my location over twenty miles from my actual location. I would like to set location from GPS only.

Answer:Location settings

In order to have more accurate data you may want to go to Settings -> Find my phone and select the 2 check boxes in order to control the frequency and protocol used.

2 more replies
Relevance 50.43%

Hi,

when I try to access certain websites, and try to buy somwthing or subscribe to services (such as UK soccer), The website automatically detects that I am in Australia, and says I cant access the content. What causes this and is there any way around it?

Pato
 

Answer:Location settings in IE6

Probably through your ISP. Is your ISP in AU?

sekirt
 

2 more replies
Relevance 50.02%

I posted in this forum as I feel this is security related. Mods move if need be.

I'm looking for a web based (preferably PHP) change log program. It should do the following:

1. Be simple!
2. Allow people to enter descriptions of basic system changes
3. Changes should have categories by systems and can be filtered as such.
4. Time stamp the actions and have a "master display" where all changes can be viewed
5. LDAP authentication would be nice.


Does such a thing exist? My goggling has failed due to "change log" being such a popular term.
 

Answer:Web Based Change Log Application

Bumpage. I could use something similar.
 

3 more replies
Relevance 50.02%

Hi, so I just got my new Yoga 910, and wanted to change the settings so the F keys are default and me not needing to press Fn. I found a lot of posts on the forum, where people got it working by having the latest BIOS and Lenovo Settings app from the store. I have the exact same installed, latest bios and settings app. But my input setting screen is just empty, it shows three loading spinners when loading the inputs setting page, but then just goes empty. See attached screenshot.    Anyone else experiencing this? I have updated Windows and all the drivers, also tried uninstalling the settings app and reinstalling, but that did not help either. Hope someone can help.. -- Christian


























lenovo-settings-input-empty.PNG ?31 KB

More replies
Relevance 50.02%

I have a number of workstations that I need to apply user registry keys to, has anybody ever done this before using group policies?
 

Answer:GPO: Applying User settings based on computer

so each user has a different GPO depending on the system they log into?
 

7 more replies
Relevance 50.02%

After a restart, Cortana always requests that I allow Location settings. I do that, and all is well, until the next restart, when the whole process needs to be repeated. It seems the location setting turn off by itself!!Please help

Answer:Cortana and Location settings

Have a look at the location settings and make sure they are turned ON. Further down the screen shown below you will find all the Apps listed that use Location and you can select whether or not you want Location allowed for that App.

3 more replies
Relevance 50.02%

I have a Thinkpad X1 Yoga with Windows 10 and the Lenovo Settings app disappeared / merged into Lenovo Companion app.  I can no longer find the Location Awareness settings that used to be in Lenovo Settings app.  I used it to automatically change the default printer based on my location.  It worked much better than having Windows 10 do it.  What happened to Location Awareness settings???

More replies
Relevance 49.61%

In Windows 7, all the good icons are in %SystemRoot%\system32\imageres.dll, but we're still taken to the old SHELL32.dll when it comes time to change an icon.

Is there a registry key or something that we can change to remedy this?

Answer:Change default location for "Change Icon..." button?

Anyone?

1 more replies
Relevance 49.61%

Hi guys, I've had this problem for around 4-5 monthes but have never really gotten around to looking for a solution. Anyways, here is part 1 of my dilema. Lenovo Settings will not open. In fact, it seems to have disappeared completely, along with several "default" apps, such as Paint and Calculator. However, I am able to see them, yet cannot open them directly. View From the Home Button. Oddly enough, I can still open paint, though I have to do so via right clicking on a picture. Clearly they exist, but whenever I click on them and attempt to open them directly, nothing happens. Another issue I have is that the lock screen is stuck on one picture. I cannot change this picture, instead, when I try to change it, the loading wheel spins indefinately like so. If there is any solution to either of these issues please contact me as soon as you can. As you can imagine it's a little bit annoying having battery saver mode stuck on so I can't charge more than 60% for road trips. EDIT: I should also note that this is a Y50-70 I am using

More replies
Relevance 49.61%

There is a software which often changes the proxy settings so I decided to config the internet settings registry right to reject the proxy settings. But When I decided to delete this software and return the rights back, I suddenly found that I can not change
the proxy settings manually!
The detail is that I change the auto proxy url, to let my pc use a pac file and I don't want any softwares to change. However, when I decided to give the rights back and try to change the url back, it never success, and even the same when i'm sure I have
cleared this url in the whole registry, but it back, as it never changes!
I check the registry rights twice or more to make sure that the rights has given back, just like it originally should be. But it never works.
So the result is I have to clear and reinstall the WINDOWS 10 AGAIN!
Never should you save such information both in registry and somewhere I don't know! Or you should let these stuffs out of the ** registry!

