Computer Support Forum

BSOD at random times, unkown cause, unsure what to post

Question: BSOD at random times, unkown cause, unsure what to post

I have been several BSOD errors in the past week. They are all different and vary quite a bit. I am unsure how record the exact errors, but I followed the instructions of the website leading me here and I have attached a zipped dmp file. I am running Windows 7 Home and I use AVG and Malware Bytes as well as HiJackThis for virus protection. I have used a fix-it untilities program to fix the registry and I have used the malware bytes rootkit finder as well. If there is any other information that would be helpful to you, please let me know and I will try and get it for you. Thank you for taking the time to look over this.

Relevance 100%
Preferred Solution: BSOD at random times, unkown cause, unsure what to post

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Answer: BSOD at random times, unkown cause, unsure what to post

Welcome to SevenForums.

Please upload all the files following Blue Screen of Death (BSOD) Posting Instructions

AVG is contributing to your BSOD's please remove it using its removal tool from here: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials, Free antivirus for windows.
Malwarebytes Anti-Malware Free
Good and Free system security combination




Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Perform a System File Check to check the integrity of all protected Windows 7 :Click on the start
Type CMD on Search
Left click and Run as Administrator
Type
Code:
SFC /scannow

Full tutorial here:SFC /Scannow Command - System File Checker
Disk Check on your hard drive for file system errors and bad sectors on it.How to run Disk Check on Windows 7
Make scans with the following:

-Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET
Number down items at start-up. Keep only your anti-virus, this also improves the time for logging into windows.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.RAM - Test with Memtest86+


Note
Pay close attention to part 3 of the tutorial in order to rule out the faulty stick.



Information
Errors are sometimes found after 8 passes.



Tip
Do this test overnight, before going to bed.

If Memtest86+ does not find any errors with ram run Windows Memory Diagnostics for 7-8 passes following its tutorial:Memory Diagnostics Tool
This tutorial USB Selective Suspend - Turn On or Off may help you:

To Disable Selective Suspend:open the control panel
go to power options (you may have to set view to small icons)
click change plan settings
in the window that opens:
click change plan settings
click change advanced power settings, expand usb and ensure usb selective suspend is disabled.
Let us know the results.

Following is for informational purposes only:

Code:
**************************Fri Feb 15 23:08:16.560 2013 (UTC + 6:00)**************************
Loading Dump File [C:\Users\Yusra\Downloads\SF_07-03-2013\SF_07-03-2013\021513-30576-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime: 0 days 3:04:30.011
Probably caused by : ntkrnlmp.exe ( nt!ExpScanGeneralLookasideList+a0 )
BugCheck A, {fffff8a001f68f18, 2, 0, fffff80002cbe2bb}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
Arguments:
Arg1: fffff8a001f68f18, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002cbe2bb, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_nt!ExpScanGeneralLookasideList+a0
??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Feb 16 15:09:31.748 2013 (UTC + 6:00)**************************
Loading Dump File [C:\Users\Yusra\Downloads\SF_07-03-2013\SF_07-03-2013\021613-41605-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime: 0 days 6:37:29.200
Probably caused by : ntkrnlmp.exe ( nt!ExpScanGeneralLookasideList+a0 )
BugCheck A, {fffff8a00248b4a8, 2, 0, fffff80002c742bb}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
Arguments:
Arg1: fffff8a00248b4a8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c742bb, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_nt!ExpScanGeneralLookasideList+a0

1 more replies
Relevance 95.53%

Today I got a new monitor, an LG 24MP56HQ-P. I plugged it in and made it my primary monitor (moving my original monitor, an LG Flatron W2361VG to the side as a secondary), and because I do not have a CD drive working (not enough SATA Power Cables to power it up, used my last one for my second HDD), I could not install the drivers for the monitor using the CD, instead I downloaded and installed, then restarted the PC; and since I have done this my screen has gone black twice with red horizontal lines (Only on the new monitor, the second would just go black) the first time, while the second time it happened I got BSOD. Now fast forward an hour or two, I'm just uploading music to my USB, and I get another BSOD. I have no clue what could be causing this. I have attached the requested files for posting in this subtopic.

Answer:BSOD during random times, unsure as to why

Your ATI driver has been flagged.


Code:
fffff880`0993b928 fffff880`0740afa4Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0xafa4
Download the 13.9 driver from here then use AMD Uninstall Utility to remove all traces of your current driver, CCC etc. Reboot and install the 13.9 driver.



   Note
When installing choose 'Advanced' or 'Custom' (whichever option is available, just not Express) and uncheck everything except the video driver.
Uninstall the following programs.


Code:
C:\\Program Files (x86)\\Cheat Engine 6.3
C:\\Program Files (x86)\\Razer\\Razer Game Booster
C:\\Program Files (x86)\\DAEMON Tools Lite
1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
3. Double click the executable to open it
4. Click the button shown below

If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.

5 more replies
Relevance 93.48%

I apologize for the poor title, i will try to give a better explanation of the issue.

Initially the issue started 3-4 months ago, at which time i was using Windows 7. Around the same time one of my 2 CPU fans stopped working but because my temperature wasn't going above 50 degree celsius i was hesitant to replace any part so i kind of just ignored the issue because every test i ran at the time came back as everything is fine and the only log i could find was Kernel-Power "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."; which doesn't tell me much because i was forced into manually restarting my pc. Around January of 2015, i upgraded the OS to Windows 8.1 but the issue persisted. A week ago my CPU fan died and i replaced it with the EVO Hyper 212 as well as installed a new SSD drive (samsung pro 850).

The issue is hard to explain because it isn't a BSOD with a message to contribute. The timing seems random and not linked to when the pc is under stress (gaming). Sometimes it can happen right after booting, other times it won't happen for hours and sometimes it can happen several times in a very short time period.

Now for the issue itself. I have two monitors, each monitor will pick a random color from the rgb scale and take on that color for the entire screen. Monitor one might be blue and monitor two might be pink, moving the mouse or using the keyboard ... Read more

Answer:BSOD at random times, at any time. Unsure of error.

Edit 1 8:36 PM EST April 2nd: Following EVGA's suggestions i ran Heaven Benchmark 4.0 and 3D Mark tests. I tried to upload the html file xps/pdf files but it gave me an error saying invalid file type. Any recommendations?

Edit 2 1:11 AM EST April 3rd: So the issue happened two more times today. There is no dump file that was created but the event view does have the following.
No mini dumps were created

2 more replies
Relevance 92.66%

Hi, been having this for a while now, I believe it is something to do with the memory, as it tends to do this when the computer is trying to do to much at once, however it does not happen when the graphics card is removed (original assumption) so unsure if that is part of the issue.

The debug file is attached, if any extra information is required please say so.

Answer:BSOD, at random times, suspected memory issue but unsure

Code:
fffff880`07367358 fffff880`04088accUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x29acc
What is aswsnx.sys ? | System Explorer

Hi NodrogJRB.

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD.

5 more replies
Relevance 84.46%

Hi All,

I've been dealing with BSOD's for a while and have never been able to find the cause. Sometimes the computer will BSOD and restart fine and run for a little while and BSOD again. Sometimes it will BSOD and then refuse to start, just power cycling before the BIOS screen even comes up.

To fix this I usually wait 24 hours or I've realized I can remove one stick of RAM and that also tends to fix it. I can add the RAM back later and it will work again for a while until the next BSOD.

Other times it will run for days no problem.

I also tried running verifier as instructed on this site and the computer would BSOD on boot for wdf01000.sys. The other BSOD s typically had an error regarding IRQ, but lately it's been different things I can't recall the new errors just that they're no longer IRQ.

I've tried testing the memory with Memtest so I think it could be the motherboard, but I'd like to confirm with some people who know more than me before I go through the whole hassle of RMA'ing it.

Attached is the required info for BSOD posts. Thanks for any help!

MEDIA-Mon_03_14_2016_205646_35.zip

Answer:BSOD Random Times Followed by Power Cycle before POST

A better suited forum for you = BSOD Help and Support - Windows 7 Help Forums
Why? the eightforums.com and sevenforums.com are forums that are specific for those Windows versions.

1 more replies
Relevance 84.46%

Hi All,

I've been dealing with BSOD's for a while and have never been able to find the cause. Sometimes the computer will BSOD and restart fine and run for a little while and BSOD again. Sometimes it will BSOD and then refuse to start, just power cycling before the BIOS screen even comes up.

To fix this I usually wait 24 hours or I've realized I can remove one stick of RAM and that also tends to fix it. I can add the RAM back later and it will work again for a while until the next BSOD.

Other times it will run for days no problem.

I also tried running verifier as instructed on this site and the computer would BSOD on boot for wdf01000.sys. The other BSOD s typically had an error regarding IRQ, but lately it's been different things I can't recall the new errors just that they're no longer IRQ.

I've tried testing the memory with Memtest so I think it could be the motherboard, but I'd like to confirm with some people who know more than me before I go through the whole hassle of RMA'ing it.

Attached is the required info for BSOD posts. Thanks for any help!

More replies
Relevance 75.03%

This has only been happening for the past few days and I haven't yet noticed any link between the times it's happened, so I don't have any idea what may be causing it. :[

I've attached both of the file options, so hopefully they'll be of use. Thank you so much in advance!

Answer:Occasional BSoD a few times per day, unsure of cause

MalwareBytes had been flagged.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, fffffa8007868db0, fffffa8007868dd0, 4020008}

*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsConstructIpHeaderForTransportPacket0+20a )

Followup: MachineOwner
Make sure it's updated. If the problem persists when MBAM is completely updated then uninstall it and test.


Code:
1: kd> lmvm mwac
start end module name
fffff880`0e07c000 fffff880`0e08e000 mwac T (no symbols)
Loaded symbol image file: mwac.sys
Image path: \??\C:\Windows\system32\drivers\mwac.sys
Image name: mwac.sys
Timestamp: Tue Mar 04 21:47:13 2014 (531649E1)
CheckSum: 00010A4A
ImageSize: 00012000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Uninstall DaemonTools, a known cause of BSODs.

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and ... Read more

2 more replies
Relevance 74.21%

Hi all, I know this is very ambiguous, but one of my Windows 7 computers at work, a Dell Optiplex 390, has repeatedly experienced BSOD crashes over the past year. This occurs when it is being used for web browsing, and when it is left on and not being actively used.

Examining the system log after crashes does not reveal anything. The BSOD shows up and goes away so quickly it's difficult to read....hence the dmp files are attached.

It would be greatly appreciated if someone can take a look at the dmp files and decipher what's going on. I've asked assistant tech support to look at the computer--originally it was thought there was some sort of network permissions issue (sometimes that would show up in the system logs), but of late that does not seem to be the case. However they have not been willing to look at the dmp files at present.

Thanks in advance!

Answer:BSOD randomly multiple times a day, unsure cause

Hi There,

The most recent dump files are from February, Just looking through the last few they all point to your graphics driver,


Code:
BugCheck 116, {fffffa80059c04e0, fffff8800487fd9c, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+12d9c )

Followup: MachineOwner
---------
Which is from April of 2009, That is prior to Windows 7 release,


Code:
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Fri Apr 24 03:51:57 2009 (49F199CD)
CheckSum: 004CC863
ImageSize: 00522000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There are a couple of newer ones here at Dell depending on which video card you have,

Product Support | Dell US

It's one of the two AMD drivers, try updating that.

These are 5 month old dumps and no other info being provided that's the best I can offer right now.

9 more replies
Relevance 70.93%

I only BSOD while having Dota 2 launched, usually after completing a game.

Here is the info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004DEE038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\121412-36114-01.dmp
C:\Users\Zack\AppData\Local\Temp\WER-65270-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt





If I am missing any other info I am sorry, please let me know! Thank you

Answer:BSOD while playing Dota 2, unsure of error #. See post inside

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8004dee038, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`031ee6f0 fffff800`0370bca9 : fffffa80`04dee010 fffffa80`039f9b50 00000000`00000014 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`031eec10 fffff800`035ec557 : fffffa80`04dee010 fffff800`036662d8 fffffa80`039f9b50 00000000`00000000 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`031eec40 fffff800`03553935 : fffff800`036c7ae0 00000000`00000001 fffffa80`04... Read more

3 more replies
Relevance 70.52%

Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty of air flow. I installed a Cool Mater Hyper Plus 212 heatsink. I followed the instructions, and looked at a few installation videos on my phone just to be sure. I'm pretty positive everything was done correctly including the thermal paste as my system has not gone over 45C while gaming even playing games on Ultra settings.