More replies
Relevance 49.61%

Basically I am trying to conditional format in Excel a cell -say A40 with text in it which should say "Net Profit" if the value in Cell D40 is greater than zero and the text in A40 should automatically change to "Net (Loss)" if the value in D40 changes to less than zero. Any help will be highly appreciated.

Answer:How to change text in a cell based on value i

First, some terminology...Conditional formatting is used to change the format of a cell when the specified condition(s) is(are) TRUE. Thus the name Conditional formatting.You are asking for the contents (not the format) of the cell to change based on the value in another cell.That is done with a basic IF function, which you can find in the Excel Help files.However, you left out a condition. You didn't tell us what you want to display if D40 equals 0 - assuming that that is possible.What should be displayed in A40 if D40 = 0?Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

5 more replies
Relevance 49.61%
Question: Change location

I would like to change the location setting of my system. The reason is that Windows 8 will assume the location of my provider which is some 100 kms away from where I live and I would like to set it to my actual location.
I know how to switch location on or off but not how to change the location.
Please advise.

Answer:Change location

This might be what you're looking for.....

Change the country or region setting

5 more replies
Relevance 49.61%

Hi All
Windows 8 map shows my location about 7 miles south of my location, anyone know how to change ?.
It's al new to me only got windows 8 Friday so still learning,
hope to hear from one soon.
Regards Keith

Answer:How do I change my Location in Map

Thank you will email you.
Regards Keith

3 more replies
Relevance 49.61%

I've been really annoyed with the regenerating Searches and Favorites folders that pop up under my user, and I saw that one potential fix of it was to click under Location and move it to somewhere else.

Well...I chose Temp. I figured hey, whenever the Favorites folder regenerates, it'll be under the Temp folder, and it'll just erase itself and whatnot. Except instead, it changed the Favorites folder to Temp under user. Now, it won't let me erase it, because it says there's stuff currently active.

So I make the mistake of moving the location of THAT to OS, and now, naturally, OS is under my user and can't be removed. On top of that, Favorites has just regenerated, so now I've got the same problem I had before, except on top of it, a duplicate OS folder is located under my username.

How do I fix this? The last thing I want to do is click on the duplicate OS and "restore default" so it sends OS stuff to the Favorites folder (if it would even allow that), especially because for some stupid reason, the Temp files are being sent there now.

I don't want to just "hide" the folder, because I have it so hidden folders are shown. I don't have a backup from yesterday to restore my computer. I don't want to restore my whole computer back to factory settings. Is there anything I can do to at least put this duplicate OS safely gone, with Temp being fully restored and not in the Favorites folder, even if it means I have to keep the stupid regenerating empty ... Read more

Answer:Can't Change Location

After manually selecting all the contents of the Favorites folder (which housed some, but not all, of the temp files), and deleting them, I was able to delete the Favorites folder, but I'm pretty sure that when it regenerates, it'll be the Temp files in there rather than the empty Favorites folder.

And the more pressing issue of the OS is still hanging there. There's no option to delete (not that I would try doing that anyway) and if I click the Properties > Location for it, and then "restore default", it says to send all OS files to C:\Users\(username)\Favorites.

Does anybody know how I can fix these problems? I'd REALLY appreciate the help!

16 more replies
Relevance 49.61%

Hi,

I live in the Uk and was wondering can you change your location so i can download win 8 apps from the usa app store as i would like to use iheart radio app. Is this possible? Thank you

Answer:How Do You Change Location?

Hello Andre,

The tutorial below can help show you how to change your region location in Windows 8.

Location - Change Region Home Location in Windows 8

Hope this helps,
Shawn

2 more replies
Relevance 49.61%

My location address needs to be changed how do I do this

Answer:How do I change my location on here?

do you mean Here maps? here map tracks your location info if you keep your location ON from settings. why do you want to change your location? it is displaying a incorrect location?

2 more replies
Relevance 49.2%

I have C660 and it is by far the most complicated laptop keyboard wise I ever had - on my previous one it was just F10 = quieter volume and F9= louder volume and on this one one has to press' FN' key + '3' or '4'.

Is there please some way to customize the key settings so I don't have to press FN key along with it, and make it be say F10 for volume instead please?

Answer:Re:Satellite C660 - How to change key settings to make volume change easier

http://www.autohotkey.com/

This program could help, however, I have not used it myself. It seems to be able to create new keyboard shortcuts using scripts

2 more replies
Relevance 49.2%

Hi guys,

If I open an Open File dialog box (like in Notepad or wherever) and it's set to display details, and I right-click the column header and check/uncheck some items in the popup menu (like Type, Data Modified, etc.) where do those settings get stored ? I thought maybe in the parent's desktop.ini but that doesn't seem to be the case.

Thank you.

More replies
Relevance 49.2%

Hey I foolishly changed my AIC location settings on my BIOS and now my computer will not display on a monitor. I have no idea the extent of the damage I have done as I can get no output.Does anyone have any idea how I can fix this? the computer has no OS (i was trying t get it to acknowledge the harddrive at the time).

Answer:AIC Location Settings/Bricked BIOS

What is the make and model of the computer?Have you tried doing a reset by removing the CMOS battery?http://www.computerhope.com/issues/ch000976.htmAfter about 30 seconds, put it back in and start the computer.You will need to fix the data and time.

1 more replies
Relevance 49.2%

I have an ongoing annoyance, which I've had through all Windows versions from XP or maybe Vista onwards, in that although I can individually set the volume level of each program that makes any sounds, all those volume settings are wiped out and reverted to the much unwanted default level every time the Realtek High Definition Audio driver is updated. So, I'm naturally wanting to backup the settings and then restore them each time they've got reverted to default.

So, could any nice person here tell me where those volume mixer settings are stored? -- Many thanks.

Answer:Location of volume mixer settings...?

Edit: I just found the utility in the link below. I think I may use it myself:
New utility to control the sound volume on Windows Vista/7/8/2008

End of Edit

================================

Perhaps someone knows. In the meantime an angle of attack could be take a snapshot of the Registry. Change the volume settings. Take another snapshot and see what changed.

regshot | Free System Administration software downloads at SourceForge.net

11 more replies
Relevance 49.2%

Hey I foolishly changed my AIC location settings on my BIOS and now my computer will not display on a monitor. I have no idea the extent of the damage I have done as I can get no output.Does anyone have any idea how I can fix this? the computer has no OS (i was trying t get it to acknowledge the harddrive at the time).

Answer:AIC Location Settings/Bricked BIOS

What is the make and model of the computer?Have you tried doing a reset by removing the CMOS battery?http://www.computerhope.com/issues/ch000976.htmAfter about 30 seconds, put it back in and start the computer.You will need to fix the data and time.

1 more replies
Relevance 49.2%

Dell Optiplex 980 SFF
Intel core 2 duo 660 3.3, 64bit
BIOS version A 16 (latest) and reset defaults.
W7 pro

I bought this Optiplex refurb on ebay and it works pretty good with 4 gigs of DDR3-12800 ram. After removing the old memory I installed 8gb Patriot Signature series (2x4)and it works better and shaved a few seconds off boot time. Now I need to set the timing but I cannot find the settings.

I've set the timing on other computers (mostly with Asus motherboards). I've searched the BIOS over and over and Googled everything I could think of but nobody ever mentions where the settings can be located. I've checked the Dell tech and user manuals until I have sensory overload but still no luck.

Since this was a business computer could they have eliminated the ability to tamper with the memory settings?

Anyway, if someone would be kind enough to just steer me in the right direction so I can ascertain if they actually exist I would be most appreciative.

Answer:Can't find Dell ram settings location

most oem computers such as dell, hp they do not let you change the ram timings usually the bios features are locked and not like asus, msi motherboards bios where you can change timings and stuff.

4 more replies
Relevance 49.2%

Using win7 64 bit 1 pc upstairs and laptop down stairs,no need for file or printer sharing so its disabled.
Is it right that the public location setting is the safest setting with the sharing option disabled,and that wpa etc is not used, i have seen the wording below which seems to suggest it.
note.
If you know you won?t need to share files or printers, the safest choice is public network.

Answer:Home wireless location settings?

This is recommended as it definitely removes the option to share files or printers thereby protecting you should you use your PC in a public place and forget to do this. If you want to give yourself the option of sharing files and printers you can choose private and then just disable file and printer sharing manually.
By not using WPA etc - do you mean because you have selected WEP? The level of security is yours - WPA/WPA2 recommended which gives you extra passworded protection.

7 more replies
Relevance 49.2%

For years, I have kept most of my data on a drive/partition other than C drive. Let's call this other data drive/partition, D drive.