I got one BSOD late last night, after about 6 hours of it being on but no other problems after that. Today however I have been having BSOD issues the entire time at random times from just 5 minutes up to 2 and a half hours between BSODs. They have ranged from: NTSF_FILE_SYSTEM, PAGE_FAULT_IN_NONPAGED_AREA, KMODE_EXCEPTION_NOT_HANDLED, and SYSTEM_SERVICE_EXCEPTION

I have researched the errors on google all day and tried fixes for each one such as running memory diagnostic tool, deleting the old page info from memory and creating a new one, deleted all of my video drivers and reinstalled them, and I've even opened my case to make sure all my memory and cards are plugged in all the way.

These are the errors that BlueScreenView gave me:

120313-25490-01.dmp 12/3/2013 11:01:36 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff87f`f903edfb 00000000`00000008 ffff... Read more

Answer:Random BSOD problems in the past 2 days. Random errors at random times

Welcome to the Forum.

Please remove the software:

Code:
Start Menu\Programs\Advanced SystemCare 7 Public:Start Menu\Programs\Advanced SystemCare 7 Public
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer



Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a known cause to BSOD's. Please remove it and use Microsoft Security Essentials it is recommended from a strict BSOD perspective, compatibility... Read more

9 more replies
Relevance 70.11%

I keep blue screening at random times, not entirely sure why. The last hardware update i did was my graphics card, currently took the new one out and using the old one. My PC seems to be stable. Here are my logs, any help would be greatly appreciated thank you.

Answer:Random BSOD, unsure as to why

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff80000000011, memory referenced.

It looks like bad memory. I would run memtest86 over night for at least 8 passes. RAM - Test with Memtest86+

hmm. You also appear to have a problem with you registry. I'll ask an expert on this one. I would still test for memory though.

2 more replies
Relevance 70.11%

I've gotten 3 in the past two weeks not sure if it's my Graphics card overheating or what. but i'll do anything i can to help in resolving this.

my system specs are:
win8 x64
8GB ram
HD Radeon 7770 2gb
intel i5-2500k

Answer:Random BSoD unsure of causes

This device has issues and cannot start:





Programmable Root Enumerator ROOT\PROGRAMMING_SUPPORT\0001 This device is not working properly because Windows cannot load the drivers required for this device.



I don't have any idea what this device is. Try this:
- go to Start and type perfmon /report - save the report as an HTML file, then zip it up and upload it with your next post.
- then right click on this device in Device Manager, select "Uninstall" and then reboot the system to see if it comes back.

For starters, please follow the instructions here for troubleshooting these types of video errors: Video TDR Timeout - 0x116 + 0x117 - Sysnative Forums

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

LGBusEnum.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

LGVirHid.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

IOMap64.sys Thu Feb 4 20:55:34 2010 (4B6B7A96)
ASUS Kernel Mode Driver ?Asus Smart Doctor/iTracker 2
http://www.carrona.org/drivers/driver.php?id=IOMap64.sys

SCDEmu.SYS ... Read more

1 more replies
Relevance 69.7%

This is my custom build computer of 4 - 5 years. The past year or so i keep getting random BSOD. There are times right after i do a windows update, the very next day my computer will crash. I am running the latest nvidia drivers, and also run windows update. Some times the error says Memory Management, or ntfs.sys, fltmgr.sys. I did a memory test and it passes. I also tested hdd for errors. I really can not take getting all of these BSOD. Right now, it is happening about 3 times per week. At times i am using my computer and other times it is at night when it is locked. I have not added anything to my computer since it was born 4 - 5 years ago. I also do not overclock or mod anything.

Any help will be appreciated.

Thanks

edit
Forgot to add that sometimes when my computer BSOD, i am not getting the log dump files.

Answer:BSOD at random times, at least 3 times per week. Win 7 64 Ultimate

another BSOD

9 more replies
Relevance 69.7%

Hello,
New member here and thanks in advance for looking.

I have a home built w7 Home Premium box we use almost exclusively for Windows Media Center. I started getting bsod's about a month ago and before that got distorted *pinkish* video on restart or bootup at times.

Tried using msconfig and changed settings and thought I had it but it resumed the pink screens (sometimes garbled colors i.e. squares and other shapes) so I bought a new video PCIe card, an XFX R6700. Thought this had it but it resumed the bsod's and sometimes graphic issues.

Saved our pics and such and did a clean install.
Worked fine for a couple days then back to the bsod's and pink graphics.

Having a hard time getting the crash files together for upload, new guy here so hopefully I'll get it figured out and add it. The directory created by SF_Diag is 34.1mb large and when I go to U/L size limits say nope. Pointers here maybe.

Thanks,
behoof

They say, "If mama ain't happy, ain't nobody happy!" and this W7 box is for her TV <sigh> Help!

Answer:BSoD at random times and pink graphics at times,

Hi please follow this : BSOD posting instrucs: http://www.sevenforums.com/crashes-d...tructions.html
So someone can assist you, possibly me even.

9 more replies
Relevance 68.47%

Hi everyone, and THANK YOU just for having these forums, let alone for helping me with this issue.

Let me start from the beginning. I was running XP on my old box. It was too slow, so I bought a new mobo, cpu, and memory. Oh, and a SATA optical drive since the new mobo wouldn't take an IDE. I downloaded a clean copy of Win7 Pro from Digital River, and installed on my hard drive. Then activated it with a key I purchased.

There seems to be no rhyme or reason to when the BSOD hits. Browsing the Internet, not browsing. Streaming music, not streaming music. Usually it's just sitting there. I am not even using it.

Things I have done:

Memtest - Checks clean
Chkdsk - Checks clean
Restore to earlier time - no effect
Updated the BIOS - no effect

I am hoping that the SWEET SFtool will help you guys help me.

Answer:Random BSOD then restart, believe it to be hardware but unsure

Welcome to SevenForums,

What antivirus are you using?






Quote:
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)



Code:
1. *******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d89b941859, b3b7465eee10e7af, fffff80002f5b0f0, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bug... Read more

9 more replies
Relevance 68.47%

This computer was heavily infested with viruses and such. System should be repaired and back to normal, but while doing any type of scans/defrag and such, system will randomly blue screen. All hardware tests pass, and it will run fine in PE or Safe Mode so it appears to be a driver (I'm assuming) Any advice?

Answer:BSOD RQL_NOT_LESS_OR_EQUAL - ntoskrnl.exe Unsure of cause and Random

Hi justindp2006.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.17118.amd64fre.win7_gdr.120830-0334
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Update Realtek RTL8191SE Wireless LAN driver from Realtek

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Let us know the results.
_____________________________________________________________________________

Code:
BugCheck 1E, {ffffffffc0000005, fffff80002c5467b, 0, 7efa0000}

Probably caused by : ntkrnlmp.exe ( nt!RtlImageNtHeaderEx+3f )

Followup: MachineOwner
---------
BugCheck A, {5000000dd, 2, 1, fffff80002ca1ef5}

Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )

Followup: MachineOwner
---------
BugCheck A, {dc, 2, 1, fffff80002c63ef5}

Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )

Followup: MachineOwner
---------

4 more replies
Relevance 68.47%

Hey all. I have been getting BSODs everyday for a couple months now. At first, since the BSODs started at around the same time as I received my new motherboard and cpu (MSI PC Mate Z97 + Intel i5-4690K), I thought the BSODs were caused by this new hardware, but I am not certain as I updated drivers around the time too. At the moment the BSODs could be caused by anything.
I have:
 
 
Ran memtest overnight with a successful pass.
 
 

Changed power settings to high.
 
 

Installed latest intel chipset drivers from intel's auto updater.
 
 

Installed latest BIOS.
 
 

Installed as many additional drivers from my motherboard's webpage.
 
 

Uninstalled graphics drivers (for my AMD HD 7870 GHz edition) and reinstalled.
 
 

Completely reinstalled windows by formatting by HDD and installing a fresh copy of windows on to that.
 
 

My PC specs are as follows:
 
 
MSI PC Mate Z97
 
 

Intel Core i5-4690K
 
 

AMD Radeon HD 7870 Ghz Edition
 
 

16gb (4x4) of Patriot Viper 3 DDR3
 
 

Seagate Barracuda 1TB 3.5" 7200RPM
 
Antec TP-650C

 
I could not attach the additional required file due to the task never completing in the application.
Thanks in advance!
 
 
Here are thew last 5 .dmp files if you need them:
https://drive.google.com/folderview?id=0BzgSuwGhlWk4NUcwZW1id1Vlc1U&usp=sharing
 
In .zip file:
https://drive.google.co... Read more

More replies
Relevance 68.47%

Hi guys,

I keep on getting BSOD screens when using my laptop. It is very random, sometimes it happens whilst I am working in Adobe Photoshop or Illustrator or even just when I am browsing the web. At first I thought it might be the display driver, but I did a clean install of that and it is still happening. But I do believe it is driver related.

I am not really too clued up with BSOD it says something like netio.sys and system_service_exception, so if anyone could view my uploaded file and assist me that would be really appreciated.

Thanks a lot,
Ruan

Answer:BSOD at very random times, no specific times.

There appears to be a program installed that may be causing problems with your network connectivity and may be contributing to the BSOD with the netio.sys.

That program is the NVIDIA Network Access Manager program.

2 more replies
Relevance 68.47%

I have been getting BSOD's for the last week or so. I can't read the entire screen in time when it happens but I do catch something about a hardware issue. This has happened several times while playing video games, but others when surfing the web, or just doing some typing. I've checked all of the components and they seem to be functional to the best of my knowledge.

I was getting random lock ups as well, where the entire system would freeze up, I would lose control of everything. This happened a few times when watching movies or games, and the sound would continue on as if there was nothing wrong while everything else froze and would not respond. I reinstalled windows and none of these lock ups have happened since, and I went 2 days without the BSOD but it has come back today.

The computer is as follows with a Windows 7 Ultimate 64 bit OS

Intel 980 Extreme 6 core CPU
12 GB DDR3 Ram
2 64GB Kingston SSD
1 2 TB SATA Drive
Nividia 430 GPU

I've attached the mindump file and the system report file as per the instructions and would appreciate any help on this matter. While I am by no means a computer guru or expert, I've tested everything I could and found no viruses or lack of important drivers that could cause this. I also stress tested my GPU and CPU to make sure they were not overheating, though I didnt think they were. Under full load the GPU peaked at 81C with an average running temp of 40C and the GPU was 74C at peak and 37C at standard operation level.

Thank yo... Read more

Answer:BSOD at random times, other times just lock up

Problem Devices:
Code:
Ethernet Controller PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_06\4&525529E&0&00E4 The drivers for this device are not installed.
Universal Serial Bus (USB) Controller PCI\VEN_1033&DEV_0194&SUBSYS_50071458&REV_03\4&115A8633&0&0010 The drivers for this device are not installed.
Ethernet Controller PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_06\4&2E680ECD&0&00E5 The drivers for this device are not installed.
Make sure the above are installed. You should be able to find the drivers from your motherboard support site or your system vendor's support site (through HP, Dell, etc.).
Update your Intel IDE ATA/ATAPI controllers device. To determine the device, you can find it in Device Manager. To fully re-install a driver, use the following steps.First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest... Read more

9 more replies
Relevance 68.47%

Hi, I have started getting BSODs twice a day at random moments on my computer in the last 4 days. I've tried to figure out the reason for the BSODs but I'm not sure.

I often get the * Hardware failure * bsod. Now I know these can be caused by a number of things, so that is why I included with this post the SF Diagnostic Tool zip attachement so you can help me figure this out.

I consider my knowledge of computers (overclocking, hardware maintenance and debugging) at a decent level, so it shouldn't take much help before we fix this. I just need someone to point me in the right direction.

Answer:BSOD at random times, 2 times/day in the last 4 days

Hi jonathan

1. The attached system logs are only till 1 July 2012... appreciate if you can save the log directly from event viewer and post it here.