With the frequent install of Windows 7 builds, I started changing the location of My Documents, My Pictures, and My Music to D drive as I've done for years, but I even went ahead and mapped the location of Desktop, Favorites, Searches, etc to the D drive as well.

The benefit of this is I didn't have to physically copy/move this data before doing a clean install, I just had to go in and change the default locations to the appropriate D drive paths/locations after a clean install. This is a bit of work and is tedious, but less work than moving data, etc.

I've had my kids computer dual-booting Windows XP & Windows 7 for months as well. In Windows 7, that computer has an account for me (admin purposes) and four more accounts for our four kids. Now, imagine the tedious work of manually changing the locations for My Documents, Desktop, etc in Windows 7 for all 5 accounts on that computer.

I would like to think that there is some way of backing up the location settings for My Documents, My Music, My Pictures, Desktop, etc for each account, maybe even backup the settings for the custom Start Menus, Desktop Wallpaper, and so on.

Has anyone seen a way of backing up these settings manually, using a 3rd party utility, or using some Microsoft admin tool?

Thanks in advance for the feedback.

Answer:How to backup My Documents/etc location settings

I know this might sound stupid as I may have misread you, but why don't you just have 4 folders with your kids name on them on your D drive and get them to use those folders instead of the my documents etc?

Anyway if you want it to not be so tedious, just add them to the librarys it'll only take you a second and you can just use libraries from then on.

5 more replies
Relevance 49.2%

Hello there

I just installed Win 10 upgrade from Windows 7 on my computer and I am having some problems to modify system settings regarding pen and touch, specially "Flicks" settings, that I need to disable to have a better performance using a Wacom tablet.

When I go to Pen and Touch>Flicks Windows says I can?t change settings since those are managed by the OS admin, but my profile has admin rights....

So, I decided to enable the Administrator account, to see if using it would fix the issue, but the Administrator account still shows the same problem, with the OS giving the same message.

I even went to settings to restore the PC to default to see if it was not some installation error, but the problem still persists, since even after restoring Windows with no apps installed the OS still gives me the same message.

I saw some people having issues related with that message when trying to change Windows Update settings, and they were able to use a workaround with group policy settings so they could do whatever they need with group policy editor, but I didn't find anything related to the Flick settings there, and even so, I prefer a solution that fix / allows me to make changes on settings, specially those related to pen and touch stuff, that are my really new trouble using Windows 10.

So anyone has any idea how to fix this or at least a way that I can disable everything in Flicks with gpedit ?

Tks

Answer:Cant change flicks settings (these settings are managed by admin)

crisorlandobr said:

Hello there

I just installed Win 10 upgrade from Windows 7 on my computer and I am having some problems to modify system settings regarding pen and touch, specially "Flicks" settings, that I need to disable to have a better performance using a Wacom tablet.

When I go to Pen and Touch>Flicks Windows says I can?t change settings since those are managed by the OS admin, but my profile has admin rights....

So, I decided to enable the Administrator account, to see if using it would fix the issue, but the Administrator account still shows the same problem, with the OS giving the same message.

I even went to settings to restore the PC to default to see if it was not some installation error, but the problem still persists, since even after restoring Windows with no apps installed the OS still gives me the same message.

I saw some people having issues related with that message when trying to change Windows Update settings, and they were able to use a workaround with group policy settings so they could do whatever they need with group policy editor, but I didn't find anything related to the Flick settings there, and even so, I prefer a solution that fix / allows me to make changes on settings, specially those related to pen and touch stuff, that are my really new trouble using Windows 10.

So anyone has any idea how to fix this or at least a way that I can disable everything in Flicks with gpedit ?

Tks




I am having this sa... Read more

1 more replies
Relevance 49.2%

Hello,
Is it possibly the Anniversary Update, which has blocked my possibilities to change the Lock Screen configuration? In Settings->Personalisation that whole option is greyed out today and I'm stuck with a lock screen, which I can't modify or change. Any help for this? Perhaps there is a registry change I could apply? I would be happy for any suggestion.

I've attached an image. My language is Swedish, but I guess that you will recognise the part of the Settings->Personalisation, which is shown.

Thanks in advance

Answer:Cannot use Settings->Personalisation to change Lock Screen settings

Hi tomcats!

You could have enterprise version with some options disabled, or you are connected to work (with account), which again could render some of the options unavailable..