2. Holy crap!!.... I know you have a decent enough system with 8 GB Ram....but this is insane...... Please disable the all that crap from startup


Code:
V0710Mon.exe REG_SZ C:\Windows\V0710Mon.exe
Adobe ARM REG_SZ "C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe"
AMD AVT REG_SZ Cmd.exe /c start "AMD Accelerated Video Transcoding device initialization" /min "C:\Program Files (x86)\AMD AVT\bin\kdbsync.exe" aml
avast REG_SZ "C:\Program Files\AVAST Software\Avast\avastUI.exe" /nogui
BDRegion REG_SZ C:\Program Files (x86)\Cyberlink\Shared Files\brs.exe
ChallengerPro REG_SZ "C:\Program Files (x86)\Thermaltake Challenger Pro\Ttsystray.exe"
CLMLServer REG_SZ "D:\Programmes Jo\CYBERLINK\Power2Go\CLMLSvc.exe"
HP Software Update REG_SZ C:\Program Files (x86)\Hp\HP Software Update\HPWuSchd2.exe
PDVD8LanguageShortcut REG_SZ "D:\Programmes Jo\CYBERLINK\PowerDVD8\Language\Language.exe"
PMBVolumeWatcher REG_SZ D:\Programmes Jo\Sony\PMB\PMBVolumeWatcher.exe
QuickTime Task REG_SZ "D:\Programmes Jo\Quicktime\QTTask.exe" -atboottime
RemoteControl8 REG_SZ "D:\Programmes Jo\CYBERLINK\PowerDVD8\PDVD8Serv.exe"
Rocket... Read more

9 more replies
Relevance 68.47%

Hey all. I have been getting BSODs everyday for a couple months now. At first, since the BSODs started at around the same time as I received my new motherboard and cpu (MSI PC Mate Z97 + Intel i5-4690K), I thought the BSODs were caused by this new hardware, but I am not certain as I updated drivers around the time too. At the moment the BSODs could be caused by anything.
I have:Ran memtest overnight with a successful pass.
Changed power settings to high.
Installed latest intel chipset drivers from intel's auto updater.
Installed latest BIOS.
Installed as many additional drivers from my motherboard's webpage.
Uninstalled graphics drivers (for my AMD HD 7870 GHz edition) and reinstalled.
Completely reinstalled windows by formatting by HDD and installing a fresh copy of windows on to that.

My PC specs are as follows:MSI PC Mate Z97
Intel Core i5-4690K
AMD Radeon HD 7870 Ghz Edition
16gb (4x4) of Patriot Viper 3 DDR3
Seagate Barracuda 1TB 3.5" 7200RPM
Antec TP-650C

Here are thew last 5 .dmp files but as mentioned earlier the errors seem to always be different:
https://drive.google.com/folderview?...1U&usp=sharing

In .zip file:
https://drive.google.com/open?id=0Bz...DNKazI5a0R1UlE

Thanks in advance!

Answer:BSOD at random times 2-3 times per day with different errors

BSOD Posting Instructions & How to upload files

4 more replies
Relevance 68.06%

Hi

I'm currently running Windows XP Home Edition with Service Pack 3.

Currently using firefox 3.5.5. On random occasions ,random pages will randomly not load with the loading circle spinning but nothing happening. When I click refresh, the page might load or might not. Sometimes i have to end up closing the browser and that seems to fix the problem for some time. The problem will randomly occur again shortly after.

For Msn, i have version Windows live Messenger 2009. On random occasions, i will not receive or my messages will not be sent out. The problem will go away and come back consistently.

I have shaw high speed internet directly connected to the modem. I tried calling them and letting them take a look into my computer through the internet. When they were searching theought, the problem did not occur at that moment, therefor i couldn't not prove that i have a problem.

I tried scanning my computer with Avira AntiVir Personal- Free version and Malwarebytes' Anit-Malware Free version all uptodate, but nothing gets picked up.

This problem started to occur 2-3 weeks ago, and i could not occur what i did during that time.

Thanks for your time.

Answer:Unable to access random pages and random times/Msn not receiving or sending msges at random times

o.o

1 more replies
Relevance 67.65%

My computer keeps restarting at ramdom time during the day. If I play a movie using vlc that restarts it every time. I tried running Linux to see if it was a windows problem and still happend. Tried running memtest and it goes into a infinite restart loop after 15 sec in memtest. I swapped out ram and still the same problem. I'm thinking it's most either video card or motherboard. Another random problem I get is sometime when I turn the computer on I get no display and have to keep resetting it. I unhooked everything and cleaned out dust and re applied heat sink. I have no more idea what to try. Here is a error report from event viewer


The following boot-start or system-start driver(s) failed to load:
nSaPsYMb

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7026</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-07-10T05:44:29.514452300Z" />
<EventRecordID>54036</EventRecordID>
<Correlation />
<Execution ProcessID="512" ThreadID="516" />
<... Read more

Answer:Computer keeps restarting at random times. Event viewer report in post

Forgot to add that sometimes it gives me bsod the other half just restarts with no blue screen

1 more replies
Relevance 67.24%

I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into windows in 8-10 seconds (SSD) but the latest post-BSOD boot took about five minutes from typing my password into the login screen to where my desktop popped up. A subsequent reboot was at normal speed. The memory dumps always include the NT OS kernel, but then also some other driver (different each time), which I suspect just happens to be the one trying to run at the time of the error.

Things I've tested:
Temperatures (didn't really suspect them in the first place, but I'm running cool)
Memory (Both the native Windows test and memtest found no issues)
Hard drives (chkdsk came back clean)

All drivers are up to date, although the uploaded report might show an older version of my sound card driver, as I just reinstalled it at the behest of windows action center (which didn't make the notification go away, mind).

I'm hoping someone wiser than I can make sense of this, because it all seems so random to me. Thanks in advance to whoever that is.

Answer:BSOD at seemingly random times, memory dump blaming random drivers

How many passes did you take memtest for?

Code:
Debug session time: Mon Apr 14 14:39:57.702 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 3:33:21.985
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BugCheck 1A, {41790, fffffa800b8e2ca0, ffff, 0}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800b8e2ca0
Arg3: 000000000000ffff
Arg4: 0000000000000000
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: AvastSvc.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
BiosVersion = 2201
BiosReleaseDate = 11/22/2013
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Apr 10 10:21:01.348 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 8:53:05.394
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+27e08 )
BugCheck 1A, {31, fffffa800f46b160, fff... Read more

1 more replies
Relevance 66.83%

I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are:

Driver IRQL not less or Equal
System Service Exception

and these two I just got before I decided to post:
Interrupt Exception Not Handled
No More IRP Stack Locations

I recently took this desktop back from my brother. I bought a new harddrive and installed a fresh Windows 7 x64 Home Prem. on it. I have two other HDD's connected too, a 1TB and a 500gb. I built this originally (and I had no problems when I built it) back in 09. System Specs are included. I replaced the RAM too. I know it isn't on the Approved List for my mobo, but nothing on the mobo lists 8GB and I'd like to use 8GB.

My parts are:

Asus P5P43TD Mobo
Core 2 Duo 8400 Wolfdale
(2x4gb GSKILL F3-12800CL9D-8GBRL)
XFX Radeon HD4890 (but i hadn't noticed, but radeon now only sets out drivers for the entire series, 4XXX, etc.)
Sunbeam (Ithink) 780w psu

I'm not in the market to buy a new performance pc (although the parts I have my eye on are roughly 1400)

Please lmk what you think I should do.

Answer:BSOD doing random things (Google Chrome, minecraft, random times)

I see some memory corruption in the dumps. Can you follow this tutorial: RAM - Test with Memtest86+

Report back after the tests

Thanks Ant

3 more replies
Relevance 66.42%

My microphone, as of last night, as started producing a "buzzing" noise to its listeners. I can't hear it unless I go into recording devices and click "listen to this device". It's a constant buzz, as long as my mic is enabled (I do a lot of push-to-talk in video games). I've tried another headset with the same result. I updated my video card (GTX 960) with no change. Restarted the computer of course, as well. Just trying to see how to diagnose the exact issue before I go buying a new computer case or something. Thanks in advance.
 

More replies
Relevance 66.01%

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x000000... Read more

Answer:Random BSOD's at random times often error 0x0000001E

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.


Code:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: avguard.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus


Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
avnetflt+0x7000
fffff880`069f29d8 fffff880`069f2c88
fffff880`069f29e0 fffff880`069f2c00
fffff880`069f29e8 fffffa80`120aa388
fffff880`069f29f0 fffffa80`1209ba10
fffff880`069f29f8 00000000`00000001
fffff880`069f2a00 fffffa80`120aa350
fffff880`069f2a08 fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download


Code:
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED

Code:
lmvm atikmdag
start end module name
fffff880`11088000 fffff880`11f98000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmd... Read more

9 more replies
Relevance 66.01%

Hello , im having random BSOD issues and after a BSOD i can use my PC again but the problem is it keeps happening randomly and i will be able to use again
Here are some of the errors i have got:
PAGE FAULT IN NON PAGED AREA
BAD or CORRUPTED POOL
MEMORY MANAGMENT
I have the files Windows_NT6_BSOD_jcgriff2 and perfmon files included in this post
System specs
Os: Windows 7 home premium 64 bit
I have bought this about a week ago , i had it built.
Proccesor : AMD FX 6100 Proccesor
gpu :nvidia gtx 560
ram: 8gb
hard drive : 1tb

Answer:Random BSOD errors happening at random times

Hello, welcome to SevenForums!

I have taken a look at your provided dump files. There are tons of memory management and memory corruption errors. Before we continue, if any of your hardware is overclocked, PLEASE reset your clocks to stock for diagnostic purposes.

First off, before we continue onto memory.... in your drivers list I noticed you have sptd.sys listed, which is the driver for Daemon Tools. Please uninstall Daemon Tools from your system as it's known to cause many issues in the Windows 7 environment. Once you've done so, restart and then run DuplexSecure's sptd uninstaller to fully remove sptd.sys from your system. After you've done so, restart again.

Next, tons and tons of memory management and memory corruption errors as I've said earlier. Please read the following thread to download and install Memtest to test your memory for any bad sticks.

9 more replies
Relevance 66.01%

Hi All,

First time poster and hope somebody can help.

Have been getting BSOD for a few days now. All at random times, while using the internet, watching movies or just playing music.

Have even formatted but of no use.

Most recent BSOD was MEMORY MANAGEMENT but its different all the time.

Answer:Random BSOD messages, happens at random times while using computer

Welcome.

Could you configure the system to collect small memory dumps.Dump Files - Configure Windows to Create on BSOD

1 more replies
Relevance 66.01%

Happens almost daily. Some days I can be using the computer heavily for 12 hours without an issue. Other days it'll crash within 10 minutes. After replacing hardware, mobo, gpu, and hdd, still having the issue, only I'm actually getting a BSOD now. Prior to this I wasn't even getting a BSOD, just a freeze with the sound skipping a bunch and a frozen desktop. Only way to fix it was to force a shutdown.

sfc /scannow shows no issues. ChkDsk is fine. I'm just about to use Driver Verifier. Other than that I don't know where to go from here.

SPARKYDESKTOP-Sat_08_29_2015_150539_55.zip

Memory.DMP says it's possibly from memory_corruption. I've run memtest for 24 hours with no issues. Here's the analysis from WinDbg:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800937c8e80, Address of the instruction which caused the bugcheck
Arg3: ffffd001b0ef3fa0, Address of the context record for the exception that caused the bugcheck
Arg4: 00000000000000... Read more

Answer:BSOD - Random times with random activity levels

Hi sparkybear,

Welcome to the 8forums.

Please update CPU-Z

Code:
4: kd> lmvm cpuz137_x64start end module name
fffff801`f061c000 fffff801`f0625000 cpuz137_x64 T (no symbols)
Loaded symbol image file: cpuz137_x64.sys
Image path: \??\C:\Users\RYANRI~1\AppData\Local\Temp\cpuz137\cpuz137_x64.sys
Image name: cpuz137_x64.sys
Timestamp: Mon Feb 17 15:22:16 2014 (53021B18)
CheckSum: 000145F6
ImageSize: 00009000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPD pass through remover.
Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


Diagnostics

MEMTEST86+

Please Run Memtest86+

   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, e... Read more

2 more replies
Relevance 66.01%

My PC keeps crashing and i have no idea why.

Answer:BSOD at random times caused by random drivers

Dont use a BETA display driver.

Uninstall the installed display driver using DDU. Then install the CCC 14.4 WHQL only.

Also Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know for any further BSOD after doing these two.
_______________________________________

Code:
fffff880`0786c6d8 fffff880`03ed7eccUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x4fecc

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff880110ec200, fffff88004053258, fffff88004052ab0}

Probably caused by : atikmdag.sys ( atikmdag+10200 )

Followup: MachineOwner
---------

9 more replies
Relevance 66.01%

Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran

Answer:Daily BSOD random times random Apps

  
Quote: Originally Posted by bskaggs


Hello all I have a Dell Latitude e6530 With win 7 pro 4 gig of ram

I have updated the Video driver to the latest yet I still get a BSOD pointing at dxgmms1.sys

Here is the Zip file for the test ran


Hi bskaggs,

Welcome to Seven forums.

Here are you bugcheck details:






Quote:
YMBOL_NAME: dxgmms1!VidSchDdiNotifyInterruptWorker+b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME: dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5164dc13

FAILURE_BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b

BUCKET_ID: X64_0x7f_8_dxgmms1!VidSchDdiNotifyInterruptWorker+b


Update your video driver from here and not from the Windows Update:

Drivers & Downloads | Dell US

Also, perform a clean startup to ensure no conflicts with the background programs:

Troubleshoot Application Conflicts by Performing a Clean Startup

Keep us posted with the results so we can advise you further.

1 more replies
Relevance 66.01%

Hey everyone, Im new here on this forum.

I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly.

What happenes is that everything becomes unresponsive; cant alt+tab, cant ctrl+alt+del etc etc. everything freezes randomly... then boom, BSOD. its happened twice, with no apparent pattern.

And then, when it restarts, it tries booting but then it goes into the boot selection screen and my SSD is nowhere to be found. I have to power off then power on again for it to boot up and log in.
- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2012-02-26T23:15:40.693210900Z

EventRecordID 6298

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Jason-PC

- Security

[ UserID] S-1-5-18


+ EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

I've attached my BSOD info along with my Heath report.

if anyone could help please let me know.

Windows 7 Home Premium 64x
System hardware age: from 3 years to a few months.
OS age: just recentl... Read more

Answer:Random BSOD during Random times, error 0x8000000000000002

No DMPS in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

8 more replies
Relevance 66.01%

Hi. I get a BSOD on my computer at most, twice a day. I am not sure what causes it as it happens at random times in the day.
I have attached the SF Diagnostic File if that helps.
Thanks,
Kieran

Answer:BSOD. 2 or 3 times a day at Random times.

Welcome to the forum.

Kaspersky contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-


Code:
AODDriver2.sys Thu Apr 5 15:23:37 2012 (4F7D6499)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
Driver Reference Table - AODDriver2.sys


Code:
ser2pl64.sys Thu Oct 17 17:02:48 2013 (525FC3D8)
USB-to-Serial Cable Driver/GembirdUAS112
Driver Reference Table - ser2pl64.sys






Quote:
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Perform a clean install of a driver following: How to Clean... Read more

1 more replies
Relevance 64.78%

My system has been extremely unstable since the last Windows updates about a week ago. Kaspersky Internet Security stops and restarts. Firefox, Outlook, World of Warcraft,etc crashing frequently. BSOD several times a day. I come to my desk and the logon screen is often there indicating the system crashed and rebooted while I was out.

This is very atypical for my system. I often go weeks without rebooting or having any program crash. I have noticed two error messages in the BSOD. One was memory management and the other was bad pool header. I suspect there have been others, but I'm not present every time Windows crashes.

Win7 Pro 64bit retail original OS on this system. I built this system about 6 months ago and it's been running very well until a week or so ago. Suggestions gratefully accepted.

Answer:BSOD at random times doing random things

One of the memory dumps in the WER section of MSINFO32 blames Kaspersky (as do 2 of the 9 memory dumps). Please do the following:





Quote:
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the antivirus software from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of the antivirus software using one of these free tools: Antivirus Uninstallers
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's
NOTE: NEVER run more than 1 anti-virus, firewall, Internet Security/Security Center application at the same time.


Older versions of Acronis are known to cause BSOD's on Win7 systems also. Your copy has drivers that date from 2007. As such you MUST uninstall it.

In the table below is a list of drivers. Please update or remove the programs associated with any drivers dated from 2009 or earlier. Below the table is a list of links to more information about the drivers (it'll help you find out what programs belong to the drivers in question).

If all of that doesn't fix it, then please run Driver Verifier according to these instructions: Driver Verifier Settings

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (... Read more

4 more replies
Relevance 64.78%

Hi,
I am getting BSODs at random times, while doing different things each time. Been getting them for 5 days trying to narrow down what could be causing it. Searching lead me here. I did the posting instructions. Also did sfc/scannow 2 times that was suggested on another post. After the scannow both times it told me there were corrupt files that it couldnt fix. Any help moving on from here would be great.

Thank you.

EVAN-Thu_03_24_2016_212710_16.zip
CBS.zip

More replies
Relevance 64.78%

It's been over three months and I am still struggling with multiple BSOD.

I wish I were more able to fix this but, I am not.

If anyone will review to possibly help with this I appreciate it more than you know.

Spent over 2400$ on a new system and it's not gone long without BSOD or often just locking up requiring a restart.

New file created for diagnostics and uploaded.

Answer:BSOD random times, with random errors.

Pwnsesh mate don't quite fully understand what you mean by updating your driver?? There are a few in a system so which one ??

Also what are you doing with the BIOS?? It is something best left well alone unless you know what you are doing. Before you do anything I would back up the registry and any data you need.

Registry - Backup and Restore

Imaging with free Macrium

3 more replies
Relevance 64.78%

I have a random BSOD issue. I thought I had fixed it but still having issues.






Quote:
windows version: Windows 7 , 6.1, build: 7600
Hardware: ASUSTeK Computer INC., M2N-SLI
CPU: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AMD586
RAM: 4GB total


I recently installed Windows 7 home premium edition to a new hard drive. I was having issues with a small older drive, so I went with fresh install thinking it would fix my issues.

nope. New drive and new windows install and I still get BSOD at random times, and its not the same errors.



So I got a program to read what was causing crashes, Info below. ( not too good at forum formatting ether...) I also did the log dump program recommended on forums. its been attached.

Help? I have no clue as to why or what is going on anymore...I have read on these forums and googled my issue/error codes so much, with no solid fix. Its beyond frustrating.











Quote:
On Wed 10/21/2015 11:37:43 PM GMT your computer crashed
This was probably caused by the following module: amdk8.sys (amdk8+0x1BB6)
Bugcheck code: 0xA (0x51, 0xFF, 0x1, 0xFFFFFFFF82E04BF2)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\amdk8.sys
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Processor Device Driver
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at ... Read more

Answer:BSOD (random ones at random times) Windows 7

Had a look through your dumps and all of them blame a various core windows driver for the crash, as this cannot truly be the cause then some further testing will be required
Initially I would run an sfc scan to check for any corruption within windows itself SFC /SCANNOW Command - System File Checker
Next I would run memtest to perform a thorough test of the RAM, preferably overnight for a minimum of 8 passes SFC /SCANNOW Command - System File Checker

I notice you have no windows updates installed, it would be good to get this done as missing SP1 means you are a long way behind

Depending on the outcome of these will determine what else needs to be done but as the problem has transcended to a new HDD & OS then more hardware testing is likely

1 more replies
Relevance 64.78%

Has been happening on and off for the last couple of months, strangely enough the problem went away once after we had a power surge but has now returned, Usually get at least 1 a day at a random time ( Maybe a game, maybe on youtube, maybe just right clicking a folder )

Took a photo of it last time and got this error code,

*** STOP: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)

After a bit of searching this forum i found i should also post a dump log from C:\Windows\Minidump ... When trying this i keep getting an access is denied message but i have admin privileges ?

Should also add that i have read about faulty drivers/ software and ran software to "fix" the problems yet i still get the BSOD.

Will try and get the dump log on for my next reply but any ideas straight off the bat ? Seems to be quite a common problem.

Anthony

Answer:BSOD, Random times on Random days

Welcome aboard, Chovies.

Post it, following the Blue Screen of Death (BSOD) Posting Instructions so that we can get adequate information to help you.

5 more replies
Relevance 64.78%

Hi everyone,
I have a problem with my computer. I've had only had 2 bluescreens so far, but I'm rather concerned. The first bluescreen was when I just pulled the charger from my computer. The second time was right after I plugged in my charger. I have a new battery.

I have attached all the bsod files below. Thanks in advance.

System specs:
Windows 7 Home Premium 64 bit
Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
LENOVO 4173C19
4 GB total, 3.88 usable
HDD: HITACHI HTS723232A7A364
Sound card: Conexant 20672 SmartAudio HD
Graphics card: NVIDIA NVS 4200M

Answer:BSOD at random times while doing random things

MSINFO32:

Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter.
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSSIKAT\Downloads\BSOD\060815-88421-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18839.amd64fre.win7sp1_gdr.150427-0707
Machine Name:
Kernel base = 0xfffff800`03014000 PsLoadedModuleList = 0xfffff800`0325b730
Debug session time: Tue Jun 9 06:58:03.636 2015 (UTC + 6:00)
System Uptime: 3 days 1:50:56.466
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track dow... Read more

6 more replies
Relevance 64.78%

Hi,

I use my computer mostly for office work and have never experienced BSOD until about a month ago when I updated my drivers. One of the drivers I updated was the audio driver that immediately began causing problems including BSOD. I rolled back the driver update and reinstalled the driver which seemed to resolve the issue for a while but then after a week the BSOD began again and I have been unable to isolate the cause since then. I have continued to update firefox, antivirus, windows and other security software I have always used and these softwares never seemed to cause any problems before.

There are specific times when the BSOD occurs, mostly it is when I start the computer and during the first few minutes after windows loads or when I resume the computer from hibernate/sleep mode.

I have included the dump files and attached a screenshot.

Any help you can provide would be great.

Thank you

Answer:BSOD at random times while doing random activities

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_SF_17-02-2014.zip\SF_17-02-2014\021414-19593-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.x86fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0x8361a000 PsLoadedModuleList = 0x837634d0
Debug session time: Fri Feb 14 02:20:03.737 2014 (UTC - 5:00)
System Uptime: 0 days 0:03:02.814
Loading Kernel Symbols
...............................................................
................................................................
................................................................
..
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {440070, 2, 0, 8ca7ba1e}
Unable to load image \SystemRoot\system32\DRIVERS\TeeDriver.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for TeeDriver.sys
*** ERROR: Module load completed but s... Read more

8 more replies
Relevance 64.78%

DCP Watchdog, Memory Management, Kernel Security Failure and several others at random times - especially during large file transfers between drives. I did a memory test and it stated there was an issue but I removed the culprit and the random BSOD continues.

Thanks for your help

Answer:BSOD at Random Times for Random Reasons

Have you rerun the memory test? If so, did it pass?
Have you run other hardware diagnostics? Here's a link to the one's I suggest (and they're free): Hardware Diagnostics Start with the hard drive tests as this involves "large file transfers between drives"

You have 3 or 4 hard drives. What is the make/model/wattage and age of your Power Supply?

Lot's of Windows Updates failures in the WER section of the MSINFO32 report. If the problems continue, please post over in the Windows Updates & Activation - Windows 8 Forums for further expert assistance with this issue.

Out of 5 memory dumps there were 4 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- dirt/dust/hair/fur/crud inside the case. Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or H... Read more

1 more replies
Relevance 64.78%

Hi,
I am getting BSODs at random times, while doing different things each time. Been getting them for 5 days trying to narrow down what could be causing it. Searching lead me here. I did the posting instructions. Also did sfc/scannow 2 times that was suggested on another post. After the scannow both times it told me there were corrupt files that it couldnt fix. Any help moving on from here would be great.

Thank you.