6 more replies
Relevance 49.2%

Hello,
Is it possibly the Anniversary Update, which has blocked my possibilities to change the Lock Screen configuration? In Settings->Personalisation that whole option is greyed out today and I'm stuck with a lock screen, which I can't modify or change. Any help for this? Perhaps there is a registry change I could apply? I would be happy for any suggestion.

I've attached an image. My language is Swedish, but I guess that you will recognise the part of the Settings->Personalisation, which is shown.

Thanks in advance

More replies
Relevance 49.2%

Hi I have been seeing settings change on their own and cannot nail down the cause. The thing I noticed that is ongoing lately is that Internet Options gain custom settings for Trusted Sites and Local Intranet (I am not on a domain, do not connect to work or school, do not manage my computer remotely, do not send print orders from a phone, etc.)The system seems to run too many resources at times. And I get error messages that don't seem to match the environment (looks to me like an error from trying to connect to work etc)Here are my logs. In the next post I will add 2 extra and explain why. https://www.computerhope.com/cgi-bin/process.pl?o=1572815 says it can't understand my new update but there could be something wrong. "Detected potential protocol hijack" in a couple places and this would not surprise me. It also wouldn't surprise me if there were something with the way OneDrive is configured on my machine.It also says it's safe to remove lms.exe ; I always thought there was part of the Intel ME that I could take off and it would be ok, and if this is true I'll be happy to see it go. I'm not opposed to reinstalling Windows, but they don't give you reinstallation media any more with purchase, and I am not sure I can concentrate through the process without a lot of help.

Answer:Internet Options settings change on own--to custom settings

I guess I don't necessarily have to include more logs, just I thought some of the extensions shown in the logs (which don't actually show to me in the browser) seemed to not match up. And because there seems to be something wrong with my imageres.dll files. If it's just that the Windows 7 sector (no I don't know what that is doing; it was already Windows 10 when I bought it) doesn't work it's not an issue, but I've in the past had Restore and Factory Reset stop working, and if this is happening again I need to work out how to fix it. (and prevent it).

1 more replies
Relevance 49.2%

Hi, I want to assign a custom icon to every file type no matter what the associated app is. I can change individual default icons, but they get overwritten by the application icon. Is it possible to do this :

And if so, how ? (I want to keep the file associations: .css and .txt are still getting open by Sublime, .ini by WordPad and so on ...)

Thanks.

Answer:Change Icons based on extension only, not the associated application.

The following Microsoft Dev Centre page explains how this can be done via the Registry. (Note: I have not tested this myself in Windows 10)

https://msdn.microsoft.com/en-gb/lib...(v=vs.85).aspx

0 more replies
Relevance 49.2%

What is the best way to change cell colors based on a cell color (Not a number)?

I have a condition where a cell may have green background (conditional formatting), and on the next update, a different cell may have the green background (same condition, but not the same cell). I would like several cells in that column to change to the same color when this happens, they will be different rows, but will be on the same row as the change occurs ... it is dynamic.
*********
Condition 1:

G8 background color is = green

Change adjoining cells to the right and down to the same color
(H8:K8 and G9:K12) The inclusive range would be (G8:K12)
********
Condition 2 on update:

G8 is back to normal but H8 is now green

Cells in column G are back to normal but adjoing cells to the right and down should now be green.
(I8:K8 and H9:K12) The inclusive range would be H8:K12)
*******
Here is an example of the conditions above.

Condition 1
Row G H I J K
8 20 22 33 32 35
9
10 24% 15% 22% 21% 25%
11 80 82 90 88 89
12 44% 45% 48% 47% 50%

Condition 2
Row
8 22 33 32 35 38
9
10 15% 22% 21% 25% 27%
11 82 90 88 89 90
12 45% 48% 47% 50% 52%

The cells I want to highlight will not be of the same value and there are formulae in every cell.

Thanks
I haven't got the hang of copying the cells from Excel to the post. sorry about the formatting.
 

Answer:Change Range Cell Color Based on Another

In (nearly) simplest terms, and assuming from what you say that there'll NEVER be a time when G8 AND H8 are BOTH green, then

If Range("G8").Interior.ColorIndex = 10 Then
Range("G8:K12").Interior.ColorIndex = 10
ElseIf Range("H8").Interior.ColorIndex = 10 Then
Range("H8:K12").Interior.ColorIndex = 10
End If

You'll have to get back to us on what sheet event might fire this. & let us know if the actual cond formatting (a) blocks the code and/or (b) remains intact.