Attachment 71239
Attachment 71240

Answer:BSOD at random times doing random things.

Please upload a new zip file, the attached zip file is empty

I can't find any problems in the CBS.log, but I'm no expert on that part.
Please try following command in admin command prompt

Code:
DISM /Online /Cleanup-Image /RestoreHealth

If there are problems with RestoreHealth, please follow step 6 or 7 (depending on the file you have from the download) from the tutorial DISM - Repair Windows 10 Image - Tutorial.
If /RestoreHealth says the corruption has been repaired succesful:


Diagnostics Test

 System File Check

Please try following:
Open an admin command promptCopy/paste "sfc/scannow" (without quotes) and press enterWhen it finished reboot your systemOpen again an admin command promptEnter sfc/scannow again
If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

2 more replies
Relevance 64.37%

i just buy a decent gaming pc with the prices about 600 $

processor : fx-6300 six core
graphics card : gtx geforce 650 ti
ram : 8 gb
anti virus : eset nod antivirus 32

i buy the pc without hardisk,since i want to use my old hardisk.
since the first day i buy the game a bsod apeared,but cuz i have little time
i never go to the shop again.until i think after about 5 month the pc can't
boot and always stuck on the startup with black screen and no cursor.
before that happend the pc always got bsod or sometime just a blank screen with random color,the bsod is always random,sometimes it say bad_pool_header or irql_not_less_or_equal or something like that.so i bring the pc to the shop,it say that my hardisk and graphic cards is broken,so i change the gpu to nvidia geforce gt 740 and buy a new hardisk.

and so i re install windows and buy a new casing,the bsod appear again with bad_pool_header.i was desparate since am not computer expert so i don't know what else to do and the shop where i buy is just a dead end since they don't really know what's wrong.so i browse the internet,run memtest,downloading the blue screen viewer,and i suprise that i got so many bsod with the same driver error,ntoskrnl.exe . so i browse the internet searching how to fix ntoskrnl.exe bsod. but i don't have time to do all of the method.

oh and all the bsod i got according from bsod viewer :
bad_pool_header
irql_not_less_or_equal
Memory_Managment
Page_Fault_in_Nonpaged_Area
KMODE_EXCEP... Read more

Answer:BSOD On Random Times with Random Bsod ntoskrnl.exe

got another bsod when playing gta 4 with a meassage bad_pool_header

1 more replies
Relevance 62.73%
Question: BSOD random times

Hi, I have getting bsod randomly times while using computer, no matter what i do. On win7 i haven't any bsod, since i install win8 problems become. SF_Diagnostic_Tool file in attachment. I hope that someone can help. Sorry for my bad english.

Attachment 41936

Answer:BSOD random times

Only 18 Windows updatesinstalled ensure that you have ALL Windows Updates. Most Windows 8.1 systemhave around 55 or moreupdates on average). Please also install the windows 8.1update 1.
The Windows 8.1 Update and Windows RT 8.1Update also include security and performance updates, and they must beinstalled for your PC to receive any future security updates for Windows 8.1 or Windows RT 8.1

Your D: drive has only 6% free, windows like to have about 15% free space for running the system. Pleae make some space on your disk.

Both dumpfiles with BugCheck 3B and BugCheck D1 blames Probably caused by : L1C63x64.sys ( L1C63x64+61ae ). L1C63x64.sys is the driver for your Qualcomm Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.30).

Daemon Tools (and Alcohol % software)are known to cause BSOD's on some Windows systems (mostly due to the sptd.sysdriver, although I have seen dtsoftbus01.sys blamed on several occasions).






Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver isremoved from your system (pick the 32 or 64 bit system depending on yoursystem's configuration)

New link (15 Aug 2012):DuplexSecure -Downloads(pick the appropriate version for your system andselect "Un-install" when you run it).

Alternate link: Disk-Tools.com

Manual procedure here: | Registry and SPTD problems | DAEMON Pro Help

(source:canned speech of John Carrona)



Info: Nero. Sadly we h... Read more

2 more replies
Relevance 62.73%

Hey there,
I used to have some problems with my machine, running WinXP, and had some BSOD before but in a very low frequency. It would've gone weeks without one sometimes. Recently I've upgraded my graphics card and power supply unit, so I also decided to upgrade for Vista, just for the DX10 support in games. But ever since I upgraded I've been having random BSOD for 4-5 times a day, sometimes more, for no apparent reason. I'll be watching a stream online, and it'll crash. Launch a game, and suddenly crash. Even when I'm just browsing the internet, it sometimes just crashes, it did crash 2 minutes ago, when I was writing this post.
I can't manage to read what the BSOD says because it just restarts the machine after some counter reaches 100% (which is pretty quickly), but I did managed to catch the word Minidump one time, and it said I can press F8 for advanced something. Not sure if that helps though.
I've ran the Vista Crash Solution thingy several times, but it only told me that I should upgrade my PCI drivers from Realtek, which are having some serious ****-ups in their website and I can't download the latest from there, but I did install all the drivers from my motherboard's installation CD (I only bought it 6-8 months ago, it can't be that out-dated).

Anyone having any ideas about this? It's not the worst case ever but it pisses me off. And needing to quicksave and backup everything I do is not fun.
 

More replies
Relevance 62.73%

This problem started July 2010 I believe. I get random blue screens even if no programs are running.

ASUS Notebook N61Jq
-x64
-Original OS installed on system
-OEM
-Bought system in Feb. 2010 from Newegg
- OS has not been reinstalled

Drinks on me if you guys can help me figure this out. Thanks in advance!

Answer:BSOD at random times.

A quick glance at your dumps suggests a hardware error. One of the dumps was a 0x124, so see this article: Stop 0x124 - what it means and what to try

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Test your CPU: http://www.sevenforums.com/tutorials...t-prime95.html

Test your hard drive: HD Diagnostic

A bit deeper look reveals the presence of Daemon Tools Lite, which is using the driver SPTD.sys. SPTD is known for causing BSODs, even 0x124 ones. I would therefore remove Daemon Tools, and then uninstall SPTD with this tool: HD Diagnostic

...Summary of the Dumps:
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sat Jul 24 19:24:15.393 2010 (UTC - 4:00)
System Uptime: 0 days 1:05:07.454
BugCheck 124, {4, fffffa8004bc8038, 0, 0}
Probably caused by : hardware
BUGCHECK_STR: 0x124_4
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sat Jul 24 17:08:37.761 2010 (UTC - 4:00)
System Uptime: 0 days 1:16:26.822
BugCheck 1A, {41790, fffffa8000cc60f0, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33946 )
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: SkypeNames2.ex
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.... Read more

9 more replies
Relevance 62.73%

I have the following home built computer:
Windows 7 x64
Processor: AMD FX 8120
Ram: 16GIG Patriot Signature Series DDR 3 PSD34G1600HK
MB: ASUS M5A9X EVO R1
Video: Radeon HD6750
Hard drives
C:\ SSD 128 GB Sandisk Operating System Installed on this drive
D:\ 1TB Seagate programs installed on this drive
E:\ all documents mostly photos installed on this drive (I am a photographer this is my editing computer)
F:\ Music files

I have done the following:
1. Had computer scanned by a computer repair facility for faulty hardware, found two bad memory sticks.
These sticks were replaced with new from Patriot.
2. Added SSD drive and installed windows to SSD. Installed programs to D: drive and work files to the other
drives as detailed above.

Then the BSODs started, mostly when installing updates specifically JAVA and Adobe. BSOD have also occurred when sitting idle or surfing the net (Google Chrome). After a recovery from an Update BSOD windows would look for a solution and soon after there would be more updates.
Attached is the latest SF_diagnostics from the latest crash during startup.
can anyone tell me what is going on. Thank you in advance for any help

Answer:BSOD at random times

Welcome
Your file indicates BC error 109. This is usually the result of corrupt files, which does agree with your observation that it began after updates.
The best way to solve this problem is to perform a system restore, back a week before the problem began.
System Restore
If this procedure does not solve your BSODs, I would look at memory problems. Run memtest to check your memory
Run memtest for 6 passes testing each stick separately. Then test all for 6 passes
Guide to using Memtest86+ - Geeks to Go Forums

1 more replies
Relevance 62.73%

Hello gentlemen!

I need some help, I am getting BSOD's of "ATTEMPTED_WRITE_TO_READONLY_MEMORY".

I am running SFC /SCANNOW already, but here are the log files:

DESKTOP-MSF4MPQ-15_11_2016_102039,91.zip

I recently configured to generate mini-dumps!

EDIT

Just after I posted, I got another BSOD. Here is the newer dump.

DESKTOP-MSF4MPQ-15_11_2016_103818,50.zip

EDIT

I already finished sfc /scannow and the /checkhealth and /restorehealth commands and nothing was found, ran the memory test from windows too (the simple way) and nothing was found.
Thanks!

Answer:BSOD at random times.

Up. Could someone analyze my dumps?

3 more replies
Relevance 62.73%

okay so i have Been getting BSOD at random times i think it says Not Less Or Equal when i get the BSOD
some times i get them 2-3 times a day and some times i dont get one for days, sorry for the lack of info i am not super good with computers

Answer:BSOD at random times

Windows Genuine and Activation Issue Posting Instructions

3 more replies
Relevance 62.73%
Question: BSOD Random Times

For the past two days, I have been getting the BSOD randomly. The only error code I get is Kernal_Data_Inpage_Error.

Thank you for your help!

SF_15-01-2015.zip

Answer:BSOD Random Times

These are problem devices. Please update drivers for them:

Code:
Bluetooth Audio Device BTHENUM\{61118058-486C-4BB0-B4B8-ACE4DCADEC44}_LOCALMFG&0000\8&C6EA8C2&0&000000000000_00000000 This device cannot start.
Virtual Bluetooth Support (Include Audio) BTHENUM\{CBECAB40-A2C8-4AB3-ADC1-DE0FE95D8600}_LOCALMFG&0000\8&C6EA8C2&0&000000000000_00000000 This device is not working properly because Windows cannot load the drivers required for this device.
Bluetooth LWFLT Device BTHENUM\{DD533152-01F4-435C-ABFE-984BC21A2A65}_LOCALMFG&0000\8&C6EA8C2&0&000000000000_00000000 This device is not working properly because Windows cannot load the drivers required for this device.
Bluetooth Device (Personal Area Network) BTH\MS_BTHPAN\7&1FE4CFC8&0&2 This device is disabled.
Dell Wireless 1703 802.11b|g|n (2.4GHz) PCI\VEN_168C&DEV_0032&SUBSYS_02091028&REV_01\4&17D8C9C8&0&00E2 This device is disabled.


Uninstall the software related to the driver in red.


Code:
PxHlpa64.sys Tue Oct 20 20:08:42 2009 (4ADDFCAA)
Sonic CD/DVD driver (used by many different CD/DVD programs)
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys

CLVirtualDrive.sys Mon Dec 26 14:26:47 2011 (4EF87617)
CyberLink Virtual Device Driver
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys

FintekCIR.sys Mon Mar 5 08:36:39 2012 (4F546D07)

FintekCIR.sys - this driver hasn't bee... Read more

1 more replies
Relevance 62.73%

In the past week I have gotten two BSODs and one time the computer froze no matter what I pushed I couldn't unfreeze it. I think it has something to do with Microsoft-Windows-WLAN-AutoConfig. The first time it crashed this way was when I was playing Backyard Baseball, the second time was when I was browsing the net.Then the computer freezed when starting up a game called frozen synapse. Nothing else seems particular about the crashes except when I looked at the event log it said the source of the problem was Microsoft-Windows-WLAN-AutoConfig. There was nothing in the event viewer about the freeze.

Answer:BSOD at random times

Hi There,

The cause seems to be your USB Wireless Adapter,


Code:
BugCheck D1, {fffff8800df80000, 2, 0, fffff88002ad036c}

Unable to load image \SystemRoot\system32\DRIVERS\netr28ux.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netr28ux.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28ux.sys
Probably caused by : netr28ux.sys ( netr28ux+1236c )

Followup: MachineOwner
Which is pretty old,


Code:
Loaded symbol image file: netr28ux.sys
Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
Image name: netr28ux.sys
Timestamp: Sun May 24 21:38:17 2009 (4A1A20B9)
CheckSum: 000EE46C
ImageSize: 000F4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try updating the driver here,

WUSB600N Support | Dual-Band Wireless-N USB Network Adapter

Let us know how things go with that driver.

9 more replies
Relevance 62.73%
Question: BSOD Random Times

Hi, I have been getting BSOD randomly on my 4 years old Toshiba Satellite A305-S6905 (Model No. PSAG8U-04001W) running Windows 7 32bit. I had some Chinese 360 security software installed before which I have removed (though some remains may still be there). I have done disk checks which showed no problems. SFC also showed no problems, but I am having problems with Windows Update even with a hard reset on WU.

I have attached the BSOD collection folder below but perfmon did not work properly. Here's what I got from BlueScreenView though:

Quote:




==================================================
Dump File : 071013-24429-01.dmp
Crash Time : 7/10/2013 5:44:34 PM
Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000008e
Parameter 1 : 0xc0000005
Parameter 2 : 0x8b63a457
Parameter 3 : 0x8d902ed4
Parameter 4 : 0x00000000
Caused By Driver : fltmgr.sys
Caused By Address : fltmgr.sys+22457
File Description : Microsoft Filesystem Filter Manager
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Crash Address : fltmgr.sys+22457
Stack Address 1 : fltmgr.sys+a753
Stack Address 2 : fltmgr.sys+5ed2
Stack Address 3 : fltmgr.sys+63ba
Computer Name :
Full Path : C:\Windows\Minidump\071013-24429-01.dmp
Processors Count : 2
Major Version : 15
Minor Ve... Read more

Answer:BSOD Random Times

Hi,

Of the attached dumps we have:

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)

The processor identified a problem, but Windows was unable to deal with it.
This problem can appear when one of these issues occurs:
Low disk space in the primary system drive
A driver bug (which may be identified in the message).
Video adapter problems
A BIOS bug
BIOS caching or shadowing
DRIVER_VERIFIER_IOMANAGER_VIOLATION (c9)

Quote:




The IO manager has caught a misbehaving driver





In the verifier enabled dump, it's not flagging a culprit device driver, and if we run an !irp on the 3rd parameter = afea0ed8

Code:
1: kd> !irp afea0ed8
Irp is active with 5 stacks 4 is current (= 0xafea0fb4)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 2 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 c0000010
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 17,ff] 0 2 a238ad38 00000000 00000000-00000000
a238ad38: Could not read device object or _DEVICE_OBJECT not found

Args: 8b2e6f00 00000000 00000000 00000000
>[ 17,ff] 0 e0 a238ad38 00000000 83939d56-afea0fd8 Success Error Cancel
a238ad38: Could not read device object or _DEVICE_OBJECT not found
nt!IovpInternalCompletionTrap
Args: 8b2e6f00 00000000 00000000... Read more

1 more replies
Relevance 62.73%

Okay so I have been having various problems with my computer over the past few months and I have a little bit of an idea of what it is but I cannot think of a solution that does not include me buying a new motherboard. So I am having BSODs a few times a day at different times. I have reinstalled Windows and that did not fix anything. I have also updated the drivers which did not do anything either. Also please do not tell me that it is my memory because I have checked it and that is not the problem. Thanks to anyone that can help me.

Answer:BSOD at Random Times

Here are what the dump files read


Code:
lmvm intelppm
start end module name
fffff880`047d5000 fffff880`047eb000 intelppm (pdb symbols) c:\symcache\intelppm.pdb\08BB31C0378D48EC8CB513240E096A171\intelppm.pdb
Loaded symbol image file: intelppm.sys
Mapped memory image file: c:\symcache\intelppm.sys\4A5BC0FD16000\intelppm.sys
Image path: \SystemRoot\system32\DRIVERS\intelppm.sys
Image name: intelppm.sys
Timestamp: Mon Jul 13 18:19:25 2009 (4A5BC0FD)
CheckSum: 0000F4EC
ImageSize: 00016000
File version: 6.1.7600.16385
Product version: 6.1.7600.16385

Code:
lmvm iusb3xhc
start end module name
fffff880`0ff1c000 fffff880`0ffe0000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Mon Feb 27 04:56:53 2012 (4F4B6175)
CheckSum: 000C5E11
ImageSize: 000C4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
This one is the Intel(R) USB 3.0 eXtensible Host Controller Driver and the first one is the Intel Processor driver. Both can be updated from http://downloadcenter.intel.com/


Code:
lmvm vwififlt
start end module name
fffff880`02e2f000 fffff880`02e45000 vwififlt (pdb symbols) c:\symcache\vwififlt.pdb\0F59BB2FF3BD45C49FCF8D912027E... Read more

1 more replies
Relevance 62.73%

Hi,

I have recently upgraded my computer from an AMD setup to an Intel setup. Kept the same Graphics card (ATI HD5770). I re-installed windows 7 (64bit) from fresh to get around any driver issues.

Now I get "SYTEM_SERVICE_EXCEPTION" BSOD at seemingly random points. It's not always when the CPU or Graphics are working hard. Ran a memtest 86 on the sticks and no errors are reported after a couple of passes. I used BlueScreenViewer to have a look at one of the BSODs and could see a DLL called ATIKMG referenced, which could be something to do with the graphics card ? (latest drivers).

OS - Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retails
? Age of system (hardware) Mix between brand new and 4 years
? Age of OS installation - have you re-installed the OS? 2 weeks. Yes

? CPU - Intel i5 2500K
? Video Card ATI HD 5770
? MotherBoard Not sure, Z68 chipset
? Power Supply - brand & wattage Corsair 520W

? System Manufacturer Me
? Exact model number (if laptop, check label on bottom) NA

Attached is the required files. Thanks for looking

John

Answer:BSOD at random times

Service Pack 1 isn't installed. Please do the following:

Quote:




Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 SP1 and Windows Server 2008 R2 SP1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates




02.11n USB Wireless LAN Card installed. These will give you BSOD's if using older, Vista drivers. Here's my rant about these devices:

Quote:




I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.




The WER section of MSINFO32 shows 4 BSOD errors
2 STOP 0x1E... Read more

6 more replies
Relevance 62.73%

Hello,

I have been experiencing random BSOD. It can occur a few minutes after logging into Windows or randomly while using the system. This has been happening for a while (a year); however, I am barley getting around to address this. I wouldn't be able to recall any software installed to pinpoint when it exactly started. I have attached the log per instructions.

I'm happy to provide additional information. Thank you.

Answer:BSOD at Random Times

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

9 more replies
Relevance 62.73%

I get bluescreens at random times of the day. These last few times, it has happened while I was afk. It also got worse after the newest Windows updates.

This is the message I get when Windows starts after reset:

OS-version: 6.1.7600.2.0.0.768.3
BCCode: 7a
BCP1: FFFFF6FC400084D0
BCP2: FFFFFFFFC0000185
BCP3: 0000000072C0F860
BCP4: FFFFF8800109A008
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

I also uploaded the dump files. I hope someone can help me, since I have no clue what to do. I'm not too good with computers

Answer:BSOD at random times

Welcome aboard.
STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR

Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack (source: Carrona.org)
What I am getting from your crash dump is

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fc400088f8, ffffffffc0000185, 8329e860, fffff8800111f008}

GetPointerFromAddress: unable to read from fffff800030c8278
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************... Read more

5 more replies
Relevance 62.73%

Hello,

I had two random BSOD once whist watching a video in VLC and once whilst I wan on YouTube. I have formated my computer with genuine Windows 2 weeks ago.

I do not know if more information is needed. I have uploaded a .zip file as stated in the instructions.

Any help will be greatly appreciated.

Thank you in advance,

Vlassis

Answer:BSOD at 2 random times.

Uninstall the installed display driver using Display Driver Uninstaller. Then install the CCC 14.4 WHQL only.

Let us know for any further BSOD after doing it.
_____________________________________________

Code:
BugCheck A0000001, {5, 0, 0, 0}

Probably caused by : atikmdag.sys ( atikmdag+277ce )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Unknown bugcheck code (a0000001)
Unknown bugcheck description
Arguments:
Arg1: 0000000000000005
Arg2: 0000000000000000
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xA0000001

PROCESS_NAME: System

CURRENT_IRQL: 8

ANALYSIS_VERSION: 6.3.9600.17336 (debuggers(dbg).150226-1500) amd64fre

DPC_STACK_BASE: FFFFF80000BA0FB0

LAST_CONTROL_TRANSFER: from fffff8800f10c7ce to fffff8000327a8c0

STACK_TEXT:
fffff800`00b9a6c8 fffff880`0f10c7ce : 00000000`a0000001 00000000`00000005 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff800`00b9a6d0 00000000`a0000001 : 00000000`00000005 00000000`00000000 00000000`... Read more

9 more replies
Relevance 62.73%

BSOD is appearing at random times. Dump files goes from 0-100% in a few seconds. I have attached the the BSOD dump file. Also "error after BSOD" appears after restart. The com surrogate error appeared when "System Health Report" was running.

It takes a lot of time to restore from hibernation.

Answer:BSOD on random times

I have faced BSOD 4 times since morning. Can't even open device manager. Windows update gave the following error.

9 more replies
Relevance 62.73%

Twice now have I returned to my computer to find the dreaded BSOD on it. This is a different make/model than what is posted on my bio/info...but here is the ?'s answered best I can...

Win 7 32 bit
HP Elite Book
Vista OEM originally -- upgraded to win7 Home
OS install is 6 months old
Age of system hardware --- IDK?!

Let me know if I can provide any further info

Answer:BSOD @ Random Times

Your analysis indicated Norton to be the cause of your crashes.

Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST.

http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

5 more replies
Relevance 62.73%

I know this has been done to death but I can't seem to find the solution to my problem. I just recently re-installed windows in hopes of fixing the problem to no avail. All my drivers are up to date and I've run memtest for 18+ hours and it passed with no fails. I've attached the zip file that was created from using the DM log collector. I hope someone here can help me out, it's driving me crazy! Thanks in advance.

Answer:BSOD at random times

Hi cronus151.

Uninstall the installed display driver using Display Driver Uninstaller. Then install the CCC 14.4 WHQL only.

When done, Stress test the Graphics Card using Furmark. Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

Also let us know for any further BSOD.
_____________________________________________

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff880125bae50, fffff8800410c888, fffff8800410c0e0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+94 )

Followup: MachineOwner
---------

Code:
BugCheck 3B, {c0000005, fffff880123a3ded, fffff880078b9ae0, 0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+31 )

Followup: MachineOwner
---------

5 more replies
Relevance 62.73%

i returned the computer twice and having more problems
i think it maybe a driver problem so maybe can you guys give me a link to free driver download program thanks
and i get the bsod at random times at start up and playing a steam game...

Answer:BSOD at random times

Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (notbefore).

9 more replies
Relevance 62.73%

Hello everyone i have been getting bsod for a long time now. i don't know what is causing this issue. i have re install windows 7 and i would still get bsod and freezes.
i will upload my mini dump file.
i would really like to get this problem fix. if you need to know my pc's specs please let me know

Answer:BSOD on random times.

  
Quote: Originally Posted by simer1


Hello everyone i have been getting bsod for a long time now. i don't know what is causing this issue. i have re install windows 7 and i would still get bsod and freezes.
i will upload my mini dump file.
i would really like to get this problem fix. if you need to know my pc's specs please let me know


These three blamed on 3 different OS files. Please run a SFC to verify and repair them.

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

It may need to be run up to three times before sucessful

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.

7 more replies
Relevance 62.73%

My PC has been crashing a lot lately and I'm not exactly tech savvy so I hope I can get some help with this.
It crashes at random times and I had a friend help me who said it was likely to do with the OS but wasn't sure so I was redirected here.
I will include the dump file.

Answer:BSOD at random times.

Here:
Attachment 289075

2 more replies
Relevance 62.73%

Hi all, well hopefully I've done everything I'm supposed to do to help somebody help me fix my computer. Today I got a "Bad_POOL_HEADER"? Can someone please help me fix my pc problems.

Answer:BSOD at random times?

Latest dmps show:

BSOD error code: 7e

one caused by ntkrnlpa.exe [basic Windows file, required] (Might be caused by bad registry entries)

Did this happen coming out of sleep mode or anything?