Rgds,
Andy
 

3 more replies
Relevance 49.2%

Hi, I want to assign a custom icon to every file type no matter what the associated app is. I can change individual default icons, but they get overwritten by the application icon. Is it possible to do this :

And if so, how ? (I want to keep the file associations: .css and .txt are still getting open by Sublime, .ini by WordPad and so on ...)

Thanks.

Answer:Change Icons based on extension only, not the associated application.

The following Microsoft Dev Centre page explains how this can be done via the Registry. (Note: I have not tested this myself in Windows 10)

https://msdn.microsoft.com/en-gb/lib...(v=vs.85).aspx

10 more replies
Relevance 49.2%

Hi I have two workbooks. The first one has a range of cells with months formatted as 'mmm'. On the second work book I reference the first workbook e.g =A1 and the month appears in the second workbook Call A1 as 40633 until I re-format that cell as a month. The tab name refelcts the same name (40633) but will not make any changes once I haver reformatted cell A1. I ahve tried formatting the cell forst before linking the two celss but it does not help at all.Is there any advice you can offer me?I am using the following code.Option ExplicitPrivate Sub Worksheet_Change(ByVal Target As Range)On Error Resume NextMe.Name = Me.Range("a1").ValueIf Err.Number <> 0 ThenMsgBox "cannot rename sheet to this name"Err.ClearEnd IfOn Error GoTo 0End SubMany thanks

Answer:Change name of sheet based on cell formula...

The formatting of a cell is not considered a "change" by VBA.Try something like:Me.Name = Month(Range("A1")) & "-" & Day(Range("A1")) & "-" & Year(Range("A1"))Edit:(Not tested)Tested briefly, seems to work.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

12 more replies
Relevance 49.2%

Hello,

I have written a bit of code and I am on the very last portion. I am attempting to re-create a manual process whereby the values on the 'Total' rows have to be A negative number for reconciliation. I am not sure what the best method is to accomplish this task.
Code:
Sub changetonegative()
Dim neg As Integer
neg = -1

lasttotal = Cells.Rows(Count, "a").End(xlUp).Row

For i = 1 To lasttotal

'Want to Multiply value in colum (b) of Total row to a negative number

If InStr(1, Range("c" & i), "Total") > 0 Then Range("b" & i).Formula =
End Sub

 

Answer:Solved: Change Value to A negative based on criteria

7 more replies
Relevance 49.2%

Hello
I am running win 7 and and I've noticed that the folder columns change based on the content of the folders. For example, when I'm looking at a folder with documents in it, I have the following columns:
Name
Date Modified
Type
Size

When I go into a folder with mp3s:
Name
Track number
Title
Contributing artists
Album

For pictures:
Name
size
type
date
date modified

I'd like to have all folders have the same columns no matter what files are in it. I've tried using Tools->folder options->view-> apply to folders button, but it does not fix the issue. Any way to change it for all folders?
Thanks

Answer:Folder columns change based on content

Hello Bandit, and welcome to Seven Forums.

This can help show you how to set a default folder view to be used in all folders in Windows 7.

Folder View - Set a Default for All Folders

Hope this helps,
Shawn

1 more replies
Relevance 49.2%

I need help please. I need to create a basic calender which shows the month on the top and when you click an arrow the month will change and a set of cells underneath will change. I intend to write into the cells details and when i click on the arrow to change the month the data will disappear. when I click on the arrow to go back a month, I will need this data to reappear. I would appreciate any help. I have created the arrows that change the month.

Answer:Need to change a set of cells based on the date (on excel)

Why not just create a new tab for each month and switch to the tab for the month you are interested in?Visually you would accomplish the same goal and you could go directly to any month you wanted.How have you created arrows to change months?Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

2 more replies
Relevance 49.2%

I really don't like the suggestions of the Explore menu because it's highlighting all the ****ty autotuned rappers that pretty much plague France right now... When I go to the music.microsoft.com website this is not an issue as the suggestions seems to be rather worldwide based instead of country based... Is there a way to force Groove to change its location?

More replies
Relevance 49.2%

Hello everyone
I have tried EVERY thread on here to change network location from public to home on Windows 10.
NOTHING has worked so far,
Most of the threads are for old builds.

How the hell do you change Network Location from public to private in Windows 10?

Have tried regedit, powershell etc.

HELP!

Answer:Network Location Change

Hello Mike, and welcome to Ten Forums.

If you haven't already, the tutorial below may be able to help for setting your network location.

Network Location - Set to Private or Public in Windows 10

10 more replies