BAD Pool Header research seemed to scare up a driver being the cause of those, particular keen on wireless devices, got any? and installed a driver recently? [check device manager and see if you have anything showing up with a !]

Do:
SFC /scannow
from Start | run/search box, this verifies windows files integrity.

Virus scan lately? Registry scan?

Try CCleaner from piriform.com for registry cleaning and temp files, pretty much the top freeware program for that purpose, and malwarebytes.com for their A/V scanning product.

9 more replies
Relevance 62.73%

I have attempted to use whocrashed and tried some other things through MS tools but its a different crash almost every time I tried to reinstall win 7x64 but it didn't really help. I think I've posted everything correctly....I think. I Also Have an aver media c9800 but I took it out to see if this was the cause. I have also stress tested using prime95 memtest86 all passed. I have stress tested the graphics card with furb something no errors.

PC/Desktop
Custom Build OS Windows 7 X64 CPU Core i7 4770k Motherboard MSI Z87-G55 Memory 32GB of Corsair CML8g(1600MHZ) Graphics Card(s) Asus MATRIX-HD7970-P-3GD5 Hard Drives Samsung Evo 840 120 GB
PSu Rosewell 800w
All stock never over clocked

Answer:BSOD happens at random times

Hi thee3rdprophet.

Update your ATI/AMD display driver to the latest WHQL.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Also, some BSODs reported the network driver is failing. It is doubtful, as the driver is not enough old to fail. Still, update it to the latest from Realtek . If the network driver is failing again, we have to think that something else is causing disturbances there.

Let us know the results.
________________________________________________________________________________________

Code:
BugCheck 1E, {ffffffffc0000005, fffff880027cd700, 0, 0}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys ( Rt64win7+313... Read more

4 more replies
Relevance 62.73%

So after a while of no upgrades to my computer i decided to get some new ram and a new cpu...At first i just instaled the ram and cpu... It was good for 5 min than BSOD i restard BSOD again and so on and so on... And it's frustrating beacuse sometimes i dont get a BSOD for the whole day sometimes i get it 3 times in a row and soo on...I've ran memory diagnostics with no erors 10 pases. I tried memtest too also with no errors... But i still think it has something too do with my RAM soo anyway i will post some basic info of my OS and attach the dump files and such...

- My os is x64 ?
- First it was win xp than vista than win 7
- full retail version-Fresh install a week ago
- I think it's not more than a year old (Hardware)
- I have reinstalled win 7 but nothing changed BSOD-s all the time

Answer:BSOD at random times

When you do hardware upgrades, such as you have done, it's best to only do one thing at a time, e.g. only the CPU or only the memory and then test it and run it for a couple of days to make sure it's all working correctly and then do the next hardware upgrade. Doing it one at a time, if there is a problem you know what it is. Doing more than one thing at a time and you don't know which one caused the problem. As it's easier to remove memory, suggest the first thing you do is fall back to the original memory that worked OK and see if the problem (Blue screens) go away or if you still have them. If you still have them, the most obvious problem would be the CPU (or possibly some incompatibility problem with this CPU and your motherboard or BIOS).

2 more replies
Relevance 62.73%

My cousin just called me, and he is away at college. So I am trying to solve his BSOD issue. He says it's rather random, sometimes while using word, other times in CAD.

Just trying to help him resolve this:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C04F2EB0
BCP2: C0000185
BCP3: 06C2E8C0
BCP4: 9E5D6000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\120611-16926-01.dmp
C:\Users\Matt\AppData\Local\Temp\WER-42229-0.sysdata.xml

Answer:BSOD at random times.

* Pass this message on to your cousin...

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

1 more replies
Relevance 62.73%

I have been getting Random BSOD errors I am wondering if my pc is defective

Answer:BSOD at random times

Hello and welcome Baroger mate done any malware scans? If not try these if you have not got them or run them for starters.


http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

4 more replies
Relevance 62.73%
Question: BSOD random times

Hi all,

I have a Windows Vista Laptop that has numerous problems on. So I thought I would try and solve a few of them, with no luck. So hopefully with a few of you guys here, we can

Anyway,

Basically, my screen keeps flickering and what not, not a typical BSOD. Although when I logged in this morning, it said it had recovered from a BSOD...
I loaded up BlueScreenView and found this errors, please find attached picture,
Here are the dump files attached:

Thank you for your help

Answer:BSOD random times

Your files show a hardware problem, code 124. Rather than take guesses, I will allow you to read one of the best posts that we have on code 124. Good luck
Stop 0x124 - what it means and what to try - Windows 7 Forums

14 more replies
Relevance 62.73%

I am getting a blue screen of death at least once I day and usually while I am sleeping. I have gathered the information that is requested and it is attached. The description that I am getting from action center is, The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xffffe0010461f060, 0xfffff8007ace5960, 0xffffe0010d5c1010). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 010315-14843-01.

I already tried doing system restore once, it seemed like it worked for a few days and then the problem started right back. I would great appreciate any help as I use my computer as my alarm clock and it restarting like this is going to bite me one day when my cell phone doesn't wake me lol.

Edit: I updated My System Specs to provide additional info. Thanks!

Answer:BSOD random times at least 1x a day

bump

2 more replies
Relevance 62.73%

Hi everyone,

I'm new to this forum and hopefully someone can figure out what's going on with my computer.

My computer is experiencing BSOD at random times. On average, it's probably happening twice a week.

Here are my specs:

- Windows 7 Pro x64 OEM
- Hardware is pretty new. Core i5 2500K, Asus P8P67-M board, 8GB of RAM, XFX AMD 5850 Video card

Any help is appreciated!

Answer:BSOD at random times

Looks like a problem with your ram from here.
You should test it overnight with memtest86 and see what comes out.
RAM - Test with Memtest86+


Code:
Probably caused by : memory_corruption

Followup: memory_corruption
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89f39c784, Reserved
Arg2: b3b7465ef1b79732, Reserved
Arg3: fffff80003012324, Failure type dependent ... Read more

9 more replies
Relevance 62.73%

I have been getting all sorts of BSOD errors with different errors at different times. I have tried a memtest and figured out that one of my RAM ports is a bit faulty so I have since removed the RAM card from that slot and am just running on 1 4gb RAM card. I have also removed Norton which I was told can cause BSOD. I really would rather not reset my entire computer for a chance to fix this error if I could just get help instead.

Answer:BSOD at random times

Overclocking
If you are overclocking any hardware, STOP. Reset any changed values back to default.

Virus check

Scan your system with the following:

Kaspersky TDSSKiller - How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)

ESET online scanner - One-time virus scanner free with ESET online scanner

Hard Drive/Storage

Post disk summary using CrystalDiskInfo software: CrystalDiskInfo Standard Edition
For how to upload a screenshot or file, read here
Make a hard drive test from the hard drive manufacturers website: Hard Drive Diagnostic Procedure

For errors on your Hard drive(s): How to Run Disk Check in Windows 7

Memtest86+

Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. How to Test and Diagnose RAM Issues with Memtest86+



   Note
Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.



   Tip
Do this test overnight.

System Temperature

Ensure that there are no heat issues, For monitoring heat of the system use Speccy or HWMonitor

BSOD BUGCHECK SUMMARY

Code:
*******************************************************************************
* *
* ... Read more

9 more replies
Relevance 62.73%

I just finished building my gaming computer, when I started getting BSODs at seemingly random times. I started to notice though, that i got them most frequently when downloading games. I have crashed many times in the last few days probably about 10-12 times.
I did a clean install, because i thought maybe the windows OS wasn't used to all my new hardware, but that definitely didn't stop the BSODs. because of the clean install I had to install all of my games again, and it seems that i get the mist crashes when Steam is downloading games, or origin is downloading games, or i am streaming movies.
I would really like help on this, as i wish to finally be able to work and game without being interrupted by a crash.
Here are my specs:
ASRock z68 Pro3 MOBO
Intel core-i5 2500 CPU (not the unlocked model) with stock heatsink
8 gigabytes of HyperX RAM DDR3 PC3 1333
Seagate barracuda 500 gigabyte HDD

Diablotek DA series 600 watt PSU
AMD radeon HD 7770 by SAPPHIRE

AOC 21 inch monitor

My dump files and HTML thing are in the attached .zip file

Answer:BSOD at random times

Just a quick suggestion. I find it handy to have a spare network card laying around - in case mine goes bad, or if I have to test others. They only cost about $15 (US) and will save you a world of trouble if you're having network related crashes!

Running the last 10 memory dumps......

perfmon shows that you don't have drivers installed for your Intel video controller. Please visit the Intel Download Center to download/install it's drivers: http://downloadcenter.intel.com
I presume that this is an onboard video card that's not disabled in your BIOS.

Only 61 updates since SP1 - most systems have from 75 to 130. Please visit Windows Update and get all available updates.

You have a NETGEAR WNDA3100v2 N600 Wireless Dual Band USB Adapter. Win7 doesn't like these devices, and with older (Vista-era) drivers will spit out BSOD's faster than you can count them! Here's my rant on these devices:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


AsRock eXtreme Tuner is known to cause BSOD's on some Win7 systems. Please uninstall it.
If overclocking, please return the syste... Read more

9 more replies
Relevance 62.73%

I usually turn to get BSOD when it gets abit heat up.

Answer:BSOD at random times

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

9 more replies
Relevance 62.73%

I just got a refurbished HP 6710F a week ago, and lately it's been BSOD'ing on me every day, randomly. Please help

Answer:BSOD at random times

Hello,

Please see: http://www.sevenforums.com/crashes-d...tructions.html

4 more replies
Relevance 62.73%

Usually I will come to my computer and noticed a message saying my computer has recovered from an unexpected problem. After a few times, I updated my video card and checked other drivers to make sure everything was up to date. Today March 31, 2015, I got another BSOD while play League of Legends, which this is the first time I've been present while it happened. I have attached my DM Log Collector file.

Answer:Random Times - BSOD

Code:
0: kd> !devobj fffffa8010135060
Device object (fffffa8010135060) is for:
Cannot read info offset from nt!ObpInfoMaskToOffset
\Driver\iusb3hub DriverObject fffffa800b748d60
Current Irp 00000000 RefCount 1 Type 00000022 Flags 00003040
DevExt fffffa80101351b0 DevObjExt fffffa8010135400 DevNode fffffa800f85b530
ExtensionFlags (0xc0000800) DOE_DEFAULT_SD_PRESENT, DOE_BOTTOM_OF_FDO_STACK,
DOE_DESIGNATED_FDO
Characteristics (0x00000180) FILE_AUTOGENERATED_DEVICE_NAME, FILE_DEVICE_SECURE_OPEN
AttachedDevice (Upper) fffffa800f8095f0 \DRIVER\VERIFIER_FILTER
Device queue is not busy.
0: kd> lmvm iusb3hub
start end module name
fffff880`04f88000 fffff880`04fe7000 iusb3hub T (no symbols)
Loaded symbol image file: iusb3hub.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
Image name: iusb3hub.sys
Timestamp: Fri Mar 29 23:06:15 2013 (51558ABF)
CheckSum: 00064C0C
ImageSize: 0005F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the USB3 hub driver here:
https://downloadcenter.intel.com/

5 more replies
Relevance 62.73%

Hello,
i'm new with this and i'm sure I have some hardware problem but I cannot figure out what is it.
I tested ram memory and it passed. I tested hard disks and I found 4kb of bad sectors, on one hdd (maybe this is problem?).
I uploaded minidumps so you can analize.

Thanks in advance

Answer:BSOD in random times

Please have a read of this and post as per instructions
We need more than just the dumps
Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Relevance 62.73%

Hi All,

I'm new here so bare with me but I seem to be having some problems with windows 7.

I was using XP until I got hold of a copy of 7. Everything installed fine but I am having a few issue:

When just browsing, desktop tasks etc, thing tend to randomly lock up and say not responding, once this happens, the computer becomes unusable. The solution is to reboot but the pc can then lock up again the next time and I have to keep rebooting. This lockup seems to be totally random, the computer sometimes works fine for hours or other times can lock up 3 times in a row just trying to load startup programs.
The other issue I am having is BSOD also at totally random times.

I have run memory diagnostic and it passed 100% with no problems. I have also checked the disk health on all HDDs with everything fine.

Attached are the memory dumps. If there is anything else you need to know, just ask!

Many thanks!

Answer:BSOD at random times

p.s. I just used Blue Screen Viewer and it seems two files that are generally highlighed in red in the dump files:

halmacpi.dlll
ntkrnlpa.exe

Maybe this has something to do with it?

6 more replies
Relevance 62.73%

Hello, I have been having random BSODs and sometimes just plain freezing since I built my computer around November 2009. Everything seemed normal for about a month recently until I got numerous BSODs yesterday and today. This pattern happens every couple months. I have not installed any new hardware and maybe only 2 or 3 new programs. I really cannot figure this out. Can someone please help me?

I first thought it was related to my Antivirus software. I have went through many of them and the only one that caused no problems was Avira free. Everything was working fine for awhile after i installed Avira until now.

I have tested with memtest and windows memory diagnostic in the past and there were no problems. ( I did not test each stick of ram separately)

All of the hardware in my computer is new except a floppy drive, 2 hard drives, and my sound card.

Notes: Windows 7 told me that my 80 GB hd was failing. Windows displays my CPU at 2.67 GHz but it is supposed to be 2.66 GHz. When my computer would freeze before sometimes I would restart it and it would display 8GB instead of 12GB and the BIOS would switch boot drives.

Here are my specs:

OS: Windows 7 Ultimate x64 Build 6.1.7.7600
Motherboard: Asus P6T LGA 1366 Motherboard
CPU: Intel Core i7 920 / 2.66GHz
PSU: Ultra 750-Watt Power Supply
Ram: 12 GB Corsair XMS3 Tri Channel PC10666 DDR3 Memory 6 x 2048
Drives:
Floppy Drive

Samsung DVDRW Drive 22x

Hard Drives:
Maxtor 150 gb hd - *OLDER

... Read more

Answer:BSOD at random times

Welcome!

I see 2 possible causes. The first is remnants of AVG, specifically the files aswMonFlt.sys and avgmfx64.sys. See if you can manually delete those files. Show all hidden and OS files, and search for them in My Computer.

The other thing you can try is a memory test. I know you already did one, but try using a different program, namely, Memtest86. Burn the ISO to a CD using ImgBurn, and boot from it and run at least 5 passes.

Good luck!
~JK

9 more replies
Relevance 62.73%

Hello everyone,

So I have an HP Envy 14 (2011) and it has had a restarting problem since only a few months of ownership. I have never figured out how to fix it but just a few days ago I wiped the computer clean and restarted anew. And it is doing it more than ever now. Please can someone save my computer before I throw it out of the window

Here is what popped up last time it crashed (15 minutes ago):

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: fe
BCP1: 0000000000000008
BCP2: 0000000000000006
BCP3: 0000000000000005
BCP4: FFFFFA8009F987A0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I honestly do not know what any of the above means so your help is much appreciated!

Thanks Everyone!

Answer:BSOD at random times.

Welcome aboard.

You are getting a STOP 0x000000FE: BUGCODE_USB_DRIVER error, probably caused by usbhub.sys. In all the three dumps.

► I would suggest you to turn on USB selective suspense.
USB Selective Suspend - Turn On or Off

► And, if there are any drives attached with USB, remove those. Any internal error of those may caust the thing.

3 more replies
Relevance 62.73%
Question: BSOD random times

I usually get BSOD whenever a game is running, it rarely happens at any other time than that. But the times that it happens are random.
I've added the info requested by the sticky.
Thank you

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7
- an OEM or full retail version? Full retail

- What is the age of system (hardware)? 4-5 Months
- What is the age of OS installation (have you re-installed the OS?) About 3 months

Answer:BSOD random times

  
Quote: Originally Posted by duoheero


I usually get BSOD whenever a game is running, it rarely happens at any other time than that. But the times that it happens are random.
I've added the info requested by the sticky.
Thank you

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7
- an OEM or full retail version? Full retail

- What is the age of system (hardware)? 4-5 Months
- What is the age of OS installation (have you re-installed the OS?) About 3 months


With 5 different causes I am thinking hardware. The most recent ones point to it. Please run these two tests.
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk ... Read more

1 more replies
Relevance 62.73%

I am still getting BSOD. I uploaded the latest file. I would appreciate any help you can provide. This is becoming very frustrating.

Thanks

Answer:BSOD at random times

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Uninstall Avast and use Windows Defender as alternative, Avast has been flagged multiple times in multiple crashes.
Avast - Uninstall Completely - Windows 7 Help Forums

Try to update the BIOS to version 2.0
MSI Global | Motherboard - The world leader in motherboard design

These I see a lot returning, Avast drivers.

Code:
ffffd001`438997b8 fffff800`69053dd0Unable to load image aswSP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSP.sys
aswSP+0x43dd0
ffffd000`bc3f6798 fffff801`2993171dUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5171d
A BIOS update sometimes fixes graphics drivers crashing.

Code:
ffffd001`22dd64e8 fffff801`f4c9ebb9Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x5ebb9

0 more replies
Relevance 62.73%
Question: BSOD Random times.

I've had numerous BSOD crashes recently. The past two have occurred around 5 hours of pc uptime. At the time i was skyping and watching a youtube video, for both of these times.
Help would be appreciated.

W8INTELJAMES-14_01_2015_224732_27.zip

Specs:
Windows 8.1 64bit
Intel 4790k
Geforce 660ti
16GB Ram.

Answer:BSOD Random times.

Hi Reddax & Welcome to the forums ^_^,

I am extremely sorry for the delayed response. There are not BSOD Analysts and at times, things get really hectic
Do you still need help? If yes, I will reply back within 24 hours and will be notified by email when you post back.
-Pranav

4 more replies
Relevance 62.73%

Hello,

Recently ive been getting the BSOD at completely random times. It happens browsing the internet, playing games, or even when im not using my computer at all and only the desktop is displayed. Sometimes it will happen once every couple of days, and sometimes it can happen three times in ten minutes. Attached are the files I believe you need to help me.

Thanks

Answer:BSOD at random times

Code:
BugCheck FE, {8, 6, 5, fffffa800b7d8160}

Probably caused by : usbhub.sys ( usbhub!UsbhHubProcessChangeWorker+ec )

Code:
Usual causes: USB device driver
There's seems to be a issue with some of the USB drivers, follow these steps:Start
Type: Device Manager
Expand USB Controllers
Uninstall driver (for every listed device)
Reboot
The drivers should now be automatically reconfigured by Windows upon reboot.

If you are using any USB devices, then remove these from the USB ports (leave keyboard and mouse), and then update all the devices with the latest drivers, including the mouse and keyboard if applicable.

Turn off USB Suspension:USB Selective Suspend - Turn On or Off
Reduce the number of programs at startup, to avoid any driver or program conflicts:Troubleshoot Application Conflicts by Performing a Clean Startup
Startup Programs - Change

1 more replies
Relevance 62.73%

Hi I have been experiencing BSOD for the past couple of days and I had this problem a while ago but that was solved but now I have no clue what is going on. So I would appreciate if someone could shed some light on the problem that are occurring.

Answer:BSOD at random times

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system.

I prefer TotalMounter as my CD/DVD virtualization software as it allows me to burn images to a virtual CD/DVD if I just want an ISO file instead of a disc, and it is free.

Many use MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor as well, which is also free.
All crashes are related to your graphics card drivers. Check your drivers and DirectX installation. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the drivers yo... Read more

4 more replies
Relevance 62.73%
Question: BSOD random times

Hey Guys,
Thanks for taking the time to review my information. I'm an IT professional and usually solve these on my own, but this one only gives me general information that I am lost with, so here I come for the BSOD experts to help!

From what I can tell it's a DRIVER_IRQL_NOT_LESS_OR_EQUAL with code 0x0000000d1 caused by ks.sys.

It's an i7-2600k on a Z77A-G45 Thunderbolt MB by MSI. I had used this rig for a long time as my main machine on windows 8.1, then upgraded the system to a new motherboard and cpu. I then started having some sync issues with some streaming I do with a BlackMagic Intensity Pro card using MS expression encoder 3 that I didn't have (sync issues) on this mb, so I decided to put these parts back to good use and have a pc just for this function.
It's running a Crucial CT256MX100SSD1 harddisk as it's only drive with the latest firmware. (MU02)
I don't know what power supply I have in it at the moment as I'm at work, but it's some cheap one that I had laying around.

So basically I cloned the harddisk that is now in the upgraded system, that was originally running this MB combo, uninstalled/reinstalled drivers for it all and got it working perfectly, or so I thought.

I've had 3 BSOD's now that happen randomly. Hopefully you'll see something in the attached files that will be an easy smoking gun to resolve this. I really don't want to install from scratch.

Thanks again for any guidance you can provide!
James

More replies
Relevance 62.73%

I am still getting BSOD. I uploaded the latest file. I would appreciate any help you can provide. This is becoming very frustrating.

Thanks

Answer:BSOD at random times

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Uninstall Avast and use Windows Defender as alternative, Avast has been flagged multiple times in multiple crashes.
Avast - Uninstall Completely - Windows 7 Help Forums

Try to update the BIOS to version 2.0
MSI Global | Motherboard - The world leader in motherboard design

These I see a lot returning, Avast drivers.

Code:
ffffd001`438997b8 fffff800`69053dd0Unable to load image aswSP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSP.sys
aswSP+0x43dd0
ffffd000`bc3f6798 fffff801`2993171dUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x5171d

A BIOS update sometimes fixes graphics drivers crashing.

Code:
ffffd001`22dd64e8 fffff801`f4c9ebb9Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x5ebb9

2 more replies
Relevance 62.73%

Hi

Recently, my laptop has been restarting by itself at random times. First i get a blue screen wit some things written on it, and then a second later the laptop restarts itself.

I don't know how it happened, or wat happened. I tried scanning for viruses, but nothing. It could be registry problem as such, and if that's the case I don't know how to fix it. Please help!

By the way, i'm using an Acer 5530G, vista home premium x32bit, 4GB ram, 320GB HDD.

Please help! Or at least show that ur interested in helping.................coz i haven't been getting much responses to my problems whenever i post a problem.

Thank you

Answer:Getting BSOD at random times

Hello and welcome to Bleeping Computer.Please subscribe to your topic so that you will be notified as soon as I post a reply, instead of you having to check the topic all of the time. This will allow you to get an email notification when I reply.To subscribe, go to your topic, and at the top right hand corner by your first post, click the Options button and then click Track this topic. The bullet the immediate notification bubble. Then press submit.Lets take a look with MalwarebytesPlease download Malwarebytes' Anti-Malware from here:MalwarebytesPlease rename the file BEFORE downloading to zztoy.exe instead of mbam-setup.exeMBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Double Click zztoy.exe to install the application.* Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.* If an update is found, it will download and install the latest version.* Once the program has loaded, select "Perform Full Scan", then click Scan.* The scan may take some time to finish,so please be patient.* When the scan is complete, click OK, then Show Results to view the results.* Make sure that everything is checked, and click Remove Selected.* When disinfection is completed, a log will open in Notepad and y... Read more

9 more replies
Relevance 62.73%

I hope someone can help me, i?m swedish so i?m not the best english speaker.

Answer:I get BSOD at random times

Code:
System Manufacturer/Model Number Custom
OS Windows 7 Ultimate x64
CPU Intel i7 4th gen
Motherboard Asus z87 a
Memory corsair 16 gb 4 gb each
Graphics Card geforce gtx 650

Code:
Product ID: 00426-OEM-8992662-00006
Its looks like you are using an ACER OEM on a retail motherboard. Please do this:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

6 more replies
Relevance 62.73%

Hello gentlemen!

I need some help, I am getting BSOD's of "ATTEMPTED_WRITE_TO_READONLY_MEMORY".

I am running SFC /SCANNOW already, but here are the log files:

DESKTOP-MSF4MPQ-15_11_2016_102039,91.zip

I recently configured to generate mini-dumps!

EDIT

Just after I posted, I got another BSOD. Here is the newer dump.

DESKTOP-MSF4MPQ-15_11_2016_103818,50.zip

Thanks!

More replies